diff options
Diffstat (limited to 'arch/powerpc/sysdev/tsi108_pci.c')
| -rw-r--r-- | arch/powerpc/sysdev/tsi108_pci.c | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c new file mode 100644 index 00000000000..3265d54c82e --- /dev/null +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -0,0 +1,412 @@ +/* + * Common routines for Tundra Semiconductor TSI108 host bridge. + * + * 2004-2005 (c) Tundra Semiconductor Corp. + * Author: Alex Bounine (alexandreb@tundra.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/tsi108.h> +#include <asm/tsi108_irq.h> +#include <asm/prom.h> + +#undef DEBUG +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define tsi_mk_config_addr(bus, devfunc, offset) \ + ((((bus)<<16) | ((devfunc)<<8) | (offset & 0xfc)) + tsi108_pci_cfg_base) + +u32 tsi108_pci_cfg_base; +u32 tsi108_csr_vir_base; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_read_reg(u32 reg_offset); +extern void tsi108_write_reg(u32 reg_offset, u32 val); + +int +tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfunc, + int offset, int len, u32 val) +{ + volatile unsigned char *cfg_addr; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfunc)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfunc, offset) | + (offset & 0x03)); + +#ifdef DEBUG + printk("PCI CFG write : "); + printk("%d:0x%x:0x%x ", bus->number, devfunc, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%08x\n", val); +#endif + + switch (len) { + case 1: + out_8((u8 *) cfg_addr, val); + break; + case 2: + out_le16((u16 *) cfg_addr, val); + break; + default: + out_le32((u32 *) cfg_addr, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_error(u32 pci_cfg_base) +{ + u32 err_stat, err_addr, pci_stat; + + /* + * Quietly clear PB and PCI error flags set as result + * of PCI/X configuration read requests. + */ + + /* Read PB Error Log Registers */ + + err_stat = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS); + err_addr = tsi108_read_reg(TSI108_PB_OFFSET + TSI108_PB_AERR); + + if (err_stat & TSI108_PB_ERRCS_ES) { + /* Clear error flag */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ERRCS, + TSI108_PB_ERRCS_ES); + + /* Clear read error reported in PB_ISR */ + tsi108_write_reg(TSI108_PB_OFFSET + TSI108_PB_ISR, + TSI108_PB_ISR_PBS_RD_ERR); + + /* Clear PCI/X bus cfg errors if applicable */ + if ((err_addr & 0xFF000000) == pci_cfg_base) { + pci_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_CSR, + pci_stat); + } + } + + return; +} + +#define __tsi108_read_pci_config(x, addr, op) \ + __asm__ __volatile__( \ + " "op" %0,0,%1\n" \ + "1: eieio\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r"(x) : "r"(addr)) + +int +tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 * val) +{ + volatile unsigned char *cfg_addr; + u32 temp; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + cfg_addr = (unsigned char *)(tsi_mk_config_addr(bus->number, + devfn, + offset) | (offset & + 0x03)); + + switch (len) { + case 1: + __tsi108_read_pci_config(temp, cfg_addr, "lbzx"); + break; + case 2: + __tsi108_read_pci_config(temp, cfg_addr, "lhbrx"); + break; + default: + __tsi108_read_pci_config(temp, cfg_addr, "lwbrx"); + break; + } + + *val = temp; + +#ifdef DEBUG + if ((0xFFFFFFFF != temp) && (0xFFFF != temp) && (0xFF != temp)) { + printk("PCI CFG read : "); + printk("%d:0x%x:0x%x ", bus->number, devfn, offset); + printk("%d ADDR=0x%08x ", len, (uint) cfg_addr); + printk("data = 0x%x\n", *val); + } +#endif + return PCIBIOS_SUCCESSFUL; +} + +void tsi108_clear_pci_cfg_error(void) +{ + tsi108_clear_pci_error(TSI108_PCI_CFG_BASE_PHYS); +} + +static struct pci_ops tsi108_direct_pci_ops = { + tsi108_direct_read_config, + tsi108_direct_write_config +}; + +int __init tsi108_setup_pci(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + int *bus_range; + int primary = 0, has_address = 0; + + /* PCI Config mapping */ + tsi108_pci_cfg_base = (u32)ioremap(TSI108_PCI_CFG_BASE_PHYS, + TSI108_PCI_CFG_SIZE); + DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__, + tsi108_pci_cfg_base); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = (int *)get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + } + + hose = pcibios_alloc_controller(); + + if (!hose) { + printk("PCI Host bridge init failed\n"); + return -ENOMEM; + } + hose->arch_data = dev; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + (hose)->ops = &tsi108_direct_pci_ops; + + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + return 0; +} + +/* + * Low level utility functions + */ + +static void tsi108_pci_int_mask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg |= (1 << int_line); /* INTx_DIR = output */ + irp_cfg &= ~(3 << (8 + (int_line * 2))); /* INTx_TYPE = unused */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); +} + +static void tsi108_pci_int_unmask(u_int irq) +{ + u_int irp_cfg; + int int_line = (irq - IRQ_PCI_INTAD_BASE); + + irp_cfg = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + irp_cfg &= ~(1 << int_line); + irp_cfg |= (3 << (8 + (int_line * 2))); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, irp_cfg); + mb(); +} + +static void init_pci_source(void) +{ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL, + 0x0000ff00); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +static inline int get_pci_source(void) +{ + u_int temp = 0; + int irq = -1; + int i; + u_int pci_irp_stat; + static int mask = 0; + + /* Read PCI/X block interrupt status register */ + pci_irp_stat = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + mb(); + + if (pci_irp_stat & TSI108_PCI_IRP_STAT_P_INT) { + /* Process Interrupt from PCI bus INTA# - INTD# lines */ + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_INTAD) & 0xf; + mb(); + for (i = 0; i < 4; i++, mask++) { + if (temp & (1 << mask % 4)) { + irq = IRQ_PCI_INTA + mask % 4; + mask++; + break; + } + } + + /* Disable interrupts from PCI block */ + temp = tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + temp & ~TSI108_PCI_IRP_ENABLE_P_INT); + mb(); + (void)tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + } +#ifdef DEBUG + else { + printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n"); + pci_irp_stat = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_STAT); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_INTAD); + mb(); + printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_CFG_CTL); + mb(); + printk("cfg_ctl=0x%08x ", temp); + temp = + tsi108_read_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE); + mb(); + printk("irp_enable=0x%08x\n", temp); + } +#endif /* end of DEBUG */ + + return irq; +} + + +/* + * Linux descriptor level callbacks + */ + +static void tsi108_pci_irq_enable(u_int irq) +{ + tsi108_pci_int_unmask(irq); +} + +static void tsi108_pci_irq_disable(u_int irq) +{ + tsi108_pci_int_mask(irq); +} + +static void tsi108_pci_irq_ack(u_int irq) +{ + tsi108_pci_int_mask(irq); +} + +static void tsi108_pci_irq_end(u_int irq) +{ + tsi108_pci_int_unmask(irq); + + /* Enable interrupts from PCI block */ + tsi108_write_reg(TSI108_PCI_OFFSET + TSI108_PCI_IRP_ENABLE, + tsi108_read_reg(TSI108_PCI_OFFSET + + TSI108_PCI_IRP_ENABLE) | + TSI108_PCI_IRP_ENABLE_P_INT); + mb(); +} + +/* + * Interrupt controller descriptor for cascaded PCI interrupt controller. + */ + +struct hw_interrupt_type tsi108_pci_irq = { + .typename = "tsi108_PCI_int", + .enable = tsi108_pci_irq_enable, + .disable = tsi108_pci_irq_disable, + .ack = tsi108_pci_irq_ack, + .end = tsi108_pci_irq_end, +}; + +/* + * Exported functions + */ + +/* + * The Tsi108 PCI interrupts initialization routine. + * + * The INTA# - INTD# interrupts on the PCI bus are reported by the PCI block + * to the MPIC using single interrupt source (IRQ_TSI108_PCI). Therefore the + * PCI block has to be treated as a cascaded interrupt controller connected + * to the MPIC. + */ + +void __init tsi108_pci_int_init(void) +{ + u_int i; + + DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); + + for (i = 0; i < NUM_PCI_IRQS; i++) { + irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; + } + + init_pci_source(); +} + +int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +{ + return get_pci_source(); +} |