12 files changed, 242 insertions, 152 deletions

diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig
index 0b192a1c429..29e427085ef 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/arch/powerpc/sysdev/bestcomm/Kconfig
@@ -9,8 +9,8 @@ config PPC_BESTCOMM
 	select PPC_LIB_RHEAP
 	help
 	  BestComm is the name of the communication coprocessor found
-	  on the Freescale MPC5200 family of processor. It's usage is
-	  optionnal for some drivers (like ATA), but required for
+	  on the Freescale MPC5200 family of processor.  Its usage is
+	  optional for some drivers (like ATA), but required for
 	  others (like FEC).
 
 	  If you want to use drivers that require DMA operations,
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 490473ce810..82424cd7e12 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -119,7 +119,6 @@ static irqreturn_t cpm_error_interrupt(int irq, void *dev)
 
 static struct irqaction cpm_error_irqaction = {
 	.handler = cpm_error_interrupt,
-	.mask = CPU_MASK_NONE,
 	.name = "error",
 };
 
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index f1c3395633b..fd969f0e312 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -52,6 +52,7 @@ cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
  * the communication processor devices.
  */
 cpm2_map_t __iomem *cpm2_immr;
+EXPORT_SYMBOL(cpm2_immr);
 
 #define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
 					   of space for CPM as it is larger
@@ -129,7 +130,8 @@ void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
 		brg -= 4;
 	}
 	bp += brg;
-	val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
+	/* Round the clock divider to the nearest integer. */
+	val = (((clk * 2 / rate) - 1) & ~1) | CPM_BRG_EN | src;
 	if (div16)
 		val |= CPM_BRG_DIV16;
 
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 00d3d17c84a..e4b6d66d93d 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -56,7 +56,7 @@ void __init udbg_init_cpm(void)
 {
 	if (cpm_udbg_txdesc) {
 #ifdef CONFIG_CPM2
-		setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO);
+		setbat(1, 0xf0000000, 0xf0000000, 1024*1024, PAGE_KERNEL_NCG);
 #endif
 		udbg_putc = udbg_putc_cpm;
 	}
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 9817f63723d..78021d8afc5 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1,12 +1,16 @@
 /*
  * MPC83xx/85xx/86xx PCI/PCIE support routing.
  *
- * Copyright 2007,2008 Freescale Semiconductor, Inc
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 MontaVista Software, Inc.
  *
  * Initial author: Xianghua Xiao <x.xiao@freescale.com>
  * Recode: ZHANG WEI <wei.zhang@freescale.com>
  * Rewrite the routing for Frescale PCI and PCI Express
  * 	Roy Zang <tie-fei.zang@freescale.com>
+ * MPC83xx PCI-Express support:
+ * 	Tony Li <tony.li@freescale.com>
+ * 	Anton Vorontsov <avorontsov@ru.mvista.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -27,6 +31,29 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+static int fsl_pcie_bus_fixup;
+
+static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
+{
+	/* if we aren't a PCIe don't bother */
+	if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
+		return;
+
+	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+	fsl_pcie_bus_fixup = 1;
+	return;
+}
+
+static int __init fsl_pcie_check_link(struct pci_controller *hose)
+{
+	u32 val;
+
+	early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
+	if (val < PCIE_LTSSM_L0)
+		return 1;
+	return 0;
+}
+
 #if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
 static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
 	unsigned int index, const struct resource *res,
@@ -159,28 +186,6 @@ static void __init setup_pci_pcsrbar(struct pci_controller *hose)
 #endif
 }
 
-static int fsl_pcie_bus_fixup;
-
-static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
-{
-	/* if we aren't a PCIe don't bother */
-	if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
-		return ;
-
-	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-	fsl_pcie_bus_fixup = 1;
-	return ;
-}
-
-static int __init fsl_pcie_check_link(struct pci_controller *hose)
-{
-	u32 val;
-	early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
-	if (val < PCIE_LTSSM_L0)
-		return 1;
-	return 0;
-}
-
 void fsl_pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
@@ -294,8 +299,184 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
 #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378, quirk_fsl_pcie_header);
+
+struct mpc83xx_pcie_priv {
+	void __iomem *cfg_type0;
+	void __iomem *cfg_type1;
+	u32 dev_base;
+};
+
+/*
+ * With the convention of u-boot, the PCIE outbound window 0 serves
+ * as configuration transactions outbound.
+ */
+#define PEX_OUTWIN0_BAR		0xCA4
+#define PEX_OUTWIN0_TAL		0xCA8
+#define PEX_OUTWIN0_TAH		0xCAC
+
+static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * Workaround for the HW bug: for Type 0 configure transactions the
+	 * PCI-E controller does not check the device number bits and just
+	 * assumes that the device number bits are 0.
+	 */
+	if (bus->number == hose->first_busno ||
+			bus->primary == hose->first_busno) {
+		if (devfn & 0xf8)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	if (ppc_md.pci_exclude_device) {
+		if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus,
+					    unsigned int devfn, int offset)
+{
+	struct pci_controller *hose = bus->sysdata;
+	struct mpc83xx_pcie_priv *pcie = hose->dn->data;
+	u8 bus_no = bus->number - hose->first_busno;
+	u32 dev_base = bus_no << 24 | devfn << 16;
+	int ret;
+
+	ret = mpc83xx_pcie_exclude_device(bus, devfn);
+	if (ret)
+		return NULL;
+
+	offset &= 0xfff;
+
+	/* Type 0 */
+	if (bus->number == hose->first_busno)
+		return pcie->cfg_type0 + offset;
+
+	if (pcie->dev_base == dev_base)
+		goto mapped;
+
+	out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base);
+
+	pcie->dev_base = dev_base;
+mapped:
+	return pcie->cfg_type1 + offset;
+}
+
+static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int offset, int len, u32 *val)
+{
+	void __iomem *cfg_addr;
+
+	cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
+	if (!cfg_addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (len) {
+	case 1:
+		*val = in_8(cfg_addr);
+		break;
+	case 2:
+		*val = in_le16(cfg_addr);
+		break;
+	default:
+		*val = in_le32(cfg_addr);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+				     int offset, int len, u32 val)
+{
+	void __iomem *cfg_addr;
+
+	cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset);
+	if (!cfg_addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	switch (len) {
+	case 1:
+		out_8(cfg_addr, val);
+		break;
+	case 2:
+		out_le16(cfg_addr, val);
+		break;
+	default:
+		out_le32(cfg_addr, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mpc83xx_pcie_ops = {
+	.read = mpc83xx_pcie_read_config,
+	.write = mpc83xx_pcie_write_config,
+};
+
+static int __init mpc83xx_pcie_setup(struct pci_controller *hose,
+				     struct resource *reg)
+{
+	struct mpc83xx_pcie_priv *pcie;
+	u32 cfg_bar;
+	int ret = -ENOMEM;
+
+	pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return ret;
+
+	pcie->cfg_type0 = ioremap(reg->start, resource_size(reg));
+	if (!pcie->cfg_type0)
+		goto err0;
+
+	cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR);
+	if (!cfg_bar) {
+		/* PCI-E isn't configured. */
+		ret = -ENODEV;
+		goto err1;
+	}
+
+	pcie->cfg_type1 = ioremap(cfg_bar, 0x1000);
+	if (!pcie->cfg_type1)
+		goto err1;
+
+	WARN_ON(hose->dn->data);
+	hose->dn->data = pcie;
+	hose->ops = &mpc83xx_pcie_ops;
+
+	out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0);
+	out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0);
+
+	if (fsl_pcie_check_link(hose))
+		hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+
+	return 0;
+err1:
+	iounmap(pcie->cfg_type0);
+err0:
+	kfree(pcie);
+	return ret;
+
+}
+
 int __init mpc83xx_add_bridge(struct device_node *dev)
 {
+	int ret;
 	int len;
 	struct pci_controller *hose;
 	struct resource rsrc_reg;
@@ -303,6 +484,11 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 	const int *bus_range;
 	int primary;
 
+	if (!of_device_is_available(dev)) {
+		pr_warning("%s: disabled by the firmware.\n",
+			   dev->full_name);
+		return -ENODEV;
+	}
 	pr_debug("Adding PCI host bridge %s\n", dev->full_name);
 
 	/* Fetch host bridge registers address */
@@ -350,7 +536,14 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-	setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0);
+	if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) {
+		ret = mpc83xx_pcie_setup(hose, &rsrc_reg);
+		if (ret)
+			goto err0;
+	} else {
+		setup_indirect_pci(hose, rsrc_cfg.start,
+				   rsrc_cfg.start + 4, 0);
+	}
 
 	printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
 	       "Firmware bus number: %d->%d\n",
@@ -365,5 +558,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
 	pci_process_bridge_OF_ranges(hose, dev, primary);
 
 	return 0;
+err0:
+	pcibios_free_controller(hose);
+	return ret;
 }
 #endif /* CONFIG_PPC_83xx */
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 115cb16351f..afe8dbc964a 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/phy_fixed.h>
@@ -328,6 +329,9 @@ static int __init fsl_usb_of_init(void)
 		struct fsl_usb2_platform_data usb_data;
 		const unsigned char *prop = NULL;
 
+		if (!of_device_is_available(np))
+			continue;
+
 		memset(&r, 0, sizeof(r));
 		memset(&usb_data, 0, sizeof(usb_data));
 
@@ -413,115 +417,6 @@ err:
 
 arch_initcall(fsl_usb_of_init);
 
-static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
-				   struct spi_board_info *board_infos,
-				   unsigned int num_board_infos,
-				   void (*activate_cs)(u8 cs, u8 polarity),
-				   void (*deactivate_cs)(u8 cs, u8 polarity))
-{
-	struct device_node *np;
-	unsigned int i = 0;
-
-	for_each_compatible_node(np, type, compatible) {
-		int ret;
-		unsigned int j;
-		const void *prop;
-		struct resource res[2];
-		struct platform_device *pdev;
-		struct fsl_spi_platform_data pdata = {
-			.activate_cs = activate_cs,
-			.deactivate_cs = deactivate_cs,
-		};
-
-		memset(res, 0, sizeof(res));
-
-		pdata.sysclk = sysclk;
-
-		prop = of_get_property(np, "reg", NULL);
-		if (!prop)
-			goto err;
-		pdata.bus_num = *(u32 *)prop;
-
-		prop = of_get_property(np, "cell-index", NULL);
-		if (prop)
-			i = *(u32 *)prop;
-
-		prop = of_get_property(np, "mode", NULL);
-		if (prop && !strcmp(prop, "cpu-qe"))
-			pdata.qe_mode = 1;
-
-		for (j = 0; j < num_board_infos; j++) {
-			if (board_infos[j].bus_num == pdata.bus_num)
-				pdata.max_chipselect++;
-		}
-
-		if (!pdata.max_chipselect)
-			continue;
-
-		ret = of_address_to_resource(np, 0, &res[0]);
-		if (ret)
-			goto err;
-
-		ret = of_irq_to_resource(np, 0, &res[1]);
-		if (ret == NO_IRQ)
-			goto err;
-
-		pdev = platform_device_alloc("mpc83xx_spi", i);
-		if (!pdev)
-			goto err;
-
-		ret = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-		if (ret)
-			goto unreg;
-
-		ret = platform_device_add_resources(pdev, res,
-						    ARRAY_SIZE(res));
-		if (ret)
-			goto unreg;
-
-		ret = platform_device_add(pdev);
-		if (ret)
-			goto unreg;
-
-		goto next;
-unreg:
-		platform_device_del(pdev);
-err:
-		pr_err("%s: registration failed\n", np->full_name);
-next:
-		i++;
-	}
-
-	return i;
-}
-
-int __init fsl_spi_init(struct spi_board_info *board_infos,
-			unsigned int num_board_infos,
-			void (*activate_cs)(u8 cs, u8 polarity),
-			void (*deactivate_cs)(u8 cs, u8 polarity))
-{
-	u32 sysclk = -1;
-	int ret;
-
-#ifdef CONFIG_QUICC_ENGINE
-	/* SPI controller is either clocked from QE or SoC clock */
-	sysclk = get_brgfreq();
-#endif
-	if (sysclk == -1) {
-		sysclk = fsl_get_sys_freq();
-		if (sysclk == -1)
-			return -ENODEV;
-	}
-
-	ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
-			       num_board_infos, activate_cs, deactivate_cs);
-	if (!ret)
-		of_fsl_spi_probe("spi", "fsl_spi", sysclk, board_infos,
-				 num_board_infos, activate_cs, deactivate_cs);
-
-	return spi_register_board_info(board_infos, num_board_infos);
-}
-
 #if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
 static __be32 __iomem *rstcr;
 
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 9c744e4285a..42381bb6cd5 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -4,6 +4,8 @@
 
 #include <asm/mmu.h>
 
+struct spi_device;
+
 extern phys_addr_t get_immrbase(void);
 #if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx)
 extern u32 get_brgfreq(void);
@@ -17,11 +19,6 @@ extern u32 fsl_get_sys_freq(void);
 struct spi_board_info;
 struct device_node;
 
-extern int fsl_spi_init(struct spi_board_info *board_infos,
-			unsigned int num_board_infos,
-			void (*activate_cs)(u8 cs, u8 polarity),
-			void (*deactivate_cs)(u8 cs, u8 polarity));
-
 extern void fsl_rstcr_restart(char *cmd);
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 9a89cd3e80a..a86d3ce01ea 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -568,8 +568,7 @@ static void ipic_ack_irq(unsigned int virq)
 
 	spin_lock_irqsave(&ipic_lock, flags);
 
-	temp = ipic_read(ipic->regs, ipic_info[src].ack);
-	temp |= (1 << (31 - ipic_info[src].bit));
+	temp = 1 << (31 - ipic_info[src].bit);
 	ipic_write(ipic->regs, ipic_info[src].ack, temp);
 
 	/* mb() can't guarantee that ack is finished.  But it does finish
@@ -592,8 +591,7 @@ static void ipic_mask_irq_and_ack(unsigned int virq)
 	temp &= ~(1 << (31 - ipic_info[src].bit));
 	ipic_write(ipic->regs, ipic_info[src].mask, temp);
 
-	temp = ipic_read(ipic->regs, ipic_info[src].ack);
-	temp |= (1 << (31 - ipic_info[src].bit));
+	temp = 1 << (31 - ipic_info[src].bit);
 	ipic_write(ipic->regs, ipic_info[src].ack, temp);
 
 	/* mb() can't guarantee that ack is finished.  But it does finish
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index a35297dbac2..532e205303a 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -566,9 +566,10 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 #ifdef CONFIG_SMP
 static int irq_choose_cpu(unsigned int virt_irq)
 {
-	cpumask_t mask = irq_desc[virt_irq].affinity;
+	cpumask_t mask;
 	int cpuid;
 
+	cpumask_copy(&mask, irq_desc[virt_irq].affinity);
 	if (cpus_equal(mask, CPU_MASK_ALL)) {
 		static int irq_rover;
 		static DEFINE_SPINLOCK(irq_rover_lock);
diff --git a/arch/powerpc/sysdev/msi_bitmap.c b/arch/powerpc/sysdev/msi_bitmap.c
index f84217b8863..5a32cbef9b6 100644
--- a/arch/powerpc/sysdev/msi_bitmap.c
+++ b/arch/powerpc/sysdev/msi_bitmap.c
@@ -141,7 +141,7 @@ void msi_bitmap_free(struct msi_bitmap *bmp)
 #define check(x)	\
 	if (!(x)) printk("msi_bitmap: test failed at line %d\n", __LINE__);
 
-void test_basics(void)
+void __init test_basics(void)
 {
 	struct msi_bitmap bmp;
 	int i, size = 512;
@@ -186,7 +186,7 @@ void test_basics(void)
 	kfree(bmp.bitmap);
 }
 
-void test_of_node(void)
+void __init test_of_node(void)
 {
 	u32 prop_data[] = { 10, 10, 25, 3, 40, 1, 100, 100, 200, 20 };
 	const char *expected_str = "0-9,20-24,28-39,41-99,220-255";
@@ -234,7 +234,7 @@ void test_of_node(void)
 	kfree(bmp.bitmap);
 }
 
-int msi_bitmap_selftest(void)
+int __init msi_bitmap_selftest(void)
 {
 	printk(KERN_DEBUG "Running MSI bitmap self-tests ...\n");
 
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
index c858749263e..aaa915998eb 100644
--- a/arch/powerpc/sysdev/pmi.c
+++ b/arch/powerpc/sysdev/pmi.c
@@ -50,7 +50,7 @@ struct pmi_data {
 
 static struct pmi_data *data;
 
-static int pmi_irq_handler(int irq, void *dev_id)
+static irqreturn_t pmi_irq_handler(int irq, void *dev_id)
 {
 	u8 type;
 	int rc;
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 5558d932b4d..6a2d473c345 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1839,6 +1839,8 @@ static int __init ppc4xx_pci_find_bridges(void)
 {
 	struct device_node *np;
 
+	ppc_pci_flags |= PPC_PCI_ENABLE_PROC_DOMAINS | PPC_PCI_COMPAT_DOMAIN_0;
+
 #ifdef CONFIG_PPC4xx_PCI_EXPRESS
 	for_each_compatible_node(np, NULL, "ibm,plb-pciex")
 		ppc4xx_probe_pciex_bridge(np);