diff options
Diffstat (limited to 'arch/powerpc/platforms')
85 files changed, 25381 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig new file mode 100644 index 00000000000..ed39d6a3d22 --- /dev/null +++ b/arch/powerpc/platforms/4xx/Kconfig @@ -0,0 +1,280 @@ +config 4xx + bool + depends on 40x || 44x + default y + +config WANT_EARLY_SERIAL + bool + select SERIAL_8250 + default n + +menu "AMCC 4xx options" + depends on 4xx + +choice + prompt "Machine Type" + depends on 40x + default WALNUT + +config BUBINGA + bool "Bubinga" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM 405EP evaluation board. + +config CPCI405 + bool "CPCI405" + help + This option enables support for the CPCI405 board. + +config EP405 + bool "EP405/EP405PC" + help + This option enables support for the EP405/EP405PC boards. + +config REDWOOD_5 + bool "Redwood-5" + help + This option enables support for the IBM STB04 evaluation board. + +config REDWOOD_6 + bool "Redwood-6" + help + This option enables support for the IBM STBx25xx evaluation board. + +config SYCAMORE + bool "Sycamore" + help + This option enables support for the IBM PPC405GPr evaluation board. + +config WALNUT + bool "Walnut" + help + This option enables support for the IBM PPC405GP evaluation board. + +config XILINX_ML300 + bool "Xilinx-ML300" + help + This option enables support for the Xilinx ML300 evaluation board. + +endchoice + +choice + prompt "Machine Type" + depends on 44x + default EBONY + +config BAMBOO + bool "Bamboo" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM PPC440EP evaluation board. + +config EBONY + bool "Ebony" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM PPC440GP evaluation board. + +config LUAN + bool "Luan" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM PPC440SP evaluation board. + +config OCOTEA + bool "Ocotea" + select WANT_EARLY_SERIAL + help + This option enables support for the IBM PPC440GX evaluation board. + +endchoice + +config EP405PC + bool "EP405PC Support" + depends on EP405 + + +# It's often necessary to know the specific 4xx processor type. +# Fortunately, it is impled (so far) from the board type, so we +# don't need to ask more redundant questions. +config NP405H + bool + depends on ASH + default y + +config 440EP + bool + depends on BAMBOO + select PPC_FPU + default y + +config 440GP + bool + depends on EBONY + default y + +config 440GX + bool + depends on OCOTEA + default y + +config 440SP + bool + depends on LUAN + default y + +config 440 + bool + depends on 440GP || 440SP || 440EP + default y + +config 440A + bool + depends on 440GX + default y + +config IBM440EP_ERR42 + bool + depends on 440EP + default y + +# All 405-based cores up until the 405GPR and 405EP have this errata. +config IBM405_ERR77 + bool + depends on 40x && !403GCX && !405GPR && !405EP + default y + +# All 40x-based cores, up until the 405GPR and 405EP have this errata. +config IBM405_ERR51 + bool + depends on 40x && !405GPR && !405EP + default y + +config BOOKE + bool + depends on 44x + default y + +config IBM_OCP + bool + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + default y + +config XILINX_OCP + bool + depends on XILINX_ML300 + default y + +config IBM_EMAC4 + bool + depends on 440GX || 440SP + default y + +config BIOS_FIXUP + bool + depends on BUBINGA || EP405 || SYCAMORE || WALNUT + default y + +# OAK doesn't exist but wanted to keep this around for any future 403GCX boards +config 403GCX + bool + depends OAK + default y + +config 405EP + bool + depends on BUBINGA + default y + +config 405GP + bool + depends on CPCI405 || EP405 || WALNUT + default y + +config 405GPR + bool + depends on SYCAMORE + default y + +config VIRTEX_II_PRO + bool + depends on XILINX_ML300 + default y + +config STB03xxx + bool + depends on REDWOOD_5 || REDWOOD_6 + default y + +config EMBEDDEDBOOT + bool + depends on EP405 || XILINX_ML300 + default y + +config IBM_OPENBIOS + bool + depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + default y + +config PPC4xx_DMA + bool "PPC4xx DMA controller support" + depends on 4xx + +config PPC4xx_EDMA + bool + depends on !STB03xxx && PPC4xx_DMA + default y + +config PPC_GEN550 + bool + depends on 4xx + default y + +choice + prompt "TTYS0 device and default console" + depends on 40x + default UART0_TTYS0 + +config UART0_TTYS0 + bool "UART0" + +config UART0_TTYS1 + bool "UART1" + +endchoice + +config SERIAL_SICC + bool "SICC Serial port support" + depends on STB03xxx + +config UART1_DFLT_CONSOLE + bool + depends on SERIAL_SICC && UART0_TTYS1 + default y + +config SERIAL_SICC_CONSOLE + bool + depends on SERIAL_SICC && UART0_TTYS1 + default y +endmenu + + +menu "IBM 40x options" + depends on 40x + +config SERIAL_SICC + bool "SICC Serial port" + depends on STB03xxx + +config UART1_DFLT_CONSOLE + bool + depends on SERIAL_SICC && UART0_TTYS1 + default y + +config SERIAL_SICC_CONSOLE + bool + depends on SERIAL_SICC && UART0_TTYS1 + default y + +endmenu diff --git a/arch/powerpc/platforms/4xx/Makefile b/arch/powerpc/platforms/4xx/Makefile new file mode 100644 index 00000000000..79ff6b1e887 --- /dev/null +++ b/arch/powerpc/platforms/4xx/Makefile @@ -0,0 +1 @@ +# empty makefile so make clean works
\ No newline at end of file diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig new file mode 100644 index 00000000000..c5bc2821d99 --- /dev/null +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -0,0 +1,86 @@ +config 85xx + bool + depends on E500 + default y + +config PPC_INDIRECT_PCI_BE + bool + depends on 85xx + default y + +menu "Freescale 85xx options" + depends on E500 + +choice + prompt "Machine Type" + depends on 85xx + default MPC8540_ADS + +config MPC8540_ADS + bool "Freescale MPC8540 ADS" + help + This option enables support for the MPC 8540 ADS evaluation board. + +config MPC8548_CDS + bool "Freescale MPC8548 CDS" + help + This option enablese support for the MPC8548 CDS evaluation board. + +config MPC8555_CDS + bool "Freescale MPC8555 CDS" + help + This option enablese support for the MPC8555 CDS evaluation board. + +config MPC8560_ADS + bool "Freescale MPC8560 ADS" + help + This option enables support for the MPC 8560 ADS evaluation board. + +config SBC8560 + bool "WindRiver PowerQUICC III SBC8560" + help + This option enables support for the WindRiver PowerQUICC III + SBC8560 board. + +config STX_GP3 + bool "Silicon Turnkey Express GP3" + help + This option enables support for the Silicon Turnkey Express GP3 + board. + +endchoice + +# It's often necessary to know the specific 85xx processor type. +# Fortunately, it is implied (so far) from the board type, so we +# don't need to ask more redundant questions. +config MPC8540 + bool + depends on MPC8540_ADS + default y + +config MPC8548 + bool + depends on MPC8548_CDS + default y + +config MPC8555 + bool + depends on MPC8555_CDS + default y + +config MPC8560 + bool + depends on SBC8560 || MPC8560_ADS || STX_GP3 + default y + +config 85xx_PCI2 + bool "Supprt for 2nd PCI host controller" + depends on MPC8555_CDS + default y + +config PPC_GEN550 + bool + depends on MPC8540 || SBC8560 || MPC8555 + default y + +endmenu diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile new file mode 100644 index 00000000000..6407197ffd8 --- /dev/null +++ b/arch/powerpc/platforms/85xx/Makefile @@ -0,0 +1 @@ +# empty makefile so make clean works diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig new file mode 100644 index 00000000000..c8c0ba3cf8e --- /dev/null +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -0,0 +1,352 @@ +config FADS + bool + +choice + prompt "8xx Machine Type" + depends on 8xx + default RPXLITE + +config RPXLITE + bool "RPX-Lite" + ---help--- + Single-board computers based around the PowerPC MPC8xx chips and + intended for embedded applications. The following types are + supported: + + RPX-Lite: + Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823. + + RPX-Classic: + Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on + the MPC 860 + + BSE-IP: + Bright Star Engineering ip-Engine. + + TQM823L: + TQM850L: + TQM855L: + TQM860L: + MPC8xx based family of mini modules, half credit card size, + up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports, + 2 x CAN bus interface, ... + Manufacturer: TQ Components, www.tq-group.de + Date of Release: October (?) 1999 + End of Life: not yet :-) + URL: + - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf> + - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf> + - images: <http://www.denx.de/embedded-ppc-en.html> + + FPS850L: + FingerPrint Sensor System (based on TQM850L) + Manufacturer: IKENDI AG, <http://www.ikendi.com/> + Date of Release: November 1999 + End of life: end 2000 ? + URL: see TQM850L + + IVMS8: + MPC860 based board used in the "Integrated Voice Mail System", + Small Version (8 voice channels) + Manufacturer: Speech Design, <http://www.speech-design.de/> + Date of Release: December 2000 (?) + End of life: - + URL: <http://www.speech-design.de/> + + IVML24: + MPC860 based board used in the "Integrated Voice Mail System", + Large Version (24 voice channels) + Manufacturer: Speech Design, <http://www.speech-design.de/> + Date of Release: March 2001 (?) + End of life: - + URL: <http://www.speech-design.de/> + + HERMES: + Hermes-Pro ISDN/LAN router with integrated 8 x hub + Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik + <http://www.multidata.de/> + Date of Release: 2000 (?) + End of life: - + URL: <http://www.multidata.de/english/products/hpro.htm> + + IP860: + VMEBus IP (Industry Pack) carrier board with MPC860 + Manufacturer: MicroSys GmbH, <http://www.microsys.de/> + Date of Release: ? + End of life: - + URL: <http://www.microsys.de/html/ip860.html> + + PCU_E: + PCU = Peripheral Controller Unit, Extended + Manufacturer: Siemens AG, ICN (Information and Communication Networks) + <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html> + Date of Release: April 2001 + End of life: August 2001 + URL: n. a. + +config RPXCLASSIC + bool "RPX-Classic" + help + The RPX-Classic is a single-board computer based on the Motorola + MPC860. It features 16MB of DRAM and a variable amount of flash, + I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two + LEDs. Variants with Ethernet ports exist. Say Y here to support it + directly. + +config BSEIP + bool "BSE-IP" + help + Say Y here to support the Bright Star Engineering ipEngine SBC. + This is a credit-card-sized device featuring a MPC823 processor, + 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video + controller, and two RS232 ports. + +config MPC8XXFADS + bool "FADS" + select FADS + +config MPC86XADS + bool "MPC86XADS" + help + MPC86x Application Development System by Freescale Semiconductor. + The MPC86xADS is meant to serve as a platform for s/w and h/w + development around the MPC86X processor families. + select FADS + +config MPC885ADS + bool "MPC885ADS" + help + Freescale Semiconductor MPC885 Application Development System (ADS). + Also known as DUET. + The MPC885ADS is meant to serve as a platform for s/w and h/w + development around the MPC885 processor family. + +config TQM823L + bool "TQM823L" + help + Say Y here to support the TQM823L, one of an MPC8xx-based family of + mini SBCs (half credit-card size) from TQ Components first released + in late 1999. Technical references are at + <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and + <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at + <http://www.denx.de/embedded-ppc-en.html>. + +config TQM850L + bool "TQM850L" + help + Say Y here to support the TQM850L, one of an MPC8xx-based family of + mini SBCs (half credit-card size) from TQ Components first released + in late 1999. Technical references are at + <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and + <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at + <http://www.denx.de/embedded-ppc-en.html>. + +config TQM855L + bool "TQM855L" + help + Say Y here to support the TQM855L, one of an MPC8xx-based family of + mini SBCs (half credit-card size) from TQ Components first released + in late 1999. Technical references are at + <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and + <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at + <http://www.denx.de/embedded-ppc-en.html>. + +config TQM860L + bool "TQM860L" + help + Say Y here to support the TQM860L, one of an MPC8xx-based family of + mini SBCs (half credit-card size) from TQ Components first released + in late 1999. Technical references are at + <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and + <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at + <http://www.denx.de/embedded-ppc-en.html>. + +config FPS850L + bool "FPS850L" + +config IVMS8 + bool "IVMS8" + help + Say Y here to support the Integrated Voice-Mail Small 8-channel SBC + from Speech Design, released March 2001. The manufacturer's website + is at <http://www.speech-design.de/>. + +config IVML24 + bool "IVML24" + help + Say Y here to support the Integrated Voice-Mail Large 24-channel SBC + from Speech Design, released March 2001. The manufacturer's website + is at <http://www.speech-design.de/>. + +config HERMES_PRO + bool "HERMES" + +config IP860 + bool "IP860" + +config LWMON + bool "LWMON" + +config PCU_E + bool "PCU_E" + +config CCM + bool "CCM" + +config LANTEC + bool "LANTEC" + +config MBX + bool "MBX" + help + MBX is a line of Motorola single-board computer based around the + MPC821 and MPC860 processors, and intended for embedded-controller + applications. Say Y here to support these boards directly. + +config WINCEPT + bool "WinCept" + help + The Wincept 100/110 is a Motorola single-board computer based on the + MPC821 PowerPC, introduced in 1998 and designed to be used in + thin-client machines. Say Y to support it directly. + +endchoice + +# +# MPC8xx Communication options +# + +menu "MPC8xx CPM Options" + depends on 8xx + +config SCC_ENET + bool "CPM SCC Ethernet" + depends on NET_ETHERNET + help + Enable Ethernet support via the Motorola MPC8xx serial + communications controller. + +choice + prompt "SCC used for Ethernet" + depends on SCC_ENET + default SCC1_ENET + +config SCC1_ENET + bool "SCC1" + help + Use MPC8xx serial communications controller 1 to drive Ethernet + (default). + +config SCC2_ENET + bool "SCC2" + help + Use MPC8xx serial communications controller 2 to drive Ethernet. + +config SCC3_ENET + bool "SCC3" + help + Use MPC8xx serial communications controller 3 to drive Ethernet. + +endchoice + +config FEC_ENET + bool "860T FEC Ethernet" + depends on NET_ETHERNET + help + Enable Ethernet support via the Fast Ethernet Controller (FCC) on + the Motorola MPC8260. + +config USE_MDIO + bool "Use MDIO for PHY configuration" + depends on FEC_ENET + help + On some boards the hardware configuration of the ethernet PHY can be + used without any software interaction over the MDIO interface, so + all MII code can be omitted. Say N here if unsure or if you don't + need link status reports. + +config FEC_AM79C874 + bool "Support AMD79C874 PHY" + depends on USE_MDIO + +config FEC_LXT970 + bool "Support LXT970 PHY" + depends on USE_MDIO + +config FEC_LXT971 + bool "Support LXT971 PHY" + depends on USE_MDIO + +config FEC_QS6612 + bool "Support QS6612 PHY" + depends on USE_MDIO + +config ENET_BIG_BUFFERS + bool "Use Big CPM Ethernet Buffers" + depends on SCC_ENET || FEC_ENET + help + Allocate large buffers for MPC8xx Ethernet. Increases throughput + and decreases the likelihood of dropped packets, but costs memory. + +config HTDMSOUND + bool "Embedded Planet HIOX Audio" + depends on SOUND=y + +# This doesn't really belong here, but it is convenient to ask +# 8xx specific questions. +comment "Generic MPC8xx Options" + +config 8xx_COPYBACK + bool "Copy-Back Data Cache (else Writethrough)" + help + Saying Y here will cause the cache on an MPC8xx processor to be used + in Copy-Back mode. If you say N here, it is used in Writethrough + mode. + + If in doubt, say Y here. + +config 8xx_CPU6 + bool "CPU6 Silicon Errata (860 Pre Rev. C)" + help + MPC860 CPUs, prior to Rev C have some bugs in the silicon, which + require workarounds for Linux (and most other OSes to work). If you + get a BUG() very early in boot, this might fix the problem. For + more details read the document entitled "MPC860 Family Device Errata + Reference" on Motorola's website. This option also incurs a + performance hit. + + If in doubt, say N here. + +choice + prompt "Microcode patch selection" + default NO_UCODE_PATCH + help + Help not implemented yet, coming soon. + +config NO_UCODE_PATCH + bool "None" + +config USB_SOF_UCODE_PATCH + bool "USB SOF patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_UCODE_PATCH + bool "I2C/SPI relocation patch" + help + Help not implemented yet, coming soon. + +config I2C_SPI_SMC1_UCODE_PATCH + bool "I2C/SPI/SMC1 relocation patch" + help + Help not implemented yet, coming soon. + +endchoice + +config UCODE_PATCH + bool + default y + depends on !NO_UCODE_PATCH + +endmenu + diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile new file mode 100644 index 00000000000..172c0db6350 --- /dev/null +++ b/arch/powerpc/platforms/Makefile @@ -0,0 +1,13 @@ +ifeq ($(CONFIG_PPC_MERGE),y) +obj-$(CONFIG_PPC_PMAC) += powermac/ +else +ifeq ($(CONFIG_PPC64),y) +obj-$(CONFIG_PPC_PMAC) += powermac/ +endif +endif +obj-$(CONFIG_PPC_CHRP) += chrp/ +obj-$(CONFIG_4xx) += 4xx/ +obj-$(CONFIG_85xx) += 85xx/ +obj-$(CONFIG_PPC_PSERIES) += pseries/ +obj-$(CONFIG_PPC_ISERIES) += iseries/ +obj-$(CONFIG_PPC_MAPLE) += maple/ diff --git a/arch/powerpc/platforms/apus/Kconfig b/arch/powerpc/platforms/apus/Kconfig new file mode 100644 index 00000000000..6bde3bffed8 --- /dev/null +++ b/arch/powerpc/platforms/apus/Kconfig @@ -0,0 +1,130 @@ + +config AMIGA + bool + depends on APUS + default y + help + This option enables support for the Amiga series of computers. + +config ZORRO + bool + depends on APUS + default y + help + This enables support for the Zorro bus in the Amiga. If you have + expansion cards in your Amiga that conform to the Amiga + AutoConfig(tm) specification, say Y, otherwise N. Note that even + expansion cards that do not fit in the Zorro slots but fit in e.g. + the CPU slot may fall in this category, so you have to say Y to let + Linux use these. + +config ABSTRACT_CONSOLE + bool + depends on APUS + default y + +config APUS_FAST_EXCEPT + bool + depends on APUS + default y + +config AMIGA_PCMCIA + bool "Amiga 1200/600 PCMCIA support" + depends on APUS && EXPERIMENTAL + help + Include support in the kernel for pcmcia on Amiga 1200 and Amiga + 600. If you intend to use pcmcia cards say Y; otherwise say N. + +config AMIGA_BUILTIN_SERIAL + tristate "Amiga builtin serial support" + depends on APUS + help + If you want to use your Amiga's built-in serial port in Linux, + answer Y. + + To compile this driver as a module, choose M here. + +config GVPIOEXT + tristate "GVP IO-Extender support" + depends on APUS + help + If you want to use a GVP IO-Extender serial card in Linux, say Y. + Otherwise, say N. + +config GVPIOEXT_LP + tristate "GVP IO-Extender parallel printer support" + depends on GVPIOEXT + help + Say Y to enable driving a printer from the parallel port on your + GVP IO-Extender card, N otherwise. + +config GVPIOEXT_PLIP + tristate "GVP IO-Extender PLIP support" + depends on GVPIOEXT + help + Say Y to enable doing IP over the parallel port on your GVP + IO-Extender card, N otherwise. + +config MULTIFACE_III_TTY + tristate "Multiface Card III serial support" + depends on APUS + help + If you want to use a Multiface III card's serial port in Linux, + answer Y. + + To compile this driver as a module, choose M here. + +config A2232 + tristate "Commodore A2232 serial support (EXPERIMENTAL)" + depends on EXPERIMENTAL && APUS + ---help--- + This option supports the 2232 7-port serial card shipped with the + Amiga 2000 and other Zorro-bus machines, dating from 1989. At + a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip + each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The + ports were connected with 8 pin DIN connectors on the card bracket, + for which 8 pin to DB25 adapters were supplied. The card also had + jumpers internally to toggle various pinning configurations. + + This driver can be built as a module; but then "generic_serial" + will also be built as a module. This has to be loaded before + "ser_a2232". If you want to do this, answer M here. + +config WHIPPET_SERIAL + tristate "Hisoft Whippet PCMCIA serial support" + depends on AMIGA_PCMCIA + help + HiSoft has a web page at <http://www.hisoft.co.uk/>, but there + is no listing for the Whippet in their Amiga section. + +config APNE + tristate "PCMCIA NE2000 support" + depends on AMIGA_PCMCIA + help + If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, + say N. + + To compile this driver as a module, choose M here: the + module will be called apne. + +config SERIAL_CONSOLE + bool "Support for serial port console" + depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y) + +config HEARTBEAT + bool "Use power LED as a heartbeat" + depends on APUS + help + Use the power-on LED on your machine as a load meter. The exact + behavior is platform-dependent, but normally the flash frequency is + a hyperbolic function of the 5-minute load average. + +config PROC_HARDWARE + bool "/proc/hardware support" + depends on APUS + +source "drivers/zorro/Kconfig" + +config PCI_PERMEDIA + bool "PCI for Permedia2" + depends on !4xx && !8xx && APUS diff --git a/arch/powerpc/platforms/chrp/Makefile b/arch/powerpc/platforms/chrp/Makefile new file mode 100644 index 00000000000..902feb1ac43 --- /dev/null +++ b/arch/powerpc/platforms/chrp/Makefile @@ -0,0 +1,4 @@ +obj-y += setup.o time.o pegasos_eth.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_NVRAM) += nvram.o diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h new file mode 100644 index 00000000000..3a2057fa314 --- /dev/null +++ b/arch/powerpc/platforms/chrp/chrp.h @@ -0,0 +1,12 @@ +/* + * Declarations of CHRP platform-specific things. + */ + +extern void chrp_nvram_init(void); +extern void chrp_get_rtc_time(struct rtc_time *); +extern int chrp_set_rtc_time(struct rtc_time *); +extern void chrp_calibrate_decr(void); +extern long chrp_time_init(void); + +extern void chrp_find_bridges(void); +extern void chrp_event_scan(void); diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c new file mode 100644 index 00000000000..4ac7125aa09 --- /dev/null +++ b/arch/powerpc/platforms/chrp/nvram.c @@ -0,0 +1,84 @@ +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * /dev/nvram driver for PPC + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <asm/uaccess.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include "chrp.h" + +static unsigned int nvram_size; +static unsigned char nvram_buf[4]; +static DEFINE_SPINLOCK(nvram_lock); + +static unsigned char chrp_nvram_read(int addr) +{ + unsigned long done, flags; + unsigned char ret; + + if (addr >= nvram_size) { + printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n", + current->comm, addr, nvram_size); + return 0xff; + } + spin_lock_irqsave(&nvram_lock, flags); + if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + ret = 0xff; + else + ret = nvram_buf[0]; + spin_unlock_irqrestore(&nvram_lock, flags); + + return ret; +} + +static void chrp_nvram_write(int addr, unsigned char val) +{ + unsigned long done, flags; + + if (addr >= nvram_size) { + printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", + current->comm, addr, nvram_size); + return; + } + spin_lock_irqsave(&nvram_lock, flags); + nvram_buf[0] = val; + if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) + printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); + spin_unlock_irqrestore(&nvram_lock, flags); +} + +void __init chrp_nvram_init(void) +{ + struct device_node *nvram; + unsigned int *nbytes_p, proplen; + + nvram = of_find_node_by_type(NULL, "nvram"); + if (nvram == NULL) + return; + + nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen); + if (nbytes_p == NULL || proplen != sizeof(unsigned int)) + return; + + nvram_size = *nbytes_p; + + printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size); + of_node_put(nvram); + + ppc_md.nvram_read_val = chrp_nvram_read; + ppc_md.nvram_write_val = chrp_nvram_write; + + return; +} diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c new file mode 100644 index 00000000000..82c429d487f --- /dev/null +++ b/arch/powerpc/platforms/chrp/pci.c @@ -0,0 +1,310 @@ +/* + * CHRP pci routines. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/ide.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/irq.h> +#include <asm/hydra.h> +#include <asm/prom.h> +#include <asm/gg2.h> +#include <asm/machdep.h> +#include <asm/sections.h> +#include <asm/pci-bridge.h> +#include <asm/open_pic.h> +#include <asm/grackle.h> +#include <asm/rtas.h> + +/* LongTrail */ +void __iomem *gg2_pci_config_base; + +/* + * The VLSI Golden Gate II has only 512K of PCI configuration space, so we + * limit the bus number to 3 bits + */ + +int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off, + int len, u32 *val) +{ + volatile void __iomem *cfg_data; + struct pci_controller *hose = bus->sysdata; + + if (bus->number > 7) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that off is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); + switch (len) { + case 1: + *val = in_8(cfg_data); + break; + case 2: + *val = in_le16(cfg_data); + break; + default: + *val = in_le32(cfg_data); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, + int len, u32 val) +{ + volatile void __iomem *cfg_data; + struct pci_controller *hose = bus->sysdata; + + if (bus->number > 7) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that off is + * suitably aligned and that len is 1, 2 or 4. + */ + cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); + switch (len) { + case 1: + out_8(cfg_data, val); + break; + case 2: + out_le16(cfg_data, val); + break; + default: + out_le32(cfg_data, val); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops gg2_pci_ops = +{ + gg2_read_config, + gg2_write_config +}; + +/* + * Access functions for PCI config space using RTAS calls. + */ +int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int ret = -1; + int rval; + + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len); + *val = ret; + return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; +} + +int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) + | (((bus->number - hose->first_busno) & 0xff) << 16) + | (hose->index << 24); + int rval; + + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL, + addr, len, val); + return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rtas_pci_ops = +{ + rtas_read_config, + rtas_write_config +}; + +volatile struct Hydra __iomem *Hydra = NULL; + +int __init +hydra_init(void) +{ + struct device_node *np; + + np = find_devices("mac-io"); + if (np == NULL || np->n_addrs == 0) + return 0; + Hydra = ioremap(np->addrs[0].address, np->addrs[0].size); + printk("Hydra Mac I/O at %lx\n", np->addrs[0].address); + printk("Hydra Feature_Control was %x", + in_le32(&Hydra->Feature_Control)); + out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN | + HYDRA_FC_SCSI_CELL_EN | + HYDRA_FC_SCCA_ENABLE | + HYDRA_FC_SCCB_ENABLE | + HYDRA_FC_ARB_BYPASS | + HYDRA_FC_MPIC_ENABLE | + HYDRA_FC_SLOW_SCC_PCLK | + HYDRA_FC_MPIC_IS_MASTER)); + printk(", now %x\n", in_le32(&Hydra->Feature_Control)); + return 1; +} + +void __init +chrp_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + struct device_node *np; + + /* PCI interrupts are controlled by the OpenPIC */ + for_each_pci_dev(dev) { + np = pci_device_to_OF_node(dev); + if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0)) + dev->irq = np->intrs[0].line; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } +} + +#define PRG_CL_RESET_VALID 0x00010000 + +static void __init +setup_python(struct pci_controller *hose, struct device_node *dev) +{ + u32 __iomem *reg; + u32 val; + unsigned long addr = dev->addrs[0].address; + + setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010); + + /* Clear the magic go-slow bit */ + reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40); + val = in_be32(®[12]); + if (val & PRG_CL_RESET_VALID) { + out_be32(®[12], val & ~PRG_CL_RESET_VALID); + in_be32(®[12]); + } + iounmap(reg); +} + +/* Marvell Discovery II based Pegasos 2 */ +static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev) +{ + struct device_node *root = find_path_device("/"); + struct device_node *rtas; + + rtas = of_find_node_by_name (root, "rtas"); + if (rtas) { + hose->ops = &rtas_pci_ops; + } else { + printk ("RTAS supporting Pegasos OF not found, please upgrade" + " your firmware\n"); + } + pci_assign_all_buses = 1; +} + +void __init +chrp_find_bridges(void) +{ + struct device_node *dev; + int *bus_range; + int len, index = -1; + struct pci_controller *hose; + unsigned int *dma; + char *model, *machine; + int is_longtrail = 0, is_mot = 0, is_pegasos = 0; + struct device_node *root = find_path_device("/"); + + /* + * The PCI host bridge nodes on some machines don't have + * properties to adequately identify them, so we have to + * look at what sort of machine this is as well. + */ + machine = get_property(root, "model", NULL); + if (machine != NULL) { + is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0; + is_mot = strncmp(machine, "MOT", 3) == 0; + if (strncmp(machine, "Pegasos2", 8) == 0) + is_pegasos = 2; + else if (strncmp(machine, "Pegasos", 7) == 0) + is_pegasos = 1; + } + for (dev = root->child; dev != NULL; dev = dev->sibling) { + if (dev->type == NULL || strcmp(dev->type, "pci") != 0) + continue; + ++index; + /* The GG2 bridge on the LongTrail doesn't have an address */ + if (dev->n_addrs < 1 && !is_longtrail) { + printk(KERN_WARNING "Can't use %s: no address\n", + dev->full_name); + continue; + } + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s\n", + dev->full_name); + continue; + } + if (bus_range[1] == bus_range[0]) + printk(KERN_INFO "PCI bus %d", bus_range[0]); + else + printk(KERN_INFO "PCI buses %d..%d", + bus_range[0], bus_range[1]); + printk(" controlled by %s", dev->type); + if (dev->n_addrs > 0) + printk(" at %lx", dev->addrs[0].address); + printk("\n"); + + hose = pcibios_alloc_controller(); + if (!hose) { + printk("Can't allocate PCI controller structure for %s\n", + dev->full_name); + continue; + } + hose->arch_data = dev; + hose->first_busno = bus_range[0]; + hose->last_busno = bus_range[1]; + + model = get_property(dev, "model", NULL); + if (model == NULL) + model = "<none>"; + if (device_is_compatible(dev, "IBM,python")) { + setup_python(hose, dev); + } else if (is_mot + || strncmp(model, "Motorola, Grackle", 17) == 0) { + setup_grackle(hose); + } else if (is_longtrail) { + void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); + hose->ops = &gg2_pci_ops; + hose->cfg_data = p; + gg2_pci_config_base = p; + } else if (is_pegasos == 1) { + setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc); + } else if (is_pegasos == 2) { + setup_peg2(hose, dev); + } else { + printk("No methods for %s (model %s), using RTAS\n", + dev->full_name, model); + hose->ops = &rtas_pci_ops; + } + + pci_process_bridge_OF_ranges(hose, dev, index == 0); + + /* check the first bridge for a property that we can + use to set pci_dram_offset */ + dma = (unsigned int *) + get_property(dev, "ibm,dma-ranges", &len); + if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) { + pci_dram_offset = dma[2] - dma[3]; + printk("pci_dram_offset = %lx\n", pci_dram_offset); + } + } + + /* Do not fixup interrupts from OF tree on pegasos */ + if (is_pegasos == 0) + ppc_md.pcibios_fixup = chrp_pcibios_fixup; +} diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c new file mode 100644 index 00000000000..a9052305c35 --- /dev/null +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -0,0 +1,213 @@ +/* + * arch/ppc/platforms/chrp_pegasos_eth.c + * + * Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de> + * Thanks to : + * Dale Farnsworth <dale@farnsworth.org> + * Mark A. Greer <mgreer@mvista.com> + * Nicolas DET <nd@bplan-gmbh.de> + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * And anyone else who helped me on this. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/mv643xx.h> +#include <linux/pci.h> + +#define PEGASOS2_MARVELL_REGBASE (0xf1000000) +#define PEGASOS2_MARVELL_REGSIZE (0x00004000) +#define PEGASOS2_SRAM_BASE (0xf2000000) +#define PEGASOS2_SRAM_SIZE (256*1024) + +#define PEGASOS2_SRAM_BASE_ETH0 (PEGASOS2_SRAM_BASE) +#define PEGASOS2_SRAM_BASE_ETH1 (PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) ) + + +#define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4) +#define PEGASOS2_SRAM_TXRING_SIZE (PEGASOS2_SRAM_SIZE/4) + +#undef BE_VERBOSE + +static struct resource mv643xx_eth_shared_resources[] = { + [0] = { + .name = "ethernet shared base", + .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, + .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + + MV643XX_ETH_SHARED_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mv643xx_eth_shared_device = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), + .resource = mv643xx_eth_shared_resources, +}; + +static struct resource mv643xx_eth0_resources[] = { + [0] = { + .name = "eth0 irq", + .start = 9, + .end = 9, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct mv643xx_eth_platform_data eth0_pd = { + .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0, + .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, + .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, + + .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE, + .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, + .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, +}; + +static struct platform_device eth0_device = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth0_resources), + .resource = mv643xx_eth0_resources, + .dev = { + .platform_data = ð0_pd, + }, +}; + +static struct resource mv643xx_eth1_resources[] = { + [0] = { + .name = "eth1 irq", + .start = 9, + .end = 9, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv643xx_eth_platform_data eth1_pd = { + .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1, + .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, + .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, + + .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE, + .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, + .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, +}; + +static struct platform_device eth1_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv643xx_eth1_resources), + .resource = mv643xx_eth1_resources, + .dev = { + .platform_data = ð1_pd, + }, +}; + +static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { + &mv643xx_eth_shared_device, + ð0_device, + ð1_device, +}; + +/***********/ +/***********/ +#define MV_READ(offset,val) { val = readl(mv643xx_reg_base + offset); } +#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset) + +static void __iomem *mv643xx_reg_base; + +static int Enable_SRAM(void) +{ + u32 ALong; + + if (mv643xx_reg_base == NULL) + mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE, + PEGASOS2_MARVELL_REGSIZE); + + if (mv643xx_reg_base == NULL) + return -ENOMEM; + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n", + (void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base); +#endif + + MV_WRITE(MV64340_SRAM_CONFIG, 0); + + MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16); + + MV_READ(MV64340_BASE_ADDR_ENABLE, ALong); + ALong &= ~(1 << 19); + MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong); + + ALong = 0x02; + ALong |= PEGASOS2_SRAM_BASE & 0xffff0000; + MV_WRITE(MV643XX_ETH_BAR_4, ALong); + + MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000); + + MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); + ALong &= ~(1 << 4); + MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: register unmapped\n"); + printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE); +#endif + + iounmap(mv643xx_reg_base); + mv643xx_reg_base = NULL; + + return 1; +} + + +/***********/ +/***********/ +int mv643xx_eth_add_pds(void) +{ + int ret = 0; + static struct pci_device_id pci_marvell_mv64360[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) }, + { } + }; + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: init\n"); +#endif + + if (pci_dev_present(pci_marvell_mv64360)) { + ret = platform_add_devices(mv643xx_eth_pd_devs, + ARRAY_SIZE(mv643xx_eth_pd_devs)); + + if ( Enable_SRAM() < 0) + { + eth0_pd.tx_sram_addr = 0; + eth0_pd.tx_sram_size = 0; + eth0_pd.rx_sram_addr = 0; + eth0_pd.rx_sram_size = 0; + + eth1_pd.tx_sram_addr = 0; + eth1_pd.tx_sram_size = 0; + eth1_pd.rx_sram_addr = 0; + eth1_pd.rx_sram_size = 0; + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: Can't enable the " + "SRAM\n"); +#endif + } + } + +#ifdef BE_VERBOSE + printk("Pegasos II/Marvell MV64361: init is over\n"); +#endif + + return ret; +} + +device_initcall(mv643xx_eth_add_pds); diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c new file mode 100644 index 00000000000..ecd32d5d85f --- /dev/null +++ b/arch/powerpc/platforms/chrp/setup.c @@ -0,0 +1,522 @@ +/* + * arch/ppc/platforms/setup.c + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + */ + +/* + * bootup setup stuff.. + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/tty.h> +#include <linux/major.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/version.h> +#include <linux/adb.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/console.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/module.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/gg2.h> +#include <asm/pci-bridge.h> +#include <asm/dma.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/hydra.h> +#include <asm/sections.h> +#include <asm/time.h> +#include <asm/btext.h> +#include <asm/i8259.h> +#include <asm/mpic.h> +#include <asm/rtas.h> +#include <asm/xmon.h> + +#include "chrp.h" + +void rtas_indicator_progress(char *, unsigned short); +void btext_progress(char *, unsigned short); + +int _chrp_type; +EXPORT_SYMBOL(_chrp_type); + +struct mpic *chrp_mpic; + +/* + * XXX this should be in xmon.h, but putting it there means xmon.h + * has to include <linux/interrupt.h> (to get irqreturn_t), which + * causes all sorts of problems. -- paulus + */ +extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); + +extern unsigned long loops_per_jiffy; + +#ifdef CONFIG_SMP +extern struct smp_ops_t chrp_smp_ops; +#endif + +static const char *gg2_memtypes[4] = { + "FPM", "SDRAM", "EDO", "BEDO" +}; +static const char *gg2_cachesizes[4] = { + "256 KB", "512 KB", "1 MB", "Reserved" +}; +static const char *gg2_cachetypes[4] = { + "Asynchronous", "Reserved", "Flow-Through Synchronous", + "Pipelined Synchronous" +}; +static const char *gg2_cachemodes[4] = { + "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" +}; + +void chrp_show_cpuinfo(struct seq_file *m) +{ + int i, sdramen; + unsigned int t; + struct device_node *root; + const char *model = ""; + + root = find_path_device("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: CHRP %s\n", model); + + /* longtrail (goldengate) stuff */ + if (!strncmp(model, "IBM,LongTrail", 13)) { + /* VLSI VAS96011/12 `Golden Gate 2' */ + /* Memory banks */ + sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) + >>31) & 1; + for (i = 0; i < (sdramen ? 4 : 6); i++) { + t = in_le32(gg2_pci_config_base+ + GG2_PCI_DRAM_BANK0+ + i*4); + if (!(t & 1)) + continue; + switch ((t>>8) & 0x1f) { + case 0x1f: + model = "4 MB"; + break; + case 0x1e: + model = "8 MB"; + break; + case 0x1c: + model = "16 MB"; + break; + case 0x18: + model = "32 MB"; + break; + case 0x10: + model = "64 MB"; + break; + case 0x00: + model = "128 MB"; + break; + default: + model = "Reserved"; + break; + } + seq_printf(m, "memory bank %d\t: %s %s\n", i, model, + gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); + } + /* L2 cache */ + t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); + seq_printf(m, "board l2\t: %s %s (%s)\n", + gg2_cachesizes[(t>>7) & 3], + gg2_cachetypes[(t>>2) & 3], + gg2_cachemodes[t & 3]); + } +} + +/* + * Fixes for the National Semiconductor PC78308VUL SuperI/O + * + * Some versions of Open Firmware incorrectly initialize the IRQ settings + * for keyboard and mouse + */ +static inline void __init sio_write(u8 val, u8 index) +{ + outb(index, 0x15c); + outb(val, 0x15d); +} + +static inline u8 __init sio_read(u8 index) +{ + outb(index, 0x15c); + return inb(0x15d); +} + +static void __init sio_fixup_irq(const char *name, u8 device, u8 level, + u8 type) +{ + u8 level0, type0, active; + + /* select logical device */ + sio_write(device, 0x07); + active = sio_read(0x30); + level0 = sio_read(0x70); + type0 = sio_read(0x71); + if (level0 != level || type0 != type || !active) { + printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " + "remapping to level %d, type %d, active\n", + name, level0, type0, !active ? "in" : "", level, type); + sio_write(0x01, 0x30); + sio_write(level, 0x70); + sio_write(type, 0x71); + } +} + +static void __init sio_init(void) +{ + struct device_node *root; + + if ((root = find_path_device("/")) && + !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) { + /* logical device 0 (KBC/Keyboard) */ + sio_fixup_irq("keyboard", 0, 1, 2); + /* select logical device 1 (KBC/Mouse) */ + sio_fixup_irq("mouse", 1, 12, 2); + } +} + + +static void __init pegasos_set_l2cr(void) +{ + struct device_node *np; + + /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ + if (_chrp_type != _CHRP_Pegasos) + return; + + /* Enable L2 cache if needed */ + np = find_type_devices("cpu"); + if (np != NULL) { + unsigned int *l2cr = (unsigned int *) + get_property (np, "l2cr", NULL); + if (l2cr == NULL) { + printk ("Pegasos l2cr : no cpu l2cr property found\n"); + return; + } + if (!((*l2cr) & 0x80000000)) { + printk ("Pegasos l2cr : L2 cache was not active, " + "activating\n"); + _set_L2CR(0); + _set_L2CR((*l2cr) | 0x80000000); + } + } +} + +void __init chrp_setup_arch(void) +{ + struct device_node *root = find_path_device ("/"); + char *machine = NULL; + struct device_node *device; + unsigned int *p = NULL; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + if (root) + machine = get_property(root, "model", NULL); + if (machine && strncmp(machine, "Pegasos", 7) == 0) { + _chrp_type = _CHRP_Pegasos; + } else if (machine && strncmp(machine, "IBM", 3) == 0) { + _chrp_type = _CHRP_IBM; + } else if (machine && strncmp(machine, "MOT", 3) == 0) { + _chrp_type = _CHRP_Motorola; + } else { + /* Let's assume it is an IBM chrp if all else fails */ + _chrp_type = _CHRP_IBM; + } + printk("chrp type = %x\n", _chrp_type); + + rtas_initialize(); + if (rtas_token("display-character") >= 0) + ppc_md.progress = rtas_progress; + +#ifdef CONFIG_BOOTX_TEXT + if (ppc_md.progress == NULL && boot_text_mapped) + ppc_md.progress = btext_progress; +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + /* this is fine for chrp */ + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + /* On pegasos, enable the L2 cache if not already done by OF */ + pegasos_set_l2cr(); + + /* Lookup PCI host bridges */ + chrp_find_bridges(); + + /* + * Temporary fixes for PCI devices. + * -- Geert + */ + hydra_init(); /* Mac I/O */ + + /* + * Fix the Super I/O configuration + */ + sio_init(); + + /* Get the event scan rate for the rtas so we know how + * often it expects a heartbeat. -- Cort + */ + device = find_devices("rtas"); + if (device) + p = (unsigned int *) get_property + (device, "rtas-event-scan-rate", NULL); + if (p && *p) { + ppc_md.heartbeat = chrp_event_scan; + ppc_md.heartbeat_reset = HZ / (*p * 30) - 1; + ppc_md.heartbeat_count = 1; + printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", + *p, ppc_md.heartbeat_reset); + } + + pci_create_OF_bus_map(); + + /* + * Print the banner, then scroll down so boot progress + * can be printed. -- Cort + */ + if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); +} + +void +chrp_event_scan(void) +{ + unsigned char log[1024]; + int ret = 0; + + /* XXX: we should loop until the hardware says no more error logs -- Cort */ + rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, + __pa(log), 1024); + ppc_md.heartbeat_count = ppc_md.heartbeat_reset; +} + +/* + * Finds the open-pic node and sets up the mpic driver. + */ +static void __init chrp_find_openpic(void) +{ + struct device_node *np, *root; + int len, i, j, irq_count; + int isu_size, idu_size; + unsigned int *iranges, *opprop = NULL; + int oplen = 0; + unsigned long opaddr; + int na = 1; + unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; + + np = find_type_devices("open-pic"); + if (np == NULL) + return; + root = find_path_device("/"); + if (root) { + opprop = (unsigned int *) get_property + (root, "platform-open-pic", &oplen); + na = prom_n_addr_cells(root); + } + if (opprop && oplen >= na * sizeof(unsigned int)) { + opaddr = opprop[na-1]; /* assume 32-bit */ + oplen /= na * sizeof(unsigned int); + } else { + if (np->n_addrs == 0) + return; + opaddr = np->addrs[0].address; + oplen = 0; + } + + printk(KERN_INFO "OpenPIC at %lx\n", opaddr); + + irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ + prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4); + + iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); + if (iranges == NULL) + len = 0; /* non-distributed mpic */ + else + len /= 2 * sizeof(unsigned int); + + /* + * The first pair of cells in interrupt-ranges refers to the + * IDU; subsequent pairs refer to the ISUs. + */ + if (oplen < len) { + printk(KERN_ERR "Insufficient addresses for distributed" + " OpenPIC (%d < %d)\n", np->n_addrs, len); + len = oplen; + } + + isu_size = 0; + idu_size = 0; + if (len > 0 && iranges[1] != 0) { + printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", + iranges[0], iranges[0] + iranges[1] - 1); + idu_size = iranges[1]; + } + if (len > 1) + isu_size = iranges[3]; + + chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY, + isu_size, NUM_ISA_INTERRUPTS, irq_count, + NR_IRQS - 4, init_senses, irq_count, + " MPIC "); + if (chrp_mpic == NULL) { + printk(KERN_ERR "Failed to allocate MPIC structure\n"); + return; + } + + j = na - 1; + for (i = 1; i < len; ++i) { + iranges += 2; + j += na; + printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n", + iranges[0], iranges[0] + iranges[1] - 1, + opprop[j]); + mpic_assign_isu(chrp_mpic, i - 1, opprop[j]); + } + + mpic_init(chrp_mpic); + mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL); +} + +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) +static struct irqaction xmon_irqaction = { + .handler = xmon_irq, + .mask = CPU_MASK_NONE, + .name = "XMON break", +}; +#endif + +void __init chrp_init_IRQ(void) +{ + struct device_node *np; + unsigned long chrp_int_ack = 0; +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) + struct device_node *kbd; +#endif + + for (np = find_devices("pci"); np != NULL; np = np->next) { + unsigned int *addrp = (unsigned int *) + get_property(np, "8259-interrupt-acknowledge", NULL); + + if (addrp == NULL) + continue; + chrp_int_ack = addrp[prom_n_addr_cells(np)-1]; + break; + } + if (np == NULL) + printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n"); + + chrp_find_openpic(); + + i8259_init(chrp_int_ack, 0); + + if (_chrp_type == _CHRP_Pegasos) + ppc_md.get_irq = i8259_irq; + else + ppc_md.get_irq = mpic_get_irq; + +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) + /* see if there is a keyboard in the device tree + with a parent of type "adb" */ + for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next) + if (kbd->parent && kbd->parent->type + && strcmp(kbd->parent->type, "adb") == 0) + break; + if (kbd) + setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); +#endif +} + +void __init +chrp_init2(void) +{ +#ifdef CONFIG_NVRAM + chrp_nvram_init(); +#endif + + request_region(0x20,0x20,"pic1"); + request_region(0xa0,0x20,"pic2"); + request_region(0x00,0x20,"dma1"); + request_region(0x40,0x20,"timer"); + request_region(0x80,0x10,"dma page reg"); + request_region(0xc0,0x20,"dma2"); + + if (ppc_md.progress) + ppc_md.progress(" Have fun! ", 0x7777); +} + +void __init chrp_init(void) +{ + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + isa_io_base = CHRP_ISA_IO_BASE; /* default value */ + ppc_do_canonicalize_irqs = 1; + + /* Assume we have an 8259... */ + __irq_offset_value = NUM_ISA_INTERRUPTS; + + ppc_md.setup_arch = chrp_setup_arch; + ppc_md.show_cpuinfo = chrp_show_cpuinfo; + + ppc_md.init_IRQ = chrp_init_IRQ; + ppc_md.init = chrp_init2; + + ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; + + ppc_md.restart = rtas_restart; + ppc_md.power_off = rtas_power_off; + ppc_md.halt = rtas_halt; + + ppc_md.time_init = chrp_time_init; + ppc_md.set_rtc_time = chrp_set_rtc_time; + ppc_md.get_rtc_time = chrp_get_rtc_time; + ppc_md.calibrate_decr = chrp_calibrate_decr; + +#ifdef CONFIG_SMP + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ +} + +#ifdef CONFIG_BOOTX_TEXT +void +btext_progress(char *s, unsigned short hex) +{ + btext_drawstring(s); + btext_drawstring("\n"); +} +#endif /* CONFIG_BOOTX_TEXT */ diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c new file mode 100644 index 00000000000..31ee49c2501 --- /dev/null +++ b/arch/powerpc/platforms/chrp/smp.c @@ -0,0 +1,122 @@ +/* + * Smp support for CHRP machines. + * + * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great + * deal of code from the sparc and intel versions. + * + * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/residual.h> +#include <asm/time.h> +#include <asm/open_pic.h> +#include <asm/machdep.h> +#include <asm/smp.h> +#include <asm/mpic.h> + +extern unsigned long smp_chrp_cpu_nr; + +static int __init smp_chrp_probe(void) +{ + struct device_node *cpus = NULL; + unsigned int *reg; + int reglen; + int ncpus = 0; + int cpuid; + unsigned int phys; + + /* Count CPUs in the device-tree */ + cpuid = 1; /* the boot cpu is logical cpu 0 */ + while ((cpus = of_find_node_by_type(cpus, "cpu")) != NULL) { + phys = ncpus; + reg = (unsigned int *) get_property(cpus, "reg", ®len); + if (reg && reglen >= sizeof(unsigned int)) + /* hmmm, not having a reg property would be bad */ + phys = *reg; + if (phys != boot_cpuid_phys) { + set_hard_smp_processor_id(cpuid, phys); + ++cpuid; + } + ++ncpus; + } + + printk(KERN_INFO "CHRP SMP probe found %d cpus\n", ncpus); + + /* Nothing more to do if less than 2 of them */ + if (ncpus <= 1) + return 1; + + mpic_request_ipis(); + + return ncpus; +} + +static void __devinit smp_chrp_kick_cpu(int nr) +{ + *(unsigned long *)KERNELBASE = nr; + asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory"); +} + +static void __devinit smp_chrp_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); +} + +static DEFINE_SPINLOCK(timebase_lock); +static unsigned int timebase_upper = 0, timebase_lower = 0; + +void __devinit smp_chrp_give_timebase(void) +{ + spin_lock(&timebase_lock); + rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); + timebase_upper = get_tbu(); + timebase_lower = get_tbl(); + spin_unlock(&timebase_lock); + + while (timebase_upper || timebase_lower) + barrier(); + rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); +} + +void __devinit smp_chrp_take_timebase(void) +{ + while (!(timebase_upper || timebase_lower)) + barrier(); + spin_lock(&timebase_lock); + set_tb(timebase_upper, timebase_lower); + timebase_upper = 0; + timebase_lower = 0; + spin_unlock(&timebase_lock); + printk("CPU %i taken timebase\n", smp_processor_id()); +} + +/* CHRP with openpic */ +struct smp_ops_t chrp_smp_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_chrp_probe, + .kick_cpu = smp_chrp_kick_cpu, + .setup_cpu = smp_chrp_setup_cpu, + .give_timebase = smp_chrp_give_timebase, + .take_timebase = smp_chrp_take_timebase, +}; diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c new file mode 100644 index 00000000000..9e53535ddb8 --- /dev/null +++ b/arch/powerpc/platforms/chrp/time.c @@ -0,0 +1,188 @@ +/* + * arch/ppc/platforms/chrp_time.c + * + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * Adapted for PowerPC (PReP) by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu). + * Copied and modified from arch/i386/kernel/time.c + * + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/kernel_stat.h> +#include <linux/mc146818rtc.h> +#include <linux/init.h> +#include <linux/bcd.h> + +#include <asm/io.h> +#include <asm/nvram.h> +#include <asm/prom.h> +#include <asm/sections.h> +#include <asm/time.h> + +extern spinlock_t rtc_lock; + +static int nvram_as1 = NVRAM_AS1; +static int nvram_as0 = NVRAM_AS0; +static int nvram_data = NVRAM_DATA; + +long __init chrp_time_init(void) +{ + struct device_node *rtcs; + int base; + + rtcs = find_compatible_devices("rtc", "pnpPNP,b00"); + if (rtcs == NULL) + rtcs = find_compatible_devices("rtc", "ds1385-rtc"); + if (rtcs == NULL || rtcs->addrs == NULL) + return 0; + base = rtcs->addrs[0].address; + nvram_as1 = 0; + nvram_as0 = base; + nvram_data = base + 1; + + return 0; +} + +int chrp_cmos_clock_read(int addr) +{ + if (nvram_as1 != 0) + outb(addr>>8, nvram_as1); + outb(addr, nvram_as0); + return (inb(nvram_data)); +} + +void chrp_cmos_clock_write(unsigned long val, int addr) +{ + if (nvram_as1 != 0) + outb(addr>>8, nvram_as1); + outb(addr, nvram_as0); + outb(val, nvram_data); + return; +} + +/* + * Set the hardware clock. -- Cort + */ +int chrp_set_rtc_time(struct rtc_time *tmarg) +{ + unsigned char save_control, save_freq_select; + struct rtc_time tm = *tmarg; + + spin_lock(&rtc_lock); + + save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */ + + chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ + + chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + tm.tm_year -= 1900; + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BIN_TO_BCD(tm.tm_sec); + BIN_TO_BCD(tm.tm_min); + BIN_TO_BCD(tm.tm_hour); + BIN_TO_BCD(tm.tm_mon); + BIN_TO_BCD(tm.tm_mday); + BIN_TO_BCD(tm.tm_year); + } + chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS); + chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES); + chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS); + chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH); + chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH); + chrp_cmos_clock_write(tm.tm_year,RTC_YEAR); + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + chrp_cmos_clock_write(save_control, RTC_CONTROL); + chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT); + + spin_unlock(&rtc_lock); + return 0; +} + +void chrp_get_rtc_time(struct rtc_time *tm) +{ + unsigned int year, mon, day, hour, min, sec; + int uip, i; + + /* The Linux interpretation of the CMOS clock register contents: + * When the Update-In-Progress (UIP) flag goes from 1 to 0, the + * RTC registers show the second which has precisely just started. + * Let's hope other operating systems interpret the RTC the same way. + */ + + /* Since the UIP flag is set for about 2.2 ms and the clock + * is typically written with a precision of 1 jiffy, trying + * to obtain a precision better than a few milliseconds is + * an illusion. Only consistency is interesting, this also + * allows to use the routine for /dev/rtc without a potential + * 1 second kernel busy loop triggered by any reader of /dev/rtc. + */ + + for ( i = 0; i<1000000; i++) { + uip = chrp_cmos_clock_read(RTC_FREQ_SELECT); + sec = chrp_cmos_clock_read(RTC_SECONDS); + min = chrp_cmos_clock_read(RTC_MINUTES); + hour = chrp_cmos_clock_read(RTC_HOURS); + day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH); + mon = chrp_cmos_clock_read(RTC_MONTH); + year = chrp_cmos_clock_read(RTC_YEAR); + uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT); + if ((uip & RTC_UIP)==0) break; + } + + if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + } + if ((year += 1900) < 1970) + year += 100; + tm->tm_sec = sec; + tm->tm_min = min; + tm->tm_hour = hour; + tm->tm_mday = day; + tm->tm_mon = mon; + tm->tm_year = year; +} + + +void __init chrp_calibrate_decr(void) +{ + struct device_node *cpu; + unsigned int freq, *fp; + + /* + * The cpu node should have a timebase-frequency property + * to tell us the rate at which the decrementer counts. + */ + freq = 16666000; /* hardcoded default */ + cpu = find_type_devices("cpu"); + if (cpu != 0) { + fp = (unsigned int *) + get_property(cpu, "timebase-frequency", NULL); + if (fp != 0) + freq = *fp; + } + ppc_tb_freq = freq; +} diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig new file mode 100644 index 00000000000..81250090f98 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -0,0 +1,318 @@ +choice + prompt "Machine Type" + depends on EMBEDDED6xx + +config KATANA + bool "Artesyn-Katana" + help + Select KATANA if configuring an Artesyn KATANA 750i or 3750 + cPCI board. + +config WILLOW + bool "Cogent-Willow" + +config CPCI690 + bool "Force-CPCI690" + help + Select CPCI690 if configuring a Force CPCI690 cPCI board. + +config POWERPMC250 + bool "Force-PowerPMC250" + +config CHESTNUT + bool "IBM 750FX Eval board or 750GX Eval board" + help + Select CHESTNUT if configuring an IBM 750FX Eval Board or a + IBM 750GX Eval board. + +config SPRUCE + bool "IBM-Spruce" + select PPC_INDIRECT_PCI + +config HDPU + bool "Sky-HDPU" + help + Select HDPU if configuring a Sky Computers Compute Blade. + +config HDPU_FEATURES + depends HDPU + tristate "HDPU-Features" + help + Select to enable HDPU enhanced features. + +config EV64260 + bool "Marvell-EV64260BP" + help + Select EV64260 if configuring a Marvell (formerly Galileo) + EV64260BP Evaluation platform. + +config LOPEC + bool "Motorola-LoPEC" + select PPC_I8259 + +config MVME5100 + bool "Motorola-MVME5100" + select PPC_INDIRECT_PCI + +config PPLUS + bool "Motorola-PowerPlus" + select PPC_I8259 + select PPC_INDIRECT_PCI + +config PRPMC750 + bool "Motorola-PrPMC750" + select PPC_INDIRECT_PCI + +config PRPMC800 + bool "Motorola-PrPMC800" + select PPC_INDIRECT_PCI + +config SANDPOINT + bool "Motorola-Sandpoint" + select PPC_I8259 + help + Select SANDPOINT if configuring for a Motorola Sandpoint X3 + (any flavor). + +config RADSTONE_PPC7D + bool "Radstone Technology PPC7D board" + select PPC_I8259 + +config PAL4 + bool "SBS-Palomar4" + +config GEMINI + bool "Synergy-Gemini" + select PPC_INDIRECT_PCI + depends on BROKEN + help + Select Gemini if configuring for a Synergy Microsystems' Gemini + series Single Board Computer. More information is available at: + <http://www.synergymicro.com/PressRel/97_10_15.html>. + +config EST8260 + bool "EST8260" + ---help--- + The EST8260 is a single-board computer manufactured by Wind River + Systems, Inc. (formerly Embedded Support Tools Corp.) and based on + the MPC8260. Wind River Systems has a website at + <http://www.windriver.com/>, but the EST8260 cannot be found on it + and has probably been discontinued or rebadged. + +config SBC82xx + bool "SBC82xx" + ---help--- + SBC PowerQUICC II, single-board computer with MPC82xx CPU + Manufacturer: Wind River Systems, Inc. + Date of Release: May 2003 + End of Life: - + URL: <http://www.windriver.com/> + +config SBS8260 + bool "SBS8260" + +config RPX8260 + bool "RPXSUPER" + +config TQM8260 + bool "TQM8260" + ---help--- + MPC8260 based module, little larger than credit card, + up to 128 MB global + 64 MB local RAM, 32 MB Flash, + 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet, + 2 x serial ports, ... + Manufacturer: TQ Components, www.tq-group.de + Date of Release: June 2001 + End of Life: not yet :-) + URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf> + +config ADS8272 + bool "ADS8272" + +config PQ2FADS + bool "Freescale-PQ2FADS" + help + Select PQ2FADS if you wish to configure for a Freescale + PQ2FADS board (-VR or -ZU). + +config LITE5200 + bool "Freescale LITE5200 / (IceCube)" + select PPC_MPC52xx + help + Support for the LITE5200 dev board for the MPC5200 from Freescale. + This is for the LITE5200 version 2.0 board. Don't know if it changes + much but it's only been tested on this board version. I think this + board is also known as IceCube. + +config MPC834x_SYS + bool "Freescale MPC834x SYS" + help + This option enables support for the MPC 834x SYS evaluation board. + + Be aware that PCI buses can only function when SYS board is plugged + into the PIB (Platform IO Board) board from Freescale which provide + 3 PCI slots. The PIBs PCI initialization is the bootloader's + responsiblilty. + +config EV64360 + bool "Marvell-EV64360BP" + help + Select EV64360 if configuring a Marvell EV64360BP Evaluation + platform. +endchoice + +config PQ2ADS + bool + depends on ADS8272 + default y + +config TQM8xxL + bool + depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) + default y + +config PPC_MPC52xx + bool + +config 8260 + bool "CPM2 Support" if WILLOW + depends on 6xx + default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS + help + The MPC8260 is a typical embedded CPU made by Motorola. Selecting + this option means that you wish to build a kernel for a machine with + an 8260 class CPU. + +config 8272 + bool + depends on 6xx + default y if ADS8272 + select 8260 + help + The MPC8272 CPM has a different internal dpram setup than other CPM2 + devices + +config 83xx + bool + default y if MPC834x_SYS + +config MPC834x + bool + default y if MPC834x_SYS + +config CPM2 + bool + depends on 8260 || MPC8560 || MPC8555 + default y + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Motorola. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it (826x, 827x, 8560). + +config PPC_GEN550 + bool + depends on SANDPOINT || SPRUCE || PPLUS || \ + PRPMC750 || PRPMC800 || LOPEC || \ + (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ + 83xx + default y + +config FORCE + bool + depends on 6xx && POWERPMC250 + default y + +config GT64260 + bool + depends on EV64260 || CPCI690 + default y + +config MV64360 # Really MV64360 & MV64460 + bool + depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360 + default y + +config MV64X60 + bool + depends on (GT64260 || MV64360) + select PPC_INDIRECT_PCI + default y + +menu "Set bridge options" + depends on MV64X60 + +config NOT_COHERENT_CACHE + bool "Turn off Cache Coherency" + default n + help + Some 64x60 bridges lock up when trying to enforce cache coherency. + When this option is selected, cache coherency will be turned off. + Note that this can cause other problems (e.g., stale data being + speculatively loaded via a cached mapping). Use at your own risk. + +config MV64X60_BASE + hex "Set bridge base used by firmware" + default "0xf1000000" + help + A firmware can leave the base address of the bridge's registers at + a non-standard location. If so, set this value to reflect the + address of that non-standard location. + +config MV64X60_NEW_BASE + hex "Set bridge base used by kernel" + default "0xf1000000" + help + If the current base address of the bridge's registers is not where + you want it, set this value to the address that you want it moved to. + +endmenu + +config NONMONARCH_SUPPORT + bool "Enable Non-Monarch Support" + depends on PRPMC800 + +config HARRIER + bool + depends on PRPMC800 + default y + +config EPIC_SERIAL_MODE + bool + depends on 6xx && (LOPEC || SANDPOINT) + default y + +config MPC10X_BRIDGE + bool + depends on POWERPMC250 || LOPEC || SANDPOINT + select PPC_INDIRECT_PCI + default y + +config MPC10X_OPENPIC + bool + depends on POWERPMC250 || LOPEC || SANDPOINT + default y + +config MPC10X_STORE_GATHERING + bool "Enable MPC10x store gathering" + depends on MPC10X_BRIDGE + +config SANDPOINT_ENABLE_UART1 + bool "Enable DUART mode on Sandpoint" + depends on SANDPOINT + help + If this option is enabled then the MPC824x processor will run + in DUART mode instead of UART mode. + +config HARRIER_STORE_GATHERING + bool "Enable Harrier store gathering" + depends on HARRIER + +config MVME5100_IPMC761_PRESENT + bool "MVME5100 configured with an IPMC761" + depends on MVME5100 + select PPC_I8259 + +config SPRUCE_BAUD_33M + bool "Spruce baud clock support" + depends on SPRUCE diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig new file mode 100644 index 00000000000..3d957a30c8c --- /dev/null +++ b/arch/powerpc/platforms/iseries/Kconfig @@ -0,0 +1,31 @@ + +menu "iSeries device drivers" + depends on PPC_ISERIES + +config VIOCONS + tristate "iSeries Virtual Console Support" + +config VIODASD + tristate "iSeries Virtual I/O disk support" + help + If you are running on an iSeries system and you want to use + virtual disks created and managed by OS/400, say Y. + +config VIOCD + tristate "iSeries Virtual I/O CD support" + help + If you are running Linux on an IBM iSeries system and you want to + read a CD drive owned by OS/400, say Y here. + +config VIOTAPE + tristate "iSeries Virtual Tape Support" + help + If you are running Linux on an iSeries system and you want Linux + to read and/or write a tape drive owned by OS/400, say Y here. + +endmenu + +config VIOPATH + bool + depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH + default y diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile new file mode 100644 index 00000000000..127b465308b --- /dev/null +++ b/arch/powerpc/platforms/iseries/Makefile @@ -0,0 +1,9 @@ +EXTRA_CFLAGS += -mno-minimal-toc + +obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o mf.o lpevents.o \ + hvcall.o proc.o htab.o iommu.o misc.o +obj-$(CONFIG_PCI) += pci.o irq.o vpdinfo.o +obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_VIOPATH) += viopath.o +obj-$(CONFIG_MODULES) += ksyms.o diff --git a/arch/powerpc/platforms/iseries/call_hpt.h b/arch/powerpc/platforms/iseries/call_hpt.h new file mode 100644 index 00000000000..321f3bb7a8f --- /dev/null +++ b/arch/powerpc/platforms/iseries/call_hpt.h @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _PLATFORMS_ISERIES_CALL_HPT_H +#define _PLATFORMS_ISERIES_CALL_HPT_H + +/* + * This file contains the "hypervisor call" interface which is used to + * drive the hypervisor from the OS. + */ + +#include <asm/iSeries/HvCallSc.h> +#include <asm/iSeries/HvTypes.h> +#include <asm/mmu.h> + +#define HvCallHptGetHptAddress HvCallHpt + 0 +#define HvCallHptGetHptPages HvCallHpt + 1 +#define HvCallHptSetPp HvCallHpt + 5 +#define HvCallHptSetSwBits HvCallHpt + 6 +#define HvCallHptUpdate HvCallHpt + 7 +#define HvCallHptInvalidateNoSyncICache HvCallHpt + 8 +#define HvCallHptGet HvCallHpt + 11 +#define HvCallHptFindNextValid HvCallHpt + 12 +#define HvCallHptFindValid HvCallHpt + 13 +#define HvCallHptAddValidate HvCallHpt + 16 +#define HvCallHptInvalidateSetSwBitsGet HvCallHpt + 18 + + +static inline u64 HvCallHpt_getHptAddress(void) +{ + return HvCall0(HvCallHptGetHptAddress); +} + +static inline u64 HvCallHpt_getHptPages(void) +{ + return HvCall0(HvCallHptGetHptPages); +} + +static inline void HvCallHpt_setPp(u32 hpteIndex, u8 value) +{ + HvCall2(HvCallHptSetPp, hpteIndex, value); +} + +static inline void HvCallHpt_setSwBits(u32 hpteIndex, u8 bitson, u8 bitsoff) +{ + HvCall3(HvCallHptSetSwBits, hpteIndex, bitson, bitsoff); +} + +static inline void HvCallHpt_invalidateNoSyncICache(u32 hpteIndex) +{ + HvCall1(HvCallHptInvalidateNoSyncICache, hpteIndex); +} + +static inline u64 HvCallHpt_invalidateSetSwBitsGet(u32 hpteIndex, u8 bitson, + u8 bitsoff) +{ + u64 compressedStatus; + + compressedStatus = HvCall4(HvCallHptInvalidateSetSwBitsGet, + hpteIndex, bitson, bitsoff, 1); + HvCall1(HvCallHptInvalidateNoSyncICache, hpteIndex); + return compressedStatus; +} + +static inline u64 HvCallHpt_findValid(hpte_t *hpte, u64 vpn) +{ + return HvCall3Ret16(HvCallHptFindValid, hpte, vpn, 0, 0); +} + +static inline u64 HvCallHpt_findNextValid(hpte_t *hpte, u32 hpteIndex, + u8 bitson, u8 bitsoff) +{ + return HvCall3Ret16(HvCallHptFindNextValid, hpte, hpteIndex, + bitson, bitsoff); +} + +static inline void HvCallHpt_get(hpte_t *hpte, u32 hpteIndex) +{ + HvCall2Ret16(HvCallHptGet, hpte, hpteIndex, 0); +} + +static inline void HvCallHpt_addValidate(u32 hpteIndex, u32 hBit, hpte_t *hpte) +{ + HvCall4(HvCallHptAddValidate, hpteIndex, hBit, hpte->v, hpte->r); +} + +#endif /* _PLATFORMS_ISERIES_CALL_HPT_H */ diff --git a/arch/powerpc/platforms/iseries/call_pci.h b/arch/powerpc/platforms/iseries/call_pci.h new file mode 100644 index 00000000000..a86e065b957 --- /dev/null +++ b/arch/powerpc/platforms/iseries/call_pci.h @@ -0,0 +1,290 @@ +/* + * Provides the Hypervisor PCI calls for iSeries Linux Parition. + * Copyright (C) 2001 <Wayne G Holm> <IBM Corporation> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + * + * Change Activity: + * Created, Jan 9, 2001 + */ + +#ifndef _PLATFORMS_ISERIES_CALL_PCI_H +#define _PLATFORMS_ISERIES_CALL_PCI_H + +#include <asm/iSeries/HvCallSc.h> +#include <asm/iSeries/HvTypes.h> + +/* + * DSA == Direct Select Address + * this struct must be 64 bits in total + */ +struct HvCallPci_DsaAddr { + u16 busNumber; /* PHB index? */ + u8 subBusNumber; /* PCI bus number? */ + u8 deviceId; /* device and function? */ + u8 barNumber; + u8 reserved[3]; +}; + +union HvDsaMap { + u64 DsaAddr; + struct HvCallPci_DsaAddr Dsa; +}; + +struct HvCallPci_LoadReturn { + u64 rc; + u64 value; +}; + +enum HvCallPci_DeviceType { + HvCallPci_NodeDevice = 1, + HvCallPci_SpDevice = 2, + HvCallPci_IopDevice = 3, + HvCallPci_BridgeDevice = 4, + HvCallPci_MultiFunctionDevice = 5, + HvCallPci_IoaDevice = 6 +}; + + +struct HvCallPci_DeviceInfo { + u32 deviceType; /* See DeviceType enum for values */ +}; + +struct HvCallPci_BusUnitInfo { + u32 sizeReturned; /* length of data returned */ + u32 deviceType; /* see DeviceType enum for values */ +}; + +struct HvCallPci_BridgeInfo { + struct HvCallPci_BusUnitInfo busUnitInfo; /* Generic bus unit info */ + u8 subBusNumber; /* Bus number of secondary bus */ + u8 maxAgents; /* Max idsels on secondary bus */ + u8 maxSubBusNumber; /* Max Sub Bus */ + u8 logicalSlotNumber; /* Logical Slot Number for IOA */ +}; + + +/* + * Maximum BusUnitInfo buffer size. Provided for clients so + * they can allocate a buffer big enough for any type of bus + * unit. Increase as needed. + */ +enum {HvCallPci_MaxBusUnitInfoSize = 128}; + +struct HvCallPci_BarParms { + u64 vaddr; + u64 raddr; + u64 size; + u64 protectStart; + u64 protectEnd; + u64 relocationOffset; + u64 pciAddress; + u64 reserved[3]; +}; + +enum HvCallPci_VpdType { + HvCallPci_BusVpd = 1, + HvCallPci_BusAdapterVpd = 2 +}; + +#define HvCallPciConfigLoad8 HvCallPci + 0 +#define HvCallPciConfigLoad16 HvCallPci + 1 +#define HvCallPciConfigLoad32 HvCallPci + 2 +#define HvCallPciConfigStore8 HvCallPci + 3 +#define HvCallPciConfigStore16 HvCallPci + 4 +#define HvCallPciConfigStore32 HvCallPci + 5 +#define HvCallPciEoi HvCallPci + 16 +#define HvCallPciGetBarParms HvCallPci + 18 +#define HvCallPciMaskFisr HvCallPci + 20 +#define HvCallPciUnmaskFisr HvCallPci + 21 +#define HvCallPciSetSlotReset HvCallPci + 25 +#define HvCallPciGetDeviceInfo HvCallPci + 27 +#define HvCallPciGetCardVpd HvCallPci + 28 +#define HvCallPciBarLoad8 HvCallPci + 40 +#define HvCallPciBarLoad16 HvCallPci + 41 +#define HvCallPciBarLoad32 HvCallPci + 42 +#define HvCallPciBarLoad64 HvCallPci + 43 +#define HvCallPciBarStore8 HvCallPci + 44 +#define HvCallPciBarStore16 HvCallPci + 45 +#define HvCallPciBarStore32 HvCallPci + 46 +#define HvCallPciBarStore64 HvCallPci + 47 +#define HvCallPciMaskInterrupts HvCallPci + 48 +#define HvCallPciUnmaskInterrupts HvCallPci + 49 +#define HvCallPciGetBusUnitInfo HvCallPci + 50 + +static inline u64 HvCallPci_configLoad16(u16 busNumber, u8 subBusNumber, + u8 deviceId, u32 offset, u16 *value) +{ + struct HvCallPci_DsaAddr dsa; + struct HvCallPci_LoadReturn retVal; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumber; + dsa.subBusNumber = subBusNumber; + dsa.deviceId = deviceId; + + HvCall3Ret16(HvCallPciConfigLoad16, &retVal, *(u64 *)&dsa, offset, 0); + + *value = retVal.value; + + return retVal.rc; +} + +static inline u64 HvCallPci_configStore8(u16 busNumber, u8 subBusNumber, + u8 deviceId, u32 offset, u8 value) +{ + struct HvCallPci_DsaAddr dsa; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumber; + dsa.subBusNumber = subBusNumber; + dsa.deviceId = deviceId; + + return HvCall4(HvCallPciConfigStore8, *(u64 *)&dsa, offset, value, 0); +} + +static inline u64 HvCallPci_eoi(u16 busNumberParm, u8 subBusParm, + u8 deviceIdParm) +{ + struct HvCallPci_DsaAddr dsa; + struct HvCallPci_LoadReturn retVal; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumberParm; + dsa.subBusNumber = subBusParm; + dsa.deviceId = deviceIdParm; + + HvCall1Ret16(HvCallPciEoi, &retVal, *(u64*)&dsa); + + return retVal.rc; +} + +static inline u64 HvCallPci_getBarParms(u16 busNumberParm, u8 subBusParm, + u8 deviceIdParm, u8 barNumberParm, u64 parms, u32 sizeofParms) +{ + struct HvCallPci_DsaAddr dsa; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumberParm; + dsa.subBusNumber = subBusParm; + dsa.deviceId = deviceIdParm; + dsa.barNumber = barNumberParm; + + return HvCall3(HvCallPciGetBarParms, *(u64*)&dsa, parms, sizeofParms); +} + +static inline u64 HvCallPci_maskFisr(u16 busNumberParm, u8 subBusParm, + u8 deviceIdParm, u64 fisrMask) +{ + struct HvCallPci_DsaAddr dsa; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumberParm; + dsa.subBusNumber = subBusParm; + dsa.deviceId = deviceIdParm; + + return HvCall2(HvCallPciMaskFisr, *(u64*)&dsa, fisrMask); +} + +static inline u64 HvCallPci_unmaskFisr(u16 busNumberParm, u8 subBusParm, + u8 deviceIdParm, u64 fisrMask) +{ + struct HvCallPci_DsaAddr dsa; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumberParm; + dsa.subBusNumber = subBusParm; + dsa.deviceId = deviceIdParm; + + return HvCall2(HvCallPciUnmaskFisr, *(u64*)&dsa, fisrMask); +} + +static inline u64 HvCallPci_getDeviceInfo(u16 busNumberParm, u8 subBusParm, + u8 deviceNumberParm, u64 parms, u32 sizeofParms) +{ + struct HvCallPci_DsaAddr dsa; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumberParm; + dsa.subBusNumber = subBusParm; + dsa.deviceId = deviceNumberParm << 4; + + return HvCall3(HvCallPciGetDeviceInfo, *(u64*)&dsa, parms, sizeofParms); +} + +static inline u64 HvCallPci_maskInterrupts(u16 busNumberParm, u8 subBusParm, + u8 deviceIdParm, u64 interruptMask) +{ + struct HvCallPci_DsaAddr dsa; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumberParm; + dsa.subBusNumber = subBusParm; + dsa.deviceId = deviceIdParm; + + return HvCall2(HvCallPciMaskInterrupts, *(u64*)&dsa, interruptMask); +} + +static inline u64 HvCallPci_unmaskInterrupts(u16 busNumberParm, u8 subBusParm, + u8 deviceIdParm, u64 interruptMask) +{ + struct HvCallPci_DsaAddr dsa; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumberParm; + dsa.subBusNumber = subBusParm; + dsa.deviceId = deviceIdParm; + + return HvCall2(HvCallPciUnmaskInterrupts, *(u64*)&dsa, interruptMask); +} + +static inline u64 HvCallPci_getBusUnitInfo(u16 busNumberParm, u8 subBusParm, + u8 deviceIdParm, u64 parms, u32 sizeofParms) +{ + struct HvCallPci_DsaAddr dsa; + + *((u64*)&dsa) = 0; + + dsa.busNumber = busNumberParm; + dsa.subBusNumber = subBusParm; + dsa.deviceId = deviceIdParm; + + return HvCall3(HvCallPciGetBusUnitInfo, *(u64*)&dsa, parms, + sizeofParms); +} + +static inline int HvCallPci_getBusVpd(u16 busNumParm, u64 destParm, + u16 sizeParm) +{ + u64 xRc = HvCall4(HvCallPciGetCardVpd, busNumParm, destParm, + sizeParm, HvCallPci_BusVpd); + if (xRc == -1) + return -1; + else + return xRc & 0xFFFF; +} + +#endif /* _PLATFORMS_ISERIES_CALL_PCI_H */ diff --git a/arch/powerpc/platforms/iseries/call_sm.h b/arch/powerpc/platforms/iseries/call_sm.h new file mode 100644 index 00000000000..ef223166cf2 --- /dev/null +++ b/arch/powerpc/platforms/iseries/call_sm.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ISERIES_CALL_SM_H +#define _ISERIES_CALL_SM_H + +/* + * This file contains the "hypervisor call" interface which is used to + * drive the hypervisor from the OS. + */ + +#include <asm/iSeries/HvCallSc.h> +#include <asm/iSeries/HvTypes.h> + +#define HvCallSmGet64BitsOfAccessMap HvCallSm + 11 + +static inline u64 HvCallSm_get64BitsOfAccessMap(HvLpIndex lpIndex, + u64 indexIntoBitMap) +{ + return HvCall2(HvCallSmGet64BitsOfAccessMap, lpIndex, indexIntoBitMap); +} + +#endif /* _ISERIES_CALL_SM_H */ diff --git a/arch/powerpc/platforms/iseries/htab.c b/arch/powerpc/platforms/iseries/htab.c new file mode 100644 index 00000000000..b3c6c3374ca --- /dev/null +++ b/arch/powerpc/platforms/iseries/htab.c @@ -0,0 +1,257 @@ +/* + * iSeries hashtable management. + * Derived from pSeries_htab.c + * + * SMP scalability work: + * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <asm/machdep.h> +#include <asm/pgtable.h> +#include <asm/mmu.h> +#include <asm/mmu_context.h> +#include <asm/abs_addr.h> +#include <linux/spinlock.h> + +#include "call_hpt.h" + +static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp = + { [0 ... 63] = SPIN_LOCK_UNLOCKED}; + +/* + * Very primitive algorithm for picking up a lock + */ +static inline void iSeries_hlock(unsigned long slot) +{ + if (slot & 0x8) + slot = ~slot; + spin_lock(&iSeries_hlocks[(slot >> 4) & 0x3f]); +} + +static inline void iSeries_hunlock(unsigned long slot) +{ + if (slot & 0x8) + slot = ~slot; + spin_unlock(&iSeries_hlocks[(slot >> 4) & 0x3f]); +} + +static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, + unsigned long prpn, unsigned long vflags, + unsigned long rflags) +{ + unsigned long arpn; + long slot; + hpte_t lhpte; + int secondary = 0; + + /* + * The hypervisor tries both primary and secondary. + * If we are being called to insert in the secondary, + * it means we have already tried both primary and secondary, + * so we return failure immediately. + */ + if (vflags & HPTE_V_SECONDARY) + return -1; + + iSeries_hlock(hpte_group); + + slot = HvCallHpt_findValid(&lhpte, va >> PAGE_SHIFT); + BUG_ON(lhpte.v & HPTE_V_VALID); + + if (slot == -1) { /* No available entry found in either group */ + iSeries_hunlock(hpte_group); + return -1; + } + + if (slot < 0) { /* MSB set means secondary group */ + vflags |= HPTE_V_SECONDARY; + secondary = 1; + slot &= 0x7fffffffffffffff; + } + + arpn = phys_to_abs(prpn << PAGE_SHIFT) >> PAGE_SHIFT; + + lhpte.v = (va >> 23) << HPTE_V_AVPN_SHIFT | vflags | HPTE_V_VALID; + lhpte.r = (arpn << HPTE_R_RPN_SHIFT) | rflags; + + /* Now fill in the actual HPTE */ + HvCallHpt_addValidate(slot, secondary, &lhpte); + + iSeries_hunlock(hpte_group); + + return (secondary << 3) | (slot & 7); +} + +long iSeries_hpte_bolt_or_insert(unsigned long hpte_group, + unsigned long va, unsigned long prpn, unsigned long vflags, + unsigned long rflags) +{ + long slot; + hpte_t lhpte; + + slot = HvCallHpt_findValid(&lhpte, va >> PAGE_SHIFT); + + if (lhpte.v & HPTE_V_VALID) { + /* Bolt the existing HPTE */ + HvCallHpt_setSwBits(slot, 0x10, 0); + HvCallHpt_setPp(slot, PP_RWXX); + return 0; + } + + return iSeries_hpte_insert(hpte_group, va, prpn, vflags, rflags); +} + +static unsigned long iSeries_hpte_getword0(unsigned long slot) +{ + hpte_t hpte; + + HvCallHpt_get(&hpte, slot); + return hpte.v; +} + +static long iSeries_hpte_remove(unsigned long hpte_group) +{ + unsigned long slot_offset; + int i; + unsigned long hpte_v; + + /* Pick a random slot to start at */ + slot_offset = mftb() & 0x7; + + iSeries_hlock(hpte_group); + + for (i = 0; i < HPTES_PER_GROUP; i++) { + hpte_v = iSeries_hpte_getword0(hpte_group + slot_offset); + + if (! (hpte_v & HPTE_V_BOLTED)) { + HvCallHpt_invalidateSetSwBitsGet(hpte_group + + slot_offset, 0, 0); + iSeries_hunlock(hpte_group); + return i; + } + + slot_offset++; + slot_offset &= 0x7; + } + + iSeries_hunlock(hpte_group); + + return -1; +} + +/* + * The HyperVisor expects the "flags" argument in this form: + * bits 0..59 : reserved + * bit 60 : N + * bits 61..63 : PP2,PP1,PP0 + */ +static long iSeries_hpte_updatepp(unsigned long slot, unsigned long newpp, + unsigned long va, int large, int local) +{ + hpte_t hpte; + unsigned long avpn = va >> 23; + + iSeries_hlock(slot); + + HvCallHpt_get(&hpte, slot); + if ((HPTE_V_AVPN_VAL(hpte.v) == avpn) && (hpte.v & HPTE_V_VALID)) { + /* + * Hypervisor expects bits as NPPP, which is + * different from how they are mapped in our PP. + */ + HvCallHpt_setPp(slot, (newpp & 0x3) | ((newpp & 0x4) << 1)); + iSeries_hunlock(slot); + return 0; + } + iSeries_hunlock(slot); + + return -1; +} + +/* + * Functions used to find the PTE for a particular virtual address. + * Only used during boot when bolting pages. + * + * Input : vpn : virtual page number + * Output: PTE index within the page table of the entry + * -1 on failure + */ +static long iSeries_hpte_find(unsigned long vpn) +{ + hpte_t hpte; + long slot; + + /* + * The HvCallHpt_findValid interface is as follows: + * 0xffffffffffffffff : No entry found. + * 0x00000000xxxxxxxx : Entry found in primary group, slot x + * 0x80000000xxxxxxxx : Entry found in secondary group, slot x + */ + slot = HvCallHpt_findValid(&hpte, vpn); + if (hpte.v & HPTE_V_VALID) { + if (slot < 0) { + slot &= 0x7fffffffffffffff; + slot = -slot; + } + } else + slot = -1; + return slot; +} + +/* + * Update the page protection bits. Intended to be used to create + * guard pages for kernel data structures on pages which are bolted + * in the HPT. Assumes pages being operated on will not be stolen. + * Does not work on large pages. + * + * No need to lock here because we should be the only user. + */ +static void iSeries_hpte_updateboltedpp(unsigned long newpp, unsigned long ea) +{ + unsigned long vsid,va,vpn; + long slot; + + vsid = get_kernel_vsid(ea); + va = (vsid << 28) | (ea & 0x0fffffff); + vpn = va >> PAGE_SHIFT; + slot = iSeries_hpte_find(vpn); + if (slot == -1) + panic("updateboltedpp: Could not find page to bolt\n"); + HvCallHpt_setPp(slot, newpp); +} + +static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va, + int large, int local) +{ + unsigned long hpte_v; + unsigned long avpn = va >> 23; + unsigned long flags; + + local_irq_save(flags); + + iSeries_hlock(slot); + + hpte_v = iSeries_hpte_getword0(slot); + + if ((HPTE_V_AVPN_VAL(hpte_v) == avpn) && (hpte_v & HPTE_V_VALID)) + HvCallHpt_invalidateSetSwBitsGet(slot, 0, 0); + + iSeries_hunlock(slot); + + local_irq_restore(flags); +} + +void hpte_init_iSeries(void) +{ + ppc_md.hpte_invalidate = iSeries_hpte_invalidate; + ppc_md.hpte_updatepp = iSeries_hpte_updatepp; + ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp; + ppc_md.hpte_insert = iSeries_hpte_insert; + ppc_md.hpte_remove = iSeries_hpte_remove; + + htab_finish_init(); +} diff --git a/arch/powerpc/platforms/iseries/hvcall.S b/arch/powerpc/platforms/iseries/hvcall.S new file mode 100644 index 00000000000..07ae6ad5f49 --- /dev/null +++ b/arch/powerpc/platforms/iseries/hvcall.S @@ -0,0 +1,94 @@ +/* + * This file contains the code to perform calls to the + * iSeries LPAR hypervisor + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/ppc_asm.h> +#include <asm/processor.h> +#include <asm/ptrace.h> /* XXX for STACK_FRAME_OVERHEAD */ + + .text + +/* + * Hypervisor call + * + * Invoke the iSeries hypervisor via the System Call instruction + * Parameters are passed to this routine in registers r3 - r10 + * + * r3 contains the HV function to be called + * r4-r10 contain the operands to the hypervisor function + * + */ + +_GLOBAL(HvCall) +_GLOBAL(HvCall0) +_GLOBAL(HvCall1) +_GLOBAL(HvCall2) +_GLOBAL(HvCall3) +_GLOBAL(HvCall4) +_GLOBAL(HvCall5) +_GLOBAL(HvCall6) +_GLOBAL(HvCall7) + + + mfcr r0 + std r0,-8(r1) + stdu r1,-(STACK_FRAME_OVERHEAD+16)(r1) + + /* r0 = 0xffffffffffffffff indicates a hypervisor call */ + + li r0,-1 + + /* Invoke the hypervisor */ + + sc + + ld r1,0(r1) + ld r0,-8(r1) + mtcrf 0xff,r0 + + /* return to caller, return value in r3 */ + + blr + +_GLOBAL(HvCall0Ret16) +_GLOBAL(HvCall1Ret16) +_GLOBAL(HvCall2Ret16) +_GLOBAL(HvCall3Ret16) +_GLOBAL(HvCall4Ret16) +_GLOBAL(HvCall5Ret16) +_GLOBAL(HvCall6Ret16) +_GLOBAL(HvCall7Ret16) + + mfcr r0 + std r0,-8(r1) + std r31,-16(r1) + stdu r1,-(STACK_FRAME_OVERHEAD+32)(r1) + + mr r31,r4 + li r0,-1 + mr r4,r5 + mr r5,r6 + mr r6,r7 + mr r7,r8 + mr r8,r9 + mr r9,r10 + + sc + + std r3,0(r31) + std r4,8(r31) + + mr r3,r5 + + ld r1,0(r1) + ld r0,-8(r1) + mtcrf 0xff,r0 + ld r31,-16(r1) + + blr diff --git a/arch/powerpc/platforms/iseries/hvlog.c b/arch/powerpc/platforms/iseries/hvlog.c new file mode 100644 index 00000000000..f61e2e9ac9e --- /dev/null +++ b/arch/powerpc/platforms/iseries/hvlog.c @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <asm/page.h> +#include <asm/abs_addr.h> +#include <asm/iSeries/HvCall.h> +#include <asm/iSeries/HvCallSc.h> +#include <asm/iSeries/HvTypes.h> + + +void HvCall_writeLogBuffer(const void *buffer, u64 len) +{ + struct HvLpBufferList hv_buf; + u64 left_this_page; + u64 cur = virt_to_abs(buffer); + + while (len) { + hv_buf.addr = cur; + left_this_page = ((cur & PAGE_MASK) + PAGE_SIZE) - cur; + if (left_this_page > len) + left_this_page = len; + hv_buf.len = left_this_page; + len -= left_this_page; + HvCall2(HvCallBaseWriteLogBuffer, + virt_to_abs(&hv_buf), + left_this_page); + cur = (cur & PAGE_MASK) + PAGE_SIZE; + } +} diff --git a/arch/powerpc/platforms/iseries/hvlpconfig.c b/arch/powerpc/platforms/iseries/hvlpconfig.c new file mode 100644 index 00000000000..dc28621aea0 --- /dev/null +++ b/arch/powerpc/platforms/iseries/hvlpconfig.c @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2001 Kyle A. Lucke, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <asm/iSeries/HvLpConfig.h> + +HvLpIndex HvLpConfig_getLpIndex_outline(void) +{ + return HvLpConfig_getLpIndex(); +} +EXPORT_SYMBOL(HvLpConfig_getLpIndex_outline); diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c new file mode 100644 index 00000000000..1db26d8be64 --- /dev/null +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * + * Rewrite, cleanup: + * + * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation + * + * Dynamic DMA mapping support, iSeries-specific parts. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/dma-mapping.h> +#include <linux/list.h> + +#include <asm/iommu.h> +#include <asm/tce.h> +#include <asm/machdep.h> +#include <asm/abs_addr.h> +#include <asm/pci-bridge.h> +#include <asm/iSeries/HvCallXm.h> + +extern struct list_head iSeries_Global_Device_List; + + +static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages, + unsigned long uaddr, enum dma_data_direction direction) +{ + u64 rc; + union tce_entry tce; + + while (npages--) { + tce.te_word = 0; + tce.te_bits.tb_rpn = virt_to_abs(uaddr) >> PAGE_SHIFT; + + if (tbl->it_type == TCE_VB) { + /* Virtual Bus */ + tce.te_bits.tb_valid = 1; + tce.te_bits.tb_allio = 1; + if (direction != DMA_TO_DEVICE) + tce.te_bits.tb_rdwr = 1; + } else { + /* PCI Bus */ + tce.te_bits.tb_rdwr = 1; /* Read allowed */ + if (direction != DMA_TO_DEVICE) + tce.te_bits.tb_pciwr = 1; + } + + rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, + tce.te_word); + if (rc) + panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n", + rc); + index++; + uaddr += PAGE_SIZE; + } +} + +static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages) +{ + u64 rc; + + while (npages--) { + rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, 0); + if (rc) + panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n", + rc); + index++; + } +} + +#ifdef CONFIG_PCI +/* + * This function compares the known tables to find an iommu_table + * that has already been built for hardware TCEs. + */ +static struct iommu_table *iommu_table_find(struct iommu_table * tbl) +{ + struct pci_dn *pdn; + + list_for_each_entry(pdn, &iSeries_Global_Device_List, Device_List) { + struct iommu_table *it = pdn->iommu_table; + if ((it != NULL) && + (it->it_type == TCE_PCI) && + (it->it_offset == tbl->it_offset) && + (it->it_index == tbl->it_index) && + (it->it_size == tbl->it_size)) + return it; + } + return NULL; +} + +/* + * Call Hv with the architected data structure to get TCE table info. + * info. Put the returned data into the Linux representation of the + * TCE table data. + * The Hardware Tce table comes in three flavors. + * 1. TCE table shared between Buses. + * 2. TCE table per Bus. + * 3. TCE Table per IOA. + */ +static void iommu_table_getparms(struct pci_dn *pdn, + struct iommu_table* tbl) +{ + struct iommu_table_cb *parms; + + parms = kmalloc(sizeof(*parms), GFP_KERNEL); + if (parms == NULL) + panic("PCI_DMA: TCE Table Allocation failed."); + + memset(parms, 0, sizeof(*parms)); + + parms->itc_busno = pdn->busno; + parms->itc_slotno = pdn->LogicalSlot; + parms->itc_virtbus = 0; + + HvCallXm_getTceTableParms(iseries_hv_addr(parms)); + + if (parms->itc_size == 0) + panic("PCI_DMA: parms->size is zero, parms is 0x%p", parms); + + /* itc_size is in pages worth of table, it_size is in # of entries */ + tbl->it_size = (parms->itc_size * PAGE_SIZE) / sizeof(union tce_entry); + tbl->it_busno = parms->itc_busno; + tbl->it_offset = parms->itc_offset; + tbl->it_index = parms->itc_index; + tbl->it_blocksize = 1; + tbl->it_type = TCE_PCI; + + kfree(parms); +} + + +void iommu_devnode_init_iSeries(struct device_node *dn) +{ + struct iommu_table *tbl; + struct pci_dn *pdn = PCI_DN(dn); + + tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); + + iommu_table_getparms(pdn, tbl); + + /* Look for existing tce table */ + pdn->iommu_table = iommu_table_find(tbl); + if (pdn->iommu_table == NULL) + pdn->iommu_table = iommu_init_table(tbl); + else + kfree(tbl); +} +#endif + +static void iommu_dev_setup_iSeries(struct pci_dev *dev) { } +static void iommu_bus_setup_iSeries(struct pci_bus *bus) { } + +void iommu_init_early_iSeries(void) +{ + ppc_md.tce_build = tce_build_iSeries; + ppc_md.tce_free = tce_free_iSeries; + + ppc_md.iommu_dev_setup = iommu_dev_setup_iSeries; + ppc_md.iommu_bus_setup = iommu_bus_setup_iSeries; + + pci_iommu_init(); +} diff --git a/arch/powerpc/platforms/iseries/ipl_parms.h b/arch/powerpc/platforms/iseries/ipl_parms.h new file mode 100644 index 00000000000..77c135ddbf1 --- /dev/null +++ b/arch/powerpc/platforms/iseries/ipl_parms.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ISERIES_IPL_PARMS_H +#define _ISERIES_IPL_PARMS_H + +/* + * This struct maps the IPL Parameters DMA'd from the SP. + * + * Warning: + * This data must map in exactly 64 bytes and match the architecture for + * the IPL parms + */ + +#include <asm/types.h> + +struct ItIplParmsReal { + u8 xFormat; // Defines format of IplParms x00-x00 + u8 xRsvd01:6; // Reserved x01-x01 + u8 xAlternateSearch:1; // Alternate search indicator ... + u8 xUaSupplied:1; // UA Supplied on programmed IPL... + u8 xLsUaFormat; // Format byte for UA x02-x02 + u8 xRsvd02; // Reserved x03-x03 + u32 xLsUa; // LS UA x04-x07 + u32 xUnusedLsLid; // First OS LID to load x08-x0B + u16 xLsBusNumber; // LS Bus Number x0C-x0D + u8 xLsCardAdr; // LS Card Address x0E-x0E + u8 xLsBoardAdr; // LS Board Address x0F-x0F + u32 xRsvd03; // Reserved x10-x13 + u8 xSpcnPresent:1; // SPCN present x14-x14 + u8 xCpmPresent:1; // CPM present ... + u8 xRsvd04:6; // Reserved ... + u8 xRsvd05:4; // Reserved x15-x15 + u8 xKeyLock:4; // Keylock setting ... + u8 xRsvd06:6; // Reserved x16-x16 + u8 xIplMode:2; // Ipl mode (A|B|C|D) ... + u8 xHwIplType; // Fast v slow v slow EC HW IPL x17-x17 + u16 xCpmEnabledIpl:1; // CPM in effect when IPL initiatedx18-x19 + u16 xPowerOnResetIpl:1; // Indicate POR condition ... + u16 xMainStorePreserved:1; // Main Storage is preserved ... + u16 xRsvd07:13; // Reserved ... + u16 xIplSource:16; // Ipl source x1A-x1B + u8 xIplReason:8; // Reason for this IPL x1C-x1C + u8 xRsvd08; // Reserved x1D-x1D + u16 xRsvd09; // Reserved x1E-x1F + u16 xSysBoxType; // System Box Type x20-x21 + u16 xSysProcType; // System Processor Type x22-x23 + u32 xRsvd10; // Reserved x24-x27 + u64 xRsvd11; // Reserved x28-x2F + u64 xRsvd12; // Reserved x30-x37 + u64 xRsvd13; // Reserved x38-x3F +}; + +extern struct ItIplParmsReal xItIplParmsReal; + +#endif /* _ISERIES_IPL_PARMS_H */ diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c new file mode 100644 index 00000000000..937ac99b9d3 --- /dev/null +++ b/arch/powerpc/platforms/iseries/irq.c @@ -0,0 +1,366 @@ +/* + * This module supports the iSeries PCI bus interrupt handling + * Copyright (C) 20yy <Robert L Holtorf> <IBM Corp> + * Copyright (C) 2004-2005 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + * + * Change Activity: + * Created, December 13, 2000 by Wayne Holm + * End Change Activity + */ +#include <linux/config.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/threads.h> +#include <linux/smp.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/bootmem.h> +#include <linux/ide.h> +#include <linux/irq.h> +#include <linux/spinlock.h> + +#include <asm/ppcdebug.h> +#include <asm/iSeries/HvTypes.h> +#include <asm/iSeries/HvLpEvent.h> +#include <asm/iSeries/HvCallXm.h> + +#include "irq.h" +#include "call_pci.h" + +/* This maps virtual irq numbers to real irqs */ +unsigned int virt_irq_to_real_map[NR_IRQS]; + +/* The next available virtual irq number */ +/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */ +static int next_virtual_irq = 2; + +static long Pci_Interrupt_Count; +static long Pci_Event_Count; + +enum XmPciLpEvent_Subtype { + XmPciLpEvent_BusCreated = 0, // PHB has been created + XmPciLpEvent_BusError = 1, // PHB has failed + XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus + XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed + XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered + XmPciLpEvent_BusRecovered = 12, // PHB has been recovered + XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing + XmPciLpEvent_BridgeError = 21, // Bridge Error + XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt +}; + +struct XmPciLpEvent_BusInterrupt { + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; +}; + +struct XmPciLpEvent_NodeInterrupt { + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; + HvAgentId deviceId; +}; + +struct XmPciLpEvent { + struct HvLpEvent hvLpEvent; + + union { + u64 alignData; // Align on an 8-byte boundary + + struct { + u32 fisr; + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; + HvAgentId deviceId; + } slotInterrupt; + + struct XmPciLpEvent_BusInterrupt busFailed; + struct XmPciLpEvent_BusInterrupt busRecovered; + struct XmPciLpEvent_BusInterrupt busCreated; + + struct XmPciLpEvent_NodeInterrupt nodeFailed; + struct XmPciLpEvent_NodeInterrupt nodeRecovered; + + } eventData; + +}; + +static void intReceived(struct XmPciLpEvent *eventParm, + struct pt_regs *regsParm) +{ + int irq; + + ++Pci_Interrupt_Count; + + switch (eventParm->hvLpEvent.xSubtype) { + case XmPciLpEvent_SlotInterrupt: + irq = eventParm->hvLpEvent.xCorrelationToken; + /* Dispatch the interrupt handlers for this irq */ + ppc_irq_dispatch_handler(regsParm, irq); + HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, + eventParm->eventData.slotInterrupt.subBusNumber, + eventParm->eventData.slotInterrupt.deviceId); + break; + /* Ignore error recovery events for now */ + case XmPciLpEvent_BusCreated: + printk(KERN_INFO "intReceived: system bus %d created\n", + eventParm->eventData.busCreated.busNumber); + break; + case XmPciLpEvent_BusError: + case XmPciLpEvent_BusFailed: + printk(KERN_INFO "intReceived: system bus %d failed\n", + eventParm->eventData.busFailed.busNumber); + break; + case XmPciLpEvent_BusRecovered: + case XmPciLpEvent_UnQuiesceBus: + printk(KERN_INFO "intReceived: system bus %d recovered\n", + eventParm->eventData.busRecovered.busNumber); + break; + case XmPciLpEvent_NodeFailed: + case XmPciLpEvent_BridgeError: + printk(KERN_INFO + "intReceived: multi-adapter bridge %d/%d/%d failed\n", + eventParm->eventData.nodeFailed.busNumber, + eventParm->eventData.nodeFailed.subBusNumber, + eventParm->eventData.nodeFailed.deviceId); + break; + case XmPciLpEvent_NodeRecovered: + printk(KERN_INFO + "intReceived: multi-adapter bridge %d/%d/%d recovered\n", + eventParm->eventData.nodeRecovered.busNumber, + eventParm->eventData.nodeRecovered.subBusNumber, + eventParm->eventData.nodeRecovered.deviceId); + break; + default: + printk(KERN_ERR + "intReceived: unrecognized event subtype 0x%x\n", + eventParm->hvLpEvent.xSubtype); + break; + } +} + +static void XmPciLpEvent_handler(struct HvLpEvent *eventParm, + struct pt_regs *regsParm) +{ +#ifdef CONFIG_PCI + ++Pci_Event_Count; + + if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) { + switch (eventParm->xFlags.xFunction) { + case HvLpEvent_Function_Int: + intReceived((struct XmPciLpEvent *)eventParm, regsParm); + break; + case HvLpEvent_Function_Ack: + printk(KERN_ERR + "XmPciLpEvent_handler: unexpected ack received\n"); + break; + default: + printk(KERN_ERR + "XmPciLpEvent_handler: unexpected event function %d\n", + (int)eventParm->xFlags.xFunction); + break; + } + } else if (eventParm) + printk(KERN_ERR + "XmPciLpEvent_handler: Unrecognized PCI event type 0x%x\n", + (int)eventParm->xType); + else + printk(KERN_ERR "XmPciLpEvent_handler: NULL event received\n"); +#endif +} + +/* + * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c + * It must be called before the bus walk. + */ +void __init iSeries_init_IRQ(void) +{ + /* Register PCI event handler and open an event path */ + int xRc; + + xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, + &XmPciLpEvent_handler); + if (xRc == 0) { + xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); + if (xRc != 0) + printk(KERN_ERR "iSeries_init_IRQ: open event path " + "failed with rc 0x%x\n", xRc); + } else + printk(KERN_ERR "iSeries_init_IRQ: register handler " + "failed with rc 0x%x\n", xRc); +} + +#define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1) +#define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1) +#define REAL_IRQ_TO_FUNC(irq) ((irq) & 7) + +/* + * This will be called by device drivers (via enable_IRQ) + * to enable INTA in the bridge interrupt status register. + */ +static void iSeries_enable_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + /* The IRQ has already been locked by the caller */ + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Unmask secondary INTA */ + mask = 0x80000000; + HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); + PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n", + bus, subBus, deviceId, irq); +} + +/* This is called by iSeries_activate_IRQs */ +static unsigned int iSeries_startup_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Link the IRQ number to the bridge */ + HvCallXm_connectBusUnit(bus, subBus, deviceId, irq); + + /* Unmask bridge interrupts in the FISR */ + mask = 0x01010000 << function; + HvCallPci_unmaskFisr(bus, subBus, deviceId, mask); + iSeries_enable_IRQ(irq); + return 0; +} + +/* + * This is called out of iSeries_fixup to activate interrupt + * generation for usable slots + */ +void __init iSeries_activate_IRQs() +{ + int irq; + unsigned long flags; + + for_each_irq (irq) { + irq_desc_t *desc = get_irq_desc(irq); + + if (desc && desc->handler && desc->handler->startup) { + spin_lock_irqsave(&desc->lock, flags); + desc->handler->startup(irq); + spin_unlock_irqrestore(&desc->lock, flags); + } + } +} + +/* this is not called anywhere currently */ +static void iSeries_shutdown_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + /* irq should be locked by the caller */ + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Invalidate the IRQ number in the bridge */ + HvCallXm_connectBusUnit(bus, subBus, deviceId, 0); + + /* Mask bridge interrupts in the FISR */ + mask = 0x01010000 << function; + HvCallPci_maskFisr(bus, subBus, deviceId, mask); +} + +/* + * This will be called by device drivers (via disable_IRQ) + * to disable INTA in the bridge interrupt status register. + */ +static void iSeries_disable_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + /* The IRQ has already been locked by the caller */ + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Mask secondary INTA */ + mask = 0x80000000; + HvCallPci_maskInterrupts(bus, subBus, deviceId, mask); + PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n", + bus, subBus, deviceId, irq); +} + +/* + * Need to define this so ppc_irq_dispatch_handler will NOT call + * enable_IRQ at the end of interrupt handling. However, this does + * nothing because there is not enough information provided to do + * the EOI HvCall. This is done by XmPciLpEvent.c + */ +static void iSeries_end_IRQ(unsigned int irq) +{ +} + +static hw_irq_controller iSeries_IRQ_handler = { + .typename = "iSeries irq controller", + .startup = iSeries_startup_IRQ, + .shutdown = iSeries_shutdown_IRQ, + .enable = iSeries_enable_IRQ, + .disable = iSeries_disable_IRQ, + .end = iSeries_end_IRQ +}; + +/* + * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot + * It calculates the irq value for the slot. + * Note that subBusNumber is always 0 (at the moment at least). + */ +int __init iSeries_allocate_IRQ(HvBusNumber busNumber, + HvSubBusNumber subBusNumber, HvAgentId deviceId) +{ + unsigned int realirq, virtirq; + u8 idsel = (deviceId >> 4); + u8 function = deviceId & 7; + + virtirq = next_virtual_irq++; + realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; + virt_irq_to_real_map[virtirq] = realirq; + + irq_desc[virtirq].handler = &iSeries_IRQ_handler; + return virtirq; +} + +int virt_irq_create_mapping(unsigned int real_irq) +{ + BUG(); /* Don't call this on iSeries, yet */ + + return 0; +} + +void virt_irq_init(void) +{ + return; +} diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h new file mode 100644 index 00000000000..5f643f16ecc --- /dev/null +++ b/arch/powerpc/platforms/iseries/irq.h @@ -0,0 +1,8 @@ +#ifndef _ISERIES_IRQ_H +#define _ISERIES_IRQ_H + +extern void iSeries_init_IRQ(void); +extern int iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, HvAgentId); +extern void iSeries_activate_IRQs(void); + +#endif /* _ISERIES_IRQ_H */ diff --git a/arch/powerpc/platforms/iseries/ksyms.c b/arch/powerpc/platforms/iseries/ksyms.c new file mode 100644 index 00000000000..f271b353972 --- /dev/null +++ b/arch/powerpc/platforms/iseries/ksyms.c @@ -0,0 +1,27 @@ +/* + * (C) 2001-2005 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/module.h> + +#include <asm/hw_irq.h> +#include <asm/iSeries/HvCallSc.h> + +EXPORT_SYMBOL(HvCall0); +EXPORT_SYMBOL(HvCall1); +EXPORT_SYMBOL(HvCall2); +EXPORT_SYMBOL(HvCall3); +EXPORT_SYMBOL(HvCall4); +EXPORT_SYMBOL(HvCall5); +EXPORT_SYMBOL(HvCall6); +EXPORT_SYMBOL(HvCall7); + +#ifdef CONFIG_SMP +EXPORT_SYMBOL(local_get_flags); +EXPORT_SYMBOL(local_irq_disable); +EXPORT_SYMBOL(local_irq_restore); +#endif diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c new file mode 100644 index 00000000000..ed2ffee6f73 --- /dev/null +++ b/arch/powerpc/platforms/iseries/lpardata.c @@ -0,0 +1,227 @@ +/* + * Copyright 2001 Mike Corrigan, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/threads.h> +#include <linux/module.h> +#include <linux/bitops.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/naca.h> +#include <asm/abs_addr.h> +#include <asm/iSeries/ItLpNaca.h> +#include <asm/lppaca.h> +#include <asm/iSeries/ItLpRegSave.h> +#include <asm/paca.h> +#include <asm/iSeries/LparMap.h> +#include <asm/iSeries/ItExtVpdPanel.h> +#include <asm/iSeries/ItLpQueue.h> + +#include "vpd_areas.h" +#include "spcomm_area.h" +#include "ipl_parms.h" +#include "processor_vpd.h" +#include "release_data.h" + +/* The HvReleaseData is the root of the information shared between + * the hypervisor and Linux. + */ +struct HvReleaseData hvReleaseData = { + .xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */ + .xSize = sizeof(struct HvReleaseData), + .xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas), + .xSlicNacaAddr = &naca, /* 64-bit Naca address */ + .xMsNucDataOffset = LPARMAP_PHYS, + .xFlags = HVREL_TAGSINACTIVE /* tags inactive */ + /* 64 bit */ + /* shared processors */ + /* HMT allowed */ + | 6, /* TEMP: This allows non-GA driver */ + .xVrmIndex = 4, /* We are v5r2m0 */ + .xMinSupportedPlicVrmIndex = 3, /* v5r1m0 */ + .xMinCompatablePlicVrmIndex = 3, /* v5r1m0 */ + .xVrmName = { 0xd3, 0x89, 0x95, 0xa4, /* "Linux 2.4.64" ebcdic */ + 0xa7, 0x40, 0xf2, 0x4b, + 0xf4, 0x4b, 0xf6, 0xf4 }, +}; + +/* + * The NACA. The first dword of the naca is required by the iSeries + * hypervisor to point to itVpdAreas. The hypervisor finds the NACA + * through the pointer in hvReleaseData. + */ +struct naca_struct naca = { + .xItVpdAreas = &itVpdAreas, + .xRamDisk = 0, + .xRamDiskSize = 0, +}; + +extern void system_reset_iSeries(void); +extern void machine_check_iSeries(void); +extern void data_access_iSeries(void); +extern void instruction_access_iSeries(void); +extern void hardware_interrupt_iSeries(void); +extern void alignment_iSeries(void); +extern void program_check_iSeries(void); +extern void fp_unavailable_iSeries(void); +extern void decrementer_iSeries(void); +extern void trap_0a_iSeries(void); +extern void trap_0b_iSeries(void); +extern void system_call_iSeries(void); +extern void single_step_iSeries(void); +extern void trap_0e_iSeries(void); +extern void performance_monitor_iSeries(void); +extern void data_access_slb_iSeries(void); +extern void instruction_access_slb_iSeries(void); + +struct ItLpNaca itLpNaca = { + .xDesc = 0xd397d581, /* "LpNa" ebcdic */ + .xSize = 0x0400, /* size of ItLpNaca */ + .xIntHdlrOffset = 0x0300, /* offset to int array */ + .xMaxIntHdlrEntries = 19, /* # ents */ + .xPrimaryLpIndex = 0, /* Part # of primary */ + .xServiceLpIndex = 0, /* Part # of serv */ + .xLpIndex = 0, /* Part # of me */ + .xMaxLpQueues = 0, /* # of LP queues */ + .xLpQueueOffset = 0x100, /* offset of start of LP queues */ + .xPirEnvironMode = 0, /* Piranha stuff */ + .xPirConsoleMode = 0, + .xPirDasdMode = 0, + .xLparInstalled = 0, + .xSysPartitioned = 0, + .xHwSyncedTBs = 0, + .xIntProcUtilHmt = 0, + .xSpVpdFormat = 0, + .xIntProcRatio = 0, + .xPlicVrmIndex = 0, /* VRM index of PLIC */ + .xMinSupportedSlicVrmInd = 0, /* min supported SLIC */ + .xMinCompatableSlicVrmInd = 0, /* min compat SLIC */ + .xLoadAreaAddr = 0, /* 64-bit addr of load area */ + .xLoadAreaChunks = 0, /* chunks for load area */ + .xPaseSysCallCRMask = 0, /* PASE mask */ + .xSlicSegmentTablePtr = 0, /* seg table */ + .xOldLpQueue = { 0 }, /* Old LP Queue */ + .xInterruptHdlr = { + (u64)system_reset_iSeries, /* 0x100 System Reset */ + (u64)machine_check_iSeries, /* 0x200 Machine Check */ + (u64)data_access_iSeries, /* 0x300 Data Access */ + (u64)instruction_access_iSeries, /* 0x400 Instruction Access */ + (u64)hardware_interrupt_iSeries, /* 0x500 External */ + (u64)alignment_iSeries, /* 0x600 Alignment */ + (u64)program_check_iSeries, /* 0x700 Program Check */ + (u64)fp_unavailable_iSeries, /* 0x800 FP Unavailable */ + (u64)decrementer_iSeries, /* 0x900 Decrementer */ + (u64)trap_0a_iSeries, /* 0xa00 Trap 0A */ + (u64)trap_0b_iSeries, /* 0xb00 Trap 0B */ + (u64)system_call_iSeries, /* 0xc00 System Call */ + (u64)single_step_iSeries, /* 0xd00 Single Step */ + (u64)trap_0e_iSeries, /* 0xe00 Trap 0E */ + (u64)performance_monitor_iSeries,/* 0xf00 Performance Monitor */ + 0, /* int 0x1000 */ + 0, /* int 0x1010 */ + 0, /* int 0x1020 CPU ctls */ + (u64)hardware_interrupt_iSeries, /* SC Ret Hdlr */ + (u64)data_access_slb_iSeries, /* 0x380 D-SLB */ + (u64)instruction_access_slb_iSeries /* 0x480 I-SLB */ + } +}; +EXPORT_SYMBOL(itLpNaca); + +/* May be filled in by the hypervisor so cannot end up in the BSS */ +struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data"))); + +/* May be filled in by the hypervisor so cannot end up in the BSS */ +struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data"))); +EXPORT_SYMBOL(xItExtVpdPanel); + +#define maxPhysicalProcessors 32 + +struct IoHriProcessorVpd xIoHriProcessorVpd[maxPhysicalProcessors] = { + { + .xInstCacheOperandSize = 32, + .xDataCacheOperandSize = 32, + .xProcFreq = 50000000, + .xTimeBaseFreq = 50000000, + .xPVR = 0x3600 + } +}; + +/* Space for Main Store Vpd 27,200 bytes */ +/* May be filled in by the hypervisor so cannot end up in the BSS */ +u64 xMsVpd[3400] __attribute__((__section__(".data"))); + +/* Space for Recovery Log Buffer */ +/* May be filled in by the hypervisor so cannot end up in the BSS */ +u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data"))); + +struct SpCommArea xSpCommArea = { + .xDesc = 0xE2D7C3C2, + .xFormat = 1, +}; + +/* The LparMap data is now located at offset 0x6000 in head.S + * It was put there so that the HvReleaseData could address it + * with a 32-bit offset as required by the iSeries hypervisor + * + * The Naca has a pointer to the ItVpdAreas. The hypervisor finds + * the Naca via the HvReleaseData area. The HvReleaseData has the + * offset into the Naca of the pointer to the ItVpdAreas. + */ +struct ItVpdAreas itVpdAreas = { + .xSlicDesc = 0xc9a3e5c1, /* "ItVA" */ + .xSlicSize = sizeof(struct ItVpdAreas), + .xSlicVpdEntries = ItVpdMaxEntries, /* # VPD array entries */ + .xSlicDmaEntries = ItDmaMaxEntries, /* # DMA array entries */ + .xSlicMaxLogicalProcs = NR_CPUS * 2, /* Max logical procs */ + .xSlicMaxPhysicalProcs = maxPhysicalProcessors, /* Max physical procs */ + .xSlicDmaToksOffset = offsetof(struct ItVpdAreas, xPlicDmaToks), + .xSlicVpdAdrsOffset = offsetof(struct ItVpdAreas, xSlicVpdAdrs), + .xSlicDmaLensOffset = offsetof(struct ItVpdAreas, xPlicDmaLens), + .xSlicVpdLensOffset = offsetof(struct ItVpdAreas, xSlicVpdLens), + .xSlicMaxSlotLabels = 0, /* max slot labels */ + .xSlicMaxLpQueues = 1, /* max LP queues */ + .xPlicDmaLens = { 0 }, /* DMA lengths */ + .xPlicDmaToks = { 0 }, /* DMA tokens */ + .xSlicVpdLens = { /* VPD lengths */ + 0,0,0, /* 0 - 2 */ + sizeof(xItExtVpdPanel), /* 3 Extended VPD */ + sizeof(struct paca_struct), /* 4 length of Paca */ + 0, /* 5 */ + sizeof(struct ItIplParmsReal),/* 6 length of IPL parms */ + 26992, /* 7 length of MS VPD */ + 0, /* 8 */ + sizeof(struct ItLpNaca),/* 9 length of LP Naca */ + 0, /* 10 */ + 256, /* 11 length of Recovery Log Buf */ + sizeof(struct SpCommArea), /* 12 length of SP Comm Area */ + 0,0,0, /* 13 - 15 */ + sizeof(struct IoHriProcessorVpd),/* 16 length of Proc Vpd */ + 0,0,0,0,0,0, /* 17 - 22 */ + sizeof(struct hvlpevent_queue), /* 23 length of Lp Queue */ + 0,0 /* 24 - 25 */ + }, + .xSlicVpdAdrs = { /* VPD addresses */ + 0,0,0, /* 0 - 2 */ + &xItExtVpdPanel, /* 3 Extended VPD */ + &paca[0], /* 4 first Paca */ + 0, /* 5 */ + &xItIplParmsReal, /* 6 IPL parms */ + &xMsVpd, /* 7 MS Vpd */ + 0, /* 8 */ + &itLpNaca, /* 9 LpNaca */ + 0, /* 10 */ + &xRecoveryLogBuffer, /* 11 Recovery Log Buffer */ + &xSpCommArea, /* 12 SP Comm Area */ + 0,0,0, /* 13 - 15 */ + &xIoHriProcessorVpd, /* 16 Proc Vpd */ + 0,0,0,0,0,0, /* 17 - 22 */ + &hvlpevent_queue, /* 23 Lp Queue */ + 0,0 + } +}; diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c new file mode 100644 index 00000000000..54c7753dbe0 --- /dev/null +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -0,0 +1,325 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/bootmem.h> +#include <linux/seq_file.h> +#include <linux/proc_fs.h> +#include <linux/module.h> + +#include <asm/system.h> +#include <asm/paca.h> +#include <asm/iSeries/ItLpQueue.h> +#include <asm/iSeries/HvLpEvent.h> +#include <asm/iSeries/HvCallEvent.h> +#include <asm/iSeries/ItLpNaca.h> + +/* + * The LpQueue is used to pass event data from the hypervisor to + * the partition. This is where I/O interrupt events are communicated. + * + * It is written to by the hypervisor so cannot end up in the BSS. + */ +struct hvlpevent_queue hvlpevent_queue __attribute__((__section__(".data"))); + +DEFINE_PER_CPU(unsigned long[HvLpEvent_Type_NumTypes], hvlpevent_counts); + +static char *event_types[HvLpEvent_Type_NumTypes] = { + "Hypervisor", + "Machine Facilities", + "Session Manager", + "SPD I/O", + "Virtual Bus", + "PCI I/O", + "RIO I/O", + "Virtual Lan", + "Virtual I/O" +}; + +/* Array of LpEvent handler functions */ +static LpEventHandler lpEventHandler[HvLpEvent_Type_NumTypes]; +static unsigned lpEventHandlerPaths[HvLpEvent_Type_NumTypes]; + +static struct HvLpEvent * get_next_hvlpevent(void) +{ + struct HvLpEvent * event; + event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr; + + if (event->xFlags.xValid) { + /* rmb() needed only for weakly consistent machines (regatta) */ + rmb(); + /* Set pointer to next potential event */ + hvlpevent_queue.xSlicCurEventPtr += ((event->xSizeMinus1 + + LpEventAlign) / LpEventAlign) * LpEventAlign; + + /* Wrap to beginning if no room at end */ + if (hvlpevent_queue.xSlicCurEventPtr > + hvlpevent_queue.xSlicLastValidEventPtr) { + hvlpevent_queue.xSlicCurEventPtr = + hvlpevent_queue.xSlicEventStackPtr; + } + } else { + event = NULL; + } + + return event; +} + +static unsigned long spread_lpevents = NR_CPUS; + +int hvlpevent_is_pending(void) +{ + struct HvLpEvent *next_event; + + if (smp_processor_id() >= spread_lpevents) + return 0; + + next_event = (struct HvLpEvent *)hvlpevent_queue.xSlicCurEventPtr; + + return next_event->xFlags.xValid | + hvlpevent_queue.xPlicOverflowIntPending; +} + +static void hvlpevent_clear_valid(struct HvLpEvent * event) +{ + /* Tell the Hypervisor that we're done with this event. + * Also clear bits within this event that might look like valid bits. + * ie. on 64-byte boundaries. + */ + struct HvLpEvent *tmp; + unsigned extra = ((event->xSizeMinus1 + LpEventAlign) / + LpEventAlign) - 1; + + switch (extra) { + case 3: + tmp = (struct HvLpEvent*)((char*)event + 3 * LpEventAlign); + tmp->xFlags.xValid = 0; + case 2: + tmp = (struct HvLpEvent*)((char*)event + 2 * LpEventAlign); + tmp->xFlags.xValid = 0; + case 1: + tmp = (struct HvLpEvent*)((char*)event + 1 * LpEventAlign); + tmp->xFlags.xValid = 0; + } + + mb(); + + event->xFlags.xValid = 0; +} + +void process_hvlpevents(struct pt_regs *regs) +{ + struct HvLpEvent * event; + + /* If we have recursed, just return */ + if (!spin_trylock(&hvlpevent_queue.lock)) + return; + + for (;;) { + event = get_next_hvlpevent(); + if (event) { + /* Call appropriate handler here, passing + * a pointer to the LpEvent. The handler + * must make a copy of the LpEvent if it + * needs it in a bottom half. (perhaps for + * an ACK) + * + * Handlers are responsible for ACK processing + * + * The Hypervisor guarantees that LpEvents will + * only be delivered with types that we have + * registered for, so no type check is necessary + * here! + */ + if (event->xType < HvLpEvent_Type_NumTypes) + __get_cpu_var(hvlpevent_counts)[event->xType]++; + if (event->xType < HvLpEvent_Type_NumTypes && + lpEventHandler[event->xType]) + lpEventHandler[event->xType](event, regs); + else + printk(KERN_INFO "Unexpected Lp Event type=%d\n", event->xType ); + + hvlpevent_clear_valid(event); + } else if (hvlpevent_queue.xPlicOverflowIntPending) + /* + * No more valid events. If overflow events are + * pending process them + */ + HvCallEvent_getOverflowLpEvents(hvlpevent_queue.xIndex); + else + break; + } + + spin_unlock(&hvlpevent_queue.lock); +} + +static int set_spread_lpevents(char *str) +{ + unsigned long val = simple_strtoul(str, NULL, 0); + + /* + * The parameter is the number of processors to share in processing + * lp events. + */ + if (( val > 0) && (val <= NR_CPUS)) { + spread_lpevents = val; + printk("lpevent processing spread over %ld processors\n", val); + } else { + printk("invalid spread_lpevents %ld\n", val); + } + + return 1; +} +__setup("spread_lpevents=", set_spread_lpevents); + +void setup_hvlpevent_queue(void) +{ + void *eventStack; + + /* Allocate a page for the Event Stack. */ + eventStack = alloc_bootmem_pages(LpEventStackSize); + memset(eventStack, 0, LpEventStackSize); + + /* Invoke the hypervisor to initialize the event stack */ + HvCallEvent_setLpEventStack(0, eventStack, LpEventStackSize); + + hvlpevent_queue.xSlicEventStackPtr = (char *)eventStack; + hvlpevent_queue.xSlicCurEventPtr = (char *)eventStack; + hvlpevent_queue.xSlicLastValidEventPtr = (char *)eventStack + + (LpEventStackSize - LpEventMaxSize); + hvlpevent_queue.xIndex = 0; +} + +/* Register a handler for an LpEvent type */ +int HvLpEvent_registerHandler(HvLpEvent_Type eventType, LpEventHandler handler) +{ + if (eventType < HvLpEvent_Type_NumTypes) { + lpEventHandler[eventType] = handler; + return 0; + } + return 1; +} +EXPORT_SYMBOL(HvLpEvent_registerHandler); + +int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType) +{ + might_sleep(); + + if (eventType < HvLpEvent_Type_NumTypes) { + if (!lpEventHandlerPaths[eventType]) { + lpEventHandler[eventType] = NULL; + /* + * We now sleep until all other CPUs have scheduled. + * This ensures that the deletion is seen by all + * other CPUs, and that the deleted handler isn't + * still running on another CPU when we return. + */ + synchronize_rcu(); + return 0; + } + } + return 1; +} +EXPORT_SYMBOL(HvLpEvent_unregisterHandler); + +/* + * lpIndex is the partition index of the target partition. + * needed only for VirtualIo, VirtualLan and SessionMgr. Zero + * indicates to use our partition index - for the other types. + */ +int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex) +{ + if ((eventType < HvLpEvent_Type_NumTypes) && + lpEventHandler[eventType]) { + if (lpIndex == 0) + lpIndex = itLpNaca.xLpIndex; + HvCallEvent_openLpEventPath(lpIndex, eventType); + ++lpEventHandlerPaths[eventType]; + return 0; + } + return 1; +} + +int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex) +{ + if ((eventType < HvLpEvent_Type_NumTypes) && + lpEventHandler[eventType] && + lpEventHandlerPaths[eventType]) { + if (lpIndex == 0) + lpIndex = itLpNaca.xLpIndex; + HvCallEvent_closeLpEventPath(lpIndex, eventType); + --lpEventHandlerPaths[eventType]; + return 0; + } + return 1; +} + +static int proc_lpevents_show(struct seq_file *m, void *v) +{ + int cpu, i; + unsigned long sum; + static unsigned long cpu_totals[NR_CPUS]; + + /* FIXME: do we care that there's no locking here? */ + sum = 0; + for_each_online_cpu(cpu) { + cpu_totals[cpu] = 0; + for (i = 0; i < HvLpEvent_Type_NumTypes; i++) { + cpu_totals[cpu] += per_cpu(hvlpevent_counts, cpu)[i]; + } + sum += cpu_totals[cpu]; + } + + seq_printf(m, "LpEventQueue 0\n"); + seq_printf(m, " events processed:\t%lu\n", sum); + + for (i = 0; i < HvLpEvent_Type_NumTypes; ++i) { + sum = 0; + for_each_online_cpu(cpu) { + sum += per_cpu(hvlpevent_counts, cpu)[i]; + } + + seq_printf(m, " %-20s %10lu\n", event_types[i], sum); + } + + seq_printf(m, "\n events processed by processor:\n"); + + for_each_online_cpu(cpu) { + seq_printf(m, " CPU%02d %10lu\n", cpu, cpu_totals[cpu]); + } + + return 0; +} + +static int proc_lpevents_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_lpevents_show, NULL); +} + +static struct file_operations proc_lpevents_operations = { + .open = proc_lpevents_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init proc_lpevents_init(void) +{ + struct proc_dir_entry *e; + + e = create_proc_entry("iSeries/lpevents", S_IFREG|S_IRUGO, NULL); + if (e) + e->proc_fops = &proc_lpevents_operations; + + return 0; +} +__initcall(proc_lpevents_init); + diff --git a/arch/powerpc/platforms/iseries/main_store.h b/arch/powerpc/platforms/iseries/main_store.h new file mode 100644 index 00000000000..74f6889f834 --- /dev/null +++ b/arch/powerpc/platforms/iseries/main_store.h @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ISERIES_MAIN_STORE_H +#define _ISERIES_MAIN_STORE_H + +/* Main Store Vpd for Condor,iStar,sStar */ +struct IoHriMainStoreSegment4 { + u8 msArea0Exists:1; + u8 msArea1Exists:1; + u8 msArea2Exists:1; + u8 msArea3Exists:1; + u8 reserved1:4; + u8 reserved2; + + u8 msArea0Functional:1; + u8 msArea1Functional:1; + u8 msArea2Functional:1; + u8 msArea3Functional:1; + u8 reserved3:4; + u8 reserved4; + + u32 totalMainStore; + + u64 msArea0Ptr; + u64 msArea1Ptr; + u64 msArea2Ptr; + u64 msArea3Ptr; + + u32 cardProductionLevel; + + u32 msAdrHole; + + u8 msArea0HasRiserVpd:1; + u8 msArea1HasRiserVpd:1; + u8 msArea2HasRiserVpd:1; + u8 msArea3HasRiserVpd:1; + u8 reserved5:4; + u8 reserved6; + u16 reserved7; + + u8 reserved8[28]; + + u64 nonInterleavedBlocksStartAdr; + u64 nonInterleavedBlocksEndAdr; +}; + +/* Main Store VPD for Power4 */ +struct IoHriMainStoreChipInfo1 { + u32 chipMfgID __attribute((packed)); + char chipECLevel[4] __attribute((packed)); +}; + +struct IoHriMainStoreVpdIdData { + char typeNumber[4]; + char modelNumber[4]; + char partNumber[12]; + char serialNumber[12]; +}; + +struct IoHriMainStoreVpdFruData { + char fruLabel[8] __attribute((packed)); + u8 numberOfSlots __attribute((packed)); + u8 pluggingType __attribute((packed)); + u16 slotMapIndex __attribute((packed)); +}; + +struct IoHriMainStoreAdrRangeBlock { + void *blockStart __attribute((packed)); + void *blockEnd __attribute((packed)); + u32 blockProcChipId __attribute((packed)); +}; + +#define MaxAreaAdrRangeBlocks 4 + +struct IoHriMainStoreArea4 { + u32 msVpdFormat __attribute((packed)); + u8 containedVpdType __attribute((packed)); + u8 reserved1 __attribute((packed)); + u16 reserved2 __attribute((packed)); + + u64 msExists __attribute((packed)); + u64 msFunctional __attribute((packed)); + + u32 memorySize __attribute((packed)); + u32 procNodeId __attribute((packed)); + + u32 numAdrRangeBlocks __attribute((packed)); + struct IoHriMainStoreAdrRangeBlock xAdrRangeBlock[MaxAreaAdrRangeBlocks] __attribute((packed)); + + struct IoHriMainStoreChipInfo1 chipInfo0 __attribute((packed)); + struct IoHriMainStoreChipInfo1 chipInfo1 __attribute((packed)); + struct IoHriMainStoreChipInfo1 chipInfo2 __attribute((packed)); + struct IoHriMainStoreChipInfo1 chipInfo3 __attribute((packed)); + struct IoHriMainStoreChipInfo1 chipInfo4 __attribute((packed)); + struct IoHriMainStoreChipInfo1 chipInfo5 __attribute((packed)); + struct IoHriMainStoreChipInfo1 chipInfo6 __attribute((packed)); + struct IoHriMainStoreChipInfo1 chipInfo7 __attribute((packed)); + + void *msRamAreaArray __attribute((packed)); + u32 msRamAreaArrayNumEntries __attribute((packed)); + u32 msRamAreaArrayEntrySize __attribute((packed)); + + u32 numaDimmExists __attribute((packed)); + u32 numaDimmFunctional __attribute((packed)); + void *numaDimmArray __attribute((packed)); + u32 numaDimmArrayNumEntries __attribute((packed)); + u32 numaDimmArrayEntrySize __attribute((packed)); + + struct IoHriMainStoreVpdIdData idData __attribute((packed)); + + u64 powerData __attribute((packed)); + u64 cardAssemblyPartNum __attribute((packed)); + u64 chipSerialNum __attribute((packed)); + + u64 reserved3 __attribute((packed)); + char reserved4[16] __attribute((packed)); + + struct IoHriMainStoreVpdFruData fruData __attribute((packed)); + + u8 vpdPortNum __attribute((packed)); + u8 reserved5 __attribute((packed)); + u8 frameId __attribute((packed)); + u8 rackUnit __attribute((packed)); + char asciiKeywordVpd[256] __attribute((packed)); + u32 reserved6 __attribute((packed)); +}; + + +struct IoHriMainStoreSegment5 { + u16 reserved1; + u8 reserved2; + u8 msVpdFormat; + + u32 totalMainStore; + u64 maxConfiguredMsAdr; + + struct IoHriMainStoreArea4 *msAreaArray; + u32 msAreaArrayNumEntries; + u32 msAreaArrayEntrySize; + + u32 msAreaExists; + u32 msAreaFunctional; + + u64 reserved3; +}; + +extern u64 xMsVpd[]; + +#endif /* _ISERIES_MAIN_STORE_H */ diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c new file mode 100644 index 00000000000..e5de31aa001 --- /dev/null +++ b/arch/powerpc/platforms/iseries/mf.c @@ -0,0 +1,1321 @@ +/* + * Copyright (C) 2001 Troy D. Armstrong IBM Corporation + * Copyright (C) 2004-2005 Stephen Rothwell IBM Corporation + * + * This modules exists as an interface between a Linux secondary partition + * running on an iSeries and the primary partition's Virtual Service + * Processor (VSP) object. The VSP has final authority over powering on/off + * all partitions in the iSeries. It also provides miscellaneous low-level + * machine facility type operations. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/bcd.h> +#include <linux/rtc.h> + +#include <asm/time.h> +#include <asm/uaccess.h> +#include <asm/paca.h> +#include <asm/abs_addr.h> +#include <asm/iSeries/vio.h> +#include <asm/iSeries/mf.h> +#include <asm/iSeries/HvLpConfig.h> +#include <asm/iSeries/ItLpQueue.h> + +#include "setup.h" + +extern int piranha_simulator; + +/* + * This is the structure layout for the Machine Facilites LPAR event + * flows. + */ +struct vsp_cmd_data { + u64 token; + u16 cmd; + HvLpIndex lp_index; + u8 result_code; + u32 reserved; + union { + u64 state; /* GetStateOut */ + u64 ipl_type; /* GetIplTypeOut, Function02SelectIplTypeIn */ + u64 ipl_mode; /* GetIplModeOut, Function02SelectIplModeIn */ + u64 page[4]; /* GetSrcHistoryIn */ + u64 flag; /* GetAutoIplWhenPrimaryIplsOut, + SetAutoIplWhenPrimaryIplsIn, + WhiteButtonPowerOffIn, + Function08FastPowerOffIn, + IsSpcnRackPowerIncompleteOut */ + struct { + u64 token; + u64 address_type; + u64 side; + u32 length; + u32 offset; + } kern; /* SetKernelImageIn, GetKernelImageIn, + SetKernelCmdLineIn, GetKernelCmdLineIn */ + u32 length_out; /* GetKernelImageOut, GetKernelCmdLineOut */ + u8 reserved[80]; + } sub_data; +}; + +struct vsp_rsp_data { + struct completion com; + struct vsp_cmd_data *response; +}; + +struct alloc_data { + u16 size; + u16 type; + u32 count; + u16 reserved1; + u8 reserved2; + HvLpIndex target_lp; +}; + +struct ce_msg_data; + +typedef void (*ce_msg_comp_hdlr)(void *token, struct ce_msg_data *vsp_cmd_rsp); + +struct ce_msg_comp_data { + ce_msg_comp_hdlr handler; + void *token; +}; + +struct ce_msg_data { + u8 ce_msg[12]; + char reserved[4]; + struct ce_msg_comp_data *completion; +}; + +struct io_mf_lp_event { + struct HvLpEvent hp_lp_event; + u16 subtype_result_code; + u16 reserved1; + u32 reserved2; + union { + struct alloc_data alloc; + struct ce_msg_data ce_msg; + struct vsp_cmd_data vsp_cmd; + } data; +}; + +#define subtype_data(a, b, c, d) \ + (((a) << 24) + ((b) << 16) + ((c) << 8) + (d)) + +/* + * All outgoing event traffic is kept on a FIFO queue. The first + * pointer points to the one that is outstanding, and all new + * requests get stuck on the end. Also, we keep a certain number of + * preallocated pending events so that we can operate very early in + * the boot up sequence (before kmalloc is ready). + */ +struct pending_event { + struct pending_event *next; + struct io_mf_lp_event event; + MFCompleteHandler hdlr; + char dma_data[72]; + unsigned dma_data_length; + unsigned remote_address; +}; +static spinlock_t pending_event_spinlock; +static struct pending_event *pending_event_head; +static struct pending_event *pending_event_tail; +static struct pending_event *pending_event_avail; +static struct pending_event pending_event_prealloc[16]; + +/* + * Put a pending event onto the available queue, so it can get reused. + * Attention! You must have the pending_event_spinlock before calling! + */ +static void free_pending_event(struct pending_event *ev) +{ + if (ev != NULL) { + ev->next = pending_event_avail; + pending_event_avail = ev; + } +} + +/* + * Enqueue the outbound event onto the stack. If the queue was + * empty to begin with, we must also issue it via the Hypervisor + * interface. There is a section of code below that will touch + * the first stack pointer without the protection of the pending_event_spinlock. + * This is OK, because we know that nobody else will be modifying + * the first pointer when we do this. + */ +static int signal_event(struct pending_event *ev) +{ + int rc = 0; + unsigned long flags; + int go = 1; + struct pending_event *ev1; + HvLpEvent_Rc hv_rc; + + /* enqueue the event */ + if (ev != NULL) { + ev->next = NULL; + spin_lock_irqsave(&pending_event_spinlock, flags); + if (pending_event_head == NULL) + pending_event_head = ev; + else { + go = 0; + pending_event_tail->next = ev; + } + pending_event_tail = ev; + spin_unlock_irqrestore(&pending_event_spinlock, flags); + } + + /* send the event */ + while (go) { + go = 0; + + /* any DMA data to send beforehand? */ + if (pending_event_head->dma_data_length > 0) + HvCallEvent_dmaToSp(pending_event_head->dma_data, + pending_event_head->remote_address, + pending_event_head->dma_data_length, + HvLpDma_Direction_LocalToRemote); + + hv_rc = HvCallEvent_signalLpEvent( + &pending_event_head->event.hp_lp_event); + if (hv_rc != HvLpEvent_Rc_Good) { + printk(KERN_ERR "mf.c: HvCallEvent_signalLpEvent() " + "failed with %d\n", (int)hv_rc); + + spin_lock_irqsave(&pending_event_spinlock, flags); + ev1 = pending_event_head; + pending_event_head = pending_event_head->next; + if (pending_event_head != NULL) + go = 1; + spin_unlock_irqrestore(&pending_event_spinlock, flags); + + if (ev1 == ev) + rc = -EIO; + else if (ev1->hdlr != NULL) + (*ev1->hdlr)((void *)ev1->event.hp_lp_event.xCorrelationToken, -EIO); + + spin_lock_irqsave(&pending_event_spinlock, flags); + free_pending_event(ev1); + spin_unlock_irqrestore(&pending_event_spinlock, flags); + } + } + + return rc; +} + +/* + * Allocate a new pending_event structure, and initialize it. + */ +static struct pending_event *new_pending_event(void) +{ + struct pending_event *ev = NULL; + HvLpIndex primary_lp = HvLpConfig_getPrimaryLpIndex(); + unsigned long flags; + struct HvLpEvent *hev; + + spin_lock_irqsave(&pending_event_spinlock, flags); + if (pending_event_avail != NULL) { + ev = pending_event_avail; + pending_event_avail = pending_event_avail->next; + } + spin_unlock_irqrestore(&pending_event_spinlock, flags); + if (ev == NULL) { + ev = kmalloc(sizeof(struct pending_event), GFP_ATOMIC); + if (ev == NULL) { + printk(KERN_ERR "mf.c: unable to kmalloc %ld bytes\n", + sizeof(struct pending_event)); + return NULL; + } + } + memset(ev, 0, sizeof(struct pending_event)); + hev = &ev->event.hp_lp_event; + hev->xFlags.xValid = 1; + hev->xFlags.xAckType = HvLpEvent_AckType_ImmediateAck; + hev->xFlags.xAckInd = HvLpEvent_AckInd_DoAck; + hev->xFlags.xFunction = HvLpEvent_Function_Int; + hev->xType = HvLpEvent_Type_MachineFac; + hev->xSourceLp = HvLpConfig_getLpIndex(); + hev->xTargetLp = primary_lp; + hev->xSizeMinus1 = sizeof(ev->event) - 1; + hev->xRc = HvLpEvent_Rc_Good; + hev->xSourceInstanceId = HvCallEvent_getSourceLpInstanceId(primary_lp, + HvLpEvent_Type_MachineFac); + hev->xTargetInstanceId = HvCallEvent_getTargetLpInstanceId(primary_lp, + HvLpEvent_Type_MachineFac); + + return ev; +} + +static int signal_vsp_instruction(struct vsp_cmd_data *vsp_cmd) +{ + struct pending_event *ev = new_pending_event(); + int rc; + struct vsp_rsp_data response; + + if (ev == NULL) + return -ENOMEM; + + init_completion(&response.com); + response.response = vsp_cmd; + ev->event.hp_lp_event.xSubtype = 6; + ev->event.hp_lp_event.x.xSubtypeData = + subtype_data('M', 'F', 'V', 'I'); + ev->event.data.vsp_cmd.token = (u64)&response; + ev->event.data.vsp_cmd.cmd = vsp_cmd->cmd; + ev->event.data.vsp_cmd.lp_index = HvLpConfig_getLpIndex(); + ev->event.data.vsp_cmd.result_code = 0xFF; + ev->event.data.vsp_cmd.reserved = 0; + memcpy(&(ev->event.data.vsp_cmd.sub_data), + &(vsp_cmd->sub_data), sizeof(vsp_cmd->sub_data)); + mb(); + + rc = signal_event(ev); + if (rc == 0) + wait_for_completion(&response.com); + return rc; +} + + +/* + * Send a 12-byte CE message to the primary partition VSP object + */ +static int signal_ce_msg(char *ce_msg, struct ce_msg_comp_data *completion) +{ + struct pending_event *ev = new_pending_event(); + + if (ev == NULL) + return -ENOMEM; + + ev->event.hp_lp_event.xSubtype = 0; + ev->event.hp_lp_event.x.xSubtypeData = + subtype_data('M', 'F', 'C', 'E'); + memcpy(ev->event.data.ce_msg.ce_msg, ce_msg, 12); + ev->event.data.ce_msg.completion = completion; + return signal_event(ev); +} + +/* + * Send a 12-byte CE message (with no data) to the primary partition VSP object + */ +static int signal_ce_msg_simple(u8 ce_op, struct ce_msg_comp_data *completion) +{ + u8 ce_msg[12]; + + memset(ce_msg, 0, sizeof(ce_msg)); + ce_msg[3] = ce_op; + return signal_ce_msg(ce_msg, completion); +} + +/* + * Send a 12-byte CE message and DMA data to the primary partition VSP object + */ +static int dma_and_signal_ce_msg(char *ce_msg, + struct ce_msg_comp_data *completion, void *dma_data, + unsigned dma_data_length, unsigned remote_address) +{ + struct pending_event *ev = new_pending_event(); + + if (ev == NULL) + return -ENOMEM; + + ev->event.hp_lp_event.xSubtype = 0; + ev->event.hp_lp_event.x.xSubtypeData = + subtype_data('M', 'F', 'C', 'E'); + memcpy(ev->event.data.ce_msg.ce_msg, ce_msg, 12); + ev->event.data.ce_msg.completion = completion; + memcpy(ev->dma_data, dma_data, dma_data_length); + ev->dma_data_length = dma_data_length; + ev->remote_address = remote_address; + return signal_event(ev); +} + +/* + * Initiate a nice (hopefully) shutdown of Linux. We simply are + * going to try and send the init process a SIGINT signal. If + * this fails (why?), we'll simply force it off in a not-so-nice + * manner. + */ +static int shutdown(void) +{ + int rc = kill_proc(1, SIGINT, 1); + + if (rc) { + printk(KERN_ALERT "mf.c: SIGINT to init failed (%d), " + "hard shutdown commencing\n", rc); + mf_power_off(); + } else + printk(KERN_INFO "mf.c: init has been successfully notified " + "to proceed with shutdown\n"); + return rc; +} + +/* + * The primary partition VSP object is sending us a new + * event flow. Handle it... + */ +static void handle_int(struct io_mf_lp_event *event) +{ + struct ce_msg_data *ce_msg_data; + struct ce_msg_data *pce_msg_data; + unsigned long flags; + struct pending_event *pev; + + /* ack the interrupt */ + event->hp_lp_event.xRc = HvLpEvent_Rc_Good; + HvCallEvent_ackLpEvent(&event->hp_lp_event); + + /* process interrupt */ + switch (event->hp_lp_event.xSubtype) { + case 0: /* CE message */ + ce_msg_data = &event->data.ce_msg; + switch (ce_msg_data->ce_msg[3]) { + case 0x5B: /* power control notification */ + if ((ce_msg_data->ce_msg[5] & 0x20) != 0) { + printk(KERN_INFO "mf.c: Commencing partition shutdown\n"); + if (shutdown() == 0) + signal_ce_msg_simple(0xDB, NULL); + } + break; + case 0xC0: /* get time */ + spin_lock_irqsave(&pending_event_spinlock, flags); + pev = pending_event_head; + if (pev != NULL) + pending_event_head = pending_event_head->next; + spin_unlock_irqrestore(&pending_event_spinlock, flags); + if (pev == NULL) + break; + pce_msg_data = &pev->event.data.ce_msg; + if (pce_msg_data->ce_msg[3] != 0x40) + break; + if (pce_msg_data->completion != NULL) { + ce_msg_comp_hdlr handler = + pce_msg_data->completion->handler; + void *token = pce_msg_data->completion->token; + + if (handler != NULL) + (*handler)(token, ce_msg_data); + } + spin_lock_irqsave(&pending_event_spinlock, flags); + free_pending_event(pev); + spin_unlock_irqrestore(&pending_event_spinlock, flags); + /* send next waiting event */ + if (pending_event_head != NULL) + signal_event(NULL); + break; + } + break; + case 1: /* IT sys shutdown */ + printk(KERN_INFO "mf.c: Commencing system shutdown\n"); + shutdown(); + break; + } +} + +/* + * The primary partition VSP object is acknowledging the receipt + * of a flow we sent to them. If there are other flows queued + * up, we must send another one now... + */ +static void handle_ack(struct io_mf_lp_event *event) +{ + unsigned long flags; + struct pending_event *two = NULL; + unsigned long free_it = 0; + struct ce_msg_data *ce_msg_data; + struct ce_msg_data *pce_msg_data; + struct vsp_rsp_data *rsp; + + /* handle current event */ + if (pending_event_head == NULL) { + printk(KERN_ERR "mf.c: stack empty for receiving ack\n"); + return; + } + + switch (event->hp_lp_event.xSubtype) { + case 0: /* CE msg */ + ce_msg_data = &event->data.ce_msg; + if (ce_msg_data->ce_msg[3] != 0x40) { + free_it = 1; + break; + } + if (ce_msg_data->ce_msg[2] == 0) + break; + free_it = 1; + pce_msg_data = &pending_event_head->event.data.ce_msg; + if (pce_msg_data->completion != NULL) { + ce_msg_comp_hdlr handler = + pce_msg_data->completion->handler; + void *token = pce_msg_data->completion->token; + + if (handler != NULL) + (*handler)(token, ce_msg_data); + } + break; + case 4: /* allocate */ + case 5: /* deallocate */ + if (pending_event_head->hdlr != NULL) + (*pending_event_head->hdlr)((void *)event->hp_lp_event.xCorrelationToken, event->data.alloc.count); + free_it = 1; + break; + case 6: + free_it = 1; + rsp = (struct vsp_rsp_data *)event->data.vsp_cmd.token; + if (rsp == NULL) { + printk(KERN_ERR "mf.c: no rsp\n"); + break; + } + if (rsp->response != NULL) + memcpy(rsp->response, &event->data.vsp_cmd, + sizeof(event->data.vsp_cmd)); + complete(&rsp->com); + break; + } + + /* remove from queue */ + spin_lock_irqsave(&pending_event_spinlock, flags); + if ((pending_event_head != NULL) && (free_it == 1)) { + struct pending_event *oldHead = pending_event_head; + + pending_event_head = pending_event_head->next; + two = pending_event_head; + free_pending_event(oldHead); + } + spin_unlock_irqrestore(&pending_event_spinlock, flags); + + /* send next waiting event */ + if (two != NULL) + signal_event(NULL); +} + +/* + * This is the generic event handler we are registering with + * the Hypervisor. Ensure the flows are for us, and then + * parse it enough to know if it is an interrupt or an + * acknowledge. + */ +static void hv_handler(struct HvLpEvent *event, struct pt_regs *regs) +{ + if ((event != NULL) && (event->xType == HvLpEvent_Type_MachineFac)) { + switch(event->xFlags.xFunction) { + case HvLpEvent_Function_Ack: + handle_ack((struct io_mf_lp_event *)event); + break; + case HvLpEvent_Function_Int: + handle_int((struct io_mf_lp_event *)event); + break; + default: + printk(KERN_ERR "mf.c: non ack/int event received\n"); + break; + } + } else + printk(KERN_ERR "mf.c: alien event received\n"); +} + +/* + * Global kernel interface to allocate and seed events into the + * Hypervisor. + */ +void mf_allocate_lp_events(HvLpIndex target_lp, HvLpEvent_Type type, + unsigned size, unsigned count, MFCompleteHandler hdlr, + void *user_token) +{ + struct pending_event *ev = new_pending_event(); + int rc; + + if (ev == NULL) { + rc = -ENOMEM; + } else { + ev->event.hp_lp_event.xSubtype = 4; + ev->event.hp_lp_event.xCorrelationToken = (u64)user_token; + ev->event.hp_lp_event.x.xSubtypeData = + subtype_data('M', 'F', 'M', 'A'); + ev->event.data.alloc.target_lp = target_lp; + ev->event.data.alloc.type = type; + ev->event.data.alloc.size = size; + ev->event.data.alloc.count = count; + ev->hdlr = hdlr; + rc = signal_event(ev); + } + if ((rc != 0) && (hdlr != NULL)) + (*hdlr)(user_token, rc); +} +EXPORT_SYMBOL(mf_allocate_lp_events); + +/* + * Global kernel interface to unseed and deallocate events already in + * Hypervisor. + */ +void mf_deallocate_lp_events(HvLpIndex target_lp, HvLpEvent_Type type, + unsigned count, MFCompleteHandler hdlr, void *user_token) +{ + struct pending_event *ev = new_pending_event(); + int rc; + + if (ev == NULL) + rc = -ENOMEM; + else { + ev->event.hp_lp_event.xSubtype = 5; + ev->event.hp_lp_event.xCorrelationToken = (u64)user_token; + ev->event.hp_lp_event.x.xSubtypeData = + subtype_data('M', 'F', 'M', 'D'); + ev->event.data.alloc.target_lp = target_lp; + ev->event.data.alloc.type = type; + ev->event.data.alloc.count = count; + ev->hdlr = hdlr; + rc = signal_event(ev); + } + if ((rc != 0) && (hdlr != NULL)) + (*hdlr)(user_token, rc); +} +EXPORT_SYMBOL(mf_deallocate_lp_events); + +/* + * Global kernel interface to tell the VSP object in the primary + * partition to power this partition off. + */ +void mf_power_off(void) +{ + printk(KERN_INFO "mf.c: Down it goes...\n"); + signal_ce_msg_simple(0x4d, NULL); + for (;;) + ; +} + +/* + * Global kernel interface to tell the VSP object in the primary + * partition to reboot this partition. + */ +void mf_reboot(void) +{ + printk(KERN_INFO "mf.c: Preparing to bounce...\n"); + signal_ce_msg_simple(0x4e, NULL); + for (;;) + ; +} + +/* + * Display a single word SRC onto the VSP control panel. + */ +void mf_display_src(u32 word) +{ + u8 ce[12]; + + memset(ce, 0, sizeof(ce)); + ce[3] = 0x4a; + ce[7] = 0x01; + ce[8] = word >> 24; + ce[9] = word >> 16; + ce[10] = word >> 8; + ce[11] = word; + signal_ce_msg(ce, NULL); +} + +/* + * Display a single word SRC of the form "PROGXXXX" on the VSP control panel. + */ +void mf_display_progress(u16 value) +{ + u8 ce[12]; + u8 src[72]; + + memcpy(ce, "\x00\x00\x04\x4A\x00\x00\x00\x48\x00\x00\x00\x00", 12); + memcpy(src, "\x01\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" + "\x00\x00\x00\x00PROGxxxx ", + 72); + src[6] = value >> 8; + src[7] = value & 255; + src[44] = "0123456789ABCDEF"[(value >> 12) & 15]; + src[45] = "0123456789ABCDEF"[(value >> 8) & 15]; + src[46] = "0123456789ABCDEF"[(value >> 4) & 15]; + src[47] = "0123456789ABCDEF"[value & 15]; + dma_and_signal_ce_msg(ce, NULL, src, sizeof(src), 9 * 64 * 1024); +} + +/* + * Clear the VSP control panel. Used to "erase" an SRC that was + * previously displayed. + */ +void mf_clear_src(void) +{ + signal_ce_msg_simple(0x4b, NULL); +} + +/* + * Initialization code here. + */ +void mf_init(void) +{ + int i; + + /* initialize */ + spin_lock_init(&pending_event_spinlock); + for (i = 0; + i < sizeof(pending_event_prealloc) / sizeof(*pending_event_prealloc); + ++i) + free_pending_event(&pending_event_prealloc[i]); + HvLpEvent_registerHandler(HvLpEvent_Type_MachineFac, &hv_handler); + + /* virtual continue ack */ + signal_ce_msg_simple(0x57, NULL); + + /* initialization complete */ + printk(KERN_NOTICE "mf.c: iSeries Linux LPAR Machine Facilities " + "initialized\n"); +} + +struct rtc_time_data { + struct completion com; + struct ce_msg_data ce_msg; + int rc; +}; + +static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) +{ + struct rtc_time_data *rtc = token; + + memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg)); + rtc->rc = 0; + complete(&rtc->com); +} + +static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) +{ + tm->tm_wday = 0; + tm->tm_yday = 0; + tm->tm_isdst = 0; + if (rc) { + tm->tm_sec = 0; + tm->tm_min = 0; + tm->tm_hour = 0; + tm->tm_mday = 15; + tm->tm_mon = 5; + tm->tm_year = 52; + return rc; + } + + if ((ce_msg[2] == 0xa9) || + (ce_msg[2] == 0xaf)) { + /* TOD clock is not set */ + tm->tm_sec = 1; + tm->tm_min = 1; + tm->tm_hour = 1; + tm->tm_mday = 10; + tm->tm_mon = 8; + tm->tm_year = 71; + mf_set_rtc(tm); + } + { + u8 year = ce_msg[5]; + u8 sec = ce_msg[6]; + u8 min = ce_msg[7]; + u8 hour = ce_msg[8]; + u8 day = ce_msg[10]; + u8 mon = ce_msg[11]; + + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); + BCD_TO_BIN(day); + BCD_TO_BIN(mon); + BCD_TO_BIN(year); + + if (year <= 69) + year += 100; + + tm->tm_sec = sec; + tm->tm_min = min; + tm->tm_hour = hour; + tm->tm_mday = day; + tm->tm_mon = mon; + tm->tm_year = year; + } + + return 0; +} + +int mf_get_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + init_completion(&rtc_data.com); + ce_complete.handler = &get_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + wait_for_completion(&rtc_data.com); + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + +struct boot_rtc_time_data { + int busy; + struct ce_msg_data ce_msg; + int rc; +}; + +static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) +{ + struct boot_rtc_time_data *rtc = token; + + memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg)); + rtc->rc = 0; + rtc->busy = 0; +} + +int mf_get_boot_rtc(struct rtc_time *tm) +{ + struct ce_msg_comp_data ce_complete; + struct boot_rtc_time_data rtc_data; + int rc; + + memset(&ce_complete, 0, sizeof(ce_complete)); + memset(&rtc_data, 0, sizeof(rtc_data)); + rtc_data.busy = 1; + ce_complete.handler = &get_boot_rtc_time_complete; + ce_complete.token = &rtc_data; + rc = signal_ce_msg_simple(0x40, &ce_complete); + if (rc) + return rc; + /* We need to poll here as we are not yet taking interrupts */ + while (rtc_data.busy) { + if (hvlpevent_is_pending()) + process_hvlpevents(NULL); + } + return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); +} + +int mf_set_rtc(struct rtc_time *tm) +{ + char ce_time[12]; + u8 day, mon, hour, min, sec, y1, y2; + unsigned year; + + year = 1900 + tm->tm_year; + y1 = year / 100; + y2 = year % 100; + + sec = tm->tm_sec; + min = tm->tm_min; + hour = tm->tm_hour; + day = tm->tm_mday; + mon = tm->tm_mon + 1; + + BIN_TO_BCD(sec); + BIN_TO_BCD(min); + BIN_TO_BCD(hour); + BIN_TO_BCD(mon); + BIN_TO_BCD(day); + BIN_TO_BCD(y1); + BIN_TO_BCD(y2); + + memset(ce_time, 0, sizeof(ce_time)); + ce_time[3] = 0x41; + ce_time[4] = y1; + ce_time[5] = y2; + ce_time[6] = sec; + ce_time[7] = min; + ce_time[8] = hour; + ce_time[10] = day; + ce_time[11] = mon; + + return signal_ce_msg(ce_time, NULL); +} + +#ifdef CONFIG_PROC_FS + +static int proc_mf_dump_cmdline(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + char *p; + struct vsp_cmd_data vsp_cmd; + int rc; + dma_addr_t dma_addr; + + /* The HV appears to return no more than 256 bytes of command line */ + if (off >= 256) + return 0; + if ((off + count) > 256) + count = 256 - off; + + dma_addr = dma_map_single(iSeries_vio_dev, page, off + count, + DMA_FROM_DEVICE); + if (dma_mapping_error(dma_addr)) + return -ENOMEM; + memset(page, 0, off + count); + memset(&vsp_cmd, 0, sizeof(vsp_cmd)); + vsp_cmd.cmd = 33; + vsp_cmd.sub_data.kern.token = dma_addr; + vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; + vsp_cmd.sub_data.kern.side = (u64)data; + vsp_cmd.sub_data.kern.length = off + count; + mb(); + rc = signal_vsp_instruction(&vsp_cmd); + dma_unmap_single(iSeries_vio_dev, dma_addr, off + count, + DMA_FROM_DEVICE); + if (rc) + return rc; + if (vsp_cmd.result_code != 0) + return -ENOMEM; + p = page; + len = 0; + while (len < (off + count)) { + if ((*p == '\0') || (*p == '\n')) { + if (*p == '\0') + *p = '\n'; + p++; + len++; + *eof = 1; + break; + } + p++; + len++; + } + + if (len < off) { + *eof = 1; + len = 0; + } + return len; +} + +#if 0 +static int mf_getVmlinuxChunk(char *buffer, int *size, int offset, u64 side) +{ + struct vsp_cmd_data vsp_cmd; + int rc; + int len = *size; + dma_addr_t dma_addr; + + dma_addr = dma_map_single(iSeries_vio_dev, buffer, len, + DMA_FROM_DEVICE); + memset(buffer, 0, len); + memset(&vsp_cmd, 0, sizeof(vsp_cmd)); + vsp_cmd.cmd = 32; + vsp_cmd.sub_data.kern.token = dma_addr; + vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; + vsp_cmd.sub_data.kern.side = side; + vsp_cmd.sub_data.kern.offset = offset; + vsp_cmd.sub_data.kern.length = len; + mb(); + rc = signal_vsp_instruction(&vsp_cmd); + if (rc == 0) { + if (vsp_cmd.result_code == 0) + *size = vsp_cmd.sub_data.length_out; + else + rc = -ENOMEM; + } + + dma_unmap_single(iSeries_vio_dev, dma_addr, len, DMA_FROM_DEVICE); + + return rc; +} + +static int proc_mf_dump_vmlinux(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int sizeToGet = count; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (mf_getVmlinuxChunk(page, &sizeToGet, off, (u64)data) == 0) { + if (sizeToGet != 0) { + *start = page + off; + return sizeToGet; + } + *eof = 1; + return 0; + } + *eof = 1; + return 0; +} +#endif + +static int proc_mf_dump_side(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + char mf_current_side = ' '; + struct vsp_cmd_data vsp_cmd; + + memset(&vsp_cmd, 0, sizeof(vsp_cmd)); + vsp_cmd.cmd = 2; + vsp_cmd.sub_data.ipl_type = 0; + mb(); + + if (signal_vsp_instruction(&vsp_cmd) == 0) { + if (vsp_cmd.result_code == 0) { + switch (vsp_cmd.sub_data.ipl_type) { + case 0: mf_current_side = 'A'; + break; + case 1: mf_current_side = 'B'; + break; + case 2: mf_current_side = 'C'; + break; + default: mf_current_side = 'D'; + break; + } + } + } + + len = sprintf(page, "%c\n", mf_current_side); + + if (len <= (off + count)) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + return len; +} + +static int proc_mf_change_side(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + char side; + u64 newSide; + struct vsp_cmd_data vsp_cmd; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (count == 0) + return 0; + + if (get_user(side, buffer)) + return -EFAULT; + + switch (side) { + case 'A': newSide = 0; + break; + case 'B': newSide = 1; + break; + case 'C': newSide = 2; + break; + case 'D': newSide = 3; + break; + default: + printk(KERN_ERR "mf_proc.c: proc_mf_change_side: invalid side\n"); + return -EINVAL; + } + + memset(&vsp_cmd, 0, sizeof(vsp_cmd)); + vsp_cmd.sub_data.ipl_type = newSide; + vsp_cmd.cmd = 10; + + (void)signal_vsp_instruction(&vsp_cmd); + + return count; +} + +#if 0 +static void mf_getSrcHistory(char *buffer, int size) +{ + struct IplTypeReturnStuff return_stuff; + struct pending_event *ev = new_pending_event(); + int rc = 0; + char *pages[4]; + + pages[0] = kmalloc(4096, GFP_ATOMIC); + pages[1] = kmalloc(4096, GFP_ATOMIC); + pages[2] = kmalloc(4096, GFP_ATOMIC); + pages[3] = kmalloc(4096, GFP_ATOMIC); + if ((ev == NULL) || (pages[0] == NULL) || (pages[1] == NULL) + || (pages[2] == NULL) || (pages[3] == NULL)) + return -ENOMEM; + + return_stuff.xType = 0; + return_stuff.xRc = 0; + return_stuff.xDone = 0; + ev->event.hp_lp_event.xSubtype = 6; + ev->event.hp_lp_event.x.xSubtypeData = + subtype_data('M', 'F', 'V', 'I'); + ev->event.data.vsp_cmd.xEvent = &return_stuff; + ev->event.data.vsp_cmd.cmd = 4; + ev->event.data.vsp_cmd.lp_index = HvLpConfig_getLpIndex(); + ev->event.data.vsp_cmd.result_code = 0xFF; + ev->event.data.vsp_cmd.reserved = 0; + ev->event.data.vsp_cmd.sub_data.page[0] = iseries_hv_addr(pages[0]); + ev->event.data.vsp_cmd.sub_data.page[1] = iseries_hv_addr(pages[1]); + ev->event.data.vsp_cmd.sub_data.page[2] = iseries_hv_addr(pages[2]); + ev->event.data.vsp_cmd.sub_data.page[3] = iseries_hv_addr(pages[3]); + mb(); + if (signal_event(ev) != 0) + return; + + while (return_stuff.xDone != 1) + udelay(10); + if (return_stuff.xRc == 0) + memcpy(buffer, pages[0], size); + kfree(pages[0]); + kfree(pages[1]); + kfree(pages[2]); + kfree(pages[3]); +} +#endif + +static int proc_mf_dump_src(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ +#if 0 + int len; + + mf_getSrcHistory(page, count); + len = count; + len -= off; + if (len < count) { + *eof = 1; + if (len <= 0) + return 0; + } else + len = count; + *start = page + off; + return len; +#else + return 0; +#endif +} + +static int proc_mf_change_src(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + char stkbuf[10]; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if ((count < 4) && (count != 1)) { + printk(KERN_ERR "mf_proc: invalid src\n"); + return -EINVAL; + } + + if (count > (sizeof(stkbuf) - 1)) + count = sizeof(stkbuf) - 1; + if (copy_from_user(stkbuf, buffer, count)) + return -EFAULT; + + if ((count == 1) && (*stkbuf == '\0')) + mf_clear_src(); + else + mf_display_src(*(u32 *)stkbuf); + + return count; +} + +static int proc_mf_change_cmdline(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + struct vsp_cmd_data vsp_cmd; + dma_addr_t dma_addr; + char *page; + int ret = -EACCES; + + if (!capable(CAP_SYS_ADMIN)) + goto out; + + dma_addr = 0; + page = dma_alloc_coherent(iSeries_vio_dev, count, &dma_addr, + GFP_ATOMIC); + ret = -ENOMEM; + if (page == NULL) + goto out; + + ret = -EFAULT; + if (copy_from_user(page, buffer, count)) + goto out_free; + + memset(&vsp_cmd, 0, sizeof(vsp_cmd)); + vsp_cmd.cmd = 31; + vsp_cmd.sub_data.kern.token = dma_addr; + vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; + vsp_cmd.sub_data.kern.side = (u64)data; + vsp_cmd.sub_data.kern.length = count; + mb(); + (void)signal_vsp_instruction(&vsp_cmd); + ret = count; + +out_free: + dma_free_coherent(iSeries_vio_dev, count, page, dma_addr); +out: + return ret; +} + +static ssize_t proc_mf_change_vmlinux(struct file *file, + const char __user *buf, + size_t count, loff_t *ppos) +{ + struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); + ssize_t rc; + dma_addr_t dma_addr; + char *page; + struct vsp_cmd_data vsp_cmd; + + rc = -EACCES; + if (!capable(CAP_SYS_ADMIN)) + goto out; + + dma_addr = 0; + page = dma_alloc_coherent(iSeries_vio_dev, count, &dma_addr, + GFP_ATOMIC); + rc = -ENOMEM; + if (page == NULL) { + printk(KERN_ERR "mf.c: couldn't allocate memory to set vmlinux chunk\n"); + goto out; + } + rc = -EFAULT; + if (copy_from_user(page, buf, count)) + goto out_free; + + memset(&vsp_cmd, 0, sizeof(vsp_cmd)); + vsp_cmd.cmd = 30; + vsp_cmd.sub_data.kern.token = dma_addr; + vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; + vsp_cmd.sub_data.kern.side = (u64)dp->data; + vsp_cmd.sub_data.kern.offset = *ppos; + vsp_cmd.sub_data.kern.length = count; + mb(); + rc = signal_vsp_instruction(&vsp_cmd); + if (rc) + goto out_free; + rc = -ENOMEM; + if (vsp_cmd.result_code != 0) + goto out_free; + + *ppos += count; + rc = count; +out_free: + dma_free_coherent(iSeries_vio_dev, count, page, dma_addr); +out: + return rc; +} + +static struct file_operations proc_vmlinux_operations = { + .write = proc_mf_change_vmlinux, +}; + +static int __init mf_proc_init(void) +{ + struct proc_dir_entry *mf_proc_root; + struct proc_dir_entry *ent; + struct proc_dir_entry *mf; + char name[2]; + int i; + + mf_proc_root = proc_mkdir("iSeries/mf", NULL); + if (!mf_proc_root) + return 1; + + name[1] = '\0'; + for (i = 0; i < 4; i++) { + name[0] = 'A' + i; + mf = proc_mkdir(name, mf_proc_root); + if (!mf) + return 1; + + ent = create_proc_entry("cmdline", S_IFREG|S_IRUSR|S_IWUSR, mf); + if (!ent) + return 1; + ent->nlink = 1; + ent->data = (void *)(long)i; + ent->read_proc = proc_mf_dump_cmdline; + ent->write_proc = proc_mf_change_cmdline; + + if (i == 3) /* no vmlinux entry for 'D' */ + continue; + + ent = create_proc_entry("vmlinux", S_IFREG|S_IWUSR, mf); + if (!ent) + return 1; + ent->nlink = 1; + ent->data = (void *)(long)i; + ent->proc_fops = &proc_vmlinux_operations; + } + + ent = create_proc_entry("side", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root); + if (!ent) + return 1; + ent->nlink = 1; + ent->data = (void *)0; + ent->read_proc = proc_mf_dump_side; + ent->write_proc = proc_mf_change_side; + + ent = create_proc_entry("src", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root); + if (!ent) + return 1; + ent->nlink = 1; + ent->data = (void *)0; + ent->read_proc = proc_mf_dump_src; + ent->write_proc = proc_mf_change_src; + + return 0; +} + +__initcall(mf_proc_init); + +#endif /* CONFIG_PROC_FS */ + +/* + * Get the RTC from the virtual service processor + * This requires flowing LpEvents to the primary partition + */ +void iSeries_get_rtc_time(struct rtc_time *rtc_tm) +{ + if (piranha_simulator) + return; + + mf_get_rtc(rtc_tm); + rtc_tm->tm_mon--; +} + +/* + * Set the RTC in the virtual service processor + * This requires flowing LpEvents to the primary partition + */ +int iSeries_set_rtc_time(struct rtc_time *tm) +{ + mf_set_rtc(tm); + return 0; +} + +unsigned long iSeries_get_boot_time(void) +{ + struct rtc_time tm; + + if (piranha_simulator) + return 0; + + mf_get_boot_rtc(&tm); + return mktime(tm.tm_year + 1900, tm.tm_mon, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); +} diff --git a/arch/powerpc/platforms/iseries/misc.S b/arch/powerpc/platforms/iseries/misc.S new file mode 100644 index 00000000000..09f14522e17 --- /dev/null +++ b/arch/powerpc/platforms/iseries/misc.S @@ -0,0 +1,55 @@ +/* + * This file contains miscellaneous low-level functions. + * Copyright (C) 1995-2005 IBM Corp + * + * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) + * and Paul Mackerras. + * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) + * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/processor.h> +#include <asm/asm-offsets.h> + + .text + +/* unsigned long local_save_flags(void) */ +_GLOBAL(local_get_flags) + lbz r3,PACAPROCENABLED(r13) + blr + +/* unsigned long local_irq_disable(void) */ +_GLOBAL(local_irq_disable) + lbz r3,PACAPROCENABLED(r13) + li r4,0 + stb r4,PACAPROCENABLED(r13) + blr /* Done */ + +/* void local_irq_restore(unsigned long flags) */ +_GLOBAL(local_irq_restore) + lbz r5,PACAPROCENABLED(r13) + /* Check if things are setup the way we want _already_. */ + cmpw 0,r3,r5 + beqlr + /* are we enabling interrupts? */ + cmpdi 0,r3,0 + stb r3,PACAPROCENABLED(r13) + beqlr + /* Check pending interrupts */ + /* A decrementer, IPI or PMC interrupt may have occurred + * while we were in the hypervisor (which enables) */ + ld r4,PACALPPACA+LPPACAANYINT(r13) + cmpdi r4,0 + beqlr + + /* + * Handle pending interrupts in interrupt context + */ + li r0,0x5555 + sc + blr diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c new file mode 100644 index 00000000000..959e59fd9c1 --- /dev/null +++ b/arch/powerpc/platforms/iseries/pci.c @@ -0,0 +1,906 @@ +/* + * Copyright (C) 2001 Allan Trautman, IBM Corporation + * + * iSeries specific routines for PCI. + * + * Based on code from pci.c and iSeries_pci.c 32bit + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/ide.h> +#include <linux/pci.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/ppcdebug.h> +#include <asm/iommu.h> +#include <asm/abs_addr.h> + +#include <asm/iSeries/HvCallXm.h> +#include <asm/iSeries/mf.h> + +#include <asm/ppc-pci.h> + +#include "irq.h" +#include "pci.h" +#include "call_pci.h" + +extern unsigned long io_page_mask; + +/* + * Forward declares of prototypes. + */ +static struct device_node *find_Device_Node(int bus, int devfn); +static void scan_PHB_slots(struct pci_controller *Phb); +static void scan_EADS_bridge(HvBusNumber Bus, HvSubBusNumber SubBus, int IdSel); +static int scan_bridge_slot(HvBusNumber Bus, struct HvCallPci_BridgeInfo *Info); + +LIST_HEAD(iSeries_Global_Device_List); + +static int DeviceCount; + +/* Counters and control flags. */ +static long Pci_Io_Read_Count; +static long Pci_Io_Write_Count; +#if 0 +static long Pci_Cfg_Read_Count; +static long Pci_Cfg_Write_Count; +#endif +static long Pci_Error_Count; + +static int Pci_Retry_Max = 3; /* Only retry 3 times */ +static int Pci_Error_Flag = 1; /* Set Retry Error on. */ + +static struct pci_ops iSeries_pci_ops; + +/* + * Table defines + * Each Entry size is 4 MB * 1024 Entries = 4GB I/O address space. + */ +#define IOMM_TABLE_MAX_ENTRIES 1024 +#define IOMM_TABLE_ENTRY_SIZE 0x0000000000400000UL +#define BASE_IO_MEMORY 0xE000000000000000UL + +static unsigned long max_io_memory = 0xE000000000000000UL; +static long current_iomm_table_entry; + +/* + * Lookup Tables. + */ +static struct device_node **iomm_table; +static u8 *iobar_table; + +/* + * Static and Global variables + */ +static char *pci_io_text = "iSeries PCI I/O"; +static DEFINE_SPINLOCK(iomm_table_lock); + +/* + * iomm_table_initialize + * + * Allocates and initalizes the Address Translation Table and Bar + * Tables to get them ready for use. Must be called before any + * I/O space is handed out to the device BARs. + */ +static void iomm_table_initialize(void) +{ + spin_lock(&iomm_table_lock); + iomm_table = kmalloc(sizeof(*iomm_table) * IOMM_TABLE_MAX_ENTRIES, + GFP_KERNEL); + iobar_table = kmalloc(sizeof(*iobar_table) * IOMM_TABLE_MAX_ENTRIES, + GFP_KERNEL); + spin_unlock(&iomm_table_lock); + if ((iomm_table == NULL) || (iobar_table == NULL)) + panic("PCI: I/O tables allocation failed.\n"); +} + +/* + * iomm_table_allocate_entry + * + * Adds pci_dev entry in address translation table + * + * - Allocates the number of entries required in table base on BAR + * size. + * - Allocates starting at BASE_IO_MEMORY and increases. + * - The size is round up to be a multiple of entry size. + * - CurrentIndex is incremented to keep track of the last entry. + * - Builds the resource entry for allocated BARs. + */ +static void iomm_table_allocate_entry(struct pci_dev *dev, int bar_num) +{ + struct resource *bar_res = &dev->resource[bar_num]; + long bar_size = pci_resource_len(dev, bar_num); + + /* + * No space to allocate, quick exit, skip Allocation. + */ + if (bar_size == 0) + return; + /* + * Set Resource values. + */ + spin_lock(&iomm_table_lock); + bar_res->name = pci_io_text; + bar_res->start = + IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry; + bar_res->start += BASE_IO_MEMORY; + bar_res->end = bar_res->start + bar_size - 1; + /* + * Allocate the number of table entries needed for BAR. + */ + while (bar_size > 0 ) { + iomm_table[current_iomm_table_entry] = dev->sysdata; + iobar_table[current_iomm_table_entry] = bar_num; + bar_size -= IOMM_TABLE_ENTRY_SIZE; + ++current_iomm_table_entry; + } + max_io_memory = BASE_IO_MEMORY + + (IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry); + spin_unlock(&iomm_table_lock); +} + +/* + * allocate_device_bars + * + * - Allocates ALL pci_dev BAR's and updates the resources with the + * BAR value. BARS with zero length will have the resources + * The HvCallPci_getBarParms is used to get the size of the BAR + * space. It calls iomm_table_allocate_entry to allocate + * each entry. + * - Loops through The Bar resources(0 - 5) including the ROM + * is resource(6). + */ +static void allocate_device_bars(struct pci_dev *dev) +{ + struct resource *bar_res; + int bar_num; + + for (bar_num = 0; bar_num <= PCI_ROM_RESOURCE; ++bar_num) { + bar_res = &dev->resource[bar_num]; + iomm_table_allocate_entry(dev, bar_num); + } +} + +/* + * Log error information to system console. + * Filter out the device not there errors. + * PCI: EADs Connect Failed 0x18.58.10 Rc: 0x00xx + * PCI: Read Vendor Failed 0x18.58.10 Rc: 0x00xx + * PCI: Connect Bus Unit Failed 0x18.58.10 Rc: 0x00xx + */ +static void pci_Log_Error(char *Error_Text, int Bus, int SubBus, + int AgentId, int HvRc) +{ + if (HvRc == 0x0302) + return; + printk(KERN_ERR "PCI: %s Failed: 0x%02X.%02X.%02X Rc: 0x%04X", + Error_Text, Bus, SubBus, AgentId, HvRc); +} + +/* + * build_device_node(u16 Bus, int SubBus, u8 DevFn) + */ +static struct device_node *build_device_node(HvBusNumber Bus, + HvSubBusNumber SubBus, int AgentId, int Function) +{ + struct device_node *node; + struct pci_dn *pdn; + + PPCDBG(PPCDBG_BUSWALK, + "-build_device_node 0x%02X.%02X.%02X Function: %02X\n", + Bus, SubBus, AgentId, Function); + + node = kmalloc(sizeof(struct device_node), GFP_KERNEL); + if (node == NULL) + return NULL; + memset(node, 0, sizeof(struct device_node)); + pdn = kzalloc(sizeof(*pdn), GFP_KERNEL); + if (pdn == NULL) { + kfree(node); + return NULL; + } + node->data = pdn; + pdn->node = node; + list_add_tail(&pdn->Device_List, &iSeries_Global_Device_List); + pdn->busno = Bus; + pdn->bussubno = SubBus; + pdn->devfn = PCI_DEVFN(ISERIES_ENCODE_DEVICE(AgentId), Function); + return node; +} + +/* + * unsigned long __init find_and_init_phbs(void) + * + * Description: + * This function checks for all possible system PCI host bridges that connect + * PCI buses. The system hypervisor is queried as to the guest partition + * ownership status. A pci_controller is built for any bus which is partially + * owned or fully owned by this guest partition. + */ +unsigned long __init find_and_init_phbs(void) +{ + struct pci_controller *phb; + HvBusNumber bus; + + PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n"); + + /* Check all possible buses. */ + for (bus = 0; bus < 256; bus++) { + int ret = HvCallXm_testBus(bus); + if (ret == 0) { + printk("bus %d appears to exist\n", bus); + + phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL); + if (phb == NULL) + return -ENOMEM; + pci_setup_pci_controller(phb); + + phb->pci_mem_offset = phb->local_number = bus; + phb->first_busno = bus; + phb->last_busno = bus; + phb->ops = &iSeries_pci_ops; + + PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n", + phb, bus); + + /* Find and connect the devices. */ + scan_PHB_slots(phb); + } + /* + * Check for Unexpected Return code, a clue that something + * has gone wrong. + */ + else if (ret != 0x0301) + printk(KERN_ERR "Unexpected Return on Probe(0x%04X): 0x%04X", + bus, ret); + } + return 0; +} + +/* + * iSeries_pcibios_init + * + * Chance to initialize and structures or variable before PCI Bus walk. + */ +void iSeries_pcibios_init(void) +{ + PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n"); + iomm_table_initialize(); + find_and_init_phbs(); + io_page_mask = -1; + PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n"); +} + +/* + * iSeries_pci_final_fixup(void) + */ +void __init iSeries_pci_final_fixup(void) +{ + struct pci_dev *pdev = NULL; + struct device_node *node; + int DeviceCount = 0; + + PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n"); + + /* Fix up at the device node and pci_dev relationship */ + mf_display_src(0xC9000100); + + printk("pcibios_final_fixup\n"); + for_each_pci_dev(pdev) { + node = find_Device_Node(pdev->bus->number, pdev->devfn); + printk("pci dev %p (%x.%x), node %p\n", pdev, + pdev->bus->number, pdev->devfn, node); + + if (node != NULL) { + ++DeviceCount; + pdev->sysdata = (void *)node; + PCI_DN(node)->pcidev = pdev; + PPCDBG(PPCDBG_BUSWALK, + "pdev 0x%p <==> DevNode 0x%p\n", + pdev, node); + allocate_device_bars(pdev); + iSeries_Device_Information(pdev, DeviceCount); + iommu_devnode_init_iSeries(node); + } else + printk("PCI: Device Tree not found for 0x%016lX\n", + (unsigned long)pdev); + pdev->irq = PCI_DN(node)->Irq; + } + iSeries_activate_IRQs(); + mf_display_src(0xC9000200); +} + +void pcibios_fixup_bus(struct pci_bus *PciBus) +{ + PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n", + PciBus->number); +} + +void pcibios_fixup_resources(struct pci_dev *pdev) +{ + PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev); +} + +/* + * Loop through each node function to find usable EADs bridges. + */ +static void scan_PHB_slots(struct pci_controller *Phb) +{ + struct HvCallPci_DeviceInfo *DevInfo; + HvBusNumber bus = Phb->local_number; /* System Bus */ + const HvSubBusNumber SubBus = 0; /* EADs is always 0. */ + int HvRc = 0; + int IdSel; + const int MaxAgents = 8; + + DevInfo = (struct HvCallPci_DeviceInfo*) + kmalloc(sizeof(struct HvCallPci_DeviceInfo), GFP_KERNEL); + if (DevInfo == NULL) + return; + + /* + * Probe for EADs Bridges + */ + for (IdSel = 1; IdSel < MaxAgents; ++IdSel) { + HvRc = HvCallPci_getDeviceInfo(bus, SubBus, IdSel, + iseries_hv_addr(DevInfo), + sizeof(struct HvCallPci_DeviceInfo)); + if (HvRc == 0) { + if (DevInfo->deviceType == HvCallPci_NodeDevice) + scan_EADS_bridge(bus, SubBus, IdSel); + else + printk("PCI: Invalid System Configuration(0x%02X)" + " for bus 0x%02x id 0x%02x.\n", + DevInfo->deviceType, bus, IdSel); + } + else + pci_Log_Error("getDeviceInfo", bus, SubBus, IdSel, HvRc); + } + kfree(DevInfo); +} + +static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus, + int IdSel) +{ + struct HvCallPci_BridgeInfo *BridgeInfo; + HvAgentId AgentId; + int Function; + int HvRc; + + BridgeInfo = (struct HvCallPci_BridgeInfo *) + kmalloc(sizeof(struct HvCallPci_BridgeInfo), GFP_KERNEL); + if (BridgeInfo == NULL) + return; + + /* Note: hvSubBus and irq is always be 0 at this level! */ + for (Function = 0; Function < 8; ++Function) { + AgentId = ISERIES_PCI_AGENTID(IdSel, Function); + HvRc = HvCallXm_connectBusUnit(bus, SubBus, AgentId, 0); + if (HvRc == 0) { + printk("found device at bus %d idsel %d func %d (AgentId %x)\n", + bus, IdSel, Function, AgentId); + /* Connect EADs: 0x18.00.12 = 0x00 */ + PPCDBG(PPCDBG_BUSWALK, + "PCI:Connect EADs: 0x%02X.%02X.%02X\n", + bus, SubBus, AgentId); + HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId, + iseries_hv_addr(BridgeInfo), + sizeof(struct HvCallPci_BridgeInfo)); + if (HvRc == 0) { + printk("bridge info: type %x subbus %x maxAgents %x maxsubbus %x logslot %x\n", + BridgeInfo->busUnitInfo.deviceType, + BridgeInfo->subBusNumber, + BridgeInfo->maxAgents, + BridgeInfo->maxSubBusNumber, + BridgeInfo->logicalSlotNumber); + PPCDBG(PPCDBG_BUSWALK, + "PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n", + BridgeInfo->busUnitInfo.deviceType, + BridgeInfo->subBusNumber, + BridgeInfo->maxAgents, + BridgeInfo->maxSubBusNumber, + BridgeInfo->logicalSlotNumber); + + if (BridgeInfo->busUnitInfo.deviceType == + HvCallPci_BridgeDevice) { + /* Scan_Bridge_Slot...: 0x18.00.12 */ + scan_bridge_slot(bus, BridgeInfo); + } else + printk("PCI: Invalid Bridge Configuration(0x%02X)", + BridgeInfo->busUnitInfo.deviceType); + } + } else if (HvRc != 0x000B) + pci_Log_Error("EADs Connect", + bus, SubBus, AgentId, HvRc); + } + kfree(BridgeInfo); +} + +/* + * This assumes that the node slot is always on the primary bus! + */ +static int scan_bridge_slot(HvBusNumber Bus, + struct HvCallPci_BridgeInfo *BridgeInfo) +{ + struct device_node *node; + HvSubBusNumber SubBus = BridgeInfo->subBusNumber; + u16 VendorId = 0; + int HvRc = 0; + u8 Irq = 0; + int IdSel = ISERIES_GET_DEVICE_FROM_SUBBUS(SubBus); + int Function = ISERIES_GET_FUNCTION_FROM_SUBBUS(SubBus); + HvAgentId EADsIdSel = ISERIES_PCI_AGENTID(IdSel, Function); + + /* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */ + Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel); + PPCDBG(PPCDBG_BUSWALK, + "PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n", + Bus, 0, EADsIdSel, Irq); + + /* + * Connect all functions of any device found. + */ + for (IdSel = 1; IdSel <= BridgeInfo->maxAgents; ++IdSel) { + for (Function = 0; Function < 8; ++Function) { + HvAgentId AgentId = ISERIES_PCI_AGENTID(IdSel, Function); + HvRc = HvCallXm_connectBusUnit(Bus, SubBus, + AgentId, Irq); + if (HvRc != 0) { + pci_Log_Error("Connect Bus Unit", + Bus, SubBus, AgentId, HvRc); + continue; + } + + HvRc = HvCallPci_configLoad16(Bus, SubBus, AgentId, + PCI_VENDOR_ID, &VendorId); + if (HvRc != 0) { + pci_Log_Error("Read Vendor", + Bus, SubBus, AgentId, HvRc); + continue; + } + printk("read vendor ID: %x\n", VendorId); + + /* FoundDevice: 0x18.28.10 = 0x12AE */ + PPCDBG(PPCDBG_BUSWALK, + "PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n", + Bus, SubBus, AgentId, VendorId, Irq); + HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId, + PCI_INTERRUPT_LINE, Irq); + if (HvRc != 0) + pci_Log_Error("PciCfgStore Irq Failed!", + Bus, SubBus, AgentId, HvRc); + + ++DeviceCount; + node = build_device_node(Bus, SubBus, EADsIdSel, Function); + PCI_DN(node)->Irq = Irq; + PCI_DN(node)->LogicalSlot = BridgeInfo->logicalSlotNumber; + + } /* for (Function = 0; Function < 8; ++Function) */ + } /* for (IdSel = 1; IdSel <= MaxAgents; ++IdSel) */ + return HvRc; +} + +/* + * I/0 Memory copy MUST use mmio commands on iSeries + * To do; For performance, include the hv call directly + */ +void iSeries_memset_io(volatile void __iomem *dest, char c, size_t Count) +{ + u8 ByteValue = c; + long NumberOfBytes = Count; + + while (NumberOfBytes > 0) { + iSeries_Write_Byte(ByteValue, dest++); + -- NumberOfBytes; + } +} +EXPORT_SYMBOL(iSeries_memset_io); + +void iSeries_memcpy_toio(volatile void __iomem *dest, void *source, size_t count) +{ + char *src = source; + long NumberOfBytes = count; + + while (NumberOfBytes > 0) { + iSeries_Write_Byte(*src++, dest++); + -- NumberOfBytes; + } +} +EXPORT_SYMBOL(iSeries_memcpy_toio); + +void iSeries_memcpy_fromio(void *dest, const volatile void __iomem *src, size_t count) +{ + char *dst = dest; + long NumberOfBytes = count; + + while (NumberOfBytes > 0) { + *dst++ = iSeries_Read_Byte(src++); + -- NumberOfBytes; + } +} +EXPORT_SYMBOL(iSeries_memcpy_fromio); + +/* + * Look down the chain to find the matching Device Device + */ +static struct device_node *find_Device_Node(int bus, int devfn) +{ + struct pci_dn *pdn; + + list_for_each_entry(pdn, &iSeries_Global_Device_List, Device_List) { + if ((bus == pdn->busno) && (devfn == pdn->devfn)) + return pdn->node; + } + return NULL; +} + +#if 0 +/* + * Returns the device node for the passed pci_dev + * Sanity Check Node PciDev to passed pci_dev + * If none is found, returns a NULL which the client must handle. + */ +static struct device_node *get_Device_Node(struct pci_dev *pdev) +{ + struct device_node *node; + + node = pdev->sysdata; + if (node == NULL || PCI_DN(node)->pcidev != pdev) + node = find_Device_Node(pdev->bus->number, pdev->devfn); + return node; +} +#endif + +/* + * Config space read and write functions. + * For now at least, we look for the device node for the bus and devfn + * that we are asked to access. It may be possible to translate the devfn + * to a subbus and deviceid more directly. + */ +static u64 hv_cfg_read_func[4] = { + HvCallPciConfigLoad8, HvCallPciConfigLoad16, + HvCallPciConfigLoad32, HvCallPciConfigLoad32 +}; + +static u64 hv_cfg_write_func[4] = { + HvCallPciConfigStore8, HvCallPciConfigStore16, + HvCallPciConfigStore32, HvCallPciConfigStore32 +}; + +/* + * Read PCI config space + */ +static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int size, u32 *val) +{ + struct device_node *node = find_Device_Node(bus->number, devfn); + u64 fn; + struct HvCallPci_LoadReturn ret; + + if (node == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset > 255) { + *val = ~0; + return PCIBIOS_BAD_REGISTER_NUMBER; + } + + fn = hv_cfg_read_func[(size - 1) & 3]; + HvCall3Ret16(fn, &ret, iseries_ds_addr(node), offset, 0); + + if (ret.rc != 0) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; /* or something */ + } + + *val = ret.value; + return 0; +} + +/* + * Write PCI config space + */ + +static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int size, u32 val) +{ + struct device_node *node = find_Device_Node(bus->number, devfn); + u64 fn; + u64 ret; + + if (node == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset > 255) + return PCIBIOS_BAD_REGISTER_NUMBER; + + fn = hv_cfg_write_func[(size - 1) & 3]; + ret = HvCall4(fn, iseries_ds_addr(node), offset, val, 0); + + if (ret != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + return 0; +} + +static struct pci_ops iSeries_pci_ops = { + .read = iSeries_pci_read_config, + .write = iSeries_pci_write_config +}; + +/* + * Check Return Code + * -> On Failure, print and log information. + * Increment Retry Count, if exceeds max, panic partition. + * + * PCI: Device 23.90 ReadL I/O Error( 0): 0x1234 + * PCI: Device 23.90 ReadL Retry( 1) + * PCI: Device 23.90 ReadL Retry Successful(1) + */ +static int CheckReturnCode(char *TextHdr, struct device_node *DevNode, + int *retry, u64 ret) +{ + if (ret != 0) { + struct pci_dn *pdn = PCI_DN(DevNode); + + ++Pci_Error_Count; + (*retry)++; + printk("PCI: %s: Device 0x%04X:%02X I/O Error(%2d): 0x%04X\n", + TextHdr, pdn->busno, pdn->devfn, + *retry, (int)ret); + /* + * Bump the retry and check for retry count exceeded. + * If, Exceeded, panic the system. + */ + if (((*retry) > Pci_Retry_Max) && + (Pci_Error_Flag > 0)) { + mf_display_src(0xB6000103); + panic_timeout = 0; + panic("PCI: Hardware I/O Error, SRC B6000103, " + "Automatic Reboot Disabled.\n"); + } + return -1; /* Retry Try */ + } + return 0; +} + +/* + * Translate the I/O Address into a device node, bar, and bar offset. + * Note: Make sure the passed variable end up on the stack to avoid + * the exposure of being device global. + */ +static inline struct device_node *xlate_iomm_address( + const volatile void __iomem *IoAddress, + u64 *dsaptr, u64 *BarOffsetPtr) +{ + unsigned long OrigIoAddr; + unsigned long BaseIoAddr; + unsigned long TableIndex; + struct device_node *DevNode; + + OrigIoAddr = (unsigned long __force)IoAddress; + if ((OrigIoAddr < BASE_IO_MEMORY) || (OrigIoAddr >= max_io_memory)) + return NULL; + BaseIoAddr = OrigIoAddr - BASE_IO_MEMORY; + TableIndex = BaseIoAddr / IOMM_TABLE_ENTRY_SIZE; + DevNode = iomm_table[TableIndex]; + + if (DevNode != NULL) { + int barnum = iobar_table[TableIndex]; + *dsaptr = iseries_ds_addr(DevNode) | (barnum << 24); + *BarOffsetPtr = BaseIoAddr % IOMM_TABLE_ENTRY_SIZE; + } else + panic("PCI: Invalid PCI IoAddress detected!\n"); + return DevNode; +} + +/* + * Read MM I/O Instructions for the iSeries + * On MM I/O error, all ones are returned and iSeries_pci_IoError is cal + * else, data is returned in big Endian format. + * + * iSeries_Read_Byte = Read Byte ( 8 bit) + * iSeries_Read_Word = Read Word (16 bit) + * iSeries_Read_Long = Read Long (32 bit) + */ +u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress) +{ + u64 BarOffset; + u64 dsa; + int retry = 0; + struct HvCallPci_LoadReturn ret; + struct device_node *DevNode = + xlate_iomm_address(IoAddress, &dsa, &BarOffset); + + if (DevNode == NULL) { + static unsigned long last_jiffies; + static int num_printed; + + if ((jiffies - last_jiffies) > 60 * HZ) { + last_jiffies = jiffies; + num_printed = 0; + } + if (num_printed++ < 10) + printk(KERN_ERR "iSeries_Read_Byte: invalid access at IO address %p\n", IoAddress); + return 0xff; + } + do { + ++Pci_Io_Read_Count; + HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0); + } while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0); + + return (u8)ret.value; +} +EXPORT_SYMBOL(iSeries_Read_Byte); + +u16 iSeries_Read_Word(const volatile void __iomem *IoAddress) +{ + u64 BarOffset; + u64 dsa; + int retry = 0; + struct HvCallPci_LoadReturn ret; + struct device_node *DevNode = + xlate_iomm_address(IoAddress, &dsa, &BarOffset); + + if (DevNode == NULL) { + static unsigned long last_jiffies; + static int num_printed; + + if ((jiffies - last_jiffies) > 60 * HZ) { + last_jiffies = jiffies; + num_printed = 0; + } + if (num_printed++ < 10) + printk(KERN_ERR "iSeries_Read_Word: invalid access at IO address %p\n", IoAddress); + return 0xffff; + } + do { + ++Pci_Io_Read_Count; + HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa, + BarOffset, 0); + } while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0); + + return swab16((u16)ret.value); +} +EXPORT_SYMBOL(iSeries_Read_Word); + +u32 iSeries_Read_Long(const volatile void __iomem *IoAddress) +{ + u64 BarOffset; + u64 dsa; + int retry = 0; + struct HvCallPci_LoadReturn ret; + struct device_node *DevNode = + xlate_iomm_address(IoAddress, &dsa, &BarOffset); + + if (DevNode == NULL) { + static unsigned long last_jiffies; + static int num_printed; + + if ((jiffies - last_jiffies) > 60 * HZ) { + last_jiffies = jiffies; + num_printed = 0; + } + if (num_printed++ < 10) + printk(KERN_ERR "iSeries_Read_Long: invalid access at IO address %p\n", IoAddress); + return 0xffffffff; + } + do { + ++Pci_Io_Read_Count; + HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa, + BarOffset, 0); + } while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0); + + return swab32((u32)ret.value); +} +EXPORT_SYMBOL(iSeries_Read_Long); + +/* + * Write MM I/O Instructions for the iSeries + * + * iSeries_Write_Byte = Write Byte (8 bit) + * iSeries_Write_Word = Write Word(16 bit) + * iSeries_Write_Long = Write Long(32 bit) + */ +void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress) +{ + u64 BarOffset; + u64 dsa; + int retry = 0; + u64 rc; + struct device_node *DevNode = + xlate_iomm_address(IoAddress, &dsa, &BarOffset); + + if (DevNode == NULL) { + static unsigned long last_jiffies; + static int num_printed; + + if ((jiffies - last_jiffies) > 60 * HZ) { + last_jiffies = jiffies; + num_printed = 0; + } + if (num_printed++ < 10) + printk(KERN_ERR "iSeries_Write_Byte: invalid access at IO address %p\n", IoAddress); + return; + } + do { + ++Pci_Io_Write_Count; + rc = HvCall4(HvCallPciBarStore8, dsa, BarOffset, data, 0); + } while (CheckReturnCode("WWB", DevNode, &retry, rc) != 0); +} +EXPORT_SYMBOL(iSeries_Write_Byte); + +void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress) +{ + u64 BarOffset; + u64 dsa; + int retry = 0; + u64 rc; + struct device_node *DevNode = + xlate_iomm_address(IoAddress, &dsa, &BarOffset); + + if (DevNode == NULL) { + static unsigned long last_jiffies; + static int num_printed; + + if ((jiffies - last_jiffies) > 60 * HZ) { + last_jiffies = jiffies; + num_printed = 0; + } + if (num_printed++ < 10) + printk(KERN_ERR "iSeries_Write_Word: invalid access at IO address %p\n", IoAddress); + return; + } + do { + ++Pci_Io_Write_Count; + rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, swab16(data), 0); + } while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0); +} +EXPORT_SYMBOL(iSeries_Write_Word); + +void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress) +{ + u64 BarOffset; + u64 dsa; + int retry = 0; + u64 rc; + struct device_node *DevNode = + xlate_iomm_address(IoAddress, &dsa, &BarOffset); + + if (DevNode == NULL) { + static unsigned long last_jiffies; + static int num_printed; + + if ((jiffies - last_jiffies) > 60 * HZ) { + last_jiffies = jiffies; + num_printed = 0; + } + if (num_printed++ < 10) + printk(KERN_ERR "iSeries_Write_Long: invalid access at IO address %p\n", IoAddress); + return; + } + do { + ++Pci_Io_Write_Count; + rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, swab32(data), 0); + } while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0); +} +EXPORT_SYMBOL(iSeries_Write_Long); diff --git a/arch/powerpc/platforms/iseries/pci.h b/arch/powerpc/platforms/iseries/pci.h new file mode 100644 index 00000000000..33a8489fde5 --- /dev/null +++ b/arch/powerpc/platforms/iseries/pci.h @@ -0,0 +1,63 @@ +#ifndef _PLATFORMS_ISERIES_PCI_H +#define _PLATFORMS_ISERIES_PCI_H + +/* + * Created by Allan Trautman on Tue Feb 20, 2001. + * + * Define some useful macros for the iSeries pci routines. + * Copyright (C) 2001 Allan H Trautman, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + * + * Change Activity: + * Created Feb 20, 2001 + * Added device reset, March 22, 2001 + * Ported to ppc64, May 25, 2001 + * End Change Activity + */ + +#include <asm/pci-bridge.h> + +struct pci_dev; /* For Forward Reference */ + +/* + * Decodes Linux DevFn to iSeries DevFn, bridge device, or function. + * For Linux, see PCI_SLOT and PCI_FUNC in include/linux/pci.h + */ + +#define ISERIES_PCI_AGENTID(idsel, func) \ + (((idsel & 0x0F) << 4) | (func & 0x07)) +#define ISERIES_ENCODE_DEVICE(agentid) \ + ((0x10) | ((agentid & 0x20) >> 2) | (agentid & 0x07)) + +#define ISERIES_GET_DEVICE_FROM_SUBBUS(subbus) ((subbus >> 5) & 0x7) +#define ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus) ((subbus >> 2) & 0x7) + +/* + * Generate a Direct Select Address for the Hypervisor + */ +static inline u64 iseries_ds_addr(struct device_node *node) +{ + struct pci_dn *pdn = PCI_DN(node); + + return ((u64)pdn->busno << 48) + ((u64)pdn->bussubno << 40) + + ((u64)0x10 << 32); +} + +extern void iSeries_Device_Information(struct pci_dev*, int); + +#endif /* _PLATFORMS_ISERIES_PCI_H */ diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c new file mode 100644 index 00000000000..6f1929cac66 --- /dev/null +++ b/arch/powerpc/platforms/iseries/proc.c @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2001 Kyle A. Lucke IBM Corporation + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/param.h> /* for HZ */ +#include <asm/paca.h> +#include <asm/processor.h> +#include <asm/time.h> +#include <asm/lppaca.h> +#include <asm/iSeries/ItLpQueue.h> +#include <asm/iSeries/HvCallXm.h> + +#include "processor_vpd.h" +#include "main_store.h" + +static int __init iseries_proc_create(void) +{ + struct proc_dir_entry *e = proc_mkdir("iSeries", 0); + if (!e) + return 1; + + return 0; +} +core_initcall(iseries_proc_create); + +static unsigned long startTitan = 0; +static unsigned long startTb = 0; + +static int proc_titantod_show(struct seq_file *m, void *v) +{ + unsigned long tb0, titan_tod; + + tb0 = get_tb(); + titan_tod = HvCallXm_loadTod(); + + seq_printf(m, "Titan\n" ); + seq_printf(m, " time base = %016lx\n", tb0); + seq_printf(m, " titan tod = %016lx\n", titan_tod); + seq_printf(m, " xProcFreq = %016x\n", + xIoHriProcessorVpd[0].xProcFreq); + seq_printf(m, " xTimeBaseFreq = %016x\n", + xIoHriProcessorVpd[0].xTimeBaseFreq); + seq_printf(m, " tb_ticks_per_jiffy = %lu\n", tb_ticks_per_jiffy); + seq_printf(m, " tb_ticks_per_usec = %lu\n", tb_ticks_per_usec); + + if (!startTitan) { + startTitan = titan_tod; + startTb = tb0; + } else { + unsigned long titan_usec = (titan_tod - startTitan) >> 12; + unsigned long tb_ticks = (tb0 - startTb); + unsigned long titan_jiffies = titan_usec / (1000000/HZ); + unsigned long titan_jiff_usec = titan_jiffies * (1000000/HZ); + unsigned long titan_jiff_rem_usec = + titan_usec - titan_jiff_usec; + unsigned long tb_jiffies = tb_ticks / tb_ticks_per_jiffy; + unsigned long tb_jiff_ticks = tb_jiffies * tb_ticks_per_jiffy; + unsigned long tb_jiff_rem_ticks = tb_ticks - tb_jiff_ticks; + unsigned long tb_jiff_rem_usec = + tb_jiff_rem_ticks / tb_ticks_per_usec; + unsigned long new_tb_ticks_per_jiffy = + (tb_ticks * (1000000/HZ))/titan_usec; + + seq_printf(m, " titan elapsed = %lu uSec\n", titan_usec); + seq_printf(m, " tb elapsed = %lu ticks\n", tb_ticks); + seq_printf(m, " titan jiffies = %lu.%04lu \n", titan_jiffies, + titan_jiff_rem_usec); + seq_printf(m, " tb jiffies = %lu.%04lu\n", tb_jiffies, + tb_jiff_rem_usec); + seq_printf(m, " new tb_ticks_per_jiffy = %lu\n", + new_tb_ticks_per_jiffy); + } + + return 0; +} + +static int proc_titantod_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_titantod_show, NULL); +} + +static struct file_operations proc_titantod_operations = { + .open = proc_titantod_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init iseries_proc_init(void) +{ + struct proc_dir_entry *e; + + e = create_proc_entry("iSeries/titanTod", S_IFREG|S_IRUGO, NULL); + if (e) + e->proc_fops = &proc_titantod_operations; + + return 0; +} +__initcall(iseries_proc_init); diff --git a/arch/powerpc/platforms/iseries/processor_vpd.h b/arch/powerpc/platforms/iseries/processor_vpd.h new file mode 100644 index 00000000000..7ac5d0d0dbf --- /dev/null +++ b/arch/powerpc/platforms/iseries/processor_vpd.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ISERIES_PROCESSOR_VPD_H +#define _ISERIES_PROCESSOR_VPD_H + +#include <asm/types.h> + +/* + * This struct maps Processor Vpd that is DMAd to SLIC by CSP + */ +struct IoHriProcessorVpd { + u8 xFormat; // VPD format indicator x00-x00 + u8 xProcStatus:8; // Processor State x01-x01 + u8 xSecondaryThreadCount; // Secondary thread cnt x02-x02 + u8 xSrcType:1; // Src Type x03-x03 + u8 xSrcSoft:1; // Src stay soft ... + u8 xSrcParable:1; // Src parable ... + u8 xRsvd1:5; // Reserved ... + u16 xHvPhysicalProcIndex; // Hypervisor physical proc index04-x05 + u16 xRsvd2; // Reserved x06-x07 + u32 xHwNodeId; // Hardware node id x08-x0B + u32 xHwProcId; // Hardware processor id x0C-x0F + + u32 xTypeNum; // Card Type/CCIN number x10-x13 + u32 xModelNum; // Model/Feature number x14-x17 + u64 xSerialNum; // Serial number x18-x1F + char xPartNum[12]; // Book Part or FPU number x20-x2B + char xMfgID[4]; // Manufacturing ID x2C-x2F + + u32 xProcFreq; // Processor Frequency x30-x33 + u32 xTimeBaseFreq; // Time Base Frequency x34-x37 + + u32 xChipEcLevel; // Chip EC Levels x38-x3B + u32 xProcIdReg; // PIR SPR value x3C-x3F + u32 xPVR; // PVR value x40-x43 + u8 xRsvd3[12]; // Reserved x44-x4F + + u32 xInstCacheSize; // Instruction cache size in KB x50-x53 + u32 xInstBlockSize; // Instruction cache block size x54-x57 + u32 xDataCacheOperandSize; // Data cache operand size x58-x5B + u32 xInstCacheOperandSize; // Inst cache operand size x5C-x5F + + u32 xDataL1CacheSizeKB; // L1 data cache size in KB x60-x63 + u32 xDataL1CacheLineSize; // L1 data cache block size x64-x67 + u64 xRsvd4; // Reserved x68-x6F + + u32 xDataL2CacheSizeKB; // L2 data cache size in KB x70-x73 + u32 xDataL2CacheLineSize; // L2 data cache block size x74-x77 + u64 xRsvd5; // Reserved x78-x7F + + u32 xDataL3CacheSizeKB; // L3 data cache size in KB x80-x83 + u32 xDataL3CacheLineSize; // L3 data cache block size x84-x87 + u64 xRsvd6; // Reserved x88-x8F + + u64 xFruLabel; // Card Location Label x90-x97 + u8 xSlotsOnCard; // Slots on card (0=no slots) x98-x98 + u8 xPartLocFlag; // Location flag (0-pluggable 1-imbedded) x99-x99 + u16 xSlotMapIndex; // Index in slot map table x9A-x9B + u8 xSmartCardPortNo; // Smart card port number x9C-x9C + u8 xRsvd7; // Reserved x9D-x9D + u16 xFrameIdAndRackUnit; // Frame ID and rack unit adr x9E-x9F + + u8 xRsvd8[24]; // Reserved xA0-xB7 + + char xProcSrc[72]; // CSP format SRC xB8-xFF +}; + +extern struct IoHriProcessorVpd xIoHriProcessorVpd[]; + +#endif /* _ISERIES_PROCESSOR_VPD_H */ diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h new file mode 100644 index 00000000000..c68b9c3e5ca --- /dev/null +++ b/arch/powerpc/platforms/iseries/release_data.h @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ISERIES_RELEASE_DATA_H +#define _ISERIES_RELEASE_DATA_H + +/* + * This control block contains the critical information about the + * release so that it can be changed in the future (ie, the virtual + * address of the OS's NACA). + */ +#include <asm/types.h> +#include <asm/naca.h> + +/* + * When we IPL a secondary partition, we will check if if the + * secondary xMinPlicVrmIndex > the primary xVrmIndex. + * If it is then this tells PLIC that this secondary is not + * supported running on this "old" of a level of PLIC. + * + * Likewise, we will compare the primary xMinSlicVrmIndex to + * the secondary xVrmIndex. + * If the primary xMinSlicVrmDelta > secondary xVrmDelta then we + * know that this PLIC does not support running an OS "that old". + */ + +#define HVREL_TAGSINACTIVE 0x8000 +#define HVREL_32BIT 0x4000 +#define HVREL_NOSHAREDPROCS 0x2000 +#define HVREL_NOHMT 0x1000 + +struct HvReleaseData { + u32 xDesc; /* Descriptor "HvRD" ebcdic x00-x03 */ + u16 xSize; /* Size of this control block x04-x05 */ + u16 xVpdAreasPtrOffset; /* Offset in NACA of ItVpdAreas x06-x07 */ + struct naca_struct *xSlicNacaAddr; /* Virt addr of SLIC NACA x08-x0F */ + u32 xMsNucDataOffset; /* Offset of Linux Mapping Data x10-x13 */ + u32 xRsvd1; /* Reserved x14-x17 */ + u16 xFlags; + u16 xVrmIndex; /* VRM Index of OS image x1A-x1B */ + u16 xMinSupportedPlicVrmIndex; /* Min PLIC level (soft) x1C-x1D */ + u16 xMinCompatablePlicVrmIndex; /* Min PLIC levelP (hard) x1E-x1F */ + char xVrmName[12]; /* Displayable name x20-x2B */ + char xRsvd3[20]; /* Reserved x2C-x3F */ +}; + +extern struct HvReleaseData hvReleaseData; + +#endif /* _ISERIES_RELEASE_DATA_H */ diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c new file mode 100644 index 00000000000..1544c6f10a3 --- /dev/null +++ b/arch/powerpc/platforms/iseries/setup.c @@ -0,0 +1,996 @@ +/* + * Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com> + * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> + * + * Description: + * Architecture- / platform-specific boot-time initialization code for + * the IBM iSeries LPAR. Adapted from original code by Grant Erickson and + * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek + * <dan@net4x.com>. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/threads.h> +#include <linux/smp.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/initrd.h> +#include <linux/seq_file.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/root_dev.h> + +#include <asm/processor.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/mmu.h> +#include <asm/pgtable.h> +#include <asm/mmu_context.h> +#include <asm/cputable.h> +#include <asm/sections.h> +#include <asm/iommu.h> +#include <asm/firmware.h> + +#include <asm/time.h> +#include <asm/naca.h> +#include <asm/paca.h> +#include <asm/cache.h> +#include <asm/sections.h> +#include <asm/abs_addr.h> +#include <asm/iSeries/HvLpConfig.h> +#include <asm/iSeries/HvCallEvent.h> +#include <asm/iSeries/HvCallXm.h> +#include <asm/iSeries/ItLpQueue.h> +#include <asm/iSeries/mf.h> +#include <asm/iSeries/HvLpEvent.h> +#include <asm/iSeries/LparMap.h> + +#include "setup.h" +#include "irq.h" +#include "vpd_areas.h" +#include "processor_vpd.h" +#include "main_store.h" +#include "call_sm.h" +#include "call_hpt.h" + +extern void hvlog(char *fmt, ...); + +#ifdef DEBUG +#define DBG(fmt...) hvlog(fmt) +#else +#define DBG(fmt...) +#endif + +/* Function Prototypes */ +extern void ppcdbg_initialize(void); + +static void build_iSeries_Memory_Map(void); +static void iseries_shared_idle(void); +static void iseries_dedicated_idle(void); +#ifdef CONFIG_PCI +extern void iSeries_pci_final_fixup(void); +#else +static void iSeries_pci_final_fixup(void) { } +#endif + +/* Global Variables */ +int piranha_simulator; + +extern int rd_size; /* Defined in drivers/block/rd.c */ +extern unsigned long klimit; +extern unsigned long embedded_sysmap_start; +extern unsigned long embedded_sysmap_end; + +extern unsigned long iSeries_recal_tb; +extern unsigned long iSeries_recal_titan; + +static int mf_initialized; + +struct MemoryBlock { + unsigned long absStart; + unsigned long absEnd; + unsigned long logicalStart; + unsigned long logicalEnd; +}; + +/* + * Process the main store vpd to determine where the holes in memory are + * and return the number of physical blocks and fill in the array of + * block data. + */ +static unsigned long iSeries_process_Condor_mainstore_vpd( + struct MemoryBlock *mb_array, unsigned long max_entries) +{ + unsigned long holeFirstChunk, holeSizeChunks; + unsigned long numMemoryBlocks = 1; + struct IoHriMainStoreSegment4 *msVpd = + (struct IoHriMainStoreSegment4 *)xMsVpd; + unsigned long holeStart = msVpd->nonInterleavedBlocksStartAdr; + unsigned long holeEnd = msVpd->nonInterleavedBlocksEndAdr; + unsigned long holeSize = holeEnd - holeStart; + + printk("Mainstore_VPD: Condor\n"); + /* + * Determine if absolute memory has any + * holes so that we can interpret the + * access map we get back from the hypervisor + * correctly. + */ + mb_array[0].logicalStart = 0; + mb_array[0].logicalEnd = 0x100000000; + mb_array[0].absStart = 0; + mb_array[0].absEnd = 0x100000000; + + if (holeSize) { + numMemoryBlocks = 2; + holeStart = holeStart & 0x000fffffffffffff; + holeStart = addr_to_chunk(holeStart); + holeFirstChunk = holeStart; + holeSize = addr_to_chunk(holeSize); + holeSizeChunks = holeSize; + printk( "Main store hole: start chunk = %0lx, size = %0lx chunks\n", + holeFirstChunk, holeSizeChunks ); + mb_array[0].logicalEnd = holeFirstChunk; + mb_array[0].absEnd = holeFirstChunk; + mb_array[1].logicalStart = holeFirstChunk; + mb_array[1].logicalEnd = 0x100000000 - holeSizeChunks; + mb_array[1].absStart = holeFirstChunk + holeSizeChunks; + mb_array[1].absEnd = 0x100000000; + } + return numMemoryBlocks; +} + +#define MaxSegmentAreas 32 +#define MaxSegmentAdrRangeBlocks 128 +#define MaxAreaRangeBlocks 4 + +static unsigned long iSeries_process_Regatta_mainstore_vpd( + struct MemoryBlock *mb_array, unsigned long max_entries) +{ + struct IoHriMainStoreSegment5 *msVpdP = + (struct IoHriMainStoreSegment5 *)xMsVpd; + unsigned long numSegmentBlocks = 0; + u32 existsBits = msVpdP->msAreaExists; + unsigned long area_num; + + printk("Mainstore_VPD: Regatta\n"); + + for (area_num = 0; area_num < MaxSegmentAreas; ++area_num ) { + unsigned long numAreaBlocks; + struct IoHriMainStoreArea4 *currentArea; + + if (existsBits & 0x80000000) { + unsigned long block_num; + + currentArea = &msVpdP->msAreaArray[area_num]; + numAreaBlocks = currentArea->numAdrRangeBlocks; + printk("ms_vpd: processing area %2ld blocks=%ld", + area_num, numAreaBlocks); + for (block_num = 0; block_num < numAreaBlocks; + ++block_num ) { + /* Process an address range block */ + struct MemoryBlock tempBlock; + unsigned long i; + + tempBlock.absStart = + (unsigned long)currentArea->xAdrRangeBlock[block_num].blockStart; + tempBlock.absEnd = + (unsigned long)currentArea->xAdrRangeBlock[block_num].blockEnd; + tempBlock.logicalStart = 0; + tempBlock.logicalEnd = 0; + printk("\n block %ld absStart=%016lx absEnd=%016lx", + block_num, tempBlock.absStart, + tempBlock.absEnd); + + for (i = 0; i < numSegmentBlocks; ++i) { + if (mb_array[i].absStart == + tempBlock.absStart) + break; + } + if (i == numSegmentBlocks) { + if (numSegmentBlocks == max_entries) + panic("iSeries_process_mainstore_vpd: too many memory blocks"); + mb_array[numSegmentBlocks] = tempBlock; + ++numSegmentBlocks; + } else + printk(" (duplicate)"); + } + printk("\n"); + } + existsBits <<= 1; + } + /* Now sort the blocks found into ascending sequence */ + if (numSegmentBlocks > 1) { + unsigned long m, n; + + for (m = 0; m < numSegmentBlocks - 1; ++m) { + for (n = numSegmentBlocks - 1; m < n; --n) { + if (mb_array[n].absStart < + mb_array[n-1].absStart) { + struct MemoryBlock tempBlock; + + tempBlock = mb_array[n]; + mb_array[n] = mb_array[n-1]; + mb_array[n-1] = tempBlock; + } + } + } + } + /* + * Assign "logical" addresses to each block. These + * addresses correspond to the hypervisor "bitmap" space. + * Convert all addresses into units of 256K chunks. + */ + { + unsigned long i, nextBitmapAddress; + + printk("ms_vpd: %ld sorted memory blocks\n", numSegmentBlocks); + nextBitmapAddress = 0; + for (i = 0; i < numSegmentBlocks; ++i) { + unsigned long length = mb_array[i].absEnd - + mb_array[i].absStart; + + mb_array[i].logicalStart = nextBitmapAddress; + mb_array[i].logicalEnd = nextBitmapAddress + length; + nextBitmapAddress += length; + printk(" Bitmap range: %016lx - %016lx\n" + " Absolute range: %016lx - %016lx\n", + mb_array[i].logicalStart, + mb_array[i].logicalEnd, + mb_array[i].absStart, mb_array[i].absEnd); + mb_array[i].absStart = addr_to_chunk(mb_array[i].absStart & + 0x000fffffffffffff); + mb_array[i].absEnd = addr_to_chunk(mb_array[i].absEnd & + 0x000fffffffffffff); + mb_array[i].logicalStart = + addr_to_chunk(mb_array[i].logicalStart); + mb_array[i].logicalEnd = addr_to_chunk(mb_array[i].logicalEnd); + } + } + + return numSegmentBlocks; +} + +static unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array, + unsigned long max_entries) +{ + unsigned long i; + unsigned long mem_blocks = 0; + + if (cpu_has_feature(CPU_FTR_SLB)) + mem_blocks = iSeries_process_Regatta_mainstore_vpd(mb_array, + max_entries); + else + mem_blocks = iSeries_process_Condor_mainstore_vpd(mb_array, + max_entries); + + printk("Mainstore_VPD: numMemoryBlocks = %ld \n", mem_blocks); + for (i = 0; i < mem_blocks; ++i) { + printk("Mainstore_VPD: block %3ld logical chunks %016lx - %016lx\n" + " abs chunks %016lx - %016lx\n", + i, mb_array[i].logicalStart, mb_array[i].logicalEnd, + mb_array[i].absStart, mb_array[i].absEnd); + } + return mem_blocks; +} + +static void __init iSeries_get_cmdline(void) +{ + char *p, *q; + + /* copy the command line parameter from the primary VSP */ + HvCallEvent_dmaToSp(cmd_line, 2 * 64* 1024, 256, + HvLpDma_Direction_RemoteToLocal); + + p = cmd_line; + q = cmd_line + 255; + while(p < q) { + if (!*p || *p == '\n') + break; + ++p; + } + *p = 0; +} + +static void __init iSeries_init_early(void) +{ + DBG(" -> iSeries_init_early()\n"); + + ppc64_firmware_features = FW_FEATURE_ISERIES; + + ppcdbg_initialize(); + + ppc64_interrupt_controller = IC_ISERIES; + +#if defined(CONFIG_BLK_DEV_INITRD) + /* + * If the init RAM disk has been configured and there is + * a non-zero starting address for it, set it up + */ + if (naca.xRamDisk) { + initrd_start = (unsigned long)__va(naca.xRamDisk); + initrd_end = initrd_start + naca.xRamDiskSize * PAGE_SIZE; + initrd_below_start_ok = 1; // ramdisk in kernel space + ROOT_DEV = Root_RAM0; + if (((rd_size * 1024) / PAGE_SIZE) < naca.xRamDiskSize) + rd_size = (naca.xRamDiskSize * PAGE_SIZE) / 1024; + } else +#endif /* CONFIG_BLK_DEV_INITRD */ + { + /* ROOT_DEV = MKDEV(VIODASD_MAJOR, 1); */ + } + + iSeries_recal_tb = get_tb(); + iSeries_recal_titan = HvCallXm_loadTod(); + + /* + * Initialize the hash table management pointers + */ + hpte_init_iSeries(); + + /* + * Initialize the DMA/TCE management + */ + iommu_init_early_iSeries(); + + iSeries_get_cmdline(); + + /* Save unparsed command line copy for /proc/cmdline */ + strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); + + /* Parse early parameters, in particular mem=x */ + parse_early_param(); + + if (memory_limit) { + if (memory_limit < systemcfg->physicalMemorySize) + systemcfg->physicalMemorySize = memory_limit; + else { + printk("Ignoring mem=%lu >= ram_top.\n", memory_limit); + memory_limit = 0; + } + } + + /* Initialize machine-dependency vectors */ +#ifdef CONFIG_SMP + smp_init_iSeries(); +#endif + if (itLpNaca.xPirEnvironMode == 0) + piranha_simulator = 1; + + /* Associate Lp Event Queue 0 with processor 0 */ + HvCallEvent_setLpEventQueueInterruptProc(0, 0); + + mf_init(); + mf_initialized = 1; + mb(); + + /* If we were passed an initrd, set the ROOT_DEV properly if the values + * look sensible. If not, clear initrd reference. + */ +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && + initrd_end > initrd_start) + ROOT_DEV = Root_RAM0; + else + initrd_start = initrd_end = 0; +#endif /* CONFIG_BLK_DEV_INITRD */ + + DBG(" <- iSeries_init_early()\n"); +} + +struct mschunks_map mschunks_map = { + /* XXX We don't use these, but Piranha might need them. */ + .chunk_size = MSCHUNKS_CHUNK_SIZE, + .chunk_shift = MSCHUNKS_CHUNK_SHIFT, + .chunk_mask = MSCHUNKS_OFFSET_MASK, +}; +EXPORT_SYMBOL(mschunks_map); + +void mschunks_alloc(unsigned long num_chunks) +{ + klimit = _ALIGN(klimit, sizeof(u32)); + mschunks_map.mapping = (u32 *)klimit; + klimit += num_chunks * sizeof(u32); + mschunks_map.num_chunks = num_chunks; +} + +/* + * The iSeries may have very large memories ( > 128 GB ) and a partition + * may get memory in "chunks" that may be anywhere in the 2**52 real + * address space. The chunks are 256K in size. To map this to the + * memory model Linux expects, the AS/400 specific code builds a + * translation table to translate what Linux thinks are "physical" + * addresses to the actual real addresses. This allows us to make + * it appear to Linux that we have contiguous memory starting at + * physical address zero while in fact this could be far from the truth. + * To avoid confusion, I'll let the words physical and/or real address + * apply to the Linux addresses while I'll use "absolute address" to + * refer to the actual hardware real address. + * + * build_iSeries_Memory_Map gets information from the Hypervisor and + * looks at the Main Store VPD to determine the absolute addresses + * of the memory that has been assigned to our partition and builds + * a table used to translate Linux's physical addresses to these + * absolute addresses. Absolute addresses are needed when + * communicating with the hypervisor (e.g. to build HPT entries) + */ + +static void __init build_iSeries_Memory_Map(void) +{ + u32 loadAreaFirstChunk, loadAreaLastChunk, loadAreaSize; + u32 nextPhysChunk; + u32 hptFirstChunk, hptLastChunk, hptSizeChunks, hptSizePages; + u32 totalChunks,moreChunks; + u32 currChunk, thisChunk, absChunk; + u32 currDword; + u32 chunkBit; + u64 map; + struct MemoryBlock mb[32]; + unsigned long numMemoryBlocks, curBlock; + + /* Chunk size on iSeries is 256K bytes */ + totalChunks = (u32)HvLpConfig_getMsChunks(); + mschunks_alloc(totalChunks); + + /* + * Get absolute address of our load area + * and map it to physical address 0 + * This guarantees that the loadarea ends up at physical 0 + * otherwise, it might not be returned by PLIC as the first + * chunks + */ + + loadAreaFirstChunk = (u32)addr_to_chunk(itLpNaca.xLoadAreaAddr); + loadAreaSize = itLpNaca.xLoadAreaChunks; + + /* + * Only add the pages already mapped here. + * Otherwise we might add the hpt pages + * The rest of the pages of the load area + * aren't in the HPT yet and can still + * be assigned an arbitrary physical address + */ + if ((loadAreaSize * 64) > HvPagesToMap) + loadAreaSize = HvPagesToMap / 64; + + loadAreaLastChunk = loadAreaFirstChunk + loadAreaSize - 1; + + /* + * TODO Do we need to do something if the HPT is in the 64MB load area? + * This would be required if the itLpNaca.xLoadAreaChunks includes + * the HPT size + */ + + printk("Mapping load area - physical addr = 0000000000000000\n" + " absolute addr = %016lx\n", + chunk_to_addr(loadAreaFirstChunk)); + printk("Load area size %dK\n", loadAreaSize * 256); + + for (nextPhysChunk = 0; nextPhysChunk < loadAreaSize; ++nextPhysChunk) + mschunks_map.mapping[nextPhysChunk] = + loadAreaFirstChunk + nextPhysChunk; + + /* + * Get absolute address of our HPT and remember it so + * we won't map it to any physical address + */ + hptFirstChunk = (u32)addr_to_chunk(HvCallHpt_getHptAddress()); + hptSizePages = (u32)HvCallHpt_getHptPages(); + hptSizeChunks = hptSizePages >> (MSCHUNKS_CHUNK_SHIFT - PAGE_SHIFT); + hptLastChunk = hptFirstChunk + hptSizeChunks - 1; + + printk("HPT absolute addr = %016lx, size = %dK\n", + chunk_to_addr(hptFirstChunk), hptSizeChunks * 256); + + ppc64_pft_size = __ilog2(hptSizePages * PAGE_SIZE); + + /* + * The actual hashed page table is in the hypervisor, + * we have no direct access + */ + htab_address = NULL; + + /* + * Determine if absolute memory has any + * holes so that we can interpret the + * access map we get back from the hypervisor + * correctly. + */ + numMemoryBlocks = iSeries_process_mainstore_vpd(mb, 32); + + /* + * Process the main store access map from the hypervisor + * to build up our physical -> absolute translation table + */ + curBlock = 0; + currChunk = 0; + currDword = 0; + moreChunks = totalChunks; + + while (moreChunks) { + map = HvCallSm_get64BitsOfAccessMap(itLpNaca.xLpIndex, + currDword); + thisChunk = currChunk; + while (map) { + chunkBit = map >> 63; + map <<= 1; + if (chunkBit) { + --moreChunks; + while (thisChunk >= mb[curBlock].logicalEnd) { + ++curBlock; + if (curBlock >= numMemoryBlocks) + panic("out of memory blocks"); + } + if (thisChunk < mb[curBlock].logicalStart) + panic("memory block error"); + + absChunk = mb[curBlock].absStart + + (thisChunk - mb[curBlock].logicalStart); + if (((absChunk < hptFirstChunk) || + (absChunk > hptLastChunk)) && + ((absChunk < loadAreaFirstChunk) || + (absChunk > loadAreaLastChunk))) { + mschunks_map.mapping[nextPhysChunk] = + absChunk; + ++nextPhysChunk; + } + } + ++thisChunk; + } + ++currDword; + currChunk += 64; + } + + /* + * main store size (in chunks) is + * totalChunks - hptSizeChunks + * which should be equal to + * nextPhysChunk + */ + systemcfg->physicalMemorySize = chunk_to_addr(nextPhysChunk); +} + +/* + * Document me. + */ +static void __init iSeries_setup_arch(void) +{ + unsigned procIx = get_paca()->lppaca.dyn_hv_phys_proc_index; + + if (get_paca()->lppaca.shared_proc) { + ppc_md.idle_loop = iseries_shared_idle; + printk(KERN_INFO "Using shared processor idle loop\n"); + } else { + ppc_md.idle_loop = iseries_dedicated_idle; + printk(KERN_INFO "Using dedicated idle loop\n"); + } + + /* Setup the Lp Event Queue */ + setup_hvlpevent_queue(); + + printk("Max logical processors = %d\n", + itVpdAreas.xSlicMaxLogicalProcs); + printk("Max physical processors = %d\n", + itVpdAreas.xSlicMaxPhysicalProcs); + + systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; + printk("Processor version = %x\n", systemcfg->processor); +} + +static void iSeries_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "machine\t\t: 64-bit iSeries Logical Partition\n"); +} + +/* + * Document me. + * and Implement me. + */ +static int iSeries_get_irq(struct pt_regs *regs) +{ + /* -2 means ignore this interrupt */ + return -2; +} + +/* + * Document me. + */ +static void iSeries_restart(char *cmd) +{ + mf_reboot(); +} + +/* + * Document me. + */ +static void iSeries_power_off(void) +{ + mf_power_off(); +} + +/* + * Document me. + */ +static void iSeries_halt(void) +{ + mf_power_off(); +} + +static void __init iSeries_progress(char * st, unsigned short code) +{ + printk("Progress: [%04x] - %s\n", (unsigned)code, st); + if (!piranha_simulator && mf_initialized) { + if (code != 0xffff) + mf_display_progress(code); + else + mf_clear_src(); + } +} + +static void __init iSeries_fixup_klimit(void) +{ + /* + * Change klimit to take into account any ram disk + * that may be included + */ + if (naca.xRamDisk) + klimit = KERNELBASE + (u64)naca.xRamDisk + + (naca.xRamDiskSize * PAGE_SIZE); + else { + /* + * No ram disk was included - check and see if there + * was an embedded system map. Change klimit to take + * into account any embedded system map + */ + if (embedded_sysmap_end) + klimit = KERNELBASE + ((embedded_sysmap_end + 4095) & + 0xfffffffffffff000); + } +} + +static int __init iSeries_src_init(void) +{ + /* clear the progress line */ + ppc_md.progress(" ", 0xffff); + return 0; +} + +late_initcall(iSeries_src_init); + +static inline void process_iSeries_events(void) +{ + asm volatile ("li 0,0x5555; sc" : : : "r0", "r3"); +} + +static void yield_shared_processor(void) +{ + unsigned long tb; + + HvCall_setEnabledInterrupts(HvCall_MaskIPI | + HvCall_MaskLpEvent | + HvCall_MaskLpProd | + HvCall_MaskTimeout); + + tb = get_tb(); + /* Compute future tb value when yield should expire */ + HvCall_yieldProcessor(HvCall_YieldTimed, tb+tb_ticks_per_jiffy); + + /* + * The decrementer stops during the yield. Force a fake decrementer + * here and let the timer_interrupt code sort out the actual time. + */ + get_paca()->lppaca.int_dword.fields.decr_int = 1; + process_iSeries_events(); +} + +static void iseries_shared_idle(void) +{ + while (1) { + while (!need_resched() && !hvlpevent_is_pending()) { + local_irq_disable(); + ppc64_runlatch_off(); + + /* Recheck with irqs off */ + if (!need_resched() && !hvlpevent_is_pending()) + yield_shared_processor(); + + HMT_medium(); + local_irq_enable(); + } + + ppc64_runlatch_on(); + + if (hvlpevent_is_pending()) + process_iSeries_events(); + + schedule(); + } +} + +static void iseries_dedicated_idle(void) +{ + long oldval; + + while (1) { + oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); + + if (!oldval) { + set_thread_flag(TIF_POLLING_NRFLAG); + + while (!need_resched()) { + ppc64_runlatch_off(); + HMT_low(); + + if (hvlpevent_is_pending()) { + HMT_medium(); + ppc64_runlatch_on(); + process_iSeries_events(); + } + } + + HMT_medium(); + clear_thread_flag(TIF_POLLING_NRFLAG); + } else { + set_need_resched(); + } + + ppc64_runlatch_on(); + schedule(); + } +} + +#ifndef CONFIG_PCI +void __init iSeries_init_IRQ(void) { } +#endif + +static int __init iseries_probe(int platform) +{ + return PLATFORM_ISERIES_LPAR == platform; +} + +struct machdep_calls __initdata iseries_md = { + .setup_arch = iSeries_setup_arch, + .show_cpuinfo = iSeries_show_cpuinfo, + .init_IRQ = iSeries_init_IRQ, + .get_irq = iSeries_get_irq, + .init_early = iSeries_init_early, + .pcibios_fixup = iSeries_pci_final_fixup, + .restart = iSeries_restart, + .power_off = iSeries_power_off, + .halt = iSeries_halt, + .get_boot_time = iSeries_get_boot_time, + .set_rtc_time = iSeries_set_rtc_time, + .get_rtc_time = iSeries_get_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = iSeries_progress, + .probe = iseries_probe, + /* XXX Implement enable_pmcs for iSeries */ +}; + +struct blob { + unsigned char data[PAGE_SIZE]; + unsigned long next; +}; + +struct iseries_flat_dt { + struct boot_param_header header; + u64 reserve_map[2]; + struct blob dt; + struct blob strings; +}; + +struct iseries_flat_dt iseries_dt; + +void dt_init(struct iseries_flat_dt *dt) +{ + dt->header.off_mem_rsvmap = + offsetof(struct iseries_flat_dt, reserve_map); + dt->header.off_dt_struct = offsetof(struct iseries_flat_dt, dt); + dt->header.off_dt_strings = offsetof(struct iseries_flat_dt, strings); + dt->header.totalsize = sizeof(struct iseries_flat_dt); + dt->header.dt_strings_size = sizeof(struct blob); + + /* There is no notion of hardware cpu id on iSeries */ + dt->header.boot_cpuid_phys = smp_processor_id(); + + dt->dt.next = (unsigned long)&dt->dt.data; + dt->strings.next = (unsigned long)&dt->strings.data; + + dt->header.magic = OF_DT_HEADER; + dt->header.version = 0x10; + dt->header.last_comp_version = 0x10; + + dt->reserve_map[0] = 0; + dt->reserve_map[1] = 0; +} + +void dt_check_blob(struct blob *b) +{ + if (b->next >= (unsigned long)&b->next) { + DBG("Ran out of space in flat device tree blob!\n"); + BUG(); + } +} + +void dt_push_u32(struct iseries_flat_dt *dt, u32 value) +{ + *((u32*)dt->dt.next) = value; + dt->dt.next += sizeof(u32); + + dt_check_blob(&dt->dt); +} + +void dt_push_u64(struct iseries_flat_dt *dt, u64 value) +{ + *((u64*)dt->dt.next) = value; + dt->dt.next += sizeof(u64); + + dt_check_blob(&dt->dt); +} + +unsigned long dt_push_bytes(struct blob *blob, char *data, int len) +{ + unsigned long start = blob->next - (unsigned long)blob->data; + + memcpy((char *)blob->next, data, len); + blob->next = _ALIGN(blob->next + len, 4); + + dt_check_blob(blob); + + return start; +} + +void dt_start_node(struct iseries_flat_dt *dt, char *name) +{ + dt_push_u32(dt, OF_DT_BEGIN_NODE); + dt_push_bytes(&dt->dt, name, strlen(name) + 1); +} + +#define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE) + +void dt_prop(struct iseries_flat_dt *dt, char *name, char *data, int len) +{ + unsigned long offset; + + dt_push_u32(dt, OF_DT_PROP); + + /* Length of the data */ + dt_push_u32(dt, len); + + /* Put the property name in the string blob. */ + offset = dt_push_bytes(&dt->strings, name, strlen(name) + 1); + + /* The offset of the properties name in the string blob. */ + dt_push_u32(dt, (u32)offset); + + /* The actual data. */ + dt_push_bytes(&dt->dt, data, len); +} + +void dt_prop_str(struct iseries_flat_dt *dt, char *name, char *data) +{ + dt_prop(dt, name, data, strlen(data) + 1); /* + 1 for NULL */ +} + +void dt_prop_u32(struct iseries_flat_dt *dt, char *name, u32 data) +{ + dt_prop(dt, name, (char *)&data, sizeof(u32)); +} + +void dt_prop_u64(struct iseries_flat_dt *dt, char *name, u64 data) +{ + dt_prop(dt, name, (char *)&data, sizeof(u64)); +} + +void dt_prop_u64_list(struct iseries_flat_dt *dt, char *name, u64 *data, int n) +{ + dt_prop(dt, name, (char *)data, sizeof(u64) * n); +} + +void dt_prop_empty(struct iseries_flat_dt *dt, char *name) +{ + dt_prop(dt, name, NULL, 0); +} + +void dt_cpus(struct iseries_flat_dt *dt) +{ + unsigned char buf[32]; + unsigned char *p; + unsigned int i, index; + struct IoHriProcessorVpd *d; + + /* yuck */ + snprintf(buf, 32, "PowerPC,%s", cur_cpu_spec->cpu_name); + p = strchr(buf, ' '); + if (!p) p = buf + strlen(buf); + + dt_start_node(dt, "cpus"); + dt_prop_u32(dt, "#address-cells", 1); + dt_prop_u32(dt, "#size-cells", 0); + + for (i = 0; i < NR_CPUS; i++) { + if (paca[i].lppaca.dyn_proc_status >= 2) + continue; + + snprintf(p, 32 - (p - buf), "@%d", i); + dt_start_node(dt, buf); + + dt_prop_str(dt, "device_type", "cpu"); + + index = paca[i].lppaca.dyn_hv_phys_proc_index; + d = &xIoHriProcessorVpd[index]; + + dt_prop_u32(dt, "i-cache-size", d->xInstCacheSize * 1024); + dt_prop_u32(dt, "i-cache-line-size", d->xInstCacheOperandSize); + + dt_prop_u32(dt, "d-cache-size", d->xDataL1CacheSizeKB * 1024); + dt_prop_u32(dt, "d-cache-line-size", d->xDataCacheOperandSize); + + /* magic conversions to Hz copied from old code */ + dt_prop_u32(dt, "clock-frequency", + ((1UL << 34) * 1000000) / d->xProcFreq); + dt_prop_u32(dt, "timebase-frequency", + ((1UL << 32) * 1000000) / d->xTimeBaseFreq); + + dt_prop_u32(dt, "reg", i); + + dt_end_node(dt); + } + + dt_end_node(dt); +} + +void build_flat_dt(struct iseries_flat_dt *dt) +{ + u64 tmp[2]; + + dt_init(dt); + + dt_start_node(dt, ""); + + dt_prop_u32(dt, "#address-cells", 2); + dt_prop_u32(dt, "#size-cells", 2); + + /* /memory */ + dt_start_node(dt, "memory@0"); + dt_prop_str(dt, "name", "memory"); + dt_prop_str(dt, "device_type", "memory"); + tmp[0] = 0; + tmp[1] = systemcfg->physicalMemorySize; + dt_prop_u64_list(dt, "reg", tmp, 2); + dt_end_node(dt); + + /* /chosen */ + dt_start_node(dt, "chosen"); + dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR); + dt_end_node(dt); + + dt_cpus(dt); + + dt_end_node(dt); + + dt_push_u32(dt, OF_DT_END); +} + +void * __init iSeries_early_setup(void) +{ + iSeries_fixup_klimit(); + + /* + * Initialize the table which translate Linux physical addresses to + * AS/400 absolute addresses + */ + build_iSeries_Memory_Map(); + + build_flat_dt(&iseries_dt); + + return (void *) __pa(&iseries_dt); +} diff --git a/arch/powerpc/platforms/iseries/setup.h b/arch/powerpc/platforms/iseries/setup.h new file mode 100644 index 00000000000..5213044ec41 --- /dev/null +++ b/arch/powerpc/platforms/iseries/setup.h @@ -0,0 +1,24 @@ +/* + * Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com> + * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> + * + * Description: + * Architecture- / platform-specific boot-time initialization code for + * the IBM AS/400 LPAR. Adapted from original code by Grant Erickson and + * code by Gary Thomas, Cort Dougan <cort@cs.nmt.edu>, and Dan Malek + * <dan@netx4.com>. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __ISERIES_SETUP_H__ +#define __ISERIES_SETUP_H__ + +extern unsigned long iSeries_get_boot_time(void); +extern int iSeries_set_rtc_time(struct rtc_time *tm); +extern void iSeries_get_rtc_time(struct rtc_time *tm); + +#endif /* __ISERIES_SETUP_H__ */ diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c new file mode 100644 index 00000000000..f720916682f --- /dev/null +++ b/arch/powerpc/platforms/iseries/smp.c @@ -0,0 +1,121 @@ +/* + * SMP support for iSeries machines. + * + * Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * + * Plus various changes from other IBM teams... + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <linux/err.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/paca.h> +#include <asm/iSeries/HvCall.h> +#include <asm/time.h> +#include <asm/ppcdebug.h> +#include <asm/machdep.h> +#include <asm/cputable.h> +#include <asm/system.h> + +static unsigned long iSeries_smp_message[NR_CPUS]; + +void iSeries_smp_message_recv(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + int msg; + + if (num_online_cpus() < 2) + return; + + for (msg = 0; msg < 4; msg++) + if (test_and_clear_bit(msg, &iSeries_smp_message[cpu])) + smp_message_recv(msg, regs); +} + +static inline void smp_iSeries_do_message(int cpu, int msg) +{ + set_bit(msg, &iSeries_smp_message[cpu]); + HvCall_sendIPI(&(paca[cpu])); +} + +static void smp_iSeries_message_pass(int target, int msg) +{ + int i; + + if (target < NR_CPUS) + smp_iSeries_do_message(target, msg); + else { + for_each_online_cpu(i) { + if ((target == MSG_ALL_BUT_SELF) && + (i == smp_processor_id())) + continue; + smp_iSeries_do_message(i, msg); + } + } +} + +static int smp_iSeries_probe(void) +{ + return cpus_weight(cpu_possible_map); +} + +static void smp_iSeries_kick_cpu(int nr) +{ + BUG_ON((nr < 0) || (nr >= NR_CPUS)); + + /* Verify that our partition has a processor nr */ + if (paca[nr].lppaca.dyn_proc_status >= 2) + return; + + /* The processor is currently spinning, waiting + * for the cpu_start field to become non-zero + * After we set cpu_start, the processor will + * continue on to secondary_start in iSeries_head.S + */ + paca[nr].cpu_start = 1; +} + +static void __devinit smp_iSeries_setup_cpu(int nr) +{ +} + +static struct smp_ops_t iSeries_smp_ops = { + .message_pass = smp_iSeries_message_pass, + .probe = smp_iSeries_probe, + .kick_cpu = smp_iSeries_kick_cpu, + .setup_cpu = smp_iSeries_setup_cpu, +}; + +/* This is called very early. */ +void __init smp_init_iSeries(void) +{ + smp_ops = &iSeries_smp_ops; +} diff --git a/arch/powerpc/platforms/iseries/spcomm_area.h b/arch/powerpc/platforms/iseries/spcomm_area.h new file mode 100644 index 00000000000..6e3b685115c --- /dev/null +++ b/arch/powerpc/platforms/iseries/spcomm_area.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ISERIES_SPCOMM_AREA_H +#define _ISERIES_SPCOMM_AREA_H + + +struct SpCommArea { + u32 xDesc; // Descriptor (only in new formats) 000-003 + u8 xFormat; // Format (only in new formats) 004-004 + u8 xRsvd1[11]; // Reserved 005-00F + u64 xRawTbAtIplStart; // Raw HW TB value when IPL is started 010-017 + u64 xRawTodAtIplStart; // Raw HW TOD value when IPL is started 018-01F + u64 xBcdTimeAtIplStart; // BCD time when IPL is started 020-027 + u64 xBcdTimeAtOsStart; // BCD time when OS passed control 028-02F + u8 xRsvd2[80]; // Reserved 030-07F +}; + +extern struct SpCommArea xSpCommArea; + +#endif /* _ISERIES_SPCOMM_AREA_H */ diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c new file mode 100644 index 00000000000..c0f7d2e9153 --- /dev/null +++ b/arch/powerpc/platforms/iseries/vio.c @@ -0,0 +1,156 @@ +/* + * IBM PowerPC iSeries Virtual I/O Infrastructure Support. + * + * Copyright (c) 2005 Stephen Rothwell, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/types.h> +#include <linux/device.h> +#include <linux/init.h> + +#include <asm/vio.h> +#include <asm/iommu.h> +#include <asm/tce.h> +#include <asm/abs_addr.h> +#include <asm/page.h> +#include <asm/iSeries/vio.h> +#include <asm/iSeries/HvTypes.h> +#include <asm/iSeries/HvLpConfig.h> +#include <asm/iSeries/HvCallXm.h> + +struct device *iSeries_vio_dev = &vio_bus_device.dev; +EXPORT_SYMBOL(iSeries_vio_dev); + +static struct iommu_table veth_iommu_table; +static struct iommu_table vio_iommu_table; + +static void __init iommu_vio_init(void) +{ + struct iommu_table *t; + struct iommu_table_cb cb; + unsigned long cbp; + unsigned long itc_entries; + + cb.itc_busno = 255; /* Bus 255 is the virtual bus */ + cb.itc_virtbus = 0xff; /* Ask for virtual bus */ + + cbp = virt_to_abs(&cb); + HvCallXm_getTceTableParms(cbp); + + itc_entries = cb.itc_size * PAGE_SIZE / sizeof(union tce_entry); + veth_iommu_table.it_size = itc_entries / 2; + veth_iommu_table.it_busno = cb.itc_busno; + veth_iommu_table.it_offset = cb.itc_offset; + veth_iommu_table.it_index = cb.itc_index; + veth_iommu_table.it_type = TCE_VB; + veth_iommu_table.it_blocksize = 1; + + t = iommu_init_table(&veth_iommu_table); + + if (!t) + printk("Virtual Bus VETH TCE table failed.\n"); + + vio_iommu_table.it_size = itc_entries - veth_iommu_table.it_size; + vio_iommu_table.it_busno = cb.itc_busno; + vio_iommu_table.it_offset = cb.itc_offset + + veth_iommu_table.it_size; + vio_iommu_table.it_index = cb.itc_index; + vio_iommu_table.it_type = TCE_VB; + vio_iommu_table.it_blocksize = 1; + + t = iommu_init_table(&vio_iommu_table); + + if (!t) + printk("Virtual Bus VIO TCE table failed.\n"); +} + +/** + * vio_register_device_iseries: - Register a new iSeries vio device. + * @voidev: The device to register. + */ +static struct vio_dev *__init vio_register_device_iseries(char *type, + uint32_t unit_num) +{ + struct vio_dev *viodev; + + /* allocate a vio_dev for this device */ + viodev = kmalloc(sizeof(struct vio_dev), GFP_KERNEL); + if (!viodev) + return NULL; + memset(viodev, 0, sizeof(struct vio_dev)); + + snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%s%d", type, unit_num); + + viodev->name = viodev->dev.bus_id; + viodev->type = type; + viodev->unit_address = unit_num; + viodev->iommu_table = &vio_iommu_table; + if (vio_register_device(viodev) == NULL) { + kfree(viodev); + return NULL; + } + return viodev; +} + +void __init probe_bus_iseries(void) +{ + HvLpIndexMap vlan_map; + struct vio_dev *viodev; + int i; + + /* there is only one of each of these */ + vio_register_device_iseries("viocons", 0); + vio_register_device_iseries("vscsi", 0); + + vlan_map = HvLpConfig_getVirtualLanIndexMap(); + for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) { + if ((vlan_map & (0x8000 >> i)) == 0) + continue; + viodev = vio_register_device_iseries("vlan", i); + /* veth is special and has it own iommu_table */ + viodev->iommu_table = &veth_iommu_table; + } + for (i = 0; i < HVMAXARCHITECTEDVIRTUALDISKS; i++) + vio_register_device_iseries("viodasd", i); + for (i = 0; i < HVMAXARCHITECTEDVIRTUALCDROMS; i++) + vio_register_device_iseries("viocd", i); + for (i = 0; i < HVMAXARCHITECTEDVIRTUALTAPES; i++) + vio_register_device_iseries("viotape", i); +} + +/** + * vio_match_device_iseries: - Tell if a iSeries VIO device matches a + * vio_device_id + */ +static int vio_match_device_iseries(const struct vio_device_id *id, + const struct vio_dev *dev) +{ + return strncmp(dev->type, id->type, strlen(id->type)) == 0; +} + +static struct vio_bus_ops vio_bus_ops_iseries = { + .match = vio_match_device_iseries, +}; + +/** + * vio_bus_init_iseries: - Initialize the iSeries virtual IO bus + */ +static int __init vio_bus_init_iseries(void) +{ + int err; + + err = vio_bus_init(&vio_bus_ops_iseries); + if (err == 0) { + iommu_vio_init(); + vio_bus_device.iommu_table = &vio_iommu_table; + iSeries_vio_dev = &vio_bus_device.dev; + probe_bus_iseries(); + } + return err; +} + +__initcall(vio_bus_init_iseries); diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c new file mode 100644 index 00000000000..c0c767bd37f --- /dev/null +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -0,0 +1,672 @@ +/* -*- linux-c -*- + * + * iSeries Virtual I/O Message Path code + * + * Authors: Dave Boutcher <boutcher@us.ibm.com> + * Ryan Arnold <ryanarn@us.ibm.com> + * Colin Devilbiss <devilbis@us.ibm.com> + * + * (C) Copyright 2000-2005 IBM Corporation + * + * This code is used by the iSeries virtual disk, cd, + * tape, and console to communicate with OS/400 in another + * partition. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) anyu later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/vmalloc.h> +#include <linux/string.h> +#include <linux/proc_fs.h> +#include <linux/dma-mapping.h> +#include <linux/wait.h> +#include <linux/seq_file.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> + +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/iSeries/HvTypes.h> +#include <asm/iSeries/ItExtVpdPanel.h> +#include <asm/iSeries/HvLpEvent.h> +#include <asm/iSeries/HvLpConfig.h> +#include <asm/iSeries/mf.h> +#include <asm/iSeries/vio.h> + +/* Status of the path to each other partition in the system. + * This is overkill, since we will only ever establish connections + * to our hosting partition and the primary partition on the system. + * But this allows for other support in the future. + */ +static struct viopathStatus { + int isOpen; /* Did we open the path? */ + int isActive; /* Do we have a mon msg outstanding */ + int users[VIO_MAX_SUBTYPES]; + HvLpInstanceId mSourceInst; + HvLpInstanceId mTargetInst; + int numberAllocated; +} viopathStatus[HVMAXARCHITECTEDLPS]; + +static DEFINE_SPINLOCK(statuslock); + +/* + * For each kind of event we allocate a buffer that is + * guaranteed not to cross a page boundary + */ +static unsigned char event_buffer[VIO_MAX_SUBTYPES * 256] __page_aligned; +static atomic_t event_buffer_available[VIO_MAX_SUBTYPES]; +static int event_buffer_initialised; + +static void handleMonitorEvent(struct HvLpEvent *event); + +/* + * We use this structure to handle asynchronous responses. The caller + * blocks on the semaphore and the handler posts the semaphore. However, + * if system_state is not SYSTEM_RUNNING, then wait_atomic is used ... + */ +struct alloc_parms { + struct semaphore sem; + int number; + atomic_t wait_atomic; + int used_wait_atomic; +}; + +/* Put a sequence number in each mon msg. The value is not + * important. Start at something other than 0 just for + * readability. wrapping this is ok. + */ +static u8 viomonseq = 22; + +/* Our hosting logical partition. We get this at startup + * time, and different modules access this variable directly. + */ +HvLpIndex viopath_hostLp = HvLpIndexInvalid; +EXPORT_SYMBOL(viopath_hostLp); +HvLpIndex viopath_ourLp = HvLpIndexInvalid; +EXPORT_SYMBOL(viopath_ourLp); + +/* For each kind of incoming event we set a pointer to a + * routine to call. + */ +static vio_event_handler_t *vio_handler[VIO_MAX_SUBTYPES]; + +#define VIOPATH_KERN_WARN KERN_WARNING "viopath: " +#define VIOPATH_KERN_INFO KERN_INFO "viopath: " + +static int proc_viopath_show(struct seq_file *m, void *v) +{ + char *buf; + u16 vlanMap; + dma_addr_t handle; + HvLpEvent_Rc hvrc; + DECLARE_MUTEX_LOCKED(Semaphore); + + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!buf) + return 0; + memset(buf, 0, PAGE_SIZE); + + handle = dma_map_single(iSeries_vio_dev, buf, PAGE_SIZE, + DMA_FROM_DEVICE); + + hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, + HvLpEvent_Type_VirtualIo, + viomajorsubtype_config | vioconfigget, + HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, + viopath_sourceinst(viopath_hostLp), + viopath_targetinst(viopath_hostLp), + (u64)(unsigned long)&Semaphore, VIOVERSION << 16, + ((u64)handle) << 32, PAGE_SIZE, 0, 0); + + if (hvrc != HvLpEvent_Rc_Good) + printk(VIOPATH_KERN_WARN "hv error on op %d\n", (int)hvrc); + + down(&Semaphore); + + vlanMap = HvLpConfig_getVirtualLanIndexMap(); + + buf[PAGE_SIZE-1] = '\0'; + seq_printf(m, "%s", buf); + seq_printf(m, "AVAILABLE_VETH=%x\n", vlanMap); + seq_printf(m, "SRLNBR=%c%c%c%c%c%c%c\n", + e2a(xItExtVpdPanel.mfgID[2]), + e2a(xItExtVpdPanel.mfgID[3]), + e2a(xItExtVpdPanel.systemSerial[1]), + e2a(xItExtVpdPanel.systemSerial[2]), + e2a(xItExtVpdPanel.systemSerial[3]), + e2a(xItExtVpdPanel.systemSerial[4]), + e2a(xItExtVpdPanel.systemSerial[5])); + + dma_unmap_single(iSeries_vio_dev, handle, PAGE_SIZE, DMA_FROM_DEVICE); + kfree(buf); + + return 0; +} + +static int proc_viopath_open(struct inode *inode, struct file *file) +{ + return single_open(file, proc_viopath_show, NULL); +} + +static struct file_operations proc_viopath_operations = { + .open = proc_viopath_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init vio_proc_init(void) +{ + struct proc_dir_entry *e; + + e = create_proc_entry("iSeries/config", 0, NULL); + if (e) + e->proc_fops = &proc_viopath_operations; + + return 0; +} +__initcall(vio_proc_init); + +/* See if a given LP is active. Allow for invalid lps to be passed in + * and just return invalid + */ +int viopath_isactive(HvLpIndex lp) +{ + if (lp == HvLpIndexInvalid) + return 0; + if (lp < HVMAXARCHITECTEDLPS) + return viopathStatus[lp].isActive; + else + return 0; +} +EXPORT_SYMBOL(viopath_isactive); + +/* + * We cache the source and target instance ids for each + * partition. + */ +HvLpInstanceId viopath_sourceinst(HvLpIndex lp) +{ + return viopathStatus[lp].mSourceInst; +} +EXPORT_SYMBOL(viopath_sourceinst); + +HvLpInstanceId viopath_targetinst(HvLpIndex lp) +{ + return viopathStatus[lp].mTargetInst; +} +EXPORT_SYMBOL(viopath_targetinst); + +/* + * Send a monitor message. This is a message with the acknowledge + * bit on that the other side will NOT explicitly acknowledge. When + * the other side goes down, the hypervisor will acknowledge any + * outstanding messages....so we will know when the other side dies. + */ +static void sendMonMsg(HvLpIndex remoteLp) +{ + HvLpEvent_Rc hvrc; + + viopathStatus[remoteLp].mSourceInst = + HvCallEvent_getSourceLpInstanceId(remoteLp, + HvLpEvent_Type_VirtualIo); + viopathStatus[remoteLp].mTargetInst = + HvCallEvent_getTargetLpInstanceId(remoteLp, + HvLpEvent_Type_VirtualIo); + + /* + * Deliberately ignore the return code here. if we call this + * more than once, we don't care. + */ + vio_setHandler(viomajorsubtype_monitor, handleMonitorEvent); + + hvrc = HvCallEvent_signalLpEventFast(remoteLp, HvLpEvent_Type_VirtualIo, + viomajorsubtype_monitor, HvLpEvent_AckInd_DoAck, + HvLpEvent_AckType_DeferredAck, + viopathStatus[remoteLp].mSourceInst, + viopathStatus[remoteLp].mTargetInst, + viomonseq++, 0, 0, 0, 0, 0); + + if (hvrc == HvLpEvent_Rc_Good) + viopathStatus[remoteLp].isActive = 1; + else { + printk(VIOPATH_KERN_WARN "could not connect to partition %d\n", + remoteLp); + viopathStatus[remoteLp].isActive = 0; + } +} + +static void handleMonitorEvent(struct HvLpEvent *event) +{ + HvLpIndex remoteLp; + int i; + + /* + * This handler is _also_ called as part of the loop + * at the end of this routine, so it must be able to + * ignore NULL events... + */ + if (!event) + return; + + /* + * First see if this is just a normal monitor message from the + * other partition + */ + if (event->xFlags.xFunction == HvLpEvent_Function_Int) { + remoteLp = event->xSourceLp; + if (!viopathStatus[remoteLp].isActive) + sendMonMsg(remoteLp); + return; + } + + /* + * This path is for an acknowledgement; the other partition + * died + */ + remoteLp = event->xTargetLp; + if ((event->xSourceInstanceId != viopathStatus[remoteLp].mSourceInst) || + (event->xTargetInstanceId != viopathStatus[remoteLp].mTargetInst)) { + printk(VIOPATH_KERN_WARN "ignoring ack....mismatched instances\n"); + return; + } + + printk(VIOPATH_KERN_WARN "partition %d ended\n", remoteLp); + + viopathStatus[remoteLp].isActive = 0; + + /* + * For each active handler, pass them a NULL + * message to indicate that the other partition + * died + */ + for (i = 0; i < VIO_MAX_SUBTYPES; i++) { + if (vio_handler[i] != NULL) + (*vio_handler[i])(NULL); + } +} + +int vio_setHandler(int subtype, vio_event_handler_t *beh) +{ + subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; + if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) + return -EINVAL; + if (vio_handler[subtype] != NULL) + return -EBUSY; + vio_handler[subtype] = beh; + return 0; +} +EXPORT_SYMBOL(vio_setHandler); + +int vio_clearHandler(int subtype) +{ + subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; + if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) + return -EINVAL; + if (vio_handler[subtype] == NULL) + return -EAGAIN; + vio_handler[subtype] = NULL; + return 0; +} +EXPORT_SYMBOL(vio_clearHandler); + +static void handleConfig(struct HvLpEvent *event) +{ + if (!event) + return; + if (event->xFlags.xFunction == HvLpEvent_Function_Int) { + printk(VIOPATH_KERN_WARN + "unexpected config request from partition %d", + event->xSourceLp); + + if ((event->xFlags.xFunction == HvLpEvent_Function_Int) && + (event->xFlags.xAckInd == HvLpEvent_AckInd_DoAck)) { + event->xRc = HvLpEvent_Rc_InvalidSubtype; + HvCallEvent_ackLpEvent(event); + } + return; + } + + up((struct semaphore *)event->xCorrelationToken); +} + +/* + * Initialization of the hosting partition + */ +void vio_set_hostlp(void) +{ + /* + * If this has already been set then we DON'T want to either change + * it or re-register the proc file system + */ + if (viopath_hostLp != HvLpIndexInvalid) + return; + + /* + * Figure out our hosting partition. This isn't allowed to change + * while we're active + */ + viopath_ourLp = HvLpConfig_getLpIndex(); + viopath_hostLp = HvLpConfig_getHostingLpIndex(viopath_ourLp); + + if (viopath_hostLp != HvLpIndexInvalid) + vio_setHandler(viomajorsubtype_config, handleConfig); +} +EXPORT_SYMBOL(vio_set_hostlp); + +static void vio_handleEvent(struct HvLpEvent *event, struct pt_regs *regs) +{ + HvLpIndex remoteLp; + int subtype = (event->xSubtype & VIOMAJOR_SUBTYPE_MASK) + >> VIOMAJOR_SUBTYPE_SHIFT; + + if (event->xFlags.xFunction == HvLpEvent_Function_Int) { + remoteLp = event->xSourceLp; + /* + * The isActive is checked because if the hosting partition + * went down and came back up it would not be active but it + * would have different source and target instances, in which + * case we'd want to reset them. This case really protects + * against an unauthorized active partition sending interrupts + * or acks to this linux partition. + */ + if (viopathStatus[remoteLp].isActive + && (event->xSourceInstanceId != + viopathStatus[remoteLp].mTargetInst)) { + printk(VIOPATH_KERN_WARN + "message from invalid partition. " + "int msg rcvd, source inst (%d) doesnt match (%d)\n", + viopathStatus[remoteLp].mTargetInst, + event->xSourceInstanceId); + return; + } + + if (viopathStatus[remoteLp].isActive + && (event->xTargetInstanceId != + viopathStatus[remoteLp].mSourceInst)) { + printk(VIOPATH_KERN_WARN + "message from invalid partition. " + "int msg rcvd, target inst (%d) doesnt match (%d)\n", + viopathStatus[remoteLp].mSourceInst, + event->xTargetInstanceId); + return; + } + } else { + remoteLp = event->xTargetLp; + if (event->xSourceInstanceId != + viopathStatus[remoteLp].mSourceInst) { + printk(VIOPATH_KERN_WARN + "message from invalid partition. " + "ack msg rcvd, source inst (%d) doesnt match (%d)\n", + viopathStatus[remoteLp].mSourceInst, + event->xSourceInstanceId); + return; + } + + if (event->xTargetInstanceId != + viopathStatus[remoteLp].mTargetInst) { + printk(VIOPATH_KERN_WARN + "message from invalid partition. " + "viopath: ack msg rcvd, target inst (%d) doesnt match (%d)\n", + viopathStatus[remoteLp].mTargetInst, + event->xTargetInstanceId); + return; + } + } + + if (vio_handler[subtype] == NULL) { + printk(VIOPATH_KERN_WARN + "unexpected virtual io event subtype %d from partition %d\n", + event->xSubtype, remoteLp); + /* No handler. Ack if necessary */ + if ((event->xFlags.xFunction == HvLpEvent_Function_Int) && + (event->xFlags.xAckInd == HvLpEvent_AckInd_DoAck)) { + event->xRc = HvLpEvent_Rc_InvalidSubtype; + HvCallEvent_ackLpEvent(event); + } + return; + } + + /* This innocuous little line is where all the real work happens */ + (*vio_handler[subtype])(event); +} + +static void viopath_donealloc(void *parm, int number) +{ + struct alloc_parms *parmsp = parm; + + parmsp->number = number; + if (parmsp->used_wait_atomic) + atomic_set(&parmsp->wait_atomic, 0); + else + up(&parmsp->sem); +} + +static int allocateEvents(HvLpIndex remoteLp, int numEvents) +{ + struct alloc_parms parms; + + if (system_state != SYSTEM_RUNNING) { + parms.used_wait_atomic = 1; + atomic_set(&parms.wait_atomic, 1); + } else { + parms.used_wait_atomic = 0; + init_MUTEX_LOCKED(&parms.sem); + } + mf_allocate_lp_events(remoteLp, HvLpEvent_Type_VirtualIo, 250, /* It would be nice to put a real number here! */ + numEvents, &viopath_donealloc, &parms); + if (system_state != SYSTEM_RUNNING) { + while (atomic_read(&parms.wait_atomic)) + mb(); + } else + down(&parms.sem); + return parms.number; +} + +int viopath_open(HvLpIndex remoteLp, int subtype, int numReq) +{ + int i; + unsigned long flags; + int tempNumAllocated; + + if ((remoteLp >= HVMAXARCHITECTEDLPS) || (remoteLp == HvLpIndexInvalid)) + return -EINVAL; + + subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; + if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) + return -EINVAL; + + spin_lock_irqsave(&statuslock, flags); + + if (!event_buffer_initialised) { + for (i = 0; i < VIO_MAX_SUBTYPES; i++) + atomic_set(&event_buffer_available[i], 1); + event_buffer_initialised = 1; + } + + viopathStatus[remoteLp].users[subtype]++; + + if (!viopathStatus[remoteLp].isOpen) { + viopathStatus[remoteLp].isOpen = 1; + HvCallEvent_openLpEventPath(remoteLp, HvLpEvent_Type_VirtualIo); + + /* + * Don't hold the spinlock during an operation that + * can sleep. + */ + spin_unlock_irqrestore(&statuslock, flags); + tempNumAllocated = allocateEvents(remoteLp, 1); + spin_lock_irqsave(&statuslock, flags); + + viopathStatus[remoteLp].numberAllocated += tempNumAllocated; + + if (viopathStatus[remoteLp].numberAllocated == 0) { + HvCallEvent_closeLpEventPath(remoteLp, + HvLpEvent_Type_VirtualIo); + + spin_unlock_irqrestore(&statuslock, flags); + return -ENOMEM; + } + + viopathStatus[remoteLp].mSourceInst = + HvCallEvent_getSourceLpInstanceId(remoteLp, + HvLpEvent_Type_VirtualIo); + viopathStatus[remoteLp].mTargetInst = + HvCallEvent_getTargetLpInstanceId(remoteLp, + HvLpEvent_Type_VirtualIo); + HvLpEvent_registerHandler(HvLpEvent_Type_VirtualIo, + &vio_handleEvent); + sendMonMsg(remoteLp); + printk(VIOPATH_KERN_INFO "opening connection to partition %d, " + "setting sinst %d, tinst %d\n", + remoteLp, viopathStatus[remoteLp].mSourceInst, + viopathStatus[remoteLp].mTargetInst); + } + + spin_unlock_irqrestore(&statuslock, flags); + tempNumAllocated = allocateEvents(remoteLp, numReq); + spin_lock_irqsave(&statuslock, flags); + viopathStatus[remoteLp].numberAllocated += tempNumAllocated; + spin_unlock_irqrestore(&statuslock, flags); + + return 0; +} +EXPORT_SYMBOL(viopath_open); + +int viopath_close(HvLpIndex remoteLp, int subtype, int numReq) +{ + unsigned long flags; + int i; + int numOpen; + struct alloc_parms parms; + + if ((remoteLp >= HVMAXARCHITECTEDLPS) || (remoteLp == HvLpIndexInvalid)) + return -EINVAL; + + subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; + if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) + return -EINVAL; + + spin_lock_irqsave(&statuslock, flags); + /* + * If the viopath_close somehow gets called before a + * viopath_open it could decrement to -1 which is a non + * recoverable state so we'll prevent this from + * happening. + */ + if (viopathStatus[remoteLp].users[subtype] > 0) + viopathStatus[remoteLp].users[subtype]--; + + spin_unlock_irqrestore(&statuslock, flags); + + parms.used_wait_atomic = 0; + init_MUTEX_LOCKED(&parms.sem); + mf_deallocate_lp_events(remoteLp, HvLpEvent_Type_VirtualIo, + numReq, &viopath_donealloc, &parms); + down(&parms.sem); + + spin_lock_irqsave(&statuslock, flags); + for (i = 0, numOpen = 0; i < VIO_MAX_SUBTYPES; i++) + numOpen += viopathStatus[remoteLp].users[i]; + + if ((viopathStatus[remoteLp].isOpen) && (numOpen == 0)) { + printk(VIOPATH_KERN_INFO "closing connection to partition %d", + remoteLp); + + HvCallEvent_closeLpEventPath(remoteLp, + HvLpEvent_Type_VirtualIo); + viopathStatus[remoteLp].isOpen = 0; + viopathStatus[remoteLp].isActive = 0; + + for (i = 0; i < VIO_MAX_SUBTYPES; i++) + atomic_set(&event_buffer_available[i], 0); + event_buffer_initialised = 0; + } + spin_unlock_irqrestore(&statuslock, flags); + return 0; +} +EXPORT_SYMBOL(viopath_close); + +void *vio_get_event_buffer(int subtype) +{ + subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; + if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) + return NULL; + + if (atomic_dec_if_positive(&event_buffer_available[subtype]) == 0) + return &event_buffer[subtype * 256]; + else + return NULL; +} +EXPORT_SYMBOL(vio_get_event_buffer); + +void vio_free_event_buffer(int subtype, void *buffer) +{ + subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; + if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) { + printk(VIOPATH_KERN_WARN + "unexpected subtype %d freeing event buffer\n", subtype); + return; + } + + if (atomic_read(&event_buffer_available[subtype]) != 0) { + printk(VIOPATH_KERN_WARN + "freeing unallocated event buffer, subtype %d\n", + subtype); + return; + } + + if (buffer != &event_buffer[subtype * 256]) { + printk(VIOPATH_KERN_WARN + "freeing invalid event buffer, subtype %d\n", subtype); + } + + atomic_set(&event_buffer_available[subtype], 1); +} +EXPORT_SYMBOL(vio_free_event_buffer); + +static const struct vio_error_entry vio_no_error = + { 0, 0, "Non-VIO Error" }; +static const struct vio_error_entry vio_unknown_error = + { 0, EIO, "Unknown Error" }; + +static const struct vio_error_entry vio_default_errors[] = { + {0x0001, EIO, "No Connection"}, + {0x0002, EIO, "No Receiver"}, + {0x0003, EIO, "No Buffer Available"}, + {0x0004, EBADRQC, "Invalid Message Type"}, + {0x0000, 0, NULL}, +}; + +const struct vio_error_entry *vio_lookup_rc( + const struct vio_error_entry *local_table, u16 rc) +{ + const struct vio_error_entry *cur; + + if (!rc) + return &vio_no_error; + if (local_table) + for (cur = local_table; cur->rc; ++cur) + if (cur->rc == rc) + return cur; + for (cur = vio_default_errors; cur->rc; ++cur) + if (cur->rc == rc) + return cur; + return &vio_unknown_error; +} +EXPORT_SYMBOL(vio_lookup_rc); diff --git a/arch/powerpc/platforms/iseries/vpd_areas.h b/arch/powerpc/platforms/iseries/vpd_areas.h new file mode 100644 index 00000000000..601e6dd860e --- /dev/null +++ b/arch/powerpc/platforms/iseries/vpd_areas.h @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2001 Mike Corrigan IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ISERIES_VPD_AREAS_H +#define _ISERIES_VPD_AREAS_H + +/* + * This file defines the address and length of all of the VPD area passed to + * the OS from PLIC (most of which start from the SP). + */ + +#include <asm/types.h> + +/* VPD Entry index is carved in stone - cannot be changed (easily). */ +#define ItVpdCecVpd 0 +#define ItVpdDynamicSpace 1 +#define ItVpdExtVpd 2 +#define ItVpdExtVpdOnPanel 3 +#define ItVpdFirstPaca 4 +#define ItVpdIoVpd 5 +#define ItVpdIplParms 6 +#define ItVpdMsVpd 7 +#define ItVpdPanelVpd 8 +#define ItVpdLpNaca 9 +#define ItVpdBackplaneAndMaybeClockCardVpd 10 +#define ItVpdRecoveryLogBuffer 11 +#define ItVpdSpCommArea 12 +#define ItVpdSpLogBuffer 13 +#define ItVpdSpLogBufferSave 14 +#define ItVpdSpCardVpd 15 +#define ItVpdFirstProcVpd 16 +#define ItVpdApModelVpd 17 +#define ItVpdClockCardVpd 18 +#define ItVpdBusExtCardVpd 19 +#define ItVpdProcCapacityVpd 20 +#define ItVpdInteractiveCapacityVpd 21 +#define ItVpdFirstSlotLabel 22 +#define ItVpdFirstLpQueue 23 +#define ItVpdFirstL3CacheVpd 24 +#define ItVpdFirstProcFruVpd 25 + +#define ItVpdMaxEntries 26 + +#define ItDmaMaxEntries 10 + +#define ItVpdAreasMaxSlotLabels 192 + + +struct ItVpdAreas { + u32 xSlicDesc; // Descriptor 000-003 + u16 xSlicSize; // Size of this control block 004-005 + u16 xPlicAdjustVpdLens:1; // Flag to indicate new interface006-007 + u16 xRsvd1:15; // Reserved bits ... + u16 xSlicVpdEntries; // Number of VPD entries 008-009 + u16 xSlicDmaEntries; // Number of DMA entries 00A-00B + u16 xSlicMaxLogicalProcs; // Maximum logical processors 00C-00D + u16 xSlicMaxPhysicalProcs; // Maximum physical processors 00E-00F + u16 xSlicDmaToksOffset; // Offset into this of array 010-011 + u16 xSlicVpdAdrsOffset; // Offset into this of array 012-013 + u16 xSlicDmaLensOffset; // Offset into this of array 014-015 + u16 xSlicVpdLensOffset; // Offset into this of array 016-017 + u16 xSlicMaxSlotLabels; // Maximum number of slot labels018-019 + u16 xSlicMaxLpQueues; // Maximum number of LP Queues 01A-01B + u8 xRsvd2[4]; // Reserved 01C-01F + u64 xRsvd3[12]; // Reserved 020-07F + u32 xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths 080-0A7 + u32 xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens 0A8-0CF + u32 xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths 0D0-12F + void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF +}; + +extern struct ItVpdAreas itVpdAreas; + +#endif /* _ISERIES_VPD_AREAS_H */ diff --git a/arch/powerpc/platforms/iseries/vpdinfo.c b/arch/powerpc/platforms/iseries/vpdinfo.c new file mode 100644 index 00000000000..9c318849dee --- /dev/null +++ b/arch/powerpc/platforms/iseries/vpdinfo.c @@ -0,0 +1,271 @@ +/* + * This code gets the card location of the hardware + * Copyright (C) 2001 <Allan H Trautman> <IBM Corp> + * Copyright (C) 2005 Stephen Rothwel, IBM Corp + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + * + * Change Activity: + * Created, Feb 2, 2001 + * Ported to ppc64, August 20, 2001 + * End Change Activity + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> + +#include <asm/types.h> +#include <asm/resource.h> +#include <asm/abs_addr.h> +#include <asm/pci-bridge.h> +#include <asm/iSeries/HvTypes.h> + +#include "pci.h" +#include "call_pci.h" + +/* + * Size of Bus VPD data + */ +#define BUS_VPDSIZE 1024 + +/* + * Bus Vpd Tags + */ +#define VpdEndOfAreaTag 0x79 +#define VpdIdStringTag 0x82 +#define VpdVendorAreaTag 0x84 + +/* + * Mfg Area Tags + */ +#define VpdFruFrameId 0x4649 // "FI" +#define VpdSlotMapFormat 0x4D46 // "MF" +#define VpdSlotMap 0x534D // "SM" + +/* + * Structures of the areas + */ +struct MfgVpdAreaStruct { + u16 Tag; + u8 TagLength; + u8 AreaData1; + u8 AreaData2; +}; +typedef struct MfgVpdAreaStruct MfgArea; +#define MFG_ENTRY_SIZE 3 + +struct SlotMapStruct { + u8 AgentId; + u8 SecondaryAgentId; + u8 PhbId; + char CardLocation[3]; + char Parms[8]; + char Reserved[2]; +}; +typedef struct SlotMapStruct SlotMap; +#define SLOT_ENTRY_SIZE 16 + +/* + * Parse the Slot Area + */ +static void __init iSeries_Parse_SlotArea(SlotMap *MapPtr, int MapLen, + HvAgentId agent, u8 *PhbId, char card[4]) +{ + int SlotMapLen = MapLen; + SlotMap *SlotMapPtr = MapPtr; + + /* + * Parse Slot label until we find the one requested + */ + while (SlotMapLen > 0) { + if (SlotMapPtr->AgentId == agent) { + /* + * If Phb wasn't found, grab the entry first one found. + */ + if (*PhbId == 0xff) + *PhbId = SlotMapPtr->PhbId; + /* Found it, extract the data. */ + if (SlotMapPtr->PhbId == *PhbId) { + memcpy(card, &SlotMapPtr->CardLocation, 3); + card[3] = 0; + break; + } + } + /* Point to the next Slot */ + SlotMapPtr = (SlotMap *)((char *)SlotMapPtr + SLOT_ENTRY_SIZE); + SlotMapLen -= SLOT_ENTRY_SIZE; + } +} + +/* + * Parse the Mfg Area + */ +static void __init iSeries_Parse_MfgArea(u8 *AreaData, int AreaLen, + HvAgentId agent, u8 *PhbId, + u8 *frame, char card[4]) +{ + MfgArea *MfgAreaPtr = (MfgArea *)AreaData; + int MfgAreaLen = AreaLen; + u16 SlotMapFmt = 0; + + /* Parse Mfg Data */ + while (MfgAreaLen > 0) { + int MfgTagLen = MfgAreaPtr->TagLength; + /* Frame ID (FI 4649020310 ) */ + if (MfgAreaPtr->Tag == VpdFruFrameId) /* FI */ + *frame = MfgAreaPtr->AreaData1; + /* Slot Map Format (MF 4D46020004 ) */ + else if (MfgAreaPtr->Tag == VpdSlotMapFormat) /* MF */ + SlotMapFmt = (MfgAreaPtr->AreaData1 * 256) + + MfgAreaPtr->AreaData2; + /* Slot Map (SM 534D90 */ + else if (MfgAreaPtr->Tag == VpdSlotMap) { /* SM */ + SlotMap *SlotMapPtr; + + if (SlotMapFmt == 0x1004) + SlotMapPtr = (SlotMap *)((char *)MfgAreaPtr + + MFG_ENTRY_SIZE + 1); + else + SlotMapPtr = (SlotMap *)((char *)MfgAreaPtr + + MFG_ENTRY_SIZE); + iSeries_Parse_SlotArea(SlotMapPtr, MfgTagLen, + agent, PhbId, card); + } + /* + * Point to the next Mfg Area + * Use defined size, sizeof give wrong answer + */ + MfgAreaPtr = (MfgArea *)((char *)MfgAreaPtr + MfgTagLen + + MFG_ENTRY_SIZE); + MfgAreaLen -= (MfgTagLen + MFG_ENTRY_SIZE); + } +} + +/* + * Look for "BUS".. Data is not Null terminated. + * PHBID of 0xFF indicates PHB was not found in VPD Data. + */ +static int __init iSeries_Parse_PhbId(u8 *AreaPtr, int AreaLength) +{ + u8 *PhbPtr = AreaPtr; + int DataLen = AreaLength; + char PhbId = 0xFF; + + while (DataLen > 0) { + if ((*PhbPtr == 'B') && (*(PhbPtr + 1) == 'U') + && (*(PhbPtr + 2) == 'S')) { + PhbPtr += 3; + while (*PhbPtr == ' ') + ++PhbPtr; + PhbId = (*PhbPtr & 0x0F); + break; + } + ++PhbPtr; + --DataLen; + } + return PhbId; +} + +/* + * Parse out the VPD Areas + */ +static void __init iSeries_Parse_Vpd(u8 *VpdData, int VpdDataLen, + HvAgentId agent, u8 *frame, char card[4]) +{ + u8 *TagPtr = VpdData; + int DataLen = VpdDataLen - 3; + u8 PhbId; + + while ((*TagPtr != VpdEndOfAreaTag) && (DataLen > 0)) { + int AreaLen = *(TagPtr + 1) + (*(TagPtr + 2) * 256); + u8 *AreaData = TagPtr + 3; + + if (*TagPtr == VpdIdStringTag) + PhbId = iSeries_Parse_PhbId(AreaData, AreaLen); + else if (*TagPtr == VpdVendorAreaTag) + iSeries_Parse_MfgArea(AreaData, AreaLen, + agent, &PhbId, frame, card); + /* Point to next Area. */ + TagPtr = AreaData + AreaLen; + DataLen -= AreaLen; + } +} + +static void __init iSeries_Get_Location_Code(u16 bus, HvAgentId agent, + u8 *frame, char card[4]) +{ + int BusVpdLen = 0; + u8 *BusVpdPtr = kmalloc(BUS_VPDSIZE, GFP_KERNEL); + + if (BusVpdPtr == NULL) { + printk("PCI: Bus VPD Buffer allocation failure.\n"); + return; + } + BusVpdLen = HvCallPci_getBusVpd(bus, iseries_hv_addr(BusVpdPtr), + BUS_VPDSIZE); + if (BusVpdLen == 0) { + printk("PCI: Bus VPD Buffer zero length.\n"); + goto out_free; + } + /* printk("PCI: BusVpdPtr: %p, %d\n",BusVpdPtr, BusVpdLen); */ + /* Make sure this is what I think it is */ + if (*BusVpdPtr != VpdIdStringTag) { /* 0x82 */ + printk("PCI: Bus VPD Buffer missing starting tag.\n"); + goto out_free; + } + iSeries_Parse_Vpd(BusVpdPtr, BusVpdLen, agent, frame, card); +out_free: + kfree(BusVpdPtr); +} + +/* + * Prints the device information. + * - Pass in pci_dev* pointer to the device. + * - Pass in the device count + * + * Format: + * PCI: Bus 0, Device 26, Vendor 0x12AE Frame 1, Card C10 Ethernet + * controller + */ +void __init iSeries_Device_Information(struct pci_dev *PciDev, int count) +{ + struct device_node *DevNode = PciDev->sysdata; + struct pci_dn *pdn; + u16 bus; + u8 frame; + char card[4]; + HvSubBusNumber subbus; + HvAgentId agent; + + if (DevNode == NULL) { + printk("%d. PCI: iSeries_Device_Information DevNode is NULL\n", + count); + return; + } + + pdn = PCI_DN(DevNode); + bus = pdn->busno; + subbus = pdn->bussubno; + agent = ISERIES_PCI_AGENTID(ISERIES_GET_DEVICE_FROM_SUBBUS(subbus), + ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus)); + iSeries_Get_Location_Code(bus, agent, &frame, card); + + printk("%d. PCI: Bus%3d, Device%3d, Vendor %04X Frame%3d, Card %4s ", + count, bus, PCI_SLOT(PciDev->devfn), PciDev->vendor, + frame, card); + printk("0x%04X\n", (int)(PciDev->class >> 8)); +} diff --git a/arch/powerpc/platforms/maple/Makefile b/arch/powerpc/platforms/maple/Makefile new file mode 100644 index 00000000000..1be1a993c5f --- /dev/null +++ b/arch/powerpc/platforms/maple/Makefile @@ -0,0 +1 @@ +obj-y += setup.o pci.o time.o diff --git a/arch/powerpc/platforms/maple/maple.h b/arch/powerpc/platforms/maple/maple.h new file mode 100644 index 00000000000..0657c579b84 --- /dev/null +++ b/arch/powerpc/platforms/maple/maple.h @@ -0,0 +1,12 @@ +/* + * Declarations for maple-specific code. + * + * Maple is the name of a PPC970 evaluation board. + */ +extern int maple_set_rtc_time(struct rtc_time *tm); +extern void maple_get_rtc_time(struct rtc_time *tm); +extern unsigned long maple_get_boot_time(void); +extern void maple_calibrate_decr(void); +extern void maple_pci_init(void); +extern void maple_pcibios_fixup(void); +extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel); diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c new file mode 100644 index 00000000000..340c21caeae --- /dev/null +++ b/arch/powerpc/platforms/maple/pci.c @@ -0,0 +1,522 @@ +/* + * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/iommu.h> +#include <asm/ppc-pci.h> + +#include "maple.h" + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static struct pci_controller *u3_agp, *u3_ht; + +static int __init fixup_one_level_bus_range(struct device_node *node, int higher) +{ + for (; node != 0;node = node->sibling) { + int * bus_range; + unsigned int *class_code; + int len; + + /* For PCI<->PCI bridges or CardBus bridges, we go down */ + class_code = (unsigned int *) get_property(node, "class-code", NULL); + if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + bus_range = (int *) get_property(node, "bus-range", &len); + if (bus_range != NULL && len > 2 * sizeof(int)) { + if (bus_range[1] > higher) + higher = bus_range[1]; + } + higher = fixup_one_level_bus_range(node->child, higher); + } + return higher; +} + +/* This routine fixes the "bus-range" property of all bridges in the + * system since they tend to have their "last" member wrong on macs + * + * Note that the bus numbers manipulated here are OF bus numbers, they + * are not Linux bus numbers. + */ +static void __init fixup_bus_range(struct device_node *bridge) +{ + int * bus_range; + int len; + + /* Lookup the "bus-range" property for the hose */ + bus_range = (int *) get_property(bridge, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s\n", + bridge->full_name); + return; + } + bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); +} + + +#define U3_AGP_CFA0(devfn, off) \ + ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ + | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ + | (((unsigned long)(off)) & 0xFCUL)) + +#define U3_AGP_CFA1(bus, devfn, off) \ + ((((unsigned long)(bus)) << 16) \ + |(((unsigned long)(devfn)) << 8) \ + |(((unsigned long)(off)) & 0xFCUL) \ + |1UL) + +static unsigned long u3_agp_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, u8 offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) { + if (dev_fn < (11 << 3)) + return 0; + caddr = U3_AGP_CFA0(dev_fn, offset); + } else + caddr = U3_AGP_CFA1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= 0x07; + return ((unsigned long)hose->cfg_data) + offset; +} + +static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_agp_pci_ops = +{ + u3_agp_read_config, + u3_agp_write_config +}; + + +#define U3_HT_CFA0(devfn, off) \ + ((((unsigned long)devfn) << 8) | offset) +#define U3_HT_CFA1(bus, devfn, off) \ + (U3_HT_CFA0(devfn, off) \ + + (((unsigned long)bus) << 16) \ + + 0x01000000UL) + +static unsigned long u3_ht_cfg_access(struct pci_controller* hose, + u8 bus, u8 devfn, u8 offset) +{ + if (bus == hose->first_busno) { + if (PCI_SLOT(devfn) == 0) + return 0; + return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); + } else + return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); +} + +static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_ht_pci_ops = +{ + u3_ht_read_config, + u3_ht_write_config +}; + +static void __init setup_u3_agp(struct pci_controller* hose) +{ + /* On G5, we move AGP up to high bus number so we don't need + * to reassign bus numbers for HT. If we ever have P2P bridges + * on AGP, we'll have to move pci_assign_all_buses to the + * pci_controller structure so we enable it for AGP and not for + * HT childs. + * We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->first_busno = 0xf0; + hose->last_busno = 0xff; + hose->ops = &u3_agp_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + u3_agp = hose; +} + +static void __init setup_u3_ht(struct pci_controller* hose) +{ + hose->ops = &u3_ht_pci_ops; + + /* We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + + hose->first_busno = 0; + hose->last_busno = 0xef; + + u3_ht = hose; +} + +static int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + char* disp_name; + int *bus_range; + int primary = 1; + struct property *of_prop; + + DBG("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", + dev->full_name); + } + + hose = alloc_bootmem(sizeof(struct pci_controller)); + if (hose == NULL) + return -ENOMEM; + pci_setup_pci_controller(hose); + + hose->arch_data = dev; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + of_prop = alloc_bootmem(sizeof(struct property) + + sizeof(hose->global_number)); + if (of_prop) { + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(hose->global_number); + of_prop->value = (unsigned char *)&of_prop[1]; + memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); + prom_add_property(dev, of_prop); + } + + disp_name = NULL; + if (device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose); + disp_name = "U3-AGP"; + primary = 0; + } else if (device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose); + disp_name = "U3-HT"; + primary = 1; + } + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", + disp_name, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + pci_setup_phb_io(hose, primary); + + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); + + return 0; +} + + +void __init maple_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + DBG(" -> maple_pcibios_fixup\n"); + + for_each_pci_dev(dev) + pci_read_irq_line(dev); + + /* Do the mapping of the IO space */ + phbs_remap_io(); + + DBG(" <- maple_pcibios_fixup\n"); +} + +static void __init maple_fixup_phb_resources(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; + hose->io_resource.start += offset; + hose->io_resource.end += offset; + printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", + hose->global_number, + hose->io_resource.start, hose->io_resource.end); + } +} + +void __init maple_pci_init(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + /* Probe root PCI hosts, that is on U3 the AGP host and the + * HyperTransport host. That one is actually "kept" around + * and actually added last as it's resource management relies + * on the AGP resources to have been setup first + */ + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n"); + return; + } + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { + if (np->name == NULL) + continue; + if (strcmp(np->name, "pci") == 0) { + if (add_bridge(np) == 0) + of_node_get(np); + } + if (strcmp(np->name, "ht") == 0) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + + /* Now setup the HyperTransport host if we found any + */ + if (ht && add_bridge(ht) != 0) + of_node_put(ht); + + /* Fixup the IO resources on our host bridges as the common code + * does it only for childs of the host bridges + */ + maple_fixup_phb_resources(); + + /* Setup the linkage between OF nodes and PHBs */ + pci_devs_phb_init(); + + /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We + * assume there is no P2P bridge on the AGP bus, which should be a + * safe assumptions hopefully. + */ + if (u3_agp) { + struct device_node *np = u3_agp->arch_data; + PCI_DN(np)->busno = 0xf0; + for (np = np->child; np; np = np->sibling) + PCI_DN(np)->busno = 0xf0; + } + + /* Tell pci.c to use the common resource allocation mecanism */ + pci_probe_only = 0; + + /* Allow all IO */ + io_page_mask = -1; +} + +int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) +{ + struct device_node *np; + int irq = channel ? 15 : 14; + + if (pdev->vendor != PCI_VENDOR_ID_AMD || + pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) + return irq; + + np = pci_device_to_OF_node(pdev); + if (np == NULL) + return irq; + if (np->n_intrs < 2) + return irq; + return np->intrs[channel & 0x1].line; +} + +/* XXX: To remove once all firmwares are ok */ +static void fixup_maple_ide(struct pci_dev* dev) +{ +#if 0 /* Enable this to enable IDE port 0 */ + { + u8 v; + + pci_read_config_byte(dev, 0x40, &v); + v |= 2; + pci_write_config_byte(dev, 0x40, v); + } +#endif +#if 0 /* fix bus master base */ + pci_write_config_dword(dev, 0x20, 0xcc01); + printk("old ide resource: %lx -> %lx \n", + dev->resource[4].start, dev->resource[4].end); + dev->resource[4].start = 0xcc00; + dev->resource[4].end = 0xcc10; +#endif +#if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ + { + struct pci_dev *apicdev; + u32 v; + + apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0)); + if (apicdev == NULL) + printk("IDE Fixup IRQ: Can't find IO-APIC !\n"); + else { + pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14); + pci_read_config_dword(apicdev, 0xf4, &v); + v &= ~0x00000022; + pci_write_config_dword(apicdev, 0xf4, v); + pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15); + pci_read_config_dword(apicdev, 0xf4, &v); + v &= ~0x00000022; + pci_write_config_dword(apicdev, 0xf4, v); + pci_dev_put(apicdev); + } + } +#endif +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, + fixup_maple_ide); diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c new file mode 100644 index 00000000000..7ece8983a10 --- /dev/null +++ b/arch/powerpc/platforms/maple/setup.c @@ -0,0 +1,295 @@ +/* + * Maple (970 eval board) setup code + * + * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#define DEBUG + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/tty.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/major.h> +#include <linux/initrd.h> +#include <linux/vt_kern.h> +#include <linux/console.h> +#include <linux/ide.h> +#include <linux/pci.h> +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/serial.h> +#include <linux/smp.h> + +#include <asm/processor.h> +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/bitops.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/machdep.h> +#include <asm/dma.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/of_device.h> +#include <asm/lmb.h> +#include <asm/mpic.h> +#include <asm/udbg.h> + +#include "maple.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +extern void generic_find_legacy_serial_ports(u64 *physport, + unsigned int *default_speed); + +static void maple_restart(char *cmd) +{ + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "restart-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "restart-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; +} + +static void maple_power_off(void) +{ + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "power-off-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "power-off-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; +} + +static void maple_halt(void) +{ + maple_power_off(); +} + +#ifdef CONFIG_SMP +struct smp_ops_t maple_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .kick_cpu = smp_generic_kick_cpu, + .setup_cpu = smp_mpic_setup_cpu, + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +}; +#endif /* CONFIG_SMP */ + +void __init maple_setup_arch(void) +{ + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + /* Setup SMP callback */ +#ifdef CONFIG_SMP + smp_ops = &maple_smp_ops; +#endif + /* Lookup PCI hosts */ + maple_pci_init(); + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + printk(KERN_INFO "Using native/NAP idle loop\n"); +} + +/* + * Early initialization. + */ +static void __init maple_init_early(void) +{ + unsigned int default_speed; + u64 physport; + + DBG(" -> maple_init_early\n"); + + /* Initialize hash table, from now on, we can take hash faults + * and call ioremap + */ + hpte_init_native(); + + /* Find the serial port */ + generic_find_legacy_serial_ports(&physport, &default_speed); + + DBG("phys port addr: %lx\n", (long)physport); + + if (physport) { + void *comport; + /* Map the uart for udbg. */ + comport = (void *)ioremap(physport, 16); + udbg_init_uart(comport, default_speed); + + DBG("Hello World !\n"); + } + + /* Setup interrupt mapping options */ + ppc64_interrupt_controller = IC_OPEN_PIC; + + iommu_init_early_u3(); + + DBG(" <- maple_init_early\n"); +} + + +static __init void maple_init_IRQ(void) +{ + struct device_node *root; + unsigned int *opprop; + unsigned long opic_addr; + struct mpic *mpic; + unsigned char senses[128]; + int n; + + DBG(" -> maple_init_IRQ\n"); + + /* XXX: Non standard, replace that with a proper openpic/mpic node + * in the device-tree. Find the Open PIC if present */ + root = of_find_node_by_path("/"); + opprop = (unsigned int *) get_property(root, + "platform-open-pic", NULL); + if (opprop == 0) + panic("OpenPIC not found !\n"); + + n = prom_n_addr_cells(root); + for (opic_addr = 0; n > 0; --n) + opic_addr = (opic_addr << 32) + *opprop++; + of_node_put(root); + + /* Obtain sense values from device-tree */ + prom_get_irq_senses(senses, 0, 128); + + mpic = mpic_alloc(opic_addr, + MPIC_PRIMARY | MPIC_BIG_ENDIAN | + MPIC_BROKEN_U3 | MPIC_WANTS_RESET, + 0, 0, 128, 128, senses, 128, "U3-MPIC"); + BUG_ON(mpic == NULL); + mpic_init(mpic); + + DBG(" <- maple_init_IRQ\n"); +} + +static void __init maple_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init maple_probe(int platform) +{ + if (platform != PLATFORM_MAPLE) + return 0; + /* + * On U3, the DART (iommu) must be allocated now since it + * has an impact on htab_initialize (due to the large page it + * occupies having to be broken up so the DART itself is not + * part of the cacheable linar mapping + */ + alloc_u3_dart_table(); + + return 1; +} + +struct machdep_calls __initdata maple_md = { + .probe = maple_probe, + .setup_arch = maple_setup_arch, + .init_early = maple_init_early, + .init_IRQ = maple_init_IRQ, + .get_irq = mpic_get_irq, + .pcibios_fixup = maple_pcibios_fixup, + .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq, + .restart = maple_restart, + .power_off = maple_power_off, + .halt = maple_halt, + .get_boot_time = maple_get_boot_time, + .set_rtc_time = maple_set_rtc_time, + .get_rtc_time = maple_get_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = maple_progress, + .idle_loop = native_idle, +}; diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c new file mode 100644 index 00000000000..40fc07a8e60 --- /dev/null +++ b/arch/powerpc/platforms/maple/time.c @@ -0,0 +1,180 @@ +/* + * arch/ppc64/kernel/maple_time.c + * + * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> +#include <linux/bcd.h> + +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/machdep.h> +#include <asm/time.h> + +#include "maple.h" + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +extern void GregorianDay(struct rtc_time * tm); + +static int maple_rtc_addr; + +static int maple_clock_read(int addr) +{ + outb_p(addr, maple_rtc_addr); + return inb_p(maple_rtc_addr+1); +} + +static void maple_clock_write(unsigned long val, int addr) +{ + outb_p(addr, maple_rtc_addr); + outb_p(val, maple_rtc_addr+1); +} + +void maple_get_rtc_time(struct rtc_time *tm) +{ + int uip, i; + + /* The Linux interpretation of the CMOS clock register contents: + * When the Update-In-Progress (UIP) flag goes from 1 to 0, the + * RTC registers show the second which has precisely just started. + * Let's hope other operating systems interpret the RTC the same way. + */ + + /* Since the UIP flag is set for about 2.2 ms and the clock + * is typically written with a precision of 1 jiffy, trying + * to obtain a precision better than a few milliseconds is + * an illusion. Only consistency is interesting, this also + * allows to use the routine for /dev/rtc without a potential + * 1 second kernel busy loop triggered by any reader of /dev/rtc. + */ + + for (i = 0; i<1000000; i++) { + uip = maple_clock_read(RTC_FREQ_SELECT); + tm->tm_sec = maple_clock_read(RTC_SECONDS); + tm->tm_min = maple_clock_read(RTC_MINUTES); + tm->tm_hour = maple_clock_read(RTC_HOURS); + tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH); + tm->tm_mon = maple_clock_read(RTC_MONTH); + tm->tm_year = maple_clock_read(RTC_YEAR); + uip |= maple_clock_read(RTC_FREQ_SELECT); + if ((uip & RTC_UIP)==0) + break; + } + + if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY) + || RTC_ALWAYS_BCD) { + BCD_TO_BIN(tm->tm_sec); + BCD_TO_BIN(tm->tm_min); + BCD_TO_BIN(tm->tm_hour); + BCD_TO_BIN(tm->tm_mday); + BCD_TO_BIN(tm->tm_mon); + BCD_TO_BIN(tm->tm_year); + } + if ((tm->tm_year + 1900) < 1970) + tm->tm_year += 100; + + GregorianDay(tm); +} + +int maple_set_rtc_time(struct rtc_time *tm) +{ + unsigned char save_control, save_freq_select; + int sec, min, hour, mon, mday, year; + + spin_lock(&rtc_lock); + + save_control = maple_clock_read(RTC_CONTROL); /* tell the clock it's being set */ + + maple_clock_write((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = maple_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ + + maple_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + sec = tm->tm_sec; + min = tm->tm_min; + hour = tm->tm_hour; + mon = tm->tm_mon; + mday = tm->tm_mday; + year = tm->tm_year; + + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BIN_TO_BCD(sec); + BIN_TO_BCD(min); + BIN_TO_BCD(hour); + BIN_TO_BCD(mon); + BIN_TO_BCD(mday); + BIN_TO_BCD(year); + } + maple_clock_write(sec, RTC_SECONDS); + maple_clock_write(min, RTC_MINUTES); + maple_clock_write(hour, RTC_HOURS); + maple_clock_write(mon, RTC_MONTH); + maple_clock_write(mday, RTC_DAY_OF_MONTH); + maple_clock_write(year, RTC_YEAR); + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + maple_clock_write(save_control, RTC_CONTROL); + maple_clock_write(save_freq_select, RTC_FREQ_SELECT); + + spin_unlock(&rtc_lock); + + return 0; +} + +unsigned long __init maple_get_boot_time(void) +{ + struct rtc_time tm; + struct device_node *rtcs; + + rtcs = find_compatible_devices("rtc", "pnpPNP,b00"); + if (rtcs && rtcs->addrs) { + maple_rtc_addr = rtcs->addrs[0].address; + printk(KERN_INFO "Maple: Found RTC at 0x%x\n", maple_rtc_addr); + } else { + maple_rtc_addr = RTC_PORT(0); /* legacy address */ + printk(KERN_INFO "Maple: No device node for RTC, assuming " + "legacy address (0x%x)\n", maple_rtc_addr); + } + + maple_get_rtc_time(&tm); + return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); +} + diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile new file mode 100644 index 00000000000..4369676f1d5 --- /dev/null +++ b/arch/powerpc/platforms/powermac/Makefile @@ -0,0 +1,8 @@ +obj-y += pic.o setup.o time.o feature.o pci.o \ + sleep.o low_i2c.o cache.o +obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o +obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq.o +obj-$(CONFIG_NVRAM) += nvram.o +# ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff +obj-$(CONFIG_PPC64) += nvram.o +obj-$(CONFIG_SMP) += smp.o diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c new file mode 100644 index 00000000000..8be2f7d071f --- /dev/null +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -0,0 +1,202 @@ +/* + * Miscellaneous procedures for dealing with the PowerMac hardware. + * Contains support for the backlight. + * + * Copyright (C) 2000 Benjamin Herrenschmidt + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/stddef.h> +#include <linux/reboot.h> +#include <linux/nvram.h> +#include <linux/console.h> +#include <asm/sections.h> +#include <asm/ptrace.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/nvram.h> +#include <asm/backlight.h> + +#include <linux/adb.h> +#include <linux/pmu.h> + +static struct backlight_controller *backlighter; +static void* backlighter_data; +static int backlight_autosave; +static int backlight_level = BACKLIGHT_MAX; +static int backlight_enabled = 1; +static int backlight_req_level = -1; +static int backlight_req_enable = -1; + +static void backlight_callback(void *); +static DECLARE_WORK(backlight_work, backlight_callback, NULL); + +void register_backlight_controller(struct backlight_controller *ctrler, + void *data, char *type) +{ + struct device_node* bk_node; + char *prop; + int valid = 0; + + /* There's already a matching controller, bail out */ + if (backlighter != NULL) + return; + + bk_node = find_devices("backlight"); + +#ifdef CONFIG_ADB_PMU + /* Special case for the old PowerBook since I can't test on it */ + backlight_autosave = machine_is_compatible("AAPL,3400/2400") + || machine_is_compatible("AAPL,3500"); + if ((backlight_autosave + || machine_is_compatible("AAPL,PowerBook1998") + || machine_is_compatible("PowerBook1,1")) + && !strcmp(type, "pmu")) + valid = 1; +#endif + if (bk_node) { + prop = get_property(bk_node, "backlight-control", NULL); + if (prop && !strncmp(prop, type, strlen(type))) + valid = 1; + } + if (!valid) + return; + backlighter = ctrler; + backlighter_data = data; + + if (bk_node && !backlight_autosave) + prop = get_property(bk_node, "bklt", NULL); + else + prop = NULL; + if (prop) { + backlight_level = ((*prop)+1) >> 1; + if (backlight_level > BACKLIGHT_MAX) + backlight_level = BACKLIGHT_MAX; + } + +#ifdef CONFIG_ADB_PMU + if (backlight_autosave) { + struct adb_request req; + pmu_request(&req, NULL, 2, 0xd9, 0); + while (!req.complete) + pmu_poll(); + backlight_level = req.reply[0] >> 4; + } +#endif + acquire_console_sem(); + if (!backlighter->set_enable(1, backlight_level, data)) + backlight_enabled = 1; + release_console_sem(); + + printk(KERN_INFO "Registered \"%s\" backlight controller," + "level: %d/15\n", type, backlight_level); +} +EXPORT_SYMBOL(register_backlight_controller); + +void unregister_backlight_controller(struct backlight_controller + *ctrler, void *data) +{ + /* We keep the current backlight level (for now) */ + if (ctrler == backlighter && data == backlighter_data) + backlighter = NULL; +} +EXPORT_SYMBOL(unregister_backlight_controller); + +static int __set_backlight_enable(int enable) +{ + int rc; + + if (!backlighter) + return -ENODEV; + acquire_console_sem(); + rc = backlighter->set_enable(enable, backlight_level, + backlighter_data); + if (!rc) + backlight_enabled = enable; + release_console_sem(); + return rc; +} +int set_backlight_enable(int enable) +{ + if (!backlighter) + return -ENODEV; + backlight_req_enable = enable; + schedule_work(&backlight_work); + return 0; +} + +EXPORT_SYMBOL(set_backlight_enable); + +int get_backlight_enable(void) +{ + if (!backlighter) + return -ENODEV; + return backlight_enabled; +} +EXPORT_SYMBOL(get_backlight_enable); + +static int __set_backlight_level(int level) +{ + int rc = 0; + + if (!backlighter) + return -ENODEV; + if (level < BACKLIGHT_MIN) + level = BACKLIGHT_OFF; + if (level > BACKLIGHT_MAX) + level = BACKLIGHT_MAX; + acquire_console_sem(); + if (backlight_enabled) + rc = backlighter->set_level(level, backlighter_data); + if (!rc) + backlight_level = level; + release_console_sem(); + if (!rc && !backlight_autosave) { + level <<=1; + if (level & 0x10) + level |= 0x01; + // -- todo: save to property "bklt" + } + return rc; +} +int set_backlight_level(int level) +{ + if (!backlighter) + return -ENODEV; + backlight_req_level = level; + schedule_work(&backlight_work); + return 0; +} + +EXPORT_SYMBOL(set_backlight_level); + +int get_backlight_level(void) +{ + if (!backlighter) + return -ENODEV; + return backlight_level; +} +EXPORT_SYMBOL(get_backlight_level); + +static void backlight_callback(void *dummy) +{ + int level, enable; + + do { + level = backlight_req_level; + enable = backlight_req_enable; + mb(); + + if (level >= 0) + __set_backlight_level(level); + if (enable >= 0) + __set_backlight_enable(enable); + } while(cmpxchg(&backlight_req_level, level, -1) != level || + cmpxchg(&backlight_req_enable, enable, -1) != enable); +} diff --git a/arch/powerpc/platforms/powermac/cache.S b/arch/powerpc/platforms/powermac/cache.S new file mode 100644 index 00000000000..fb977de6b70 --- /dev/null +++ b/arch/powerpc/platforms/powermac/cache.S @@ -0,0 +1,359 @@ +/* + * This file contains low-level cache management functions + * used for sleep and CPU speed changes on Apple machines. + * (In fact the only thing that is Apple-specific is that we assume + * that we can read from ROM at physical address 0xfff00000.) + * + * Copyright (C) 2004 Paul Mackerras (paulus@samba.org) and + * Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/ppc_asm.h> +#include <asm/cputable.h> + +/* + * Flush and disable all data caches (dL1, L2, L3). This is used + * when going to sleep, when doing a PMU based cpufreq transition, + * or when "offlining" a CPU on SMP machines. This code is over + * paranoid, but I've had enough issues with various CPU revs and + * bugs that I decided it was worth beeing over cautious + */ + +_GLOBAL(flush_disable_caches) +#ifndef CONFIG_6xx + blr +#else +BEGIN_FTR_SECTION + b flush_disable_745x +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) +BEGIN_FTR_SECTION + b flush_disable_75x +END_FTR_SECTION_IFSET(CPU_FTR_L2CR) + b __flush_disable_L1 + +/* This is the code for G3 and 74[01]0 */ +flush_disable_75x: + mflr r10 + + /* Turn off EE and DR in MSR */ + mfmsr r11 + rlwinm r0,r11,0,~MSR_EE + rlwinm r0,r0,0,~MSR_DR + sync + mtmsr r0 + isync + + /* Stop DST streams */ +BEGIN_FTR_SECTION + DSSALL + sync +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) + + /* Stop DPM */ + mfspr r8,SPRN_HID0 /* Save SPRN_HID0 in r8 */ + rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ + sync + mtspr SPRN_HID0,r4 /* Disable DPM */ + sync + + /* Disp-flush L1. We have a weird problem here that I never + * totally figured out. On 750FX, using the ROM for the flush + * results in a non-working flush. We use that workaround for + * now until I finally understand what's going on. --BenH + */ + + /* ROM base by default */ + lis r4,0xfff0 + mfpvr r3 + srwi r3,r3,16 + cmplwi cr0,r3,0x7000 + bne+ 1f + /* RAM base on 750FX */ + li r4,0 +1: li r4,0x4000 + mtctr r4 +1: lwz r0,0(r4) + addi r4,r4,32 + bdnz 1b + sync + isync + + /* Disable / invalidate / enable L1 data */ + mfspr r3,SPRN_HID0 + rlwinm r3,r3,0,~(HID0_DCE | HID0_ICE) + mtspr SPRN_HID0,r3 + sync + isync + ori r3,r3,(HID0_DCE|HID0_DCI|HID0_ICE|HID0_ICFI) + sync + isync + mtspr SPRN_HID0,r3 + xori r3,r3,(HID0_DCI|HID0_ICFI) + mtspr SPRN_HID0,r3 + sync + + /* Get the current enable bit of the L2CR into r4 */ + mfspr r5,SPRN_L2CR + /* Set to data-only (pre-745x bit) */ + oris r3,r5,L2CR_L2DO@h + b 2f + /* When disabling L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r3 +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: /* disp-flush L2. The interesting thing here is that the L2 can be + * up to 2Mb ... so using the ROM, we'll end up wrapping back to memory + * but that is probbaly fine. We disp-flush over 4Mb to be safe + */ + lis r4,2 + mtctr r4 + lis r4,0xfff0 +1: lwz r0,0(r4) + addi r4,r4,32 + bdnz 1b + sync + isync + lis r4,2 + mtctr r4 + lis r4,0xfff0 +1: dcbf 0,r4 + addi r4,r4,32 + bdnz 1b + sync + isync + + /* now disable L2 */ + rlwinm r5,r5,0,~L2CR_L2E + b 2f + /* When disabling L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r5 +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: sync + isync + /* Invalidate L2. This is pre-745x, we clear the L2I bit ourselves */ + oris r4,r5,L2CR_L2I@h + mtspr SPRN_L2CR,r4 + sync + isync + + /* Wait for the invalidation to complete */ +1: mfspr r3,SPRN_L2CR + rlwinm. r0,r3,0,31,31 + bne 1b + + /* Clear L2I */ + xoris r4,r4,L2CR_L2I@h + sync + mtspr SPRN_L2CR,r4 + sync + + /* now disable the L1 data cache */ + mfspr r0,SPRN_HID0 + rlwinm r0,r0,0,~(HID0_DCE|HID0_ICE) + mtspr SPRN_HID0,r0 + sync + isync + + /* Restore HID0[DPM] to whatever it was before */ + sync + mfspr r0,SPRN_HID0 + rlwimi r0,r8,0,11,11 /* Turn back HID0[DPM] */ + mtspr SPRN_HID0,r0 + sync + + /* restore DR and EE */ + sync + mtmsr r11 + isync + + mtlr r10 + blr + +/* This code is for 745x processors */ +flush_disable_745x: + /* Turn off EE and DR in MSR */ + mfmsr r11 + rlwinm r0,r11,0,~MSR_EE + rlwinm r0,r0,0,~MSR_DR + sync + mtmsr r0 + isync + + /* Stop prefetch streams */ + DSSALL + sync + + /* Disable L2 prefetching */ + mfspr r0,SPRN_MSSCR0 + rlwinm r0,r0,0,0,29 + mtspr SPRN_MSSCR0,r0 + sync + isync + lis r4,0 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + dcbf 0,r4 + + /* Due to a bug with the HW flush on some CPU revs, we occasionally + * experience data corruption. I'm adding a displacement flush along + * with a dcbf loop over a few Mb to "help". The problem isn't totally + * fixed by this in theory, but at least, in practice, I couldn't reproduce + * it even with a big hammer... + */ + + lis r4,0x0002 + mtctr r4 + li r4,0 +1: + lwz r0,0(r4) + addi r4,r4,32 /* Go to start of next cache line */ + bdnz 1b + isync + + /* Now, flush the first 4MB of memory */ + lis r4,0x0002 + mtctr r4 + li r4,0 + sync +1: + dcbf 0,r4 + addi r4,r4,32 /* Go to start of next cache line */ + bdnz 1b + + /* Flush and disable the L1 data cache */ + mfspr r6,SPRN_LDSTCR + lis r3,0xfff0 /* read from ROM for displacement flush */ + li r4,0xfe /* start with only way 0 unlocked */ + li r5,128 /* 128 lines in each way */ +1: mtctr r5 + rlwimi r6,r4,0,24,31 + mtspr SPRN_LDSTCR,r6 + sync + isync +2: lwz r0,0(r3) /* touch each cache line */ + addi r3,r3,32 + bdnz 2b + rlwinm r4,r4,1,24,30 /* move on to the next way */ + ori r4,r4,1 + cmpwi r4,0xff /* all done? */ + bne 1b + /* now unlock the L1 data cache */ + li r4,0 + rlwimi r6,r4,0,24,31 + sync + mtspr SPRN_LDSTCR,r6 + sync + isync + + /* Flush the L2 cache using the hardware assist */ + mfspr r3,SPRN_L2CR + cmpwi r3,0 /* check if it is enabled first */ + bge 4f + oris r0,r3,(L2CR_L2IO_745x|L2CR_L2DO_745x)@h + b 2f + /* When disabling/locking L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r0 /* lock the L2 cache */ +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: sync + isync + ori r0,r3,L2CR_L2HWF_745x + sync + mtspr SPRN_L2CR,r0 /* set the hardware flush bit */ +3: mfspr r0,SPRN_L2CR /* wait for it to go to 0 */ + andi. r0,r0,L2CR_L2HWF_745x + bne 3b + sync + rlwinm r3,r3,0,~L2CR_L2E + b 2f + /* When disabling L2, code must be in L1 */ + .balign 32 +1: mtspr SPRN_L2CR,r3 /* disable the L2 cache */ +3: sync + isync + b 1f +2: b 3f +3: sync + isync + b 1b +1: sync + isync + oris r4,r3,L2CR_L2I@h + mtspr SPRN_L2CR,r4 + sync + isync +1: mfspr r4,SPRN_L2CR + andis. r0,r4,L2CR_L2I@h + bne 1b + sync + +BEGIN_FTR_SECTION + /* Flush the L3 cache using the hardware assist */ +4: mfspr r3,SPRN_L3CR + cmpwi r3,0 /* check if it is enabled */ + bge 6f + oris r0,r3,L3CR_L3IO@h + ori r0,r0,L3CR_L3DO + sync + mtspr SPRN_L3CR,r0 /* lock the L3 cache */ + sync + isync + ori r0,r0,L3CR_L3HWF + sync + mtspr SPRN_L3CR,r0 /* set the hardware flush bit */ +5: mfspr r0,SPRN_L3CR /* wait for it to go to zero */ + andi. r0,r0,L3CR_L3HWF + bne 5b + rlwinm r3,r3,0,~L3CR_L3E + sync + mtspr SPRN_L3CR,r3 /* disable the L3 cache */ + sync + ori r4,r3,L3CR_L3I + mtspr SPRN_L3CR,r4 +1: mfspr r4,SPRN_L3CR + andi. r0,r4,L3CR_L3I + bne 1b + sync +END_FTR_SECTION_IFSET(CPU_FTR_L3CR) + +6: mfspr r0,SPRN_HID0 /* now disable the L1 data cache */ + rlwinm r0,r0,0,~HID0_DCE + mtspr SPRN_HID0,r0 + sync + isync + mtmsr r11 /* restore DR and EE */ + isync + blr +#endif /* CONFIG_6xx */ diff --git a/arch/powerpc/platforms/powermac/cpufreq.c b/arch/powerpc/platforms/powermac/cpufreq.c new file mode 100644 index 00000000000..c47f8b69725 --- /dev/null +++ b/arch/powerpc/platforms/powermac/cpufreq.c @@ -0,0 +1,726 @@ +/* + * arch/ppc/platforms/pmac_cpufreq.c + * + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * TODO: Need a big cleanup here. Basically, we need to have different + * cpufreq_driver structures for the different type of HW instead of the + * current mess. We also need to better deal with the detection of the + * type of machine. + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/slab.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/i2c.h> +#include <linux/hardirq.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/pmac_feature.h> +#include <asm/mmu_context.h> +#include <asm/sections.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/system.h> +#include <asm/mpic.h> +#include <asm/keylargo.h> + +/* WARNING !!! This will cause calibrate_delay() to be called, + * but this is an __init function ! So you MUST go edit + * init/main.c to make it non-init before enabling DEBUG_FREQ + */ +#undef DEBUG_FREQ + +/* + * There is a problem with the core cpufreq code on SMP kernels, + * it won't recalculate the Bogomips properly + */ +#ifdef CONFIG_SMP +#warning "WARNING, CPUFREQ not recommended on SMP kernels" +#endif + +extern void low_choose_7447a_dfs(int dfs); +extern void low_choose_750fx_pll(int pll); +extern void low_sleep_handler(void); + +/* + * Currently, PowerMac cpufreq supports only high & low frequencies + * that are set by the firmware + */ +static unsigned int low_freq; +static unsigned int hi_freq; +static unsigned int cur_freq; +static unsigned int sleep_freq; + +/* + * Different models uses different mecanisms to switch the frequency + */ +static int (*set_speed_proc)(int low_speed); +static unsigned int (*get_speed_proc)(void); + +/* + * Some definitions used by the various speedprocs + */ +static u32 voltage_gpio; +static u32 frequency_gpio; +static u32 slew_done_gpio; +static int no_schedule; +static int has_cpu_l2lve; +static int is_pmu_based; + +/* There are only two frequency states for each processor. Values + * are in kHz for the time being. + */ +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 + +static struct cpufreq_frequency_table pmac_cpu_freqs[] = { + {CPUFREQ_HIGH, 0}, + {CPUFREQ_LOW, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +static inline void local_delay(unsigned long ms) +{ + if (no_schedule) + mdelay(ms); + else + msleep(ms); +} + +#ifdef DEBUG_FREQ +static inline void debug_calc_bogomips(void) +{ + /* This will cause a recalc of bogomips and display the + * result. We backup/restore the value to avoid affecting the + * core cpufreq framework's own calculation. + */ + extern void calibrate_delay(void); + + unsigned long save_lpj = loops_per_jiffy; + calibrate_delay(); + loops_per_jiffy = save_lpj; +} +#endif /* DEBUG_FREQ */ + +/* Switch CPU speed under 750FX CPU control + */ +static int cpu_750fx_cpu_speed(int low_speed) +{ + u32 hid2; + + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(10); + + /* tweak L2 for high voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 &= ~0x2000; + mtspr(SPRN_HID2, hid2); + } + } +#ifdef CONFIG_6xx + low_choose_750fx_pll(low_speed); +#endif + if (low_speed == 1) { + /* tweak L2 for low voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 |= 0x2000; + mtspr(SPRN_HID2, hid2); + } + + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(10); + } + + return 0; +} + +static unsigned int cpu_750fx_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_PS) + return low_freq; + else + return hi_freq; +} + +/* Switch CPU speed using DFS */ +static int dfs_set_cpu_speed(int low_speed) +{ + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(1); + } + + /* set frequency */ +#ifdef CONFIG_6xx + low_choose_7447a_dfs(low_speed); +#endif + udelay(100); + + if (low_speed == 1) { + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(1); + } + + return 0; +} + +static unsigned int dfs_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_DFS) + return low_freq; + else + return hi_freq; +} + + +/* Switch CPU speed using slewing GPIOs + */ +static int gpios_set_cpu_speed(int low_speed) +{ + int gpio, timeout = 0; + + /* If ramping up, set voltage first */ + if (low_speed == 0) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + + /* Set frequency */ + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + if (low_speed == ((gpio & 0x01) == 0)) + goto skip; + + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, + low_speed ? 0x04 : 0x05); + udelay(200); + do { + if (++timeout > 100) + break; + local_delay(1); + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); + } while((gpio & 0x02) == 0); + skip: + /* If ramping down, set voltage last */ + if (low_speed == 1) { + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + /* Delay is way too big but it's ok, we schedule */ + local_delay(10); + } + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + return 0; +} + +/* Switch CPU speed under PMU control + */ +static int pmu_set_cpu_speed(int low_speed) +{ + struct adb_request req; + unsigned long save_l2cr; + unsigned long save_l3cr; + unsigned int pic_prio; + unsigned long flags; + + preempt_disable(); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); +#endif + pmu_suspend(); + + /* Disable all interrupt sources on openpic */ + pic_prio = mpic_cpu_get_priority(); + mpic_cpu_set_priority(0xf); + + /* Make sure the decrementer won't interrupt us */ + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + /* Make sure any pending DEC interrupt occuring while we did + * the above didn't re-enable the DEC */ + mb(); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + + /* We can now disable MSR_EE */ + local_irq_save(flags); + + /* Giveup the FPU & vec */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + /* Save & disable L2 and L3 caches */ + save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ + save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ + + /* Send the new speed command. My assumption is that this command + * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep + */ + pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); + while (!req.complete) + pmu_poll(); + + /* Prepare the northbridge for the speed transition */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); + + /* Call low level code to backup CPU state and recover from + * hardware reset + */ + low_sleep_handler(); + + /* Restore the northbridge */ + pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); + + /* Restore L2 cache */ + if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) + _set_L2CR(save_l2cr); + /* Restore L3 cache */ + if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) + _set_L3CR(save_l3cr); + + /* Restore userland MMU context */ + set_context(current->active_mm->context, current->active_mm->pgd); + +#ifdef DEBUG_FREQ + printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); +#endif + + /* Restore low level PMU operations */ + pmu_unlock(); + + /* Restore decrementer */ + wakeup_decrementer(); + + /* Restore interrupts */ + mpic_cpu_set_priority(pic_prio); + + /* Let interrupts flow again ... */ + local_irq_restore(flags); + +#ifdef DEBUG_FREQ + debug_calc_bogomips(); +#endif + + pmu_resume(); + + preempt_enable(); + + return 0; +} + +static int do_set_cpu_speed(int speed_mode, int notify) +{ + struct cpufreq_freqs freqs; + unsigned long l3cr; + static unsigned long prev_l3cr; + + freqs.old = cur_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + freqs.cpu = smp_processor_id(); + + if (freqs.old == freqs.new) + return 0; + + if (notify) + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + if (speed_mode == CPUFREQ_LOW && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if (l3cr & L3CR_L3E) { + prev_l3cr = l3cr; + _set_L3CR(0); + } + } + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) + _set_L3CR(prev_l3cr); + } + if (notify) + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; + + return 0; +} + +static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) +{ + return cur_freq; +} + +static int pmac_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); +} + +static int pmac_cpufreq_target( struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int newstate = 0; + + if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, + target_freq, relation, &newstate)) + return -EINVAL; + + return do_set_cpu_speed(newstate, 1); +} + +unsigned int pmac_get_one_cpufreq(int i) +{ + /* Supports only one CPU for now */ + return (i == 0) ? cur_freq : 0; +} + +static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + if (policy->cpu != 0) + return -ENODEV; + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cur = cur_freq; + + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); +} + +static u32 read_gpio(struct device_node *np) +{ + u32 *reg = (u32 *)get_property(np, "reg", NULL); + u32 offset; + + if (reg == NULL) + return 0; + /* That works for all keylargos but shall be fixed properly + * some day... The problem is that it seems we can't rely + * on the "reg" property of the GPIO nodes, they are either + * relative to the base of KeyLargo or to the base of the + * GPIO space, and the device-tree doesn't help. + */ + offset = *reg; + if (offset < KEYLARGO_GPIO_LEVELS0) + offset += KEYLARGO_GPIO_LEVELS0; + return offset; +} + +static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg) +{ + /* Ok, this could be made a bit smarter, but let's be robust for now. We + * always force a speed change to high speed before sleep, to make sure + * we have appropriate voltage and/or bus speed for the wakeup process, + * and to make sure our loops_per_jiffies are "good enough", that is will + * not cause too short delays if we sleep in low speed and wake in high + * speed.. + */ + no_schedule = 1; + sleep_freq = cur_freq; + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(CPUFREQ_HIGH, 0); + return 0; +} + +static int pmac_cpufreq_resume(struct cpufreq_policy *policy) +{ + /* If we resume, first check if we have a get() function */ + if (get_speed_proc) + cur_freq = get_speed_proc(); + else + cur_freq = 0; + + /* We don't, hrm... we don't really know our speed here, best + * is that we force a switch to whatever it was, which is + * probably high speed due to our suspend() routine + */ + do_set_cpu_speed(sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); + + no_schedule = 0; + return 0; +} + +static struct cpufreq_driver pmac_cpufreq_driver = { + .verify = pmac_cpufreq_verify, + .target = pmac_cpufreq_target, + .get = pmac_cpufreq_get_speed, + .init = pmac_cpufreq_cpu_init, + .suspend = pmac_cpufreq_suspend, + .resume = pmac_cpufreq_resume, + .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, + .name = "powermac", + .owner = THIS_MODULE, +}; + + +static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np = of_find_node_by_name(NULL, + "voltage-gpio"); + struct device_node *freq_gpio_np = of_find_node_by_name(NULL, + "frequency-gpio"); + struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, + "slewing-done"); + u32 *value; + + /* + * Check to see if it's GPIO driven or PMU only + * + * The way we extract the GPIO address is slightly hackish, but it + * works well enough for now. We need to abstract the whole GPIO + * stuff sooner or later anyway + */ + + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (freq_gpio_np) + frequency_gpio = read_gpio(freq_gpio_np); + if (slew_done_gpio_np) + slew_done_gpio = read_gpio(slew_done_gpio_np); + + /* If we use the frequency GPIOs, calculate the min/max speeds based + * on the bus frequencies + */ + if (frequency_gpio && slew_done_gpio) { + int lenp, rc; + u32 *freqs, *ratio; + + freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp); + lenp /= sizeof(u32); + if (freqs == NULL || lenp != 2) { + printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); + return 1; + } + ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL); + if (ratio == NULL) { + printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); + return 1; + } + + /* Get the min/max bus frequencies */ + low_freq = min(freqs[0], freqs[1]); + hi_freq = max(freqs[0], freqs[1]); + + /* Grrrr.. It _seems_ that the device-tree is lying on the low bus + * frequency, it claims it to be around 84Mhz on some models while + * it appears to be approx. 101Mhz on all. Let's hack around here... + * fortunately, we don't need to be too precise + */ + if (low_freq < 98000000) + low_freq = 101000000; + + /* Convert those to CPU core clocks */ + low_freq = (low_freq * (*ratio)) / 2000; + hi_freq = (hi_freq * (*ratio)) / 2000; + + /* Now we get the frequencies, we read the GPIO to see what is out current + * speed + */ + rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + cur_freq = (rc & 0x01) ? hi_freq : low_freq; + + set_speed_proc = gpios_set_cpu_speed; + return 1; + } + + /* If we use the PMU, look for the min & max frequencies in the + * device-tree + */ + value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree + * here */ + if (low_freq < 100000) + low_freq *= 10; + + value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL); + if (!value) + return 1; + hi_freq = (*value) / 1000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + + return 0; +} + +static int pmac_cpufreq_init_7447A(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + + if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (!voltage_gpio){ + printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); + return 1; + } + + /* OF only reports the high frequency */ + hi_freq = cur_freq; + low_freq = cur_freq/2; + + /* Read actual frequency from CPU */ + cur_freq = dfs_get_cpu_speed(); + set_speed_proc = dfs_set_cpu_speed; + get_speed_proc = dfs_get_cpu_speed; + + return 0; +} + +static int pmac_cpufreq_init_750FX(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + u32 pvr, *value; + + if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + hi_freq = cur_freq; + value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + + pvr = mfspr(SPRN_PVR); + has_cpu_l2lve = !((pvr & 0xf00) == 0x100); + + set_speed_proc = cpu_750fx_cpu_speed; + get_speed_proc = cpu_750fx_get_cpu_speed; + cur_freq = cpu_750fx_get_cpu_speed(); + + return 0; +} + +/* Currently, we support the following machines: + * + * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) + * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) + * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) + * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) + * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) + * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) + * - Recent MacRISC3 laptops + * - All new machines with 7447A CPUs + */ +static int __init pmac_cpufreq_setup(void) +{ + struct device_node *cpunode; + u32 *value; + + if (strstr(cmd_line, "nocpufreq")) + return 0; + + /* Assume only one CPU */ + cpunode = find_type_devices("cpu"); + if (!cpunode) + goto out; + + /* Get current cpu clock freq */ + value = (u32 *)get_property(cpunode, "clock-frequency", NULL); + if (!value) + goto out; + cur_freq = (*value) / 1000; + + /* Check for 7447A based MacRISC3 */ + if (machine_is_compatible("MacRISC3") && + get_property(cpunode, "dynamic-power-step", NULL) && + PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { + pmac_cpufreq_init_7447A(cpunode); + /* Check for other MacRISC3 machines */ + } else if (machine_is_compatible("PowerBook3,4") || + machine_is_compatible("PowerBook3,5") || + machine_is_compatible("MacRISC3")) { + pmac_cpufreq_init_MacRISC3(cpunode); + /* Else check for iBook2 500/600 */ + } else if (machine_is_compatible("PowerBook4,1")) { + hi_freq = cur_freq; + low_freq = 400000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 550 */ + else if (machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { + hi_freq = cur_freq; + low_freq = 500000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for TiPb 400 & 500 */ + else if (machine_is_compatible("PowerBook3,2")) { + /* We only know about the 400 MHz and the 500Mhz model + * they both have 300 MHz as low frequency + */ + if (cur_freq < 350000 || cur_freq > 550000) + goto out; + hi_freq = cur_freq; + low_freq = 300000; + set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; + } + /* Else check for 750FX */ + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) + pmac_cpufreq_init_750FX(cpunode); +out: + if (set_speed_proc == NULL) + return -ENODEV; + + pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; + pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; + + printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); + printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", + low_freq/1000, hi_freq/1000, cur_freq/1000); + + return cpufreq_register_driver(&pmac_cpufreq_driver); +} + +module_init(pmac_cpufreq_setup); + diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c new file mode 100644 index 00000000000..10f1d942c66 --- /dev/null +++ b/arch/powerpc/platforms/powermac/feature.c @@ -0,0 +1,3063 @@ +/* + * arch/ppc/platforms/pmac_feature.c + * + * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) + * Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * TODO: + * + * - Replace mdelay with some schedule loop if possible + * - Shorten some obfuscated delays on some routines (like modem + * power) + * - Refcount some clocks (see darwin) + * - Split split split... + * + */ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <asm/sections.h> +#include <asm/errno.h> +#include <asm/ohare.h> +#include <asm/heathrow.h> +#include <asm/keylargo.h> +#include <asm/uninorth.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/dbdma.h> +#include <asm/pci-bridge.h> +#include <asm/pmac_low_i2c.h> + +#undef DEBUG_FEATURE + +#ifdef DEBUG_FEATURE +#define DBG(fmt...) printk(KERN_DEBUG fmt) +#else +#define DBG(fmt...) +#endif + +#ifdef CONFIG_6xx +extern int powersave_lowspeed; +#endif + +extern int powersave_nap; +extern struct device_node *k2_skiplist[2]; + + +/* + * We use a single global lock to protect accesses. Each driver has + * to take care of its own locking + */ +static DEFINE_SPINLOCK(feature_lock); + +#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags); +#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags); + + +/* + * Instance of some macio stuffs + */ +struct macio_chip macio_chips[MAX_MACIO_CHIPS]; + +struct macio_chip *macio_find(struct device_node *child, int type) +{ + while(child) { + int i; + + for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++) + if (child == macio_chips[i].of_node && + (!type || macio_chips[i].type == type)) + return &macio_chips[i]; + child = child->parent; + } + return NULL; +} +EXPORT_SYMBOL_GPL(macio_find); + +static const char *macio_names[] = +{ + "Unknown", + "Grand Central", + "OHare", + "OHareII", + "Heathrow", + "Gatwick", + "Paddington", + "Keylargo", + "Pangea", + "Intrepid", + "K2" +}; + + + +/* + * Uninorth reg. access. Note that Uni-N regs are big endian + */ + +#define UN_REG(r) (uninorth_base + ((r) >> 2)) +#define UN_IN(r) (in_be32(UN_REG(r))) +#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) +#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) +#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) + +static struct device_node *uninorth_node; +static u32 __iomem *uninorth_base; +static u32 uninorth_rev; +static int uninorth_u3; +static void __iomem *u3_ht; + +/* + * For each motherboard family, we have a table of functions pointers + * that handle the various features. + */ + +typedef long (*feature_call)(struct device_node *node, long param, long value); + +struct feature_table_entry { + unsigned int selector; + feature_call function; +}; + +struct pmac_mb_def +{ + const char* model_string; + const char* model_name; + int model_id; + struct feature_table_entry* features; + unsigned long board_flags; +}; +static struct pmac_mb_def pmac_mb; + +/* + * Here are the chip specific feature functions + */ + +static inline int simple_feature_tweak(struct device_node *node, int type, + int reg, u32 mask, int value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, type); + if (!macio) + return -ENODEV; + LOCK(flags); + if (value) + MACIO_BIS(reg, mask); + else + MACIO_BIC(reg, mask); + (void)MACIO_IN32(reg); + UNLOCK(flags); + + return 0; +} + +#ifndef CONFIG_POWER4 + +static long ohare_htw_scc_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long chan_mask; + unsigned long fcr; + unsigned long flags; + int htw, trans; + unsigned long rmask; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (!strcmp(node->name, "ch-a")) + chan_mask = MACIO_FLAG_SCCA_ON; + else if (!strcmp(node->name, "ch-b")) + chan_mask = MACIO_FLAG_SCCB_ON; + else + return -ENODEV; + + htw = (macio->type == macio_heathrow || macio->type == macio_paddington + || macio->type == macio_gatwick); + /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */ + trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && + pmac_mb.model_id != PMAC_TYPE_YIKES); + if (value) { +#ifdef CONFIG_ADB_PMU + if ((param & 0xfff) == PMAC_SCC_IRDA) + pmu_enable_irled(1); +#endif /* CONFIG_ADB_PMU */ + LOCK(flags); + fcr = MACIO_IN32(OHARE_FCR); + /* Check if scc cell need enabling */ + if (!(fcr & OH_SCC_ENABLE)) { + fcr |= OH_SCC_ENABLE; + if (htw) { + /* Side effect: this will also power up the + * modem, but it's too messy to figure out on which + * ports this controls the tranceiver and on which + * it controls the modem + */ + if (trans) + fcr &= ~HRW_SCC_TRANS_EN_N; + MACIO_OUT32(OHARE_FCR, fcr); + fcr |= (rmask = HRW_RESET_SCC); + MACIO_OUT32(OHARE_FCR, fcr); + } else { + fcr |= (rmask = OH_SCC_RESET); + MACIO_OUT32(OHARE_FCR, fcr); + } + UNLOCK(flags); + (void)MACIO_IN32(OHARE_FCR); + mdelay(15); + LOCK(flags); + fcr &= ~rmask; + MACIO_OUT32(OHARE_FCR, fcr); + } + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr |= OH_SCCA_IO; + if (chan_mask & MACIO_FLAG_SCCB_ON) + fcr |= OH_SCCB_IO; + MACIO_OUT32(OHARE_FCR, fcr); + macio->flags |= chan_mask; + UNLOCK(flags); + if (param & PMAC_SCC_FLAG_XMON) + macio->flags |= MACIO_FLAG_SCC_LOCKED; + } else { + if (macio->flags & MACIO_FLAG_SCC_LOCKED) + return -EPERM; + LOCK(flags); + fcr = MACIO_IN32(OHARE_FCR); + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr &= ~OH_SCCA_IO; + if (chan_mask & MACIO_FLAG_SCCB_ON) + fcr &= ~OH_SCCB_IO; + MACIO_OUT32(OHARE_FCR, fcr); + if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) { + fcr &= ~OH_SCC_ENABLE; + if (htw && trans) + fcr |= HRW_SCC_TRANS_EN_N; + MACIO_OUT32(OHARE_FCR, fcr); + } + macio->flags &= ~(chan_mask); + UNLOCK(flags); + mdelay(10); +#ifdef CONFIG_ADB_PMU + if ((param & 0xfff) == PMAC_SCC_IRDA) + pmu_enable_irled(0); +#endif /* CONFIG_ADB_PMU */ + } + return 0; +} + +static long ohare_floppy_enable(struct device_node *node, long param, + long value) +{ + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_FLOPPY_ENABLE, value); +} + +static long ohare_mesh_enable(struct device_node *node, long param, long value) +{ + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_MESH_ENABLE, value); +} + +static long ohare_ide_enable(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + /* For some reason, setting the bit in set_initial_features() + * doesn't stick. I'm still investigating... --BenH. + */ + if (value) + simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IOBUS_ENABLE, 1); + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_BAY_IDE_ENABLE, value); + default: + return -ENODEV; + } +} + +static long ohare_ide_reset(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE1_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long ohare_sleep_state(struct device_node *node, long param, long value) +{ + struct macio_chip* macio = &macio_chips[0]; + + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + if (value == 1) { + MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE); + } else if (value == 0) { + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } + + return 0; +} + +static long heathrow_modem_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + macio = macio_find(node, macio_unknown); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1; + if (!value) { + LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + mdelay(250); + } + if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && + pmac_mb.model_id != PMAC_TYPE_YIKES) { + LOCK(flags); + if (value) + MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + else + MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(250); + } + if (value) { + LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long heathrow_floppy_enable(struct device_node *node, long param, + long value) +{ + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, + HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE, + value); +} + +static long heathrow_mesh_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, macio_unknown); + if (!macio) + return -ENODEV; + LOCK(flags); + /* Set clear mesh cell enable */ + if (value) + MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE); + else + MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE); + (void)MACIO_IN32(HEATHROW_FCR); + udelay(10); + /* Set/Clear termination power */ + if (value) + MACIO_BIC(HEATHROW_MBCR, 0x04000000); + else + MACIO_BIS(HEATHROW_MBCR, 0x04000000); + (void)MACIO_IN32(HEATHROW_MBCR); + udelay(10); + UNLOCK(flags); + + return 0; +} + +static long heathrow_ide_enable(struct device_node *node, long param, + long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value); + default: + return -ENODEV; + } +} + +static long heathrow_ide_reset(struct device_node *node, long param, + long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE1_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long heathrow_bmac_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (value) { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); + MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(10); + LOCK(flags); + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(10); + } else { + LOCK(flags); + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); + UNLOCK(flags); + } + return 0; +} + +static long heathrow_sound_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + /* B&W G3 and Yikes don't support that properly (the + * sound appear to never come back after beeing shut down). + */ + if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE || + pmac_mb.model_id == PMAC_TYPE_YIKES) + return 0; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (value) { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + } else { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + UNLOCK(flags); + } + return 0; +} + +static u32 save_fcr[6]; +static u32 save_mbcr; +static u32 save_gpio_levels[2]; +static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT]; +static u8 save_gpio_normal[KEYLARGO_GPIO_CNT]; +static u32 save_unin_clock_ctl; +static struct dbdma_regs save_dbdma[13]; +static struct dbdma_regs save_alt_dbdma[13]; + +static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save) +{ + int i; + + /* Save state & config of DBDMA channels */ + for (i = 0; i < 13; i++) { + volatile struct dbdma_regs __iomem * chan = (void __iomem *) + (macio->base + ((0x8000+i*0x100)>>2)); + save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi); + save[i].cmdptr = in_le32(&chan->cmdptr); + save[i].intr_sel = in_le32(&chan->intr_sel); + save[i].br_sel = in_le32(&chan->br_sel); + save[i].wait_sel = in_le32(&chan->wait_sel); + } +} + +static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save) +{ + int i; + + /* Save state & config of DBDMA channels */ + for (i = 0; i < 13; i++) { + volatile struct dbdma_regs __iomem * chan = (void __iomem *) + (macio->base + ((0x8000+i*0x100)>>2)); + out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16); + while (in_le32(&chan->status) & ACTIVE) + mb(); + out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi); + out_le32(&chan->cmdptr, save[i].cmdptr); + out_le32(&chan->intr_sel, save[i].intr_sel); + out_le32(&chan->br_sel, save[i].br_sel); + out_le32(&chan->wait_sel, save[i].wait_sel); + } +} + +static void heathrow_sleep(struct macio_chip *macio, int secondary) +{ + if (secondary) { + dbdma_save(macio, save_alt_dbdma); + save_fcr[2] = MACIO_IN32(0x38); + save_fcr[3] = MACIO_IN32(0x3c); + } else { + dbdma_save(macio, save_dbdma); + save_fcr[0] = MACIO_IN32(0x38); + save_fcr[1] = MACIO_IN32(0x3c); + save_mbcr = MACIO_IN32(0x34); + /* Make sure sound is shut down */ + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + /* This seems to be necessary as well or the fan + * keeps coming up and battery drains fast */ + MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N); + /* Make sure eth is down even if module or sleep + * won't work properly */ + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET); + } + /* Make sure modem is shut down */ + MACIO_OUT8(HRW_GPIO_MODEM_RESET, + MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1); + MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE); + + /* Let things settle */ + (void)MACIO_IN32(HEATHROW_FCR); +} + +static void heathrow_wakeup(struct macio_chip *macio, int secondary) +{ + if (secondary) { + MACIO_OUT32(0x38, save_fcr[2]); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x3c, save_fcr[3]); + (void)MACIO_IN32(0x38); + mdelay(10); + dbdma_restore(macio, save_alt_dbdma); + } else { + MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x3c, save_fcr[1]); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x34, save_mbcr); + (void)MACIO_IN32(0x38); + mdelay(10); + dbdma_restore(macio, save_dbdma); + } +} + +static long heathrow_sleep_state(struct device_node *node, long param, + long value) +{ + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + if (value == 1) { + if (macio_chips[1].type == macio_gatwick) + heathrow_sleep(&macio_chips[0], 1); + heathrow_sleep(&macio_chips[0], 0); + } else if (value == 0) { + heathrow_wakeup(&macio_chips[0], 0); + if (macio_chips[1].type == macio_gatwick) + heathrow_wakeup(&macio_chips[0], 1); + } + return 0; +} + +static long core99_scc_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + unsigned long chan_mask; + u32 fcr; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (!strcmp(node->name, "ch-a")) + chan_mask = MACIO_FLAG_SCCA_ON; + else if (!strcmp(node->name, "ch-b")) + chan_mask = MACIO_FLAG_SCCB_ON; + else + return -ENODEV; + + if (value) { + int need_reset_scc = 0; + int need_reset_irda = 0; + + LOCK(flags); + fcr = MACIO_IN32(KEYLARGO_FCR0); + /* Check if scc cell need enabling */ + if (!(fcr & KL0_SCC_CELL_ENABLE)) { + fcr |= KL0_SCC_CELL_ENABLE; + need_reset_scc = 1; + } + if (chan_mask & MACIO_FLAG_SCCA_ON) { + fcr |= KL0_SCCA_ENABLE; + /* Don't enable line drivers for I2S modem */ + if ((param & 0xfff) == PMAC_SCC_I2S1) + fcr &= ~KL0_SCC_A_INTF_ENABLE; + else + fcr |= KL0_SCC_A_INTF_ENABLE; + } + if (chan_mask & MACIO_FLAG_SCCB_ON) { + fcr |= KL0_SCCB_ENABLE; + /* Perform irda specific inits */ + if ((param & 0xfff) == PMAC_SCC_IRDA) { + fcr &= ~KL0_SCC_B_INTF_ENABLE; + fcr |= KL0_IRDA_ENABLE; + fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE; + fcr |= KL0_IRDA_SOURCE1_SEL; + fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); + fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); + need_reset_irda = 1; + } else + fcr |= KL0_SCC_B_INTF_ENABLE; + } + MACIO_OUT32(KEYLARGO_FCR0, fcr); + macio->flags |= chan_mask; + if (need_reset_scc) { + MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(15); + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET); + } + if (need_reset_irda) { + MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(15); + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET); + } + UNLOCK(flags); + if (param & PMAC_SCC_FLAG_XMON) + macio->flags |= MACIO_FLAG_SCC_LOCKED; + } else { + if (macio->flags & MACIO_FLAG_SCC_LOCKED) + return -EPERM; + LOCK(flags); + fcr = MACIO_IN32(KEYLARGO_FCR0); + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr &= ~KL0_SCCA_ENABLE; + if (chan_mask & MACIO_FLAG_SCCB_ON) { + fcr &= ~KL0_SCCB_ENABLE; + /* Perform irda specific clears */ + if ((param & 0xfff) == PMAC_SCC_IRDA) { + fcr &= ~KL0_IRDA_ENABLE; + fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE); + fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); + fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); + } + } + MACIO_OUT32(KEYLARGO_FCR0, fcr); + if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) { + fcr &= ~KL0_SCC_CELL_ENABLE; + MACIO_OUT32(KEYLARGO_FCR0, fcr); + } + macio->flags &= ~(chan_mask); + UNLOCK(flags); + mdelay(10); + } + return 0; +} + +static long +core99_modem_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + /* Hack for internal USB modem */ + if (node == NULL) { + if (macio_chips[0].type != macio_keylargo) + return -ENODEV; + node = macio_chips[0].of_node; + } + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); + gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; + gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; + + if (!value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + mdelay(250); + } + LOCK(flags); + if (value) { + MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR2); + mdelay(250); + } else { + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + UNLOCK(flags); + } + if (value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long +pangea_modem_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + /* Hack for internal USB modem */ + if (node == NULL) { + if (macio_chips[0].type != macio_pangea && + macio_chips[0].type != macio_intrepid) + return -ENODEV; + node = macio_chips[0].of_node; + } + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); + gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; + gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; + + if (!value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + mdelay(250); + } + LOCK(flags); + if (value) { + MACIO_OUT8(KL_GPIO_MODEM_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR2); + mdelay(250); + } else { + MACIO_OUT8(KL_GPIO_MODEM_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); + UNLOCK(flags); + } + if (value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long +core99_ata100_enable(struct device_node *node, long value) +{ + unsigned long flags; + struct pci_dev *pdev = NULL; + u8 pbus, pid; + + if (uninorth_rev < 0x24) + return -ENODEV; + + LOCK(flags); + if (value) + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); + else + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); + (void)UN_IN(UNI_N_CLOCK_CNTL); + UNLOCK(flags); + udelay(20); + + if (value) { + if (pci_device_from_OF_node(node, &pbus, &pid) == 0) + pdev = pci_find_slot(pbus, pid); + if (pdev == NULL) + return 0; + pci_enable_device(pdev); + pci_set_master(pdev); + } + return 0; +} + +static long +core99_ide_enable(struct device_node *node, long param, long value) +{ + /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2 + * based ata-100 + */ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value); + case 2: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_UIDE_ENABLE, value); + case 3: + return core99_ata100_enable(node, value); + default: + return -ENODEV; + } +} + +static long +core99_ide_reset(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value); + case 2: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long +core99_gmac_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + LOCK(flags); + if (value) + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); + else + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); + (void)UN_IN(UNI_N_CLOCK_CNTL); + UNLOCK(flags); + udelay(20); + + return 0; +} + +static long +core99_gmac_phy_reset(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + LOCK(flags); + MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET); + UNLOCK(flags); + mdelay(10); + LOCK(flags); + MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */ + KEYLARGO_GPIO_OUTOUT_DATA); + UNLOCK(flags); + mdelay(10); + + return 0; +} + +static long +core99_sound_chip_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + + /* Do a better probe code, screamer G4 desktops & + * iMacs can do that too, add a recalibrate in + * the driver as well + */ + if (pmac_mb.model_id == PMAC_TYPE_PISMO || + pmac_mb.model_id == PMAC_TYPE_TITANIUM) { + LOCK(flags); + if (value) + MACIO_OUT8(KL_GPIO_SOUND_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE | + KEYLARGO_GPIO_OUTOUT_DATA); + else + MACIO_OUT8(KL_GPIO_SOUND_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(KL_GPIO_SOUND_POWER); + UNLOCK(flags); + } + return 0; +} + +static long +core99_airport_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + int state; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + + /* Hint: we allow passing of macio itself for the sake of the + * sleep code + */ + if (node != macio->of_node && + (!node->parent || node->parent != macio->of_node)) + return -ENODEV; + state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0; + if (value == state) + return 0; + if (value) { + /* This code is a reproduction of OF enable-cardslot + * and init-wireless methods, slightly hacked until + * I got it working. + */ + LOCK(flags); + MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); + UNLOCK(flags); + mdelay(10); + LOCK(flags); + MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); + UNLOCK(flags); + + mdelay(10); + + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe); + UNLOCK(flags); + udelay(10); + MACIO_OUT32(0x1c000, 0); + mdelay(1); + MACIO_OUT8(0x1a3e0, 0x41); + (void)MACIO_IN8(0x1a3e0); + udelay(10); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + UNLOCK(flags); + mdelay(100); + + macio->flags |= MACIO_FLAG_AIRPORT_ON; + } else { + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + MACIO_OUT8(KL_GPIO_AIRPORT_0, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_1, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_2, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_3, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_4, 0); + (void)MACIO_IN8(KL_GPIO_AIRPORT_4); + UNLOCK(flags); + + macio->flags &= ~MACIO_FLAG_AIRPORT_ON; + } + return 0; +} + +#ifdef CONFIG_SMP +static long +core99_reset_cpu(struct device_node *node, long param, long value) +{ + unsigned int reset_io = 0; + unsigned long flags; + struct macio_chip *macio; + struct device_node *np; + const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0, + KL_GPIO_RESET_CPU1, + KL_GPIO_RESET_CPU2, + KL_GPIO_RESET_CPU3 }; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo) + return -ENODEV; + + np = find_path_device("/cpus"); + if (np == NULL) + return -ENODEV; + for (np = np->child; np != NULL; np = np->sibling) { + u32 *num = (u32 *)get_property(np, "reg", NULL); + u32 *rst = (u32 *)get_property(np, "soft-reset", NULL); + if (num == NULL || rst == NULL) + continue; + if (param == *num) { + reset_io = *rst; + break; + } + } + if (np == NULL || reset_io == 0) + reset_io = dflt_reset_lines[param]; + + LOCK(flags); + MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(reset_io); + udelay(1); + MACIO_OUT8(reset_io, 0); + (void)MACIO_IN8(reset_io); + UNLOCK(flags); + + return 0; +} +#endif /* CONFIG_SMP */ + +static long +core99_usb_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio; + unsigned long flags; + char *prop; + int number; + u32 reg; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + prop = (char *)get_property(node, "AAPL,clock-id", NULL); + if (!prop) + return -ENODEV; + if (strncmp(prop, "usb0u048", 8) == 0) + number = 0; + else if (strncmp(prop, "usb1u148", 8) == 0) + number = 2; + else if (strncmp(prop, "usb2u248", 8) == 0) + number = 4; + else + return -ENODEV; + + /* Sorry for the brute-force locking, but this is only used during + * sleep and the timing seem to be critical + */ + LOCK(flags); + if (value) { + /* Turn ON */ + if (number == 0) { + MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); + } else if (number == 2) { + MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); + } else if (number == 4) { + MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR1); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE); + } + if (number < 4) { + reg = MACIO_IN32(KEYLARGO_FCR4); + reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | + KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number)); + reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | + KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1)); + MACIO_OUT32(KEYLARGO_FCR4, reg); + (void)MACIO_IN32(KEYLARGO_FCR4); + udelay(10); + } else { + reg = MACIO_IN32(KEYLARGO_FCR3); + reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | + KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0)); + reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | + KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1)); + MACIO_OUT32(KEYLARGO_FCR3, reg); + (void)MACIO_IN32(KEYLARGO_FCR3); + udelay(10); + } + if (macio->type == macio_intrepid) { + /* wait for clock stopped bits to clear */ + u32 test0 = 0, test1 = 0; + u32 status0, status1; + int timeout = 1000; + + UNLOCK(flags); + switch (number) { + case 0: + test0 = UNI_N_CLOCK_STOPPED_USB0; + test1 = UNI_N_CLOCK_STOPPED_USB0PCI; + break; + case 2: + test0 = UNI_N_CLOCK_STOPPED_USB1; + test1 = UNI_N_CLOCK_STOPPED_USB1PCI; + break; + case 4: + test0 = UNI_N_CLOCK_STOPPED_USB2; + test1 = UNI_N_CLOCK_STOPPED_USB2PCI; + break; + } + do { + if (--timeout <= 0) { + printk(KERN_ERR "core99_usb_enable: " + "Timeout waiting for clocks\n"); + break; + } + mdelay(1); + status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0); + status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1); + } while ((status0 & test0) | (status1 & test1)); + LOCK(flags); + } + } else { + /* Turn OFF */ + if (number < 4) { + reg = MACIO_IN32(KEYLARGO_FCR4); + reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | + KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number); + reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | + KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1); + MACIO_OUT32(KEYLARGO_FCR4, reg); + (void)MACIO_IN32(KEYLARGO_FCR4); + udelay(1); + } else { + reg = MACIO_IN32(KEYLARGO_FCR3); + reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | + KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0); + reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | + KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1); + MACIO_OUT32(KEYLARGO_FCR3, reg); + (void)MACIO_IN32(KEYLARGO_FCR3); + udelay(1); + } + if (number == 0) { + if (macio->type != macio_intrepid) + MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); + (void)MACIO_IN32(KEYLARGO_FCR0); + udelay(1); + MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + } else if (number == 2) { + if (macio->type != macio_intrepid) + MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); + (void)MACIO_IN32(KEYLARGO_FCR0); + udelay(1); + MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + } else if (number == 4) { + udelay(1); + MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR1); + } + udelay(1); + } + UNLOCK(flags); + + return 0; +} + +static long +core99_firewire_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) + return -ENODEV; + + LOCK(flags); + if (value) { + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); + (void)UN_IN(UNI_N_CLOCK_CNTL); + } else { + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); + (void)UN_IN(UNI_N_CLOCK_CNTL); + } + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long +core99_firewire_cable_power(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + /* Trick: we allow NULL node */ + if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0) + return -ENODEV; + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0); + MACIO_IN8(KL_GPIO_FW_CABLE_POWER); + udelay(10); + } else { + MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4); + MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10); + } + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long +intrepid_aack_delay_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + if (uninorth_rev < 0xd2) + return -ENODEV; + + LOCK(flags); + if (param) + UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); + else + UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); + UNLOCK(flags); + + return 0; +} + + +#endif /* CONFIG_POWER4 */ + +static long +core99_read_gpio(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + + return MACIO_IN8(param); +} + + +static long +core99_write_gpio(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + + MACIO_OUT8(param, (u8)(value & 0xff)); + return 0; +} + +#ifdef CONFIG_POWER4 +static long g5_gmac_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (node == NULL) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); + mb(); + k2_skiplist[0] = NULL; + } else { + k2_skiplist[0] = node; + mb(); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); + } + + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long g5_fw_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (node == NULL) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); + mb(); + k2_skiplist[1] = NULL; + } else { + k2_skiplist[1] = node; + mb(); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); + } + + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long g5_mpic_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + if (node->parent == NULL || strcmp(node->parent->name, "u3")) + return 0; + + LOCK(flags); + UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE); + UNLOCK(flags); + + return 0; +} + +static long g5_eth_phy_reset(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + struct device_node *phy; + int need_reset; + + /* + * We must not reset the combo PHYs, only the BCM5221 found in + * the iMac G5. + */ + phy = of_get_next_child(node, NULL); + if (!phy) + return -ENODEV; + need_reset = device_is_compatible(phy, "B5221"); + of_node_put(phy); + if (!need_reset) + return 0; + + /* PHY reset is GPIO 29, not in device-tree unfortunately */ + MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, + KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); + /* Thankfully, this is now always called at a time when we can + * schedule by sungem. + */ + msleep(10); + MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0); + + return 0; +} + +static long g5_i2s_enable(struct device_node *node, long param, long value) +{ + /* Very crude implementation for now */ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (value == 0) + return 0; /* don't disable yet */ + + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR3, KL3_CLK45_ENABLE | KL3_CLK49_ENABLE | + KL3_I2S0_CLK18_ENABLE); + udelay(10); + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_I2S0_CELL_ENABLE | + K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE); + udelay(10); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_I2S0_RESET); + UNLOCK(flags); + udelay(10); + + return 0; +} + + +#ifdef CONFIG_SMP +static long g5_reset_cpu(struct device_node *node, long param, long value) +{ + unsigned int reset_io = 0; + unsigned long flags; + struct macio_chip *macio; + struct device_node *np; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo2) + return -ENODEV; + + np = find_path_device("/cpus"); + if (np == NULL) + return -ENODEV; + for (np = np->child; np != NULL; np = np->sibling) { + u32 *num = (u32 *)get_property(np, "reg", NULL); + u32 *rst = (u32 *)get_property(np, "soft-reset", NULL); + if (num == NULL || rst == NULL) + continue; + if (param == *num) { + reset_io = *rst; + break; + } + } + if (np == NULL || reset_io == 0) + return -ENODEV; + + LOCK(flags); + MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(reset_io); + udelay(1); + MACIO_OUT8(reset_io, 0); + (void)MACIO_IN8(reset_io); + UNLOCK(flags); + + return 0; +} +#endif /* CONFIG_SMP */ + +/* + * This can be called from pmac_smp so isn't static + * + * This takes the second CPU off the bus on dual CPU machines + * running UP + */ +void g5_phy_disable_cpu1(void) +{ + UN_OUT(U3_API_PHY_CONFIG_1, 0); +} +#endif /* CONFIG_POWER4 */ + +#ifndef CONFIG_POWER4 + +static void +keylargo_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + if (sleep_mode) { + mdelay(1); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND); + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(1); + } + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE | + KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE | + KL0_IRDA_CLK19_ENABLE); + + MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK); + MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | + KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N | + KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N | + KL1_UIDE_ENABLE); + + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE); + + temp = MACIO_IN32(KEYLARGO_FCR3); + if (macio->rev >= 2) { + temp |= KL3_SHUTDOWN_PLL2X; + if (sleep_mode) + temp |= KL3_SHUTDOWN_PLL_TOTAL; + } + + temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | + KL3_SHUTDOWN_PLLKW35; + if (sleep_mode) + temp |= KL3_SHUTDOWN_PLLKW12; + temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE + | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); +} + +static void +pangea_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE | + KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | + KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_UIDE_ENABLE); + if (pmac_mb.board_flags & PMAC_MB_MOBILE) + MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); + + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + + temp = MACIO_IN32(KEYLARGO_FCR3); + temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | + KL3_SHUTDOWN_PLLKW35; + temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE + | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); +} + +static void +intrepid_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + /*KL1_USB2_CELL_ENABLE |*/ + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE); + if (pmac_mb.board_flags & PMAC_MB_MOBILE) + MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); + + temp = MACIO_IN32(KEYLARGO_FCR3); + temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | + KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(10); +} + + +void pmac_tweak_clock_spreading(int enable) +{ + struct macio_chip *macio = &macio_chips[0]; + + /* Hack for doing clock spreading on some machines PowerBooks and + * iBooks. This implements the "platform-do-clockspreading" OF + * property as decoded manually on various models. For safety, we also + * check the product ID in the device-tree in cases we'll whack the i2c + * chip to make reasonably sure we won't set wrong values in there + * + * Of course, ultimately, we have to implement a real parser for + * the platform-do-* stuff... + */ + + if (macio->type == macio_intrepid) { + if (enable) + UN_OUT(UNI_N_CLOCK_SPREADING, 2); + else + UN_OUT(UNI_N_CLOCK_SPREADING, 0); + mdelay(40); + } + + while (machine_is_compatible("PowerBook5,2") || + machine_is_compatible("PowerBook5,3") || + machine_is_compatible("PowerBook6,2") || + machine_is_compatible("PowerBook6,3")) { + struct device_node *ui2c = of_find_node_by_type(NULL, "i2c"); + struct device_node *dt = of_find_node_by_name(NULL, "device-tree"); + u8 buffer[9]; + u32 *productID; + int i, rc, changed = 0; + + if (dt == NULL) + break; + productID = (u32 *)get_property(dt, "pid#", NULL); + if (productID == NULL) + break; + while(ui2c) { + struct device_node *p = of_get_parent(ui2c); + if (p && !strcmp(p->name, "uni-n")) + break; + ui2c = of_find_node_by_type(ui2c, "i2c"); + } + if (ui2c == NULL) + break; + DBG("Trying to bump clock speed for PID: %08x...\n", *productID); + rc = pmac_low_i2c_open(ui2c, 1); + if (rc != 0) + break; + pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined); + rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9); + DBG("read result: %d,", rc); + if (rc != 0) { + pmac_low_i2c_close(ui2c); + break; + } + for (i=0; i<9; i++) + DBG(" %02x", buffer[i]); + DBG("\n"); + + switch(*productID) { + case 0x1182: /* AlBook 12" rev 2 */ + case 0x1183: /* iBook G4 12" */ + buffer[0] = (buffer[0] & 0x8f) | 0x70; + buffer[2] = (buffer[2] & 0x7f) | 0x00; + buffer[5] = (buffer[5] & 0x80) | 0x31; + buffer[6] = (buffer[6] & 0x40) | 0xb0; + buffer[7] = (buffer[7] & 0x00) | (enable ? 0xc0 : 0xba); + buffer[8] = (buffer[8] & 0x00) | 0x30; + changed = 1; + break; + case 0x3142: /* AlBook 15" (ATI M10) */ + case 0x3143: /* AlBook 17" (ATI M10) */ + buffer[0] = (buffer[0] & 0xaf) | 0x50; + buffer[2] = (buffer[2] & 0x7f) | 0x00; + buffer[5] = (buffer[5] & 0x80) | 0x31; + buffer[6] = (buffer[6] & 0x40) | 0xb0; + buffer[7] = (buffer[7] & 0x00) | (enable ? 0xd0 : 0xc0); + buffer[8] = (buffer[8] & 0x00) | 0x30; + changed = 1; + break; + default: + DBG("i2c-hwclock: Machine model not handled\n"); + break; + } + if (!changed) { + pmac_low_i2c_close(ui2c); + break; + } + pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub); + rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9); + DBG("write result: %d,", rc); + pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined); + rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9); + DBG("read result: %d,", rc); + if (rc != 0) { + pmac_low_i2c_close(ui2c); + break; + } + for (i=0; i<9; i++) + DBG(" %02x", buffer[i]); + pmac_low_i2c_close(ui2c); + break; + } +} + + +static int +core99_sleep(void) +{ + struct macio_chip *macio; + int i; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + /* We power off the wireless slot in case it was not done + * by the driver. We don't power it on automatically however + */ + if (macio->flags & MACIO_FLAG_AIRPORT_ON) + core99_airport_enable(macio->of_node, 0, 0); + + /* We power off the FW cable. Should be done by the driver... */ + if (macio->flags & MACIO_FLAG_FW_SUPPORTED) { + core99_firewire_enable(NULL, 0, 0); + core99_firewire_cable_power(NULL, 0, 0); + } + + /* We make sure int. modem is off (in case driver lost it) */ + if (macio->type == macio_keylargo) + core99_modem_enable(macio->of_node, 0, 0); + else + pangea_modem_enable(macio->of_node, 0, 0); + + /* We make sure the sound is off as well */ + core99_sound_chip_enable(macio->of_node, 0, 0); + + /* + * Save various bits of KeyLargo + */ + + /* Save the state of the various GPIOs */ + save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0); + save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1); + for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) + save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i); + for (i=0; i<KEYLARGO_GPIO_CNT; i++) + save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i); + + /* Save the FCRs */ + if (macio->type == macio_keylargo) + save_mbcr = MACIO_IN32(KEYLARGO_MBCR); + save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0); + save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1); + save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2); + save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3); + save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4); + if (macio->type == macio_pangea || macio->type == macio_intrepid) + save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5); + + /* Save state & config of DBDMA channels */ + dbdma_save(macio, save_dbdma); + + /* + * Turn off as much as we can + */ + if (macio->type == macio_pangea) + pangea_shutdown(macio, 1); + else if (macio->type == macio_intrepid) + intrepid_shutdown(macio, 1); + else if (macio->type == macio_keylargo) + keylargo_shutdown(macio, 1); + + /* + * Put the host bridge to sleep + */ + + save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL); + /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it + * enabled ! + */ + UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl & + ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/)); + udelay(100); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP); + mdelay(10); + + /* + * FIXME: A bit of black magic with OpenPIC (don't ask me why) + */ + if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { + MACIO_BIS(0x506e0, 0x00400000); + MACIO_BIS(0x506e0, 0x80000000); + } + return 0; +} + +static int +core99_wake_up(void) +{ + struct macio_chip *macio; + int i; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + /* + * Wakeup the host bridge + */ + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); + udelay(10); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); + udelay(10); + + /* + * Restore KeyLargo + */ + + if (macio->type == macio_keylargo) { + MACIO_OUT32(KEYLARGO_MBCR, save_mbcr); + (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10); + } + MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]); + (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10); + MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]); + (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10); + MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]); + (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10); + MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]); + (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10); + MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]); + (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10); + if (macio->type == macio_pangea || macio->type == macio_intrepid) { + MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]); + (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10); + } + + dbdma_restore(macio, save_dbdma); + + MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]); + MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]); + for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]); + for (i=0; i<KEYLARGO_GPIO_CNT; i++) + MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]); + + /* FIXME more black magic with OpenPIC ... */ + if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { + MACIO_BIC(0x506e0, 0x00400000); + MACIO_BIC(0x506e0, 0x80000000); + } + + UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl); + udelay(100); + + return 0; +} + +static long +core99_sleep_state(struct device_node *node, long param, long value) +{ + /* Param == 1 means to enter the "fake sleep" mode that is + * used for CPU speed switch + */ + if (param == 1) { + if (value == 1) { + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2); + } else { + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); + udelay(10); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); + udelay(10); + } + return 0; + } + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + + if (value == 1) + return core99_sleep(); + else if (value == 0) + return core99_wake_up(); + return 0; +} + +#endif /* CONFIG_POWER4 */ + +static long +generic_dev_can_wake(struct device_node *node, long param, long value) +{ + /* Todo: eventually check we are really dealing with on-board + * video device ... + */ + + if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP) + pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP; + return 0; +} + +static long generic_get_mb_info(struct device_node *node, long param, long value) +{ + switch(param) { + case PMAC_MB_INFO_MODEL: + return pmac_mb.model_id; + case PMAC_MB_INFO_FLAGS: + return pmac_mb.board_flags; + case PMAC_MB_INFO_NAME: + /* hack hack hack... but should work */ + *((const char **)value) = pmac_mb.model_name; + return 0; + } + return -EINVAL; +} + + +/* + * Table definitions + */ + +/* Used on any machine + */ +static struct feature_table_entry any_features[] = { + { PMAC_FTR_GET_MB_INFO, generic_get_mb_info }, + { PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake }, + { 0, NULL } +}; + +#ifndef CONFIG_POWER4 + +/* OHare based motherboards. Currently, we only use these on the + * 2400,3400 and 3500 series powerbooks. Some older desktops seem + * to have issues with turning on/off those asic cells + */ +static struct feature_table_entry ohare_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, ohare_ide_enable}, + { PMAC_FTR_IDE_RESET, ohare_ide_reset}, + { PMAC_FTR_SLEEP_STATE, ohare_sleep_state }, + { 0, NULL } +}; + +/* Heathrow desktop machines (Beige G3). + * Separated as some features couldn't be properly tested + * and the serial port control bits appear to confuse it. + */ +static struct feature_table_entry heathrow_desktop_features[] = { + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { 0, NULL } +}; + +/* Heathrow based laptop, that is the Wallstreet and mainstreet + * powerbooks. + */ +static struct feature_table_entry heathrow_laptop_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, + { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, + { 0, NULL } +}; + +/* Paddington based machines + * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4. + */ +static struct feature_table_entry paddington_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, + { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, + { 0, NULL } +}; + +/* Core99 & MacRISC 2 machines (all machines released since the + * iBook (included), that is all AGP machines, except pangea + * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo + * used on iBook2 & iMac "flow power". + */ +static struct feature_table_entry core99_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, core99_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, core99_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* RackMac + */ +static struct feature_table_entry rackmac_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, core99_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* Pangea features + */ +static struct feature_table_entry pangea_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* Intrepid features + */ +static struct feature_table_entry intrepid_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable }, + { 0, NULL } +}; + +#else /* CONFIG_POWER4 */ + +/* G5 features + */ +static struct feature_table_entry g5_features[] = { + { PMAC_FTR_GMAC_ENABLE, g5_gmac_enable }, + { PMAC_FTR_1394_ENABLE, g5_fw_enable }, + { PMAC_FTR_ENABLE_MPIC, g5_mpic_enable }, + { PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, g5_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +#endif /* CONFIG_POWER4 */ + +static struct pmac_mb_def pmac_mb_defs[] = { +#ifndef CONFIG_POWER4 + /* + * Desktops + */ + + { "AAPL,8500", "PowerMac 8500/8600", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,9500", "PowerMac 9500/9600", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7200", "PowerMac 7200", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7300", "PowerMac 7200/7300", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7500", "PowerMac 7500", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,ShinerESB", "Apple Network Server", + PMAC_TYPE_ANS, NULL, + 0 + }, + { "AAPL,e407", "Alchemy", + PMAC_TYPE_ALCHEMY, NULL, + 0 + }, + { "AAPL,e411", "Gazelle", + PMAC_TYPE_GAZELLE, NULL, + 0 + }, + { "AAPL,Gossamer", "PowerMac G3 (Gossamer)", + PMAC_TYPE_GOSSAMER, heathrow_desktop_features, + 0 + }, + { "AAPL,PowerMac G3", "PowerMac G3 (Silk)", + PMAC_TYPE_SILK, heathrow_desktop_features, + 0 + }, + { "PowerMac1,1", "Blue&White G3", + PMAC_TYPE_YOSEMITE, paddington_features, + 0 + }, + { "PowerMac1,2", "PowerMac G4 PCI Graphics", + PMAC_TYPE_YIKES, paddington_features, + 0 + }, + { "PowerMac2,1", "iMac FireWire", + PMAC_TYPE_FW_IMAC, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac2,2", "iMac FireWire", + PMAC_TYPE_FW_IMAC, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,1", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,2", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,3", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,4", "PowerMac G4 Silver", + PMAC_TYPE_QUICKSILVER, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac3,5", "PowerMac G4 Silver", + PMAC_TYPE_QUICKSILVER, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac3,6", "PowerMac G4 Windtunnel", + PMAC_TYPE_WINDTUNNEL, core99_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac4,1", "iMac \"Flower Power\"", + PMAC_TYPE_PANGEA_IMAC, pangea_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac4,2", "Flat panel iMac", + PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features, + PMAC_MB_CAN_SLEEP + }, + { "PowerMac4,4", "eMac", + PMAC_TYPE_EMAC, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac5,1", "PowerMac G4 Cube", + PMAC_TYPE_CUBE, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac6,1", "Flat panel iMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac6,3", "Flat panel iMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac6,4", "eMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac10,1", "Mac mini", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER, + }, + { "iMac,1", "iMac (first generation)", + PMAC_TYPE_ORIG_IMAC, paddington_features, + 0 + }, + + /* + * Xserve's + */ + + { "RackMac1,1", "XServe", + PMAC_TYPE_RACKMAC, rackmac_features, + 0, + }, + { "RackMac1,2", "XServe rev. 2", + PMAC_TYPE_RACKMAC, rackmac_features, + 0, + }, + + /* + * Laptops + */ + + { "AAPL,3400/2400", "PowerBook 3400", + PMAC_TYPE_HOOPER, ohare_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "AAPL,3500", "PowerBook 3500", + PMAC_TYPE_KANGA, ohare_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "AAPL,PowerBook1998", "PowerBook Wallstreet", + PMAC_TYPE_WALLSTREET, heathrow_laptop_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "PowerBook1,1", "PowerBook 101 (Lombard)", + PMAC_TYPE_101_PBOOK, paddington_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "PowerBook2,1", "iBook (first generation)", + PMAC_TYPE_ORIG_IBOOK, core99_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook2,2", "iBook FireWire", + PMAC_TYPE_FW_IBOOK, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | + PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook3,1", "PowerBook Pismo", + PMAC_TYPE_PISMO, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | + PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook3,2", "PowerBook Titanium", + PMAC_TYPE_TITANIUM, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,3", "PowerBook Titanium II", + PMAC_TYPE_TITANIUM2, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,4", "PowerBook Titanium III", + PMAC_TYPE_TITANIUM3, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,5", "PowerBook Titanium IV", + PMAC_TYPE_TITANIUM4, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,1", "iBook 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,2", "iBook 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,3", "iBook 2 rev. 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook5,1", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,2", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,3", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,4", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,5", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,6", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,7", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,1", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,2", "PowerBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,3", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,4", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,5", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,7", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,8", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, +#else /* CONFIG_POWER4 */ + { "PowerMac7,2", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5, g5_features, + 0, + }, +#ifdef CONFIG_PPC64 + { "PowerMac7,3", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5, g5_features, + 0, + }, + { "PowerMac8,1", "iMac G5", + PMAC_TYPE_IMAC_G5, g5_features, + 0, + }, + { "PowerMac9,1", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "RackMac3,1", "XServe G5", + PMAC_TYPE_XSERVE_G5, g5_features, + 0, + }, +#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_POWER4 */ +}; + +/* + * The toplevel feature_call callback + */ +long pmac_do_feature_call(unsigned int selector, ...) +{ + struct device_node *node; + long param, value; + int i; + feature_call func = NULL; + va_list args; + + if (pmac_mb.features) + for (i=0; pmac_mb.features[i].function; i++) + if (pmac_mb.features[i].selector == selector) { + func = pmac_mb.features[i].function; + break; + } + if (!func) + for (i=0; any_features[i].function; i++) + if (any_features[i].selector == selector) { + func = any_features[i].function; + break; + } + if (!func) + return -ENODEV; + + va_start(args, selector); + node = (struct device_node*)va_arg(args, void*); + param = va_arg(args, long); + value = va_arg(args, long); + va_end(args); + + return func(node, param, value); +} + +static int __init probe_motherboard(void) +{ + int i; + struct macio_chip *macio = &macio_chips[0]; + const char *model = NULL; + struct device_node *dt; + + /* Lookup known motherboard type in device-tree. First try an + * exact match on the "model" property, then try a "compatible" + * match is none is found. + */ + dt = find_devices("device-tree"); + if (dt != NULL) + model = (const char *) get_property(dt, "model", NULL); + for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { + if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { + pmac_mb = pmac_mb_defs[i]; + goto found; + } + } + for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { + if (machine_is_compatible(pmac_mb_defs[i].model_string)) { + pmac_mb = pmac_mb_defs[i]; + goto found; + } + } + + /* Fallback to selection depending on mac-io chip type */ + switch(macio->type) { +#ifndef CONFIG_POWER4 + case macio_grand_central: + pmac_mb.model_id = PMAC_TYPE_PSURGE; + pmac_mb.model_name = "Unknown PowerSurge"; + break; + case macio_ohare: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE; + pmac_mb.model_name = "Unknown OHare-based"; + break; + case macio_heathrow: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW; + pmac_mb.model_name = "Unknown Heathrow-based"; + pmac_mb.features = heathrow_desktop_features; + break; + case macio_paddington: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON; + pmac_mb.model_name = "Unknown Paddington-based"; + pmac_mb.features = paddington_features; + break; + case macio_keylargo: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99; + pmac_mb.model_name = "Unknown Keylargo-based"; + pmac_mb.features = core99_features; + break; + case macio_pangea: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA; + pmac_mb.model_name = "Unknown Pangea-based"; + pmac_mb.features = pangea_features; + break; + case macio_intrepid: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID; + pmac_mb.model_name = "Unknown Intrepid-based"; + pmac_mb.features = intrepid_features; + break; +#else /* CONFIG_POWER4 */ + case macio_keylargo2: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; + pmac_mb.model_name = "Unknown K2-based"; + pmac_mb.features = g5_features; + break; +#endif /* CONFIG_POWER4 */ + default: + return -ENODEV; + } +found: +#ifndef CONFIG_POWER4 + /* Fixup Hooper vs. Comet */ + if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { + u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); + if (!mach_id_ptr) + return -ENODEV; + /* Here, I used to disable the media-bay on comet. It + * appears this is wrong, the floppy connector is actually + * a kind of media-bay and works with the current driver. + */ + if (__raw_readl(mach_id_ptr) & 0x20000000UL) + pmac_mb.model_id = PMAC_TYPE_COMET; + iounmap(mach_id_ptr); + } +#endif /* CONFIG_POWER4 */ + +#ifdef CONFIG_6xx + /* Set default value of powersave_nap on machines that support it. + * It appears that uninorth rev 3 has a problem with it, we don't + * enable it on those. In theory, the flush-on-lock property is + * supposed to be set when not supported, but I'm not very confident + * that all Apple OF revs did it properly, I do it the paranoid way. + */ + while (uninorth_base && uninorth_rev > 3) { + struct device_node *np = find_path_device("/cpus"); + if (!np || !np->child) { + printk(KERN_WARNING "Can't find CPU(s) in device tree !\n"); + break; + } + np = np->child; + /* Nap mode not supported on SMP */ + if (np->sibling) + break; + /* Nap mode not supported if flush-on-lock property is present */ + if (get_property(np, "flush-on-lock", NULL)) + break; + powersave_nap = 1; + printk(KERN_INFO "Processor NAP mode on idle enabled.\n"); + break; + } + + /* On CPUs that support it (750FX), lowspeed by default during + * NAP mode + */ + powersave_lowspeed = 1; +#endif /* CONFIG_6xx */ +#ifdef CONFIG_POWER4 + powersave_nap = 1; +#endif + /* Check for "mobile" machine */ + if (model && (strncmp(model, "PowerBook", 9) == 0 + || strncmp(model, "iBook", 5) == 0)) + pmac_mb.board_flags |= PMAC_MB_MOBILE; + + + printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); + return 0; +} + +/* Initialize the Core99 UniNorth host bridge and memory controller + */ +static void __init probe_uninorth(void) +{ + unsigned long actrl; + + /* Locate core99 Uni-N */ + uninorth_node = of_find_node_by_name(NULL, "uni-n"); + /* Locate G5 u3 */ + if (uninorth_node == NULL) { + uninorth_node = of_find_node_by_name(NULL, "u3"); + uninorth_u3 = 1; + } + if (uninorth_node && uninorth_node->n_addrs > 0) { + unsigned long address = uninorth_node->addrs[0].address; + uninorth_base = ioremap(address, 0x40000); + uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); + if (uninorth_u3) + u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + } else + uninorth_node = NULL; + + if (!uninorth_node) + return; + + printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n", + uninorth_u3 ? "U3" : "UniNorth", uninorth_rev); + printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); + + /* Set the arbitrer QAck delay according to what Apple does + */ + if (uninorth_rev < 0x11) { + actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK; + actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 : + UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; + UN_OUT(UNI_N_ARB_CTRL, actrl); + } + + /* Some more magic as done by them in recent MacOS X on UniNorth + * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI + * memory timeout + */ + if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0) + UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff); +} + +static void __init probe_one_macio(const char *name, const char *compat, int type) +{ + struct device_node* node; + int i; + volatile u32 __iomem * base; + u32* revp; + + node = find_devices(name); + if (!node || !node->n_addrs) + return; + if (compat) + do { + if (device_is_compatible(node, compat)) + break; + node = node->next; + } while (node); + if (!node) + return; + for(i=0; i<MAX_MACIO_CHIPS; i++) { + if (!macio_chips[i].of_node) + break; + if (macio_chips[i].of_node == node) + return; + } + if (i >= MAX_MACIO_CHIPS) { + printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); + printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name); + return; + } + base = ioremap(node->addrs[0].address, node->addrs[0].size); + if (!base) { + printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n"); + return; + } + if (type == macio_keylargo) { + u32 *did = (u32 *)get_property(node, "device-id", NULL); + if (*did == 0x00000025) + type = macio_pangea; + if (*did == 0x0000003e) + type = macio_intrepid; + } + macio_chips[i].of_node = node; + macio_chips[i].type = type; + macio_chips[i].base = base; + macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON; + macio_chips[i].name = macio_names[type]; + revp = (u32 *)get_property(node, "revision-id", NULL); + if (revp) + macio_chips[i].rev = *revp; + printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", + macio_names[type], macio_chips[i].rev, macio_chips[i].base); +} + +static int __init +probe_macios(void) +{ + /* Warning, ordering is important */ + probe_one_macio("gc", NULL, macio_grand_central); + probe_one_macio("ohare", NULL, macio_ohare); + probe_one_macio("pci106b,7", NULL, macio_ohareII); + probe_one_macio("mac-io", "keylargo", macio_keylargo); + probe_one_macio("mac-io", "paddington", macio_paddington); + probe_one_macio("mac-io", "gatwick", macio_gatwick); + probe_one_macio("mac-io", "heathrow", macio_heathrow); + probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2); + + /* Make sure the "main" macio chip appear first */ + if (macio_chips[0].type == macio_gatwick + && macio_chips[1].type == macio_heathrow) { + struct macio_chip temp = macio_chips[0]; + macio_chips[0] = macio_chips[1]; + macio_chips[1] = temp; + } + if (macio_chips[0].type == macio_ohareII + && macio_chips[1].type == macio_ohare) { + struct macio_chip temp = macio_chips[0]; + macio_chips[0] = macio_chips[1]; + macio_chips[1] = temp; + } + macio_chips[0].lbus.index = 0; + macio_chips[1].lbus.index = 1; + + return (macio_chips[0].of_node == NULL) ? -ENODEV : 0; +} + +static void __init +initial_serial_shutdown(struct device_node *np) +{ + int len; + struct slot_names_prop { + int count; + char name[1]; + } *slots; + char *conn; + int port_type = PMAC_SCC_ASYNC; + int modem = 0; + + slots = (struct slot_names_prop *)get_property(np, "slot-names", &len); + conn = get_property(np, "AAPL,connector", &len); + if (conn && (strcmp(conn, "infrared") == 0)) + port_type = PMAC_SCC_IRDA; + else if (device_is_compatible(np, "cobalt")) + modem = 1; + else if (slots && slots->count > 0) { + if (strcmp(slots->name, "IrDA") == 0) + port_type = PMAC_SCC_IRDA; + else if (strcmp(slots->name, "Modem") == 0) + modem = 1; + } + if (modem) + pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0); + pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0); +} + +static void __init +set_initial_features(void) +{ + struct device_node *np; + + /* That hack appears to be necessary for some StarMax motherboards + * but I'm not too sure it was audited for side-effects on other + * ohare based machines... + * Since I still have difficulties figuring the right way to + * differenciate them all and since that hack was there for a long + * time, I'll keep it around + */ + if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) { + struct macio_chip *macio = &macio_chips[0]; + MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES); + } else if (macio_chips[0].type == macio_ohare) { + struct macio_chip *macio = &macio_chips[0]; + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } else if (macio_chips[1].type == macio_ohare) { + struct macio_chip *macio = &macio_chips[1]; + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } + +#ifdef CONFIG_POWER4 + if (macio_chips[0].type == macio_keylargo2) { +#ifndef CONFIG_SMP + /* On SMP machines running UP, we have the second CPU eating + * bus cycles. We need to take it off the bus. This is done + * from pmac_smp for SMP kernels running on one CPU + */ + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) + np = of_find_node_by_type(np, "cpu"); + if (np != NULL) { + g5_phy_disable_cpu1(); + of_node_put(np); + } +#endif /* CONFIG_SMP */ + /* Enable GMAC for now for PCI probing. It will be disabled + * later on after PCI probe + */ + np = of_find_node_by_name(NULL, "ethernet"); + while(np) { + if (device_is_compatible(np, "K2-GMAC")) + g5_gmac_enable(np, 0, 1); + np = of_find_node_by_name(np, "ethernet"); + } + + /* Enable FW before PCI probe. Will be disabled later on + * Note: We should have a batter way to check that we are + * dealing with uninorth internal cell and not a PCI cell + * on the external PCI. The code below works though. + */ + np = of_find_node_by_name(NULL, "firewire"); + while(np) { + if (device_is_compatible(np, "pci106b,5811")) { + macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; + g5_fw_enable(np, 0, 1); + } + np = of_find_node_by_name(np, "firewire"); + } + } +#else /* CONFIG_POWER4 */ + + if (macio_chips[0].type == macio_keylargo || + macio_chips[0].type == macio_pangea || + macio_chips[0].type == macio_intrepid) { + /* Enable GMAC for now for PCI probing. It will be disabled + * later on after PCI probe + */ + np = of_find_node_by_name(NULL, "ethernet"); + while(np) { + if (np->parent + && device_is_compatible(np->parent, "uni-north") + && device_is_compatible(np, "gmac")) + core99_gmac_enable(np, 0, 1); + np = of_find_node_by_name(np, "ethernet"); + } + + /* Enable FW before PCI probe. Will be disabled later on + * Note: We should have a batter way to check that we are + * dealing with uninorth internal cell and not a PCI cell + * on the external PCI. The code below works though. + */ + np = of_find_node_by_name(NULL, "firewire"); + while(np) { + if (np->parent + && device_is_compatible(np->parent, "uni-north") + && (device_is_compatible(np, "pci106b,18") || + device_is_compatible(np, "pci106b,30") || + device_is_compatible(np, "pci11c1,5811"))) { + macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; + core99_firewire_enable(np, 0, 1); + } + np = of_find_node_by_name(np, "firewire"); + } + + /* Enable ATA-100 before PCI probe. */ + np = of_find_node_by_name(NULL, "ata-6"); + while(np) { + if (np->parent + && device_is_compatible(np->parent, "uni-north") + && device_is_compatible(np, "kauai-ata")) { + core99_ata100_enable(np, 1); + } + np = of_find_node_by_name(np, "ata-6"); + } + + /* Switch airport off */ + np = find_devices("radio"); + while(np) { + if (np && np->parent == macio_chips[0].of_node) { + macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON; + core99_airport_enable(np, 0, 0); + } + np = np->next; + } + } + + /* On all machines that support sound PM, switch sound off */ + if (macio_chips[0].of_node) + pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE, + macio_chips[0].of_node, 0, 0); + + /* While on some desktop G3s, we turn it back on */ + if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow + && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER || + pmac_mb.model_id == PMAC_TYPE_SILK)) { + struct macio_chip *macio = &macio_chips[0]; + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); + } + + /* Some machine models need the clock chip to be properly setup for + * clock spreading now. This should be a platform function but we + * don't do these at the moment + */ + pmac_tweak_clock_spreading(1); + +#endif /* CONFIG_POWER4 */ + + /* On all machines, switch modem & serial ports off */ + np = find_devices("ch-a"); + while(np) { + initial_serial_shutdown(np); + np = np->next; + } + np = find_devices("ch-b"); + while(np) { + initial_serial_shutdown(np); + np = np->next; + } +} + +void __init +pmac_feature_init(void) +{ + /* Detect the UniNorth memory controller */ + probe_uninorth(); + + /* Probe mac-io controllers */ + if (probe_macios()) { + printk(KERN_WARNING "No mac-io chip found\n"); + return; + } + + /* Setup low-level i2c stuffs */ + pmac_init_low_i2c(); + + /* Probe machine type */ + if (probe_motherboard()) + printk(KERN_WARNING "Unknown PowerMac !\n"); + + /* Set some initial features (turn off some chips that will + * be later turned on) + */ + set_initial_features(); +} + +int __init pmac_feature_late_init(void) +{ +#if 0 + struct device_node *np; + + /* Request some resources late */ + if (uninorth_node) + request_OF_resource(uninorth_node, 0, NULL); + np = find_devices("hammerhead"); + if (np) + request_OF_resource(np, 0, NULL); + np = find_devices("interrupt-controller"); + if (np) + request_OF_resource(np, 0, NULL); +#endif + return 0; +} + +device_initcall(pmac_feature_late_init); + +#if 0 +static void dump_HT_speeds(char *name, u32 cfg, u32 frq) +{ + int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 }; + int bits[8] = { 8,16,0,32,2,4,0,0 }; + int freq = (frq >> 8) & 0xf; + + if (freqs[freq] == 0) + printk("%s: Unknown HT link frequency %x\n", name, freq); + else + printk("%s: %d MHz on main link, (%d in / %d out) bits width\n", + name, freqs[freq], + bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]); +} + +void __init pmac_check_ht_link(void) +{ + u32 ufreq, freq, ucfg, cfg; + struct device_node *pcix_node; + u8 px_bus, px_devfn; + struct pci_controller *px_hose; + + (void)in_be32(u3_ht + U3_HT_LINK_COMMAND); + ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG); + ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ); + dump_HT_speeds("U3 HyperTransport", cfg, freq); + + pcix_node = of_find_compatible_node(NULL, "pci", "pci-x"); + if (pcix_node == NULL) { + printk("No PCI-X bridge found\n"); + return; + } + if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) { + printk("PCI-X bridge found but not matched to pci\n"); + return; + } + px_hose = pci_find_hose_for_OF_device(pcix_node); + if (px_hose == NULL) { + printk("PCI-X bridge found but not matched to host\n"); + return; + } + early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); + dump_HT_speeds("PCI-X HT Uplink", cfg, freq); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq); + dump_HT_speeds("PCI-X HT Downlink", cfg, freq); +} +#endif /* 0 */ + +/* + * Early video resume hook + */ + +static void (*pmac_early_vresume_proc)(void *data); +static void *pmac_early_vresume_data; + +void pmac_set_early_video_resume(void (*proc)(void *data), void *data) +{ + if (_machine != _MACH_Pmac) + return; + preempt_disable(); + pmac_early_vresume_proc = proc; + pmac_early_vresume_data = data; + preempt_enable(); +} +EXPORT_SYMBOL(pmac_set_early_video_resume); + +void pmac_call_early_video_resume(void) +{ + if (pmac_early_vresume_proc) + pmac_early_vresume_proc(pmac_early_vresume_data); +} + +/* + * AGP related suspend/resume code + */ + +static struct pci_dev *pmac_agp_bridge; +static int (*pmac_agp_suspend)(struct pci_dev *bridge); +static int (*pmac_agp_resume)(struct pci_dev *bridge); + +void pmac_register_agp_pm(struct pci_dev *bridge, + int (*suspend)(struct pci_dev *bridge), + int (*resume)(struct pci_dev *bridge)) +{ + if (suspend || resume) { + pmac_agp_bridge = bridge; + pmac_agp_suspend = suspend; + pmac_agp_resume = resume; + return; + } + if (bridge != pmac_agp_bridge) + return; + pmac_agp_suspend = pmac_agp_resume = NULL; + return; +} +EXPORT_SYMBOL(pmac_register_agp_pm); + +void pmac_suspend_agp_for_card(struct pci_dev *dev) +{ + if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL) + return; + if (pmac_agp_bridge->bus != dev->bus) + return; + pmac_agp_suspend(pmac_agp_bridge); +} +EXPORT_SYMBOL(pmac_suspend_agp_for_card); + +void pmac_resume_agp_for_card(struct pci_dev *dev) +{ + if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL) + return; + if (pmac_agp_bridge->bus != dev->bus) + return; + pmac_agp_resume(pmac_agp_bridge); +} +EXPORT_SYMBOL(pmac_resume_agp_for_card); diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c new file mode 100644 index 00000000000..f3f39e8e337 --- /dev/null +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -0,0 +1,523 @@ +/* + * arch/ppc/platforms/pmac_low_i2c.c + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This file contains some low-level i2c access routines that + * need to be used by various bits of the PowerMac platform code + * at times where the real asynchronous & interrupt driven driver + * cannot be used. The API borrows some semantics from the darwin + * driver in order to ease the implementation of the platform + * properties parser + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <asm/keylargo.h> +#include <asm/uninorth.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pmac_low_i2c.h> + +#define MAX_LOW_I2C_HOST 4 + +#ifdef DEBUG +#define DBG(x...) do {\ + printk(KERN_DEBUG "KW:" x); \ + } while(0) +#else +#define DBG(x...) +#endif + +struct low_i2c_host; + +typedef int (*low_i2c_func_t)(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len); + +struct low_i2c_host +{ + struct device_node *np; /* OF device node */ + struct semaphore mutex; /* Access mutex for use by i2c-keywest */ + low_i2c_func_t func; /* Access function */ + unsigned int is_open : 1; /* Poor man's access control */ + int mode; /* Current mode */ + int channel; /* Current channel */ + int num_channels; /* Number of channels */ + void __iomem *base; /* For keywest-i2c, base address */ + int bsteps; /* And register stepping */ + int speed; /* And speed */ +}; + +static struct low_i2c_host low_i2c_hosts[MAX_LOW_I2C_HOST]; + +/* No locking is necessary on allocation, we are running way before + * anything can race with us + */ +static struct low_i2c_host *find_low_i2c_host(struct device_node *np) +{ + int i; + + for (i = 0; i < MAX_LOW_I2C_HOST; i++) + if (low_i2c_hosts[i].np == np) + return &low_i2c_hosts[i]; + return NULL; +} + +/* + * + * i2c-keywest implementation (UniNorth, U2, U3, Keylargo's) + * + */ + +/* + * Keywest i2c definitions borrowed from drivers/i2c/i2c-keywest.h, + * should be moved somewhere in include/asm-ppc/ + */ +/* Register indices */ +typedef enum { + reg_mode = 0, + reg_control, + reg_status, + reg_isr, + reg_ier, + reg_addr, + reg_subaddr, + reg_data +} reg_t; + + +/* Mode register */ +#define KW_I2C_MODE_100KHZ 0x00 +#define KW_I2C_MODE_50KHZ 0x01 +#define KW_I2C_MODE_25KHZ 0x02 +#define KW_I2C_MODE_DUMB 0x00 +#define KW_I2C_MODE_STANDARD 0x04 +#define KW_I2C_MODE_STANDARDSUB 0x08 +#define KW_I2C_MODE_COMBINED 0x0C +#define KW_I2C_MODE_MODE_MASK 0x0C +#define KW_I2C_MODE_CHAN_MASK 0xF0 + +/* Control register */ +#define KW_I2C_CTL_AAK 0x01 +#define KW_I2C_CTL_XADDR 0x02 +#define KW_I2C_CTL_STOP 0x04 +#define KW_I2C_CTL_START 0x08 + +/* Status register */ +#define KW_I2C_STAT_BUSY 0x01 +#define KW_I2C_STAT_LAST_AAK 0x02 +#define KW_I2C_STAT_LAST_RW 0x04 +#define KW_I2C_STAT_SDA 0x08 +#define KW_I2C_STAT_SCL 0x10 + +/* IER & ISR registers */ +#define KW_I2C_IRQ_DATA 0x01 +#define KW_I2C_IRQ_ADDR 0x02 +#define KW_I2C_IRQ_STOP 0x04 +#define KW_I2C_IRQ_START 0x08 +#define KW_I2C_IRQ_MASK 0x0F + +/* State machine states */ +enum { + state_idle, + state_addr, + state_read, + state_write, + state_stop, + state_dead +}; + +#define WRONG_STATE(name) do {\ + printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \ + name, __kw_state_names[state], isr); \ + } while(0) + +static const char *__kw_state_names[] = { + "state_idle", + "state_addr", + "state_read", + "state_write", + "state_stop", + "state_dead" +}; + +static inline u8 __kw_read_reg(struct low_i2c_host *host, reg_t reg) +{ + return readb(host->base + (((unsigned int)reg) << host->bsteps)); +} + +static inline void __kw_write_reg(struct low_i2c_host *host, reg_t reg, u8 val) +{ + writeb(val, host->base + (((unsigned)reg) << host->bsteps)); + (void)__kw_read_reg(host, reg_subaddr); +} + +#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val) +#define kw_read_reg(reg) __kw_read_reg(host, reg) + + +/* Don't schedule, the g5 fan controller is too + * timing sensitive + */ +static u8 kw_wait_interrupt(struct low_i2c_host* host) +{ + int i, j; + u8 isr; + + for (i = 0; i < 100000; i++) { + isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK; + if (isr != 0) + return isr; + + /* This code is used with the timebase frozen, we cannot rely + * on udelay ! For now, just use a bogus loop + */ + for (j = 1; j < 10000; j++) + mb(); + } + return isr; +} + +static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int *rc, u8 **data, int *len, u8 isr) +{ + u8 ack; + + DBG("kw_handle_interrupt(%s, isr: %x)\n", __kw_state_names[state], isr); + + if (isr == 0) { + if (state != state_stop) { + DBG("KW: Timeout !\n"); + *rc = -EIO; + goto stop; + } + if (state == state_stop) { + ack = kw_read_reg(reg_status); + if (!(ack & KW_I2C_STAT_BUSY)) { + state = state_idle; + kw_write_reg(reg_ier, 0x00); + } + } + return state; + } + + if (isr & KW_I2C_IRQ_ADDR) { + ack = kw_read_reg(reg_status); + if (state != state_addr) { + kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); + WRONG_STATE("KW_I2C_IRQ_ADDR"); + *rc = -EIO; + goto stop; + } + if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { + *rc = -ENODEV; + DBG("KW: NAK on address\n"); + return state_stop; + } else { + if (rw) { + state = state_read; + if (*len > 1) + kw_write_reg(reg_control, KW_I2C_CTL_AAK); + } else { + state = state_write; + kw_write_reg(reg_data, **data); + (*data)++; (*len)--; + } + } + kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); + } + + if (isr & KW_I2C_IRQ_DATA) { + if (state == state_read) { + **data = kw_read_reg(reg_data); + (*data)++; (*len)--; + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + if ((*len) == 0) + state = state_stop; + else if ((*len) == 1) + kw_write_reg(reg_control, 0); + } else if (state == state_write) { + ack = kw_read_reg(reg_status); + if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { + DBG("KW: nack on data write\n"); + *rc = -EIO; + goto stop; + } else if (*len) { + kw_write_reg(reg_data, **data); + (*data)++; (*len)--; + } else { + kw_write_reg(reg_control, KW_I2C_CTL_STOP); + state = state_stop; + *rc = 0; + } + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + } else { + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + WRONG_STATE("KW_I2C_IRQ_DATA"); + if (state != state_stop) { + *rc = -EIO; + goto stop; + } + } + } + + if (isr & KW_I2C_IRQ_STOP) { + kw_write_reg(reg_isr, KW_I2C_IRQ_STOP); + if (state != state_stop) { + WRONG_STATE("KW_I2C_IRQ_STOP"); + *rc = -EIO; + } + return state_idle; + } + + if (isr & KW_I2C_IRQ_START) + kw_write_reg(reg_isr, KW_I2C_IRQ_START); + + return state; + + stop: + kw_write_reg(reg_control, KW_I2C_CTL_STOP); + return state_stop; +} + +static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, u8 *data, int len) +{ + u8 mode_reg = host->speed; + int state = state_addr; + int rc = 0; + + /* Setup mode & subaddress if any */ + switch(host->mode) { + case pmac_low_i2c_mode_dumb: + printk(KERN_ERR "low_i2c: Dumb mode not supported !\n"); + return -EINVAL; + case pmac_low_i2c_mode_std: + mode_reg |= KW_I2C_MODE_STANDARD; + break; + case pmac_low_i2c_mode_stdsub: + mode_reg |= KW_I2C_MODE_STANDARDSUB; + break; + case pmac_low_i2c_mode_combined: + mode_reg |= KW_I2C_MODE_COMBINED; + break; + } + + /* Setup channel & clear pending irqs */ + kw_write_reg(reg_isr, kw_read_reg(reg_isr)); + kw_write_reg(reg_mode, mode_reg | (host->channel << 4)); + kw_write_reg(reg_status, 0); + + /* Set up address and r/w bit */ + kw_write_reg(reg_addr, addr); + + /* Set up the sub address */ + if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB + || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED) + kw_write_reg(reg_subaddr, subaddr); + + /* Start sending address & disable interrupt*/ + kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/); + kw_write_reg(reg_control, KW_I2C_CTL_XADDR); + + /* State machine, to turn into an interrupt handler */ + while(state != state_idle) { + u8 isr = kw_wait_interrupt(host); + state = kw_handle_interrupt(host, state, addr & 1, &rc, &data, &len, isr); + } + + return rc; +} + +static void keywest_low_i2c_add(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(NULL); + u32 *psteps, *prate, steps, aoffset = 0; + struct device_node *parent; + + if (host == NULL) { + printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", + np->full_name); + return; + } + memset(host, 0, sizeof(*host)); + + init_MUTEX(&host->mutex); + host->np = of_node_get(np); + psteps = (u32 *)get_property(np, "AAPL,address-step", NULL); + steps = psteps ? (*psteps) : 0x10; + for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++) + steps >>= 1; + parent = of_get_parent(np); + host->num_channels = 1; + if (parent && parent->name[0] == 'u') { + host->num_channels = 2; + aoffset = 3; + } + /* Select interface rate */ + host->speed = KW_I2C_MODE_100KHZ; + prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL); + if (prate) switch(*prate) { + case 100: + host->speed = KW_I2C_MODE_100KHZ; + break; + case 50: + host->speed = KW_I2C_MODE_50KHZ; + break; + case 25: + host->speed = KW_I2C_MODE_25KHZ; + break; + } + + host->mode = pmac_low_i2c_mode_std; + host->base = ioremap(np->addrs[0].address + aoffset, + np->addrs[0].size); + host->func = keywest_low_i2c_func; +} + +/* + * + * PMU implementation + * + */ + + +#ifdef CONFIG_ADB_PMU + +static int pmu_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len) +{ + // TODO + return -ENODEV; +} + +static void pmu_low_i2c_add(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(NULL); + + if (host == NULL) { + printk(KERN_ERR "low_i2c: Can't allocate host for %s\n", + np->full_name); + return; + } + memset(host, 0, sizeof(*host)); + + init_MUTEX(&host->mutex); + host->np = of_node_get(np); + host->num_channels = 3; + host->mode = pmac_low_i2c_mode_std; + host->func = pmu_low_i2c_func; +} + +#endif /* CONFIG_ADB_PMU */ + +void __init pmac_init_low_i2c(void) +{ + struct device_node *np; + + /* Probe keywest-i2c busses */ + np = of_find_compatible_node(NULL, "i2c", "keywest-i2c"); + while(np) { + keywest_low_i2c_add(np); + np = of_find_compatible_node(np, "i2c", "keywest-i2c"); + } + +#ifdef CONFIG_ADB_PMU + /* Probe PMU busses */ + np = of_find_node_by_name(NULL, "via-pmu"); + if (np) + pmu_low_i2c_add(np); +#endif /* CONFIG_ADB_PMU */ + + /* TODO: Add CUDA support as well */ +} + +int pmac_low_i2c_lock(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + down(&host->mutex); + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_lock); + +int pmac_low_i2c_unlock(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + up(&host->mutex); + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_unlock); + + +int pmac_low_i2c_open(struct device_node *np, int channel) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + + if (channel >= host->num_channels) + return -EINVAL; + + down(&host->mutex); + host->is_open = 1; + host->channel = channel; + + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_open); + +int pmac_low_i2c_close(struct device_node *np) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + + host->is_open = 0; + up(&host->mutex); + + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_close); + +int pmac_low_i2c_setmode(struct device_node *np, int mode) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + WARN_ON(!host->is_open); + host->mode = mode; + + return 0; +} +EXPORT_SYMBOL(pmac_low_i2c_setmode); + +int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len) +{ + struct low_i2c_host *host = find_low_i2c_host(np); + + if (!host) + return -ENODEV; + WARN_ON(!host->is_open); + + return host->func(host, addrdir, subaddr, data, len); +} +EXPORT_SYMBOL(pmac_low_i2c_xfer); + diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c new file mode 100644 index 00000000000..4042e2f06ee --- /dev/null +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -0,0 +1,645 @@ +/* + * arch/ppc/platforms/pmac_nvram.c + * + * Copyright (C) 2002 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Todo: - add support for the OF persistent properties + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/string.h> +#include <linux/nvram.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/bootmem.h> +#include <linux/completion.h> +#include <linux/spinlock.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/nvram.h> + +#define DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define NVRAM_SIZE 0x2000 /* 8kB of non-volatile RAM */ + +#define CORE99_SIGNATURE 0x5a +#define CORE99_ADLER_START 0x14 + +/* On Core99, nvram is either a sharp, a micron or an AMD flash */ +#define SM_FLASH_STATUS_DONE 0x80 +#define SM_FLASH_STATUS_ERR 0x38 + +#define SM_FLASH_CMD_ERASE_CONFIRM 0xd0 +#define SM_FLASH_CMD_ERASE_SETUP 0x20 +#define SM_FLASH_CMD_RESET 0xff +#define SM_FLASH_CMD_WRITE_SETUP 0x40 +#define SM_FLASH_CMD_CLEAR_STATUS 0x50 +#define SM_FLASH_CMD_READ_STATUS 0x70 + +/* CHRP NVRAM header */ +struct chrp_header { + u8 signature; + u8 cksum; + u16 len; + char name[12]; + u8 data[0]; +}; + +struct core99_header { + struct chrp_header hdr; + u32 adler; + u32 generation; + u32 reserved[2]; +}; + +/* + * Read and write the non-volatile RAM on PowerMacs and CHRP machines. + */ +static int nvram_naddrs; +static volatile unsigned char *nvram_data; +static int is_core_99; +static int core99_bank = 0; +static int nvram_partitions[3]; +// XXX Turn that into a sem +static DEFINE_SPINLOCK(nv_lock); + +extern int pmac_newworld; +extern int system_running; + +static int (*core99_write_bank)(int bank, u8* datas); +static int (*core99_erase_bank)(int bank); + +static char *nvram_image; + + +static unsigned char core99_nvram_read_byte(int addr) +{ + if (nvram_image == NULL) + return 0xff; + return nvram_image[addr]; +} + +static void core99_nvram_write_byte(int addr, unsigned char val) +{ + if (nvram_image == NULL) + return; + nvram_image[addr] = val; +} + +static ssize_t core99_nvram_read(char *buf, size_t count, loff_t *index) +{ + int i; + + if (nvram_image == NULL) + return -ENODEV; + if (*index > NVRAM_SIZE) + return 0; + + i = *index; + if (i + count > NVRAM_SIZE) + count = NVRAM_SIZE - i; + + memcpy(buf, &nvram_image[i], count); + *index = i + count; + return count; +} + +static ssize_t core99_nvram_write(char *buf, size_t count, loff_t *index) +{ + int i; + + if (nvram_image == NULL) + return -ENODEV; + if (*index > NVRAM_SIZE) + return 0; + + i = *index; + if (i + count > NVRAM_SIZE) + count = NVRAM_SIZE - i; + + memcpy(&nvram_image[i], buf, count); + *index = i + count; + return count; +} + +static ssize_t core99_nvram_size(void) +{ + if (nvram_image == NULL) + return -ENODEV; + return NVRAM_SIZE; +} + +#ifdef CONFIG_PPC32 +static volatile unsigned char *nvram_addr; +static int nvram_mult; + +static unsigned char direct_nvram_read_byte(int addr) +{ + return in_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult]); +} + +static void direct_nvram_write_byte(int addr, unsigned char val) +{ + out_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult], val); +} + + +static unsigned char indirect_nvram_read_byte(int addr) +{ + unsigned char val; + unsigned long flags; + + spin_lock_irqsave(&nv_lock, flags); + out_8(nvram_addr, addr >> 5); + val = in_8(&nvram_data[(addr & 0x1f) << 4]); + spin_unlock_irqrestore(&nv_lock, flags); + + return val; +} + +static void indirect_nvram_write_byte(int addr, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&nv_lock, flags); + out_8(nvram_addr, addr >> 5); + out_8(&nvram_data[(addr & 0x1f) << 4], val); + spin_unlock_irqrestore(&nv_lock, flags); +} + + +#ifdef CONFIG_ADB_PMU + +static void pmu_nvram_complete(struct adb_request *req) +{ + if (req->arg) + complete((struct completion *)req->arg); +} + +static unsigned char pmu_nvram_read_byte(int addr) +{ + struct adb_request req; + DECLARE_COMPLETION(req_complete); + + req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; + if (pmu_request(&req, pmu_nvram_complete, 3, PMU_READ_NVRAM, + (addr >> 8) & 0xff, addr & 0xff)) + return 0xff; + if (system_state == SYSTEM_RUNNING) + wait_for_completion(&req_complete); + while (!req.complete) + pmu_poll(); + return req.reply[0]; +} + +static void pmu_nvram_write_byte(int addr, unsigned char val) +{ + struct adb_request req; + DECLARE_COMPLETION(req_complete); + + req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL; + if (pmu_request(&req, pmu_nvram_complete, 4, PMU_WRITE_NVRAM, + (addr >> 8) & 0xff, addr & 0xff, val)) + return; + if (system_state == SYSTEM_RUNNING) + wait_for_completion(&req_complete); + while (!req.complete) + pmu_poll(); +} + +#endif /* CONFIG_ADB_PMU */ +#endif /* CONFIG_PPC32 */ + +static u8 chrp_checksum(struct chrp_header* hdr) +{ + u8 *ptr; + u16 sum = hdr->signature; + for (ptr = (u8 *)&hdr->len; ptr < hdr->data; ptr++) + sum += *ptr; + while (sum > 0xFF) + sum = (sum & 0xFF) + (sum>>8); + return sum; +} + +static u32 core99_calc_adler(u8 *buffer) +{ + int cnt; + u32 low, high; + + buffer += CORE99_ADLER_START; + low = 1; + high = 0; + for (cnt=0; cnt<(NVRAM_SIZE-CORE99_ADLER_START); cnt++) { + if ((cnt % 5000) == 0) { + high %= 65521UL; + high %= 65521UL; + } + low += buffer[cnt]; + high += low; + } + low %= 65521UL; + high %= 65521UL; + + return (high << 16) | low; +} + +static u32 core99_check(u8* datas) +{ + struct core99_header* hdr99 = (struct core99_header*)datas; + + if (hdr99->hdr.signature != CORE99_SIGNATURE) { + DBG("Invalid signature\n"); + return 0; + } + if (hdr99->hdr.cksum != chrp_checksum(&hdr99->hdr)) { + DBG("Invalid checksum\n"); + return 0; + } + if (hdr99->adler != core99_calc_adler(datas)) { + DBG("Invalid adler\n"); + return 0; + } + return hdr99->generation; +} + +static int sm_erase_bank(int bank) +{ + int stat, i; + unsigned long timeout; + + u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank); + + out_8(base, SM_FLASH_CMD_ERASE_SETUP); + out_8(base, SM_FLASH_CMD_ERASE_CONFIRM); + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: Sharp/Micron flash erase timeout !\n"); + break; + } + out_8(base, SM_FLASH_CMD_READ_STATUS); + stat = in_8(base); + } while (!(stat & SM_FLASH_STATUS_DONE)); + + out_8(base, SM_FLASH_CMD_CLEAR_STATUS); + out_8(base, SM_FLASH_CMD_RESET); + + for (i=0; i<NVRAM_SIZE; i++) + if (base[i] != 0xff) { + printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n"); + return -ENXIO; + } + return 0; +} + +static int sm_write_bank(int bank, u8* datas) +{ + int i, stat = 0; + unsigned long timeout; + + u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: Sharp/Micron Writing bank %d...\n", bank); + + for (i=0; i<NVRAM_SIZE; i++) { + out_8(base+i, SM_FLASH_CMD_WRITE_SETUP); + udelay(1); + out_8(base+i, datas[i]); + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: Sharp/Micron flash write timeout !\n"); + break; + } + out_8(base, SM_FLASH_CMD_READ_STATUS); + stat = in_8(base); + } while (!(stat & SM_FLASH_STATUS_DONE)); + if (!(stat & SM_FLASH_STATUS_DONE)) + break; + } + out_8(base, SM_FLASH_CMD_CLEAR_STATUS); + out_8(base, SM_FLASH_CMD_RESET); + for (i=0; i<NVRAM_SIZE; i++) + if (base[i] != datas[i]) { + printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n"); + return -ENXIO; + } + return 0; +} + +static int amd_erase_bank(int bank) +{ + int i, stat = 0; + unsigned long timeout; + + u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: AMD Erasing bank %d...\n", bank); + + /* Unlock 1 */ + out_8(base+0x555, 0xaa); + udelay(1); + /* Unlock 2 */ + out_8(base+0x2aa, 0x55); + udelay(1); + + /* Sector-Erase */ + out_8(base+0x555, 0x80); + udelay(1); + out_8(base+0x555, 0xaa); + udelay(1); + out_8(base+0x2aa, 0x55); + udelay(1); + out_8(base, 0x30); + udelay(1); + + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: AMD flash erase timeout !\n"); + break; + } + stat = in_8(base) ^ in_8(base); + } while (stat != 0); + + /* Reset */ + out_8(base, 0xf0); + udelay(1); + + for (i=0; i<NVRAM_SIZE; i++) + if (base[i] != 0xff) { + printk(KERN_ERR "nvram: AMD flash erase failed !\n"); + return -ENXIO; + } + return 0; +} + +static int amd_write_bank(int bank, u8* datas) +{ + int i, stat = 0; + unsigned long timeout; + + u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE; + + DBG("nvram: AMD Writing bank %d...\n", bank); + + for (i=0; i<NVRAM_SIZE; i++) { + /* Unlock 1 */ + out_8(base+0x555, 0xaa); + udelay(1); + /* Unlock 2 */ + out_8(base+0x2aa, 0x55); + udelay(1); + + /* Write single word */ + out_8(base+0x555, 0xa0); + udelay(1); + out_8(base+i, datas[i]); + + timeout = 0; + do { + if (++timeout > 1000000) { + printk(KERN_ERR "nvram: AMD flash write timeout !\n"); + break; + } + stat = in_8(base) ^ in_8(base); + } while (stat != 0); + if (stat != 0) + break; + } + + /* Reset */ + out_8(base, 0xf0); + udelay(1); + + for (i=0; i<NVRAM_SIZE; i++) + if (base[i] != datas[i]) { + printk(KERN_ERR "nvram: AMD flash write failed !\n"); + return -ENXIO; + } + return 0; +} + +static void __init lookup_partitions(void) +{ + u8 buffer[17]; + int i, offset; + struct chrp_header* hdr; + + if (pmac_newworld) { + nvram_partitions[pmac_nvram_OF] = -1; + nvram_partitions[pmac_nvram_XPRAM] = -1; + nvram_partitions[pmac_nvram_NR] = -1; + hdr = (struct chrp_header *)buffer; + + offset = 0; + buffer[16] = 0; + do { + for (i=0;i<16;i++) + buffer[i] = ppc_md.nvram_read_val(offset+i); + if (!strcmp(hdr->name, "common")) + nvram_partitions[pmac_nvram_OF] = offset + 0x10; + if (!strcmp(hdr->name, "APL,MacOS75")) { + nvram_partitions[pmac_nvram_XPRAM] = offset + 0x10; + nvram_partitions[pmac_nvram_NR] = offset + 0x110; + } + offset += (hdr->len * 0x10); + } while(offset < NVRAM_SIZE); + } else { + nvram_partitions[pmac_nvram_OF] = 0x1800; + nvram_partitions[pmac_nvram_XPRAM] = 0x1300; + nvram_partitions[pmac_nvram_NR] = 0x1400; + } + DBG("nvram: OF partition at 0x%x\n", nvram_partitions[pmac_nvram_OF]); + DBG("nvram: XP partition at 0x%x\n", nvram_partitions[pmac_nvram_XPRAM]); + DBG("nvram: NR partition at 0x%x\n", nvram_partitions[pmac_nvram_NR]); +} + +static void core99_nvram_sync(void) +{ + struct core99_header* hdr99; + unsigned long flags; + + if (!is_core_99 || !nvram_data || !nvram_image) + return; + + spin_lock_irqsave(&nv_lock, flags); + if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE, + NVRAM_SIZE)) + goto bail; + + DBG("Updating nvram...\n"); + + hdr99 = (struct core99_header*)nvram_image; + hdr99->generation++; + hdr99->hdr.signature = CORE99_SIGNATURE; + hdr99->hdr.cksum = chrp_checksum(&hdr99->hdr); + hdr99->adler = core99_calc_adler(nvram_image); + core99_bank = core99_bank ? 0 : 1; + if (core99_erase_bank) + if (core99_erase_bank(core99_bank)) { + printk("nvram: Error erasing bank %d\n", core99_bank); + goto bail; + } + if (core99_write_bank) + if (core99_write_bank(core99_bank, nvram_image)) + printk("nvram: Error writing bank %d\n", core99_bank); + bail: + spin_unlock_irqrestore(&nv_lock, flags); + +#ifdef DEBUG + mdelay(2000); +#endif +} + +static int __init core99_nvram_setup(struct device_node *dp) +{ + int i; + u32 gen_bank0, gen_bank1; + + if (nvram_naddrs < 1) { + printk(KERN_ERR "nvram: no address\n"); + return -EINVAL; + } + nvram_image = alloc_bootmem(NVRAM_SIZE); + if (nvram_image == NULL) { + printk(KERN_ERR "nvram: can't allocate ram image\n"); + return -ENOMEM; + } + nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2); + nvram_naddrs = 1; /* Make sure we get the correct case */ + + DBG("nvram: Checking bank 0...\n"); + + gen_bank0 = core99_check((u8 *)nvram_data); + gen_bank1 = core99_check((u8 *)nvram_data + NVRAM_SIZE); + core99_bank = (gen_bank0 < gen_bank1) ? 1 : 0; + + DBG("nvram: gen0=%d, gen1=%d\n", gen_bank0, gen_bank1); + DBG("nvram: Active bank is: %d\n", core99_bank); + + for (i=0; i<NVRAM_SIZE; i++) + nvram_image[i] = nvram_data[i + core99_bank*NVRAM_SIZE]; + + ppc_md.nvram_read_val = core99_nvram_read_byte; + ppc_md.nvram_write_val = core99_nvram_write_byte; + ppc_md.nvram_read = core99_nvram_read; + ppc_md.nvram_write = core99_nvram_write; + ppc_md.nvram_size = core99_nvram_size; + ppc_md.nvram_sync = core99_nvram_sync; + /* + * Maybe we could be smarter here though making an exclusive list + * of known flash chips is a bit nasty as older OF didn't provide us + * with a useful "compatible" entry. A solution would be to really + * identify the chip using flash id commands and base ourselves on + * a list of known chips IDs + */ + if (device_is_compatible(dp, "amd-0137")) { + core99_erase_bank = amd_erase_bank; + core99_write_bank = amd_write_bank; + } else { + core99_erase_bank = sm_erase_bank; + core99_write_bank = sm_write_bank; + } + return 0; +} + +int __init pmac_nvram_init(void) +{ + struct device_node *dp; + int err = 0; + + nvram_naddrs = 0; + + dp = find_devices("nvram"); + if (dp == NULL) { + printk(KERN_ERR "Can't find NVRAM device\n"); + return -ENODEV; + } + nvram_naddrs = dp->n_addrs; + is_core_99 = device_is_compatible(dp, "nvram,flash"); + if (is_core_99) + err = core99_nvram_setup(dp); +#ifdef CONFIG_PPC32 + else if (_machine == _MACH_chrp && nvram_naddrs == 1) { + nvram_data = ioremap(dp->addrs[0].address + isa_mem_base, + dp->addrs[0].size); + nvram_mult = 1; + ppc_md.nvram_read_val = direct_nvram_read_byte; + ppc_md.nvram_write_val = direct_nvram_write_byte; + } else if (nvram_naddrs == 1) { + nvram_data = ioremap(dp->addrs[0].address, dp->addrs[0].size); + nvram_mult = (dp->addrs[0].size + NVRAM_SIZE - 1) / NVRAM_SIZE; + ppc_md.nvram_read_val = direct_nvram_read_byte; + ppc_md.nvram_write_val = direct_nvram_write_byte; + } else if (nvram_naddrs == 2) { + nvram_addr = ioremap(dp->addrs[0].address, dp->addrs[0].size); + nvram_data = ioremap(dp->addrs[1].address, dp->addrs[1].size); + ppc_md.nvram_read_val = indirect_nvram_read_byte; + ppc_md.nvram_write_val = indirect_nvram_write_byte; + } else if (nvram_naddrs == 0 && sys_ctrler == SYS_CTRLER_PMU) { +#ifdef CONFIG_ADB_PMU + nvram_naddrs = -1; + ppc_md.nvram_read_val = pmu_nvram_read_byte; + ppc_md.nvram_write_val = pmu_nvram_write_byte; +#endif /* CONFIG_ADB_PMU */ + } +#endif + else { + printk(KERN_ERR "Incompatible type of NVRAM\n"); + return -ENXIO; + } + lookup_partitions(); + return err; +} + +int pmac_get_partition(int partition) +{ + return nvram_partitions[partition]; +} + +u8 pmac_xpram_read(int xpaddr) +{ + int offset = pmac_get_partition(pmac_nvram_XPRAM); + + if (offset < 0 || xpaddr < 0 || xpaddr > 0x100) + return 0xff; + + return ppc_md.nvram_read_val(xpaddr + offset); +} + +void pmac_xpram_write(int xpaddr, u8 data) +{ + int offset = pmac_get_partition(pmac_nvram_XPRAM); + + if (offset < 0 || xpaddr < 0 || xpaddr > 0x100) + return; + + ppc_md.nvram_write_val(xpaddr + offset, data); +} + +EXPORT_SYMBOL(pmac_get_partition); +EXPORT_SYMBOL(pmac_xpram_read); +EXPORT_SYMBOL(pmac_xpram_write); diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c new file mode 100644 index 00000000000..8f818d092e2 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pci.c @@ -0,0 +1,1170 @@ +/* + * Support for PCI bridges found on Power Macintoshes. + * + * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org) + * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/grackle.h> +#ifdef CONFIG_PPC64 +#include <asm/iommu.h> +#include <asm/ppc-pci.h> +#endif + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static int add_bridge(struct device_node *dev); + +/* XXX Could be per-controller, but I don't think we risk anything by + * assuming we won't have both UniNorth and Bandit */ +static int has_uninorth; +#ifdef CONFIG_PPC64 +static struct pci_controller *u3_agp; +static struct pci_controller *u3_ht; +#endif /* CONFIG_PPC64 */ + +extern u8 pci_cache_line_size; +extern int pcibios_assign_bus_offset; + +struct device_node *k2_skiplist[2]; + +/* + * Magic constants for enabling cache coherency in the bandit/PSX bridge. + */ +#define BANDIT_DEVID_2 8 +#define BANDIT_REVID 3 + +#define BANDIT_DEVNUM 11 +#define BANDIT_MAGIC 0x50 +#define BANDIT_COHERENT 0x40 + +static int __init fixup_one_level_bus_range(struct device_node *node, int higher) +{ + for (; node != 0;node = node->sibling) { + int * bus_range; + unsigned int *class_code; + int len; + + /* For PCI<->PCI bridges or CardBus bridges, we go down */ + class_code = (unsigned int *) get_property(node, "class-code", NULL); + if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + bus_range = (int *) get_property(node, "bus-range", &len); + if (bus_range != NULL && len > 2 * sizeof(int)) { + if (bus_range[1] > higher) + higher = bus_range[1]; + } + higher = fixup_one_level_bus_range(node->child, higher); + } + return higher; +} + +/* This routine fixes the "bus-range" property of all bridges in the + * system since they tend to have their "last" member wrong on macs + * + * Note that the bus numbers manipulated here are OF bus numbers, they + * are not Linux bus numbers. + */ +static void __init fixup_bus_range(struct device_node *bridge) +{ + int * bus_range; + int len; + + /* Lookup the "bus-range" property for the hose */ + bus_range = (int *) get_property(bridge, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s\n", + bridge->full_name); + return; + } + bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); +} + +/* + * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers. + * + * The "Bandit" version is present in all early PCI PowerMacs, + * and up to the first ones using Grackle. Some machines may + * have 2 bandit controllers (2 PCI busses). + * + * "Chaos" is used in some "Bandit"-type machines as a bridge + * for the separate display bus. It is accessed the same + * way as bandit, but cannot be probed for devices. It therefore + * has its own config access functions. + * + * The "UniNorth" version is present in all Core99 machines + * (iBook, G4, new IMacs, and all the recent Apple machines). + * It contains 3 controllers in one ASIC. + * + * The U3 is the bridge used on G5 machines. It contains an + * AGP bus which is dealt with the old UniNorth access routines + * and a HyperTransport bus which uses its own set of access + * functions. + */ + +#define MACRISC_CFA0(devfn, off) \ + ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ + | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ + | (((unsigned long)(off)) & 0xFCUL)) + +#define MACRISC_CFA1(bus, devfn, off) \ + ((((unsigned long)(bus)) << 16) \ + |(((unsigned long)(devfn)) << 8) \ + |(((unsigned long)(off)) & 0xFCUL) \ + |1UL) + +static unsigned long macrisc_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, u8 offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) { + if (dev_fn < (11 << 3)) + return 0; + caddr = MACRISC_CFA0(dev_fn, offset); + } else + caddr = MACRISC_CFA1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= has_uninorth ? 0x07 : 0x03; + return ((unsigned long)hose->cfg_data) + offset; +} + +static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = macrisc_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = macrisc_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops macrisc_pci_ops = +{ + macrisc_read_config, + macrisc_write_config +}; + +#ifdef CONFIG_PPC32 +/* + * Verify that a specific (bus, dev_fn) exists on chaos + */ +static int +chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) +{ + struct device_node *np; + u32 *vendor, *device; + + np = pci_busdev_to_OF_node(bus, devfn); + if (np == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + vendor = (u32 *)get_property(np, "vendor-id", NULL); + device = (u32 *)get_property(np, "device-id", NULL); + if (vendor == NULL || device == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10) + && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + return PCIBIOS_SUCCESSFUL; +} + +static int +chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + int result = chaos_validate_dev(bus, devfn, offset); + if (result == PCIBIOS_BAD_REGISTER_NUMBER) + *val = ~0U; + if (result != PCIBIOS_SUCCESSFUL) + return result; + return macrisc_read_config(bus, devfn, offset, len, val); +} + +static int +chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + int result = chaos_validate_dev(bus, devfn, offset); + if (result != PCIBIOS_SUCCESSFUL) + return result; + return macrisc_write_config(bus, devfn, offset, len, val); +} + +static struct pci_ops chaos_pci_ops = +{ + chaos_read_config, + chaos_write_config +}; + +static void __init setup_chaos(struct pci_controller *hose, + struct reg_property *addr) +{ + /* assume a `chaos' bridge */ + hose->ops = &chaos_pci_ops; + hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); +} +#else +#define setup_chaos(hose, addr) +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC64 +/* + * These versions of U3 HyperTransport config space access ops do not + * implement self-view of the HT host yet + */ + +/* + * This function deals with some "special cases" devices. + * + * 0 -> No special case + * 1 -> Skip the device but act as if the access was successfull + * (return 0xff's on reads, eventually, cache config space + * accesses in a later version) + * -1 -> Hide the device (unsuccessful acess) + */ +static int u3_ht_skip_device(struct pci_controller *hose, + struct pci_bus *bus, unsigned int devfn) +{ + struct device_node *busdn, *dn; + int i; + + /* We only allow config cycles to devices that are in OF device-tree + * as we are apparently having some weird things going on with some + * revs of K2 on recent G5s + */ + if (bus->self) + busdn = pci_device_to_OF_node(bus->self); + else + busdn = hose->arch_data; + for (dn = busdn->child; dn; dn = dn->sibling) + if (dn->data && PCI_DN(dn)->devfn == devfn) + break; + if (dn == NULL) + return -1; + + /* + * When a device in K2 is powered down, we die on config + * cycle accesses. Fix that here. + */ + for (i=0; i<2; i++) + if (k2_skiplist[i] == dn) + return 1; + + return 0; +} + +#define U3_HT_CFA0(devfn, off) \ + ((((unsigned long)devfn) << 8) | offset) +#define U3_HT_CFA1(bus, devfn, off) \ + (U3_HT_CFA0(devfn, off) \ + + (((unsigned long)bus) << 16) \ + + 0x01000000UL) + +static unsigned long u3_ht_cfg_access(struct pci_controller* hose, + u8 bus, u8 devfn, u8 offset) +{ + if (bus == hose->first_busno) { + /* For now, we don't self probe U3 HT bridge */ + if (PCI_SLOT(devfn) == 0) + return 0; + return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); + } else + return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); +} + +static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (u3_ht_skip_device(hose, bus, devfn)) { + case 0: + break; + case 1: + switch (len) { + case 1: + *val = 0xff; break; + case 2: + *val = 0xffff; break; + default: + *val = 0xfffffffful; break; + } + return PCIBIOS_SUCCESSFUL; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (u3_ht_skip_device(hose, bus, devfn)) { + case 0: + break; + case 1: + return PCIBIOS_SUCCESSFUL; + default: + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_ht_pci_ops = +{ + u3_ht_read_config, + u3_ht_write_config +}; +#endif /* CONFIG_PPC64 */ + +#ifdef CONFIG_PPC32 +/* + * For a bandit bridge, turn on cache coherency if necessary. + * N.B. we could clean this up using the hose ops directly. + */ +static void __init init_bandit(struct pci_controller *bp) +{ + unsigned int vendev, magic; + int rev; + + /* read the word at offset 0 in config space for device 11 */ + out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID); + udelay(2); + vendev = in_le32(bp->cfg_data); + if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) + + PCI_VENDOR_ID_APPLE) { + /* read the revision id */ + out_le32(bp->cfg_addr, + (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID); + udelay(2); + rev = in_8(bp->cfg_data); + if (rev != BANDIT_REVID) + printk(KERN_WARNING + "Unknown revision %d for bandit\n", rev); + } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) { + printk(KERN_WARNING "bandit isn't? (%x)\n", vendev); + return; + } + + /* read the word at offset 0x50 */ + out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC); + udelay(2); + magic = in_le32(bp->cfg_data); + if ((magic & BANDIT_COHERENT) != 0) + return; + magic |= BANDIT_COHERENT; + udelay(2); + out_le32(bp->cfg_data, magic); + printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n"); +} + +/* + * Tweak the PCI-PCI bridge chip on the blue & white G3s. + */ +static void __init init_p2pbridge(void) +{ + struct device_node *p2pbridge; + struct pci_controller* hose; + u8 bus, devfn; + u16 val; + + /* XXX it would be better here to identify the specific + PCI-PCI bridge chip we have. */ + if ((p2pbridge = find_devices("pci-bridge")) == 0 + || p2pbridge->parent == NULL + || strcmp(p2pbridge->parent->name, "pci") != 0) + return; + if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) { + DBG("Can't find PCI infos for PCI<->PCI bridge\n"); + return; + } + /* Warning: At this point, we have not yet renumbered all busses. + * So we must use OF walking to find out hose + */ + hose = pci_find_hose_for_OF_device(p2pbridge); + if (!hose) { + DBG("Can't find hose for PCI<->PCI bridge\n"); + return; + } + if (early_read_config_word(hose, bus, devfn, + PCI_BRIDGE_CONTROL, &val) < 0) { + printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n"); + return; + } + val &= ~PCI_BRIDGE_CTL_MASTER_ABORT; + early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); +} + +/* + * Some Apple desktop machines have a NEC PD720100A USB2 controller + * on the motherboard. Open Firmware, on these, will disable the + * EHCI part of it so it behaves like a pair of OHCI's. This fixup + * code re-enables it ;) + */ +static void __init fixup_nec_usb2(void) +{ + struct device_node *nec; + + for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) { + struct pci_controller *hose; + u32 data, *prop; + u8 bus, devfn; + + prop = (u32 *)get_property(nec, "vendor-id", NULL); + if (prop == NULL) + continue; + if (0x1033 != *prop) + continue; + prop = (u32 *)get_property(nec, "device-id", NULL); + if (prop == NULL) + continue; + if (0x0035 != *prop) + continue; + prop = (u32 *)get_property(nec, "reg", NULL); + if (prop == NULL) + continue; + devfn = (prop[0] >> 8) & 0xff; + bus = (prop[0] >> 16) & 0xff; + if (PCI_FUNC(devfn) != 0) + continue; + hose = pci_find_hose_for_OF_device(nec); + if (!hose) + continue; + early_read_config_dword(hose, bus, devfn, 0xe4, &data); + if (data & 1UL) { + printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n"); + data &= ~1UL; + early_write_config_dword(hose, bus, devfn, 0xe4, data); + early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE, + nec->intrs[0].line); + } + } +} + +static void __init setup_bandit(struct pci_controller *hose, + struct reg_property *addr) +{ + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); + init_bandit(hose); +} + +static int __init setup_uninorth(struct pci_controller *hose, + struct reg_property *addr) +{ + pci_assign_all_buses = 1; + has_uninorth = 1; + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000); + hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000); + /* We "know" that the bridge at f2000000 has the PCI slots. */ + return addr->address == 0xf2000000; +} +#endif + +#ifdef CONFIG_PPC64 +static void __init setup_u3_agp(struct pci_controller* hose) +{ + /* On G5, we move AGP up to high bus number so we don't need + * to reassign bus numbers for HT. If we ever have P2P bridges + * on AGP, we'll have to move pci_assign_all_busses to the + * pci_controller structure so we enable it for AGP and not for + * HT childs. + * We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->first_busno = 0xf0; + hose->last_busno = 0xff; + has_uninorth = 1; + hose->ops = ¯isc_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + u3_agp = hose; +} + +static void __init setup_u3_ht(struct pci_controller* hose) +{ + struct device_node *np = (struct device_node *)hose->arch_data; + int i, cur; + + hose->ops = &u3_ht_pci_ops; + + /* We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + + /* + * /ht node doesn't expose a "ranges" property, so we "remove" regions that + * have been allocated to AGP. So far, this version of the code doesn't assign + * any of the 0xfxxxxxxx "fine" memory regions to /ht. + * We need to fix that sooner or later by either parsing all child "ranges" + * properties or figuring out the U3 address space decoding logic and + * then read its configuration register (if any). + */ + hose->io_base_phys = 0xf4000000; + hose->pci_io_size = 0x00400000; + hose->io_resource.name = np->full_name; + hose->io_resource.start = 0; + hose->io_resource.end = 0x003fffff; + hose->io_resource.flags = IORESOURCE_IO; + hose->pci_mem_offset = 0; + hose->first_busno = 0; + hose->last_busno = 0xef; + hose->mem_resources[0].name = np->full_name; + hose->mem_resources[0].start = 0x80000000; + hose->mem_resources[0].end = 0xefffffff; + hose->mem_resources[0].flags = IORESOURCE_MEM; + + u3_ht = hose; + + if (u3_agp == NULL) { + DBG("U3 has no AGP, using full resource range\n"); + return; + } + + /* We "remove" the AGP resources from the resources allocated to HT, that + * is we create "holes". However, that code does assumptions that so far + * happen to be true (cross fingers...), typically that resources in the + * AGP node are properly ordered + */ + cur = 0; + for (i=0; i<3; i++) { + struct resource *res = &u3_agp->mem_resources[i]; + if (res->flags != IORESOURCE_MEM) + continue; + /* We don't care about "fine" resources */ + if (res->start >= 0xf0000000) + continue; + /* Check if it's just a matter of "shrinking" us in one direction */ + if (hose->mem_resources[cur].start == res->start) { + DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", + cur, hose->mem_resources[cur].start, res->end + 1); + hose->mem_resources[cur].start = res->end + 1; + continue; + } + if (hose->mem_resources[cur].end == res->end) { + DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", + cur, hose->mem_resources[cur].end, res->start - 1); + hose->mem_resources[cur].end = res->start - 1; + continue; + } + /* No, it's not the case, we need a hole */ + if (cur == 2) { + /* not enough resources for a hole, we drop part of the range */ + printk(KERN_WARNING "Running out of resources for /ht host !\n"); + hose->mem_resources[cur].end = res->start - 1; + continue; + } + cur++; + DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n", + cur-1, res->start - 1, cur, res->end + 1); + hose->mem_resources[cur].name = np->full_name; + hose->mem_resources[cur].flags = IORESOURCE_MEM; + hose->mem_resources[cur].start = res->end + 1; + hose->mem_resources[cur].end = hose->mem_resources[cur-1].end; + hose->mem_resources[cur-1].end = res->start - 1; + } +} + +/* XXX this needs to be converged between ppc32 and ppc64... */ +static struct pci_controller * __init pcibios_alloc_controller(void) +{ + struct pci_controller *hose; + + hose = alloc_bootmem(sizeof(struct pci_controller)); + if (hose) + pci_setup_pci_controller(hose); + return hose; +} +#endif + +/* + * We assume that if we have a G3 powermac, we have one bridge called + * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise, + * if we have one or more bandit or chaos bridges, we don't have a MPC106. + */ +static int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; +#ifdef CONFIG_PPC32 + struct reg_property *addr; +#endif + char *disp_name; + int *bus_range; + int primary = 1; + + DBG("Adding PCI host bridge %s\n", dev->full_name); + +#ifdef CONFIG_PPC32 + /* XXX fix this */ + addr = (struct reg_property *) get_property(dev, "reg", &len); + if (addr == NULL || len < sizeof(*addr)) { + printk(KERN_WARNING "Can't use %s: no address\n", + dev->full_name); + return -ENODEV; + } +#endif + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", + dev->full_name); + } + + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + hose->arch_data = dev; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + disp_name = NULL; +#ifdef CONFIG_POWER4 + if (device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose); + disp_name = "U3-AGP"; + primary = 0; + } else if (device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose); + disp_name = "U3-HT"; + primary = 1; + } + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", + disp_name, hose->first_busno, hose->last_busno); +#else + if (device_is_compatible(dev, "uni-north")) { + primary = setup_uninorth(hose, addr); + disp_name = "UniNorth"; + } else if (strcmp(dev->name, "pci") == 0) { + /* XXX assume this is a mpc106 (grackle) */ + setup_grackle(hose); + disp_name = "Grackle (MPC106)"; + } else if (strcmp(dev->name, "bandit") == 0) { + setup_bandit(hose, addr); + disp_name = "Bandit"; + } else if (strcmp(dev->name, "chaos") == 0) { + setup_chaos(hose, addr); + disp_name = "Chaos"; + primary = 0; + } + printk(KERN_INFO "Found %s PCI host bridge at 0x%08lx. Firmware bus number: %d->%d\n", + disp_name, addr->address, hose->first_busno, hose->last_busno); +#endif + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); + + return 0; +} + +static void __init +pcibios_fixup_OF_interrupts(void) +{ + struct pci_dev* dev = NULL; + + /* + * Open Firmware often doesn't initialize the + * PCI_INTERRUPT_LINE config register properly, so we + * should find the device node and apply the interrupt + * obtained from the OF device-tree + */ + for_each_pci_dev(dev) { + struct device_node *node; + node = pci_device_to_OF_node(dev); + /* this is the node, see if it has interrupts */ + if (node && node->n_intrs > 0) + dev->irq = node->intrs[0].line; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } +} + +void __init +pmac_pcibios_fixup(void) +{ + /* Fixup interrupts according to OF tree */ + pcibios_fixup_OF_interrupts(); +} + +#ifdef CONFIG_PPC64 +static void __init pmac_fixup_phb_resources(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", + hose->global_number, + hose->io_resource.start, hose->io_resource.end); + } +} +#endif + +void __init pmac_pci_init(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "pmac_pci_init: can't find root " + "of device tree\n"); + return; + } + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { + if (np->name == NULL) + continue; + if (strcmp(np->name, "bandit") == 0 + || strcmp(np->name, "chaos") == 0 + || strcmp(np->name, "pci") == 0) { + if (add_bridge(np) == 0) + of_node_get(np); + } + if (strcmp(np->name, "ht") == 0) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + +#ifdef CONFIG_PPC64 + /* Probe HT last as it relies on the agp resources to be already + * setup + */ + if (ht && add_bridge(ht) != 0) + of_node_put(ht); + + /* + * We need to call pci_setup_phb_io for the HT bridge first + * so it gets the I/O port numbers starting at 0, and we + * need to call it for the AGP bridge after that so it gets + * small positive I/O port numbers. + */ + if (u3_ht) + pci_setup_phb_io(u3_ht, 1); + if (u3_agp) + pci_setup_phb_io(u3_agp, 0); + + /* + * On ppc64, fixup the IO resources on our host bridges as + * the common code does it only for children of the host bridges + */ + pmac_fixup_phb_resources(); + + /* Setup the linkage between OF nodes and PHBs */ + pci_devs_phb_init(); + + /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We + * assume there is no P2P bridge on the AGP bus, which should be a + * safe assumptions hopefully. + */ + if (u3_agp) { + struct device_node *np = u3_agp->arch_data; + PCI_DN(np)->busno = 0xf0; + for (np = np->child; np; np = np->sibling) + PCI_DN(np)->busno = 0xf0; + } + + /* map in PCI I/O space */ + phbs_remap_io(); + + /* pmac_check_ht_link(); */ + + /* Tell pci.c to not use the common resource allocation mechanism */ + pci_probe_only = 1; + + /* Allow all IO */ + io_page_mask = -1; + +#else /* CONFIG_PPC64 */ + init_p2pbridge(); + fixup_nec_usb2(); + + /* We are still having some issues with the Xserve G4, enabling + * some offset between bus number and domains for now when we + * assign all busses should help for now + */ + if (pci_assign_all_buses) + pcibios_assign_bus_offset = 0x10; +#endif +} + +int +pmac_pci_enable_device_hook(struct pci_dev *dev, int initial) +{ + struct device_node* node; + int updatecfg = 0; + int uninorth_child; + + node = pci_device_to_OF_node(dev); + + /* We don't want to enable USB controllers absent from the OF tree + * (iBook second controller) + */ + if (dev->vendor == PCI_VENDOR_ID_APPLE + && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) + && !node) { + printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", + pci_name(dev)); + return -EINVAL; + } + + if (!node) + return 0; + + uninorth_child = node->parent && + device_is_compatible(node->parent, "uni-north"); + + /* Firewire & GMAC were disabled after PCI probe, the driver is + * claiming them, we must re-enable them now. + */ + if (uninorth_child && !strcmp(node->name, "firewire") && + (device_is_compatible(node, "pci106b,18") || + device_is_compatible(node, "pci106b,30") || + device_is_compatible(node, "pci11c1,5811"))) { + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1); + pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1); + updatecfg = 1; + } + if (uninorth_child && !strcmp(node->name, "ethernet") && + device_is_compatible(node, "gmac")) { + pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1); + updatecfg = 1; + } + + if (updatecfg) { + u16 cmd; + + /* + * Make sure PCI is correctly configured + * + * We use old pci_bios versions of the function since, by + * default, gmac is not powered up, and so will be absent + * from the kernel initial PCI lookup. + * + * Should be replaced by 2.4 new PCI mechanisms and really + * register the device. + */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + | PCI_COMMAND_INVALIDATE; + pci_write_config_word(dev, PCI_COMMAND, cmd); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16); + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, + L1_CACHE_BYTES >> 2); + } + + return 0; +} + +/* We power down some devices after they have been probed. They'll + * be powered back on later on + */ +void __init pmac_pcibios_after_init(void) +{ + struct device_node* nd; + +#ifdef CONFIG_BLK_DEV_IDE + struct pci_dev *dev = NULL; + + /* OF fails to initialize IDE controllers on macs + * (and maybe other machines) + * + * Ideally, this should be moved to the IDE layer, but we need + * to check specifically with Andre Hedrick how to do it cleanly + * since the common IDE code seem to care about the fact that the + * BIOS may have disabled a controller. + * + * -- BenH + */ + for_each_pci_dev(dev) { + if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE) + pci_enable_device(dev); + } +#endif /* CONFIG_BLK_DEV_IDE */ + + nd = find_devices("firewire"); + while (nd) { + if (nd->parent && (device_is_compatible(nd, "pci106b,18") || + device_is_compatible(nd, "pci106b,30") || + device_is_compatible(nd, "pci11c1,5811")) + && device_is_compatible(nd->parent, "uni-north")) { + pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0); + pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0); + } + nd = nd->next; + } + nd = find_devices("ethernet"); + while (nd) { + if (nd->parent && device_is_compatible(nd, "gmac") + && device_is_compatible(nd->parent, "uni-north")) + pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0); + nd = nd->next; + } +} + +#ifdef CONFIG_PPC32 +void pmac_pci_fixup_cardbus(struct pci_dev* dev) +{ + if (_machine != _MACH_Pmac) + return; + /* + * Fix the interrupt routing on the various cardbus bridges + * used on powerbooks + */ + if (dev->vendor != PCI_VENDOR_ID_TI) + return; + if (dev->device == PCI_DEVICE_ID_TI_1130 || + dev->device == PCI_DEVICE_ID_TI_1131) { + u8 val; + /* Enable PCI interrupt */ + if (pci_read_config_byte(dev, 0x91, &val) == 0) + pci_write_config_byte(dev, 0x91, val | 0x30); + /* Disable ISA interrupt mode */ + if (pci_read_config_byte(dev, 0x92, &val) == 0) + pci_write_config_byte(dev, 0x92, val & ~0x06); + } + if (dev->device == PCI_DEVICE_ID_TI_1210 || + dev->device == PCI_DEVICE_ID_TI_1211 || + dev->device == PCI_DEVICE_ID_TI_1410 || + dev->device == PCI_DEVICE_ID_TI_1510) { + u8 val; + /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA + signal out the MFUNC0 pin */ + if (pci_read_config_byte(dev, 0x8c, &val) == 0) + pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2); + /* Disable ISA interrupt mode */ + if (pci_read_config_byte(dev, 0x92, &val) == 0) + pci_write_config_byte(dev, 0x92, val & ~0x06); + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus); + +void pmac_pci_fixup_pciata(struct pci_dev* dev) +{ + u8 progif = 0; + + /* + * On PowerMacs, we try to switch any PCI ATA controller to + * fully native mode + */ + if (_machine != _MACH_Pmac) + return; + /* Some controllers don't have the class IDE */ + if (dev->vendor == PCI_VENDOR_ID_PROMISE) + switch(dev->device) { + case PCI_DEVICE_ID_PROMISE_20246: + case PCI_DEVICE_ID_PROMISE_20262: + case PCI_DEVICE_ID_PROMISE_20263: + case PCI_DEVICE_ID_PROMISE_20265: + case PCI_DEVICE_ID_PROMISE_20267: + case PCI_DEVICE_ID_PROMISE_20268: + case PCI_DEVICE_ID_PROMISE_20269: + case PCI_DEVICE_ID_PROMISE_20270: + case PCI_DEVICE_ID_PROMISE_20271: + case PCI_DEVICE_ID_PROMISE_20275: + case PCI_DEVICE_ID_PROMISE_20276: + case PCI_DEVICE_ID_PROMISE_20277: + goto good; + } + /* Others, check PCI class */ + if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + good: + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if ((progif & 5) != 5) { + printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev)); + (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); + if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || + (progif & 5) != 5) + printk(KERN_ERR "Rewrite of PROGIF failed !\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata); +#endif + +/* + * Disable second function on K2-SATA, it's broken + * and disable IO BARs on first one + */ +static void fixup_k2_sata(struct pci_dev* dev) +{ + int i; + u16 cmd; + + if (PCI_FUNC(dev->devfn) > 0) { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); + pci_write_config_word(dev, PCI_COMMAND, cmd); + for (i = 0; i < 6; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + } + } else { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd &= ~PCI_COMMAND_IO; + pci_write_config_word(dev, PCI_COMMAND, cmd); + for (i = 0; i < 5; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata); + diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c new file mode 100644 index 00000000000..0037a8c8c81 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pic.c @@ -0,0 +1,678 @@ +/* + * Support for the interrupt controllers found on Power Macintosh, + * currently Apple's "Grand Central" interrupt controller in all + * it's incarnations. OpenPIC support used on newer machines is + * in a separate file + * + * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) + * + * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/module.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/time.h> +#include <asm/pmac_feature.h> +#include <asm/mpic.h> + +#include "pmac.h" + +/* + * XXX this should be in xmon.h, but putting it there means xmon.h + * has to include <linux/interrupt.h> (to get irqreturn_t), which + * causes all sorts of problems. -- paulus + */ +extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); + +#ifdef CONFIG_PPC32 +struct pmac_irq_hw { + unsigned int event; + unsigned int enable; + unsigned int ack; + unsigned int level; +}; + +/* Default addresses */ +static volatile struct pmac_irq_hw *pmac_irq_hw[4] = { + (struct pmac_irq_hw *) 0xf3000020, + (struct pmac_irq_hw *) 0xf3000010, + (struct pmac_irq_hw *) 0xf4000020, + (struct pmac_irq_hw *) 0xf4000010, +}; + +#define GC_LEVEL_MASK 0x3ff00000 +#define OHARE_LEVEL_MASK 0x1ff00000 +#define HEATHROW_LEVEL_MASK 0x1ff00000 + +static int max_irqs; +static int max_real_irqs; +static u32 level_mask[4]; + +static DEFINE_SPINLOCK(pmac_pic_lock); + +#define GATWICK_IRQ_POOL_SIZE 10 +static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; + +/* + * Mark an irq as "lost". This is only used on the pmac + * since it can lose interrupts (see pmac_set_irq_mask). + * -- Cort + */ +void +__set_lost(unsigned long irq_nr, int nokick) +{ + if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) { + atomic_inc(&ppc_n_lost_interrupts); + if (!nokick) + set_dec(1); + } +} + +static void +pmac_mask_and_ack_irq(unsigned int irq_nr) +{ + unsigned long bit = 1UL << (irq_nr & 0x1f); + int i = irq_nr >> 5; + unsigned long flags; + + if ((unsigned)irq_nr >= max_irqs) + return; + + clear_bit(irq_nr, ppc_cached_irq_mask); + if (test_and_clear_bit(irq_nr, ppc_lost_interrupts)) + atomic_dec(&ppc_n_lost_interrupts); + spin_lock_irqsave(&pmac_pic_lock, flags); + out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); + out_le32(&pmac_irq_hw[i]->ack, bit); + do { + /* make sure ack gets to controller before we enable + interrupts */ + mb(); + } while((in_le32(&pmac_irq_hw[i]->enable) & bit) + != (ppc_cached_irq_mask[i] & bit)); + spin_unlock_irqrestore(&pmac_pic_lock, flags); +} + +static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) +{ + unsigned long bit = 1UL << (irq_nr & 0x1f); + int i = irq_nr >> 5; + unsigned long flags; + + if ((unsigned)irq_nr >= max_irqs) + return; + + spin_lock_irqsave(&pmac_pic_lock, flags); + /* enable unmasked interrupts */ + out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); + + do { + /* make sure mask gets to controller before we + return to user */ + mb(); + } while((in_le32(&pmac_irq_hw[i]->enable) & bit) + != (ppc_cached_irq_mask[i] & bit)); + + /* + * Unfortunately, setting the bit in the enable register + * when the device interrupt is already on *doesn't* set + * the bit in the flag register or request another interrupt. + */ + if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level)) + __set_lost((ulong)irq_nr, nokicklost); + spin_unlock_irqrestore(&pmac_pic_lock, flags); +} + +/* When an irq gets requested for the first client, if it's an + * edge interrupt, we clear any previous one on the controller + */ +static unsigned int pmac_startup_irq(unsigned int irq_nr) +{ + unsigned long bit = 1UL << (irq_nr & 0x1f); + int i = irq_nr >> 5; + + if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0) + out_le32(&pmac_irq_hw[i]->ack, bit); + set_bit(irq_nr, ppc_cached_irq_mask); + pmac_set_irq_mask(irq_nr, 0); + + return 0; +} + +static void pmac_mask_irq(unsigned int irq_nr) +{ + clear_bit(irq_nr, ppc_cached_irq_mask); + pmac_set_irq_mask(irq_nr, 0); + mb(); +} + +static void pmac_unmask_irq(unsigned int irq_nr) +{ + set_bit(irq_nr, ppc_cached_irq_mask); + pmac_set_irq_mask(irq_nr, 0); +} + +static void pmac_end_irq(unsigned int irq_nr) +{ + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) + && irq_desc[irq_nr].action) { + set_bit(irq_nr, ppc_cached_irq_mask); + pmac_set_irq_mask(irq_nr, 1); + } +} + + +struct hw_interrupt_type pmac_pic = { + .typename = " PMAC-PIC ", + .startup = pmac_startup_irq, + .enable = pmac_unmask_irq, + .disable = pmac_mask_irq, + .ack = pmac_mask_and_ack_irq, + .end = pmac_end_irq, +}; + +struct hw_interrupt_type gatwick_pic = { + .typename = " GATWICK ", + .startup = pmac_startup_irq, + .enable = pmac_unmask_irq, + .disable = pmac_mask_irq, + .ack = pmac_mask_and_ack_irq, + .end = pmac_end_irq, +}; + +static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs) +{ + int irq, bits; + + for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { + int i = irq >> 5; + bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; + /* We must read level interrupts from the level register */ + bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); + bits &= ppc_cached_irq_mask[i]; + if (bits == 0) + continue; + irq += __ilog2(bits); + __do_IRQ(irq, regs); + return IRQ_HANDLED; + } + printk("gatwick irq not from gatwick pic\n"); + return IRQ_NONE; +} + +int +pmac_get_irq(struct pt_regs *regs) +{ + int irq; + unsigned long bits = 0; + +#ifdef CONFIG_SMP + void psurge_smp_message_recv(struct pt_regs *); + + /* IPI's are a hack on the powersurge -- Cort */ + if ( smp_processor_id() != 0 ) { + psurge_smp_message_recv(regs); + return -2; /* ignore, already handled */ + } +#endif /* CONFIG_SMP */ + for (irq = max_real_irqs; (irq -= 32) >= 0; ) { + int i = irq >> 5; + bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; + /* We must read level interrupts from the level register */ + bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); + bits &= ppc_cached_irq_mask[i]; + if (bits == 0) + continue; + irq += __ilog2(bits); + break; + } + + return irq; +} + +/* This routine will fix some missing interrupt values in the device tree + * on the gatwick mac-io controller used by some PowerBooks + */ +static void __init +pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) +{ + struct device_node *node; + int count; + + memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool)); + node = gw->child; + count = 0; + while(node) + { + /* Fix SCC */ + if (strcasecmp(node->name, "escc") == 0) + if (node->child) { + if (node->child->n_intrs < 3) { + node->child->intrs = &gatwick_int_pool[count]; + count += 3; + } + node->child->n_intrs = 3; + node->child->intrs[0].line = 15+irq_base; + node->child->intrs[1].line = 4+irq_base; + node->child->intrs[2].line = 5+irq_base; + printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n", + node->child->intrs[0].line, + node->child->intrs[1].line, + node->child->intrs[2].line); + } + /* Fix media-bay & left SWIM */ + if (strcasecmp(node->name, "media-bay") == 0) { + struct device_node* ya_node; + + if (node->n_intrs == 0) + node->intrs = &gatwick_int_pool[count++]; + node->n_intrs = 1; + node->intrs[0].line = 29+irq_base; + printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n", + node->intrs[0].line); + + ya_node = node->child; + while(ya_node) + { + if (strcasecmp(ya_node->name, "floppy") == 0) { + if (ya_node->n_intrs < 2) { + ya_node->intrs = &gatwick_int_pool[count]; + count += 2; + } + ya_node->n_intrs = 2; + ya_node->intrs[0].line = 19+irq_base; + ya_node->intrs[1].line = 1+irq_base; + printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n", + ya_node->intrs[0].line, ya_node->intrs[1].line); + } + if (strcasecmp(ya_node->name, "ata4") == 0) { + if (ya_node->n_intrs < 2) { + ya_node->intrs = &gatwick_int_pool[count]; + count += 2; + } + ya_node->n_intrs = 2; + ya_node->intrs[0].line = 14+irq_base; + ya_node->intrs[1].line = 3+irq_base; + printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n", + ya_node->intrs[0].line, ya_node->intrs[1].line); + } + ya_node = ya_node->sibling; + } + } + node = node->sibling; + } + if (count > 10) { + printk("WARNING !! Gatwick interrupt pool overflow\n"); + printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE); + printk(" requested = %d\n", count); + } +} + +/* + * The PowerBook 3400/2400/3500 can have a combo ethernet/modem + * card which includes an ohare chip that acts as a second interrupt + * controller. If we find this second ohare, set it up and fix the + * interrupt value in the device tree for the ethernet chip. + */ +static int __init enable_second_ohare(void) +{ + unsigned char bus, devfn; + unsigned short cmd; + unsigned long addr; + struct device_node *irqctrler = find_devices("pci106b,7"); + struct device_node *ether; + + if (irqctrler == NULL || irqctrler->n_addrs <= 0) + return -1; + addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40); + pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20); + max_irqs = 64; + if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) { + struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler); + if (!hose) + printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); + else { + early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd &= ~PCI_COMMAND_IO; + early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); + } + } + + /* Fix interrupt for the modem/ethernet combo controller. The number + in the device tree (27) is bogus (correct for the ethernet-only + board but not the combo ethernet/modem board). + The real interrupt is 28 on the second controller -> 28+32 = 60. + */ + ether = find_devices("pci1011,14"); + if (ether && ether->n_intrs > 0) { + ether->intrs[0].line = 60; + printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n", + ether->intrs[0].line); + } + + /* Return the interrupt number of the cascade */ + return irqctrler->intrs[0].line; +} + +#ifdef CONFIG_XMON +static struct irqaction xmon_action = { + .handler = xmon_irq, + .flags = 0, + .mask = CPU_MASK_NONE, + .name = "NMI - XMON" +}; +#endif + +static struct irqaction gatwick_cascade_action = { + .handler = gatwick_action, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +#endif /* CONFIG_PPC32 */ + +static int pmac_u3_cascade(struct pt_regs *regs, void *data) +{ + return mpic_get_one_irq((struct mpic *)data, regs); +} + +void __init pmac_pic_init(void) +{ + struct device_node *irqctrler = NULL; + struct device_node *irqctrler2 = NULL; + struct device_node *np; +#ifdef CONFIG_PPC32 + int i; + unsigned long addr; + int irq_cascade = -1; +#endif + struct mpic *mpic1, *mpic2; + + /* We first try to detect Apple's new Core99 chipset, since mac-io + * is quite different on those machines and contains an IBM MPIC2. + */ + np = find_type_devices("open-pic"); + while (np) { + if (np->parent && !strcmp(np->parent->name, "u3")) + irqctrler2 = np; + else + irqctrler = np; + np = np->next; + } + if (irqctrler != NULL && irqctrler->n_addrs > 0) { + unsigned char senses[128]; + + printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n", + (unsigned int)irqctrler->addrs[0].address); + pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0); + + prom_get_irq_senses(senses, 0, 128); + mpic1 = mpic_alloc(irqctrler->addrs[0].address, + MPIC_PRIMARY | MPIC_WANTS_RESET, + 0, 0, 128, 252, senses, 128, " OpenPIC "); + BUG_ON(mpic1 == NULL); + mpic_init(mpic1); + + if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 && + irqctrler2->n_addrs > 0) { + printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n", + (u32)irqctrler2->addrs[0].address, + irqctrler2->intrs[0].line); + + pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0); + prom_get_irq_senses(senses, 128, 128 + 124); + + /* We don't need to set MPIC_BROKEN_U3 here since we don't have + * hypertransport interrupts routed to it + */ + mpic2 = mpic_alloc(irqctrler2->addrs[0].address, + MPIC_BIG_ENDIAN | MPIC_WANTS_RESET, + 0, 128, 124, 0, senses, 124, + " U3-MPIC "); + BUG_ON(mpic2 == NULL); + mpic_init(mpic2); + mpic_setup_cascade(irqctrler2->intrs[0].line, + pmac_u3_cascade, mpic2); + } +#if defined(CONFIG_XMON) && defined(CONFIG_PPC32) + { + struct device_node* pswitch; + int nmi_irq; + + pswitch = find_devices("programmer-switch"); + if (pswitch && pswitch->n_intrs) { + nmi_irq = pswitch->intrs[0].line; + mpic_irq_set_priority(nmi_irq, 9); + setup_irq(nmi_irq, &xmon_action); + } + } +#endif /* CONFIG_XMON */ + return; + } + irqctrler = NULL; + +#ifdef CONFIG_PPC32 + /* Get the level/edge settings, assume if it's not + * a Grand Central nor an OHare, then it's an Heathrow + * (or Paddington). + */ + ppc_md.get_irq = pmac_get_irq; + if (find_devices("gc")) + level_mask[0] = GC_LEVEL_MASK; + else if (find_devices("ohare")) { + level_mask[0] = OHARE_LEVEL_MASK; + /* We might have a second cascaded ohare */ + level_mask[1] = OHARE_LEVEL_MASK; + } else { + level_mask[0] = HEATHROW_LEVEL_MASK; + level_mask[1] = 0; + /* We might have a second cascaded heathrow */ + level_mask[2] = HEATHROW_LEVEL_MASK; + level_mask[3] = 0; + } + + /* + * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts, + * 1998 G3 Series PowerBooks have 128, + * other powermacs have 32. + * The combo ethernet/modem card for the Powerstar powerbooks + * (2400/3400/3500, ohare based) has a second ohare chip + * effectively making a total of 64. + */ + max_irqs = max_real_irqs = 32; + irqctrler = find_devices("mac-io"); + if (irqctrler) + { + max_real_irqs = 64; + if (irqctrler->next) + max_irqs = 128; + else + max_irqs = 64; + } + for ( i = 0; i < max_real_irqs ; i++ ) + irq_desc[i].handler = &pmac_pic; + + /* get addresses of first controller */ + if (irqctrler) { + if (irqctrler->n_addrs > 0) { + addr = (unsigned long) + ioremap(irqctrler->addrs[0].address, 0x40); + for (i = 0; i < 2; ++i) + pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) + (addr + (2 - i) * 0x10); + } + + /* get addresses of second controller */ + irqctrler = irqctrler->next; + if (irqctrler && irqctrler->n_addrs > 0) { + addr = (unsigned long) + ioremap(irqctrler->addrs[0].address, 0x40); + for (i = 2; i < 4; ++i) + pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) + (addr + (4 - i) * 0x10); + irq_cascade = irqctrler->intrs[0].line; + if (device_is_compatible(irqctrler, "gatwick")) + pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs); + } + } else { + /* older powermacs have a GC (grand central) or ohare at + f3000000, with interrupt control registers at f3000020. */ + addr = (unsigned long) ioremap(0xf3000000, 0x40); + pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20); + } + + /* PowerBooks 3400 and 3500 can have a second controller in a second + ohare chip, on the combo ethernet/modem card */ + if (machine_is_compatible("AAPL,3400/2400") + || machine_is_compatible("AAPL,3500")) + irq_cascade = enable_second_ohare(); + + /* disable all interrupts in all controllers */ + for (i = 0; i * 32 < max_irqs; ++i) + out_le32(&pmac_irq_hw[i]->enable, 0); + /* mark level interrupts */ + for (i = 0; i < max_irqs; i++) + if (level_mask[i >> 5] & (1UL << (i & 0x1f))) + irq_desc[i].status = IRQ_LEVEL; + + /* get interrupt line of secondary interrupt controller */ + if (irq_cascade >= 0) { + printk(KERN_INFO "irq: secondary controller on irq %d\n", + (int)irq_cascade); + for ( i = max_real_irqs ; i < max_irqs ; i++ ) + irq_desc[i].handler = &gatwick_pic; + setup_irq(irq_cascade, &gatwick_cascade_action); + } + printk("System has %d possible interrupts\n", max_irqs); + if (max_irqs != max_real_irqs) + printk(KERN_DEBUG "%d interrupts on main controller\n", + max_real_irqs); + +#ifdef CONFIG_XMON + setup_irq(20, &xmon_action); +#endif /* CONFIG_XMON */ +#endif /* CONFIG_PPC32 */ +} + +#ifdef CONFIG_PM +/* + * These procedures are used in implementing sleep on the powerbooks. + * sleep_save_intrs() saves the states of all interrupt enables + * and disables all interrupts except for the nominated one. + * sleep_restore_intrs() restores the states of all interrupt enables. + */ +unsigned long sleep_save_mask[2]; + +/* This used to be passed by the PMU driver but that link got + * broken with the new driver model. We use this tweak for now... + */ +static int pmacpic_find_viaint(void) +{ + int viaint = -1; + +#ifdef CONFIG_ADB_PMU + struct device_node *np; + + if (pmu_get_model() != PMU_OHARE_BASED) + goto not_found; + np = of_find_node_by_name(NULL, "via-pmu"); + if (np == NULL) + goto not_found; + viaint = np->intrs[0].line; +#endif /* CONFIG_ADB_PMU */ + +not_found: + return viaint; +} + +static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) +{ + int viaint = pmacpic_find_viaint(); + + sleep_save_mask[0] = ppc_cached_irq_mask[0]; + sleep_save_mask[1] = ppc_cached_irq_mask[1]; + ppc_cached_irq_mask[0] = 0; + ppc_cached_irq_mask[1] = 0; + if (viaint > 0) + set_bit(viaint, ppc_cached_irq_mask); + out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]); + if (max_real_irqs > 32) + out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]); + (void)in_le32(&pmac_irq_hw[0]->event); + /* make sure mask gets to controller before we return to caller */ + mb(); + (void)in_le32(&pmac_irq_hw[0]->enable); + + return 0; +} + +static int pmacpic_resume(struct sys_device *sysdev) +{ + int i; + + out_le32(&pmac_irq_hw[0]->enable, 0); + if (max_real_irqs > 32) + out_le32(&pmac_irq_hw[1]->enable, 0); + mb(); + for (i = 0; i < max_real_irqs; ++i) + if (test_bit(i, sleep_save_mask)) + pmac_unmask_irq(i); + + return 0; +} + +#endif /* CONFIG_PM */ + +static struct sysdev_class pmacpic_sysclass = { + set_kset_name("pmac_pic"), +}; + +static struct sys_device device_pmacpic = { + .id = 0, + .cls = &pmacpic_sysclass, +}; + +static struct sysdev_driver driver_pmacpic = { +#ifdef CONFIG_PM + .suspend = &pmacpic_suspend, + .resume = &pmacpic_resume, +#endif /* CONFIG_PM */ +}; + +static int __init init_pmacpic_sysfs(void) +{ +#ifdef CONFIG_PPC32 + if (max_irqs == 0) + return -ENODEV; +#endif + printk(KERN_DEBUG "Registering pmac pic with sysfs...\n"); + sysdev_class_register(&pmacpic_sysclass); + sysdev_register(&device_pmacpic); + sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic); + return 0; +} + +subsys_initcall(init_pmacpic_sysfs); + diff --git a/arch/powerpc/platforms/powermac/pic.h b/arch/powerpc/platforms/powermac/pic.h new file mode 100644 index 00000000000..664103dfeef --- /dev/null +++ b/arch/powerpc/platforms/powermac/pic.h @@ -0,0 +1,11 @@ +#ifndef __PPC_PLATFORMS_PMAC_PIC_H +#define __PPC_PLATFORMS_PMAC_PIC_H + +#include <linux/irq.h> + +extern struct hw_interrupt_type pmac_pic; + +void pmac_pic_init(void); +int pmac_get_irq(struct pt_regs *regs); + +#endif /* __PPC_PLATFORMS_PMAC_PIC_H */ diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h new file mode 100644 index 00000000000..2ad25e13423 --- /dev/null +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -0,0 +1,51 @@ +#ifndef __PMAC_H__ +#define __PMAC_H__ + +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/irq.h> + +/* + * Declaration for the various functions exported by the + * pmac_* files. Mostly for use by pmac_setup + */ + +struct rtc_time; + +extern long pmac_time_init(void); +extern unsigned long pmac_get_boot_time(void); +extern void pmac_get_rtc_time(struct rtc_time *); +extern int pmac_set_rtc_time(struct rtc_time *); +extern void pmac_read_rtc_time(void); +extern void pmac_calibrate_decr(void); +extern void pmac_pcibios_fixup(void); +extern void pmac_pci_init(void); +extern unsigned long pmac_ide_get_base(int index); +extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, + unsigned long data_port, unsigned long ctrl_port, int *irq); + +extern void pmac_nvram_update(void); +extern unsigned char pmac_nvram_read_byte(int addr); +extern void pmac_nvram_write_byte(int addr, unsigned char val); +extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial); +extern void pmac_pcibios_after_init(void); +extern int of_show_percpuinfo(struct seq_file *m, int i); + +extern void pmac_pci_init(void); +extern void pmac_setup_pci_dma(void); +extern void pmac_check_ht_link(void); + +extern void pmac_setup_smp(void); + +extern unsigned long pmac_ide_get_base(int index); +extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, + unsigned long data_port, unsigned long ctrl_port, int *irq); + +extern int pmac_nvram_init(void); + +extern struct hw_interrupt_type pmac_pic; + +void pmac_pic_init(void); +int pmac_get_irq(struct pt_regs *regs); + +#endif /* __PMAC_H__ */ diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c new file mode 100644 index 00000000000..6f62af59729 --- /dev/null +++ b/arch/powerpc/platforms/powermac/setup.c @@ -0,0 +1,794 @@ +/* + * Powermac setup and early boot code plus other random bits. + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Adapted for Power Macintosh by Paul Mackerras + * Copyright (C) 1996 Paul Mackerras (paulus@samba.org) + * + * Derived from "arch/alpha/kernel/setup.c" + * Copyright (C) 1995 Linus Torvalds + * + * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +/* + * bootup setup stuff.. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/tty.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/major.h> +#include <linux/initrd.h> +#include <linux/vt_kern.h> +#include <linux/console.h> +#include <linux/ide.h> +#include <linux/pci.h> +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/bitops.h> +#include <linux/suspend.h> + +#include <asm/reg.h> +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/ohare.h> +#include <asm/mediabay.h> +#include <asm/machdep.h> +#include <asm/dma.h> +#include <asm/cputable.h> +#include <asm/btext.h> +#include <asm/pmac_feature.h> +#include <asm/time.h> +#include <asm/of_device.h> +#include <asm/mmu_context.h> +#include <asm/iommu.h> +#include <asm/smu.h> +#include <asm/pmc.h> +#include <asm/mpic.h> + +#include "pmac.h" + +#undef SHOW_GATWICK_IRQS + +unsigned char drive_info; + +int ppc_override_l2cr = 0; +int ppc_override_l2cr_value; +int has_l2cache = 0; + +int pmac_newworld = 1; + +static int current_root_goodness = -1; + +extern int pmac_newworld; +extern struct machdep_calls pmac_md; + +#define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */ + +#ifdef CONFIG_PPC64 +#include <asm/udbg.h> +int sccdbg; +#endif + +extern void zs_kgdb_hook(int tty_num); + +sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN; +EXPORT_SYMBOL(sys_ctrler); + +#ifdef CONFIG_PMAC_SMU +unsigned long smu_cmdbuf_abs; +EXPORT_SYMBOL(smu_cmdbuf_abs); +#endif + +#ifdef CONFIG_SMP +extern struct smp_ops_t psurge_smp_ops; +extern struct smp_ops_t core99_smp_ops; +#endif /* CONFIG_SMP */ + +static void pmac_show_cpuinfo(struct seq_file *m) +{ + struct device_node *np; + char *pp; + int plen; + int mbmodel; + unsigned int mbflags; + char* mbname; + + mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, + PMAC_MB_INFO_MODEL, 0); + mbflags = pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, + PMAC_MB_INFO_FLAGS, 0); + if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME, + (long) &mbname) != 0) + mbname = "Unknown"; + + /* find motherboard type */ + seq_printf(m, "machine\t\t: "); + np = of_find_node_by_path("/"); + if (np != NULL) { + pp = (char *) get_property(np, "model", NULL); + if (pp != NULL) + seq_printf(m, "%s\n", pp); + else + seq_printf(m, "PowerMac\n"); + pp = (char *) get_property(np, "compatible", &plen); + if (pp != NULL) { + seq_printf(m, "motherboard\t:"); + while (plen > 0) { + int l = strlen(pp) + 1; + seq_printf(m, " %s", pp); + plen -= l; + pp += l; + } + seq_printf(m, "\n"); + } + of_node_put(np); + } else + seq_printf(m, "PowerMac\n"); + + /* print parsed model */ + seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname); + seq_printf(m, "pmac flags\t: %08x\n", mbflags); + + /* find l2 cache info */ + np = of_find_node_by_name(NULL, "l2-cache"); + if (np == NULL) + np = of_find_node_by_type(NULL, "cache"); + if (np != NULL) { + unsigned int *ic = (unsigned int *) + get_property(np, "i-cache-size", NULL); + unsigned int *dc = (unsigned int *) + get_property(np, "d-cache-size", NULL); + seq_printf(m, "L2 cache\t:"); + has_l2cache = 1; + if (get_property(np, "cache-unified", NULL) != 0 && dc) { + seq_printf(m, " %dK unified", *dc / 1024); + } else { + if (ic) + seq_printf(m, " %dK instruction", *ic / 1024); + if (dc) + seq_printf(m, "%s %dK data", + (ic? " +": ""), *dc / 1024); + } + pp = get_property(np, "ram-type", NULL); + if (pp) + seq_printf(m, " %s", pp); + seq_printf(m, "\n"); + of_node_put(np); + } + + /* Indicate newworld/oldworld */ + seq_printf(m, "pmac-generation\t: %s\n", + pmac_newworld ? "NewWorld" : "OldWorld"); +} + +static void pmac_show_percpuinfo(struct seq_file *m, int i) +{ +#ifdef CONFIG_CPU_FREQ_PMAC + extern unsigned int pmac_get_one_cpufreq(int i); + unsigned int freq = pmac_get_one_cpufreq(i); + if (freq != 0) { + seq_printf(m, "clock\t\t: %dMHz\n", freq/1000); + return; + } +#endif /* CONFIG_CPU_FREQ_PMAC */ +} + +#ifndef CONFIG_ADB_CUDA +int find_via_cuda(void) +{ + if (!find_devices("via-cuda")) + return 0; + printk("WARNING ! Your machine is CUDA-based but your kernel\n"); + printk(" wasn't compiled with CONFIG_ADB_CUDA option !\n"); + return 0; +} +#endif + +#ifndef CONFIG_ADB_PMU +int find_via_pmu(void) +{ + if (!find_devices("via-pmu")) + return 0; + printk("WARNING ! Your machine is PMU-based but your kernel\n"); + printk(" wasn't compiled with CONFIG_ADB_PMU option !\n"); + return 0; +} +#endif + +#ifndef CONFIG_PMAC_SMU +int smu_init(void) +{ + /* should check and warn if SMU is present */ + return 0; +} +#endif + +#ifdef CONFIG_PPC32 +static volatile u32 *sysctrl_regs; + +static void __init ohare_init(void) +{ + /* this area has the CPU identification register + and some registers used by smp boards */ + sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000); + + /* + * Turn on the L2 cache. + * We assume that we have a PSX memory controller iff + * we have an ohare I/O controller. + */ + if (find_devices("ohare") != NULL) { + if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) { + if (sysctrl_regs[4] & 0x10) + sysctrl_regs[4] |= 0x04000020; + else + sysctrl_regs[4] |= 0x04000000; + if(has_l2cache) + printk(KERN_INFO "Level 2 cache enabled\n"); + } + } +} + +static void __init l2cr_init(void) +{ + /* Checks "l2cr-value" property in the registry */ + if (cpu_has_feature(CPU_FTR_L2CR)) { + struct device_node *np = find_devices("cpus"); + if (np == 0) + np = find_type_devices("cpu"); + if (np != 0) { + unsigned int *l2cr = (unsigned int *) + get_property(np, "l2cr-value", NULL); + if (l2cr != 0) { + ppc_override_l2cr = 1; + ppc_override_l2cr_value = *l2cr; + _set_L2CR(0); + _set_L2CR(ppc_override_l2cr_value); + } + } + } + + if (ppc_override_l2cr) + printk(KERN_INFO "L2CR overridden (0x%x), " + "backside cache is %s\n", + ppc_override_l2cr_value, + (ppc_override_l2cr_value & 0x80000000) + ? "enabled" : "disabled"); +} +#endif + +void __init pmac_setup_arch(void) +{ + struct device_node *cpu, *ic; + int *fp; + unsigned long pvr; + + pvr = PVR_VER(mfspr(SPRN_PVR)); + + /* Set loops_per_jiffy to a half-way reasonable value, + for use until calibrate_delay gets called. */ + loops_per_jiffy = 50000000 / HZ; + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != NULL) { + fp = (int *) get_property(cpu, "clock-frequency", NULL); + if (fp != NULL) { + if (pvr >= 0x30 && pvr < 0x80) + /* PPC970 etc. */ + loops_per_jiffy = *fp / (3 * HZ); + else if (pvr == 4 || pvr >= 8) + /* 604, G3, G4 etc. */ + loops_per_jiffy = *fp / HZ; + else + /* 601, 603, etc. */ + loops_per_jiffy = *fp / (2 * HZ); + } + of_node_put(cpu); + } + + /* See if newworld or oldworld */ + for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; ) + if (get_property(ic, "interrupt-controller", NULL)) + break; + pmac_newworld = (ic != NULL); + if (ic) + of_node_put(ic); + + /* Lookup PCI hosts */ + pmac_pci_init(); + +#ifdef CONFIG_PPC32 + ohare_init(); + l2cr_init(); +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC64 + /* Probe motherboard chipset */ + /* this is done earlier in setup_arch for 32-bit */ + pmac_feature_init(); + + /* We can NAP */ + powersave_nap = 1; + printk(KERN_INFO "Using native/NAP idle loop\n"); +#endif + +#ifdef CONFIG_KGDB + zs_kgdb_hook(0); +#endif + + find_via_cuda(); + find_via_pmu(); + smu_init(); + +#ifdef CONFIG_NVRAM + pmac_nvram_init(); +#endif + +#ifdef CONFIG_PPC32 +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = DEFAULT_ROOT_DEVICE; +#endif + +#ifdef CONFIG_SMP + /* Check for Core99 */ + if (find_devices("uni-n") || find_devices("u3")) + smp_ops = &core99_smp_ops; +#ifdef CONFIG_PPC32 + else + smp_ops = &psurge_smp_ops; +#endif +#endif /* CONFIG_SMP */ +} + +char *bootpath; +char *bootdevice; +void *boot_host; +int boot_target; +int boot_part; +extern dev_t boot_dev; + +#ifdef CONFIG_SCSI +void __init note_scsi_host(struct device_node *node, void *host) +{ + int l; + char *p; + + l = strlen(node->full_name); + if (bootpath != NULL && bootdevice != NULL + && strncmp(node->full_name, bootdevice, l) == 0 + && (bootdevice[l] == '/' || bootdevice[l] == 0)) { + boot_host = host; + /* + * There's a bug in OF 1.0.5. (Why am I not surprised.) + * If you pass a path like scsi/sd@1:0 to canon, it returns + * something like /bandit@F2000000/gc@10/53c94@10000/sd@0,0 + * That is, the scsi target number doesn't get preserved. + * So we pick the target number out of bootpath and use that. + */ + p = strstr(bootpath, "/sd@"); + if (p != NULL) { + p += 4; + boot_target = simple_strtoul(p, NULL, 10); + p = strchr(p, ':'); + if (p != NULL) + boot_part = simple_strtoul(p + 1, NULL, 10); + } + } +} +EXPORT_SYMBOL(note_scsi_host); +#endif + +#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC) +static dev_t __init find_ide_boot(void) +{ + char *p; + int n; + dev_t __init pmac_find_ide_boot(char *bootdevice, int n); + + if (bootdevice == NULL) + return 0; + p = strrchr(bootdevice, '/'); + if (p == NULL) + return 0; + n = p - bootdevice; + + return pmac_find_ide_boot(bootdevice, n); +} +#endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */ + +static void __init find_boot_device(void) +{ +#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC) + boot_dev = find_ide_boot(); +#endif +} + +/* TODO: Merge the suspend-to-ram with the common code !!! + * currently, this is a stub implementation for suspend-to-disk + * only + */ + +#ifdef CONFIG_SOFTWARE_SUSPEND + +static int pmac_pm_prepare(suspend_state_t state) +{ + printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state); + + return 0; +} + +static int pmac_pm_enter(suspend_state_t state) +{ + printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state); + + /* Giveup the lazy FPU & vec so we don't have to back them + * up from the low level code + */ + enable_kernel_fp(); + +#ifdef CONFIG_ALTIVEC + if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC) + enable_kernel_altivec(); +#endif /* CONFIG_ALTIVEC */ + + return 0; +} + +static int pmac_pm_finish(suspend_state_t state) +{ + printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state); + + /* Restore userland MMU context */ + set_context(current->active_mm->context, current->active_mm->pgd); + + return 0; +} + +static struct pm_ops pmac_pm_ops = { + .pm_disk_mode = PM_DISK_SHUTDOWN, + .prepare = pmac_pm_prepare, + .enter = pmac_pm_enter, + .finish = pmac_pm_finish, +}; + +#endif /* CONFIG_SOFTWARE_SUSPEND */ + +static int initializing = 1; + +static int pmac_late_init(void) +{ + initializing = 0; +#ifdef CONFIG_SOFTWARE_SUSPEND + pm_set_ops(&pmac_pm_ops); +#endif /* CONFIG_SOFTWARE_SUSPEND */ + return 0; +} + +late_initcall(pmac_late_init); + +/* can't be __init - can be called whenever a disk is first accessed */ +void note_bootable_part(dev_t dev, int part, int goodness) +{ + static int found_boot = 0; + char *p; + + if (!initializing) + return; + if ((goodness <= current_root_goodness) && + ROOT_DEV != DEFAULT_ROOT_DEVICE) + return; + p = strstr(saved_command_line, "root="); + if (p != NULL && (p == saved_command_line || p[-1] == ' ')) + return; + + if (!found_boot) { + find_boot_device(); + found_boot = 1; + } + if (!boot_dev || dev == boot_dev) { + ROOT_DEV = dev + part; + boot_dev = 0; + current_root_goodness = goodness; + } +} + +#ifdef CONFIG_ADB_CUDA +static void cuda_restart(void) +{ + struct adb_request req; + + cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_RESET_SYSTEM); + for (;;) + cuda_poll(); +} + +static void cuda_shutdown(void) +{ + struct adb_request req; + + cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_POWERDOWN); + for (;;) + cuda_poll(); +} + +#else +#define cuda_restart() +#define cuda_shutdown() +#endif + +#ifndef CONFIG_ADB_PMU +#define pmu_restart() +#define pmu_shutdown() +#endif + +#ifndef CONFIG_PMAC_SMU +#define smu_restart() +#define smu_shutdown() +#endif + +static void pmac_restart(char *cmd) +{ + switch (sys_ctrler) { + case SYS_CTRLER_CUDA: + cuda_restart(); + break; + case SYS_CTRLER_PMU: + pmu_restart(); + break; + case SYS_CTRLER_SMU: + smu_restart(); + break; + default: ; + } +} + +static void pmac_power_off(void) +{ + switch (sys_ctrler) { + case SYS_CTRLER_CUDA: + cuda_shutdown(); + break; + case SYS_CTRLER_PMU: + pmu_shutdown(); + break; + case SYS_CTRLER_SMU: + smu_shutdown(); + break; + default: ; + } +} + +static void +pmac_halt(void) +{ + pmac_power_off(); +} + +#ifdef CONFIG_PPC32 +void __init pmac_init(void) +{ + /* isa_io_base gets set in pmac_pci_init */ + isa_mem_base = PMAC_ISA_MEM_BASE; + pci_dram_offset = PMAC_PCI_DRAM_OFFSET; + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 1; + DMA_MODE_WRITE = 2; + + ppc_md = pmac_md; + +#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) +#ifdef CONFIG_BLK_DEV_IDE_PMAC + ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; + ppc_ide_md.default_io_base = pmac_ide_get_base; +#endif /* CONFIG_BLK_DEV_IDE_PMAC */ +#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ + + if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0); + +} +#endif + +/* + * Early initialization. + */ +static void __init pmac_init_early(void) +{ +#ifdef CONFIG_PPC64 + /* Initialize hash table, from now on, we can take hash faults + * and call ioremap + */ + hpte_init_native(); + + /* Init SCC */ + if (strstr(cmd_line, "sccdbg")) { + sccdbg = 1; + udbg_init_scc(NULL); + } + + /* Setup interrupt mapping options */ + ppc64_interrupt_controller = IC_OPEN_PIC; + + iommu_init_early_u3(); +#endif +} + +static void __init pmac_progress(char *s, unsigned short hex) +{ +#ifdef CONFIG_PPC64 + if (sccdbg) { + udbg_puts(s); + udbg_puts("\n"); + return; + } +#endif +#ifdef CONFIG_BOOTX_TEXT + if (boot_text_mapped) { + btext_drawstring(s); + btext_drawchar('\n'); + } +#endif /* CONFIG_BOOTX_TEXT */ +} + +/* + * pmac has no legacy IO, anything calling this function has to + * fail or bad things will happen + */ +static int pmac_check_legacy_ioport(unsigned int baseport) +{ + return -ENODEV; +} + +static int __init pmac_declare_of_platform_devices(void) +{ + struct device_node *np, *npp; + + np = find_devices("uni-n"); + if (np) { + for (np = np->child; np != NULL; np = np->sibling) + if (strncmp(np->name, "i2c", 3) == 0) { + of_platform_device_create(np, "uni-n-i2c", + NULL); + break; + } + } + np = find_devices("valkyrie"); + if (np) + of_platform_device_create(np, "valkyrie", NULL); + np = find_devices("platinum"); + if (np) + of_platform_device_create(np, "platinum", NULL); + + npp = of_find_node_by_name(NULL, "u3"); + if (npp) { + for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) { + if (strncmp(np->name, "i2c", 3) == 0) { + of_platform_device_create(np, "u3-i2c", NULL); + of_node_put(np); + break; + } + } + of_node_put(npp); + } + np = of_find_node_by_type(NULL, "smu"); + if (np) { + of_platform_device_create(np, "smu", NULL); + of_node_put(np); + } + + return 0; +} + +device_initcall(pmac_declare_of_platform_devices); + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init pmac_probe(int platform) +{ +#ifdef CONFIG_PPC64 + if (platform != PLATFORM_POWERMAC) + return 0; + + /* + * On U3, the DART (iommu) must be allocated now since it + * has an impact on htab_initialize (due to the large page it + * occupies having to be broken up so the DART itself is not + * part of the cacheable linar mapping + */ + alloc_u3_dart_table(); +#endif + +#ifdef CONFIG_PMAC_SMU + /* + * SMU based G5s need some memory below 2Gb, at least the current + * driver needs that. We have to allocate it now. We allocate 4k + * (1 small page) for now. + */ + smu_cmdbuf_abs = lmb_alloc_base(4096, 4096, 0x80000000UL); +#endif /* CONFIG_PMAC_SMU */ + + return 1; +} + +#ifdef CONFIG_PPC64 +static int pmac_probe_mode(struct pci_bus *bus) +{ + struct device_node *node = bus->sysdata; + + /* We need to use normal PCI probing for the AGP bus, + since the device for the AGP bridge isn't in the tree. */ + if (bus->self == NULL && device_is_compatible(node, "u3-agp")) + return PCI_PROBE_NORMAL; + + return PCI_PROBE_DEVTREE; +} +#endif + +struct machdep_calls __initdata pmac_md = { +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64) + .cpu_die = generic_mach_cpu_die, +#endif + .probe = pmac_probe, + .setup_arch = pmac_setup_arch, + .init_early = pmac_init_early, + .show_cpuinfo = pmac_show_cpuinfo, + .show_percpuinfo = pmac_show_percpuinfo, + .init_IRQ = pmac_pic_init, + .get_irq = mpic_get_irq, /* changed later */ + .pcibios_fixup = pmac_pcibios_fixup, + .restart = pmac_restart, + .power_off = pmac_power_off, + .halt = pmac_halt, + .time_init = pmac_time_init, + .get_boot_time = pmac_get_boot_time, + .set_rtc_time = pmac_set_rtc_time, + .get_rtc_time = pmac_get_rtc_time, + .calibrate_decr = pmac_calibrate_decr, + .feature_call = pmac_do_feature_call, + .check_legacy_ioport = pmac_check_legacy_ioport, + .progress = pmac_progress, +#ifdef CONFIG_PPC64 + .pci_probe_mode = pmac_probe_mode, + .idle_loop = native_idle, + .enable_pmcs = power4_enable_pmcs, +#endif +#ifdef CONFIG_PPC32 + .pcibios_enable_device_hook = pmac_pci_enable_device_hook, + .pcibios_after_init = pmac_pcibios_after_init, + .phys_mem_access_prot = pci_phys_mem_access_prot, +#endif +}; diff --git a/arch/powerpc/platforms/powermac/sleep.S b/arch/powerpc/platforms/powermac/sleep.S new file mode 100644 index 00000000000..22b113d19b2 --- /dev/null +++ b/arch/powerpc/platforms/powermac/sleep.S @@ -0,0 +1,396 @@ +/* + * This file contains sleep low-level functions for PowerBook G3. + * Copyright (C) 1999 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * and Paul Mackerras (paulus@samba.org). + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/config.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/cputable.h> +#include <asm/cache.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> + +#define MAGIC 0x4c617273 /* 'Lars' */ + +/* + * Structure for storing CPU registers on the stack. + */ +#define SL_SP 0 +#define SL_PC 4 +#define SL_MSR 8 +#define SL_SDR1 0xc +#define SL_SPRG0 0x10 /* 4 sprg's */ +#define SL_DBAT0 0x20 +#define SL_IBAT0 0x28 +#define SL_DBAT1 0x30 +#define SL_IBAT1 0x38 +#define SL_DBAT2 0x40 +#define SL_IBAT2 0x48 +#define SL_DBAT3 0x50 +#define SL_IBAT3 0x58 +#define SL_TB 0x60 +#define SL_R2 0x68 +#define SL_CR 0x6c +#define SL_R12 0x70 /* r12 to r31 */ +#define SL_SIZE (SL_R12 + 80) + + .section .text + .align 5 + +#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC) + +/* This gets called by via-pmu.c late during the sleep process. + * The PMU was already send the sleep command and will shut us down + * soon. We need to save all that is needed and setup the wakeup + * vector that will be called by the ROM on wakeup + */ +_GLOBAL(low_sleep_handler) +#ifndef CONFIG_6xx + blr +#else + mflr r0 + stw r0,4(r1) + stwu r1,-SL_SIZE(r1) + mfcr r0 + stw r0,SL_CR(r1) + stw r2,SL_R2(r1) + stmw r12,SL_R12(r1) + + /* Save MSR & SDR1 */ + mfmsr r4 + stw r4,SL_MSR(r1) + mfsdr1 r4 + stw r4,SL_SDR1(r1) + + /* Get a stable timebase and save it */ +1: mftbu r4 + stw r4,SL_TB(r1) + mftb r5 + stw r5,SL_TB+4(r1) + mftbu r3 + cmpw r3,r4 + bne 1b + + /* Save SPRGs */ + mfsprg r4,0 + stw r4,SL_SPRG0(r1) + mfsprg r4,1 + stw r4,SL_SPRG0+4(r1) + mfsprg r4,2 + stw r4,SL_SPRG0+8(r1) + mfsprg r4,3 + stw r4,SL_SPRG0+12(r1) + + /* Save BATs */ + mfdbatu r4,0 + stw r4,SL_DBAT0(r1) + mfdbatl r4,0 + stw r4,SL_DBAT0+4(r1) + mfdbatu r4,1 + stw r4,SL_DBAT1(r1) + mfdbatl r4,1 + stw r4,SL_DBAT1+4(r1) + mfdbatu r4,2 + stw r4,SL_DBAT2(r1) + mfdbatl r4,2 + stw r4,SL_DBAT2+4(r1) + mfdbatu r4,3 + stw r4,SL_DBAT3(r1) + mfdbatl r4,3 + stw r4,SL_DBAT3+4(r1) + mfibatu r4,0 + stw r4,SL_IBAT0(r1) + mfibatl r4,0 + stw r4,SL_IBAT0+4(r1) + mfibatu r4,1 + stw r4,SL_IBAT1(r1) + mfibatl r4,1 + stw r4,SL_IBAT1+4(r1) + mfibatu r4,2 + stw r4,SL_IBAT2(r1) + mfibatl r4,2 + stw r4,SL_IBAT2+4(r1) + mfibatu r4,3 + stw r4,SL_IBAT3(r1) + mfibatl r4,3 + stw r4,SL_IBAT3+4(r1) + + /* Backup various CPU config stuffs */ + bl __save_cpu_setup + + /* The ROM can wake us up via 2 different vectors: + * - On wallstreet & lombard, we must write a magic + * value 'Lars' at address 4 and a pointer to a + * memory location containing the PC to resume from + * at address 0. + * - On Core99, we must store the wakeup vector at + * address 0x80 and eventually it's parameters + * at address 0x84. I've have some trouble with those + * parameters however and I no longer use them. + */ + lis r5,grackle_wake_up@ha + addi r5,r5,grackle_wake_up@l + tophys(r5,r5) + stw r5,SL_PC(r1) + lis r4,KERNELBASE@h + tophys(r5,r1) + addi r5,r5,SL_PC + lis r6,MAGIC@ha + addi r6,r6,MAGIC@l + stw r5,0(r4) + stw r6,4(r4) + /* Setup stuffs at 0x80-0x84 for Core99 */ + lis r3,core99_wake_up@ha + addi r3,r3,core99_wake_up@l + tophys(r3,r3) + stw r3,0x80(r4) + stw r5,0x84(r4) + /* Store a pointer to our backup storage into + * a kernel global + */ + lis r3,sleep_storage@ha + addi r3,r3,sleep_storage@l + stw r5,0(r3) + + .globl low_cpu_die +low_cpu_die: + /* Flush & disable all caches */ + bl flush_disable_caches + + /* Turn off data relocation. */ + mfmsr r3 /* Save MSR in r7 */ + rlwinm r3,r3,0,28,26 /* Turn off DR bit */ + sync + mtmsr r3 + isync + +BEGIN_FTR_SECTION + /* Flush any pending L2 data prefetches to work around HW bug */ + sync + lis r3,0xfff0 + lwz r0,0(r3) /* perform cache-inhibited load to ROM */ + sync /* (caches are disabled at this point) */ +END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) + +/* + * Set the HID0 and MSR for sleep. + */ + mfspr r2,SPRN_HID0 + rlwinm r2,r2,0,10,7 /* clear doze, nap */ + oris r2,r2,HID0_SLEEP@h + sync + isync + mtspr SPRN_HID0,r2 + sync + +/* This loop puts us back to sleep in case we have a spurrious + * wakeup so that the host bridge properly stays asleep. The + * CPU will be turned off, either after a known time (about 1 + * second) on wallstreet & lombard, or as soon as the CPU enters + * SLEEP mode on core99 + */ + mfmsr r2 + oris r2,r2,MSR_POW@h +1: sync + mtmsr r2 + isync + b 1b + +/* + * Here is the resume code. + */ + + +/* + * Core99 machines resume here + * r4 has the physical address of SL_PC(sp) (unused) + */ +_GLOBAL(core99_wake_up) + /* Make sure HID0 no longer contains any sleep bit and that data cache + * is disabled + */ + mfspr r3,SPRN_HID0 + rlwinm r3,r3,0,11,7 /* clear SLEEP, NAP, DOZE bits */ + rlwinm 3,r3,0,18,15 /* clear DCE, ICE */ + mtspr SPRN_HID0,r3 + sync + isync + + /* sanitize MSR */ + mfmsr r3 + ori r3,r3,MSR_EE|MSR_IP + xori r3,r3,MSR_EE|MSR_IP + sync + isync + mtmsr r3 + sync + isync + + /* Recover sleep storage */ + lis r3,sleep_storage@ha + addi r3,r3,sleep_storage@l + tophys(r3,r3) + lwz r1,0(r3) + + /* Pass thru to older resume code ... */ +/* + * Here is the resume code for older machines. + * r1 has the physical address of SL_PC(sp). + */ + +grackle_wake_up: + + /* Restore the kernel's segment registers before + * we do any r1 memory access as we are not sure they + * are in a sane state above the first 256Mb region + */ + li r0,16 /* load up segment register values */ + mtctr r0 /* for context 0 */ + lis r3,0x2000 /* Ku = 1, VSID = 0 */ + li r4,0 +3: mtsrin r3,r4 + addi r3,r3,0x111 /* increment VSID */ + addis r4,r4,0x1000 /* address of next segment */ + bdnz 3b + sync + isync + + subi r1,r1,SL_PC + + /* Restore various CPU config stuffs */ + bl __restore_cpu_setup + + /* Make sure all FPRs have been initialized */ + bl reloc_offset + bl __init_fpu_registers + + /* Invalidate & enable L1 cache, we don't care about + * whatever the ROM may have tried to write to memory + */ + bl __inval_enable_L1 + + /* Restore the BATs, and SDR1. Then we can turn on the MMU. */ + lwz r4,SL_SDR1(r1) + mtsdr1 r4 + lwz r4,SL_SPRG0(r1) + mtsprg 0,r4 + lwz r4,SL_SPRG0+4(r1) + mtsprg 1,r4 + lwz r4,SL_SPRG0+8(r1) + mtsprg 2,r4 + lwz r4,SL_SPRG0+12(r1) + mtsprg 3,r4 + + lwz r4,SL_DBAT0(r1) + mtdbatu 0,r4 + lwz r4,SL_DBAT0+4(r1) + mtdbatl 0,r4 + lwz r4,SL_DBAT1(r1) + mtdbatu 1,r4 + lwz r4,SL_DBAT1+4(r1) + mtdbatl 1,r4 + lwz r4,SL_DBAT2(r1) + mtdbatu 2,r4 + lwz r4,SL_DBAT2+4(r1) + mtdbatl 2,r4 + lwz r4,SL_DBAT3(r1) + mtdbatu 3,r4 + lwz r4,SL_DBAT3+4(r1) + mtdbatl 3,r4 + lwz r4,SL_IBAT0(r1) + mtibatu 0,r4 + lwz r4,SL_IBAT0+4(r1) + mtibatl 0,r4 + lwz r4,SL_IBAT1(r1) + mtibatu 1,r4 + lwz r4,SL_IBAT1+4(r1) + mtibatl 1,r4 + lwz r4,SL_IBAT2(r1) + mtibatu 2,r4 + lwz r4,SL_IBAT2+4(r1) + mtibatl 2,r4 + lwz r4,SL_IBAT3(r1) + mtibatu 3,r4 + lwz r4,SL_IBAT3+4(r1) + mtibatl 3,r4 + +BEGIN_FTR_SECTION + li r4,0 + mtspr SPRN_DBAT4U,r4 + mtspr SPRN_DBAT4L,r4 + mtspr SPRN_DBAT5U,r4 + mtspr SPRN_DBAT5L,r4 + mtspr SPRN_DBAT6U,r4 + mtspr SPRN_DBAT6L,r4 + mtspr SPRN_DBAT7U,r4 + mtspr SPRN_DBAT7L,r4 + mtspr SPRN_IBAT4U,r4 + mtspr SPRN_IBAT4L,r4 + mtspr SPRN_IBAT5U,r4 + mtspr SPRN_IBAT5L,r4 + mtspr SPRN_IBAT6U,r4 + mtspr SPRN_IBAT6L,r4 + mtspr SPRN_IBAT7U,r4 + mtspr SPRN_IBAT7L,r4 +END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS) + + /* Flush all TLBs */ + lis r4,0x1000 +1: addic. r4,r4,-0x1000 + tlbie r4 + blt 1b + sync + + /* restore the MSR and turn on the MMU */ + lwz r3,SL_MSR(r1) + bl turn_on_mmu + + /* get back the stack pointer */ + tovirt(r1,r1) + + /* Restore TB */ + li r3,0 + mttbl r3 + lwz r3,SL_TB(r1) + lwz r4,SL_TB+4(r1) + mttbu r3 + mttbl r4 + + /* Restore the callee-saved registers and return */ + lwz r0,SL_CR(r1) + mtcr r0 + lwz r2,SL_R2(r1) + lmw r12,SL_R12(r1) + addi r1,r1,SL_SIZE + lwz r0,4(r1) + mtlr r0 + blr + +turn_on_mmu: + mflr r4 + tovirt(r4,r4) + mtsrr0 r4 + mtsrr1 r3 + sync + isync + rfi + +#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */ + + .section .data + .balign L1_CACHE_BYTES +sleep_storage: + .long 0 + .balign L1_CACHE_BYTES, 0 + +#endif /* CONFIG_6xx */ + .section .text diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c new file mode 100644 index 00000000000..e1f9443cc87 --- /dev/null +++ b/arch/powerpc/platforms/powermac/smp.c @@ -0,0 +1,865 @@ +/* + * SMP support for power macintosh. + * + * We support both the old "powersurge" SMP architecture + * and the current Core99 (G4 PowerMac) machines. + * + * Note that we don't support the very first rev. of + * Apple/DayStar 2 CPUs board, the one with the funky + * watchdog. Hopefully, none of these should be there except + * maybe internally to Apple. I should probably still add some + * code to detect this card though and disable SMP. --BenH. + * + * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net) + * and Ben Herrenschmidt <benh@kernel.crashing.org>. + * + * Support for DayStar quad CPU cards + * Copyright (C) XLR8, Inc. 1994-2000 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/hardirq.h> +#include <linux/cpu.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/time.h> +#include <asm/mpic.h> +#include <asm/cacheflush.h> +#include <asm/keylargo.h> +#include <asm/pmac_low_i2c.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +extern void __secondary_start_pmac_0(void); + +#ifdef CONFIG_PPC32 + +/* Sync flag for HW tb sync */ +static volatile int sec_tb_reset = 0; + +/* + * Powersurge (old powermac SMP) support. + */ + +/* Addresses for powersurge registers */ +#define HAMMERHEAD_BASE 0xf8000000 +#define HHEAD_CONFIG 0x90 +#define HHEAD_SEC_INTR 0xc0 + +/* register for interrupting the primary processor on the powersurge */ +/* N.B. this is actually the ethernet ROM! */ +#define PSURGE_PRI_INTR 0xf3019000 + +/* register for storing the start address for the secondary processor */ +/* N.B. this is the PCI config space address register for the 1st bridge */ +#define PSURGE_START 0xf2800000 + +/* Daystar/XLR8 4-CPU card */ +#define PSURGE_QUAD_REG_ADDR 0xf8800000 + +#define PSURGE_QUAD_IRQ_SET 0 +#define PSURGE_QUAD_IRQ_CLR 1 +#define PSURGE_QUAD_IRQ_PRIMARY 2 +#define PSURGE_QUAD_CKSTOP_CTL 3 +#define PSURGE_QUAD_PRIMARY_ARB 4 +#define PSURGE_QUAD_BOARD_ID 6 +#define PSURGE_QUAD_WHICH_CPU 7 +#define PSURGE_QUAD_CKSTOP_RDBK 8 +#define PSURGE_QUAD_RESET_CTL 11 + +#define PSURGE_QUAD_OUT(r, v) (out_8(quad_base + ((r) << 4) + 4, (v))) +#define PSURGE_QUAD_IN(r) (in_8(quad_base + ((r) << 4) + 4) & 0x0f) +#define PSURGE_QUAD_BIS(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v))) +#define PSURGE_QUAD_BIC(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v))) + +/* virtual addresses for the above */ +static volatile u8 __iomem *hhead_base; +static volatile u8 __iomem *quad_base; +static volatile u32 __iomem *psurge_pri_intr; +static volatile u8 __iomem *psurge_sec_intr; +static volatile u32 __iomem *psurge_start; + +/* values for psurge_type */ +#define PSURGE_NONE -1 +#define PSURGE_DUAL 0 +#define PSURGE_QUAD_OKEE 1 +#define PSURGE_QUAD_COTTON 2 +#define PSURGE_QUAD_ICEGRASS 3 + +/* what sort of powersurge board we have */ +static int psurge_type = PSURGE_NONE; + +/* + * Set and clear IPIs for powersurge. + */ +static inline void psurge_set_ipi(int cpu) +{ + if (psurge_type == PSURGE_NONE) + return; + if (cpu == 0) + in_be32(psurge_pri_intr); + else if (psurge_type == PSURGE_DUAL) + out_8(psurge_sec_intr, 0); + else + PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu); +} + +static inline void psurge_clr_ipi(int cpu) +{ + if (cpu > 0) { + switch(psurge_type) { + case PSURGE_DUAL: + out_8(psurge_sec_intr, ~0); + case PSURGE_NONE: + break; + default: + PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu); + } + } +} + +/* + * On powersurge (old SMP powermac architecture) we don't have + * separate IPIs for separate messages like openpic does. Instead + * we have a bitmap for each processor, where a 1 bit means that + * the corresponding message is pending for that processor. + * Ideally each cpu's entry would be in a different cache line. + * -- paulus. + */ +static unsigned long psurge_smp_message[NR_CPUS]; + +void psurge_smp_message_recv(struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + int msg; + + /* clear interrupt */ + psurge_clr_ipi(cpu); + + if (num_online_cpus() < 2) + return; + + /* make sure there is a message there */ + for (msg = 0; msg < 4; msg++) + if (test_and_clear_bit(msg, &psurge_smp_message[cpu])) + smp_message_recv(msg, regs); +} + +irqreturn_t psurge_primary_intr(int irq, void *d, struct pt_regs *regs) +{ + psurge_smp_message_recv(regs); + return IRQ_HANDLED; +} + +static void smp_psurge_message_pass(int target, int msg) +{ + int i; + + if (num_online_cpus() < 2) + return; + + for (i = 0; i < NR_CPUS; i++) { + if (!cpu_online(i)) + continue; + if (target == MSG_ALL + || (target == MSG_ALL_BUT_SELF && i != smp_processor_id()) + || target == i) { + set_bit(msg, &psurge_smp_message[i]); + psurge_set_ipi(i); + } + } +} + +/* + * Determine a quad card presence. We read the board ID register, we + * force the data bus to change to something else, and we read it again. + * It it's stable, then the register probably exist (ugh !) + */ +static int __init psurge_quad_probe(void) +{ + int type; + unsigned int i; + + type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID); + if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS + || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID)) + return PSURGE_DUAL; + + /* looks OK, try a slightly more rigorous test */ + /* bogus is not necessarily cacheline-aligned, + though I don't suppose that really matters. -- paulus */ + for (i = 0; i < 100; i++) { + volatile u32 bogus[8]; + bogus[(0+i)%8] = 0x00000000; + bogus[(1+i)%8] = 0x55555555; + bogus[(2+i)%8] = 0xFFFFFFFF; + bogus[(3+i)%8] = 0xAAAAAAAA; + bogus[(4+i)%8] = 0x33333333; + bogus[(5+i)%8] = 0xCCCCCCCC; + bogus[(6+i)%8] = 0xCCCCCCCC; + bogus[(7+i)%8] = 0x33333333; + wmb(); + asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory"); + mb(); + if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID)) + return PSURGE_DUAL; + } + return type; +} + +static void __init psurge_quad_init(void) +{ + int procbits; + + if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351); + procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU); + if (psurge_type == PSURGE_QUAD_ICEGRASS) + PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits); + else + PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits); + mdelay(33); + out_8(psurge_sec_intr, ~0); + PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits); + PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits); + if (psurge_type != PSURGE_QUAD_ICEGRASS) + PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits); + PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits); + mdelay(33); + PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits); + mdelay(33); + PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits); + mdelay(33); +} + +static int __init smp_psurge_probe(void) +{ + int i, ncpus; + + /* We don't do SMP on the PPC601 -- paulus */ + if (PVR_VER(mfspr(SPRN_PVR)) == 1) + return 1; + + /* + * The powersurge cpu board can be used in the generation + * of powermacs that have a socket for an upgradeable cpu card, + * including the 7500, 8500, 9500, 9600. + * The device tree doesn't tell you if you have 2 cpus because + * OF doesn't know anything about the 2nd processor. + * Instead we look for magic bits in magic registers, + * in the hammerhead memory controller in the case of the + * dual-cpu powersurge board. -- paulus. + */ + if (find_devices("hammerhead") == NULL) + return 1; + + hhead_base = ioremap(HAMMERHEAD_BASE, 0x800); + quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024); + psurge_sec_intr = hhead_base + HHEAD_SEC_INTR; + + psurge_type = psurge_quad_probe(); + if (psurge_type != PSURGE_DUAL) { + psurge_quad_init(); + /* All released cards using this HW design have 4 CPUs */ + ncpus = 4; + } else { + iounmap(quad_base); + if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) { + /* not a dual-cpu card */ + iounmap(hhead_base); + psurge_type = PSURGE_NONE; + return 1; + } + ncpus = 2; + } + + psurge_start = ioremap(PSURGE_START, 4); + psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); + + /* this is not actually strictly necessary -- paulus. */ + for (i = 1; i < ncpus; ++i) + smp_hw_index[i] = i; + + if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); + + return ncpus; +} + +static void __init smp_psurge_kick_cpu(int nr) +{ + unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8; + unsigned long a; + + /* may need to flush here if secondary bats aren't setup */ + for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32) + asm volatile("dcbf 0,%0" : : "r" (a) : "memory"); + asm volatile("sync"); + + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353); + + out_be32(psurge_start, start); + mb(); + + psurge_set_ipi(nr); + udelay(10); + psurge_clr_ipi(nr); + + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); +} + +/* + * With the dual-cpu powersurge board, the decrementers and timebases + * of both cpus are frozen after the secondary cpu is started up, + * until we give the secondary cpu another interrupt. This routine + * uses this to get the timebases synchronized. + * -- paulus. + */ +static void __init psurge_dual_sync_tb(int cpu_nr) +{ + int t; + + set_dec(tb_ticks_per_jiffy); + set_tb(0, 0); + last_jiffy_stamp(cpu_nr) = 0; + + if (cpu_nr > 0) { + mb(); + sec_tb_reset = 1; + return; + } + + /* wait for the secondary to have reset its TB before proceeding */ + for (t = 10000000; t > 0 && !sec_tb_reset; --t) + ; + + /* now interrupt the secondary, starting both TBs */ + psurge_set_ipi(1); + + smp_tb_synchronized = 1; +} + +static struct irqaction psurge_irqaction = { + .handler = psurge_primary_intr, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "primary IPI", +}; + +static void __init smp_psurge_setup_cpu(int cpu_nr) +{ + + if (cpu_nr == 0) { + /* If we failed to start the second CPU, we should still + * send it an IPI to start the timebase & DEC or we might + * have them stuck. + */ + if (num_online_cpus() < 2) { + if (psurge_type == PSURGE_DUAL) + psurge_set_ipi(1); + return; + } + /* reset the entry point so if we get another intr we won't + * try to startup again */ + out_be32(psurge_start, 0x100); + if (setup_irq(30, &psurge_irqaction)) + printk(KERN_ERR "Couldn't get primary IPI interrupt"); + } + + if (psurge_type == PSURGE_DUAL) + psurge_dual_sync_tb(cpu_nr); +} + +void __init smp_psurge_take_timebase(void) +{ + /* Dummy implementation */ +} + +void __init smp_psurge_give_timebase(void) +{ + /* Dummy implementation */ +} + +/* PowerSurge-style Macs */ +struct smp_ops_t psurge_smp_ops = { + .message_pass = smp_psurge_message_pass, + .probe = smp_psurge_probe, + .kick_cpu = smp_psurge_kick_cpu, + .setup_cpu = smp_psurge_setup_cpu, + .give_timebase = smp_psurge_give_timebase, + .take_timebase = smp_psurge_take_timebase, +}; +#endif /* CONFIG_PPC32 - actually powersurge support */ + +#ifdef CONFIG_PPC64 +/* + * G5s enable/disable the timebase via an i2c-connected clock chip. + */ +static struct device_node *pmac_tb_clock_chip_host; +static u8 pmac_tb_pulsar_addr; +static void (*pmac_tb_freeze)(int freeze); +static DEFINE_SPINLOCK(timebase_lock); +static unsigned long timebase; + +static void smp_core99_cypress_tb_freeze(int freeze) +{ + u8 data; + int rc; + + /* Strangely, the device-tree says address is 0xd2, but darwin + * accesses 0xd0 ... + */ + pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); + rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, + 0xd0 | pmac_low_i2c_read, + 0x81, &data, 1); + if (rc != 0) + goto bail; + + data = (data & 0xf3) | (freeze ? 0x00 : 0x0c); + + pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); + rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, + 0xd0 | pmac_low_i2c_write, + 0x81, &data, 1); + + bail: + if (rc != 0) { + printk("Cypress Timebase %s rc: %d\n", + freeze ? "freeze" : "unfreeze", rc); + panic("Timebase freeze failed !\n"); + } +} + + +static void smp_core99_pulsar_tb_freeze(int freeze) +{ + u8 data; + int rc; + + pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); + rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, + pmac_tb_pulsar_addr | pmac_low_i2c_read, + 0x2e, &data, 1); + if (rc != 0) + goto bail; + + data = (data & 0x88) | (freeze ? 0x11 : 0x22); + + pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); + rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, + pmac_tb_pulsar_addr | pmac_low_i2c_write, + 0x2e, &data, 1); + bail: + if (rc != 0) { + printk(KERN_ERR "Pulsar Timebase %s rc: %d\n", + freeze ? "freeze" : "unfreeze", rc); + panic("Timebase freeze failed !\n"); + } +} + + +static void smp_core99_give_timebase(void) +{ + /* Open i2c bus for synchronous access */ + if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0)) + panic("Can't open i2c for TB sync !\n"); + + spin_lock(&timebase_lock); + (*pmac_tb_freeze)(1); + mb(); + timebase = get_tb(); + spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + + spin_lock(&timebase_lock); + (*pmac_tb_freeze)(0); + spin_unlock(&timebase_lock); + + /* Close i2c bus */ + pmac_low_i2c_close(pmac_tb_clock_chip_host); +} + + +static void __devinit smp_core99_take_timebase(void) +{ + while (!timebase) + barrier(); + spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + spin_unlock(&timebase_lock); +} + +static void __init smp_core99_setup(int ncpus) +{ + struct device_node *cc = NULL; + struct device_node *p; + u32 *reg; + int ok; + + /* HW sync only on these platforms */ + if (!machine_is_compatible("PowerMac7,2") && + !machine_is_compatible("PowerMac7,3") && + !machine_is_compatible("RackMac3,1")) + return; + + /* Look for the clock chip */ + while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) { + p = of_get_parent(cc); + ok = p && device_is_compatible(p, "uni-n-i2c"); + of_node_put(p); + if (!ok) + continue; + + reg = (u32 *)get_property(cc, "reg", NULL); + if (reg == NULL) + continue; + + switch (*reg) { + case 0xd2: + if (device_is_compatible(cc, "pulsar-legacy-slewing")) { + pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd2; + printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + } else if (device_is_compatible(cc, "cy28508")) { + pmac_tb_freeze = smp_core99_cypress_tb_freeze; + printk(KERN_INFO "Timebase clock is Cypress chip\n"); + } + break; + case 0xd4: + pmac_tb_freeze = smp_core99_pulsar_tb_freeze; + pmac_tb_pulsar_addr = 0xd4; + printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + break; + } + if (pmac_tb_freeze != NULL) { + pmac_tb_clock_chip_host = of_get_parent(cc); + of_node_put(cc); + break; + } + } + if (pmac_tb_freeze == NULL) { + smp_ops->give_timebase = smp_generic_give_timebase; + smp_ops->take_timebase = smp_generic_take_timebase; + } +} + +/* nothing to do here, caches are already set up by service processor */ +static inline void __devinit core99_init_caches(int cpu) +{ +} + +#else /* CONFIG_PPC64 */ + +/* + * SMP G4 powermacs use a GPIO to enable/disable the timebase. + */ + +static unsigned int core99_tb_gpio; /* Timebase freeze GPIO */ + +static unsigned int pri_tb_hi, pri_tb_lo; +static unsigned int pri_tb_stamp; + +/* not __init, called in sleep/wakeup code */ +void smp_core99_give_timebase(void) +{ + unsigned long flags; + unsigned int t; + + /* wait for the secondary to be in take_timebase */ + for (t = 100000; t > 0 && !sec_tb_reset; --t) + udelay(10); + if (!sec_tb_reset) { + printk(KERN_WARNING "Timeout waiting sync on second CPU\n"); + return; + } + + /* freeze the timebase and read it */ + /* disable interrupts so the timebase is disabled for the + shortest possible time */ + local_irq_save(flags); + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4); + pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); + mb(); + pri_tb_hi = get_tbu(); + pri_tb_lo = get_tbl(); + pri_tb_stamp = last_jiffy_stamp(smp_processor_id()); + mb(); + + /* tell the secondary we're ready */ + sec_tb_reset = 2; + mb(); + + /* wait for the secondary to have taken it */ + for (t = 100000; t > 0 && sec_tb_reset; --t) + udelay(10); + if (sec_tb_reset) + printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n"); + else + smp_tb_synchronized = 1; + + /* Now, restart the timebase by leaving the GPIO to an open collector */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); + pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); + local_irq_restore(flags); +} + +/* not __init, called in sleep/wakeup code */ +void smp_core99_take_timebase(void) +{ + unsigned long flags; + + /* tell the primary we're here */ + sec_tb_reset = 1; + mb(); + + /* wait for the primary to set pri_tb_hi/lo */ + while (sec_tb_reset < 2) + mb(); + + /* set our stuff the same as the primary */ + local_irq_save(flags); + set_dec(1); + set_tb(pri_tb_hi, pri_tb_lo); + last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp; + mb(); + + /* tell the primary we're done */ + sec_tb_reset = 0; + mb(); + local_irq_restore(flags); +} + +/* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */ +volatile static long int core99_l2_cache; +volatile static long int core99_l3_cache; + +static void __devinit core99_init_caches(int cpu) +{ + if (!cpu_has_feature(CPU_FTR_L2CR)) + return; + + if (cpu == 0) { + core99_l2_cache = _get_L2CR(); + printk("CPU0: L2CR is %lx\n", core99_l2_cache); + } else { + printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR()); + _set_L2CR(0); + _set_L2CR(core99_l2_cache); + printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache); + } + + if (!cpu_has_feature(CPU_FTR_L3CR)) + return; + + if (cpu == 0){ + core99_l3_cache = _get_L3CR(); + printk("CPU0: L3CR is %lx\n", core99_l3_cache); + } else { + printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR()); + _set_L3CR(0); + _set_L3CR(core99_l3_cache); + printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache); + } +} + +static void __init smp_core99_setup(int ncpus) +{ + struct device_node *cpu; + u32 *tbprop = NULL; + int i; + + core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */ + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != NULL) { + tbprop = (u32 *)get_property(cpu, "timebase-enable", NULL); + if (tbprop) + core99_tb_gpio = *tbprop; + of_node_put(cpu); + } + + /* XXX should get this from reg properties */ + for (i = 1; i < ncpus; ++i) + smp_hw_index[i] = i; + powersave_nap = 0; +} +#endif + +static int __init smp_core99_probe(void) +{ + struct device_node *cpus; + int ncpus = 0; + + if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345); + + /* Count CPUs in the device-tree */ + for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;) + ++ncpus; + + printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus); + + /* Nothing more to do if less than 2 of them */ + if (ncpus <= 1) + return 1; + + smp_core99_setup(ncpus); + mpic_request_ipis(); + core99_init_caches(0); + + return ncpus; +} + +static void __devinit smp_core99_kick_cpu(int nr) +{ + unsigned int save_vector; + unsigned long new_vector; + unsigned long flags; + volatile unsigned int *vector + = ((volatile unsigned int *)(KERNELBASE+0x100)); + + if (nr < 0 || nr > 3) + return; + if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346); + + local_irq_save(flags); + local_irq_disable(); + + /* Save reset vector */ + save_vector = *vector; + + /* Setup fake reset vector that does + * b __secondary_start_pmac_0 + nr*8 - KERNELBASE + */ + new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8; + *vector = 0x48000002 + new_vector - KERNELBASE; + + /* flush data cache and inval instruction cache */ + flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); + + /* Put some life in our friend */ + pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0); + + /* FIXME: We wait a bit for the CPU to take the exception, I should + * instead wait for the entry code to set something for me. Well, + * ideally, all that crap will be done in prom.c and the CPU left + * in a RAM-based wait loop like CHRP. + */ + mdelay(1); + + /* Restore our exception vector */ + *vector = save_vector; + flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); + + local_irq_restore(flags); + if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347); +} + +static void __devinit smp_core99_setup_cpu(int cpu_nr) +{ + /* Setup L2/L3 */ + if (cpu_nr != 0) + core99_init_caches(cpu_nr); + + /* Setup openpic */ + mpic_setup_this_cpu(); + + if (cpu_nr == 0) { +#ifdef CONFIG_POWER4 + extern void g5_phy_disable_cpu1(void); + + /* If we didn't start the second CPU, we must take + * it off the bus + */ + if (machine_is_compatible("MacRISC4") && + num_online_cpus() < 2) + g5_phy_disable_cpu1(); +#endif /* CONFIG_POWER4 */ + if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349); + } +} + + +/* Core99 Macs (dual G4s and G5s) */ +struct smp_ops_t core99_smp_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_core99_probe, + .kick_cpu = smp_core99_kick_cpu, + .setup_cpu = smp_core99_setup_cpu, + .give_timebase = smp_core99_give_timebase, + .take_timebase = smp_core99_take_timebase, +}; + +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32) + +int __cpu_disable(void) +{ + cpu_clear(smp_processor_id(), cpu_online_map); + + /* XXX reset cpu affinity here */ + mpic_cpu_set_priority(0xf); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + mb(); + udelay(20); + asm volatile("mtdec %0" : : "r" (0x7fffffff)); + return 0; +} + +extern void low_cpu_die(void) __attribute__((noreturn)); /* in sleep.S */ +static int cpu_dead[NR_CPUS]; + +void cpu_die(void) +{ + local_irq_disable(); + cpu_dead[smp_processor_id()] = 1; + mb(); + low_cpu_die(); +} + +void __cpu_die(unsigned int cpu) +{ + int timeout; + + timeout = 1000; + while (!cpu_dead[cpu]) { + if (--timeout == 0) { + printk("CPU %u refused to die!\n", cpu); + break; + } + msleep(1); + } + cpu_callin_map[cpu] = 0; + cpu_dead[cpu] = 0; +} + +#endif diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c new file mode 100644 index 00000000000..5947b21a858 --- /dev/null +++ b/arch/powerpc/platforms/powermac/time.c @@ -0,0 +1,360 @@ +/* + * Support for periodic interrupts (100 per second) and for getting + * the current time from the RTC on Power Macintoshes. + * + * We use the decrementer register for our periodic interrupts. + * + * Paul Mackerras August 1996. + * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 2003-2005 Benjamin Herrenschmidt. + * + */ +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> +#include <linux/interrupt.h> +#include <linux/hardirq.h> +#include <linux/rtc.h> + +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/machdep.h> +#include <asm/time.h> +#include <asm/nvram.h> +#include <asm/smu.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +/* Apparently the RTC stores seconds since 1 Jan 1904 */ +#define RTC_OFFSET 2082844800 + +/* + * Calibrate the decrementer frequency with the VIA timer 1. + */ +#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ + +/* VIA registers */ +#define RS 0x200 /* skip between registers */ +#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ +#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ +#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ +#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ +#define ACR (11*RS) /* Auxiliary control register */ +#define IFR (13*RS) /* Interrupt flag register */ + +/* Bits in ACR */ +#define T1MODE 0xc0 /* Timer 1 mode */ +#define T1MODE_CONT 0x40 /* continuous interrupts */ + +/* Bits in IFR and IER */ +#define T1_INT 0x40 /* Timer 1 interrupt */ + +long __init pmac_time_init(void) +{ + s32 delta = 0; +#ifdef CONFIG_NVRAM + int dst; + + delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16; + delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8; + delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb); + if (delta & 0x00800000UL) + delta |= 0xFF000000UL; + dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0); + printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60, + dst ? "on" : "off"); +#endif + return delta; +} + +static void to_rtc_time(unsigned long now, struct rtc_time *tm) +{ + to_tm(now, tm); + tm->tm_year -= 1900; + tm->tm_mon -= 1; +} + +static unsigned long from_rtc_time(struct rtc_time *tm) +{ + return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec); +} + +#ifdef CONFIG_ADB_CUDA +static unsigned long cuda_get_time(void) +{ + struct adb_request req; + unsigned long now; + + if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0) + return 0; + while (!req.complete) + cuda_poll(); + if (req.reply_len != 7) + printk(KERN_ERR "cuda_get_time: got %d byte reply\n", + req.reply_len); + now = (req.reply[3] << 24) + (req.reply[4] << 16) + + (req.reply[5] << 8) + req.reply[6]; + return now - RTC_OFFSET; +} + +#define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm)) + +static int cuda_set_rtc_time(struct rtc_time *tm) +{ + unsigned int nowtime; + struct adb_request req; + + nowtime = from_rtc_time(tm) + RTC_OFFSET; + if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME, + nowtime >> 24, nowtime >> 16, nowtime >> 8, + nowtime) < 0) + return -ENXIO; + while (!req.complete) + cuda_poll(); + if ((req.reply_len != 3) && (req.reply_len != 7)) + printk(KERN_ERR "cuda_set_rtc_time: got %d byte reply\n", + req.reply_len); + return 0; +} + +#else +#define cuda_get_time() 0 +#define cuda_get_rtc_time(tm) +#define cuda_set_rtc_time(tm) 0 +#endif + +#ifdef CONFIG_ADB_PMU +static unsigned long pmu_get_time(void) +{ + struct adb_request req; + unsigned long now; + + if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) + return 0; + pmu_wait_complete(&req); + if (req.reply_len != 4) + printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n", + req.reply_len); + now = (req.reply[0] << 24) + (req.reply[1] << 16) + + (req.reply[2] << 8) + req.reply[3]; + return now - RTC_OFFSET; +} + +#define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm)) + +static int pmu_set_rtc_time(struct rtc_time *tm) +{ + unsigned int nowtime; + struct adb_request req; + + nowtime = from_rtc_time(tm) + RTC_OFFSET; + if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24, + nowtime >> 16, nowtime >> 8, nowtime) < 0) + return -ENXIO; + pmu_wait_complete(&req); + if (req.reply_len != 0) + printk(KERN_ERR "pmu_set_rtc_time: %d byte reply from PMU\n", + req.reply_len); + return 0; +} + +#else +#define pmu_get_time() 0 +#define pmu_get_rtc_time(tm) +#define pmu_set_rtc_time(tm) 0 +#endif + +#ifdef CONFIG_PMAC_SMU +static unsigned long smu_get_time(void) +{ + struct rtc_time tm; + + if (smu_get_rtc_time(&tm, 1)) + return 0; + return from_rtc_time(&tm); +} + +#else +#define smu_get_time() 0 +#define smu_get_rtc_time(tm, spin) +#define smu_set_rtc_time(tm, spin) 0 +#endif + +unsigned long pmac_get_boot_time(void) +{ + /* Get the time from the RTC, used only at boot time */ + switch (sys_ctrler) { + case SYS_CTRLER_CUDA: + return cuda_get_time(); + case SYS_CTRLER_PMU: + return pmu_get_time(); + case SYS_CTRLER_SMU: + return smu_get_time(); + default: + return 0; + } +} + +void pmac_get_rtc_time(struct rtc_time *tm) +{ + /* Get the time from the RTC, used only at boot time */ + switch (sys_ctrler) { + case SYS_CTRLER_CUDA: + cuda_get_rtc_time(tm); + break; + case SYS_CTRLER_PMU: + pmu_get_rtc_time(tm); + break; + case SYS_CTRLER_SMU: + smu_get_rtc_time(tm, 1); + break; + default: + ; + } +} + +int pmac_set_rtc_time(struct rtc_time *tm) +{ + switch (sys_ctrler) { + case SYS_CTRLER_CUDA: + return cuda_set_rtc_time(tm); + case SYS_CTRLER_PMU: + return pmu_set_rtc_time(tm); + case SYS_CTRLER_SMU: + return smu_set_rtc_time(tm, 1); + default: + return -ENODEV; + } +} + +#ifdef CONFIG_PPC32 +/* + * Calibrate the decrementer register using VIA timer 1. + * This is used both on powermacs and CHRP machines. + */ +int __init via_calibrate_decr(void) +{ + struct device_node *vias; + volatile unsigned char __iomem *via; + int count = VIA_TIMER_FREQ_6 / 100; + unsigned int dstart, dend; + + vias = find_devices("via-cuda"); + if (vias == 0) + vias = find_devices("via-pmu"); + if (vias == 0) + vias = find_devices("via"); + if (vias == 0 || vias->n_addrs == 0) + return 0; + via = ioremap(vias->addrs[0].address, vias->addrs[0].size); + + /* set timer 1 for continuous interrupts */ + out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); + /* set the counter to a small value */ + out_8(&via[T1CH], 2); + /* set the latch to `count' */ + out_8(&via[T1LL], count); + out_8(&via[T1LH], count >> 8); + /* wait until it hits 0 */ + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dstart = get_dec(); + /* clear the interrupt & wait until it hits 0 again */ + in_8(&via[T1CL]); + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dend = get_dec(); + + ppc_tb_freq = (dstart - dend) * 100 / 6; + + iounmap(via); + + return 1; +} +#endif + +#ifdef CONFIG_PM +/* + * Reset the time after a sleep. + */ +static int +time_sleep_notify(struct pmu_sleep_notifier *self, int when) +{ + static unsigned long time_diff; + unsigned long flags; + unsigned long seq; + struct timespec tv; + + switch (when) { + case PBOOK_SLEEP_NOW: + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + time_diff = xtime.tv_sec - pmac_get_boot_time(); + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); + break; + case PBOOK_WAKE: + tv.tv_sec = pmac_get_boot_time() + time_diff; + tv.tv_nsec = 0; + do_settimeofday(&tv); + break; + } + return PBOOK_SLEEP_OK; +} + +static struct pmu_sleep_notifier time_sleep_notifier = { + time_sleep_notify, SLEEP_LEVEL_MISC, +}; +#endif /* CONFIG_PM */ + +/* + * Query the OF and get the decr frequency. + */ +void __init pmac_calibrate_decr(void) +{ +#ifdef CONFIG_PM + /* XXX why here? */ + pmu_register_sleep_notifier(&time_sleep_notifier); +#endif /* CONFIG_PM */ + + generic_calibrate_decr(); + +#ifdef CONFIG_PPC32 + /* We assume MacRISC2 machines have correct device-tree + * calibration. That's better since the VIA itself seems + * to be slightly off. --BenH + */ + if (!machine_is_compatible("MacRISC2") && + !machine_is_compatible("MacRISC3") && + !machine_is_compatible("MacRISC4")) + if (via_calibrate_decr()) + return; + + /* Special case: QuickSilver G4s seem to have a badly calibrated + * timebase-frequency in OF, VIA is much better on these. We should + * probably implement calibration based on the KL timer on these + * machines anyway... -BenH + */ + if (machine_is_compatible("PowerMac3,5")) + if (via_calibrate_decr()) + return; +#endif +} diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig new file mode 100644 index 00000000000..673ac47a162 --- /dev/null +++ b/arch/powerpc/platforms/prep/Kconfig @@ -0,0 +1,22 @@ + +config PREP_RESIDUAL + bool "Support for PReP Residual Data" + depends on PPC_PREP + help + Some PReP systems have residual data passed to the kernel by the + firmware. This allows detection of memory size, devices present and + other useful pieces of information. Sometimes this information is + not present or incorrect, in which case it could lead to the machine + behaving incorrectly. If this happens, either disable PREP_RESIDUAL + or pass the 'noresidual' option to the kernel. + + If you are running a PReP system, say Y here, otherwise say N. + +config PROC_PREPRESIDUAL + bool "Support for reading of PReP Residual Data in /proc" + depends on PREP_RESIDUAL && PROC_FS + help + Enabling this option will create a /proc/residual file which allows + you to get at the residual data on PReP systems. You will need a tool + (lsresidual) to parse it. If you aren't on a PReP system, you don't + want this. diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig new file mode 100644 index 00000000000..2d57f588151 --- /dev/null +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -0,0 +1,42 @@ + +config PPC_SPLPAR + depends on PPC_PSERIES + bool "Support for shared-processor logical partitions" + default n + help + Enabling this option will make the kernel run more efficiently + on logically-partitioned pSeries systems which use shared + processors, that is, which share physical processors between + two or more partitions. + +config HMT + bool "Hardware multithreading" + depends on SMP && PPC_PSERIES && BROKEN + help + This option enables hardware multithreading on RS64 cpus. + pSeries systems p620 and p660 have such a cpu type. + +config EEH + bool "PCI Extended Error Handling (EEH)" if EMBEDDED + depends on PPC_PSERIES + default y if !EMBEDDED + +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config SCANLOG + tristate "Scanlog dump interface" + depends on RTAS_PROC && PPC_PSERIES + +config LPARCFG + tristate "LPAR Configuration Data" + depends on PPC_PSERIES || PPC_ISERIES + help + Provide system capacity information via human readable + <key word>=<value> pairs through a /proc/ppc64/lparcfg interface. diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile new file mode 100644 index 00000000000..5ef494e3a70 --- /dev/null +++ b/arch/powerpc/platforms/pseries/Makefile @@ -0,0 +1,5 @@ +obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ + setup.o iommu.o rtas-fw.o ras.o +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_IBMVIO) += vio.o +obj-$(CONFIG_XICS) += xics.o diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S new file mode 100644 index 00000000000..176e8da7646 --- /dev/null +++ b/arch/powerpc/platforms/pseries/hvCall.S @@ -0,0 +1,131 @@ +/* + * arch/ppc64/kernel/pSeries_hvCall.S + * + * This file contains the generic code to perform a call to the + * pSeries LPAR hypervisor. + * NOTE: this file will go away when we move to inline this work. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <asm/hvcall.h> +#include <asm/processor.h> +#include <asm/ppc_asm.h> + +#define STK_PARM(i) (48 + ((i)-3)*8) + + .text + +/* long plpar_hcall(unsigned long opcode, R3 + unsigned long arg1, R4 + unsigned long arg2, R5 + unsigned long arg3, R6 + unsigned long arg4, R7 + unsigned long *out1, R8 + unsigned long *out2, R9 + unsigned long *out3); R10 + */ +_GLOBAL(plpar_hcall) + HMT_MEDIUM + + mfcr r0 + + std r8,STK_PARM(r8)(r1) /* Save out ptrs */ + std r9,STK_PARM(r9)(r1) + std r10,STK_PARM(r10)(r1) + + stw r0,8(r1) + + HVSC /* invoke the hypervisor */ + + lwz r0,8(r1) + + ld r8,STK_PARM(r8)(r1) /* Fetch r4-r6 ret args */ + ld r9,STK_PARM(r9)(r1) + ld r10,STK_PARM(r10)(r1) + std r4,0(r8) + std r5,0(r9) + std r6,0(r10) + + mtcrf 0xff,r0 + blr /* return r3 = status */ + + +/* Simple interface with no output values (other than status) */ +_GLOBAL(plpar_hcall_norets) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + HVSC /* invoke the hypervisor */ + + lwz r0,8(r1) + mtcrf 0xff,r0 + blr /* return r3 = status */ + + +/* long plpar_hcall_8arg_2ret(unsigned long opcode, R3 + unsigned long arg1, R4 + unsigned long arg2, R5 + unsigned long arg3, R6 + unsigned long arg4, R7 + unsigned long arg5, R8 + unsigned long arg6, R9 + unsigned long arg7, R10 + unsigned long arg8, 112(R1) + unsigned long *out1); 120(R1) + */ +_GLOBAL(plpar_hcall_8arg_2ret) + HMT_MEDIUM + + mfcr r0 + ld r11,STK_PARM(r11)(r1) /* put arg8 in R11 */ + stw r0,8(r1) + + HVSC /* invoke the hypervisor */ + + lwz r0,8(r1) + ld r10,STK_PARM(r12)(r1) /* Fetch r4 ret arg */ + std r4,0(r10) + mtcrf 0xff,r0 + blr /* return r3 = status */ + + +/* long plpar_hcall_4out(unsigned long opcode, R3 + unsigned long arg1, R4 + unsigned long arg2, R5 + unsigned long arg3, R6 + unsigned long arg4, R7 + unsigned long *out1, R8 + unsigned long *out2, R9 + unsigned long *out3, R10 + unsigned long *out4); 112(R1) + */ +_GLOBAL(plpar_hcall_4out) + HMT_MEDIUM + + mfcr r0 + stw r0,8(r1) + + std r8,STK_PARM(r8)(r1) /* Save out ptrs */ + std r9,STK_PARM(r9)(r1) + std r10,STK_PARM(r10)(r1) + + HVSC /* invoke the hypervisor */ + + lwz r0,8(r1) + + ld r8,STK_PARM(r8)(r1) /* Fetch r4-r7 ret args */ + ld r9,STK_PARM(r9)(r1) + ld r10,STK_PARM(r10)(r1) + ld r11,STK_PARM(r11)(r1) + std r4,0(r8) + std r5,0(r9) + std r6,0(r10) + std r7,0(r11) + + mtcrf 0xff,r0 + blr /* return r3 = status */ diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c new file mode 100644 index 00000000000..9e90d41131d --- /dev/null +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -0,0 +1,606 @@ +/* + * arch/ppc64/kernel/pSeries_iommu.c + * + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * + * Rewrite, cleanup: + * + * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation + * + * Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/ppcdebug.h> +#include <asm/iommu.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/abs_addr.h> +#include <asm/plpar_wrappers.h> +#include <asm/pSeries_reconfig.h> +#include <asm/systemcfg.h> +#include <asm/firmware.h> +#include <asm/tce.h> +#include <asm/ppc-pci.h> + +#define DBG(fmt...) + +extern int is_python(struct device_node *); + +static void tce_build_pSeries(struct iommu_table *tbl, long index, + long npages, unsigned long uaddr, + enum dma_data_direction direction) +{ + union tce_entry t; + union tce_entry *tp; + + index <<= TCE_PAGE_FACTOR; + npages <<= TCE_PAGE_FACTOR; + + t.te_word = 0; + t.te_rdwr = 1; // Read allowed + + if (direction != DMA_TO_DEVICE) + t.te_pciwr = 1; + + tp = ((union tce_entry *)tbl->it_base) + index; + + while (npages--) { + /* can't move this out since we might cross LMB boundary */ + t.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; + + tp->te_word = t.te_word; + + uaddr += TCE_PAGE_SIZE; + tp++; + } +} + + +static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) +{ + union tce_entry t; + union tce_entry *tp; + + npages <<= TCE_PAGE_FACTOR; + index <<= TCE_PAGE_FACTOR; + + t.te_word = 0; + tp = ((union tce_entry *)tbl->it_base) + index; + + while (npages--) { + tp->te_word = t.te_word; + + tp++; + } +} + + +static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, + long npages, unsigned long uaddr, + enum dma_data_direction direction) +{ + u64 rc; + union tce_entry tce; + + tce.te_word = 0; + tce.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; + tce.te_rdwr = 1; + if (direction != DMA_TO_DEVICE) + tce.te_pciwr = 1; + + while (npages--) { + rc = plpar_tce_put((u64)tbl->it_index, + (u64)tcenum << 12, + tce.te_word ); + + if (rc && printk_ratelimit()) { + printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc); + printk("\tindex = 0x%lx\n", (u64)tbl->it_index); + printk("\ttcenum = 0x%lx\n", (u64)tcenum); + printk("\ttce val = 0x%lx\n", tce.te_word ); + show_stack(current, (unsigned long *)__get_SP()); + } + + tcenum++; + tce.te_rpn++; + } +} + +static DEFINE_PER_CPU(void *, tce_page) = NULL; + +static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, + long npages, unsigned long uaddr, + enum dma_data_direction direction) +{ + u64 rc; + union tce_entry tce, *tcep; + long l, limit; + + tcenum <<= TCE_PAGE_FACTOR; + npages <<= TCE_PAGE_FACTOR; + + if (npages == 1) + return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, + direction); + + tcep = __get_cpu_var(tce_page); + + /* This is safe to do since interrupts are off when we're called + * from iommu_alloc{,_sg}() + */ + if (!tcep) { + tcep = (void *)__get_free_page(GFP_ATOMIC); + /* If allocation fails, fall back to the loop implementation */ + if (!tcep) + return tce_build_pSeriesLP(tbl, tcenum, npages, + uaddr, direction); + __get_cpu_var(tce_page) = tcep; + } + + tce.te_word = 0; + tce.te_rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; + tce.te_rdwr = 1; + if (direction != DMA_TO_DEVICE) + tce.te_pciwr = 1; + + /* We can map max one pageful of TCEs at a time */ + do { + /* + * Set up the page with TCE data, looping through and setting + * the values. + */ + limit = min_t(long, npages, 4096/sizeof(union tce_entry)); + + for (l = 0; l < limit; l++) { + tcep[l] = tce; + tce.te_rpn++; + } + + rc = plpar_tce_put_indirect((u64)tbl->it_index, + (u64)tcenum << 12, + (u64)virt_to_abs(tcep), + limit); + + npages -= limit; + tcenum += limit; + } while (npages > 0 && !rc); + + if (rc && printk_ratelimit()) { + printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc); + printk("\tindex = 0x%lx\n", (u64)tbl->it_index); + printk("\tnpages = 0x%lx\n", (u64)npages); + printk("\ttce[0] val = 0x%lx\n", tcep[0].te_word); + show_stack(current, (unsigned long *)__get_SP()); + } +} + +static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) +{ + u64 rc; + union tce_entry tce; + + tcenum <<= TCE_PAGE_FACTOR; + npages <<= TCE_PAGE_FACTOR; + + tce.te_word = 0; + + while (npages--) { + rc = plpar_tce_put((u64)tbl->it_index, + (u64)tcenum << 12, + tce.te_word); + + if (rc && printk_ratelimit()) { + printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc); + printk("\tindex = 0x%lx\n", (u64)tbl->it_index); + printk("\ttcenum = 0x%lx\n", (u64)tcenum); + printk("\ttce val = 0x%lx\n", tce.te_word ); + show_stack(current, (unsigned long *)__get_SP()); + } + + tcenum++; + } +} + + +static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) +{ + u64 rc; + union tce_entry tce; + + tcenum <<= TCE_PAGE_FACTOR; + npages <<= TCE_PAGE_FACTOR; + + tce.te_word = 0; + + rc = plpar_tce_stuff((u64)tbl->it_index, + (u64)tcenum << 12, + tce.te_word, + npages); + + if (rc && printk_ratelimit()) { + printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n"); + printk("\trc = %ld\n", rc); + printk("\tindex = 0x%lx\n", (u64)tbl->it_index); + printk("\tnpages = 0x%lx\n", (u64)npages); + printk("\ttce val = 0x%lx\n", tce.te_word ); + show_stack(current, (unsigned long *)__get_SP()); + } +} + +static void iommu_table_setparms(struct pci_controller *phb, + struct device_node *dn, + struct iommu_table *tbl) +{ + struct device_node *node; + unsigned long *basep; + unsigned int *sizep; + + node = (struct device_node *)phb->arch_data; + + basep = (unsigned long *)get_property(node, "linux,tce-base", NULL); + sizep = (unsigned int *)get_property(node, "linux,tce-size", NULL); + if (basep == NULL || sizep == NULL) { + printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has " + "missing tce entries !\n", dn->full_name); + return; + } + + tbl->it_base = (unsigned long)__va(*basep); + memset((void *)tbl->it_base, 0, *sizep); + + tbl->it_busno = phb->bus->number; + + /* Units of tce entries */ + tbl->it_offset = phb->dma_window_base_cur >> PAGE_SHIFT; + + /* Test if we are going over 2GB of DMA space */ + if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) { + udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); + panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); + } + + phb->dma_window_base_cur += phb->dma_window_size; + + /* Set the tce table size - measured in entries */ + tbl->it_size = phb->dma_window_size >> PAGE_SHIFT; + + tbl->it_index = 0; + tbl->it_blocksize = 16; + tbl->it_type = TCE_PCI; +} + +/* + * iommu_table_setparms_lpar + * + * Function: On pSeries LPAR systems, return TCE table info, given a pci bus. + * + * ToDo: properly interpret the ibm,dma-window property. The definition is: + * logical-bus-number (1 word) + * phys-address (#address-cells words) + * size (#cell-size words) + * + * Currently we hard code these sizes (more or less). + */ +static void iommu_table_setparms_lpar(struct pci_controller *phb, + struct device_node *dn, + struct iommu_table *tbl, + unsigned int *dma_window) +{ + tbl->it_busno = PCI_DN(dn)->bussubno; + + /* TODO: Parse field size properties properly. */ + tbl->it_size = (((unsigned long)dma_window[4] << 32) | + (unsigned long)dma_window[5]) >> PAGE_SHIFT; + tbl->it_offset = (((unsigned long)dma_window[2] << 32) | + (unsigned long)dma_window[3]) >> PAGE_SHIFT; + tbl->it_base = 0; + tbl->it_index = dma_window[0]; + tbl->it_blocksize = 16; + tbl->it_type = TCE_PCI; +} + +static void iommu_bus_setup_pSeries(struct pci_bus *bus) +{ + struct device_node *dn; + struct iommu_table *tbl; + struct device_node *isa_dn, *isa_dn_orig; + struct device_node *tmp; + struct pci_dn *pci; + int children; + + DBG("iommu_bus_setup_pSeries, bus %p, bus->self %p\n", bus, bus->self); + + dn = pci_bus_to_OF_node(bus); + pci = PCI_DN(dn); + + if (bus->self) { + /* This is not a root bus, any setup will be done for the + * device-side of the bridge in iommu_dev_setup_pSeries(). + */ + return; + } + + /* Check if the ISA bus on the system is under + * this PHB. + */ + isa_dn = isa_dn_orig = of_find_node_by_type(NULL, "isa"); + + while (isa_dn && isa_dn != dn) + isa_dn = isa_dn->parent; + + if (isa_dn_orig) + of_node_put(isa_dn_orig); + + /* Count number of direct PCI children of the PHB. + * All PCI device nodes have class-code property, so it's + * an easy way to find them. + */ + for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling) + if (get_property(tmp, "class-code", NULL)) + children++; + + DBG("Children: %d\n", children); + + /* Calculate amount of DMA window per slot. Each window must be + * a power of two (due to pci_alloc_consistent requirements). + * + * Keep 256MB aside for PHBs with ISA. + */ + + if (!isa_dn) { + /* No ISA/IDE - just set window size and return */ + pci->phb->dma_window_size = 0x80000000ul; /* To be divided */ + + while (pci->phb->dma_window_size * children > 0x80000000ul) + pci->phb->dma_window_size >>= 1; + DBG("No ISA/IDE, window size is 0x%lx\n", + pci->phb->dma_window_size); + pci->phb->dma_window_base_cur = 0; + + return; + } + + /* If we have ISA, then we probably have an IDE + * controller too. Allocate a 128MB table but + * skip the first 128MB to avoid stepping on ISA + * space. + */ + pci->phb->dma_window_size = 0x8000000ul; + pci->phb->dma_window_base_cur = 0x8000000ul; + + tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); + + iommu_table_setparms(pci->phb, dn, tbl); + pci->iommu_table = iommu_init_table(tbl); + + /* Divide the rest (1.75GB) among the children */ + pci->phb->dma_window_size = 0x80000000ul; + while (pci->phb->dma_window_size * children > 0x70000000ul) + pci->phb->dma_window_size >>= 1; + + DBG("ISA/IDE, window size is 0x%lx\n", pci->phb->dma_window_size); + +} + + +static void iommu_bus_setup_pSeriesLP(struct pci_bus *bus) +{ + struct iommu_table *tbl; + struct device_node *dn, *pdn; + struct pci_dn *ppci; + unsigned int *dma_window = NULL; + + DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus->self); + + dn = pci_bus_to_OF_node(bus); + + /* Find nearest ibm,dma-window, walking up the device tree */ + for (pdn = dn; pdn != NULL; pdn = pdn->parent) { + dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL); + if (dma_window != NULL) + break; + } + + if (dma_window == NULL) { + DBG("iommu_bus_setup_pSeriesLP: bus %s seems to have no ibm,dma-window property\n", dn->full_name); + return; + } + + ppci = pdn->data; + if (!ppci->iommu_table) { + /* Bussubno hasn't been copied yet. + * Do it now because iommu_table_setparms_lpar needs it. + */ + + ppci->bussubno = bus->number; + + tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table), + GFP_KERNEL); + + iommu_table_setparms_lpar(ppci->phb, pdn, tbl, dma_window); + + ppci->iommu_table = iommu_init_table(tbl); + } + + if (pdn != dn) + PCI_DN(dn)->iommu_table = ppci->iommu_table; +} + + +static void iommu_dev_setup_pSeries(struct pci_dev *dev) +{ + struct device_node *dn, *mydn; + struct iommu_table *tbl; + + DBG("iommu_dev_setup_pSeries, dev %p (%s)\n", dev, pci_name(dev)); + + mydn = dn = pci_device_to_OF_node(dev); + + /* If we're the direct child of a root bus, then we need to allocate + * an iommu table ourselves. The bus setup code should have setup + * the window sizes already. + */ + if (!dev->bus->self) { + DBG(" --> first child, no bridge. Allocating iommu table.\n"); + tbl = kmalloc(sizeof(struct iommu_table), GFP_KERNEL); + iommu_table_setparms(PCI_DN(dn)->phb, dn, tbl); + PCI_DN(mydn)->iommu_table = iommu_init_table(tbl); + + return; + } + + /* If this device is further down the bus tree, search upwards until + * an already allocated iommu table is found and use that. + */ + + while (dn && dn->data && PCI_DN(dn)->iommu_table == NULL) + dn = dn->parent; + + if (dn && dn->data) { + PCI_DN(mydn)->iommu_table = PCI_DN(dn)->iommu_table; + } else { + DBG("iommu_dev_setup_pSeries, dev %p (%s) has no iommu table\n", dev, pci_name(dev)); + } +} + +static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) +{ + int err = NOTIFY_OK; + struct device_node *np = node; + struct pci_dn *pci = np->data; + + switch (action) { + case PSERIES_RECONFIG_REMOVE: + if (pci->iommu_table && + get_property(np, "ibm,dma-window", NULL)) + iommu_free_table(np); + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block iommu_reconfig_nb = { + .notifier_call = iommu_reconfig_notifier, +}; + +static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) +{ + struct device_node *pdn, *dn; + struct iommu_table *tbl; + int *dma_window = NULL; + struct pci_dn *pci; + + DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, pci_name(dev)); + + /* dev setup for LPAR is a little tricky, since the device tree might + * contain the dma-window properties per-device and not neccesarily + * for the bus. So we need to search upwards in the tree until we + * either hit a dma-window property, OR find a parent with a table + * already allocated. + */ + dn = pci_device_to_OF_node(dev); + + for (pdn = dn; pdn && pdn->data && !PCI_DN(pdn)->iommu_table; + pdn = pdn->parent) { + dma_window = (unsigned int *) + get_property(pdn, "ibm,dma-window", NULL); + if (dma_window) + break; + } + + /* Check for parent == NULL so we don't try to setup the empty EADS + * slots on POWER4 machines. + */ + if (dma_window == NULL || pdn->parent == NULL) { + DBG("No dma window for device, linking to parent\n"); + PCI_DN(dn)->iommu_table = PCI_DN(pdn)->iommu_table; + return; + } else { + DBG("Found DMA window, allocating table\n"); + } + + pci = pdn->data; + if (!pci->iommu_table) { + /* iommu_table_setparms_lpar needs bussubno. */ + pci->bussubno = pci->phb->bus->number; + + tbl = (struct iommu_table *)kmalloc(sizeof(struct iommu_table), + GFP_KERNEL); + + iommu_table_setparms_lpar(pci->phb, pdn, tbl, dma_window); + + pci->iommu_table = iommu_init_table(tbl); + } + + if (pdn != dn) + PCI_DN(dn)->iommu_table = pci->iommu_table; +} + +static void iommu_bus_setup_null(struct pci_bus *b) { } +static void iommu_dev_setup_null(struct pci_dev *d) { } + +/* These are called very early. */ +void iommu_init_early_pSeries(void) +{ + if (of_chosen && get_property(of_chosen, "linux,iommu-off", NULL)) { + /* Direct I/O, IOMMU off */ + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup_null; + pci_direct_iommu_init(); + + return; + } + + if (systemcfg->platform & PLATFORM_LPAR) { + if (firmware_has_feature(FW_FEATURE_MULTITCE)) { + ppc_md.tce_build = tce_buildmulti_pSeriesLP; + ppc_md.tce_free = tce_freemulti_pSeriesLP; + } else { + ppc_md.tce_build = tce_build_pSeriesLP; + ppc_md.tce_free = tce_free_pSeriesLP; + } + ppc_md.iommu_bus_setup = iommu_bus_setup_pSeriesLP; + ppc_md.iommu_dev_setup = iommu_dev_setup_pSeriesLP; + } else { + ppc_md.tce_build = tce_build_pSeries; + ppc_md.tce_free = tce_free_pSeries; + ppc_md.iommu_bus_setup = iommu_bus_setup_pSeries; + ppc_md.iommu_dev_setup = iommu_dev_setup_pSeries; + } + + + pSeries_reconfig_notifier_register(&iommu_reconfig_nb); + + pci_iommu_init(); +} + diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c new file mode 100644 index 00000000000..268d8362dde --- /dev/null +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -0,0 +1,517 @@ +/* + * pSeries_lpar.c + * Copyright (C) 2001 Todd Inglett, IBM Corporation + * + * pSeries LPAR support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define DEBUG + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/machdep.h> +#include <asm/abs_addr.h> +#include <asm/mmu_context.h> +#include <asm/ppcdebug.h> +#include <asm/iommu.h> +#include <asm/tlbflush.h> +#include <asm/tlb.h> +#include <asm/prom.h> +#include <asm/abs_addr.h> +#include <asm/cputable.h> +#include <asm/plpar_wrappers.h> + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* in pSeries_hvCall.S */ +EXPORT_SYMBOL(plpar_hcall); +EXPORT_SYMBOL(plpar_hcall_4out); +EXPORT_SYMBOL(plpar_hcall_norets); +EXPORT_SYMBOL(plpar_hcall_8arg_2ret); + +extern void pSeries_find_serial_port(void); + + +int vtermno; /* virtual terminal# for udbg */ + +#define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) +static void udbg_hvsi_putc(unsigned char c) +{ + /* packet's seqno isn't used anyways */ + uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c }; + int rc; + + if (c == '\n') + udbg_hvsi_putc('\r'); + + do { + rc = plpar_put_term_char(vtermno, sizeof(packet), packet); + } while (rc == H_Busy); +} + +static long hvsi_udbg_buf_len; +static uint8_t hvsi_udbg_buf[256]; + +static int udbg_hvsi_getc_poll(void) +{ + unsigned char ch; + int rc, i; + + if (hvsi_udbg_buf_len == 0) { + rc = plpar_get_term_char(vtermno, &hvsi_udbg_buf_len, hvsi_udbg_buf); + if (rc != H_Success || hvsi_udbg_buf[0] != 0xff) { + /* bad read or non-data packet */ + hvsi_udbg_buf_len = 0; + } else { + /* remove the packet header */ + for (i = 4; i < hvsi_udbg_buf_len; i++) + hvsi_udbg_buf[i-4] = hvsi_udbg_buf[i]; + hvsi_udbg_buf_len -= 4; + } + } + + if (hvsi_udbg_buf_len <= 0 || hvsi_udbg_buf_len > 256) { + /* no data ready */ + hvsi_udbg_buf_len = 0; + return -1; + } + + ch = hvsi_udbg_buf[0]; + /* shift remaining data down */ + for (i = 1; i < hvsi_udbg_buf_len; i++) { + hvsi_udbg_buf[i-1] = hvsi_udbg_buf[i]; + } + hvsi_udbg_buf_len--; + + return ch; +} + +static unsigned char udbg_hvsi_getc(void) +{ + int ch; + for (;;) { + ch = udbg_hvsi_getc_poll(); + if (ch == -1) { + /* This shouldn't be needed...but... */ + volatile unsigned long delay; + for (delay=0; delay < 2000000; delay++) + ; + } else { + return ch; + } + } +} + +static void udbg_putcLP(unsigned char c) +{ + char buf[16]; + unsigned long rc; + + if (c == '\n') + udbg_putcLP('\r'); + + buf[0] = c; + do { + rc = plpar_put_term_char(vtermno, 1, buf); + } while(rc == H_Busy); +} + +/* Buffered chars getc */ +static long inbuflen; +static long inbuf[2]; /* must be 2 longs */ + +static int udbg_getc_pollLP(void) +{ + /* The interface is tricky because it may return up to 16 chars. + * We save them statically for future calls to udbg_getc(). + */ + char ch, *buf = (char *)inbuf; + int i; + long rc; + if (inbuflen == 0) { + /* get some more chars. */ + inbuflen = 0; + rc = plpar_get_term_char(vtermno, &inbuflen, buf); + if (rc != H_Success) + inbuflen = 0; /* otherwise inbuflen is garbage */ + } + if (inbuflen <= 0 || inbuflen > 16) { + /* Catch error case as well as other oddities (corruption) */ + inbuflen = 0; + return -1; + } + ch = buf[0]; + for (i = 1; i < inbuflen; i++) /* shuffle them down. */ + buf[i-1] = buf[i]; + inbuflen--; + return ch; +} + +static unsigned char udbg_getcLP(void) +{ + int ch; + for (;;) { + ch = udbg_getc_pollLP(); + if (ch == -1) { + /* This shouldn't be needed...but... */ + volatile unsigned long delay; + for (delay=0; delay < 2000000; delay++) + ; + } else { + return ch; + } + } +} + +/* call this from early_init() for a working debug console on + * vterm capable LPAR machines + */ +void udbg_init_debug_lpar(void) +{ + vtermno = 0; + udbg_putc = udbg_putcLP; + udbg_getc = udbg_getcLP; + udbg_getc_poll = udbg_getc_pollLP; +} + +/* returns 0 if couldn't find or use /chosen/stdout as console */ +int find_udbg_vterm(void) +{ + struct device_node *stdout_node; + u32 *termno; + char *name; + int found = 0; + + /* find the boot console from /chosen/stdout */ + if (!of_chosen) + return 0; + name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) + return 0; + stdout_node = of_find_node_by_path(name); + if (!stdout_node) + return 0; + + /* now we have the stdout node; figure out what type of device it is. */ + name = (char *)get_property(stdout_node, "name", NULL); + if (!name) { + printk(KERN_WARNING "stdout node missing 'name' property!\n"); + goto out; + } + + if (strncmp(name, "vty", 3) == 0) { + if (device_is_compatible(stdout_node, "hvterm1")) { + termno = (u32 *)get_property(stdout_node, "reg", NULL); + if (termno) { + vtermno = termno[0]; + udbg_putc = udbg_putcLP; + udbg_getc = udbg_getcLP; + udbg_getc_poll = udbg_getc_pollLP; + found = 1; + } + } else if (device_is_compatible(stdout_node, "hvterm-protocol")) { + termno = (u32 *)get_property(stdout_node, "reg", NULL); + if (termno) { + vtermno = termno[0]; + udbg_putc = udbg_hvsi_putc; + udbg_getc = udbg_hvsi_getc; + udbg_getc_poll = udbg_hvsi_getc_poll; + found = 1; + } + } + } else if (strncmp(name, "serial", 6)) { + /* XXX fix ISA serial console */ + printk(KERN_WARNING "serial stdout on LPAR ('%s')! " + "can't print udbg messages\n", + stdout_node->full_name); + } else { + printk(KERN_WARNING "don't know how to print to stdout '%s'\n", + stdout_node->full_name); + } + +out: + of_node_put(stdout_node); + return found; +} + +void vpa_init(int cpu) +{ + int hwcpu = get_hard_smp_processor_id(cpu); + unsigned long vpa = (unsigned long)&(paca[cpu].lppaca); + long ret; + unsigned long flags; + + /* Register the Virtual Processor Area (VPA) */ + flags = 1UL << (63 - 18); + + if (cpu_has_feature(CPU_FTR_ALTIVEC)) + paca[cpu].lppaca.vmxregs_in_use = 1; + + ret = register_vpa(flags, hwcpu, __pa(vpa)); + + if (ret) + printk(KERN_ERR "WARNING: vpa_init: VPA registration for " + "cpu %d (hw %d) of area %lx returns %ld\n", + cpu, hwcpu, __pa(vpa), ret); +} + +long pSeries_lpar_hpte_insert(unsigned long hpte_group, + unsigned long va, unsigned long prpn, + unsigned long vflags, unsigned long rflags) +{ + unsigned long lpar_rc; + unsigned long flags; + unsigned long slot; + unsigned long hpte_v, hpte_r; + unsigned long dummy0, dummy1; + + hpte_v = ((va >> 23) << HPTE_V_AVPN_SHIFT) | vflags | HPTE_V_VALID; + if (vflags & HPTE_V_LARGE) + hpte_v &= ~(1UL << HPTE_V_AVPN_SHIFT); + + hpte_r = (prpn << HPTE_R_RPN_SHIFT) | rflags; + + /* Now fill in the actual HPTE */ + /* Set CEC cookie to 0 */ + /* Zero page = 0 */ + /* I-cache Invalidate = 0 */ + /* I-cache synchronize = 0 */ + /* Exact = 0 */ + flags = 0; + + /* XXX why is this here? - Anton */ + if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) + hpte_r &= ~_PAGE_COHERENT; + + lpar_rc = plpar_hcall(H_ENTER, flags, hpte_group, hpte_v, + hpte_r, &slot, &dummy0, &dummy1); + + if (unlikely(lpar_rc == H_PTEG_Full)) + return -1; + + /* + * Since we try and ioremap PHBs we don't own, the pte insert + * will fail. However we must catch the failure in hash_page + * or we will loop forever, so return -2 in this case. + */ + if (unlikely(lpar_rc != H_Success)) + return -2; + + /* Because of iSeries, we have to pass down the secondary + * bucket bit here as well + */ + return (slot & 7) | (!!(vflags & HPTE_V_SECONDARY) << 3); +} + +static DEFINE_SPINLOCK(pSeries_lpar_tlbie_lock); + +static long pSeries_lpar_hpte_remove(unsigned long hpte_group) +{ + unsigned long slot_offset; + unsigned long lpar_rc; + int i; + unsigned long dummy1, dummy2; + + /* pick a random slot to start at */ + slot_offset = mftb() & 0x7; + + for (i = 0; i < HPTES_PER_GROUP; i++) { + + /* don't remove a bolted entry */ + lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset, + (0x1UL << 4), &dummy1, &dummy2); + + if (lpar_rc == H_Success) + return i; + + BUG_ON(lpar_rc != H_Not_Found); + + slot_offset++; + slot_offset &= 0x7; + } + + return -1; +} + +static void pSeries_lpar_hptab_clear(void) +{ + unsigned long size_bytes = 1UL << ppc64_pft_size; + unsigned long hpte_count = size_bytes >> 4; + unsigned long dummy1, dummy2; + int i; + + /* TODO: Use bulk call */ + for (i = 0; i < hpte_count; i++) + plpar_pte_remove(0, i, 0, &dummy1, &dummy2); +} + +/* + * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and + * the low 3 bits of flags happen to line up. So no transform is needed. + * We can probably optimize here and assume the high bits of newpp are + * already zero. For now I am paranoid. + */ +static long pSeries_lpar_hpte_updatepp(unsigned long slot, unsigned long newpp, + unsigned long va, int large, int local) +{ + unsigned long lpar_rc; + unsigned long flags = (newpp & 7) | H_AVPN; + unsigned long avpn = va >> 23; + + if (large) + avpn &= ~0x1UL; + + lpar_rc = plpar_pte_protect(flags, slot, (avpn << 7)); + + if (lpar_rc == H_Not_Found) + return -1; + + BUG_ON(lpar_rc != H_Success); + + return 0; +} + +static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot) +{ + unsigned long dword0; + unsigned long lpar_rc; + unsigned long dummy_word1; + unsigned long flags; + + /* Read 1 pte at a time */ + /* Do not need RPN to logical page translation */ + /* No cross CEC PFT access */ + flags = 0; + + lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1); + + BUG_ON(lpar_rc != H_Success); + + return dword0; +} + +static long pSeries_lpar_hpte_find(unsigned long vpn) +{ + unsigned long hash; + unsigned long i, j; + long slot; + unsigned long hpte_v; + + hash = hpt_hash(vpn, 0); + + for (j = 0; j < 2; j++) { + slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; + for (i = 0; i < HPTES_PER_GROUP; i++) { + hpte_v = pSeries_lpar_hpte_getword0(slot); + + if ((HPTE_V_AVPN_VAL(hpte_v) == (vpn >> 11)) + && (hpte_v & HPTE_V_VALID) + && (!!(hpte_v & HPTE_V_SECONDARY) == j)) { + /* HPTE matches */ + if (j) + slot = -slot; + return slot; + } + ++slot; + } + hash = ~hash; + } + + return -1; +} + +static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp, + unsigned long ea) +{ + unsigned long lpar_rc; + unsigned long vsid, va, vpn, flags; + long slot; + + vsid = get_kernel_vsid(ea); + va = (vsid << 28) | (ea & 0x0fffffff); + vpn = va >> PAGE_SHIFT; + + slot = pSeries_lpar_hpte_find(vpn); + BUG_ON(slot == -1); + + flags = newpp & 7; + lpar_rc = plpar_pte_protect(flags, slot, 0); + + BUG_ON(lpar_rc != H_Success); +} + +static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va, + int large, int local) +{ + unsigned long avpn = va >> 23; + unsigned long lpar_rc; + unsigned long dummy1, dummy2; + + if (large) + avpn &= ~0x1UL; + + lpar_rc = plpar_pte_remove(H_AVPN, slot, (avpn << 7), &dummy1, + &dummy2); + + if (lpar_rc == H_Not_Found) + return; + + BUG_ON(lpar_rc != H_Success); +} + +/* + * Take a spinlock around flushes to avoid bouncing the hypervisor tlbie + * lock. + */ +void pSeries_lpar_flush_hash_range(unsigned long number, int local) +{ + int i; + unsigned long flags = 0; + struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); + int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); + + if (lock_tlbie) + spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags); + + for (i = 0; i < number; i++) + flush_hash_page(batch->vaddr[i], batch->pte[i], local); + + if (lock_tlbie) + spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags); +} + +void hpte_init_lpar(void) +{ + ppc_md.hpte_invalidate = pSeries_lpar_hpte_invalidate; + ppc_md.hpte_updatepp = pSeries_lpar_hpte_updatepp; + ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp; + ppc_md.hpte_insert = pSeries_lpar_hpte_insert; + ppc_md.hpte_remove = pSeries_lpar_hpte_remove; + ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range; + ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear; + + htab_finish_init(); +} diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c new file mode 100644 index 00000000000..18abfb1f4e2 --- /dev/null +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -0,0 +1,148 @@ +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * /dev/nvram driver for PPC64 + * + * This perhaps should live in drivers/char + */ + + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <asm/uaccess.h> +#include <asm/nvram.h> +#include <asm/rtas.h> +#include <asm/prom.h> +#include <asm/machdep.h> + +static unsigned int nvram_size; +static int nvram_fetch, nvram_store; +static char nvram_buf[NVRW_CNT]; /* assume this is in the first 4GB */ +static DEFINE_SPINLOCK(nvram_lock); + + +static ssize_t pSeries_nvram_read(char *buf, size_t count, loff_t *index) +{ + unsigned int i; + unsigned long len; + int done; + unsigned long flags; + char *p = buf; + + + if (nvram_size == 0 || nvram_fetch == RTAS_UNKNOWN_SERVICE) + return -ENODEV; + + if (*index >= nvram_size) + return 0; + + i = *index; + if (i + count > nvram_size) + count = nvram_size - i; + + spin_lock_irqsave(&nvram_lock, flags); + + for (; count != 0; count -= len) { + len = count; + if (len > NVRW_CNT) + len = NVRW_CNT; + + if ((rtas_call(nvram_fetch, 3, 2, &done, i, __pa(nvram_buf), + len) != 0) || len != done) { + spin_unlock_irqrestore(&nvram_lock, flags); + return -EIO; + } + + memcpy(p, nvram_buf, len); + + p += len; + i += len; + } + + spin_unlock_irqrestore(&nvram_lock, flags); + + *index = i; + return p - buf; +} + +static ssize_t pSeries_nvram_write(char *buf, size_t count, loff_t *index) +{ + unsigned int i; + unsigned long len; + int done; + unsigned long flags; + const char *p = buf; + + if (nvram_size == 0 || nvram_store == RTAS_UNKNOWN_SERVICE) + return -ENODEV; + + if (*index >= nvram_size) + return 0; + + i = *index; + if (i + count > nvram_size) + count = nvram_size - i; + + spin_lock_irqsave(&nvram_lock, flags); + + for (; count != 0; count -= len) { + len = count; + if (len > NVRW_CNT) + len = NVRW_CNT; + + memcpy(nvram_buf, p, len); + + if ((rtas_call(nvram_store, 3, 2, &done, i, __pa(nvram_buf), + len) != 0) || len != done) { + spin_unlock_irqrestore(&nvram_lock, flags); + return -EIO; + } + + p += len; + i += len; + } + spin_unlock_irqrestore(&nvram_lock, flags); + + *index = i; + return p - buf; +} + +static ssize_t pSeries_nvram_get_size(void) +{ + return nvram_size ? nvram_size : -ENODEV; +} + +int __init pSeries_nvram_init(void) +{ + struct device_node *nvram; + unsigned int *nbytes_p, proplen; + + nvram = of_find_node_by_type(NULL, "nvram"); + if (nvram == NULL) + return -ENODEV; + + nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen); + if (nbytes_p == NULL || proplen != sizeof(unsigned int)) + return -EIO; + + nvram_size = *nbytes_p; + + nvram_fetch = rtas_token("nvram-fetch"); + nvram_store = rtas_token("nvram-store"); + printk(KERN_INFO "PPC64 nvram contains %d bytes\n", nvram_size); + of_node_put(nvram); + + ppc_md.nvram_read = pSeries_nvram_read; + ppc_md.nvram_write = pSeries_nvram_write; + ppc_md.nvram_size = pSeries_nvram_get_size; + + return 0; +} diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c new file mode 100644 index 00000000000..c198656a3bb --- /dev/null +++ b/arch/powerpc/platforms/pseries/pci.c @@ -0,0 +1,142 @@ +/* + * arch/ppc64/kernel/pSeries_pci.c + * + * Copyright (C) 2001 Dave Engebretsen, IBM Corporation + * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM + * + * pSeries specific routines for PCI. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> + +#include <asm/pci-bridge.h> +#include <asm/prom.h> +#include <asm/ppc-pci.h> + +static int __devinitdata s7a_workaround = -1; + +#if 0 +void pcibios_name_device(struct pci_dev *dev) +{ + struct device_node *dn; + + /* + * Add IBM loc code (slot) as a prefix to the device names for service + */ + dn = pci_device_to_OF_node(dev); + if (dn) { + char *loc_code = get_property(dn, "ibm,loc-code", 0); + if (loc_code) { + int loc_len = strlen(loc_code); + if (loc_len < sizeof(dev->dev.name)) { + memmove(dev->dev.name+loc_len+1, dev->dev.name, + sizeof(dev->dev.name)-loc_len-1); + memcpy(dev->dev.name, loc_code, loc_len); + dev->dev.name[loc_len] = ' '; + dev->dev.name[sizeof(dev->dev.name)-1] = '\0'; + } + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device); +#endif + +static void __devinit check_s7a(void) +{ + struct device_node *root; + char *model; + + s7a_workaround = 0; + root = of_find_node_by_path("/"); + if (root) { + model = get_property(root, "model", NULL); + if (model && !strcmp(model, "IBM,7013-S7A")) + s7a_workaround = 1; + of_node_put(root); + } +} + +void __devinit pSeries_irq_bus_setup(struct pci_bus *bus) +{ + struct pci_dev *dev; + + if (s7a_workaround < 0) + check_s7a(); + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_read_irq_line(dev); + if (s7a_workaround) { + if (dev->irq > 16) { + dev->irq -= 3; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + dev->irq); + } + } + } +} + +static void __init pSeries_request_regions(void) +{ + if (!isa_io_base) + return; + + request_region(0x20,0x20,"pic1"); + request_region(0xa0,0x20,"pic2"); + request_region(0x00,0x20,"dma1"); + request_region(0x40,0x20,"timer"); + request_region(0x80,0x10,"dma page reg"); + request_region(0xc0,0x20,"dma2"); +} + +void __init pSeries_final_fixup(void) +{ + phbs_remap_io(); + pSeries_request_regions(); + + pci_addr_cache_build(); +} + +/* + * Assume the winbond 82c105 is the IDE controller on a + * p610. We should probably be more careful in case + * someone tries to plug in a similar adapter. + */ +static void fixup_winbond_82c105(struct pci_dev* dev) +{ + int i; + unsigned int reg; + + if (!(systemcfg->platform & PLATFORM_PSERIES)) + return; + + printk("Using INTC for W82c105 IDE controller.\n"); + pci_read_config_dword(dev, 0x40, ®); + /* Enable LEGIRQ to use INTC instead of ISA interrupts */ + pci_write_config_dword(dev, 0x40, reg | (1<<11)); + + for (i = 0; i < DEVICE_COUNT_RESOURCE; ++i) { + /* zap the 2nd function of the winbond chip */ + if (dev->resource[i].flags & IORESOURCE_IO + && dev->bus->number == 0 && dev->devfn == 0x81) + dev->resource[i].flags &= ~IORESOURCE_IO; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, + fixup_winbond_82c105); diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c new file mode 100644 index 00000000000..6562ff4b0a8 --- /dev/null +++ b/arch/powerpc/platforms/pseries/ras.c @@ -0,0 +1,352 @@ +/* + * Copyright (C) 2001 Dave Engebretsen IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* Change Activity: + * 2001/09/21 : engebret : Created with minimal EPOW and HW exception support. + * End Change Activity + */ + +#include <linux/errno.h> +#include <linux/threads.h> +#include <linux/kernel_stat.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/random.h> +#include <linux/sysrq.h> +#include <linux/bitops.h> + +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/irq.h> +#include <asm/cache.h> +#include <asm/prom.h> +#include <asm/ptrace.h> +#include <asm/machdep.h> +#include <asm/rtas.h> +#include <asm/ppcdebug.h> + +static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; +static DEFINE_SPINLOCK(ras_log_buf_lock); + +char mce_data_buf[RTAS_ERROR_LOG_MAX] +; +/* This is true if we are using the firmware NMI handler (typically LPAR) */ +extern int fwnmi_active; + +static int ras_get_sensor_state_token; +static int ras_check_exception_token; + +#define EPOW_SENSOR_TOKEN 9 +#define EPOW_SENSOR_INDEX 0 +#define RAS_VECTOR_OFFSET 0x500 + +static irqreturn_t ras_epow_interrupt(int irq, void *dev_id, + struct pt_regs * regs); +static irqreturn_t ras_error_interrupt(int irq, void *dev_id, + struct pt_regs * regs); + +/* #define DEBUG */ + +static void request_ras_irqs(struct device_node *np, char *propname, + irqreturn_t (*handler)(int, void *, struct pt_regs *), + const char *name) +{ + unsigned int *ireg, len, i; + int virq, n_intr; + + ireg = (unsigned int *)get_property(np, propname, &len); + if (ireg == NULL) + return; + n_intr = prom_n_intr_cells(np); + len /= n_intr * sizeof(*ireg); + + for (i = 0; i < len; i++) { + virq = virt_irq_create_mapping(*ireg); + if (virq == NO_IRQ) { + printk(KERN_ERR "Unable to allocate interrupt " + "number for %s\n", np->full_name); + return; + } + if (request_irq(irq_offset_up(virq), handler, 0, name, NULL)) { + printk(KERN_ERR "Unable to request interrupt %d for " + "%s\n", irq_offset_up(virq), np->full_name); + return; + } + ireg += n_intr; + } +} + +/* + * Initialize handlers for the set of interrupts caused by hardware errors + * and power system events. + */ +static int __init init_ras_IRQ(void) +{ + struct device_node *np; + + ras_get_sensor_state_token = rtas_token("get-sensor-state"); + ras_check_exception_token = rtas_token("check-exception"); + + /* Internal Errors */ + np = of_find_node_by_path("/event-sources/internal-errors"); + if (np != NULL) { + request_ras_irqs(np, "open-pic-interrupt", ras_error_interrupt, + "RAS_ERROR"); + request_ras_irqs(np, "interrupts", ras_error_interrupt, + "RAS_ERROR"); + of_node_put(np); + } + + /* EPOW Events */ + np = of_find_node_by_path("/event-sources/epow-events"); + if (np != NULL) { + request_ras_irqs(np, "open-pic-interrupt", ras_epow_interrupt, + "RAS_EPOW"); + request_ras_irqs(np, "interrupts", ras_epow_interrupt, + "RAS_EPOW"); + of_node_put(np); + } + + return 1; +} +__initcall(init_ras_IRQ); + +/* + * Handle power subsystem events (EPOW). + * + * Presently we just log the event has occurred. This should be fixed + * to examine the type of power failure and take appropriate action where + * the time horizon permits something useful to be done. + */ +static irqreturn_t +ras_epow_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + int status = 0xdeadbeef; + int state = 0; + int critical; + + status = rtas_call(ras_get_sensor_state_token, 2, 2, &state, + EPOW_SENSOR_TOKEN, EPOW_SENSOR_INDEX); + + if (state > 3) + critical = 1; /* Time Critical */ + else + critical = 0; + + spin_lock(&ras_log_buf_lock); + + status = rtas_call(ras_check_exception_token, 6, 1, NULL, + RAS_VECTOR_OFFSET, + virt_irq_to_real(irq_offset_down(irq)), + RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS, + critical, __pa(&ras_log_buf), + rtas_get_error_log_max()); + + udbg_printf("EPOW <0x%lx 0x%x 0x%x>\n", + *((unsigned long *)&ras_log_buf), status, state); + printk(KERN_WARNING "EPOW <0x%lx 0x%x 0x%x>\n", + *((unsigned long *)&ras_log_buf), status, state); + + /* format and print the extended information */ + log_error(ras_log_buf, ERR_TYPE_RTAS_LOG, 0); + + spin_unlock(&ras_log_buf_lock); + return IRQ_HANDLED; +} + +/* + * Handle hardware error interrupts. + * + * RTAS check-exception is called to collect data on the exception. If + * the error is deemed recoverable, we log a warning and return. + * For nonrecoverable errors, an error is logged and we stop all processing + * as quickly as possible in order to prevent propagation of the failure. + */ +static irqreturn_t +ras_error_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct rtas_error_log *rtas_elog; + int status = 0xdeadbeef; + int fatal; + + spin_lock(&ras_log_buf_lock); + + status = rtas_call(ras_check_exception_token, 6, 1, NULL, + RAS_VECTOR_OFFSET, + virt_irq_to_real(irq_offset_down(irq)), + RTAS_INTERNAL_ERROR, 1 /*Time Critical */, + __pa(&ras_log_buf), + rtas_get_error_log_max()); + + rtas_elog = (struct rtas_error_log *)ras_log_buf; + + if ((status == 0) && (rtas_elog->severity >= RTAS_SEVERITY_ERROR_SYNC)) + fatal = 1; + else + fatal = 0; + + /* format and print the extended information */ + log_error(ras_log_buf, ERR_TYPE_RTAS_LOG, fatal); + + if (fatal) { + udbg_printf("Fatal HW Error <0x%lx 0x%x>\n", + *((unsigned long *)&ras_log_buf), status); + printk(KERN_EMERG "Error: Fatal hardware error <0x%lx 0x%x>\n", + *((unsigned long *)&ras_log_buf), status); + +#ifndef DEBUG + /* Don't actually power off when debugging so we can test + * without actually failing while injecting errors. + * Error data will not be logged to syslog. + */ + ppc_md.power_off(); +#endif + } else { + udbg_printf("Recoverable HW Error <0x%lx 0x%x>\n", + *((unsigned long *)&ras_log_buf), status); + printk(KERN_WARNING + "Warning: Recoverable hardware error <0x%lx 0x%x>\n", + *((unsigned long *)&ras_log_buf), status); + } + + spin_unlock(&ras_log_buf_lock); + return IRQ_HANDLED; +} + +/* Get the error information for errors coming through the + * FWNMI vectors. The pt_regs' r3 will be updated to reflect + * the actual r3 if possible, and a ptr to the error log entry + * will be returned if found. + * + * The mce_data_buf does not have any locks or protection around it, + * if a second machine check comes in, or a system reset is done + * before we have logged the error, then we will get corruption in the + * error log. This is preferable over holding off on calling + * ibm,nmi-interlock which would result in us checkstopping if a + * second machine check did come in. + */ +static struct rtas_error_log *fwnmi_get_errinfo(struct pt_regs *regs) +{ + unsigned long errdata = regs->gpr[3]; + struct rtas_error_log *errhdr = NULL; + unsigned long *savep; + + if ((errdata >= 0x7000 && errdata < 0x7fff0) || + (errdata >= rtas.base && errdata < rtas.base + rtas.size - 16)) { + savep = __va(errdata); + regs->gpr[3] = savep[0]; /* restore original r3 */ + memset(mce_data_buf, 0, RTAS_ERROR_LOG_MAX); + memcpy(mce_data_buf, (char *)(savep + 1), RTAS_ERROR_LOG_MAX); + errhdr = (struct rtas_error_log *)mce_data_buf; + } else { + printk("FWNMI: corrupt r3\n"); + } + return errhdr; +} + +/* Call this when done with the data returned by FWNMI_get_errinfo. + * It will release the saved data area for other CPUs in the + * partition to receive FWNMI errors. + */ +static void fwnmi_release_errinfo(void) +{ + int ret = rtas_call(rtas_token("ibm,nmi-interlock"), 0, 1, NULL); + if (ret != 0) + printk("FWNMI: nmi-interlock failed: %d\n", ret); +} + +void pSeries_system_reset_exception(struct pt_regs *regs) +{ + if (fwnmi_active) { + struct rtas_error_log *errhdr = fwnmi_get_errinfo(regs); + if (errhdr) { + /* XXX Should look at FWNMI information */ + } + fwnmi_release_errinfo(); + } +} + +/* + * See if we can recover from a machine check exception. + * This is only called on power4 (or above) and only via + * the Firmware Non-Maskable Interrupts (fwnmi) handler + * which provides the error analysis for us. + * + * Return 1 if corrected (or delivered a signal). + * Return 0 if there is nothing we can do. + */ +static int recover_mce(struct pt_regs *regs, struct rtas_error_log * err) +{ + int nonfatal = 0; + + if (err->disposition == RTAS_DISP_FULLY_RECOVERED) { + /* Platform corrected itself */ + nonfatal = 1; + } else if ((regs->msr & MSR_RI) && + user_mode(regs) && + err->severity == RTAS_SEVERITY_ERROR_SYNC && + err->disposition == RTAS_DISP_NOT_RECOVERED && + err->target == RTAS_TARGET_MEMORY && + err->type == RTAS_TYPE_ECC_UNCORR && + !(current->pid == 0 || current->pid == 1)) { + /* Kill off a user process with an ECC error */ + printk(KERN_ERR "MCE: uncorrectable ecc error for pid %d\n", + current->pid); + /* XXX something better for ECC error? */ + _exception(SIGBUS, regs, BUS_ADRERR, regs->nip); + nonfatal = 1; + } + + log_error((char *)err, ERR_TYPE_RTAS_LOG, !nonfatal); + + return nonfatal; +} + +/* + * Handle a machine check. + * + * Note that on Power 4 and beyond Firmware Non-Maskable Interrupts (fwnmi) + * should be present. If so the handler which called us tells us if the + * error was recovered (never true if RI=0). + * + * On hardware prior to Power 4 these exceptions were asynchronous which + * means we can't tell exactly where it occurred and so we can't recover. + */ +int pSeries_machine_check_exception(struct pt_regs *regs) +{ + struct rtas_error_log *errp; + + if (fwnmi_active) { + errp = fwnmi_get_errinfo(regs); + fwnmi_release_errinfo(); + if (errp && recover_mce(regs, errp)) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c new file mode 100644 index 00000000000..58c61219d08 --- /dev/null +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -0,0 +1,426 @@ +/* + * pSeries_reconfig.c - support for dynamic reconfiguration (including PCI + * Hotplug and Dynamic Logical Partitioning on RPA platforms). + * + * Copyright (C) 2005 Nathan Lynch + * Copyright (C) 2005 IBM Corporation + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/kref.h> +#include <linux/notifier.h> +#include <linux/proc_fs.h> + +#include <asm/prom.h> +#include <asm/pSeries_reconfig.h> +#include <asm/uaccess.h> + + + +/* + * Routines for "runtime" addition and removal of device tree nodes. + */ +#ifdef CONFIG_PROC_DEVICETREE +/* + * Add a node to /proc/device-tree. + */ +static void add_node_proc_entries(struct device_node *np) +{ + struct proc_dir_entry *ent; + + ent = proc_mkdir(strrchr(np->full_name, '/') + 1, np->parent->pde); + if (ent) + proc_device_tree_add_node(np, ent); +} + +static void remove_node_proc_entries(struct device_node *np) +{ + struct property *pp = np->properties; + struct device_node *parent = np->parent; + + while (pp) { + remove_proc_entry(pp->name, np->pde); + pp = pp->next; + } + if (np->pde) + remove_proc_entry(np->pde->name, parent->pde); +} +#else /* !CONFIG_PROC_DEVICETREE */ +static void add_node_proc_entries(struct device_node *np) +{ + return; +} + +static void remove_node_proc_entries(struct device_node *np) +{ + return; +} +#endif /* CONFIG_PROC_DEVICETREE */ + +/** + * derive_parent - basically like dirname(1) + * @path: the full_name of a node to be added to the tree + * + * Returns the node which should be the parent of the node + * described by path. E.g., for path = "/foo/bar", returns + * the node with full_name = "/foo". + */ +static struct device_node *derive_parent(const char *path) +{ + struct device_node *parent = NULL; + char *parent_path = "/"; + size_t parent_path_len = strrchr(path, '/') - path + 1; + + /* reject if path is "/" */ + if (!strcmp(path, "/")) + return ERR_PTR(-EINVAL); + + if (strrchr(path, '/') != path) { + parent_path = kmalloc(parent_path_len, GFP_KERNEL); + if (!parent_path) + return ERR_PTR(-ENOMEM); + strlcpy(parent_path, path, parent_path_len); + } + parent = of_find_node_by_path(parent_path); + if (!parent) + return ERR_PTR(-EINVAL); + if (strcmp(parent_path, "/")) + kfree(parent_path); + return parent; +} + +static struct notifier_block *pSeries_reconfig_chain; + +int pSeries_reconfig_notifier_register(struct notifier_block *nb) +{ + return notifier_chain_register(&pSeries_reconfig_chain, nb); +} + +void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) +{ + notifier_chain_unregister(&pSeries_reconfig_chain, nb); +} + +static int pSeries_reconfig_add_node(const char *path, struct property *proplist) +{ + struct device_node *np; + int err = -ENOMEM; + + np = kzalloc(sizeof(*np), GFP_KERNEL); + if (!np) + goto out_err; + + np->full_name = kmalloc(strlen(path) + 1, GFP_KERNEL); + if (!np->full_name) + goto out_err; + + strcpy(np->full_name, path); + + np->properties = proplist; + OF_MARK_DYNAMIC(np); + kref_init(&np->kref); + + np->parent = derive_parent(path); + if (IS_ERR(np->parent)) { + err = PTR_ERR(np->parent); + goto out_err; + } + + err = notifier_call_chain(&pSeries_reconfig_chain, + PSERIES_RECONFIG_ADD, np); + if (err == NOTIFY_BAD) { + printk(KERN_ERR "Failed to add device node %s\n", path); + err = -ENOMEM; /* For now, safe to assume kmalloc failure */ + goto out_err; + } + + of_attach_node(np); + + add_node_proc_entries(np); + + of_node_put(np->parent); + + return 0; + +out_err: + if (np) { + of_node_put(np->parent); + kfree(np->full_name); + kfree(np); + } + return err; +} + +static int pSeries_reconfig_remove_node(struct device_node *np) +{ + struct device_node *parent, *child; + + parent = of_get_parent(np); + if (!parent) + return -EINVAL; + + if ((child = of_get_next_child(np, NULL))) { + of_node_put(child); + return -EBUSY; + } + + remove_node_proc_entries(np); + + notifier_call_chain(&pSeries_reconfig_chain, + PSERIES_RECONFIG_REMOVE, np); + of_detach_node(np); + + of_node_put(parent); + of_node_put(np); /* Must decrement the refcount */ + return 0; +} + +/* + * /proc/ppc64/ofdt - yucky binary interface for adding and removing + * OF device nodes. Should be deprecated as soon as we get an + * in-kernel wrapper for the RTAS ibm,configure-connector call. + */ + +static void release_prop_list(const struct property *prop) +{ + struct property *next; + for (; prop; prop = next) { + next = prop->next; + kfree(prop->name); + kfree(prop->value); + kfree(prop); + } + +} + +/** + * parse_next_property - process the next property from raw input buffer + * @buf: input buffer, must be nul-terminated + * @end: end of the input buffer + 1, for validation + * @name: return value; set to property name in buf + * @length: return value; set to length of value + * @value: return value; set to the property value in buf + * + * Note that the caller must make copies of the name and value returned, + * this function does no allocation or copying of the data. Return value + * is set to the next name in buf, or NULL on error. + */ +static char * parse_next_property(char *buf, char *end, char **name, int *length, + unsigned char **value) +{ + char *tmp; + + *name = buf; + + tmp = strchr(buf, ' '); + if (!tmp) { + printk(KERN_ERR "property parse failed in %s at line %d\n", + __FUNCTION__, __LINE__); + return NULL; + } + *tmp = '\0'; + + if (++tmp >= end) { + printk(KERN_ERR "property parse failed in %s at line %d\n", + __FUNCTION__, __LINE__); + return NULL; + } + + /* now we're on the length */ + *length = -1; + *length = simple_strtoul(tmp, &tmp, 10); + if (*length == -1) { + printk(KERN_ERR "property parse failed in %s at line %d\n", + __FUNCTION__, __LINE__); + return NULL; + } + if (*tmp != ' ' || ++tmp >= end) { + printk(KERN_ERR "property parse failed in %s at line %d\n", + __FUNCTION__, __LINE__); + return NULL; + } + + /* now we're on the value */ + *value = tmp; + tmp += *length; + if (tmp > end) { + printk(KERN_ERR "property parse failed in %s at line %d\n", + __FUNCTION__, __LINE__); + return NULL; + } + else if (tmp < end && *tmp != ' ' && *tmp != '\0') { + printk(KERN_ERR "property parse failed in %s at line %d\n", + __FUNCTION__, __LINE__); + return NULL; + } + tmp++; + + /* and now we should be on the next name, or the end */ + return tmp; +} + +static struct property *new_property(const char *name, const int length, + const unsigned char *value, struct property *last) +{ + struct property *new = kmalloc(sizeof(*new), GFP_KERNEL); + + if (!new) + return NULL; + memset(new, 0, sizeof(*new)); + + if (!(new->name = kmalloc(strlen(name) + 1, GFP_KERNEL))) + goto cleanup; + if (!(new->value = kmalloc(length + 1, GFP_KERNEL))) + goto cleanup; + + strcpy(new->name, name); + memcpy(new->value, value, length); + *(((char *)new->value) + length) = 0; + new->length = length; + new->next = last; + return new; + +cleanup: + if (new->name) + kfree(new->name); + if (new->value) + kfree(new->value); + kfree(new); + return NULL; +} + +static int do_add_node(char *buf, size_t bufsize) +{ + char *path, *end, *name; + struct device_node *np; + struct property *prop = NULL; + unsigned char* value; + int length, rv = 0; + + end = buf + bufsize; + path = buf; + buf = strchr(buf, ' '); + if (!buf) + return -EINVAL; + *buf = '\0'; + buf++; + + if ((np = of_find_node_by_path(path))) { + of_node_put(np); + return -EINVAL; + } + + /* rv = build_prop_list(tmp, bufsize - (tmp - buf), &proplist); */ + while (buf < end && + (buf = parse_next_property(buf, end, &name, &length, &value))) { + struct property *last = prop; + + prop = new_property(name, length, value, last); + if (!prop) { + rv = -ENOMEM; + prop = last; + goto out; + } + } + if (!buf) { + rv = -EINVAL; + goto out; + } + + rv = pSeries_reconfig_add_node(path, prop); + +out: + if (rv) + release_prop_list(prop); + return rv; +} + +static int do_remove_node(char *buf) +{ + struct device_node *node; + int rv = -ENODEV; + + if ((node = of_find_node_by_path(buf))) + rv = pSeries_reconfig_remove_node(node); + + of_node_put(node); + return rv; +} + +/** + * ofdt_write - perform operations on the Open Firmware device tree + * + * @file: not used + * @buf: command and arguments + * @count: size of the command buffer + * @off: not used + * + * Operations supported at this time are addition and removal of + * whole nodes along with their properties. Operations on individual + * properties are not implemented (yet). + */ +static ssize_t ofdt_write(struct file *file, const char __user *buf, size_t count, + loff_t *off) +{ + int rv = 0; + char *kbuf; + char *tmp; + + if (!(kbuf = kmalloc(count + 1, GFP_KERNEL))) { + rv = -ENOMEM; + goto out; + } + if (copy_from_user(kbuf, buf, count)) { + rv = -EFAULT; + goto out; + } + + kbuf[count] = '\0'; + + tmp = strchr(kbuf, ' '); + if (!tmp) { + rv = -EINVAL; + goto out; + } + *tmp = '\0'; + tmp++; + + if (!strcmp(kbuf, "add_node")) + rv = do_add_node(tmp, count - (tmp - kbuf)); + else if (!strcmp(kbuf, "remove_node")) + rv = do_remove_node(tmp); + else + rv = -EINVAL; +out: + kfree(kbuf); + return rv ? rv : count; +} + +static struct file_operations ofdt_fops = { + .write = ofdt_write +}; + +/* create /proc/ppc64/ofdt write-only by root */ +static int proc_ppc64_create_ofdt(void) +{ + struct proc_dir_entry *ent; + + if (!(systemcfg->platform & PLATFORM_PSERIES)) + return 0; + + ent = create_proc_entry("ppc64/ofdt", S_IWUSR, NULL); + if (ent) { + ent->nlink = 1; + ent->data = NULL; + ent->size = 0; + ent->proc_fops = &ofdt_fops; + } + + return 0; +} +__initcall(proc_ppc64_create_ofdt); diff --git a/arch/powerpc/platforms/pseries/rtas-fw.c b/arch/powerpc/platforms/pseries/rtas-fw.c new file mode 100644 index 00000000000..15d81d758ca --- /dev/null +++ b/arch/powerpc/platforms/pseries/rtas-fw.c @@ -0,0 +1,138 @@ +/* + * + * Procedures for firmware flash updates on pSeries systems. + * + * Peter Bergner, IBM March 2001. + * Copyright (C) 2001 IBM. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <stdarg.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/semaphore.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/param.h> +#include <asm/system.h> +#include <asm/abs_addr.h> +#include <asm/udbg.h> +#include <asm/delay.h> +#include <asm/uaccess.h> +#include <asm/systemcfg.h> + +#include "rtas-fw.h" + +struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; + +#define FLASH_BLOCK_LIST_VERSION (1UL) + +static void rtas_flash_firmware(void) +{ + unsigned long image_size; + struct flash_block_list *f, *next, *flist; + unsigned long rtas_block_list; + int i, status, update_token; + + update_token = rtas_token("ibm,update-flash-64-and-reboot"); + if (update_token == RTAS_UNKNOWN_SERVICE) { + printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n"); + printk(KERN_ALERT "FLASH: firmware will not be flashed\n"); + return; + } + + /* NOTE: the "first" block list is a global var with no data + * blocks in the kernel data segment. We do this because + * we want to ensure this block_list addr is under 4GB. + */ + rtas_firmware_flash_list.num_blocks = 0; + flist = (struct flash_block_list *)&rtas_firmware_flash_list; + rtas_block_list = virt_to_abs(flist); + if (rtas_block_list >= 4UL*1024*1024*1024) { + printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n"); + return; + } + + printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n"); + /* Update the block_list in place. */ + image_size = 0; + for (f = flist; f; f = next) { + /* Translate data addrs to absolute */ + for (i = 0; i < f->num_blocks; i++) { + f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data); + image_size += f->blocks[i].length; + } + next = f->next; + /* Don't translate NULL pointer for last entry */ + if (f->next) + f->next = (struct flash_block_list *)virt_to_abs(f->next); + else + f->next = NULL; + /* make num_blocks into the version/length field */ + f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16); + } + + printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size); + printk(KERN_ALERT "FLASH: performing flash and reboot\n"); + rtas_progress("Flashing \n", 0x0); + rtas_progress("Please Wait... ", 0x0); + printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n"); + status = rtas_call(update_token, 1, 1, NULL, rtas_block_list); + switch (status) { /* should only get "bad" status */ + case 0: + printk(KERN_ALERT "FLASH: success\n"); + break; + case -1: + printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n"); + break; + case -3: + printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n"); + break; + case -4: + printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n"); + break; + default: + printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status); + break; + } +} + +void rtas_flash_bypass_warning(void) +{ + printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n"); + printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n"); +} + + +void rtas_fw_restart(char *cmd) +{ + if (rtas_firmware_flash_list.next) + rtas_flash_firmware(); + rtas_restart(cmd); +} + +void rtas_fw_power_off(void) +{ + if (rtas_firmware_flash_list.next) + rtas_flash_bypass_warning(); + rtas_power_off(); +} + +void rtas_fw_halt(void) +{ + if (rtas_firmware_flash_list.next) + rtas_flash_bypass_warning(); + rtas_halt(); +} + +EXPORT_SYMBOL(rtas_firmware_flash_list); diff --git a/arch/powerpc/platforms/pseries/rtas-fw.h b/arch/powerpc/platforms/pseries/rtas-fw.h new file mode 100644 index 00000000000..e70fa69974a --- /dev/null +++ b/arch/powerpc/platforms/pseries/rtas-fw.h @@ -0,0 +1,3 @@ +void rtas_fw_restart(char *cmd); +void rtas_fw_power_off(void); +void rtas_fw_halt(void); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c new file mode 100644 index 00000000000..10cb0f2d9b5 --- /dev/null +++ b/arch/powerpc/platforms/pseries/setup.c @@ -0,0 +1,607 @@ +/* + * 64-bit pSeries and RS/6000 setup code. + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* + * bootup setup stuff.. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/tty.h> +#include <linux/major.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/console.h> +#include <linux/pci.h> +#include <linux/utsname.h> +#include <linux/adb.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> + +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/dma.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/time.h> +#include <asm/nvram.h> +#include <asm/plpar_wrappers.h> +#include "xics.h" +#include <asm/firmware.h> +#include <asm/pmc.h> +#include <asm/mpic.h> +#include <asm/ppc-pci.h> +#include <asm/i8259.h> +#include <asm/udbg.h> + +#include "rtas-fw.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +extern void find_udbg_vterm(void); +extern void system_reset_fwnmi(void); /* from head.S */ +extern void machine_check_fwnmi(void); /* from head.S */ +extern void generic_find_legacy_serial_ports(u64 *physport, + unsigned int *default_speed); + +int fwnmi_active; /* TRUE if an FWNMI handler is present */ + +extern void pSeries_system_reset_exception(struct pt_regs *regs); +extern int pSeries_machine_check_exception(struct pt_regs *regs); + +static void pseries_shared_idle(void); +static void pseries_dedicated_idle(void); + +struct mpic *pSeries_mpic; + +void pSeries_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: CHRP %s\n", model); + of_node_put(root); +} + +/* Initialize firmware assisted non-maskable interrupts if + * the firmware supports this feature. + * + */ +static void __init fwnmi_init(void) +{ + int ret; + int ibm_nmi_register = rtas_token("ibm,nmi-register"); + if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE) + return; + ret = rtas_call(ibm_nmi_register, 2, 1, NULL, + __pa((unsigned long)system_reset_fwnmi), + __pa((unsigned long)machine_check_fwnmi)); + if (ret == 0) + fwnmi_active = 1; +} + +static void __init pSeries_init_mpic(void) +{ + unsigned int *addrp; + struct device_node *np; + unsigned long intack = 0; + + /* All ISUs are setup, complete initialization */ + mpic_init(pSeries_mpic); + + /* Check what kind of cascade ACK we have */ + if (!(np = of_find_node_by_name(NULL, "pci")) + || !(addrp = (unsigned int *) + get_property(np, "8259-interrupt-acknowledge", NULL))) + printk(KERN_ERR "Cannot find pci to get ack address\n"); + else + intack = addrp[prom_n_addr_cells(np)-1]; + of_node_put(np); + + /* Setup the legacy interrupts & controller */ + i8259_init(intack, 0); + + /* Hook cascade to mpic */ + mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL); +} + +static void __init pSeries_setup_mpic(void) +{ + unsigned int *opprop; + unsigned long openpic_addr = 0; + unsigned char senses[NR_IRQS - NUM_ISA_INTERRUPTS]; + struct device_node *root; + int irq_count; + + /* Find the Open PIC if present */ + root = of_find_node_by_path("/"); + opprop = (unsigned int *) get_property(root, "platform-open-pic", NULL); + if (opprop != 0) { + int n = prom_n_addr_cells(root); + + for (openpic_addr = 0; n > 0; --n) + openpic_addr = (openpic_addr << 32) + *opprop++; + printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); + } + of_node_put(root); + + BUG_ON(openpic_addr == 0); + + /* Get the sense values from OF */ + prom_get_irq_senses(senses, NUM_ISA_INTERRUPTS, NR_IRQS); + + /* Setup the openpic driver */ + irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ + pSeries_mpic = mpic_alloc(openpic_addr, MPIC_PRIMARY, + 16, 16, irq_count, /* isu size, irq offset, irq count */ + NR_IRQS - 4, /* ipi offset */ + senses, irq_count, /* sense & sense size */ + " MPIC "); +} + +static void pseries_lpar_enable_pmcs(void) +{ + unsigned long set, reset; + + power4_enable_pmcs(); + + set = 1UL << 63; + reset = 0; + plpar_hcall_norets(H_PERFMON, set, reset); + + /* instruct hypervisor to maintain PMCs */ + if (firmware_has_feature(FW_FEATURE_SPLPAR)) + get_paca()->lppaca.pmcregs_in_use = 1; +} + +static void __init pSeries_setup_arch(void) +{ + /* Fixup ppc_md depending on the type of interrupt controller */ + if (ppc64_interrupt_controller == IC_OPEN_PIC) { + ppc_md.init_IRQ = pSeries_init_mpic; + ppc_md.get_irq = mpic_get_irq; + ppc_md.cpu_irq_down = mpic_teardown_this_cpu; + /* Allocate the mpic now, so that find_and_init_phbs() can + * fill the ISUs */ + pSeries_setup_mpic(); + } else { + ppc_md.init_IRQ = xics_init_IRQ; + ppc_md.get_irq = xics_get_irq; + ppc_md.cpu_irq_down = xics_teardown_cpu; + } + +#ifdef CONFIG_SMP + smp_init_pSeries(); +#endif + /* openpic global configuration register (64-bit format). */ + /* openpic Interrupt Source Unit pointer (64-bit format). */ + /* python0 facility area (mmio) (64-bit format) REAL address. */ + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + if (ROOT_DEV == 0) { + printk("No ramdisk, default root is /dev/sda2\n"); + ROOT_DEV = Root_SDA2; + } + + fwnmi_init(); + + /* Find and initialize PCI host bridges */ + init_pci_config_tokens(); + find_and_init_phbs(); + eeh_init(); + + pSeries_nvram_init(); + + /* Choose an idle loop */ + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { + vpa_init(boot_cpuid); + if (get_paca()->lppaca.shared_proc) { + printk(KERN_INFO "Using shared processor idle loop\n"); + ppc_md.idle_loop = pseries_shared_idle; + } else { + printk(KERN_INFO "Using dedicated idle loop\n"); + ppc_md.idle_loop = pseries_dedicated_idle; + } + } else { + printk(KERN_INFO "Using default idle loop\n"); + ppc_md.idle_loop = default_idle; + } + + if (systemcfg->platform & PLATFORM_LPAR) + ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; + else + ppc_md.enable_pmcs = power4_enable_pmcs; +} + +static int __init pSeries_init_panel(void) +{ + /* Manually leave the kernel version on the panel. */ + ppc_md.progress("Linux ppc64\n", 0); + ppc_md.progress(system_utsname.version, 0); + + return 0; +} +arch_initcall(pSeries_init_panel); + + +/* Build up the ppc64_firmware_features bitmask field + * using contents of device-tree/ibm,hypertas-functions. + * Ultimately this functionality may be moved into prom.c prom_init(). + */ +static void __init fw_feature_init(void) +{ + struct device_node * dn; + char * hypertas; + unsigned int len; + + DBG(" -> fw_feature_init()\n"); + + ppc64_firmware_features = 0; + dn = of_find_node_by_path("/rtas"); + if (dn == NULL) { + printk(KERN_ERR "WARNING ! Cannot find RTAS in device-tree !\n"); + goto no_rtas; + } + + hypertas = get_property(dn, "ibm,hypertas-functions", &len); + if (hypertas) { + while (len > 0){ + int i, hypertas_len; + /* check value against table of strings */ + for(i=0; i < FIRMWARE_MAX_FEATURES ;i++) { + if ((firmware_features_table[i].name) && + (strcmp(firmware_features_table[i].name,hypertas))==0) { + /* we have a match */ + ppc64_firmware_features |= + (firmware_features_table[i].val); + break; + } + } + hypertas_len = strlen(hypertas); + len -= hypertas_len +1; + hypertas+= hypertas_len +1; + } + } + + of_node_put(dn); + no_rtas: + printk(KERN_INFO "firmware_features = 0x%lx\n", + ppc64_firmware_features); + + DBG(" <- fw_feature_init()\n"); +} + + +static void __init pSeries_discover_pic(void) +{ + struct device_node *np; + char *typep; + + /* + * Setup interrupt mapping options that are needed for finish_device_tree + * to properly parse the OF interrupt tree & do the virtual irq mapping + */ + __irq_offset_value = NUM_ISA_INTERRUPTS; + ppc64_interrupt_controller = IC_INVALID; + for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) { + typep = (char *)get_property(np, "compatible", NULL); + if (strstr(typep, "open-pic")) + ppc64_interrupt_controller = IC_OPEN_PIC; + else if (strstr(typep, "ppc-xicp")) + ppc64_interrupt_controller = IC_PPC_XIC; + else + printk("pSeries_discover_pic: failed to recognize" + " interrupt-controller\n"); + break; + } +} + +static void pSeries_mach_cpu_die(void) +{ + local_irq_disable(); + idle_task_exit(); + /* Some hardware requires clearing the CPPR, while other hardware does not + * it is safe either way + */ + pSeriesLP_cppr_info(0, 0); + rtas_stop_self(); + /* Should never get here... */ + BUG(); + for(;;); +} + + +/* + * Early initialization. Relocation is on but do not reference unbolted pages + */ +static void __init pSeries_init_early(void) +{ + void *comport; + int iommu_off = 0; + unsigned int default_speed; + u64 physport; + + DBG(" -> pSeries_init_early()\n"); + + fw_feature_init(); + + if (systemcfg->platform & PLATFORM_LPAR) + hpte_init_lpar(); + else { + hpte_init_native(); + iommu_off = (of_chosen && + get_property(of_chosen, "linux,iommu-off", NULL)); + } + + generic_find_legacy_serial_ports(&physport, &default_speed); + + if (systemcfg->platform & PLATFORM_LPAR) + find_udbg_vterm(); + else if (physport) { + /* Map the uart for udbg. */ + comport = (void *)ioremap(physport, 16); + udbg_init_uart(comport, default_speed); + + DBG("Hello World !\n"); + } + + + iommu_init_early_pSeries(); + + pSeries_discover_pic(); + + DBG(" <- pSeries_init_early()\n"); +} + + +static int pSeries_check_legacy_ioport(unsigned int baseport) +{ + struct device_node *np; + +#define I8042_DATA_REG 0x60 +#define FDC_BASE 0x3f0 + + + switch(baseport) { + case I8042_DATA_REG: + np = of_find_node_by_type(NULL, "8042"); + if (np == NULL) + return -ENODEV; + of_node_put(np); + break; + case FDC_BASE: + np = of_find_node_by_type(NULL, "fdc"); + if (np == NULL) + return -ENODEV; + of_node_put(np); + break; + } + return 0; +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +extern struct machdep_calls pSeries_md; + +static int __init pSeries_probe(int platform) +{ + if (platform != PLATFORM_PSERIES && + platform != PLATFORM_PSERIES_LPAR) + return 0; + + /* if we have some ppc_md fixups for LPAR to do, do + * it here ... + */ + + return 1; +} + +DECLARE_PER_CPU(unsigned long, smt_snooze_delay); + +static inline void dedicated_idle_sleep(unsigned int cpu) +{ + struct paca_struct *ppaca = &paca[cpu ^ 1]; + + /* Only sleep if the other thread is not idle */ + if (!(ppaca->lppaca.idle)) { + local_irq_disable(); + + /* + * We are about to sleep the thread and so wont be polling any + * more. + */ + clear_thread_flag(TIF_POLLING_NRFLAG); + + /* + * SMT dynamic mode. Cede will result in this thread going + * dormant, if the partner thread is still doing work. Thread + * wakes up if partner goes idle, an interrupt is presented, or + * a prod occurs. Returning from the cede enables external + * interrupts. + */ + if (!need_resched()) + cede_processor(); + else + local_irq_enable(); + } else { + /* + * Give the HV an opportunity at the processor, since we are + * not doing any work. + */ + poll_pending(); + } +} + +static void pseries_dedicated_idle(void) +{ + long oldval; + struct paca_struct *lpaca = get_paca(); + unsigned int cpu = smp_processor_id(); + unsigned long start_snooze; + unsigned long *smt_snooze_delay = &__get_cpu_var(smt_snooze_delay); + + while (1) { + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + lpaca->lppaca.idle = 1; + + oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); + if (!oldval) { + set_thread_flag(TIF_POLLING_NRFLAG); + + start_snooze = __get_tb() + + *smt_snooze_delay * tb_ticks_per_usec; + + while (!need_resched() && !cpu_is_offline(cpu)) { + ppc64_runlatch_off(); + + /* + * Go into low thread priority and possibly + * low power mode. + */ + HMT_low(); + HMT_very_low(); + + if (*smt_snooze_delay != 0 && + __get_tb() > start_snooze) { + HMT_medium(); + dedicated_idle_sleep(cpu); + } + + } + + HMT_medium(); + clear_thread_flag(TIF_POLLING_NRFLAG); + } else { + set_need_resched(); + } + + lpaca->lppaca.idle = 0; + ppc64_runlatch_on(); + + schedule(); + + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); + } +} + +static void pseries_shared_idle(void) +{ + struct paca_struct *lpaca = get_paca(); + unsigned int cpu = smp_processor_id(); + + while (1) { + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + lpaca->lppaca.idle = 1; + + while (!need_resched() && !cpu_is_offline(cpu)) { + local_irq_disable(); + ppc64_runlatch_off(); + + /* + * Yield the processor to the hypervisor. We return if + * an external interrupt occurs (which are driven prior + * to returning here) or if a prod occurs from another + * processor. When returning here, external interrupts + * are enabled. + * + * Check need_resched() again with interrupts disabled + * to avoid a race. + */ + if (!need_resched()) + cede_processor(); + else + local_irq_enable(); + + HMT_medium(); + } + + lpaca->lppaca.idle = 0; + ppc64_runlatch_on(); + + schedule(); + + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); + } +} + +static int pSeries_pci_probe_mode(struct pci_bus *bus) +{ + if (systemcfg->platform & PLATFORM_LPAR) + return PCI_PROBE_DEVTREE; + return PCI_PROBE_NORMAL; +} + +struct machdep_calls __initdata pSeries_md = { + .probe = pSeries_probe, + .setup_arch = pSeries_setup_arch, + .init_early = pSeries_init_early, + .show_cpuinfo = pSeries_show_cpuinfo, + .log_error = pSeries_log_error, + .pcibios_fixup = pSeries_final_fixup, + .pci_probe_mode = pSeries_pci_probe_mode, + .irq_bus_setup = pSeries_irq_bus_setup, + .restart = rtas_fw_restart, + .power_off = rtas_fw_power_off, + .halt = rtas_fw_halt, + .panic = rtas_os_term, + .cpu_die = pSeries_mach_cpu_die, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = rtas_progress, + .check_legacy_ioport = pSeries_check_legacy_ioport, + .system_reset_exception = pSeries_system_reset_exception, + .machine_check_exception = pSeries_machine_check_exception, +}; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c new file mode 100644 index 00000000000..9c9458ddfc2 --- /dev/null +++ b/arch/powerpc/platforms/pseries/smp.c @@ -0,0 +1,471 @@ +/* + * SMP support for pSeries machines. + * + * Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com + * + * Plus various changes from other IBM teams... + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/cache.h> +#include <linux/err.h> +#include <linux/sysdev.h> +#include <linux/cpu.h> + +#include <asm/ptrace.h> +#include <asm/atomic.h> +#include <asm/irq.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/smp.h> +#include <asm/paca.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include "xics.h" +#include <asm/cputable.h> +#include <asm/firmware.h> +#include <asm/system.h> +#include <asm/rtas.h> +#include <asm/plpar_wrappers.h> +#include <asm/pSeries_reconfig.h> +#include <asm/mpic.h> + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* + * The primary thread of each non-boot processor is recorded here before + * smp init. + */ +static cpumask_t of_spin_map; + +extern void pSeries_secondary_smp_init(unsigned long); + +#ifdef CONFIG_HOTPLUG_CPU + +/* Get state of physical CPU. + * Return codes: + * 0 - The processor is in the RTAS stopped state + * 1 - stop-self is in progress + * 2 - The processor is not in the RTAS stopped state + * -1 - Hardware Error + * -2 - Hardware Busy, Try again later. + */ +static int query_cpu_stopped(unsigned int pcpu) +{ + int cpu_status; + int status, qcss_tok; + + qcss_tok = rtas_token("query-cpu-stopped-state"); + if (qcss_tok == RTAS_UNKNOWN_SERVICE) + return -1; + status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu); + if (status != 0) { + printk(KERN_ERR + "RTAS query-cpu-stopped-state failed: %i\n", status); + return status; + } + + return cpu_status; +} + +int pSeries_cpu_disable(void) +{ + int cpu = smp_processor_id(); + + cpu_clear(cpu, cpu_online_map); + systemcfg->processorCount--; + + /*fix boot_cpuid here*/ + if (cpu == boot_cpuid) + boot_cpuid = any_online_cpu(cpu_online_map); + + /* FIXME: abstract this to not be platform specific later on */ + xics_migrate_irqs_away(); + return 0; +} + +void pSeries_cpu_die(unsigned int cpu) +{ + int tries; + int cpu_status; + unsigned int pcpu = get_hard_smp_processor_id(cpu); + + for (tries = 0; tries < 25; tries++) { + cpu_status = query_cpu_stopped(pcpu); + if (cpu_status == 0 || cpu_status == -1) + break; + msleep(200); + } + if (cpu_status != 0) { + printk("Querying DEAD? cpu %i (%i) shows %i\n", + cpu, pcpu, cpu_status); + } + + /* Isolation and deallocation are definatly done by + * drslot_chrp_cpu. If they were not they would be + * done here. Change isolate state to Isolate and + * change allocation-state to Unusable. + */ + paca[cpu].cpu_start = 0; +} + +/* + * Update cpu_present_map and paca(s) for a new cpu node. The wrinkle + * here is that a cpu device node may represent up to two logical cpus + * in the SMT case. We must honor the assumption in other code that + * the logical ids for sibling SMT threads x and y are adjacent, such + * that x^1 == y and y^1 == x. + */ +static int pSeries_add_processor(struct device_node *np) +{ + unsigned int cpu; + cpumask_t candidate_map, tmp = CPU_MASK_NONE; + int err = -ENOSPC, len, nthreads, i; + u32 *intserv; + + intserv = (u32 *)get_property(np, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + return 0; + + nthreads = len / sizeof(u32); + for (i = 0; i < nthreads; i++) + cpu_set(i, tmp); + + lock_cpu_hotplug(); + + BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map)); + + /* Get a bitmap of unoccupied slots. */ + cpus_xor(candidate_map, cpu_possible_map, cpu_present_map); + if (cpus_empty(candidate_map)) { + /* If we get here, it most likely means that NR_CPUS is + * less than the partition's max processors setting. + */ + printk(KERN_ERR "Cannot add cpu %s; this system configuration" + " supports %d logical cpus.\n", np->full_name, + cpus_weight(cpu_possible_map)); + goto out_unlock; + } + + while (!cpus_empty(tmp)) + if (cpus_subset(tmp, candidate_map)) + /* Found a range where we can insert the new cpu(s) */ + break; + else + cpus_shift_left(tmp, tmp, nthreads); + + if (cpus_empty(tmp)) { + printk(KERN_ERR "Unable to find space in cpu_present_map for" + " processor %s with %d thread(s)\n", np->name, + nthreads); + goto out_unlock; + } + + for_each_cpu_mask(cpu, tmp) { + BUG_ON(cpu_isset(cpu, cpu_present_map)); + cpu_set(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, *intserv++); + } + err = 0; +out_unlock: + unlock_cpu_hotplug(); + return err; +} + +/* + * Update the present map for a cpu node which is going away, and set + * the hard id in the paca(s) to -1 to be consistent with boot time + * convention for non-present cpus. + */ +static void pSeries_remove_processor(struct device_node *np) +{ + unsigned int cpu; + int len, nthreads, i; + u32 *intserv; + + intserv = (u32 *)get_property(np, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + return; + + nthreads = len / sizeof(u32); + + lock_cpu_hotplug(); + for (i = 0; i < nthreads; i++) { + for_each_present_cpu(cpu) { + if (get_hard_smp_processor_id(cpu) != intserv[i]) + continue; + BUG_ON(cpu_online(cpu)); + cpu_clear(cpu, cpu_present_map); + set_hard_smp_processor_id(cpu, -1); + break; + } + if (cpu == NR_CPUS) + printk(KERN_WARNING "Could not find cpu to remove " + "with physical id 0x%x\n", intserv[i]); + } + unlock_cpu_hotplug(); +} + +static int pSeries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node) +{ + int err = NOTIFY_OK; + + switch (action) { + case PSERIES_RECONFIG_ADD: + if (pSeries_add_processor(node)) + err = NOTIFY_BAD; + break; + case PSERIES_RECONFIG_REMOVE: + pSeries_remove_processor(node); + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block pSeries_smp_nb = { + .notifier_call = pSeries_smp_notifier, +}; + +#endif /* CONFIG_HOTPLUG_CPU */ + +/** + * smp_startup_cpu() - start the given cpu + * + * At boot time, there is nothing to do for primary threads which were + * started from Open Firmware. For anything else, call RTAS with the + * appropriate start location. + * + * Returns: + * 0 - failure + * 1 - success + */ +static inline int __devinit smp_startup_cpu(unsigned int lcpu) +{ + int status; + unsigned long start_here = __pa((u32)*((unsigned long *) + pSeries_secondary_smp_init)); + unsigned int pcpu; + int start_cpu; + + if (cpu_isset(lcpu, of_spin_map)) + /* Already started by OF and sitting in spin loop */ + return 1; + + pcpu = get_hard_smp_processor_id(lcpu); + + /* Fixup atomic count: it exited inside IRQ handler. */ + paca[lcpu].__current->thread_info->preempt_count = 0; + + /* + * If the RTAS start-cpu token does not exist then presume the + * cpu is already spinning. + */ + start_cpu = rtas_token("start-cpu"); + if (start_cpu == RTAS_UNKNOWN_SERVICE) + return 1; + + status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, lcpu); + if (status != 0) { + printk(KERN_ERR "start-cpu failed: %i\n", status); + return 0; + } + + return 1; +} + +#ifdef CONFIG_XICS +static inline void smp_xics_do_message(int cpu, int msg) +{ + set_bit(msg, &xics_ipi_message[cpu].value); + mb(); + xics_cause_IPI(cpu); +} + +static void smp_xics_message_pass(int target, int msg) +{ + unsigned int i; + + if (target < NR_CPUS) { + smp_xics_do_message(target, msg); + } else { + for_each_online_cpu(i) { + if (target == MSG_ALL_BUT_SELF + && i == smp_processor_id()) + continue; + smp_xics_do_message(i, msg); + } + } +} + +static int __init smp_xics_probe(void) +{ + xics_request_IPIs(); + + return cpus_weight(cpu_possible_map); +} + +static void __devinit smp_xics_setup_cpu(int cpu) +{ + if (cpu != boot_cpuid) + xics_setup_cpu(); + + if (firmware_has_feature(FW_FEATURE_SPLPAR)) + vpa_init(cpu); + + cpu_clear(cpu, of_spin_map); + +} +#endif /* CONFIG_XICS */ + +static DEFINE_SPINLOCK(timebase_lock); +static unsigned long timebase = 0; + +static void __devinit pSeries_give_timebase(void) +{ + spin_lock(&timebase_lock); + rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL); + timebase = get_tb(); + spin_unlock(&timebase_lock); + + while (timebase) + barrier(); + rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL); +} + +static void __devinit pSeries_take_timebase(void) +{ + while (!timebase) + barrier(); + spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + spin_unlock(&timebase_lock); +} + +static void __devinit smp_pSeries_kick_cpu(int nr) +{ + BUG_ON(nr < 0 || nr >= NR_CPUS); + + if (!smp_startup_cpu(nr)) + return; + + /* + * The processor is currently spinning, waiting for the + * cpu_start field to become non-zero After we set cpu_start, + * the processor will continue on to secondary_start + */ + paca[nr].cpu_start = 1; +} + +static int smp_pSeries_cpu_bootable(unsigned int nr) +{ + /* Special case - we inhibit secondary thread startup + * during boot if the user requests it. Odd-numbered + * cpus are assumed to be secondary threads. + */ + if (system_state < SYSTEM_RUNNING && + cpu_has_feature(CPU_FTR_SMT) && + !smt_enabled_at_boot && nr % 2 != 0) + return 0; + + return 1; +} +#ifdef CONFIG_MPIC +static struct smp_ops_t pSeries_mpic_smp_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_mpic_probe, + .kick_cpu = smp_pSeries_kick_cpu, + .setup_cpu = smp_mpic_setup_cpu, +}; +#endif +#ifdef CONFIG_XICS +static struct smp_ops_t pSeries_xics_smp_ops = { + .message_pass = smp_xics_message_pass, + .probe = smp_xics_probe, + .kick_cpu = smp_pSeries_kick_cpu, + .setup_cpu = smp_xics_setup_cpu, + .cpu_bootable = smp_pSeries_cpu_bootable, +}; +#endif + +/* This is called very early */ +void __init smp_init_pSeries(void) +{ + int i; + + DBG(" -> smp_init_pSeries()\n"); + + switch (ppc64_interrupt_controller) { +#ifdef CONFIG_MPIC + case IC_OPEN_PIC: + smp_ops = &pSeries_mpic_smp_ops; + break; +#endif +#ifdef CONFIG_XICS + case IC_PPC_XIC: + smp_ops = &pSeries_xics_smp_ops; + break; +#endif + default: + panic("Invalid interrupt controller"); + } + +#ifdef CONFIG_HOTPLUG_CPU + smp_ops->cpu_disable = pSeries_cpu_disable; + smp_ops->cpu_die = pSeries_cpu_die; + + /* Processors can be added/removed only on LPAR */ + if (systemcfg->platform == PLATFORM_PSERIES_LPAR) + pSeries_reconfig_notifier_register(&pSeries_smp_nb); +#endif + + /* Mark threads which are still spinning in hold loops. */ + if (cpu_has_feature(CPU_FTR_SMT)) { + for_each_present_cpu(i) { + if (i % 2 == 0) + /* + * Even-numbered logical cpus correspond to + * primary threads. + */ + cpu_set(i, of_spin_map); + } + } else { + of_spin_map = cpu_present_map; + } + + cpu_clear(boot_cpuid, of_spin_map); + + /* Non-lpar has additional take/give timebase */ + if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) { + smp_ops->give_timebase = pSeries_give_timebase; + smp_ops->take_timebase = pSeries_take_timebase; + } + + DBG(" <- smp_init_pSeries()\n"); +} + diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c new file mode 100644 index 00000000000..866379b80c0 --- /dev/null +++ b/arch/powerpc/platforms/pseries/vio.c @@ -0,0 +1,274 @@ +/* + * IBM PowerPC pSeries Virtual I/O Infrastructure Support. + * + * Copyright (c) 2003-2005 IBM Corp. + * Dave Engebretsen engebret@us.ibm.com + * Santiago Leon santil@us.ibm.com + * Hollis Blanchard <hollisb@us.ibm.com> + * Stephen Rothwell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/kobject.h> +#include <asm/iommu.h> +#include <asm/dma.h> +#include <asm/prom.h> +#include <asm/vio.h> +#include <asm/hvcall.h> +#include <asm/tce.h> + +extern struct subsystem devices_subsys; /* needed for vio_find_name() */ + +static void probe_bus_pseries(void) +{ + struct device_node *node_vroot, *of_node; + + node_vroot = find_devices("vdevice"); + if ((node_vroot == NULL) || (node_vroot->child == NULL)) + /* this machine doesn't do virtual IO, and that's ok */ + return; + + /* + * Create struct vio_devices for each virtual device in the device tree. + * Drivers will associate with them later. + */ + for (of_node = node_vroot->child; of_node != NULL; + of_node = of_node->sibling) { + printk(KERN_DEBUG "%s: processing %p\n", __FUNCTION__, of_node); + vio_register_device_node(of_node); + } +} + +/** + * vio_match_device_pseries: - Tell if a pSeries VIO device matches a + * vio_device_id + */ +static int vio_match_device_pseries(const struct vio_device_id *id, + const struct vio_dev *dev) +{ + return (strncmp(dev->type, id->type, strlen(id->type)) == 0) && + device_is_compatible(dev->dev.platform_data, id->compat); +} + +static void vio_release_device_pseries(struct device *dev) +{ + /* XXX free TCE table */ + of_node_put(dev->platform_data); +} + +static ssize_t viodev_show_devspec(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct device_node *of_node = dev->platform_data; + + return sprintf(buf, "%s\n", of_node->full_name); +} +DEVICE_ATTR(devspec, S_IRUSR | S_IRGRP | S_IROTH, viodev_show_devspec, NULL); + +static void vio_unregister_device_pseries(struct vio_dev *viodev) +{ + device_remove_file(&viodev->dev, &dev_attr_devspec); +} + +static struct vio_bus_ops vio_bus_ops_pseries = { + .match = vio_match_device_pseries, + .unregister_device = vio_unregister_device_pseries, + .release_device = vio_release_device_pseries, +}; + +/** + * vio_bus_init_pseries: - Initialize the pSeries virtual IO bus + */ +static int __init vio_bus_init_pseries(void) +{ + int err; + + err = vio_bus_init(&vio_bus_ops_pseries); + if (err == 0) + probe_bus_pseries(); + return err; +} + +__initcall(vio_bus_init_pseries); + +/** + * vio_build_iommu_table: - gets the dma information from OF and + * builds the TCE tree. + * @dev: the virtual device. + * + * Returns a pointer to the built tce tree, or NULL if it can't + * find property. +*/ +static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) +{ + unsigned int *dma_window; + struct iommu_table *newTceTable; + unsigned long offset; + int dma_window_property_size; + + dma_window = (unsigned int *) get_property(dev->dev.platform_data, "ibm,my-dma-window", &dma_window_property_size); + if(!dma_window) { + return NULL; + } + + newTceTable = (struct iommu_table *) kmalloc(sizeof(struct iommu_table), GFP_KERNEL); + + /* There should be some code to extract the phys-encoded offset + using prom_n_addr_cells(). However, according to a comment + on earlier versions, it's always zero, so we don't bother */ + offset = dma_window[1] >> PAGE_SHIFT; + + /* TCE table size - measured in tce entries */ + newTceTable->it_size = dma_window[4] >> PAGE_SHIFT; + /* offset for VIO should always be 0 */ + newTceTable->it_offset = offset; + newTceTable->it_busno = 0; + newTceTable->it_index = (unsigned long)dma_window[0]; + newTceTable->it_type = TCE_VB; + + return iommu_init_table(newTceTable); +} + +/** + * vio_register_device_node: - Register a new vio device. + * @of_node: The OF node for this device. + * + * Creates and initializes a vio_dev structure from the data in + * of_node (dev.platform_data) and adds it to the list of virtual devices. + * Returns a pointer to the created vio_dev or NULL if node has + * NULL device_type or compatible fields. + */ +struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) +{ + struct vio_dev *viodev; + unsigned int *unit_address; + unsigned int *irq_p; + + /* we need the 'device_type' property, in order to match with drivers */ + if ((NULL == of_node->type)) { + printk(KERN_WARNING + "%s: node %s missing 'device_type'\n", __FUNCTION__, + of_node->name ? of_node->name : "<unknown>"); + return NULL; + } + + unit_address = (unsigned int *)get_property(of_node, "reg", NULL); + if (!unit_address) { + printk(KERN_WARNING "%s: node %s missing 'reg'\n", __FUNCTION__, + of_node->name ? of_node->name : "<unknown>"); + return NULL; + } + + /* allocate a vio_dev for this node */ + viodev = kmalloc(sizeof(struct vio_dev), GFP_KERNEL); + if (!viodev) { + return NULL; + } + memset(viodev, 0, sizeof(struct vio_dev)); + + viodev->dev.platform_data = of_node_get(of_node); + + viodev->irq = NO_IRQ; + irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL); + if (irq_p) { + int virq = virt_irq_create_mapping(*irq_p); + if (virq == NO_IRQ) { + printk(KERN_ERR "Unable to allocate interrupt " + "number for %s\n", of_node->full_name); + } else + viodev->irq = irq_offset_up(virq); + } + + snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address); + viodev->name = of_node->name; + viodev->type = of_node->type; + viodev->unit_address = *unit_address; + viodev->iommu_table = vio_build_iommu_table(viodev); + + /* register with generic device framework */ + if (vio_register_device(viodev) == NULL) { + /* XXX free TCE table */ + kfree(viodev); + return NULL; + } + device_create_file(&viodev->dev, &dev_attr_devspec); + + return viodev; +} +EXPORT_SYMBOL(vio_register_device_node); + +/** + * vio_get_attribute: - get attribute for virtual device + * @vdev: The vio device to get property. + * @which: The property/attribute to be extracted. + * @length: Pointer to length of returned data size (unused if NULL). + * + * Calls prom.c's get_property() to return the value of the + * attribute specified by the preprocessor constant @which +*/ +const void * vio_get_attribute(struct vio_dev *vdev, void* which, int* length) +{ + return get_property(vdev->dev.platform_data, (char*)which, length); +} +EXPORT_SYMBOL(vio_get_attribute); + +/* vio_find_name() - internal because only vio.c knows how we formatted the + * kobject name + * XXX once vio_bus_type.devices is actually used as a kset in + * drivers/base/bus.c, this function should be removed in favor of + * "device_find(kobj_name, &vio_bus_type)" + */ +static struct vio_dev *vio_find_name(const char *kobj_name) +{ + struct kobject *found; + + found = kset_find_obj(&devices_subsys.kset, kobj_name); + if (!found) + return NULL; + + return to_vio_dev(container_of(found, struct device, kobj)); +} + +/** + * vio_find_node - find an already-registered vio_dev + * @vnode: device_node of the virtual device we're looking for + */ +struct vio_dev *vio_find_node(struct device_node *vnode) +{ + uint32_t *unit_address; + char kobj_name[BUS_ID_SIZE]; + + /* construct the kobject name from the device node */ + unit_address = (uint32_t *)get_property(vnode, "reg", NULL); + if (!unit_address) + return NULL; + snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address); + + return vio_find_name(kobj_name); +} +EXPORT_SYMBOL(vio_find_node); + +int vio_enable_interrupts(struct vio_dev *dev) +{ + int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE); + if (rc != H_Success) + printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc); + return rc; +} +EXPORT_SYMBOL(vio_enable_interrupts); + +int vio_disable_interrupts(struct vio_dev *dev) +{ + int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE); + if (rc != H_Success) + printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc); + return rc; +} +EXPORT_SYMBOL(vio_disable_interrupts); diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c new file mode 100644 index 00000000000..c72c86f05cb --- /dev/null +++ b/arch/powerpc/platforms/pseries/xics.c @@ -0,0 +1,747 @@ +/* + * arch/powerpc/platforms/pseries/xics.c + * + * Copyright 2000 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/threads.h> +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/signal.h> +#include <linux/init.h> +#include <linux/gfp.h> +#include <linux/radix-tree.h> +#include <linux/cpu.h> +#include <asm/prom.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/smp.h> +#include <asm/rtas.h> +#include <asm/hvcall.h> +#include <asm/machdep.h> +#include <asm/i8259.h> + +#include "xics.h" + +static unsigned int xics_startup(unsigned int irq); +static void xics_enable_irq(unsigned int irq); +static void xics_disable_irq(unsigned int irq); +static void xics_mask_and_ack_irq(unsigned int irq); +static void xics_end_irq(unsigned int irq); +static void xics_set_affinity(unsigned int irq_nr, cpumask_t cpumask); + +static struct hw_interrupt_type xics_pic = { + .typename = " XICS ", + .startup = xics_startup, + .enable = xics_enable_irq, + .disable = xics_disable_irq, + .ack = xics_mask_and_ack_irq, + .end = xics_end_irq, + .set_affinity = xics_set_affinity +}; + +static struct hw_interrupt_type xics_8259_pic = { + .typename = " XICS/8259", + .ack = xics_mask_and_ack_irq, +}; + +/* This is used to map real irq numbers to virtual */ +static struct radix_tree_root irq_map = RADIX_TREE_INIT(GFP_ATOMIC); + +#define XICS_IPI 2 +#define XICS_IRQ_SPURIOUS 0 + +/* Want a priority other than 0. Various HW issues require this. */ +#define DEFAULT_PRIORITY 5 + +/* + * Mark IPIs as higher priority so we can take them inside interrupts that + * arent marked SA_INTERRUPT + */ +#define IPI_PRIORITY 4 + +struct xics_ipl { + union { + u32 word; + u8 bytes[4]; + } xirr_poll; + union { + u32 word; + u8 bytes[4]; + } xirr; + u32 dummy; + union { + u32 word; + u8 bytes[4]; + } qirr; +}; + +static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS]; + +static int xics_irq_8259_cascade = 0; +static int xics_irq_8259_cascade_real = 0; +static unsigned int default_server = 0xFF; +static unsigned int default_distrib_server = 0; +static unsigned int interrupt_server_size = 8; + +/* + * XICS only has a single IPI, so encode the messages per CPU + */ +struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned; + +/* RTAS service tokens */ +static int ibm_get_xive; +static int ibm_set_xive; +static int ibm_int_on; +static int ibm_int_off; + +typedef struct { + int (*xirr_info_get)(int cpu); + void (*xirr_info_set)(int cpu, int val); + void (*cppr_info)(int cpu, u8 val); + void (*qirr_info)(int cpu, u8 val); +} xics_ops; + + +/* SMP */ + +static int pSeries_xirr_info_get(int n_cpu) +{ + return in_be32(&xics_per_cpu[n_cpu]->xirr.word); +} + +static void pSeries_xirr_info_set(int n_cpu, int value) +{ + out_be32(&xics_per_cpu[n_cpu]->xirr.word, value); +} + +static void pSeries_cppr_info(int n_cpu, u8 value) +{ + out_8(&xics_per_cpu[n_cpu]->xirr.bytes[0], value); +} + +static void pSeries_qirr_info(int n_cpu, u8 value) +{ + out_8(&xics_per_cpu[n_cpu]->qirr.bytes[0], value); +} + +static xics_ops pSeries_ops = { + pSeries_xirr_info_get, + pSeries_xirr_info_set, + pSeries_cppr_info, + pSeries_qirr_info +}; + +static xics_ops *ops = &pSeries_ops; + + +/* LPAR */ + +static inline long plpar_eoi(unsigned long xirr) +{ + return plpar_hcall_norets(H_EOI, xirr); +} + +static inline long plpar_cppr(unsigned long cppr) +{ + return plpar_hcall_norets(H_CPPR, cppr); +} + +static inline long plpar_ipi(unsigned long servernum, unsigned long mfrr) +{ + return plpar_hcall_norets(H_IPI, servernum, mfrr); +} + +static inline long plpar_xirr(unsigned long *xirr_ret) +{ + unsigned long dummy; + return plpar_hcall(H_XIRR, 0, 0, 0, 0, xirr_ret, &dummy, &dummy); +} + +static int pSeriesLP_xirr_info_get(int n_cpu) +{ + unsigned long lpar_rc; + unsigned long return_value; + + lpar_rc = plpar_xirr(&return_value); + if (lpar_rc != H_Success) + panic(" bad return code xirr - rc = %lx \n", lpar_rc); + return (int)return_value; +} + +static void pSeriesLP_xirr_info_set(int n_cpu, int value) +{ + unsigned long lpar_rc; + unsigned long val64 = value & 0xffffffff; + + lpar_rc = plpar_eoi(val64); + if (lpar_rc != H_Success) + panic("bad return code EOI - rc = %ld, value=%lx\n", lpar_rc, + val64); +} + +void pSeriesLP_cppr_info(int n_cpu, u8 value) +{ + unsigned long lpar_rc; + + lpar_rc = plpar_cppr(value); + if (lpar_rc != H_Success) + panic("bad return code cppr - rc = %lx\n", lpar_rc); +} + +static void pSeriesLP_qirr_info(int n_cpu , u8 value) +{ + unsigned long lpar_rc; + + lpar_rc = plpar_ipi(get_hard_smp_processor_id(n_cpu), value); + if (lpar_rc != H_Success) + panic("bad return code qirr - rc = %lx\n", lpar_rc); +} + +xics_ops pSeriesLP_ops = { + pSeriesLP_xirr_info_get, + pSeriesLP_xirr_info_set, + pSeriesLP_cppr_info, + pSeriesLP_qirr_info +}; + +static unsigned int xics_startup(unsigned int virq) +{ + unsigned int irq; + + irq = irq_offset_down(virq); + if (radix_tree_insert(&irq_map, virt_irq_to_real(irq), + &virt_irq_to_real_map[irq]) == -ENOMEM) + printk(KERN_CRIT "Out of memory creating real -> virtual" + " IRQ mapping for irq %u (real 0x%x)\n", + virq, virt_irq_to_real(irq)); + xics_enable_irq(virq); + return 0; /* return value is ignored */ +} + +static unsigned int real_irq_to_virt(unsigned int real_irq) +{ + unsigned int *ptr; + + ptr = radix_tree_lookup(&irq_map, real_irq); + if (ptr == NULL) + return NO_IRQ; + return ptr - virt_irq_to_real_map; +} + +#ifdef CONFIG_SMP +static int get_irq_server(unsigned int irq) +{ + unsigned int server; + /* For the moment only implement delivery to all cpus or one cpu */ + cpumask_t cpumask = irq_affinity[irq]; + cpumask_t tmp = CPU_MASK_NONE; + + if (!distribute_irqs) + return default_server; + + if (cpus_equal(cpumask, CPU_MASK_ALL)) { + server = default_distrib_server; + } else { + cpus_and(tmp, cpu_online_map, cpumask); + + if (cpus_empty(tmp)) + server = default_distrib_server; + else + server = get_hard_smp_processor_id(first_cpu(tmp)); + } + + return server; + +} +#else +static int get_irq_server(unsigned int irq) +{ + return default_server; +} +#endif + +static void xics_enable_irq(unsigned int virq) +{ + unsigned int irq; + int call_status; + unsigned int server; + + irq = virt_irq_to_real(irq_offset_down(virq)); + if (irq == XICS_IPI) + return; + + server = get_irq_server(virq); + call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server, + DEFAULT_PRIORITY); + if (call_status != 0) { + printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_set_xive " + "returned %d\n", irq, call_status); + printk("set_xive %x, server %x\n", ibm_set_xive, server); + return; + } + + /* Now unmask the interrupt (often a no-op) */ + call_status = rtas_call(ibm_int_on, 1, 1, NULL, irq); + if (call_status != 0) { + printk(KERN_ERR "xics_enable_irq: irq=%u: ibm_int_on " + "returned %d\n", irq, call_status); + return; + } +} + +static void xics_disable_real_irq(unsigned int irq) +{ + int call_status; + unsigned int server; + + if (irq == XICS_IPI) + return; + + call_status = rtas_call(ibm_int_off, 1, 1, NULL, irq); + if (call_status != 0) { + printk(KERN_ERR "xics_disable_real_irq: irq=%u: " + "ibm_int_off returned %d\n", irq, call_status); + return; + } + + server = get_irq_server(irq); + /* Have to set XIVE to 0xff to be able to remove a slot */ + call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server, 0xff); + if (call_status != 0) { + printk(KERN_ERR "xics_disable_irq: irq=%u: ibm_set_xive(0xff)" + " returned %d\n", irq, call_status); + return; + } +} + +static void xics_disable_irq(unsigned int virq) +{ + unsigned int irq; + + irq = virt_irq_to_real(irq_offset_down(virq)); + xics_disable_real_irq(irq); +} + +static void xics_end_irq(unsigned int irq) +{ + int cpu = smp_processor_id(); + + iosync(); + ops->xirr_info_set(cpu, ((0xff << 24) | + (virt_irq_to_real(irq_offset_down(irq))))); + +} + +static void xics_mask_and_ack_irq(unsigned int irq) +{ + int cpu = smp_processor_id(); + + if (irq < irq_offset_value()) { + i8259_pic.ack(irq); + iosync(); + ops->xirr_info_set(cpu, ((0xff<<24) | + xics_irq_8259_cascade_real)); + iosync(); + } +} + +int xics_get_irq(struct pt_regs *regs) +{ + unsigned int cpu = smp_processor_id(); + unsigned int vec; + int irq; + + vec = ops->xirr_info_get(cpu); + /* (vec >> 24) == old priority */ + vec &= 0x00ffffff; + + /* for sanity, this had better be < NR_IRQS - 16 */ + if (vec == xics_irq_8259_cascade_real) { + irq = i8259_irq(regs); + if (irq == -1) { + /* Spurious cascaded interrupt. Still must ack xics */ + xics_end_irq(irq_offset_up(xics_irq_8259_cascade)); + + irq = -1; + } + } else if (vec == XICS_IRQ_SPURIOUS) { + irq = -1; + } else { + irq = real_irq_to_virt(vec); + if (irq == NO_IRQ) + irq = real_irq_to_virt_slowpath(vec); + if (irq == NO_IRQ) { + printk(KERN_ERR "Interrupt %u (real) is invalid," + " disabling it.\n", vec); + xics_disable_real_irq(vec); + } else + irq = irq_offset_up(irq); + } + return irq; +} + +#ifdef CONFIG_SMP + +irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + + ops->qirr_info(cpu, 0xff); + + WARN_ON(cpu_is_offline(cpu)); + + while (xics_ipi_message[cpu].value) { + if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, + &xics_ipi_message[cpu].value)) { + mb(); + smp_message_recv(PPC_MSG_CALL_FUNCTION, regs); + } + if (test_and_clear_bit(PPC_MSG_RESCHEDULE, + &xics_ipi_message[cpu].value)) { + mb(); + smp_message_recv(PPC_MSG_RESCHEDULE, regs); + } +#if 0 + if (test_and_clear_bit(PPC_MSG_MIGRATE_TASK, + &xics_ipi_message[cpu].value)) { + mb(); + smp_message_recv(PPC_MSG_MIGRATE_TASK, regs); + } +#endif +#ifdef CONFIG_DEBUGGER + if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, + &xics_ipi_message[cpu].value)) { + mb(); + smp_message_recv(PPC_MSG_DEBUGGER_BREAK, regs); + } +#endif + } + return IRQ_HANDLED; +} + +void xics_cause_IPI(int cpu) +{ + ops->qirr_info(cpu, IPI_PRIORITY); +} +#endif /* CONFIG_SMP */ + +void xics_setup_cpu(void) +{ + int cpu = smp_processor_id(); + + ops->cppr_info(cpu, 0xff); + iosync(); + + /* + * Put the calling processor into the GIQ. This is really only + * necessary from a secondary thread as the OF start-cpu interface + * performs this function for us on primary threads. + * + * XXX: undo of teardown on kexec needs this too, as may hotplug + */ + rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + (1UL << interrupt_server_size) - 1 - default_distrib_server, 1); +} + +void xics_init_IRQ(void) +{ + int i; + unsigned long intr_size = 0; + struct device_node *np; + uint *ireg, ilen, indx = 0; + unsigned long intr_base = 0; + struct xics_interrupt_node { + unsigned long addr; + unsigned long size; + } intnodes[NR_CPUS]; + + ppc64_boot_msg(0x20, "XICS Init"); + + ibm_get_xive = rtas_token("ibm,get-xive"); + ibm_set_xive = rtas_token("ibm,set-xive"); + ibm_int_on = rtas_token("ibm,int-on"); + ibm_int_off = rtas_token("ibm,int-off"); + + np = of_find_node_by_type(NULL, "PowerPC-External-Interrupt-Presentation"); + if (!np) + panic("xics_init_IRQ: can't find interrupt presentation"); + +nextnode: + ireg = (uint *)get_property(np, "ibm,interrupt-server-ranges", NULL); + if (ireg) { + /* + * set node starting index for this node + */ + indx = *ireg; + } + + ireg = (uint *)get_property(np, "reg", &ilen); + if (!ireg) + panic("xics_init_IRQ: can't find interrupt reg property"); + + while (ilen) { + intnodes[indx].addr = (unsigned long)*ireg++ << 32; + ilen -= sizeof(uint); + intnodes[indx].addr |= *ireg++; + ilen -= sizeof(uint); + intnodes[indx].size = (unsigned long)*ireg++ << 32; + ilen -= sizeof(uint); + intnodes[indx].size |= *ireg++; + ilen -= sizeof(uint); + indx++; + if (indx >= NR_CPUS) break; + } + + np = of_find_node_by_type(np, "PowerPC-External-Interrupt-Presentation"); + if ((indx < NR_CPUS) && np) goto nextnode; + + /* Find the server numbers for the boot cpu. */ + for (np = of_find_node_by_type(NULL, "cpu"); + np; + np = of_find_node_by_type(np, "cpu")) { + ireg = (uint *)get_property(np, "reg", &ilen); + if (ireg && ireg[0] == boot_cpuid_phys) { + ireg = (uint *)get_property(np, "ibm,ppc-interrupt-gserver#s", + &ilen); + i = ilen / sizeof(int); + if (ireg && i > 0) { + default_server = ireg[0]; + default_distrib_server = ireg[i-1]; /* take last element */ + } + ireg = (uint *)get_property(np, + "ibm,interrupt-server#-size", NULL); + if (ireg) + interrupt_server_size = *ireg; + break; + } + } + of_node_put(np); + + intr_base = intnodes[0].addr; + intr_size = intnodes[0].size; + + np = of_find_node_by_type(NULL, "interrupt-controller"); + if (!np) { + printk(KERN_WARNING "xics: no ISA interrupt controller\n"); + xics_irq_8259_cascade_real = -1; + xics_irq_8259_cascade = -1; + } else { + ireg = (uint *) get_property(np, "interrupts", NULL); + if (!ireg) + panic("xics_init_IRQ: can't find ISA interrupts property"); + + xics_irq_8259_cascade_real = *ireg; + xics_irq_8259_cascade + = virt_irq_create_mapping(xics_irq_8259_cascade_real); + of_node_put(np); + } + + if (systemcfg->platform == PLATFORM_PSERIES) { +#ifdef CONFIG_SMP + for_each_cpu(i) { + int hard_id; + + /* FIXME: Do this dynamically! --RR */ + if (!cpu_present(i)) + continue; + + hard_id = get_hard_smp_processor_id(i); + xics_per_cpu[i] = ioremap(intnodes[hard_id].addr, + intnodes[hard_id].size); + } +#else + xics_per_cpu[0] = ioremap(intr_base, intr_size); +#endif /* CONFIG_SMP */ + } else if (systemcfg->platform == PLATFORM_PSERIES_LPAR) { + ops = &pSeriesLP_ops; + } + + xics_8259_pic.enable = i8259_pic.enable; + xics_8259_pic.disable = i8259_pic.disable; + for (i = 0; i < 16; ++i) + get_irq_desc(i)->handler = &xics_8259_pic; + for (; i < NR_IRQS; ++i) + get_irq_desc(i)->handler = &xics_pic; + + xics_setup_cpu(); + + ppc64_boot_msg(0x21, "XICS Done"); +} + +/* + * We cant do this in init_IRQ because we need the memory subsystem up for + * request_irq() + */ +static int __init xics_setup_i8259(void) +{ + if (ppc64_interrupt_controller == IC_PPC_XIC && + xics_irq_8259_cascade != -1) { + if (request_irq(irq_offset_up(xics_irq_8259_cascade), + no_action, 0, "8259 cascade", NULL)) + printk(KERN_ERR "xics_setup_i8259: couldn't get 8259 " + "cascade\n"); + i8259_init(0, 0); + } + return 0; +} +arch_initcall(xics_setup_i8259); + +#ifdef CONFIG_SMP +void xics_request_IPIs(void) +{ + virt_irq_to_real_map[XICS_IPI] = XICS_IPI; + + /* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */ + request_irq(irq_offset_up(XICS_IPI), xics_ipi_action, SA_INTERRUPT, + "IPI", NULL); + get_irq_desc(irq_offset_up(XICS_IPI))->status |= IRQ_PER_CPU; +} +#endif + +static void xics_set_affinity(unsigned int virq, cpumask_t cpumask) +{ + unsigned int irq; + int status; + int xics_status[2]; + unsigned long newmask; + cpumask_t tmp = CPU_MASK_NONE; + + irq = virt_irq_to_real(irq_offset_down(virq)); + if (irq == XICS_IPI || irq == NO_IRQ) + return; + + status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); + + if (status) { + printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive " + "returns %d\n", irq, status); + return; + } + + /* For the moment only implement delivery to all cpus or one cpu */ + if (cpus_equal(cpumask, CPU_MASK_ALL)) { + newmask = default_distrib_server; + } else { + cpus_and(tmp, cpu_online_map, cpumask); + if (cpus_empty(tmp)) + return; + newmask = get_hard_smp_processor_id(first_cpu(tmp)); + } + + status = rtas_call(ibm_set_xive, 3, 1, NULL, + irq, newmask, xics_status[1]); + + if (status) { + printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive " + "returns %d\n", irq, status); + return; + } +} + +void xics_teardown_cpu(int secondary) +{ + int cpu = smp_processor_id(); + + ops->cppr_info(cpu, 0x00); + iosync(); + + /* + * Some machines need to have at least one cpu in the GIQ, + * so leave the master cpu in the group. + */ + if (secondary) { + /* + * we need to EOI the IPI if we got here from kexec down IPI + * + * probably need to check all the other interrupts too + * should we be flagging idle loop instead? + * or creating some task to be scheduled? + */ + ops->xirr_info_set(cpu, XICS_IPI); + rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + (1UL << interrupt_server_size) - 1 - + default_distrib_server, 0); + } +} + +#ifdef CONFIG_HOTPLUG_CPU + +/* Interrupts are disabled. */ +void xics_migrate_irqs_away(void) +{ + int status; + unsigned int irq, virq, cpu = smp_processor_id(); + + /* Reject any interrupt that was queued to us... */ + ops->cppr_info(cpu, 0); + iosync(); + + /* remove ourselves from the global interrupt queue */ + status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + (1UL << interrupt_server_size) - 1 - default_distrib_server, 0); + WARN_ON(status < 0); + + /* Allow IPIs again... */ + ops->cppr_info(cpu, DEFAULT_PRIORITY); + iosync(); + + for_each_irq(virq) { + irq_desc_t *desc; + int xics_status[2]; + unsigned long flags; + + /* We cant set affinity on ISA interrupts */ + if (virq < irq_offset_value()) + continue; + + desc = get_irq_desc(virq); + irq = virt_irq_to_real(irq_offset_down(virq)); + + /* We need to get IPIs still. */ + if (irq == XICS_IPI || irq == NO_IRQ) + continue; + + /* We only need to migrate enabled IRQS */ + if (desc == NULL || desc->handler == NULL + || desc->action == NULL + || desc->handler->set_affinity == NULL) + continue; + + spin_lock_irqsave(&desc->lock, flags); + + status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); + if (status) { + printk(KERN_ERR "migrate_irqs_away: irq=%u " + "ibm,get-xive returns %d\n", + virq, status); + goto unlock; + } + + /* + * We only support delivery to all cpus or to one cpu. + * The irq has to be migrated only in the single cpu + * case. + */ + if (xics_status[0] != get_hard_smp_processor_id(cpu)) + goto unlock; + + printk(KERN_WARNING "IRQ %u affinity broken off cpu %u\n", + virq, cpu); + + /* Reset affinity to all cpus */ + desc->handler->set_affinity(virq, CPU_MASK_ALL); + irq_affinity[virq] = CPU_MASK_ALL; +unlock: + spin_unlock_irqrestore(&desc->lock, flags); + } +} +#endif diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h new file mode 100644 index 00000000000..e14c70868f1 --- /dev/null +++ b/arch/powerpc/platforms/pseries/xics.h @@ -0,0 +1,34 @@ +/* + * arch/powerpc/platforms/pseries/xics.h + * + * Copyright 2000 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _POWERPC_KERNEL_XICS_H +#define _POWERPC_KERNEL_XICS_H + +#include <linux/cache.h> + +void xics_init_IRQ(void); +int xics_get_irq(struct pt_regs *); +void xics_setup_cpu(void); +void xics_teardown_cpu(int secondary); +void xics_cause_IPI(int cpu); +void xics_request_IPIs(void); +void xics_migrate_irqs_away(void); + +/* first argument is ignored for now*/ +void pSeriesLP_cppr_info(int n_cpu, u8 value); + +struct xics_ipi_struct { + volatile unsigned long value; +} ____cacheline_aligned; + +extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned; + +#endif /* _POWERPC_KERNEL_XICS_H */ |