summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/sysdev/qe_lib/ucc.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/sysdev/qe_lib/ucc.c')
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc.c270
1 files changed, 115 insertions, 155 deletions
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index f970e5415ac..0e348d9af8a 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -28,228 +28,188 @@
static DEFINE_SPINLOCK(ucc_lock);
-int ucc_set_qe_mux_mii_mng(int ucc_num)
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
{
unsigned long flags;
+ if (ucc_num > UCC_MAX_NUM - 1)
+ return -EINVAL;
+
spin_lock_irqsave(&ucc_lock, flags);
- out_be32(&qe_immr->qmx.cmxgcr,
- ((in_be32(&qe_immr->qmx.cmxgcr) &
- ~QE_CMXGCR_MII_ENET_MNG) |
- (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
+ clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+ ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
spin_unlock_irqrestore(&ucc_lock, flags);
return 0;
}
EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
-int ucc_set_type(int ucc_num, struct ucc_common *regs,
- enum ucc_speed_type speed)
-{
- u8 guemr = 0;
-
- /* check if the UCC number is in range. */
- if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
- return -EINVAL;
-
- guemr = regs->guemr;
- guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
- switch (speed) {
- case UCC_SPEED_TYPE_SLOW:
- guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
- break;
- case UCC_SPEED_TYPE_FAST:
- guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
- break;
- default:
- return -EINVAL;
- }
- regs->guemr = guemr;
-
- return 0;
-}
-
-int ucc_init_guemr(struct ucc_common *regs)
+/* Configure the UCC to either Slow or Fast.
+ *
+ * A given UCC can be figured to support either "slow" devices (e.g. UART)
+ * or "fast" devices (e.g. Ethernet).
+ *
+ * 'ucc_num' is the UCC number, from 0 - 7.
+ *
+ * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
+ * must always be set to 1.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
{
- u8 guemr = 0;
-
- if (!regs)
- return -EINVAL;
-
- /* Set bit 3 (which is reserved in the GUEMR register) to 1 */
- guemr = UCC_GUEMR_SET_RESERVED3;
-
- regs->guemr = guemr;
-
- return 0;
-}
+ u8 __iomem *guemr;
-static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
- u8 * shift)
-{
+ /* The GUEMR register is at the same location for both slow and fast
+ devices, so we just use uccX.slow.guemr. */
switch (ucc_num) {
- case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
- *reg_num = 1;
- *shift = 16;
+ case 0: guemr = &qe_immr->ucc1.slow.guemr;
break;
- case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
- *reg_num = 1;
- *shift = 0;
+ case 1: guemr = &qe_immr->ucc2.slow.guemr;
break;
- case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
- *reg_num = 2;
- *shift = 16;
+ case 2: guemr = &qe_immr->ucc3.slow.guemr;
break;
- case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
- *reg_num = 2;
- *shift = 0;
+ case 3: guemr = &qe_immr->ucc4.slow.guemr;
break;
- case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
- *reg_num = 3;
- *shift = 16;
+ case 4: guemr = &qe_immr->ucc5.slow.guemr;
break;
- case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
- *reg_num = 3;
- *shift = 0;
+ case 5: guemr = &qe_immr->ucc6.slow.guemr;
break;
- case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
- *reg_num = 4;
- *shift = 16;
+ case 6: guemr = &qe_immr->ucc7.slow.guemr;
break;
- case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
- *reg_num = 4;
- *shift = 0;
+ case 7: guemr = &qe_immr->ucc8.slow.guemr;
break;
default:
- break;
+ return -EINVAL;
}
+
+ clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+ UCC_GUEMR_SET_RESERVED3 | speed);
+
+ return 0;
+}
+
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
+ unsigned int *reg_num, unsigned int *shift)
+{
+ unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
+
+ *reg_num = cmx + 1;
+ *cmxucr = &qe_immr->qmx.cmxucr[cmx];
+ *shift = 16 - 8 * (ucc_num & 2);
}
-int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
{
- volatile u32 *p_cmxucr;
- u8 reg_num;
- u8 shift;
+ __be32 *cmxucr;
+ unsigned int reg_num;
+ unsigned int shift;
/* check if the UCC number is in range. */
- if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ if (ucc_num > UCC_MAX_NUM - 1)
return -EINVAL;
- get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+ get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
if (set)
- out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
+ setbits32(cmxucr, mask << shift);
else
- out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
+ clrbits32(cmxucr, mask << shift);
return 0;
}
-int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+ enum comm_dir mode)
{
- volatile u32 *p_cmxucr;
- u8 reg_num;
- u8 shift;
- u32 clock_bits;
- u32 clock_mask;
- int source = -1;
+ __be32 *cmxucr;
+ unsigned int reg_num;
+ unsigned int shift;
+ u32 clock_bits = 0;
/* check if the UCC number is in range. */
- if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ if (ucc_num > UCC_MAX_NUM - 1)
return -EINVAL;
- if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
- printk(KERN_ERR
- "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+ /* The communications direction must be RX or TX */
+ if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
return -EINVAL;
- }
- get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+ get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
switch (reg_num) {
case 1:
switch (clock) {
- case QE_BRG1: source = 1; break;
- case QE_BRG2: source = 2; break;
- case QE_BRG7: source = 3; break;
- case QE_BRG8: source = 4; break;
- case QE_CLK9: source = 5; break;
- case QE_CLK10: source = 6; break;
- case QE_CLK11: source = 7; break;
- case QE_CLK12: source = 8; break;
- case QE_CLK15: source = 9; break;
- case QE_CLK16: source = 10; break;
- default: source = -1; break;
+ case QE_BRG1: clock_bits = 1; break;
+ case QE_BRG2: clock_bits = 2; break;
+ case QE_BRG7: clock_bits = 3; break;
+ case QE_BRG8: clock_bits = 4; break;
+ case QE_CLK9: clock_bits = 5; break;
+ case QE_CLK10: clock_bits = 6; break;
+ case QE_CLK11: clock_bits = 7; break;
+ case QE_CLK12: clock_bits = 8; break;
+ case QE_CLK15: clock_bits = 9; break;
+ case QE_CLK16: clock_bits = 10; break;
+ default: break;
}
break;
case 2:
switch (clock) {
- case QE_BRG5: source = 1; break;
- case QE_BRG6: source = 2; break;
- case QE_BRG7: source = 3; break;
- case QE_BRG8: source = 4; break;
- case QE_CLK13: source = 5; break;
- case QE_CLK14: source = 6; break;
- case QE_CLK19: source = 7; break;
- case QE_CLK20: source = 8; break;
- case QE_CLK15: source = 9; break;
- case QE_CLK16: source = 10; break;
- default: source = -1; break;
+ case QE_BRG5: clock_bits = 1; break;
+ case QE_BRG6: clock_bits = 2; break;
+ case QE_BRG7: clock_bits = 3; break;
+ case QE_BRG8: clock_bits = 4; break;
+ case QE_CLK13: clock_bits = 5; break;
+ case QE_CLK14: clock_bits = 6; break;
+ case QE_CLK19: clock_bits = 7; break;
+ case QE_CLK20: clock_bits = 8; break;
+ case QE_CLK15: clock_bits = 9; break;
+ case QE_CLK16: clock_bits = 10; break;
+ default: break;
}
break;
case 3:
switch (clock) {
- case QE_BRG9: source = 1; break;
- case QE_BRG10: source = 2; break;
- case QE_BRG15: source = 3; break;
- case QE_BRG16: source = 4; break;
- case QE_CLK3: source = 5; break;
- case QE_CLK4: source = 6; break;
- case QE_CLK17: source = 7; break;
- case QE_CLK18: source = 8; break;
- case QE_CLK7: source = 9; break;
- case QE_CLK8: source = 10; break;
- case QE_CLK16: source = 11; break;
- default: source = -1; break;
+ case QE_BRG9: clock_bits = 1; break;
+ case QE_BRG10: clock_bits = 2; break;
+ case QE_BRG15: clock_bits = 3; break;
+ case QE_BRG16: clock_bits = 4; break;
+ case QE_CLK3: clock_bits = 5; break;
+ case QE_CLK4: clock_bits = 6; break;
+ case QE_CLK17: clock_bits = 7; break;
+ case QE_CLK18: clock_bits = 8; break;
+ case QE_CLK7: clock_bits = 9; break;
+ case QE_CLK8: clock_bits = 10; break;
+ case QE_CLK16: clock_bits = 11; break;
+ default: break;
}
break;
case 4:
switch (clock) {
- case QE_BRG13: source = 1; break;
- case QE_BRG14: source = 2; break;
- case QE_BRG15: source = 3; break;
- case QE_BRG16: source = 4; break;
- case QE_CLK5: source = 5; break;
- case QE_CLK6: source = 6; break;
- case QE_CLK21: source = 7; break;
- case QE_CLK22: source = 8; break;
- case QE_CLK7: source = 9; break;
- case QE_CLK8: source = 10; break;
- case QE_CLK16: source = 11; break;
- default: source = -1; break;
+ case QE_BRG13: clock_bits = 1; break;
+ case QE_BRG14: clock_bits = 2; break;
+ case QE_BRG15: clock_bits = 3; break;
+ case QE_BRG16: clock_bits = 4; break;
+ case QE_CLK5: clock_bits = 5; break;
+ case QE_CLK6: clock_bits = 6; break;
+ case QE_CLK21: clock_bits = 7; break;
+ case QE_CLK22: clock_bits = 8; break;
+ case QE_CLK7: clock_bits = 9; break;
+ case QE_CLK8: clock_bits = 10; break;
+ case QE_CLK16: clock_bits = 11; break;
+ default: break;
}
break;
- default:
- source = -1;
- break;
+ default: break;
}
- if (source == -1) {
- printk(KERN_ERR
- "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+ /* Check for invalid combination of clock and UCC number */
+ if (!clock_bits)
return -ENOENT;
- }
- clock_bits = (u32) source;
- clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK;
- if (mode == COMM_DIR_RX) {
- clock_bits <<= 4; /* Rx field is 4 bits to left of Tx field */
- clock_mask <<= 4; /* Rx field is 4 bits to left of Tx field */
- }
- clock_bits <<= shift;
- clock_mask <<= shift;
+ if (mode == COMM_DIR_RX)
+ shift += 4;
- out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits);
+ clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ clock_bits << shift);
return 0;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-17 04:40:40 +0000