diff options
Diffstat (limited to 'arch/powerpc/sysdev')
| -rw-r--r-- | arch/powerpc/sysdev/Kconfig | 4 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/Makefile | 2 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/ge/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/ge/ge_pic.c | 252 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/ge/ge_pic.h | 11 |
5 files changed, 270 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index 7b4df37ac38..a84fecf63c4 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -29,3 +29,7 @@ config SCOM_DEBUGFS bool "Expose SCOM controllers via debugfs" depends on PPC_SCOM default n + +config GE_FPGA + bool + default n diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 5e37b471786..f80ff9f5f44 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -65,3 +65,5 @@ obj-$(CONFIG_PPC_SCOM) += scom.o subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror obj-$(CONFIG_PPC_XICS) += xics/ + +obj-$(CONFIG_GE_FPGA) += ge/ diff --git a/arch/powerpc/sysdev/ge/Makefile b/arch/powerpc/sysdev/ge/Makefile new file mode 100644 index 00000000000..8731ffcb79b --- /dev/null +++ b/arch/powerpc/sysdev/ge/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_GE_FPGA) += ge_pic.o diff --git a/arch/powerpc/sysdev/ge/ge_pic.c b/arch/powerpc/sysdev/ge/ge_pic.c new file mode 100644 index 00000000000..002a56295e0 --- /dev/null +++ b/arch/powerpc/sysdev/ge/ge_pic.c @@ -0,0 +1,252 @@ +/* + * Interrupt handling for GE FPGA based PIC + * + * Author: Martyn Welch <martyn.welch@ge.com> + * + * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/irq.h> + +#include "ge_pic.h" + +#define DEBUG +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0) +#else +#define DBG(fmt...) do { } while (0) +#endif + +#define GEF_PIC_NUM_IRQS 32 + +/* Interrupt Controller Interface Registers */ +#define GEF_PIC_INTR_STATUS 0x0000 + +#define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu)) +#define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0) +#define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1) + +#define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu)) +#define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0) +#define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1) + + +static DEFINE_RAW_SPINLOCK(gef_pic_lock); + +static void __iomem *gef_pic_irq_reg_base; +static struct irq_host *gef_pic_irq_host; +static int gef_pic_cascade_irq; + +/* + * Interrupt Controller Handling + * + * The interrupt controller handles interrupts for most on board interrupts, + * apart from PCI interrupts. For example on SBC610: + * + * 17:31 RO Reserved + * 16 RO PCI Express Doorbell 3 Status + * 15 RO PCI Express Doorbell 2 Status + * 14 RO PCI Express Doorbell 1 Status + * 13 RO PCI Express Doorbell 0 Status + * 12 RO Real Time Clock Interrupt Status + * 11 RO Temperature Interrupt Status + * 10 RO Temperature Critical Interrupt Status + * 9 RO Ethernet PHY1 Interrupt Status + * 8 RO Ethernet PHY3 Interrupt Status + * 7 RO PEX8548 Interrupt Status + * 6 RO Reserved + * 5 RO Watchdog 0 Interrupt Status + * 4 RO Watchdog 1 Interrupt Status + * 3 RO AXIS Message FIFO A Interrupt Status + * 2 RO AXIS Message FIFO B Interrupt Status + * 1 RO AXIS Message FIFO C Interrupt Status + * 0 RO AXIS Message FIFO D Interrupt Status + * + * Interrupts can be forwarded to one of two output lines. Nothing + * clever is done, so if the masks are incorrectly set, a single input + * interrupt could generate interrupts on both output lines! + * + * The dual lines are there to allow the chained interrupts to be easily + * passed into two different cores. We currently do not use this functionality + * in this driver. + * + * Controller can also be configured to generate Machine checks (MCP), again on + * two lines, to be attached to two different cores. It is suggested that these + * should be masked out. + */ + +void gef_pic_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq; + + /* + * See if we actually have an interrupt, call generic handling code if + * we do. + */ + cascade_irq = gef_pic_get_irq(); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +static void gef_pic_mask(struct irq_data *d) +{ + unsigned long flags; + unsigned int hwirq = irqd_to_hwirq(d); + u32 mask; + + raw_spin_lock_irqsave(&gef_pic_lock, flags); + mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); + mask &= ~(1 << hwirq); + out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask); + raw_spin_unlock_irqrestore(&gef_pic_lock, flags); +} + +static void gef_pic_mask_ack(struct irq_data *d) +{ + /* Don't think we actually have to do anything to ack an interrupt, + * we just need to clear down the devices interrupt and it will go away + */ + gef_pic_mask(d); +} + +static void gef_pic_unmask(struct irq_data *d) +{ + unsigned long flags; + unsigned int hwirq = irqd_to_hwirq(d); + u32 mask; + + raw_spin_lock_irqsave(&gef_pic_lock, flags); + mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); + mask |= (1 << hwirq); + out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask); + raw_spin_unlock_irqrestore(&gef_pic_lock, flags); +} + +static struct irq_chip gef_pic_chip = { + .name = "gefp", + .irq_mask = gef_pic_mask, + .irq_mask_ack = gef_pic_mask_ack, + .irq_unmask = gef_pic_unmask, +}; + + +/* When an interrupt is being configured, this call allows some flexibilty + * in deciding which irq_chip structure is used + */ +static int gef_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hwirq) +{ + /* All interrupts are LEVEL sensitive */ + irq_set_status_flags(virq, IRQ_LEVEL); + irq_set_chip_and_handler(virq, &gef_pic_chip, handle_level_irq); + + return 0; +} + +static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + + *out_hwirq = intspec[0]; + if (intsize > 1) + *out_flags = intspec[1]; + else + *out_flags = IRQ_TYPE_LEVEL_HIGH; + + return 0; +} + +static struct irq_host_ops gef_pic_host_ops = { + .map = gef_pic_host_map, + .xlate = gef_pic_host_xlate, +}; + + +/* + * Initialisation of PIC, this should be called in BSP + */ +void __init gef_pic_init(struct device_node *np) +{ + unsigned long flags; + + /* Map the devices registers into memory */ + gef_pic_irq_reg_base = of_iomap(np, 0); + + raw_spin_lock_irqsave(&gef_pic_lock, flags); + + /* Initialise everything as masked. */ + out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0); + out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0); + + out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0); + out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0); + + raw_spin_unlock_irqrestore(&gef_pic_lock, flags); + + /* Map controller */ + gef_pic_cascade_irq = irq_of_parse_and_map(np, 0); + if (gef_pic_cascade_irq == NO_IRQ) { + printk(KERN_ERR "SBC610: failed to map cascade interrupt"); + return; + } + + /* Setup an irq_host structure */ + gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, + GEF_PIC_NUM_IRQS, + &gef_pic_host_ops, NO_IRQ); + if (gef_pic_irq_host == NULL) + return; + + /* Chain with parent controller */ + irq_set_chained_handler(gef_pic_cascade_irq, gef_pic_cascade); +} + +/* + * This is called when we receive an interrupt with apparently comes from this + * chip - check, returning the highest interrupt generated or return NO_IRQ + */ +unsigned int gef_pic_get_irq(void) +{ + u32 cause, mask, active; + unsigned int virq = NO_IRQ; + int hwirq; + + cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS); + + mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); + + active = cause & mask; + + if (active) { + for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) { + if (active & (0x1 << hwirq)) + break; + } + virq = irq_linear_revmap(gef_pic_irq_host, + (irq_hw_number_t)hwirq); + } + + return virq; +} + diff --git a/arch/powerpc/sysdev/ge/ge_pic.h b/arch/powerpc/sysdev/ge/ge_pic.h new file mode 100644 index 00000000000..6149916da3f --- /dev/null +++ b/arch/powerpc/sysdev/ge/ge_pic.h @@ -0,0 +1,11 @@ +#ifndef __GEF_PIC_H__ +#define __GEF_PIC_H__ + +#include <linux/init.h> + +void gef_pic_cascade(unsigned int, struct irq_desc *); +unsigned int gef_pic_get_irq(void); +void gef_pic_init(struct device_node *); + +#endif /* __GEF_PIC_H__ */ + |