diff options
Diffstat (limited to 'arch/powerpc')
25 files changed, 638 insertions, 680 deletions
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 3d2f5a06df3..6d721900d00 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -11,7 +11,7 @@ / { model = "MPC8313ERDB"; - compatible = "MPC83xx"; + compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB"; #address-cells = <1>; #size-cells = <1>; @@ -59,7 +59,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <e 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -68,7 +68,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <f 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -77,7 +77,7 @@ compatible = "mpc83xx_spi"; reg = <7000 1000>; interrupts = <10 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; mode = <0>; }; @@ -88,8 +88,8 @@ reg = <23000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; + interrupt-parent = < &ipic >; + interrupts = <26 8>; phy_type = "utmi_wide"; }; @@ -99,18 +99,15 @@ reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <24520>; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <700>; - interrupts = <13 2>; + phy1: ethernet-phy@1 { + interrupt-parent = < &ipic >; + interrupts = <13 8>; reg = <1>; device_type = "ethernet-phy"; }; - ethernet-phy@4 { - linux,phandle = <2452004>; - interrupt-parent = <700>; - interrupts = <14 2>; + phy4: ethernet-phy@4 { + interrupt-parent = < &ipic >; + interrupts = <14 8>; reg = <4>; device_type = "ethernet-phy"; }; @@ -123,8 +120,8 @@ reg = <24000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <25 8 24 8 23 8>; - interrupt-parent = <700>; - phy-handle = <2452001>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1 >; }; ethernet@25000 { @@ -134,8 +131,8 @@ reg = <25000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <22 8 21 8 20 8>; - interrupt-parent = <700>; - phy-handle = <2452004>; + interrupt-parent = < &ipic >; + phy-handle = < &phy4 >; }; serial@4500 { @@ -144,7 +141,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -153,7 +150,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = <a 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; pci@8500 { @@ -161,17 +158,17 @@ interrupt-map = < /* IDSEL 0x0E -mini PCI */ - 7000 0 0 1 700 12 8 - 7000 0 0 2 700 12 8 - 7000 0 0 3 700 12 8 - 7000 0 0 4 700 12 8 + 7000 0 0 1 &ipic 12 8 + 7000 0 0 2 &ipic 12 8 + 7000 0 0 3 &ipic 12 8 + 7000 0 0 4 &ipic 12 8 /* IDSEL 0x0F - PCI slot */ - 7800 0 0 1 700 11 8 - 7800 0 0 2 700 12 8 - 7800 0 0 3 700 11 8 - 7800 0 0 4 700 12 8>; - interrupt-parent = <700>; + 7800 0 0 1 &ipic 11 8 + 7800 0 0 2 &ipic 12 8 + 7800 0 0 3 &ipic 11 8 + 7800 0 0 4 &ipic 12 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 90000000 90000000 0 10000000 @@ -192,7 +189,7 @@ compatible = "talitos"; reg = <30000 7000>; interrupts = <b 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; /* Rev. 2.2 */ num-channels = <1>; channel-fifo-len = <18>; @@ -206,8 +203,7 @@ * sense == 8: Level, low assertion * sense == 2: Edge, high-to-low change */ - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 57a3665f82e..06b310698a0 100644 --- a/arch/powerpc/boot/dts/mpc8323emds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -11,16 +11,14 @@ / { model = "MPC8323EMDS"; - compatible = "MPC83xx"; + compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8323@0 { device_type = "cpu"; @@ -33,13 +31,11 @@ bus-frequency = <0>; clock-frequency = <0>; 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 08000000>; }; @@ -68,7 +64,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <e 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -78,7 +74,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -87,7 +83,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = <a 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; crypto@30000 { @@ -96,7 +92,7 @@ compatible = "talitos"; reg = <30000 7000>; interrupts = <b 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; /* Rev. 2.2 */ num-channels = <1>; channel-fifo-len = <18>; @@ -105,51 +101,50 @@ }; pci@8500 { - linux,phandle = <8500>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x11 AD17 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 /* IDSEL 0x12 AD18 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 /* IDSEL 0x13 AD19 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 /* IDSEL 0x15 AD21*/ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 /* IDSEL 0x16 AD22*/ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 /* IDSEL 0x17 AD23*/ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 /* IDSEL 0x18 AD24*/ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 a0000000 90000000 0 10000000 @@ -164,8 +159,7 @@ device_type = "pci"; }; - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; @@ -179,8 +173,7 @@ device_type = "par_io"; num-ports = <7>; - ucc_pin@03 { - linux,phandle = <140003>; + pio3: ucc_pin@03 { pio-map = < /* port pin dir open_drain assignment has_irq */ 3 4 3 0 2 0 /* MDIO */ @@ -203,8 +196,7 @@ 1 c 1 0 1 0 /* TX_EN */ 1 d 2 0 1 0>;/* CRS */ }; - ucc_pin@04 { - linux,phandle = <140004>; + pio4: ucc_pin@04 { pio-map = < /* port pin dir open_drain assignment has_irq */ 3 1f 2 0 1 0 /* RX_CLK (CLK7) */ @@ -251,7 +243,7 @@ compatible = "fsl_spi"; reg = <4c0 40>; interrupts = <2>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "cpu"; }; @@ -260,7 +252,7 @@ compatible = "fsl_spi"; reg = <500 40>; interrupts = <1>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "cpu"; }; @@ -269,7 +261,7 @@ compatible = "qe_udc"; reg = <6c0 40 8B00 100>; interrupts = <b>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "slave"; }; @@ -280,12 +272,12 @@ device-id = <3>; reg = <2200 200>; interrupts = <22>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mac-address = [ 00 04 9f 00 23 23 ]; rx-clock = <19>; tx-clock = <1a>; - phy-handle = <212003>; - pio-handle = <140003>; + phy-handle = < &phy3 >; + pio-handle = < &pio3 >; }; ucc@3200 { @@ -295,12 +287,12 @@ device-id = <4>; reg = <3000 200>; interrupts = <23>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mac-address = [ 00 11 22 33 44 55 ]; rx-clock = <17>; tx-clock = <18>; - phy-handle = <212004>; - pio-handle = <140004>; + phy-handle = < &phy4 >; + pio-handle = < &pio4 >; }; mdio@2320 { @@ -310,26 +302,23 @@ device_type = "mdio"; compatible = "ucc_geth_phy"; - ethernet-phy@03 { - linux,phandle = <212003>; - interrupt-parent = <700>; - interrupts = <11 2>; + phy3: ethernet-phy@03 { + interrupt-parent = < &ipic >; + interrupts = <11 8>; reg = <3>; device_type = "ethernet-phy"; interface = <3>; //ENET_100_MII }; - ethernet-phy@04 { - linux,phandle = <212004>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy4: ethernet-phy@04 { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <4>; device_type = "ethernet-phy"; interface = <3>; }; }; - qeic@80 { - linux,phandle = <80>; + qeic: qeic@80 { interrupt-controller; device_type = "qeic"; #address-cells = <0>; @@ -338,7 +327,7 @@ built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 27807fc4588..61b550bf164 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -10,7 +10,7 @@ */ / { model = "MPC8349EMITX"; - compatible = "MPC834xMITX"; + compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX"; #address-cells = <1>; #size-cells = <1>; @@ -58,7 +58,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <e 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -67,7 +67,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <f 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -76,7 +76,7 @@ compatible = "mpc83xx_spi"; reg = <7000 1000>; interrupts = <10 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; mode = <0>; }; @@ -86,8 +86,8 @@ reg = <22000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 2>; + interrupt-parent = < &ipic >; + interrupts = <27 8>; phy_type = "ulpi"; port1; }; @@ -98,8 +98,8 @@ reg = <23000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; + interrupt-parent = < &ipic >; + interrupts = <26 8>; phy_type = "ulpi"; }; @@ -109,22 +109,19 @@ reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <24520>; /* Vitesse 8201 */ - ethernet-phy@1c { - linux,phandle = <245201c>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1c: ethernet-phy@1c { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1c>; device_type = "ethernet-phy"; }; /* Vitesse 7385 */ - ethernet-phy@1f { - linux,phandle = <245201f>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1f: ethernet-phy@1f { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1f>; device_type = "ethernet-phy"; }; @@ -138,8 +135,8 @@ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; - interrupt-parent = <700>; - phy-handle = <245201c>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1c >; }; ethernet@25000 { @@ -152,8 +149,8 @@ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 8 24 8 25 8>; - interrupt-parent = <700>; - phy-handle = <245201f>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1f >; }; serial@4500 { @@ -162,7 +159,7 @@ reg = <4500 100>; clock-frequency = <0>; // from bootloader interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -171,16 +168,16 @@ reg = <4600 100>; clock-frequency = <0>; // from bootloader interrupts = <a 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; pci@8500 { interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x10 - SATA */ - 8000 0 0 1 700 16 8 /* SATA_INTA */ + 8000 0 0 1 &ipic 16 8 /* SATA_INTA */ >; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <42000000 0 80000000 80000000 0 10000000 @@ -199,13 +196,13 @@ interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x0E - MiniPCI Slot */ - 7000 0 0 1 700 15 8 /* PCI_INTA */ + 7000 0 0 1 &ipic 15 8 /* PCI_INTA */ /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 700 14 8 /* PCI_INTA */ - 7800 0 0 2 700 15 8 /* PCI_INTB */ + 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ + 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ >; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; interrupts = <43 8>; bus-range = <1 1>; ranges = <42000000 0 a0000000 a0000000 0 10000000 @@ -226,15 +223,14 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = <b 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; descriptor-types-mask = <01010ebf>; }; - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 3190774de1d..b2e1a5ec377 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -10,7 +10,7 @@ */ / { model = "MPC8349EMITXGP"; - compatible = "MPC834xMITXGP"; + compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX"; #address-cells = <1>; #size-cells = <1>; @@ -58,7 +58,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <e 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -67,7 +67,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <f 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -76,7 +76,7 @@ compatible = "mpc83xx_spi"; reg = <7000 1000>; interrupts = <10 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; mode = <0>; }; @@ -86,8 +86,8 @@ reg = <23000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; + interrupt-parent = < &ipic >; + interrupts = <26 8>; dr_mode = "otg"; phy_type = "ulpi"; }; @@ -98,13 +98,11 @@ reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <24520>; /* Vitesse 8201 */ - ethernet-phy@1c { - linux,phandle = <245201c>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1c: ethernet-phy@1c { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1c>; device_type = "ethernet-phy"; }; @@ -117,8 +115,8 @@ reg = <24000 1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; - interrupt-parent = <700>; - phy-handle = <245201c>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1c >; }; serial@4500 { @@ -127,7 +125,7 @@ reg = <4500 100>; clock-frequency = <0>; // from bootloader interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -136,17 +134,17 @@ reg = <4600 100>; clock-frequency = <0>; // from bootloader interrupts = <a 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; pci@8600 { interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 700 14 8 /* PCI_INTA */ - 7800 0 0 2 700 15 8 /* PCI_INTB */ + 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ + 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ >; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; interrupts = <43 8>; bus-range = <1 1>; ranges = <42000000 0 a0000000 a0000000 0 10000000 @@ -167,15 +165,14 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = <b 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; descriptor-types-mask = <01010ebf>; }; - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index dc121b3cb4a..e4b43c24bc0 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -11,7 +11,7 @@ / { model = "MPC8349EMDS"; - compatible = "MPC834xMDS"; + compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS"; #address-cells = <1>; #size-cells = <1>; @@ -64,7 +64,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <e 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -73,7 +73,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <f 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -82,7 +82,7 @@ compatible = "mpc83xx_spi"; reg = <7000 1000>; interrupts = <10 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; mode = <0>; }; @@ -94,8 +94,8 @@ reg = <22000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 2>; + interrupt-parent = < &ipic >; + interrupts = <27 8>; phy_type = "ulpi"; port1; }; @@ -106,8 +106,8 @@ reg = <23000 1000>; #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 2>; + interrupt-parent = < &ipic >; + interrupts = <26 8>; dr_mode = "otg"; phy_type = "ulpi"; }; @@ -118,18 +118,15 @@ reg = <24520 20>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <24520>; - ethernet-phy@0 { - linux,phandle = <2452000>; - interrupt-parent = <700>; - interrupts = <11 2>; + phy0: ethernet-phy@0 { + interrupt-parent = < &ipic >; + interrupts = <11 8>; reg = <0>; device_type = "ethernet-phy"; }; - ethernet-phy@1 { - linux,phandle = <2452001>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1: ethernet-phy@1 { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1>; device_type = "ethernet-phy"; }; @@ -143,8 +140,8 @@ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <20 8 21 8 22 8>; - interrupt-parent = <700>; - phy-handle = <2452000>; + interrupt-parent = < &ipic >; + phy-handle = < &phy0 >; }; ethernet@25000 { @@ -157,8 +154,8 @@ address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <23 8 24 8 25 8>; - interrupt-parent = <700>; - phy-handle = <2452001>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1 >; }; serial@4500 { @@ -167,7 +164,7 @@ reg = <4500 100>; clock-frequency = <0>; interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -176,7 +173,7 @@ reg = <4600 100>; clock-frequency = <0>; interrupts = <a 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; pci@8500 { @@ -184,47 +181,47 @@ interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 10000000 @@ -244,47 +241,47 @@ interrupt-map = < /* IDSEL 0x11 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 /* IDSEL 0x12 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 /* IDSEL 0x13 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 /* IDSEL 0x15 */ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 /* IDSEL 0x16 */ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 /* IDSEL 0x17 */ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 /* IDSEL 0x18 */ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 b0000000 b0000000 0 10000000 @@ -306,7 +303,7 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = <b 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; @@ -321,8 +318,7 @@ * sense == 8: Level, low assertion * sense == 2: Edge, high-to-low change */ - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 303bd668deb..4fe45c02184 100644 --- a/arch/powerpc/boot/dts/mpc8360emds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -15,17 +15,15 @@ */ / { - model = "MPC8360EPB"; - compatible = "MPC83xx"; + model = "MPC8360MDS"; + compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #cpus = <1>; #address-cells = <1>; #size-cells = <0>; - linux,phandle = <200>; PowerPC,8360@0 { device_type = "cpu"; @@ -38,13 +36,11 @@ bus-frequency = <FBC5200>; clock-frequency = <1F78A400>; 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 10000000>; }; @@ -73,7 +69,7 @@ compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <e 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -82,7 +78,7 @@ compatible = "fsl-i2c"; reg = <3100 100>; interrupts = <f 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; dfsrr; }; @@ -92,7 +88,7 @@ reg = <4500 100>; clock-frequency = <FBC5200>; interrupts = <9 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; serial@4600 { @@ -101,7 +97,7 @@ reg = <4600 100>; clock-frequency = <FBC5200>; interrupts = <a 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; crypto@30000 { @@ -110,7 +106,7 @@ compatible = "talitos"; reg = <30000 10000>; interrupts = <b 8>; - interrupt-parent = <700>; + interrupt-parent = < &ipic >; num-channels = <4>; channel-fifo-len = <18>; exec-units-mask = <0000007e>; @@ -119,52 +115,51 @@ }; pci@8500 { - linux,phandle = <8500>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x11 AD17 */ - 8800 0 0 1 700 14 8 - 8800 0 0 2 700 15 8 - 8800 0 0 3 700 16 8 - 8800 0 0 4 700 17 8 + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 /* IDSEL 0x12 AD18 */ - 9000 0 0 1 700 16 8 - 9000 0 0 2 700 17 8 - 9000 0 0 3 700 14 8 - 9000 0 0 4 700 15 8 + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 /* IDSEL 0x13 AD19 */ - 9800 0 0 1 700 17 8 - 9800 0 0 2 700 14 8 - 9800 0 0 3 700 15 8 - 9800 0 0 4 700 16 8 + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 /* IDSEL 0x15 AD21*/ - a800 0 0 1 700 14 8 - a800 0 0 2 700 15 8 - a800 0 0 3 700 16 8 - a800 0 0 4 700 17 8 + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 /* IDSEL 0x16 AD22*/ - b000 0 0 1 700 17 8 - b000 0 0 2 700 14 8 - b000 0 0 3 700 15 8 - b000 0 0 4 700 16 8 + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 /* IDSEL 0x17 AD23*/ - b800 0 0 1 700 16 8 - b800 0 0 2 700 17 8 - b800 0 0 3 700 14 8 - b800 0 0 4 700 15 8 + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 /* IDSEL 0x18 AD24*/ - c000 0 0 1 700 15 8 - c000 0 0 2 700 16 8 - c000 0 0 3 700 17 8 - c000 0 0 4 700 14 8>; - interrupt-parent = <700>; + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; interrupts = <42 8>; bus-range = <0 0>; ranges = <02000000 0 a0000000 a0000000 0 10000000 @@ -179,8 +174,7 @@ device_type = "pci"; }; - pic@700 { - linux,phandle = <700>; + ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; @@ -194,8 +188,7 @@ device_type = "par_io"; num-ports = <7>; - ucc_pin@01 { - linux,phandle = <140001>; + pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ 0 3 1 0 1 0 /* TxD0 */ @@ -222,8 +215,7 @@ 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ 2 8 2 0 1 0>; /* GTX125 - CLK9 */ }; - ucc_pin@02 { - linux,phandle = <140002>; + pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ 0 11 1 0 1 0 /* TxD0 */ @@ -280,7 +272,7 @@ compatible = "fsl_spi"; reg = <4c0 40>; interrupts = <2>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "cpu"; }; @@ -289,7 +281,7 @@ compatible = "fsl_spi"; reg = <500 40>; interrupts = <1>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "cpu"; }; @@ -298,7 +290,7 @@ compatible = "qe_udc"; reg = <6c0 40 8B00 100>; interrupts = <b>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mode = "slave"; }; @@ -309,12 +301,12 @@ device-id = <1>; reg = <2000 200>; interrupts = <20>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mac-address = [ 00 04 9f 00 23 23 ]; rx-clock = <0>; tx-clock = <19>; - phy-handle = <212000>; - pio-handle = <140001>; + phy-handle = < &phy0 >; + pio-handle = < &pio1 >; }; ucc@3000 { @@ -324,12 +316,12 @@ device-id = <2>; reg = <3000 200>; interrupts = <21>; - interrupt-parent = <80>; + interrupt-parent = < &qeic >; mac-address = [ 00 11 22 33 44 55 ]; rx-clock = <0>; tx-clock = <14>; - phy-handle = <212001>; - pio-handle = <140002>; + phy-handle = < &phy1 >; + pio-handle = < &pio2 >; }; mdio@2120 { @@ -339,26 +331,23 @@ device_type = "mdio"; compatible = "ucc_geth_phy"; - ethernet-phy@00 { - linux,phandle = <212000>; - interrupt-parent = <700>; - interrupts = <11 2>; + phy0: ethernet-phy@00 { + interrupt-parent = < &ipic >; + interrupts = <11 8>; reg = <0>; device_type = "ethernet-phy"; interface = <6>; //ENET_1000_GMII }; - ethernet-phy@01 { - linux,phandle = <212001>; - interrupt-parent = <700>; - interrupts = <12 2>; + phy1: ethernet-phy@01 { + interrupt-parent = < &ipic >; + interrupts = <12 8>; reg = <1>; device_type = "ethernet-phy"; interface = <6>; }; }; - qeic@80 { - linux,phandle = <80>; + qeic: qeic@80 { interrupt-controller; device_type = "qeic"; #address-cells = <0>; @@ -367,7 +356,7 @@ built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 - interrupt-parent = <700>; + interrupt-parent = < &ipic >; }; }; diff --git a/arch/powerpc/configs/mpc832xemds_defconfig b/arch/powerpc/configs/mpc832x_mds_defconfig index e1b36de6b38..e1b36de6b38 100644 --- a/arch/powerpc/configs/mpc832xemds_defconfig +++ b/arch/powerpc/configs/mpc832x_mds_defconfig diff --git a/arch/powerpc/configs/mpc8360emds_defconfig b/arch/powerpc/configs/mpc836x_mds_defconfig index bbe38ccc3d8..8eb475cd0df 100644 --- a/arch/powerpc/configs/mpc8360emds_defconfig +++ b/arch/powerpc/configs/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Fri Jan 26 00:19:45 2007 +# Linux kernel version: 2.6.20 +# Sat Feb 17 10:09:26 2007 # # CONFIG_PPC64 is not set CONFIG_PPC32=y @@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_PPC_83xx=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set -# CONFIG_8xx is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_83xx=y @@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -129,10 +130,11 @@ CONFIG_PPC_GEN550=y # # Platform support # +# CONFIG_MPC8313_RDB is not set # CONFIG_MPC832x_MDS is not set -# CONFIG_MPC834x_SYS is not set +# CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set -CONFIG_MPC8360E_PB=y +CONFIG_MPC836x_MDS=y CONFIG_PPC_MPC836x=y # CONFIG_MPIC is not set @@ -162,6 +164,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -171,6 +174,7 @@ CONFIG_ISA_DMA_API=y # # Bus options # +CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -219,6 +223,7 @@ CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -528,6 +533,7 @@ CONFIG_UCC_GETH=y # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set @@ -620,6 +626,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -690,6 +697,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIS5595 is not set @@ -804,6 +812,7 @@ CONFIG_FIRMWARE_EDID=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set # # USB support @@ -868,6 +877,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # +# Auxiliary Display support +# + +# # Virtualization # @@ -1011,7 +1024,8 @@ CONFIG_BITREVERSE=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y # # Instrumentation Support @@ -1060,8 +1074,10 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1075,6 +1091,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index debac66e825..a8da0aea3b8 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -500,7 +500,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set @@ -646,7 +646,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_WINBOND=y # # Multi-device support (RAID and LVM) diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 1c794fe718f..6e96e50c362 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -483,7 +483,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set @@ -628,7 +628,7 @@ CONFIG_ATA=y # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_WINBOND=y # # Multi-device support (RAID and LVM) diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 12c51e4ad2b..ea6fd552c7e 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -5,6 +5,7 @@ #include <linux/pci_regs.h> #include <linux/module.h> #include <linux/ioport.h> +#include <linux/etherdevice.h> #include <asm/prom.h> #include <asm/pci-bridge.h> @@ -1003,3 +1004,42 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq return res; } EXPORT_SYMBOL_GPL(of_irq_map_one); + +/** + * Search the device tree for the best MAC address to use. 'mac-address' is + * checked first, because that is supposed to contain to "most recent" MAC + * address. If that isn't set, then 'local-mac-address' is checked next, + * because that is the default address. If that isn't set, then the obsolete + * 'address' is checked, just in case we're using an old device tree. + * + * Note that the 'address' property is supposed to contain a virtual address of + * the register set, but some DTS files have redefined that property to be the + * MAC address. + * + * All-zero MAC addresses are rejected, because those could be properties that + * exist in the device tree, but were not set by U-Boot. For example, the + * DTS could define 'mac-address' and 'local-mac-address', with zero MAC + * addresses. Some older U-Boots only initialized 'local-mac-address'. In + * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists + * but is all zeros. +*/ +const void *of_get_mac_address(struct device_node *np) +{ + struct property *pp; + + pp = of_find_property(np, "mac-address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + pp = of_find_property(np, "local-mac-address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + pp = of_find_property(np, "address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + return NULL; +} +EXPORT_SYMBOL(of_get_mac_address); + diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 1aea1e69ff3..713b31a16ce 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -38,12 +38,12 @@ config MPC834x_ITX Be aware that PCI initialization is the bootloader's responsibility. -config MPC8360E_PB - bool "Freescale MPC8360E PB" +config MPC836x_MDS + bool "Freescale MPC836x MDS" select DEFAULT_UIMAGE select QUICC_ENGINE help - This option enables support for the MPC836x EMDS Processor Board. + This option enables support for the MPC836x MDS Processor Board. endchoice @@ -69,6 +69,6 @@ config PPC_MPC836x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC8360E_PB + default y if MPC836x_MDS endmenu diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 6c8199c4c38..dfc970d0df1 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -6,5 +6,5 @@ obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o -obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o +obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c index c3b98c34eb6..32e9e949284 100644 --- a/arch/powerpc/platforms/83xx/mpc8313_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -74,16 +74,9 @@ void __init mpc8313_rdb_init_IRQ(void) */ static int __init mpc8313_rdb_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - if (model == NULL) - return 0; - if (strcmp(model, "MPC8313ERDB")) - return 0; + unsigned long root = of_get_flat_dt_root(); - DBG("MPC8313 RDB found\n"); - - return 1; + return of_flat_dt_is_compatible(root, "MPC8313ERDB"); } define_machine(mpc8313_rdb) { diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 3ecb55f8a6e..17e3a3c6d8b 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -57,11 +57,6 @@ unsigned long isa_mem_base = 0; static u8 *bcsr_regs = NULL; -u8 *get_bcsr(void) -{ - return bcsr_regs; -} - /* ************************************************************************ * * Setup the architecture @@ -74,17 +69,6 @@ static void __init mpc832x_sys_setup_arch(void) if (ppc_md.progress) ppc_md.progress("mpc832x_sys_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - unsigned int *fp = - (int *)get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); if (np != 0) { @@ -121,34 +105,23 @@ static void __init mpc832x_sys_setup_arch(void) iounmap(bcsr_regs); of_node_put(np); } - #endif /* CONFIG_QUICC_ENGINE */ - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } +static struct of_device_id mpc832x_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; + static int __init mpc832x_declare_of_platform_devices(void) { - struct device_node *np; - - for (np = NULL; (np = of_find_compatible_node(np, "network", - "ucc_geth")) != NULL;) { - int ucc_num; - char bus_id[BUS_ID_SIZE]; + if (!machine_is(mpc832x_mds)) + return 0; - ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1; - snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num); - of_platform_device_create(np, bus_id, NULL); - } + /* Publish the QE devices */ + of_platform_bus_probe(NULL, mpc832x_ids, NULL); return 0; } @@ -156,7 +129,6 @@ device_initcall(mpc832x_declare_of_platform_devices); static void __init mpc832x_sys_init_IRQ(void) { - struct device_node *np; np = of_find_node_by_type(NULL, "ipic"); @@ -189,6 +161,9 @@ static int __init mpc832x_rtc_hookup(void) { struct timespec tv; + if (!machine_is(mpc832x_mds)) + return 0; + ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; @@ -207,17 +182,9 @@ late_initcall(mpc832x_rtc_hookup); */ static int __init mpc832x_sys_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - - if (model == NULL) - return 0; - if (strcmp(model, "MPC8323EMDS")) - return 0; - - DBG("%s found\n", model); + unsigned long root = of_get_flat_dt_root(); - return 1; + return of_flat_dt_is_compatible(root, "MPC832xMDS"); } define_machine(mpc832x_mds) { diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 443a3172f37..3c009f6d4a4 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -55,28 +55,12 @@ static void __init mpc834x_itx_setup_arch(void) if (ppc_md.progress) ppc_md.progress("mpc834x_itx_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } static void __init mpc834x_itx_init_IRQ(void) @@ -100,10 +84,9 @@ static void __init mpc834x_itx_init_IRQ(void) */ static int __init mpc834x_itx_probe(void) { - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC834xMITX"); } define_machine(mpc834x_itx) { diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index d2736da76c4..e5d81916687 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -125,17 +125,6 @@ static void __init mpc834x_mds_setup_arch(void) if (ppc_md.progress) ppc_md.progress("mpc834x_mds_setup_arch()", 0); - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } - #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -144,12 +133,6 @@ static void __init mpc834x_mds_setup_arch(void) #endif mpc834x_usb_cfg(); - -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } static void __init mpc834x_mds_init_IRQ(void) @@ -176,6 +159,9 @@ static int __init mpc834x_rtc_hookup(void) { struct timespec tv; + if (!machine_is(mpc834x_mds)) + return 0; + ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; @@ -194,10 +180,9 @@ late_initcall(mpc834x_rtc_hookup); */ static int __init mpc834x_mds_probe(void) { - /* We always match for now, eventually we should look at the flat - dev tree to ensure this is the board we are suppose to run on - */ - return 1; + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC834xMDS"); } define_machine(mpc834x_mds) { diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index ccce2f9f283..526ed090a44 100644 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -5,12 +5,12 @@ * Yin Olivia <Hong-hua.Yin@freescale.com> * * Description: - * MPC8360E MDS PB board specific routines. + * MPC8360E MDS board specific routines. * * Changelog: * Jun 21, 2006 Initial version * - * This program is free software; you can redistribute it and/or modify it + * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. @@ -62,33 +62,17 @@ unsigned long isa_mem_base = 0; static u8 *bcsr_regs = NULL; -u8 *get_bcsr(void) -{ - return bcsr_regs; -} - /* ************************************************************************ * * Setup the architecture * */ -static void __init mpc8360_sys_setup_arch(void) +static void __init mpc836x_mds_setup_arch(void) { struct device_node *np; if (ppc_md.progress) - ppc_md.progress("mpc8360_sys_setup_arch()", 0); - - np = of_find_node_by_type(NULL, "cpu"); - if (np != 0) { - const unsigned int *fp = - get_property(np, "clock-frequency", NULL); - if (fp != 0) - loops_per_jiffy = *fp / HZ; - else - loops_per_jiffy = 50000000 / HZ; - of_node_put(np); - } + ppc_md.progress("mpc836x_mds_setup_arch()", 0); /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); @@ -128,40 +112,29 @@ static void __init mpc8360_sys_setup_arch(void) } #endif /* CONFIG_QUICC_ENGINE */ - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif } -static int __init mpc8360_declare_of_platform_devices(void) -{ - struct device_node *np; +static struct of_device_id mpc836x_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; - for (np = NULL; (np = of_find_compatible_node(np, "network", - "ucc_geth")) != NULL;) { - int ucc_num; - char bus_id[BUS_ID_SIZE]; +static int __init mpc836x_declare_of_platform_devices(void) +{ + if (!machine_is(mpc836x_mds)) + return 0; - ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1; - snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num); - of_platform_device_create(np, bus_id, NULL); - } + /* Publish the QE devices */ + of_platform_bus_probe(NULL, mpc836x_ids, NULL); return 0; } -device_initcall(mpc8360_declare_of_platform_devices); +device_initcall(mpc836x_declare_of_platform_devices); -static void __init mpc8360_sys_init_IRQ(void) +static void __init mpc836x_mds_init_IRQ(void) { - struct device_node *np; np = of_find_node_by_type(NULL, "ipic"); @@ -194,6 +167,9 @@ static int __init mpc8360_rtc_hookup(void) { struct timespec tv; + if (!machine_is(mpc836x_mds)) + return 0; + ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; @@ -210,28 +186,21 @@ late_initcall(mpc8360_rtc_hookup); /* * Called very early, MMU is off, device-tree isn't unflattened */ -static int __init mpc8360_sys_probe(void) +static int __init mpc836x_mds_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); - if (model == NULL) - return 0; - if (strcmp(model, "MPC8360EPB")) - return 0; - - DBG("MPC8360EMDS-PB found\n"); + unsigned long root = of_get_flat_dt_root(); - return 1; + return of_flat_dt_is_compatible(root, "MPC836xMDS"); } -define_machine(mpc8360_sys) { - .name = "MPC8360E PB", - .probe = mpc8360_sys_probe, - .setup_arch = mpc8360_sys_setup_arch, - .init_IRQ = mpc8360_sys_init_IRQ, - .get_irq = ipic_get_irq, - .restart = mpc83xx_restart, - .time_init = mpc83xx_time_init, +define_machine(mpc836x_mds) { + .name = "MPC836x MDS", + .probe = mpc836x_mds_probe, + .setup_arch = mpc836x_mds_setup_arch, + .init_IRQ = mpc836x_mds_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, .calibrate_decr = generic_calibrate_decr, - .progress = udbg_progress, + .progress = udbg_progress, }; diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index dc0583bdbc6..2dfd05095a2 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -4,7 +4,7 @@ endif obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o ras.o rtasd.o pci_dlpar.o \ - firmware.o + firmware.o power.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c new file mode 100644 index 00000000000..2624b71df73 --- /dev/null +++ b/arch/powerpc/platforms/pseries/power.c @@ -0,0 +1,87 @@ +/* + * Interface for power-management for ppc64 compliant platform + * + * Manish Ahuja <mahuja@us.ibm.com> + * + * Feb 2007 + * + * Copyright (C) 2007 IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kobject.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/init.h> + +unsigned long rtas_poweron_auto; /* default and normal state is 0 */ + +static ssize_t auto_poweron_show(struct subsystem *subsys, char *buf) +{ + return sprintf(buf, "%lu\n", rtas_poweron_auto); +} + +static ssize_t +auto_poweron_store(struct subsystem *subsys, const char *buf, size_t n) +{ + int ret; + unsigned long ups_restart; + ret = sscanf(buf, "%lu", &ups_restart); + + if ((ret == 1) && ((ups_restart == 1) || (ups_restart == 0))){ + rtas_poweron_auto = ups_restart; + return n; + } + return -EINVAL; +} + +static struct subsys_attribute auto_poweron_attr = { + .attr = { + .name = __stringify(auto_poweron), + .mode = 0644, + }, + .show = auto_poweron_show, + .store = auto_poweron_store, +}; + +#ifndef CONFIG_PM +decl_subsys(power,NULL,NULL); + +static struct attribute *g[] = { + &auto_poweron_attr.attr, + NULL, +}; + +static struct attribute_group attr_group = { + .attrs = g, +}; + +static int __init pm_init(void) +{ + int error = subsystem_register(&power_subsys); + if (!error) + error = sysfs_create_group(&power_subsys.kset.kobj,&attr_group); + return error; +} +core_initcall(pm_init); +#else +extern struct subsystem power_subsys; + +static int __init apo_pm_init(void) +{ + return (subsys_create_file(&power_subsys, &auto_poweron_attr)); +} +__initcall(apo_pm_init); +#endif diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 35264f9af0f..22bc0198974 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -33,4 +33,7 @@ static inline void setup_kexec_cpu_down_xics(void) { } static inline void setup_kexec_cpu_down_mpic(void) { } #endif +/* Poweron flag used for enabling auto ups restart */ +extern unsigned long rtas_poweron_auto; + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 435a0459652..34aff47b1f5 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -486,6 +486,34 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; } +/** + * pSeries_power_off - tell firmware about how to power off the system. + * + * This function calls either the power-off rtas token in normal cases + * or the ibm,power-off-ups token (if present & requested) in case of + * a power failure. If power-off token is used, power on will only be + * possible with power button press. If ibm,power-off-ups token is used + * it will allow auto poweron after power is restored. + */ +void pSeries_power_off(void) +{ + int rc; + int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups"); + + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_POWER_OFF); + + if (rtas_poweron_auto == 0 || + rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) { + rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1); + printk(KERN_INFO "RTAS power-off returned %d\n", rc); + } else { + rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL); + printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc); + } + for (;;); +} + define_machine(pseries) { .name = "pSeries", .probe = pSeries_probe, @@ -496,7 +524,7 @@ define_machine(pseries) { .pcibios_fixup = pSeries_final_fixup, .pci_probe_mode = pSeries_pci_probe_mode, .restart = rtas_restart, - .power_off = rtas_power_off, + .power_off = pSeries_power_off, .halt = rtas_halt, .panic = rtas_os_term, .get_boot_time = rtas_get_boot_time, diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 34161bc5a02..d20f02927f7 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -233,14 +233,7 @@ static int __init gfar_of_init(void) goto err; } - mac_addr = get_property(np, "local-mac-address", NULL); - if (mac_addr == NULL) - mac_addr = get_property(np, "mac-address", NULL); - if (mac_addr == NULL) { - /* Obsolete */ - mac_addr = get_property(np, "address", NULL); - } - + mac_addr = of_get_mac_address(np); if (mac_addr) memcpy(gfar_data.mac_addr, mac_addr, 6); @@ -646,8 +639,9 @@ static int __init fs_enet_of_init(void) goto unreg; } - mac_addr = get_property(np, "mac-address", NULL); - memcpy(fs_enet_data.macaddr, mac_addr, 6); + mac_addr = of_get_mac_address(np); + if (mac_addr) + memcpy(fs_enet_data.macaddr, mac_addr, 6); ph = get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); @@ -931,8 +925,9 @@ static int __init fs_enet_of_init(void) goto err; r[0].name = enet_regs; - mac_addr = (void *)get_property(np, "mac-address", NULL); - memcpy(fs_enet_data.macaddr, mac_addr, 6); + mac_addr = of_get_mac_address(np); + if (mac_addr) + memcpy(fs_enet_data.macaddr, mac_addr, 6); ph = (phandle *) get_property(np, "phy-handle", NULL); if (ph != NULL) diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index e657559bea9..a457ac1c663 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -1,13 +1,12 @@ /* - * arch/powerpc/sysdev/qe_lib/ucc_fast.c - * - * QE UCC Fast API Set - UCC Fast specific routines implementations. - * * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. * * Authors: Shlomi Gridish <gridish@freescale.com> * Li Yang <leoli@freescale.com> * + * Description: + * QE UCC Fast API Set - UCC Fast specific routines implementations. + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your @@ -27,79 +26,61 @@ #include <asm/ucc.h> #include <asm/ucc_fast.h> -#define uccf_printk(level, format, arg...) \ - printk(level format "\n", ## arg) - -#define uccf_dbg(format, arg...) \ - uccf_printk(KERN_DEBUG , format , ## arg) -#define uccf_err(format, arg...) \ - uccf_printk(KERN_ERR , format , ## arg) -#define uccf_info(format, arg...) \ - uccf_printk(KERN_INFO , format , ## arg) -#define uccf_warn(format, arg...) \ - uccf_printk(KERN_WARNING , format , ## arg) - -#ifdef UCCF_VERBOSE_DEBUG -#define uccf_vdbg uccf_dbg -#else -#define uccf_vdbg(fmt, args...) do { } while (0) -#endif /* UCCF_VERBOSE_DEBUG */ - void ucc_fast_dump_regs(struct ucc_fast_private * uccf) { - uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num); - uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs); + printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num); + printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs); - uccf_info("gumr : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "gumr : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); - uccf_info("upsmr : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); - uccf_info("utodr : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); - uccf_info("udsr : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "udsr : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); - uccf_info("ucce : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "ucce : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); - uccf_info("uccm : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "uccm : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); - uccf_info("uccs : addr - 0x%08x, val - 0x%02x", + printk(KERN_INFO "uccs : addr - 0x%08x, val - 0x%02x", (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs); - uccf_info("urfb : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "urfb : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); - uccf_info("urfs : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "urfs : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); - uccf_info("urfet : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); - uccf_info("urfset: addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset)); - uccf_info("utfb : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "utfb : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); - uccf_info("utfs : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utfs : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); - uccf_info("utfet : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); - uccf_info("utftt : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); - uccf_info("utpt : addr - 0x%08x, val - 0x%04x", + printk(KERN_INFO "utpt : addr - 0x%08x, val - 0x%04x", (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); - uccf_info("urtry : addr - 0x%08x, val - 0x%08x", + printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x", (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); - uccf_info("guemr : addr - 0x%08x, val - 0x%02x", + printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x", (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr); } u32 ucc_fast_get_qe_cr_subblock(int uccf_num) { switch (uccf_num) { - case 0: return QE_CR_SUBBLOCK_UCCFAST1; + case 0: return QE_CR_SUBBLOCK_UCCFAST1; case 1: return QE_CR_SUBBLOCK_UCCFAST2; case 2: return QE_CR_SUBBLOCK_UCCFAST3; case 3: return QE_CR_SUBBLOCK_UCCFAST4; case 4: return QE_CR_SUBBLOCK_UCCFAST5; case 5: return QE_CR_SUBBLOCK_UCCFAST6; case 6: return QE_CR_SUBBLOCK_UCCFAST7; - case 7: return QE_CR_SUBBLOCK_UCCFAST8; + case 7: return QE_CR_SUBBLOCK_UCCFAST8; default: return QE_CR_SUBBLOCK_INVALID; } } @@ -153,84 +134,72 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc { struct ucc_fast_private *uccf; struct ucc_fast *uf_regs; - u32 gumr = 0; + u32 gumr; int ret; - uccf_vdbg("%s: IN", __FUNCTION__); - if (!uf_info) return -EINVAL; /* check if the UCC port number is in range. */ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { - uccf_err("ucc_fast_init: Illegal UCC number!"); + printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__); return -EINVAL; } /* Check that 'max_rx_buf_length' is properly aligned (4). */ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { - uccf_err("ucc_fast_init: max_rx_buf_length not aligned."); + printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__); return -EINVAL; } /* Validate Virtual Fifo register values */ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { - uccf_err - ("ucc_fast_init: Virtual Fifo register urfs too small."); + printk(KERN_ERR "%s: urfs is too small", __FUNCTION__); return -EINVAL; } if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register urfs not aligned."); + printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__); return -EINVAL; } if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register urfet not aligned."); + printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__); return -EINVAL; } if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register urfset not aligned."); + printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__); return -EINVAL; } if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register utfs not aligned."); + printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__); return -EINVAL; } if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register utfet not aligned."); + printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__); return -EINVAL; } if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - uccf_err - ("ucc_fast_init: Virtual Fifo register utftt not aligned."); + printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__); return -EINVAL; } uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); if (!uccf) { - uccf_err - ("ucc_fast_init: No memory for UCC slow data structure!"); + printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__); return -ENOMEM; } /* Fill fast UCC structure */ uccf->uf_info = uf_info; /* Set the PHY base address */ - uccf->uf_regs = - (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast)); + uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); if (uccf->uf_regs == NULL) { - uccf_err - ("ucc_fast_init: No memory map for UCC slow controller!"); + printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__); return -ENOMEM; } @@ -249,7 +218,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Init Guemr register */ if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) { - uccf_err("ucc_fast_init: Could not init the guemr register."); + printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__); ucc_fast_free(uccf); return ret; } @@ -258,7 +227,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc if ((ret = ucc_set_type(uf_info->ucc_num, (struct ucc_common *) (uf_regs), UCC_SPEED_TYPE_FAST))) { - uccf_err("ucc_fast_init: Could not set type to fast."); + printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); ucc_fast_free(uccf); return ret; } @@ -267,10 +236,9 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Set GUMR */ /* For more details see the hardware spec. */ - /* gumr starts as zero. */ + gumr = uf_info->ttx_trx; if (uf_info->tci) gumr |= UCC_FAST_GUMR_TCI; - gumr |= uf_info->ttx_trx; if (uf_info->cdp) gumr |= UCC_FAST_GUMR_CDP; if (uf_info->ctsp) @@ -298,9 +266,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc uccf->ucc_fast_tx_virtual_fifo_base_offset = qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { - uccf_err - ("ucc_fast_init: Can not allocate MURAM memory for " - "struct ucc_fastx_virtual_fifo_base_offset."); + printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__); uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -308,14 +274,11 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Allocate memory for Rx Virtual Fifo */ uccf->ucc_fast_rx_virtual_fifo_base_offset = - qe_muram_alloc(uf_info->urfs + - (u32) + qe_muram_alloc(uf_info->urfs + UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { - uccf_err - ("ucc_fast_init: Can not allocate MURAM memory for " - "ucc_fast_rx_virtual_fifo_base_offset."); + printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__); uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -342,26 +305,22 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* If NMSI (not Tsa), set Tx and Rx clock. */ if (!uf_info->tsa) { /* Rx clock routing */ - if (uf_info->rx_clock != QE_CLK_NONE) { - if (ucc_set_qe_mux_rxtx - (uf_info->ucc_num, uf_info->rx_clock, - COMM_DIR_RX)) { - uccf_err - ("ucc_fast_init: Illegal value for parameter 'RxClock'."); - ucc_fast_free(uccf); - return -EINVAL; - } + if ((uf_info->rx_clock != QE_CLK_NONE) && + ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock, + COMM_DIR_RX)) { + printk(KERN_ERR "%s: illegal value for RX clock", + __FUNCTION__); + ucc_fast_free(uccf); + return -EINVAL; } /* Tx clock routing */ - if (uf_info->tx_clock != QE_CLK_NONE) { - if (ucc_set_qe_mux_rxtx - (uf_info->ucc_num, uf_info->tx_clock, - COMM_DIR_TX)) { - uccf_err - ("ucc_fast_init: Illegal value for parameter 'TxClock'."); - ucc_fast_free(uccf); - return -EINVAL; - } + if ((uf_info->tx_clock != QE_CLK_NONE) && + ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock, + COMM_DIR_TX)) { + printk(KERN_ERR "%s: illegal value for TX clock", + __FUNCTION__); + ucc_fast_free(uccf); + return -EINVAL; } } @@ -370,9 +329,9 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* First, clear anything pending at UCC level, * otherwise, old garbage may come through - * as soon as the dam is opened - * Writing '1' clears - */ + * as soon as the dam is opened. */ + + /* Writing '1' clears */ out_be32(&uf_regs->ucce, 0xffffffff); *uccf_ret = uccf; diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 0e97e5c94f8..817df73ecf5 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -19,7 +19,6 @@ #include <linux/stddef.h> #include <linux/interrupt.h> -#include <asm/irq.h> #include <asm/io.h> #include <asm/immap_qe.h> #include <asm/qe.h> @@ -27,24 +26,6 @@ #include <asm/ucc.h> #include <asm/ucc_slow.h> -#define uccs_printk(level, format, arg...) \ - printk(level format "\n", ## arg) - -#define uccs_dbg(format, arg...) \ - uccs_printk(KERN_DEBUG , format , ## arg) -#define uccs_err(format, arg...) \ - uccs_printk(KERN_ERR , format , ## arg) -#define uccs_info(format, arg...) \ - uccs_printk(KERN_INFO , format , ## arg) -#define uccs_warn(format, arg...) \ - uccs_printk(KERN_WARNING , format , ## arg) - -#ifdef UCCS_VERBOSE_DEBUG -#define uccs_vdbg uccs_dbg -#else -#define uccs_vdbg(fmt, args...) do { } while (0) -#endif /* UCCS_VERBOSE_DEBUG */ - u32 ucc_slow_get_qe_cr_subblock(int uccs_num) { switch (uccs_num) { @@ -135,51 +116,53 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret) { + struct ucc_slow_private *uccs; u32 i; struct ucc_slow *us_regs; u32 gumr; - u8 function_code = 0; - u8 *bd; - struct ucc_slow_private *uccs; + struct qe_bd *bd; u32 id; u32 command; - int ret; - - uccs_vdbg("%s: IN", __FUNCTION__); + int ret = 0; if (!us_info) return -EINVAL; /* check if the UCC port number is in range. */ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { - uccs_err("ucc_slow_init: Illegal UCC number!"); + printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__); return -EINVAL; } /* * Set mrblr * Check that 'max_rx_buf_length' is properly aligned (4), unless - * rfw is 1, meaning that QE accepts one byte at a time, unlike normal + * rfw is 1, meaning that QE accepts one byte at a time, unlike normal * case when QE accepts 32 bits at a time. */ if ((!us_info->rfw) && (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) { - uccs_err("max_rx_buf_length not aligned."); + printk(KERN_ERR "max_rx_buf_length not aligned."); return -EINVAL; } uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); if (!uccs) { - uccs_err - ("ucc_slow_init: No memory for UCC slow data structure!"); + printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__); return -ENOMEM; } /* Fill slow UCC structure */ uccs->us_info = us_info; + /* Set the PHY base address */ + uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow)); + if (uccs->us_regs == NULL) { + printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__); + return -ENOMEM; + } + uccs->saved_uccm = 0; uccs->p_rx_frame = 0; - uccs->us_regs = us_info->regs; us_regs = uccs->us_regs; uccs->p_ucce = (u16 *) & (us_regs->ucce); uccs->p_uccm = (u16 *) & (us_regs->uccm); @@ -190,24 +173,22 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc #endif /* STATISTICS */ /* Get PRAM base */ - uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE, - ALIGNMENT_OF_UCC_SLOW_PRAM); + uccs->us_pram_offset = + qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM); if (IS_MURAM_ERR(uccs->us_pram_offset)) { - uccs_err - ("ucc_slow_init: Can not allocate MURAM memory " - "for Slow UCC."); + printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__); ucc_slow_free(uccs); return -ENOMEM; } id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED, - (u32) uccs->us_pram_offset); + uccs->us_pram_offset); uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); /* Init Guemr register */ if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) { - uccs_err("ucc_slow_init: Could not init the guemr register."); + printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__); ucc_slow_free(uccs); return ret; } @@ -216,7 +197,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc if ((ret = ucc_set_type(us_info->ucc_num, (struct ucc_common *) (us_info->regs), UCC_SPEED_TYPE_SLOW))) { - uccs_err("ucc_slow_init: Could not init the guemr register."); + printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); ucc_slow_free(uccs); return ret; } @@ -230,7 +211,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_MURAM_ERR(uccs->rx_base_offset)) { - uccs_err("ucc_slow_init: No memory for Rx BD's."); + printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__); uccs->rx_base_offset = 0; ucc_slow_free(uccs); return -ENOMEM; @@ -240,7 +221,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_MURAM_ERR(uccs->tx_base_offset)) { - uccs_err("ucc_slow_init: No memory for Tx BD's."); + printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__); uccs->tx_base_offset = 0; ucc_slow_free(uccs); return -ENOMEM; @@ -248,34 +229,33 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Init Tx bds */ bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset); - for (i = 0; i < us_info->tx_bd_ring_len; i++) { + for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) { /* clear bd buffer */ - out_be32(&(((struct qe_bd *)bd)->buf), 0); + out_be32(&bd->buf, 0); /* set bd status and length */ - out_be32((u32*)bd, 0); - bd += sizeof(struct qe_bd); + out_be32((u32 *) bd, 0); + bd++; } - bd -= sizeof(struct qe_bd); - /* set bd status and length */ - out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */ + /* for last BD set Wrap bit */ + out_be32(&bd->buf, 0); + out_be32((u32 *) bd, cpu_to_be32(T_W)); /* Init Rx bds */ bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset); - for (i = 0; i < us_info->rx_bd_ring_len; i++) { + for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) { /* set bd status and length */ out_be32((u32*)bd, 0); /* clear bd buffer */ - out_be32(&(((struct qe_bd *)bd)->buf), 0); - bd += sizeof(struct qe_bd); + out_be32(&bd->buf, 0); + bd++; } - bd -= sizeof(struct qe_bd); - /* set bd status and length */ - out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */ + /* for last BD set Wrap bit */ + out_be32((u32*)bd, cpu_to_be32(R_W)); + out_be32(&bd->buf, 0); /* Set GUMR (For more details see the hardware spec.). */ /* gumr_h */ - gumr = 0; - gumr |= us_info->tcrc; + gumr = us_info->tcrc; if (us_info->cdp) gumr |= UCC_SLOW_GUMR_H_CDP; if (us_info->ctsp) @@ -295,7 +275,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc out_be32(&us_regs->gumr_h, gumr); /* gumr_l */ - gumr = 0; + gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc | + us_info->diag | us_info->mode; if (us_info->tci) gumr |= UCC_SLOW_GUMR_L_TCI; if (us_info->rinv) @@ -304,23 +285,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc gumr |= UCC_SLOW_GUMR_L_TINV; if (us_info->tend) gumr |= UCC_SLOW_GUMR_L_TEND; - gumr |= us_info->tdcr; - gumr |= us_info->rdcr; - gumr |= us_info->tenc; - gumr |= us_info->renc; - gumr |= us_info->diag; - gumr |= us_info->mode; out_be32(&us_regs->gumr_l, gumr); /* Function code registers */ - /* function_code has initial value 0 */ /* if the data is in cachable memory, the 'global' */ /* in the function code should be set. */ - function_code |= us_info->data_mem_part; - function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */ - uccs->us_pram->tfcr = function_code; - uccs->us_pram->rfcr = function_code; + uccs->us_pram->tfcr = uccs->us_pram->rfcr = + us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT; /* rbase, tbase are offsets from MURAM base */ out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset); @@ -336,34 +308,29 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* If NMSI (not Tsa), set Tx and Rx clock. */ if (!us_info->tsa) { /* Rx clock routing */ - if (ucc_set_qe_mux_rxtx - (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) { - uccs_err - ("ucc_slow_init: Illegal value for parameter" - " 'RxClock'."); + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock, + COMM_DIR_RX)) { + printk(KERN_ERR "%s: illegal value for RX clock", + __FUNCTION__); ucc_slow_free(uccs); return -EINVAL; } /* Tx clock routing */ - if (ucc_set_qe_mux_rxtx(us_info->ucc_num, - us_info->tx_clock, COMM_DIR_TX)) { - uccs_err - ("ucc_slow_init: Illegal value for parameter " - "'TxClock'."); + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock, + COMM_DIR_TX)) { + printk(KERN_ERR "%s: illegal value for TX clock", + __FUNCTION__); ucc_slow_free(uccs); return -EINVAL; } } - /* - * INTERRUPTS - */ /* Set interrupt mask register at UCC level. */ out_be16(&us_regs->uccm, us_info->uccm_mask); - /* First, clear anything pending at UCC level, */ - /* otherwise, old garbage may come through */ - /* as soon as the dam is opened. */ + /* First, clear anything pending at UCC level, + * otherwise, old garbage may come through + * as soon as the dam is opened. */ /* Writing '1' clears */ out_be16(&us_regs->ucce, 0xffff); @@ -400,3 +367,5 @@ void ucc_slow_free(struct ucc_slow_private * uccs) kfree(uccs); } + + |