diff options
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/Kconfig | 7 | ||||
-rw-r--r-- | arch/powerpc/include/asm/fsl_lbc.h | 34 | ||||
-rw-r--r-- | arch/powerpc/sysdev/fsl_lbc.c | 244 |
3 files changed, 246 insertions, 39 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c7e40b37aa6..b6447190e1a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -682,9 +682,12 @@ config 4xx_SOC bool config FSL_LBC - bool + bool "Freescale Local Bus support" + depends on FSL_SOC help - Freescale Localbus support + Enables reporting of errors from the Freescale local bus + controller. Also contains some common code used by + drivers for specific local bus peripherals. config FSL_GTM bool diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 1b5a21041f9..5c1bf346674 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -1,9 +1,10 @@ /* Freescale Local Bus Controller * - * Copyright (c) 2006-2007 Freescale Semiconductor + * Copyright © 2006-2007, 2010 Freescale Semiconductor * * Authors: Nick Spence <nick.spence@freescale.com>, * Scott Wood <scottwood@freescale.com> + * Jack Lan <jack.lan@freescale.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,6 +27,8 @@ #include <linux/compiler.h> #include <linux/types.h> #include <linux/io.h> +#include <linux/device.h> +#include <linux/spinlock.h> struct fsl_lbc_bank { __be32 br; /**< Base Register */ @@ -125,13 +128,23 @@ struct fsl_lbc_regs { #define LTESR_ATMW 0x00800000 #define LTESR_ATMR 0x00400000 #define LTESR_CS 0x00080000 +#define LTESR_UPM 0x00000002 #define LTESR_CC 0x00000001 #define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) +#define LTESR_MASK (LTESR_BM | LTESR_FCT | LTESR_PAR | LTESR_WP \ + | LTESR_ATMW | LTESR_ATMR | LTESR_CS | LTESR_UPM \ + | LTESR_CC) +#define LTESR_CLEAR 0xFFFFFFFF +#define LTECCR_CLEAR 0xFFFFFFFF +#define LTESR_STATUS LTESR_MASK +#define LTEIR_ENABLE LTESR_MASK +#define LTEDR_ENABLE 0x00000000 __be32 ltedr; /**< Transfer Error Disable Register */ __be32 lteir; /**< Transfer Error Interrupt Register */ __be32 lteatr; /**< Transfer Error Attributes Register */ __be32 ltear; /**< Transfer Error Address Register */ - u8 res6[0xC]; + __be32 lteccr; /**< Transfer Error ECC Register */ + u8 res6[0x8]; __be32 lbcr; /**< Configuration Register */ #define LBCR_LDIS 0x80000000 #define LBCR_LDIS_SHIFT 31 @@ -235,6 +248,7 @@ struct fsl_upm { int width; }; +extern u32 fsl_lbc_addr(phys_addr_t addr_base); extern int fsl_lbc_find(phys_addr_t addr_base); extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm); @@ -265,7 +279,23 @@ static inline void fsl_upm_end_pattern(struct fsl_upm *upm) cpu_relax(); } +/* overview of the fsl lbc controller */ + +struct fsl_lbc_ctrl { + /* device info */ + struct device *dev; + struct fsl_lbc_regs __iomem *regs; + int irq; + wait_queue_head_t irq_wait; + spinlock_t lock; + void *nand; + + /* status read from LTESR by irq handler */ + unsigned int irq_status; +}; + extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar); +extern struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev; #endif /* __ASM_FSL_LBC_H */ diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index dceb8d1a843..4fcb5a4e60d 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -1,9 +1,12 @@ /* * Freescale LBC and UPM routines. * - * Copyright (c) 2007-2008 MontaVista Software, Inc. + * Copyright © 2007-2008 MontaVista Software, Inc. + * Copyright © 2010 Freescale Semiconductor * * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * Author: Jack Lan <Jack.Lan@freescale.com> + * Author: Roy Zang <tie-fei.zang@freescale.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,39 +22,37 @@ #include <linux/types.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/mod_devicetable.h> #include <asm/prom.h> #include <asm/fsl_lbc.h> static spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock); -static struct fsl_lbc_regs __iomem *fsl_lbc_regs; +struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev; +EXPORT_SYMBOL(fsl_lbc_ctrl_dev); -static char __initdata *compat_lbc[] = { - "fsl,pq2-localbus", - "fsl,pq2pro-localbus", - "fsl,pq3-localbus", - "fsl,elbc", -}; - -static int __init fsl_lbc_init(void) +/** + * fsl_lbc_addr - convert the base address + * @addr_base: base address of the memory bank + * + * This function converts a base address of lbc into the right format for the + * BR register. If the SOC has eLBC then it returns 32bit physical address + * else it convers a 34bit local bus physical address to correct format of + * 32bit address for BR register (Example: MPC8641). + */ +u32 fsl_lbc_addr(phys_addr_t addr_base) { - struct device_node *lbus; - int i; + struct device_node *np = fsl_lbc_ctrl_dev->dev->of_node; + u32 addr = addr_base & 0xffff8000; - for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) { - lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]); - if (lbus) - goto found; - } - return -ENODEV; + if (of_device_is_compatible(np, "fsl,elbc")) + return addr; -found: - fsl_lbc_regs = of_iomap(lbus, 0); - of_node_put(lbus); - if (!fsl_lbc_regs) - return -ENOMEM; - return 0; + return addr | ((addr_base & 0x300000000ull) >> 19); } -arch_initcall(fsl_lbc_init); +EXPORT_SYMBOL(fsl_lbc_addr); /** * fsl_lbc_find - find Localbus bank @@ -65,15 +66,17 @@ arch_initcall(fsl_lbc_init); int fsl_lbc_find(phys_addr_t addr_base) { int i; + struct fsl_lbc_regs __iomem *lbc; - if (!fsl_lbc_regs) + if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs) return -ENODEV; - for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) { - __be32 br = in_be32(&fsl_lbc_regs->bank[i].br); - __be32 or = in_be32(&fsl_lbc_regs->bank[i].or); + lbc = fsl_lbc_ctrl_dev->regs; + for (i = 0; i < ARRAY_SIZE(lbc->bank); i++) { + __be32 br = in_be32(&lbc->bank[i].br); + __be32 or = in_be32(&lbc->bank[i].or); - if (br & BR_V && (br & or & BR_BA) == addr_base) + if (br & BR_V && (br & or & BR_BA) == fsl_lbc_addr(addr_base)) return i; } @@ -94,22 +97,27 @@ int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm) { int bank; __be32 br; + struct fsl_lbc_regs __iomem *lbc; bank = fsl_lbc_find(addr_base); if (bank < 0) return bank; - br = in_be32(&fsl_lbc_regs->bank[bank].br); + if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs) + return -ENODEV; + + lbc = fsl_lbc_ctrl_dev->regs; + br = in_be32(&lbc->bank[bank].br); switch (br & BR_MSEL) { case BR_MS_UPMA: - upm->mxmr = &fsl_lbc_regs->mamr; + upm->mxmr = &lbc->mamr; break; case BR_MS_UPMB: - upm->mxmr = &fsl_lbc_regs->mbmr; + upm->mxmr = &lbc->mbmr; break; case BR_MS_UPMC: - upm->mxmr = &fsl_lbc_regs->mcmr; + upm->mxmr = &lbc->mcmr; break; default: return -EINVAL; @@ -148,9 +156,12 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) int ret = 0; unsigned long flags; + if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs) + return -ENODEV; + spin_lock_irqsave(&fsl_lbc_lock, flags); - out_be32(&fsl_lbc_regs->mar, mar); + out_be32(&fsl_lbc_ctrl_dev->regs->mar, mar); switch (upm->width) { case 8: @@ -172,3 +183,166 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) return ret; } EXPORT_SYMBOL(fsl_upm_run_pattern); + +static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl) +{ + struct fsl_lbc_regs __iomem *lbc = ctrl->regs; + + /* clear event registers */ + setbits32(&lbc->ltesr, LTESR_CLEAR); + out_be32(&lbc->lteatr, 0); + out_be32(&lbc->ltear, 0); + out_be32(&lbc->lteccr, LTECCR_CLEAR); + out_be32(&lbc->ltedr, LTEDR_ENABLE); + + /* Enable interrupts for any detected events */ + out_be32(&lbc->lteir, LTEIR_ENABLE); + + return 0; +} + +/* + * NOTE: This interrupt is used to report localbus events of various kinds, + * such as transaction errors on the chipselects. + */ + +static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data) +{ + struct fsl_lbc_ctrl *ctrl = data; + struct fsl_lbc_regs __iomem *lbc = ctrl->regs; + u32 status; + + status = in_be32(&lbc->ltesr); + if (!status) + return IRQ_NONE; + + out_be32(&lbc->ltesr, LTESR_CLEAR); + out_be32(&lbc->lteatr, 0); + out_be32(&lbc->ltear, 0); + ctrl->irq_status = status; + + if (status & LTESR_BM) + dev_err(ctrl->dev, "Local bus monitor time-out: " + "LTESR 0x%08X\n", status); + if (status & LTESR_WP) + dev_err(ctrl->dev, "Write protect error: " + "LTESR 0x%08X\n", status); + if (status & LTESR_ATMW) + dev_err(ctrl->dev, "Atomic write error: " + "LTESR 0x%08X\n", status); + if (status & LTESR_ATMR) + dev_err(ctrl->dev, "Atomic read error: " + "LTESR 0x%08X\n", status); + if (status & LTESR_CS) + dev_err(ctrl->dev, "Chip select error: " + "LTESR 0x%08X\n", status); + if (status & LTESR_UPM) + ; + if (status & LTESR_FCT) { + dev_err(ctrl->dev, "FCM command time-out: " + "LTESR 0x%08X\n", status); + smp_wmb(); + wake_up(&ctrl->irq_wait); + } + if (status & LTESR_PAR) { + dev_err(ctrl->dev, "Parity or Uncorrectable ECC error: " + "LTESR 0x%08X\n", status); + smp_wmb(); + wake_up(&ctrl->irq_wait); + } + if (status & LTESR_CC) { + smp_wmb(); + wake_up(&ctrl->irq_wait); + } + if (status & ~LTESR_MASK) + dev_err(ctrl->dev, "Unknown error: " + "LTESR 0x%08X\n", status); + return IRQ_HANDLED; +} + +/* + * fsl_lbc_ctrl_probe + * + * called by device layer when it finds a device matching + * one our driver can handled. This code allocates all of + * the resources needed for the controller only. The + * resources for the NAND banks themselves are allocated + * in the chip probe function. +*/ + +static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev) +{ + int ret; + + if (!dev->dev.of_node) { + dev_err(&dev->dev, "Device OF-Node is NULL"); + return -EFAULT; + } + + fsl_lbc_ctrl_dev = kzalloc(sizeof(*fsl_lbc_ctrl_dev), GFP_KERNEL); + if (!fsl_lbc_ctrl_dev) + return -ENOMEM; + + dev_set_drvdata(&dev->dev, fsl_lbc_ctrl_dev); + + spin_lock_init(&fsl_lbc_ctrl_dev->lock); + init_waitqueue_head(&fsl_lbc_ctrl_dev->irq_wait); + + fsl_lbc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0); + if (!fsl_lbc_ctrl_dev->regs) { + dev_err(&dev->dev, "failed to get memory region\n"); + ret = -ENODEV; + goto err; + } + + fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0); + if (fsl_lbc_ctrl_dev->irq == NO_IRQ) { + dev_err(&dev->dev, "failed to get irq resource\n"); + ret = -ENODEV; + goto err; + } + + fsl_lbc_ctrl_dev->dev = &dev->dev; + + ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev); + if (ret < 0) + goto err; + + ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0, + "fsl-lbc", fsl_lbc_ctrl_dev); + if (ret != 0) { + dev_err(&dev->dev, "failed to install irq (%d)\n", + fsl_lbc_ctrl_dev->irq); + ret = fsl_lbc_ctrl_dev->irq; + goto err; + } + + return 0; + +err: + iounmap(fsl_lbc_ctrl_dev->regs); + kfree(fsl_lbc_ctrl_dev); + return ret; +} + +static const struct of_device_id fsl_lbc_match[] = { + { .compatible = "fsl,elbc", }, + { .compatible = "fsl,pq3-localbus", }, + { .compatible = "fsl,pq2-localbus", }, + { .compatible = "fsl,pq2pro-localbus", }, + {}, +}; + +static struct platform_driver fsl_lbc_ctrl_driver = { + .driver = { + .name = "fsl-lbc", + .of_match_table = fsl_lbc_match, + }, + .probe = fsl_lbc_ctrl_probe, +}; + +static int __init fsl_lbc_init(void) +{ + return platform_driver_register(&fsl_lbc_ctrl_driver); +} +module_init(fsl_lbc_init); |