diff options
Diffstat (limited to 'arch/powerpc/platforms/pseries')
| -rw-r--r-- | arch/powerpc/platforms/pseries/Makefile | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/eeh.c | 516 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/eeh_cache.c | 316 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/eeh_driver.c | 376 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/eeh_event.c | 39 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/hvcserver.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/iommu.c | 14 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/lpar.c | 80 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/pci_dlpar.c | 174 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/ras.c | 11 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/ras.h | 9 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/reconfig.c | 100 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/scanlog.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/setup.c | 77 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/smp.c | 6 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/xics.c | 4 |
16 files changed, 1239 insertions, 495 deletions
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 06d5ef50121..61616d14407 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,10 +1,10 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o ras.o rtasd.o + setup.o iommu.o ras.o rtasd.o pci_dlpar.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_EEH) += eeh.o eeh_event.o +obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_HVCS) += hvcserver.o diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index c8d2a40dc5b..83578313ee7 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -76,15 +76,14 @@ */ #define EEH_MAX_FAILS 100000 -/* Misc forward declaraions */ -static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn); - /* RTAS tokens */ static int ibm_set_eeh_option; static int ibm_set_slot_reset; static int ibm_read_slot_reset_state; static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; +static int ibm_get_config_addr_info; +static int ibm_configure_bridge; int eeh_subsystem_enabled; EXPORT_SYMBOL(eeh_subsystem_enabled); @@ -98,308 +97,23 @@ static DEFINE_SPINLOCK(slot_errbuf_lock); static int eeh_error_buf_size; /* System monitoring statistics */ -static DEFINE_PER_CPU(unsigned long, no_device); -static DEFINE_PER_CPU(unsigned long, no_dn); -static DEFINE_PER_CPU(unsigned long, no_cfg_addr); -static DEFINE_PER_CPU(unsigned long, ignored_check); -static DEFINE_PER_CPU(unsigned long, total_mmio_ffs); -static DEFINE_PER_CPU(unsigned long, false_positives); -static DEFINE_PER_CPU(unsigned long, ignored_failures); -static DEFINE_PER_CPU(unsigned long, slot_resets); - -/** - * The pci address cache subsystem. This subsystem places - * PCI device address resources into a red-black tree, sorted - * according to the address range, so that given only an i/o - * address, the corresponding PCI device can be **quickly** - * found. It is safe to perform an address lookup in an interrupt - * context; this ability is an important feature. - * - * Currently, the only customer of this code is the EEH subsystem; - * thus, this code has been somewhat tailored to suit EEH better. - * In particular, the cache does *not* hold the addresses of devices - * for which EEH is not enabled. - * - * (Implementation Note: The RB tree seems to be better/faster - * than any hash algo I could think of for this problem, even - * with the penalty of slow pointer chases for d-cache misses). - */ -struct pci_io_addr_range -{ - struct rb_node rb_node; - unsigned long addr_lo; - unsigned long addr_hi; - struct pci_dev *pcidev; - unsigned int flags; -}; - -static struct pci_io_addr_cache -{ - struct rb_root rb_root; - spinlock_t piar_lock; -} pci_io_addr_cache_root; - -static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr) -{ - struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node; - - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - - if (addr < piar->addr_lo) { - n = n->rb_left; - } else { - if (addr > piar->addr_hi) { - n = n->rb_right; - } else { - pci_dev_get(piar->pcidev); - return piar->pcidev; - } - } - } - - return NULL; -} - -/** - * pci_get_device_by_addr - Get device, given only address - * @addr: mmio (PIO) phys address or i/o port number - * - * Given an mmio phys address, or a port number, find a pci device - * that implements this address. Be sure to pci_dev_put the device - * when finished. I/O port numbers are assumed to be offset - * from zero (that is, they do *not* have pci_io_addr added in). - * It is safe to call this function within an interrupt. - */ -static struct pci_dev *pci_get_device_by_addr(unsigned long addr) -{ - struct pci_dev *dev; - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - dev = __pci_get_device_by_addr(addr); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); - return dev; -} - -#ifdef DEBUG -/* - * Handy-dandy debug print routine, does nothing more - * than print out the contents of our addr cache. - */ -static void pci_addr_cache_print(struct pci_io_addr_cache *cache) -{ - struct rb_node *n; - int cnt = 0; - - n = rb_first(&cache->rb_root); - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n", - (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt, - piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev)); - cnt++; - n = rb_next(n); - } -} -#endif - -/* Insert address range into the rb tree. */ -static struct pci_io_addr_range * -pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, - unsigned long ahi, unsigned int flags) -{ - struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node; - struct rb_node *parent = NULL; - struct pci_io_addr_range *piar; - - /* Walk tree, find a place to insert into tree */ - while (*p) { - parent = *p; - piar = rb_entry(parent, struct pci_io_addr_range, rb_node); - if (ahi < piar->addr_lo) { - p = &parent->rb_left; - } else if (alo > piar->addr_hi) { - p = &parent->rb_right; - } else { - if (dev != piar->pcidev || - alo != piar->addr_lo || ahi != piar->addr_hi) { - printk(KERN_WARNING "PIAR: overlapping address range\n"); - } - return piar; - } - } - piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC); - if (!piar) - return NULL; - - piar->addr_lo = alo; - piar->addr_hi = ahi; - piar->pcidev = dev; - piar->flags = flags; - -#ifdef DEBUG - printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n", - alo, ahi, pci_name (dev)); -#endif +static unsigned long no_device; +static unsigned long no_dn; +static unsigned long no_cfg_addr; +static unsigned long ignored_check; +static unsigned long total_mmio_ffs; +static unsigned long false_positives; +static unsigned long ignored_failures; +static unsigned long slot_resets; - rb_link_node(&piar->rb_node, parent, p); - rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); - - return piar; -} - -static void __pci_addr_cache_insert_device(struct pci_dev *dev) -{ - struct device_node *dn; - struct pci_dn *pdn; - int i; - int inserted = 0; - - dn = pci_device_to_OF_node(dev); - if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev)); - return; - } - - /* Skip any devices for which EEH is not enabled. */ - pdn = PCI_DN(dn); - if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || - pdn->eeh_mode & EEH_MODE_NOCHECK) { -#ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n", - pci_name(dev), pdn->node->full_name); -#endif - return; - } - - /* The cache holds a reference to the device... */ - pci_dev_get(dev); - - /* Walk resources on this device, poke them into the tree */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - unsigned long start = pci_resource_start(dev,i); - unsigned long end = pci_resource_end(dev,i); - unsigned int flags = pci_resource_flags(dev,i); - - /* We are interested only bus addresses, not dma or other stuff */ - if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if (start == 0 || ~start == 0 || end == 0 || ~end == 0) - continue; - pci_addr_cache_insert(dev, start, end, flags); - inserted = 1; - } - - /* If there was nothing to add, the cache has no reference... */ - if (!inserted) - pci_dev_put(dev); -} - -/** - * pci_addr_cache_insert_device - Add a device to the address cache - * @dev: PCI device whose I/O addresses we are interested in. - * - * In order to support the fast lookup of devices based on addresses, - * we maintain a cache of devices that can be quickly searched. - * This routine adds a device to that cache. - */ -static void pci_addr_cache_insert_device(struct pci_dev *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - __pci_addr_cache_insert_device(dev); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); -} - -static inline void __pci_addr_cache_remove_device(struct pci_dev *dev) -{ - struct rb_node *n; - int removed = 0; - -restart: - n = rb_first(&pci_io_addr_cache_root.rb_root); - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - - if (piar->pcidev == dev) { - rb_erase(n, &pci_io_addr_cache_root.rb_root); - removed = 1; - kfree(piar); - goto restart; - } - n = rb_next(n); - } - - /* The cache no longer holds its reference to this device... */ - if (removed) - pci_dev_put(dev); -} - -/** - * pci_addr_cache_remove_device - remove pci device from addr cache - * @dev: device to remove - * - * Remove a device from the addr-cache tree. - * This is potentially expensive, since it will walk - * the tree multiple times (once per resource). - * But so what; device removal doesn't need to be that fast. - */ -static void pci_addr_cache_remove_device(struct pci_dev *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - __pci_addr_cache_remove_device(dev); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); -} - -/** - * pci_addr_cache_build - Build a cache of I/O addresses - * - * Build a cache of pci i/o addresses. This cache will be used to - * find the pci device that corresponds to a given address. - * This routine scans all pci busses to build the cache. - * Must be run late in boot process, after the pci controllers - * have been scaned for devices (after all device resources are known). - */ -void __init pci_addr_cache_build(void) -{ - struct device_node *dn; - struct pci_dev *dev = NULL; - - if (!eeh_subsystem_enabled) - return; - - spin_lock_init(&pci_io_addr_cache_root.piar_lock); - - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - /* Ignore PCI bridges ( XXX why ??) */ - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) { - continue; - } - pci_addr_cache_insert_device(dev); - - /* Save the BAR's; firmware doesn't restore these after EEH reset */ - dn = pci_device_to_OF_node(dev); - eeh_save_bars(dev, PCI_DN(dn)); - } - -#ifdef DEBUG - /* Verify tree built up above, echo back the list of addrs. */ - pci_addr_cache_print(&pci_io_addr_cache_root); -#endif -} +#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE) /* --------------------------------------------------------------- */ -/* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */ +/* Below lies the EEH event infrastructure */ void eeh_slot_error_detail (struct pci_dn *pdn, int severity) { + int config_addr; unsigned long flags; int rc; @@ -407,8 +121,13 @@ void eeh_slot_error_detail (struct pci_dn *pdn, int severity) spin_lock_irqsave(&slot_errbuf_lock, flags); memset(slot_errbuf, 0, eeh_error_buf_size); + /* Use PE configuration address, if present */ + config_addr = pdn->eeh_config_addr; + if (pdn->eeh_pe_config_addr) + config_addr = pdn->eeh_pe_config_addr; + rc = rtas_call(ibm_slot_error_detail, - 8, 1, NULL, pdn->eeh_config_addr, + 8, 1, NULL, config_addr, BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid), NULL, 0, virt_to_phys(slot_errbuf), @@ -428,6 +147,7 @@ void eeh_slot_error_detail (struct pci_dn *pdn, int severity) static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) { int token, outputs; + int config_addr; if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { token = ibm_read_slot_reset_state2; @@ -438,7 +158,12 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) outputs = 3; } - return rtas_call(token, 3, outputs, rets, pdn->eeh_config_addr, + /* Use PE configuration address, if present */ + config_addr = pdn->eeh_config_addr; + if (pdn->eeh_pe_config_addr) + config_addr = pdn->eeh_pe_config_addr; + + return rtas_call(token, 3, outputs, rets, config_addr, BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid)); } @@ -462,7 +187,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) /** * Return the "partitionable endpoint" (pe) under which this device lies */ -static struct device_node * find_device_pe(struct device_node *dn) +struct device_node * find_device_pe(struct device_node *dn) { while ((dn->parent) && PCI_DN(dn->parent) && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { @@ -483,8 +208,14 @@ static void __eeh_mark_slot (struct device_node *dn, int mode_flag) { while (dn) { if (PCI_DN(dn)) { + /* Mark the pci device driver too */ + struct pci_dev *dev = PCI_DN(dn)->pcidev; + PCI_DN(dn)->eeh_mode |= mode_flag; + if (dev && dev->driver) + dev->error_state = pci_channel_io_frozen; + if (dn->child) __eeh_mark_slot (dn->child, mode_flag); } @@ -495,6 +226,11 @@ static void __eeh_mark_slot (struct device_node *dn, int mode_flag) void eeh_mark_slot (struct device_node *dn, int mode_flag) { dn = find_device_pe (dn); + + /* Back up one, since config addrs might be shared */ + if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr) + dn = dn->parent; + PCI_DN(dn)->eeh_mode |= mode_flag; __eeh_mark_slot (dn->child, mode_flag); } @@ -516,7 +252,13 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag) { unsigned long flags; spin_lock_irqsave(&confirm_error_lock, flags); + dn = find_device_pe (dn); + + /* Back up one, since config addrs might be shared */ + if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr) + dn = dn->parent; + PCI_DN(dn)->eeh_mode &= ~mode_flag; PCI_DN(dn)->eeh_check_count = 0; __eeh_clear_slot (dn->child, mode_flag); @@ -544,15 +286,16 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) int rets[3]; unsigned long flags; struct pci_dn *pdn; + enum pci_channel_state state; int rc = 0; - __get_cpu_var(total_mmio_ffs)++; + total_mmio_ffs++; if (!eeh_subsystem_enabled) return 0; if (!dn) { - __get_cpu_var(no_dn)++; + no_dn++; return 0; } pdn = PCI_DN(dn); @@ -560,7 +303,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) /* Access to IO BARs might get this far and still not want checking. */ if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || pdn->eeh_mode & EEH_MODE_NOCHECK) { - __get_cpu_var(ignored_check)++; + ignored_check++; #ifdef DEBUG printk ("EEH:ignored check (%x) for %s %s\n", pdn->eeh_mode, pci_name (dev), dn->full_name); @@ -568,8 +311,8 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) return 0; } - if (!pdn->eeh_config_addr) { - __get_cpu_var(no_cfg_addr)++; + if (!pdn->eeh_config_addr && !pdn->eeh_pe_config_addr) { + no_cfg_addr++; return 0; } @@ -611,7 +354,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) if (ret != 0) { printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n", ret, dn->full_name); - __get_cpu_var(false_positives)++; + false_positives++; rc = 0; goto dn_unlock; } @@ -620,14 +363,14 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) if (rets[1] != 1) { printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n", ret, dn->full_name); - __get_cpu_var(false_positives)++; + false_positives++; rc = 0; goto dn_unlock; } /* If not the kind of error we know about, punt. */ if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) { - __get_cpu_var(false_positives)++; + false_positives++; rc = 0; goto dn_unlock; } @@ -635,12 +378,12 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) /* Note that config-io to empty slots may fail; * we recognize empty because they don't have children. */ if ((rets[0] == 5) && (dn->child == NULL)) { - __get_cpu_var(false_positives)++; + false_positives++; rc = 0; goto dn_unlock; } - __get_cpu_var(slot_resets)++; + slot_resets++; /* Avoid repeated reports of this failure, including problems * with other functions on this device, and functions under @@ -648,8 +391,13 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) eeh_mark_slot (dn, EEH_MODE_ISOLATED); spin_unlock_irqrestore(&confirm_error_lock, flags); - eeh_send_failure_event (dn, dev, rets[0], rets[2]); - + state = pci_channel_io_normal; + if ((rets[0] == 2) || (rets[0] == 4)) + state = pci_channel_io_frozen; + if (rets[0] == 5) + state = pci_channel_io_perm_failure; + eeh_send_failure_event (dn, dev, state, rets[2]); + /* Most EEH events are due to device driver bugs. Having * a stack trace will help the device-driver authors figure * out what happened. So print that out. */ @@ -685,7 +433,7 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon addr = eeh_token_to_phys((unsigned long __force) token); dev = pci_get_device_by_addr(addr); if (!dev) { - __get_cpu_var(no_device)++; + no_device++; return val; } @@ -716,11 +464,16 @@ eeh_slot_availability(struct pci_dn *pdn) if (rc) return rc; if (rets[1] == 0) return -1; /* EEH is not supported */ - if (rets[0] == 0) return 0; /* Oll Korrect */ + if (rets[0] == 0) return 0; /* Oll Korrect */ if (rets[0] == 5) { if (rets[2] == 0) return -1; /* permanently unavailable */ return rets[2]; /* number of millisecs to wait */ } + if (rets[0] == 1) + return 250; + + printk (KERN_ERR "EEH: Slot unavailable: rc=%d, rets=%d %d %d\n", + rc, rets[0], rets[1], rets[2]); return -1; } @@ -737,6 +490,7 @@ eeh_slot_availability(struct pci_dn *pdn) static void rtas_pci_slot_reset(struct pci_dn *pdn, int state) { + int config_addr; int rc; BUG_ON (pdn==NULL); @@ -747,8 +501,13 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state) return; } + /* Use PE configuration address, if present */ + config_addr = pdn->eeh_config_addr; + if (pdn->eeh_pe_config_addr) + config_addr = pdn->eeh_pe_config_addr; + rc = rtas_call(ibm_set_slot_reset,4,1, NULL, - pdn->eeh_config_addr, + config_addr, BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid), state); @@ -761,9 +520,11 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state) /** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second * dn -- device node to be reset. + * + * Return 0 if success, else a non-zero value. */ -void +int rtas_set_slot_reset(struct pci_dn *pdn) { int i, rc; @@ -793,10 +554,21 @@ rtas_set_slot_reset(struct pci_dn *pdn) * ready to be used; if not, wait for recovery. */ for (i=0; i<10; i++) { rc = eeh_slot_availability (pdn); - if (rc <= 0) break; + if (rc < 0) + printk (KERN_ERR "EEH: failed (%d) to reset slot %s\n", rc, pdn->node->full_name); + if (rc == 0) + return 0; + if (rc < 0) + return -1; msleep (rc+100); } + + rc = eeh_slot_availability (pdn); + if (rc) + printk (KERN_ERR "EEH: timeout resetting slot %s\n", pdn->node->full_name); + + return rc; } /* ------------------------------------------------------- */ @@ -851,7 +623,7 @@ void eeh_restore_bars(struct pci_dn *pdn) if (!pdn) return; - if (! pdn->eeh_is_bridge) + if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code)) __restore_bars (pdn); dn = pdn->node->child; @@ -869,30 +641,30 @@ void eeh_restore_bars(struct pci_dn *pdn) * PCI devices are added individuallly; but, for the restore, * an entire slot is reset at a time. */ -static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn) +static void eeh_save_bars(struct pci_dn *pdn) { int i; - if (!pdev || !pdn ) + if (!pdn ) return; for (i = 0; i < 16; i++) - pci_read_config_dword(pdev, i * 4, &pdn->config_space[i]); - - if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) - pdn->eeh_is_bridge = 1; + rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]); } void rtas_configure_bridge(struct pci_dn *pdn) { - int token = rtas_token ("ibm,configure-bridge"); + int config_addr; int rc; - if (token == RTAS_UNKNOWN_SERVICE) - return; - rc = rtas_call(token,3,1, NULL, - pdn->eeh_config_addr, + /* Use PE configuration address, if present */ + config_addr = pdn->eeh_config_addr; + if (pdn->eeh_pe_config_addr) + config_addr = pdn->eeh_pe_config_addr; + + rc = rtas_call(ibm_configure_bridge,3,1, NULL, + config_addr, BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid)); if (rc) { @@ -927,6 +699,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) int enable; struct pci_dn *pdn = PCI_DN(dn); + pdn->class_code = 0; pdn->eeh_mode = 0; pdn->eeh_check_count = 0; pdn->eeh_freeze_count = 0; @@ -943,6 +716,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) pdn->eeh_mode |= EEH_MODE_NOCHECK; return NULL; } + pdn->class_code = *class_code; /* * Now decide if we are going to "Disable" EEH checking @@ -953,8 +727,10 @@ static void *early_enable_eeh(struct device_node *dn, void *data) * But there are a few cases like display devices that make sense. */ enable = 1; /* i.e. we will do checking */ +#if 0 if ((*class_code >> 16) == PCI_BASE_CLASS_DISPLAY) enable = 0; +#endif if (!enable) pdn->eeh_mode |= EEH_MODE_NOCHECK; @@ -973,8 +749,22 @@ static void *early_enable_eeh(struct device_node *dn, void *data) eeh_subsystem_enabled = 1; pdn->eeh_mode |= EEH_MODE_SUPPORTED; pdn->eeh_config_addr = regs[0]; + + /* If the newer, better, ibm,get-config-addr-info is supported, + * then use that instead. */ + pdn->eeh_pe_config_addr = 0; + if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { + unsigned int rets[2]; + ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets, + pdn->eeh_config_addr, + info->buid_hi, info->buid_lo, + 0); + if (ret == 0) + pdn->eeh_pe_config_addr = rets[0]; + } #ifdef DEBUG - printk(KERN_DEBUG "EEH: %s: eeh enabled\n", dn->full_name); + printk(KERN_DEBUG "EEH: %s: eeh enabled, config=%x pe_config=%x\n", + dn->full_name, pdn->eeh_config_addr, pdn->eeh_pe_config_addr); #endif } else { @@ -993,6 +783,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) dn->full_name); } + eeh_save_bars(pdn); return NULL; } @@ -1026,6 +817,8 @@ void __init eeh_init(void) ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2"); ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); + ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); + ibm_configure_bridge = rtas_token ("ibm,configure-bridge"); if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) return; @@ -1080,12 +873,10 @@ void eeh_add_device_early(struct device_node *dn) if (!dn || !PCI_DN(dn)) return; phb = PCI_DN(dn)->phb; - if (NULL == phb || 0 == phb->buid) { - printk(KERN_WARNING "EEH: Expected buid but found none for %s\n", - dn->full_name); - dump_stack(); + + /* USB Bus children of PCI devices will not have BUID's */ + if (NULL == phb || 0 == phb->buid) return; - } info.buid_hi = BUID_HI(phb->buid); info.buid_lo = BUID_LO(phb->buid); @@ -1093,6 +884,15 @@ void eeh_add_device_early(struct device_node *dn) } EXPORT_SYMBOL_GPL(eeh_add_device_early); +void eeh_add_device_tree_early(struct device_node *dn) +{ + struct device_node *sib; + for (sib = dn->child; sib; sib = sib->sibling) + eeh_add_device_tree_early(sib); + eeh_add_device_early(dn); +} +EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); + /** * eeh_add_device_late - perform EEH initialization for the indicated pci device * @dev: pci device for which to set up EEH @@ -1118,7 +918,6 @@ void eeh_add_device_late(struct pci_dev *dev) pdn->pcidev = dev; pci_addr_cache_insert_device (dev); - eeh_save_bars(dev, pdn); } EXPORT_SYMBOL_GPL(eeh_add_device_late); @@ -1147,27 +946,28 @@ void eeh_remove_device(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(eeh_remove_device); -static int proc_eeh_show(struct seq_file *m, void *v) -{ - unsigned int cpu; - unsigned long ffs = 0, positives = 0, failures = 0; - unsigned long resets = 0; - unsigned long no_dev = 0, no_dn = 0, no_cfg = 0, no_check = 0; - - for_each_cpu(cpu) { - ffs += per_cpu(total_mmio_ffs, cpu); - positives += per_cpu(false_positives, cpu); - failures += per_cpu(ignored_failures, cpu); - resets += per_cpu(slot_resets, cpu); - no_dev += per_cpu(no_device, cpu); - no_dn += per_cpu(no_dn, cpu); - no_cfg += per_cpu(no_cfg_addr, cpu); - no_check += per_cpu(ignored_check, cpu); +void eeh_remove_bus_device(struct pci_dev *dev) +{ + eeh_remove_device(dev); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + struct pci_bus *bus = dev->subordinate; + struct list_head *ln; + if (!bus) + return; + for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { + struct pci_dev *pdev = pci_dev_b(ln); + if (pdev) + eeh_remove_bus_device(pdev); + } } +} +EXPORT_SYMBOL_GPL(eeh_remove_bus_device); +static int proc_eeh_show(struct seq_file *m, void *v) +{ if (0 == eeh_subsystem_enabled) { seq_printf(m, "EEH Subsystem is globally disabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs); + seq_printf(m, "eeh_total_mmio_ffs=%ld\n", total_mmio_ffs); } else { seq_printf(m, "EEH Subsystem is enabled\n"); seq_printf(m, @@ -1179,8 +979,10 @@ static int proc_eeh_show(struct seq_file *m, void *v) "eeh_false_positives=%ld\n" "eeh_ignored_failures=%ld\n" "eeh_slot_resets=%ld\n", - no_dev, no_dn, no_cfg, no_check, - ffs, positives, failures, resets); + no_device, no_dn, no_cfg_addr, + ignored_check, total_mmio_ffs, + false_positives, ignored_failures, + slot_resets); } return 0; diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c new file mode 100644 index 00000000000..d4a402c5866 --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_cache.c @@ -0,0 +1,316 @@ +/* + * eeh_cache.c + * PCI address cache; allows the lookup of PCI devices based on I/O address + * + * Copyright (C) 2004 Linas Vepstas <linas@austin.ibm.com> IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/rbtree.h> +#include <linux/spinlock.h> +#include <asm/atomic.h> +#include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> + +#undef DEBUG + +/** + * The pci address cache subsystem. This subsystem places + * PCI device address resources into a red-black tree, sorted + * according to the address range, so that given only an i/o + * address, the corresponding PCI device can be **quickly** + * found. It is safe to perform an address lookup in an interrupt + * context; this ability is an important feature. + * + * Currently, the only customer of this code is the EEH subsystem; + * thus, this code has been somewhat tailored to suit EEH better. + * In particular, the cache does *not* hold the addresses of devices + * for which EEH is not enabled. + * + * (Implementation Note: The RB tree seems to be better/faster + * than any hash algo I could think of for this problem, even + * with the penalty of slow pointer chases for d-cache misses). + */ +struct pci_io_addr_range +{ + struct rb_node rb_node; + unsigned long addr_lo; + unsigned long addr_hi; + struct pci_dev *pcidev; + unsigned int flags; +}; + +static struct pci_io_addr_cache +{ + struct rb_root rb_root; + spinlock_t piar_lock; +} pci_io_addr_cache_root; + +static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr) +{ + struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node; + + while (n) { + struct pci_io_addr_range *piar; + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + + if (addr < piar->addr_lo) { + n = n->rb_left; + } else { + if (addr > piar->addr_hi) { + n = n->rb_right; + } else { + pci_dev_get(piar->pcidev); + return piar->pcidev; + } + } + } + + return NULL; +} + +/** + * pci_get_device_by_addr - Get device, given only address + * @addr: mmio (PIO) phys address or i/o port number + * + * Given an mmio phys address, or a port number, find a pci device + * that implements this address. Be sure to pci_dev_put the device + * when finished. I/O port numbers are assumed to be offset + * from zero (that is, they do *not* have pci_io_addr added in). + * It is safe to call this function within an interrupt. + */ +struct pci_dev *pci_get_device_by_addr(unsigned long addr) +{ + struct pci_dev *dev; + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + dev = __pci_get_device_by_addr(addr); + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); + return dev; +} + +#ifdef DEBUG +/* + * Handy-dandy debug print routine, does nothing more + * than print out the contents of our addr cache. + */ +static void pci_addr_cache_print(struct pci_io_addr_cache *cache) +{ + struct rb_node *n; + int cnt = 0; + + n = rb_first(&cache->rb_root); + while (n) { + struct pci_io_addr_range *piar; + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n", + (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt, + piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev)); + cnt++; + n = rb_next(n); + } +} +#endif + +/* Insert address range into the rb tree. */ +static struct pci_io_addr_range * +pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, + unsigned long ahi, unsigned int flags) +{ + struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node; + struct rb_node *parent = NULL; + struct pci_io_addr_range *piar; + + /* Walk tree, find a place to insert into tree */ + while (*p) { + parent = *p; + piar = rb_entry(parent, struct pci_io_addr_range, rb_node); + if (ahi < piar->addr_lo) { + p = &parent->rb_left; + } else if (alo > piar->addr_hi) { + p = &parent->rb_right; + } else { + if (dev != piar->pcidev || + alo != piar->addr_lo || ahi != piar->addr_hi) { + printk(KERN_WARNING "PIAR: overlapping address range\n"); + } + return piar; + } + } + piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC); + if (!piar) + return NULL; + + piar->addr_lo = alo; + piar->addr_hi = ahi; + piar->pcidev = dev; + piar->flags = flags; + +#ifdef DEBUG + printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n", + alo, ahi, pci_name (dev)); +#endif + + rb_link_node(&piar->rb_node, parent, p); + rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); + + return piar; +} + +static void __pci_addr_cache_insert_device(struct pci_dev *dev) +{ + struct device_node *dn; + struct pci_dn *pdn; + int i; + int inserted = 0; + + dn = pci_device_to_OF_node(dev); + if (!dn) { + printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev)); + return; + } + + /* Skip any devices for which EEH is not enabled. */ + pdn = PCI_DN(dn); + if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || + pdn->eeh_mode & EEH_MODE_NOCHECK) { +#ifdef DEBUG + printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n", + pci_name(dev), pdn->node->full_name); +#endif + return; + } + + /* The cache holds a reference to the device... */ + pci_dev_get(dev); + + /* Walk resources on this device, poke them into the tree */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + unsigned long start = pci_resource_start(dev,i); + unsigned long end = pci_resource_end(dev,i); + unsigned int flags = pci_resource_flags(dev,i); + + /* We are interested only bus addresses, not dma or other stuff */ + if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if (start == 0 || ~start == 0 || end == 0 || ~end == 0) + continue; + pci_addr_cache_insert(dev, start, end, flags); + inserted = 1; + } + + /* If there was nothing to add, the cache has no reference... */ + if (!inserted) + pci_dev_put(dev); +} + +/** + * pci_addr_cache_insert_device - Add a device to the address cache + * @dev: PCI device whose I/O addresses we are interested in. + * + * In order to support the fast lookup of devices based on addresses, + * we maintain a cache of devices that can be quickly searched. + * This routine adds a device to that cache. + */ +void pci_addr_cache_insert_device(struct pci_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + __pci_addr_cache_insert_device(dev); + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); +} + +static inline void __pci_addr_cache_remove_device(struct pci_dev *dev) +{ + struct rb_node *n; + int removed = 0; + +restart: + n = rb_first(&pci_io_addr_cache_root.rb_root); + while (n) { + struct pci_io_addr_range *piar; + piar = rb_entry(n, struct pci_io_addr_range, rb_node); + + if (piar->pcidev == dev) { + rb_erase(n, &pci_io_addr_cache_root.rb_root); + removed = 1; + kfree(piar); + goto restart; + } + n = rb_next(n); + } + + /* The cache no longer holds its reference to this device... */ + if (removed) + pci_dev_put(dev); +} + +/** + * pci_addr_cache_remove_device - remove pci device from addr cache + * @dev: device to remove + * + * Remove a device from the addr-cache tree. + * This is potentially expensive, since it will walk + * the tree multiple times (once per resource). + * But so what; device removal doesn't need to be that fast. + */ +void pci_addr_cache_remove_device(struct pci_dev *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); + __pci_addr_cache_remove_device(dev); + spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); +} + +/** + * pci_addr_cache_build - Build a cache of I/O addresses + * + * Build a cache of pci i/o addresses. This cache will be used to + * find the pci device that corresponds to a given address. + * This routine scans all pci busses to build the cache. + * Must be run late in boot process, after the pci controllers + * have been scaned for devices (after all device resources are known). + */ +void __init pci_addr_cache_build(void) +{ + struct device_node *dn; + struct pci_dev *dev = NULL; + + spin_lock_init(&pci_io_addr_cache_root.piar_lock); + + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + /* Ignore PCI bridges */ + if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) + continue; + + pci_addr_cache_insert_device(dev); + + dn = pci_device_to_OF_node(dev); + pci_dev_get (dev); /* matching put is in eeh_remove_device() */ + PCI_DN(dn)->pcidev = dev; + } + +#ifdef DEBUG + /* Verify tree built up above, echo back the list of addrs. */ + pci_addr_cache_print(&pci_io_addr_cache_root); +#endif +} + diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c new file mode 100644 index 00000000000..6373372932b --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -0,0 +1,376 @@ +/* + * PCI Error Recovery Driver for RPA-compliant PPC64 platform. + * Copyright (C) 2004, 2005 Linas Vepstas <linas@linas.org> + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to <linas@us.ibm.com> + * + */ +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/notifier.h> +#include <linux/pci.h> +#include <asm/eeh.h> +#include <asm/eeh_event.h> +#include <asm/ppc-pci.h> +#include <asm/pci-bridge.h> +#include <asm/prom.h> +#include <asm/rtas.h> + + +static inline const char * pcid_name (struct pci_dev *pdev) +{ + if (pdev->dev.driver) + return pdev->dev.driver->name; + return ""; +} + +#ifdef DEBUG +static void print_device_node_tree (struct pci_dn *pdn, int dent) +{ + int i; + if (!pdn) return; + for (i=0;i<dent; i++) + printk(" "); + printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n", + pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr, + pdn->eeh_pe_config_addr, pdn->node->full_name); + dent += 3; + struct device_node *pc = pdn->node->child; + while (pc) { + print_device_node_tree(PCI_DN(pc), dent); + pc = pc->sibling; + } +} +#endif + +/** + * irq_in_use - return true if this irq is being used + */ +static int irq_in_use(unsigned int irq) +{ + int rc = 0; + unsigned long flags; + struct irq_desc *desc = irq_desc + irq; + + spin_lock_irqsave(&desc->lock, flags); + if (desc->action) + rc = 1; + spin_unlock_irqrestore(&desc->lock, flags); + return rc; +} + +/* ------------------------------------------------------- */ +/** eeh_report_error - report an EEH error to each device, + * collect up and merge the device responses. + */ + +static void eeh_report_error(struct pci_dev *dev, void *userdata) +{ + enum pci_ers_result rc, *res = userdata; + struct pci_driver *driver = dev->driver; + + dev->error_state = pci_channel_io_frozen; + + if (!driver) + return; + + if (irq_in_use (dev->irq)) { + struct device_node *dn = pci_device_to_OF_node(dev); + PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; + disable_irq_nosync(dev->irq); + } + if (!driver->err_handler) + return; + if (!driver->err_handler->error_detected) + return; + + rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen); + if (*res == PCI_ERS_RESULT_NONE) *res = rc; + if (*res == PCI_ERS_RESULT_NEED_RESET) return; + if (*res == PCI_ERS_RESULT_DISCONNECT && + rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; +} + +/** eeh_report_reset -- tell this device that the pci slot + * has been reset. + */ + +static void eeh_report_reset(struct pci_dev *dev, void *userdata) +{ + struct pci_driver *driver = dev->driver; + struct device_node *dn = pci_device_to_OF_node(dev); + + if (!driver) + return; + + if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) { + PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED; + enable_irq(dev->irq); + } + if (!driver->err_handler) + return; + if (!driver->err_handler->slot_reset) + return; + + driver->err_handler->slot_reset(dev); +} + +static void eeh_report_resume(struct pci_dev *dev, void *userdata) +{ + struct pci_driver *driver = dev->driver; + + dev->error_state = pci_channel_io_normal; + + if (!driver) + return; + if (!driver->err_handler) + return; + if (!driver->err_handler->resume) + return; + + driver->err_handler->resume(dev); +} + +static void eeh_report_failure(struct pci_dev *dev, void *userdata) +{ + struct pci_driver *driver = dev->driver; + + dev->error_state = pci_channel_io_perm_failure; + + if (!driver) + return; + + if (irq_in_use (dev->irq)) { + struct device_node *dn = pci_device_to_OF_node(dev); + PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; + disable_irq_nosync(dev->irq); + } + if (!driver->err_handler) + return; + if (!driver->err_handler->error_detected) + return; + driver->err_handler->error_detected(dev, pci_channel_io_perm_failure); +} + +/* ------------------------------------------------------- */ +/** + * handle_eeh_events -- reset a PCI device after hard lockup. + * + * pSeries systems will isolate a PCI slot if the PCI-Host + * bridge detects address or data parity errors, DMA's + * occuring to wild addresses (which usually happen due to + * bugs in device drivers or in PCI adapter firmware). + * Slot isolations also occur if #SERR, #PERR or other misc + * PCI-related errors are detected. + * + * Recovery process consists of unplugging the device driver + * (which generated hotplug events to userspace), then issuing + * a PCI #RST to the device, then reconfiguring the PCI config + * space for all bridges & devices under this slot, and then + * finally restarting the device drivers (which cause a second + * set of hotplug events to go out to userspace). + */ + +/** + * eeh_reset_device() -- perform actual reset of a pci slot + * Args: bus: pointer to the pci bus structure corresponding + * to the isolated slot. A non-null value will + * cause all devices under the bus to be removed + * and then re-added. + * pe_dn: pointer to a "Partionable Endpoint" device node. + * This is the top-level structure on which pci + * bus resets can be performed. + */ + +static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus) +{ + int rc; + if (bus) + pcibios_remove_pci_devices(bus); + + /* Reset the pci controller. (Asserts RST#; resets config space). + * Reconfigure bridges and devices. Don't try to bring the system + * up if the reset failed for some reason. */ + rc = rtas_set_slot_reset(pe_dn); + if (rc) + return rc; + + /* New-style config addrs might be shared across multiple devices, + * Walk over all functions on this device */ + if (pe_dn->eeh_pe_config_addr) { + struct device_node *pe = pe_dn->node; + pe = pe->parent->child; + while (pe) { + struct pci_dn *ppe = PCI_DN(pe); + if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) { + rtas_configure_bridge(ppe); + eeh_restore_bars(ppe); + } + pe = pe->sibling; + } + } else { + rtas_configure_bridge(pe_dn); + eeh_restore_bars(pe_dn); + } + + /* Give the system 5 seconds to finish running the user-space + * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes, + * this is a hack, but if we don't do this, and try to bring + * the device up before the scripts have taken it down, + * potentially weird things happen. + */ + if (bus) { + ssleep (5); + pcibios_add_pci_devices(bus); + } + + return 0; +} + +/* The longest amount of time to wait for a pci device + * to come back on line, in seconds. + */ +#define MAX_WAIT_FOR_RECOVERY 15 + +void handle_eeh_events (struct eeh_event *event) +{ + struct device_node *frozen_dn; + struct pci_dn *frozen_pdn; + struct pci_bus *frozen_bus; + int rc = 0; + enum pci_ers_result result = PCI_ERS_RESULT_NONE; + + frozen_dn = find_device_pe(event->dn); + frozen_bus = pcibios_find_pci_bus(frozen_dn); + + if (!frozen_dn) { + printk(KERN_ERR "EEH: Error: Cannot find partition endpoint for %s\n", + pci_name(event->dev)); + return; + } + + /* There are two different styles for coming up with the PE. + * In the old style, it was the highest EEH-capable device + * which was always an EADS pci bridge. In the new style, + * there might not be any EADS bridges, and even when there are, + * the firmware marks them as "EEH incapable". So another + * two-step is needed to find the pci bus.. */ + if (!frozen_bus) + frozen_bus = pcibios_find_pci_bus (frozen_dn->parent); + + if (!frozen_bus) { + printk(KERN_ERR "EEH: Cannot find PCI bus for %s\n", + frozen_dn->full_name); + return; + } + +#if 0 + /* We may get "permanent failure" messages on empty slots. + * These are false alarms. Empty slots have no child dn. */ + if ((event->state == pci_channel_io_perm_failure) && (frozen_device == NULL)) + return; +#endif + + frozen_pdn = PCI_DN(frozen_dn); + frozen_pdn->eeh_freeze_count++; + + if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES) + goto hard_fail; + + /* If the reset state is a '5' and the time to reset is 0 (infinity) + * or is more then 15 seconds, then mark this as a permanent failure. + */ + if ((event->state == pci_channel_io_perm_failure) && + ((event->time_unavail <= 0) || + (event->time_unavail > MAX_WAIT_FOR_RECOVERY*1000))) + goto hard_fail; + + eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */); + printk(KERN_WARNING + "EEH: This PCI device has failed %d times since last reboot: %s - %s\n", + frozen_pdn->eeh_freeze_count, + pci_name (frozen_pdn->pcidev), + pcid_name(frozen_pdn->pcidev)); + + /* Walk the various device drivers attached to this slot through + * a reset sequence, giving each an opportunity to do what it needs + * to accomplish the reset. Each child gets a report of the + * status ... if any child can't handle the reset, then the entire + * slot is dlpar removed and added. + */ + pci_walk_bus(frozen_bus, eeh_report_error, &result); + + /* If all device drivers were EEH-unaware, then shut + * down all of the device drivers, and hope they + * go down willingly, without panicing the system. + */ + if (result == PCI_ERS_RESULT_NONE) { + rc = eeh_reset_device(frozen_pdn, frozen_bus); + if (rc) + goto hard_fail; + } + + /* If any device called out for a reset, then reset the slot */ + if (result == PCI_ERS_RESULT_NEED_RESET) { + rc = eeh_reset_device(frozen_pdn, NULL); + if (rc) + goto hard_fail; + pci_walk_bus(frozen_bus, eeh_report_reset, 0); + } + + /* If all devices reported they can proceed, the re-enable PIO */ + if (result == PCI_ERS_RESULT_CAN_RECOVER) { + /* XXX Not supported; we brute-force reset the device */ + rc = eeh_reset_device(frozen_pdn, NULL); + if (rc) + goto hard_fail; + pci_walk_bus(frozen_bus, eeh_report_reset, 0); + } + + /* Tell all device drivers that they can resume operations */ + pci_walk_bus(frozen_bus, eeh_report_resume, 0); + + return; + +hard_fail: + /* + * About 90% of all real-life EEH failures in the field + * are due to poorly seated PCI cards. Only 10% or so are + * due to actual, failed cards. + */ + printk(KERN_ERR + "EEH: PCI device %s - %s has failed %d times \n" + "and has been permanently disabled. Please try reseating\n" + "this device or replacing it.\n", + pci_name (frozen_pdn->pcidev), + pcid_name(frozen_pdn->pcidev), + frozen_pdn->eeh_freeze_count); + + eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */); + + /* Notify all devices that they're about to go down. */ + pci_walk_bus(frozen_bus, eeh_report_failure, 0); + + /* Shut down the device drivers for good. */ + pcibios_remove_pci_devices(frozen_bus); +} + +/* ---------- end of file ---------- */ diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index 92497333c2b..9a9961f2748 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -21,6 +21,7 @@ #include <linux/list.h> #include <linux/pci.h> #include <asm/eeh_event.h> +#include <asm/ppc-pci.h> /** Overview: * EEH error states may be detected within exception handlers; @@ -37,31 +38,6 @@ static void eeh_thread_launcher(void *); DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL); /** - * eeh_panic - call panic() for an eeh event that cannot be handled. - * The philosophy of this routine is that it is better to panic and - * halt the OS than it is to risk possible data corruption by - * oblivious device drivers that don't know better. - * - * @dev pci device that had an eeh event - * @reset_state current reset state of the device slot - */ -static void eeh_panic(struct pci_dev *dev, int reset_state) -{ - /* - * Since the panic_on_oops sysctl is used to halt the system - * in light of potential corruption, we can use it here. - */ - if (panic_on_oops) { - panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, - pci_name(dev)); - } - else { - printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", - reset_state, pci_name(dev)); - } -} - -/** * eeh_event_handler - dispatch EEH events. The detection of a frozen * slot can occur inside an interrupt, where it can be hard to do * anything about it. The goal of this routine is to pull these @@ -82,10 +58,16 @@ static int eeh_event_handler(void * dummy) spin_lock_irqsave(&eeh_eventlist_lock, flags); event = NULL; + + /* Unqueue the event, get ready to process. */ if (!list_empty(&eeh_eventlist)) { event = list_entry(eeh_eventlist.next, struct eeh_event, list); list_del(&event->list); } + + if (event) + eeh_mark_slot(event->dn, EEH_MODE_RECOVERING); + spin_unlock_irqrestore(&eeh_eventlist_lock, flags); if (event == NULL) break; @@ -93,8 +75,11 @@ static int eeh_event_handler(void * dummy) printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", pci_name(event->dev)); - eeh_panic (event->dev, event->state); + handle_eeh_events(event); + + eeh_clear_slot(event->dn, EEH_MODE_RECOVERING); + pci_dev_put(event->dev); kfree(event); } @@ -122,7 +107,7 @@ static void eeh_thread_launcher(void *dummy) */ int eeh_send_failure_event (struct device_node *dn, struct pci_dev *dev, - int state, + enum pci_channel_state state, int time_unavail) { unsigned long flags; diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c index 4d584172055..22bfb5c89db 100644 --- a/arch/powerpc/platforms/pseries/hvcserver.c +++ b/arch/powerpc/platforms/pseries/hvcserver.c @@ -40,7 +40,7 @@ MODULE_VERSION(HVCS_ARCH_VERSION); * functions aren't performance sensitive, so this conversion isn't an * issue. */ -int hvcs_convert(long to_convert) +static int hvcs_convert(long to_convert) { switch (to_convert) { case H_Success: @@ -91,7 +91,7 @@ int hvcs_free_partner_info(struct list_head *head) EXPORT_SYMBOL(hvcs_free_partner_info); /* Helper function for hvcs_get_partner_info */ -int hvcs_next_partner(uint32_t unit_address, +static int hvcs_next_partner(uint32_t unit_address, unsigned long last_p_partition_ID, unsigned long last_p_unit_address, unsigned long *pi_buff) diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 2043659ea7b..48cfbfc43f9 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -51,8 +51,6 @@ #define DBG(fmt...) -extern int is_python(struct device_node *); - static void tce_build_pSeries(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction) @@ -436,7 +434,7 @@ static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) return; } - ppci = pdn->data; + ppci = PCI_DN(pdn); if (!ppci->iommu_table) { /* Bussubno hasn't been copied yet. * Do it now because iommu_table_setparms_lpar needs it. @@ -483,10 +481,10 @@ static void iommu_dev_setup_pSeries(struct pci_dev *dev) * an already allocated iommu table is found and use that. */ - while (dn && dn->data && PCI_DN(dn)->iommu_table == NULL) + while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL) dn = dn->parent; - if (dn && dn->data) { + if (dn && PCI_DN(dn)) { PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table; } else { DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, pci_name(dev)); @@ -497,7 +495,7 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti { int err = NOTIFY_OK; struct device_node *np = node; - struct pci_dn *pci = np->data; + struct pci_dn *pci = PCI_DN(np); switch (action) { case PSERIES_RECONFIG_REMOVE: @@ -533,7 +531,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) */ dn = pci_device_to_OF_node(dev); - for (pdn = dn; pdn && pdn->data && !PCI_DN(pdn)->iommu_table; + for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; pdn = pdn->parent) { dma_window = (unsigned int *) get_property(pdn, "ibm,dma-window", NULL); @@ -552,7 +550,7 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) DBG("Found DMA window, allocating table\n"); } - pci = pdn->data; + pci = PCI_DN(pdn); if (!pci->iommu_table) { /* iommu_table_setparms_lpar needs bussubno. */ pci->bussubno = pci->phb->bus->number; diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index cf1bc11b334..8952528d31a 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -24,6 +24,7 @@ #include <linux/config.h> #include <linux/kernel.h> #include <linux/dma-mapping.h> +#include <linux/console.h> #include <asm/processor.h> #include <asm/mmu.h> #include <asm/page.h> @@ -60,7 +61,7 @@ extern void pSeries_find_serial_port(void); int vtermno; /* virtual terminal# for udbg */ #define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) -static void udbg_hvsi_putc(unsigned char c) +static void udbg_hvsi_putc(char c) { /* packet's seqno isn't used anyways */ uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c }; @@ -111,7 +112,7 @@ static int udbg_hvsi_getc_poll(void) return ch; } -static unsigned char udbg_hvsi_getc(void) +static int udbg_hvsi_getc(void) { int ch; for (;;) { @@ -127,7 +128,7 @@ static unsigned char udbg_hvsi_getc(void) } } -static void udbg_putcLP(unsigned char c) +static void udbg_putcLP(char c) { char buf[16]; unsigned long rc; @@ -172,7 +173,7 @@ static int udbg_getc_pollLP(void) return ch; } -static unsigned char udbg_getcLP(void) +static int udbg_getcLP(void) { int ch; for (;;) { @@ -191,7 +192,7 @@ static unsigned char udbg_getcLP(void) /* call this from early_init() for a working debug console on * vterm capable LPAR machines */ -void udbg_init_debug_lpar(void) +void __init udbg_init_debug_lpar(void) { vtermno = 0; udbg_putc = udbg_putcLP; @@ -200,73 +201,64 @@ void udbg_init_debug_lpar(void) } /* returns 0 if couldn't find or use /chosen/stdout as console */ -int find_udbg_vterm(void) +void __init find_udbg_vterm(void) { struct device_node *stdout_node; u32 *termno; char *name; - int found = 0; + int add_console; /* find the boot console from /chosen/stdout */ if (!of_chosen) - return 0; + return; name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); if (name == NULL) - return 0; + return; stdout_node = of_find_node_by_path(name); if (!stdout_node) - return 0; - - /* now we have the stdout node; figure out what type of device it is. */ + return; name = (char *)get_property(stdout_node, "name", NULL); if (!name) { printk(KERN_WARNING "stdout node missing 'name' property!\n"); goto out; } + /* The user has requested a console so this is already set up. */ + add_console = !strstr(cmd_line, "console="); - if (strncmp(name, "vty", 3) == 0) { - if (device_is_compatible(stdout_node, "hvterm1")) { - termno = (u32 *)get_property(stdout_node, "reg", NULL); - if (termno) { - vtermno = termno[0]; - udbg_putc = udbg_putcLP; - udbg_getc = udbg_getcLP; - udbg_getc_poll = udbg_getc_pollLP; - found = 1; - } - } else if (device_is_compatible(stdout_node, "hvterm-protocol")) { - termno = (u32 *)get_property(stdout_node, "reg", NULL); - if (termno) { - vtermno = termno[0]; - udbg_putc = udbg_hvsi_putc; - udbg_getc = udbg_hvsi_getc; - udbg_getc_poll = udbg_hvsi_getc_poll; - found = 1; - } - } - } else if (strncmp(name, "serial", 6)) { - /* XXX fix ISA serial console */ - printk(KERN_WARNING "serial stdout on LPAR ('%s')! " - "can't print udbg messages\n", - stdout_node->full_name); - } else { - printk(KERN_WARNING "don't know how to print to stdout '%s'\n", - stdout_node->full_name); + /* Check if it's a virtual terminal */ + if (strncmp(name, "vty", 3) != 0) + goto out; + termno = (u32 *)get_property(stdout_node, "reg", NULL); + if (termno == NULL) + goto out; + vtermno = termno[0]; + + if (device_is_compatible(stdout_node, "hvterm1")) { + udbg_putc = udbg_putcLP; + udbg_getc = udbg_getcLP; + udbg_getc_poll = udbg_getc_pollLP; + if (add_console) + add_preferred_console("hvc", termno[0] & 0xff, NULL); + } else if (device_is_compatible(stdout_node, "hvterm-protocol")) { + vtermno = termno[0]; + udbg_putc = udbg_hvsi_putc; + udbg_getc = udbg_hvsi_getc; + udbg_getc_poll = udbg_hvsi_getc_poll; + if (add_console) + add_preferred_console("hvsi", termno[0] & 0xff, NULL); } - out: of_node_put(stdout_node); - return found; } void vpa_init(int cpu) { int hwcpu = get_hard_smp_processor_id(cpu); - unsigned long vpa = __pa(&paca[cpu].lppaca); + unsigned long vpa = __pa(&lppaca[cpu]); long ret; if (cpu_has_feature(CPU_FTR_ALTIVEC)) - paca[cpu].lppaca.vmxregs_in_use = 1; + lppaca[cpu].vmxregs_in_use = 1; ret = register_vpa(hwcpu, vpa); diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c new file mode 100644 index 00000000000..21934784f93 --- /dev/null +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -0,0 +1,174 @@ +/* + * PCI Dynamic LPAR, PCI Hot Plug and PCI EEH recovery code + * for RPA-compliant PPC64 platform. + * Copyright (C) 2003 Linda Xie <lxie@us.ibm.com> + * Copyright (C) 2005 International Business Machines + * + * Updates, 2005, John Rose <johnrose@austin.ibm.com> + * Updates, 2005, Linas Vepstas <linas@austin.ibm.com> + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/pci.h> +#include <asm/pci-bridge.h> + +static struct pci_bus * +find_bus_among_children(struct pci_bus *bus, + struct device_node *dn) +{ + struct pci_bus *child = NULL; + struct list_head *tmp; + struct device_node *busdn; + + busdn = pci_bus_to_OF_node(bus); + if (busdn == dn) + return bus; + + list_for_each(tmp, &bus->children) { + child = find_bus_among_children(pci_bus_b(tmp), dn); + if (child) + break; + }; + return child; +} + +struct pci_bus * +pcibios_find_pci_bus(struct device_node *dn) +{ + struct pci_dn *pdn = dn->data; + + if (!pdn || !pdn->phb || !pdn->phb->bus) + return NULL; + + return find_bus_among_children(pdn->phb->bus, dn); +} + +/** + * pcibios_remove_pci_devices - remove all devices under this bus + * + * Remove all of the PCI devices under this bus both from the + * linux pci device tree, and from the powerpc EEH address cache. + */ +void +pcibios_remove_pci_devices(struct pci_bus *bus) +{ + struct pci_dev *dev, *tmp; + + list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) { + eeh_remove_bus_device(dev); + pci_remove_bus_device(dev); + } +} + +/* Must be called before pci_bus_add_devices */ +void +pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + /* + * Skip already-present devices (which are on the + * global device list.) + */ + if (list_empty(&dev->global_list)) { + int i; + + /* Need to setup IOMMU tables */ + ppc_md.iommu_dev_setup(dev); + + if(fix_bus) + pcibios_fixup_device_resources(dev, bus); + pci_read_irq_line(dev); + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *r = &dev->resource[i]; + + if (r->parent || !r->start || !r->flags) + continue; + pci_claim_resource(dev, i); + } + } + } +} + +static int +pcibios_pci_config_bridge(struct pci_dev *dev) +{ + u8 sec_busno; + struct pci_bus *child_bus; + struct pci_dev *child_dev; + + /* Get busno of downstream bus */ + pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno); + + /* Add to children of PCI bridge dev->bus */ + child_bus = pci_add_new_bus(dev->bus, dev, sec_busno); + if (!child_bus) { + printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__); + return -EIO; + } + sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number); + + pci_scan_child_bus(child_bus); + + list_for_each_entry(child_dev, &child_bus->devices, bus_list) { + eeh_add_device_late(child_dev); + } + + /* Fixup new pci devices without touching bus struct */ + pcibios_fixup_new_pci_devices(child_bus, 0); + + /* Make the discovered devices available */ + pci_bus_add_devices(child_bus); + return 0; +} + +/** + * pcibios_add_pci_devices - adds new pci devices to bus + * + * This routine will find and fixup new pci devices under + * the indicated bus. This routine presumes that there + * might already be some devices under this bridge, so + * it carefully tries to add only new devices. (And that + * is how this routine differs from other, similar pcibios + * routines.) + */ +void +pcibios_add_pci_devices(struct pci_bus * bus) +{ + int slotno, num; + struct pci_dev *dev; + struct device_node *dn = pci_bus_to_OF_node(bus); + + eeh_add_device_tree_early(dn); + + /* pci_scan_slot should find all children */ + slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); + num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); + if (num) { + pcibios_fixup_new_pci_devices(bus, 1); + pci_bus_add_devices(bus); + } + + list_for_each_entry(dev, &bus->devices, bus_list) { + eeh_add_device_late (dev); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pcibios_pci_config_bridge(dev); + } +} diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index fbd214d68b0..b046bcf7443 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -49,14 +49,14 @@ #include <asm/machdep.h> #include <asm/rtas.h> #include <asm/udbg.h> +#include <asm/firmware.h> + +#include "ras.h" static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); -char mce_data_buf[RTAS_ERROR_LOG_MAX] -; -/* This is true if we are using the firmware NMI handler (typically LPAR) */ -extern int fwnmi_active; +char mce_data_buf[RTAS_ERROR_LOG_MAX]; static int ras_get_sensor_state_token; static int ras_check_exception_token; @@ -280,7 +280,7 @@ static void fwnmi_release_errinfo(void) printk("FWNMI: nmi-interlock failed: %d\n", ret); } -void pSeries_system_reset_exception(struct pt_regs *regs) +int pSeries_system_reset_exception(struct pt_regs *regs) { if (fwnmi_active) { struct rtas_error_log *errhdr = fwnmi_get_errinfo(regs); @@ -289,6 +289,7 @@ void pSeries_system_reset_exception(struct pt_regs *regs) } fwnmi_release_errinfo(); } + return 0; /* need to perform reset */ } /* diff --git a/arch/powerpc/platforms/pseries/ras.h b/arch/powerpc/platforms/pseries/ras.h new file mode 100644 index 00000000000..0e66b0da55e --- /dev/null +++ b/arch/powerpc/platforms/pseries/ras.h @@ -0,0 +1,9 @@ +#ifndef _PSERIES_RAS_H +#define _PSERIES_RAS_H + +struct pt_regs; + +extern int pSeries_system_reset_exception(struct pt_regs *regs); +extern int pSeries_machine_check_exception(struct pt_regs *regs); + +#endif /* _PSERIES_RAS_H */ diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index d8864164dbe..86cfa6ecdcf 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -350,6 +350,100 @@ static int do_remove_node(char *buf) return rv; } +static char *parse_node(char *buf, size_t bufsize, struct device_node **npp) +{ + char *handle_str; + phandle handle; + *npp = NULL; + + handle_str = buf; + + buf = strchr(buf, ' '); + if (!buf) + return NULL; + *buf = '\0'; + buf++; + + handle = simple_strtoul(handle_str, NULL, 10); + + *npp = of_find_node_by_phandle(handle); + return buf; +} + +static int do_add_property(char *buf, size_t bufsize) +{ + struct property *prop = NULL; + struct device_node *np; + unsigned char *value; + char *name, *end; + int length; + end = buf + bufsize; + buf = parse_node(buf, bufsize, &np); + + if (!np) + return -ENODEV; + + if (parse_next_property(buf, end, &name, &length, &value) == NULL) + return -EINVAL; + + prop = new_property(name, length, value, NULL); + if (!prop) + return -ENOMEM; + + prom_add_property(np, prop); + + return 0; +} + +static int do_remove_property(char *buf, size_t bufsize) +{ + struct device_node *np; + char *tmp; + struct property *prop; + buf = parse_node(buf, bufsize, &np); + + if (!np) + return -ENODEV; + + tmp = strchr(buf,' '); + if (tmp) + *tmp = '\0'; + + if (strlen(buf) == 0) + return -EINVAL; + + prop = of_find_property(np, buf, NULL); + + return prom_remove_property(np, prop); +} + +static int do_update_property(char *buf, size_t bufsize) +{ + struct device_node *np; + unsigned char *value; + char *name, *end; + int length; + struct property *newprop, *oldprop; + buf = parse_node(buf, bufsize, &np); + end = buf + bufsize; + + if (!np) + return -ENODEV; + + if (parse_next_property(buf, end, &name, &length, &value) == NULL) + return -EINVAL; + + newprop = new_property(name, length, value, NULL); + if (!newprop) + return -ENOMEM; + + oldprop = of_find_property(np, name,NULL); + if (!oldprop) + return -ENODEV; + + return prom_update_property(np, newprop, oldprop); +} + /** * ofdt_write - perform operations on the Open Firmware device tree * @@ -392,6 +486,12 @@ static ssize_t ofdt_write(struct file *file, const char __user *buf, size_t coun rv = do_add_node(tmp, count - (tmp - kbuf)); else if (!strcmp(kbuf, "remove_node")) rv = do_remove_node(tmp); + else if (!strcmp(kbuf, "add_property")) + rv = do_add_property(tmp, count - (tmp - kbuf)); + else if (!strcmp(kbuf, "remove_property")) + rv = do_remove_property(tmp, count - (tmp - kbuf)); + else if (!strcmp(kbuf, "update_property")) + rv = do_update_property(tmp, count - (tmp - kbuf)); else rv = -EINVAL; out: diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c index 2edc947f7c4..50643496eb6 100644 --- a/arch/powerpc/platforms/pseries/scanlog.c +++ b/arch/powerpc/platforms/pseries/scanlog.c @@ -192,7 +192,7 @@ struct file_operations scanlog_fops = { .release = scanlog_release, }; -int __init scanlog_init(void) +static int __init scanlog_init(void) { struct proc_dir_entry *ent; @@ -222,7 +222,7 @@ int __init scanlog_init(void) return 0; } -void __exit scanlog_cleanup(void) +static void __exit scanlog_cleanup(void) { if (proc_ppc64_scan_log_dump) { kfree(proc_ppc64_scan_log_dump->data); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 4a465f067ed..da6cebaf72c 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -56,6 +56,7 @@ #include <asm/dma.h> #include <asm/machdep.h> #include <asm/irq.h> +#include <asm/kexec.h> #include <asm/time.h> #include <asm/nvram.h> #include "xics.h" @@ -68,6 +69,7 @@ #include <asm/smp.h> #include "plpar_wrappers.h" +#include "ras.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -76,22 +78,15 @@ #endif extern void find_udbg_vterm(void); -extern void system_reset_fwnmi(void); /* from head.S */ -extern void machine_check_fwnmi(void); /* from head.S */ -extern void generic_find_legacy_serial_ports(u64 *physport, - unsigned int *default_speed); int fwnmi_active; /* TRUE if an FWNMI handler is present */ -extern void pSeries_system_reset_exception(struct pt_regs *regs); -extern int pSeries_machine_check_exception(struct pt_regs *regs); - static void pseries_shared_idle(void); static void pseries_dedicated_idle(void); struct mpic *pSeries_mpic; -void pSeries_show_cpuinfo(struct seq_file *m) +static void pSeries_show_cpuinfo(struct seq_file *m) { struct device_node *root; const char *model = ""; @@ -105,18 +100,22 @@ void pSeries_show_cpuinfo(struct seq_file *m) /* Initialize firmware assisted non-maskable interrupts if * the firmware supports this feature. - * */ static void __init fwnmi_init(void) { - int ret; + unsigned long system_reset_addr, machine_check_addr; + int ibm_nmi_register = rtas_token("ibm,nmi-register"); if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE) return; - ret = rtas_call(ibm_nmi_register, 2, 1, NULL, - __pa((unsigned long)system_reset_fwnmi), - __pa((unsigned long)machine_check_fwnmi)); - if (ret == 0) + + /* If the kernel's not linked at zero we point the firmware at low + * addresses anyway, and use a trampoline to get to the real code. */ + system_reset_addr = __pa(system_reset_fwnmi) - PHYSICAL_START; + machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START; + + if (0 == rtas_call(ibm_nmi_register, 2, 1, NULL, system_reset_addr, + machine_check_addr)) fwnmi_active = 1; } @@ -191,7 +190,7 @@ static void pseries_lpar_enable_pmcs(void) /* instruct hypervisor to maintain PMCs */ if (firmware_has_feature(FW_FEATURE_SPLPAR)) - get_paca()->lppaca.pmcregs_in_use = 1; + get_lppaca()->pmcregs_in_use = 1; } static void __init pSeries_setup_arch(void) @@ -235,7 +234,7 @@ static void __init pSeries_setup_arch(void) /* Choose an idle loop */ if (firmware_has_feature(FW_FEATURE_SPLPAR)) { vpa_init(boot_cpuid); - if (get_paca()->lppaca.shared_proc) { + if (get_lppaca()->shared_proc) { printk(KERN_INFO "Using shared processor idle loop\n"); ppc_md.idle_loop = pseries_shared_idle; } else { @@ -323,15 +322,18 @@ static void __init pSeries_discover_pic(void) ppc64_interrupt_controller = IC_INVALID; for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) { typep = (char *)get_property(np, "compatible", NULL); - if (strstr(typep, "open-pic")) + if (strstr(typep, "open-pic")) { ppc64_interrupt_controller = IC_OPEN_PIC; - else if (strstr(typep, "ppc-xicp")) + break; + } else if (strstr(typep, "ppc-xicp")) { ppc64_interrupt_controller = IC_PPC_XIC; - else - printk("pSeries_discover_pic: failed to recognize" - " interrupt-controller\n"); - break; + break; + } } + if (ppc64_interrupt_controller == IC_INVALID) + printk("pSeries_discover_pic: failed to recognize" + " interrupt-controller\n"); + } static void pSeries_mach_cpu_die(void) @@ -365,10 +367,7 @@ static int pseries_set_xdabr(unsigned long dabr) */ static void __init pSeries_init_early(void) { - void *comport; int iommu_off = 0; - unsigned int default_speed; - u64 physport; DBG(" -> pSeries_init_early()\n"); @@ -382,17 +381,8 @@ static void __init pSeries_init_early(void) get_property(of_chosen, "linux,iommu-off", NULL)); } - generic_find_legacy_serial_ports(&physport, &default_speed); - if (platform_is_lpar()) find_udbg_vterm(); - else if (physport) { - /* Map the uart for udbg. */ - comport = (void *)ioremap(physport, 16); - udbg_init_uart(comport, default_speed); - - DBG("Hello World !\n"); - } if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; @@ -454,10 +444,10 @@ DECLARE_PER_CPU(unsigned long, smt_snooze_delay); static inline void dedicated_idle_sleep(unsigned int cpu) { - struct paca_struct *ppaca = &paca[cpu ^ 1]; + struct lppaca *plppaca = &lppaca[cpu ^ 1]; /* Only sleep if the other thread is not idle */ - if (!(ppaca->lppaca.idle)) { + if (!(plppaca->idle)) { local_irq_disable(); /* @@ -490,7 +480,6 @@ static inline void dedicated_idle_sleep(unsigned int cpu) static void pseries_dedicated_idle(void) { - struct paca_struct *lpaca = get_paca(); unsigned int cpu = smp_processor_id(); unsigned long start_snooze; unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); @@ -501,7 +490,7 @@ static void pseries_dedicated_idle(void) * Indicate to the HV that we are idle. Now would be * a good time to find other work to dispatch. */ - lpaca->lppaca.idle = 1; + get_lppaca()->idle = 1; if (!need_resched()) { start_snooze = get_tb() + @@ -528,7 +517,7 @@ static void pseries_dedicated_idle(void) HMT_medium(); } - lpaca->lppaca.idle = 0; + get_lppaca()->idle = 0; ppc64_runlatch_on(); preempt_enable_no_resched(); @@ -542,7 +531,6 @@ static void pseries_dedicated_idle(void) static void pseries_shared_idle(void) { - struct paca_struct *lpaca = get_paca(); unsigned int cpu = smp_processor_id(); while (1) { @@ -550,7 +538,7 @@ static void pseries_shared_idle(void) * Indicate to the HV that we are idle. Now would be * a good time to find other work to dispatch. */ - lpaca->lppaca.idle = 1; + get_lppaca()->idle = 1; while (!need_resched() && !cpu_is_offline(cpu)) { local_irq_disable(); @@ -574,7 +562,7 @@ static void pseries_shared_idle(void) HMT_medium(); } - lpaca->lppaca.idle = 0; + get_lppaca()->idle = 0; ppc64_runlatch_on(); preempt_enable_no_resched(); @@ -598,7 +586,7 @@ static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) { /* Don't risk a hypervisor call if we're crashing */ if (!crash_shutdown) { - unsigned long vpa = __pa(&get_paca()->lppaca); + unsigned long vpa = __pa(get_lppaca()); if (unregister_vpa(hard_smp_processor_id(), vpa)) { printk("VPA deregistration of cpu %u (hw_cpu_id %d) " @@ -638,5 +626,8 @@ struct machdep_calls __initdata pSeries_md = { .machine_check_exception = pSeries_machine_check_exception, #ifdef CONFIG_KEXEC .kexec_cpu_down = pseries_kexec_cpu_down, + .machine_kexec = default_machine_kexec, + .machine_kexec_prepare = default_machine_kexec_prepare, + .machine_crash_shutdown = default_machine_crash_shutdown, #endif }; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 25181c594d7..8e6b1ed1396 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -93,7 +93,7 @@ static int query_cpu_stopped(unsigned int pcpu) return cpu_status; } -int pSeries_cpu_disable(void) +static int pSeries_cpu_disable(void) { int cpu = smp_processor_id(); @@ -109,7 +109,7 @@ int pSeries_cpu_disable(void) return 0; } -void pSeries_cpu_die(unsigned int cpu) +static void pSeries_cpu_die(unsigned int cpu) { int tries; int cpu_status; @@ -282,7 +282,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) pcpu = get_hard_smp_processor_id(lcpu); /* Fixup atomic count: it exited inside IRQ handler. */ - paca[lcpu].__current->thread_info->preempt_count = 0; + task_thread_info(paca[lcpu].__current)->preempt_count = 0; /* * If the RTAS start-cpu token does not exist then presume the diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 0377decc071..fd823c7c9ac 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -381,7 +381,7 @@ int xics_get_irq(struct pt_regs *regs) #ifdef CONFIG_SMP -irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs) { int cpu = smp_processor_id(); @@ -407,7 +407,7 @@ irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs) smp_message_recv(PPC_MSG_MIGRATE_TASK, regs); } #endif -#ifdef CONFIG_DEBUGGER +#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, &xics_ipi_message[cpu].value)) { mb(); |