summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/sysdev
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/sysdev')
-rw-r--r--arch/powerpc/sysdev/Makefile2
-rw-r--r--arch/powerpc/sysdev/dart_iommu.c19
-rw-r--r--arch/powerpc/sysdev/fsl_85xx_l2ctlr.c10
-rw-r--r--arch/powerpc/sysdev/fsl_ifc.c20
-rw-r--r--arch/powerpc/sysdev/fsl_mpic_err.c149
-rw-r--r--arch/powerpc/sysdev/fsl_msi.c8
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c154
-rw-r--r--arch/powerpc/sysdev/fsl_pci.h20
-rw-r--r--arch/powerpc/sysdev/mpic.c102
-rw-r--r--arch/powerpc/sysdev/mpic.h22
-rw-r--r--arch/powerpc/sysdev/mpic_msgr.c3
-rw-r--r--arch/powerpc/sysdev/xics/icp-hv.c6
12 files changed, 415 insertions, 100 deletions
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 1bd7ecb2462..a57600b3a4e 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
obj-$(CONFIG_PPC_PMI) += pmi.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
-obj-$(CONFIG_FSL_SOC) += fsl_soc.o
+obj-$(CONFIG_FSL_SOC) += fsl_soc.o fsl_mpic_err.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 4f2680f431b..bd968a43a48 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -43,7 +43,6 @@
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
-#include <asm/abs_addr.h>
#include <asm/cacheflush.h>
#include <asm/ppc-pci.h>
@@ -74,11 +73,16 @@ static int dart_is_u4;
#define DBG(...)
+static DEFINE_SPINLOCK(invalidate_lock);
+
static inline void dart_tlb_invalidate_all(void)
{
unsigned long l = 0;
unsigned int reg, inv_bit;
unsigned long limit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&invalidate_lock, flags);
DBG("dart: flush\n");
@@ -111,12 +115,17 @@ retry:
panic("DART: TLB did not flush after waiting a long "
"time. Buggy U3 ?");
}
+
+ spin_unlock_irqrestore(&invalidate_lock, flags);
}
static inline void dart_tlb_invalidate_one(unsigned long bus_rpn)
{
unsigned int reg;
unsigned int l, limit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&invalidate_lock, flags);
reg = DART_CNTL_U4_ENABLE | DART_CNTL_U4_IONE |
(bus_rpn & DART_CNTL_U4_IONE_MASK);
@@ -138,6 +147,8 @@ wait_more:
panic("DART: TLB did not flush after waiting a long "
"time. Buggy U4 ?");
}
+
+ spin_unlock_irqrestore(&invalidate_lock, flags);
}
static void dart_flush(struct iommu_table *tbl)
@@ -167,7 +178,7 @@ static int dart_build(struct iommu_table *tbl, long index,
*/
l = npages;
while (l--) {
- rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;
+ rpn = __pa(uaddr) >> DART_PAGE_SHIFT;
*(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
@@ -244,7 +255,7 @@ static int __init dart_init(struct device_node *dart_node)
panic("DART: Cannot map registers!");
/* Map in DART table */
- dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);
+ dart_vbase = ioremap(__pa(dart_tablebase), dart_tablesize);
/* Fill initial table */
for (i = 0; i < dart_tablesize/4; i++)
@@ -463,7 +474,7 @@ void __init alloc_dart_table(void)
* will blow up an entire large page anyway in the kernel mapping
*/
dart_tablebase = (unsigned long)
- abs_to_virt(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
+ __va(memblock_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
}
diff --git a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
index 68ac3aacb19..d131c8a1cb1 100644
--- a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
+++ b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
@@ -193,6 +193,16 @@ static struct of_device_id mpc85xx_l2ctlr_of_match[] = {
{
.compatible = "fsl,mpc8548-l2-cache-controller",
},
+ { .compatible = "fsl,mpc8544-l2-cache-controller",},
+ { .compatible = "fsl,mpc8572-l2-cache-controller",},
+ { .compatible = "fsl,mpc8536-l2-cache-controller",},
+ { .compatible = "fsl,p1021-l2-cache-controller",},
+ { .compatible = "fsl,p1012-l2-cache-controller",},
+ { .compatible = "fsl,p1025-l2-cache-controller",},
+ { .compatible = "fsl,p1016-l2-cache-controller",},
+ { .compatible = "fsl,p1024-l2-cache-controller",},
+ { .compatible = "fsl,p1015-l2-cache-controller",},
+ { .compatible = "fsl,p1010-l2-cache-controller",},
{},
};
diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/arch/powerpc/sysdev/fsl_ifc.c
index b31f19f6103..097cc9d2585 100644
--- a/arch/powerpc/sysdev/fsl_ifc.c
+++ b/arch/powerpc/sysdev/fsl_ifc.c
@@ -244,12 +244,6 @@ static int __devinit fsl_ifc_ctrl_probe(struct platform_device *dev)
/* get the nand machine irq */
fsl_ifc_ctrl_dev->nand_irq =
irq_of_parse_and_map(dev->dev.of_node, 1);
- if (fsl_ifc_ctrl_dev->nand_irq == NO_IRQ) {
- dev_err(&dev->dev, "failed to get irq resource "
- "for NAND Machine\n");
- ret = -ENODEV;
- goto err;
- }
fsl_ifc_ctrl_dev->dev = &dev->dev;
@@ -267,12 +261,14 @@ static int __devinit fsl_ifc_ctrl_probe(struct platform_device *dev)
goto err_irq;
}
- ret = request_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_nand_irq, 0,
- "fsl-ifc-nand", fsl_ifc_ctrl_dev);
- if (ret != 0) {
- dev_err(&dev->dev, "failed to install irq (%d)\n",
- fsl_ifc_ctrl_dev->nand_irq);
- goto err_nandirq;
+ if (fsl_ifc_ctrl_dev->nand_irq) {
+ ret = request_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_nand_irq,
+ 0, "fsl-ifc-nand", fsl_ifc_ctrl_dev);
+ if (ret != 0) {
+ dev_err(&dev->dev, "failed to install irq (%d)\n",
+ fsl_ifc_ctrl_dev->nand_irq);
+ goto err_nandirq;
+ }
}
return 0;
diff --git a/arch/powerpc/sysdev/fsl_mpic_err.c b/arch/powerpc/sysdev/fsl_mpic_err.c
new file mode 100644
index 00000000000..b83f32562a3
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_mpic_err.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Varun Sethi <varun.sethi@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpic.h>
+
+#include "mpic.h"
+
+#define MPIC_ERR_INT_BASE 0x3900
+#define MPIC_ERR_INT_EISR 0x0000
+#define MPIC_ERR_INT_EIMR 0x0010
+
+static inline u32 mpic_fsl_err_read(u32 __iomem *base, unsigned int err_reg)
+{
+ return in_be32(base + (err_reg >> 2));
+}
+
+static inline void mpic_fsl_err_write(u32 __iomem *base, u32 value)
+{
+ out_be32(base + (MPIC_ERR_INT_EIMR >> 2), value);
+}
+
+static void fsl_mpic_mask_err(struct irq_data *d)
+{
+ u32 eimr;
+ struct mpic *mpic = irq_data_get_irq_chip_data(d);
+ unsigned int src = virq_to_hw(d->irq) - mpic->err_int_vecs[0];
+
+ eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
+ eimr |= (1 << (31 - src));
+ mpic_fsl_err_write(mpic->err_regs, eimr);
+}
+
+static void fsl_mpic_unmask_err(struct irq_data *d)
+{
+ u32 eimr;
+ struct mpic *mpic = irq_data_get_irq_chip_data(d);
+ unsigned int src = virq_to_hw(d->irq) - mpic->err_int_vecs[0];
+
+ eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
+ eimr &= ~(1 << (31 - src));
+ mpic_fsl_err_write(mpic->err_regs, eimr);
+}
+
+static struct irq_chip fsl_mpic_err_chip = {
+ .irq_disable = fsl_mpic_mask_err,
+ .irq_mask = fsl_mpic_mask_err,
+ .irq_unmask = fsl_mpic_unmask_err,
+};
+
+int mpic_setup_error_int(struct mpic *mpic, int intvec)
+{
+ int i;
+
+ mpic->err_regs = ioremap(mpic->paddr + MPIC_ERR_INT_BASE, 0x1000);
+ if (!mpic->err_regs) {
+ pr_err("could not map mpic error registers\n");
+ return -ENOMEM;
+ }
+ mpic->hc_err = fsl_mpic_err_chip;
+ mpic->hc_err.name = mpic->name;
+ mpic->flags |= MPIC_FSL_HAS_EIMR;
+ /* allocate interrupt vectors for error interrupts */
+ for (i = MPIC_MAX_ERR - 1; i >= 0; i--)
+ mpic->err_int_vecs[i] = --intvec;
+
+ return 0;
+}
+
+int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t hw)
+{
+ if ((mpic->flags & MPIC_FSL_HAS_EIMR) &&
+ (hw >= mpic->err_int_vecs[0] &&
+ hw <= mpic->err_int_vecs[MPIC_MAX_ERR - 1])) {
+ WARN_ON(mpic->flags & MPIC_SECONDARY);
+
+ pr_debug("mpic: mapping as Error Interrupt\n");
+ irq_set_chip_data(virq, mpic);
+ irq_set_chip_and_handler(virq, &mpic->hc_err,
+ handle_level_irq);
+ return 1;
+ }
+
+ return 0;
+}
+
+static irqreturn_t fsl_error_int_handler(int irq, void *data)
+{
+ struct mpic *mpic = (struct mpic *) data;
+ u32 eisr, eimr;
+ int errint;
+ unsigned int cascade_irq;
+
+ eisr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EISR);
+ eimr = mpic_fsl_err_read(mpic->err_regs, MPIC_ERR_INT_EIMR);
+
+ if (!(eisr & ~eimr))
+ return IRQ_NONE;
+
+ while (eisr) {
+ errint = __builtin_clz(eisr);
+ cascade_irq = irq_linear_revmap(mpic->irqhost,
+ mpic->err_int_vecs[errint]);
+ WARN_ON(cascade_irq == NO_IRQ);
+ if (cascade_irq != NO_IRQ) {
+ generic_handle_irq(cascade_irq);
+ } else {
+ eimr |= 1 << (31 - errint);
+ mpic_fsl_err_write(mpic->err_regs, eimr);
+ }
+ eisr &= ~(1 << (31 - errint));
+ }
+
+ return IRQ_HANDLED;
+}
+
+void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum)
+{
+ unsigned int virq;
+ int ret;
+
+ virq = irq_create_mapping(mpic->irqhost, irqnum);
+ if (virq == NO_IRQ) {
+ pr_err("Error interrupt setup failed\n");
+ return;
+ }
+
+ /* Mask all error interrupts */
+ mpic_fsl_err_write(mpic->err_regs, ~0);
+
+ ret = request_irq(virq, fsl_error_int_handler, IRQF_NO_THREAD,
+ "mpic-error-int", mpic);
+ if (ret)
+ pr_err("Failed to register error interrupt handler\n");
+}
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 6e097de00e0..51ffafae561 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -368,7 +368,7 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev)
int err, i, j, irq_index, count;
int rc;
const u32 *p;
- struct fsl_msi_feature *features;
+ const struct fsl_msi_feature *features;
int len;
u32 offset;
static const u32 all_avail[] = { 0, NR_MSI_IRQS };
@@ -502,15 +502,15 @@ static const struct fsl_msi_feature vmpic_msi_feature = {
static const struct of_device_id fsl_of_msi_ids[] = {
{
.compatible = "fsl,mpic-msi",
- .data = (void *)&mpic_msi_feature,
+ .data = &mpic_msi_feature,
},
{
.compatible = "fsl,ipic-msi",
- .data = (void *)&ipic_msi_feature,
+ .data = &ipic_msi_feature,
},
{
.compatible = "fsl,vmpic-msi",
- .data = (void *)&vmpic_msi_feature,
+ .data = &vmpic_msi_feature,
},
{}
};
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index a7b2a600d0a..ffb93ae9379 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -38,15 +38,15 @@ static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev)
{
- u8 progif;
+ u8 hdr_type;
/* if we aren't a PCIe don't bother */
if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
return;
/* if we aren't in host mode don't bother */
- pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
- if (progif & 0x1)
+ pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
+ if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
return;
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
@@ -143,18 +143,20 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
(u64)rsrc->start, (u64)resource_size(rsrc));
- if (of_device_is_compatible(hose->dn, "fsl,qoriq-pcie-v2.2")) {
- win_idx = 2;
- start_idx = 0;
- end_idx = 3;
- }
-
pci = ioremap(rsrc->start, resource_size(rsrc));
if (!pci) {
dev_err(hose->parent, "Unable to map ATMU registers\n");
return;
}
+ if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+ if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
+ win_idx = 2;
+ start_idx = 0;
+ end_idx = 3;
+ }
+ }
+
/* Disable all windows (except powar0 since it's ignored) */
for(i = 1; i < 5; i++)
out_be32(&pci->pow[i].powar, 0);
@@ -425,7 +427,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
struct pci_controller *hose;
struct resource rsrc;
const int *bus_range;
- u8 progif;
+ u8 hdr_type, progif;
if (!of_device_is_available(dev)) {
pr_warning("%s: disabled\n", dev->full_name);
@@ -457,15 +459,17 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
PPC_INDIRECT_TYPE_BIG_ENDIAN);
- early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
- if ((progif & 1) == 1) {
- /* unmap cfg_data & cfg_addr separately if not on same page */
- if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
- ((unsigned long)hose->cfg_addr & PAGE_MASK))
- iounmap(hose->cfg_data);
- iounmap(hose->cfg_addr);
- pcibios_free_controller(hose);
- return 0;
+ if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+ /* For PCIE read HEADER_TYPE to identify controler mode */
+ early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
+ if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+ goto no_bridge;
+
+ } else {
+ /* For PCI read PROG to identify controller mode */
+ early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
+ if ((progif & 1) == 1)
+ goto no_bridge;
}
setup_pci_cmd(hose);
@@ -494,6 +498,15 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
setup_pci_atmu(hose, &rsrc);
return 0;
+
+no_bridge:
+ /* unmap cfg_data & cfg_addr separately if not on same page */
+ if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
+ ((unsigned long)hose->cfg_addr & PAGE_MASK))
+ iounmap(hose->cfg_data);
+ iounmap(hose->cfg_addr);
+ pcibios_free_controller(hose);
+ return -ENODEV;
}
#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
@@ -818,6 +831,7 @@ static const struct of_device_id pci_ids[] = {
{ .compatible = "fsl,p1010-pcie", },
{ .compatible = "fsl,p1023-pcie", },
{ .compatible = "fsl,p4080-pcie", },
+ { .compatible = "fsl,qoriq-pcie-v2.4", },
{ .compatible = "fsl,qoriq-pcie-v2.3", },
{ .compatible = "fsl,qoriq-pcie-v2.2", },
{},
@@ -825,54 +839,80 @@ static const struct of_device_id pci_ids[] = {
struct device_node *fsl_pci_primary;
-void __devinit fsl_pci_init(void)
+void fsl_pci_assign_primary(void)
{
- struct device_node *node;
- struct pci_controller *hose;
- dma_addr_t max = 0xffffffff;
+ struct device_node *np;
/* Callers can specify the primary bus using other means. */
- if (!fsl_pci_primary) {
- /* If a PCI host bridge contains an ISA node, it's primary. */
- node = of_find_node_by_type(NULL, "isa");
- while ((fsl_pci_primary = of_get_parent(node))) {
- of_node_put(node);
- node = fsl_pci_primary;
-
- if (of_match_node(pci_ids, node))
- break;
- }
- }
+ if (fsl_pci_primary)
+ return;
- node = NULL;
- for_each_node_by_type(node, "pci") {
- if (of_match_node(pci_ids, node)) {
- /*
- * If there's no PCI host bridge with ISA, arbitrarily
- * designate one as primary. This can go away once
- * various bugs with primary-less systems are fixed.
- */
- if (!fsl_pci_primary)
- fsl_pci_primary = node;
+ /* If a PCI host bridge contains an ISA node, it's primary. */
+ np = of_find_node_by_type(NULL, "isa");
+ while ((fsl_pci_primary = of_get_parent(np))) {
+ of_node_put(np);
+ np = fsl_pci_primary;
- fsl_add_bridge(node, fsl_pci_primary == node);
- hose = pci_find_hose_for_OF_device(node);
- max = min(max, hose->dma_window_base_cur +
- hose->dma_window_size);
- }
+ if (of_match_node(pci_ids, np) && of_device_is_available(np))
+ return;
}
-#ifdef CONFIG_SWIOTLB
/*
- * if we couldn't map all of DRAM via the dma windows
- * we need SWIOTLB to handle buffers located outside of
- * dma capable memory region
+ * If there's no PCI host bridge with ISA, arbitrarily
+ * designate one as primary. This can go away once
+ * various bugs with primary-less systems are fixed.
*/
- if (memblock_end_of_DRAM() - 1 > max) {
- ppc_swiotlb_enable = 1;
- set_pci_dma_ops(&swiotlb_dma_ops);
- ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ for_each_matching_node(np, pci_ids) {
+ if (of_device_is_available(np)) {
+ fsl_pci_primary = np;
+ of_node_put(np);
+ return;
+ }
+ }
+}
+
+static int __devinit fsl_pci_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device_node *node;
+#ifdef CONFIG_SWIOTLB
+ struct pci_controller *hose;
+#endif
+
+ node = pdev->dev.of_node;
+ ret = fsl_add_bridge(node, fsl_pci_primary == node);
+
+#ifdef CONFIG_SWIOTLB
+ if (ret == 0) {
+ hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
+
+ /*
+ * if we couldn't map all of DRAM via the dma windows
+ * we need SWIOTLB to handle buffers located outside of
+ * dma capable memory region
+ */
+ if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur +
+ hose->dma_window_size)
+ ppc_swiotlb_enable = 1;
}
#endif
+
+ mpc85xx_pci_err_probe(pdev);
+
+ return 0;
+}
+
+static struct platform_driver fsl_pci_driver = {
+ .driver = {
+ .name = "fsl-pci",
+ .of_match_table = pci_ids,
+ },
+ .probe = fsl_pci_probe,
+};
+
+static int __init fsl_pci_init(void)
+{
+ return platform_driver_register(&fsl_pci_driver);
}
+arch_initcall(fsl_pci_init);
#endif
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index baa0fd18289..d078537adec 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -16,6 +16,7 @@
#define PCIE_LTSSM 0x0404 /* PCIE Link Training and Status */
#define PCIE_LTSSM_L0 0x16 /* L0 state */
+#define PCIE_IP_REV_2_2 0x02080202 /* PCIE IP block version Rev2.2 */
#define PIWAR_EN 0x80000000 /* Enable */
#define PIWAR_PF 0x20000000 /* prefetch */
#define PIWAR_TGI_LOCAL 0x00f00000 /* target - local memory */
@@ -57,7 +58,9 @@ struct ccsr_pci {
__be32 pex_pme_mes_disr; /* 0x.024 - PCIE PME and message disable register */
__be32 pex_pme_mes_ier; /* 0x.028 - PCIE PME and message interrupt enable register */
__be32 pex_pmcr; /* 0x.02c - PCIE power management command register */
- u8 res3[3024];
+ u8 res3[3016];
+ __be32 block_rev1; /* 0x.bf8 - PCIE Block Revision register 1 */
+ __be32 block_rev2; /* 0x.bfc - PCIE Block Revision register 2 */
/* PCI/PCI Express outbound window 0-4
* Window 0 is the default window and is the only window enabled upon reset.
@@ -95,10 +98,19 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose);
extern struct device_node *fsl_pci_primary;
-#ifdef CONFIG_FSL_PCI
-void fsl_pci_init(void);
+#ifdef CONFIG_PCI
+void fsl_pci_assign_primary(void);
#else
-static inline void fsl_pci_init(void) {}
+static inline void fsl_pci_assign_primary(void) {}
+#endif
+
+#ifdef CONFIG_EDAC_MPC85XX
+int mpc85xx_pci_err_probe(struct platform_device *op);
+#else
+static inline int mpc85xx_pci_err_probe(struct platform_device *op)
+{
+ return -ENOTSUPP;
+}
#endif
#endif /* __POWERPC_FSL_PCI_H */
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index bfc6211e542..9c6e535daad 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -6,7 +6,7 @@
* with various broken implementations of this HW.
*
* Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
@@ -221,24 +221,24 @@ static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 valu
_mpic_write(mpic->reg_type, &mpic->gregs, offset, value);
}
-static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
+static inline unsigned int mpic_tm_offset(struct mpic *mpic, unsigned int tm)
{
- unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
- ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
+ return (tm >> 2) * MPIC_TIMER_GROUP_STRIDE +
+ (tm & 3) * MPIC_INFO(TIMER_STRIDE);
+}
- if (tm >= 4)
- offset += 0x1000 / 4;
+static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
+{
+ unsigned int offset = mpic_tm_offset(mpic, tm) +
+ MPIC_INFO(TIMER_VECTOR_PRI);
return _mpic_read(mpic->reg_type, &mpic->tmregs, offset);
}
static inline void _mpic_tm_write(struct mpic *mpic, unsigned int tm, u32 value)
{
- unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
- ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
-
- if (tm >= 4)
- offset += 0x1000 / 4;
+ unsigned int offset = mpic_tm_offset(mpic, tm) +
+ MPIC_INFO(TIMER_VECTOR_PRI);
_mpic_write(mpic->reg_type, &mpic->tmregs, offset, value);
}
@@ -1026,6 +1026,9 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
return 0;
}
+ if (mpic_map_error_int(mpic, virq, hw))
+ return 0;
+
if (hw >= mpic->num_sources)
return -EINVAL;
@@ -1085,7 +1088,16 @@ static int mpic_host_xlate(struct irq_domain *h, struct device_node *ct,
*/
switch (intspec[2]) {
case 0:
- case 1: /* no EISR/EIMR support for now, treat as shared IRQ */
+ break;
+ case 1:
+ if (!(mpic->flags & MPIC_FSL_HAS_EIMR))
+ break;
+
+ if (intspec[3] >= ARRAY_SIZE(mpic->err_int_vecs))
+ return -EINVAL;
+
+ *out_hwirq = mpic->err_int_vecs[intspec[3]];
+
break;
case 2:
if (intspec[0] >= ARRAY_SIZE(mpic->ipi_vecs))
@@ -1301,6 +1313,42 @@ struct mpic * __init mpic_alloc(struct device_node *node,
mpic_map(mpic, mpic->paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+ if (mpic->flags & MPIC_FSL) {
+ u32 brr1, version;
+ int ret;
+
+ /*
+ * Yes, Freescale really did put global registers in the
+ * magic per-cpu area -- and they don't even show up in the
+ * non-magic per-cpu copies that this driver normally uses.
+ */
+ mpic_map(mpic, mpic->paddr, &mpic->thiscpuregs,
+ MPIC_CPU_THISBASE, 0x1000);
+
+ brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs,
+ MPIC_FSL_BRR1);
+ version = brr1 & MPIC_FSL_BRR1_VER;
+
+ /* Error interrupt mask register (EIMR) is required for
+ * handling individual device error interrupts. EIMR
+ * was added in MPIC version 4.1.
+ *
+ * Over here we reserve vector number space for error
+ * interrupt vectors. This space is stolen from the
+ * global vector number space, as in case of ipis
+ * and timer interrupts.
+ *
+ * Available vector space = intvec_top - 12, where 12
+ * is the number of vectors which have been consumed by
+ * ipis and timer interrupts.
+ */
+ if (version >= 0x401) {
+ ret = mpic_setup_error_int(mpic, intvec_top - 12);
+ if (ret)
+ return NULL;
+ }
+ }
+
/* Reset */
/* When using a device-node, reset requests are only honored if the MPIC
@@ -1440,6 +1488,7 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
void __init mpic_init(struct mpic *mpic)
{
int i, cpu;
+ int num_timers = 4;
BUG_ON(mpic->num_sources == 0);
@@ -1448,15 +1497,34 @@ void __init mpic_init(struct mpic *mpic)
/* Set current processor priority to max */
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
+ if (mpic->flags & MPIC_FSL) {
+ u32 brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs,
+ MPIC_FSL_BRR1);
+ u32 version = brr1 & MPIC_FSL_BRR1_VER;
+
+ /*
+ * Timer group B is present at the latest in MPIC 3.1 (e.g.
+ * mpc8536). It is not present in MPIC 2.0 (e.g. mpc8544).
+ * I don't know about the status of intermediate versions (or
+ * whether they even exist).
+ */
+ if (version >= 0x0301)
+ num_timers = 8;
+ }
+
+ /* FSL mpic error interrupt intialization */
+ if (mpic->flags & MPIC_FSL_HAS_EIMR)
+ mpic_err_int_init(mpic, MPIC_FSL_ERR_INT);
+
/* Initialize timers to our reserved vectors and mask them for now */
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < num_timers; i++) {
+ unsigned int offset = mpic_tm_offset(mpic, i);
+
mpic_write(mpic->tmregs,
- i * MPIC_INFO(TIMER_STRIDE) +
- MPIC_INFO(TIMER_DESTINATION),
+ offset + MPIC_INFO(TIMER_DESTINATION),
1 << hard_smp_processor_id());
mpic_write(mpic->tmregs,
- i * MPIC_INFO(TIMER_STRIDE) +
- MPIC_INFO(TIMER_VECTOR_PRI),
+ offset + MPIC_INFO(TIMER_VECTOR_PRI),
MPIC_VECPRI_MASK |
(9 << MPIC_VECPRI_PRIORITY_SHIFT) |
(mpic->timer_vecs[0] + i));
diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h
index 13f3e8913a9..24bf07a6392 100644
--- a/arch/powerpc/sysdev/mpic.h
+++ b/arch/powerpc/sysdev/mpic.h
@@ -40,4 +40,26 @@ extern int mpic_set_affinity(struct irq_data *d,
const struct cpumask *cpumask, bool force);
extern void mpic_reset_core(int cpu);
+#ifdef CONFIG_FSL_SOC
+extern int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t hw);
+extern void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum);
+extern int mpic_setup_error_int(struct mpic *mpic, int intvec);
+#else
+static inline int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t hw)
+{
+ return 0;
+}
+
+
+static inline void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum)
+{
+ return;
+}
+
+static inline int mpic_setup_error_int(struct mpic *mpic, int intvec)
+{
+ return -1;
+}
+#endif
+
#endif /* _POWERPC_SYSDEV_MPIC_H */
diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index 483d8fa72e8..e961f8c4a8f 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -14,6 +14,9 @@
#include <linux/list.h>
#include <linux/of_platform.h>
#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c
index 14469cf9df6..df0fc582146 100644
--- a/arch/powerpc/sysdev/xics/icp-hv.c
+++ b/arch/powerpc/sysdev/xics/icp-hv.c
@@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value)
static inline void icp_hv_set_qirr(int n_cpu , u8 value)
{
int hw_cpu = get_hard_smp_processor_id(n_cpu);
- long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+ long rc;
+
+ /* Make sure all previous accesses are ordered before IPI sending */
+ mb();
+ rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
if (rc != H_SUCCESS) {
pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
"returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 18:51:17 +0000