summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/powermac/pic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/powermac/pic.c')
-rw-r--r--arch/powerpc/platforms/powermac/pic.c681
1 files changed, 681 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
new file mode 100644
index 00000000000..90040c49494
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -0,0 +1,681 @@
+/*
+ * Support for the interrupt controllers found on Power Macintosh,
+ * currently Apple's "Grand Central" interrupt controller in all
+ * it's incarnations. OpenPIC support used on newer machines is
+ * in a separate file
+ *
+ * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
+ *
+ * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/module.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/pmac_feature.h>
+#include <asm/mpic.h>
+
+#include "pmac.h"
+
+/*
+ * XXX this should be in xmon.h, but putting it there means xmon.h
+ * has to include <linux/interrupt.h> (to get irqreturn_t), which
+ * causes all sorts of problems. -- paulus
+ */
+extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+
+#ifdef CONFIG_PPC32
+struct pmac_irq_hw {
+ unsigned int event;
+ unsigned int enable;
+ unsigned int ack;
+ unsigned int level;
+};
+
+/* Default addresses */
+static volatile struct pmac_irq_hw *pmac_irq_hw[4] = {
+ (struct pmac_irq_hw *) 0xf3000020,
+ (struct pmac_irq_hw *) 0xf3000010,
+ (struct pmac_irq_hw *) 0xf4000020,
+ (struct pmac_irq_hw *) 0xf4000010,
+};
+
+#define GC_LEVEL_MASK 0x3ff00000
+#define OHARE_LEVEL_MASK 0x1ff00000
+#define HEATHROW_LEVEL_MASK 0x1ff00000
+
+static int max_irqs;
+static int max_real_irqs;
+static u32 level_mask[4];
+
+static DEFINE_SPINLOCK(pmac_pic_lock);
+
+#define GATWICK_IRQ_POOL_SIZE 10
+static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
+
+#define NR_MASK_WORDS ((NR_IRQS + 31) / 32)
+static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+
+/*
+ * Mark an irq as "lost". This is only used on the pmac
+ * since it can lose interrupts (see pmac_set_irq_mask).
+ * -- Cort
+ */
+void
+__set_lost(unsigned long irq_nr, int nokick)
+{
+ if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
+ atomic_inc(&ppc_n_lost_interrupts);
+ if (!nokick)
+ set_dec(1);
+ }
+}
+
+static void
+pmac_mask_and_ack_irq(unsigned int irq_nr)
+{
+ unsigned long bit = 1UL << (irq_nr & 0x1f);
+ int i = irq_nr >> 5;
+ unsigned long flags;
+
+ if ((unsigned)irq_nr >= max_irqs)
+ return;
+
+ clear_bit(irq_nr, ppc_cached_irq_mask);
+ if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
+ atomic_dec(&ppc_n_lost_interrupts);
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+ out_le32(&pmac_irq_hw[i]->ack, bit);
+ do {
+ /* make sure ack gets to controller before we enable
+ interrupts */
+ mb();
+ } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+ != (ppc_cached_irq_mask[i] & bit));
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
+{
+ unsigned long bit = 1UL << (irq_nr & 0x1f);
+ int i = irq_nr >> 5;
+ unsigned long flags;
+
+ if ((unsigned)irq_nr >= max_irqs)
+ return;
+
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ /* enable unmasked interrupts */
+ out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+
+ do {
+ /* make sure mask gets to controller before we
+ return to user */
+ mb();
+ } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+ != (ppc_cached_irq_mask[i] & bit));
+
+ /*
+ * Unfortunately, setting the bit in the enable register
+ * when the device interrupt is already on *doesn't* set
+ * the bit in the flag register or request another interrupt.
+ */
+ if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
+ __set_lost((ulong)irq_nr, nokicklost);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+/* When an irq gets requested for the first client, if it's an
+ * edge interrupt, we clear any previous one on the controller
+ */
+static unsigned int pmac_startup_irq(unsigned int irq_nr)
+{
+ unsigned long bit = 1UL << (irq_nr & 0x1f);
+ int i = irq_nr >> 5;
+
+ if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+ out_le32(&pmac_irq_hw[i]->ack, bit);
+ set_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 0);
+
+ return 0;
+}
+
+static void pmac_mask_irq(unsigned int irq_nr)
+{
+ clear_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 0);
+ mb();
+}
+
+static void pmac_unmask_irq(unsigned int irq_nr)
+{
+ set_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 0);
+}
+
+static void pmac_end_irq(unsigned int irq_nr)
+{
+ if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+ && irq_desc[irq_nr].action) {
+ set_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 1);
+ }
+}
+
+
+struct hw_interrupt_type pmac_pic = {
+ .typename = " PMAC-PIC ",
+ .startup = pmac_startup_irq,
+ .enable = pmac_unmask_irq,
+ .disable = pmac_mask_irq,
+ .ack = pmac_mask_and_ack_irq,
+ .end = pmac_end_irq,
+};
+
+struct hw_interrupt_type gatwick_pic = {
+ .typename = " GATWICK ",
+ .startup = pmac_startup_irq,
+ .enable = pmac_unmask_irq,
+ .disable = pmac_mask_irq,
+ .ack = pmac_mask_and_ack_irq,
+ .end = pmac_end_irq,
+};
+
+static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ int irq, bits;
+
+ for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
+ int i = irq >> 5;
+ bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+ /* We must read level interrupts from the level register */
+ bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits &= ppc_cached_irq_mask[i];
+ if (bits == 0)
+ continue;
+ irq += __ilog2(bits);
+ __do_IRQ(irq, regs);
+ return IRQ_HANDLED;
+ }
+ printk("gatwick irq not from gatwick pic\n");
+ return IRQ_NONE;
+}
+
+int
+pmac_get_irq(struct pt_regs *regs)
+{
+ int irq;
+ unsigned long bits = 0;
+
+#ifdef CONFIG_SMP
+ void psurge_smp_message_recv(struct pt_regs *);
+
+ /* IPI's are a hack on the powersurge -- Cort */
+ if ( smp_processor_id() != 0 ) {
+ psurge_smp_message_recv(regs);
+ return -2; /* ignore, already handled */
+ }
+#endif /* CONFIG_SMP */
+ for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
+ int i = irq >> 5;
+ bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+ /* We must read level interrupts from the level register */
+ bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits &= ppc_cached_irq_mask[i];
+ if (bits == 0)
+ continue;
+ irq += __ilog2(bits);
+ break;
+ }
+
+ return irq;
+}
+
+/* This routine will fix some missing interrupt values in the device tree
+ * on the gatwick mac-io controller used by some PowerBooks
+ */
+static void __init
+pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
+{
+ struct device_node *node;
+ int count;
+
+ memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
+ node = gw->child;
+ count = 0;
+ while(node)
+ {
+ /* Fix SCC */
+ if (strcasecmp(node->name, "escc") == 0)
+ if (node->child) {
+ if (node->child->n_intrs < 3) {
+ node->child->intrs = &gatwick_int_pool[count];
+ count += 3;
+ }
+ node->child->n_intrs = 3;
+ node->child->intrs[0].line = 15+irq_base;
+ node->child->intrs[1].line = 4+irq_base;
+ node->child->intrs[2].line = 5+irq_base;
+ printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n",
+ node->child->intrs[0].line,
+ node->child->intrs[1].line,
+ node->child->intrs[2].line);
+ }
+ /* Fix media-bay & left SWIM */
+ if (strcasecmp(node->name, "media-bay") == 0) {
+ struct device_node* ya_node;
+
+ if (node->n_intrs == 0)
+ node->intrs = &gatwick_int_pool[count++];
+ node->n_intrs = 1;
+ node->intrs[0].line = 29+irq_base;
+ printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n",
+ node->intrs[0].line);
+
+ ya_node = node->child;
+ while(ya_node)
+ {
+ if (strcasecmp(ya_node->name, "floppy") == 0) {
+ if (ya_node->n_intrs < 2) {
+ ya_node->intrs = &gatwick_int_pool[count];
+ count += 2;
+ }
+ ya_node->n_intrs = 2;
+ ya_node->intrs[0].line = 19+irq_base;
+ ya_node->intrs[1].line = 1+irq_base;
+ printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
+ ya_node->intrs[0].line, ya_node->intrs[1].line);
+ }
+ if (strcasecmp(ya_node->name, "ata4") == 0) {
+ if (ya_node->n_intrs < 2) {
+ ya_node->intrs = &gatwick_int_pool[count];
+ count += 2;
+ }
+ ya_node->n_intrs = 2;
+ ya_node->intrs[0].line = 14+irq_base;
+ ya_node->intrs[1].line = 3+irq_base;
+ printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
+ ya_node->intrs[0].line, ya_node->intrs[1].line);
+ }
+ ya_node = ya_node->sibling;
+ }
+ }
+ node = node->sibling;
+ }
+ if (count > 10) {
+ printk("WARNING !! Gatwick interrupt pool overflow\n");
+ printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
+ printk(" requested = %d\n", count);
+ }
+}
+
+/*
+ * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
+ * card which includes an ohare chip that acts as a second interrupt
+ * controller. If we find this second ohare, set it up and fix the
+ * interrupt value in the device tree for the ethernet chip.
+ */
+static int __init enable_second_ohare(void)
+{
+ unsigned char bus, devfn;
+ unsigned short cmd;
+ unsigned long addr;
+ struct device_node *irqctrler = find_devices("pci106b,7");
+ struct device_node *ether;
+
+ if (irqctrler == NULL || irqctrler->n_addrs <= 0)
+ return -1;
+ addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40);
+ pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20);
+ max_irqs = 64;
+ if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) {
+ struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler);
+ if (!hose)
+ printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+ else {
+ early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ cmd &= ~PCI_COMMAND_IO;
+ early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+ }
+ }
+
+ /* Fix interrupt for the modem/ethernet combo controller. The number
+ in the device tree (27) is bogus (correct for the ethernet-only
+ board but not the combo ethernet/modem board).
+ The real interrupt is 28 on the second controller -> 28+32 = 60.
+ */
+ ether = find_devices("pci1011,14");
+ if (ether && ether->n_intrs > 0) {
+ ether->intrs[0].line = 60;
+ printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
+ ether->intrs[0].line);
+ }
+
+ /* Return the interrupt number of the cascade */
+ return irqctrler->intrs[0].line;
+}
+
+#ifdef CONFIG_XMON
+static struct irqaction xmon_action = {
+ .handler = xmon_irq,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = "NMI - XMON"
+};
+#endif
+
+static struct irqaction gatwick_cascade_action = {
+ .handler = gatwick_action,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cascade",
+};
+#endif /* CONFIG_PPC32 */
+
+static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+{
+ return mpic_get_one_irq((struct mpic *)data, regs);
+}
+
+void __init pmac_pic_init(void)
+{
+ struct device_node *irqctrler = NULL;
+ struct device_node *irqctrler2 = NULL;
+ struct device_node *np;
+#ifdef CONFIG_PPC32
+ int i;
+ unsigned long addr;
+ int irq_cascade = -1;
+#endif
+ struct mpic *mpic1, *mpic2;
+
+ /* We first try to detect Apple's new Core99 chipset, since mac-io
+ * is quite different on those machines and contains an IBM MPIC2.
+ */
+ np = find_type_devices("open-pic");
+ while (np) {
+ if (np->parent && !strcmp(np->parent->name, "u3"))
+ irqctrler2 = np;
+ else
+ irqctrler = np;
+ np = np->next;
+ }
+ if (irqctrler != NULL && irqctrler->n_addrs > 0) {
+ unsigned char senses[128];
+
+ printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
+ (unsigned int)irqctrler->addrs[0].address);
+ pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0);
+
+ prom_get_irq_senses(senses, 0, 128);
+ mpic1 = mpic_alloc(irqctrler->addrs[0].address,
+ MPIC_PRIMARY | MPIC_WANTS_RESET,
+ 0, 0, 128, 252, senses, 128, " OpenPIC ");
+ BUG_ON(mpic1 == NULL);
+ mpic_init(mpic1);
+
+ if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
+ irqctrler2->n_addrs > 0) {
+ printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
+ (u32)irqctrler2->addrs[0].address,
+ irqctrler2->intrs[0].line);
+
+ pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
+ prom_get_irq_senses(senses, 128, 128 + 124);
+
+ /* We don't need to set MPIC_BROKEN_U3 here since we don't have
+ * hypertransport interrupts routed to it
+ */
+ mpic2 = mpic_alloc(irqctrler2->addrs[0].address,
+ MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
+ 0, 128, 124, 0, senses, 124,
+ " U3-MPIC ");
+ BUG_ON(mpic2 == NULL);
+ mpic_init(mpic2);
+ mpic_setup_cascade(irqctrler2->intrs[0].line,
+ pmac_u3_cascade, mpic2);
+ }
+#if defined(CONFIG_XMON) && defined(CONFIG_PPC32)
+ {
+ struct device_node* pswitch;
+ int nmi_irq;
+
+ pswitch = find_devices("programmer-switch");
+ if (pswitch && pswitch->n_intrs) {
+ nmi_irq = pswitch->intrs[0].line;
+ mpic_irq_set_priority(nmi_irq, 9);
+ setup_irq(nmi_irq, &xmon_action);
+ }
+ }
+#endif /* CONFIG_XMON */
+ return;
+ }
+ irqctrler = NULL;
+
+#ifdef CONFIG_PPC32
+ /* Get the level/edge settings, assume if it's not
+ * a Grand Central nor an OHare, then it's an Heathrow
+ * (or Paddington).
+ */
+ ppc_md.get_irq = pmac_get_irq;
+ if (find_devices("gc"))
+ level_mask[0] = GC_LEVEL_MASK;
+ else if (find_devices("ohare")) {
+ level_mask[0] = OHARE_LEVEL_MASK;
+ /* We might have a second cascaded ohare */
+ level_mask[1] = OHARE_LEVEL_MASK;
+ } else {
+ level_mask[0] = HEATHROW_LEVEL_MASK;
+ level_mask[1] = 0;
+ /* We might have a second cascaded heathrow */
+ level_mask[2] = HEATHROW_LEVEL_MASK;
+ level_mask[3] = 0;
+ }
+
+ /*
+ * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts,
+ * 1998 G3 Series PowerBooks have 128,
+ * other powermacs have 32.
+ * The combo ethernet/modem card for the Powerstar powerbooks
+ * (2400/3400/3500, ohare based) has a second ohare chip
+ * effectively making a total of 64.
+ */
+ max_irqs = max_real_irqs = 32;
+ irqctrler = find_devices("mac-io");
+ if (irqctrler)
+ {
+ max_real_irqs = 64;
+ if (irqctrler->next)
+ max_irqs = 128;
+ else
+ max_irqs = 64;
+ }
+ for ( i = 0; i < max_real_irqs ; i++ )
+ irq_desc[i].handler = &pmac_pic;
+
+ /* get addresses of first controller */
+ if (irqctrler) {
+ if (irqctrler->n_addrs > 0) {
+ addr = (unsigned long)
+ ioremap(irqctrler->addrs[0].address, 0x40);
+ for (i = 0; i < 2; ++i)
+ pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
+ (addr + (2 - i) * 0x10);
+ }
+
+ /* get addresses of second controller */
+ irqctrler = irqctrler->next;
+ if (irqctrler && irqctrler->n_addrs > 0) {
+ addr = (unsigned long)
+ ioremap(irqctrler->addrs[0].address, 0x40);
+ for (i = 2; i < 4; ++i)
+ pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
+ (addr + (4 - i) * 0x10);
+ irq_cascade = irqctrler->intrs[0].line;
+ if (device_is_compatible(irqctrler, "gatwick"))
+ pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs);
+ }
+ } else {
+ /* older powermacs have a GC (grand central) or ohare at
+ f3000000, with interrupt control registers at f3000020. */
+ addr = (unsigned long) ioremap(0xf3000000, 0x40);
+ pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20);
+ }
+
+ /* PowerBooks 3400 and 3500 can have a second controller in a second
+ ohare chip, on the combo ethernet/modem card */
+ if (machine_is_compatible("AAPL,3400/2400")
+ || machine_is_compatible("AAPL,3500"))
+ irq_cascade = enable_second_ohare();
+
+ /* disable all interrupts in all controllers */
+ for (i = 0; i * 32 < max_irqs; ++i)
+ out_le32(&pmac_irq_hw[i]->enable, 0);
+ /* mark level interrupts */
+ for (i = 0; i < max_irqs; i++)
+ if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
+ irq_desc[i].status = IRQ_LEVEL;
+
+ /* get interrupt line of secondary interrupt controller */
+ if (irq_cascade >= 0) {
+ printk(KERN_INFO "irq: secondary controller on irq %d\n",
+ (int)irq_cascade);
+ for ( i = max_real_irqs ; i < max_irqs ; i++ )
+ irq_desc[i].handler = &gatwick_pic;
+ setup_irq(irq_cascade, &gatwick_cascade_action);
+ }
+ printk("System has %d possible interrupts\n", max_irqs);
+ if (max_irqs != max_real_irqs)
+ printk(KERN_DEBUG "%d interrupts on main controller\n",
+ max_real_irqs);
+
+#ifdef CONFIG_XMON
+ setup_irq(20, &xmon_action);
+#endif /* CONFIG_XMON */
+#endif /* CONFIG_PPC32 */
+}
+
+#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
+/*
+ * These procedures are used in implementing sleep on the powerbooks.
+ * sleep_save_intrs() saves the states of all interrupt enables
+ * and disables all interrupts except for the nominated one.
+ * sleep_restore_intrs() restores the states of all interrupt enables.
+ */
+unsigned long sleep_save_mask[2];
+
+/* This used to be passed by the PMU driver but that link got
+ * broken with the new driver model. We use this tweak for now...
+ */
+static int pmacpic_find_viaint(void)
+{
+ int viaint = -1;
+
+#ifdef CONFIG_ADB_PMU
+ struct device_node *np;
+
+ if (pmu_get_model() != PMU_OHARE_BASED)
+ goto not_found;
+ np = of_find_node_by_name(NULL, "via-pmu");
+ if (np == NULL)
+ goto not_found;
+ viaint = np->intrs[0].line;
+#endif /* CONFIG_ADB_PMU */
+
+not_found:
+ return viaint;
+}
+
+static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+ int viaint = pmacpic_find_viaint();
+
+ sleep_save_mask[0] = ppc_cached_irq_mask[0];
+ sleep_save_mask[1] = ppc_cached_irq_mask[1];
+ ppc_cached_irq_mask[0] = 0;
+ ppc_cached_irq_mask[1] = 0;
+ if (viaint > 0)
+ set_bit(viaint, ppc_cached_irq_mask);
+ out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]);
+ if (max_real_irqs > 32)
+ out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]);
+ (void)in_le32(&pmac_irq_hw[0]->event);
+ /* make sure mask gets to controller before we return to caller */
+ mb();
+ (void)in_le32(&pmac_irq_hw[0]->enable);
+
+ return 0;
+}
+
+static int pmacpic_resume(struct sys_device *sysdev)
+{
+ int i;
+
+ out_le32(&pmac_irq_hw[0]->enable, 0);
+ if (max_real_irqs > 32)
+ out_le32(&pmac_irq_hw[1]->enable, 0);
+ mb();
+ for (i = 0; i < max_real_irqs; ++i)
+ if (test_bit(i, sleep_save_mask))
+ pmac_unmask_irq(i);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM && CONFIG_PPC32 */
+
+static struct sysdev_class pmacpic_sysclass = {
+ set_kset_name("pmac_pic"),
+};
+
+static struct sys_device device_pmacpic = {
+ .id = 0,
+ .cls = &pmacpic_sysclass,
+};
+
+static struct sysdev_driver driver_pmacpic = {
+#if defined(CONFIG_PM) && defined(CONFIG_PPC32)
+ .suspend = &pmacpic_suspend,
+ .resume = &pmacpic_resume,
+#endif /* CONFIG_PM && CONFIG_PPC32 */
+};
+
+static int __init init_pmacpic_sysfs(void)
+{
+#ifdef CONFIG_PPC32
+ if (max_irqs == 0)
+ return -ENODEV;
+#endif
+ printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
+ sysdev_class_register(&pmacpic_sysclass);
+ sysdev_register(&device_pmacpic);
+ sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
+ return 0;
+}
+
+subsys_initcall(init_pmacpic_sysfs);
+