diff options
Diffstat (limited to 'arch/powerpc/platforms')
| -rw-r--r-- | arch/powerpc/platforms/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/maple.h | 12 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/pci.c | 522 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/setup.c | 295 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/time.c | 180 |
6 files changed, 1011 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 01723d491b5..172c0db6350 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_85xx) += 85xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ +obj-$(CONFIG_PPC_MAPLE) += maple/ diff --git a/arch/powerpc/platforms/maple/Makefile b/arch/powerpc/platforms/maple/Makefile new file mode 100644 index 00000000000..1be1a993c5f --- /dev/null +++ b/arch/powerpc/platforms/maple/Makefile @@ -0,0 +1 @@ +obj-y += setup.o pci.o time.o diff --git a/arch/powerpc/platforms/maple/maple.h b/arch/powerpc/platforms/maple/maple.h new file mode 100644 index 00000000000..0657c579b84 --- /dev/null +++ b/arch/powerpc/platforms/maple/maple.h @@ -0,0 +1,12 @@ +/* + * Declarations for maple-specific code. + * + * Maple is the name of a PPC970 evaluation board. + */ +extern int maple_set_rtc_time(struct rtc_time *tm); +extern void maple_get_rtc_time(struct rtc_time *tm); +extern unsigned long maple_get_boot_time(void); +extern void maple_calibrate_decr(void); +extern void maple_pci_init(void); +extern void maple_pcibios_fixup(void); +extern int maple_pci_get_legacy_ide_irq(struct pci_dev *dev, int channel); diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c new file mode 100644 index 00000000000..340c21caeae --- /dev/null +++ b/arch/powerpc/platforms/maple/pci.c @@ -0,0 +1,522 @@ +/* + * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/iommu.h> +#include <asm/ppc-pci.h> + +#include "maple.h" + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static struct pci_controller *u3_agp, *u3_ht; + +static int __init fixup_one_level_bus_range(struct device_node *node, int higher) +{ + for (; node != 0;node = node->sibling) { + int * bus_range; + unsigned int *class_code; + int len; + + /* For PCI<->PCI bridges or CardBus bridges, we go down */ + class_code = (unsigned int *) get_property(node, "class-code", NULL); + if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + bus_range = (int *) get_property(node, "bus-range", &len); + if (bus_range != NULL && len > 2 * sizeof(int)) { + if (bus_range[1] > higher) + higher = bus_range[1]; + } + higher = fixup_one_level_bus_range(node->child, higher); + } + return higher; +} + +/* This routine fixes the "bus-range" property of all bridges in the + * system since they tend to have their "last" member wrong on macs + * + * Note that the bus numbers manipulated here are OF bus numbers, they + * are not Linux bus numbers. + */ +static void __init fixup_bus_range(struct device_node *bridge) +{ + int * bus_range; + int len; + + /* Lookup the "bus-range" property for the hose */ + bus_range = (int *) get_property(bridge, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s\n", + bridge->full_name); + return; + } + bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); +} + + +#define U3_AGP_CFA0(devfn, off) \ + ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ + | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ + | (((unsigned long)(off)) & 0xFCUL)) + +#define U3_AGP_CFA1(bus, devfn, off) \ + ((((unsigned long)(bus)) << 16) \ + |(((unsigned long)(devfn)) << 8) \ + |(((unsigned long)(off)) & 0xFCUL) \ + |1UL) + +static unsigned long u3_agp_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, u8 offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) { + if (dev_fn < (11 << 3)) + return 0; + caddr = U3_AGP_CFA0(dev_fn, offset); + } else + caddr = U3_AGP_CFA1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= 0x07; + return ((unsigned long)hose->cfg_data) + offset; +} + +static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_agp_pci_ops = +{ + u3_agp_read_config, + u3_agp_write_config +}; + + +#define U3_HT_CFA0(devfn, off) \ + ((((unsigned long)devfn) << 8) | offset) +#define U3_HT_CFA1(bus, devfn, off) \ + (U3_HT_CFA0(devfn, off) \ + + (((unsigned long)bus) << 16) \ + + 0x01000000UL) + +static unsigned long u3_ht_cfg_access(struct pci_controller* hose, + u8 bus, u8 devfn, u8 offset) +{ + if (bus == hose->first_busno) { + if (PCI_SLOT(devfn) == 0) + return 0; + return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); + } else + return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); +} + +static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_ht_pci_ops = +{ + u3_ht_read_config, + u3_ht_write_config +}; + +static void __init setup_u3_agp(struct pci_controller* hose) +{ + /* On G5, we move AGP up to high bus number so we don't need + * to reassign bus numbers for HT. If we ever have P2P bridges + * on AGP, we'll have to move pci_assign_all_buses to the + * pci_controller structure so we enable it for AGP and not for + * HT childs. + * We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->first_busno = 0xf0; + hose->last_busno = 0xff; + hose->ops = &u3_agp_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + u3_agp = hose; +} + +static void __init setup_u3_ht(struct pci_controller* hose) +{ + hose->ops = &u3_ht_pci_ops; + + /* We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + + hose->first_busno = 0; + hose->last_busno = 0xef; + + u3_ht = hose; +} + +static int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + char* disp_name; + int *bus_range; + int primary = 1; + struct property *of_prop; + + DBG("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", + dev->full_name); + } + + hose = alloc_bootmem(sizeof(struct pci_controller)); + if (hose == NULL) + return -ENOMEM; + pci_setup_pci_controller(hose); + + hose->arch_data = dev; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + of_prop = alloc_bootmem(sizeof(struct property) + + sizeof(hose->global_number)); + if (of_prop) { + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(hose->global_number); + of_prop->value = (unsigned char *)&of_prop[1]; + memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); + prom_add_property(dev, of_prop); + } + + disp_name = NULL; + if (device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose); + disp_name = "U3-AGP"; + primary = 0; + } else if (device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose); + disp_name = "U3-HT"; + primary = 1; + } + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", + disp_name, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + pci_setup_phb_io(hose, primary); + + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); + + return 0; +} + + +void __init maple_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + DBG(" -> maple_pcibios_fixup\n"); + + for_each_pci_dev(dev) + pci_read_irq_line(dev); + + /* Do the mapping of the IO space */ + phbs_remap_io(); + + DBG(" <- maple_pcibios_fixup\n"); +} + +static void __init maple_fixup_phb_resources(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; + hose->io_resource.start += offset; + hose->io_resource.end += offset; + printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", + hose->global_number, + hose->io_resource.start, hose->io_resource.end); + } +} + +void __init maple_pci_init(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + /* Probe root PCI hosts, that is on U3 the AGP host and the + * HyperTransport host. That one is actually "kept" around + * and actually added last as it's resource management relies + * on the AGP resources to have been setup first + */ + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n"); + return; + } + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { + if (np->name == NULL) + continue; + if (strcmp(np->name, "pci") == 0) { + if (add_bridge(np) == 0) + of_node_get(np); + } + if (strcmp(np->name, "ht") == 0) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + + /* Now setup the HyperTransport host if we found any + */ + if (ht && add_bridge(ht) != 0) + of_node_put(ht); + + /* Fixup the IO resources on our host bridges as the common code + * does it only for childs of the host bridges + */ + maple_fixup_phb_resources(); + + /* Setup the linkage between OF nodes and PHBs */ + pci_devs_phb_init(); + + /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We + * assume there is no P2P bridge on the AGP bus, which should be a + * safe assumptions hopefully. + */ + if (u3_agp) { + struct device_node *np = u3_agp->arch_data; + PCI_DN(np)->busno = 0xf0; + for (np = np->child; np; np = np->sibling) + PCI_DN(np)->busno = 0xf0; + } + + /* Tell pci.c to use the common resource allocation mecanism */ + pci_probe_only = 0; + + /* Allow all IO */ + io_page_mask = -1; +} + +int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) +{ + struct device_node *np; + int irq = channel ? 15 : 14; + + if (pdev->vendor != PCI_VENDOR_ID_AMD || + pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) + return irq; + + np = pci_device_to_OF_node(pdev); + if (np == NULL) + return irq; + if (np->n_intrs < 2) + return irq; + return np->intrs[channel & 0x1].line; +} + +/* XXX: To remove once all firmwares are ok */ +static void fixup_maple_ide(struct pci_dev* dev) +{ +#if 0 /* Enable this to enable IDE port 0 */ + { + u8 v; + + pci_read_config_byte(dev, 0x40, &v); + v |= 2; + pci_write_config_byte(dev, 0x40, v); + } +#endif +#if 0 /* fix bus master base */ + pci_write_config_dword(dev, 0x20, 0xcc01); + printk("old ide resource: %lx -> %lx \n", + dev->resource[4].start, dev->resource[4].end); + dev->resource[4].start = 0xcc00; + dev->resource[4].end = 0xcc10; +#endif +#if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ + { + struct pci_dev *apicdev; + u32 v; + + apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0)); + if (apicdev == NULL) + printk("IDE Fixup IRQ: Can't find IO-APIC !\n"); + else { + pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14); + pci_read_config_dword(apicdev, 0xf4, &v); + v &= ~0x00000022; + pci_write_config_dword(apicdev, 0xf4, v); + pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15); + pci_read_config_dword(apicdev, 0xf4, &v); + v &= ~0x00000022; + pci_write_config_dword(apicdev, 0xf4, v); + pci_dev_put(apicdev); + } + } +#endif +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, + fixup_maple_ide); diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c new file mode 100644 index 00000000000..7ece8983a10 --- /dev/null +++ b/arch/powerpc/platforms/maple/setup.c @@ -0,0 +1,295 @@ +/* + * Maple (970 eval board) setup code + * + * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#define DEBUG + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/tty.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/major.h> +#include <linux/initrd.h> +#include <linux/vt_kern.h> +#include <linux/console.h> +#include <linux/ide.h> +#include <linux/pci.h> +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/serial.h> +#include <linux/smp.h> + +#include <asm/processor.h> +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/bitops.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/machdep.h> +#include <asm/dma.h> +#include <asm/cputable.h> +#include <asm/time.h> +#include <asm/of_device.h> +#include <asm/lmb.h> +#include <asm/mpic.h> +#include <asm/udbg.h> + +#include "maple.h" + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +extern void generic_find_legacy_serial_ports(u64 *physport, + unsigned int *default_speed); + +static void maple_restart(char *cmd) +{ + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Restart Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "restart-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "restart-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; +} + +static void maple_power_off(void) +{ + unsigned int maple_nvram_base; + unsigned int maple_nvram_offset; + unsigned int maple_nvram_command; + struct device_node *rtcs; + + /* find NVRAM device */ + rtcs = find_compatible_devices("nvram", "AMD8111"); + if (rtcs && rtcs->addrs) { + maple_nvram_base = rtcs->addrs[0].address; + } else { + printk(KERN_EMERG "Maple: Unable to find NVRAM\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + + /* find service processor device */ + rtcs = find_devices("service-processor"); + if (!rtcs) { + printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); + printk(KERN_EMERG "Maple: Manual Power-Down Required\n"); + return; + } + maple_nvram_offset = *(unsigned int*) get_property(rtcs, + "power-off-addr", NULL); + maple_nvram_command = *(unsigned int*) get_property(rtcs, + "power-off-value", NULL); + + /* send command */ + outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset); + for (;;) ; +} + +static void maple_halt(void) +{ + maple_power_off(); +} + +#ifdef CONFIG_SMP +struct smp_ops_t maple_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .kick_cpu = smp_generic_kick_cpu, + .setup_cpu = smp_mpic_setup_cpu, + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +}; +#endif /* CONFIG_SMP */ + +void __init maple_setup_arch(void) +{ + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + /* Setup SMP callback */ +#ifdef CONFIG_SMP + smp_ops = &maple_smp_ops; +#endif + /* Lookup PCI hosts */ + maple_pci_init(); + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + printk(KERN_INFO "Using native/NAP idle loop\n"); +} + +/* + * Early initialization. + */ +static void __init maple_init_early(void) +{ + unsigned int default_speed; + u64 physport; + + DBG(" -> maple_init_early\n"); + + /* Initialize hash table, from now on, we can take hash faults + * and call ioremap + */ + hpte_init_native(); + + /* Find the serial port */ + generic_find_legacy_serial_ports(&physport, &default_speed); + + DBG("phys port addr: %lx\n", (long)physport); + + if (physport) { + void *comport; + /* Map the uart for udbg. */ + comport = (void *)ioremap(physport, 16); + udbg_init_uart(comport, default_speed); + + DBG("Hello World !\n"); + } + + /* Setup interrupt mapping options */ + ppc64_interrupt_controller = IC_OPEN_PIC; + + iommu_init_early_u3(); + + DBG(" <- maple_init_early\n"); +} + + +static __init void maple_init_IRQ(void) +{ + struct device_node *root; + unsigned int *opprop; + unsigned long opic_addr; + struct mpic *mpic; + unsigned char senses[128]; + int n; + + DBG(" -> maple_init_IRQ\n"); + + /* XXX: Non standard, replace that with a proper openpic/mpic node + * in the device-tree. Find the Open PIC if present */ + root = of_find_node_by_path("/"); + opprop = (unsigned int *) get_property(root, + "platform-open-pic", NULL); + if (opprop == 0) + panic("OpenPIC not found !\n"); + + n = prom_n_addr_cells(root); + for (opic_addr = 0; n > 0; --n) + opic_addr = (opic_addr << 32) + *opprop++; + of_node_put(root); + + /* Obtain sense values from device-tree */ + prom_get_irq_senses(senses, 0, 128); + + mpic = mpic_alloc(opic_addr, + MPIC_PRIMARY | MPIC_BIG_ENDIAN | + MPIC_BROKEN_U3 | MPIC_WANTS_RESET, + 0, 0, 128, 128, senses, 128, "U3-MPIC"); + BUG_ON(mpic == NULL); + mpic_init(mpic); + + DBG(" <- maple_init_IRQ\n"); +} + +static void __init maple_progress(char *s, unsigned short hex) +{ + printk("*** %04x : %s\n", hex, s ? s : ""); +} + + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init maple_probe(int platform) +{ + if (platform != PLATFORM_MAPLE) + return 0; + /* + * On U3, the DART (iommu) must be allocated now since it + * has an impact on htab_initialize (due to the large page it + * occupies having to be broken up so the DART itself is not + * part of the cacheable linar mapping + */ + alloc_u3_dart_table(); + + return 1; +} + +struct machdep_calls __initdata maple_md = { + .probe = maple_probe, + .setup_arch = maple_setup_arch, + .init_early = maple_init_early, + .init_IRQ = maple_init_IRQ, + .get_irq = mpic_get_irq, + .pcibios_fixup = maple_pcibios_fixup, + .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq, + .restart = maple_restart, + .power_off = maple_power_off, + .halt = maple_halt, + .get_boot_time = maple_get_boot_time, + .set_rtc_time = maple_set_rtc_time, + .get_rtc_time = maple_get_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = maple_progress, + .idle_loop = native_idle, +}; diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c new file mode 100644 index 00000000000..40fc07a8e60 --- /dev/null +++ b/arch/powerpc/platforms/maple/time.c @@ -0,0 +1,180 @@ +/* + * arch/ppc64/kernel/maple_time.c + * + * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#undef DEBUG + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> +#include <linux/bcd.h> + +#include <asm/sections.h> +#include <asm/prom.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/machdep.h> +#include <asm/time.h> + +#include "maple.h" + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +extern void GregorianDay(struct rtc_time * tm); + +static int maple_rtc_addr; + +static int maple_clock_read(int addr) +{ + outb_p(addr, maple_rtc_addr); + return inb_p(maple_rtc_addr+1); +} + +static void maple_clock_write(unsigned long val, int addr) +{ + outb_p(addr, maple_rtc_addr); + outb_p(val, maple_rtc_addr+1); +} + +void maple_get_rtc_time(struct rtc_time *tm) +{ + int uip, i; + + /* The Linux interpretation of the CMOS clock register contents: + * When the Update-In-Progress (UIP) flag goes from 1 to 0, the + * RTC registers show the second which has precisely just started. + * Let's hope other operating systems interpret the RTC the same way. + */ + + /* Since the UIP flag is set for about 2.2 ms and the clock + * is typically written with a precision of 1 jiffy, trying + * to obtain a precision better than a few milliseconds is + * an illusion. Only consistency is interesting, this also + * allows to use the routine for /dev/rtc without a potential + * 1 second kernel busy loop triggered by any reader of /dev/rtc. + */ + + for (i = 0; i<1000000; i++) { + uip = maple_clock_read(RTC_FREQ_SELECT); + tm->tm_sec = maple_clock_read(RTC_SECONDS); + tm->tm_min = maple_clock_read(RTC_MINUTES); + tm->tm_hour = maple_clock_read(RTC_HOURS); + tm->tm_mday = maple_clock_read(RTC_DAY_OF_MONTH); + tm->tm_mon = maple_clock_read(RTC_MONTH); + tm->tm_year = maple_clock_read(RTC_YEAR); + uip |= maple_clock_read(RTC_FREQ_SELECT); + if ((uip & RTC_UIP)==0) + break; + } + + if (!(maple_clock_read(RTC_CONTROL) & RTC_DM_BINARY) + || RTC_ALWAYS_BCD) { + BCD_TO_BIN(tm->tm_sec); + BCD_TO_BIN(tm->tm_min); + BCD_TO_BIN(tm->tm_hour); + BCD_TO_BIN(tm->tm_mday); + BCD_TO_BIN(tm->tm_mon); + BCD_TO_BIN(tm->tm_year); + } + if ((tm->tm_year + 1900) < 1970) + tm->tm_year += 100; + + GregorianDay(tm); +} + +int maple_set_rtc_time(struct rtc_time *tm) +{ + unsigned char save_control, save_freq_select; + int sec, min, hour, mon, mday, year; + + spin_lock(&rtc_lock); + + save_control = maple_clock_read(RTC_CONTROL); /* tell the clock it's being set */ + + maple_clock_write((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = maple_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ + + maple_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + sec = tm->tm_sec; + min = tm->tm_min; + hour = tm->tm_hour; + mon = tm->tm_mon; + mday = tm->tm_mday; + year = tm->tm_year; + + if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { + BIN_TO_BCD(sec); + BIN_TO_BCD(min); + BIN_TO_BCD(hour); + BIN_TO_BCD(mon); + BIN_TO_BCD(mday); + BIN_TO_BCD(year); + } + maple_clock_write(sec, RTC_SECONDS); + maple_clock_write(min, RTC_MINUTES); + maple_clock_write(hour, RTC_HOURS); + maple_clock_write(mon, RTC_MONTH); + maple_clock_write(mday, RTC_DAY_OF_MONTH); + maple_clock_write(year, RTC_YEAR); + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + maple_clock_write(save_control, RTC_CONTROL); + maple_clock_write(save_freq_select, RTC_FREQ_SELECT); + + spin_unlock(&rtc_lock); + + return 0; +} + +unsigned long __init maple_get_boot_time(void) +{ + struct rtc_time tm; + struct device_node *rtcs; + + rtcs = find_compatible_devices("rtc", "pnpPNP,b00"); + if (rtcs && rtcs->addrs) { + maple_rtc_addr = rtcs->addrs[0].address; + printk(KERN_INFO "Maple: Found RTC at 0x%x\n", maple_rtc_addr); + } else { + maple_rtc_addr = RTC_PORT(0); /* legacy address */ + printk(KERN_INFO "Maple: No device node for RTC, assuming " + "legacy address (0x%x)\n", maple_rtc_addr); + } + + maple_get_rtc_time(&tm); + return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); +} + |