diff options
Diffstat (limited to 'arch/powerpc/platforms/chrp/time.c')
-rw-r--r-- | arch/powerpc/platforms/chrp/time.c | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c new file mode 100644 index 00000000000..737ee5d9f0a --- /dev/null +++ b/arch/powerpc/platforms/chrp/time.c @@ -0,0 +1,187 @@ +/* + * arch/ppc/platforms/chrp_time.c + * + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * Adapted for PowerPC (PReP) by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu). + * Copied and modified from arch/i386/kernel/time.c + * + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/kernel_stat.h> +#include <linux/mc146818rtc.h> +#include <linux/init.h> +#include <linux/bcd.h> + +#include <asm/io.h> +#include <asm/nvram.h> +#include <asm/prom.h> +#include <asm/sections.h> +#include <asm/time.h> + +extern spinlock_t rtc_lock; + +static int nvram_as1 = NVRAM_AS1; +static int nvram_as0 = NVRAM_AS0; +static int nvram_data = NVRAM_DATA; + +long __init chrp_time_init(void) +{ + struct device_node *rtcs; + int base; + + rtcs = find_compatible_devices("rtc", "pnpPNP,b00"); + if (rtcs == NULL) + rtcs = find_compatible_devices("rtc", "ds1385-rtc"); + if (rtcs == NULL || rtcs->addrs == NULL) + return 0; + base = rtcs->addrs[0].address; + nvram_as1 = 0; + nvram_as0 = base; + nvram_data = base + 1; + + return 0; +} + +int chrp_cmos_clock_read(int addr) +{ + if (nvram_as1 != 0) + outb(addr>>8, nvram_as1); + outb(addr, nvram_as0); + return (inb(nvram_data)); +} + +void chrp_cmos_clock_write(unsigned long val, int addr) +{ + if (nvram_as1 != 0) + outb(addr>>8, nvram_as1); + outb(addr, nvram_as0); + outb(val, nvram_data); + return; +} + +/* + * Set the hardware clock. -- Cort + */ +int chrp_set_rtc_time(struct rtc_time *tmarg) +{ + unsigned char save_control, save_freq_select; + struct rtc_time tm = *tmarg; + + spin_lock(&rtc_lock); + + save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */ + + chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ + + chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BIN_TO_BCD(tm.tm_sec); + BIN_TO_BCD(tm.tm_min); + BIN_TO_BCD(tm.tm_hour); + BIN_TO_BCD(tm.tm_mon); + BIN_TO_BCD(tm.tm_mday); + BIN_TO_BCD(tm.tm_year); + } + chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS); + chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES); + chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS); + chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH); + chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH); + chrp_cmos_clock_write(tm.tm_year,RTC_YEAR); + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + chrp_cmos_clock_write(save_control, RTC_CONTROL); + chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT); + + spin_unlock(&rtc_lock); + return 0; +} + +void chrp_get_rtc_time(struct rtc_time *tm) +{ + unsigned int year, mon, day, hour, min, sec; + int uip, i; + + /* The Linux interpretation of the CMOS clock register contents: + * When the Update-In-Progress (UIP) flag goes from 1 to 0, the + * RTC registers show the second which has precisely just started. + * Let's hope other operating systems interpret the RTC the same way. + */ + + /* Since the UIP flag is set for about 2.2 ms and the clock + * is typically written with a precision of 1 jiffy, trying + * to obtain a precision better than a few milliseconds is + * an illusion. Only consistency is interesting, this also + * allows to use the routine for /dev/rtc without a potential + * 1 second kernel busy loop triggered by any reader of /dev/rtc. + */ + + for ( i = 0; i<1000000; i++) { + uip = chrp_cmos_clock_read(RTC_FREQ_SELECT); + sec = chrp_cmos_clock_read(RTC_SECONDS); + min = chrp_cmos_clock_read(RTC_MINUTES); + hour = chrp_cmos_clock_read(RTC_HOURS); + day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH); + mon = chrp_cmos_clock_read(RTC_MONTH); + year = chrp_cmos_clock_read(RTC_YEAR); + uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT); + if ((uip & RTC_UIP)==0) break; + } + + if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + if (year < 70) + year += 100; + tm->tm_sec = sec; + tm->tm_min = min; + tm->tm_hour = hour; + tm->tm_mday = day; + tm->tm_mon = mon; + tm->tm_year = year; +} + + +void __init chrp_calibrate_decr(void) +{ + struct device_node *cpu; + unsigned int freq, *fp; + + /* + * The cpu node should have a timebase-frequency property + * to tell us the rate at which the decrementer counts. + */ + freq = 16666000; /* hardcoded default */ + cpu = find_type_devices("cpu"); + if (cpu != 0) { + fp = (unsigned int *) + get_property(cpu, "timebase-frequency", NULL); + if (fp != 0) + freq = *fp; + } + ppc_tb_freq = freq; +} |