diff options
Diffstat (limited to 'arch/powerpc/platforms/cell/interrupt.c')
-rw-r--r-- | arch/powerpc/platforms/cell/interrupt.c | 396 |
1 files changed, 174 insertions, 222 deletions
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 97936f547f1..9d5da789689 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -1,6 +1,9 @@ /* * Cell Internal Interrupt Controller * + * Copyright (C) 2006 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * IBM, Corp. + * * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 * * Author: Arnd Bergmann <arndb@de.ibm.com> @@ -25,11 +28,13 @@ #include <linux/module.h> #include <linux/percpu.h> #include <linux/types.h> +#include <linux/ioport.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> #include <asm/ptrace.h> +#include <asm/machdep.h> #include "interrupt.h" #include "cbe_regs.h" @@ -39,9 +44,25 @@ struct iic { u8 target_id; u8 eoi_stack[16]; int eoi_ptr; + struct irq_host *host; }; static DEFINE_PER_CPU(struct iic, iic); +#define IIC_NODE_COUNT 2 +static struct irq_host *iic_hosts[IIC_NODE_COUNT]; + +/* Convert between "pending" bits and hw irq number */ +static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits) +{ + unsigned char unit = bits.source & 0xf; + + if (bits.flags & CBE_IIC_IRQ_IPI) + return IIC_IRQ_IPI0 | (bits.prio >> 4); + else if (bits.class <= 3) + return (bits.class << 4) | unit; + else + return IIC_IRQ_INVALID; +} static void iic_mask(unsigned int irq) { @@ -65,197 +86,21 @@ static struct irq_chip iic_chip = { .eoi = iic_eoi, }; -/* XXX All of this has to be reworked completely. We need to assign a real - * interrupt numbers to the external interrupts and remove all the hard coded - * interrupt maps (rely on the device-tree whenever possible). - * - * Basically, my scheme is to define the "pendings" bits to be the HW interrupt - * number (ignoring the data and flags here). That means we can sort-of split - * external sources based on priority, and we can use request_irq() on pretty - * much anything. - * - * For spider or axon, they have their own interrupt space. spider will just have - * local "hardward" interrupts 0...xx * node stride. The node stride is not - * necessary (separate interrupt chips will have separate HW number space), but - * will allow to be compatible with existing device-trees. - * - * All of thise little world will get a standard remapping scheme to map those HW - * numbers into the linux flat irq number space. -*/ -static int iic_external_get_irq(struct cbe_iic_pending_bits pending) -{ - int irq; - unsigned char node, unit; - - node = pending.source >> 4; - unit = pending.source & 0xf; - irq = -1; - - /* - * This mapping is specific to the Cell Broadband - * Engine. We might need to get the numbers - * from the device tree to support future CPUs. - */ - switch (unit) { - case 0x00: - case 0x0b: - /* - * One of these units can be connected - * to an external interrupt controller. - */ - if (pending.class != 2) - break; - /* TODO: We might want to silently ignore cascade interrupts - * when no cascade handler exist yet - */ - irq = IIC_EXT_CASCADE + node * IIC_NODE_STRIDE; - break; - case 0x01 ... 0x04: - case 0x07 ... 0x0a: - /* - * These units are connected to the SPEs - */ - if (pending.class > 2) - break; - irq = IIC_SPE_OFFSET - + pending.class * IIC_CLASS_STRIDE - + node * IIC_NODE_STRIDE - + unit; - break; - } - if (irq == -1) - printk(KERN_WARNING "Unexpected interrupt class %02x, " - "source %02x, prio %02x, cpu %02x\n", pending.class, - pending.source, pending.prio, smp_processor_id()); - return irq; -} - /* Get an IRQ number from the pending state register of the IIC */ -int iic_get_irq(struct pt_regs *regs) -{ - struct iic *iic; - int irq; - struct cbe_iic_pending_bits pending; - - iic = &__get_cpu_var(iic); - *(unsigned long *) &pending = - in_be64((unsigned long __iomem *) &iic->regs->pending_destr); - iic->eoi_stack[++iic->eoi_ptr] = pending.prio; - BUG_ON(iic->eoi_ptr > 15); - - irq = -1; - if (pending.flags & CBE_IIC_IRQ_VALID) { - if (pending.flags & CBE_IIC_IRQ_IPI) { - irq = IIC_IPI_OFFSET + (pending.prio >> 4); -/* - if (irq > 0x80) - printk(KERN_WARNING "Unexpected IPI prio %02x" - "on CPU %02x\n", pending.prio, - smp_processor_id()); -*/ - } else { - irq = iic_external_get_irq(pending); - } - } - return irq; -} - -/* hardcoded part to be compatible with older firmware */ - -static int __init setup_iic_hardcoded(void) -{ - struct device_node *np; - int nodeid, cpu; - unsigned long regs; - struct iic *iic; - - for_each_possible_cpu(cpu) { - iic = &per_cpu(iic, cpu); - nodeid = cpu/2; - - for (np = of_find_node_by_type(NULL, "cpu"); - np; - np = of_find_node_by_type(np, "cpu")) { - if (nodeid == *(int *)get_property(np, "node-id", NULL)) - break; - } - - if (!np) { - printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); - iic->regs = NULL; - iic->target_id = 0xff; - return -ENODEV; - } - - regs = *(long *)get_property(np, "iic", NULL); - - /* hack until we have decided on the devtree info */ - regs += 0x400; - if (cpu & 1) - regs += 0x20; - - printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs); - iic->regs = ioremap(regs, sizeof(struct cbe_iic_thread_regs)); - iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe); - iic->eoi_stack[0] = 0xff; - } - - return 0; -} - -static int __init setup_iic(void) +static unsigned int iic_get_irq(struct pt_regs *regs) { - struct device_node *dn; - unsigned long *regs; - char *compatible; - unsigned *np, found = 0; - struct iic *iic = NULL; - - for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { - compatible = (char *)get_property(dn, "compatible", NULL); - - if (!compatible) { - printk(KERN_WARNING "no compatible property found !\n"); - continue; - } - - if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller")) - regs = (unsigned long *)get_property(dn,"reg", NULL); - else - continue; - - if (!regs) - printk(KERN_WARNING "IIC: no reg property\n"); - - np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL); - - if (!np) { - printk(KERN_WARNING "IIC: CPU association not found\n"); - iic->regs = NULL; - iic->target_id = 0xff; - return -ENODEV; - } - - iic = &per_cpu(iic, np[0]); - iic->regs = ioremap(regs[0], sizeof(struct cbe_iic_thread_regs)); - iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe); - iic->eoi_stack[0] = 0xff; - printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs); - - iic = &per_cpu(iic, np[1]); - iic->regs = ioremap(regs[2], sizeof(struct cbe_iic_thread_regs)); - iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe); - iic->eoi_stack[0] = 0xff; - - printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs); - - found++; - } - - if (found) - return 0; - else - return -ENODEV; + struct cbe_iic_pending_bits pending; + struct iic *iic; + + iic = &__get_cpu_var(iic); + *(unsigned long *) &pending = + in_be64((unsigned long __iomem *) &iic->regs->pending_destr); + iic->eoi_stack[++iic->eoi_ptr] = pending.prio; + BUG_ON(iic->eoi_ptr > 15); + if (pending.flags & CBE_IIC_IRQ_VALID) + return irq_linear_revmap(iic->host, + iic_pending_to_hwnum(pending)); + return NO_IRQ; } #ifdef CONFIG_SMP @@ -263,12 +108,12 @@ static int __init setup_iic(void) /* Use the highest interrupt priorities for IPI */ static inline int iic_ipi_to_irq(int ipi) { - return IIC_IPI_OFFSET + IIC_NUM_IPIS - 1 - ipi; + return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi; } static inline int iic_irq_to_ipi(int irq) { - return IIC_NUM_IPIS - 1 - (irq - IIC_IPI_OFFSET); + return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0); } void iic_setup_cpu(void) @@ -287,22 +132,51 @@ u8 iic_get_target_id(int cpu) } EXPORT_SYMBOL_GPL(iic_get_target_id); +struct irq_host *iic_get_irq_host(int node) +{ + if (node < 0 || node >= IIC_NODE_COUNT) + return NULL; + return iic_hosts[node]; +} +EXPORT_SYMBOL_GPL(iic_get_irq_host); + + static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) { - smp_message_recv(iic_irq_to_ipi(irq), regs); + int ipi = (int)(long)dev_id; + + smp_message_recv(ipi, regs); + return IRQ_HANDLED; } static void iic_request_ipi(int ipi, const char *name) { - int irq; + int node, virq; - irq = iic_ipi_to_irq(ipi); - - /* IPIs are marked IRQF_DISABLED as they must run with irqs - * disabled */ - set_irq_chip_and_handler(irq, &iic_chip, handle_percpu_irq); - request_irq(irq, iic_ipi_action, IRQF_DISABLED, name, NULL); + for (node = 0; node < IIC_NODE_COUNT; node++) { + char *rname; + if (iic_hosts[node] == NULL) + continue; + virq = irq_create_mapping(iic_hosts[node], + iic_ipi_to_irq(ipi), 0); + if (virq == NO_IRQ) { + printk(KERN_ERR + "iic: failed to map IPI %s on node %d\n", + name, node); + continue; + } + rname = kzalloc(strlen(name) + 16, GFP_KERNEL); + if (rname) + sprintf(rname, "%s node %d", name, node); + else + rname = (char *)name; + if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, + rname, (void *)(long)ipi)) + printk(KERN_ERR + "iic: failed to request IPI %s on node %d\n", + name, node); + } } void iic_request_IPIs(void) @@ -313,41 +187,119 @@ void iic_request_IPIs(void) iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); #endif /* CONFIG_DEBUGGER */ } + #endif /* CONFIG_SMP */ -static void __init iic_setup_builtin_handlers(void) + +static int iic_host_match(struct irq_host *h, struct device_node *node) +{ + return h->host_data != NULL && node == h->host_data; +} + +static int iic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw, unsigned int flags) +{ + if (hw < IIC_IRQ_IPI0) + set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq); + else + set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq); + return 0; +} + +static int iic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) + { - int be, isrc; + /* Currently, we don't translate anything. That needs to be fixed as + * we get better defined device-trees. iic interrupts have to be + * explicitely mapped by whoever needs them + */ + return -ENODEV; +} + +static struct irq_host_ops iic_host_ops = { + .match = iic_host_match, + .map = iic_host_map, + .xlate = iic_host_xlate, +}; + +static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr, + struct irq_host *host) +{ + /* XXX FIXME: should locate the linux CPU number from the HW cpu + * number properly. We are lucky for now + */ + struct iic *iic = &per_cpu(iic, hw_cpu); - /* XXX FIXME: Assume two threads per BE are present */ - for (be=0; be < num_present_cpus() / 2; be++) { - int irq; + iic->regs = ioremap(addr, sizeof(struct cbe_iic_thread_regs)); + BUG_ON(iic->regs == NULL); - /* setup SPE chip and handlers */ - for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) { - irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc; - set_irq_chip_and_handler(irq, &iic_chip, handle_fasteoi_irq); + iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe); + iic->eoi_stack[0] = 0xff; + iic->host = host; + out_be64(&iic->regs->prio, 0); + + printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n", + hw_cpu, addr, iic->regs, iic->target_id); +} + +static int __init setup_iic(void) +{ + struct device_node *dn; + struct resource r0, r1; + struct irq_host *host; + int found = 0; + u32 *np; + + for (dn = NULL; + (dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) { + if (!device_is_compatible(dn, + "IBM,CBEA-Internal-Interrupt-Controller")) + continue; + np = (u32 *)get_property(dn, "ibm,interrupt-server-ranges", + NULL); + if (np == NULL) { + printk(KERN_WARNING "IIC: CPU association not found\n"); + of_node_put(dn); + return -ENODEV; } - /* setup cascade chip */ - irq = IIC_EXT_CASCADE + be * IIC_NODE_STRIDE; - set_irq_chip_and_handler(irq, &iic_chip, handle_fasteoi_irq); + if (of_address_to_resource(dn, 0, &r0) || + of_address_to_resource(dn, 1, &r1)) { + printk(KERN_WARNING "IIC: Can't resolve addresses\n"); + of_node_put(dn); + return -ENODEV; + } + host = NULL; + if (found < IIC_NODE_COUNT) { + host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + IIC_SOURCE_COUNT, + &iic_host_ops, + IIC_IRQ_INVALID); + iic_hosts[found] = host; + BUG_ON(iic_hosts[found] == NULL); + iic_hosts[found]->host_data = of_node_get(dn); + found++; + } + init_one_iic(np[0], r0.start, host); + init_one_iic(np[1], r1.start, host); } + + if (found) + return 0; + else + return -ENODEV; } void __init iic_init_IRQ(void) { - int cpu, irq_offset; - struct iic *iic; - + /* Discover and initialize iics */ if (setup_iic() < 0) - setup_iic_hardcoded(); + panic("IIC: Failed to initialize !\n"); - irq_offset = 0; - for_each_possible_cpu(cpu) { - iic = &per_cpu(iic, cpu); - if (iic->regs) - out_be64(&iic->regs->prio, 0xff); - } - iic_setup_builtin_handlers(); + /* Set master interrupt handling function */ + ppc_md.get_irq = iic_get_irq; + /* Enable on current CPU */ + iic_setup_cpu(); } |