diff options
Diffstat (limited to 'arch/powerpc/platforms')
| -rw-r--r-- | arch/powerpc/platforms/powermac/setup.c | 41 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powermac/smp.c | 166 |
2 files changed, 110 insertions, 97 deletions
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 86f69a4eb49..c2052265636 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -103,11 +103,6 @@ unsigned long smu_cmdbuf_abs; EXPORT_SYMBOL(smu_cmdbuf_abs); #endif -#ifdef CONFIG_SMP -extern struct smp_ops_t psurge_smp_ops; -extern struct smp_ops_t core99_smp_ops; -#endif /* CONFIG_SMP */ - static void pmac_show_cpuinfo(struct seq_file *m) { struct device_node *np; @@ -341,34 +336,6 @@ static void __init pmac_setup_arch(void) ROOT_DEV = DEFAULT_ROOT_DEVICE; #endif -#ifdef CONFIG_SMP - /* Check for Core99 */ - ic = of_find_node_by_name(NULL, "uni-n"); - if (!ic) - ic = of_find_node_by_name(NULL, "u3"); - if (!ic) - ic = of_find_node_by_name(NULL, "u4"); - if (ic) { - of_node_put(ic); - smp_ops = &core99_smp_ops; - } -#ifdef CONFIG_PPC32 - else { - /* - * We have to set bits in cpu_possible_map here since the - * secondary CPU(s) aren't in the device tree, and - * setup_per_cpu_areas only allocates per-cpu data for - * CPUs in the cpu_possible_map. - */ - int cpu; - - for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) - cpu_set(cpu, cpu_possible_map); - smp_ops = &psurge_smp_ops; - } -#endif -#endif /* CONFIG_SMP */ - #ifdef CONFIG_ADB if (strstr(cmd_line, "adb_sync")) { extern int __adb_probe_sync; @@ -512,6 +479,14 @@ static void __init pmac_init_early(void) #ifdef CONFIG_PPC64 iommu_init_early_dart(); #endif + + /* SMP Init has to be done early as we need to patch up + * cpu_possible_map before interrupt stacks are allocated + * or kaboom... + */ +#ifdef CONFIG_SMP + pmac_setup_smp(); +#endif } static int __init pmac_declare_of_platform_devices(void) diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index cf1dbe75889..6d4da7b46b4 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -64,10 +64,11 @@ extern void __secondary_start_pmac_0(void); extern int pmac_pfunc_base_install(void); -#ifdef CONFIG_PPC32 +static void (*pmac_tb_freeze)(int freeze); +static u64 timebase; +static int tb_req; -/* Sync flag for HW tb sync */ -static volatile int sec_tb_reset = 0; +#ifdef CONFIG_PPC32 /* * Powersurge (old powermac SMP) support. @@ -294,6 +295,9 @@ static int __init smp_psurge_probe(void) psurge_quad_init(); /* All released cards using this HW design have 4 CPUs */ ncpus = 4; + /* No sure how timebase sync works on those, let's use SW */ + smp_ops->give_timebase = smp_generic_give_timebase; + smp_ops->take_timebase = smp_generic_take_timebase; } else { iounmap(quad_base); if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) { @@ -308,18 +312,15 @@ static int __init smp_psurge_probe(void) psurge_start = ioremap(PSURGE_START, 4); psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4); - /* - * This is necessary because OF doesn't know about the + /* This is necessary because OF doesn't know about the * secondary cpu(s), and thus there aren't nodes in the * device tree for them, and smp_setup_cpu_maps hasn't - * set their bits in cpu_possible_map and cpu_present_map. + * set their bits in cpu_present_map. */ if (ncpus > NR_CPUS) ncpus = NR_CPUS; - for (i = 1; i < ncpus ; ++i) { + for (i = 1; i < ncpus ; ++i) cpu_set(i, cpu_present_map); - set_hard_smp_processor_id(i, i); - } if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352); @@ -329,8 +330,14 @@ static int __init smp_psurge_probe(void) static void __init smp_psurge_kick_cpu(int nr) { unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8; - unsigned long a; - int i; + unsigned long a, flags; + int i, j; + + /* Defining this here is evil ... but I prefer hiding that + * crap to avoid giving people ideas that they can do the + * same. + */ + extern volatile unsigned int cpu_callin_map[NR_CPUS]; /* may need to flush here if secondary bats aren't setup */ for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32) @@ -339,47 +346,52 @@ static void __init smp_psurge_kick_cpu(int nr) if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353); + /* This is going to freeze the timeebase, we disable interrupts */ + local_irq_save(flags); + out_be32(psurge_start, start); mb(); psurge_set_ipi(nr); + /* * We can't use udelay here because the timebase is now frozen. */ for (i = 0; i < 2000; ++i) - barrier(); + asm volatile("nop" : : : "memory"); psurge_clr_ipi(nr); - if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); -} - -/* - * With the dual-cpu powersurge board, the decrementers and timebases - * of both cpus are frozen after the secondary cpu is started up, - * until we give the secondary cpu another interrupt. This routine - * uses this to get the timebases synchronized. - * -- paulus. - */ -static void __init psurge_dual_sync_tb(int cpu_nr) -{ - int t; - - set_dec(tb_ticks_per_jiffy); - /* XXX fixme */ - set_tb(0, 0); - - if (cpu_nr > 0) { + /* + * Also, because the timebase is frozen, we must not return to the + * caller which will try to do udelay's etc... Instead, we wait -here- + * for the CPU to callin. + */ + for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) { + for (j = 1; j < 10000; j++) + asm volatile("nop" : : : "memory"); + asm volatile("sync" : : : "memory"); + } + if (!cpu_callin_map[nr]) + goto stuck; + + /* And we do the TB sync here too for standard dual CPU cards */ + if (psurge_type == PSURGE_DUAL) { + while(!tb_req) + barrier(); + tb_req = 0; + mb(); + timebase = get_tb(); + mb(); + while (timebase) + barrier(); mb(); - sec_tb_reset = 1; - return; } + stuck: + /* now interrupt the secondary, restarting both TBs */ + if (psurge_type == PSURGE_DUAL) + psurge_set_ipi(1); - /* wait for the secondary to have reset its TB before proceeding */ - for (t = 10000000; t > 0 && !sec_tb_reset; --t) - ; - - /* now interrupt the secondary, starting both TBs */ - psurge_set_ipi(1); + if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354); } static struct irqaction psurge_irqaction = { @@ -390,36 +402,35 @@ static struct irqaction psurge_irqaction = { static void __init smp_psurge_setup_cpu(int cpu_nr) { + if (cpu_nr != 0) + return; - if (cpu_nr == 0) { - /* If we failed to start the second CPU, we should still - * send it an IPI to start the timebase & DEC or we might - * have them stuck. - */ - if (num_online_cpus() < 2) { - if (psurge_type == PSURGE_DUAL) - psurge_set_ipi(1); - return; - } - /* reset the entry point so if we get another intr we won't - * try to startup again */ - out_be32(psurge_start, 0x100); - if (setup_irq(30, &psurge_irqaction)) - printk(KERN_ERR "Couldn't get primary IPI interrupt"); - } - - if (psurge_type == PSURGE_DUAL) - psurge_dual_sync_tb(cpu_nr); + /* reset the entry point so if we get another intr we won't + * try to startup again */ + out_be32(psurge_start, 0x100); + if (setup_irq(30, &psurge_irqaction)) + printk(KERN_ERR "Couldn't get primary IPI interrupt"); } void __init smp_psurge_take_timebase(void) { - /* Dummy implementation */ + if (psurge_type != PSURGE_DUAL) + return; + + tb_req = 1; + mb(); + while (!timebase) + barrier(); + mb(); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + mb(); + set_dec(tb_ticks_per_jiffy/2); } void __init smp_psurge_give_timebase(void) { - /* Dummy implementation */ + /* Nothing to do here */ } /* PowerSurge-style Macs */ @@ -437,9 +448,6 @@ struct smp_ops_t psurge_smp_ops = { * Core 99 and later support */ -static void (*pmac_tb_freeze)(int freeze); -static u64 timebase; -static int tb_req; static void smp_core99_give_timebase(void) { @@ -478,7 +486,6 @@ static void __devinit smp_core99_take_timebase(void) set_tb(timebase >> 32, timebase & 0xffffffff); timebase = 0; mb(); - set_dec(tb_ticks_per_jiffy/2); local_irq_restore(flags); } @@ -920,3 +927,34 @@ struct smp_ops_t core99_smp_ops = { # endif #endif }; + +void __init pmac_setup_smp(void) +{ + struct device_node *np; + + /* Check for Core99 */ + np = of_find_node_by_name(NULL, "uni-n"); + if (!np) + np = of_find_node_by_name(NULL, "u3"); + if (!np) + np = of_find_node_by_name(NULL, "u4"); + if (np) { + of_node_put(np); + smp_ops = &core99_smp_ops; + } +#ifdef CONFIG_PPC32 + else { + /* We have to set bits in cpu_possible_map here since the + * secondary CPU(s) aren't in the device tree. Various + * things won't be initialized for CPUs not in the possible + * map, so we really need to fix it up here. + */ + int cpu; + + for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu) + cpu_set(cpu, cpu_possible_map); + smp_ops = &psurge_smp_ops; + } +#endif /* CONFIG_PPC32 */ +} + |