diff options
Diffstat (limited to 'arch/powerpc/sysdev/fsl_pci.c')
-rw-r--r-- | arch/powerpc/sysdev/fsl_pci.c | 137 |
1 files changed, 116 insertions, 21 deletions
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 4ce547e0047..6073288fed2 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -65,6 +65,30 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose) } #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) + +#define MAX_PHYS_ADDR_BITS 40 +static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS; + +static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + + /* + * Fixup PCI devices that are able to DMA to above the physical + * address width of the SoC such that we can address any internal + * SoC address from across PCI if needed + */ + if ((dev->bus == &pci_bus_type) && + dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) { + set_dma_ops(dev, &dma_direct_ops); + set_dma_offset(dev, pci64_dma_offset); + } + + *dev->dma_mask = dma_mask; + return 0; +} + static int __init setup_one_atmu(struct ccsr_pci __iomem *pci, unsigned int index, const struct resource *res, resource_size_t offset) @@ -113,6 +137,8 @@ static void __init setup_pci_atmu(struct pci_controller *hose, u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; char *name = hose->dn->full_name; + const u64 *reg; + int len; pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", (u64)rsrc->start, (u64)resource_size(rsrc)); @@ -179,12 +205,12 @@ static void __init setup_pci_atmu(struct pci_controller *hose, if (paddr_hi == paddr_lo) { pr_err("%s: No outbound window space\n", name); - return ; + goto out; } if (paddr_lo == 0) { pr_err("%s: No space for inbound window\n", name); - return ; + goto out; } /* setup PCSRBAR/PEXCSRBAR */ @@ -205,6 +231,33 @@ static void __init setup_pci_atmu(struct pci_controller *hose, /* Setup inbound mem window */ mem = memblock_end_of_DRAM(); + + /* + * The msi-address-64 property, if it exists, indicates the physical + * address of the MSIIR register. Normally, this register is located + * inside CCSR, so the ATMU that covers all of CCSR is used. But if + * this property exists, then we normally need to create a new ATMU + * for it. For now, however, we cheat. The only entity that creates + * this property is the Freescale hypervisor, and the address is + * specified in the partition configuration. Typically, the address + * is located in the page immediately after the end of DDR. If so, we + * can avoid allocating a new ATMU by extending the DDR ATMU by one + * page. + */ + reg = of_get_property(hose->dn, "msi-address-64", &len); + if (reg && (len == sizeof(u64))) { + u64 address = be64_to_cpup(reg); + + if ((address >= mem) && (address < (mem + PAGE_SIZE))) { + pr_info("%s: extending DDR ATMU to cover MSIIR", name); + mem += PAGE_SIZE; + } else { + /* TODO: Create a new ATMU for MSIIR */ + pr_warn("%s: msi-address-64 address of %llx is " + "unsupported\n", name, address); + } + } + sz = min(mem, paddr_lo); mem_log = __ilog2_u64(sz); @@ -228,6 +281,37 @@ static void __init setup_pci_atmu(struct pci_controller *hose, hose->dma_window_base_cur = 0x00000000; hose->dma_window_size = (resource_size_t)sz; + + /* + * if we have >4G of memory setup second PCI inbound window to + * let devices that are 64-bit address capable to work w/o + * SWIOTLB and access the full range of memory + */ + if (sz != mem) { + mem_log = __ilog2_u64(mem); + + /* Size window up if we dont fit in exact power-of-2 */ + if ((1ull << mem_log) != mem) + mem_log++; + + piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1); + + /* Setup inbound memory window */ + out_be32(&pci->piw[win_idx].pitar, 0x00000000); + out_be32(&pci->piw[win_idx].piwbear, + pci64_dma_offset >> 44); + out_be32(&pci->piw[win_idx].piwbar, + pci64_dma_offset >> 12); + out_be32(&pci->piw[win_idx].piwar, piwar); + + /* + * install our own dma_set_mask handler to fixup dma_ops + * and dma_offset + */ + ppc_md.dma_set_mask = fsl_pci_dma_set_mask; + + pr_info("%s: Setup 64-bit PCI DMA window\n", name); + } } else { u64 paddr = 0; @@ -273,6 +357,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose, (u64)hose->dma_window_size); } +out: iounmap(pci); } @@ -300,26 +385,36 @@ static void __init setup_pci_cmd(struct pci_controller *hose) void fsl_pcibios_fixup_bus(struct pci_bus *bus) { struct pci_controller *hose = pci_bus_to_host(bus); - int i; - - if ((bus->parent == hose->bus) && - ((fsl_pcie_bus_fixup && - early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) || - (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK))) - { - for (i = 0; i < 4; ++i) { + int i, is_pcie = 0, no_link; + + /* The root complex bridge comes up with bogus resources, + * we copy the PHB ones in. + * + * With the current generic PCI code, the PHB bus no longer + * has bus->resource[0..4] set, so things are a bit more + * tricky. + */ + + if (fsl_pcie_bus_fixup) + is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); + no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK); + + if (bus->parent == hose->bus && (is_pcie || no_link)) { + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) { struct resource *res = bus->resource[i]; - struct resource *par = bus->parent->resource[i]; - if (res) { - res->start = 0; - res->end = 0; - res->flags = 0; - } - if (res && par) { - res->start = par->start; - res->end = par->end; - res->flags = par->flags; - } + struct resource *par; + + if (!res) + continue; + if (i == 0) + par = &hose->io_resource; + else if (i < 4) + par = &hose->mem_resources[i-1]; + else par = NULL; + + res->start = par ? par->start : 0; + res->end = par ? par->end : 0; + res->flags = par ? par->flags : 0; } } } |