1 files changed, 95 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/wsp/psr2.c b/arch/powerpc/platforms/wsp/psr2.c
new file mode 100644
index 00000000000..40f28916ff6
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/psr2.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+
+static void psr2_spin(void)
+{
+	hard_irq_disable();
+	for (;;) ;
+}
+
+static void psr2_restart(char *cmd)
+{
+	psr2_spin();
+}
+
+static int psr2_probe_devices(void)
+{
+	struct device_node *np;
+
+	/* Our RTC is a ds1500. It seems to be programatically compatible
+	 * with the ds1511 for which we have a driver so let's use that
+	 */
+	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+	if (np != NULL) {
+		struct resource res;
+		if (of_address_to_resource(np, 0, &res) == 0)
+			platform_device_register_simple("ds1511", 0, &res, 1);
+	}
+	return 0;
+}
+machine_arch_initcall(psr2_md, psr2_probe_devices);
+
+static void __init psr2_setup_arch(void)
+{
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	scom_init_wsp();
+
+	/* Setup SMP callback */
+#ifdef CONFIG_SMP
+	a2_setup_smp();
+#endif
+}
+
+static int __init psr2_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
+		return 0;
+
+	return 1;
+}
+
+static void __init psr2_init_irq(void)
+{
+	wsp_init_irq();
+	opb_pic_init();
+}
+
+define_machine(psr2_md) {
+	.name			= "PSR2 A2",
+	.probe			= psr2_probe,
+	.setup_arch		= psr2_setup_arch,
+	.restart		= psr2_restart,
+	.power_off		= psr2_spin,
+	.halt			= psr2_spin,
+	.calibrate_decr		= generic_calibrate_decr,
+	.init_IRQ		= psr2_init_irq,
+	.progress		= udbg_progress,
+	.power_save		= book3e_idle,
+};