diff options
Diffstat (limited to 'arch/powerpc/platforms/powermac/sleep.S')
| -rw-r--r-- | arch/powerpc/platforms/powermac/sleep.S | 396 |
1 files changed, 396 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powermac/sleep.S b/arch/powerpc/platforms/powermac/sleep.S new file mode 100644 index 00000000000..22b113d19b2 --- /dev/null +++ b/arch/powerpc/platforms/powermac/sleep.S @@ -0,0 +1,396 @@ +/* + * This file contains sleep low-level functions for PowerBook G3. + * Copyright (C) 1999 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * and Paul Mackerras (paulus@samba.org). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/cputable.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> + +#define MAGIC 0x4c617273 /* 'Lars' */ + +/* + * Structure for storing CPU registers on the stack. + */ +#define SL_SP 0 +#define SL_PC 4 +#define SL_MSR 8 +#define SL_SDR1 0xc +#define SL_SPRG0 0x10 /* 4 sprg's */ +#define SL_DBAT0 0x20 +#define SL_IBAT0 0x28 +#define SL_DBAT1 0x30 +#define SL_IBAT1 0x38 +#define SL_DBAT2 0x40 +#define SL_IBAT2 0x48 +#define SL_DBAT3 0x50 +#define SL_IBAT3 0x58 +#define SL_TB 0x60 +#define SL_R2 0x68 +#define SL_CR 0x6c +#define SL_R12 0x70 /* r12 to r31 */ +#define SL_SIZE (SL_R12 + 80) + + .section .text + .align 5 + +#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC) + +/* This gets called by via-pmu.c late during the sleep process. + * The PMU was already send the sleep command and will shut us down + * soon. We need to save all that is needed and setup the wakeup + * vector that will be called by the ROM on wakeup + */ +_GLOBAL(low_sleep_handler) +#ifndef CONFIG_6xx + blr +#else + mflr r0 + stw r0,4(r1) + stwu r1,-SL_SIZE(r1) + mfcr r0 + stw r0,SL_CR(r1) + stw r2,SL_R2(r1) + stmw r12,SL_R12(r1) + + /* Save MSR & SDR1 */ + mfmsr r4 + stw r4,SL_MSR(r1) + mfsdr1 r4 + stw r4,SL_SDR1(r1) + + /* Get a stable timebase and save it */ +1: mftbu r4 + stw r4,SL_TB(r1) + mftb r5 + stw r5,SL_TB+4(r1) + mftbu r3 + cmpw r3,r4 + bne 1b + + /* Save SPRGs */ + mfsprg r4,0 + stw r4,SL_SPRG0(r1) + mfsprg r4,1 + stw r4,SL_SPRG0+4(r1) + mfsprg r4,2 + stw r4,SL_SPRG0+8(r1) + mfsprg r4,3 + stw r4,SL_SPRG0+12(r1) + + /* Save BATs */ + mfdbatu r4,0 + stw r4,SL_DBAT0(r1) + mfdbatl r4,0 + stw r4,SL_DBAT0+4(r1) + mfdbatu r4,1 + stw r4,SL_DBAT1(r1) + mfdbatl r4,1 + stw r4,SL_DBAT1+4(r1) + mfdbatu r4,2 + stw r4,SL_DBAT2(r1) + mfdbatl r4,2 + stw r4,SL_DBAT2+4(r1) + mfdbatu r4,3 + stw r4,SL_DBAT3(r1) + mfdbatl r4,3 + stw r4,SL_DBAT3+4(r1) + mfibatu r4,0 + stw r4,SL_IBAT0(r1) + mfibatl r4,0 + stw r4,SL_IBAT0+4(r1) + mfibatu r4,1 + stw r4,SL_IBAT1(r1) + mfibatl r4,1 + stw r4,SL_IBAT1+4(r1) + mfibatu r4,2 + stw r4,SL_IBAT2(r1) + mfibatl r4,2 + stw r4,SL_IBAT2+4(r1) + mfibatu r4,3 + stw r4,SL_IBAT3(r1) + mfibatl r4,3 + stw r4,SL_IBAT3+4(r1) + + /* Backup various CPU config stuffs */ + bl __save_cpu_setup + + /* The ROM can wake us up via 2 different vectors: + * - On wallstreet & lombard, we must write a magic + * value 'Lars' at address 4 and a pointer to a + * memory location containing the PC to resume from + * at address 0. + * - On Core99, we must store the wakeup vector at + * address 0x80 and eventually it's parameters + * at address 0x84. I've have some trouble with those + * parameters however and I no longer use them. + */ + lis r5,grackle_wake_up@ha + addi r5,r5,grackle_wake_up@l + tophys(r5,r5) + stw r5,SL_PC(r1) + lis r4,KERNELBASE@h + tophys(r5,r1) + addi r5,r5,SL_PC + lis r6,MAGIC@ha + addi r6,r6,MAGIC@l + stw r5,0(r4) + stw r6,4(r4) + /* Setup stuffs at 0x80-0x84 for Core99 */ + lis r3,core99_wake_up@ha + addi r3,r3,core99_wake_up@l + tophys(r3,r3) + stw r3,0x80(r4) + stw r5,0x84(r4) + /* Store a pointer to our backup storage into + * a kernel global + */ + lis r3,sleep_storage@ha + addi r3,r3,sleep_storage@l + stw r5,0(r3) + + .globl low_cpu_die +low_cpu_die: + /* Flush & disable all caches */ + bl flush_disable_caches + + /* Turn off data relocation. */ + mfmsr r3 /* Save MSR in r7 */ + rlwinm r3,r3,0,28,26 /* Turn off DR bit */ + sync + mtmsr r3 + isync + +BEGIN_FTR_SECTION + /* Flush any pending L2 data prefetches to work around HW bug */ + sync + lis r3,0xfff0 + lwz r0,0(r3) /* perform cache-inhibited load to ROM */ + sync /* (caches are disabled at this point) */ +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) + +/* + * Set the HID0 and MSR for sleep. + */ + mfspr r2,SPRN_HID0 + rlwinm r2,r2,0,10,7 /* clear doze, nap */ + oris r2,r2,HID0_SLEEP@h + sync + isync + mtspr SPRN_HID0,r2 + sync + +/* This loop puts us back to sleep in case we have a spurrious + * wakeup so that the host bridge properly stays asleep. The + * CPU will be turned off, either after a known time (about 1 + * second) on wallstreet & lombard, or as soon as the CPU enters + * SLEEP mode on core99 + */ + mfmsr r2 + oris r2,r2,MSR_POW@h +1: sync + mtmsr r2 + isync + b 1b + +/* + * Here is the resume code. + */ + + +/* + * Core99 machines resume here + * r4 has the physical address of SL_PC(sp) (unused) + */ +_GLOBAL(core99_wake_up) + /* Make sure HID0 no longer contains any sleep bit and that data cache + * is disabled + */ + mfspr r3,SPRN_HID0 + rlwinm r3,r3,0,11,7 /* clear SLEEP, NAP, DOZE bits */ + rlwinm 3,r3,0,18,15 /* clear DCE, ICE */ + mtspr SPRN_HID0,r3 + sync + isync + + /* sanitize MSR */ + mfmsr r3 + ori r3,r3,MSR_EE|MSR_IP + xori r3,r3,MSR_EE|MSR_IP + sync + isync + mtmsr r3 + sync + isync + + /* Recover sleep storage */ + lis r3,sleep_storage@ha + addi r3,r3,sleep_storage@l + tophys(r3,r3) + lwz r1,0(r3) + + /* Pass thru to older resume code ... */ +/* + * Here is the resume code for older machines. + * r1 has the physical address of SL_PC(sp). + */ + +grackle_wake_up: + + /* Restore the kernel's segment registers before + * we do any r1 memory access as we are not sure they + * are in a sane state above the first 256Mb region + */ + li r0,16 /* load up segment register values */ + mtctr r0 /* for context 0 */ + lis r3,0x2000 /* Ku = 1, VSID = 0 */ + li r4,0 +3: mtsrin r3,r4 + addi r3,r3,0x111 /* increment VSID */ + addis r4,r4,0x1000 /* address of next segment */ + bdnz 3b + sync + isync + + subi r1,r1,SL_PC + + /* Restore various CPU config stuffs */ + bl __restore_cpu_setup + + /* Make sure all FPRs have been initialized */ + bl reloc_offset + bl __init_fpu_registers + + /* Invalidate & enable L1 cache, we don't care about + * whatever the ROM may have tried to write to memory + */ + bl __inval_enable_L1 + + /* Restore the BATs, and SDR1. Then we can turn on the MMU. */ + lwz r4,SL_SDR1(r1) + mtsdr1 r4 + lwz r4,SL_SPRG0(r1) + mtsprg 0,r4 + lwz r4,SL_SPRG0+4(r1) + mtsprg 1,r4 + lwz r4,SL_SPRG0+8(r1) + mtsprg 2,r4 + lwz r4,SL_SPRG0+12(r1) + mtsprg 3,r4 + + lwz r4,SL_DBAT0(r1) + mtdbatu 0,r4 + lwz r4,SL_DBAT0+4(r1) + mtdbatl 0,r4 + lwz r4,SL_DBAT1(r1) + mtdbatu 1,r4 + lwz r4,SL_DBAT1+4(r1) + mtdbatl 1,r4 + lwz r4,SL_DBAT2(r1) + mtdbatu 2,r4 + lwz r4,SL_DBAT2+4(r1) + mtdbatl 2,r4 + lwz r4,SL_DBAT3(r1) + mtdbatu 3,r4 + lwz r4,SL_DBAT3+4(r1) + mtdbatl 3,r4 + lwz r4,SL_IBAT0(r1) + mtibatu 0,r4 + lwz r4,SL_IBAT0+4(r1) + mtibatl 0,r4 + lwz r4,SL_IBAT1(r1) + mtibatu 1,r4 + lwz r4,SL_IBAT1+4(r1) + mtibatl 1,r4 + lwz r4,SL_IBAT2(r1) + mtibatu 2,r4 + lwz r4,SL_IBAT2+4(r1) + mtibatl 2,r4 + lwz r4,SL_IBAT3(r1) + mtibatu 3,r4 + lwz r4,SL_IBAT3+4(r1) + mtibatl 3,r4 + +BEGIN_FTR_SECTION + li r4,0 + mtspr SPRN_DBAT4U,r4 + mtspr SPRN_DBAT4L,r4 + mtspr SPRN_DBAT5U,r4 + mtspr SPRN_DBAT5L,r4 + mtspr SPRN_DBAT6U,r4 + mtspr SPRN_DBAT6L,r4 + mtspr SPRN_DBAT7U,r4 + mtspr SPRN_DBAT7L,r4 + mtspr SPRN_IBAT4U,r4 + mtspr SPRN_IBAT4L,r4 + mtspr SPRN_IBAT5U,r4 + mtspr SPRN_IBAT5L,r4 + mtspr SPRN_IBAT6U,r4 + mtspr SPRN_IBAT6L,r4 + mtspr SPRN_IBAT7U,r4 + mtspr SPRN_IBAT7L,r4 +END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS) + + /* Flush all TLBs */ + lis r4,0x1000 +1: addic. r4,r4,-0x1000 + tlbie r4 + blt 1b + sync + + /* restore the MSR and turn on the MMU */ + lwz r3,SL_MSR(r1) + bl turn_on_mmu + + /* get back the stack pointer */ + tovirt(r1,r1) + + /* Restore TB */ + li r3,0 + mttbl r3 + lwz r3,SL_TB(r1) + lwz r4,SL_TB+4(r1) + mttbu r3 + mttbl r4 + + /* Restore the callee-saved registers and return */ + lwz r0,SL_CR(r1) + mtcr r0 + lwz r2,SL_R2(r1) + lmw r12,SL_R12(r1) + addi r1,r1,SL_SIZE + lwz r0,4(r1) + mtlr r0 + blr + +turn_on_mmu: + mflr r4 + tovirt(r4,r4) + mtsrr0 r4 + mtsrr1 r3 + sync + isync + rfi + +#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */ + + .section .data + .balign L1_CACHE_BYTES +sleep_storage: + .long 0 + .balign L1_CACHE_BYTES, 0 + +#endif /* CONFIG_6xx */ + .section .text |