diff options
Diffstat (limited to 'arch/powerpc/sysdev/commproc.c')
-rw-r--r-- | arch/powerpc/sysdev/commproc.c | 299 |
1 files changed, 255 insertions, 44 deletions
diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c index dd5417aec1b..f6a63780bbd 100644 --- a/arch/powerpc/sysdev/commproc.c +++ b/arch/powerpc/sysdev/commproc.c @@ -39,18 +39,21 @@ #include <asm/tlbflush.h> #include <asm/rheap.h> #include <asm/prom.h> +#include <asm/cpm.h> #include <asm/fs_pd.h> #define CPM_MAP_SIZE (0x4000) +#ifndef CONFIG_PPC_CPM_NEW_BINDING static void m8xx_cpm_dpinit(void); -static uint host_buffer; /* One page of host buffer */ -static uint host_end; /* end + 1 */ -cpm8xx_t *cpmp; /* Pointer to comm processor space */ -cpic8xx_t *cpic_reg; +#endif +static uint host_buffer; /* One page of host buffer */ +static uint host_end; /* end + 1 */ +cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ +immap_t __iomem *mpc8xx_immr; +static cpic8xx_t __iomem *cpic_reg; -static struct device_node *cpm_pic_node; static struct irq_host *cpm_pic_host; static void cpm_mask_irq(unsigned int irq) @@ -95,11 +98,6 @@ int cpm_get_irq(void) return irq_linear_revmap(cpm_pic_host, cpm_vec); } -static int cpm_pic_host_match(struct irq_host *h, struct device_node *node) -{ - return cpm_pic_node == node; -} - static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { @@ -115,7 +113,7 @@ static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, * and return. This is a no-op function so we don't need any special * tests in the interrupt handler. */ -static irqreturn_t cpm_error_interrupt(int irq, void *dev) +static irqreturn_t cpm_error_interrupt(int irq, void *dev) { return IRQ_HANDLED; } @@ -127,7 +125,6 @@ static struct irqaction cpm_error_irqaction = { }; static struct irq_host_ops cpm_pic_host_ops = { - .match = cpm_pic_host_match, .map = cpm_pic_host_map, }; @@ -140,16 +137,19 @@ unsigned int cpm_pic_init(void) pr_debug("cpm_pic_init\n"); - np = of_find_compatible_node(NULL, "cpm-pic", "CPM"); + np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic"); + if (np == NULL) + np = of_find_compatible_node(NULL, "cpm-pic", "CPM"); if (np == NULL) { printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n"); return sirq; } + ret = of_address_to_resource(np, 0, &res); if (ret) goto end; - cpic_reg = (void *)ioremap(res.start, res.end - res.start + 1); + cpic_reg = ioremap(res.start, res.end - res.start + 1); if (cpic_reg == NULL) goto end; @@ -165,23 +165,24 @@ unsigned int cpm_pic_init(void) out_be32(&cpic_reg->cpic_cimr, 0); - cpm_pic_node = of_node_get(np); - - cpm_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm_pic_host_ops, 64); + cpm_pic_host = irq_alloc_host(of_node_get(np), IRQ_HOST_MAP_LINEAR, + 64, &cpm_pic_host_ops, 64); if (cpm_pic_host == NULL) { printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n"); sirq = NO_IRQ; goto end; } - of_node_put(np); /* Install our own error handler. */ - np = of_find_node_by_type(NULL, "cpm"); + np = of_find_compatible_node(NULL, NULL, "fsl,cpm1"); + if (np == NULL) + np = of_find_node_by_type(NULL, "cpm"); if (np == NULL) { printk(KERN_ERR "CPM PIC init: can not find cpm node\n"); goto end; } - eirq= irq_of_parse_and_map(np, 0); + + eirq = irq_of_parse_and_map(np, 0); if (eirq == NO_IRQ) goto end; @@ -195,23 +196,30 @@ end: return sirq; } -void cpm_reset(void) +void __init cpm_reset(void) { - cpm8xx_t *commproc; - sysconf8xx_t *siu_conf; + sysconf8xx_t __iomem *siu_conf; - commproc = (cpm8xx_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); + mpc8xx_immr = ioremap(get_immrbase(), 0x4000); + if (!mpc8xx_immr) { + printk(KERN_CRIT "Could not map IMMR\n"); + return; + } -#ifdef CONFIG_UCODE_PATCH + cpmp = &mpc8xx_immr->im_cpm; + +#ifndef CONFIG_PPC_EARLY_DEBUG_CPM /* Perform a reset. */ - out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); + out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG); /* Wait for it. */ - while (in_be16(&commproc->cp_cpcr) & CPM_CR_FLG); + while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG); +#endif - cpm_load_patch(commproc); +#ifdef CONFIG_UCODE_PATCH + cpm_load_patch(cpmp); #endif /* Set SDMA Bus Request priority 5. @@ -220,16 +228,16 @@ void cpm_reset(void) * manual recommends it. * Bit 25, FAM can also be set to use FEC aggressive mode (860T). */ - siu_conf = (sysconf8xx_t*)immr_map(im_siu_conf); + siu_conf = immr_map(im_siu_conf); out_be32(&siu_conf->sc_sdcr, 1); immr_unmap(siu_conf); +#ifdef CONFIG_PPC_CPM_NEW_BINDING + cpm_muram_init(); +#else /* Reclaim the DP memory for our use. */ m8xx_cpm_dpinit(); - - /* Tell everyone where the comm processor resides. - */ - cpmp = commproc; +#endif } /* We used to do this earlier, but have to postpone as long as possible @@ -279,22 +287,23 @@ m8xx_cpm_hostalloc(uint size) void cpm_setbrg(uint brg, uint rate) { - volatile uint *bp; + u32 __iomem *bp; /* This is good enough to get SMCs running..... */ - bp = (uint *)&cpmp->cp_brgc1; + bp = &cpmp->cp_brgc1; bp += brg; /* The BRG has a 12-bit counter. For really slow baud rates (or * really fast processors), we may have to further divide by 16. */ if (((BRG_UART_CLK / rate) - 1) < 4096) - *bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN; + out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); else - *bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) | - CPM_BRG_EN | CPM_BRG_DIV16; + out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) | + CPM_BRG_EN | CPM_BRG_DIV16); } +#ifndef CONFIG_PPC_CPM_NEW_BINDING /* * dpalloc / dpfree bits. */ @@ -307,15 +316,15 @@ static rh_block_t cpm_boot_dpmem_rh_block[16]; static rh_info_t cpm_dpmem_info; #define CPM_DPMEM_ALIGNMENT 8 -static u8* dpram_vbase; -static uint dpram_pbase; +static u8 __iomem *dpram_vbase; +static phys_addr_t dpram_pbase; -void m8xx_cpm_dpinit(void) +static void m8xx_cpm_dpinit(void) { spin_lock_init(&cpm_dpmem_lock); - dpram_vbase = immr_map_size(im_cpm.cp_dpmem, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE); - dpram_pbase = (uint)&((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem; + dpram_vbase = cpmp->cp_dpmem; + dpram_pbase = get_immrbase() + offsetof(immap_t, im_cpm.cp_dpmem); /* Initialize the info header */ rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT, @@ -391,8 +400,210 @@ void *cpm_dpram_addr(unsigned long offset) } EXPORT_SYMBOL(cpm_dpram_addr); -uint cpm_dpram_phys(u8* addr) +uint cpm_dpram_phys(u8 *addr) { return (dpram_pbase + (uint)(addr - dpram_vbase)); } EXPORT_SYMBOL(cpm_dpram_phys); +#endif /* !CONFIG_PPC_CPM_NEW_BINDING */ + +struct cpm_ioport16 { + __be16 dir, par, sor, dat, intr; + __be16 res[3]; +}; + +struct cpm_ioport32 { + __be32 dir, par, sor; +}; + +static void cpm1_set_pin32(int port, int pin, int flags) +{ + struct cpm_ioport32 __iomem *iop; + pin = 1 << (31 - pin); + + if (port == CPM_PORTB) + iop = (struct cpm_ioport32 __iomem *) + &mpc8xx_immr->im_cpm.cp_pbdir; + else + iop = (struct cpm_ioport32 __iomem *) + &mpc8xx_immr->im_cpm.cp_pedir; + + if (flags & CPM_PIN_OUTPUT) + setbits32(&iop->dir, pin); + else + clrbits32(&iop->dir, pin); + + if (!(flags & CPM_PIN_GPIO)) + setbits32(&iop->par, pin); + else + clrbits32(&iop->par, pin); + + if (port == CPM_PORTE) { + if (flags & CPM_PIN_SECONDARY) + setbits32(&iop->sor, pin); + else + clrbits32(&iop->sor, pin); + + if (flags & CPM_PIN_OPENDRAIN) + setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); + else + clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin); + } +} + +static void cpm1_set_pin16(int port, int pin, int flags) +{ + struct cpm_ioport16 __iomem *iop = + (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport; + + pin = 1 << (15 - pin); + + if (port != 0) + iop += port - 1; + + if (flags & CPM_PIN_OUTPUT) + setbits16(&iop->dir, pin); + else + clrbits16(&iop->dir, pin); + + if (!(flags & CPM_PIN_GPIO)) + setbits16(&iop->par, pin); + else + clrbits16(&iop->par, pin); + + if (port == CPM_PORTC) { + if (flags & CPM_PIN_SECONDARY) + setbits16(&iop->sor, pin); + else + clrbits16(&iop->sor, pin); + } +} + +void cpm1_set_pin(enum cpm_port port, int pin, int flags) +{ + if (port == CPM_PORTB || port == CPM_PORTE) + cpm1_set_pin32(port, pin, flags); + else + cpm1_set_pin16(port, pin, flags); +} + +int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) +{ + int shift; + int i, bits = 0; + u32 __iomem *reg; + u32 mask = 7; + + u8 clk_map[][3] = { + {CPM_CLK_SCC1, CPM_BRG1, 0}, + {CPM_CLK_SCC1, CPM_BRG2, 1}, + {CPM_CLK_SCC1, CPM_BRG3, 2}, + {CPM_CLK_SCC1, CPM_BRG4, 3}, + {CPM_CLK_SCC1, CPM_CLK1, 4}, + {CPM_CLK_SCC1, CPM_CLK2, 5}, + {CPM_CLK_SCC1, CPM_CLK3, 6}, + {CPM_CLK_SCC1, CPM_CLK4, 7}, + + {CPM_CLK_SCC2, CPM_BRG1, 0}, + {CPM_CLK_SCC2, CPM_BRG2, 1}, + {CPM_CLK_SCC2, CPM_BRG3, 2}, + {CPM_CLK_SCC2, CPM_BRG4, 3}, + {CPM_CLK_SCC2, CPM_CLK1, 4}, + {CPM_CLK_SCC2, CPM_CLK2, 5}, + {CPM_CLK_SCC2, CPM_CLK3, 6}, + {CPM_CLK_SCC2, CPM_CLK4, 7}, + + {CPM_CLK_SCC3, CPM_BRG1, 0}, + {CPM_CLK_SCC3, CPM_BRG2, 1}, + {CPM_CLK_SCC3, CPM_BRG3, 2}, + {CPM_CLK_SCC3, CPM_BRG4, 3}, + {CPM_CLK_SCC3, CPM_CLK5, 4}, + {CPM_CLK_SCC3, CPM_CLK6, 5}, + {CPM_CLK_SCC3, CPM_CLK7, 6}, + {CPM_CLK_SCC3, CPM_CLK8, 7}, + + {CPM_CLK_SCC4, CPM_BRG1, 0}, + {CPM_CLK_SCC4, CPM_BRG2, 1}, + {CPM_CLK_SCC4, CPM_BRG3, 2}, + {CPM_CLK_SCC4, CPM_BRG4, 3}, + {CPM_CLK_SCC4, CPM_CLK5, 4}, + {CPM_CLK_SCC4, CPM_CLK6, 5}, + {CPM_CLK_SCC4, CPM_CLK7, 6}, + {CPM_CLK_SCC4, CPM_CLK8, 7}, + + {CPM_CLK_SMC1, CPM_BRG1, 0}, + {CPM_CLK_SMC1, CPM_BRG2, 1}, + {CPM_CLK_SMC1, CPM_BRG3, 2}, + {CPM_CLK_SMC1, CPM_BRG4, 3}, + {CPM_CLK_SMC1, CPM_CLK1, 4}, + {CPM_CLK_SMC1, CPM_CLK2, 5}, + {CPM_CLK_SMC1, CPM_CLK3, 6}, + {CPM_CLK_SMC1, CPM_CLK4, 7}, + + {CPM_CLK_SMC2, CPM_BRG1, 0}, + {CPM_CLK_SMC2, CPM_BRG2, 1}, + {CPM_CLK_SMC2, CPM_BRG3, 2}, + {CPM_CLK_SMC2, CPM_BRG4, 3}, + {CPM_CLK_SMC2, CPM_CLK5, 4}, + {CPM_CLK_SMC2, CPM_CLK6, 5}, + {CPM_CLK_SMC2, CPM_CLK7, 6}, + {CPM_CLK_SMC2, CPM_CLK8, 7}, + }; + + switch (target) { + case CPM_CLK_SCC1: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 0; + break; + + case CPM_CLK_SCC2: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 8; + break; + + case CPM_CLK_SCC3: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 16; + break; + + case CPM_CLK_SCC4: + reg = &mpc8xx_immr->im_cpm.cp_sicr; + shift = 24; + break; + + case CPM_CLK_SMC1: + reg = &mpc8xx_immr->im_cpm.cp_simode; + shift = 12; + break; + + case CPM_CLK_SMC2: + reg = &mpc8xx_immr->im_cpm.cp_simode; + shift = 28; + break; + + default: + printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n"); + return -EINVAL; + } + + if (reg == &mpc8xx_immr->im_cpm.cp_sicr && mode == CPM_CLK_RX) + shift += 3; + + for (i = 0; i < ARRAY_SIZE(clk_map); i++) { + if (clk_map[i][0] == target && clk_map[i][1] == clock) { + bits = clk_map[i][2]; + break; + } + } + + if (i == ARRAY_SIZE(clk_map)) { + printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n"); + return -EINVAL; + } + + bits <<= shift; + mask <<= shift; + out_be32(reg, (in_be32(reg) & ~mask) | bits); + + return 0; +} |