summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/chrp/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/chrp/setup.c')
-rw-r--r--arch/powerpc/platforms/chrp/setup.c522
1 files changed, 522 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
new file mode 100644
index 00000000000..ecd32d5d85f
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -0,0 +1,522 @@
+/*
+ * arch/ppc/platforms/setup.c
+ *
+ * Copyright (C) 1995 Linus Torvalds
+ * Adapted from 'alpha' version by Gary Thomas
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/version.h>
+#include <linux/adb.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/console.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/prom.h>
+#include <asm/gg2.h>
+#include <asm/pci-bridge.h>
+#include <asm/dma.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/hydra.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+#include <asm/btext.h>
+#include <asm/i8259.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+#include <asm/xmon.h>
+
+#include "chrp.h"
+
+void rtas_indicator_progress(char *, unsigned short);
+void btext_progress(char *, unsigned short);
+
+int _chrp_type;
+EXPORT_SYMBOL(_chrp_type);
+
+struct mpic *chrp_mpic;
+
+/*
+ * XXX this should be in xmon.h, but putting it there means xmon.h
+ * has to include <linux/interrupt.h> (to get irqreturn_t), which
+ * causes all sorts of problems. -- paulus
+ */
+extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+
+extern unsigned long loops_per_jiffy;
+
+#ifdef CONFIG_SMP
+extern struct smp_ops_t chrp_smp_ops;
+#endif
+
+static const char *gg2_memtypes[4] = {
+ "FPM", "SDRAM", "EDO", "BEDO"
+};
+static const char *gg2_cachesizes[4] = {
+ "256 KB", "512 KB", "1 MB", "Reserved"
+};
+static const char *gg2_cachetypes[4] = {
+ "Asynchronous", "Reserved", "Flow-Through Synchronous",
+ "Pipelined Synchronous"
+};
+static const char *gg2_cachemodes[4] = {
+ "Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
+};
+
+void chrp_show_cpuinfo(struct seq_file *m)
+{
+ int i, sdramen;
+ unsigned int t;
+ struct device_node *root;
+ const char *model = "";
+
+ root = find_path_device("/");
+ if (root)
+ model = get_property(root, "model", NULL);
+ seq_printf(m, "machine\t\t: CHRP %s\n", model);
+
+ /* longtrail (goldengate) stuff */
+ if (!strncmp(model, "IBM,LongTrail", 13)) {
+ /* VLSI VAS96011/12 `Golden Gate 2' */
+ /* Memory banks */
+ sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
+ >>31) & 1;
+ for (i = 0; i < (sdramen ? 4 : 6); i++) {
+ t = in_le32(gg2_pci_config_base+
+ GG2_PCI_DRAM_BANK0+
+ i*4);
+ if (!(t & 1))
+ continue;
+ switch ((t>>8) & 0x1f) {
+ case 0x1f:
+ model = "4 MB";
+ break;
+ case 0x1e:
+ model = "8 MB";
+ break;
+ case 0x1c:
+ model = "16 MB";
+ break;
+ case 0x18:
+ model = "32 MB";
+ break;
+ case 0x10:
+ model = "64 MB";
+ break;
+ case 0x00:
+ model = "128 MB";
+ break;
+ default:
+ model = "Reserved";
+ break;
+ }
+ seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
+ gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
+ }
+ /* L2 cache */
+ t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
+ seq_printf(m, "board l2\t: %s %s (%s)\n",
+ gg2_cachesizes[(t>>7) & 3],
+ gg2_cachetypes[(t>>2) & 3],
+ gg2_cachemodes[t & 3]);
+ }
+}
+
+/*
+ * Fixes for the National Semiconductor PC78308VUL SuperI/O
+ *
+ * Some versions of Open Firmware incorrectly initialize the IRQ settings
+ * for keyboard and mouse
+ */
+static inline void __init sio_write(u8 val, u8 index)
+{
+ outb(index, 0x15c);
+ outb(val, 0x15d);
+}
+
+static inline u8 __init sio_read(u8 index)
+{
+ outb(index, 0x15c);
+ return inb(0x15d);
+}
+
+static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
+ u8 type)
+{
+ u8 level0, type0, active;
+
+ /* select logical device */
+ sio_write(device, 0x07);
+ active = sio_read(0x30);
+ level0 = sio_read(0x70);
+ type0 = sio_read(0x71);
+ if (level0 != level || type0 != type || !active) {
+ printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
+ "remapping to level %d, type %d, active\n",
+ name, level0, type0, !active ? "in" : "", level, type);
+ sio_write(0x01, 0x30);
+ sio_write(level, 0x70);
+ sio_write(type, 0x71);
+ }
+}
+
+static void __init sio_init(void)
+{
+ struct device_node *root;
+
+ if ((root = find_path_device("/")) &&
+ !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
+ /* logical device 0 (KBC/Keyboard) */
+ sio_fixup_irq("keyboard", 0, 1, 2);
+ /* select logical device 1 (KBC/Mouse) */
+ sio_fixup_irq("mouse", 1, 12, 2);
+ }
+}
+
+
+static void __init pegasos_set_l2cr(void)
+{
+ struct device_node *np;
+
+ /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
+ if (_chrp_type != _CHRP_Pegasos)
+ return;
+
+ /* Enable L2 cache if needed */
+ np = find_type_devices("cpu");
+ if (np != NULL) {
+ unsigned int *l2cr = (unsigned int *)
+ get_property (np, "l2cr", NULL);
+ if (l2cr == NULL) {
+ printk ("Pegasos l2cr : no cpu l2cr property found\n");
+ return;
+ }
+ if (!((*l2cr) & 0x80000000)) {
+ printk ("Pegasos l2cr : L2 cache was not active, "
+ "activating\n");
+ _set_L2CR(0);
+ _set_L2CR((*l2cr) | 0x80000000);
+ }
+ }
+}
+
+void __init chrp_setup_arch(void)
+{
+ struct device_node *root = find_path_device ("/");
+ char *machine = NULL;
+ struct device_node *device;
+ unsigned int *p = NULL;
+
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000/HZ;
+
+ if (root)
+ machine = get_property(root, "model", NULL);
+ if (machine && strncmp(machine, "Pegasos", 7) == 0) {
+ _chrp_type = _CHRP_Pegasos;
+ } else if (machine && strncmp(machine, "IBM", 3) == 0) {
+ _chrp_type = _CHRP_IBM;
+ } else if (machine && strncmp(machine, "MOT", 3) == 0) {
+ _chrp_type = _CHRP_Motorola;
+ } else {
+ /* Let's assume it is an IBM chrp if all else fails */
+ _chrp_type = _CHRP_IBM;
+ }
+ printk("chrp type = %x\n", _chrp_type);
+
+ rtas_initialize();
+ if (rtas_token("display-character") >= 0)
+ ppc_md.progress = rtas_progress;
+
+#ifdef CONFIG_BOOTX_TEXT
+ if (ppc_md.progress == NULL && boot_text_mapped)
+ ppc_md.progress = btext_progress;
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ /* this is fine for chrp */
+ initrd_below_start_ok = 1;
+
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+ ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
+
+ /* On pegasos, enable the L2 cache if not already done by OF */
+ pegasos_set_l2cr();
+
+ /* Lookup PCI host bridges */
+ chrp_find_bridges();
+
+ /*
+ * Temporary fixes for PCI devices.
+ * -- Geert
+ */
+ hydra_init(); /* Mac I/O */
+
+ /*
+ * Fix the Super I/O configuration
+ */
+ sio_init();
+
+ /* Get the event scan rate for the rtas so we know how
+ * often it expects a heartbeat. -- Cort
+ */
+ device = find_devices("rtas");
+ if (device)
+ p = (unsigned int *) get_property
+ (device, "rtas-event-scan-rate", NULL);
+ if (p && *p) {
+ ppc_md.heartbeat = chrp_event_scan;
+ ppc_md.heartbeat_reset = HZ / (*p * 30) - 1;
+ ppc_md.heartbeat_count = 1;
+ printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
+ *p, ppc_md.heartbeat_reset);
+ }
+
+ pci_create_OF_bus_map();
+
+ /*
+ * Print the banner, then scroll down so boot progress
+ * can be printed. -- Cort
+ */
+ if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
+}
+
+void
+chrp_event_scan(void)
+{
+ unsigned char log[1024];
+ int ret = 0;
+
+ /* XXX: we should loop until the hardware says no more error logs -- Cort */
+ rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
+ __pa(log), 1024);
+ ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
+}
+
+/*
+ * Finds the open-pic node and sets up the mpic driver.
+ */
+static void __init chrp_find_openpic(void)
+{
+ struct device_node *np, *root;
+ int len, i, j, irq_count;
+ int isu_size, idu_size;
+ unsigned int *iranges, *opprop = NULL;
+ int oplen = 0;
+ unsigned long opaddr;
+ int na = 1;
+ unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
+
+ np = find_type_devices("open-pic");
+ if (np == NULL)
+ return;
+ root = find_path_device("/");
+ if (root) {
+ opprop = (unsigned int *) get_property
+ (root, "platform-open-pic", &oplen);
+ na = prom_n_addr_cells(root);
+ }
+ if (opprop && oplen >= na * sizeof(unsigned int)) {
+ opaddr = opprop[na-1]; /* assume 32-bit */
+ oplen /= na * sizeof(unsigned int);
+ } else {
+ if (np->n_addrs == 0)
+ return;
+ opaddr = np->addrs[0].address;
+ oplen = 0;
+ }
+
+ printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
+
+ irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
+ prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4);
+
+ iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
+ if (iranges == NULL)
+ len = 0; /* non-distributed mpic */
+ else
+ len /= 2 * sizeof(unsigned int);
+
+ /*
+ * The first pair of cells in interrupt-ranges refers to the
+ * IDU; subsequent pairs refer to the ISUs.
+ */
+ if (oplen < len) {
+ printk(KERN_ERR "Insufficient addresses for distributed"
+ " OpenPIC (%d < %d)\n", np->n_addrs, len);
+ len = oplen;
+ }
+
+ isu_size = 0;
+ idu_size = 0;
+ if (len > 0 && iranges[1] != 0) {
+ printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
+ iranges[0], iranges[0] + iranges[1] - 1);
+ idu_size = iranges[1];
+ }
+ if (len > 1)
+ isu_size = iranges[3];
+
+ chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY,
+ isu_size, NUM_ISA_INTERRUPTS, irq_count,
+ NR_IRQS - 4, init_senses, irq_count,
+ " MPIC ");
+ if (chrp_mpic == NULL) {
+ printk(KERN_ERR "Failed to allocate MPIC structure\n");
+ return;
+ }
+
+ j = na - 1;
+ for (i = 1; i < len; ++i) {
+ iranges += 2;
+ j += na;
+ printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
+ iranges[0], iranges[0] + iranges[1] - 1,
+ opprop[j]);
+ mpic_assign_isu(chrp_mpic, i - 1, opprop[j]);
+ }
+
+ mpic_init(chrp_mpic);
+ mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+}
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+static struct irqaction xmon_irqaction = {
+ .handler = xmon_irq,
+ .mask = CPU_MASK_NONE,
+ .name = "XMON break",
+};
+#endif
+
+void __init chrp_init_IRQ(void)
+{
+ struct device_node *np;
+ unsigned long chrp_int_ack = 0;
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+ struct device_node *kbd;
+#endif
+
+ for (np = find_devices("pci"); np != NULL; np = np->next) {
+ unsigned int *addrp = (unsigned int *)
+ get_property(np, "8259-interrupt-acknowledge", NULL);
+
+ if (addrp == NULL)
+ continue;
+ chrp_int_ack = addrp[prom_n_addr_cells(np)-1];
+ break;
+ }
+ if (np == NULL)
+ printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
+
+ chrp_find_openpic();
+
+ i8259_init(chrp_int_ack, 0);
+
+ if (_chrp_type == _CHRP_Pegasos)
+ ppc_md.get_irq = i8259_irq;
+ else
+ ppc_md.get_irq = mpic_get_irq;
+
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+ /* see if there is a keyboard in the device tree
+ with a parent of type "adb" */
+ for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
+ if (kbd->parent && kbd->parent->type
+ && strcmp(kbd->parent->type, "adb") == 0)
+ break;
+ if (kbd)
+ setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
+#endif
+}
+
+void __init
+chrp_init2(void)
+{
+#ifdef CONFIG_NVRAM
+ chrp_nvram_init();
+#endif
+
+ request_region(0x20,0x20,"pic1");
+ request_region(0xa0,0x20,"pic2");
+ request_region(0x00,0x20,"dma1");
+ request_region(0x40,0x20,"timer");
+ request_region(0x80,0x10,"dma page reg");
+ request_region(0xc0,0x20,"dma2");
+
+ if (ppc_md.progress)
+ ppc_md.progress(" Have fun! ", 0x7777);
+}
+
+void __init chrp_init(void)
+{
+ ISA_DMA_THRESHOLD = ~0L;
+ DMA_MODE_READ = 0x44;
+ DMA_MODE_WRITE = 0x48;
+ isa_io_base = CHRP_ISA_IO_BASE; /* default value */
+ ppc_do_canonicalize_irqs = 1;
+
+ /* Assume we have an 8259... */
+ __irq_offset_value = NUM_ISA_INTERRUPTS;
+
+ ppc_md.setup_arch = chrp_setup_arch;
+ ppc_md.show_cpuinfo = chrp_show_cpuinfo;
+
+ ppc_md.init_IRQ = chrp_init_IRQ;
+ ppc_md.init = chrp_init2;
+
+ ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
+
+ ppc_md.restart = rtas_restart;
+ ppc_md.power_off = rtas_power_off;
+ ppc_md.halt = rtas_halt;
+
+ ppc_md.time_init = chrp_time_init;
+ ppc_md.set_rtc_time = chrp_set_rtc_time;
+ ppc_md.get_rtc_time = chrp_get_rtc_time;
+ ppc_md.calibrate_decr = chrp_calibrate_decr;
+
+#ifdef CONFIG_SMP
+ smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
+}
+
+#ifdef CONFIG_BOOTX_TEXT
+void
+btext_progress(char *s, unsigned short hex)
+{
+ btext_drawstring(s);
+ btext_drawstring("\n");
+}
+#endif /* CONFIG_BOOTX_TEXT */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 03:35:57 +0000