diff options
Diffstat (limited to 'arch/powerpc/sysdev/fsl_pci.c')
-rw-r--r-- | arch/powerpc/sysdev/fsl_pci.c | 157 |
1 files changed, 97 insertions, 60 deletions
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index c37f4613632..ffb93ae9379 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -38,15 +38,15 @@ static int fsl_pcie_bus_fixup, is_mpc83xx_pci; static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev) { - u8 progif; + u8 hdr_type; /* if we aren't a PCIe don't bother */ if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) return; /* if we aren't in host mode don't bother */ - pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); - if (progif & 0x1) + pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type); + if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) return; dev->class = PCI_CLASS_BRIDGE_PCI << 8; @@ -143,18 +143,20 @@ static void __init setup_pci_atmu(struct pci_controller *hose, pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", (u64)rsrc->start, (u64)resource_size(rsrc)); - if (of_device_is_compatible(hose->dn, "fsl,qoriq-pcie-v2.2")) { - win_idx = 2; - start_idx = 0; - end_idx = 3; - } - pci = ioremap(rsrc->start, resource_size(rsrc)); if (!pci) { dev_err(hose->parent, "Unable to map ATMU registers\n"); return; } + if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { + if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) { + win_idx = 2; + start_idx = 0; + end_idx = 3; + } + } + /* Disable all windows (except powar0 since it's ignored) */ for(i = 1; i < 5; i++) out_be32(&pci->pow[i].powar, 0); @@ -425,7 +427,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) struct pci_controller *hose; struct resource rsrc; const int *bus_range; - u8 progif; + u8 hdr_type, progif; if (!of_device_is_available(dev)) { pr_warning("%s: disabled\n", dev->full_name); @@ -457,15 +459,17 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, PPC_INDIRECT_TYPE_BIG_ENDIAN); - early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif); - if ((progif & 1) == 1) { - /* unmap cfg_data & cfg_addr separately if not on same page */ - if (((unsigned long)hose->cfg_data & PAGE_MASK) != - ((unsigned long)hose->cfg_addr & PAGE_MASK)) - iounmap(hose->cfg_data); - iounmap(hose->cfg_addr); - pcibios_free_controller(hose); - return -ENODEV; + if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { + /* For PCIE read HEADER_TYPE to identify controler mode */ + early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type); + if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) + goto no_bridge; + + } else { + /* For PCI read PROG to identify controller mode */ + early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif); + if ((progif & 1) == 1) + goto no_bridge; } setup_pci_cmd(hose); @@ -494,6 +498,15 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) setup_pci_atmu(hose, &rsrc); return 0; + +no_bridge: + /* unmap cfg_data & cfg_addr separately if not on same page */ + if (((unsigned long)hose->cfg_data & PAGE_MASK) != + ((unsigned long)hose->cfg_addr & PAGE_MASK)) + iounmap(hose->cfg_data); + iounmap(hose->cfg_addr); + pcibios_free_controller(hose); + return -ENODEV; } #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ @@ -818,6 +831,7 @@ static const struct of_device_id pci_ids[] = { { .compatible = "fsl,p1010-pcie", }, { .compatible = "fsl,p1023-pcie", }, { .compatible = "fsl,p4080-pcie", }, + { .compatible = "fsl,qoriq-pcie-v2.4", }, { .compatible = "fsl,qoriq-pcie-v2.3", }, { .compatible = "fsl,qoriq-pcie-v2.2", }, {}, @@ -825,57 +839,80 @@ static const struct of_device_id pci_ids[] = { struct device_node *fsl_pci_primary; -void __devinit fsl_pci_init(void) +void fsl_pci_assign_primary(void) { - int ret; - struct device_node *node; - struct pci_controller *hose; - dma_addr_t max = 0xffffffff; + struct device_node *np; /* Callers can specify the primary bus using other means. */ - if (!fsl_pci_primary) { - /* If a PCI host bridge contains an ISA node, it's primary. */ - node = of_find_node_by_type(NULL, "isa"); - while ((fsl_pci_primary = of_get_parent(node))) { - of_node_put(node); - node = fsl_pci_primary; - - if (of_match_node(pci_ids, node)) - break; - } + if (fsl_pci_primary) + return; + + /* If a PCI host bridge contains an ISA node, it's primary. */ + np = of_find_node_by_type(NULL, "isa"); + while ((fsl_pci_primary = of_get_parent(np))) { + of_node_put(np); + np = fsl_pci_primary; + + if (of_match_node(pci_ids, np) && of_device_is_available(np)) + return; } - node = NULL; - for_each_node_by_type(node, "pci") { - if (of_match_node(pci_ids, node)) { - /* - * If there's no PCI host bridge with ISA, arbitrarily - * designate one as primary. This can go away once - * various bugs with primary-less systems are fixed. - */ - if (!fsl_pci_primary) - fsl_pci_primary = node; - - ret = fsl_add_bridge(node, fsl_pci_primary == node); - if (ret == 0) { - hose = pci_find_hose_for_OF_device(node); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); - } + /* + * If there's no PCI host bridge with ISA, arbitrarily + * designate one as primary. This can go away once + * various bugs with primary-less systems are fixed. + */ + for_each_matching_node(np, pci_ids) { + if (of_device_is_available(np)) { + fsl_pci_primary = np; + of_node_put(np); + return; } } +} +static int __devinit fsl_pci_probe(struct platform_device *pdev) +{ + int ret; + struct device_node *node; #ifdef CONFIG_SWIOTLB - /* - * if we couldn't map all of DRAM via the dma windows - * we need SWIOTLB to handle buffers located outside of - * dma capable memory region - */ - if (memblock_end_of_DRAM() - 1 > max) { - ppc_swiotlb_enable = 1; - set_pci_dma_ops(&swiotlb_dma_ops); - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; + struct pci_controller *hose; +#endif + + node = pdev->dev.of_node; + ret = fsl_add_bridge(node, fsl_pci_primary == node); + +#ifdef CONFIG_SWIOTLB + if (ret == 0) { + hose = pci_find_hose_for_OF_device(pdev->dev.of_node); + + /* + * if we couldn't map all of DRAM via the dma windows + * we need SWIOTLB to handle buffers located outside of + * dma capable memory region + */ + if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur + + hose->dma_window_size) + ppc_swiotlb_enable = 1; } #endif + + mpc85xx_pci_err_probe(pdev); + + return 0; +} + +static struct platform_driver fsl_pci_driver = { + .driver = { + .name = "fsl-pci", + .of_match_table = pci_ids, + }, + .probe = fsl_pci_probe, +}; + +static int __init fsl_pci_init(void) +{ + return platform_driver_register(&fsl_pci_driver); } +arch_initcall(fsl_pci_init); #endif |