summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/powernv/pci-ioda.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/powernv/pci-ioda.c')
-rw-r--r--arch/powerpc/platforms/powernv/pci-ioda.c307
1 files changed, 251 insertions, 56 deletions
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 8e90e8906df..8c6c9cf91c1 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -26,10 +26,12 @@
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
+#include <asm/msi_bitmap.h>
#include <asm/ppc-pci.h>
#include <asm/opal.h>
#include <asm/iommu.h>
#include <asm/tce.h>
+#include <asm/xics.h>
#include "powernv.h"
#include "pci.h"
@@ -87,6 +89,7 @@ static int pnv_ioda_alloc_pe(struct pnv_phb *phb)
return IODA_INVALID_PE;
} while(test_and_set_bit(pe, phb->ioda.pe_alloc));
+ phb->ioda.pe_array[pe].phb = phb;
phb->ioda.pe_array[pe].pe_number = pe;
return pe;
}
@@ -431,22 +434,102 @@ static void pnv_pci_ioda_setup_PEs(void)
}
}
-static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *dev)
+static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev)
{
- /* We delay DMA setup after we have assigned all PE# */
+ struct pci_dn *pdn = pnv_ioda_get_pdn(pdev);
+ struct pnv_ioda_pe *pe;
+
+ /*
+ * The function can be called while the PE#
+ * hasn't been assigned. Do nothing for the
+ * case.
+ */
+ if (!pdn || pdn->pe_number == IODA_INVALID_PE)
+ return;
+
+ pe = &phb->ioda.pe_array[pdn->pe_number];
+ set_iommu_table_base(&pdev->dev, &pe->tce32_table);
}
-static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
+static void pnv_pci_ioda1_tce_invalidate(struct iommu_table *tbl,
+ u64 *startp, u64 *endp)
{
- struct pci_dev *dev;
+ u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+ unsigned long start, end, inc;
+
+ start = __pa(startp);
+ end = __pa(endp);
+
+ /* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
+ if (tbl->it_busno) {
+ start <<= 12;
+ end <<= 12;
+ inc = 128 << 12;
+ start |= tbl->it_busno;
+ end |= tbl->it_busno;
+ } else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
+ /* p7ioc-style invalidation, 2 TCEs per write */
+ start |= (1ull << 63);
+ end |= (1ull << 63);
+ inc = 16;
+ } else {
+ /* Default (older HW) */
+ inc = 128;
+ }
- list_for_each_entry(dev, &bus->devices, bus_list) {
- set_iommu_table_base(&dev->dev, &pe->tce32_table);
- if (dev->subordinate)
- pnv_ioda_setup_bus_dma(pe, dev->subordinate);
+ end |= inc - 1; /* round up end to be different than start */
+
+ mb(); /* Ensure above stores are visible */
+ while (start <= end) {
+ __raw_writeq(start, invalidate);
+ start += inc;
+ }
+
+ /*
+ * The iommu layer will do another mb() for us on build()
+ * and we don't care on free()
+ */
+}
+
+static void pnv_pci_ioda2_tce_invalidate(struct pnv_ioda_pe *pe,
+ struct iommu_table *tbl,
+ u64 *startp, u64 *endp)
+{
+ unsigned long start, end, inc;
+ u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
+
+ /* We'll invalidate DMA address in PE scope */
+ start = 0x2ul << 60;
+ start |= (pe->pe_number & 0xFF);
+ end = start;
+
+ /* Figure out the start, end and step */
+ inc = tbl->it_offset + (((u64)startp - tbl->it_base) / sizeof(u64));
+ start |= (inc << 12);
+ inc = tbl->it_offset + (((u64)endp - tbl->it_base) / sizeof(u64));
+ end |= (inc << 12);
+ inc = (0x1ul << 12);
+ mb();
+
+ while (start <= end) {
+ __raw_writeq(start, invalidate);
+ start += inc;
}
}
+void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
+ u64 *startp, u64 *endp)
+{
+ struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
+ tce32_table);
+ struct pnv_phb *phb = pe->phb;
+
+ if (phb->type == PNV_PHB_IODA1)
+ pnv_pci_ioda1_tce_invalidate(tbl, startp, endp);
+ else
+ pnv_pci_ioda2_tce_invalidate(pe, tbl, startp, endp);
+}
+
static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
struct pnv_ioda_pe *pe, unsigned int base,
unsigned int segs)
@@ -518,16 +601,11 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
*/
tbl->it_busno = 0;
tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
- tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE
- | TCE_PCI_SWINV_PAIR;
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE |
+ TCE_PCI_SWINV_PAIR;
}
iommu_init_table(tbl, phb->hose->node);
- if (pe->pdev)
- set_iommu_table_base(&pe->pdev->dev, tbl);
- else
- pnv_ioda_setup_bus_dma(pe, pe->pbus);
-
return;
fail:
/* XXX Failure: Try to fallback to 64-bit only ? */
@@ -537,6 +615,76 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
__free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
}
+static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
+{
+ struct page *tce_mem = NULL;
+ void *addr;
+ const __be64 *swinvp;
+ struct iommu_table *tbl;
+ unsigned int tce_table_size, end;
+ int64_t rc;
+
+ /* We shouldn't already have a 32-bit DMA associated */
+ if (WARN_ON(pe->tce32_seg >= 0))
+ return;
+
+ /* The PE will reserve all possible 32-bits space */
+ pe->tce32_seg = 0;
+ end = (1 << ilog2(phb->ioda.m32_pci_base));
+ tce_table_size = (end / 0x1000) * 8;
+ pe_info(pe, "Setting up 32-bit TCE table at 0..%08x\n",
+ end);
+
+ /* Allocate TCE table */
+ tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
+ get_order(tce_table_size));
+ if (!tce_mem) {
+ pe_err(pe, "Failed to allocate a 32-bit TCE memory\n");
+ goto fail;
+ }
+ addr = page_address(tce_mem);
+ memset(addr, 0, tce_table_size);
+
+ /*
+ * Map TCE table through TVT. The TVE index is the PE number
+ * shifted by 1 bit for 32-bits DMA space.
+ */
+ rc = opal_pci_map_pe_dma_window(phb->opal_id, pe->pe_number,
+ pe->pe_number << 1, 1, __pa(addr),
+ tce_table_size, 0x1000);
+ if (rc) {
+ pe_err(pe, "Failed to configure 32-bit TCE table,"
+ " err %ld\n", rc);
+ goto fail;
+ }
+
+ /* Setup linux iommu table */
+ tbl = &pe->tce32_table;
+ pnv_pci_setup_iommu_table(tbl, addr, tce_table_size, 0);
+
+ /* OPAL variant of PHB3 invalidated TCEs */
+ swinvp = of_get_property(phb->hose->dn, "ibm,opal-tce-kill", NULL);
+ if (swinvp) {
+ /* We need a couple more fields -- an address and a data
+ * to or. Since the bus is only printed out on table free
+ * errors, and on the first pass the data will be a relative
+ * bus number, print that out instead.
+ */
+ tbl->it_busno = 0;
+ tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
+ tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
+ }
+ iommu_init_table(tbl, phb->hose->node);
+
+ return;
+fail:
+ if (pe->tce32_seg >= 0)
+ pe->tce32_seg = -1;
+ if (tce_mem)
+ __free_pages(tce_mem, get_order(tce_table_size));
+}
+
static void pnv_ioda_setup_dma(struct pnv_phb *phb)
{
struct pci_controller *hose = phb->hose;
@@ -579,20 +727,49 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb)
if (segs > remaining)
segs = remaining;
}
- pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
- pe->dma_weight, segs);
- pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+
+ /*
+ * For IODA2 compliant PHB3, we needn't care about the weight.
+ * The all available 32-bits DMA space will be assigned to
+ * the specific PE.
+ */
+ if (phb->type == PNV_PHB_IODA1) {
+ pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
+ pe->dma_weight, segs);
+ pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
+ } else {
+ pe_info(pe, "Assign DMA32 space\n");
+ segs = 0;
+ pnv_pci_ioda2_setup_dma_pe(phb, pe);
+ }
+
remaining -= segs;
base += segs;
}
}
#ifdef CONFIG_PCI_MSI
+static void pnv_ioda2_msi_eoi(struct irq_data *d)
+{
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+ struct irq_chip *chip = irq_data_get_irq_chip(d);
+ struct pnv_phb *phb = container_of(chip, struct pnv_phb,
+ ioda.irq_chip);
+ int64_t rc;
+
+ rc = opal_pci_msi_eoi(phb->opal_id, hw_irq);
+ WARN_ON_ONCE(rc);
+
+ icp_native_eoi(d);
+}
+
static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
- unsigned int hwirq, unsigned int is_64,
- struct msi_msg *msg)
+ unsigned int hwirq, unsigned int virq,
+ unsigned int is_64, struct msi_msg *msg)
{
struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
+ struct irq_data *idata;
+ struct irq_chip *ichip;
unsigned int xive_num = hwirq - phb->msi_base;
uint64_t addr64;
uint32_t addr32, data;
@@ -637,6 +814,23 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
}
msg->data = data;
+ /*
+ * Change the IRQ chip for the MSI interrupts on PHB3.
+ * The corresponding IRQ chip should be populated for
+ * the first time.
+ */
+ if (phb->type == PNV_PHB_IODA2) {
+ if (!phb->ioda.irq_chip_init) {
+ idata = irq_get_irq_data(virq);
+ ichip = irq_data_get_irq_chip(idata);
+ phb->ioda.irq_chip_init = 1;
+ phb->ioda.irq_chip = *ichip;
+ phb->ioda.irq_chip.irq_eoi = pnv_ioda2_msi_eoi;
+ }
+
+ irq_set_chip(virq, &phb->ioda.irq_chip);
+ }
+
pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d),"
" address=%x_%08x data=%x PE# %d\n",
pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num,
@@ -647,7 +841,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
{
- unsigned int bmap_size;
+ unsigned int count;
const __be32 *prop = of_get_property(phb->hose->dn,
"ibm,opal-msi-ranges", NULL);
if (!prop) {
@@ -658,18 +852,17 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
return;
phb->msi_base = be32_to_cpup(prop);
- phb->msi_count = be32_to_cpup(prop + 1);
- bmap_size = BITS_TO_LONGS(phb->msi_count) * sizeof(unsigned long);
- phb->msi_map = zalloc_maybe_bootmem(bmap_size, GFP_KERNEL);
- if (!phb->msi_map) {
+ count = be32_to_cpup(prop + 1);
+ if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) {
pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
phb->hose->global_number);
return;
}
+
phb->msi_setup = pnv_pci_ioda_msi_setup;
phb->msi32_support = 1;
pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
- phb->msi_count, phb->msi_base);
+ count, phb->msi_base);
}
#else
static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
@@ -852,18 +1045,19 @@ static u32 pnv_ioda_bdfn_to_pe(struct pnv_phb *phb, struct pci_bus *bus,
return phb->ioda.pe_rmap[(bus->number << 8) | devfn];
}
-void __init pnv_pci_init_ioda1_phb(struct device_node *np)
+void __init pnv_pci_init_ioda_phb(struct device_node *np, int ioda_type)
{
struct pci_controller *hose;
static int primary = 1;
struct pnv_phb *phb;
unsigned long size, m32map_off, iomap_off, pemap_off;
const u64 *prop64;
+ const u32 *prop32;
u64 phb_id;
void *aux;
long rc;
- pr_info(" Initializing IODA OPAL PHB %s\n", np->full_name);
+ pr_info(" Initializing IODA%d OPAL PHB %s\n", ioda_type, np->full_name);
prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
if (!prop64) {
@@ -890,37 +1084,34 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
hose->last_busno = 0xff;
hose->private_data = phb;
phb->opal_id = phb_id;
- phb->type = PNV_PHB_IODA1;
+ phb->type = ioda_type;
/* Detect specific models for error handling */
if (of_device_is_compatible(np, "ibm,p7ioc-pciex"))
phb->model = PNV_PHB_MODEL_P7IOC;
+ else if (of_device_is_compatible(np, "ibm,p8-pciex"))
+ phb->model = PNV_PHB_MODEL_PHB3;
else
phb->model = PNV_PHB_MODEL_UNKNOWN;
- /* We parse "ranges" now since we need to deduce the register base
- * from the IO base
- */
+ /* Parse 32-bit and IO ranges (if any) */
pci_process_bridge_OF_ranges(phb->hose, np, primary);
primary = 0;
- /* Magic formula from Milton */
+ /* Get registers */
phb->regs = of_iomap(np, 0);
if (phb->regs == NULL)
pr_err(" Failed to map registers !\n");
-
- /* XXX This is hack-a-thon. This needs to be changed so that:
- * - we obtain stuff like PE# etc... from device-tree
- * - we properly re-allocate M32 ourselves
- * (the OFW one isn't very good)
- */
-
/* Initialize more IODA stuff */
- phb->ioda.total_pe = 128;
+ prop32 = of_get_property(np, "ibm,opal-num-pes", NULL);
+ if (!prop32)
+ phb->ioda.total_pe = 1;
+ else
+ phb->ioda.total_pe = *prop32;
phb->ioda.m32_size = resource_size(&hose->mem_resources[0]);
- /* OFW Has already off top 64k of M32 space (MSI space) */
+ /* FW Has already off top 64k of M32 space (MSI space) */
phb->ioda.m32_size += 0x10000;
phb->ioda.m32_segsize = phb->ioda.m32_size / phb->ioda.total_pe;
@@ -930,7 +1121,10 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
phb->ioda.io_segsize = phb->ioda.io_size / phb->ioda.total_pe;
phb->ioda.io_pci_base = 0; /* XXX calculate this ? */
- /* Allocate aux data & arrays */
+ /* Allocate aux data & arrays
+ *
+ * XXX TODO: Don't allocate io segmap on PHB3
+ */
size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long));
m32map_off = size;
size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]);
@@ -960,7 +1154,7 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
hose->mem_resources[2].start = 0;
hose->mem_resources[2].end = 0;
-#if 0
+#if 0 /* We should really do that ... */
rc = opal_pci_set_phb_mem_window(opal->phb_id,
window_type,
window_num,
@@ -974,16 +1168,6 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
phb->ioda.m32_size, phb->ioda.m32_segsize,
phb->ioda.io_size, phb->ioda.io_segsize);
- if (phb->regs) {
- pr_devel(" BUID = 0x%016llx\n", in_be64(phb->regs + 0x100));
- pr_devel(" PHB2_CR = 0x%016llx\n", in_be64(phb->regs + 0x160));
- pr_devel(" IO_BAR = 0x%016llx\n", in_be64(phb->regs + 0x170));
- pr_devel(" IO_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x178));
- pr_devel(" IO_SAR = 0x%016llx\n", in_be64(phb->regs + 0x180));
- pr_devel(" M32_BAR = 0x%016llx\n", in_be64(phb->regs + 0x190));
- pr_devel(" M32_BAMR = 0x%016llx\n", in_be64(phb->regs + 0x198));
- pr_devel(" M32_SAR = 0x%016llx\n", in_be64(phb->regs + 0x1a0));
- }
phb->hose->ops = &pnv_pci_ops;
/* Setup RID -> PE mapping function */
@@ -1011,7 +1195,18 @@ void __init pnv_pci_init_ioda1_phb(struct device_node *np)
rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);
if (rc)
pr_warning(" OPAL Error %ld performing IODA table reset !\n", rc);
- opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+
+ /*
+ * On IODA1 map everything to PE#0, on IODA2 we assume the IODA reset
+ * has cleared the RTT which has the same effect
+ */
+ if (ioda_type == PNV_PHB_IODA1)
+ opal_pci_set_pe(phb_id, 0, 0, 7, 1, 1 , OPAL_MAP_PE);
+}
+
+void pnv_pci_init_ioda2_phb(struct device_node *np)
+{
+ pnv_pci_init_ioda_phb(np, PNV_PHB_IODA2);
}
void __init pnv_pci_init_ioda_hub(struct device_node *np)
@@ -1034,6 +1229,6 @@ void __init pnv_pci_init_ioda_hub(struct device_node *np)
for_each_child_of_node(np, phbn) {
/* Look for IODA1 PHBs */
if (of_device_is_compatible(phbn, "ibm,ioda-phb"))
- pnv_pci_init_ioda1_phb(phbn);
+ pnv_pci_init_ioda_phb(phbn, PNV_PHB_IODA1);
}
}