diff options
Diffstat (limited to 'arch/powerpc/platforms/maple')
| -rw-r--r-- | arch/powerpc/platforms/maple/pci.c | 17 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/setup.c | 94 |
2 files changed, 74 insertions, 37 deletions
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index f7170ff86da..63a1670d3bf 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -443,18 +443,23 @@ void __init maple_pci_init(void) int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) { struct device_node *np; - int irq = channel ? 15 : 14; + unsigned int defirq = channel ? 15 : 14; + unsigned int irq; if (pdev->vendor != PCI_VENDOR_ID_AMD || pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) - return irq; + return defirq; np = pci_device_to_OF_node(pdev); if (np == NULL) - return irq; - if (np->n_intrs < 2) - return irq; - return np->intrs[channel & 0x1].line; + return defirq; + irq = irq_of_parse_and_map(np, channel & 0x1); + if (irq == NO_IRQ) { + printk("Failed to map onboard IDE interrupt for channel %d\n", + channel); + return defirq; + } + return irq; } /* XXX: To remove once all firmwares are ok */ diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 5cf90c28b14..cb528c9de4c 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -11,7 +11,7 @@ * */ -#define DEBUG +#undef DEBUG #include <linux/init.h> #include <linux/errno.h> @@ -198,50 +198,81 @@ static void __init maple_init_early(void) { DBG(" -> maple_init_early\n"); - /* Setup interrupt mapping options */ - ppc64_interrupt_controller = IC_OPEN_PIC; - iommu_init_early_dart(); DBG(" <- maple_init_early\n"); } - -static __init void maple_init_IRQ(void) +/* + * This is almost identical to pSeries and CHRP. We need to make that + * code generic at one point, with appropriate bits in the device-tree to + * identify the presence of an HT APIC + */ +static void __init maple_init_IRQ(void) { - struct device_node *root; + struct device_node *root, *np, *mpic_node = NULL; unsigned int *opprop; - unsigned long opic_addr; + unsigned long openpic_addr = 0; + int naddr, n, i, opplen, has_isus = 0; struct mpic *mpic; - unsigned char senses[128]; - int n; + unsigned int flags = MPIC_PRIMARY; - DBG(" -> maple_init_IRQ\n"); + /* Locate MPIC in the device-tree. Note that there is a bug + * in Maple device-tree where the type of the controller is + * open-pic and not interrupt-controller + */ + for_each_node_by_type(np, "open-pic") { + mpic_node = np; + break; + } + if (mpic_node == NULL) { + printk(KERN_ERR + "Failed to locate the MPIC interrupt controller\n"); + return; + } - /* XXX: Non standard, replace that with a proper openpic/mpic node - * in the device-tree. Find the Open PIC if present */ + /* Find address list in /platform-open-pic */ root = of_find_node_by_path("/"); - opprop = (unsigned int *) get_property(root, - "platform-open-pic", NULL); - if (opprop == 0) - panic("OpenPIC not found !\n"); - - n = prom_n_addr_cells(root); - for (opic_addr = 0; n > 0; --n) - opic_addr = (opic_addr << 32) + *opprop++; + naddr = prom_n_addr_cells(root); + opprop = (unsigned int *) get_property(root, "platform-open-pic", + &opplen); + if (opprop != 0) { + openpic_addr = of_read_number(opprop, naddr); + has_isus = (opplen > naddr); + printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n", + openpic_addr, has_isus); + } of_node_put(root); - /* Obtain sense values from device-tree */ - prom_get_irq_senses(senses, 0, 128); + BUG_ON(openpic_addr == 0); + + /* Check for a big endian MPIC */ + if (get_property(np, "big-endian", NULL) != NULL) + flags |= MPIC_BIG_ENDIAN; - mpic = mpic_alloc(opic_addr, - MPIC_PRIMARY | MPIC_BIG_ENDIAN | - MPIC_BROKEN_U3 | MPIC_WANTS_RESET, - 0, 0, 128, 128, senses, 128, "U3-MPIC"); + /* XXX Maple specific bits */ + flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET; + + /* Setup the openpic driver. More device-tree junks, we hard code no + * ISUs for now. I'll have to revisit some stuffs with the folks doing + * the firmware for those + */ + mpic = mpic_alloc(mpic_node, openpic_addr, flags, + /*has_isus ? 16 :*/ 0, 0, " MPIC "); BUG_ON(mpic == NULL); - mpic_init(mpic); - DBG(" <- maple_init_IRQ\n"); + /* Add ISUs */ + opplen /= sizeof(u32); + for (n = 0, i = naddr; i < opplen; i += naddr, n++) { + unsigned long isuaddr = of_read_number(opprop + i, naddr); + mpic_assign_isu(mpic, n, isuaddr); + } + + /* All ISUs are setup, complete initialization */ + mpic_init(mpic); + ppc_md.get_irq = mpic_get_irq; + of_node_put(mpic_node); + of_node_put(root); } static void __init maple_progress(char *s, unsigned short hex) @@ -256,7 +287,9 @@ static void __init maple_progress(char *s, unsigned short hex) static int __init maple_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (!of_flat_dt_is_compatible(root, "Momentum,Maple")) + + if (!of_flat_dt_is_compatible(root, "Momentum,Maple") && + !of_flat_dt_is_compatible(root, "Momentum,Apache")) return 0; /* * On U3, the DART (iommu) must be allocated now since it @@ -277,7 +310,6 @@ define_machine(maple_md) { .setup_arch = maple_setup_arch, .init_early = maple_init_early, .init_IRQ = maple_init_IRQ, - .get_irq = mpic_get_irq, .pcibios_fixup = maple_pcibios_fixup, .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq, .restart = maple_restart, |