diff options
Diffstat (limited to 'arch/powerpc')
312 files changed, 8319 insertions, 3369 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 805420853ac..957bf344c0f 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -86,6 +86,7 @@ config PPC bool default y select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO select BINFMT_ELF select OF select OF_EARLY_FLATTREE @@ -139,6 +140,7 @@ config PPC select OLD_SIGACTION if PPC32 select HAVE_DEBUG_STACKOVERFLOW select HAVE_IRQ_EXIT_ON_IRQ_STACK + select ARCH_USE_CMPXCHG_LOCKREF if PPC64 config GENERIC_CSUM def_bool CPU_LITTLE_ENDIAN @@ -213,9 +215,6 @@ config DEFAULT_UIMAGE Used to allow a board to specify it wants a uImage built by default default n -config REDBOOT - bool - config ARCH_HIBERNATION_POSSIBLE bool default y @@ -385,6 +384,12 @@ config ARCH_HAS_WALK_MEMORY config ARCH_ENABLE_MEMORY_HOTREMOVE def_bool y +config PPC64_SUPPORTS_MEMORY_FAILURE + bool "Add support for memory hwpoison" + depends on PPC_BOOK3S_64 + default "y" if PPC_POWERNV + select ARCH_SUPPORTS_MEMORY_FAILURE + config KEXEC bool "kexec system call" depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP)) @@ -405,8 +410,7 @@ config KEXEC config CRASH_DUMP bool "Build a kdump crash kernel" depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP) - select RELOCATABLE if PPC64 || 44x - select DYNAMIC_MEMSTART if FSL_BOOKE + select RELOCATABLE if PPC64 || 44x || FSL_BOOKE help Build a kernel suitable for use as a kdump capture kernel. The same kernel binary can be used as production kernel and dump @@ -530,6 +534,7 @@ config PPC_16K_PAGES config PPC_64K_PAGES bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64 + depends on !PPC_FSL_BOOK3E select PPC_HAS_HASH_64K if PPC_STD_MMU_64 config PPC_256K_PAGES @@ -796,7 +801,7 @@ config HAS_RAPIDIO default n config RAPIDIO - bool "RapidIO support" + tristate "RapidIO support" depends on HAS_RAPIDIO || PCI help If you say Y here, the kernel will include drivers and @@ -804,7 +809,7 @@ config RAPIDIO config FSL_RIO bool "Freescale Embedded SRIO Controller support" - depends on RAPIDIO && HAS_RAPIDIO + depends on RAPIDIO = y && HAS_RAPIDIO default "n" ---help--- Include support for RapidIO controller on Freescale embedded @@ -887,7 +892,7 @@ config DYNAMIC_MEMSTART config RELOCATABLE bool "Build a relocatable kernel" - depends on ADVANCED_OPTIONS && FLATMEM && 44x + depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE) select NONSTATIC_KERNEL help This builds a kernel image that is capable of running at the @@ -1043,11 +1048,6 @@ config KEYS_COMPAT source "crypto/Kconfig" -config PPC_CLOCK - bool - default n - select HAVE_CLK - config PPC_LIB_RHEAP bool diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index 554734ff302..d61c0352577 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -16,6 +16,7 @@ mktree uImage cuImage.* dtbImage.* +*.dtb treeImage.* zImage zImage.initrd diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index ca7f08cc4af..90e9d954866 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -71,9 +71,9 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \ uartlite.c mpc52xx-psc.c src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c -src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c +src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c -src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c +src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c src-plat-y := of.c epapr.c src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \ @@ -95,7 +95,7 @@ src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ cuboot-c2k.c gamecube-head.S \ gamecube.c wii-head.S wii.c holly.c \ - prpmc2800.c + prpmc2800.c fixed-head.S mvme5100.c src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c @@ -286,6 +286,7 @@ image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_PPC_C2K) += cuImage.c2k image-$(CONFIG_GAMECUBE) += dtbImage.gamecube image-$(CONFIG_WII) += dtbImage.wii +image-$(CONFIG_MVME5100) += dtbImage.mvme5100 # Board port in arch/powerpc/platform/amigaone/Kconfig image-$(CONFIG_AMIGAONE) += cuImage.amigaone diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts index a543c4088cb..a1b883730b3 100644 --- a/arch/powerpc/boot/dts/ac14xx.dts +++ b/arch/powerpc/boot/dts/ac14xx.dts @@ -139,7 +139,14 @@ }; }; + clocks { + osc { + clock-frequency = <25000000>; + }; + }; + soc@80000000 { + bus-frequency = <80000000>; /* 80 MHz ips bus */ clock@f00 { compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock"; diff --git a/arch/powerpc/boot/dts/adder875-redboot.dts b/arch/powerpc/boot/dts/adder875-redboot.dts index 28e9cd3d7a2..083984720b2 100644 --- a/arch/powerpc/boot/dts/adder875-redboot.dts +++ b/arch/powerpc/boot/dts/adder875-redboot.dts @@ -87,12 +87,10 @@ PHY0: ethernet-phy@0 { reg = <0>; - device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { reg = <1>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/adder875-uboot.dts b/arch/powerpc/boot/dts/adder875-uboot.dts index 54fb60ec03e..e4554caf8f8 100644 --- a/arch/powerpc/boot/dts/adder875-uboot.dts +++ b/arch/powerpc/boot/dts/adder875-uboot.dts @@ -86,12 +86,10 @@ PHY0: ethernet-phy@0 { reg = <0>; - device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { reg = <1>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts index 227290db866..9198745f45f 100644 --- a/arch/powerpc/boot/dts/asp834x-redboot.dts +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -207,14 +207,12 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x1>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts index f5d625fa3e5..1e32903cb0a 100644 --- a/arch/powerpc/boot/dts/c2k.dts +++ b/arch/powerpc/boot/dts/c2k.dts @@ -73,19 +73,16 @@ compatible = "marvell,mv64360-mdio"; reg = <0x2000 4>; PHY0: ethernet-phy@0 { - device_type = "ethernet-phy"; interrupts = <76>; /* GPP 12 */ interrupt-parent = <&PIC>; reg = <0>; }; PHY1: ethernet-phy@1 { - device_type = "ethernet-phy"; interrupts = <76>; /* GPP 12 */ interrupt-parent = <&PIC>; reg = <1>; }; PHY2: ethernet-phy@2 { - device_type = "ethernet-phy"; interrupts = <76>; /* GPP 12 */ interrupt-parent = <&PIC>; reg = <2>; @@ -174,7 +171,6 @@ }; MPSC0: mpsc@8000 { - device_type = "serial"; compatible = "marvell,mv64360-mpsc"; reg = <0x8000 0x38>; virtual-reg = <0xd8008000>; @@ -189,7 +185,6 @@ }; MPSC1: mpsc@9000 { - device_type = "serial"; compatible = "marvell,mv64360-mpsc"; reg = <0x9000 0x38>; virtual-reg = <0xd8009000>; diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts index 756758fb5b7..8b3a49f34f5 100644 --- a/arch/powerpc/boot/dts/ep8248e.dts +++ b/arch/powerpc/boot/dts/ep8248e.dts @@ -67,7 +67,6 @@ ranges; mdio { - device_type = "mdio"; compatible = "fsl,ep8248e-mdio-bitbang"; #address-cells = <1>; #size-cells = <0>; @@ -76,13 +75,11 @@ PHY0: ethernet-phy@0 { interrupt-parent = <&PIC>; reg = <0>; - device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; reg = <1>; - device_type = "ethernet-phy"; }; }; }; diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts index ae57d624012..2aa5bf55964 100644 --- a/arch/powerpc/boot/dts/ep88xc.dts +++ b/arch/powerpc/boot/dts/ep88xc.dts @@ -85,12 +85,10 @@ PHY0: ethernet-phy@0 { reg = <0x0>; - device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { reg = <0x1>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi new file mode 100644 index 00000000000..d3cc8d0f7c2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi @@ -0,0 +1,82 @@ +/* + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma2: dma@102300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x102300 0x4>, + <0x102600 0x4>; + ranges = <0x0 0x102100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <464 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <465 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <466 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <467 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <468 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <469 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <470 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <471 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi index 68cc5e7f647..642dc3a83d0 100644 --- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -36,7 +36,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0x9000 */ diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi index adb82fd9057..407cb5fd0f5 100644 --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -36,7 +36,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0x9000 */ diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index e179803a81e..ebf20223454 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -40,7 +40,8 @@ * pin muxing when the DIU is enabled. */ compatible = "fsl,p1022-elbc", "fsl,elbc"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0x9000 */ diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi index f1105bffa91..81437fdf1db 100644 --- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -36,7 +36,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0xa000 */ diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index 38dcb96c8e2..83eb0fda266 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -292,13 +292,11 @@ interrupt-parent = <&gef_pic>; interrupts = <0x9 0x4>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&gef_pic>; interrupts = <0x8 0x4>; reg = <3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 5ab8932d09b..d426dd3de9e 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -290,13 +290,11 @@ interrupt-parent = <&gef_pic>; interrupts = <0x9 0x4>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&gef_pic>; interrupts = <0x8 0x4>; reg = <3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index d5341f5741a..5db3399b76b 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -290,13 +290,11 @@ interrupt-parent = <&gef_pic>; interrupts = <0x9 0x4>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&gef_pic>; interrupts = <0x8 0x4>; reg = <3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index c6e11ebeceb..43e6f0c8e44 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -58,7 +58,6 @@ }; MDIO: mdio@6000 { - device_type = "mdio"; compatible = "tsi109-mdio", "tsi108-mdio"; reg = <0x00006000 0x00000050>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 1613d6e4049..5ba7f01e2a2 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -406,7 +406,7 @@ MSI: ppc4xx-msi@C10000000 { compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; - reg = < 0x0 0xEF620000 0x100>; + reg = <0xEF620000 0x100>; sdr-base = <0x4B0>; msi-data = <0x00000000>; msi-mask = <0x44440000>; diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts index 296c572ea60..5d68236e7c3 100644 --- a/arch/powerpc/boot/dts/ksi8560.dts +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -161,13 +161,11 @@ PHY1: ethernet-phy@1 { interrupt-parent = <&mpic>; reg = <0x1>; - device_type = "ethernet-phy"; }; PHY2: ethernet-phy@2 { interrupt-parent = <&mpic>; reg = <0x2>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { @@ -284,7 +282,6 @@ PHY0: ethernet-phy@0 { interrupt-parent = <&mpic>; reg = <0x0>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi index 2d7cb04ac96..2c0e1552d20 100644 --- a/arch/powerpc/boot/dts/mpc5121.dtsi +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -9,6 +9,8 @@ * option) any later version. */ +#include <dt-bindings/clock/mpc512x-clock.h> + /dts-v1/; / { @@ -49,6 +51,10 @@ compatible = "fsl,mpc5121-mbx"; reg = <0x20000000 0x4000>; interrupts = <66 0x8>; + clocks = <&clks MPC512x_CLK_MBX_BUS>, + <&clks MPC512x_CLK_MBX_3D>, + <&clks MPC512x_CLK_MBX>; + clock-names = "mbx-bus", "mbx-3d", "mbx"; }; sram@30000000 { @@ -62,6 +68,8 @@ interrupts = <6 8>; #address-cells = <1>; #size-cells = <1>; + clocks = <&clks MPC512x_CLK_NFC>; + clock-names = "ipg"; }; localbus@80000020 { @@ -73,6 +81,17 @@ ranges = <0x0 0x0 0xfc000000 0x04000000>; }; + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + }; + soc@80000000 { compatible = "fsl,mpc5121-immr"; #address-cells = <1>; @@ -117,9 +136,12 @@ }; /* Clock control */ - clock@f00 { + clks: clock@f00 { compatible = "fsl,mpc5121-clock"; reg = <0xf00 0x100>; + #clock-cells = <1>; + clocks = <&osc>; + clock-names = "osc"; }; /* Power Management Controller */ @@ -139,12 +161,24 @@ compatible = "fsl,mpc5121-mscan"; reg = <0x1300 0x80>; interrupts = <12 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN0_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; }; can@1380 { compatible = "fsl,mpc5121-mscan"; reg = <0x1380 0x80>; interrupts = <13 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN1_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; }; sdhc@1500 { @@ -153,6 +187,9 @@ interrupts = <8 0x8>; dmas = <&dma0 30>; dma-names = "rx-tx"; + clocks = <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SDHC>; + clock-names = "ipg", "per"; }; i2c@1700 { @@ -161,6 +198,8 @@ compatible = "fsl,mpc5121-i2c", "fsl-i2c"; reg = <0x1700 0x20>; interrupts = <9 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; }; i2c@1720 { @@ -169,6 +208,8 @@ compatible = "fsl,mpc5121-i2c", "fsl-i2c"; reg = <0x1720 0x20>; interrupts = <10 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; }; i2c@1740 { @@ -177,6 +218,8 @@ compatible = "fsl,mpc5121-i2c", "fsl-i2c"; reg = <0x1740 0x20>; interrupts = <11 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; }; i2ccontrol@1760 { @@ -188,30 +231,48 @@ compatible = "fsl,mpc5121-axe"; reg = <0x2000 0x100>; interrupts = <42 0x8>; + clocks = <&clks MPC512x_CLK_AXE>; + clock-names = "ipg"; }; display@2100 { compatible = "fsl,mpc5121-diu"; reg = <0x2100 0x100>; interrupts = <64 0x8>; + clocks = <&clks MPC512x_CLK_DIU>; + clock-names = "ipg"; }; can@2300 { compatible = "fsl,mpc5121-mscan"; reg = <0x2300 0x80>; interrupts = <90 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN2_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; }; can@2380 { compatible = "fsl,mpc5121-mscan"; reg = <0x2380 0x80>; interrupts = <91 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN3_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; }; viu@2400 { compatible = "fsl,mpc5121-viu"; reg = <0x2400 0x400>; interrupts = <67 0x8>; + clocks = <&clks MPC512x_CLK_VIU>; + clock-names = "ipg"; }; mdio@2800 { @@ -219,6 +280,8 @@ reg = <0x2800 0x800>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clks MPC512x_CLK_FEC>; + clock-names = "per"; }; eth0: ethernet@2800 { @@ -227,6 +290,8 @@ reg = <0x2800 0x800>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <4 0x8>; + clocks = <&clks MPC512x_CLK_FEC>; + clock-names = "per"; }; /* USB1 using external ULPI PHY */ @@ -238,6 +303,8 @@ interrupts = <43 0x8>; dr_mode = "otg"; phy_type = "ulpi"; + clocks = <&clks MPC512x_CLK_USB1>; + clock-names = "ipg"; }; /* USB0 using internal UTMI PHY */ @@ -249,6 +316,8 @@ interrupts = <44 0x8>; dr_mode = "otg"; phy_type = "utmi_wide"; + clocks = <&clks MPC512x_CLK_USB2>; + clock-names = "ipg"; }; /* IO control */ @@ -267,6 +336,8 @@ compatible = "fsl,mpc5121-pata"; reg = <0x10200 0x100>; interrupts = <5 0x8>; + clocks = <&clks MPC512x_CLK_PATA>; + clock-names = "ipg"; }; /* 512x PSCs are not 52xx PSC compatible */ @@ -278,6 +349,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC0>, + <&clks MPC512x_CLK_PSC0_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC1 */ @@ -287,6 +361,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC1>, + <&clks MPC512x_CLK_PSC1_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC2 */ @@ -296,6 +373,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC2>, + <&clks MPC512x_CLK_PSC2_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC3 */ @@ -305,6 +385,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC3>, + <&clks MPC512x_CLK_PSC3_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC4 */ @@ -314,6 +397,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC4>, + <&clks MPC512x_CLK_PSC4_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC5 */ @@ -323,6 +409,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC5>, + <&clks MPC512x_CLK_PSC5_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC6 */ @@ -332,6 +421,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC6>, + <&clks MPC512x_CLK_PSC6_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC7 */ @@ -341,6 +433,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC7>, + <&clks MPC512x_CLK_PSC7_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC8 */ @@ -350,6 +445,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC8>, + <&clks MPC512x_CLK_PSC8_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC9 */ @@ -359,6 +457,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC9>, + <&clks MPC512x_CLK_PSC9_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC10 */ @@ -368,6 +469,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC10>, + <&clks MPC512x_CLK_PSC10_MCLK>; + clock-names = "ipg", "mclk"; }; /* PSC11 */ @@ -377,12 +481,17 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC11>, + <&clks MPC512x_CLK_PSC11_MCLK>; + clock-names = "ipg", "mclk"; }; pscfifo@11f00 { compatible = "fsl,mpc5121-psc-fifo"; reg = <0x11f00 0x100>; interrupts = <40 0x8>; + clocks = <&clks MPC512x_CLK_PSC_FIFO>; + clock-names = "ipg"; }; dma0: dma@14000 { @@ -400,6 +509,8 @@ #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; + clocks = <&clks MPC512x_CLK_PCI>; + clock-names = "ipg"; reg = <0x80008500 0x100 /* internal registers */ 0x80008300 0x8>; /* config space access registers */ diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts index a618dfc13e4..e4f29747174 100644 --- a/arch/powerpc/boot/dts/mpc5125twr.dts +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -12,6 +12,8 @@ * option) any later version. */ +#include <dt-bindings/clock/mpc512x-clock.h> + /dts-v1/; / { @@ -54,6 +56,17 @@ reg = <0x30000000 0x08000>; // 32K at 0x30000000 }; + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + }; + soc@80000000 { compatible = "fsl,mpc5121-immr"; #address-cells = <1>; @@ -87,9 +100,12 @@ reg = <0xe00 0x100>; }; - clock@f00 { // Clock control + clks: clock@f00 { // Clock control compatible = "fsl,mpc5121-clock"; reg = <0xf00 0x100>; + #clock-cells = <1>; + clocks = <&osc>; + clock-names = "osc"; }; pmc@1000{ // Power Management Controller @@ -114,18 +130,33 @@ compatible = "fsl,mpc5121-mscan"; interrupts = <12 0x8>; reg = <0x1300 0x80>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN0_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; }; can@1380 { compatible = "fsl,mpc5121-mscan"; interrupts = <13 0x8>; reg = <0x1380 0x80>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN1_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; }; sdhc@1500 { compatible = "fsl,mpc5121-sdhc"; interrupts = <8 0x8>; reg = <0x1500 0x100>; + clocks = <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SDHC>; + clock-names = "ipg", "per"; }; i2c@1700 { @@ -134,6 +165,8 @@ compatible = "fsl,mpc5121-i2c", "fsl-i2c"; reg = <0x1700 0x20>; interrupts = <0x9 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; }; i2c@1720 { @@ -142,6 +175,8 @@ compatible = "fsl,mpc5121-i2c", "fsl-i2c"; reg = <0x1720 0x20>; interrupts = <0xa 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; }; i2c@1740 { @@ -150,6 +185,8 @@ compatible = "fsl,mpc5121-i2c", "fsl-i2c"; reg = <0x1740 0x20>; interrupts = <0xb 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; }; i2ccontrol@1760 { @@ -161,6 +198,8 @@ compatible = "fsl,mpc5121-diu"; reg = <0x2100 0x100>; interrupts = <64 0x8>; + clocks = <&clks MPC512x_CLK_DIU>; + clock-names = "ipg"; }; mdio@2800 { @@ -180,6 +219,8 @@ interrupts = <4 0x8>; phy-handle = < &phy0 >; phy-connection-type = "rmii"; + clocks = <&clks MPC512x_CLK_FEC>; + clock-names = "per"; }; // IO control @@ -200,6 +241,8 @@ interrupts = <43 0x8>; dr_mode = "host"; phy_type = "ulpi"; + clocks = <&clks MPC512x_CLK_USB1>; + clock-names = "ipg"; status = "disabled"; }; @@ -211,6 +254,9 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC1>, + <&clks MPC512x_CLK_PSC1_MCLK>; + clock-names = "ipg", "mclk"; }; // PSC9 uart1 aka ttyPSC1 @@ -220,12 +266,17 @@ interrupts = <40 0x8>; fsl,rx-fifo-size = <16>; fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC9>, + <&clks MPC512x_CLK_PSC9_MCLK>; + clock-names = "ipg", "mclk"; }; pscfifo@11f00 { compatible = "fsl,mpc5121-psc-fifo"; reg = <0x11f00 0x100>; interrupts = <40 0x8>; + clocks = <&clks MPC512x_CLK_PSC_FIFO>; + clock-names = "ipg"; }; dma@14000 { diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 2544f3ecd6e..20a0d22df47 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -68,7 +68,6 @@ }; MDIO: mdio@6000 { - device_type = "mdio"; compatible = "tsi108-mdio"; reg = <0x6000 0x50>; #address-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index e802ebd88cb..6d2cddf64cf 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -182,7 +182,6 @@ }; mdio@10d40 { - device_type = "mdio"; compatible = "fsl,mpc8272ads-mdio-bitbang", "fsl,mpc8272-mdio-bitbang", "fsl,cpm2-mdio-bitbang"; @@ -196,14 +195,12 @@ interrupt-parent = <&PIC>; interrupts = <23 8>; reg = <0x0>; - device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; interrupts = <23 8>; reg = <0x3>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts index 22b0832b6c3..651e4f55acd 100644 --- a/arch/powerpc/boot/dts/mpc8308_p1m.dts +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts @@ -189,13 +189,11 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&ipic>; interrupts = <19 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts index f66d10d95a8..9ce45f2efd3 100644 --- a/arch/powerpc/boot/dts/mpc8308rdb.dts +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -166,7 +166,6 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 1c836c6c5be..4b635dc4ecd 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -217,7 +217,6 @@ interrupt-parent = <&ipic>; interrupts = <20 0x8>; reg = <0x4>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 811848e93ae..43546844ea5 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -216,14 +216,12 @@ interrupt-parent = <&ipic>; interrupts = <20 0x8>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&ipic>; interrupts = <19 0x8>; reg = <0x1>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index da9c72ddc34..0793cdf0d46 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -356,13 +356,11 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x3>; - device_type = "ethernet-phy"; }; phy4: ethernet-phy@04 { interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x4>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index ff7b15b340a..91df1eb1666 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -314,13 +314,11 @@ interrupt-parent = <&ipic>; interrupts = <0>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy04:ethernet-phy@04 { interrupt-parent = <&ipic>; interrupts = <0>; reg = <0x4>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 2608679d0d4..cf8542401a3 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -240,7 +240,6 @@ interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x1c>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 6cd044d8fb8..f00066dcc8d 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -176,7 +176,6 @@ interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x1c>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 4552864082c..4843c3ff716 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -193,14 +193,12 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x1>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 81dd513d630..ecb6ccd3a6a 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -397,13 +397,11 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@01 { interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x1>; - device_type = "ethernet-phy"; }; tbi-phy@2 { device_type = "tbi-phy"; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index b6e9aec1d86..daeacbdcf8b 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -332,25 +332,21 @@ reg = <0x2120 0x18>; phy1: ethernet-phy@1 { - device_type = "ethernet-phy"; compatible = "national,DP83848VV"; reg = <1>; }; phy2: ethernet-phy@2 { - device_type = "ethernet-phy"; compatible = "broadcom,BCM5481UA2KMLG"; reg = <2>; }; phy3: ethernet-phy@3 { - device_type = "ethernet-phy"; compatible = "national,DP83848VV"; reg = <3>; }; phy4: ethernet-phy@4 { - device_type = "ethernet-phy"; compatible = "broadcom,BCM5481UA2KMLG"; reg = <4>; }; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index cfccef57cd1..c2c062e8175 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -225,14 +225,12 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 353deff1b7f..2b4b6532d69 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -277,7 +277,6 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts index ef4a305a0d0..c0c790168b9 100644 --- a/arch/powerpc/boot/dts/mpc8377_wlan.dts +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -253,14 +253,12 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 538fcb92733..1b82b77f941 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -264,14 +264,12 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 32333a908f3..74b6a535a41 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -277,7 +277,6 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 5387092fdfb..38e5048d65d 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -262,14 +262,12 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&ipic>; interrupts = <18 0x8>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 46224c2430f..3b5cbac8536 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -275,7 +275,6 @@ interrupt-parent = <&ipic>; interrupts = <17 0x8>; reg = <0x2>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi index 7c3dde84d19..937ad7e4611 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dtsi +++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi @@ -200,12 +200,10 @@ phy0: ethernet-phy@0 { interrupts = <10 0x1 0 0>; reg = <0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupts = <10 0x1 0 0>; reg = <1>; - device_type = "ethernet-phy"; }; sgmii_phy0: sgmii-phy@0 { interrupts = <6 1 0 0>; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 2d31863accf..7ce274c9a2d 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -165,19 +165,16 @@ interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x1>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <7 1>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 1c03c266737..4d35a3e0fb0 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -165,13 +165,11 @@ interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x1>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi index b219d035d79..47d986b041f 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dtsi +++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi @@ -82,12 +82,10 @@ phy0: ethernet-phy@0 { interrupts = <10 1 0 0>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupts = <10 1 0 0>; reg = <0x1>; - device_type = "ethernet-phy"; }; sgmii_phy0: sgmii-phy@0 { diff --git a/arch/powerpc/boot/dts/mpc8548cds.dtsi b/arch/powerpc/boot/dts/mpc8548cds.dtsi index c61f525e474..3bc7d471122 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dtsi +++ b/arch/powerpc/boot/dts/mpc8548cds.dtsi @@ -109,22 +109,18 @@ phy0: ethernet-phy@0 { interrupts = <5 1 0 0>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupts = <5 1 0 0>; reg = <0x1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupts = <5 1 0 0>; reg = <0x2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupts = <5 1 0 0>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 36a7ea138c2..f115f21cb0a 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -165,13 +165,11 @@ interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x1>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 1a43f5a968f..0d70921d612 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -154,25 +154,21 @@ interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <7 1>; reg = <0x2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <7 1>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 09598bb5d44..bead2b655b9 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -91,22 +91,18 @@ phy0: ethernet-phy@7 { interrupts = <1 1 0 0>; reg = <0x7>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupts = <2 1 0 0>; reg = <0x1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupts = <1 1 0 0>; reg = <0x2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupts = <2 1 0 0>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; @@ -236,25 +232,21 @@ interrupt-parent = <&mpic>; interrupts = <1 1 0 0>; reg = <0x7>; - device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; interrupts = <2 1 0 0>; reg = <0x1>; - device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; interrupts = <1 1 0 0>; reg = <0x2>; - device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; interrupts = <2 1 0 0>; reg = <0x3>; - device_type = "ethernet-phy"; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index fe0d60935e9..d0dcdafa5eb 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -276,33 +276,27 @@ interrupt-parent = <&mpic>; interrupts = <1 1 0 0>; reg = <0x7>; - device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { interrupt-parent = <&mpic>; interrupts = <2 1 0 0>; reg = <0x1>; - device_type = "ethernet-phy"; }; qe_phy2: ethernet-phy@02 { interrupt-parent = <&mpic>; interrupts = <3 1 0 0>; reg = <0x2>; - device_type = "ethernet-phy"; }; qe_phy3: ethernet-phy@03 { interrupt-parent = <&mpic>; interrupts = <4 1 0 0>; reg = <0x3>; - device_type = "ethernet-phy"; }; qe_phy5: ethernet-phy@04 { reg = <0x04>; - device_type = "ethernet-phy"; }; qe_phy7: ethernet-phy@06 { reg = <0x6>; - device_type = "ethernet-phy"; }; tbi1: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 1e8666ccbed..1c03060dd0b 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -211,25 +211,21 @@ interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts index fd4cd4da60b..bb575e28042 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts @@ -211,25 +211,21 @@ interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index bd700651f36..34c1f48b1a0 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -74,7 +74,6 @@ #size-cells = <0>; PHY: ethernet-phy@f { reg = <0xf>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index b123e9f7a5a..4e93bd961e0 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -86,17 +86,14 @@ PHY0: ethernet-phy@0 { reg = <0x0>; - device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { reg = <0x1>; - device_type = "ethernet-phy"; }; PHY2: ethernet-phy@2 { reg = <0x2>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/mvme5100.dts b/arch/powerpc/boot/dts/mvme5100.dts new file mode 100644 index 00000000000..1ecb341a232 --- /dev/null +++ b/arch/powerpc/boot/dts/mvme5100.dts @@ -0,0 +1,185 @@ +/* + * Device Tree Source for Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "MVME5100"; + compatible = "MVME5100"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,7410 { + device_type = "cpu"; + reg = <0x0>; + /* Following required by dtc but not used */ + d-cache-line-size = <32>; + i-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + timebase-frequency = <25000000>; + clock-frequency = <500000000>; + bus-frequency = <100000000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + hawk@fef80000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "hawk-bridge", "simple-bus"; + ranges = <0x0 0xfef80000 0x10000>; + reg = <0xfef80000 0x10000>; + + serial0: serial@8000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8000 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + serial1: serial@8200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8200 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@f3f80000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0xf3f80000 0x40000>; + }; + }; + + pci0: pci@feff0000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "hawk-pci"; + reg = <0xfec00000 0x400000>; + 8259-interrupt-acknowledge = <0xfeff0030>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* + * This definition (IDSEL 11) duplicates the + * interrupts definition in the i8259 + * interrupt controller below. + * + * Do not change the interrupt sense/polarity from + * 0x2 to anything else, doing so will cause endless + * "spurious" i8259 interrupts to be fielded. + */ + // IDSEL 11 - iPMC712 PCI/ISA Bridge + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x2 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x3 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x4 &mpic 0x0 0x2 + + /* IDSEL 12 - Not Used */ + + /* IDSEL 13 - Universe VME Bridge */ + 0x6800 0x0 0x0 0x1 &mpic 0x5 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x6 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x7 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x8 0x1 + + /* IDSEL 14 - ENET 1 */ + 0x7000 0x0 0x0 0x1 &mpic 0x2 0x1 + + /* IDSEL 15 - Not Used */ + + /* IDSEL 16 - PMC Slot 1 */ + 0x8000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0xc 0x1 + + /* IDSEL 17 - PMC Slot 2 */ + 0x8800 0x0 0x0 0x1 &mpic 0xc 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x9 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0xa 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0xb 0x1 + + /* IDSEL 18 - Not Used */ + + /* IDSEL 19 - ENET 2 */ + 0x9800 0x0 0x0 0x1 &mpic 0xd 0x1 + + /* IDSEL 20 - PMCSPAN (PCI-X) */ + 0xa000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0xc 0x1 + + >; + + isa { + #address-cells = <2>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "isa"; + compatible = "isa"; + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + #interrupt-cells = <2>; + #address-cells = <0>; + interrupts = <0 2>; + device_type = "interrupt-controller"; + compatible = "chrp,iic"; + interrupt-controller; + reg = <1 0x00000020 0x00000002 + 1 0x000000a0 0x00000002 + 1 0x000004d0 0x00000002>; + interrupt-parent = <&mpic>; + }; + + }; + + }; + + chosen { + linux,stdout-path = &serial0; + }; + +}; diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/p1010rdb-pa.dts new file mode 100644 index 00000000000..767d4c03285 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pa.dts @@ -0,0 +1,23 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi new file mode 100644 index 00000000000..434fb2d5857 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi @@ -0,0 +1,85 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc_nand { + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Area */ + reg = <0x01900000 0x00700000>; + label = "NAND User area"; + }; +}; + +&phy0 { + interrupts = <1 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <4 1 0 0>; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts index 64776f4a465..3033371bc00 100644 --- a/arch/powerpc/boot/dts/p1010rdb_36b.dts +++ b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts @@ -38,52 +38,9 @@ model = "fsl,P1010RDB"; compatible = "fsl,P1010RDB"; - memory { - device_type = "memory"; - }; - - board_ifc: ifc: ifc@fffe1e000 { - /* NOR, NAND Flashes and CPLD on board */ - ranges = <0x0 0x0 0xf 0xee000000 0x02000000 - 0x1 0x0 0xf 0xff800000 0x00010000 - 0x3 0x0 0xf 0xffb00000 0x00000020>; - reg = <0xf 0xffe1e000 0 0x2000>; - }; - - board_soc: soc: soc@fffe00000 { - ranges = <0x0 0xf 0xffe00000 0x100000>; - }; - - pci0: pcie@fffe09000 { - reg = <0xf 0xffe09000 0 0x1000>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@fffe0a000 { - reg = <0xf 0xffe0a000 0 0x1000>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; + /include/ "p1010rdb_36b.dtsi" }; /include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" /include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/p1010rdb-pb.dts new file mode 100644 index 00000000000..6eeb7d3185b --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pb.dts @@ -0,0 +1,35 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts new file mode 100644 index 00000000000..7ab3c907b32 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts @@ -0,0 +1,58 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_36b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts deleted file mode 100644 index b868d22984e..00000000000 --- a/arch/powerpc/boot/dts/p1010rdb.dts +++ /dev/null @@ -1,66 +0,0 @@ -/* - * P1010 RDB Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "fsl/p1010si-pre.dtsi" - -/ { - model = "fsl,P1010RDB"; - compatible = "fsl,P1010RDB"; - - memory { - device_type = "memory"; - }; - - board_ifc: ifc: ifc@ffe1e000 { - /* NOR, NAND Flashes and CPLD on board */ - ranges = <0x0 0x0 0x0 0xee000000 0x02000000 - 0x1 0x0 0x0 0xff800000 0x00010000 - 0x3 0x0 0x0 0xffb00000 0x00000020>; - reg = <0x0 0xffe1e000 0 0x2000>; - }; - - board_soc: soc: soc@ffe00000 { - ranges = <0x0 0x0 0xffe00000 0x100000>; - }; - - pci0: pcie@ffe09000 { - reg = <0 0xffe09000 0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@ffe0a000 { - reg = <0 0xffe0a000 0 0x1000>; - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; -}; - -/include/ "p1010rdb.dtsi" -/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi index ec7c27a6467..ea534efa790 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dtsi +++ b/arch/powerpc/boot/dts/p1010rdb.dtsi @@ -69,49 +69,11 @@ }; }; - nand@1,0 { + ifc_nand: nand@1,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,ifc-nand"; reg = <0x1 0x0 0x10000>; - - partition@0 { - /* This location must not be altered */ - /* 1MB for u-boot Bootloader Image */ - reg = <0x0 0x00100000>; - label = "NAND U-Boot Image"; - read-only; - }; - - partition@100000 { - /* 1MB for DTB Image */ - reg = <0x00100000 0x00100000>; - label = "NAND DTB Image"; - }; - - partition@200000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00200000 0x00400000>; - label = "NAND Linux Kernel Image"; - }; - - partition@600000 { - /* 4MB for Compressed Root file System Image */ - reg = <0x00600000 0x00400000>; - label = "NAND Compressed RFS Image"; - }; - - partition@a00000 { - /* 15MB for JFFS2 based Root file System */ - reg = <0x00a00000 0x00f00000>; - label = "NAND JFFS2 Root File System"; - }; - - partition@1900000 { - /* 7MB for User Area */ - reg = <0x01900000 0x00700000>; - label = "NAND User area"; - }; }; cpld@3,0 { @@ -193,17 +155,14 @@ mdio@24000 { phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; reg = <0x1>; }; phy1: ethernet-phy@1 { - interrupts = <2 1 0 0>; reg = <0x0>; }; phy2: ethernet-phy@2 { - interrupts = <2 1 0 0>; reg = <0x2>; }; diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi new file mode 100644 index 00000000000..fdc19aab2f7 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@ffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xff800000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00000020>; + reg = <0x0 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; +}; + +pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi new file mode 100644 index 00000000000..de2fceed4f7 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@fffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0xf 0xee000000 0x02000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x3 0x0 0xf 0xffb00000 0x00000020>; + reg = <0xf 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; +}; + +pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts index 97116f198a3..76559044df4 100644 --- a/arch/powerpc/boot/dts/p1021mds.dts +++ b/arch/powerpc/boot/dts/p1021mds.dts @@ -295,13 +295,11 @@ interrupt-parent = <&mpic>; interrupts = <4 1 0 0>; reg = <0x0>; - device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@03 { interrupt-parent = <&mpic>; interrupts = <5 1 0 0>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi index 873da350d01..957e0dc1dc0 100644 --- a/arch/powerpc/boot/dts/p1022ds.dtsi +++ b/arch/powerpc/boot/dts/p1022ds.dtsi @@ -146,8 +146,9 @@ */ }; rtc@68 { - compatible = "dallas,ds1339"; + compatible = "dallas,ds3232"; reg = <0x68>; + interrupts = <0x1 0x1 0 0>; }; adt7461@4c { compatible = "adi,adt7461"; diff --git a/arch/powerpc/boot/dts/p1025rdb_32b.dts b/arch/powerpc/boot/dts/p1025rdb_32b.dts index ac5729c14ed..a2ed6280ba7 100644 --- a/arch/powerpc/boot/dts/p1025rdb_32b.dts +++ b/arch/powerpc/boot/dts/p1025rdb_32b.dts @@ -105,13 +105,11 @@ interrupt-parent = <&mpic>; interrupts = <4 1 0 0>; reg = <0x6>; - device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@03 { interrupt-parent = <&mpic>; interrupts = <5 1 0 0>; reg = <0x3>; - device_type = "ethernet-phy"; }; tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/p1025twr.dts b/arch/powerpc/boot/dts/p1025twr.dts new file mode 100644 index 00000000000..9036a498790 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dts @@ -0,0 +1,95 @@ +/* + * P1025 TWR Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025"; + compatible = "fsl,TWR-P1025"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR Flash and SSD1289 */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x2 0x0 0x0 0xe0000000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1025twr.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/p1025twr.dtsi new file mode 100644 index 00000000000..8453501c256 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dtsi @@ -0,0 +1,280 @@ +/* + * P1025 TWR Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/{ + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; +}; + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 5.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00580000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 56.75MB for Root file System */ + reg = <0x00600000 0x038c0000>; + label = "NOR Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x03ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + /* CS2 for Display */ + display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; + }; + +}; + +&soc { + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@18 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x18>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/boot/dts/ppa8548.dts b/arch/powerpc/boot/dts/ppa8548.dts index f97eceed610..27b0699ee92 100644 --- a/arch/powerpc/boot/dts/ppa8548.dts +++ b/arch/powerpc/boot/dts/ppa8548.dts @@ -110,12 +110,10 @@ phy0: ethernet-phy@0 { interrupts = <7 1 0 0>; reg = <0x0>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { interrupts = <8 1 0 0>; reg = <0x1>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts index 0bb66937674..0c525ff0c25 100644 --- a/arch/powerpc/boot/dts/pq2fads.dts +++ b/arch/powerpc/boot/dts/pq2fads.dts @@ -198,7 +198,6 @@ }; mdio@10d40 { - device_type = "mdio"; compatible = "fsl,pq2fads-mdio-bitbang", "fsl,mpc8280-mdio-bitbang", "fsl,cpm2-mdio-bitbang"; @@ -212,14 +211,12 @@ interrupt-parent = <&PIC>; interrupts = <25 2>; reg = <0x0>; - device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; interrupts = <25 2>; reg = <0x3>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index 1ee6ff43dd5..00afaacf8c8 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -73,17 +73,14 @@ mdio { #address-cells = <1>; #size-cells = <0>; - device_type = "mdio"; compatible = "marvell,mv64360-mdio"; PHY0: ethernet-phy@1 { - device_type = "ethernet-phy"; compatible = "broadcom,bcm5421"; interrupts = <76>; /* GPP 12 */ interrupt-parent = <&PIC>; reg = <1>; }; PHY1: ethernet-phy@3 { - device_type = "ethernet-phy"; compatible = "broadcom,bcm5421"; interrupts = <76>; /* GPP 12 */ interrupt-parent = <&PIC>; @@ -162,7 +159,6 @@ }; MPSC0: mpsc@8000 { - device_type = "serial"; compatible = "marvell,mv64360-mpsc"; reg = <0x8000 0x38>; virtual-reg = <0xf1008000>; @@ -177,7 +173,6 @@ }; MPSC1: mpsc@9000 { - device_type = "serial"; compatible = "marvell,mv64360-mpsc"; reg = <0x9000 0x38>; virtual-reg = <0xf1009000>; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index b1e45a8537a..fc89e00b765 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -173,14 +173,12 @@ interrupt-parent = <&ipic>; interrupts = <20 0x8>; reg = <0x19>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1a { interrupt-parent = <&ipic>; interrupts = <21 0x8>; reg = <0x1a>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { diff --git a/arch/powerpc/boot/dts/sbc8548-post.dtsi b/arch/powerpc/boot/dts/sbc8548-post.dtsi index 33a47e27a11..9b505c8e535 100644 --- a/arch/powerpc/boot/dts/sbc8548-post.dtsi +++ b/arch/powerpc/boot/dts/sbc8548-post.dtsi @@ -137,13 +137,11 @@ interrupt-parent = <&mpic>; interrupts = <0x6 0x1>; reg = <0x19>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@1a { interrupt-parent = <&mpic>; interrupts = <0x7 0x1>; reg = <0x1a>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts index 56bebce8784..631ede72e22 100644 --- a/arch/powerpc/boot/dts/sbc8641d.dts +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -230,25 +230,21 @@ interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <0x1f>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@0 { interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <0>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <1>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <10 1>; reg = <2>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts index b670d03fbcd..78a72ee4820 100644 --- a/arch/powerpc/boot/dts/stx_gp3_8560.dts +++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts @@ -161,13 +161,11 @@ interrupt-parent = <&mpic>; interrupts = <5 4>; reg = <2>; - device_type = "ethernet-phy"; }; phy4: ethernet-phy@4 { interrupt-parent = <&mpic>; interrupts = <5 4>; reg = <4>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts index 4f166b01c1b..859f854ba53 100644 --- a/arch/powerpc/boot/dts/stxssa8555.dts +++ b/arch/powerpc/boot/dts/stxssa8555.dts @@ -164,13 +164,11 @@ interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x2>; - device_type = "ethernet-phy"; }; phy1: ethernet-phy@4 { interrupt-parent = <&mpic>; interrupts = <5 1>; reg = <0x4>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index ed264d9ae35..91cbd7acd27 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -172,19 +172,16 @@ interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index 92524211581..84dce2d5fc4 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -172,19 +172,16 @@ interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 6e1ac50852a..7a333dd02d9 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -185,31 +185,26 @@ interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <3>; - device_type = "ethernet-phy"; }; phy4: ethernet-phy@4 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <4>; - device_type = "ethernet-phy"; }; phy5: ethernet-phy@5 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <5>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 161e75eac7f..c737caff10c 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -185,31 +185,26 @@ interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <3>; - device_type = "ethernet-phy"; }; phy4: ethernet-phy@4 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <4>; - device_type = "ethernet-phy"; }; phy5: ethernet-phy@5 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <5>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index aa6ff0d3dd9..d0416a5cddd 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -172,19 +172,16 @@ interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index 7665a16a8b9..f9a11ebf736 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -174,19 +174,16 @@ interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <1>; - device_type = "ethernet-phy"; }; phy2: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <2>; - device_type = "ethernet-phy"; }; phy3: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <3>; - device_type = "ethernet-phy"; }; tbi0: tbi-phy@11 { reg = <0x11>; diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts index c3dba2518d8..3d1446b99c7 100644 --- a/arch/powerpc/boot/dts/tqm8xx.dts +++ b/arch/powerpc/boot/dts/tqm8xx.dts @@ -107,7 +107,6 @@ #size-cells = <0>; PHY: ethernet-phy@f { reg = <0xf>; - device_type = "ethernet-phy"; }; }; diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts index fc7073bc547..391a4e29978 100644 --- a/arch/powerpc/boot/dts/virtex440-ml507.dts +++ b/arch/powerpc/boot/dts/virtex440-ml507.dts @@ -257,6 +257,8 @@ #size-cells = <1>; compatible = "xlnx,compound"; ethernet@81c00000 { + #address-cells = <1>; + #size-cells = <0>; compatible = "xlnx,xps-ll-temac-1.01.b"; device_type = "network"; interrupt-parent = <&xps_intc_0>; diff --git a/arch/powerpc/boot/mvme5100.c b/arch/powerpc/boot/mvme5100.c new file mode 100644 index 00000000000..cb865f83c60 --- /dev/null +++ b/arch/powerpc/boot/mvme5100.c @@ -0,0 +1,27 @@ +/* + * Motorola/Emerson MVME5100 with PPCBug firmware. + * + * Author: Stephen Chivers <schivers@csc.com> + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ +#include "types.h" +#include "ops.h" +#include "io.h" + +BSS_STACK(4096); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize; + + heapsize = 0x8000000 - (u32)_end; /* 128M */ + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 2e1af74a64b..d27a25518b0 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -265,6 +265,10 @@ epapr) link_address='0x20000000' pie=-pie ;; +mvme5100) + platformo="$object/fixed-head.o $object/mvme5100.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" diff --git a/arch/powerpc/configs/85xx/p1023_defconfig b/arch/powerpc/configs/85xx/p1023_defconfig deleted file mode 100644 index b06d37da44f..00000000000 --- a/arch/powerpc/configs/85xx/p1023_defconfig +++ /dev/null @@ -1,188 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_RCU_FANOUT=32 -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_P1023_RDB=y -CONFIG_P1023_RDS=y -CONFIG_QUICC_ENGINE=y -CONFIG_QE_GPIO=y -CONFIG_CPM2=y -CONFIG_HIGHMEM=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -CONFIG_SWIOTLB=y -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEAER is not set -# CONFIG_PCIEASPM is not set -CONFIG_PCI_MSI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -CONFIG_INET_ESP=y -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_IP_SCTP=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_LEGACY=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_LOGGING=y -CONFIG_ATA=y -CONFIG_SATA_FSL=y -CONFIG_SATA_SIL24=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_FS_ENET=y -CONFIG_FSL_PQ_MDIO=y -CONFIG_E1000E=y -CONFIG_PHYLIB=y -CONFIG_AT803X_PHY=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_FIXED_PHY=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_CPM=m -CONFIG_I2C_MPC=y -CONFIG_GPIO_MPC8XXX=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_STORAGE=y -CONFIG_EDAC=y -CONFIG_EDAC_MM_EDAC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_CMOS=y -CONFIG_DMADEVICES=y -CONFIG_FSL_DMA=y -# CONFIG_NET_DMA is not set -CONFIG_STAGING=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_ADFS_FS=m -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -CONFIG_VXFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_CRC_T10DIF=y -CONFIG_FRAME_WARN=8092 -CONFIG_DEBUG_FS=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -CONFIG_STRICT_DEVMEM=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 69128740c14..15b1ff5d96e 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -70,3 +70,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 219fd470ed2..b8a79d7ee89 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -72,3 +72,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index d2e0fab5ee5..83d3550fdb5 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -31,6 +31,7 @@ CONFIG_C293_PCIE=y CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1022_RDK=y +CONFIG_P1023_RDB=y CONFIG_P1023_RDS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y @@ -113,6 +114,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -211,6 +213,7 @@ CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_CMOS=y +CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 4cb7b59e98b..4b686294feb 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -34,6 +34,7 @@ CONFIG_C293_PCIE=y CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1022_RDK=y +CONFIG_P1023_RDB=y CONFIG_P1023_RDS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y @@ -116,6 +117,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -212,6 +214,7 @@ CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_CMOS=y +CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 5c258823e69..d954e80c286 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -55,3 +55,4 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_CRC_CCITT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 9e146cdf63d..3f47d00a10c 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -78,3 +78,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/configs/mvme5100_defconfig b/arch/powerpc/configs/mvme5100_defconfig new file mode 100644 index 00000000000..93c7752e2db --- /dev/null +++ b/arch/powerpc/configs/mvme5100_defconfig @@ -0,0 +1,144 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_PPC_CHRP is not set +# CONFIG_PPC_PMAC is not set +CONFIG_EMBEDDED6xx=y +CONFIG_MVME5100=y +CONFIG_KVM_GUEST=y +CONFIG_HZ_100=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_COMPACTION is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,9600 ip=dhcp root=/dev/nfs" +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_LAPB=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_EEPROM_LEGACY=m +CONFIG_NETDEVICES=y +CONFIG_TUN=m +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_E100=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=10 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MPC=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_VME_BUS=m +CONFIG_VME_CA91CX42=m +CONFIG_EXT2_FS=m +CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_XFS_FS=m +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +CONFIG_CIFS=m +CONFIG_NLS=y +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_UTF8=m +CONFIG_CRC_CCITT=m +CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20 +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 581a3bcae72..e015896b7e5 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -186,6 +186,7 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_ALUA=m CONFIG_ATA=y CONFIG_SATA_SIL24=y +CONFIG_SATA_MV=y CONFIG_SATA_SVW=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y diff --git a/arch/powerpc/configs/tqm8xx_defconfig b/arch/powerpc/configs/tqm8xx_defconfig index 8616fde0896..4b6f8bf104e 100644 --- a/arch/powerpc/configs/tqm8xx_defconfig +++ b/arch/powerpc/configs/tqm8xx_defconfig @@ -84,3 +84,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild index d8f9d2f18a2..6c0a955a1b0 100644 --- a/arch/powerpc/include/asm/Kbuild +++ b/arch/powerpc/include/asm/Kbuild @@ -3,4 +3,5 @@ generic-y += clkdev.h generic-y += rwsem.h generic-y += trace_clock.h generic-y += preempt.h -generic-y += vtime.h
\ No newline at end of file +generic-y += vtime.h +generic-y += hash.h diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index 910194e9a1e..a5e9a7d494d 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -46,6 +46,11 @@ #include <asm/asm-compat.h> #include <asm/synch.h> +/* PPC bit number conversion */ +#define PPC_BITLSHIFT(be) (BITS_PER_LONG - 1 - (be)) +#define PPC_BIT(bit) (1UL << PPC_BITLSHIFT(bit)) +#define PPC_BITMASK(bs, be) ((PPC_BIT(bs) - PPC_BIT(be)) | PPC_BIT(bs)) + /* * clear_bit doesn't imply a memory barrier */ diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index 9e495c9a6a8..ed0afc1e44a 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -41,8 +41,20 @@ struct ppc64_caches { extern struct ppc64_caches ppc64_caches; #endif /* __powerpc64__ && ! __ASSEMBLY__ */ -#if !defined(__ASSEMBLY__) +#if defined(__ASSEMBLY__) +/* + * For a snooping icache, we still need a dummy icbi to purge all the + * prefetched instructions from the ifetch buffers. We also need a sync + * before the icbi to order the the actual stores to memory that might + * have modified instructions with the icbi. + */ +#define PURGE_PREFETCHED_INS \ + sync; \ + icbi 0,r3; \ + sync; \ + isync +#else #define __read_mostly __attribute__((__section__(".data..read_mostly"))) #ifdef CONFIG_6xx diff --git a/arch/powerpc/include/asm/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h deleted file mode 100644 index ab1882c1e17..00000000000 --- a/arch/powerpc/include/asm/clk_interface.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_POWERPC_CLK_INTERFACE_H -#define __ASM_POWERPC_CLK_INTERFACE_H - -#include <linux/clk.h> - -struct clk_interface { - struct clk* (*clk_get) (struct device *dev, const char *id); - int (*clk_enable) (struct clk *clk); - void (*clk_disable) (struct clk *clk); - unsigned long (*clk_get_rate) (struct clk *clk); - void (*clk_put) (struct clk *clk); - long (*clk_round_rate) (struct clk *clk, unsigned long rate); - int (*clk_set_rate) (struct clk *clk, unsigned long rate); - int (*clk_set_parent) (struct clk *clk, struct clk *parent); - struct clk* (*clk_get_parent) (struct clk *clk); -}; - -extern struct clk_interface clk_functions; - -#endif /* __ASM_POWERPC_CLK_INTERFACE_H */ diff --git a/arch/powerpc/include/asm/cmpxchg.h b/arch/powerpc/include/asm/cmpxchg.h index e245aab7f19..d463c68fe7f 100644 --- a/arch/powerpc/include/asm/cmpxchg.h +++ b/arch/powerpc/include/asm/cmpxchg.h @@ -300,6 +300,7 @@ __cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ cmpxchg_local((ptr), (o), (n)); \ }) +#define cmpxchg64_relaxed cmpxchg64_local #else #include <asm-generic/cmpxchg-local.h> #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h index a6f8c7a5cbb..97e02f985df 100644 --- a/arch/powerpc/include/asm/code-patching.h +++ b/arch/powerpc/include/asm/code-patching.h @@ -34,6 +34,13 @@ int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr); unsigned long branch_target(const unsigned int *instr); unsigned int translate_branch(const unsigned int *dest, const unsigned int *src); +#ifdef CONFIG_PPC_BOOK3E_64 +void __patch_exception(int exc, unsigned long addr); +#define patch_exception(exc, name) do { \ + extern unsigned int name; \ + __patch_exception((exc), (unsigned long)&name); \ +} while (0) +#endif static inline unsigned long ppc_function_entry(void *func) { diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h index 84fdf6857c3..a613d2c82fd 100644 --- a/arch/powerpc/include/asm/compat.h +++ b/arch/powerpc/include/asm/compat.h @@ -200,10 +200,11 @@ static inline void __user *arch_compat_alloc_user_space(long len) /* * We can't access below the stack pointer in the 32bit ABI and - * can access 288 bytes in the 64bit ABI + * can access 288 bytes in the 64bit big-endian ABI, + * or 512 bytes with the new ELFv2 little-endian ABI. */ if (!is_32bit_task()) - usp -= 288; + usp -= USER_REDZONE_SIZE; return (void __user *) (usp - len); } diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 0d4939ba48e..617cc767c07 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -90,6 +90,18 @@ struct cpu_spec { * if the error is fatal, 1 if it was fully recovered and 0 to * pass up (not CPU originated) */ int (*machine_check)(struct pt_regs *regs); + + /* + * Processor specific early machine check handler which is + * called in real mode to handle SLB and TLB errors. + */ + long (*machine_check_early)(struct pt_regs *regs); + + /* + * Processor specific routine to flush tlbs. + */ + void (*flush_tlb)(unsigned long inval_selector); + }; extern struct cpu_spec *cur_cpu_spec; diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index e27e9ad6818..150866b2a3f 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -134,6 +134,7 @@ static inline int dma_supported(struct device *dev, u64 mask) } extern int dma_set_mask(struct device *dev, u64 dma_mask); +extern int __dma_set_mask(struct device *dev, u64 dma_mask); #define dma_alloc_coherent(d,s,h,f) dma_alloc_attrs(d,s,h,f,NULL) diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index d3e5e9bc8f9..d4dd41fb951 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -90,7 +90,8 @@ struct eeh_pe { #define EEH_DEV_IRQ_DISABLED (1 << 3) /* Interrupt disabled */ #define EEH_DEV_DISCONNECTED (1 << 4) /* Removing from PE */ -#define EEH_DEV_SYSFS (1 << 8) /* Sysfs created */ +#define EEH_DEV_NO_HANDLER (1 << 8) /* No error handler */ +#define EEH_DEV_SYSFS (1 << 9) /* Sysfs created */ struct eeh_dev { int mode; /* EEH mode */ @@ -117,6 +118,16 @@ static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev) return edev ? edev->pdev : NULL; } +/* Return values from eeh_ops::next_error */ +enum { + EEH_NEXT_ERR_NONE = 0, + EEH_NEXT_ERR_INF, + EEH_NEXT_ERR_FROZEN_PE, + EEH_NEXT_ERR_FENCED_PHB, + EEH_NEXT_ERR_DEAD_PHB, + EEH_NEXT_ERR_DEAD_IOC +}; + /* * The struct is used to trace the registered EEH operation * callback functions. Actually, those operation callback @@ -157,13 +168,24 @@ struct eeh_ops { int (*read_config)(struct device_node *dn, int where, int size, u32 *val); int (*write_config)(struct device_node *dn, int where, int size, u32 val); int (*next_error)(struct eeh_pe **pe); + int (*restore_config)(struct device_node *dn); }; extern struct eeh_ops *eeh_ops; -extern int eeh_subsystem_enabled; +extern bool eeh_subsystem_enabled; extern raw_spinlock_t confirm_error_lock; extern int eeh_probe_mode; +static inline bool eeh_enabled(void) +{ + return eeh_subsystem_enabled; +} + +static inline void eeh_set_enable(bool mode) +{ + eeh_subsystem_enabled = mode; +} + #define EEH_PROBE_MODE_DEV (1<<0) /* From PCI device */ #define EEH_PROBE_MODE_DEVTREE (1<<1) /* From device tree */ @@ -234,7 +256,7 @@ void eeh_remove_device(struct pci_dev *); * If this macro yields TRUE, the caller relays to eeh_check_failure() * which does further tests out of line. */ -#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) +#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_enabled()) /* * Reads from a device which has been isolated by EEH will return @@ -245,6 +267,13 @@ void eeh_remove_device(struct pci_dev *); #else /* !CONFIG_EEH */ +static inline bool eeh_enabled(void) +{ + return false; +} + +static inline void eeh_set_enable(bool mode) { } + static inline int eeh_init(void) { return 0; diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 243ce69ad68..66830618cc1 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -301,9 +301,12 @@ do_kvm_##n: \ beq 4f; /* if from kernel mode */ \ ACCOUNT_CPU_USER_ENTRY(r9, r10); \ SAVE_PPR(area, r9, r10); \ -4: std r2,GPR2(r1); /* save r2 in stackframe */ \ - SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ - SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ +4: EXCEPTION_PROLOG_COMMON_2(area) \ + EXCEPTION_PROLOG_COMMON_3(n) \ + ACCOUNT_STOLEN_TIME + +/* Save original regs values from save area to stack frame. */ +#define EXCEPTION_PROLOG_COMMON_2(area) \ ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ ld r10,area+EX_R10(r13); \ std r9,GPR9(r1); \ @@ -318,11 +321,16 @@ do_kvm_##n: \ ld r10,area+EX_CFAR(r13); \ std r10,ORIG_GPR3(r1); \ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \ + GET_CTR(r10, area); \ + std r10,_CTR(r1); + +#define EXCEPTION_PROLOG_COMMON_3(n) \ + std r2,GPR2(r1); /* save r2 in stackframe */ \ + SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ + SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ mflr r9; /* Get LR, later save to stack */ \ ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ std r9,_LINK(r1); \ - GET_CTR(r10, area); \ - std r10,_CTR(r1); \ lbz r10,PACASOFTIRQEN(r13); \ mfspr r11,SPRN_XER; /* save XER in stackframe */ \ std r10,SOFTE(r1); \ @@ -332,8 +340,7 @@ do_kvm_##n: \ li r10,0; \ ld r11,exception_marker@toc(r2); \ std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ - ACCOUNT_STOLEN_TIME + std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ /* * Exception vectors. diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h index 5c2c0233175..90f604bbcd1 100644 --- a/arch/powerpc/include/asm/fixmap.h +++ b/arch/powerpc/include/asm/fixmap.h @@ -58,52 +58,12 @@ enum fixed_addresses { extern void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags); -#define set_fixmap(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL) -/* - * Some hardware wants to get fixmapped without caching. - */ -#define set_fixmap_nocache(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL_NCG) - -#define clear_fixmap(idx) \ - __set_fixmap(idx, 0, __pgprot(0)) - #define __FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) #define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) -#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) -#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) - -extern void __this_fixmap_does_not_exist(void); - -/* - * 'index to address' translation. If anyone tries to use the idx - * directly without tranlation, we catch the bug with a NULL-deference - * kernel oops. Illegal ranges of incoming indices are caught too. - */ -static __always_inline unsigned long fix_to_virt(const unsigned int idx) -{ - /* - * this branch gets completely eliminated after inlining, - * except when someone tries to use fixaddr indices in an - * illegal way. (such as mixing up address types or using - * out-of-range indices). - * - * If it doesn't get removed, the linker will complain - * loudly with a reasonably clear error message.. - */ - if (idx >= __end_of_fixed_addresses) - __this_fixmap_does_not_exist(); - - return __fix_to_virt(idx); -} +#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_NCG -static inline unsigned long virt_to_fix(const unsigned long vaddr) -{ - BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); - return __virt_to_fix(vaddr); -} +#include <asm-generic/fixmap.h> #endif /* !__ASSEMBLY__ */ #endif diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 420b45368fc..067fb0dca54 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -285,7 +285,7 @@ struct fsl_lbc_ctrl { /* device info */ struct device *dev; struct fsl_lbc_regs __iomem *regs; - int irq; + int irq[2]; wait_queue_head_t irq_wait; spinlock_t lock; void *nand; diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h index 3bdcfce2c42..418fb654370 100644 --- a/arch/powerpc/include/asm/hardirq.h +++ b/arch/powerpc/include/asm/hardirq.h @@ -6,7 +6,8 @@ typedef struct { unsigned int __softirq_pending; - unsigned int timer_irqs; + unsigned int timer_irqs_event; + unsigned int timer_irqs_others; unsigned int pmu_irqs; unsigned int mce_exceptions; unsigned int spurious_irqs; diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h index d750336b171..623f2971ce0 100644 --- a/arch/powerpc/include/asm/hugetlb.h +++ b/arch/powerpc/include/asm/hugetlb.h @@ -127,7 +127,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { #ifdef CONFIG_PPC64 - return __pte(pte_update(mm, addr, ptep, ~0UL, 1)); + return __pte(pte_update(mm, addr, ptep, ~0UL, 0, 1)); #else return __pte(pte_update(ptep, ~0UL, 0)); #endif diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 575fbf81fad..97d3869991c 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -191,8 +191,24 @@ DEF_MMIO_OUT_D(out_le32, 32, stw); #endif /* __BIG_ENDIAN */ +/* + * Cache inhibitied accessors for use in real mode, you don't want to use these + * unless you know what you're doing. + * + * NB. These use the cpu byte ordering. + */ +DEF_MMIO_OUT_X(out_rm8, 8, stbcix); +DEF_MMIO_OUT_X(out_rm16, 16, sthcix); +DEF_MMIO_OUT_X(out_rm32, 32, stwcix); +DEF_MMIO_IN_X(in_rm8, 8, lbzcix); +DEF_MMIO_IN_X(in_rm16, 16, lhzcix); +DEF_MMIO_IN_X(in_rm32, 32, lwzcix); + #ifdef __powerpc64__ +DEF_MMIO_OUT_X(out_rm64, 64, stdcix); +DEF_MMIO_IN_X(in_rm64, 64, ldcix); + #ifdef __BIG_ENDIAN__ DEF_MMIO_OUT_D(out_be64, 64, std); DEF_MMIO_IN_D(in_be64, 64, ld); diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h index c34656a8925..42632c7a2a4 100644 --- a/arch/powerpc/include/asm/iommu.h +++ b/arch/powerpc/include/asm/iommu.h @@ -30,22 +30,19 @@ #include <asm/machdep.h> #include <asm/types.h> -#define IOMMU_PAGE_SHIFT 12 -#define IOMMU_PAGE_SIZE (ASM_CONST(1) << IOMMU_PAGE_SHIFT) -#define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) -#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) +#define IOMMU_PAGE_SHIFT_4K 12 +#define IOMMU_PAGE_SIZE_4K (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K) +#define IOMMU_PAGE_MASK_4K (~((1 << IOMMU_PAGE_SHIFT_4K) - 1)) +#define IOMMU_PAGE_ALIGN_4K(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE_4K) + +#define IOMMU_PAGE_SIZE(tblptr) (ASM_CONST(1) << (tblptr)->it_page_shift) +#define IOMMU_PAGE_MASK(tblptr) (~((1 << (tblptr)->it_page_shift) - 1)) +#define IOMMU_PAGE_ALIGN(addr, tblptr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE(tblptr)) /* Boot time flags */ extern int iommu_is_off; extern int iommu_force_on; -/* Pure 2^n version of get_order */ -static __inline__ __attribute_const__ int get_iommu_order(unsigned long size) -{ - return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1; -} - - /* * IOMAP_MAX_ORDER defines the largest contiguous block * of dma space we can get. IOMAP_MAX_ORDER = 13 @@ -76,11 +73,21 @@ struct iommu_table { struct iommu_pool large_pool; struct iommu_pool pools[IOMMU_NR_POOLS]; unsigned long *it_map; /* A simple allocation bitmap for now */ + unsigned long it_page_shift;/* table iommu page size */ #ifdef CONFIG_IOMMU_API struct iommu_group *it_group; #endif + void (*set_bypass)(struct iommu_table *tbl, bool enable); }; +/* Pure 2^n version of get_order */ +static inline __attribute_const__ +int get_iommu_order(unsigned long size, struct iommu_table *tbl) +{ + return __ilog2((size - 1) >> tbl->it_page_shift) + 1; +} + + struct scatterlist; static inline void set_iommu_table_base(struct device *dev, void *base) @@ -101,8 +108,34 @@ extern void iommu_free_table(struct iommu_table *tbl, const char *node_name); */ extern struct iommu_table *iommu_init_table(struct iommu_table * tbl, int nid); +#ifdef CONFIG_IOMMU_API extern void iommu_register_group(struct iommu_table *tbl, int pci_domain_number, unsigned long pe_num); +extern int iommu_add_device(struct device *dev); +extern void iommu_del_device(struct device *dev); +#else +static inline void iommu_register_group(struct iommu_table *tbl, + int pci_domain_number, + unsigned long pe_num) +{ +} + +static inline int iommu_add_device(struct device *dev) +{ + return 0; +} + +static inline void iommu_del_device(struct device *dev) +{ +} +#endif /* !CONFIG_IOMMU_API */ + +static inline void set_iommu_table_base_and_group(struct device *dev, + void *base) +{ + set_iommu_table_base(dev, base); + iommu_add_device(dev); +} extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl, struct scatterlist *sglist, int nelems, diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h index 8337c33c2eb..19eb74a95b5 100644 --- a/arch/powerpc/include/asm/kvm_asm.h +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -74,6 +74,7 @@ #define BOOKE_INTERRUPT_GUEST_DBELL_CRIT 39 #define BOOKE_INTERRUPT_HV_SYSCALL 40 #define BOOKE_INTERRUPT_HV_PRIV 41 +#define BOOKE_INTERRUPT_LRAT_ERROR 42 /* book3s */ diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index 844c28de7ec..d0a2a2f9956 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -132,8 +132,6 @@ struct slb_shadow { } save_area[SLB_NUM_BOLTED]; } ____cacheline_aligned; -extern struct slb_shadow slb_shadow[]; - /* * Layout of entries in the hypervisor's dispatch trace log buffer. */ diff --git a/arch/powerpc/include/asm/mce.h b/arch/powerpc/include/asm/mce.h new file mode 100644 index 00000000000..8e99edf6d96 --- /dev/null +++ b/arch/powerpc/include/asm/mce.h @@ -0,0 +1,197 @@ +/* + * Machine check exception header file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2013 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#ifndef __ASM_PPC64_MCE_H__ +#define __ASM_PPC64_MCE_H__ + +#include <linux/bitops.h> + +/* + * Machine Check bits on power7 and power8 + */ +#define P7_SRR1_MC_LOADSTORE(srr1) ((srr1) & PPC_BIT(42)) /* P8 too */ + +/* SRR1 bits for machine check (On Power7 and Power8) */ +#define P7_SRR1_MC_IFETCH(srr1) ((srr1) & PPC_BITMASK(43, 45)) /* P8 too */ + +#define P7_SRR1_MC_IFETCH_UE (0x1 << PPC_BITLSHIFT(45)) /* P8 too */ +#define P7_SRR1_MC_IFETCH_SLB_PARITY (0x2 << PPC_BITLSHIFT(45)) /* P8 too */ +#define P7_SRR1_MC_IFETCH_SLB_MULTIHIT (0x3 << PPC_BITLSHIFT(45)) /* P8 too */ +#define P7_SRR1_MC_IFETCH_SLB_BOTH (0x4 << PPC_BITLSHIFT(45)) +#define P7_SRR1_MC_IFETCH_TLB_MULTIHIT (0x5 << PPC_BITLSHIFT(45)) /* P8 too */ +#define P7_SRR1_MC_IFETCH_UE_TLB_RELOAD (0x6 << PPC_BITLSHIFT(45)) /* P8 too */ +#define P7_SRR1_MC_IFETCH_UE_IFU_INTERNAL (0x7 << PPC_BITLSHIFT(45)) + +/* SRR1 bits for machine check (On Power8) */ +#define P8_SRR1_MC_IFETCH_ERAT_MULTIHIT (0x4 << PPC_BITLSHIFT(45)) + +/* DSISR bits for machine check (On Power7 and Power8) */ +#define P7_DSISR_MC_UE (PPC_BIT(48)) /* P8 too */ +#define P7_DSISR_MC_UE_TABLEWALK (PPC_BIT(49)) /* P8 too */ +#define P7_DSISR_MC_ERAT_MULTIHIT (PPC_BIT(52)) /* P8 too */ +#define P7_DSISR_MC_TLB_MULTIHIT_MFTLB (PPC_BIT(53)) /* P8 too */ +#define P7_DSISR_MC_SLB_PARITY_MFSLB (PPC_BIT(55)) /* P8 too */ +#define P7_DSISR_MC_SLB_MULTIHIT (PPC_BIT(56)) /* P8 too */ +#define P7_DSISR_MC_SLB_MULTIHIT_PARITY (PPC_BIT(57)) /* P8 too */ + +/* + * DSISR bits for machine check (Power8) in addition to above. + * Secondary DERAT Multihit + */ +#define P8_DSISR_MC_ERAT_MULTIHIT_SEC (PPC_BIT(54)) + +/* SLB error bits */ +#define P7_DSISR_MC_SLB_ERRORS (P7_DSISR_MC_ERAT_MULTIHIT | \ + P7_DSISR_MC_SLB_PARITY_MFSLB | \ + P7_DSISR_MC_SLB_MULTIHIT | \ + P7_DSISR_MC_SLB_MULTIHIT_PARITY) + +#define P8_DSISR_MC_SLB_ERRORS (P7_DSISR_MC_SLB_ERRORS | \ + P8_DSISR_MC_ERAT_MULTIHIT_SEC) +enum MCE_Version { + MCE_V1 = 1, +}; + +enum MCE_Severity { + MCE_SEV_NO_ERROR = 0, + MCE_SEV_WARNING = 1, + MCE_SEV_ERROR_SYNC = 2, + MCE_SEV_FATAL = 3, +}; + +enum MCE_Disposition { + MCE_DISPOSITION_RECOVERED = 0, + MCE_DISPOSITION_NOT_RECOVERED = 1, +}; + +enum MCE_Initiator { + MCE_INITIATOR_UNKNOWN = 0, + MCE_INITIATOR_CPU = 1, +}; + +enum MCE_ErrorType { + MCE_ERROR_TYPE_UNKNOWN = 0, + MCE_ERROR_TYPE_UE = 1, + MCE_ERROR_TYPE_SLB = 2, + MCE_ERROR_TYPE_ERAT = 3, + MCE_ERROR_TYPE_TLB = 4, +}; + +enum MCE_UeErrorType { + MCE_UE_ERROR_INDETERMINATE = 0, + MCE_UE_ERROR_IFETCH = 1, + MCE_UE_ERROR_PAGE_TABLE_WALK_IFETCH = 2, + MCE_UE_ERROR_LOAD_STORE = 3, + MCE_UE_ERROR_PAGE_TABLE_WALK_LOAD_STORE = 4, +}; + +enum MCE_SlbErrorType { + MCE_SLB_ERROR_INDETERMINATE = 0, + MCE_SLB_ERROR_PARITY = 1, + MCE_SLB_ERROR_MULTIHIT = 2, +}; + +enum MCE_EratErrorType { + MCE_ERAT_ERROR_INDETERMINATE = 0, + MCE_ERAT_ERROR_PARITY = 1, + MCE_ERAT_ERROR_MULTIHIT = 2, +}; + +enum MCE_TlbErrorType { + MCE_TLB_ERROR_INDETERMINATE = 0, + MCE_TLB_ERROR_PARITY = 1, + MCE_TLB_ERROR_MULTIHIT = 2, +}; + +struct machine_check_event { + enum MCE_Version version:8; /* 0x00 */ + uint8_t in_use; /* 0x01 */ + enum MCE_Severity severity:8; /* 0x02 */ + enum MCE_Initiator initiator:8; /* 0x03 */ + enum MCE_ErrorType error_type:8; /* 0x04 */ + enum MCE_Disposition disposition:8; /* 0x05 */ + uint8_t reserved_1[2]; /* 0x06 */ + uint64_t gpr3; /* 0x08 */ + uint64_t srr0; /* 0x10 */ + uint64_t srr1; /* 0x18 */ + union { /* 0x20 */ + struct { + enum MCE_UeErrorType ue_error_type:8; + uint8_t effective_address_provided; + uint8_t physical_address_provided; + uint8_t reserved_1[5]; + uint64_t effective_address; + uint64_t physical_address; + uint8_t reserved_2[8]; + } ue_error; + + struct { + enum MCE_SlbErrorType slb_error_type:8; + uint8_t effective_address_provided; + uint8_t reserved_1[6]; + uint64_t effective_address; + uint8_t reserved_2[16]; + } slb_error; + + struct { + enum MCE_EratErrorType erat_error_type:8; + uint8_t effective_address_provided; + uint8_t reserved_1[6]; + uint64_t effective_address; + uint8_t reserved_2[16]; + } erat_error; + + struct { + enum MCE_TlbErrorType tlb_error_type:8; + uint8_t effective_address_provided; + uint8_t reserved_1[6]; + uint64_t effective_address; + uint8_t reserved_2[16]; + } tlb_error; + } u; +}; + +struct mce_error_info { + enum MCE_ErrorType error_type:8; + union { + enum MCE_UeErrorType ue_error_type:8; + enum MCE_SlbErrorType slb_error_type:8; + enum MCE_EratErrorType erat_error_type:8; + enum MCE_TlbErrorType tlb_error_type:8; + } u; + uint8_t reserved[2]; +}; + +#define MAX_MC_EVT 100 + +/* Release flags for get_mce_event() */ +#define MCE_EVENT_RELEASE true +#define MCE_EVENT_DONTRELEASE false + +extern void save_mce_event(struct pt_regs *regs, long handled, + struct mce_error_info *mce_err, uint64_t addr); +extern int get_mce_event(struct machine_check_event *mce, bool release); +extern void release_mce_event(void); +extern void machine_check_queue_event(void); +extern void machine_check_print_event_info(struct machine_check_event *evt); +extern uint64_t get_mce_fault_addr(struct machine_check_event *evt); + +#endif /* __ASM_PPC64_MCE_H__ */ diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 936db360790..89b785d1684 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -286,8 +286,21 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize) extern int mmu_linear_psize; extern int mmu_vmemmap_psize; +struct tlb_core_data { + /* For software way selection, as on Freescale TLB1 */ + u8 esel_next, esel_max, esel_first; + + /* Per-core spinlock for e6500 TLB handlers (no tlbsrx.) */ + u8 lock; +}; + #ifdef CONFIG_PPC64 extern unsigned long linear_map_top; +extern int book3e_htw_mode; + +#define PPC_HTW_NONE 0 +#define PPC_HTW_IBM 1 +#define PPC_HTW_E6500 2 /* * 64-bit booke platforms don't load the tlb in the tlb miss handler code. diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 691fd8aca93..f8d1d6dcf7d 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -180,16 +180,17 @@ static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr) #define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */ #define MMU_PAGE_256K 4 #define MMU_PAGE_1M 5 -#define MMU_PAGE_4M 6 -#define MMU_PAGE_8M 7 -#define MMU_PAGE_16M 8 -#define MMU_PAGE_64M 9 -#define MMU_PAGE_256M 10 -#define MMU_PAGE_1G 11 -#define MMU_PAGE_16G 12 -#define MMU_PAGE_64G 13 - -#define MMU_PAGE_COUNT 14 +#define MMU_PAGE_2M 6 +#define MMU_PAGE_4M 7 +#define MMU_PAGE_8M 8 +#define MMU_PAGE_16M 9 +#define MMU_PAGE_64M 10 +#define MMU_PAGE_256M 11 +#define MMU_PAGE_1G 12 +#define MMU_PAGE_16G 13 +#define MMU_PAGE_64G 14 + +#define MMU_PAGE_COUNT 15 #if defined(CONFIG_PPC_STD_MMU_64) /* 64-bit classic hash table MMU */ diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h index 887d3d6133e..4a69cd1d504 100644 --- a/arch/powerpc/include/asm/mpc5121.h +++ b/arch/powerpc/include/asm/mpc5121.h @@ -37,7 +37,12 @@ struct mpc512x_ccm { u32 cccr; /* CFM Clock Control Register */ u32 dccr; /* DIU Clock Control Register */ u32 mscan_ccr[4]; /* MSCAN Clock Control Registers */ - u8 res[0x98]; /* Reserved */ + u32 out_ccr[4]; /* OUT CLK Configure Registers */ + u32 rsv0[2]; /* Reserved */ + u32 scfr3; /* System Clock Frequency Register 3 */ + u32 rsv1[3]; /* Reserved */ + u32 spll_lock_cnt; /* System PLL Lock Counter */ + u8 res[0x6c]; /* Reserved */ }; /* diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 7bdcf340016..ed82142a325 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -33,6 +33,28 @@ struct opal_takeover_args { u64 rd_loc; /* r11 */ }; +/* + * SG entry + * + * WARNING: The current implementation requires each entry + * to represent a block that is 4k aligned *and* each block + * size except the last one in the list to be as well. + */ +struct opal_sg_entry { + void *data; + long length; +}; + +/* sg list */ +struct opal_sg_list { + unsigned long num_entries; + struct opal_sg_list *next; + struct opal_sg_entry entry[]; +}; + +/* We calculate number of sg entries based on PAGE_SIZE */ +#define SG_ENTRIES_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct opal_sg_entry)) + extern long opal_query_takeover(u64 *hal_size, u64 *hal_align); extern long opal_do_takeover(struct opal_takeover_args *args); @@ -132,6 +154,9 @@ extern int opal_enter_rtas(struct rtas_args *args, #define OPAL_FLASH_VALIDATE 76 #define OPAL_FLASH_MANAGE 77 #define OPAL_FLASH_UPDATE 78 +#define OPAL_GET_MSG 85 +#define OPAL_CHECK_ASYNC_COMPLETION 86 +#define OPAL_SYNC_HOST_REBOOT 87 #ifndef __ASSEMBLY__ @@ -211,7 +236,16 @@ enum OpalPendingState { OPAL_EVENT_ERROR_LOG = 0x40, OPAL_EVENT_EPOW = 0x80, OPAL_EVENT_LED_STATUS = 0x100, - OPAL_EVENT_PCI_ERROR = 0x200 + OPAL_EVENT_PCI_ERROR = 0x200, + OPAL_EVENT_MSG_PENDING = 0x800, +}; + +enum OpalMessageType { + OPAL_MSG_ASYNC_COMP = 0, + OPAL_MSG_MEM_ERR, + OPAL_MSG_EPOW, + OPAL_MSG_SHUTDOWN, + OPAL_MSG_TYPE_MAX, }; /* Machine check related definitions */ @@ -311,12 +345,16 @@ enum OpalMveEnableAction { OPAL_ENABLE_MVE = 1 }; -enum OpalPciResetAndReinitScope { +enum OpalPciResetScope { OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3, OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5, OPAL_PCI_IODA_TABLE_RESET = 6, }; +enum OpalPciReinitScope { + OPAL_REINIT_PCI_DEV = 1000 +}; + enum OpalPciResetState { OPAL_DEASSERT_RESET = 0, OPAL_ASSERT_RESET = 1 @@ -356,6 +394,12 @@ enum OpalLPCAddressType { OPAL_LPC_FW = 2, }; +struct opal_msg { + uint32_t msg_type; + uint32_t reserved; + uint64_t params[8]; +}; + struct opal_machine_check_event { enum OpalMCE_Version version:8; /* 0x00 */ uint8_t in_use; /* 0x01 */ @@ -404,6 +448,58 @@ struct opal_machine_check_event { } u; }; +/* FSP memory errors handling */ +enum OpalMemErr_Version { + OpalMemErr_V1 = 1, +}; + +enum OpalMemErrType { + OPAL_MEM_ERR_TYPE_RESILIENCE = 0, + OPAL_MEM_ERR_TYPE_DYN_DALLOC, + OPAL_MEM_ERR_TYPE_SCRUB, +}; + +/* Memory Reilience error type */ +enum OpalMemErr_ResilErrType { + OPAL_MEM_RESILIENCE_CE = 0, + OPAL_MEM_RESILIENCE_UE, + OPAL_MEM_RESILIENCE_UE_SCRUB, +}; + +/* Dynamic Memory Deallocation type */ +enum OpalMemErr_DynErrType { + OPAL_MEM_DYNAMIC_DEALLOC = 0, +}; + +/* OpalMemoryErrorData->flags */ +#define OPAL_MEM_CORRECTED_ERROR 0x0001 +#define OPAL_MEM_THRESHOLD_EXCEEDED 0x0002 +#define OPAL_MEM_ACK_REQUIRED 0x8000 + +struct OpalMemoryErrorData { + enum OpalMemErr_Version version:8; /* 0x00 */ + enum OpalMemErrType type:8; /* 0x01 */ + uint16_t flags; /* 0x02 */ + uint8_t reserved_1[4]; /* 0x04 */ + + union { + /* Memory Resilience corrected/uncorrected error info */ + struct { + enum OpalMemErr_ResilErrType resil_err_type:8; + uint8_t reserved_1[7]; + uint64_t physical_address_start; + uint64_t physical_address_end; + } resilience; + /* Dynamic memory deallocation error info */ + struct { + enum OpalMemErr_DynErrType dyn_err_type:8; + uint8_t reserved_1[7]; + uint64_t physical_address_start; + uint64_t physical_address_end; + } dyn_dealloc; + } u; +}; + enum { OPAL_P7IOC_DIAG_TYPE_NONE = 0, OPAL_P7IOC_DIAG_TYPE_RGC = 1, @@ -710,7 +806,7 @@ int64_t opal_pci_get_phb_diag_data(uint64_t phb_id, void *diag_buffer, int64_t opal_pci_get_phb_diag_data2(uint64_t phb_id, void *diag_buffer, uint64_t diag_buffer_len); int64_t opal_pci_fence_phb(uint64_t phb_id); -int64_t opal_pci_reinit(uint64_t phb_id, uint8_t reinit_scope); +int64_t opal_pci_reinit(uint64_t phb_id, uint64_t reinit_scope, uint64_t data); int64_t opal_pci_mask_pe_error(uint64_t phb_id, uint16_t pe_number, uint8_t error_type, uint8_t mask_action); int64_t opal_set_slot_led_status(uint64_t phb_id, uint64_t slot_id, uint8_t led_type, uint8_t led_action); int64_t opal_get_epow_status(__be64 *status); @@ -720,8 +816,8 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe, int64_t opal_pci_poll(uint64_t phb_id); int64_t opal_return_cpu(void); -int64_t opal_xscom_read(uint32_t gcid, uint32_t pcb_addr, __be64 *val); -int64_t opal_xscom_write(uint32_t gcid, uint32_t pcb_addr, uint64_t val); +int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val); +int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val); int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type, uint32_t addr, uint32_t data, uint32_t sz); @@ -731,6 +827,10 @@ int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result); int64_t opal_manage_flash(uint8_t op); int64_t opal_update_flash(uint64_t blk_list); +int64_t opal_get_msg(uint64_t buffer, size_t size); +int64_t opal_check_completion(uint64_t buffer, size_t size, uint64_t token); +int64_t opal_sync_host_reboot(void); + /* Internal functions */ extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data); @@ -744,6 +844,8 @@ extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data); extern int opal_notifier_register(struct notifier_block *nb); +extern int opal_message_notifier_register(enum OpalMessageType msg_type, + struct notifier_block *nb); extern void opal_notifier_enable(void); extern void opal_notifier_disable(void); extern void opal_notifier_update_evt(uint64_t evt_mask, uint64_t evt_val); diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index b6ea9e068c1..9c5dbc3833f 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -16,7 +16,6 @@ #ifdef CONFIG_PPC64 -#include <linux/init.h> #include <asm/types.h> #include <asm/lppaca.h> #include <asm/mmu.h> @@ -113,6 +112,10 @@ struct paca_struct { /* Keep pgd in the same cacheline as the start of extlb */ pgd_t *pgd __attribute__((aligned(0x80))); /* Current PGD */ pgd_t *kernel_pgd; /* Kernel PGD */ + + /* Shared by all threads of a core -- points to tcd of first thread */ + struct tlb_core_data *tcd_ptr; + /* We can have up to 3 levels of reentrancy in the TLB miss handler */ u64 extlb[3][EX_TLB_SIZE / sizeof(u64)]; u64 exmc[8]; /* used for machine checks */ @@ -123,6 +126,8 @@ struct paca_struct { void *mc_kstack; void *crit_kstack; void *dbg_kstack; + + struct tlb_core_data tcd; #endif /* CONFIG_PPC_BOOK3E */ mm_context_t context; @@ -152,6 +157,15 @@ struct paca_struct { */ struct opal_machine_check_event *opal_mc_evt; #endif +#ifdef CONFIG_PPC_BOOK3S_64 + /* Exclusive emergency stack pointer for machine check exception. */ + void *mc_emergency_sp; + /* + * Flag to check whether we are in machine check early handler + * and already using emergency stack. + */ + u16 in_mce; +#endif /* Stuff for accurate time accounting */ u64 user_time; /* accumulated usermode TB ticks */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index 4a191c47286..eb9261024f5 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -195,6 +195,7 @@ extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr, static inline unsigned long pte_update(struct mm_struct *mm, unsigned long addr, pte_t *ptep, unsigned long clr, + unsigned long set, int huge) { #ifdef PTE_ATOMIC_UPDATES @@ -205,14 +206,15 @@ static inline unsigned long pte_update(struct mm_struct *mm, andi. %1,%0,%6\n\ bne- 1b \n\ andc %1,%0,%4 \n\ + or %1,%1,%7\n\ stdcx. %1,0,%3 \n\ bne- 1b" : "=&r" (old), "=&r" (tmp), "=m" (*ptep) - : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY) + : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY), "r" (set) : "cc" ); #else unsigned long old = pte_val(*ptep); - *ptep = __pte(old & ~clr); + *ptep = __pte((old & ~clr) | set); #endif /* huge pages use the old page table lock */ if (!huge) @@ -231,9 +233,9 @@ static inline int __ptep_test_and_clear_young(struct mm_struct *mm, { unsigned long old; - if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) + if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) return 0; - old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0); + old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0); return (old & _PAGE_ACCESSED) != 0; } #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG @@ -252,7 +254,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, if ((pte_val(*ptep) & _PAGE_RW) == 0) return; - pte_update(mm, addr, ptep, _PAGE_RW, 0); + pte_update(mm, addr, ptep, _PAGE_RW, 0, 0); } static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, @@ -261,7 +263,7 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, if ((pte_val(*ptep) & _PAGE_RW) == 0) return; - pte_update(mm, addr, ptep, _PAGE_RW, 1); + pte_update(mm, addr, ptep, _PAGE_RW, 0, 1); } /* @@ -284,14 +286,14 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0); + unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0, 0); return __pte(old); } static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t * ptep) { - pte_update(mm, addr, ptep, ~0UL, 0); + pte_update(mm, addr, ptep, ~0UL, 0, 0); } @@ -506,7 +508,9 @@ extern int pmdp_set_access_flags(struct vm_area_struct *vma, extern unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr, - pmd_t *pmdp, unsigned long clr); + pmd_t *pmdp, + unsigned long clr, + unsigned long set); static inline int __pmdp_test_and_clear_young(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp) @@ -515,7 +519,7 @@ static inline int __pmdp_test_and_clear_young(struct mm_struct *mm, if ((pmd_val(*pmdp) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) return 0; - old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED); + old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0); return ((old & _PAGE_ACCESSED) != 0); } @@ -542,7 +546,7 @@ static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr, if ((pmd_val(*pmdp) & _PAGE_RW) == 0) return; - pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW); + pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW, 0); } #define __HAVE_ARCH_PMDP_SPLITTING_FLUSH @@ -558,5 +562,19 @@ extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp); #define __HAVE_ARCH_PMDP_INVALIDATE extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp); + +#define pmd_move_must_withdraw pmd_move_must_withdraw +struct spinlock; +static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl, + struct spinlock *old_pmd_ptl) +{ + /* + * Archs like ppc64 use pgtable to store per pmd + * specific information. So when we switch the pmd, + * we should also withdraw and deposit the pgtable + */ + return true; +} + #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */ diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index b60ceb8d86c..3ebb188c3ff 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -3,6 +3,7 @@ #ifdef __KERNEL__ #ifndef __ASSEMBLY__ +#include <linux/mmdebug.h> #include <asm/processor.h> /* For TASK_SIZE */ #include <asm/mmu.h> #include <asm/page.h> @@ -33,10 +34,95 @@ static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; } -static inline int pte_present(pte_t pte) { return pte_val(pte) & _PAGE_PRESENT; } static inline int pte_none(pte_t pte) { return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; } static inline pgprot_t pte_pgprot(pte_t pte) { return __pgprot(pte_val(pte) & PAGE_PROT_BITS); } +#ifdef CONFIG_NUMA_BALANCING + +static inline int pte_present(pte_t pte) +{ + return pte_val(pte) & (_PAGE_PRESENT | _PAGE_NUMA); +} + +#define pte_numa pte_numa +static inline int pte_numa(pte_t pte) +{ + return (pte_val(pte) & + (_PAGE_NUMA|_PAGE_PRESENT)) == _PAGE_NUMA; +} + +#define pte_mknonnuma pte_mknonnuma +static inline pte_t pte_mknonnuma(pte_t pte) +{ + pte_val(pte) &= ~_PAGE_NUMA; + pte_val(pte) |= _PAGE_PRESENT | _PAGE_ACCESSED; + return pte; +} + +#define pte_mknuma pte_mknuma +static inline pte_t pte_mknuma(pte_t pte) +{ + /* + * We should not set _PAGE_NUMA on non present ptes. Also clear the + * present bit so that hash_page will return 1 and we collect this + * as numa fault. + */ + if (pte_present(pte)) { + pte_val(pte) |= _PAGE_NUMA; + pte_val(pte) &= ~_PAGE_PRESENT; + } else + VM_BUG_ON(1); + return pte; +} + +#define ptep_set_numa ptep_set_numa +static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + if ((pte_val(*ptep) & _PAGE_PRESENT) == 0) + VM_BUG_ON(1); + + pte_update(mm, addr, ptep, _PAGE_PRESENT, _PAGE_NUMA, 0); + return; +} + +#define pmd_numa pmd_numa +static inline int pmd_numa(pmd_t pmd) +{ + return pte_numa(pmd_pte(pmd)); +} + +#define pmdp_set_numa pmdp_set_numa +static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp) +{ + if ((pmd_val(*pmdp) & _PAGE_PRESENT) == 0) + VM_BUG_ON(1); + + pmd_hugepage_update(mm, addr, pmdp, _PAGE_PRESENT, _PAGE_NUMA); + return; +} + +#define pmd_mknonnuma pmd_mknonnuma +static inline pmd_t pmd_mknonnuma(pmd_t pmd) +{ + return pte_pmd(pte_mknonnuma(pmd_pte(pmd))); +} + +#define pmd_mknuma pmd_mknuma +static inline pmd_t pmd_mknuma(pmd_t pmd) +{ + return pte_pmd(pte_mknuma(pmd_pte(pmd))); +} + +# else + +static inline int pte_present(pte_t pte) +{ + return pte_val(pte) & _PAGE_PRESENT; +} +#endif /* CONFIG_NUMA_BALANCING */ + /* Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. * diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index f595b98079e..6586a40a46c 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -4,7 +4,6 @@ #ifndef _ASM_POWERPC_PPC_ASM_H #define _ASM_POWERPC_PPC_ASM_H -#include <linux/init.h> #include <linux/stringify.h> #include <asm/asm-compat.h> #include <asm/processor.h> @@ -295,6 +294,11 @@ n: * you want to access various offsets within it). On ppc32 this is * identical to LOAD_REG_IMMEDIATE. * + * LOAD_REG_ADDR_PIC(rn, name) + * Loads the address of label 'name' into register 'run'. Use this when + * the kernel doesn't run at the linked or relocated address. Please + * note that this macro will clobber the lr register. + * * LOAD_REG_ADDRBASE(rn, name) * ADDROFF(name) * LOAD_REG_ADDRBASE loads part of the address of label 'name' into @@ -305,6 +309,14 @@ n: * LOAD_REG_ADDRBASE(rX, name) * ld rY,ADDROFF(name)(rX) */ + +/* Be careful, this will clobber the lr register. */ +#define LOAD_REG_ADDR_PIC(reg, name) \ + bl 0f; \ +0: mflr reg; \ + addis reg,reg,(name - 0b)@ha; \ + addi reg,reg,(name - 0b)@l; + #ifdef __powerpc64__ #define LOAD_REG_IMMEDIATE(reg,expr) \ lis reg,(expr)@highest; \ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index fc14a38c7cc..b62de43ae5f 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -256,6 +256,8 @@ struct thread_struct { unsigned long evr[32]; /* upper 32-bits of SPE regs */ u64 acc; /* Accumulator */ unsigned long spefscr; /* SPE & eFP status */ + unsigned long spefscr_last; /* SPEFSCR value on last prctl + call or trap return */ int used_spe; /* set if process has used spe */ #endif /* CONFIG_SPE */ #ifdef CONFIG_PPC_TRANSACTIONAL_MEM @@ -317,7 +319,9 @@ struct thread_struct { (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack) #ifdef CONFIG_SPE -#define SPEFSCR_INIT .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, +#define SPEFSCR_INIT \ + .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, \ + .spefscr_last = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, #else #define SPEFSCR_INIT #endif @@ -373,6 +377,8 @@ extern int set_endian(struct task_struct *tsk, unsigned int val); extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr); extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val); +extern void fp_enable(void); +extern void vec_enable(void); extern void load_fp_state(struct thread_fp_state *fp); extern void store_fp_state(struct thread_fp_state *fp); extern void load_vr_state(struct thread_vr_state *vr); @@ -444,13 +450,6 @@ enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; extern int powersave_nap; /* set if nap mode can be used in idle loop */ extern void power7_nap(void); - -#ifdef CONFIG_PSERIES_IDLE -extern void update_smt_snooze_delay(int cpu, int residency); -#else -static inline void update_smt_snooze_delay(int cpu, int residency) {} -#endif - extern void flush_instruction_cache(void); extern void hard_reset_now(void); extern void poweroff_now(void); diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h index 678a7c1d9cb..a1bc7e75842 100644 --- a/arch/powerpc/include/asm/ps3.h +++ b/arch/powerpc/include/asm/ps3.h @@ -21,7 +21,6 @@ #if !defined(_ASM_POWERPC_PS3_H) #define _ASM_POWERPC_PS3_H -#include <linux/init.h> #include <linux/types.h> #include <linux/device.h> #include <asm/cell-pmu.h> diff --git a/arch/powerpc/include/asm/pte-hash64.h b/arch/powerpc/include/asm/pte-hash64.h index 0419eeb5327..2505d8eab15 100644 --- a/arch/powerpc/include/asm/pte-hash64.h +++ b/arch/powerpc/include/asm/pte-hash64.h @@ -19,7 +19,7 @@ #define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */ #define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */ #define _PAGE_GUARDED 0x0008 -#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */ +/* We can derive Memory coherence from _PAGE_NO_CACHE */ #define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */ #define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */ #define _PAGE_DIRTY 0x0080 /* C: page changed */ @@ -27,6 +27,12 @@ #define _PAGE_RW 0x0200 /* software: user write access allowed */ #define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */ +/* + * Used for tracking numa faults + */ +#define _PAGE_NUMA 0x00000010 /* Gather numa placement stats */ + + /* No separate kernel read-only */ #define _PAGE_KERNEL_RW (_PAGE_RW | _PAGE_DIRTY) /* user access blocked by key */ #define _PAGE_KERNEL_RO _PAGE_KERNEL_RW diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index becc08e6a65..279b80f3bb2 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -28,11 +28,23 @@ #ifdef __powerpc64__ +/* + * Size of redzone that userspace is allowed to use below the stack + * pointer. This is 288 in the 64-bit big-endian ELF ABI, and 512 in + * the new ELFv2 little-endian ABI, so we allow the larger amount. + * + * For kernel code we allow a 288-byte redzone, in order to conserve + * kernel stack space; gcc currently only uses 288 bytes, and will + * hopefully allow explicit control of the redzone size in future. + */ +#define USER_REDZONE_SIZE 512 +#define KERNEL_REDZONE_SIZE 288 + #define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ #define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ #define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) #define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ - STACK_FRAME_OVERHEAD + 288) + STACK_FRAME_OVERHEAD + KERNEL_REDZONE_SIZE) #define STACK_FRAME_MARKER 12 /* Size of dummy stack frame allocated when calling signal handler. */ @@ -41,6 +53,8 @@ #else /* __powerpc64__ */ +#define USER_REDZONE_SIZE 0 +#define KERNEL_REDZONE_SIZE 0 #define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ #define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ #define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 6ba8d4af399..90c06ec6eff 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1102,6 +1102,8 @@ #define PVR_8560 0x80200000 #define PVR_VER_E500V1 0x8020 #define PVR_VER_E500V2 0x8021 +#define PVR_VER_E6500 0x8040 + /* * For the 8xx processors, all of them report the same PVR family for * the PowerPC core. The various versions of these processors must be diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 2e31aacd8ac..163c3b05a76 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -101,6 +101,7 @@ #define SPRN_IVOR39 0x1B1 /* Interrupt Vector Offset Register 39 */ #define SPRN_IVOR40 0x1B2 /* Interrupt Vector Offset Register 40 */ #define SPRN_IVOR41 0x1B3 /* Interrupt Vector Offset Register 41 */ +#define SPRN_IVOR42 0x1B4 /* Interrupt Vector Offset Register 42 */ #define SPRN_GIVOR2 0x1B8 /* Guest IVOR2 */ #define SPRN_GIVOR3 0x1B9 /* Guest IVOR3 */ #define SPRN_GIVOR4 0x1BA /* Guest IVOR4 */ @@ -170,6 +171,7 @@ #define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ #define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ #define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ +#define SPRN_PWRMGTCR0 0x3FB /* Power management control register 0 */ #define SPRN_SVR 0x3FF /* System Version Register */ /* @@ -216,6 +218,14 @@ #define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ #define CCR1_TCS 0x00000080 /* Timer Clock Select */ +/* Bit definitions for PWRMGTCR0. */ +#define PWRMGTCR0_PW20_WAIT (1 << 14) /* PW20 state enable bit */ +#define PWRMGTCR0_PW20_ENT_SHIFT 8 +#define PWRMGTCR0_PW20_ENT 0x3F00 +#define PWRMGTCR0_AV_IDLE_PD_EN (1 << 22) /* Altivec idle enable */ +#define PWRMGTCR0_AV_IDLE_CNT_SHIFT 16 +#define PWRMGTCR0_AV_IDLE_CNT 0x3F0000 + /* Bit definitions for the MCSR. */ #define MCSR_MCS 0x80000000 /* Machine Check Summary */ #define MCSR_IB 0x40000000 /* Instruction PLB Error */ diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 4ee06fe15de..d0e784e0ff4 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -8,6 +8,7 @@ #ifdef __powerpc64__ +extern char __start_interrupts[]; extern char __end_interrupts[]; extern char __prom_init_toc_start[]; @@ -21,6 +22,17 @@ static inline int in_kernel_text(unsigned long addr) return 0; } +static inline int overlaps_interrupt_vector_text(unsigned long start, + unsigned long end) +{ + unsigned long real_start, real_end; + real_start = __start_interrupts - _stext; + real_end = __end_interrupts - _stext; + + return start < (unsigned long)__va(real_end) && + (unsigned long)__va(real_start) < end; +} + static inline int overlaps_kernel_text(unsigned long start, unsigned long end) { return start < (unsigned long)__init_end && diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h index f6e78d63fb6..35aa339410b 100644 --- a/arch/powerpc/include/asm/spinlock.h +++ b/arch/powerpc/include/asm/spinlock.h @@ -30,8 +30,6 @@ #define smp_mb__after_unlock_lock() smp_mb() /* Full ordering for lock. */ -#define arch_spin_is_locked(x) ((x)->slock != 0) - #ifdef CONFIG_PPC64 /* use 0x800000yy when locked, where yy == CPU number */ #ifdef __BIG_ENDIAN__ @@ -56,6 +54,16 @@ #define SYNC_IO #endif +static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock) +{ + return lock.slock == 0; +} + +static inline int arch_spin_is_locked(arch_spinlock_t *lock) +{ + return !arch_spin_value_unlocked(*lock); +} + /* * This returns the old value in the lock, so we succeeded * in getting the lock if the return value is 0. diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 43523fe0d8b..3ddf7027670 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -359,3 +359,5 @@ COMPAT_SYS(process_vm_readv) COMPAT_SYS(process_vm_writev) SYSCALL(finit_module) SYSCALL(ni_syscall) /* sys_kcmp */ +SYSCALL_SPU(sched_setattr) +SYSCALL_SPU(sched_getattr) diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 9854c564ac5..b034ecdb7c7 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -91,8 +91,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_32BIT 4 /* 32 bit binary */ -#define TIF_PERFMON_WORK 5 /* work for pfm_handle_work() */ -#define TIF_PERFMON_CTXSW 6 /* perfmon needs ctxsw calls */ +#define TIF_RESTORE_TM 5 /* need to restore TM FP/VEC/VSX */ #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SINGLESTEP 8 /* singlestepping active */ #define TIF_NOHZ 9 /* in adaptive nohz mode */ @@ -115,8 +114,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) #define _TIF_32BIT (1<<TIF_32BIT) -#define _TIF_PERFMON_WORK (1<<TIF_PERFMON_WORK) -#define _TIF_PERFMON_CTXSW (1<<TIF_PERFMON_CTXSW) +#define _TIF_RESTORE_TM (1<<TIF_RESTORE_TM) #define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) #define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) #define _TIF_SECCOMP (1<<TIF_SECCOMP) @@ -132,7 +130,8 @@ static inline struct thread_info *current_thread_info(void) _TIF_NOHZ) #define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \ - _TIF_NOTIFY_RESUME | _TIF_UPROBE) + _TIF_NOTIFY_RESUME | _TIF_UPROBE | \ + _TIF_RESTORE_TM) #define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR) /* Bits in local_flags */ diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h index 9dfbc34bdbf..0c9f8b74dd9 100644 --- a/arch/powerpc/include/asm/tm.h +++ b/arch/powerpc/include/asm/tm.h @@ -15,6 +15,7 @@ extern void do_load_up_transact_altivec(struct thread_struct *thread); extern void tm_enable(void); extern void tm_reclaim(struct thread_struct *thread, unsigned long orig_msr, uint8_t cause); +extern void tm_reclaim_current(uint8_t cause); extern void tm_recheckpoint(struct thread_struct *thread, unsigned long orig_msr); extern void tm_abort(uint8_t cause); diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 89e3ef2496a..d0b5fca6b07 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -22,7 +22,15 @@ struct device_node; static inline int cpu_to_node(int cpu) { - return numa_cpu_lookup_table[cpu]; + int nid; + + nid = numa_cpu_lookup_table[cpu]; + + /* + * During early boot, the numa-cpu lookup table might not have been + * setup for all CPUs yet. In such cases, default to node 0. + */ + return (nid < 0) ? 0 : nid; } #define parent_node(node) (node) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 3ca819f541b..4494f029b63 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -12,7 +12,7 @@ #include <uapi/asm/unistd.h> -#define __NR_syscalls 355 +#define __NR_syscalls 357 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h index 0d9cecddf8a..c53f5f6d176 100644 --- a/arch/powerpc/include/asm/vdso.h +++ b/arch/powerpc/include/asm/vdso.h @@ -4,11 +4,11 @@ #ifdef __KERNEL__ /* Default link addresses for the vDSOs */ -#define VDSO32_LBASE 0x100000 -#define VDSO64_LBASE 0x100000 +#define VDSO32_LBASE 0x0 +#define VDSO64_LBASE 0x0 /* Default map addresses for 32bit vDSO */ -#define VDSO32_MBASE VDSO32_LBASE +#define VDSO32_MBASE 0x100000 #define VDSO_VERSION_STRING LINUX_2.6.15 diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h index 68d0cc998b1..4f9b7ca0710 100644 --- a/arch/powerpc/include/asm/vio.h +++ b/arch/powerpc/include/asm/vio.h @@ -15,7 +15,6 @@ #define _ASM_POWERPC_VIO_H #ifdef __KERNEL__ -#include <linux/init.h> #include <linux/errno.h> #include <linux/device.h> #include <linux/dma-mapping.h> diff --git a/arch/powerpc/include/uapi/asm/socket.h b/arch/powerpc/include/uapi/asm/socket.h index fa698324a1f..a9c3e2e18c0 100644 --- a/arch/powerpc/include/uapi/asm/socket.h +++ b/arch/powerpc/include/uapi/asm/socket.h @@ -85,4 +85,6 @@ #define SO_MAX_PACING_RATE 47 +#define SO_BPF_EXTENSIONS 48 + #endif /* _ASM_POWERPC_SOCKET_H */ diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h index 74cb4d72d67..881bf2e2560 100644 --- a/arch/powerpc/include/uapi/asm/unistd.h +++ b/arch/powerpc/include/uapi/asm/unistd.h @@ -377,6 +377,7 @@ #define __NR_process_vm_writev 352 #define __NR_finit_module 353 #define __NR_kcmp 354 - +#define __NR_sched_setattr 355 +#define __NR_sched_getattr 356 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 445cb6e39d5..fcc9a89a469 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o +obj-$(CONFIG_PPC_BOOK3S_64) += mce.o mce_power.o obj64-$(CONFIG_RELOCATABLE) += reloc_64.o obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o @@ -47,7 +48,6 @@ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o obj-$(CONFIG_PPC_P7_NAP) += idle_power7.o obj-$(CONFIG_PPC_OF) += of_platform.o prom_parse.o -obj-$(CONFIG_PPC_CLOCK) += clock.o procfs-y := proc_powerpc.o obj-$(CONFIG_PROC_FS) += $(procfs-y) rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 29eb7c19ee3..b5aacf72ae6 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -203,6 +203,15 @@ int main(void) DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack)); DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack)); DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack)); + DEFINE(PACA_TCD_PTR, offsetof(struct paca_struct, tcd_ptr)); + + DEFINE(TCD_ESEL_NEXT, + offsetof(struct tlb_core_data, esel_next)); + DEFINE(TCD_ESEL_MAX, + offsetof(struct tlb_core_data, esel_max)); + DEFINE(TCD_ESEL_FIRST, + offsetof(struct tlb_core_data, esel_first)); + DEFINE(TCD_LOCK, offsetof(struct tlb_core_data, lock)); #endif /* CONFIG_PPC_BOOK3E */ #ifdef CONFIG_PPC_STD_MMU_64 @@ -232,6 +241,10 @@ int main(void) DEFINE(PACA_DTL_RIDX, offsetof(struct paca_struct, dtl_ridx)); #endif /* CONFIG_PPC_STD_MMU_64 */ DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp)); +#ifdef CONFIG_PPC_BOOK3S_64 + DEFINE(PACAMCEMERGSP, offsetof(struct paca_struct, mc_emergency_sp)); + DEFINE(PACA_IN_MCE, offsetof(struct paca_struct, in_mce)); +#endif DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state)); DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime)); diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c index 65493272787..2912b8787aa 100644 --- a/arch/powerpc/kernel/cacheinfo.c +++ b/arch/powerpc/kernel/cacheinfo.c @@ -12,7 +12,6 @@ #include <linux/cpu.h> #include <linux/cpumask.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/kobject.h> #include <linux/list.h> @@ -794,6 +793,9 @@ static void remove_cache_dir(struct cache_dir *cache_dir) { remove_index_dirs(cache_dir); + /* Remove cache dir from sysfs */ + kobject_del(cache_dir->kobj); + kobject_put(cache_dir->kobj); kfree(cache_dir); diff --git a/arch/powerpc/kernel/clock.c b/arch/powerpc/kernel/clock.c deleted file mode 100644 index a764b47791e..00000000000 --- a/arch/powerpc/kernel/clock.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Dummy clk implementations for powerpc. - * These need to be overridden in platform code. - */ - -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/export.h> -#include <asm/clk_interface.h> - -struct clk_interface clk_functions; - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (clk_functions.clk_get) - return clk_functions.clk_get(dev, id); - return ERR_PTR(-ENOSYS); -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ - if (clk_functions.clk_put) - clk_functions.clk_put(clk); -} -EXPORT_SYMBOL(clk_put); - -int clk_enable(struct clk *clk) -{ - if (clk_functions.clk_enable) - return clk_functions.clk_enable(clk); - return -ENOSYS; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - if (clk_functions.clk_disable) - clk_functions.clk_disable(clk); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (clk_functions.clk_get_rate) - return clk_functions.clk_get_rate(clk); - return 0; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk_functions.clk_round_rate) - return clk_functions.clk_round_rate(clk, rate); - return -ENOSYS; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - if (clk_functions.clk_set_rate) - return clk_functions.clk_set_rate(clk, rate); - return -ENOSYS; -} -EXPORT_SYMBOL(clk_set_rate); - -struct clk *clk_get_parent(struct clk *clk) -{ - if (clk_functions.clk_get_parent) - return clk_functions.clk_get_parent(clk); - return ERR_PTR(-ENOSYS); -} -EXPORT_SYMBOL(clk_get_parent); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - if (clk_functions.clk_set_parent) - return clk_functions.clk_set_parent(clk, parent); - return -ENOSYS; -} -EXPORT_SYMBOL(clk_set_parent); diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index bfb18c7290b..cc2d8962e09 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -53,11 +53,57 @@ _GLOBAL(__e500_dcache_setup) isync blr +/* + * FIXME - we haven't yet done testing to determine a reasonable default + * value for PW20_WAIT_IDLE_BIT. + */ +#define PW20_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */ +_GLOBAL(setup_pw20_idle) + mfspr r3, SPRN_PWRMGTCR0 + + /* Set PW20_WAIT bit, enable pw20 state*/ + ori r3, r3, PWRMGTCR0_PW20_WAIT + li r11, PW20_WAIT_IDLE_BIT + + /* Set Automatic PW20 Core Idle Count */ + rlwimi r3, r11, PWRMGTCR0_PW20_ENT_SHIFT, PWRMGTCR0_PW20_ENT + + mtspr SPRN_PWRMGTCR0, r3 + + blr + +/* + * FIXME - we haven't yet done testing to determine a reasonable default + * value for AV_WAIT_IDLE_BIT. + */ +#define AV_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */ +_GLOBAL(setup_altivec_idle) + mfspr r3, SPRN_PWRMGTCR0 + + /* Enable Altivec Idle */ + oris r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h + li r11, AV_WAIT_IDLE_BIT + + /* Set Automatic AltiVec Idle Count */ + rlwimi r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT + + mtspr SPRN_PWRMGTCR0, r3 + + blr + _GLOBAL(__setup_cpu_e6500) mflr r6 #ifdef CONFIG_PPC64 bl .setup_altivec_ivors + /* Touch IVOR42 only if the CPU supports E.HV category */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beq 1f + bl .setup_lrat_ivor +1: #endif + bl setup_pw20_idle + bl setup_altivec_idle bl __setup_cpu_e5500 mtlr r6 blr @@ -119,6 +165,14 @@ _GLOBAL(__setup_cpu_e5500) _GLOBAL(__restore_cpu_e6500) mflr r5 bl .setup_altivec_ivors + /* Touch IVOR42 only if the CPU supports E.HV category */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beq 1f + bl .setup_lrat_ivor +1: + bl .setup_pw20_idle + bl .setup_altivec_idle bl __restore_cpu_e5500 mtlr r5 blr diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S index 18b5b9cf8e3..37d1bb002aa 100644 --- a/arch/powerpc/kernel/cpu_setup_power.S +++ b/arch/powerpc/kernel/cpu_setup_power.S @@ -29,7 +29,7 @@ _GLOBAL(__setup_cpu_power7) mtspr SPRN_LPID,r0 mfspr r3,SPRN_LPCR bl __init_LPCR - bl __init_TLB + bl __init_tlb_power7 mtlr r11 blr @@ -42,7 +42,7 @@ _GLOBAL(__restore_cpu_power7) mtspr SPRN_LPID,r0 mfspr r3,SPRN_LPCR bl __init_LPCR - bl __init_TLB + bl __init_tlb_power7 mtlr r11 blr @@ -59,7 +59,7 @@ _GLOBAL(__setup_cpu_power8) oris r3, r3, LPCR_AIL_3@h bl __init_LPCR bl __init_HFSCR - bl __init_TLB + bl __init_tlb_power8 bl __init_PMU_HV mtlr r11 blr @@ -78,7 +78,7 @@ _GLOBAL(__restore_cpu_power8) oris r3, r3, LPCR_AIL_3@h bl __init_LPCR bl __init_HFSCR - bl __init_TLB + bl __init_tlb_power8 bl __init_PMU_HV mtlr r11 blr @@ -134,15 +134,31 @@ __init_HFSCR: mtspr SPRN_HFSCR,r3 blr -__init_TLB: - /* - * Clear the TLB using the "IS 3" form of tlbiel instruction - * (invalidate by congruence class). P7 has 128 CCs, P8 has 512 - * so we just always do 512 - */ +/* + * Clear the TLB using the specified IS form of tlbiel instruction + * (invalidate by congruence class). P7 has 128 CCs., P8 has 512. + * + * r3 = IS field + */ +__init_tlb_power7: + li r3,0xc00 /* IS field = 0b11 */ +_GLOBAL(__flush_tlb_power7) + li r6,128 + mtctr r6 + mr r7,r3 /* IS field */ + ptesync +2: tlbiel r7 + addi r7,r7,0x1000 + bdnz 2b + ptesync +1: blr + +__init_tlb_power8: + li r3,0xc00 /* IS field = 0b11 */ +_GLOBAL(__flush_tlb_power8) li r6,512 mtctr r6 - li r7,0xc00 /* IS field = 0b11 */ + mr r7,r3 /* IS field */ ptesync 2: tlbiel r7 addi r7,r7,0x1000 diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 597d954e586..6c8dd5da4de 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -71,6 +71,10 @@ extern void __restore_cpu_power7(void); extern void __setup_cpu_power8(unsigned long offset, struct cpu_spec* spec); extern void __restore_cpu_power8(void); extern void __restore_cpu_a2(void); +extern void __flush_tlb_power7(unsigned long inval_selector); +extern void __flush_tlb_power8(unsigned long inval_selector); +extern long __machine_check_early_realmode_p7(struct pt_regs *regs); +extern long __machine_check_early_realmode_p8(struct pt_regs *regs); #endif /* CONFIG_PPC64 */ #if defined(CONFIG_E500) extern void __setup_cpu_e5500(unsigned long offset, struct cpu_spec* spec); @@ -440,6 +444,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_cpu_type = "ppc64/ibm-compat-v1", .cpu_setup = __setup_cpu_power7, .cpu_restore = __restore_cpu_power7, + .flush_tlb = __flush_tlb_power7, + .machine_check_early = __machine_check_early_realmode_p7, .platform = "power7", }, { /* 2.07-compliant processor, i.e. Power8 "architected" mode */ @@ -456,6 +462,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_cpu_type = "ppc64/ibm-compat-v1", .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, + .flush_tlb = __flush_tlb_power8, + .machine_check_early = __machine_check_early_realmode_p8, .platform = "power8", }, { /* Power7 */ @@ -474,6 +482,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_type = PPC_OPROFILE_POWER4, .cpu_setup = __setup_cpu_power7, .cpu_restore = __restore_cpu_power7, + .flush_tlb = __flush_tlb_power7, + .machine_check_early = __machine_check_early_realmode_p7, .platform = "power7", }, { /* Power7+ */ @@ -492,6 +502,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_type = PPC_OPROFILE_POWER4, .cpu_setup = __setup_cpu_power7, .cpu_restore = __restore_cpu_power7, + .flush_tlb = __flush_tlb_power7, + .machine_check_early = __machine_check_early_realmode_p7, .platform = "power7+", }, { /* Power8E */ @@ -510,6 +522,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_type = PPC_OPROFILE_INVALID, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, + .flush_tlb = __flush_tlb_power8, + .machine_check_early = __machine_check_early_realmode_p8, .platform = "power8", }, { /* Power8 */ @@ -528,6 +542,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_type = PPC_OPROFILE_INVALID, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, + .flush_tlb = __flush_tlb_power8, + .machine_check_early = __machine_check_early_realmode_p8, .platform = "power8", }, { /* Cell Broadband Engine */ diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index fdcd8f551af..18d7c80ddeb 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -17,7 +17,6 @@ #include <linux/export.h> #include <linux/crash_dump.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/irq.h> #include <linux/types.h> diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 11c1d069d92..7a13f378ca2 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -98,17 +98,19 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, size_t csize, unsigned long offset, int userbuf) { void *vaddr; + phys_addr_t paddr; if (!csize) return 0; csize = min_t(size_t, csize, PAGE_SIZE); + paddr = pfn << PAGE_SHIFT; - if ((min_low_pfn < pfn) && (pfn < max_pfn)) { - vaddr = __va(pfn << PAGE_SHIFT); + if (memblock_is_region_memory(paddr, csize)) { + vaddr = __va(paddr); csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf); } else { - vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0); + vaddr = __ioremap(paddr, PAGE_SIZE, 0); csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf); iounmap(vaddr); } diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index e4897523de4..54d0116256f 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -83,10 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 0; } - if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) { + if (tbl->it_offset > (mask >> tbl->it_page_shift)) { dev_info(dev, "Warning: IOMMU offset too big for device mask\n"); dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n", - mask, tbl->it_offset << IOMMU_PAGE_SHIFT); + mask, tbl->it_offset << tbl->it_page_shift); return 0; } else return 1; diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 8032b97ccdc..ee78f6e49d6 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -191,12 +191,10 @@ EXPORT_SYMBOL(dma_direct_ops); #define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) -int dma_set_mask(struct device *dev, u64 dma_mask) +int __dma_set_mask(struct device *dev, u64 dma_mask) { struct dma_map_ops *dma_ops = get_dma_ops(dev); - if (ppc_md.dma_set_mask) - return ppc_md.dma_set_mask(dev, dma_mask); if ((dma_ops != NULL) && (dma_ops->set_dma_mask != NULL)) return dma_ops->set_dma_mask(dev, dma_mask); if (!dev->dma_mask || !dma_supported(dev, dma_mask)) @@ -204,6 +202,12 @@ int dma_set_mask(struct device *dev, u64 dma_mask) *dev->dma_mask = dma_mask; return 0; } +int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (ppc_md.dma_set_mask) + return ppc_md.dma_set_mask(dev, dma_mask); + return __dma_set_mask(dev, dma_mask); +} EXPORT_SYMBOL(dma_set_mask); u64 dma_get_required_mask(struct device *dev) diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 4bd687d5e7a..e7b76a6bf15 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -28,6 +28,7 @@ #include <linux/pci.h> #include <linux/proc_fs.h> #include <linux/rbtree.h> +#include <linux/reboot.h> #include <linux/seq_file.h> #include <linux/spinlock.h> #include <linux/export.h> @@ -84,12 +85,12 @@ #define EEH_MAX_FAILS 2100000 /* Time to wait for a PCI slot to report status, in milliseconds */ -#define PCI_BUS_RESET_WAIT_MSEC (60*1000) +#define PCI_BUS_RESET_WAIT_MSEC (5*60*1000) /* Platform dependent EEH operations */ struct eeh_ops *eeh_ops = NULL; -int eeh_subsystem_enabled; +bool eeh_subsystem_enabled = false; EXPORT_SYMBOL(eeh_subsystem_enabled); /* @@ -364,7 +365,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev) eeh_stats.total_mmio_ffs++; - if (!eeh_subsystem_enabled) + if (!eeh_enabled()) return 0; if (!edev) { @@ -747,6 +748,17 @@ int __exit eeh_ops_unregister(const char *name) return -EEXIST; } +static int eeh_reboot_notifier(struct notifier_block *nb, + unsigned long action, void *unused) +{ + eeh_set_enable(false); + return NOTIFY_DONE; +} + +static struct notifier_block eeh_reboot_nb = { + .notifier_call = eeh_reboot_notifier, +}; + /** * eeh_init - EEH initialization * @@ -778,6 +790,14 @@ int eeh_init(void) if (machine_is(powernv) && cnt++ <= 0) return ret; + /* Register reboot notifier */ + ret = register_reboot_notifier(&eeh_reboot_nb); + if (ret) { + pr_warn("%s: Failed to register notifier (%d)\n", + __func__, ret); + return ret; + } + /* call platform initialization function */ if (!eeh_ops) { pr_warning("%s: Platform EEH operation not found\n", @@ -822,7 +842,7 @@ int eeh_init(void) return ret; } - if (eeh_subsystem_enabled) + if (eeh_enabled()) pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n"); else pr_warning("EEH: No capable adapters found\n"); @@ -897,7 +917,7 @@ void eeh_add_device_late(struct pci_dev *dev) struct device_node *dn; struct eeh_dev *edev; - if (!dev || !eeh_subsystem_enabled) + if (!dev || !eeh_enabled()) return; pr_debug("EEH: Adding device %s\n", pci_name(dev)); @@ -921,6 +941,13 @@ void eeh_add_device_late(struct pci_dev *dev) eeh_sysfs_remove_device(edev->pdev); edev->mode &= ~EEH_DEV_SYSFS; + /* + * We definitely should have the PCI device removed + * though it wasn't correctly. So we needn't call + * into error handler afterwards. + */ + edev->mode |= EEH_DEV_NO_HANDLER; + edev->pdev = NULL; dev->dev.archdata.edev = NULL; } @@ -998,7 +1025,7 @@ void eeh_remove_device(struct pci_dev *dev) { struct eeh_dev *edev; - if (!dev || !eeh_subsystem_enabled) + if (!dev || !eeh_enabled()) return; edev = pci_dev_to_eeh_dev(dev); @@ -1023,6 +1050,14 @@ void eeh_remove_device(struct pci_dev *dev) else edev->mode |= EEH_DEV_DISCONNECTED; + /* + * We're removing from the PCI subsystem, that means + * the PCI device driver can't support EEH or not + * well. So we rely on hotplug completely to do recovery + * for the specific PCI device. + */ + edev->mode |= EEH_DEV_NO_HANDLER; + eeh_addr_cache_rmv_dev(dev); eeh_sysfs_remove_device(dev); edev->mode &= ~EEH_DEV_SYSFS; @@ -1030,7 +1065,7 @@ void eeh_remove_device(struct pci_dev *dev) static int proc_eeh_show(struct seq_file *m, void *v) { - if (0 == eeh_subsystem_enabled) { + if (!eeh_enabled()) { seq_printf(m, "EEH Subsystem is globally disabled\n"); seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs); } else { diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index c17f90d0f73..fdc679d309e 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -217,7 +217,8 @@ static void *eeh_report_mmio_enabled(void *data, void *userdata) if (!driver) return NULL; if (!driver->err_handler || - !driver->err_handler->mmio_enabled) { + !driver->err_handler->mmio_enabled || + (edev->mode & EEH_DEV_NO_HANDLER)) { eeh_pcid_put(dev); return NULL; } @@ -258,7 +259,8 @@ static void *eeh_report_reset(void *data, void *userdata) eeh_enable_irq(dev); if (!driver->err_handler || - !driver->err_handler->slot_reset) { + !driver->err_handler->slot_reset || + (edev->mode & EEH_DEV_NO_HANDLER)) { eeh_pcid_put(dev); return NULL; } @@ -297,7 +299,9 @@ static void *eeh_report_resume(void *data, void *userdata) eeh_enable_irq(dev); if (!driver->err_handler || - !driver->err_handler->resume) { + !driver->err_handler->resume || + (edev->mode & EEH_DEV_NO_HANDLER)) { + edev->mode &= ~EEH_DEV_NO_HANDLER; eeh_pcid_put(dev); return NULL; } @@ -358,9 +362,13 @@ static void *eeh_rmv_device(void *data, void *userdata) */ if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)) return NULL; + driver = eeh_pcid_get(dev); - if (driver && driver->err_handler) - return NULL; + if (driver) { + eeh_pcid_put(dev); + if (driver->err_handler) + return NULL; + } /* Remove it from PCI subsystem */ pr_debug("EEH: Removing %s without EEH sensitive driver\n", @@ -476,7 +484,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) /* The longest amount of time to wait for a pci device * to come back on line, in seconds. */ -#define MAX_WAIT_FOR_RECOVERY 150 +#define MAX_WAIT_FOR_RECOVERY 300 static void eeh_handle_normal_event(struct eeh_pe *pe) { @@ -637,86 +645,92 @@ static void eeh_handle_special_event(void) { struct eeh_pe *pe, *phb_pe; struct pci_bus *bus; - struct pci_controller *hose, *tmp; + struct pci_controller *hose; unsigned long flags; - int rc = 0; + int rc; - /* - * The return value from next_error() has been classified as follows. - * It might be good to enumerate them. However, next_error() is only - * supported by PowerNV platform for now. So it would be fine to use - * integer directly: - * - * 4 - Dead IOC 3 - Dead PHB - * 2 - Fenced PHB 1 - Frozen PE - * 0 - No error found - * - */ - rc = eeh_ops->next_error(&pe); - if (rc <= 0) - return; - switch (rc) { - case 4: - /* Mark all PHBs in dead state */ - eeh_serialize_lock(&flags); - list_for_each_entry_safe(hose, tmp, - &hose_list, list_node) { - phb_pe = eeh_phb_pe_get(hose); - if (!phb_pe) continue; - - eeh_pe_state_mark(phb_pe, - EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + do { + rc = eeh_ops->next_error(&pe); + + switch (rc) { + case EEH_NEXT_ERR_DEAD_IOC: + /* Mark all PHBs in dead state */ + eeh_serialize_lock(&flags); + + /* Purge all events */ + eeh_remove_event(NULL); + + list_for_each_entry(hose, &hose_list, list_node) { + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe) continue; + + eeh_pe_state_mark(phb_pe, + EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + } + + eeh_serialize_unlock(flags); + + break; + case EEH_NEXT_ERR_FROZEN_PE: + case EEH_NEXT_ERR_FENCED_PHB: + case EEH_NEXT_ERR_DEAD_PHB: + /* Mark the PE in fenced state */ + eeh_serialize_lock(&flags); + + /* Purge all events of the PHB */ + eeh_remove_event(pe); + + if (rc == EEH_NEXT_ERR_DEAD_PHB) + eeh_pe_state_mark(pe, + EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); + else + eeh_pe_state_mark(pe, + EEH_PE_ISOLATED | EEH_PE_RECOVERING); + + eeh_serialize_unlock(flags); + + break; + case EEH_NEXT_ERR_NONE: + return; + default: + pr_warn("%s: Invalid value %d from next_error()\n", + __func__, rc); + return; } - eeh_serialize_unlock(flags); - - /* Purge all events */ - eeh_remove_event(NULL); - break; - case 3: - case 2: - case 1: - /* Mark the PE in fenced state */ - eeh_serialize_lock(&flags); - if (rc == 3) - eeh_pe_state_mark(pe, - EEH_PE_ISOLATED | EEH_PE_PHB_DEAD); - else - eeh_pe_state_mark(pe, - EEH_PE_ISOLATED | EEH_PE_RECOVERING); - eeh_serialize_unlock(flags); - - /* Purge all events of the PHB */ - eeh_remove_event(pe); - break; - default: - pr_err("%s: Invalid value %d from next_error()\n", - __func__, rc); - return; - } - /* - * For fenced PHB and frozen PE, it's handled as normal - * event. We have to remove the affected PHBs for dead - * PHB and IOC - */ - if (rc == 2 || rc == 1) - eeh_handle_normal_event(pe); - else { - pci_lock_rescan_remove(); - list_for_each_entry_safe(hose, tmp, - &hose_list, list_node) { - phb_pe = eeh_phb_pe_get(hose); - if (!phb_pe || !(phb_pe->state & EEH_PE_PHB_DEAD)) - continue; - - bus = eeh_pe_bus_get(phb_pe); - /* Notify all devices that they're about to go down. */ - eeh_pe_dev_traverse(pe, eeh_report_failure, NULL); - pcibios_remove_pci_devices(bus); + /* + * For fenced PHB and frozen PE, it's handled as normal + * event. We have to remove the affected PHBs for dead + * PHB and IOC + */ + if (rc == EEH_NEXT_ERR_FROZEN_PE || + rc == EEH_NEXT_ERR_FENCED_PHB) { + eeh_handle_normal_event(pe); + } else { + pci_lock_rescan_remove(); + list_for_each_entry(hose, &hose_list, list_node) { + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe || + !(phb_pe->state & EEH_PE_PHB_DEAD)) + continue; + + /* Notify all devices to be down */ + bus = eeh_pe_bus_get(phb_pe); + eeh_pe_dev_traverse(pe, + eeh_report_failure, NULL); + pcibios_remove_pci_devices(bus); + } + pci_unlock_rescan_remove(); } - pci_unlock_rescan_remove(); - } + + /* + * If we have detected dead IOC, we needn't proceed + * any more since all PHBs would have been removed + */ + if (rc == EEH_NEXT_ERR_DEAD_IOC) + break; + } while (rc != EEH_NEXT_ERR_NONE); } /** diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index f9450537e33..f0c353fa655 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -25,7 +25,6 @@ #include <linux/delay.h> #include <linux/export.h> #include <linux/gfp.h> -#include <linux/init.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/string.h> @@ -737,6 +736,9 @@ static void *eeh_restore_one_device_bars(void *data, void *flag) else eeh_restore_device_bars(edev, dn); + if (eeh_ops->restore_config) + eeh_ops->restore_config(dn); + return NULL; } diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index bbfb0294b35..662c6dd9807 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -664,8 +664,16 @@ _GLOBAL(ret_from_except_lite) bl .restore_interrupts SCHEDULE_USER b .ret_from_except_lite - -2: bl .save_nvgprs +2: +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + andi. r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM + bne 3f /* only restore TM if nothing else to do */ + addi r3,r1,STACK_FRAME_OVERHEAD + bl .restore_tm_state + b restore +3: +#endif + bl .save_nvgprs bl .restore_interrupts addi r3,r1,STACK_FRAME_OVERHEAD bl .do_notify_resume diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index e7751561fd1..063b65dd4f2 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -308,6 +308,7 @@ interrupt_base_book3e: /* fake trap */ EXCEPTION_STUB(0x2e0, guest_doorbell_crit) EXCEPTION_STUB(0x300, hypercall) EXCEPTION_STUB(0x320, ehpriv) + EXCEPTION_STUB(0x340, lrat_error) .globl interrupt_end_book3e interrupt_end_book3e: @@ -677,6 +678,17 @@ kernel_dbg_exc: bl .unknown_exception b .ret_from_except +/* LRAT Error interrupt */ + START_EXCEPTION(lrat_error); + NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x340, PACA_EXGEN, INTS_KEEP) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .save_nvgprs + INTS_RESTORE_HARD + bl .unknown_exception + b .ret_from_except + /* * An interrupt came in while soft-disabled; We mark paca->irq_happened * accordingly and if the interrupt is level sensitive, we hard disable @@ -859,6 +871,7 @@ BAD_STACK_TRAMPOLINE(0x2e0) BAD_STACK_TRAMPOLINE(0x300) BAD_STACK_TRAMPOLINE(0x310) BAD_STACK_TRAMPOLINE(0x320) +BAD_STACK_TRAMPOLINE(0x340) BAD_STACK_TRAMPOLINE(0x400) BAD_STACK_TRAMPOLINE(0x500) BAD_STACK_TRAMPOLINE(0x600) @@ -1055,12 +1068,9 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_MAS0,r3 tlbre mfspr r6,SPRN_MAS1 - rlwinm r6,r6,0,2,0 /* clear IPROT */ + rlwinm r6,r6,0,2,31 /* clear IPROT and VALID */ mtspr SPRN_MAS1,r6 tlbwe - - /* Invalidate TLB1 */ - PPC_TLBILX_ALL(0,R0) sync isync @@ -1114,12 +1124,9 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_MAS0,r4 tlbre mfspr r5,SPRN_MAS1 - rlwinm r5,r5,0,2,0 /* clear IPROT */ + rlwinm r5,r5,0,2,31 /* clear IPROT and VALID */ mtspr SPRN_MAS1,r5 tlbwe - - /* Invalidate TLB1 */ - PPC_TLBILX_ALL(0,R0) sync isync @@ -1414,3 +1421,7 @@ _GLOBAL(setup_ehv_ivors) SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */ SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */ blr + +_GLOBAL(setup_lrat_ivor) + SET_IVOR(42, 0x340) /* LRAT Error */ + blr diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 9f905e40922..38d507306a1 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -155,8 +155,30 @@ machine_check_pSeries_1: */ HMT_MEDIUM_PPR_DISCARD SET_SCRATCH0(r13) /* save r13 */ +#ifdef CONFIG_PPC_P7_NAP +BEGIN_FTR_SECTION + /* Running native on arch 2.06 or later, check if we are + * waking up from nap. We only handle no state loss and + * supervisor state loss. We do -not- handle hypervisor + * state loss at this time. + */ + mfspr r13,SPRN_SRR1 + rlwinm. r13,r13,47-31,30,31 + beq 9f + + /* waking up from powersave (nap) state */ + cmpwi cr1,r13,2 + /* Total loss of HV state is fatal. let's just stay stuck here */ + bgt cr1,. +9: +END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) +#endif /* CONFIG_PPC_P7_NAP */ EXCEPTION_PROLOG_0(PACA_EXMC) +BEGIN_FTR_SECTION + b machine_check_pSeries_early +FTR_SECTION_ELSE b machine_check_pSeries_0 +ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE) . = 0x300 .globl data_access_pSeries @@ -405,6 +427,64 @@ denorm_exception_hv: .align 7 /* moved from 0x200 */ +machine_check_pSeries_early: +BEGIN_FTR_SECTION + EXCEPTION_PROLOG_1(PACA_EXMC, NOTEST, 0x200) + /* + * Register contents: + * R13 = PACA + * R9 = CR + * Original R9 to R13 is saved on PACA_EXMC + * + * Switch to mc_emergency stack and handle re-entrancy (though we + * currently don't test for overflow). Save MCE registers srr1, + * srr0, dar and dsisr and then set ME=1 + * + * We use paca->in_mce to check whether this is the first entry or + * nested machine check. We increment paca->in_mce to track nested + * machine checks. + * + * If this is the first entry then set stack pointer to + * paca->mc_emergency_sp, otherwise r1 is already pointing to + * stack frame on mc_emergency stack. + * + * NOTE: We are here with MSR_ME=0 (off), which means we risk a + * checkstop if we get another machine check exception before we do + * rfid with MSR_ME=1. + */ + mr r11,r1 /* Save r1 */ + lhz r10,PACA_IN_MCE(r13) + cmpwi r10,0 /* Are we in nested machine check */ + bne 0f /* Yes, we are. */ + /* First machine check entry */ + ld r1,PACAMCEMERGSP(r13) /* Use MC emergency stack */ +0: subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */ + addi r10,r10,1 /* increment paca->in_mce */ + sth r10,PACA_IN_MCE(r13) + std r11,GPR1(r1) /* Save r1 on the stack. */ + std r11,0(r1) /* make stack chain pointer */ + mfspr r11,SPRN_SRR0 /* Save SRR0 */ + std r11,_NIP(r1) + mfspr r11,SPRN_SRR1 /* Save SRR1 */ + std r11,_MSR(r1) + mfspr r11,SPRN_DAR /* Save DAR */ + std r11,_DAR(r1) + mfspr r11,SPRN_DSISR /* Save DSISR */ + std r11,_DSISR(r1) + std r9,_CCR(r1) /* Save CR in stackframe */ + /* Save r9 through r13 from EXMC save area to stack frame. */ + EXCEPTION_PROLOG_COMMON_2(PACA_EXMC) + mfmsr r11 /* get MSR value */ + ori r11,r11,MSR_ME /* turn on ME bit */ + ori r11,r11,MSR_RI /* turn on RI bit */ + ld r12,PACAKBASE(r13) /* get high part of &label */ + LOAD_HANDLER(r12, machine_check_handle_early) + mtspr SPRN_SRR0,r12 + mtspr SPRN_SRR1,r11 + rfid + b . /* prevent speculative execution */ +END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) + machine_check_pSeries: .globl machine_check_fwnmi machine_check_fwnmi: @@ -688,30 +768,6 @@ kvmppc_skip_Hinterrupt: STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) - /* - * Machine check is different because we use a different - * save area: PACA_EXMC instead of PACA_EXGEN. - */ - .align 7 - .globl machine_check_common -machine_check_common: - - mfspr r10,SPRN_DAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_DSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) - FINISH_NAP - DISABLE_INTS - ld r3,PACA_EXGEN+EX_DAR(r13) - lwz r4,PACA_EXGEN+EX_DSISR(r13) - std r3,_DAR(r1) - std r4,_DSISR(r1) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_exception - b .ret_from_except - STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt) @@ -1080,6 +1136,30 @@ unrecov_user_slb: #endif /* __DISABLED__ */ + /* + * Machine check is different because we use a different + * save area: PACA_EXMC instead of PACA_EXGEN. + */ + .align 7 + .globl machine_check_common +machine_check_common: + + mfspr r10,SPRN_DAR + std r10,PACA_EXGEN+EX_DAR(r13) + mfspr r10,SPRN_DSISR + stw r10,PACA_EXGEN+EX_DSISR(r13) + EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) + FINISH_NAP + DISABLE_INTS + ld r3,PACA_EXGEN+EX_DAR(r13) + lwz r4,PACA_EXGEN+EX_DSISR(r13) + std r3,_DAR(r1) + std r4,_DSISR(r1) + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl .machine_check_exception + b .ret_from_except + .align 7 .globl alignment_common alignment_common: @@ -1263,6 +1343,120 @@ _GLOBAL(opal_mc_secondary_handler) #endif /* CONFIG_PPC_POWERNV */ +#define MACHINE_CHECK_HANDLER_WINDUP \ + /* Clear MSR_RI before setting SRR0 and SRR1. */\ + li r0,MSR_RI; \ + mfmsr r9; /* get MSR value */ \ + andc r9,r9,r0; \ + mtmsrd r9,1; /* Clear MSR_RI */ \ + /* Move original SRR0 and SRR1 into the respective regs */ \ + ld r9,_MSR(r1); \ + mtspr SPRN_SRR1,r9; \ + ld r3,_NIP(r1); \ + mtspr SPRN_SRR0,r3; \ + ld r9,_CTR(r1); \ + mtctr r9; \ + ld r9,_XER(r1); \ + mtxer r9; \ + ld r9,_LINK(r1); \ + mtlr r9; \ + REST_GPR(0, r1); \ + REST_8GPRS(2, r1); \ + REST_GPR(10, r1); \ + ld r11,_CCR(r1); \ + mtcr r11; \ + /* Decrement paca->in_mce. */ \ + lhz r12,PACA_IN_MCE(r13); \ + subi r12,r12,1; \ + sth r12,PACA_IN_MCE(r13); \ + REST_GPR(11, r1); \ + REST_2GPRS(12, r1); \ + /* restore original r1. */ \ + ld r1,GPR1(r1) + + /* + * Handle machine check early in real mode. We come here with + * ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack. + */ + .align 7 + .globl machine_check_handle_early +machine_check_handle_early: + std r0,GPR0(r1) /* Save r0 */ + EXCEPTION_PROLOG_COMMON_3(0x200) + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl .machine_check_early + ld r12,_MSR(r1) +#ifdef CONFIG_PPC_P7_NAP + /* + * Check if thread was in power saving mode. We come here when any + * of the following is true: + * a. thread wasn't in power saving mode + * b. thread was in power saving mode with no state loss or + * supervisor state loss + * + * Go back to nap again if (b) is true. + */ + rlwinm. r11,r12,47-31,30,31 /* Was it in power saving mode? */ + beq 4f /* No, it wasn;t */ + /* Thread was in power saving mode. Go back to nap again. */ + cmpwi r11,2 + bne 3f + /* Supervisor state loss */ + li r0,1 + stb r0,PACA_NAPSTATELOST(r13) +3: bl .machine_check_queue_event + MACHINE_CHECK_HANDLER_WINDUP + GET_PACA(r13) + ld r1,PACAR1(r13) + b .power7_enter_nap_mode +4: +#endif + /* + * Check if we are coming from hypervisor userspace. If yes then we + * continue in host kernel in V mode to deliver the MC event. + */ + rldicl. r11,r12,4,63 /* See if MC hit while in HV mode. */ + beq 5f + andi. r11,r12,MSR_PR /* See if coming from user. */ + bne 9f /* continue in V mode if we are. */ + +5: +#ifdef CONFIG_KVM_BOOK3S_64_HV + /* + * We are coming from kernel context. Check if we are coming from + * guest. if yes, then we can continue. We will fall through + * do_kvm_200->kvmppc_interrupt to deliver the MC event to guest. + */ + lbz r11,HSTATE_IN_GUEST(r13) + cmpwi r11,0 /* Check if coming from guest */ + bne 9f /* continue if we are. */ +#endif + /* + * At this point we are not sure about what context we come from. + * Queue up the MCE event and return from the interrupt. + * But before that, check if this is an un-recoverable exception. + * If yes, then stay on emergency stack and panic. + */ + andi. r11,r12,MSR_RI + bne 2f +1: addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b 1b +2: + /* + * Return from MC interrupt. + * Queue up the MCE event so that we can log it later, while + * returning from kernel or opal call. + */ + bl .machine_check_queue_event + MACHINE_CHECK_HANDLER_WINDUP + rfid +9: + /* Deliver the machine check to host kernel in V mode. */ + MACHINE_CHECK_HANDLER_WINDUP + b machine_check_pSeries + /* * r13 points to the PACA, r9 contains the saved CR, * r12 contain the saved SRR1, SRR0 is still ready for return diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index f7f5b8bed68..9ad236e5d2c 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -81,6 +81,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ /* + * Enable use of the FPU, and VSX if possible, for the caller. + */ +_GLOBAL(fp_enable) + mfmsr r3 + ori r3,r3,MSR_FP +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + oris r3,r3,MSR_VSX@h +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif + SYNC + MTMSRD(r3) + isync /* (not necessary for arch 2.02 and later) */ + blr + +/* * Load state from memory into FP registers including FPSCR. * Assumes the caller has enabled FP in the MSR. */ diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S index a92c79be272..f22e7e44fbf 100644 --- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S +++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S @@ -176,6 +176,8 @@ skpinv: addi r6,r6,1 /* Increment */ /* 7. Jump to KERNELBASE mapping */ lis r6,(KERNELBASE & ~0xfff)@h ori r6,r6,(KERNELBASE & ~0xfff)@l + rlwinm r7,r25,0,0x03ffffff + add r6,r7,r6 #elif defined(ENTRY_MAPPING_KEXEC_SETUP) /* diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 9b27b293a92..b0ded97ee4e 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -74,6 +74,7 @@ ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new) */ static int test_24bit_addr(unsigned long ip, unsigned long addr) { + addr = ppc_function_entry((void *)addr); /* use the create_branch to verify that this offset can be branched */ return create_branch((unsigned int *)ip, addr, 0); diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 4f0946de2d5..b7363bd4245 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -23,6 +23,7 @@ */ #include <linux/threads.h> +#include <linux/init.h> #include <asm/reg.h> #include <asm/page.h> #include <asm/mmu.h> diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index f45726a1d96..b497188a94a 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -65,29 +65,78 @@ _ENTRY(_start); nop /* Translate device tree address to physical, save in r30/r31 */ - mfmsr r16 - mfspr r17,SPRN_PID - rlwinm r17,r17,16,0x3fff0000 /* turn PID into MAS6[SPID] */ - rlwimi r17,r16,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */ - mtspr SPRN_MAS6,r17 - - tlbsx 0,r3 /* must succeed */ - - mfspr r16,SPRN_MAS1 - mfspr r20,SPRN_MAS3 - rlwinm r17,r16,25,0x1f /* r17 = log2(page size) */ - li r18,1024 - slw r18,r18,r17 /* r18 = page size */ - addi r18,r18,-1 - and r19,r3,r18 /* r19 = page offset */ - andc r31,r20,r18 /* r31 = page base */ - or r31,r31,r19 /* r31 = devtree phys addr */ - mfspr r30,SPRN_MAS7 + bl get_phys_addr + mr r30,r3 + mr r31,r4 li r25,0 /* phys kernel start (low) */ li r24,0 /* CPU number */ li r23,0 /* phys kernel start (high) */ +#ifdef CONFIG_RELOCATABLE + LOAD_REG_ADDR_PIC(r3, _stext) /* Get our current runtime base */ + + /* Translate _stext address to physical, save in r23/r25 */ + bl get_phys_addr + mr r23,r3 + mr r25,r4 + + bl 0f +0: mflr r8 + addis r3,r8,(is_second_reloc - 0b)@ha + lwz r19,(is_second_reloc - 0b)@l(r3) + + /* Check if this is the second relocation. */ + cmpwi r19,1 + bne 1f + + /* + * For the second relocation, we already get the real memstart_addr + * from device tree. So we will map PAGE_OFFSET to memstart_addr, + * then the virtual address of start kernel should be: + * PAGE_OFFSET + (kernstart_addr - memstart_addr) + * Since the offset between kernstart_addr and memstart_addr should + * never be beyond 1G, so we can just use the lower 32bit of them + * for the calculation. + */ + lis r3,PAGE_OFFSET@h + + addis r4,r8,(kernstart_addr - 0b)@ha + addi r4,r4,(kernstart_addr - 0b)@l + lwz r5,4(r4) + + addis r6,r8,(memstart_addr - 0b)@ha + addi r6,r6,(memstart_addr - 0b)@l + lwz r7,4(r6) + + subf r5,r7,r5 + add r3,r3,r5 + b 2f + +1: + /* + * We have the runtime (virutal) address of our base. + * We calculate our shift of offset from a 64M page. + * We could map the 64M page we belong to at PAGE_OFFSET and + * get going from there. + */ + lis r4,KERNELBASE@h + ori r4,r4,KERNELBASE@l + rlwinm r6,r25,0,0x3ffffff /* r6 = PHYS_START % 64M */ + rlwinm r5,r4,0,0x3ffffff /* r5 = KERNELBASE % 64M */ + subf r3,r5,r6 /* r3 = r6 - r5 */ + add r3,r4,r3 /* Required Virtual Address */ + +2: bl relocate + + /* + * For the second relocation, we already set the right tlb entries + * for the kernel space, so skip the code in fsl_booke_entry_mapping.S + */ + cmpwi r19,1 + beq set_ivor +#endif + /* We try to not make any assumptions about how the boot loader * setup or used the TLBs. We invalidate all mappings from the * boot loader and load a single entry in TLB1[0] to map the @@ -113,6 +162,7 @@ _ENTRY(__early_start) #include "fsl_booke_entry_mapping.S" #undef ENTRY_MAPPING_BOOT_SETUP +set_ivor: /* Establish the interrupt vector offsets */ SET_IVOR(0, CriticalInput); SET_IVOR(1, MachineCheck); @@ -166,8 +216,7 @@ _ENTRY(__early_start) /* Check to see if we're the second processor, and jump * to the secondary_start code if so */ - lis r24, boot_cpuid@h - ori r24, r24, boot_cpuid@l + LOAD_REG_ADDR_PIC(r24, boot_cpuid) lwz r24, 0(r24) cmpwi r24, -1 mfspr r24,SPRN_PIR @@ -197,6 +246,18 @@ _ENTRY(__early_start) bl early_init +#ifdef CONFIG_RELOCATABLE + mr r3,r30 + mr r4,r31 +#ifdef CONFIG_PHYS_64BIT + mr r5,r23 + mr r6,r25 +#else + mr r5,r25 +#endif + bl relocate_init +#endif + #ifdef CONFIG_DYNAMIC_MEMSTART lis r3,kernstart_addr@ha la r3,kernstart_addr@l(r3) @@ -856,6 +917,33 @@ KernelSPE: #endif /* CONFIG_SPE */ /* + * Translate the effec addr in r3 to phys addr. The phys addr will be put + * into r3(higher 32bit) and r4(lower 32bit) + */ +get_phys_addr: + mfmsr r8 + mfspr r9,SPRN_PID + rlwinm r9,r9,16,0x3fff0000 /* turn PID into MAS6[SPID] */ + rlwimi r9,r8,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */ + mtspr SPRN_MAS6,r9 + + tlbsx 0,r3 /* must succeed */ + + mfspr r8,SPRN_MAS1 + mfspr r12,SPRN_MAS3 + rlwinm r9,r8,25,0x1f /* r9 = log2(page size) */ + li r10,1024 + slw r10,r10,r9 /* r10 = page size */ + addi r10,r10,-1 + and r11,r3,r10 /* r11 = page offset */ + andc r4,r12,r10 /* r4 = page base */ + or r4,r4,r11 /* r4 = devtree phys addr */ +#ifdef CONFIG_PHYS_64BIT + mfspr r3,SPRN_MAS7 +#endif + blr + +/* * Global functions */ @@ -1057,24 +1145,36 @@ _GLOBAL(__flush_disable_L1) /* When we get here, r24 needs to hold the CPU # */ .globl __secondary_start __secondary_start: - lis r3,__secondary_hold_acknowledge@h - ori r3,r3,__secondary_hold_acknowledge@l - stw r24,0(r3) - - li r3,0 - mr r4,r24 /* Why? */ - bl call_setup_cpu - - lis r3,tlbcam_index@ha - lwz r3,tlbcam_index@l(r3) + LOAD_REG_ADDR_PIC(r3, tlbcam_index) + lwz r3,0(r3) mtctr r3 li r26,0 /* r26 safe? */ + bl switch_to_as1 + mr r27,r3 /* tlb entry */ /* Load each CAM entry */ 1: mr r3,r26 bl loadcam_entry addi r26,r26,1 bdnz 1b + mr r3,r27 /* tlb entry */ + LOAD_REG_ADDR_PIC(r4, memstart_addr) + lwz r4,0(r4) + mr r5,r25 /* phys kernel start */ + rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */ + subf r4,r5,r4 /* memstart_addr - phys kernel start */ + li r5,0 /* no device tree */ + li r6,0 /* not boot cpu */ + bl restore_to_as0 + + + lis r3,__secondary_hold_acknowledge@h + ori r3,r3,__secondary_hold_acknowledge@l + stw r24,0(r3) + + li r3,0 + mr r4,r24 /* Why? */ + bl call_setup_cpu /* get current_thread_info and current */ lis r1,secondary_ti@ha @@ -1111,6 +1211,112 @@ __secondary_hold_acknowledge: #endif /* + * Create a tlb entry with the same effective and physical address as + * the tlb entry used by the current running code. But set the TS to 1. + * Then switch to the address space 1. It will return with the r3 set to + * the ESEL of the new created tlb. + */ +_GLOBAL(switch_to_as1) + mflr r5 + + /* Find a entry not used */ + mfspr r3,SPRN_TLB1CFG + andi. r3,r3,0xfff + mfspr r4,SPRN_PID + rlwinm r4,r4,16,0x3fff0000 /* turn PID into MAS6[SPID] */ + mtspr SPRN_MAS6,r4 +1: lis r4,0x1000 /* Set MAS0(TLBSEL) = 1 */ + addi r3,r3,-1 + rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r4 + tlbre + mfspr r4,SPRN_MAS1 + andis. r4,r4,MAS1_VALID@h + bne 1b + + /* Get the tlb entry used by the current running code */ + bl 0f +0: mflr r4 + tlbsx 0,r4 + + mfspr r4,SPRN_MAS1 + ori r4,r4,MAS1_TS /* Set the TS = 1 */ + mtspr SPRN_MAS1,r4 + + mfspr r4,SPRN_MAS0 + rlwinm r4,r4,0,~MAS0_ESEL_MASK + rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r4 + tlbwe + isync + sync + + mfmsr r4 + ori r4,r4,MSR_IS | MSR_DS + mtspr SPRN_SRR0,r5 + mtspr SPRN_SRR1,r4 + sync + rfi + +/* + * Restore to the address space 0 and also invalidate the tlb entry created + * by switch_to_as1. + * r3 - the tlb entry which should be invalidated + * r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0) + * r5 - device tree virtual address. If r4 is 0, r5 is ignored. + * r6 - boot cpu +*/ +_GLOBAL(restore_to_as0) + mflr r0 + + bl 0f +0: mflr r9 + addi r9,r9,1f - 0b + + /* + * We may map the PAGE_OFFSET in AS0 to a different physical address, + * so we need calculate the right jump and device tree address based + * on the offset passed by r4. + */ + add r9,r9,r4 + add r5,r5,r4 + add r0,r0,r4 + +2: mfmsr r7 + li r8,(MSR_IS | MSR_DS) + andc r7,r7,r8 + + mtspr SPRN_SRR0,r9 + mtspr SPRN_SRR1,r7 + sync + rfi + + /* Invalidate the temporary tlb entry for AS1 */ +1: lis r9,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r9,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r9 + tlbre + mfspr r9,SPRN_MAS1 + rlwinm r9,r9,0,2,31 /* Clear MAS1 Valid and IPPROT */ + mtspr SPRN_MAS1,r9 + tlbwe + isync + + cmpwi r4,0 + cmpwi cr1,r6,0 + cror eq,4*cr1+eq,eq + bne 3f /* offset != 0 && is_boot_cpu */ + mtlr r0 + blr + + /* + * The PAGE_OFFSET will map to a different physical address, + * jump to _start to do another relocation again. + */ +3: mr r3,r5 + bl _start + +/* * We put a few things here that have to be page-aligned. This stuff * goes at the beginning of the data segment, which is page-aligned. */ diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index f0b47d1a6b0..b0a1792279b 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -28,7 +28,6 @@ #include <linux/percpu.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/init.h> #include <linux/smp.h> #include <asm/hw_breakpoint.h> diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 847e40e62fc..3fdef0f0c67 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -84,6 +84,7 @@ _GLOBAL(power7_nap) std r9,_MSR(r1) std r1,PACAR1(r13) +_GLOBAL(power7_enter_nap_mode) #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE /* Tell KVM we're napping */ li r4,KVM_HWTHREAD_IN_NAP diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c index 97a3715ac8b..b82227e7e21 100644 --- a/arch/powerpc/kernel/iomap.c +++ b/arch/powerpc/kernel/iomap.c @@ -3,7 +3,6 @@ * * (C) Copyright 2004 Linus Torvalds */ -#include <linux/init.h> #include <linux/pci.h> #include <linux/mm.h> #include <linux/export.h> diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 572bb5b95f3..88e3ec6e1d9 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -251,14 +251,13 @@ again: if (dev) boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, - 1 << IOMMU_PAGE_SHIFT); + 1 << tbl->it_page_shift); else - boundary_size = ALIGN(1UL << 32, 1 << IOMMU_PAGE_SHIFT); + boundary_size = ALIGN(1UL << 32, 1 << tbl->it_page_shift); /* 4GB boundary for iseries_hv_alloc and iseries_hv_map */ - n = iommu_area_alloc(tbl->it_map, limit, start, npages, - tbl->it_offset, boundary_size >> IOMMU_PAGE_SHIFT, - align_mask); + n = iommu_area_alloc(tbl->it_map, limit, start, npages, tbl->it_offset, + boundary_size >> tbl->it_page_shift, align_mask); if (n == -1) { if (likely(pass == 0)) { /* First try the pool from the start */ @@ -320,12 +319,12 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl, return DMA_ERROR_CODE; entry += tbl->it_offset; /* Offset into real TCE table */ - ret = entry << IOMMU_PAGE_SHIFT; /* Set the return dma address */ + ret = entry << tbl->it_page_shift; /* Set the return dma address */ /* Put the TCEs in the HW table */ build_fail = ppc_md.tce_build(tbl, entry, npages, - (unsigned long)page & IOMMU_PAGE_MASK, - direction, attrs); + (unsigned long)page & + IOMMU_PAGE_MASK(tbl), direction, attrs); /* ppc_md.tce_build() only returns non-zero for transient errors. * Clean up the table bitmap in this case and return @@ -352,7 +351,7 @@ static bool iommu_free_check(struct iommu_table *tbl, dma_addr_t dma_addr, { unsigned long entry, free_entry; - entry = dma_addr >> IOMMU_PAGE_SHIFT; + entry = dma_addr >> tbl->it_page_shift; free_entry = entry - tbl->it_offset; if (((free_entry + npages) > tbl->it_size) || @@ -401,7 +400,7 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, unsigned long flags; struct iommu_pool *pool; - entry = dma_addr >> IOMMU_PAGE_SHIFT; + entry = dma_addr >> tbl->it_page_shift; free_entry = entry - tbl->it_offset; pool = get_pool(tbl, free_entry); @@ -468,13 +467,13 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, } /* Allocate iommu entries for that segment */ vaddr = (unsigned long) sg_virt(s); - npages = iommu_num_pages(vaddr, slen, IOMMU_PAGE_SIZE); + npages = iommu_num_pages(vaddr, slen, IOMMU_PAGE_SIZE(tbl)); align = 0; - if (IOMMU_PAGE_SHIFT < PAGE_SHIFT && slen >= PAGE_SIZE && + if (tbl->it_page_shift < PAGE_SHIFT && slen >= PAGE_SIZE && (vaddr & ~PAGE_MASK) == 0) - align = PAGE_SHIFT - IOMMU_PAGE_SHIFT; + align = PAGE_SHIFT - tbl->it_page_shift; entry = iommu_range_alloc(dev, tbl, npages, &handle, - mask >> IOMMU_PAGE_SHIFT, align); + mask >> tbl->it_page_shift, align); DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen); @@ -489,16 +488,16 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, /* Convert entry to a dma_addr_t */ entry += tbl->it_offset; - dma_addr = entry << IOMMU_PAGE_SHIFT; - dma_addr |= (s->offset & ~IOMMU_PAGE_MASK); + dma_addr = entry << tbl->it_page_shift; + dma_addr |= (s->offset & ~IOMMU_PAGE_MASK(tbl)); DBG(" - %lu pages, entry: %lx, dma_addr: %lx\n", npages, entry, dma_addr); /* Insert into HW table */ build_fail = ppc_md.tce_build(tbl, entry, npages, - vaddr & IOMMU_PAGE_MASK, - direction, attrs); + vaddr & IOMMU_PAGE_MASK(tbl), + direction, attrs); if(unlikely(build_fail)) goto failure; @@ -559,9 +558,9 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, if (s->dma_length != 0) { unsigned long vaddr, npages; - vaddr = s->dma_address & IOMMU_PAGE_MASK; + vaddr = s->dma_address & IOMMU_PAGE_MASK(tbl); npages = iommu_num_pages(s->dma_address, s->dma_length, - IOMMU_PAGE_SIZE); + IOMMU_PAGE_SIZE(tbl)); __iommu_free(tbl, vaddr, npages); s->dma_address = DMA_ERROR_CODE; s->dma_length = 0; @@ -592,7 +591,7 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, if (sg->dma_length == 0) break; npages = iommu_num_pages(dma_handle, sg->dma_length, - IOMMU_PAGE_SIZE); + IOMMU_PAGE_SIZE(tbl)); __iommu_free(tbl, dma_handle, npages); sg = sg_next(sg); } @@ -676,7 +675,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) set_bit(0, tbl->it_map); /* We only split the IOMMU table if we have 1GB or more of space */ - if ((tbl->it_size << IOMMU_PAGE_SHIFT) >= (1UL * 1024 * 1024 * 1024)) + if ((tbl->it_size << tbl->it_page_shift) >= (1UL * 1024 * 1024 * 1024)) tbl->nr_pools = IOMMU_NR_POOLS; else tbl->nr_pools = 1; @@ -768,16 +767,16 @@ dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl, vaddr = page_address(page) + offset; uaddr = (unsigned long)vaddr; - npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE); + npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE(tbl)); if (tbl) { align = 0; - if (IOMMU_PAGE_SHIFT < PAGE_SHIFT && size >= PAGE_SIZE && + if (tbl->it_page_shift < PAGE_SHIFT && size >= PAGE_SIZE && ((unsigned long)vaddr & ~PAGE_MASK) == 0) - align = PAGE_SHIFT - IOMMU_PAGE_SHIFT; + align = PAGE_SHIFT - tbl->it_page_shift; dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction, - mask >> IOMMU_PAGE_SHIFT, align, + mask >> tbl->it_page_shift, align, attrs); if (dma_handle == DMA_ERROR_CODE) { if (printk_ratelimit()) { @@ -786,7 +785,7 @@ dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl, npages); } } else - dma_handle |= (uaddr & ~IOMMU_PAGE_MASK); + dma_handle |= (uaddr & ~IOMMU_PAGE_MASK(tbl)); } return dma_handle; @@ -801,7 +800,8 @@ void iommu_unmap_page(struct iommu_table *tbl, dma_addr_t dma_handle, BUG_ON(direction == DMA_NONE); if (tbl) { - npages = iommu_num_pages(dma_handle, size, IOMMU_PAGE_SIZE); + npages = iommu_num_pages(dma_handle, size, + IOMMU_PAGE_SIZE(tbl)); iommu_free(tbl, dma_handle, npages); } } @@ -845,10 +845,10 @@ void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, memset(ret, 0, size); /* Set up tces to cover the allocated range */ - nio_pages = size >> IOMMU_PAGE_SHIFT; - io_order = get_iommu_order(size); + nio_pages = size >> tbl->it_page_shift; + io_order = get_iommu_order(size, tbl); mapping = iommu_alloc(dev, tbl, ret, nio_pages, DMA_BIDIRECTIONAL, - mask >> IOMMU_PAGE_SHIFT, io_order, NULL); + mask >> tbl->it_page_shift, io_order, NULL); if (mapping == DMA_ERROR_CODE) { free_pages((unsigned long)ret, order); return NULL; @@ -864,7 +864,7 @@ void iommu_free_coherent(struct iommu_table *tbl, size_t size, unsigned int nio_pages; size = PAGE_ALIGN(size); - nio_pages = size >> IOMMU_PAGE_SHIFT; + nio_pages = size >> tbl->it_page_shift; iommu_free(tbl, dma_handle, nio_pages); size = PAGE_ALIGN(size); free_pages((unsigned long)vaddr, get_order(size)); @@ -935,10 +935,10 @@ int iommu_tce_clear_param_check(struct iommu_table *tbl, if (tce_value) return -EINVAL; - if (ioba & ~IOMMU_PAGE_MASK) + if (ioba & ~IOMMU_PAGE_MASK(tbl)) return -EINVAL; - ioba >>= IOMMU_PAGE_SHIFT; + ioba >>= tbl->it_page_shift; if (ioba < tbl->it_offset) return -EINVAL; @@ -955,13 +955,13 @@ int iommu_tce_put_param_check(struct iommu_table *tbl, if (!(tce & (TCE_PCI_WRITE | TCE_PCI_READ))) return -EINVAL; - if (tce & ~(IOMMU_PAGE_MASK | TCE_PCI_WRITE | TCE_PCI_READ)) + if (tce & ~(IOMMU_PAGE_MASK(tbl) | TCE_PCI_WRITE | TCE_PCI_READ)) return -EINVAL; - if (ioba & ~IOMMU_PAGE_MASK) + if (ioba & ~IOMMU_PAGE_MASK(tbl)) return -EINVAL; - ioba >>= IOMMU_PAGE_SHIFT; + ioba >>= tbl->it_page_shift; if (ioba < tbl->it_offset) return -EINVAL; @@ -1037,7 +1037,7 @@ int iommu_tce_build(struct iommu_table *tbl, unsigned long entry, /* if (unlikely(ret)) pr_err("iommu_tce: %s failed on hwaddr=%lx ioba=%lx kva=%lx ret=%d\n", - __func__, hwaddr, entry << IOMMU_PAGE_SHIFT, + __func__, hwaddr, entry << IOMMU_PAGE_SHIFT(tbl), hwaddr, ret); */ return ret; @@ -1049,14 +1049,14 @@ int iommu_put_tce_user_mode(struct iommu_table *tbl, unsigned long entry, { int ret; struct page *page = NULL; - unsigned long hwaddr, offset = tce & IOMMU_PAGE_MASK & ~PAGE_MASK; + unsigned long hwaddr, offset = tce & IOMMU_PAGE_MASK(tbl) & ~PAGE_MASK; enum dma_data_direction direction = iommu_tce_direction(tce); ret = get_user_pages_fast(tce & PAGE_MASK, 1, direction != DMA_TO_DEVICE, &page); if (unlikely(ret != 1)) { /* pr_err("iommu_tce: get_user_pages_fast failed tce=%lx ioba=%lx ret=%d\n", - tce, entry << IOMMU_PAGE_SHIFT, ret); */ + tce, entry << IOMMU_PAGE_SHIFT(tbl), ret); */ return -EFAULT; } hwaddr = (unsigned long) page_address(page) + offset; @@ -1067,7 +1067,7 @@ int iommu_put_tce_user_mode(struct iommu_table *tbl, unsigned long entry, if (ret < 0) pr_err("iommu_tce: %s failed ioba=%lx, tce=%lx, ret=%d\n", - __func__, entry << IOMMU_PAGE_SHIFT, tce, ret); + __func__, entry << tbl->it_page_shift, tce, ret); return ret; } @@ -1088,6 +1088,14 @@ int iommu_take_ownership(struct iommu_table *tbl) memset(tbl->it_map, 0xff, sz); iommu_clear_tces_and_put_pages(tbl, tbl->it_offset, tbl->it_size); + /* + * Disable iommu bypass, otherwise the user can DMA to all of + * our physical memory via the bypass window instead of just + * the pages that has been explicitly mapped into the iommu + */ + if (tbl->set_bypass) + tbl->set_bypass(tbl, false); + return 0; } EXPORT_SYMBOL_GPL(iommu_take_ownership); @@ -1102,10 +1110,14 @@ void iommu_release_ownership(struct iommu_table *tbl) /* Restore bit#0 set by iommu_init_table() */ if (tbl->it_offset == 0) set_bit(0, tbl->it_map); + + /* The kernel owns the device now, we can restore the iommu bypass */ + if (tbl->set_bypass) + tbl->set_bypass(tbl, true); } EXPORT_SYMBOL_GPL(iommu_release_ownership); -static int iommu_add_device(struct device *dev) +int iommu_add_device(struct device *dev) { struct iommu_table *tbl; int ret = 0; @@ -1127,6 +1139,12 @@ static int iommu_add_device(struct device *dev) pr_debug("iommu_tce: adding %s to iommu group %d\n", dev_name(dev), iommu_group_id(tbl->it_group)); + if (PAGE_SIZE < IOMMU_PAGE_SIZE(tbl)) { + pr_err("iommu_tce: unsupported iommu page size."); + pr_err("%s has not been added\n", dev_name(dev)); + return -EINVAL; + } + ret = iommu_group_add_device(tbl->it_group, dev); if (ret < 0) pr_err("iommu_tce: %s has not been added, ret=%d\n", @@ -1134,52 +1152,23 @@ static int iommu_add_device(struct device *dev) return ret; } +EXPORT_SYMBOL_GPL(iommu_add_device); -static void iommu_del_device(struct device *dev) -{ - iommu_group_remove_device(dev); -} - -static int iommu_bus_notifier(struct notifier_block *nb, - unsigned long action, void *data) +void iommu_del_device(struct device *dev) { - struct device *dev = data; - - switch (action) { - case BUS_NOTIFY_ADD_DEVICE: - return iommu_add_device(dev); - case BUS_NOTIFY_DEL_DEVICE: - iommu_del_device(dev); - return 0; - default: - return 0; + /* + * Some devices might not have IOMMU table and group + * and we needn't detach them from the associated + * IOMMU groups + */ + if (!dev->iommu_group) { + pr_debug("iommu_tce: skipping device %s with no tbl\n", + dev_name(dev)); + return; } -} - -static struct notifier_block tce_iommu_bus_nb = { - .notifier_call = iommu_bus_notifier, -}; - -static int __init tce_iommu_init(void) -{ - struct pci_dev *pdev = NULL; - - BUILD_BUG_ON(PAGE_SIZE < IOMMU_PAGE_SIZE); - - for_each_pci_dev(pdev) - iommu_add_device(&pdev->dev); - - bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb); - return 0; -} - -subsys_initcall_sync(tce_iommu_init); - -#else -void iommu_register_group(struct iommu_table *tbl, - int pci_domain_number, unsigned long pe_num) -{ + iommu_group_remove_device(dev); } +EXPORT_SYMBOL_GPL(iommu_del_device); #endif /* CONFIG_IOMMU_API */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index ba016561521..1d0848bba04 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -354,8 +354,13 @@ int arch_show_interrupts(struct seq_file *p, int prec) seq_printf(p, "%*s: ", prec, "LOC"); for_each_online_cpu(j) - seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs); - seq_printf(p, " Local timer interrupts\n"); + seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs_event); + seq_printf(p, " Local timer interrupts for timer event device\n"); + + seq_printf(p, "%*s: ", prec, "LOC"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs_others); + seq_printf(p, " Local timer interrupts for others\n"); seq_printf(p, "%*s: ", prec, "SPU"); for_each_online_cpu(j) @@ -389,11 +394,12 @@ int arch_show_interrupts(struct seq_file *p, int prec) */ u64 arch_irq_stat_cpu(unsigned int cpu) { - u64 sum = per_cpu(irq_stat, cpu).timer_irqs; + u64 sum = per_cpu(irq_stat, cpu).timer_irqs_event; sum += per_cpu(irq_stat, cpu).pmu_irqs; sum += per_cpu(irq_stat, cpu).mce_exceptions; sum += per_cpu(irq_stat, cpu).spurious_irqs; + sum += per_cpu(irq_stat, cpu).timer_irqs_others; #ifdef CONFIG_PPC_DOORBELL sum += per_cpu(irq_stat, cpu).doorbell_irqs; #endif @@ -553,8 +559,13 @@ void exc_lvl_ctx_init(void) #ifdef CONFIG_PPC64 cpu_nr = i; #else +#ifdef CONFIG_SMP cpu_nr = get_hard_smp_processor_id(i); +#else + cpu_nr = 0; +#endif #endif + memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE); tp = critirq_ctx[cpu_nr]; tp->cpu = cpu_nr; diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 83e89d31073..8504657379f 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -15,7 +15,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/kgdb.h> #include <linux/smp.h> #include <linux/signal.h> diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 75d4f7340da..015ae55c186 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -196,7 +196,9 @@ int overlaps_crashkernel(unsigned long start, unsigned long size) /* Values we need to export to the second kernel via the device tree. */ static phys_addr_t kernel_end; +static phys_addr_t crashk_base; static phys_addr_t crashk_size; +static unsigned long long mem_limit; static struct property kernel_end_prop = { .name = "linux,kernel-end", @@ -207,7 +209,7 @@ static struct property kernel_end_prop = { static struct property crashk_base_prop = { .name = "linux,crashkernel-base", .length = sizeof(phys_addr_t), - .value = &crashk_res.start, + .value = &crashk_base }; static struct property crashk_size_prop = { @@ -219,9 +221,11 @@ static struct property crashk_size_prop = { static struct property memory_limit_prop = { .name = "linux,memory-limit", .length = sizeof(unsigned long long), - .value = &memory_limit, + .value = &mem_limit, }; +#define cpu_to_be_ulong __PASTE(cpu_to_be, BITS_PER_LONG) + static void __init export_crashk_values(struct device_node *node) { struct property *prop; @@ -237,8 +241,9 @@ static void __init export_crashk_values(struct device_node *node) of_remove_property(node, prop); if (crashk_res.start != 0) { + crashk_base = cpu_to_be_ulong(crashk_res.start), of_add_property(node, &crashk_base_prop); - crashk_size = resource_size(&crashk_res); + crashk_size = cpu_to_be_ulong(resource_size(&crashk_res)); of_add_property(node, &crashk_size_prop); } @@ -246,6 +251,7 @@ static void __init export_crashk_values(struct device_node *node) * memory_limit is required by the kexec-tools to limit the * crash regions to the actual memory used. */ + mem_limit = cpu_to_be_ulong(memory_limit); of_update_property(node, &memory_limit_prop); } @@ -264,7 +270,7 @@ static int __init kexec_setup(void) of_remove_property(node, prop); /* information needed by userspace when using default_machine_kexec */ - kernel_end = __pa(_end); + kernel_end = cpu_to_be_ulong(__pa(_end)); of_add_property(node, &kernel_end_prop); export_crashk_values(node); diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index be4e6d648f6..59d229a2a3e 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -369,6 +369,7 @@ void default_machine_kexec(struct kimage *image) /* Values we need to export to the second kernel via the device tree. */ static unsigned long htab_base; +static unsigned long htab_size; static struct property htab_base_prop = { .name = "linux,htab-base", @@ -379,7 +380,7 @@ static struct property htab_base_prop = { static struct property htab_size_prop = { .name = "linux,htab-size", .length = sizeof(unsigned long), - .value = &htab_size_bytes, + .value = &htab_size, }; static int __init export_htab_values(void) @@ -403,8 +404,9 @@ static int __init export_htab_values(void) if (prop) of_remove_property(node, prop); - htab_base = __pa(htab_address); + htab_base = cpu_to_be64(__pa(htab_address)); of_add_property(node, &htab_base_prop); + htab_size = cpu_to_be64(htab_size_bytes); of_add_property(node, &htab_size_prop); of_node_put(node); diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c new file mode 100644 index 00000000000..cadef7e64e4 --- /dev/null +++ b/arch/powerpc/kernel/mce.c @@ -0,0 +1,352 @@ +/* + * Machine check exception handling. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2013 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#undef DEBUG +#define pr_fmt(fmt) "mce: " fmt + +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/percpu.h> +#include <linux/export.h> +#include <linux/irq_work.h> +#include <asm/mce.h> + +static DEFINE_PER_CPU(int, mce_nest_count); +static DEFINE_PER_CPU(struct machine_check_event[MAX_MC_EVT], mce_event); + +/* Queue for delayed MCE events. */ +static DEFINE_PER_CPU(int, mce_queue_count); +static DEFINE_PER_CPU(struct machine_check_event[MAX_MC_EVT], mce_event_queue); + +static void machine_check_process_queued_event(struct irq_work *work); +struct irq_work mce_event_process_work = { + .func = machine_check_process_queued_event, +}; + +static void mce_set_error_info(struct machine_check_event *mce, + struct mce_error_info *mce_err) +{ + mce->error_type = mce_err->error_type; + switch (mce_err->error_type) { + case MCE_ERROR_TYPE_UE: + mce->u.ue_error.ue_error_type = mce_err->u.ue_error_type; + break; + case MCE_ERROR_TYPE_SLB: + mce->u.slb_error.slb_error_type = mce_err->u.slb_error_type; + break; + case MCE_ERROR_TYPE_ERAT: + mce->u.erat_error.erat_error_type = mce_err->u.erat_error_type; + break; + case MCE_ERROR_TYPE_TLB: + mce->u.tlb_error.tlb_error_type = mce_err->u.tlb_error_type; + break; + case MCE_ERROR_TYPE_UNKNOWN: + default: + break; + } +} + +/* + * Decode and save high level MCE information into per cpu buffer which + * is an array of machine_check_event structure. + */ +void save_mce_event(struct pt_regs *regs, long handled, + struct mce_error_info *mce_err, + uint64_t addr) +{ + uint64_t srr1; + int index = __get_cpu_var(mce_nest_count)++; + struct machine_check_event *mce = &__get_cpu_var(mce_event[index]); + + /* + * Return if we don't have enough space to log mce event. + * mce_nest_count may go beyond MAX_MC_EVT but that's ok, + * the check below will stop buffer overrun. + */ + if (index >= MAX_MC_EVT) + return; + + /* Populate generic machine check info */ + mce->version = MCE_V1; + mce->srr0 = regs->nip; + mce->srr1 = regs->msr; + mce->gpr3 = regs->gpr[3]; + mce->in_use = 1; + + mce->initiator = MCE_INITIATOR_CPU; + if (handled) + mce->disposition = MCE_DISPOSITION_RECOVERED; + else + mce->disposition = MCE_DISPOSITION_NOT_RECOVERED; + mce->severity = MCE_SEV_ERROR_SYNC; + + srr1 = regs->msr; + + /* + * Populate the mce error_type and type-specific error_type. + */ + mce_set_error_info(mce, mce_err); + + if (!addr) + return; + + if (mce->error_type == MCE_ERROR_TYPE_TLB) { + mce->u.tlb_error.effective_address_provided = true; + mce->u.tlb_error.effective_address = addr; + } else if (mce->error_type == MCE_ERROR_TYPE_SLB) { + mce->u.slb_error.effective_address_provided = true; + mce->u.slb_error.effective_address = addr; + } else if (mce->error_type == MCE_ERROR_TYPE_ERAT) { + mce->u.erat_error.effective_address_provided = true; + mce->u.erat_error.effective_address = addr; + } else if (mce->error_type == MCE_ERROR_TYPE_UE) { + mce->u.ue_error.effective_address_provided = true; + mce->u.ue_error.effective_address = addr; + } + return; +} + +/* + * get_mce_event: + * mce Pointer to machine_check_event structure to be filled. + * release Flag to indicate whether to free the event slot or not. + * 0 <= do not release the mce event. Caller will invoke + * release_mce_event() once event has been consumed. + * 1 <= release the slot. + * + * return 1 = success + * 0 = failure + * + * get_mce_event() will be called by platform specific machine check + * handle routine and in KVM. + * When we call get_mce_event(), we are still in interrupt context and + * preemption will not be scheduled until ret_from_expect() routine + * is called. + */ +int get_mce_event(struct machine_check_event *mce, bool release) +{ + int index = __get_cpu_var(mce_nest_count) - 1; + struct machine_check_event *mc_evt; + int ret = 0; + + /* Sanity check */ + if (index < 0) + return ret; + + /* Check if we have MCE info to process. */ + if (index < MAX_MC_EVT) { + mc_evt = &__get_cpu_var(mce_event[index]); + /* Copy the event structure and release the original */ + if (mce) + *mce = *mc_evt; + if (release) + mc_evt->in_use = 0; + ret = 1; + } + /* Decrement the count to free the slot. */ + if (release) + __get_cpu_var(mce_nest_count)--; + + return ret; +} + +void release_mce_event(void) +{ + get_mce_event(NULL, true); +} + +/* + * Queue up the MCE event which then can be handled later. + */ +void machine_check_queue_event(void) +{ + int index; + struct machine_check_event evt; + + if (!get_mce_event(&evt, MCE_EVENT_RELEASE)) + return; + + index = __get_cpu_var(mce_queue_count)++; + /* If queue is full, just return for now. */ + if (index >= MAX_MC_EVT) { + __get_cpu_var(mce_queue_count)--; + return; + } + __get_cpu_var(mce_event_queue[index]) = evt; + + /* Queue irq work to process this event later. */ + irq_work_queue(&mce_event_process_work); +} + +/* + * process pending MCE event from the mce event queue. This function will be + * called during syscall exit. + */ +static void machine_check_process_queued_event(struct irq_work *work) +{ + int index; + + /* + * For now just print it to console. + * TODO: log this error event to FSP or nvram. + */ + while (__get_cpu_var(mce_queue_count) > 0) { + index = __get_cpu_var(mce_queue_count) - 1; + machine_check_print_event_info( + &__get_cpu_var(mce_event_queue[index])); + __get_cpu_var(mce_queue_count)--; + } +} + +void machine_check_print_event_info(struct machine_check_event *evt) +{ + const char *level, *sevstr, *subtype; + static const char *mc_ue_types[] = { + "Indeterminate", + "Instruction fetch", + "Page table walk ifetch", + "Load/Store", + "Page table walk Load/Store", + }; + static const char *mc_slb_types[] = { + "Indeterminate", + "Parity", + "Multihit", + }; + static const char *mc_erat_types[] = { + "Indeterminate", + "Parity", + "Multihit", + }; + static const char *mc_tlb_types[] = { + "Indeterminate", + "Parity", + "Multihit", + }; + + /* Print things out */ + if (evt->version != MCE_V1) { + pr_err("Machine Check Exception, Unknown event version %d !\n", + evt->version); + return; + } + switch (evt->severity) { + case MCE_SEV_NO_ERROR: + level = KERN_INFO; + sevstr = "Harmless"; + break; + case MCE_SEV_WARNING: + level = KERN_WARNING; + sevstr = ""; + break; + case MCE_SEV_ERROR_SYNC: + level = KERN_ERR; + sevstr = "Severe"; + break; + case MCE_SEV_FATAL: + default: + level = KERN_ERR; + sevstr = "Fatal"; + break; + } + + printk("%s%s Machine check interrupt [%s]\n", level, sevstr, + evt->disposition == MCE_DISPOSITION_RECOVERED ? + "Recovered" : "[Not recovered"); + printk("%s Initiator: %s\n", level, + evt->initiator == MCE_INITIATOR_CPU ? "CPU" : "Unknown"); + switch (evt->error_type) { + case MCE_ERROR_TYPE_UE: + subtype = evt->u.ue_error.ue_error_type < + ARRAY_SIZE(mc_ue_types) ? + mc_ue_types[evt->u.ue_error.ue_error_type] + : "Unknown"; + printk("%s Error type: UE [%s]\n", level, subtype); + if (evt->u.ue_error.effective_address_provided) + printk("%s Effective address: %016llx\n", + level, evt->u.ue_error.effective_address); + if (evt->u.ue_error.physical_address_provided) + printk("%s Physial address: %016llx\n", + level, evt->u.ue_error.physical_address); + break; + case MCE_ERROR_TYPE_SLB: + subtype = evt->u.slb_error.slb_error_type < + ARRAY_SIZE(mc_slb_types) ? + mc_slb_types[evt->u.slb_error.slb_error_type] + : "Unknown"; + printk("%s Error type: SLB [%s]\n", level, subtype); + if (evt->u.slb_error.effective_address_provided) + printk("%s Effective address: %016llx\n", + level, evt->u.slb_error.effective_address); + break; + case MCE_ERROR_TYPE_ERAT: + subtype = evt->u.erat_error.erat_error_type < + ARRAY_SIZE(mc_erat_types) ? + mc_erat_types[evt->u.erat_error.erat_error_type] + : "Unknown"; + printk("%s Error type: ERAT [%s]\n", level, subtype); + if (evt->u.erat_error.effective_address_provided) + printk("%s Effective address: %016llx\n", + level, evt->u.erat_error.effective_address); + break; + case MCE_ERROR_TYPE_TLB: + subtype = evt->u.tlb_error.tlb_error_type < + ARRAY_SIZE(mc_tlb_types) ? + mc_tlb_types[evt->u.tlb_error.tlb_error_type] + : "Unknown"; + printk("%s Error type: TLB [%s]\n", level, subtype); + if (evt->u.tlb_error.effective_address_provided) + printk("%s Effective address: %016llx\n", + level, evt->u.tlb_error.effective_address); + break; + default: + case MCE_ERROR_TYPE_UNKNOWN: + printk("%s Error type: Unknown\n", level); + break; + } +} + +uint64_t get_mce_fault_addr(struct machine_check_event *evt) +{ + switch (evt->error_type) { + case MCE_ERROR_TYPE_UE: + if (evt->u.ue_error.effective_address_provided) + return evt->u.ue_error.effective_address; + break; + case MCE_ERROR_TYPE_SLB: + if (evt->u.slb_error.effective_address_provided) + return evt->u.slb_error.effective_address; + break; + case MCE_ERROR_TYPE_ERAT: + if (evt->u.erat_error.effective_address_provided) + return evt->u.erat_error.effective_address; + break; + case MCE_ERROR_TYPE_TLB: + if (evt->u.tlb_error.effective_address_provided) + return evt->u.tlb_error.effective_address; + break; + default: + case MCE_ERROR_TYPE_UNKNOWN: + break; + } + return 0; +} +EXPORT_SYMBOL(get_mce_fault_addr); diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c new file mode 100644 index 00000000000..27c93f41166 --- /dev/null +++ b/arch/powerpc/kernel/mce_power.c @@ -0,0 +1,284 @@ +/* + * Machine check exception handling CPU-side for power7 and power8 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2013 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#undef DEBUG +#define pr_fmt(fmt) "mce_power: " fmt + +#include <linux/types.h> +#include <linux/ptrace.h> +#include <asm/mmu.h> +#include <asm/mce.h> + +/* flush SLBs and reload */ +static void flush_and_reload_slb(void) +{ + struct slb_shadow *slb; + unsigned long i, n; + + /* Invalidate all SLBs */ + asm volatile("slbmte %0,%0; slbia" : : "r" (0)); + +#ifdef CONFIG_KVM_BOOK3S_HANDLER + /* + * If machine check is hit when in guest or in transition, we will + * only flush the SLBs and continue. + */ + if (get_paca()->kvm_hstate.in_guest) + return; +#endif + + /* For host kernel, reload the SLBs from shadow SLB buffer. */ + slb = get_slb_shadow(); + if (!slb) + return; + + n = min_t(u32, be32_to_cpu(slb->persistent), SLB_MIN_SIZE); + + /* Load up the SLB entries from shadow SLB */ + for (i = 0; i < n; i++) { + unsigned long rb = be64_to_cpu(slb->save_area[i].esid); + unsigned long rs = be64_to_cpu(slb->save_area[i].vsid); + + rb = (rb & ~0xFFFul) | i; + asm volatile("slbmte %0,%1" : : "r" (rs), "r" (rb)); + } +} + +static long mce_handle_derror(uint64_t dsisr, uint64_t slb_error_bits) +{ + long handled = 1; + + /* + * flush and reload SLBs for SLB errors and flush TLBs for TLB errors. + * reset the error bits whenever we handle them so that at the end + * we can check whether we handled all of them or not. + * */ + if (dsisr & slb_error_bits) { + flush_and_reload_slb(); + /* reset error bits */ + dsisr &= ~(slb_error_bits); + } + if (dsisr & P7_DSISR_MC_TLB_MULTIHIT_MFTLB) { + if (cur_cpu_spec && cur_cpu_spec->flush_tlb) + cur_cpu_spec->flush_tlb(TLBIEL_INVAL_PAGE); + /* reset error bits */ + dsisr &= ~P7_DSISR_MC_TLB_MULTIHIT_MFTLB; + } + /* Any other errors we don't understand? */ + if (dsisr & 0xffffffffUL) + handled = 0; + + return handled; +} + +static long mce_handle_derror_p7(uint64_t dsisr) +{ + return mce_handle_derror(dsisr, P7_DSISR_MC_SLB_ERRORS); +} + +static long mce_handle_common_ierror(uint64_t srr1) +{ + long handled = 0; + + switch (P7_SRR1_MC_IFETCH(srr1)) { + case 0: + break; + case P7_SRR1_MC_IFETCH_SLB_PARITY: + case P7_SRR1_MC_IFETCH_SLB_MULTIHIT: + /* flush and reload SLBs for SLB errors. */ + flush_and_reload_slb(); + handled = 1; + break; + case P7_SRR1_MC_IFETCH_TLB_MULTIHIT: + if (cur_cpu_spec && cur_cpu_spec->flush_tlb) { + cur_cpu_spec->flush_tlb(TLBIEL_INVAL_PAGE); + handled = 1; + } + break; + default: + break; + } + + return handled; +} + +static long mce_handle_ierror_p7(uint64_t srr1) +{ + long handled = 0; + + handled = mce_handle_common_ierror(srr1); + + if (P7_SRR1_MC_IFETCH(srr1) == P7_SRR1_MC_IFETCH_SLB_BOTH) { + flush_and_reload_slb(); + handled = 1; + } + return handled; +} + +static void mce_get_common_ierror(struct mce_error_info *mce_err, uint64_t srr1) +{ + switch (P7_SRR1_MC_IFETCH(srr1)) { + case P7_SRR1_MC_IFETCH_SLB_PARITY: + mce_err->error_type = MCE_ERROR_TYPE_SLB; + mce_err->u.slb_error_type = MCE_SLB_ERROR_PARITY; + break; + case P7_SRR1_MC_IFETCH_SLB_MULTIHIT: + mce_err->error_type = MCE_ERROR_TYPE_SLB; + mce_err->u.slb_error_type = MCE_SLB_ERROR_MULTIHIT; + break; + case P7_SRR1_MC_IFETCH_TLB_MULTIHIT: + mce_err->error_type = MCE_ERROR_TYPE_TLB; + mce_err->u.tlb_error_type = MCE_TLB_ERROR_MULTIHIT; + break; + case P7_SRR1_MC_IFETCH_UE: + case P7_SRR1_MC_IFETCH_UE_IFU_INTERNAL: + mce_err->error_type = MCE_ERROR_TYPE_UE; + mce_err->u.ue_error_type = MCE_UE_ERROR_IFETCH; + break; + case P7_SRR1_MC_IFETCH_UE_TLB_RELOAD: + mce_err->error_type = MCE_ERROR_TYPE_UE; + mce_err->u.ue_error_type = + MCE_UE_ERROR_PAGE_TABLE_WALK_IFETCH; + break; + } +} + +static void mce_get_ierror_p7(struct mce_error_info *mce_err, uint64_t srr1) +{ + mce_get_common_ierror(mce_err, srr1); + if (P7_SRR1_MC_IFETCH(srr1) == P7_SRR1_MC_IFETCH_SLB_BOTH) { + mce_err->error_type = MCE_ERROR_TYPE_SLB; + mce_err->u.slb_error_type = MCE_SLB_ERROR_INDETERMINATE; + } +} + +static void mce_get_derror_p7(struct mce_error_info *mce_err, uint64_t dsisr) +{ + if (dsisr & P7_DSISR_MC_UE) { + mce_err->error_type = MCE_ERROR_TYPE_UE; + mce_err->u.ue_error_type = MCE_UE_ERROR_LOAD_STORE; + } else if (dsisr & P7_DSISR_MC_UE_TABLEWALK) { + mce_err->error_type = MCE_ERROR_TYPE_UE; + mce_err->u.ue_error_type = + MCE_UE_ERROR_PAGE_TABLE_WALK_LOAD_STORE; + } else if (dsisr & P7_DSISR_MC_ERAT_MULTIHIT) { + mce_err->error_type = MCE_ERROR_TYPE_ERAT; + mce_err->u.erat_error_type = MCE_ERAT_ERROR_MULTIHIT; + } else if (dsisr & P7_DSISR_MC_SLB_MULTIHIT) { + mce_err->error_type = MCE_ERROR_TYPE_SLB; + mce_err->u.slb_error_type = MCE_SLB_ERROR_MULTIHIT; + } else if (dsisr & P7_DSISR_MC_SLB_PARITY_MFSLB) { + mce_err->error_type = MCE_ERROR_TYPE_SLB; + mce_err->u.slb_error_type = MCE_SLB_ERROR_PARITY; + } else if (dsisr & P7_DSISR_MC_TLB_MULTIHIT_MFTLB) { + mce_err->error_type = MCE_ERROR_TYPE_TLB; + mce_err->u.tlb_error_type = MCE_TLB_ERROR_MULTIHIT; + } else if (dsisr & P7_DSISR_MC_SLB_MULTIHIT_PARITY) { + mce_err->error_type = MCE_ERROR_TYPE_SLB; + mce_err->u.slb_error_type = MCE_SLB_ERROR_INDETERMINATE; + } +} + +long __machine_check_early_realmode_p7(struct pt_regs *regs) +{ + uint64_t srr1, addr; + long handled = 1; + struct mce_error_info mce_error_info = { 0 }; + + srr1 = regs->msr; + + /* + * Handle memory errors depending whether this was a load/store or + * ifetch exception. Also, populate the mce error_type and + * type-specific error_type from either SRR1 or DSISR, depending + * whether this was a load/store or ifetch exception + */ + if (P7_SRR1_MC_LOADSTORE(srr1)) { + handled = mce_handle_derror_p7(regs->dsisr); + mce_get_derror_p7(&mce_error_info, regs->dsisr); + addr = regs->dar; + } else { + handled = mce_handle_ierror_p7(srr1); + mce_get_ierror_p7(&mce_error_info, srr1); + addr = regs->nip; + } + + save_mce_event(regs, handled, &mce_error_info, addr); + return handled; +} + +static void mce_get_ierror_p8(struct mce_error_info *mce_err, uint64_t srr1) +{ + mce_get_common_ierror(mce_err, srr1); + if (P7_SRR1_MC_IFETCH(srr1) == P8_SRR1_MC_IFETCH_ERAT_MULTIHIT) { + mce_err->error_type = MCE_ERROR_TYPE_ERAT; + mce_err->u.erat_error_type = MCE_ERAT_ERROR_MULTIHIT; + } +} + +static void mce_get_derror_p8(struct mce_error_info *mce_err, uint64_t dsisr) +{ + mce_get_derror_p7(mce_err, dsisr); + if (dsisr & P8_DSISR_MC_ERAT_MULTIHIT_SEC) { + mce_err->error_type = MCE_ERROR_TYPE_ERAT; + mce_err->u.erat_error_type = MCE_ERAT_ERROR_MULTIHIT; + } +} + +static long mce_handle_ierror_p8(uint64_t srr1) +{ + long handled = 0; + + handled = mce_handle_common_ierror(srr1); + + if (P7_SRR1_MC_IFETCH(srr1) == P8_SRR1_MC_IFETCH_ERAT_MULTIHIT) { + flush_and_reload_slb(); + handled = 1; + } + return handled; +} + +static long mce_handle_derror_p8(uint64_t dsisr) +{ + return mce_handle_derror(dsisr, P8_DSISR_MC_SLB_ERRORS); +} + +long __machine_check_early_realmode_p8(struct pt_regs *regs) +{ + uint64_t srr1, addr; + long handled = 1; + struct mce_error_info mce_error_info = { 0 }; + + srr1 = regs->msr; + + if (P7_SRR1_MC_LOADSTORE(srr1)) { + handled = mce_handle_derror_p8(regs->dsisr); + mce_get_derror_p8(&mce_error_info, regs->dsisr); + addr = regs->dar; + } else { + handled = mce_handle_ierror_p8(srr1); + mce_get_ierror_p8(&mce_error_info, srr1); + addr = regs->nip; + } + + save_mce_event(regs, handled, &mce_error_info, addr); + return handled; +} diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index e47d268727a..7c6bb4b17b4 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -57,11 +57,14 @@ _GLOBAL(call_do_softirq) mtlr r0 blr +/* + * void call_do_irq(struct pt_regs *regs, struct thread_info *irqtp); + */ _GLOBAL(call_do_irq) mflr r0 stw r0,4(r1) lwz r10,THREAD+KSP_LIMIT(r2) - addi r11,r3,THREAD_INFO_GAP + addi r11,r4,THREAD_INFO_GAP stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4) mr r1,r4 stw r10,8(r1) @@ -344,7 +347,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE) */ _KPROBE(flush_icache_range) BEGIN_FTR_SECTION - isync + PURGE_PREFETCHED_INS blr /* for 601, do nothing */ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) li r5,L1_CACHE_BYTES-1 @@ -448,6 +451,7 @@ _GLOBAL(invalidate_dcache_range) */ _GLOBAL(__flush_dcache_icache) BEGIN_FTR_SECTION + PURGE_PREFETCHED_INS blr END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */ @@ -489,6 +493,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x) */ _GLOBAL(__flush_dcache_icache_phys) BEGIN_FTR_SECTION + PURGE_PREFETCHED_INS blr /* for 601, do nothing */ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) mfmsr r10 diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 64bf8db12b1..3d0249599d5 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -67,6 +67,7 @@ PPC64_CACHES: _KPROBE(flush_icache_range) BEGIN_FTR_SECTION + PURGE_PREFETCHED_INS blr END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) /* @@ -211,6 +212,11 @@ _GLOBAL(__flush_dcache_icache) * Different systems have different cache line sizes */ +BEGIN_FTR_SECTION + PURGE_PREFETCHED_INS + blr +END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) + /* Flush the dcache */ ld r7,PPC64_CACHES@toc(r2) clrrdi r3,r3,PAGE_SHIFT /* Page align */ diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 0620eaaaad4..bf0aada02fe 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -99,12 +99,28 @@ static inline void free_lppacas(void) { } * 3 persistent SLBs are registered here. The buffer will be zero * initially, hence will all be invaild until we actually write them. */ -struct slb_shadow slb_shadow[] __cacheline_aligned = { - [0 ... (NR_CPUS-1)] = { - .persistent = cpu_to_be32(SLB_NUM_BOLTED), - .buffer_length = cpu_to_be32(sizeof(struct slb_shadow)), - }, -}; +static struct slb_shadow *slb_shadow; + +static void __init allocate_slb_shadows(int nr_cpus, int limit) +{ + int size = PAGE_ALIGN(sizeof(struct slb_shadow) * nr_cpus); + slb_shadow = __va(memblock_alloc_base(size, PAGE_SIZE, limit)); + memset(slb_shadow, 0, size); +} + +static struct slb_shadow * __init init_slb_shadow(int cpu) +{ + struct slb_shadow *s = &slb_shadow[cpu]; + + s->persistent = cpu_to_be32(SLB_NUM_BOLTED); + s->buffer_length = cpu_to_be32(sizeof(*s)); + + return s; +} + +#else /* CONFIG_PPC_STD_MMU_64 */ + +static void __init allocate_slb_shadows(int nr_cpus, int limit) { } #endif /* CONFIG_PPC_STD_MMU_64 */ @@ -142,8 +158,13 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu) new_paca->__current = &init_task; new_paca->data_offset = 0xfeeeeeeeeeeeeeeeULL; #ifdef CONFIG_PPC_STD_MMU_64 - new_paca->slb_shadow_ptr = &slb_shadow[cpu]; + new_paca->slb_shadow_ptr = init_slb_shadow(cpu); #endif /* CONFIG_PPC_STD_MMU_64 */ + +#ifdef CONFIG_PPC_BOOK3E + /* For now -- if we have threads this will be adjusted later */ + new_paca->tcd_ptr = &new_paca->tcd; +#endif } /* Put the paca pointer into r13 and SPRG_PACA */ @@ -190,6 +211,8 @@ void __init allocate_pacas(void) allocate_lppacas(nr_cpu_ids, limit); + allocate_slb_shadows(nr_cpu_ids, limit); + /* Can't use for_each_*_cpu, as they aren't functional yet */ for (cpu = 0; cpu < nr_cpu_ids; cpu++) initialise_paca(&paca[cpu], cpu); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 4a96556fd2d..af064d28b36 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -25,7 +25,6 @@ #include <linux/slab.h> #include <linux/user.h> #include <linux/elf.h> -#include <linux/init.h> #include <linux/prctl.h> #include <linux/init_task.h> #include <linux/export.h> @@ -74,6 +73,48 @@ struct task_struct *last_task_used_vsx = NULL; struct task_struct *last_task_used_spe = NULL; #endif +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +void giveup_fpu_maybe_transactional(struct task_struct *tsk) +{ + /* + * If we are saving the current thread's registers, and the + * thread is in a transactional state, set the TIF_RESTORE_TM + * bit so that we know to restore the registers before + * returning to userspace. + */ + if (tsk == current && tsk->thread.regs && + MSR_TM_ACTIVE(tsk->thread.regs->msr) && + !test_thread_flag(TIF_RESTORE_TM)) { + tsk->thread.tm_orig_msr = tsk->thread.regs->msr; + set_thread_flag(TIF_RESTORE_TM); + } + + giveup_fpu(tsk); +} + +void giveup_altivec_maybe_transactional(struct task_struct *tsk) +{ + /* + * If we are saving the current thread's registers, and the + * thread is in a transactional state, set the TIF_RESTORE_TM + * bit so that we know to restore the registers before + * returning to userspace. + */ + if (tsk == current && tsk->thread.regs && + MSR_TM_ACTIVE(tsk->thread.regs->msr) && + !test_thread_flag(TIF_RESTORE_TM)) { + tsk->thread.tm_orig_msr = tsk->thread.regs->msr; + set_thread_flag(TIF_RESTORE_TM); + } + + giveup_altivec(tsk); +} + +#else +#define giveup_fpu_maybe_transactional(tsk) giveup_fpu(tsk) +#define giveup_altivec_maybe_transactional(tsk) giveup_altivec(tsk) +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ + #ifdef CONFIG_PPC_FPU /* * Make sure the floating-point register state in the @@ -102,13 +143,13 @@ void flush_fp_to_thread(struct task_struct *tsk) */ BUG_ON(tsk != current); #endif - giveup_fpu(tsk); + giveup_fpu_maybe_transactional(tsk); } preempt_enable(); } } EXPORT_SYMBOL_GPL(flush_fp_to_thread); -#endif +#endif /* CONFIG_PPC_FPU */ void enable_kernel_fp(void) { @@ -116,11 +157,11 @@ void enable_kernel_fp(void) #ifdef CONFIG_SMP if (current->thread.regs && (current->thread.regs->msr & MSR_FP)) - giveup_fpu(current); + giveup_fpu_maybe_transactional(current); else giveup_fpu(NULL); /* just enables FP for kernel */ #else - giveup_fpu(last_task_used_math); + giveup_fpu_maybe_transactional(last_task_used_math); #endif /* CONFIG_SMP */ } EXPORT_SYMBOL(enable_kernel_fp); @@ -132,11 +173,11 @@ void enable_kernel_altivec(void) #ifdef CONFIG_SMP if (current->thread.regs && (current->thread.regs->msr & MSR_VEC)) - giveup_altivec(current); + giveup_altivec_maybe_transactional(current); else giveup_altivec_notask(); #else - giveup_altivec(last_task_used_altivec); + giveup_altivec_maybe_transactional(last_task_used_altivec); #endif /* CONFIG_SMP */ } EXPORT_SYMBOL(enable_kernel_altivec); @@ -153,7 +194,7 @@ void flush_altivec_to_thread(struct task_struct *tsk) #ifdef CONFIG_SMP BUG_ON(tsk != current); #endif - giveup_altivec(tsk); + giveup_altivec_maybe_transactional(tsk); } preempt_enable(); } @@ -182,8 +223,8 @@ EXPORT_SYMBOL(enable_kernel_vsx); void giveup_vsx(struct task_struct *tsk) { - giveup_fpu(tsk); - giveup_altivec(tsk); + giveup_fpu_maybe_transactional(tsk); + giveup_altivec_maybe_transactional(tsk); __giveup_vsx(tsk); } @@ -479,7 +520,48 @@ static inline bool hw_brk_match(struct arch_hw_breakpoint *a, return false; return true; } + #ifdef CONFIG_PPC_TRANSACTIONAL_MEM +static void tm_reclaim_thread(struct thread_struct *thr, + struct thread_info *ti, uint8_t cause) +{ + unsigned long msr_diff = 0; + + /* + * If FP/VSX registers have been already saved to the + * thread_struct, move them to the transact_fp array. + * We clear the TIF_RESTORE_TM bit since after the reclaim + * the thread will no longer be transactional. + */ + if (test_ti_thread_flag(ti, TIF_RESTORE_TM)) { + msr_diff = thr->tm_orig_msr & ~thr->regs->msr; + if (msr_diff & MSR_FP) + memcpy(&thr->transact_fp, &thr->fp_state, + sizeof(struct thread_fp_state)); + if (msr_diff & MSR_VEC) + memcpy(&thr->transact_vr, &thr->vr_state, + sizeof(struct thread_vr_state)); + clear_ti_thread_flag(ti, TIF_RESTORE_TM); + msr_diff &= MSR_FP | MSR_VEC | MSR_VSX | MSR_FE0 | MSR_FE1; + } + + tm_reclaim(thr, thr->regs->msr, cause); + + /* Having done the reclaim, we now have the checkpointed + * FP/VSX values in the registers. These might be valid + * even if we have previously called enable_kernel_fp() or + * flush_fp_to_thread(), so update thr->regs->msr to + * indicate their current validity. + */ + thr->regs->msr |= msr_diff; +} + +void tm_reclaim_current(uint8_t cause) +{ + tm_enable(); + tm_reclaim_thread(¤t->thread, current_thread_info(), cause); +} + static inline void tm_reclaim_task(struct task_struct *tsk) { /* We have to work out if we're switching from/to a task that's in the @@ -502,9 +584,11 @@ static inline void tm_reclaim_task(struct task_struct *tsk) /* Stash the original thread MSR, as giveup_fpu et al will * modify it. We hold onto it to see whether the task used - * FP & vector regs. + * FP & vector regs. If the TIF_RESTORE_TM flag is set, + * tm_orig_msr is already set. */ - thr->tm_orig_msr = thr->regs->msr; + if (!test_ti_thread_flag(task_thread_info(tsk), TIF_RESTORE_TM)) + thr->tm_orig_msr = thr->regs->msr; TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, " "ccr=%lx, msr=%lx, trap=%lx)\n", @@ -512,7 +596,7 @@ static inline void tm_reclaim_task(struct task_struct *tsk) thr->regs->ccr, thr->regs->msr, thr->regs->trap); - tm_reclaim(thr, thr->regs->msr, TM_CAUSE_RESCHED); + tm_reclaim_thread(thr, task_thread_info(tsk), TM_CAUSE_RESCHED); TM_DEBUG("--- tm_reclaim on pid %d complete\n", tsk->pid); @@ -588,6 +672,43 @@ static inline void __switch_to_tm(struct task_struct *prev) tm_reclaim_task(prev); } } + +/* + * This is called if we are on the way out to userspace and the + * TIF_RESTORE_TM flag is set. It checks if we need to reload + * FP and/or vector state and does so if necessary. + * If userspace is inside a transaction (whether active or + * suspended) and FP/VMX/VSX instructions have ever been enabled + * inside that transaction, then we have to keep them enabled + * and keep the FP/VMX/VSX state loaded while ever the transaction + * continues. The reason is that if we didn't, and subsequently + * got a FP/VMX/VSX unavailable interrupt inside a transaction, + * we don't know whether it's the same transaction, and thus we + * don't know which of the checkpointed state and the transactional + * state to use. + */ +void restore_tm_state(struct pt_regs *regs) +{ + unsigned long msr_diff; + + clear_thread_flag(TIF_RESTORE_TM); + if (!MSR_TM_ACTIVE(regs->msr)) + return; + + msr_diff = current->thread.tm_orig_msr & ~regs->msr; + msr_diff &= MSR_FP | MSR_VEC | MSR_VSX; + if (msr_diff & MSR_FP) { + fp_enable(); + load_fp_state(¤t->thread.fp_state); + regs->msr |= current->thread.fpexc_mode; + } + if (msr_diff & MSR_VEC) { + vec_enable(); + load_vr_state(¤t->thread.vr_state); + } + regs->msr |= msr_diff; +} + #else #define tm_recheckpoint_new_task(new) #define __switch_to_tm(prev) @@ -690,7 +811,7 @@ struct task_struct *__switch_to(struct task_struct *prev, * schedule DABR */ #ifndef CONFIG_HAVE_HW_BREAKPOINT - if (unlikely(hw_brk_match(&__get_cpu_var(current_brk), &new->thread.hw_brk))) + if (unlikely(!hw_brk_match(&__get_cpu_var(current_brk), &new->thread.hw_brk))) set_breakpoint(&new->thread.hw_brk); #endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif @@ -927,6 +1048,15 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) flush_altivec_to_thread(src); flush_vsx_to_thread(src); flush_spe_to_thread(src); + /* + * Flush TM state out so we can copy it. __switch_to_tm() does this + * flush but it removes the checkpointed state from the current CPU and + * transitions the CPU out of TM mode. Hence we need to call + * tm_recheckpoint_new_task() (on the same task) to restore the + * checkpointed state back and the TM mode. + */ + __switch_to_tm(src); + tm_recheckpoint_new_task(src); *dst = *src; @@ -1175,6 +1305,19 @@ int set_fpexc_mode(struct task_struct *tsk, unsigned int val) if (val & PR_FP_EXC_SW_ENABLE) { #ifdef CONFIG_SPE if (cpu_has_feature(CPU_FTR_SPE)) { + /* + * When the sticky exception bits are set + * directly by userspace, it must call prctl + * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE + * in the existing prctl settings) or + * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in + * the bits being set). <fenv.h> functions + * saving and restoring the whole + * floating-point environment need to do so + * anyway to restore the prctl settings from + * the saved environment. + */ + tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR); tsk->thread.fpexc_mode = val & (PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT); return 0; @@ -1206,9 +1349,22 @@ int get_fpexc_mode(struct task_struct *tsk, unsigned long adr) if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) #ifdef CONFIG_SPE - if (cpu_has_feature(CPU_FTR_SPE)) + if (cpu_has_feature(CPU_FTR_SPE)) { + /* + * When the sticky exception bits are set + * directly by userspace, it must call prctl + * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE + * in the existing prctl settings) or + * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in + * the bits being set). <fenv.h> functions + * saving and restoring the whole + * floating-point environment need to do so + * anyway to restore the prctl settings from + * the saved environment. + */ + tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR); val = tsk->thread.fpexc_mode; - else + } else return -EINVAL; #else return -EINVAL; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index fa0ad8aafbc..f58c0d3aaeb 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -523,6 +523,20 @@ static int __init early_init_dt_scan_memory_ppc(unsigned long node, return early_init_dt_scan_memory(node, uname, depth, data); } +/* + * For a relocatable kernel, we need to get the memstart_addr first, + * then use it to calculate the virtual kernel start address. This has + * to happen at a very early stage (before machine_init). In this case, + * we just want to get the memstart_address and would not like to mess the + * memblock at this stage. So introduce a variable to skip the memblock_add() + * for this reason. + */ +#ifdef CONFIG_RELOCATABLE +static int add_mem_to_memblock = 1; +#else +#define add_mem_to_memblock 1 +#endif + void __init early_init_dt_add_memory_arch(u64 base, u64 size) { #ifdef CONFIG_PPC64 @@ -543,7 +557,8 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) } /* Add the chunk to the MEMBLOCK list */ - memblock_add(base, size); + if (add_mem_to_memblock) + memblock_add(base, size); } static void __init early_reserve_mem_dt(void) @@ -740,6 +755,30 @@ void __init early_init_devtree(void *params) DBG(" <- early_init_devtree()\n"); } +#ifdef CONFIG_RELOCATABLE +/* + * This function run before early_init_devtree, so we have to init + * initial_boot_params. + */ +void __init early_get_first_memblock_info(void *params, phys_addr_t *size) +{ + /* Setup flat device-tree pointer */ + initial_boot_params = params; + + /* + * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid + * mess the memblock. + */ + add_mem_to_memblock = 0; + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); + add_mem_to_memblock = 1; + + if (size) + *size = first_memblock_size; +} +#endif + /******* * * New implementation of the OF "find" APIs, return a refcounted diff --git a/arch/powerpc/kernel/reloc_64.S b/arch/powerpc/kernel/reloc_64.S index b47a0e1ab00..d88736fbece 100644 --- a/arch/powerpc/kernel/reloc_64.S +++ b/arch/powerpc/kernel/reloc_64.S @@ -69,8 +69,8 @@ _GLOBAL(relocate) * R_PPC64_RELATIVE ones. */ mtctr r8 -5: lwz r0,12(9) /* ELF64_R_TYPE(reloc->r_info) */ - cmpwi r0,R_PPC64_RELATIVE +5: ld r0,8(9) /* ELF64_R_TYPE(reloc->r_info) */ + cmpdi r0,R_PPC64_RELATIVE bne 6f ld r6,0(r9) /* reloc->r_offset */ ld r0,16(r9) /* reloc->r_addend */ @@ -81,6 +81,7 @@ _GLOBAL(relocate) 6: blr +.balign 8 p_dyn: .llong __dynamic_start - 0b p_rela: .llong __rela_dyn_start - 0b p_st: .llong _stext - 0b diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 2b0da27eaee..04cc4fcca78 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -247,7 +247,12 @@ static void __init exc_lvl_early_init(void) /* interrupt stacks must be in lowmem, we get that for free on ppc32 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */ for_each_possible_cpu(i) { +#ifdef CONFIG_SMP hw_cpu = get_hard_smp_processor_id(i); +#else + hw_cpu = 0; +#endif + critirq_ctx[hw_cpu] = (struct thread_info *) __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE)); #ifdef CONFIG_BOOKE diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 856dd4e99bf..f5f11a7d30e 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -97,6 +97,36 @@ int dcache_bsize; int icache_bsize; int ucache_bsize; +#if defined(CONFIG_PPC_BOOK3E) && defined(CONFIG_SMP) +static void setup_tlb_core_data(void) +{ + int cpu; + + for_each_possible_cpu(cpu) { + int first = cpu_first_thread_sibling(cpu); + + paca[cpu].tcd_ptr = &paca[first].tcd; + + /* + * If we have threads, we need either tlbsrx. + * or e6500 tablewalk mode, or else TLB handlers + * will be racy and could produce duplicate entries. + */ + if (smt_enabled_at_boot >= 2 && + !mmu_has_feature(MMU_FTR_USE_TLBRSRV) && + book3e_htw_mode != PPC_HTW_E6500) { + /* Should we panic instead? */ + WARN_ONCE("%s: unsupported MMU configuration -- expect problems\n", + __func__); + } + } +} +#else +static void setup_tlb_core_data(void) +{ +} +#endif + #ifdef CONFIG_SMP static char *smt_enabled_cmdline; @@ -445,6 +475,7 @@ void __init setup_system(void) smp_setup_cpu_maps(); check_smt_enabled(); + setup_tlb_core_data(); #ifdef CONFIG_SMP /* Release secondary cpus out of their spinloops at 0x60 now that @@ -520,9 +551,6 @@ static void __init irqstack_early_init(void) #ifdef CONFIG_PPC_BOOK3E static void __init exc_lvl_early_init(void) { - extern unsigned int interrupt_base_book3e; - extern unsigned int exc_debug_debug_book3e; - unsigned int i; for_each_possible_cpu(i) { @@ -535,8 +563,7 @@ static void __init exc_lvl_early_init(void) } if (cpu_has_feature(CPU_FTR_DEBUG_LVL_EXC)) - patch_branch(&interrupt_base_book3e + (0x040 / 4) + 1, - (unsigned long)&exc_debug_debug_book3e, 0); + patch_exception(0x040, exc_debug_debug_book3e); } #else #define exc_lvl_early_init() @@ -544,7 +571,8 @@ static void __init exc_lvl_early_init(void) /* * Stack space used when we detect a bad kernel stack pointer, and - * early in SMP boots before relocation is enabled. + * early in SMP boots before relocation is enabled. Exclusive emergency + * stack for machine checks. */ static void __init emergency_stack_init(void) { @@ -567,6 +595,13 @@ static void __init emergency_stack_init(void) sp = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit); sp += THREAD_SIZE; paca[i].emergency_sp = __va(sp); + +#ifdef CONFIG_PPC_BOOK3S_64 + /* emergency stack for machine check exception handling. */ + sp = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit); + sp += THREAD_SIZE; + paca[i].mc_emergency_sp = __va(sp); +#endif } } diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 457e97aa294..8fc4177ed65 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -203,8 +203,7 @@ unsigned long get_tm_stackpointer(struct pt_regs *regs) #ifdef CONFIG_PPC_TRANSACTIONAL_MEM if (MSR_TM_ACTIVE(regs->msr)) { - tm_enable(); - tm_reclaim(¤t->thread, regs->msr, TM_CAUSE_SIGNAL); + tm_reclaim_current(TM_CAUSE_SIGNAL); if (MSR_TM_TRANSACTIONAL(regs->msr)) return current->thread.ckpt_regs.gpr[1]; } diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 68027bfa5f8..a67e00aa3ca 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -519,6 +519,13 @@ static int save_tm_user_regs(struct pt_regs *regs, { unsigned long msr = regs->msr; + /* Remove TM bits from thread's MSR. The MSR in the sigcontext + * just indicates to userland that we were doing a transaction, but we + * don't want to return in transactional state. This also ensures + * that flush_fp_to_thread won't set TIF_RESTORE_TM again. + */ + regs->msr &= ~MSR_TS_MASK; + /* Make sure floating point registers are stored in regs */ flush_fp_to_thread(current); @@ -1015,29 +1022,24 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, #ifdef CONFIG_PPC_TRANSACTIONAL_MEM tm_frame = &rt_sf->uc_transact.uc_mcontext; if (MSR_TM_ACTIVE(regs->msr)) { + if (__put_user((unsigned long)&rt_sf->uc_transact, + &rt_sf->uc.uc_link) || + __put_user((unsigned long)tm_frame, + &rt_sf->uc_transact.uc_regs)) + goto badframe; if (save_tm_user_regs(regs, frame, tm_frame, sigret)) goto badframe; } else #endif { + if (__put_user(0, &rt_sf->uc.uc_link)) + goto badframe; if (save_user_regs(regs, frame, tm_frame, sigret, 1)) goto badframe; } regs->link = tramp; -#ifdef CONFIG_PPC_TRANSACTIONAL_MEM - if (MSR_TM_ACTIVE(regs->msr)) { - if (__put_user((unsigned long)&rt_sf->uc_transact, - &rt_sf->uc.uc_link) - || __put_user((unsigned long)tm_frame, &rt_sf->uc_transact.uc_regs)) - goto badframe; - } - else -#endif - if (__put_user(0, &rt_sf->uc.uc_link)) - goto badframe; - current->thread.fp_state.fpscr = 0; /* turn off all fp exceptions */ /* create a stack frame for the caller of the handler */ @@ -1056,13 +1058,6 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, /* enter the signal handler in native-endian mode */ regs->msr &= ~MSR_LE; regs->msr |= (MSR_KERNEL & MSR_LE); -#ifdef CONFIG_PPC_TRANSACTIONAL_MEM - /* Remove TM bits from thread's MSR. The MSR in the sigcontext - * just indicates to userland that we were doing a transaction, but we - * don't want to return in transactional state: - */ - regs->msr &= ~MSR_TS_MASK; -#endif return 1; badframe: @@ -1484,13 +1479,6 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka, regs->nip = (unsigned long) ka->sa.sa_handler; /* enter the signal handler in big-endian mode */ regs->msr &= ~MSR_LE; -#ifdef CONFIG_PPC_TRANSACTIONAL_MEM - /* Remove TM bits from thread's MSR. The MSR in the sigcontext - * just indicates to userland that we were doing a transaction, but we - * don't want to return in transactional state: - */ - regs->msr &= ~MSR_TS_MASK; -#endif return 1; badframe: diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 42991045349..8d253c29649 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -65,8 +65,8 @@ struct rt_sigframe { struct siginfo __user *pinfo; void __user *puc; struct siginfo info; - /* 64 bit ABI allows for 288 bytes below sp before decrementing it. */ - char abigap[288]; + /* New 64 bit little-endian ABI allows redzone of 512 bytes below sp */ + char abigap[USER_REDZONE_SIZE]; } __attribute__ ((aligned (16))); static const char fmt32[] = KERN_INFO \ @@ -192,6 +192,13 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc, BUG_ON(!MSR_TM_ACTIVE(regs->msr)); + /* Remove TM bits from thread's MSR. The MSR in the sigcontext + * just indicates to userland that we were doing a transaction, but we + * don't want to return in transactional state. This also ensures + * that flush_fp_to_thread won't set TIF_RESTORE_TM again. + */ + regs->msr &= ~MSR_TS_MASK; + flush_fp_to_thread(current); #ifdef CONFIG_ALTIVEC @@ -749,13 +756,6 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, /* Make sure signal handler doesn't get spurious FP exceptions */ current->thread.fp_state.fpscr = 0; -#ifdef CONFIG_PPC_TRANSACTIONAL_MEM - /* Remove TM bits from thread's MSR. The MSR in the sigcontext - * just indicates to userland that we were doing a transaction, but we - * don't want to return in transactional state: - */ - regs->msr &= ~MSR_TS_MASK; -#endif /* Set up to return from userspace. */ if (vdso64_rt_sigtramp && current->mm->context.vdso_base) { diff --git a/arch/powerpc/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c index e68fd1ae727..7a37ecd3afa 100644 --- a/arch/powerpc/kernel/smp-tbsync.c +++ b/arch/powerpc/kernel/smp-tbsync.c @@ -9,7 +9,6 @@ #include <linux/sched.h> #include <linux/smp.h> #include <linux/unistd.h> -#include <linux/init.h> #include <linux/slab.h> #include <linux/atomic.h> #include <asm/smp.h> diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index c1cf4a1522d..ac2621af315 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -369,13 +369,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) cpumask_set_cpu(boot_cpuid, cpu_sibling_mask(boot_cpuid)); cpumask_set_cpu(boot_cpuid, cpu_core_mask(boot_cpuid)); - if (smp_ops) - if (smp_ops->probe) - max_cpus = smp_ops->probe(); - else - max_cpus = NR_CPUS; - else - max_cpus = 1; + if (smp_ops && smp_ops->probe) + smp_ops->probe(); } void smp_prepare_boot_cpu(void) diff --git a/arch/powerpc/kernel/swsusp_booke.S b/arch/powerpc/kernel/swsusp_booke.S index 0f204053e5b..553c1405ee0 100644 --- a/arch/powerpc/kernel/swsusp_booke.S +++ b/arch/powerpc/kernel/swsusp_booke.S @@ -74,21 +74,21 @@ _GLOBAL(swsusp_arch_suspend) bne 1b /* Save SPRGs */ - mfsprg r4,0 + mfspr r4,SPRN_SPRG0 stw r4,SL_SPRG0(r11) - mfsprg r4,1 + mfspr r4,SPRN_SPRG1 stw r4,SL_SPRG1(r11) - mfsprg r4,2 + mfspr r4,SPRN_SPRG2 stw r4,SL_SPRG2(r11) - mfsprg r4,3 + mfspr r4,SPRN_SPRG3 stw r4,SL_SPRG3(r11) - mfsprg r4,4 + mfspr r4,SPRN_SPRG4 stw r4,SL_SPRG4(r11) - mfsprg r4,5 + mfspr r4,SPRN_SPRG5 stw r4,SL_SPRG5(r11) - mfsprg r4,6 + mfspr r4,SPRN_SPRG6 stw r4,SL_SPRG6(r11) - mfsprg r4,7 + mfspr r4,SPRN_SPRG7 stw r4,SL_SPRG7(r11) /* Call the low level suspend stuff (we should probably have made @@ -150,21 +150,21 @@ _GLOBAL(swsusp_arch_resume) bl _tlbil_all lwz r4,SL_SPRG0(r11) - mtsprg 0,r4 + mtspr SPRN_SPRG0,r4 lwz r4,SL_SPRG1(r11) - mtsprg 1,r4 + mtspr SPRN_SPRG1,r4 lwz r4,SL_SPRG2(r11) - mtsprg 2,r4 + mtspr SPRN_SPRG2,r4 lwz r4,SL_SPRG3(r11) - mtsprg 3,r4 + mtspr SPRN_SPRG3,r4 lwz r4,SL_SPRG4(r11) - mtsprg 4,r4 + mtspr SPRN_SPRG4,r4 lwz r4,SL_SPRG5(r11) - mtsprg 5,r4 + mtspr SPRN_SPRG5,r4 lwz r4,SL_SPRG6(r11) - mtsprg 6,r4 + mtspr SPRN_SPRG6,r4 lwz r4,SL_SPRG7(r11) - mtsprg 7,r4 + mtspr SPRN_SPRG7,r4 /* restore the MSR */ lwz r3,SL_MSR(r11) diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 4e3cc47f26b..cd9be9aa016 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -34,7 +34,6 @@ #include <linux/ipc.h> #include <linux/utsname.h> #include <linux/file.h> -#include <linux/init.h> #include <linux/personality.h> #include <asm/uaccess.h> diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index b4e667663d9..97e1dc91768 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -51,8 +51,6 @@ static ssize_t store_smt_snooze_delay(struct device *dev, return -EINVAL; per_cpu(smt_snooze_delay, cpu->dev.id) = snooze; - update_smt_snooze_delay(cpu->dev.id, snooze); - return count; } @@ -86,6 +84,304 @@ __setup("smt-snooze-delay=", setup_smt_snooze_delay); #endif /* CONFIG_PPC64 */ +#ifdef CONFIG_PPC_FSL_BOOK3E +#define MAX_BIT 63 + +static u64 pw20_wt; +static u64 altivec_idle_wt; + +static unsigned int get_idle_ticks_bit(u64 ns) +{ + u64 cycle; + + if (ns >= 10000) + cycle = div_u64(ns + 500, 1000) * tb_ticks_per_usec; + else + cycle = div_u64(ns * tb_ticks_per_usec, 1000); + + if (!cycle) + return 0; + + return ilog2(cycle); +} + +static void do_show_pwrmgtcr0(void *val) +{ + u32 *value = val; + + *value = mfspr(SPRN_PWRMGTCR0); +} + +static ssize_t show_pw20_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 value; + unsigned int cpu = dev->id; + + smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1); + + value &= PWRMGTCR0_PW20_WAIT; + + return sprintf(buf, "%u\n", value ? 1 : 0); +} + +static void do_store_pw20_state(void *val) +{ + u32 *value = val; + u32 pw20_state; + + pw20_state = mfspr(SPRN_PWRMGTCR0); + + if (*value) + pw20_state |= PWRMGTCR0_PW20_WAIT; + else + pw20_state &= ~PWRMGTCR0_PW20_WAIT; + + mtspr(SPRN_PWRMGTCR0, pw20_state); +} + +static ssize_t store_pw20_state(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 value; + unsigned int cpu = dev->id; + + if (kstrtou32(buf, 0, &value)) + return -EINVAL; + + if (value > 1) + return -EINVAL; + + smp_call_function_single(cpu, do_store_pw20_state, &value, 1); + + return count; +} + +static ssize_t show_pw20_wait_time(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 value; + u64 tb_cycle = 1; + u64 time; + + unsigned int cpu = dev->id; + + if (!pw20_wt) { + smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1); + value = (value & PWRMGTCR0_PW20_ENT) >> + PWRMGTCR0_PW20_ENT_SHIFT; + + tb_cycle = (tb_cycle << (MAX_BIT - value + 1)); + /* convert ms to ns */ + if (tb_ticks_per_usec > 1000) { + time = div_u64(tb_cycle, tb_ticks_per_usec / 1000); + } else { + u32 rem_us; + + time = div_u64_rem(tb_cycle, tb_ticks_per_usec, + &rem_us); + time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec; + } + } else { + time = pw20_wt; + } + + return sprintf(buf, "%llu\n", time > 0 ? time : 0); +} + +static void set_pw20_wait_entry_bit(void *val) +{ + u32 *value = val; + u32 pw20_idle; + + pw20_idle = mfspr(SPRN_PWRMGTCR0); + + /* Set Automatic PW20 Core Idle Count */ + /* clear count */ + pw20_idle &= ~PWRMGTCR0_PW20_ENT; + + /* set count */ + pw20_idle |= ((MAX_BIT - *value) << PWRMGTCR0_PW20_ENT_SHIFT); + + mtspr(SPRN_PWRMGTCR0, pw20_idle); +} + +static ssize_t store_pw20_wait_time(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 entry_bit; + u64 value; + + unsigned int cpu = dev->id; + + if (kstrtou64(buf, 0, &value)) + return -EINVAL; + + if (!value) + return -EINVAL; + + entry_bit = get_idle_ticks_bit(value); + if (entry_bit > MAX_BIT) + return -EINVAL; + + pw20_wt = value; + + smp_call_function_single(cpu, set_pw20_wait_entry_bit, + &entry_bit, 1); + + return count; +} + +static ssize_t show_altivec_idle(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 value; + unsigned int cpu = dev->id; + + smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1); + + value &= PWRMGTCR0_AV_IDLE_PD_EN; + + return sprintf(buf, "%u\n", value ? 1 : 0); +} + +static void do_store_altivec_idle(void *val) +{ + u32 *value = val; + u32 altivec_idle; + + altivec_idle = mfspr(SPRN_PWRMGTCR0); + + if (*value) + altivec_idle |= PWRMGTCR0_AV_IDLE_PD_EN; + else + altivec_idle &= ~PWRMGTCR0_AV_IDLE_PD_EN; + + mtspr(SPRN_PWRMGTCR0, altivec_idle); +} + +static ssize_t store_altivec_idle(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 value; + unsigned int cpu = dev->id; + + if (kstrtou32(buf, 0, &value)) + return -EINVAL; + + if (value > 1) + return -EINVAL; + + smp_call_function_single(cpu, do_store_altivec_idle, &value, 1); + + return count; +} + +static ssize_t show_altivec_idle_wait_time(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 value; + u64 tb_cycle = 1; + u64 time; + + unsigned int cpu = dev->id; + + if (!altivec_idle_wt) { + smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1); + value = (value & PWRMGTCR0_AV_IDLE_CNT) >> + PWRMGTCR0_AV_IDLE_CNT_SHIFT; + + tb_cycle = (tb_cycle << (MAX_BIT - value + 1)); + /* convert ms to ns */ + if (tb_ticks_per_usec > 1000) { + time = div_u64(tb_cycle, tb_ticks_per_usec / 1000); + } else { + u32 rem_us; + + time = div_u64_rem(tb_cycle, tb_ticks_per_usec, + &rem_us); + time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec; + } + } else { + time = altivec_idle_wt; + } + + return sprintf(buf, "%llu\n", time > 0 ? time : 0); +} + +static void set_altivec_idle_wait_entry_bit(void *val) +{ + u32 *value = val; + u32 altivec_idle; + + altivec_idle = mfspr(SPRN_PWRMGTCR0); + + /* Set Automatic AltiVec Idle Count */ + /* clear count */ + altivec_idle &= ~PWRMGTCR0_AV_IDLE_CNT; + + /* set count */ + altivec_idle |= ((MAX_BIT - *value) << PWRMGTCR0_AV_IDLE_CNT_SHIFT); + + mtspr(SPRN_PWRMGTCR0, altivec_idle); +} + +static ssize_t store_altivec_idle_wait_time(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 entry_bit; + u64 value; + + unsigned int cpu = dev->id; + + if (kstrtou64(buf, 0, &value)) + return -EINVAL; + + if (!value) + return -EINVAL; + + entry_bit = get_idle_ticks_bit(value); + if (entry_bit > MAX_BIT) + return -EINVAL; + + altivec_idle_wt = value; + + smp_call_function_single(cpu, set_altivec_idle_wait_entry_bit, + &entry_bit, 1); + + return count; +} + +/* + * Enable/Disable interface: + * 0, disable. 1, enable. + */ +static DEVICE_ATTR(pw20_state, 0600, show_pw20_state, store_pw20_state); +static DEVICE_ATTR(altivec_idle, 0600, show_altivec_idle, store_altivec_idle); + +/* + * Set wait time interface:(Nanosecond) + * Example: Base on TBfreq is 41MHZ. + * 1~48(ns): TB[63] + * 49~97(ns): TB[62] + * 98~195(ns): TB[61] + * 196~390(ns): TB[60] + * 391~780(ns): TB[59] + * 781~1560(ns): TB[58] + * ... + */ +static DEVICE_ATTR(pw20_wait_time, 0600, + show_pw20_wait_time, + store_pw20_wait_time); +static DEVICE_ATTR(altivec_idle_wait_time, 0600, + show_altivec_idle_wait_time, + store_altivec_idle_wait_time); +#endif + /* * Enabling PMCs will slow partition context switch times so we only do * it the first time we write to the PMCs. @@ -108,14 +404,14 @@ void ppc_enable_pmcs(void) } EXPORT_SYMBOL(ppc_enable_pmcs); -#define SYSFS_PMCSETUP(NAME, ADDRESS) \ +#define __SYSFS_SPRSETUP(NAME, ADDRESS, EXTRA) \ static void read_##NAME(void *val) \ { \ *(unsigned long *)val = mfspr(ADDRESS); \ } \ static void write_##NAME(void *val) \ { \ - ppc_enable_pmcs(); \ + EXTRA; \ mtspr(ADDRESS, *(unsigned long *)val); \ } \ static ssize_t show_##NAME(struct device *dev, \ @@ -140,6 +436,10 @@ static ssize_t __used \ return count; \ } +#define SYSFS_PMCSETUP(NAME, ADDRESS) \ + __SYSFS_SPRSETUP(NAME, ADDRESS, ppc_enable_pmcs()) +#define SYSFS_SPRSETUP(NAME, ADDRESS) \ + __SYSFS_SPRSETUP(NAME, ADDRESS, ) /* Let's define all possible registers, we'll only hook up the ones * that are implemented on the current processor @@ -175,10 +475,10 @@ SYSFS_PMCSETUP(pmc7, SPRN_PMC7); SYSFS_PMCSETUP(pmc8, SPRN_PMC8); SYSFS_PMCSETUP(mmcra, SPRN_MMCRA); -SYSFS_PMCSETUP(purr, SPRN_PURR); -SYSFS_PMCSETUP(spurr, SPRN_SPURR); -SYSFS_PMCSETUP(dscr, SPRN_DSCR); -SYSFS_PMCSETUP(pir, SPRN_PIR); +SYSFS_SPRSETUP(purr, SPRN_PURR); +SYSFS_SPRSETUP(spurr, SPRN_SPURR); +SYSFS_SPRSETUP(dscr, SPRN_DSCR); +SYSFS_SPRSETUP(pir, SPRN_PIR); /* Lets only enable read for phyp resources and @@ -249,34 +549,34 @@ SYSFS_PMCSETUP(pa6t_pmc3, SPRN_PA6T_PMC3); SYSFS_PMCSETUP(pa6t_pmc4, SPRN_PA6T_PMC4); SYSFS_PMCSETUP(pa6t_pmc5, SPRN_PA6T_PMC5); #ifdef CONFIG_DEBUG_KERNEL -SYSFS_PMCSETUP(hid0, SPRN_HID0); -SYSFS_PMCSETUP(hid1, SPRN_HID1); -SYSFS_PMCSETUP(hid4, SPRN_HID4); -SYSFS_PMCSETUP(hid5, SPRN_HID5); -SYSFS_PMCSETUP(ima0, SPRN_PA6T_IMA0); -SYSFS_PMCSETUP(ima1, SPRN_PA6T_IMA1); -SYSFS_PMCSETUP(ima2, SPRN_PA6T_IMA2); -SYSFS_PMCSETUP(ima3, SPRN_PA6T_IMA3); -SYSFS_PMCSETUP(ima4, SPRN_PA6T_IMA4); -SYSFS_PMCSETUP(ima5, SPRN_PA6T_IMA5); -SYSFS_PMCSETUP(ima6, SPRN_PA6T_IMA6); -SYSFS_PMCSETUP(ima7, SPRN_PA6T_IMA7); -SYSFS_PMCSETUP(ima8, SPRN_PA6T_IMA8); -SYSFS_PMCSETUP(ima9, SPRN_PA6T_IMA9); -SYSFS_PMCSETUP(imaat, SPRN_PA6T_IMAAT); -SYSFS_PMCSETUP(btcr, SPRN_PA6T_BTCR); -SYSFS_PMCSETUP(pccr, SPRN_PA6T_PCCR); -SYSFS_PMCSETUP(rpccr, SPRN_PA6T_RPCCR); -SYSFS_PMCSETUP(der, SPRN_PA6T_DER); -SYSFS_PMCSETUP(mer, SPRN_PA6T_MER); -SYSFS_PMCSETUP(ber, SPRN_PA6T_BER); -SYSFS_PMCSETUP(ier, SPRN_PA6T_IER); -SYSFS_PMCSETUP(sier, SPRN_PA6T_SIER); -SYSFS_PMCSETUP(siar, SPRN_PA6T_SIAR); -SYSFS_PMCSETUP(tsr0, SPRN_PA6T_TSR0); -SYSFS_PMCSETUP(tsr1, SPRN_PA6T_TSR1); -SYSFS_PMCSETUP(tsr2, SPRN_PA6T_TSR2); -SYSFS_PMCSETUP(tsr3, SPRN_PA6T_TSR3); +SYSFS_SPRSETUP(hid0, SPRN_HID0); +SYSFS_SPRSETUP(hid1, SPRN_HID1); +SYSFS_SPRSETUP(hid4, SPRN_HID4); +SYSFS_SPRSETUP(hid5, SPRN_HID5); +SYSFS_SPRSETUP(ima0, SPRN_PA6T_IMA0); +SYSFS_SPRSETUP(ima1, SPRN_PA6T_IMA1); +SYSFS_SPRSETUP(ima2, SPRN_PA6T_IMA2); +SYSFS_SPRSETUP(ima3, SPRN_PA6T_IMA3); +SYSFS_SPRSETUP(ima4, SPRN_PA6T_IMA4); +SYSFS_SPRSETUP(ima5, SPRN_PA6T_IMA5); +SYSFS_SPRSETUP(ima6, SPRN_PA6T_IMA6); +SYSFS_SPRSETUP(ima7, SPRN_PA6T_IMA7); +SYSFS_SPRSETUP(ima8, SPRN_PA6T_IMA8); +SYSFS_SPRSETUP(ima9, SPRN_PA6T_IMA9); +SYSFS_SPRSETUP(imaat, SPRN_PA6T_IMAAT); +SYSFS_SPRSETUP(btcr, SPRN_PA6T_BTCR); +SYSFS_SPRSETUP(pccr, SPRN_PA6T_PCCR); +SYSFS_SPRSETUP(rpccr, SPRN_PA6T_RPCCR); +SYSFS_SPRSETUP(der, SPRN_PA6T_DER); +SYSFS_SPRSETUP(mer, SPRN_PA6T_MER); +SYSFS_SPRSETUP(ber, SPRN_PA6T_BER); +SYSFS_SPRSETUP(ier, SPRN_PA6T_IER); +SYSFS_SPRSETUP(sier, SPRN_PA6T_SIER); +SYSFS_SPRSETUP(siar, SPRN_PA6T_SIAR); +SYSFS_SPRSETUP(tsr0, SPRN_PA6T_TSR0); +SYSFS_SPRSETUP(tsr1, SPRN_PA6T_TSR1); +SYSFS_SPRSETUP(tsr2, SPRN_PA6T_TSR2); +SYSFS_SPRSETUP(tsr3, SPRN_PA6T_TSR3); #endif /* CONFIG_DEBUG_KERNEL */ #endif /* HAS_PPC_PMC_PA6T */ @@ -421,6 +721,15 @@ static void register_cpu_online(unsigned int cpu) device_create_file(s, &dev_attr_pir); #endif /* CONFIG_PPC64 */ +#ifdef CONFIG_PPC_FSL_BOOK3E + if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) { + device_create_file(s, &dev_attr_pw20_state); + device_create_file(s, &dev_attr_pw20_wait_time); + + device_create_file(s, &dev_attr_altivec_idle); + device_create_file(s, &dev_attr_altivec_idle_wait_time); + } +#endif cacheinfo_cpu_online(cpu); } @@ -493,6 +802,15 @@ static void unregister_cpu_online(unsigned int cpu) device_remove_file(s, &dev_attr_pir); #endif /* CONFIG_PPC64 */ +#ifdef CONFIG_PPC_FSL_BOOK3E + if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) { + device_remove_file(s, &dev_attr_pw20_state); + device_remove_file(s, &dev_attr_pw20_wait_time); + + device_remove_file(s, &dev_attr_altivec_idle); + device_remove_file(s, &dev_attr_altivec_idle_wait_time); + } +#endif cacheinfo_cpu_offline(cpu); } diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index b3b144121cc..b3dab20acf3 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -510,7 +510,6 @@ void timer_interrupt(struct pt_regs * regs) */ may_hard_irq_enable(); - __get_cpu_var(irq_stat).timer_irqs++; #if defined(CONFIG_PPC32) && defined(CONFIG_PMAC) if (atomic_read(&ppc_n_lost_interrupts) != 0) @@ -532,10 +531,15 @@ void timer_interrupt(struct pt_regs * regs) *next_tb = ~(u64)0; if (evt->event_handler) evt->event_handler(evt); + __get_cpu_var(irq_stat).timer_irqs_event++; } else { now = *next_tb - now; if (now <= DECREMENTER_MAX) set_dec((int)now); + /* We may have raced with new irq work */ + if (test_irq_work_pending()) + set_dec(1); + __get_cpu_var(irq_stat).timer_irqs_others++; } #ifdef CONFIG_PPC64 @@ -801,8 +805,16 @@ static void __init clocksource_init(void) static int decrementer_set_next_event(unsigned long evt, struct clock_event_device *dev) { + /* Don't adjust the decrementer if some irq work is pending */ + if (test_irq_work_pending()) + return 0; __get_cpu_var(decrementers_next_tb) = get_tb_or_rtc() + evt; set_dec(evt); + + /* We may have raced with new irq work */ + if (test_irq_work_pending()) + set_dec(1); + return 0; } diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 907a472f9a9..33cd7a0b8e7 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -285,6 +285,21 @@ void system_reset_exception(struct pt_regs *regs) /* What should we do here? We could issue a shutdown or hard reset. */ } + +/* + * This function is called in real mode. Strictly no printk's please. + * + * regs->nip and regs->msr contains srr0 and ssr1. + */ +long machine_check_early(struct pt_regs *regs) +{ + long handled = 0; + + if (cur_cpu_spec && cur_cpu_spec->machine_check_early) + handled = cur_cpu_spec->machine_check_early(regs); + return handled; +} + #endif /* @@ -1384,7 +1399,6 @@ void fp_unavailable_tm(struct pt_regs *regs) TM_DEBUG("FP Unavailable trap whilst transactional at 0x%lx, MSR=%lx\n", regs->nip, regs->msr); - tm_enable(); /* We can only have got here if the task started using FP after * beginning the transaction. So, the transactional regs are just a @@ -1393,8 +1407,7 @@ void fp_unavailable_tm(struct pt_regs *regs) * transaction, and probably retry but now with FP enabled. So the * checkpointed FP registers need to be loaded. */ - tm_reclaim(¤t->thread, current->thread.regs->msr, - TM_CAUSE_FAC_UNAV); + tm_reclaim_current(TM_CAUSE_FAC_UNAV); /* Reclaim didn't save out any FPRs to transact_fprs. */ /* Enable FP for the task: */ @@ -1403,11 +1416,19 @@ void fp_unavailable_tm(struct pt_regs *regs) /* This loads and recheckpoints the FP registers from * thread.fpr[]. They will remain in registers after the * checkpoint so we don't need to reload them after. + * If VMX is in use, the VRs now hold checkpointed values, + * so we don't want to load the VRs from the thread_struct. */ - tm_recheckpoint(¤t->thread, regs->msr); + tm_recheckpoint(¤t->thread, MSR_FP); + + /* If VMX is in use, get the transactional values back */ + if (regs->msr & MSR_VEC) { + do_load_up_transact_altivec(¤t->thread); + /* At this point all the VSX state is loaded, so enable it */ + regs->msr |= MSR_VSX; + } } -#ifdef CONFIG_ALTIVEC void altivec_unavailable_tm(struct pt_regs *regs) { /* See the comments in fp_unavailable_tm(). This function operates @@ -1417,18 +1438,21 @@ void altivec_unavailable_tm(struct pt_regs *regs) TM_DEBUG("Vector Unavailable trap whilst transactional at 0x%lx," "MSR=%lx\n", regs->nip, regs->msr); - tm_enable(); - tm_reclaim(¤t->thread, current->thread.regs->msr, - TM_CAUSE_FAC_UNAV); + tm_reclaim_current(TM_CAUSE_FAC_UNAV); regs->msr |= MSR_VEC; - tm_recheckpoint(¤t->thread, regs->msr); + tm_recheckpoint(¤t->thread, MSR_VEC); current->thread.used_vr = 1; + + if (regs->msr & MSR_FP) { + do_load_up_transact_fpu(¤t->thread); + regs->msr |= MSR_VSX; + } } -#endif -#ifdef CONFIG_VSX void vsx_unavailable_tm(struct pt_regs *regs) { + unsigned long orig_msr = regs->msr; + /* See the comments in fp_unavailable_tm(). This works similarly, * though we're loading both FP and VEC registers in here. * @@ -1440,18 +1464,30 @@ void vsx_unavailable_tm(struct pt_regs *regs) "MSR=%lx\n", regs->nip, regs->msr); - tm_enable(); + current->thread.used_vsr = 1; + + /* If FP and VMX are already loaded, we have all the state we need */ + if ((orig_msr & (MSR_FP | MSR_VEC)) == (MSR_FP | MSR_VEC)) { + regs->msr |= MSR_VSX; + return; + } + /* This reclaims FP and/or VR regs if they're already enabled */ - tm_reclaim(¤t->thread, current->thread.regs->msr, - TM_CAUSE_FAC_UNAV); + tm_reclaim_current(TM_CAUSE_FAC_UNAV); regs->msr |= MSR_VEC | MSR_FP | current->thread.fpexc_mode | MSR_VSX; - /* This loads & recheckpoints FP and VRs. */ - tm_recheckpoint(¤t->thread, regs->msr); - current->thread.used_vsr = 1; + + /* This loads & recheckpoints FP and VRs; but we have + * to be sure not to overwrite previously-valid state. + */ + tm_recheckpoint(¤t->thread, regs->msr & ~orig_msr); + + if (orig_msr & MSR_FP) + do_load_up_transact_fpu(¤t->thread); + if (orig_msr & MSR_VEC) + do_load_up_transact_altivec(¤t->thread); } -#endif #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ void performance_monitor_exception(struct pt_regs *regs) diff --git a/arch/powerpc/kernel/vdso32/vdso32_wrapper.S b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S index 6e8f507ed32..6ac107ac402 100644 --- a/arch/powerpc/kernel/vdso32/vdso32_wrapper.S +++ b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S @@ -1,4 +1,3 @@ -#include <linux/init.h> #include <linux/linkage.h> #include <asm/page.h> @@ -7,7 +6,7 @@ .globl vdso32_start, vdso32_end .balign PAGE_SIZE vdso32_start: - .incbin "arch/powerpc/kernel/vdso32/vdso32.so" + .incbin "arch/powerpc/kernel/vdso32/vdso32.so.dbg" .balign PAGE_SIZE vdso32_end: diff --git a/arch/powerpc/kernel/vdso64/vdso64_wrapper.S b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S index b8553d62b79..df60fca6a13 100644 --- a/arch/powerpc/kernel/vdso64/vdso64_wrapper.S +++ b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S @@ -1,4 +1,3 @@ -#include <linux/init.h> #include <linux/linkage.h> #include <asm/page.h> @@ -7,7 +6,7 @@ .globl vdso64_start, vdso64_end .balign PAGE_SIZE vdso64_start: - .incbin "arch/powerpc/kernel/vdso64/vdso64.so" + .incbin "arch/powerpc/kernel/vdso64/vdso64.so.dbg" .balign PAGE_SIZE vdso64_end: diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index 0458a9aaba9..74f8050518d 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -37,6 +37,16 @@ _GLOBAL(do_load_up_transact_altivec) #endif /* + * Enable use of VMX/Altivec for the caller. + */ +_GLOBAL(vec_enable) + mfmsr r3 + oris r3,r3,MSR_VEC@h + MTMSRD(r3) + isync + blr + +/* * Load state from memory into VMX registers including VSCR. * Assumes the caller has enabled VMX in the MSR. */ diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 76a64821f4a..826d8bd9e52 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -518,16 +518,18 @@ static dma_addr_t vio_dma_iommu_map_page(struct device *dev, struct page *page, struct dma_attrs *attrs) { struct vio_dev *viodev = to_vio_dev(dev); + struct iommu_table *tbl; dma_addr_t ret = DMA_ERROR_CODE; - if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) { + tbl = get_iommu_table_base(dev); + if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl)))) { atomic_inc(&viodev->cmo.allocs_failed); return ret; } ret = dma_iommu_ops.map_page(dev, page, offset, size, direction, attrs); if (unlikely(dma_mapping_error(dev, ret))) { - vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); + vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl))); atomic_inc(&viodev->cmo.allocs_failed); } @@ -540,10 +542,12 @@ static void vio_dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle, struct dma_attrs *attrs) { struct vio_dev *viodev = to_vio_dev(dev); + struct iommu_table *tbl; + tbl = get_iommu_table_base(dev); dma_iommu_ops.unmap_page(dev, dma_handle, size, direction, attrs); - vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); + vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE(tbl))); } static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist, @@ -551,12 +555,14 @@ static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist, struct dma_attrs *attrs) { struct vio_dev *viodev = to_vio_dev(dev); + struct iommu_table *tbl; struct scatterlist *sgl; int ret, count = 0; size_t alloc_size = 0; + tbl = get_iommu_table_base(dev); for (sgl = sglist; count < nelems; count++, sgl++) - alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE); + alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE(tbl)); if (vio_cmo_alloc(viodev, alloc_size)) { atomic_inc(&viodev->cmo.allocs_failed); @@ -572,7 +578,7 @@ static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist, } for (sgl = sglist, count = 0; count < ret; count++, sgl++) - alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE); + alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE(tbl)); if (alloc_size) vio_cmo_dealloc(viodev, alloc_size); @@ -585,12 +591,14 @@ static void vio_dma_iommu_unmap_sg(struct device *dev, struct dma_attrs *attrs) { struct vio_dev *viodev = to_vio_dev(dev); + struct iommu_table *tbl; struct scatterlist *sgl; size_t alloc_size = 0; int count = 0; + tbl = get_iommu_table_base(dev); for (sgl = sglist; count < nelems; count++, sgl++) - alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE); + alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE(tbl)); dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs); @@ -706,11 +714,14 @@ static int vio_cmo_bus_probe(struct vio_dev *viodev) { struct vio_cmo_dev_entry *dev_ent; struct device *dev = &viodev->dev; + struct iommu_table *tbl; struct vio_driver *viodrv = to_vio_driver(dev->driver); unsigned long flags; size_t size; bool dma_capable = false; + tbl = get_iommu_table_base(dev); + /* A device requires entitlement if it has a DMA window property */ switch (viodev->family) { case VDEVICE: @@ -736,7 +747,8 @@ static int vio_cmo_bus_probe(struct vio_dev *viodev) return -EINVAL; } - viodev->cmo.desired = IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev)); + viodev->cmo.desired = + IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev), tbl); if (viodev->cmo.desired < VIO_CMO_MIN_ENT) viodev->cmo.desired = VIO_CMO_MIN_ENT; size = VIO_CMO_MIN_ENT; @@ -1176,9 +1188,10 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) &tbl->it_index, &offset, &size); /* TCE table size - measured in tce entries */ - tbl->it_size = size >> IOMMU_PAGE_SHIFT; + tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; + tbl->it_size = size >> tbl->it_page_shift; /* offset for VIO should always be 0 */ - tbl->it_offset = offset >> IOMMU_PAGE_SHIFT; + tbl->it_offset = offset >> tbl->it_page_shift; tbl->it_busno = 0; tbl->it_type = TCE_VB; tbl->it_blocksize = 16; diff --git a/arch/powerpc/kvm/book3s_hv_ras.c b/arch/powerpc/kvm/book3s_hv_ras.c index a353c485808..768a9f977c0 100644 --- a/arch/powerpc/kvm/book3s_hv_ras.c +++ b/arch/powerpc/kvm/book3s_hv_ras.c @@ -12,6 +12,7 @@ #include <linux/kvm_host.h> #include <linux/kernel.h> #include <asm/opal.h> +#include <asm/mce.h> /* SRR1 bits for machine check on POWER7 */ #define SRR1_MC_LDSTERR (1ul << (63-42)) @@ -58,18 +59,6 @@ static void reload_slb(struct kvm_vcpu *vcpu) } } -/* POWER7 TLB flush */ -static void flush_tlb_power7(struct kvm_vcpu *vcpu) -{ - unsigned long i, rb; - - rb = TLBIEL_INVAL_SET_LPID; - for (i = 0; i < POWER7_TLB_SETS; ++i) { - asm volatile("tlbiel %0" : : "r" (rb)); - rb += 1 << TLBIEL_INVAL_SET_SHIFT; - } -} - /* * On POWER7, see if we can handle a machine check that occurred inside * the guest in real mode, without switching to the host partition. @@ -79,9 +68,7 @@ static void flush_tlb_power7(struct kvm_vcpu *vcpu) static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu) { unsigned long srr1 = vcpu->arch.shregs.msr; -#ifdef CONFIG_PPC_POWERNV - struct opal_machine_check_event *opal_evt; -#endif + struct machine_check_event mce_evt; long handled = 1; if (srr1 & SRR1_MC_LDSTERR) { @@ -96,7 +83,8 @@ static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu) DSISR_MC_SLB_PARITY | DSISR_MC_DERAT_MULTI); } if (dsisr & DSISR_MC_TLB_MULTI) { - flush_tlb_power7(vcpu); + if (cur_cpu_spec && cur_cpu_spec->flush_tlb) + cur_cpu_spec->flush_tlb(TLBIEL_INVAL_SET_LPID); dsisr &= ~DSISR_MC_TLB_MULTI; } /* Any other errors we don't understand? */ @@ -113,28 +101,38 @@ static long kvmppc_realmode_mc_power7(struct kvm_vcpu *vcpu) reload_slb(vcpu); break; case SRR1_MC_IFETCH_TLBMULTI: - flush_tlb_power7(vcpu); + if (cur_cpu_spec && cur_cpu_spec->flush_tlb) + cur_cpu_spec->flush_tlb(TLBIEL_INVAL_SET_LPID); break; default: handled = 0; } -#ifdef CONFIG_PPC_POWERNV /* - * See if OPAL has already handled the condition. - * We assume that if the condition is recovered then OPAL + * See if we have already handled the condition in the linux host. + * We assume that if the condition is recovered then linux host * will have generated an error log event that we will pick * up and log later. + * Don't release mce event now. In case if condition is not + * recovered we do guest exit and go back to linux host machine + * check handler. Hence we need make sure that current mce event + * is available for linux host to consume. */ - opal_evt = local_paca->opal_mc_evt; - if (opal_evt->version == OpalMCE_V1 && - (opal_evt->severity == OpalMCE_SEV_NO_ERROR || - opal_evt->disposition == OpalMCE_DISPOSITION_RECOVERED)) + if (!get_mce_event(&mce_evt, MCE_EVENT_DONTRELEASE)) + goto out; + + if (mce_evt.version == MCE_V1 && + (mce_evt.severity == MCE_SEV_NO_ERROR || + mce_evt.disposition == MCE_DISPOSITION_RECOVERED)) handled = 1; +out: + /* + * If we have handled the error, then release the mce event because + * we will be delivering machine check to guest. + */ if (handled) - opal_evt->in_use = 0; -#endif + release_mce_event(); return handled; } diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S index be3de1dd7bb..e4185f6b330 100644 --- a/arch/powerpc/kvm/bookehv_interrupts.S +++ b/arch/powerpc/kvm/bookehv_interrupts.S @@ -321,6 +321,8 @@ kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(DBG), \ SPRN_DSRR0, SPRN_DSRR1, 0 kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(CRIT), \ SPRN_CSRR0, SPRN_CSRR1, 0 +kvm_handler BOOKE_INTERRUPT_LRAT_ERROR, EX_PARAMS(GEN), \ + SPRN_SRR0, SPRN_SRR1, (NEED_EMU | NEED_DEAR | NEED_ESR) #else /* * For input register values, see arch/powerpc/include/asm/kvm_booke_hv_asm.h diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index 17e5b236431..d5edbeb8eb8 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -159,6 +159,21 @@ unsigned int translate_branch(const unsigned int *dest, const unsigned int *src) return 0; } +#ifdef CONFIG_PPC_BOOK3E_64 +void __patch_exception(int exc, unsigned long addr) +{ + extern unsigned int interrupt_base_book3e; + unsigned int *ibase = &interrupt_base_book3e; + + /* Our exceptions vectors start with a NOP and -then- a branch + * to deal with single stepping from userspace which stops on + * the second instruction. Thus we need to patch the second + * instruction of the exception, not the first one + */ + + patch_branch(ibase + (exc / 4) + 1, addr, 0); +} +#endif #ifdef CONFIG_CODE_PATCHING_SELFTEST diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S index b2c68ce139a..a5b30c71a8d 100644 --- a/arch/powerpc/lib/crtsavres.S +++ b/arch/powerpc/lib/crtsavres.S @@ -231,6 +231,87 @@ _GLOBAL(_rest32gpr_31_x) mr 1,11 blr +#ifdef CONFIG_ALTIVEC +/* Called with r0 pointing just beyond the end of the vector save area. */ + +_GLOBAL(_savevr_20) + li r11,-192 + stvx vr20,r11,r0 +_GLOBAL(_savevr_21) + li r11,-176 + stvx vr21,r11,r0 +_GLOBAL(_savevr_22) + li r11,-160 + stvx vr22,r11,r0 +_GLOBAL(_savevr_23) + li r11,-144 + stvx vr23,r11,r0 +_GLOBAL(_savevr_24) + li r11,-128 + stvx vr24,r11,r0 +_GLOBAL(_savevr_25) + li r11,-112 + stvx vr25,r11,r0 +_GLOBAL(_savevr_26) + li r11,-96 + stvx vr26,r11,r0 +_GLOBAL(_savevr_27) + li r11,-80 + stvx vr27,r11,r0 +_GLOBAL(_savevr_28) + li r11,-64 + stvx vr28,r11,r0 +_GLOBAL(_savevr_29) + li r11,-48 + stvx vr29,r11,r0 +_GLOBAL(_savevr_30) + li r11,-32 + stvx vr30,r11,r0 +_GLOBAL(_savevr_31) + li r11,-16 + stvx vr31,r11,r0 + blr + +_GLOBAL(_restvr_20) + li r11,-192 + lvx vr20,r11,r0 +_GLOBAL(_restvr_21) + li r11,-176 + lvx vr21,r11,r0 +_GLOBAL(_restvr_22) + li r11,-160 + lvx vr22,r11,r0 +_GLOBAL(_restvr_23) + li r11,-144 + lvx vr23,r11,r0 +_GLOBAL(_restvr_24) + li r11,-128 + lvx vr24,r11,r0 +_GLOBAL(_restvr_25) + li r11,-112 + lvx vr25,r11,r0 +_GLOBAL(_restvr_26) + li r11,-96 + lvx vr26,r11,r0 +_GLOBAL(_restvr_27) + li r11,-80 + lvx vr27,r11,r0 +_GLOBAL(_restvr_28) + li r11,-64 + lvx vr28,r11,r0 +_GLOBAL(_restvr_29) + li r11,-48 + lvx vr29,r11,r0 +_GLOBAL(_restvr_30) + li r11,-32 + lvx vr30,r11,r0 +_GLOBAL(_restvr_31) + li r11,-16 + lvx vr31,r11,r0 + blr + +#endif /* CONFIG_ALTIVEC */ + #else /* CONFIG_PPC64 */ .section ".text.save.restore","ax",@progbits @@ -356,6 +437,111 @@ _restgpr0_31: mtlr r0 blr +#ifdef CONFIG_ALTIVEC +/* Called with r0 pointing just beyond the end of the vector save area. */ + +.globl _savevr_20 +_savevr_20: + li r12,-192 + stvx vr20,r12,r0 +.globl _savevr_21 +_savevr_21: + li r12,-176 + stvx vr21,r12,r0 +.globl _savevr_22 +_savevr_22: + li r12,-160 + stvx vr22,r12,r0 +.globl _savevr_23 +_savevr_23: + li r12,-144 + stvx vr23,r12,r0 +.globl _savevr_24 +_savevr_24: + li r12,-128 + stvx vr24,r12,r0 +.globl _savevr_25 +_savevr_25: + li r12,-112 + stvx vr25,r12,r0 +.globl _savevr_26 +_savevr_26: + li r12,-96 + stvx vr26,r12,r0 +.globl _savevr_27 +_savevr_27: + li r12,-80 + stvx vr27,r12,r0 +.globl _savevr_28 +_savevr_28: + li r12,-64 + stvx vr28,r12,r0 +.globl _savevr_29 +_savevr_29: + li r12,-48 + stvx vr29,r12,r0 +.globl _savevr_30 +_savevr_30: + li r12,-32 + stvx vr30,r12,r0 +.globl _savevr_31 +_savevr_31: + li r12,-16 + stvx vr31,r12,r0 + blr + +.globl _restvr_20 +_restvr_20: + li r12,-192 + lvx vr20,r12,r0 +.globl _restvr_21 +_restvr_21: + li r12,-176 + lvx vr21,r12,r0 +.globl _restvr_22 +_restvr_22: + li r12,-160 + lvx vr22,r12,r0 +.globl _restvr_23 +_restvr_23: + li r12,-144 + lvx vr23,r12,r0 +.globl _restvr_24 +_restvr_24: + li r12,-128 + lvx vr24,r12,r0 +.globl _restvr_25 +_restvr_25: + li r12,-112 + lvx vr25,r12,r0 +.globl _restvr_26 +_restvr_26: + li r12,-96 + lvx vr26,r12,r0 +.globl _restvr_27 +_restvr_27: + li r12,-80 + lvx vr27,r12,r0 +.globl _restvr_28 +_restvr_28: + li r12,-64 + lvx vr28,r12,r0 +.globl _restvr_29 +_restvr_29: + li r12,-48 + lvx vr29,r12,r0 +.globl _restvr_30 +_restvr_30: + li r12,-32 + lvx vr30,r12,r0 +.globl _restvr_31 +_restvr_31: + li r12,-16 + lvx vr31,r12,r0 + blr + +#endif /* CONFIG_ALTIVEC */ + #endif /* CONFIG_PPC64 */ #endif diff --git a/arch/powerpc/math-emu/math_efp.c b/arch/powerpc/math-emu/math_efp.c index a73f0884d35..28337c9709a 100644 --- a/arch/powerpc/math-emu/math_efp.c +++ b/arch/powerpc/math-emu/math_efp.c @@ -20,6 +20,7 @@ */ #include <linux/types.h> +#include <linux/prctl.h> #include <asm/uaccess.h> #include <asm/reg.h> @@ -275,21 +276,13 @@ int do_spe_mathemu(struct pt_regs *regs) case EFSCTSF: case EFSCTUF: - if (!((vb.wp[1] >> 23) == 0xff && ((vb.wp[1] & 0x7fffff) > 0))) { - /* NaN */ - if (((vb.wp[1] >> 23) & 0xff) == 0) { - /* denorm */ - vc.wp[1] = 0x0; - } else if ((vb.wp[1] >> 31) == 0) { - /* positive normal */ - vc.wp[1] = (func == EFSCTSF) ? - 0x7fffffff : 0xffffffff; - } else { /* negative normal */ - vc.wp[1] = (func == EFSCTSF) ? - 0x80000000 : 0x0; - } - } else { /* rB is NaN */ - vc.wp[1] = 0x0; + if (SB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + SB_e += (func == EFSCTSF ? 31 : 32); + FP_TO_INT_ROUND_S(vc.wp[1], SB, 32, + (func == EFSCTSF)); } goto update_regs; @@ -306,16 +299,25 @@ int do_spe_mathemu(struct pt_regs *regs) } case EFSCTSI: - case EFSCTSIZ: case EFSCTUI: + if (SB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_ROUND_S(vc.wp[1], SB, 32, + ((func & 0x3) != 0)); + } + goto update_regs; + + case EFSCTSIZ: case EFSCTUIZ: - if (func & 0x4) { - _FP_ROUND(1, SB); + if (SB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); } else { - _FP_ROUND_ZERO(1, SB); + FP_TO_INT_S(vc.wp[1], SB, 32, + ((func & 0x3) != 0)); } - FP_TO_INT_S(vc.wp[1], SB, 32, - (((func & 0x3) != 0) || SB_s)); goto update_regs; default: @@ -404,22 +406,13 @@ cmp_s: case EFDCTSF: case EFDCTUF: - if (!((vb.wp[0] >> 20) == 0x7ff && - ((vb.wp[0] & 0xfffff) > 0 || (vb.wp[1] > 0)))) { - /* not a NaN */ - if (((vb.wp[0] >> 20) & 0x7ff) == 0) { - /* denorm */ - vc.wp[1] = 0x0; - } else if ((vb.wp[0] >> 31) == 0) { - /* positive normal */ - vc.wp[1] = (func == EFDCTSF) ? - 0x7fffffff : 0xffffffff; - } else { /* negative normal */ - vc.wp[1] = (func == EFDCTSF) ? - 0x80000000 : 0x0; - } - } else { /* NaN */ - vc.wp[1] = 0x0; + if (DB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + DB_e += (func == EFDCTSF ? 31 : 32); + FP_TO_INT_ROUND_D(vc.wp[1], DB, 32, + (func == EFDCTSF)); } goto update_regs; @@ -437,21 +430,35 @@ cmp_s: case EFDCTUIDZ: case EFDCTSIDZ: - _FP_ROUND_ZERO(2, DB); - FP_TO_INT_D(vc.dp[0], DB, 64, ((func & 0x1) == 0)); + if (DB_c == FP_CLS_NAN) { + vc.dp[0] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_D(vc.dp[0], DB, 64, + ((func & 0x1) == 0)); + } goto update_regs; case EFDCTUI: case EFDCTSI: + if (DB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_ROUND_D(vc.wp[1], DB, 32, + ((func & 0x3) != 0)); + } + goto update_regs; + case EFDCTUIZ: case EFDCTSIZ: - if (func & 0x4) { - _FP_ROUND(2, DB); + if (DB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); } else { - _FP_ROUND_ZERO(2, DB); + FP_TO_INT_D(vc.wp[1], DB, 32, + ((func & 0x3) != 0)); } - FP_TO_INT_D(vc.wp[1], DB, 32, - (((func & 0x3) != 0) || DB_s)); goto update_regs; default: @@ -556,37 +563,60 @@ cmp_d: cmp = -1; goto cmp_vs; - case EVFSCTSF: - __asm__ __volatile__ ("mtspr 512, %4\n" - "efsctsf %0, %2\n" - "efsctsf %1, %3\n" - : "=r" (vc.wp[0]), "=r" (vc.wp[1]) - : "r" (vb.wp[0]), "r" (vb.wp[1]), "r" (0)); - goto update_regs; - case EVFSCTUF: - __asm__ __volatile__ ("mtspr 512, %4\n" - "efsctuf %0, %2\n" - "efsctuf %1, %3\n" - : "=r" (vc.wp[0]), "=r" (vc.wp[1]) - : "r" (vb.wp[0]), "r" (vb.wp[1]), "r" (0)); + case EVFSCTSF: + if (SB0_c == FP_CLS_NAN) { + vc.wp[0] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + SB0_e += (func == EVFSCTSF ? 31 : 32); + FP_TO_INT_ROUND_S(vc.wp[0], SB0, 32, + (func == EVFSCTSF)); + } + if (SB1_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + SB1_e += (func == EVFSCTSF ? 31 : 32); + FP_TO_INT_ROUND_S(vc.wp[1], SB1, 32, + (func == EVFSCTSF)); + } goto update_regs; case EVFSCTUI: case EVFSCTSI: + if (SB0_c == FP_CLS_NAN) { + vc.wp[0] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_ROUND_S(vc.wp[0], SB0, 32, + ((func & 0x3) != 0)); + } + if (SB1_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_ROUND_S(vc.wp[1], SB1, 32, + ((func & 0x3) != 0)); + } + goto update_regs; + case EVFSCTUIZ: case EVFSCTSIZ: - if (func & 0x4) { - _FP_ROUND(1, SB0); - _FP_ROUND(1, SB1); + if (SB0_c == FP_CLS_NAN) { + vc.wp[0] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); } else { - _FP_ROUND_ZERO(1, SB0); - _FP_ROUND_ZERO(1, SB1); + FP_TO_INT_S(vc.wp[0], SB0, 32, + ((func & 0x3) != 0)); + } + if (SB1_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_S(vc.wp[1], SB1, 32, + ((func & 0x3) != 0)); } - FP_TO_INT_S(vc.wp[0], SB0, 32, - (((func & 0x3) != 0) || SB0_s)); - FP_TO_INT_S(vc.wp[1], SB1, 32, - (((func & 0x3) != 0) || SB1_s)); goto update_regs; default: @@ -630,9 +660,27 @@ update_ccr: regs->ccr |= (IR << ((7 - ((speinsn >> 23) & 0x7)) << 2)); update_regs: - __FPU_FPSCR &= ~FP_EX_MASK; + /* + * If the "invalid" exception sticky bit was set by the + * processor for non-finite input, but was not set before the + * instruction being emulated, clear it. Likewise for the + * "underflow" bit, which may have been set by the processor + * for exact underflow, not just inexact underflow when the + * flag should be set for IEEE 754 semantics. Other sticky + * exceptions will only be set by the processor when they are + * correct according to IEEE 754 semantics, and we must not + * clear sticky bits that were already set before the emulated + * instruction as they represent the user-visible sticky + * exception status. "inexact" traps to kernel are not + * required for IEEE semantics and are not enabled by default, + * so the "inexact" sticky bit may have been set by a previous + * instruction without the kernel being aware of it. + */ + __FPU_FPSCR + &= ~(FP_EX_INVALID | FP_EX_UNDERFLOW) | current->thread.spefscr_last; __FPU_FPSCR |= (FP_CUR_EXCEPTIONS & FP_EX_MASK); mtspr(SPRN_SPEFSCR, __FPU_FPSCR); + current->thread.spefscr_last = __FPU_FPSCR; current->thread.evr[fc] = vc.wp[0]; regs->gpr[fc] = vc.wp[1]; @@ -644,6 +692,23 @@ update_regs: pr_debug("va: %08x %08x\n", va.wp[0], va.wp[1]); pr_debug("vb: %08x %08x\n", vb.wp[0], vb.wp[1]); + if (current->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) { + if ((FP_CUR_EXCEPTIONS & FP_EX_DIVZERO) + && (current->thread.fpexc_mode & PR_FP_EXC_DIV)) + return 1; + if ((FP_CUR_EXCEPTIONS & FP_EX_OVERFLOW) + && (current->thread.fpexc_mode & PR_FP_EXC_OVF)) + return 1; + if ((FP_CUR_EXCEPTIONS & FP_EX_UNDERFLOW) + && (current->thread.fpexc_mode & PR_FP_EXC_UND)) + return 1; + if ((FP_CUR_EXCEPTIONS & FP_EX_INEXACT) + && (current->thread.fpexc_mode & PR_FP_EXC_RES)) + return 1; + if ((FP_CUR_EXCEPTIONS & FP_EX_INVALID) + && (current->thread.fpexc_mode & PR_FP_EXC_INV)) + return 1; + } return 0; illegal: @@ -662,21 +727,28 @@ int speround_handler(struct pt_regs *regs) { union dw_union fgpr; int s_lo, s_hi; - unsigned long speinsn, type, fc; + int lo_inexact, hi_inexact; + int fp_result; + unsigned long speinsn, type, fb, fc, fptype, func; if (get_user(speinsn, (unsigned int __user *) regs->nip)) return -EFAULT; if ((speinsn >> 26) != 4) return -EINVAL; /* not an spe instruction */ - type = insn_type(speinsn & 0x7ff); + func = speinsn & 0x7ff; + type = insn_type(func); if (type == XCR) return -ENOSYS; __FPU_FPSCR = mfspr(SPRN_SPEFSCR); pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR); + fptype = (speinsn >> 5) & 0x7; + /* No need to round if the result is exact */ - if (!(__FPU_FPSCR & FP_EX_INEXACT)) + lo_inexact = __FPU_FPSCR & (SPEFSCR_FG | SPEFSCR_FX); + hi_inexact = __FPU_FPSCR & (SPEFSCR_FGH | SPEFSCR_FXH); + if (!(lo_inexact || (hi_inexact && fptype == VCT))) return 0; fc = (speinsn >> 21) & 0x1f; @@ -685,9 +757,68 @@ int speround_handler(struct pt_regs *regs) fgpr.wp[0] = current->thread.evr[fc]; fgpr.wp[1] = regs->gpr[fc]; + fb = (speinsn >> 11) & 0x1f; + switch (func) { + case EFSCTUIZ: + case EFSCTSIZ: + case EVFSCTUIZ: + case EVFSCTSIZ: + case EFDCTUIDZ: + case EFDCTSIDZ: + case EFDCTUIZ: + case EFDCTSIZ: + /* + * These instructions always round to zero, + * independent of the rounding mode. + */ + return 0; + + case EFSCTUI: + case EFSCTUF: + case EVFSCTUI: + case EVFSCTUF: + case EFDCTUI: + case EFDCTUF: + fp_result = 0; + s_lo = 0; + s_hi = 0; + break; + + case EFSCTSI: + case EFSCTSF: + fp_result = 0; + /* Recover the sign of a zero result if possible. */ + if (fgpr.wp[1] == 0) + s_lo = regs->gpr[fb] & SIGN_BIT_S; + break; + + case EVFSCTSI: + case EVFSCTSF: + fp_result = 0; + /* Recover the sign of a zero result if possible. */ + if (fgpr.wp[1] == 0) + s_lo = regs->gpr[fb] & SIGN_BIT_S; + if (fgpr.wp[0] == 0) + s_hi = current->thread.evr[fb] & SIGN_BIT_S; + break; + + case EFDCTSI: + case EFDCTSF: + fp_result = 0; + s_hi = s_lo; + /* Recover the sign of a zero result if possible. */ + if (fgpr.wp[1] == 0) + s_hi = current->thread.evr[fb] & SIGN_BIT_S; + break; + + default: + fp_result = 1; + break; + } + pr_debug("round fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]); - switch ((speinsn >> 5) & 0x7) { + switch (fptype) { /* Since SPE instructions on E500 core can handle round to nearest * and round toward zero with IEEE-754 complied, we just need * to handle round toward +Inf and round toward -Inf by software. @@ -696,25 +827,52 @@ int speround_handler(struct pt_regs *regs) if ((FP_ROUNDMODE) == FP_RND_PINF) { if (!s_lo) fgpr.wp[1]++; /* Z > 0, choose Z1 */ } else { /* round to -Inf */ - if (s_lo) fgpr.wp[1]++; /* Z < 0, choose Z2 */ + if (s_lo) { + if (fp_result) + fgpr.wp[1]++; /* Z < 0, choose Z2 */ + else + fgpr.wp[1]--; /* Z < 0, choose Z2 */ + } } break; case DPFP: if (FP_ROUNDMODE == FP_RND_PINF) { - if (!s_hi) fgpr.dp[0]++; /* Z > 0, choose Z1 */ + if (!s_hi) { + if (fp_result) + fgpr.dp[0]++; /* Z > 0, choose Z1 */ + else + fgpr.wp[1]++; /* Z > 0, choose Z1 */ + } } else { /* round to -Inf */ - if (s_hi) fgpr.dp[0]++; /* Z < 0, choose Z2 */ + if (s_hi) { + if (fp_result) + fgpr.dp[0]++; /* Z < 0, choose Z2 */ + else + fgpr.wp[1]--; /* Z < 0, choose Z2 */ + } } break; case VCT: if (FP_ROUNDMODE == FP_RND_PINF) { - if (!s_lo) fgpr.wp[1]++; /* Z_low > 0, choose Z1 */ - if (!s_hi) fgpr.wp[0]++; /* Z_high word > 0, choose Z1 */ + if (lo_inexact && !s_lo) + fgpr.wp[1]++; /* Z_low > 0, choose Z1 */ + if (hi_inexact && !s_hi) + fgpr.wp[0]++; /* Z_high word > 0, choose Z1 */ } else { /* round to -Inf */ - if (s_lo) fgpr.wp[1]++; /* Z_low < 0, choose Z2 */ - if (s_hi) fgpr.wp[0]++; /* Z_high < 0, choose Z2 */ + if (lo_inexact && s_lo) { + if (fp_result) + fgpr.wp[1]++; /* Z_low < 0, choose Z2 */ + else + fgpr.wp[1]--; /* Z_low < 0, choose Z2 */ + } + if (hi_inexact && s_hi) { + if (fp_result) + fgpr.wp[0]++; /* Z_high < 0, choose Z2 */ + else + fgpr.wp[0]--; /* Z_high < 0, choose Z2 */ + } } break; @@ -727,6 +885,8 @@ int speround_handler(struct pt_regs *regs) pr_debug(" to fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]); + if (current->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) + return (current->thread.fpexc_mode & PR_FP_EXC_RES) ? 1 : 0; return 0; } diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 07ba45b0f07..94cd728166d 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -52,6 +52,7 @@ #include <asm/smp.h> #include <asm/machdep.h> #include <asm/setup.h> +#include <asm/paca.h> #include "mmu_decl.h" @@ -171,11 +172,10 @@ unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, return 1UL << camsize; } -unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) +static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt, + unsigned long ram, int max_cam_idx) { int i; - unsigned long virt = PAGE_OFFSET; - phys_addr_t phys = memstart_addr; unsigned long amount_mapped = 0; /* Calculate CAM values */ @@ -192,9 +192,23 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) } tlbcam_index = i; +#ifdef CONFIG_PPC64 + get_paca()->tcd.esel_next = i; + get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; + get_paca()->tcd.esel_first = i; +#endif + return amount_mapped; } +unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) +{ + unsigned long virt = PAGE_OFFSET; + phys_addr_t phys = memstart_addr; + + return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx); +} + #ifdef CONFIG_PPC32 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) @@ -222,7 +236,9 @@ void __init adjust_total_lowmem(void) /* adjust lowmem size to __max_low_memory */ ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem); + i = switch_to_as1(); __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM); + restore_to_as0(i, 0, 0, 1); pr_info("Memory CAM mapping: "); for (i = 0; i < tlbcam_index - 1; i++) @@ -241,4 +257,62 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base, /* 64M mapped initially according to head_fsl_booke.S */ memblock_set_current_limit(min_t(u64, limit, 0x04000000)); } + +#ifdef CONFIG_RELOCATABLE +int __initdata is_second_reloc; +notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start) +{ + unsigned long base = KERNELBASE; + + kernstart_addr = start; + if (is_second_reloc) { + virt_phys_offset = PAGE_OFFSET - memstart_addr; + return; + } + + /* + * Relocatable kernel support based on processing of dynamic + * relocation entries. Before we get the real memstart_addr, + * We will compute the virt_phys_offset like this: + * virt_phys_offset = stext.run - kernstart_addr + * + * stext.run = (KERNELBASE & ~0x3ffffff) + + * (kernstart_addr & 0x3ffffff) + * When we relocate, we have : + * + * (kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff) + * + * hence: + * virt_phys_offset = (KERNELBASE & ~0x3ffffff) - + * (kernstart_addr & ~0x3ffffff) + * + */ + start &= ~0x3ffffff; + base &= ~0x3ffffff; + virt_phys_offset = base - start; + early_get_first_memblock_info(__va(dt_ptr), NULL); + /* + * We now get the memstart_addr, then we should check if this + * address is the same as what the PAGE_OFFSET map to now. If + * not we have to change the map of PAGE_OFFSET to memstart_addr + * and do a second relocation. + */ + if (start != memstart_addr) { + int n; + long offset = start - memstart_addr; + + is_second_reloc = 1; + n = switch_to_as1(); + /* map a 64M area for the second relocation */ + if (memstart_addr > start) + map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM); + else + map_mem_in_cams_addr(start, PAGE_OFFSET + offset, + 0x4000000, CONFIG_LOWMEM_CAM_NUM); + restore_to_as0(n, offset, __va(dt_ptr), 1); + /* We should never reach here */ + panic("Relocation error"); + } +} +#endif #endif diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index d3cbda62857..1136d26a95a 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -148,7 +148,10 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/ andc r0,r30,r0 /* r0 = pte & ~r0 */ rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */ - ori r3,r3,HPTE_R_C /* Always add "C" bit for perf. */ + /* + * Always add "C" bit for perf. Memory coherence is always enabled + */ + ori r3,r3,HPTE_R_C | HPTE_R_M /* We eventually do the icache sync here (maybe inline that * code rather than call a C function...) @@ -457,7 +460,10 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/ andc r0,r3,r0 /* r0 = pte & ~r0 */ rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */ - ori r3,r3,HPTE_R_C /* Always add "C" bit for perf. */ + /* + * Always add "C" bit for perf. Memory coherence is always enabled + */ + ori r3,r3,HPTE_R_C | HPTE_R_M /* We eventually do the icache sync here (maybe inline that * code rather than call a C function...) @@ -795,7 +801,10 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) and r0,r0,r4 /* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/ andc r0,r30,r0 /* r0 = pte & ~r0 */ rlwimi r3,r0,32-1,31,31 /* Insert result into PP lsb */ - ori r3,r3,HPTE_R_C /* Always add "C" bit for perf. */ + /* + * Always add "C" bit for perf. Memory coherence is always enabled + */ + ori r3,r3,HPTE_R_C | HPTE_R_M /* We eventually do the icache sync here (maybe inline that * code rather than call a C function...) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 6176b3cdf57..d766d6ee33f 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -169,9 +169,10 @@ static unsigned long htab_convert_pte_flags(unsigned long pteflags) if ((pteflags & _PAGE_USER) && !((pteflags & _PAGE_RW) && (pteflags & _PAGE_DIRTY))) rflags |= 1; - - /* Always add C */ - return rflags | HPTE_R_C; + /* + * Always add "C" bit for perf. Memory coherence is always enabled + */ + return rflags | HPTE_R_C | HPTE_R_M; } int htab_bolt_mapping(unsigned long vstart, unsigned long vend, @@ -206,6 +207,20 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, if (overlaps_kernel_text(vaddr, vaddr + step)) tprot &= ~HPTE_R_N; + /* + * If relocatable, check if it overlaps interrupt vectors that + * are copied down to real 0. For relocatable kernel + * (e.g. kdump case) we copy interrupt vectors down to real + * address 0. Mark that region as executable. This is + * because on p8 system with relocation on exception feature + * enabled, exceptions are raised with MMU (IR=DR=1) ON. Hence + * in order to execute the interrupt handlers in virtual + * mode the vector region need to be marked as executable. + */ + if ((PHYSICAL_START > MEMORY_START) && + overlaps_interrupt_vector_text(vaddr, vaddr + step)) + tprot &= ~HPTE_R_N; + hash = hpt_hash(vpn, shift, ssize); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); diff --git a/arch/powerpc/mm/hugepage-hash64.c b/arch/powerpc/mm/hugepage-hash64.c index 34de9e0cdc3..826893fcb3a 100644 --- a/arch/powerpc/mm/hugepage-hash64.c +++ b/arch/powerpc/mm/hugepage-hash64.c @@ -127,7 +127,11 @@ repeat: /* Add in WIMG bits */ rflags |= (new_pmd & (_PAGE_WRITETHRU | _PAGE_NO_CACHE | - _PAGE_COHERENT | _PAGE_GUARDED)); + _PAGE_GUARDED)); + /* + * enable the memory coherence always + */ + rflags |= HPTE_R_M; /* Insert into the hash table, primary slot */ slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags, 0, diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c index 74551b5e41e..5e4ee257390 100644 --- a/arch/powerpc/mm/hugetlbpage-book3e.c +++ b/arch/powerpc/mm/hugetlbpage-book3e.c @@ -8,6 +8,44 @@ #include <linux/mm.h> #include <linux/hugetlb.h> +#ifdef CONFIG_PPC_FSL_BOOK3E +#ifdef CONFIG_PPC64 +static inline int tlb1_next(void) +{ + struct paca_struct *paca = get_paca(); + struct tlb_core_data *tcd; + int this, next; + + tcd = paca->tcd_ptr; + this = tcd->esel_next; + + next = this + 1; + if (next >= tcd->esel_max) + next = tcd->esel_first; + + tcd->esel_next = next; + return this; +} +#else +static inline int tlb1_next(void) +{ + int index, ncams; + + ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; + + index = __get_cpu_var(next_tlbcam_idx); + + /* Just round-robin the entries and wrap when we hit the end */ + if (unlikely(index == ncams - 1)) + __get_cpu_var(next_tlbcam_idx) = tlbcam_index; + else + __get_cpu_var(next_tlbcam_idx)++; + + return index; +} +#endif /* !PPC64 */ +#endif /* FSL */ + static inline int mmu_get_tsize(int psize) { return mmu_psize_defs[psize].enc; @@ -47,7 +85,7 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, struct mm_struct *mm; #ifdef CONFIG_PPC_FSL_BOOK3E - int index, ncams; + int index; #endif if (unlikely(is_kernel_addr(ea))) @@ -77,18 +115,11 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, } #ifdef CONFIG_PPC_FSL_BOOK3E - ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; - /* We have to use the CAM(TLB1) on FSL parts for hugepages */ - index = __get_cpu_var(next_tlbcam_idx); + index = tlb1_next(); mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1)); - - /* Just round-robin the entries and wrap when we hit the end */ - if (unlikely(index == ncams - 1)) - __get_cpu_var(next_tlbcam_idx) = tlbcam_index; - else - __get_cpu_var(next_tlbcam_idx)++; #endif + mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize); mas2 = ea & ~((1UL << shift) - 1); mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK; @@ -103,7 +134,8 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, if (mmu_has_feature(MMU_FTR_USE_PAIRED_MAS)) { mtspr(SPRN_MAS7_MAS3, mas7_3); } else { - mtspr(SPRN_MAS7, upper_32_bits(mas7_3)); + if (mmu_has_feature(MMU_FTR_BIG_PHYS)) + mtspr(SPRN_MAS7, upper_32_bits(mas7_3)); mtspr(SPRN_MAS3, lower_32_bits(mas7_3)); } diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c index 0b7fb676101..a5bcf930119 100644 --- a/arch/powerpc/mm/hugetlbpage-hash64.c +++ b/arch/powerpc/mm/hugetlbpage-hash64.c @@ -99,6 +99,10 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid, /* Add in WIMG bits */ rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT | _PAGE_GUARDED)); + /* + * enable the memory coherence always + */ + rflags |= HPTE_R_M; slot = hpte_insert_repeating(hash, vpn, pa, rflags, 0, mmu_psize, ssize); diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 90bb6d9409b..eb923654ba8 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -472,12 +472,13 @@ static void hugepd_free(struct mmu_gather *tlb, void *hugepte) { struct hugepd_freelist **batchp; - batchp = &__get_cpu_var(hugepd_freelist_cur); + batchp = &get_cpu_var(hugepd_freelist_cur); if (atomic_read(&tlb->mm->mm_users) < 2 || cpumask_equal(mm_cpumask(tlb->mm), cpumask_of(smp_processor_id()))) { kmem_cache_free(hugepte_cache, hugepte); + put_cpu_var(hugepd_freelist_cur); return; } @@ -491,6 +492,7 @@ static void hugepd_free(struct mmu_gather *tlb, void *hugepte) call_rcu_sched(&(*batchp)->rcu, hugepd_free_rcu_callback); *batchp = NULL; } + put_cpu_var(hugepd_freelist_cur); } #endif diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 8c1dd23652a..4b5cd5c2594 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -307,6 +307,12 @@ static void __init register_page_bootmem_info(void) void __init mem_init(void) { + /* + * book3s is limited to 16 page sizes due to encoding this in + * a 4-bit field for slices. + */ + BUILD_BUG_ON(MMU_PAGE_COUNT > 16); + #ifdef CONFIG_SWIOTLB swiotlb_init(0); #endif @@ -507,7 +513,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, * System memory should not be in /proc/iomem but various tools expect it * (eg kdump). */ -static int add_system_ram_resources(void) +static int __init add_system_ram_resources(void) { struct memblock_region *reg; diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 83eb5d5f53d..9615d82919b 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -148,6 +148,8 @@ extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); extern void adjust_total_lowmem(void); +extern int switch_to_as1(void); +extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu); #endif extern void loadcam_entry(unsigned int index); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 5a944f25e94..30a42e24bf1 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -31,6 +31,8 @@ #include <asm/sparsemem.h> #include <asm/prom.h> #include <asm/smp.h> +#include <asm/cputhreads.h> +#include <asm/topology.h> #include <asm/firmware.h> #include <asm/paca.h> #include <asm/hvcall.h> @@ -152,9 +154,22 @@ static void __init get_node_active_region(unsigned long pfn, } } -static void map_cpu_to_node(int cpu, int node) +static void reset_numa_cpu_lookup_table(void) +{ + unsigned int cpu; + + for_each_possible_cpu(cpu) + numa_cpu_lookup_table[cpu] = -1; +} + +static void update_numa_cpu_lookup_table(unsigned int cpu, int node) { numa_cpu_lookup_table[cpu] = node; +} + +static void map_cpu_to_node(int cpu, int node) +{ + update_numa_cpu_lookup_table(cpu, node); dbg("adding cpu %d to node %d\n", cpu, node); @@ -522,11 +537,24 @@ static int of_drconf_to_nid_single(struct of_drconf_cell *drmem, */ static int numa_setup_cpu(unsigned long lcpu) { - int nid = 0; - struct device_node *cpu = of_get_cpu_node(lcpu, NULL); + int nid; + struct device_node *cpu; + + /* + * If a valid cpu-to-node mapping is already available, use it + * directly instead of querying the firmware, since it represents + * the most recent mapping notified to us by the platform (eg: VPHN). + */ + if ((nid = numa_cpu_lookup_table[lcpu]) >= 0) { + map_cpu_to_node(lcpu, nid); + return nid; + } + + cpu = of_get_cpu_node(lcpu, NULL); if (!cpu) { WARN_ON(1); + nid = 0; goto out; } @@ -542,16 +570,38 @@ out: return nid; } +static void verify_cpu_node_mapping(int cpu, int node) +{ + int base, sibling, i; + + /* Verify that all the threads in the core belong to the same node */ + base = cpu_first_thread_sibling(cpu); + + for (i = 0; i < threads_per_core; i++) { + sibling = base + i; + + if (sibling == cpu || cpu_is_offline(sibling)) + continue; + + if (cpu_to_node(sibling) != node) { + WARN(1, "CPU thread siblings %d and %d don't belong" + " to the same node!\n", cpu, sibling); + break; + } + } +} + static int cpu_numa_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned long lcpu = (unsigned long)hcpu; - int ret = NOTIFY_DONE; + int ret = NOTIFY_DONE, nid; switch (action) { case CPU_UP_PREPARE: case CPU_UP_PREPARE_FROZEN: - numa_setup_cpu(lcpu); + nid = numa_setup_cpu(lcpu); + verify_cpu_node_mapping((int)lcpu, nid); ret = NOTIFY_OK; break; #ifdef CONFIG_HOTPLUG_CPU @@ -1069,6 +1119,7 @@ void __init do_init_bootmem(void) */ setup_node_to_cpumask_map(); + reset_numa_cpu_lookup_table(); register_cpu_notifier(&ppc64_numa_nb); cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE, (void *)(unsigned long)boot_cpuid); @@ -1447,6 +1498,33 @@ static int update_cpu_topology(void *data) return 0; } +static int update_lookup_table(void *data) +{ + struct topology_update_data *update; + + if (!data) + return -EINVAL; + + /* + * Upon topology update, the numa-cpu lookup table needs to be updated + * for all threads in the core, including offline CPUs, to ensure that + * future hotplug operations respect the cpu-to-node associativity + * properly. + */ + for (update = data; update; update = update->next) { + int nid, base, j; + + nid = update->new_nid; + base = cpu_first_thread_sibling(update->cpu); + + for (j = 0; j < threads_per_core; j++) { + update_numa_cpu_lookup_table(base + j, nid); + } + } + + return 0; +} + /* * Update the node maps and sysfs entries for each cpu whose home node * has changed. Returns 1 when the topology has changed, and 0 otherwise. @@ -1515,6 +1593,14 @@ int arch_update_cpu_topology(void) stop_machine(update_cpu_topology, &updates[0], &updated_cpus); + /* + * Update the numa-cpu lookup table with the new mappings, even for + * offline CPUs. It is best to perform this update from the stop- + * machine context. + */ + stop_machine(update_lookup_table, &updates[0], + cpumask_of(raw_smp_processor_id())); + for (ud = &updates[0]; ud; ud = ud->next) { unregister_cpu_under_node(ud->cpu, ud->old_nid); register_cpu_under_node(ud->cpu, ud->new_nid); @@ -1699,7 +1785,7 @@ static const struct file_operations topology_ops = { static int topology_update_init(void) { start_topology_update(); - proc_create("powerpc/topology_updates", 644, NULL, &topology_ops); + proc_create("powerpc/topology_updates", 0644, NULL, &topology_ops); return 0; } diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index 841e0d00863..c695943a513 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -24,7 +24,6 @@ #include <linux/kernel.h> #include <linux/gfp.h> #include <linux/mm.h> -#include <linux/init.h> #include <linux/percpu.h> #include <linux/hardirq.h> #include <linux/hugetlb.h> @@ -174,7 +173,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { #ifdef CONFIG_DEBUG_VM - WARN_ON(pte_present(*ptep)); + WARN_ON(pte_val(*ptep) & _PAGE_PRESENT); #endif /* Note: mm->context.id might not yet have been assigned as * this context might not have been activated yet when this diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 5b960171528..343a87fa78b 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -299,6 +299,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); } + smp_wmb(); return err; } diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 9d95786aa80..62bf5e8e78d 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -33,7 +33,6 @@ #include <linux/swap.h> #include <linux/stddef.h> #include <linux/vmalloc.h> -#include <linux/init.h> #include <linux/bootmem.h> #include <linux/memblock.h> #include <linux/slab.h> @@ -153,6 +152,18 @@ int map_kernel_page(unsigned long ea, unsigned long pa, int flags) } #endif /* !CONFIG_PPC_MMU_NOHASH */ } + +#ifdef CONFIG_PPC_BOOK3E_64 + /* + * With hardware tablewalk, a sync is needed to ensure that + * subsequent accesses see the PTE we just wrote. Unlike userspace + * mappings, we can't tolerate spurious faults, so make sure + * the new PTE will be seen the first time. + */ + mb(); +#else + smp_wmb(); +#endif return 0; } @@ -499,7 +510,8 @@ int pmdp_set_access_flags(struct vm_area_struct *vma, unsigned long address, } unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr, - pmd_t *pmdp, unsigned long clr) + pmd_t *pmdp, unsigned long clr, + unsigned long set) { unsigned long old, tmp; @@ -515,14 +527,15 @@ unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr, andi. %1,%0,%6\n\ bne- 1b \n\ andc %1,%0,%4 \n\ + or %1,%1,%7\n\ stdcx. %1,0,%3 \n\ bne- 1b" : "=&r" (old), "=&r" (tmp), "=m" (*pmdp) - : "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY) + : "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY), "r" (set) : "cc" ); #else old = pmd_val(*pmdp); - *pmdp = __pmd(old & ~clr); + *pmdp = __pmd((old & ~clr) | set); #endif if (old & _PAGE_HASHPTE) hpte_do_hugepage_flush(mm, addr, pmdp); @@ -687,7 +700,7 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp, pmd_t pmd) { #ifdef CONFIG_DEBUG_VM - WARN_ON(!pmd_none(*pmdp)); + WARN_ON(pmd_val(*pmdp) & _PAGE_PRESENT); assert_spin_locked(&mm->page_table_lock); WARN_ON(!pmd_trans_huge(pmd)); #endif @@ -697,7 +710,7 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr, void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp) { - pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT); + pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT, 0); } /* @@ -824,7 +837,7 @@ pmd_t pmdp_get_and_clear(struct mm_struct *mm, unsigned long old; pgtable_t *pgtable_slot; - old = pmd_hugepage_update(mm, addr, pmdp, ~0UL); + old = pmd_hugepage_update(mm, addr, pmdp, ~0UL, 0); old_pmd = __pmd(old); /* * We have pmd == none and we are holding page_table_lock. diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c index 7ce9cf3b698..b0c75cc15ef 100644 --- a/arch/powerpc/mm/slice.c +++ b/arch/powerpc/mm/slice.c @@ -408,7 +408,7 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len, if (fixed && (addr & ((1ul << pshift) - 1))) return -EINVAL; if (fixed && addr > (mm->task_size - len)) - return -EINVAL; + return -ENOMEM; /* If hint, make sure it matches our alignment restrictions */ if (!fixed && addr) { diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c index a770df2dae7..6c0b1f5f8d2 100644 --- a/arch/powerpc/mm/subpage-prot.c +++ b/arch/powerpc/mm/subpage-prot.c @@ -78,7 +78,7 @@ static void hpte_flush_range(struct mm_struct *mm, unsigned long addr, pte = pte_offset_map_lock(mm, pmd, addr, &ptl); arch_enter_lazy_mmu_mode(); for (; npages > 0; --npages) { - pte_update(mm, addr, pte, 0, 0); + pte_update(mm, addr, pte, 0, 0, 0); addr += PAGE_SIZE; ++pte; } diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 36e44b4260e..c99f6510a0b 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -23,7 +23,6 @@ #include <linux/kernel.h> #include <linux/mm.h> -#include <linux/init.h> #include <linux/percpu.h> #include <linux/hardirq.h> #include <asm/pgalloc.h> diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index b4113bf8635..c95eb323e9a 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -136,7 +136,7 @@ BEGIN_MMU_FTR_SECTION */ PPC_TLBSRX_DOT(0,R16) ldx r14,r14,r15 /* grab pgd entry */ - beq normal_tlb_miss_done /* tlb exists already, bail */ + beq tlb_miss_done_bolted /* tlb exists already, bail */ MMU_FTR_SECTION_ELSE ldx r14,r14,r15 /* grab pgd entry */ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) @@ -192,6 +192,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) mtspr SPRN_MAS7_MAS3,r15 tlbwe +tlb_miss_done_bolted: TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) tlb_epilog_bolted rfi @@ -239,6 +240,178 @@ itlb_miss_fault_bolted: beq tlb_miss_common_bolted b itlb_miss_kernel_bolted +#ifdef CONFIG_PPC_FSL_BOOK3E +/* + * TLB miss handling for e6500 and derivatives, using hardware tablewalk. + * + * Linear mapping is bolted: no virtual page table or nested TLB misses + * Indirect entries in TLB1, hardware loads resulting direct entries + * into TLB0 + * No HES or NV hint on TLB1, so we need to do software round-robin + * No tlbsrx. so we need a spinlock, and we have to deal + * with MAS-damage caused by tlbsx + * 4K pages only + */ + + START_EXCEPTION(instruction_tlb_miss_e6500) + tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0 + + ld r11,PACA_TCD_PTR(r13) + srdi. r15,r16,60 /* get region */ + ori r16,r16,1 + + TLB_MISS_STATS_SAVE_INFO_BOLTED + bne tlb_miss_kernel_e6500 /* user/kernel test */ + + b tlb_miss_common_e6500 + + START_EXCEPTION(data_tlb_miss_e6500) + tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR + + ld r11,PACA_TCD_PTR(r13) + srdi. r15,r16,60 /* get region */ + rldicr r16,r16,0,62 + + TLB_MISS_STATS_SAVE_INFO_BOLTED + bne tlb_miss_kernel_e6500 /* user vs kernel check */ + +/* + * This is the guts of the TLB miss handler for e6500 and derivatives. + * We are entered with: + * + * r16 = page of faulting address (low bit 0 if data, 1 if instruction) + * r15 = crap (free to use) + * r14 = page table base + * r13 = PACA + * r11 = tlb_per_core ptr + * r10 = crap (free to use) + */ +tlb_miss_common_e6500: + /* + * Search if we already have an indirect entry for that virtual + * address, and if we do, bail out. + * + * MAS6:IND should be already set based on MAS4 + */ + addi r10,r11,TCD_LOCK +1: lbarx r15,0,r10 + cmpdi r15,0 + bne 2f + li r15,1 + stbcx. r15,0,r10 + bne 1b + .subsection 1 +2: lbz r15,0(r10) + cmpdi r15,0 + bne 2b + b 1b + .previous + + mfspr r15,SPRN_MAS2 + + tlbsx 0,r16 + mfspr r10,SPRN_MAS1 + andis. r10,r10,MAS1_VALID@h + bne tlb_miss_done_e6500 + + /* Undo MAS-damage from the tlbsx */ + mfspr r10,SPRN_MAS1 + oris r10,r10,MAS1_VALID@h + mtspr SPRN_MAS1,r10 + mtspr SPRN_MAS2,r15 + + /* Now, we need to walk the page tables. First check if we are in + * range. + */ + rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 + bne- tlb_miss_fault_e6500 + + rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3 + cmpldi cr0,r14,0 + clrrdi r15,r15,3 + beq- tlb_miss_fault_e6500 /* No PGDIR, bail */ + ldx r14,r14,r15 /* grab pgd entry */ + + rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3 + clrrdi r15,r15,3 + cmpdi cr0,r14,0 + bge tlb_miss_fault_e6500 /* Bad pgd entry or hugepage; bail */ + ldx r14,r14,r15 /* grab pud entry */ + + rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3 + clrrdi r15,r15,3 + cmpdi cr0,r14,0 + bge tlb_miss_fault_e6500 + ldx r14,r14,r15 /* Grab pmd entry */ + + mfspr r10,SPRN_MAS0 + cmpdi cr0,r14,0 + bge tlb_miss_fault_e6500 + + /* Now we build the MAS for a 2M indirect page: + * + * MAS 0 : ESEL needs to be filled by software round-robin + * MAS 1 : Fully set up + * - PID already updated by caller if necessary + * - TSIZE for now is base ind page size always + * - TID already cleared if necessary + * MAS 2 : Default not 2M-aligned, need to be redone + * MAS 3+7 : Needs to be done + */ + + ori r14,r14,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT) + mtspr SPRN_MAS7_MAS3,r14 + + clrrdi r15,r16,21 /* make EA 2M-aligned */ + mtspr SPRN_MAS2,r15 + + lbz r15,TCD_ESEL_NEXT(r11) + lbz r16,TCD_ESEL_MAX(r11) + lbz r14,TCD_ESEL_FIRST(r11) + rlwimi r10,r15,16,0x00ff0000 /* insert esel_next into MAS0 */ + addi r15,r15,1 /* increment esel_next */ + mtspr SPRN_MAS0,r10 + cmpw r15,r16 + iseleq r15,r14,r15 /* if next == last use first */ + stb r15,TCD_ESEL_NEXT(r11) + + tlbwe + +tlb_miss_done_e6500: + .macro tlb_unlock_e6500 + li r15,0 + isync + stb r15,TCD_LOCK(r11) + .endm + + tlb_unlock_e6500 + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) + tlb_epilog_bolted + rfi + +tlb_miss_kernel_e6500: + mfspr r10,SPRN_MAS1 + ld r14,PACA_KERNELPGD(r13) + cmpldi cr0,r15,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + beq+ tlb_miss_common_e6500 + +tlb_miss_fault_e6500: + tlb_unlock_e6500 + /* We need to check if it was an instruction miss */ + andi. r16,r16,1 + bne itlb_miss_fault_e6500 +dtlb_miss_fault_e6500: + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) + tlb_epilog_bolted + b exc_data_storage_book3e +itlb_miss_fault_e6500: + TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) + tlb_epilog_bolted + b exc_instruction_storage_book3e +#endif /* CONFIG_PPC_FSL_BOOK3E */ + /********************************************************************** * * * TLB miss handling for Book3E with TLB reservation and HES support * diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 358d7430313..b37a58e1c92 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -43,6 +43,7 @@ #include <asm/tlb.h> #include <asm/code-patching.h> #include <asm/hugetlb.h> +#include <asm/paca.h> #include "mmu_decl.h" @@ -58,6 +59,10 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { .shift = 12, .enc = BOOK3E_PAGESZ_4K, }, + [MMU_PAGE_2M] = { + .shift = 21, + .enc = BOOK3E_PAGESZ_2M, + }, [MMU_PAGE_4M] = { .shift = 22, .enc = BOOK3E_PAGESZ_4M, @@ -136,7 +141,7 @@ static inline int mmu_get_tsize(int psize) int mmu_linear_psize; /* Page size used for the linear mapping */ int mmu_pte_psize; /* Page size used for PTE pages */ int mmu_vmemmap_psize; /* Page size used for the virtual mem map */ -int book3e_htw_enabled; /* Is HW tablewalk enabled ? */ +int book3e_htw_mode; /* HW tablewalk? Value is PPC_HTW_* */ unsigned long linear_map_top; /* Top of linear mapping */ #endif /* CONFIG_PPC64 */ @@ -377,7 +382,7 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) { int tsize = mmu_psize_defs[mmu_pte_psize].enc; - if (book3e_htw_enabled) { + if (book3e_htw_mode != PPC_HTW_NONE) { unsigned long start = address & PMD_MASK; unsigned long end = address + PMD_SIZE; unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift; @@ -430,7 +435,7 @@ static void setup_page_sizes(void) def = &mmu_psize_defs[psize]; shift = def->shift; - if (shift == 0) + if (shift == 0 || shift & 1) continue; /* adjust to be in terms of 4^shift Kb */ @@ -440,21 +445,40 @@ static void setup_page_sizes(void) def->flags |= MMU_PAGE_SIZE_DIRECT; } - goto no_indirect; + goto out; } if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) { - u32 tlb1ps = mfspr(SPRN_TLB1PS); + u32 tlb1cfg, tlb1ps; + + tlb0cfg = mfspr(SPRN_TLB0CFG); + tlb1cfg = mfspr(SPRN_TLB1CFG); + tlb1ps = mfspr(SPRN_TLB1PS); + eptcfg = mfspr(SPRN_EPTCFG); + + if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT)) + book3e_htw_mode = PPC_HTW_E6500; + + /* + * We expect 4K subpage size and unrestricted indirect size. + * The lack of a restriction on indirect size is a Freescale + * extension, indicated by PSn = 0 but SPSn != 0. + */ + if (eptcfg != 2) + book3e_htw_mode = PPC_HTW_NONE; for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { struct mmu_psize_def *def = &mmu_psize_defs[psize]; if (tlb1ps & (1U << (def->shift - 10))) { def->flags |= MMU_PAGE_SIZE_DIRECT; + + if (book3e_htw_mode && psize == MMU_PAGE_2M) + def->flags |= MMU_PAGE_SIZE_INDIRECT; } } - goto no_indirect; + goto out; } #endif @@ -471,8 +495,11 @@ static void setup_page_sizes(void) } /* Indirect page sizes supported ? */ - if ((tlb0cfg & TLBnCFG_IND) == 0) - goto no_indirect; + if ((tlb0cfg & TLBnCFG_IND) == 0 || + (tlb0cfg & TLBnCFG_PT) == 0) + goto out; + + book3e_htw_mode = PPC_HTW_IBM; /* Now, we only deal with one IND page size for each * direct size. Hopefully all implementations today are @@ -497,8 +524,8 @@ static void setup_page_sizes(void) def->ind = ps + 10; } } - no_indirect: +out: /* Cleanup array and print summary */ pr_info("MMU: Supported page sizes\n"); for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { @@ -518,44 +545,27 @@ static void setup_page_sizes(void) } } -static void __patch_exception(int exc, unsigned long addr) -{ - extern unsigned int interrupt_base_book3e; - unsigned int *ibase = &interrupt_base_book3e; - - /* Our exceptions vectors start with a NOP and -then- a branch - * to deal with single stepping from userspace which stops on - * the second instruction. Thus we need to patch the second - * instruction of the exception, not the first one - */ - - patch_branch(ibase + (exc / 4) + 1, addr, 0); -} - -#define patch_exception(exc, name) do { \ - extern unsigned int name; \ - __patch_exception((exc), (unsigned long)&name); \ -} while (0) - static void setup_mmu_htw(void) { - /* Check if HW tablewalk is present, and if yes, enable it by: - * - * - patching the TLB miss handlers to branch to the - * one dedicates to it - * - * - setting the global book3e_htw_enabled - */ - unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + /* + * If we want to use HW tablewalk, enable it by patching the TLB miss + * handlers to branch to the one dedicated to it. + */ - if ((tlb0cfg & TLBnCFG_IND) && - (tlb0cfg & TLBnCFG_PT)) { + switch (book3e_htw_mode) { + case PPC_HTW_IBM: patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e); patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e); - book3e_htw_enabled = 1; + break; +#ifdef CONFIG_PPC_FSL_BOOK3E + case PPC_HTW_E6500: + patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e); + patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e); + break; +#endif } pr_info("MMU: Book3E HW tablewalk %s\n", - book3e_htw_enabled ? "enabled" : "not supported"); + book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported"); } /* @@ -595,8 +605,16 @@ static void __early_init_mmu(int boot_cpu) /* Set MAS4 based on page table setting */ mas4 = 0x4 << MAS4_WIMGED_SHIFT; - if (book3e_htw_enabled) { - mas4 |= mas4 | MAS4_INDD; + switch (book3e_htw_mode) { + case PPC_HTW_E6500: + mas4 |= MAS4_INDD; + mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT; + mas4 |= MAS4_TLBSELD(1); + mmu_pte_psize = MMU_PAGE_2M; + break; + + case PPC_HTW_IBM: + mas4 |= MAS4_INDD; #ifdef CONFIG_PPC_64K_PAGES mas4 |= BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT; mmu_pte_psize = MMU_PAGE_256M; @@ -604,13 +622,16 @@ static void __early_init_mmu(int boot_cpu) mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT; mmu_pte_psize = MMU_PAGE_1M; #endif - } else { + break; + + case PPC_HTW_NONE: #ifdef CONFIG_PPC_64K_PAGES mas4 |= BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT; #else mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT; #endif mmu_pte_psize = mmu_virtual_psize; + break; } mtspr(SPRN_MAS4, mas4); @@ -630,8 +651,11 @@ static void __early_init_mmu(int boot_cpu) /* limit memory so we dont have linear faults */ memblock_enforce_memory_limit(linear_map_top); - patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e); - patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e); + if (book3e_htw_mode == PPC_HTW_NONE) { + patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e); + patch_exception(0x1e0, + exc_instruction_tlb_miss_bolted_book3e); + } } #endif diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 626ad081639..43ff3c797fb 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -402,7 +402,9 @@ _GLOBAL(set_context) * Load TLBCAM[index] entry in to the L2 CAM MMU */ _GLOBAL(loadcam_entry) - LOAD_REG_ADDR(r4, TLBCAM) + mflr r5 + LOAD_REG_ADDR_PIC(r4, TLBCAM) + mtlr r5 mulli r5,r3,TLBCAM_SIZE add r3,r5,r4 lwz r4,TLBCAM_MAS0(r3) diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c index ff617246d12..d29b6e4e5e7 100644 --- a/arch/powerpc/oprofile/op_model_7450.c +++ b/arch/powerpc/oprofile/op_model_7450.c @@ -16,7 +16,6 @@ */ #include <linux/oprofile.h> -#include <linux/init.h> #include <linux/smp.h> #include <asm/ptrace.h> #include <asm/processor.h> diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index b9589c19ccd..1f0ebdeea5f 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -16,7 +16,6 @@ #include <linux/cpufreq.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/jiffies.h> #include <linux/kthread.h> #include <linux/oprofile.h> diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c index 2a82d3ed464..14cf86fddda 100644 --- a/arch/powerpc/oprofile/op_model_fsl_emb.c +++ b/arch/powerpc/oprofile/op_model_fsl_emb.c @@ -14,7 +14,6 @@ */ #include <linux/oprofile.h> -#include <linux/init.h> #include <linux/smp.h> #include <asm/ptrace.h> #include <asm/processor.h> diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c index 42f778dff91..a114a7c22d4 100644 --- a/arch/powerpc/oprofile/op_model_pa6t.c +++ b/arch/powerpc/oprofile/op_model_pa6t.c @@ -22,7 +22,6 @@ */ #include <linux/oprofile.h> -#include <linux/init.h> #include <linux/smp.h> #include <linux/percpu.h> #include <asm/processor.h> diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index f444b94935f..962fe7b3e3f 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -10,7 +10,6 @@ */ #include <linux/oprofile.h> -#include <linux/init.h> #include <linux/smp.h> #include <asm/firmware.h> #include <asm/ptrace.h> diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c index 9b801b8c8c5..7e5b8ed3a1b 100644 --- a/arch/powerpc/oprofile/op_model_rs64.c +++ b/arch/powerpc/oprofile/op_model_rs64.c @@ -8,7 +8,6 @@ */ #include <linux/oprofile.h> -#include <linux/init.h> #include <linux/smp.h> #include <asm/ptrace.h> #include <asm/processor.h> diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 29b89e863d7..67cf22083f4 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1147,6 +1147,9 @@ static void power_pmu_enable(struct pmu *pmu) mmcr0 = ebb_switch_in(ebb, cpuhw->mmcr[0]); mb(); + if (cpuhw->bhrb_users) + ppmu->config_bhrb(cpuhw->bhrb_filter); + write_mmcr0(cpuhw, mmcr0); /* @@ -1158,8 +1161,6 @@ static void power_pmu_enable(struct pmu *pmu) } out: - if (cpuhw->bhrb_users) - ppmu->config_bhrb(cpuhw->bhrb_filter); local_irq_restore(flags); } diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c index a3f7abd2f13..96cee20dcd3 100644 --- a/arch/powerpc/perf/power8-pmu.c +++ b/arch/powerpc/perf/power8-pmu.c @@ -25,6 +25,37 @@ #define PM_BRU_FIN 0x10068 #define PM_BR_MPRED_CMPL 0x400f6 +/* All L1 D cache load references counted at finish, gated by reject */ +#define PM_LD_REF_L1 0x100ee +/* Load Missed L1 */ +#define PM_LD_MISS_L1 0x3e054 +/* Store Missed L1 */ +#define PM_ST_MISS_L1 0x300f0 +/* L1 cache data prefetches */ +#define PM_L1_PREF 0x0d8b8 +/* Instruction fetches from L1 */ +#define PM_INST_FROM_L1 0x04080 +/* Demand iCache Miss */ +#define PM_L1_ICACHE_MISS 0x200fd +/* Instruction Demand sectors wriittent into IL1 */ +#define PM_L1_DEMAND_WRITE 0x0408c +/* Instruction prefetch written into IL1 */ +#define PM_IC_PREF_WRITE 0x0408e +/* The data cache was reloaded from local core's L3 due to a demand load */ +#define PM_DATA_FROM_L3 0x4c042 +/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */ +#define PM_DATA_FROM_L3MISS 0x300fe +/* All successful D-side store dispatches for this thread */ +#define PM_L2_ST 0x17080 +/* All successful D-side store dispatches for this thread that were L2 Miss */ +#define PM_L2_ST_MISS 0x17082 +/* Total HW L3 prefetches(Load+store) */ +#define PM_L3_PREF_ALL 0x4e052 +/* Data PTEG reload */ +#define PM_DTLB_MISS 0x300fc +/* ITLB Reloaded */ +#define PM_ITLB_MISS 0x400fc + /* * Raw event encoding for POWER8: @@ -557,6 +588,8 @@ static int power8_generic_events[] = { [PERF_COUNT_HW_INSTRUCTIONS] = PM_INST_CMPL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PM_BRU_FIN, [PERF_COUNT_HW_BRANCH_MISSES] = PM_BR_MPRED_CMPL, + [PERF_COUNT_HW_CACHE_REFERENCES] = PM_LD_REF_L1, + [PERF_COUNT_HW_CACHE_MISSES] = PM_LD_MISS_L1, }; static u64 power8_bhrb_filter_map(u64 branch_sample_type) @@ -596,6 +629,116 @@ static void power8_config_bhrb(u64 pmu_bhrb_filter) mtspr(SPRN_MMCRA, (mfspr(SPRN_MMCRA) | pmu_bhrb_filter)); } +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [ C(L1D) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = PM_LD_REF_L1, + [ C(RESULT_MISS) ] = PM_LD_MISS_L1, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = PM_ST_MISS_L1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = PM_L1_PREF, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(L1I) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = PM_INST_FROM_L1, + [ C(RESULT_MISS) ] = PM_L1_ICACHE_MISS, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = PM_L1_DEMAND_WRITE, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = PM_IC_PREF_WRITE, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(LL) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = PM_DATA_FROM_L3, + [ C(RESULT_MISS) ] = PM_DATA_FROM_L3MISS, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = PM_L2_ST, + [ C(RESULT_MISS) ] = PM_L2_ST_MISS, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = PM_L3_PREF_ALL, + [ C(RESULT_MISS) ] = 0, + }, + }, + [ C(DTLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = PM_DTLB_MISS, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + [ C(ITLB) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = 0, + [ C(RESULT_MISS) ] = PM_ITLB_MISS, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + [ C(BPU) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = PM_BRU_FIN, + [ C(RESULT_MISS) ] = PM_BR_MPRED_CMPL, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, + [ C(NODE) ] = { + [ C(OP_READ) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_WRITE) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + [ C(OP_PREFETCH) ] = { + [ C(RESULT_ACCESS) ] = -1, + [ C(RESULT_MISS) ] = -1, + }, + }, +}; + +#undef C + static struct power_pmu power8_pmu = { .name = "POWER8", .n_counter = 6, @@ -611,6 +754,7 @@ static struct power_pmu power8_pmu = { .flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB, .n_generic = ARRAY_SIZE(power8_generic_events), .generic_events = power8_generic_events, + .cache_events = &power8_cache_events, .attr_groups = power8_pmu_attr_groups, .bhrb_nr = 32, }; diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index fc9c1cbfcb1..5aa3f4b5332 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -1,9 +1,9 @@ config PPC_MPC512x bool "512x-based boards" depends on 6xx + select COMMON_CLK select FSL_SOC select IPIC - select PPC_CLOCK select PPC_PCI_CHOICE select FSL_PCI if PCI select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile index 72fb9340e09..01693121a2b 100644 --- a/arch/powerpc/platforms/512x/Makefile +++ b/arch/powerpc/platforms/512x/Makefile @@ -1,7 +1,8 @@ # # Makefile for the Freescale PowerPC 512x linux kernel. # -obj-y += clock.o mpc512x_shared.o +obj-$(CONFIG_COMMON_CLK) += clock-commonclk.o +obj-y += mpc512x_shared.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o obj-$(CONFIG_MPC512x_GENERIC) += mpc512x_generic.o obj-$(CONFIG_PDM360NG) += pdm360ng.o diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c new file mode 100644 index 00000000000..6eb614a271f --- /dev/null +++ b/arch/powerpc/platforms/512x/clock-commonclk.c @@ -0,0 +1,1221 @@ +/* + * Copyright (C) 2013 DENX Software Engineering + * + * Gerhard Sittig, <gsi@denx.de> + * + * common clock driver support for the MPC512x platform + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/bitops.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/mpc5121.h> +#include <dt-bindings/clock/mpc512x-clock.h> + +#include "mpc512x.h" /* our public mpc5121_clk_init() API */ + +/* helpers to keep the MCLK intermediates "somewhere" in our table */ +enum { + MCLK_IDX_MUX0, + MCLK_IDX_EN0, + MCLK_IDX_DIV0, + MCLK_MAX_IDX, +}; + +#define NR_PSCS 12 +#define NR_MSCANS 4 +#define NR_SPDIFS 1 +#define NR_OUTCLK 4 +#define NR_MCLKS (NR_PSCS + NR_MSCANS + NR_SPDIFS + NR_OUTCLK) + +/* extend the public set of clocks by adding internal slots for management */ +enum { + /* arrange for adjacent numbers after the public set */ + MPC512x_CLK_START_PRIVATE = MPC512x_CLK_LAST_PUBLIC, + /* clocks which aren't announced to the public */ + MPC512x_CLK_DDR, + MPC512x_CLK_MEM, + MPC512x_CLK_IIM, + /* intermediates in div+gate combos or fractional dividers */ + MPC512x_CLK_DDR_UG, + MPC512x_CLK_SDHC_x4, + MPC512x_CLK_SDHC_UG, + MPC512x_CLK_SDHC2_UG, + MPC512x_CLK_DIU_x4, + MPC512x_CLK_DIU_UG, + MPC512x_CLK_MBX_BUS_UG, + MPC512x_CLK_MBX_UG, + MPC512x_CLK_MBX_3D_UG, + MPC512x_CLK_PCI_UG, + MPC512x_CLK_NFC_UG, + MPC512x_CLK_LPC_UG, + MPC512x_CLK_SPDIF_TX_IN, + /* intermediates for the mux+gate+div+mux MCLK generation */ + MPC512x_CLK_MCLKS_FIRST, + MPC512x_CLK_MCLKS_LAST = MPC512x_CLK_MCLKS_FIRST + + NR_MCLKS * MCLK_MAX_IDX, + /* internal, symbolic spec for the number of slots */ + MPC512x_CLK_LAST_PRIVATE, +}; + +/* data required for the OF clock provider registration */ +static struct clk *clks[MPC512x_CLK_LAST_PRIVATE]; +static struct clk_onecell_data clk_data; + +/* CCM register access */ +static struct mpc512x_ccm __iomem *clkregs; +static DEFINE_SPINLOCK(clklock); + +/* SoC variants {{{ */ + +/* + * tell SoC variants apart as they are rather similar yet not identical, + * cache the result in an enum to not repeatedly run the expensive OF test + * + * MPC5123 is an MPC5121 without the MBX graphics accelerator + * + * MPC5125 has many more differences: no MBX, no AXE, no VIU, no SPDIF, + * no PATA, no SATA, no PCI, two FECs (of different compatibility name), + * only 10 PSCs (of different compatibility name), two SDHCs, different + * NFC IP block, output clocks, system PLL status query, different CPMF + * interpretation, no CFM, different fourth PSC/CAN mux0 input -- yet + * those differences can get folded into this clock provider support + * code and don't warrant a separate highly redundant implementation + */ + +static enum soc_type { + MPC512x_SOC_MPC5121, + MPC512x_SOC_MPC5123, + MPC512x_SOC_MPC5125, +} soc; + +static void mpc512x_clk_determine_soc(void) +{ + if (of_machine_is_compatible("fsl,mpc5121")) { + soc = MPC512x_SOC_MPC5121; + return; + } + if (of_machine_is_compatible("fsl,mpc5123")) { + soc = MPC512x_SOC_MPC5123; + return; + } + if (of_machine_is_compatible("fsl,mpc5125")) { + soc = MPC512x_SOC_MPC5125; + return; + } +} + +static bool soc_has_mbx(void) +{ + if (soc == MPC512x_SOC_MPC5121) + return true; + return false; +} + +static bool soc_has_axe(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_viu(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_spdif(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_pata(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_sata(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_pci(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_fec2(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static int soc_max_pscnum(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return 10; + return 12; +} + +static bool soc_has_sdhc2(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static bool soc_has_nfc_5125(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static bool soc_has_outclk(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static bool soc_has_cpmf_0_bypass(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static bool soc_has_mclk_mux0_canin(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +/* }}} SoC variants */ +/* common clk API wrappers {{{ */ + +/* convenience wrappers around the common clk API */ +static inline struct clk *mpc512x_clk_fixed(const char *name, int rate) +{ + return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); +} + +static inline struct clk *mpc512x_clk_factor( + const char *name, const char *parent_name, + int mul, int div) +{ + int clkflags; + + clkflags = CLK_SET_RATE_PARENT; + return clk_register_fixed_factor(NULL, name, parent_name, clkflags, + mul, div); +} + +static inline struct clk *mpc512x_clk_divider( + const char *name, const char *parent_name, u8 clkflags, + u32 __iomem *reg, u8 pos, u8 len, int divflags) +{ + return clk_register_divider(NULL, name, parent_name, clkflags, + reg, pos, len, divflags, &clklock); +} + +static inline struct clk *mpc512x_clk_divtable( + const char *name, const char *parent_name, + u32 __iomem *reg, u8 pos, u8 len, + const struct clk_div_table *divtab) +{ + u8 divflags; + + divflags = 0; + return clk_register_divider_table(NULL, name, parent_name, 0, + reg, pos, len, divflags, + divtab, &clklock); +} + +static inline struct clk *mpc512x_clk_gated( + const char *name, const char *parent_name, + u32 __iomem *reg, u8 pos) +{ + int clkflags; + + clkflags = CLK_SET_RATE_PARENT; + return clk_register_gate(NULL, name, parent_name, clkflags, + reg, pos, 0, &clklock); +} + +static inline struct clk *mpc512x_clk_muxed(const char *name, + const char **parent_names, int parent_count, + u32 __iomem *reg, u8 pos, u8 len) +{ + int clkflags; + u8 muxflags; + + clkflags = CLK_SET_RATE_PARENT; + muxflags = 0; + return clk_register_mux(NULL, name, + parent_names, parent_count, clkflags, + reg, pos, len, muxflags, &clklock); +} + +/* }}} common clk API wrappers */ + +/* helper to isolate a bit field from a register */ +static inline int get_bit_field(uint32_t __iomem *reg, uint8_t pos, uint8_t len) +{ + uint32_t val; + + val = in_be32(reg); + val >>= pos; + val &= (1 << len) - 1; + return val; +} + +/* get the SPMF and translate it into the "sys pll" multiplier */ +static int get_spmf_mult(void) +{ + static int spmf_to_mult[] = { + 68, 1, 12, 16, 20, 24, 28, 32, + 36, 40, 44, 48, 52, 56, 60, 64, + }; + int spmf; + + spmf = get_bit_field(&clkregs->spmr, 24, 4); + return spmf_to_mult[spmf]; +} + +/* + * get the SYS_DIV value and translate it into a divide factor + * + * values returned from here are a multiple of the real factor since the + * divide ratio is fractional + */ +static int get_sys_div_x2(void) +{ + static int sysdiv_code_to_x2[] = { + 4, 5, 6, 7, 8, 9, 10, 14, + 12, 16, 18, 22, 20, 24, 26, 30, + 28, 32, 34, 38, 36, 40, 42, 46, + 44, 48, 50, 54, 52, 56, 58, 62, + 60, 64, 66, + }; + int divcode; + + divcode = get_bit_field(&clkregs->scfr2, 26, 6); + return sysdiv_code_to_x2[divcode]; +} + +/* + * get the CPMF value and translate it into a multiplier factor + * + * values returned from here are a multiple of the real factor since the + * multiplier ratio is fractional + */ +static int get_cpmf_mult_x2(void) +{ + static int cpmf_to_mult_x36[] = { + /* 0b000 is "times 36" */ + 72, 2, 2, 3, 4, 5, 6, 7, + }; + static int cpmf_to_mult_0by[] = { + /* 0b000 is "bypass" */ + 2, 2, 2, 3, 4, 5, 6, 7, + }; + + int *cpmf_to_mult; + int cpmf; + + cpmf = get_bit_field(&clkregs->spmr, 16, 4); + if (soc_has_cpmf_0_bypass()) + cpmf_to_mult = cpmf_to_mult_0by; + else + cpmf_to_mult = cpmf_to_mult_x36; + return cpmf_to_mult[cpmf]; +} + +/* + * some of the clock dividers do scale in a linear way, yet not all of + * their bit combinations are legal; use a divider table to get a + * resulting set of applicable divider values + */ + +/* applies to the IPS_DIV, and PCI_DIV values */ +static struct clk_div_table divtab_2346[] = { + { .val = 2, .div = 2, }, + { .val = 3, .div = 3, }, + { .val = 4, .div = 4, }, + { .val = 6, .div = 6, }, + { .div = 0, }, +}; + +/* applies to the MBX_DIV, LPC_DIV, and NFC_DIV values */ +static struct clk_div_table divtab_1234[] = { + { .val = 1, .div = 1, }, + { .val = 2, .div = 2, }, + { .val = 3, .div = 3, }, + { .val = 4, .div = 4, }, + { .div = 0, }, +}; + +static int get_freq_from_dt(char *propname) +{ + struct device_node *np; + const unsigned int *prop; + int val; + + val = 0; + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr"); + if (np) { + prop = of_get_property(np, propname, NULL); + if (prop) + val = *prop; + of_node_put(np); + } + return val; +} + +static void mpc512x_clk_preset_data(void) +{ + size_t i; + + for (i = 0; i < ARRAY_SIZE(clks); i++) + clks[i] = ERR_PTR(-ENODEV); +} + +/* + * - receives the "bus frequency" from the caller (that's the IPS clock + * rate, the historical source of clock information) + * - fetches the system PLL multiplier and divider values as well as the + * IPS divider value from hardware + * - determines the REF clock rate either from the XTAL/OSC spec (if + * there is a device tree node describing the oscillator) or from the + * IPS bus clock (supported for backwards compatibility, such that + * setups without XTAL/OSC specs keep working) + * - creates the "ref" clock item in the clock tree, such that + * subsequent code can create the remainder of the hierarchy (REF -> + * SYS -> CSB -> IPS) from the REF clock rate and the returned mul/div + * values + */ +static void mpc512x_clk_setup_ref_clock(struct device_node *np, int bus_freq, + int *sys_mul, int *sys_div, + int *ips_div) +{ + struct clk *osc_clk; + int calc_freq; + + /* fetch mul/div factors from the hardware */ + *sys_mul = get_spmf_mult(); + *sys_mul *= 2; /* compensate for the fractional divider */ + *sys_div = get_sys_div_x2(); + *ips_div = get_bit_field(&clkregs->scfr1, 23, 3); + + /* lookup the oscillator clock for its rate */ + osc_clk = of_clk_get_by_name(np, "osc"); + + /* + * either descend from OSC to REF (and in bypassing verify the + * IPS rate), or backtrack from IPS and multiplier values that + * were fetched from hardware to REF and thus to the OSC value + * + * in either case the REF clock gets created here and the + * remainder of the clock tree can get spanned from there + */ + if (!IS_ERR(osc_clk)) { + clks[MPC512x_CLK_REF] = mpc512x_clk_factor("ref", "osc", 1, 1); + calc_freq = clk_get_rate(clks[MPC512x_CLK_REF]); + calc_freq *= *sys_mul; + calc_freq /= *sys_div; + calc_freq /= 2; + calc_freq /= *ips_div; + if (bus_freq && calc_freq != bus_freq) + pr_warn("calc rate %d != OF spec %d\n", + calc_freq, bus_freq); + } else { + calc_freq = bus_freq; /* start with IPS */ + calc_freq *= *ips_div; /* IPS -> CSB */ + calc_freq *= 2; /* CSB -> SYS */ + calc_freq *= *sys_div; /* SYS -> PLL out */ + calc_freq /= *sys_mul; /* PLL out -> REF == OSC */ + clks[MPC512x_CLK_REF] = mpc512x_clk_fixed("ref", calc_freq); + } +} + +/* MCLK helpers {{{ */ + +/* + * helper code for the MCLK subtree setup + * + * the overview in section 5.2.4 of the MPC5121e Reference Manual rev4 + * suggests that all instances of the "PSC clock generation" are equal, + * and that one might re-use the PSC setup for MSCAN clock generation + * (section 5.2.5) as well, at least the logic if not the data for + * description + * + * the details (starting at page 5-20) show differences in the specific + * inputs of the first mux stage ("can clk in", "spdif tx"), and the + * factual non-availability of the second mux stage (it's present yet + * only one input is valid) + * + * the MSCAN clock related registers (starting at page 5-35) all + * reference "spdif clk" at the first mux stage and don't mention any + * "can clk" at all, which somehow is unexpected + * + * TODO re-check the document, and clarify whether the RM is correct in + * the overview or in the details, and whether the difference is a + * clipboard induced error or results from chip revisions + * + * it turns out that the RM rev4 as of 2012-06 talks about "can" for the + * PSCs while RM rev3 as of 2008-10 talks about "spdif", so I guess that + * first a doc update is required which better reflects reality in the + * SoC before the implementation should follow while no questions remain + */ + +/* + * note that this declaration raises a checkpatch warning, but + * it's the very data type dictated by <linux/clk-provider.h>, + * "fixing" this warning will break compilation + */ +static const char *parent_names_mux0_spdif[] = { + "sys", "ref", "psc-mclk-in", "spdif-tx", +}; + +static const char *parent_names_mux0_canin[] = { + "sys", "ref", "psc-mclk-in", "can-clk-in", +}; + +enum mclk_type { + MCLK_TYPE_PSC, + MCLK_TYPE_MSCAN, + MCLK_TYPE_SPDIF, + MCLK_TYPE_OUTCLK, +}; + +struct mclk_setup_data { + enum mclk_type type; + bool has_mclk1; + const char *name_mux0; + const char *name_en0; + const char *name_div0; + const char *parent_names_mux1[2]; + const char *name_mclk; +}; + +#define MCLK_SETUP_DATA_PSC(id) { \ + MCLK_TYPE_PSC, 0, \ + "psc" #id "-mux0", \ + "psc" #id "-en0", \ + "psc" #id "_mclk_div", \ + { "psc" #id "_mclk_div", "dummy", }, \ + "psc" #id "_mclk", \ +} + +#define MCLK_SETUP_DATA_MSCAN(id) { \ + MCLK_TYPE_MSCAN, 0, \ + "mscan" #id "-mux0", \ + "mscan" #id "-en0", \ + "mscan" #id "_mclk_div", \ + { "mscan" #id "_mclk_div", "dummy", }, \ + "mscan" #id "_mclk", \ +} + +#define MCLK_SETUP_DATA_SPDIF { \ + MCLK_TYPE_SPDIF, 1, \ + "spdif-mux0", \ + "spdif-en0", \ + "spdif_mclk_div", \ + { "spdif_mclk_div", "spdif-rx", }, \ + "spdif_mclk", \ +} + +#define MCLK_SETUP_DATA_OUTCLK(id) { \ + MCLK_TYPE_OUTCLK, 0, \ + "out" #id "-mux0", \ + "out" #id "-en0", \ + "out" #id "_mclk_div", \ + { "out" #id "_mclk_div", "dummy", }, \ + "out" #id "_clk", \ +} + +static struct mclk_setup_data mclk_psc_data[] = { + MCLK_SETUP_DATA_PSC(0), + MCLK_SETUP_DATA_PSC(1), + MCLK_SETUP_DATA_PSC(2), + MCLK_SETUP_DATA_PSC(3), + MCLK_SETUP_DATA_PSC(4), + MCLK_SETUP_DATA_PSC(5), + MCLK_SETUP_DATA_PSC(6), + MCLK_SETUP_DATA_PSC(7), + MCLK_SETUP_DATA_PSC(8), + MCLK_SETUP_DATA_PSC(9), + MCLK_SETUP_DATA_PSC(10), + MCLK_SETUP_DATA_PSC(11), +}; + +static struct mclk_setup_data mclk_mscan_data[] = { + MCLK_SETUP_DATA_MSCAN(0), + MCLK_SETUP_DATA_MSCAN(1), + MCLK_SETUP_DATA_MSCAN(2), + MCLK_SETUP_DATA_MSCAN(3), +}; + +static struct mclk_setup_data mclk_spdif_data[] = { + MCLK_SETUP_DATA_SPDIF, +}; + +static struct mclk_setup_data mclk_outclk_data[] = { + MCLK_SETUP_DATA_OUTCLK(0), + MCLK_SETUP_DATA_OUTCLK(1), + MCLK_SETUP_DATA_OUTCLK(2), + MCLK_SETUP_DATA_OUTCLK(3), +}; + +/* setup the MCLK clock subtree of an individual PSC/MSCAN/SPDIF */ +static void mpc512x_clk_setup_mclk(struct mclk_setup_data *entry, size_t idx) +{ + size_t clks_idx_pub, clks_idx_int; + u32 __iomem *mccr_reg; /* MCLK control register (mux, en, div) */ + int div; + + /* derive a few parameters from the component type and index */ + switch (entry->type) { + case MCLK_TYPE_PSC: + clks_idx_pub = MPC512x_CLK_PSC0_MCLK + idx; + clks_idx_int = MPC512x_CLK_MCLKS_FIRST + + (idx) * MCLK_MAX_IDX; + mccr_reg = &clkregs->psc_ccr[idx]; + break; + case MCLK_TYPE_MSCAN: + clks_idx_pub = MPC512x_CLK_MSCAN0_MCLK + idx; + clks_idx_int = MPC512x_CLK_MCLKS_FIRST + + (NR_PSCS + idx) * MCLK_MAX_IDX; + mccr_reg = &clkregs->mscan_ccr[idx]; + break; + case MCLK_TYPE_SPDIF: + clks_idx_pub = MPC512x_CLK_SPDIF_MCLK; + clks_idx_int = MPC512x_CLK_MCLKS_FIRST + + (NR_PSCS + NR_MSCANS) * MCLK_MAX_IDX; + mccr_reg = &clkregs->spccr; + break; + case MCLK_TYPE_OUTCLK: + clks_idx_pub = MPC512x_CLK_OUT0_CLK + idx; + clks_idx_int = MPC512x_CLK_MCLKS_FIRST + + (NR_PSCS + NR_MSCANS + NR_SPDIFS + idx) + * MCLK_MAX_IDX; + mccr_reg = &clkregs->out_ccr[idx]; + break; + default: + return; + } + + /* + * this was grabbed from the PPC_CLOCK implementation, which + * enforced a specific MCLK divider while the clock was gated + * during setup (that's a documented hardware requirement) + * + * the PPC_CLOCK implementation might even have violated the + * "MCLK <= IPS" constraint, the fixed divider value of 1 + * results in a divider of 2 and thus MCLK = SYS/2 which equals + * CSB which is greater than IPS; the serial port setup may have + * adjusted the divider which the clock setup might have left in + * an undesirable state + * + * initial setup is: + * - MCLK 0 from SYS + * - MCLK DIV such to not exceed the IPS clock + * - MCLK 0 enabled + * - MCLK 1 from MCLK DIV + */ + div = clk_get_rate(clks[MPC512x_CLK_SYS]); + div /= clk_get_rate(clks[MPC512x_CLK_IPS]); + out_be32(mccr_reg, (0 << 16)); + out_be32(mccr_reg, (0 << 16) | ((div - 1) << 17)); + out_be32(mccr_reg, (1 << 16) | ((div - 1) << 17)); + + /* + * create the 'struct clk' items of the MCLK's clock subtree + * + * note that by design we always create all nodes and won't take + * shortcuts here, because + * - the "internal" MCLK_DIV and MCLK_OUT signal in turn are + * selectable inputs to the CFM while those who "actually use" + * the PSC/MSCAN/SPDIF (serial drivers et al) need the MCLK + * for their bitrate + * - in the absence of "aliases" for clocks we need to create + * individial 'struct clk' items for whatever might get + * referenced or looked up, even if several of those items are + * identical from the logical POV (their rate value) + * - for easier future maintenance and for better reflection of + * the SoC's documentation, it appears appropriate to generate + * clock items even for those muxers which actually are NOPs + * (those with two inputs of which one is reserved) + */ + clks[clks_idx_int + MCLK_IDX_MUX0] = mpc512x_clk_muxed( + entry->name_mux0, + soc_has_mclk_mux0_canin() + ? &parent_names_mux0_canin[0] + : &parent_names_mux0_spdif[0], + ARRAY_SIZE(parent_names_mux0_spdif), + mccr_reg, 14, 2); + clks[clks_idx_int + MCLK_IDX_EN0] = mpc512x_clk_gated( + entry->name_en0, entry->name_mux0, + mccr_reg, 16); + clks[clks_idx_int + MCLK_IDX_DIV0] = mpc512x_clk_divider( + entry->name_div0, + entry->name_en0, CLK_SET_RATE_GATE, + mccr_reg, 17, 15, 0); + if (entry->has_mclk1) { + clks[clks_idx_pub] = mpc512x_clk_muxed( + entry->name_mclk, + &entry->parent_names_mux1[0], + ARRAY_SIZE(entry->parent_names_mux1), + mccr_reg, 7, 1); + } else { + clks[clks_idx_pub] = mpc512x_clk_factor( + entry->name_mclk, + entry->parent_names_mux1[0], + 1, 1); + } +} + +/* }}} MCLK helpers */ + +static void mpc512x_clk_setup_clock_tree(struct device_node *np, int busfreq) +{ + int sys_mul, sys_div, ips_div; + int mul, div; + size_t mclk_idx; + int freq; + + /* + * developer's notes: + * - consider whether to handle clocks which have both gates and + * dividers via intermediates or by means of composites + * - fractional dividers appear to not map well to composites + * since they can be seen as a fixed multiplier and an + * adjustable divider, while composites can only combine at + * most one of a mux, div, and gate each into one 'struct clk' + * item + * - PSC/MSCAN/SPDIF clock generation OTOH already is very + * specific and cannot get mapped to componsites (at least not + * a single one, maybe two of them, but then some of these + * intermediate clock signals get referenced elsewhere (e.g. + * in the clock frequency measurement, CFM) and thus need + * publicly available names + * - the current source layout appropriately reflects the + * hardware setup, and it works, so it's questionable whether + * further changes will result in big enough a benefit + */ + + /* regardless of whether XTAL/OSC exists, have REF created */ + mpc512x_clk_setup_ref_clock(np, busfreq, &sys_mul, &sys_div, &ips_div); + + /* now setup the REF -> SYS -> CSB -> IPS hierarchy */ + clks[MPC512x_CLK_SYS] = mpc512x_clk_factor("sys", "ref", + sys_mul, sys_div); + clks[MPC512x_CLK_CSB] = mpc512x_clk_factor("csb", "sys", 1, 2); + clks[MPC512x_CLK_IPS] = mpc512x_clk_divtable("ips", "csb", + &clkregs->scfr1, 23, 3, + divtab_2346); + /* now setup anything below SYS and CSB and IPS */ + + clks[MPC512x_CLK_DDR_UG] = mpc512x_clk_factor("ddr-ug", "sys", 1, 2); + + /* + * the Reference Manual discusses that for SDHC only even divide + * ratios are supported because clock domain synchronization + * between 'per' and 'ipg' is broken; + * keep the divider's bit 0 cleared (per reset value), and only + * allow to setup the divider's bits 7:1, which results in that + * only even divide ratios can get configured upon rate changes; + * keep the "x4" name because this bit shift hack is an internal + * implementation detail, the "fractional divider with quarters" + * semantics remains + */ + clks[MPC512x_CLK_SDHC_x4] = mpc512x_clk_factor("sdhc-x4", "csb", 2, 1); + clks[MPC512x_CLK_SDHC_UG] = mpc512x_clk_divider("sdhc-ug", "sdhc-x4", 0, + &clkregs->scfr2, 1, 7, + CLK_DIVIDER_ONE_BASED); + if (soc_has_sdhc2()) { + clks[MPC512x_CLK_SDHC2_UG] = mpc512x_clk_divider( + "sdhc2-ug", "sdhc-x4", 0, &clkregs->scfr2, + 9, 7, CLK_DIVIDER_ONE_BASED); + } + + clks[MPC512x_CLK_DIU_x4] = mpc512x_clk_factor("diu-x4", "csb", 4, 1); + clks[MPC512x_CLK_DIU_UG] = mpc512x_clk_divider("diu-ug", "diu-x4", 0, + &clkregs->scfr1, 0, 8, + CLK_DIVIDER_ONE_BASED); + + /* + * the "power architecture PLL" was setup from data which was + * sampled from the reset config word, at this point in time the + * configuration can be considered fixed and read only (i.e. no + * longer adjustable, or no longer in need of adjustment), which + * is why we don't register a PLL here but assume fixed factors + */ + mul = get_cpmf_mult_x2(); + div = 2; /* compensate for the fractional factor */ + clks[MPC512x_CLK_E300] = mpc512x_clk_factor("e300", "csb", mul, div); + + if (soc_has_mbx()) { + clks[MPC512x_CLK_MBX_BUS_UG] = mpc512x_clk_factor( + "mbx-bus-ug", "csb", 1, 2); + clks[MPC512x_CLK_MBX_UG] = mpc512x_clk_divtable( + "mbx-ug", "mbx-bus-ug", &clkregs->scfr1, + 14, 3, divtab_1234); + clks[MPC512x_CLK_MBX_3D_UG] = mpc512x_clk_factor( + "mbx-3d-ug", "mbx-ug", 1, 1); + } + if (soc_has_pci()) { + clks[MPC512x_CLK_PCI_UG] = mpc512x_clk_divtable( + "pci-ug", "csb", &clkregs->scfr1, + 20, 3, divtab_2346); + } + if (soc_has_nfc_5125()) { + /* + * XXX TODO implement 5125 NFC clock setup logic, + * with high/low period counters in clkregs->scfr3, + * currently there are no users so it's ENOIMPL + */ + clks[MPC512x_CLK_NFC_UG] = ERR_PTR(-ENOTSUPP); + } else { + clks[MPC512x_CLK_NFC_UG] = mpc512x_clk_divtable( + "nfc-ug", "ips", &clkregs->scfr1, + 8, 3, divtab_1234); + } + clks[MPC512x_CLK_LPC_UG] = mpc512x_clk_divtable("lpc-ug", "ips", + &clkregs->scfr1, 11, 3, + divtab_1234); + + clks[MPC512x_CLK_LPC] = mpc512x_clk_gated("lpc", "lpc-ug", + &clkregs->sccr1, 30); + clks[MPC512x_CLK_NFC] = mpc512x_clk_gated("nfc", "nfc-ug", + &clkregs->sccr1, 29); + if (soc_has_pata()) { + clks[MPC512x_CLK_PATA] = mpc512x_clk_gated( + "pata", "ips", &clkregs->sccr1, 28); + } + /* for PSCs there is a "registers" gate and a bitrate MCLK subtree */ + for (mclk_idx = 0; mclk_idx < soc_max_pscnum(); mclk_idx++) { + char name[12]; + snprintf(name, sizeof(name), "psc%d", mclk_idx); + clks[MPC512x_CLK_PSC0 + mclk_idx] = mpc512x_clk_gated( + name, "ips", &clkregs->sccr1, 27 - mclk_idx); + mpc512x_clk_setup_mclk(&mclk_psc_data[mclk_idx], mclk_idx); + } + clks[MPC512x_CLK_PSC_FIFO] = mpc512x_clk_gated("psc-fifo", "ips", + &clkregs->sccr1, 15); + if (soc_has_sata()) { + clks[MPC512x_CLK_SATA] = mpc512x_clk_gated( + "sata", "ips", &clkregs->sccr1, 14); + } + clks[MPC512x_CLK_FEC] = mpc512x_clk_gated("fec", "ips", + &clkregs->sccr1, 13); + if (soc_has_pci()) { + clks[MPC512x_CLK_PCI] = mpc512x_clk_gated( + "pci", "pci-ug", &clkregs->sccr1, 11); + } + clks[MPC512x_CLK_DDR] = mpc512x_clk_gated("ddr", "ddr-ug", + &clkregs->sccr1, 10); + if (soc_has_fec2()) { + clks[MPC512x_CLK_FEC2] = mpc512x_clk_gated( + "fec2", "ips", &clkregs->sccr1, 9); + } + + clks[MPC512x_CLK_DIU] = mpc512x_clk_gated("diu", "diu-ug", + &clkregs->sccr2, 31); + if (soc_has_axe()) { + clks[MPC512x_CLK_AXE] = mpc512x_clk_gated( + "axe", "csb", &clkregs->sccr2, 30); + } + clks[MPC512x_CLK_MEM] = mpc512x_clk_gated("mem", "ips", + &clkregs->sccr2, 29); + clks[MPC512x_CLK_USB1] = mpc512x_clk_gated("usb1", "csb", + &clkregs->sccr2, 28); + clks[MPC512x_CLK_USB2] = mpc512x_clk_gated("usb2", "csb", + &clkregs->sccr2, 27); + clks[MPC512x_CLK_I2C] = mpc512x_clk_gated("i2c", "ips", + &clkregs->sccr2, 26); + /* MSCAN differs from PSC with just one gate for multiple components */ + clks[MPC512x_CLK_BDLC] = mpc512x_clk_gated("bdlc", "ips", + &clkregs->sccr2, 25); + for (mclk_idx = 0; mclk_idx < ARRAY_SIZE(mclk_mscan_data); mclk_idx++) + mpc512x_clk_setup_mclk(&mclk_mscan_data[mclk_idx], mclk_idx); + clks[MPC512x_CLK_SDHC] = mpc512x_clk_gated("sdhc", "sdhc-ug", + &clkregs->sccr2, 24); + /* there is only one SPDIF component, which shares MCLK support code */ + if (soc_has_spdif()) { + clks[MPC512x_CLK_SPDIF] = mpc512x_clk_gated( + "spdif", "ips", &clkregs->sccr2, 23); + mpc512x_clk_setup_mclk(&mclk_spdif_data[0], 0); + } + if (soc_has_mbx()) { + clks[MPC512x_CLK_MBX_BUS] = mpc512x_clk_gated( + "mbx-bus", "mbx-bus-ug", &clkregs->sccr2, 22); + clks[MPC512x_CLK_MBX] = mpc512x_clk_gated( + "mbx", "mbx-ug", &clkregs->sccr2, 21); + clks[MPC512x_CLK_MBX_3D] = mpc512x_clk_gated( + "mbx-3d", "mbx-3d-ug", &clkregs->sccr2, 20); + } + clks[MPC512x_CLK_IIM] = mpc512x_clk_gated("iim", "csb", + &clkregs->sccr2, 19); + if (soc_has_viu()) { + clks[MPC512x_CLK_VIU] = mpc512x_clk_gated( + "viu", "csb", &clkregs->sccr2, 18); + } + if (soc_has_sdhc2()) { + clks[MPC512x_CLK_SDHC2] = mpc512x_clk_gated( + "sdhc-2", "sdhc2-ug", &clkregs->sccr2, 17); + } + + if (soc_has_outclk()) { + size_t idx; /* used as mclk_idx, just to trim line length */ + for (idx = 0; idx < ARRAY_SIZE(mclk_outclk_data); idx++) + mpc512x_clk_setup_mclk(&mclk_outclk_data[idx], idx); + } + + /* + * externally provided clocks (when implemented in hardware, + * device tree may specify values which otherwise were unknown) + */ + freq = get_freq_from_dt("psc_mclk_in"); + if (!freq) + freq = 25000000; + clks[MPC512x_CLK_PSC_MCLK_IN] = mpc512x_clk_fixed("psc_mclk_in", freq); + if (soc_has_mclk_mux0_canin()) { + freq = get_freq_from_dt("can_clk_in"); + clks[MPC512x_CLK_CAN_CLK_IN] = mpc512x_clk_fixed( + "can_clk_in", freq); + } else { + freq = get_freq_from_dt("spdif_tx_in"); + clks[MPC512x_CLK_SPDIF_TX_IN] = mpc512x_clk_fixed( + "spdif_tx_in", freq); + freq = get_freq_from_dt("spdif_rx_in"); + clks[MPC512x_CLK_SPDIF_TX_IN] = mpc512x_clk_fixed( + "spdif_rx_in", freq); + } + + /* fixed frequency for AC97, always 24.567MHz */ + clks[MPC512x_CLK_AC97] = mpc512x_clk_fixed("ac97", 24567000); + + /* + * pre-enable those "internal" clock items which never get + * claimed by any peripheral driver, to not have the clock + * subsystem disable them late at startup + */ + clk_prepare_enable(clks[MPC512x_CLK_DUMMY]); + clk_prepare_enable(clks[MPC512x_CLK_E300]); /* PowerPC CPU */ + clk_prepare_enable(clks[MPC512x_CLK_DDR]); /* DRAM */ + clk_prepare_enable(clks[MPC512x_CLK_MEM]); /* SRAM */ + clk_prepare_enable(clks[MPC512x_CLK_IPS]); /* SoC periph */ + clk_prepare_enable(clks[MPC512x_CLK_LPC]); /* boot media */ +} + +/* + * registers the set of public clocks (those listed in the dt-bindings/ + * header file) for OF lookups, keeps the intermediates private to us + */ +static void mpc5121_clk_register_of_provider(struct device_node *np) +{ + clk_data.clks = clks; + clk_data.clk_num = MPC512x_CLK_LAST_PUBLIC + 1; /* _not_ ARRAY_SIZE() */ + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +/* + * temporary support for the period of time between introduction of CCF + * support and the adjustment of peripheral drivers to OF based lookups + */ +static void mpc5121_clk_provide_migration_support(void) +{ + + /* + * pre-enable those clock items which are not yet appropriately + * acquired by their peripheral driver + * + * the PCI clock cannot get acquired by its peripheral driver, + * because for this platform the driver won't probe(), instead + * initialization is done from within the .setup_arch() routine + * at a point in time where the clock provider has not been + * setup yet and thus isn't available yet + * + * so we "pre-enable" the clock here, to not have the clock + * subsystem automatically disable this item in a late init call + * + * this PCI clock pre-enable workaround only applies when there + * are device tree nodes for PCI and thus the peripheral driver + * has attached to bridges, otherwise the PCI clock remains + * unused and so it gets disabled + */ + clk_prepare_enable(clks[MPC512x_CLK_PSC3_MCLK]);/* serial console */ + if (of_find_compatible_node(NULL, "pci", "fsl,mpc5121-pci")) + clk_prepare_enable(clks[MPC512x_CLK_PCI]); +} + +/* + * those macros are not exactly pretty, but they encapsulate a lot + * of copy'n'paste heavy code which is even more ugly, and reduce + * the potential for inconsistencies in those many code copies + */ +#define FOR_NODES(compatname) \ + for_each_compatible_node(np, NULL, compatname) + +#define NODE_PREP do { \ + of_address_to_resource(np, 0, &res); \ + snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \ +} while (0) + +#define NODE_CHK(clkname, clkitem, regnode, regflag) do { \ + struct clk *clk; \ + clk = of_clk_get_by_name(np, clkname); \ + if (IS_ERR(clk)) { \ + clk = clkitem; \ + clk_register_clkdev(clk, clkname, devname); \ + if (regnode) \ + clk_register_clkdev(clk, clkname, np->name); \ + did_register |= DID_REG_ ## regflag; \ + pr_debug("clock alias name '%s' for dev '%s' pointer %p\n", \ + clkname, devname, clk); \ + } else { \ + clk_put(clk); \ + } \ +} while (0) + +/* + * register source code provided fallback results for clock lookups, + * these get consulted when OF based clock lookup fails (that is in the + * case of not yet adjusted device tree data, where clock related specs + * are missing) + */ +static void mpc5121_clk_provide_backwards_compat(void) +{ + enum did_reg_flags { + DID_REG_PSC = BIT(0), + DID_REG_PSCFIFO = BIT(1), + DID_REG_NFC = BIT(2), + DID_REG_CAN = BIT(3), + DID_REG_I2C = BIT(4), + DID_REG_DIU = BIT(5), + DID_REG_VIU = BIT(6), + DID_REG_FEC = BIT(7), + DID_REG_USB = BIT(8), + DID_REG_PATA = BIT(9), + }; + + int did_register; + struct device_node *np; + struct resource res; + int idx; + char devname[32]; + + did_register = 0; + + FOR_NODES(mpc512x_select_psc_compat()) { + NODE_PREP; + idx = (res.start >> 8) & 0xf; + NODE_CHK("ipg", clks[MPC512x_CLK_PSC0 + idx], 0, PSC); + NODE_CHK("mclk", clks[MPC512x_CLK_PSC0_MCLK + idx], 0, PSC); + } + + FOR_NODES("fsl,mpc5121-psc-fifo") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_PSC_FIFO], 1, PSCFIFO); + } + + FOR_NODES("fsl,mpc5121-nfc") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_NFC], 0, NFC); + } + + FOR_NODES("fsl,mpc5121-mscan") { + NODE_PREP; + idx = 0; + idx += (res.start & 0x2000) ? 2 : 0; + idx += (res.start & 0x0080) ? 1 : 0; + NODE_CHK("ipg", clks[MPC512x_CLK_BDLC], 0, CAN); + NODE_CHK("mclk", clks[MPC512x_CLK_MSCAN0_MCLK + idx], 0, CAN); + } + + /* + * do register the 'ips', 'sys', and 'ref' names globally + * instead of inside each individual CAN node, as there is no + * potential for a name conflict (in contrast to 'ipg' and 'mclk') + */ + if (did_register & DID_REG_CAN) { + clk_register_clkdev(clks[MPC512x_CLK_IPS], "ips", NULL); + clk_register_clkdev(clks[MPC512x_CLK_SYS], "sys", NULL); + clk_register_clkdev(clks[MPC512x_CLK_REF], "ref", NULL); + } + + FOR_NODES("fsl,mpc5121-i2c") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_I2C], 0, I2C); + } + + /* + * workaround for the fact that the I2C driver does an "anonymous" + * lookup (NULL name spec, which yields the first clock spec) for + * which we cannot register an alias -- a _global_ 'ipg' alias that + * is not bound to any device name and returns the I2C clock item + * is not a good idea + * + * so we have the lookup in the peripheral driver fail, which is + * silent and non-fatal, and pre-enable the clock item here such + * that register access is possible + * + * see commit b3bfce2b "i2c: mpc: cleanup clock API use" for + * details, adjusting s/NULL/"ipg"/ in i2c-mpc.c would make this + * workaround obsolete + */ + if (did_register & DID_REG_I2C) + clk_prepare_enable(clks[MPC512x_CLK_I2C]); + + FOR_NODES("fsl,mpc5121-diu") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_DIU], 1, DIU); + } + + FOR_NODES("fsl,mpc5121-viu") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_VIU], 0, VIU); + } + + /* + * note that 2771399a "fs_enet: cleanup clock API use" did use the + * "per" string for the clock lookup in contrast to the "ipg" name + * which most other nodes are using -- this is not a fatal thing + * but just something to keep in mind when doing compatibility + * registration, it's a non-issue with up-to-date device tree data + */ + FOR_NODES("fsl,mpc5121-fec") { + NODE_PREP; + NODE_CHK("per", clks[MPC512x_CLK_FEC], 0, FEC); + } + FOR_NODES("fsl,mpc5121-fec-mdio") { + NODE_PREP; + NODE_CHK("per", clks[MPC512x_CLK_FEC], 0, FEC); + } + /* + * MPC5125 has two FECs: FEC1 at 0x2800, FEC2 at 0x4800; + * the clock items don't "form an array" since FEC2 was + * added only later and was not allowed to shift all other + * clock item indices, so the numbers aren't adjacent + */ + FOR_NODES("fsl,mpc5125-fec") { + NODE_PREP; + if (res.start & 0x4000) + idx = MPC512x_CLK_FEC2; + else + idx = MPC512x_CLK_FEC; + NODE_CHK("per", clks[idx], 0, FEC); + } + + FOR_NODES("fsl,mpc5121-usb2-dr") { + NODE_PREP; + idx = (res.start & 0x4000) ? 1 : 0; + NODE_CHK("ipg", clks[MPC512x_CLK_USB1 + idx], 0, USB); + } + + FOR_NODES("fsl,mpc5121-pata") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_PATA], 0, PATA); + } + + /* + * try to collapse diagnostics into a single line of output yet + * provide a full list of what is missing, to avoid noise in the + * absence of up-to-date device tree data -- backwards + * compatibility to old DTBs is a requirement, updates may be + * desirable or preferrable but are not at all mandatory + */ + if (did_register) { + pr_notice("device tree lacks clock specs, adding fallbacks (0x%x,%s%s%s%s%s%s%s%s%s%s)\n", + did_register, + (did_register & DID_REG_PSC) ? " PSC" : "", + (did_register & DID_REG_PSCFIFO) ? " PSCFIFO" : "", + (did_register & DID_REG_NFC) ? " NFC" : "", + (did_register & DID_REG_CAN) ? " CAN" : "", + (did_register & DID_REG_I2C) ? " I2C" : "", + (did_register & DID_REG_DIU) ? " DIU" : "", + (did_register & DID_REG_VIU) ? " VIU" : "", + (did_register & DID_REG_FEC) ? " FEC" : "", + (did_register & DID_REG_USB) ? " USB" : "", + (did_register & DID_REG_PATA) ? " PATA" : ""); + } else { + pr_debug("device tree has clock specs, no fallbacks added\n"); + } +} + +int __init mpc5121_clk_init(void) +{ + struct device_node *clk_np; + int busfreq; + + /* map the clock control registers */ + clk_np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); + if (!clk_np) + return -ENODEV; + clkregs = of_iomap(clk_np, 0); + WARN_ON(!clkregs); + + /* determine the SoC variant we run on */ + mpc512x_clk_determine_soc(); + + /* invalidate all not yet registered clock slots */ + mpc512x_clk_preset_data(); + + /* + * have the device tree scanned for "fixed-clock" nodes (which + * includes the oscillator node if the board's DT provides one) + */ + of_clk_init(NULL); + + /* + * add a dummy clock for those situations where a clock spec is + * required yet no real clock is involved + */ + clks[MPC512x_CLK_DUMMY] = mpc512x_clk_fixed("dummy", 0); + + /* + * have all the real nodes in the clock tree populated from REF + * down to all leaves, either starting from the OSC node or from + * a REF root that was created from the IPS bus clock input + */ + busfreq = get_freq_from_dt("bus-frequency"); + mpc512x_clk_setup_clock_tree(clk_np, busfreq); + + /* register as an OF clock provider */ + mpc5121_clk_register_of_provider(clk_np); + + /* + * unbreak not yet adjusted peripheral drivers during migration + * towards fully operational common clock support, and allow + * operation in the absence of clock related device tree specs + */ + mpc5121_clk_provide_migration_support(); + mpc5121_clk_provide_backwards_compat(); + + return 0; +} diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c deleted file mode 100644 index fd8a3765341..00000000000 --- a/arch/powerpc/platforms/512x/clock.c +++ /dev/null @@ -1,754 +0,0 @@ -/* - * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved. - * - * Author: John Rigby <jrigby@freescale.com> - * - * Implements the clk api defined in include/linux/clk.h - * - * Original based on linux/arch/arm/mach-integrator/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/io.h> - -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <asm/mpc5xxx.h> -#include <asm/mpc5121.h> -#include <asm/clk_interface.h> - -#include "mpc512x.h" - -#undef CLK_DEBUG - -static int clocks_initialized; - -#define CLK_HAS_RATE 0x1 /* has rate in MHz */ -#define CLK_HAS_CTRL 0x2 /* has control reg and bit */ - -struct clk { - struct list_head node; - char name[32]; - int flags; - struct device *dev; - unsigned long rate; - struct module *owner; - void (*calc) (struct clk *); - struct clk *parent; - int reg, bit; /* CLK_HAS_CTRL */ - int div_shift; /* only used by generic_div_clk_calc */ -}; - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -static struct clk *mpc5121_clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - int dev_match; - int id_match; - - if (dev == NULL || id == NULL) - return clk; - - mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { - dev_match = id_match = 0; - - if (dev == p->dev) - dev_match++; - if (strcmp(id, p->name) == 0) - id_match++; - if ((dev_match || id_match) && try_module_get(p->owner)) { - clk = p; - break; - } - } - mutex_unlock(&clocks_mutex); - - return clk; -} - -#ifdef CLK_DEBUG -static void dump_clocks(void) -{ - struct clk *p; - - mutex_lock(&clocks_mutex); - printk(KERN_INFO "CLOCKS:\n"); - list_for_each_entry(p, &clocks, node) { - pr_info(" %s=%ld", p->name, p->rate); - if (p->parent) - pr_cont(" %s=%ld", p->parent->name, - p->parent->rate); - if (p->flags & CLK_HAS_CTRL) - pr_cont(" reg/bit=%d/%d", p->reg, p->bit); - pr_cont("\n"); - } - mutex_unlock(&clocks_mutex); -} -#define DEBUG_CLK_DUMP() dump_clocks() -#else -#define DEBUG_CLK_DUMP() -#endif - - -static void mpc5121_clk_put(struct clk *clk) -{ - module_put(clk->owner); -} - -#define NRPSC 12 - -struct mpc512x_clockctl { - u32 spmr; /* System PLL Mode Reg */ - u32 sccr[2]; /* System Clk Ctrl Reg 1 & 2 */ - u32 scfr1; /* System Clk Freq Reg 1 */ - u32 scfr2; /* System Clk Freq Reg 2 */ - u32 reserved; - u32 bcr; /* Bread Crumb Reg */ - u32 pccr[NRPSC]; /* PSC Clk Ctrl Reg 0-11 */ - u32 spccr; /* SPDIF Clk Ctrl Reg */ - u32 cccr; /* CFM Clk Ctrl Reg */ - u32 dccr; /* DIU Clk Cnfg Reg */ -}; - -static struct mpc512x_clockctl __iomem *clockctl; - -static int mpc5121_clk_enable(struct clk *clk) -{ - unsigned int mask; - - if (clk->flags & CLK_HAS_CTRL) { - mask = in_be32(&clockctl->sccr[clk->reg]); - mask |= 1 << clk->bit; - out_be32(&clockctl->sccr[clk->reg], mask); - } - return 0; -} - -static void mpc5121_clk_disable(struct clk *clk) -{ - unsigned int mask; - - if (clk->flags & CLK_HAS_CTRL) { - mask = in_be32(&clockctl->sccr[clk->reg]); - mask &= ~(1 << clk->bit); - out_be32(&clockctl->sccr[clk->reg], mask); - } -} - -static unsigned long mpc5121_clk_get_rate(struct clk *clk) -{ - if (clk->flags & CLK_HAS_RATE) - return clk->rate; - else - return 0; -} - -static long mpc5121_clk_round_rate(struct clk *clk, unsigned long rate) -{ - return rate; -} - -static int mpc5121_clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} - -static int clk_register(struct clk *clk) -{ - mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); - mutex_unlock(&clocks_mutex); - return 0; -} - -static unsigned long spmf_mult(void) -{ - /* - * Convert spmf to multiplier - */ - static int spmf_to_mult[] = { - 68, 1, 12, 16, - 20, 24, 28, 32, - 36, 40, 44, 48, - 52, 56, 60, 64 - }; - int spmf = (in_be32(&clockctl->spmr) >> 24) & 0xf; - return spmf_to_mult[spmf]; -} - -static unsigned long sysdiv_div_x_2(void) -{ - /* - * Convert sysdiv to divisor x 2 - * Some divisors have fractional parts so - * multiply by 2 then divide by this value - */ - static int sysdiv_to_div_x_2[] = { - 4, 5, 6, 7, - 8, 9, 10, 14, - 12, 16, 18, 22, - 20, 24, 26, 30, - 28, 32, 34, 38, - 36, 40, 42, 46, - 44, 48, 50, 54, - 52, 56, 58, 62, - 60, 64, 66, - }; - int sysdiv = (in_be32(&clockctl->scfr2) >> 26) & 0x3f; - return sysdiv_to_div_x_2[sysdiv]; -} - -static unsigned long ref_to_sys(unsigned long rate) -{ - rate *= spmf_mult(); - rate *= 2; - rate /= sysdiv_div_x_2(); - - return rate; -} - -static unsigned long sys_to_ref(unsigned long rate) -{ - rate *= sysdiv_div_x_2(); - rate /= 2; - rate /= spmf_mult(); - - return rate; -} - -static long ips_to_ref(unsigned long rate) -{ - int ips_div = (in_be32(&clockctl->scfr1) >> 23) & 0x7; - - rate *= ips_div; /* csb_clk = ips_clk * ips_div */ - rate *= 2; /* sys_clk = csb_clk * 2 */ - return sys_to_ref(rate); -} - -static unsigned long devtree_getfreq(char *clockname) -{ - struct device_node *np; - const unsigned int *prop; - unsigned int val = 0; - - np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr"); - if (np) { - prop = of_get_property(np, clockname, NULL); - if (prop) - val = *prop; - of_node_put(np); - } - return val; -} - -static void ref_clk_calc(struct clk *clk) -{ - unsigned long rate; - - rate = devtree_getfreq("bus-frequency"); - if (rate == 0) { - printk(KERN_ERR "No bus-frequency in dev tree\n"); - clk->rate = 0; - return; - } - clk->rate = ips_to_ref(rate); -} - -static struct clk ref_clk = { - .name = "ref_clk", - .calc = ref_clk_calc, -}; - - -static void sys_clk_calc(struct clk *clk) -{ - clk->rate = ref_to_sys(ref_clk.rate); -} - -static struct clk sys_clk = { - .name = "sys_clk", - .calc = sys_clk_calc, -}; - -static void diu_clk_calc(struct clk *clk) -{ - int diudiv_x_2 = in_be32(&clockctl->scfr1) & 0xff; - unsigned long rate; - - rate = sys_clk.rate; - - rate *= 2; - rate /= diudiv_x_2; - - clk->rate = rate; -} - -static void viu_clk_calc(struct clk *clk) -{ - unsigned long rate; - - rate = sys_clk.rate; - rate /= 2; - clk->rate = rate; -} - -static void half_clk_calc(struct clk *clk) -{ - clk->rate = clk->parent->rate / 2; -} - -static void generic_div_clk_calc(struct clk *clk) -{ - int div = (in_be32(&clockctl->scfr1) >> clk->div_shift) & 0x7; - - clk->rate = clk->parent->rate / div; -} - -static void unity_clk_calc(struct clk *clk) -{ - clk->rate = clk->parent->rate; -} - -static struct clk csb_clk = { - .name = "csb_clk", - .calc = half_clk_calc, - .parent = &sys_clk, -}; - -static void e300_clk_calc(struct clk *clk) -{ - int spmf = (in_be32(&clockctl->spmr) >> 16) & 0xf; - int ratex2 = clk->parent->rate * spmf; - - clk->rate = ratex2 / 2; -} - -static struct clk e300_clk = { - .name = "e300_clk", - .calc = e300_clk_calc, - .parent = &csb_clk, -}; - -static struct clk ips_clk = { - .name = "ips_clk", - .calc = generic_div_clk_calc, - .parent = &csb_clk, - .div_shift = 23, -}; - -/* - * Clocks controlled by SCCR1 (.reg = 0) - */ -static struct clk lpc_clk = { - .name = "lpc_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 30, - .calc = generic_div_clk_calc, - .parent = &ips_clk, - .div_shift = 11, -}; - -static struct clk nfc_clk = { - .name = "nfc_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 29, - .calc = generic_div_clk_calc, - .parent = &ips_clk, - .div_shift = 8, -}; - -static struct clk pata_clk = { - .name = "pata_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 28, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -/* - * PSC clocks (bits 27 - 16) - * are setup elsewhere - */ - -static struct clk sata_clk = { - .name = "sata_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 14, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk fec_clk = { - .name = "fec_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 13, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk pci_clk = { - .name = "pci_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 11, - .calc = generic_div_clk_calc, - .parent = &csb_clk, - .div_shift = 20, -}; - -/* - * Clocks controlled by SCCR2 (.reg = 1) - */ -static struct clk diu_clk = { - .name = "diu_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 31, - .calc = diu_clk_calc, -}; - -static struct clk viu_clk = { - .name = "viu_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 18, - .calc = viu_clk_calc, -}; - -static struct clk axe_clk = { - .name = "axe_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 30, - .calc = unity_clk_calc, - .parent = &csb_clk, -}; - -static struct clk usb1_clk = { - .name = "usb1_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 28, - .calc = unity_clk_calc, - .parent = &csb_clk, -}; - -static struct clk usb2_clk = { - .name = "usb2_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 27, - .calc = unity_clk_calc, - .parent = &csb_clk, -}; - -static struct clk i2c_clk = { - .name = "i2c_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 26, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk mscan_clk = { - .name = "mscan_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 25, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk sdhc_clk = { - .name = "sdhc_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 24, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk mbx_bus_clk = { - .name = "mbx_bus_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 22, - .calc = half_clk_calc, - .parent = &csb_clk, -}; - -static struct clk mbx_clk = { - .name = "mbx_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 21, - .calc = unity_clk_calc, - .parent = &csb_clk, -}; - -static struct clk mbx_3d_clk = { - .name = "mbx_3d_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 20, - .calc = generic_div_clk_calc, - .parent = &mbx_bus_clk, - .div_shift = 14, -}; - -static void psc_mclk_in_calc(struct clk *clk) -{ - clk->rate = devtree_getfreq("psc_mclk_in"); - if (!clk->rate) - clk->rate = 25000000; -} - -static struct clk psc_mclk_in = { - .name = "psc_mclk_in", - .calc = psc_mclk_in_calc, -}; - -static struct clk spdif_txclk = { - .name = "spdif_txclk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 23, -}; - -static struct clk spdif_rxclk = { - .name = "spdif_rxclk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 23, -}; - -static void ac97_clk_calc(struct clk *clk) -{ - /* ac97 bit clock is always 24.567 MHz */ - clk->rate = 24567000; -} - -static struct clk ac97_clk = { - .name = "ac97_clk_in", - .calc = ac97_clk_calc, -}; - -static struct clk *rate_clks[] = { - &ref_clk, - &sys_clk, - &diu_clk, - &viu_clk, - &csb_clk, - &e300_clk, - &ips_clk, - &fec_clk, - &sata_clk, - &pata_clk, - &nfc_clk, - &lpc_clk, - &mbx_bus_clk, - &mbx_clk, - &mbx_3d_clk, - &axe_clk, - &usb1_clk, - &usb2_clk, - &i2c_clk, - &mscan_clk, - &sdhc_clk, - &pci_clk, - &psc_mclk_in, - &spdif_txclk, - &spdif_rxclk, - &ac97_clk, - NULL -}; - -static void rate_clk_init(struct clk *clk) -{ - if (clk->calc) { - clk->calc(clk); - clk->flags |= CLK_HAS_RATE; - clk_register(clk); - } else { - printk(KERN_WARNING - "Could not initialize clk %s without a calc routine\n", - clk->name); - } -} - -static void rate_clks_init(void) -{ - struct clk **cpp, *clk; - - cpp = rate_clks; - while ((clk = *cpp++)) - rate_clk_init(clk); -} - -/* - * There are two clk enable registers with 32 enable bits each - * psc clocks and device clocks are all stored in dev_clks - */ -static struct clk dev_clks[2][32]; - -/* - * Given a psc number return the dev_clk - * associated with it - */ -static struct clk *psc_dev_clk(int pscnum) -{ - int reg, bit; - struct clk *clk; - - reg = 0; - bit = 27 - pscnum; - - clk = &dev_clks[reg][bit]; - clk->reg = 0; - clk->bit = bit; - return clk; -} - -/* - * PSC clock rate calculation - */ -static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np) -{ - unsigned long mclk_src = sys_clk.rate; - unsigned long mclk_div; - - /* - * Can only change value of mclk divider - * when the divider is disabled. - * - * Zero is not a valid divider so minimum - * divider is 1 - * - * disable/set divider/enable - */ - out_be32(&clockctl->pccr[pscnum], 0); - out_be32(&clockctl->pccr[pscnum], 0x00020000); - out_be32(&clockctl->pccr[pscnum], 0x00030000); - - if (in_be32(&clockctl->pccr[pscnum]) & 0x80) { - clk->rate = spdif_rxclk.rate; - return; - } - - switch ((in_be32(&clockctl->pccr[pscnum]) >> 14) & 0x3) { - case 0: - mclk_src = sys_clk.rate; - break; - case 1: - mclk_src = ref_clk.rate; - break; - case 2: - mclk_src = psc_mclk_in.rate; - break; - case 3: - mclk_src = spdif_txclk.rate; - break; - } - - mclk_div = ((in_be32(&clockctl->pccr[pscnum]) >> 17) & 0x7fff) + 1; - clk->rate = mclk_src / mclk_div; -} - -/* - * Find all psc nodes in device tree and assign a clock - * with name "psc%d_mclk" and dev pointing at the device - * returned from of_find_device_by_node - */ -static void psc_clks_init(void) -{ - struct device_node *np; - struct platform_device *ofdev; - u32 reg; - const char *psc_compat; - - psc_compat = mpc512x_select_psc_compat(); - if (!psc_compat) - return; - - for_each_compatible_node(np, NULL, psc_compat) { - if (!of_property_read_u32(np, "reg", ®)) { - int pscnum = (reg & 0xf00) >> 8; - struct clk *clk = psc_dev_clk(pscnum); - - clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL; - ofdev = of_find_device_by_node(np); - clk->dev = &ofdev->dev; - /* - * AC97 is special rate clock does - * not go through normal path - */ - if (of_device_is_compatible(np, "fsl,mpc5121-psc-ac97")) - clk->rate = ac97_clk.rate; - else - psc_calc_rate(clk, pscnum, np); - sprintf(clk->name, "psc%d_mclk", pscnum); - clk_register(clk); - clk_enable(clk); - } - } -} - -static struct clk_interface mpc5121_clk_functions = { - .clk_get = mpc5121_clk_get, - .clk_enable = mpc5121_clk_enable, - .clk_disable = mpc5121_clk_disable, - .clk_get_rate = mpc5121_clk_get_rate, - .clk_put = mpc5121_clk_put, - .clk_round_rate = mpc5121_clk_round_rate, - .clk_set_rate = mpc5121_clk_set_rate, - .clk_set_parent = NULL, - .clk_get_parent = NULL, -}; - -int __init mpc5121_clk_init(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); - if (np) { - clockctl = of_iomap(np, 0); - of_node_put(np); - } - - if (!clockctl) { - printk(KERN_ERR "Could not map clock control registers\n"); - return 0; - } - - rate_clks_init(); - psc_clks_init(); - - /* leave clockctl mapped forever */ - /*iounmap(clockctl); */ - DEBUG_CLK_DUMP(); - clocks_initialized++; - clk_functions = mpc5121_clk_functions; - return 0; -} diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index 36b5652aada..adb95f03d4d 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -12,6 +12,7 @@ * (at your option) any later version. */ +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/io.h> #include <linux/irq.h> @@ -68,98 +69,112 @@ struct fsl_diu_shared_fb { bool in_use; }; -#define DIU_DIV_MASK 0x000000ff +/* receives a pixel clock spec in pico seconds, adjusts the DIU clock rate */ static void mpc512x_set_pixel_clock(unsigned int pixclock) { - unsigned long bestval, bestfreq, speed, busfreq; - unsigned long minpixclock, maxpixclock, pixval; - struct mpc512x_ccm __iomem *ccm; struct device_node *np; - u32 temp; - long err; - int i; + struct clk *clk_diu; + unsigned long epsilon, minpixclock, maxpixclock; + unsigned long offset, want, got, delta; - np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); + /* lookup and enable the DIU clock */ + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu"); if (!np) { - pr_err("Can't find clock control module.\n"); + pr_err("Could not find DIU device tree node.\n"); return; } - - ccm = of_iomap(np, 0); + clk_diu = of_clk_get(np, 0); + if (IS_ERR(clk_diu)) { + /* backwards compat with device trees that lack clock specs */ + clk_diu = clk_get_sys(np->name, "ipg"); + } of_node_put(np); - if (!ccm) { - pr_err("Can't map clock control module reg.\n"); + if (IS_ERR(clk_diu)) { + pr_err("Could not lookup DIU clock.\n"); return; } - - np = of_find_node_by_type(NULL, "cpu"); - if (np) { - const unsigned int *prop = - of_get_property(np, "bus-frequency", NULL); - - of_node_put(np); - if (prop) { - busfreq = *prop; - } else { - pr_err("Can't get bus-frequency property\n"); - return; - } - } else { - pr_err("Can't find 'cpu' node.\n"); + if (clk_prepare_enable(clk_diu)) { + pr_err("Could not enable DIU clock.\n"); return; } - /* Pixel Clock configuration */ - pr_debug("DIU: Bus Frequency = %lu\n", busfreq); - speed = busfreq * 4; /* DIU_DIV ratio is 4 * CSB_CLK / DIU_CLK */ - - /* Calculate the pixel clock with the smallest error */ - /* calculate the following in steps to avoid overflow */ - pr_debug("DIU pixclock in ps - %d\n", pixclock); - temp = (1000000000 / pixclock) * 1000; - pixclock = temp; - pr_debug("DIU pixclock freq - %u\n", pixclock); - - temp = temp / 20; /* pixclock * 0.05 */ - pr_debug("deviation = %d\n", temp); - minpixclock = pixclock - temp; - maxpixclock = pixclock + temp; - pr_debug("DIU minpixclock - %lu\n", minpixclock); - pr_debug("DIU maxpixclock - %lu\n", maxpixclock); - pixval = speed/pixclock; - pr_debug("DIU pixval = %lu\n", pixval); - - err = LONG_MAX; - bestval = pixval; - pr_debug("DIU bestval = %lu\n", bestval); - - bestfreq = 0; - for (i = -1; i <= 1; i++) { - temp = speed / (pixval+i); - pr_debug("DIU test pixval i=%d, pixval=%lu, temp freq. = %u\n", - i, pixval, temp); - if ((temp < minpixclock) || (temp > maxpixclock)) - pr_debug("DIU exceeds monitor range (%lu to %lu)\n", - minpixclock, maxpixclock); - else if (abs(temp - pixclock) < err) { - pr_debug("Entered the else if block %d\n", i); - err = abs(temp - pixclock); - bestval = pixval + i; - bestfreq = temp; - } + /* + * convert the picoseconds spec into the desired clock rate, + * determine the acceptable clock range for the monitor (+/- 5%), + * do the calculation in steps to avoid integer overflow + */ + pr_debug("DIU pixclock in ps - %u\n", pixclock); + pixclock = (1000000000 / pixclock) * 1000; + pr_debug("DIU pixclock freq - %u\n", pixclock); + epsilon = pixclock / 20; /* pixclock * 0.05 */ + pr_debug("DIU deviation - %lu\n", epsilon); + minpixclock = pixclock - epsilon; + maxpixclock = pixclock + epsilon; + pr_debug("DIU minpixclock - %lu\n", minpixclock); + pr_debug("DIU maxpixclock - %lu\n", maxpixclock); + + /* + * check whether the DIU supports the desired pixel clock + * + * - simply request the desired clock and see what the + * platform's clock driver will make of it, assuming that it + * will setup the best approximation of the requested value + * - try other candidate frequencies in the order of decreasing + * preference (i.e. with increasing distance from the desired + * pixel clock, and checking the lower frequency before the + * higher frequency to not overload the hardware) until the + * first match is found -- any potential subsequent match + * would only be as good as the former match or typically + * would be less preferrable + * + * the offset increment of pixelclock divided by 64 is an + * arbitrary choice -- it's simple to calculate, in the typical + * case we expect the first check to succeed already, in the + * worst case seven frequencies get tested (the exact center and + * three more values each to the left and to the right) before + * the 5% tolerance window is exceeded, resulting in fast enough + * execution yet high enough probability of finding a suitable + * value, while the error rate will be in the order of single + * percents + */ + for (offset = 0; offset <= epsilon; offset += pixclock / 64) { + want = pixclock - offset; + pr_debug("DIU checking clock - %lu\n", want); + clk_set_rate(clk_diu, want); + got = clk_get_rate(clk_diu); + delta = abs(pixclock - got); + if (delta < epsilon) + break; + if (!offset) + continue; + want = pixclock + offset; + pr_debug("DIU checking clock - %lu\n", want); + clk_set_rate(clk_diu, want); + got = clk_get_rate(clk_diu); + delta = abs(pixclock - got); + if (delta < epsilon) + break; } + if (offset <= epsilon) { + pr_debug("DIU clock accepted - %lu\n", want); + pr_debug("DIU pixclock want %u, got %lu, delta %lu, eps %lu\n", + pixclock, got, delta, epsilon); + return; + } + pr_warn("DIU pixclock auto search unsuccessful\n"); - pr_debug("DIU chose = %lx\n", bestval); - pr_debug("DIU error = %ld\n NomPixClk ", err); - pr_debug("DIU: Best Freq = %lx\n", bestfreq); - /* Modify DIU_DIV in CCM SCFR1 */ - temp = in_be32(&ccm->scfr1); - pr_debug("DIU: Current value of SCFR1: 0x%08x\n", temp); - temp &= ~DIU_DIV_MASK; - temp |= (bestval & DIU_DIV_MASK); - out_be32(&ccm->scfr1, temp); - pr_debug("DIU: Modified value of SCFR1: 0x%08x\n", temp); - iounmap(ccm); + /* + * what is the most appropriate action to take when the search + * for an available pixel clock which is acceptable to the + * monitor has failed? disable the DIU (clock) or just provide + * a "best effort"? we go with the latter + */ + pr_warn("DIU pixclock best effort fallback (backend's choice)\n"); + clk_set_rate(clk_diu, pixclock); + got = clk_get_rate(clk_diu); + delta = abs(pixclock - got); + pr_debug("DIU pixclock want %u, got %lu, delta %lu, eps %lu\n", + pixclock, got, delta, epsilon); } static enum fsl_diu_monitor_port diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index af54174801f..b625a2c6f4f 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -1,7 +1,7 @@ config PPC_MPC52xx bool "52xx-based boards" depends on 6xx - select PPC_CLOCK + select COMMON_CLK select PPC_PCI_CHOICE config PPC_MPC5200_SIMPLE diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 670a033264c..2bdc8c862c4 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -99,7 +99,6 @@ config SBC834x config ASP834x bool "Analogue & Micro ASP 834x" select PPC_MPC834x - select REDBOOT help This enables support for the Analogue & Micro ASP 83xx board. diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c index fd71cfdf238..e238b6a55b1 100644 --- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c +++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c @@ -11,7 +11,6 @@ * (at your option) any later version. */ -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index 3d9716ccd32..4b4c081df94 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -10,7 +10,6 @@ * by the Free Software Foundation. */ -#include <linux/init.h> #include <linux/pm.h> #include <linux/types.h> #include <linux/ioport.h> diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 4d4634958cf..c17aae80e7f 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -123,6 +123,12 @@ config P1023_RDS help This option enables support for the P1023 RDS and RDB boards +config TWR_P102x + bool "Freescale TWR-P102x" + select DEFAULT_UIMAGE + help + This option enables support for the TWR-P1025 board. + config SOCRATES bool "Socrates" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index dd4c0b59577..25cebe74ac4 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1022_RDK) += p1022_rdk.o obj-$(CONFIG_P1023_RDS) += p1023_rds.o +obj-$(CONFIG_TWR_P102x) += twr_p102x.o obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c index eba78c85303..3b085c7ee53 100644 --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -9,6 +9,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/qe.h> #include <sysdev/cpm2_pic.h> #include "mpc85xx.h" @@ -82,3 +83,40 @@ void __init mpc85xx_cpm2_pic_init(void) irq_set_chained_handler(irq, cpm2_cascade); } #endif + +#ifdef CONFIG_QUICC_ENGINE +void __init mpc85xx_qe_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) { + np = of_find_node_by_name(NULL, "qe"); + if (!np) { + pr_err("%s: Could not find Quicc Engine node\n", + __func__); + return; + } + } + + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + + qe_reset(); + of_node_put(np); + + np = of_find_node_by_name(NULL, "par_io"); + if (np) { + struct device_node *ucc; + + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(ucc, "ucc") + par_io_of_config(ucc); + + } +} +#endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h index 2aa7c5dc2c7..fc51dd4092e 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx.h +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -8,4 +8,10 @@ extern void mpc85xx_cpm2_pic_init(void); static inline void __init mpc85xx_cpm2_pic_init(void) {} #endif /* CONFIG_CPM2 */ +#ifdef CONFIG_QUICC_ENGINE +extern void mpc85xx_qe_init(void); +#else +static inline void __init mpc85xx_qe_init(void) {} +#endif + #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index a7b3621a8df..34f3c5eb3be 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006-2010, 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc. * All rights reserved. * * Author: Andy Fleming <afleming@freescale.com> @@ -238,32 +238,7 @@ static void __init mpc85xx_mds_qe_init(void) { struct device_node *np; - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - np = of_find_node_by_name(NULL, "qe"); - if (!np) - return; - } - - if (!of_device_is_available(np)) { - of_node_put(np); - return; - } - - qe_reset(); - of_node_put(np); - - np = of_find_node_by_name(NULL, "par_io"); - if (np) { - struct device_node *ucc; - - par_io_init(np); - of_node_put(np); - - for_each_node_by_name(ucc, "ucc") - par_io_of_config(ucc); - } - + mpc85xx_qe_init(); mpc85xx_mds_reset_ucc_phys(); if (machine_is(p1021_mds)) { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index 53b6fb0a3d5..e15bdd18fdb 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -1,7 +1,7 @@ /* * MPC85xx RDB Board Setup * - * Copyright 2009,2012 Freescale Semiconductor Inc. + * Copyright 2009,2012-2013 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -98,26 +98,7 @@ static void __init mpc85xx_rdb_setup_arch(void) fsl_pci_assign_primary(); #ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - pr_err("%s: Could not find Quicc Engine node\n", __func__); - goto qe_fail; - } - - qe_reset(); - of_node_put(np); - - np = of_find_node_by_name(NULL, "par_io"); - if (np) { - struct device_node *ucc; - - par_io_init(np); - of_node_put(np); - - for_each_node_by_name(ucc, "ucc") - par_io_of_config(ucc); - - } + mpc85xx_qe_init(); #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) if (machine_is(p1025_rdb)) { @@ -148,8 +129,6 @@ static void __init mpc85xx_rdb_setup_arch(void) } #endif - -qe_fail: #endif /* CONFIG_QUICC_ENGINE */ printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c index b9197cea185..bb75add6708 100644 --- a/arch/powerpc/platforms/85xx/sgy_cts1000.c +++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c @@ -14,7 +14,6 @@ #include <linux/platform_device.h> #include <linux/device.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/workqueue.h> diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 393f975ab39..6382098d6f8 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -389,15 +389,18 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image) } #endif /* CONFIG_KEXEC */ -static void smp_85xx_setup_cpu(int cpu_nr) +static void smp_85xx_basic_setup(int cpu_nr) { - if (smp_85xx_ops.probe == smp_mpic_probe) - mpic_setup_this_cpu(); - if (cpu_has_feature(CPU_FTR_DBELL)) doorbell_setup_this_cpu(); } +static void smp_85xx_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); + smp_85xx_basic_setup(cpu_nr); +} + static const struct of_device_id mpc85xx_smp_guts_ids[] = { { .compatible = "fsl,mpc8572-guts", }, { .compatible = "fsl,p1020-guts", }, @@ -412,13 +415,14 @@ void __init mpc85xx_smp_init(void) { struct device_node *np; - smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; np = of_find_node_by_type(NULL, "open-pic"); if (np) { smp_85xx_ops.probe = smp_mpic_probe; + smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; smp_85xx_ops.message_pass = smp_mpic_message_pass; - } + } else + smp_85xx_ops.setup_cpu = smp_85xx_basic_setup; if (cpu_has_feature(CPU_FTR_DBELL)) { /* @@ -427,6 +431,7 @@ void __init mpc85xx_smp_init(void) */ smp_85xx_ops.message_pass = NULL; smp_85xx_ops.cause_ipi = doorbell_cause_ipi; + smp_85xx_ops.probe = NULL; } np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids); diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c new file mode 100644 index 00000000000..c25ff10f05e --- /dev/null +++ b/arch/powerpc/platforms/85xx/twr_p102x.c @@ -0,0 +1,147 @@ +/* + * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc. + * + * Author: Michael Johnston <michael.johnston@freescale.com> + * + * Description: + * TWR-P102x Board Setup + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/of_platform.h> + +#include <asm/pci-bridge.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> +#include <asm/fsl_guts.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" + +static void __init twr_p1025_pic_init(void) +{ + struct mpic *mpic; + +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (np) { + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + of_node_put(np); + } else + pr_err("Could not find qe-ic node\n"); +#endif +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init twr_p1025_setup_arch(void) +{ +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("twr_p1025_setup_arch()", 0); + + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); + +#ifdef CONFIG_QUICC_ENGINE + mpc85xx_qe_init(); + +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) + if (machine_is(twr_p1025)) { + struct ccsr_guts __iomem *guts; + + np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts"); + if (np) { + guts = of_iomap(np, 0); + if (!guts) + pr_err("twr_p1025: could not map global utilities register\n"); + else { + /* P1025 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management signals in PMUXCR + * register. + * Set QE mux bits in PMUXCR */ + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + +#if defined(CONFIG_SERIAL_QE) + /* On P1025TWR board, the UCC7 acted as UART port. + * However, The UCC7's CTS pin is low level in default, + * it will impact the transmission in full duplex + * communication. So disable the Flow control pin PA18. + * The UCC7 UART just can use RXD and TXD pins. + */ + par_io_config_pin(0, 18, 0, 0, 0, 0); +#endif + /* Drive PB29 to CPLD low - CPLD will then change + * muxing from LBC to QE */ + par_io_config_pin(1, 29, 1, 0, 0, 0); + par_io_data_set(1, 29, 0); + } + of_node_put(np); + } + } +#endif +#endif /* CONFIG_QUICC_ENGINE */ + + pr_info("TWR-P1025 board from Freescale Semiconductor\n"); +} + +machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices); + +static int __init twr_p1025_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,TWR-P1025"); +} + +define_machine(twr_p1025) { + .name = "TWR-P1025", + .probe = twr_p1025_probe, + .setup_arch = twr_p1025_setup_arch, + .init_IRQ = twr_p1025_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 8dec3c0911a..bd6f1a1cf92 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -45,7 +45,6 @@ config PPC_EP88XC config PPC_ADDER875 bool "Analogue & Micro Adder 875" select CPM1 - select REDBOOT help This enables support for the Analogue & Micro Adder 875 board. diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index bca2465a9c3..434fda39bf8 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -72,6 +72,7 @@ config PPC_BOOK3S_64 select PPC_HAVE_PMU_SUPPORT select SYS_SUPPORTS_HUGETLBFS select HAVE_ARCH_TRANSPARENT_HUGEPAGE if PPC_64K_PAGES + select ARCH_SUPPORTS_NUMA_BALANCING config PPC_BOOK3E_64 bool "Embedded processors" diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c index c34ee4e6087..d4d245c0d78 100644 --- a/arch/powerpc/platforms/cell/beat_htab.c +++ b/arch/powerpc/platforms/cell/beat_htab.c @@ -111,7 +111,7 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); if (rflags & _PAGE_NO_CACHE) - hpte_r &= ~_PAGE_COHERENT; + hpte_r &= ~HPTE_R_M; raw_spin_lock(&beat_htab_lock); lpar_rc = beat_read_mask(hpte_group); @@ -337,7 +337,7 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group, DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); if (rflags & _PAGE_NO_CACHE) - hpte_r &= ~_PAGE_COHERENT; + hpte_r &= ~HPTE_R_M; /* insert into not-volted entry */ lpar_rc = beat_insert_htab_entry3(0, hpte_group, hpte_v, hpte_r, diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index b53560660b7..2b90ff8a93b 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -197,7 +197,7 @@ static int tce_build_cell(struct iommu_table *tbl, long index, long npages, io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); - for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE) + for (i = 0; i < npages; i++, uaddr += tbl->it_page_shift) io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask); mb(); @@ -430,7 +430,7 @@ static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, { cell_iommu_setup_stab(iommu, base, size, 0, 0); iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, - IOMMU_PAGE_SHIFT); + IOMMU_PAGE_SHIFT_4K); cell_iommu_enable_hardware(iommu); } @@ -487,8 +487,10 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, window->table.it_blocksize = 16; window->table.it_base = (unsigned long)iommu->ptab; window->table.it_index = iommu->nid; - window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset; - window->table.it_size = size >> IOMMU_PAGE_SHIFT; + window->table.it_page_shift = IOMMU_PAGE_SHIFT_4K; + window->table.it_offset = + (offset >> window->table.it_page_shift) + pte_offset; + window->table.it_size = size >> window->table.it_page_shift; iommu_init_table(&window->table, iommu->nid); @@ -773,7 +775,7 @@ static void __init cell_iommu_init_one(struct device_node *np, /* Setup the iommu_table */ cell_iommu_setup_window(iommu, np, base, size, - offset >> IOMMU_PAGE_SHIFT); + offset >> IOMMU_PAGE_SHIFT_4K); } static void __init cell_disable_iommus(void) @@ -1122,7 +1124,7 @@ static int __init cell_iommu_fixed_mapping_init(void) cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, - IOMMU_PAGE_SHIFT); + IOMMU_PAGE_SHIFT_4K); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 5ec1e47a0d7..e865d748179 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -123,7 +123,8 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) area->nid = nid; area->order = order; - area->pages = alloc_pages_exact_node(area->nid, GFP_KERNEL|GFP_THISNODE, + area->pages = alloc_pages_exact_node(area->nid, + GFP_KERNEL|__GFP_THISNODE, area->order); if (!area->pages) { diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index dead91b177b..b6c9a0dcc92 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -14,7 +14,6 @@ #include <linux/interrupt.h> #include <linux/kernel_stat.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/spinlock.h> #include <asm/ptrace.h> diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 302ba43d73a..6d3c7a9fd04 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -67,6 +67,18 @@ config PPC_C2K This option enables support for the GE Fanuc C2K board (formerly an SBS board). +config MVME5100 + bool "Motorola/Emerson MVME5100" + depends on EMBEDDED6xx + select MPIC + select PCI + select PPC_INDIRECT_PCI + select PPC_I8259 + select PPC_NATIVE + help + This option enables support for the Motorola (now Emerson) MVME5100 + board. + config TSI108_BRIDGE bool select PCI @@ -113,4 +125,3 @@ config WII help Select WII if configuring for the Nintendo Wii. More information at: <http://gc-linux.sourceforge.net/> - diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile index 66c23e423f4..cdd48d402b9 100644 --- a/arch/powerpc/platforms/embedded6xx/Makefile +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o obj-$(CONFIG_GAMECUBE) += gamecube.o obj-$(CONFIG_WII) += wii.o hlwd-pic.o +obj-$(CONFIG_MVME5100) += mvme5100.o diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c index 6c03034dbbd..c269caee58f 100644 --- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -15,7 +15,6 @@ #define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt #include <linux/kernel.h> -#include <linux/init.h> #include <linux/irq.h> #include <linux/of.h> #include <linux/of_address.h> diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c new file mode 100644 index 00000000000..25e3bfb64ef --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c @@ -0,0 +1,221 @@ +/* + * Board setup routines for the Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * Based on earlier code by: + * + * Matt Porter, MontaVista Software Inc. + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Author: Stephen Chivers <schivers@csc.com> + * + */ + +#include <linux/of_platform.h> + +#include <asm/i8259.h> +#include <asm/pci-bridge.h> +#include <asm/mpic.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#define HAWK_MPIC_SIZE 0x00040000U +#define MVME5100_PCI_MEM_OFFSET 0x00000000 + +/* Board register addresses. */ +#define BOARD_STATUS_REG 0xfef88080 +#define BOARD_MODFAIL_REG 0xfef88090 +#define BOARD_MODRST_REG 0xfef880a0 +#define BOARD_TBEN_REG 0xfef880c0 +#define BOARD_SW_READ_REG 0xfef880e0 +#define BOARD_GEO_ADDR_REG 0xfef880e8 +#define BOARD_EXT_FEATURE1_REG 0xfef880f0 +#define BOARD_EXT_FEATURE2_REG 0xfef88100 + +static phys_addr_t pci_membase; +static u_char *restart; + +static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +static void __init mvme5100_pic_init(void) +{ + struct mpic *mpic; + struct device_node *np; + struct device_node *cp = NULL; + unsigned int cirq; + unsigned long intack = 0; + const u32 *prop = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) { + pr_err("Could not find open-pic node\n"); + return; + } + + mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, pci_membase + 0x10000); + + mpic_init(mpic); + + cp = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (cp == NULL) { + pr_warn("mvme5100_pic_init: couldn't find i8259\n"); + return; + } + + cirq = irq_of_parse_and_map(cp, 0); + if (cirq == NO_IRQ) { + pr_warn("mvme5100_pic_init: no cascade interrupt?\n"); + return; + } + + np = of_find_compatible_node(NULL, "pci", "mpc10x-pci"); + if (np) { + prop = of_get_property(np, "8259-interrupt-acknowledge", NULL); + + if (prop) + intack = prop[0]; + + of_node_put(np); + } + + if (intack) + pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n", + intack); + + i8259_init(cp, intack); + of_node_put(cp); + irq_set_chained_handler(cirq, mvme5100_8259_cascade); +} + +static int __init mvme5100_add_bridge(struct device_node *dev) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + unsigned short devid; + + pr_info("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = of_get_property(dev, "bus-range", &len); + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0); + + pci_process_bridge_OF_ranges(hose, dev, 1); + + early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid); + + if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) { + pr_err("HAWK PHB not present?\n"); + return 0; + } + + early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase); + + if (pci_membase == 0) { + pr_err("HAWK PHB mibar not correctly set?\n"); + return 0; + } + + pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase); + + return 0; +} + +static struct of_device_id mvme5100_of_bus_ids[] __initdata = { + { .compatible = "hawk-bridge", }, + {}, +}; + +/* + * Setup the architecture + */ +static void __init mvme5100_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mvme5100_setup_arch()", 0); + + for_each_compatible_node(np, "pci", "hawk-pci") + mvme5100_add_bridge(np); + + restart = ioremap(BOARD_MODRST_REG, 4); +} + + +static void mvme5100_show_cpuinfo(struct seq_file *m) +{ + seq_puts(m, "Vendor\t\t: Motorola/Emerson\n"); + seq_puts(m, "Machine\t\t: MVME5100\n"); +} + +static void mvme5100_restart(char *cmd) +{ + + local_irq_disable(); + mtmsr(mfmsr() | MSR_IP); + + out_8((u_char *) restart, 0x01); + + while (1) + ; +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mvme5100_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MVME5100"); +} + +static int __init probe_of_platform_devices(void) +{ + + of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL); + return 0; +} + +machine_device_initcall(mvme5100, probe_of_platform_devices); + +define_machine(mvme5100) { + .name = "MVME5100", + .probe = mvme5100_probe, + .setup_arch = mvme5100_setup_arch, + .init_IRQ = mvme5100_pic_init, + .show_cpuinfo = mvme5100_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = mvme5100_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c index f3defd8a280..aafa01ba062 100644 --- a/arch/powerpc/platforms/pasemi/dma_lib.c +++ b/arch/powerpc/platforms/pasemi/dma_lib.c @@ -18,7 +18,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/export.h> #include <linux/pci.h> #include <linux/slab.h> diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 7d2d036754b..2e576f2ae44 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -138,8 +138,11 @@ static void iommu_table_iobmap_setup(void) pr_debug(" -> %s\n", __func__); iommu_table_iobmap.it_busno = 0; iommu_table_iobmap.it_offset = 0; + iommu_table_iobmap.it_page_shift = IOBMAP_PAGE_SHIFT; + /* it_size is in number of entries */ - iommu_table_iobmap.it_size = 0x80000000 >> IOBMAP_PAGE_SHIFT; + iommu_table_iobmap.it_size = + 0x80000000 >> iommu_table_iobmap.it_page_shift; /* Initialize the common IOMMU code */ iommu_table_iobmap.it_base = (unsigned long)iob_l2_base; diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index d588e48dff7..43075081721 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -5,7 +5,6 @@ * FIXME: LOCKING !!! */ -#include <linux/init.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/spinlock.h> diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig index 9fced3f6d2d..895e8a20a3f 100644 --- a/arch/powerpc/platforms/powernv/Kconfig +++ b/arch/powerpc/platforms/powernv/Kconfig @@ -13,11 +13,6 @@ config PPC_POWERNV select ARCH_RANDOM default y -config POWERNV_MSI - bool "Support PCI MSI on PowerNV platform" - depends on PCI_MSI - default y - config PPC_POWERNV_RTAS depends on PPC_POWERNV bool "Support for RTAS based PowerNV platforms such as BML" diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index 873fa1370dc..8d767fde5a6 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o obj-$(CONFIG_EEH) += eeh-ioda.o eeh-powernv.o obj-$(CONFIG_PPC_SCOM) += opal-xscom.o +obj-$(CONFIG_MEMORY_FAILURE) += opal-memory-errors.o diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index d7ddcee7feb..253fefe3d1a 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -14,7 +14,6 @@ #include <linux/bootmem.h> #include <linux/debugfs.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/kernel.h> @@ -45,7 +44,8 @@ static int ioda_eeh_event(struct notifier_block *nb, /* We simply send special EEH event */ if ((changed_evts & OPAL_EVENT_PCI_ERROR) && - (events & OPAL_EVENT_PCI_ERROR)) + (events & OPAL_EVENT_PCI_ERROR) && + eeh_enabled()) eeh_send_failure_event(NULL); return 0; @@ -114,6 +114,7 @@ DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get, ioda_eeh_inbB_dbgfs_set, "0x%llx\n"); #endif /* CONFIG_DEBUG_FS */ + /** * ioda_eeh_post_init - Chip dependent post initialization * @hose: PCI controller @@ -221,6 +222,22 @@ static int ioda_eeh_set_option(struct eeh_pe *pe, int option) return ret; } +static void ioda_eeh_phb_diag(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + long rc; + + rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob, + PNV_PCI_DIAG_BUF_SIZE); + if (rc != OPAL_SUCCESS) { + pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n", + __func__, hose->global_number, rc); + return; + } + + pnv_pci_dump_phb_diag_data(hose, phb->diag.blob); +} + /** * ioda_eeh_get_state - Retrieve the state of PE * @pe: EEH PE @@ -272,6 +289,9 @@ static int ioda_eeh_get_state(struct eeh_pe *pe) result |= EEH_STATE_DMA_ACTIVE; result |= EEH_STATE_MMIO_ENABLED; result |= EEH_STATE_DMA_ENABLED; + } else if (!(pe->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(hose); } return result; @@ -315,6 +335,15 @@ static int ioda_eeh_get_state(struct eeh_pe *pe) __func__, fstate, hose->global_number, pe_no); } + /* Dump PHB diag-data for frozen PE */ + if (result != EEH_STATE_NOT_SUPPORT && + (result & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) != + (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) && + !(pe->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(hose); + } + return result; } @@ -490,8 +519,7 @@ static int ioda_eeh_bridge_reset(struct pci_controller *hose, static int ioda_eeh_reset(struct eeh_pe *pe, int option) { struct pci_controller *hose = pe->phb; - struct eeh_dev *edev; - struct pci_dev *dev; + struct pci_bus *bus; int ret; /* @@ -520,76 +548,17 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option) if (pe->type & EEH_PE_PHB) { ret = ioda_eeh_phb_reset(hose, option); } else { - if (pe->type & EEH_PE_DEVICE) { - /* - * If it's device PE, we didn't refer to the parent - * PCI bus yet. So we have to figure it out indirectly. - */ - edev = list_first_entry(&pe->edevs, - struct eeh_dev, list); - dev = eeh_dev_to_pci_dev(edev); - dev = dev->bus->self; - } else { - /* - * If it's bus PE, the parent PCI bus is already there - * and just pick it up. - */ - dev = pe->bus->self; - } - - /* - * Do reset based on the fact that the direct upstream bridge - * is root bridge (port) or not. - */ - if (dev->bus->number == 0) + bus = eeh_pe_bus_get(pe); + if (pci_is_root_bus(bus)) ret = ioda_eeh_root_reset(hose, option); else - ret = ioda_eeh_bridge_reset(hose, dev, option); + ret = ioda_eeh_bridge_reset(hose, bus->self, option); } return ret; } /** - * ioda_eeh_get_log - Retrieve error log - * @pe: EEH PE - * @severity: Severity level of the log - * @drv_log: buffer to store the log - * @len: space of the log buffer - * - * The function is used to retrieve error log from P7IOC. - */ -static int ioda_eeh_get_log(struct eeh_pe *pe, int severity, - char *drv_log, unsigned long len) -{ - s64 ret; - unsigned long flags; - struct pci_controller *hose = pe->phb; - struct pnv_phb *phb = hose->private_data; - - spin_lock_irqsave(&phb->lock, flags); - - ret = opal_pci_get_phb_diag_data2(phb->opal_id, - phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE); - if (ret) { - spin_unlock_irqrestore(&phb->lock, flags); - pr_warning("%s: Can't get log for PHB#%x-PE#%x (%lld)\n", - __func__, hose->global_number, pe->addr, ret); - return -EIO; - } - - /* - * FIXME: We probably need log the error in somewhere. - * Lets make it up in future. - */ - /* pr_info("%s", phb->diag.blob); */ - - spin_unlock_irqrestore(&phb->lock, flags); - - return 0; -} - -/** * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE * @pe: EEH PE * @@ -670,167 +639,6 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose) } } -static void ioda_eeh_p7ioc_phb_diag(struct pci_controller *hose, - struct OpalIoPhbErrorCommon *common) -{ - struct OpalIoP7IOCPhbErrorData *data; - int i; - - data = (struct OpalIoP7IOCPhbErrorData *)common; - - pr_info("P7IOC PHB#%x Diag-data (Version: %d)\n\n", - hose->global_number, common->version); - - pr_info(" brdgCtl: %08x\n", data->brdgCtl); - - pr_info(" portStatusReg: %08x\n", data->portStatusReg); - pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus); - pr_info(" busAgentStatus: %08x\n", data->busAgentStatus); - - pr_info(" deviceStatus: %08x\n", data->deviceStatus); - pr_info(" slotStatus: %08x\n", data->slotStatus); - pr_info(" linkStatus: %08x\n", data->linkStatus); - pr_info(" devCmdStatus: %08x\n", data->devCmdStatus); - pr_info(" devSecStatus: %08x\n", data->devSecStatus); - - pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus); - pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus); - pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus); - pr_info(" tlpHdr1: %08x\n", data->tlpHdr1); - pr_info(" tlpHdr2: %08x\n", data->tlpHdr2); - pr_info(" tlpHdr3: %08x\n", data->tlpHdr3); - pr_info(" tlpHdr4: %08x\n", data->tlpHdr4); - pr_info(" sourceId: %08x\n", data->sourceId); - - pr_info(" errorClass: %016llx\n", data->errorClass); - pr_info(" correlator: %016llx\n", data->correlator); - pr_info(" p7iocPlssr: %016llx\n", data->p7iocPlssr); - pr_info(" p7iocCsr: %016llx\n", data->p7iocCsr); - pr_info(" lemFir: %016llx\n", data->lemFir); - pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask); - pr_info(" lemWOF: %016llx\n", data->lemWOF); - pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus); - pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus); - pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0); - pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1); - pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus); - pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus); - pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0); - pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1); - pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus); - pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus); - pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0); - pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1); - pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus); - pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus); - pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0); - pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1); - - for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { - if ((data->pestA[i] >> 63) == 0 && - (data->pestB[i] >> 63) == 0) - continue; - - pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]); - pr_info(" PESTB: %016llx\n", data->pestB[i]); - } -} - -static void ioda_eeh_phb3_phb_diag(struct pci_controller *hose, - struct OpalIoPhbErrorCommon *common) -{ - struct OpalIoPhb3ErrorData *data; - int i; - - data = (struct OpalIoPhb3ErrorData*)common; - pr_info("PHB3 PHB#%x Diag-data (Version: %d)\n\n", - hose->global_number, common->version); - - pr_info(" brdgCtl: %08x\n", data->brdgCtl); - - pr_info(" portStatusReg: %08x\n", data->portStatusReg); - pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus); - pr_info(" busAgentStatus: %08x\n", data->busAgentStatus); - - pr_info(" deviceStatus: %08x\n", data->deviceStatus); - pr_info(" slotStatus: %08x\n", data->slotStatus); - pr_info(" linkStatus: %08x\n", data->linkStatus); - pr_info(" devCmdStatus: %08x\n", data->devCmdStatus); - pr_info(" devSecStatus: %08x\n", data->devSecStatus); - - pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus); - pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus); - pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus); - pr_info(" tlpHdr1: %08x\n", data->tlpHdr1); - pr_info(" tlpHdr2: %08x\n", data->tlpHdr2); - pr_info(" tlpHdr3: %08x\n", data->tlpHdr3); - pr_info(" tlpHdr4: %08x\n", data->tlpHdr4); - pr_info(" sourceId: %08x\n", data->sourceId); - pr_info(" errorClass: %016llx\n", data->errorClass); - pr_info(" correlator: %016llx\n", data->correlator); - pr_info(" nFir: %016llx\n", data->nFir); - pr_info(" nFirMask: %016llx\n", data->nFirMask); - pr_info(" nFirWOF: %016llx\n", data->nFirWOF); - pr_info(" PhbPlssr: %016llx\n", data->phbPlssr); - pr_info(" PhbCsr: %016llx\n", data->phbCsr); - pr_info(" lemFir: %016llx\n", data->lemFir); - pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask); - pr_info(" lemWOF: %016llx\n", data->lemWOF); - pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus); - pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus); - pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0); - pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1); - pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus); - pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus); - pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0); - pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1); - pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus); - pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus); - pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0); - pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1); - pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus); - pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus); - pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0); - pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1); - - for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) { - if ((data->pestA[i] >> 63) == 0 && - (data->pestB[i] >> 63) == 0) - continue; - - pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]); - pr_info(" PESTB: %016llx\n", data->pestB[i]); - } -} - -static void ioda_eeh_phb_diag(struct pci_controller *hose) -{ - struct pnv_phb *phb = hose->private_data; - struct OpalIoPhbErrorCommon *common; - long rc; - - rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob, - PNV_PCI_DIAG_BUF_SIZE); - if (rc != OPAL_SUCCESS) { - pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n", - __func__, hose->global_number, rc); - return; - } - - common = (struct OpalIoPhbErrorCommon *)phb->diag.blob; - switch (common->ioType) { - case OPAL_PHB_ERROR_DATA_TYPE_P7IOC: - ioda_eeh_p7ioc_phb_diag(hose, common); - break; - case OPAL_PHB_ERROR_DATA_TYPE_PHB3: - ioda_eeh_phb3_phb_diag(hose, common); - break; - default: - pr_warning("%s: Unrecognized I/O chip %d\n", - __func__, common->ioType); - } -} - static int ioda_eeh_get_phb_pe(struct pci_controller *hose, struct eeh_pe **pe) { @@ -862,11 +670,7 @@ static int ioda_eeh_get_pe(struct pci_controller *hose, dev.phb = hose; dev.pe_config_addr = pe_no; dev_pe = eeh_pe_get(&dev); - if (!dev_pe) { - pr_warning("%s: Can't find PE for PHB#%x - PE#%x\n", - __func__, hose->global_number, pe_no); - return -EEXIST; - } + if (!dev_pe) return -EEXIST; *pe = dev_pe; return 0; @@ -884,12 +688,12 @@ static int ioda_eeh_get_pe(struct pci_controller *hose, */ static int ioda_eeh_next_error(struct eeh_pe **pe) { - struct pci_controller *hose, *tmp; + struct pci_controller *hose; struct pnv_phb *phb; u64 frozen_pe_no; u16 err_type, severity; long rc; - int ret = 1; + int ret = EEH_NEXT_ERR_NONE; /* * While running here, it's safe to purge the event queue. @@ -899,7 +703,7 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) eeh_remove_event(NULL); opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul); - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + list_for_each_entry(hose, &hose_list, list_node) { /* * If the subordinate PCI buses of the PHB has been * removed, we needn't take care of it any more. @@ -938,19 +742,19 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) switch (err_type) { case OPAL_EEH_IOC_ERROR: if (severity == OPAL_EEH_SEV_IOC_DEAD) { - list_for_each_entry_safe(hose, tmp, - &hose_list, list_node) { + list_for_each_entry(hose, &hose_list, + list_node) { phb = hose->private_data; phb->eeh_state |= PNV_EEH_STATE_REMOVED; } pr_err("EEH: dead IOC detected\n"); - ret = 4; - goto out; + ret = EEH_NEXT_ERR_DEAD_IOC; } else if (severity == OPAL_EEH_SEV_INF) { pr_info("EEH: IOC informative error " "detected\n"); ioda_eeh_hub_diag(hose); + ret = EEH_NEXT_ERR_NONE; } break; @@ -962,37 +766,75 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) pr_err("EEH: dead PHB#%x detected\n", hose->global_number); phb->eeh_state |= PNV_EEH_STATE_REMOVED; - ret = 3; - goto out; + ret = EEH_NEXT_ERR_DEAD_PHB; } else if (severity == OPAL_EEH_SEV_PHB_FENCED) { if (ioda_eeh_get_phb_pe(hose, pe)) break; pr_err("EEH: fenced PHB#%x detected\n", hose->global_number); - ret = 2; - goto out; + ret = EEH_NEXT_ERR_FENCED_PHB; } else if (severity == OPAL_EEH_SEV_INF) { pr_info("EEH: PHB#%x informative error " "detected\n", hose->global_number); ioda_eeh_phb_diag(hose); + ret = EEH_NEXT_ERR_NONE; } break; case OPAL_EEH_PE_ERROR: - if (ioda_eeh_get_pe(hose, frozen_pe_no, pe)) - break; + /* + * If we can't find the corresponding PE, the + * PEEV / PEST would be messy. So we force an + * fenced PHB so that it can be recovered. + */ + if (ioda_eeh_get_pe(hose, frozen_pe_no, pe)) { + if (!ioda_eeh_get_phb_pe(hose, pe)) { + pr_err("EEH: Escalated fenced PHB#%x " + "detected for PE#%llx\n", + hose->global_number, + frozen_pe_no); + ret = EEH_NEXT_ERR_FENCED_PHB; + } else { + ret = EEH_NEXT_ERR_NONE; + } + } else { + pr_err("EEH: Frozen PE#%x on PHB#%x detected\n", + (*pe)->addr, (*pe)->phb->global_number); + ret = EEH_NEXT_ERR_FROZEN_PE; + } + + break; + default: + pr_warn("%s: Unexpected error type %d\n", + __func__, err_type); + } - pr_err("EEH: Frozen PE#%x on PHB#%x detected\n", - (*pe)->addr, (*pe)->phb->global_number); - ret = 1; - goto out; + /* + * EEH core will try recover from fenced PHB or + * frozen PE. In the time for frozen PE, EEH core + * enable IO path for that before collecting logs, + * but it ruins the site. So we have to dump the + * log in advance here. + */ + if ((ret == EEH_NEXT_ERR_FROZEN_PE || + ret == EEH_NEXT_ERR_FENCED_PHB) && + !((*pe)->state & EEH_PE_ISOLATED)) { + eeh_pe_state_mark(*pe, EEH_PE_ISOLATED); + ioda_eeh_phb_diag(hose); } + + /* + * If we have no errors on the specific PHB or only + * informative error there, we continue poking it. + * Otherwise, we need actions to be taken by upper + * layer. + */ + if (ret > EEH_NEXT_ERR_INF) + break; } - ret = 0; -out: return ret; } @@ -1001,7 +843,6 @@ struct pnv_eeh_ops ioda_eeh_ops = { .set_option = ioda_eeh_set_option, .get_state = ioda_eeh_get_state, .reset = ioda_eeh_reset, - .get_log = ioda_eeh_get_log, .configure_bridge = ioda_eeh_configure_bridge, .next_error = ioda_eeh_next_error }; diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 73b981438cc..a59788e83b8 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -145,7 +145,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) * Enable EEH explicitly so that we will do EEH check * while accessing I/O stuff */ - eeh_subsystem_enabled = 1; + eeh_set_enable(true); /* Save memory bars */ eeh_save_bars(edev); @@ -344,6 +344,27 @@ static int powernv_eeh_next_error(struct eeh_pe **pe) return -EEXIST; } +static int powernv_eeh_restore_config(struct device_node *dn) +{ + struct eeh_dev *edev = of_node_to_eeh_dev(dn); + struct pnv_phb *phb; + s64 ret; + + if (!edev) + return -EEXIST; + + phb = edev->phb->private_data; + ret = opal_pci_reinit(phb->opal_id, + OPAL_REINIT_PCI_DEV, edev->config_addr); + if (ret) { + pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n", + __func__, edev->config_addr, ret); + return -EIO; + } + + return 0; +} + static struct eeh_ops powernv_eeh_ops = { .name = "powernv", .init = powernv_eeh_init, @@ -359,7 +380,8 @@ static struct eeh_ops powernv_eeh_ops = { .configure_bridge = powernv_eeh_configure_bridge, .read_config = pnv_pci_cfg_read, .write_config = pnv_pci_cfg_write, - .next_error = powernv_eeh_next_error + .next_error = powernv_eeh_next_error, + .restore_config = powernv_eeh_restore_config }; /** diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c index d8773079ce1..714ef972406 100644 --- a/arch/powerpc/platforms/powernv/opal-flash.c +++ b/arch/powerpc/platforms/powernv/opal-flash.c @@ -76,8 +76,8 @@ /* Validate buffer size */ #define VALIDATE_BUF_SIZE 4096 -/* XXX: Assume candidate image size is <= 256MB */ -#define MAX_IMAGE_SIZE 0x10000000 +/* XXX: Assume candidate image size is <= 1GB */ +#define MAX_IMAGE_SIZE 0x40000000 /* Flash sg list version */ #define SG_LIST_VERSION (1UL) @@ -103,27 +103,6 @@ struct image_header_t { uint32_t size; }; -/* Scatter/gather entry */ -struct opal_sg_entry { - void *data; - long length; -}; - -/* We calculate number of entries based on PAGE_SIZE */ -#define SG_ENTRIES_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct opal_sg_entry)) - -/* - * This struct is very similar but not identical to that - * needed by the opal flash update. All we need to do for - * opal is rewrite num_entries into a version/length and - * translate the pointers to absolute. - */ -struct opal_sg_list { - unsigned long num_entries; - struct opal_sg_list *next; - struct opal_sg_entry entry[SG_ENTRIES_PER_NODE]; -}; - struct validate_flash_t { int status; /* Return status */ void *buf; /* Candidate image buffer */ @@ -333,7 +312,7 @@ static struct opal_sg_list *image_data_to_sglist(void) addr = image_data.data; size = image_data.size; - sg1 = kzalloc((sizeof(struct opal_sg_list)), GFP_KERNEL); + sg1 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!sg1) return NULL; @@ -351,8 +330,7 @@ static struct opal_sg_list *image_data_to_sglist(void) sg1->num_entries++; if (sg1->num_entries >= SG_ENTRIES_PER_NODE) { - sg1->next = kzalloc((sizeof(struct opal_sg_list)), - GFP_KERNEL); + sg1->next = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!sg1->next) { pr_err("%s : Failed to allocate memory\n", __func__); @@ -402,7 +380,10 @@ static int opal_flash_update(int op) else sg->next = NULL; - /* Make num_entries into the version/length field */ + /* + * Convert num_entries to version/length format + * to satisfy OPAL. + */ sg->num_entries = (SG_LIST_VERSION << 56) | (sg->num_entries * sizeof(struct opal_sg_entry) + 16); } diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c new file mode 100644 index 00000000000..ec4132239cd --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c @@ -0,0 +1,146 @@ +/* + * OPAL asynchronus Memory error handling support in PowreNV. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2013 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/mm.h> +#include <linux/slab.h> + +#include <asm/opal.h> +#include <asm/cputable.h> + +static int opal_mem_err_nb_init; +static LIST_HEAD(opal_memory_err_list); +static DEFINE_SPINLOCK(opal_mem_err_lock); + +struct OpalMsgNode { + struct list_head list; + struct opal_msg msg; +}; + +static void handle_memory_error_event(struct OpalMemoryErrorData *merr_evt) +{ + uint64_t paddr_start, paddr_end; + + pr_debug("%s: Retrived memory error event, type: 0x%x\n", + __func__, merr_evt->type); + switch (merr_evt->type) { + case OPAL_MEM_ERR_TYPE_RESILIENCE: + paddr_start = merr_evt->u.resilience.physical_address_start; + paddr_end = merr_evt->u.resilience.physical_address_end; + break; + case OPAL_MEM_ERR_TYPE_DYN_DALLOC: + paddr_start = merr_evt->u.dyn_dealloc.physical_address_start; + paddr_end = merr_evt->u.dyn_dealloc.physical_address_end; + break; + default: + return; + } + + for (; paddr_start < paddr_end; paddr_start += PAGE_SIZE) { + memory_failure(paddr_start >> PAGE_SHIFT, 0, 0); + } +} + +static void handle_memory_error(void) +{ + unsigned long flags; + struct OpalMemoryErrorData *merr_evt; + struct OpalMsgNode *msg_node; + + spin_lock_irqsave(&opal_mem_err_lock, flags); + while (!list_empty(&opal_memory_err_list)) { + msg_node = list_entry(opal_memory_err_list.next, + struct OpalMsgNode, list); + list_del(&msg_node->list); + spin_unlock_irqrestore(&opal_mem_err_lock, flags); + + merr_evt = (struct OpalMemoryErrorData *) + &msg_node->msg.params[0]; + handle_memory_error_event(merr_evt); + kfree(msg_node); + spin_lock_irqsave(&opal_mem_err_lock, flags); + } + spin_unlock_irqrestore(&opal_mem_err_lock, flags); +} + +static void mem_error_handler(struct work_struct *work) +{ + handle_memory_error(); +} + +static DECLARE_WORK(mem_error_work, mem_error_handler); + +/* + * opal_memory_err_event - notifier handler that queues up the opal message + * to be preocessed later. + */ +static int opal_memory_err_event(struct notifier_block *nb, + unsigned long msg_type, void *msg) +{ + unsigned long flags; + struct OpalMsgNode *msg_node; + + if (msg_type != OPAL_MSG_MEM_ERR) + return 0; + + msg_node = kzalloc(sizeof(*msg_node), GFP_ATOMIC); + if (!msg_node) { + pr_err("MEMORY_ERROR: out of memory, Opal message event not" + "handled\n"); + return -ENOMEM; + } + memcpy(&msg_node->msg, msg, sizeof(struct opal_msg)); + + spin_lock_irqsave(&opal_mem_err_lock, flags); + list_add(&msg_node->list, &opal_memory_err_list); + spin_unlock_irqrestore(&opal_mem_err_lock, flags); + + schedule_work(&mem_error_work); + return 0; +} + +static struct notifier_block opal_mem_err_nb = { + .notifier_call = opal_memory_err_event, + .next = NULL, + .priority = 0, +}; + +static int __init opal_mem_err_init(void) +{ + int ret; + + if (!opal_mem_err_nb_init) { + ret = opal_message_notifier_register( + OPAL_MSG_MEM_ERR, &opal_mem_err_nb); + if (ret) { + pr_err("%s: Can't register OPAL event notifier (%d)\n", + __func__, ret); + return ret; + } + opal_mem_err_nb_init = 1; + } + return 0; +} +subsys_initcall(opal_mem_err_init); diff --git a/arch/powerpc/platforms/powernv/opal-rtc.c b/arch/powerpc/platforms/powernv/opal-rtc.c index 7d07c7e80ec..b1885db8fdf 100644 --- a/arch/powerpc/platforms/powernv/opal-rtc.c +++ b/arch/powerpc/platforms/powernv/opal-rtc.c @@ -18,6 +18,7 @@ #include <asm/opal.h> #include <asm/firmware.h> +#include <asm/machdep.h> static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm) { @@ -48,8 +49,11 @@ unsigned long __init opal_get_boot_time(void) else mdelay(10); } - if (rc != OPAL_SUCCESS) + if (rc != OPAL_SUCCESS) { + ppc_md.get_rtc_time = NULL; + ppc_md.set_rtc_time = NULL; return 0; + } y_m_d = be32_to_cpu(__y_m_d); h_m_s_ms = be64_to_cpu(__h_m_s_ms); opal_to_tm(y_m_d, h_m_s_ms, &tm); diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index e7806504e97..3e8829c40fb 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -126,3 +126,6 @@ OPAL_CALL(opal_return_cpu, OPAL_RETURN_CPU); OPAL_CALL(opal_validate_flash, OPAL_FLASH_VALIDATE); OPAL_CALL(opal_manage_flash, OPAL_FLASH_MANAGE); OPAL_CALL(opal_update_flash, OPAL_FLASH_UPDATE); +OPAL_CALL(opal_get_msg, OPAL_GET_MSG); +OPAL_CALL(opal_check_completion, OPAL_CHECK_ASYNC_COMPLETION); +OPAL_CALL(opal_sync_host_reboot, OPAL_SYNC_HOST_REBOOT); diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c index 4fbf276ac99..4cd2ea6c0db 100644 --- a/arch/powerpc/platforms/powernv/opal-xscom.c +++ b/arch/powerpc/platforms/powernv/opal-xscom.c @@ -71,11 +71,11 @@ static int opal_xscom_err_xlate(int64_t rc) } } -static u64 opal_scom_unmangle(u64 reg) +static u64 opal_scom_unmangle(u64 addr) { /* * XSCOM indirect addresses have the top bit set. Additionally - * the reset of the top 3 nibbles is always 0. + * the rest of the top 3 nibbles is always 0. * * Because the debugfs interface uses signed offsets and shifts * the address left by 3, we basically cannot use the top 4 bits @@ -86,10 +86,13 @@ static u64 opal_scom_unmangle(u64 reg) * conversion here. To leave room for further xscom address * expansion, we only clear out the top byte * + * For in-kernel use, we also support the real indirect bit, so + * we test for any of the top 5 bits + * */ - if (reg & (1ull << 59)) - reg = (reg & ~(0xffull << 56)) | (1ull << 63); - return reg; + if (addr & (0x1full << 59)) + addr = (addr & ~(0xffull << 56)) | (1ull << 63); + return addr; } static int opal_scom_read(scom_map_t map, u64 reg, u64 *value) @@ -98,8 +101,8 @@ static int opal_scom_read(scom_map_t map, u64 reg, u64 *value) int64_t rc; __be64 v; - reg = opal_scom_unmangle(reg); - rc = opal_xscom_read(m->chip, m->addr + reg, (__be64 *)__pa(&v)); + reg = opal_scom_unmangle(m->addr + reg); + rc = opal_xscom_read(m->chip, reg, (__be64 *)__pa(&v)); *value = be64_to_cpu(v); return opal_xscom_err_xlate(rc); } @@ -109,8 +112,8 @@ static int opal_scom_write(scom_map_t map, u64 reg, u64 value) struct opal_scom_map *m = map; int64_t rc; - reg = opal_scom_unmangle(reg); - rc = opal_xscom_write(m->chip, m->addr + reg, value); + reg = opal_scom_unmangle(m->addr + reg); + rc = opal_xscom_write(m->chip, reg, value); return opal_xscom_err_xlate(rc); } diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 1c798cd5537..65499adaecf 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -18,9 +18,12 @@ #include <linux/interrupt.h> #include <linux/notifier.h> #include <linux/slab.h> +#include <linux/sched.h> #include <linux/kobject.h> +#include <linux/delay.h> #include <asm/opal.h> #include <asm/firmware.h> +#include <asm/mce.h> #include "powernv.h" @@ -38,6 +41,7 @@ extern u64 opal_mc_secondary_handler[]; static unsigned int *opal_irqs; static unsigned int opal_irq_count; static ATOMIC_NOTIFIER_HEAD(opal_notifier_head); +static struct atomic_notifier_head opal_msg_notifier_head[OPAL_MSG_TYPE_MAX]; static DEFINE_SPINLOCK(opal_notifier_lock); static uint64_t last_notified_mask = 0x0ul; static atomic_t opal_notifier_hold = ATOMIC_INIT(0); @@ -88,14 +92,10 @@ static int __init opal_register_exception_handlers(void) if (!(powerpc_firmware_features & FW_FEATURE_OPAL)) return -ENODEV; - /* Hookup some exception handlers. We use the fwnmi area at 0x7000 - * to provide the glue space to OPAL + /* Hookup some exception handlers except machine check. We use the + * fwnmi area at 0x7000 to provide the glue space to OPAL */ glue = 0x7000; - opal_register_exception_handler(OPAL_MACHINE_CHECK_HANDLER, - __pa(opal_mc_secondary_handler[0]), - glue); - glue += 128; opal_register_exception_handler(OPAL_HYPERVISOR_MAINTENANCE_HANDLER, 0, glue); glue += 128; @@ -169,6 +169,95 @@ void opal_notifier_disable(void) atomic_set(&opal_notifier_hold, 1); } +/* + * Opal message notifier based on message type. Allow subscribers to get + * notified for specific messgae type. + */ +int opal_message_notifier_register(enum OpalMessageType msg_type, + struct notifier_block *nb) +{ + if (!nb) { + pr_warning("%s: Invalid argument (%p)\n", + __func__, nb); + return -EINVAL; + } + if (msg_type > OPAL_MSG_TYPE_MAX) { + pr_warning("%s: Invalid message type argument (%d)\n", + __func__, msg_type); + return -EINVAL; + } + return atomic_notifier_chain_register( + &opal_msg_notifier_head[msg_type], nb); +} + +static void opal_message_do_notify(uint32_t msg_type, void *msg) +{ + /* notify subscribers */ + atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type], + msg_type, msg); +} + +static void opal_handle_message(void) +{ + s64 ret; + /* + * TODO: pre-allocate a message buffer depending on opal-msg-size + * value in /proc/device-tree. + */ + static struct opal_msg msg; + + ret = opal_get_msg(__pa(&msg), sizeof(msg)); + /* No opal message pending. */ + if (ret == OPAL_RESOURCE) + return; + + /* check for errors. */ + if (ret) { + pr_warning("%s: Failed to retrive opal message, err=%lld\n", + __func__, ret); + return; + } + + /* Sanity check */ + if (msg.msg_type > OPAL_MSG_TYPE_MAX) { + pr_warning("%s: Unknown message type: %u\n", + __func__, msg.msg_type); + return; + } + opal_message_do_notify(msg.msg_type, (void *)&msg); +} + +static int opal_message_notify(struct notifier_block *nb, + unsigned long events, void *change) +{ + if (events & OPAL_EVENT_MSG_PENDING) + opal_handle_message(); + return 0; +} + +static struct notifier_block opal_message_nb = { + .notifier_call = opal_message_notify, + .next = NULL, + .priority = 0, +}; + +static int __init opal_message_init(void) +{ + int ret, i; + + for (i = 0; i < OPAL_MSG_TYPE_MAX; i++) + ATOMIC_INIT_NOTIFIER_HEAD(&opal_msg_notifier_head[i]); + + ret = opal_notifier_register(&opal_message_nb); + if (ret) { + pr_err("%s: Can't register OPAL event notifier (%d)\n", + __func__, ret); + return ret; + } + return 0; +} +early_initcall(opal_message_init); + int opal_get_chars(uint32_t vtermno, char *buf, int count) { s64 rc; @@ -254,119 +343,62 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len) return written; } +static int opal_recover_mce(struct pt_regs *regs, + struct machine_check_event *evt) +{ + int recovered = 0; + uint64_t ea = get_mce_fault_addr(evt); + + if (!(regs->msr & MSR_RI)) { + /* If MSR_RI isn't set, we cannot recover */ + recovered = 0; + } else if (evt->disposition == MCE_DISPOSITION_RECOVERED) { + /* Platform corrected itself */ + recovered = 1; + } else if (ea && !is_kernel_addr(ea)) { + /* + * Faulting address is not in kernel text. We should be fine. + * We need to find which process uses this address. + * For now, kill the task if we have received exception when + * in userspace. + * + * TODO: Queue up this address for hwpoisioning later. + */ + if (user_mode(regs) && !is_global_init(current)) { + _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip); + recovered = 1; + } else + recovered = 0; + } else if (user_mode(regs) && !is_global_init(current) && + evt->severity == MCE_SEV_ERROR_SYNC) { + /* + * If we have received a synchronous error when in userspace + * kill the task. + */ + _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip); + recovered = 1; + } + return recovered; +} + int opal_machine_check(struct pt_regs *regs) { - struct opal_machine_check_event *opal_evt = get_paca()->opal_mc_evt; - struct opal_machine_check_event evt; - const char *level, *sevstr, *subtype; - static const char *opal_mc_ue_types[] = { - "Indeterminate", - "Instruction fetch", - "Page table walk ifetch", - "Load/Store", - "Page table walk Load/Store", - }; - static const char *opal_mc_slb_types[] = { - "Indeterminate", - "Parity", - "Multihit", - }; - static const char *opal_mc_erat_types[] = { - "Indeterminate", - "Parity", - "Multihit", - }; - static const char *opal_mc_tlb_types[] = { - "Indeterminate", - "Parity", - "Multihit", - }; - - /* Copy the event structure and release the original */ - evt = *opal_evt; - opal_evt->in_use = 0; + struct machine_check_event evt; + + if (!get_mce_event(&evt, MCE_EVENT_RELEASE)) + return 0; /* Print things out */ - if (evt.version != OpalMCE_V1) { + if (evt.version != MCE_V1) { pr_err("Machine Check Exception, Unknown event version %d !\n", evt.version); return 0; } - switch(evt.severity) { - case OpalMCE_SEV_NO_ERROR: - level = KERN_INFO; - sevstr = "Harmless"; - break; - case OpalMCE_SEV_WARNING: - level = KERN_WARNING; - sevstr = ""; - break; - case OpalMCE_SEV_ERROR_SYNC: - level = KERN_ERR; - sevstr = "Severe"; - break; - case OpalMCE_SEV_FATAL: - default: - level = KERN_ERR; - sevstr = "Fatal"; - break; - } + machine_check_print_event_info(&evt); - printk("%s%s Machine check interrupt [%s]\n", level, sevstr, - evt.disposition == OpalMCE_DISPOSITION_RECOVERED ? - "Recovered" : "[Not recovered"); - printk("%s Initiator: %s\n", level, - evt.initiator == OpalMCE_INITIATOR_CPU ? "CPU" : "Unknown"); - switch(evt.error_type) { - case OpalMCE_ERROR_TYPE_UE: - subtype = evt.u.ue_error.ue_error_type < - ARRAY_SIZE(opal_mc_ue_types) ? - opal_mc_ue_types[evt.u.ue_error.ue_error_type] - : "Unknown"; - printk("%s Error type: UE [%s]\n", level, subtype); - if (evt.u.ue_error.effective_address_provided) - printk("%s Effective address: %016llx\n", - level, evt.u.ue_error.effective_address); - if (evt.u.ue_error.physical_address_provided) - printk("%s Physial address: %016llx\n", - level, evt.u.ue_error.physical_address); - break; - case OpalMCE_ERROR_TYPE_SLB: - subtype = evt.u.slb_error.slb_error_type < - ARRAY_SIZE(opal_mc_slb_types) ? - opal_mc_slb_types[evt.u.slb_error.slb_error_type] - : "Unknown"; - printk("%s Error type: SLB [%s]\n", level, subtype); - if (evt.u.slb_error.effective_address_provided) - printk("%s Effective address: %016llx\n", - level, evt.u.slb_error.effective_address); - break; - case OpalMCE_ERROR_TYPE_ERAT: - subtype = evt.u.erat_error.erat_error_type < - ARRAY_SIZE(opal_mc_erat_types) ? - opal_mc_erat_types[evt.u.erat_error.erat_error_type] - : "Unknown"; - printk("%s Error type: ERAT [%s]\n", level, subtype); - if (evt.u.erat_error.effective_address_provided) - printk("%s Effective address: %016llx\n", - level, evt.u.erat_error.effective_address); - break; - case OpalMCE_ERROR_TYPE_TLB: - subtype = evt.u.tlb_error.tlb_error_type < - ARRAY_SIZE(opal_mc_tlb_types) ? - opal_mc_tlb_types[evt.u.tlb_error.tlb_error_type] - : "Unknown"; - printk("%s Error type: TLB [%s]\n", level, subtype); - if (evt.u.tlb_error.effective_address_provided) - printk("%s Effective address: %016llx\n", - level, evt.u.tlb_error.effective_address); - break; - default: - case OpalMCE_ERROR_TYPE_UNKNOWN: - printk("%s Error type: Unknown\n", level); - break; - } - return evt.severity == OpalMCE_SEV_FATAL ? 0 : 1; + if (opal_recover_mce(regs, &evt)) + return 1; + return 0; } static irqreturn_t opal_interrupt(int irq, void *data) @@ -451,10 +483,25 @@ subsys_initcall(opal_init); void opal_shutdown(void) { unsigned int i; + long rc = OPAL_BUSY; + /* First free interrupts, which will also mask them */ for (i = 0; i < opal_irq_count; i++) { if (opal_irqs[i]) free_irq(opal_irqs[i], NULL); opal_irqs[i] = 0; } + + /* + * Then sync with OPAL which ensure anything that can + * potentially write to our memory has completed such + * as an ongoing dump retrieval + */ + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_sync_host_reboot(); + if (rc == OPAL_BUSY) + opal_poll_events(NULL); + else + mdelay(10); + } } diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 2c6d173842b..3b2b4fb3585 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -21,6 +21,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/msi.h> +#include <linux/memblock.h> #include <asm/sections.h> #include <asm/io.h> @@ -460,7 +461,37 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev return; pe = &phb->ioda.pe_array[pdn->pe_number]; - set_iommu_table_base(&pdev->dev, &pe->tce32_table); + WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops); + set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table); +} + +static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb, + struct pci_dev *pdev, u64 dma_mask) +{ + struct pci_dn *pdn = pci_get_pdn(pdev); + struct pnv_ioda_pe *pe; + uint64_t top; + bool bypass = false; + + if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE)) + return -ENODEV;; + + pe = &phb->ioda.pe_array[pdn->pe_number]; + if (pe->tce_bypass_enabled) { + top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1; + bypass = (dma_mask >= top); + } + + if (bypass) { + dev_info(&pdev->dev, "Using 64-bit DMA iommu bypass\n"); + set_dma_ops(&pdev->dev, &dma_direct_ops); + set_dma_offset(&pdev->dev, pe->tce_bypass_base); + } else { + dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n"); + set_dma_ops(&pdev->dev, &dma_iommu_ops); + set_iommu_table_base(&pdev->dev, &pe->tce32_table); + } + return 0; } static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus) @@ -468,7 +499,7 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus) struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { - set_iommu_table_base(&dev->dev, &pe->tce32_table); + set_iommu_table_base_and_group(&dev->dev, &pe->tce32_table); if (dev->subordinate) pnv_ioda_setup_bus_dma(pe, dev->subordinate); } @@ -644,7 +675,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number); if (pe->pdev) - set_iommu_table_base(&pe->pdev->dev, tbl); + set_iommu_table_base_and_group(&pe->pdev->dev, tbl); else pnv_ioda_setup_bus_dma(pe, pe->pbus); @@ -657,6 +688,56 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, __free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs)); } +static void pnv_pci_ioda2_set_bypass(struct iommu_table *tbl, bool enable) +{ + struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe, + tce32_table); + uint16_t window_id = (pe->pe_number << 1 ) + 1; + int64_t rc; + + pe_info(pe, "%sabling 64-bit DMA bypass\n", enable ? "En" : "Dis"); + if (enable) { + phys_addr_t top = memblock_end_of_DRAM(); + + top = roundup_pow_of_two(top); + rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id, + pe->pe_number, + window_id, + pe->tce_bypass_base, + top); + } else { + rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id, + pe->pe_number, + window_id, + pe->tce_bypass_base, + 0); + + /* + * We might want to reset the DMA ops of all devices on + * this PE. However in theory, that shouldn't be necessary + * as this is used for VFIO/KVM pass-through and the device + * hasn't yet been returned to its kernel driver + */ + } + if (rc) + pe_err(pe, "OPAL error %lld configuring bypass window\n", rc); + else + pe->tce_bypass_enabled = enable; +} + +static void pnv_pci_ioda2_setup_bypass_pe(struct pnv_phb *phb, + struct pnv_ioda_pe *pe) +{ + /* TVE #1 is selected by PCI address bit 59 */ + pe->tce_bypass_base = 1ull << 59; + + /* Install set_bypass callback for VFIO */ + pe->tce32_table.set_bypass = pnv_pci_ioda2_set_bypass; + + /* Enable bypass by default */ + pnv_pci_ioda2_set_bypass(&pe->tce32_table, true); +} + static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe) { @@ -723,10 +804,12 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number); if (pe->pdev) - set_iommu_table_base(&pe->pdev->dev, tbl); + set_iommu_table_base_and_group(&pe->pdev->dev, tbl); else pnv_ioda_setup_bus_dma(pe, pe->pbus); + /* Also create a bypass window */ + pnv_pci_ioda2_setup_bypass_pe(phb, pe); return; fail: if (pe->tce32_seg >= 0) @@ -1144,7 +1227,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, { struct pci_controller *hose; struct pnv_phb *phb; - unsigned long size, m32map_off, iomap_off, pemap_off; + unsigned long size, m32map_off, pemap_off, iomap_off = 0; const __be64 *prop64; const __be32 *prop32; int len; @@ -1231,7 +1314,6 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long)); m32map_off = size; size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]); - iomap_off = size; if (phb->type == PNV_PHB_IODA1) { iomap_off = size; size += phb->ioda.total_pe * sizeof(phb->ioda.io_segmap[0]); @@ -1287,6 +1369,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, /* Setup TCEs */ phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup; + phb->dma_set_mask = pnv_pci_ioda_dma_set_mask; /* Setup shutdown function for kexec */ phb->shutdown = pnv_pci_ioda_shutdown; diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c index f8b4bd8afb2..e3807d69393 100644 --- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c +++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c @@ -92,7 +92,7 @@ static void pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb, pci_domain_nr(phb->hose->bus), phb->opal_id); } - set_iommu_table_base(&pdev->dev, &phb->p5ioc2.iommu_table); + set_iommu_table_base_and_group(&pdev->dev, &phb->p5ioc2.iommu_table); } static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id, diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 4eb33a9ed53..8518817dcdf 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -124,77 +124,187 @@ static void pnv_teardown_msi_irqs(struct pci_dev *pdev) } #endif /* CONFIG_PCI_MSI */ -static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb) +static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose, + struct OpalIoPhbErrorCommon *common) { - struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc; + struct OpalIoP7IOCPhbErrorData *data; int i; - pr_info("PHB %d diagnostic data:\n", phb->hose->global_number); - - pr_info(" brdgCtl = 0x%08x\n", data->brdgCtl); - - pr_info(" portStatusReg = 0x%08x\n", data->portStatusReg); - pr_info(" rootCmplxStatus = 0x%08x\n", data->rootCmplxStatus); - pr_info(" busAgentStatus = 0x%08x\n", data->busAgentStatus); - - pr_info(" deviceStatus = 0x%08x\n", data->deviceStatus); - pr_info(" slotStatus = 0x%08x\n", data->slotStatus); - pr_info(" linkStatus = 0x%08x\n", data->linkStatus); - pr_info(" devCmdStatus = 0x%08x\n", data->devCmdStatus); - pr_info(" devSecStatus = 0x%08x\n", data->devSecStatus); - - pr_info(" rootErrorStatus = 0x%08x\n", data->rootErrorStatus); - pr_info(" uncorrErrorStatus = 0x%08x\n", data->uncorrErrorStatus); - pr_info(" corrErrorStatus = 0x%08x\n", data->corrErrorStatus); - pr_info(" tlpHdr1 = 0x%08x\n", data->tlpHdr1); - pr_info(" tlpHdr2 = 0x%08x\n", data->tlpHdr2); - pr_info(" tlpHdr3 = 0x%08x\n", data->tlpHdr3); - pr_info(" tlpHdr4 = 0x%08x\n", data->tlpHdr4); - pr_info(" sourceId = 0x%08x\n", data->sourceId); - - pr_info(" errorClass = 0x%016llx\n", data->errorClass); - pr_info(" correlator = 0x%016llx\n", data->correlator); - - pr_info(" p7iocPlssr = 0x%016llx\n", data->p7iocPlssr); - pr_info(" p7iocCsr = 0x%016llx\n", data->p7iocCsr); - pr_info(" lemFir = 0x%016llx\n", data->lemFir); - pr_info(" lemErrorMask = 0x%016llx\n", data->lemErrorMask); - pr_info(" lemWOF = 0x%016llx\n", data->lemWOF); - pr_info(" phbErrorStatus = 0x%016llx\n", data->phbErrorStatus); - pr_info(" phbFirstErrorStatus = 0x%016llx\n", data->phbFirstErrorStatus); - pr_info(" phbErrorLog0 = 0x%016llx\n", data->phbErrorLog0); - pr_info(" phbErrorLog1 = 0x%016llx\n", data->phbErrorLog1); - pr_info(" mmioErrorStatus = 0x%016llx\n", data->mmioErrorStatus); - pr_info(" mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus); - pr_info(" mmioErrorLog0 = 0x%016llx\n", data->mmioErrorLog0); - pr_info(" mmioErrorLog1 = 0x%016llx\n", data->mmioErrorLog1); - pr_info(" dma0ErrorStatus = 0x%016llx\n", data->dma0ErrorStatus); - pr_info(" dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus); - pr_info(" dma0ErrorLog0 = 0x%016llx\n", data->dma0ErrorLog0); - pr_info(" dma0ErrorLog1 = 0x%016llx\n", data->dma0ErrorLog1); - pr_info(" dma1ErrorStatus = 0x%016llx\n", data->dma1ErrorStatus); - pr_info(" dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus); - pr_info(" dma1ErrorLog0 = 0x%016llx\n", data->dma1ErrorLog0); - pr_info(" dma1ErrorLog1 = 0x%016llx\n", data->dma1ErrorLog1); + data = (struct OpalIoP7IOCPhbErrorData *)common; + pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n\n", + hose->global_number, common->version); + + if (data->brdgCtl) + pr_info(" brdgCtl: %08x\n", + data->brdgCtl); + if (data->portStatusReg || data->rootCmplxStatus || + data->busAgentStatus) + pr_info(" UtlSts: %08x %08x %08x\n", + data->portStatusReg, data->rootCmplxStatus, + data->busAgentStatus); + if (data->deviceStatus || data->slotStatus || + data->linkStatus || data->devCmdStatus || + data->devSecStatus) + pr_info(" RootSts: %08x %08x %08x %08x %08x\n", + data->deviceStatus, data->slotStatus, + data->linkStatus, data->devCmdStatus, + data->devSecStatus); + if (data->rootErrorStatus || data->uncorrErrorStatus || + data->corrErrorStatus) + pr_info(" RootErrSts: %08x %08x %08x\n", + data->rootErrorStatus, data->uncorrErrorStatus, + data->corrErrorStatus); + if (data->tlpHdr1 || data->tlpHdr2 || + data->tlpHdr3 || data->tlpHdr4) + pr_info(" RootErrLog: %08x %08x %08x %08x\n", + data->tlpHdr1, data->tlpHdr2, + data->tlpHdr3, data->tlpHdr4); + if (data->sourceId || data->errorClass || + data->correlator) + pr_info(" RootErrLog1: %08x %016llx %016llx\n", + data->sourceId, data->errorClass, + data->correlator); + if (data->p7iocPlssr || data->p7iocCsr) + pr_info(" PhbSts: %016llx %016llx\n", + data->p7iocPlssr, data->p7iocCsr); + if (data->lemFir || data->lemErrorMask || + data->lemWOF) + pr_info(" Lem: %016llx %016llx %016llx\n", + data->lemFir, data->lemErrorMask, + data->lemWOF); + if (data->phbErrorStatus || data->phbFirstErrorStatus || + data->phbErrorLog0 || data->phbErrorLog1) + pr_info(" PhbErr: %016llx %016llx %016llx %016llx\n", + data->phbErrorStatus, data->phbFirstErrorStatus, + data->phbErrorLog0, data->phbErrorLog1); + if (data->mmioErrorStatus || data->mmioFirstErrorStatus || + data->mmioErrorLog0 || data->mmioErrorLog1) + pr_info(" OutErr: %016llx %016llx %016llx %016llx\n", + data->mmioErrorStatus, data->mmioFirstErrorStatus, + data->mmioErrorLog0, data->mmioErrorLog1); + if (data->dma0ErrorStatus || data->dma0FirstErrorStatus || + data->dma0ErrorLog0 || data->dma0ErrorLog1) + pr_info(" InAErr: %016llx %016llx %016llx %016llx\n", + data->dma0ErrorStatus, data->dma0FirstErrorStatus, + data->dma0ErrorLog0, data->dma0ErrorLog1); + if (data->dma1ErrorStatus || data->dma1FirstErrorStatus || + data->dma1ErrorLog0 || data->dma1ErrorLog1) + pr_info(" InBErr: %016llx %016llx %016llx %016llx\n", + data->dma1ErrorStatus, data->dma1FirstErrorStatus, + data->dma1ErrorLog0, data->dma1ErrorLog1); for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { if ((data->pestA[i] >> 63) == 0 && (data->pestB[i] >> 63) == 0) continue; - pr_info(" PE[%3d] PESTA = 0x%016llx\n", i, data->pestA[i]); - pr_info(" PESTB = 0x%016llx\n", data->pestB[i]); + + pr_info(" PE[%3d] A/B: %016llx %016llx\n", + i, data->pestA[i], data->pestB[i]); } } -static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb) +static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose, + struct OpalIoPhbErrorCommon *common) { - switch(phb->model) { - case PNV_PHB_MODEL_P7IOC: - pnv_pci_dump_p7ioc_diag_data(phb); + struct OpalIoPhb3ErrorData *data; + int i; + + data = (struct OpalIoPhb3ErrorData*)common; + pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n\n", + hose->global_number, common->version); + if (data->brdgCtl) + pr_info(" brdgCtl: %08x\n", + data->brdgCtl); + if (data->portStatusReg || data->rootCmplxStatus || + data->busAgentStatus) + pr_info(" UtlSts: %08x %08x %08x\n", + data->portStatusReg, data->rootCmplxStatus, + data->busAgentStatus); + if (data->deviceStatus || data->slotStatus || + data->linkStatus || data->devCmdStatus || + data->devSecStatus) + pr_info(" RootSts: %08x %08x %08x %08x %08x\n", + data->deviceStatus, data->slotStatus, + data->linkStatus, data->devCmdStatus, + data->devSecStatus); + if (data->rootErrorStatus || data->uncorrErrorStatus || + data->corrErrorStatus) + pr_info(" RootErrSts: %08x %08x %08x\n", + data->rootErrorStatus, data->uncorrErrorStatus, + data->corrErrorStatus); + if (data->tlpHdr1 || data->tlpHdr2 || + data->tlpHdr3 || data->tlpHdr4) + pr_info(" RootErrLog: %08x %08x %08x %08x\n", + data->tlpHdr1, data->tlpHdr2, + data->tlpHdr3, data->tlpHdr4); + if (data->sourceId || data->errorClass || + data->correlator) + pr_info(" RootErrLog1: %08x %016llx %016llx\n", + data->sourceId, data->errorClass, + data->correlator); + if (data->nFir || data->nFirMask || + data->nFirWOF) + pr_info(" nFir: %016llx %016llx %016llx\n", + data->nFir, data->nFirMask, + data->nFirWOF); + if (data->phbPlssr || data->phbCsr) + pr_info(" PhbSts: %016llx %016llx\n", + data->phbPlssr, data->phbCsr); + if (data->lemFir || data->lemErrorMask || + data->lemWOF) + pr_info(" Lem: %016llx %016llx %016llx\n", + data->lemFir, data->lemErrorMask, + data->lemWOF); + if (data->phbErrorStatus || data->phbFirstErrorStatus || + data->phbErrorLog0 || data->phbErrorLog1) + pr_info(" PhbErr: %016llx %016llx %016llx %016llx\n", + data->phbErrorStatus, data->phbFirstErrorStatus, + data->phbErrorLog0, data->phbErrorLog1); + if (data->mmioErrorStatus || data->mmioFirstErrorStatus || + data->mmioErrorLog0 || data->mmioErrorLog1) + pr_info(" OutErr: %016llx %016llx %016llx %016llx\n", + data->mmioErrorStatus, data->mmioFirstErrorStatus, + data->mmioErrorLog0, data->mmioErrorLog1); + if (data->dma0ErrorStatus || data->dma0FirstErrorStatus || + data->dma0ErrorLog0 || data->dma0ErrorLog1) + pr_info(" InAErr: %016llx %016llx %016llx %016llx\n", + data->dma0ErrorStatus, data->dma0FirstErrorStatus, + data->dma0ErrorLog0, data->dma0ErrorLog1); + if (data->dma1ErrorStatus || data->dma1FirstErrorStatus || + data->dma1ErrorLog0 || data->dma1ErrorLog1) + pr_info(" InBErr: %016llx %016llx %016llx %016llx\n", + data->dma1ErrorStatus, data->dma1FirstErrorStatus, + data->dma1ErrorLog0, data->dma1ErrorLog1); + + for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) { + if ((data->pestA[i] >> 63) == 0 && + (data->pestB[i] >> 63) == 0) + continue; + + pr_info(" PE[%3d] A/B: %016llx %016llx\n", + i, data->pestA[i], data->pestB[i]); + } +} + +void pnv_pci_dump_phb_diag_data(struct pci_controller *hose, + unsigned char *log_buff) +{ + struct OpalIoPhbErrorCommon *common; + + if (!hose || !log_buff) + return; + + common = (struct OpalIoPhbErrorCommon *)log_buff; + switch (common->ioType) { + case OPAL_PHB_ERROR_DATA_TYPE_P7IOC: + pnv_pci_dump_p7ioc_diag_data(hose, common); + break; + case OPAL_PHB_ERROR_DATA_TYPE_PHB3: + pnv_pci_dump_phb3_diag_data(hose, common); break; default: - pr_warning("PCI %d: Can't decode this PHB diag data\n", - phb->hose->global_number); + pr_warn("%s: Unrecognized ioType %d\n", + __func__, common->ioType); } } @@ -222,7 +332,7 @@ static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no) * with the normal errors generated when probing empty slots */ if (has_diag) - pnv_pci_dump_phb_diag_data(phb); + pnv_pci_dump_phb_diag_data(phb->hose, phb->diag.blob); else pr_warning("PCI %d: No diag data available\n", phb->hose->global_number); @@ -484,7 +594,8 @@ void pnv_pci_setup_iommu_table(struct iommu_table *tbl, { tbl->it_blocksize = 16; tbl->it_base = (unsigned long)tce_mem; - tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT; + tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; + tbl->it_offset = dma_offset >> tbl->it_page_shift; tbl->it_index = 0; tbl->it_size = tce_size >> 3; tbl->it_busno = 0; @@ -536,7 +647,7 @@ static void pnv_pci_dma_fallback_setup(struct pci_controller *hose, pdn->iommu_table = pnv_pci_setup_bml_iommu(hose); if (!pdn->iommu_table) return; - set_iommu_table_base(&pdev->dev, pdn->iommu_table); + set_iommu_table_base_and_group(&pdev->dev, pdn->iommu_table); } static void pnv_pci_dma_dev_setup(struct pci_dev *pdev) @@ -553,6 +664,16 @@ static void pnv_pci_dma_dev_setup(struct pci_dev *pdev) pnv_pci_dma_fallback_setup(hose, pdev); } +int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct pnv_phb *phb = hose->private_data; + + if (phb && phb->dma_set_mask) + return phb->dma_set_mask(phb, pdev, dma_mask); + return __dma_set_mask(&pdev->dev, dma_mask); +} + void pnv_pci_shutdown(void) { struct pci_controller *hose; @@ -657,3 +778,32 @@ void __init pnv_pci_init(void) ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs; #endif } + +static int tce_iommu_bus_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + + switch (action) { + case BUS_NOTIFY_ADD_DEVICE: + return iommu_add_device(dev); + case BUS_NOTIFY_DEL_DEVICE: + if (dev->iommu_group) + iommu_del_device(dev); + return 0; + default: + return 0; + } +} + +static struct notifier_block tce_iommu_bus_nb = { + .notifier_call = tce_iommu_bus_notifier, +}; + +static int __init tce_iommu_bus_notifier_init(void) +{ + bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb); + return 0; +} + +subsys_initcall_sync(tce_iommu_bus_notifier_init); diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 1ed8d5f40f5..cde16944277 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -54,7 +54,9 @@ struct pnv_ioda_pe { struct iommu_table tce32_table; phys_addr_t tce_inval_reg_phys; - /* XXX TODO: Add support for additional 64-bit iommus */ + /* 64-bit TCE bypass region */ + bool tce_bypass_enabled; + uint64_t tce_bypass_base; /* MSIs. MVE index is identical for for 32 and 64 bit MSI * and -1 if not supported. (It's actually identical to the @@ -113,6 +115,8 @@ struct pnv_phb { unsigned int hwirq, unsigned int virq, unsigned int is_64, struct msi_msg *msg); void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev); + int (*dma_set_mask)(struct pnv_phb *phb, struct pci_dev *pdev, + u64 dma_mask); void (*fixup_phb)(struct pci_controller *hose); u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn); void (*shutdown)(struct pnv_phb *phb); @@ -176,6 +180,7 @@ struct pnv_phb { union { unsigned char blob[PNV_PCI_DIAG_BUF_SIZE]; struct OpalIoP7IOCPhbErrorData p7ioc; + struct OpalIoPhb3ErrorData phb3; struct OpalIoP7IOCErrorData hub_diag; } diag; @@ -186,6 +191,8 @@ extern struct pci_ops pnv_pci_ops; extern struct pnv_eeh_ops ioda_eeh_ops; #endif +void pnv_pci_dump_phb_diag_data(struct pci_controller *hose, + unsigned char *log_buff); int pnv_pci_cfg_read(struct device_node *dn, int where, int size, u32 *val); int pnv_pci_cfg_write(struct device_node *dn, diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index de6819be1f9..0051e108ef0 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -7,12 +7,20 @@ extern void pnv_smp_init(void); static inline void pnv_smp_init(void) { } #endif +struct pci_dev; + #ifdef CONFIG_PCI extern void pnv_pci_init(void); extern void pnv_pci_shutdown(void); +extern int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask); #else static inline void pnv_pci_init(void) { } static inline void pnv_pci_shutdown(void) { } + +static inline int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask) +{ + return -ENODEV; +} #endif extern void pnv_lpc_init(void); diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 19884b2a51b..110f4fbd319 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -26,6 +26,8 @@ #include <linux/of_fdt.h> #include <linux/interrupt.h> #include <linux/bug.h> +#include <linux/cpuidle.h> +#include <linux/pci.h> #include <asm/machdep.h> #include <asm/firmware.h> @@ -140,13 +142,22 @@ static void pnv_progress(char *s, unsigned short hex) { } +static int pnv_dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (dev_is_pci(dev)) + return pnv_pci_dma_set_mask(to_pci_dev(dev), dma_mask); + return __dma_set_mask(dev, dma_mask); +} + static void pnv_shutdown(void) { /* Let the PCI code clear up IODA tables */ pnv_pci_shutdown(); - /* And unregister all OPAL interrupts so they don't fire - * up while we kexec + /* + * Stop OPAL activity: Unregister all OPAL interrupts so they + * don't fire up while we kexec and make sure all potentially + * DMA'ing ops are complete (such as dump retrieval). */ opal_shutdown(); } @@ -214,6 +225,16 @@ static int __init pnv_probe(void) return 1; } +void powernv_idle(void) +{ + /* Hook to cpuidle framework if available, else + * call on default platform idle code + */ + if (cpuidle_idle_call()) { + power7_idle(); + } +} + define_machine(powernv) { .name = "PowerNV", .probe = pnv_probe, @@ -223,8 +244,9 @@ define_machine(powernv) { .show_cpuinfo = pnv_show_cpuinfo, .progress = pnv_progress, .machine_shutdown = pnv_shutdown, - .power_save = power7_idle, + .power_save = powernv_idle, .calibrate_decr = generic_calibrate_decr, + .dma_set_mask = pnv_dma_set_mask, #ifdef CONFIG_KEXEC .kexec_cpu_down = pnv_kexec_cpu_down, #endif diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index e17fa1432d8..a0bca05e26b 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -143,7 +143,7 @@ static void _dump_areas(unsigned int spe_id, unsigned long priv2, pr_debug("%s:%d: shadow: %lxh\n", func, line, shadow); } -inline u64 ps3_get_spe_id(void *arg) +u64 ps3_get_spe_id(void *arg) { return spu_pdata(arg)->spe_id; } diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 62b4f8025de..80b1d57c306 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -20,6 +20,7 @@ config PPC_PSERIES select PPC_DOORBELL select HAVE_CONTEXT_TRACKING select HOTPLUG_CPU if SMP + select ARCH_RANDOM default y config PPC_SPLPAR @@ -34,7 +35,7 @@ config PPC_SPLPAR config PSERIES_MSI bool - depends on PCI_MSI && EEH + depends on PCI_MSI && PPC_PSERIES && EEH default y config PSERIES_ENERGY @@ -119,12 +120,3 @@ config DTL which are accessible through a debugfs file. Say N if you are unsure. - -config PSERIES_IDLE - bool "Cpuidle driver for pSeries platforms" - depends on CPU_IDLE - depends on PPC_PSERIES - default y - help - Select this option to enable processor idle state management - through cpuidle subsystem. diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index fbccac9cd2d..03480796af9 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o obj-$(CONFIG_CMM) += cmm.o obj-$(CONFIG_DTL) += dtl.o obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o -obj-$(CONFIG_PSERIES_IDLE) += processor_idle.o obj-$(CONFIG_LPARCFG) += lparcfg.o ifeq ($(CONFIG_PPC_PSERIES),y) diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index 1e561bef459..2d8bf15879f 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -25,7 +25,6 @@ #include <linux/errno.h> #include <linux/fs.h> #include <linux/gfp.h> -#include <linux/init.h> #include <linux/kthread.h> #include <linux/module.h> #include <linux/oom.h> diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index 5db66f1fbc2..7d61498e45c 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -20,7 +20,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/init.h> #include <linux/slab.h> #include <linux/debugfs.h> #include <linux/spinlock.h> diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index ccb633e077b..8a8f0472d98 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -265,7 +265,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag) enable = 1; if (enable) { - eeh_subsystem_enabled = 1; + eeh_set_enable(true); eeh_add_to_parent_pe(edev); pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n", @@ -689,7 +689,9 @@ static struct eeh_ops pseries_eeh_ops = { .get_log = pseries_eeh_get_log, .configure_bridge = pseries_eeh_configure_bridge, .read_config = pseries_eeh_read_config, - .write_config = pseries_eeh_write_config + .write_config = pseries_eeh_write_config, + .next_error = NULL, + .restore_config = NULL }; /** diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index 82789e79e53..0ea99e3d481 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -35,12 +35,7 @@ #include "offline_states.h" /* This version can't take the spinlock, because it never returns */ -static struct rtas_args rtas_stop_self_args = { - .token = RTAS_UNKNOWN_SERVICE, - .nargs = 0, - .nret = 1, - .rets = &rtas_stop_self_args.args[0], -}; +static int rtas_stop_self_token = RTAS_UNKNOWN_SERVICE; static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) = CPU_STATE_OFFLINE; @@ -93,15 +88,20 @@ void set_default_offline_state(int cpu) static void rtas_stop_self(void) { - struct rtas_args *args = &rtas_stop_self_args; + struct rtas_args args = { + .token = cpu_to_be32(rtas_stop_self_token), + .nargs = 0, + .nret = 1, + .rets = &args.args[0], + }; local_irq_disable(); - BUG_ON(args->token == RTAS_UNKNOWN_SERVICE); + BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE); printk("cpu %u (hwid %u) Ready to die...\n", smp_processor_id(), hard_smp_processor_id()); - enter_rtas(__pa(args)); + enter_rtas(__pa(&args)); panic("Alas, I survived.\n"); } @@ -392,10 +392,10 @@ static int __init pseries_cpu_hotplug_init(void) } } - rtas_stop_self_args.token = rtas_token("stop-self"); + rtas_stop_self_token = rtas_token("stop-self"); qcss_tok = rtas_token("query-cpu-stopped-state"); - if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE || + if (rtas_stop_self_token == RTAS_UNKNOWN_SERVICE || qcss_tok == RTAS_UNKNOWN_SERVICE) { printk(KERN_INFO "CPU Hotplug not supported by firmware " "- disabling.\n"); diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index f253361552a..33b552ffbe5 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -486,9 +486,10 @@ static void iommu_table_setparms(struct pci_controller *phb, memset((void *)tbl->it_base, 0, *sizep); tbl->it_busno = phb->bus->number; + tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; /* Units of tce entries */ - tbl->it_offset = phb->dma_window_base_cur >> IOMMU_PAGE_SHIFT; + tbl->it_offset = phb->dma_window_base_cur >> tbl->it_page_shift; /* Test if we are going over 2GB of DMA space */ if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) { @@ -499,7 +500,7 @@ static void iommu_table_setparms(struct pci_controller *phb, phb->dma_window_base_cur += phb->dma_window_size; /* Set the tce table size - measured in entries */ - tbl->it_size = phb->dma_window_size >> IOMMU_PAGE_SHIFT; + tbl->it_size = phb->dma_window_size >> tbl->it_page_shift; tbl->it_index = 0; tbl->it_blocksize = 16; @@ -537,11 +538,12 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb, of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size); tbl->it_busno = phb->bus->number; + tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; tbl->it_base = 0; tbl->it_blocksize = 16; tbl->it_type = TCE_PCI; - tbl->it_offset = offset >> IOMMU_PAGE_SHIFT; - tbl->it_size = size >> IOMMU_PAGE_SHIFT; + tbl->it_offset = offset >> tbl->it_page_shift; + tbl->it_size = size >> tbl->it_page_shift; } static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) @@ -687,7 +689,8 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) iommu_table_setparms(phb, dn, tbl); PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node); iommu_register_group(tbl, pci_domain_nr(phb->bus), 0); - set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table); + set_iommu_table_base_and_group(&dev->dev, + PCI_DN(dn)->iommu_table); return; } @@ -699,7 +702,8 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) dn = dn->parent; if (dn && PCI_DN(dn)) - set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table); + set_iommu_table_base_and_group(&dev->dev, + PCI_DN(dn)->iommu_table); else printk(KERN_WARNING "iommu: Device %s has no iommu table\n", pci_name(dev)); @@ -717,21 +721,6 @@ static int __init disable_ddw_setup(char *str) early_param("disable_ddw", disable_ddw_setup); -static inline void __remove_ddw(struct device_node *np, const u32 *ddw_avail, u64 liobn) -{ - int ret; - - ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn); - if (ret) - pr_warning("%s: failed to remove DMA window: rtas returned " - "%d to ibm,remove-pe-dma-window(%x) %llx\n", - np->full_name, ret, ddw_avail[2], liobn); - else - pr_debug("%s: successfully removed DMA window: rtas returned " - "%d to ibm,remove-pe-dma-window(%x) %llx\n", - np->full_name, ret, ddw_avail[2], liobn); -} - static void remove_ddw(struct device_node *np) { struct dynamic_dma_window_prop *dwp; @@ -761,7 +750,15 @@ static void remove_ddw(struct device_node *np) pr_debug("%s successfully cleared tces in window.\n", np->full_name); - __remove_ddw(np, ddw_avail, liobn); + ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn); + if (ret) + pr_warning("%s: failed to remove direct window: rtas returned " + "%d to ibm,remove-pe-dma-window(%x) %llx\n", + np->full_name, ret, ddw_avail[2], liobn); + else + pr_debug("%s: successfully removed direct window: rtas returned " + "%d to ibm,remove-pe-dma-window(%x) %llx\n", + np->full_name, ret, ddw_avail[2], liobn); delprop: ret = of_remove_property(np, win64); @@ -790,68 +787,33 @@ static u64 find_existing_ddw(struct device_node *pdn) return dma_addr; } -static void __restore_default_window(struct eeh_dev *edev, - u32 ddw_restore_token) -{ - u32 cfg_addr; - u64 buid; - int ret; - - /* - * Get the config address and phb buid of the PE window. - * Rely on eeh to retrieve this for us. - * Retrieve them from the pci device, not the node with the - * dma-window property - */ - cfg_addr = edev->config_addr; - if (edev->pe_config_addr) - cfg_addr = edev->pe_config_addr; - buid = edev->phb->buid; - - do { - ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr, - BUID_HI(buid), BUID_LO(buid)); - } while (rtas_busy_delay(ret)); - pr_info("ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n", - ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret); -} - static int find_existing_ddw_windows(void) { + int len; struct device_node *pdn; + struct direct_window *window; const struct dynamic_dma_window_prop *direct64; - const u32 *ddw_extensions; if (!firmware_has_feature(FW_FEATURE_LPAR)) return 0; for_each_node_with_property(pdn, DIRECT64_PROPNAME) { - direct64 = of_get_property(pdn, DIRECT64_PROPNAME, NULL); + direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len); if (!direct64) continue; - /* - * We need to ensure the IOMMU table is active when we - * return from the IOMMU setup so that the common code - * can clear the table or find the holes. To that end, - * first, remove any existing DDW configuration. - */ - remove_ddw(pdn); + window = kzalloc(sizeof(*window), GFP_KERNEL); + if (!window || len < sizeof(struct dynamic_dma_window_prop)) { + kfree(window); + remove_ddw(pdn); + continue; + } - /* - * Second, if we are running on a new enough level of - * firmware where the restore API is present, use it to - * restore the 32-bit window, which was removed in - * create_ddw. - * If the API is not present, then create_ddw couldn't - * have removed the 32-bit window in the first place, so - * removing the DDW configuration should be sufficient. - */ - ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", - NULL); - if (ddw_extensions && ddw_extensions[0] > 0) - __restore_default_window(of_node_to_eeh_dev(pdn), - ddw_extensions[1]); + window->device = pdn; + window->prop = direct64; + spin_lock(&direct_window_list_lock); + list_add(&window->list, &direct_window_list); + spin_unlock(&direct_window_list_lock); } return 0; @@ -921,12 +883,6 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail, return ret; } -static void restore_default_window(struct pci_dev *dev, - u32 ddw_restore_token) -{ - __restore_default_window(pci_dev_to_eeh_dev(dev), ddw_restore_token); -} - struct failed_ddw_pdn { struct device_node *pdn; struct list_head list; @@ -954,13 +910,9 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) u64 dma_addr, max_addr; struct device_node *dn; const u32 *uninitialized_var(ddw_avail); - const u32 *uninitialized_var(ddw_extensions); - u32 ddw_restore_token = 0; struct direct_window *window; struct property *win64; struct dynamic_dma_window_prop *ddwprop; - const void *dma_window = NULL; - unsigned long liobn, offset, size; struct failed_ddw_pdn *fpdn; mutex_lock(&direct_window_init_mutex); @@ -991,42 +943,9 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) */ ddw_avail = of_get_property(pdn, "ibm,ddw-applicable", &len); if (!ddw_avail || len < 3 * sizeof(u32)) - goto out_unlock; - - /* - * the extensions property is only required to exist in certain - * levels of firmware and later - * the ibm,ddw-extensions property is a list with the first - * element containing the number of extensions and each - * subsequent entry is a value corresponding to that extension - */ - ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", &len); - if (ddw_extensions) { - /* - * each new defined extension length should be added to - * the top of the switch so the "earlier" entries also - * get picked up - */ - switch (ddw_extensions[0]) { - /* ibm,reset-pe-dma-windows */ - case 1: - ddw_restore_token = ddw_extensions[1]; - break; - } - } - - /* - * Only remove the existing DMA window if we can restore back to - * the default state. Removing the existing window maximizes the - * resources available to firmware for dynamic window creation. - */ - if (ddw_restore_token) { - dma_window = of_get_property(pdn, "ibm,dma-window", NULL); - of_parse_dma_window(pdn, dma_window, &liobn, &offset, &size); - __remove_ddw(pdn, ddw_avail, liobn); - } + goto out_failed; - /* + /* * Query if there is a second window of size to map the * whole partition. Query returns number of windows, largest * block assigned to PE (partition endpoint), and two bitmasks @@ -1035,7 +954,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) dn = pci_device_to_OF_node(dev); ret = query_ddw(dev, ddw_avail, &query); if (ret != 0) - goto out_restore_window; + goto out_failed; if (query.windows_available == 0) { /* @@ -1044,7 +963,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) * trading in for a larger page size. */ dev_dbg(&dev->dev, "no free dynamic windows"); - goto out_restore_window; + goto out_failed; } if (be32_to_cpu(query.page_size) & 4) { page_shift = 24; /* 16MB */ @@ -1055,7 +974,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) } else { dev_dbg(&dev->dev, "no supported direct page size in mask %x", query.page_size); - goto out_restore_window; + goto out_failed; } /* verify the window * number of ptes will map the partition */ /* check largest block * page size > max memory hotplug addr */ @@ -1064,14 +983,14 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) dev_dbg(&dev->dev, "can't map partiton max 0x%llx with %u " "%llu-sized pages\n", max_addr, query.largest_available_block, 1ULL << page_shift); - goto out_restore_window; + goto out_failed; } len = order_base_2(max_addr); win64 = kzalloc(sizeof(struct property), GFP_KERNEL); if (!win64) { dev_info(&dev->dev, "couldn't allocate property for 64bit dma window\n"); - goto out_restore_window; + goto out_failed; } win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL); win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL); @@ -1133,9 +1052,7 @@ out_free_prop: kfree(win64->value); kfree(win64); -out_restore_window: - if (ddw_restore_token) - restore_default_window(dev, ddw_restore_token); +out_failed: fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL); if (!fpdn) @@ -1193,7 +1110,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) pr_debug(" found DMA window, table: %p\n", pci->iommu_table); } - set_iommu_table_base(&dev->dev, pci->iommu_table); + set_iommu_table_base_and_group(&dev->dev, pci->iommu_table); } static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask) diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 4fca3def9db..b02af9ef3ff 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -92,7 +92,7 @@ void vpa_init(int cpu) * PAPR says this feature is SLB-Buffer but firmware never * reports that. All SPLPAR support SLB shadow buffer. */ - addr = __pa(&slb_shadow[cpu]); + addr = __pa(paca[cpu].slb_shadow_ptr); if (firmware_has_feature(FW_FEATURE_SPLPAR)) { ret = register_slb_shadow(hwcpu, addr); if (ret) @@ -153,7 +153,8 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, /* Make pHyp happy */ if ((rflags & _PAGE_NO_CACHE) && !(rflags & _PAGE_WRITETHRU)) - hpte_r &= ~_PAGE_COHERENT; + hpte_r &= ~HPTE_R_M; + if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N)) flags |= H_COALESCE_CAND; diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 70670a2d9cf..c413ec158ff 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -113,7 +113,8 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) { struct device_node *dn, *pdn; struct pci_bus *bus; - const __be32 *pcie_link_speed_stats; + u32 pcie_link_speed_stats[2]; + int rc; bus = bridge->bus; @@ -122,38 +123,45 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge) return 0; for (pdn = dn; pdn != NULL; pdn = of_get_next_parent(pdn)) { - pcie_link_speed_stats = of_get_property(pdn, - "ibm,pcie-link-speed-stats", NULL); - if (pcie_link_speed_stats) + rc = of_property_read_u32_array(pdn, + "ibm,pcie-link-speed-stats", + &pcie_link_speed_stats[0], 2); + if (!rc) break; } of_node_put(pdn); - if (!pcie_link_speed_stats) { + if (rc) { pr_err("no ibm,pcie-link-speed-stats property\n"); return 0; } - switch (be32_to_cpup(pcie_link_speed_stats)) { + switch (pcie_link_speed_stats[0]) { case 0x01: bus->max_bus_speed = PCIE_SPEED_2_5GT; break; case 0x02: bus->max_bus_speed = PCIE_SPEED_5_0GT; break; + case 0x04: + bus->max_bus_speed = PCIE_SPEED_8_0GT; + break; default: bus->max_bus_speed = PCI_SPEED_UNKNOWN; break; } - switch (be32_to_cpup(pcie_link_speed_stats)) { + switch (pcie_link_speed_stats[1]) { case 0x01: bus->cur_bus_speed = PCIE_SPEED_2_5GT; break; case 0x02: bus->cur_bus_speed = PCIE_SPEED_5_0GT; break; + case 0x04: + bus->cur_bus_speed = PCIE_SPEED_8_0GT; + break; default: bus->cur_bus_speed = PCI_SPEED_UNKNOWN; break; diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c deleted file mode 100644 index a166e38bd68..00000000000 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * processor_idle - idle state cpuidle driver. - * Adapted from drivers/idle/intel_idle.c and - * drivers/acpi/processor_idle.c - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/moduleparam.h> -#include <linux/cpuidle.h> -#include <linux/cpu.h> -#include <linux/notifier.h> - -#include <asm/paca.h> -#include <asm/reg.h> -#include <asm/machdep.h> -#include <asm/firmware.h> -#include <asm/runlatch.h> -#include <asm/plpar_wrappers.h> - -struct cpuidle_driver pseries_idle_driver = { - .name = "pseries_idle", - .owner = THIS_MODULE, -}; - -#define MAX_IDLE_STATE_COUNT 2 - -static int max_idle_state = MAX_IDLE_STATE_COUNT - 1; -static struct cpuidle_device __percpu *pseries_cpuidle_devices; -static struct cpuidle_state *cpuidle_state_table; - -static inline void idle_loop_prolog(unsigned long *in_purr) -{ - *in_purr = mfspr(SPRN_PURR); - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - get_lppaca()->idle = 1; -} - -static inline void idle_loop_epilog(unsigned long in_purr) -{ - u64 wait_cycles; - - wait_cycles = be64_to_cpu(get_lppaca()->wait_state_cycles); - wait_cycles += mfspr(SPRN_PURR) - in_purr; - get_lppaca()->wait_state_cycles = cpu_to_be64(wait_cycles); - get_lppaca()->idle = 0; -} - -static int snooze_loop(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long in_purr; - int cpu = dev->cpu; - - idle_loop_prolog(&in_purr); - local_irq_enable(); - set_thread_flag(TIF_POLLING_NRFLAG); - - while ((!need_resched()) && cpu_online(cpu)) { - ppc64_runlatch_off(); - HMT_low(); - HMT_very_low(); - } - - HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - smp_mb(); - - idle_loop_epilog(in_purr); - - return index; -} - -static void check_and_cede_processor(void) -{ - /* - * Ensure our interrupt state is properly tracked, - * also checks if no interrupt has occurred while we - * were soft-disabled - */ - if (prep_irq_for_idle()) { - cede_processor(); -#ifdef CONFIG_TRACE_IRQFLAGS - /* Ensure that H_CEDE returns with IRQs on */ - if (WARN_ON(!(mfmsr() & MSR_EE))) - __hard_irq_enable(); -#endif - } -} - -static int dedicated_cede_loop(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long in_purr; - - idle_loop_prolog(&in_purr); - get_lppaca()->donate_dedicated_cpu = 1; - - ppc64_runlatch_off(); - HMT_medium(); - check_and_cede_processor(); - - get_lppaca()->donate_dedicated_cpu = 0; - - idle_loop_epilog(in_purr); - - return index; -} - -static int shared_cede_loop(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long in_purr; - - idle_loop_prolog(&in_purr); - - /* - * Yield the processor to the hypervisor. We return if - * an external interrupt occurs (which are driven prior - * to returning here) or if a prod occurs from another - * processor. When returning here, external interrupts - * are enabled. - */ - check_and_cede_processor(); - - idle_loop_epilog(in_purr); - - return index; -} - -/* - * States for dedicated partition case. - */ -static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = { - { /* Snooze */ - .name = "snooze", - .desc = "snooze", - .flags = CPUIDLE_FLAG_TIME_VALID, - .exit_latency = 0, - .target_residency = 0, - .enter = &snooze_loop }, - { /* CEDE */ - .name = "CEDE", - .desc = "CEDE", - .flags = CPUIDLE_FLAG_TIME_VALID, - .exit_latency = 10, - .target_residency = 100, - .enter = &dedicated_cede_loop }, -}; - -/* - * States for shared partition case. - */ -static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = { - { /* Shared Cede */ - .name = "Shared Cede", - .desc = "Shared Cede", - .flags = CPUIDLE_FLAG_TIME_VALID, - .exit_latency = 0, - .target_residency = 0, - .enter = &shared_cede_loop }, -}; - -void update_smt_snooze_delay(int cpu, int residency) -{ - struct cpuidle_driver *drv = cpuidle_get_driver(); - struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu); - - if (cpuidle_state_table != dedicated_states) - return; - - if (residency < 0) { - /* Disable the Nap state on that cpu */ - if (dev) - dev->states_usage[1].disable = 1; - } else - if (drv) - drv->states[1].target_residency = residency; -} - -static int pseries_cpuidle_add_cpu_notifier(struct notifier_block *n, - unsigned long action, void *hcpu) -{ - int hotcpu = (unsigned long)hcpu; - struct cpuidle_device *dev = - per_cpu_ptr(pseries_cpuidle_devices, hotcpu); - - if (dev && cpuidle_get_driver()) { - switch (action) { - case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - cpuidle_pause_and_lock(); - cpuidle_enable_device(dev); - cpuidle_resume_and_unlock(); - break; - - case CPU_DEAD: - case CPU_DEAD_FROZEN: - cpuidle_pause_and_lock(); - cpuidle_disable_device(dev); - cpuidle_resume_and_unlock(); - break; - - default: - return NOTIFY_DONE; - } - } - return NOTIFY_OK; -} - -static struct notifier_block setup_hotplug_notifier = { - .notifier_call = pseries_cpuidle_add_cpu_notifier, -}; - -/* - * pseries_cpuidle_driver_init() - */ -static int pseries_cpuidle_driver_init(void) -{ - int idle_state; - struct cpuidle_driver *drv = &pseries_idle_driver; - - drv->state_count = 0; - - for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) { - - if (idle_state > max_idle_state) - break; - - /* is the state not enabled? */ - if (cpuidle_state_table[idle_state].enter == NULL) - continue; - - drv->states[drv->state_count] = /* structure copy */ - cpuidle_state_table[idle_state]; - - drv->state_count += 1; - } - - return 0; -} - -/* pseries_idle_devices_uninit(void) - * unregister cpuidle devices and de-allocate memory - */ -static void pseries_idle_devices_uninit(void) -{ - int i; - struct cpuidle_device *dev; - - for_each_possible_cpu(i) { - dev = per_cpu_ptr(pseries_cpuidle_devices, i); - cpuidle_unregister_device(dev); - } - - free_percpu(pseries_cpuidle_devices); - return; -} - -/* pseries_idle_devices_init() - * allocate, initialize and register cpuidle device - */ -static int pseries_idle_devices_init(void) -{ - int i; - struct cpuidle_driver *drv = &pseries_idle_driver; - struct cpuidle_device *dev; - - pseries_cpuidle_devices = alloc_percpu(struct cpuidle_device); - if (pseries_cpuidle_devices == NULL) - return -ENOMEM; - - for_each_possible_cpu(i) { - dev = per_cpu_ptr(pseries_cpuidle_devices, i); - dev->state_count = drv->state_count; - dev->cpu = i; - if (cpuidle_register_device(dev)) { - printk(KERN_DEBUG \ - "cpuidle_register_device %d failed!\n", i); - return -EIO; - } - } - - return 0; -} - -/* - * pseries_idle_probe() - * Choose state table for shared versus dedicated partition - */ -static int pseries_idle_probe(void) -{ - - if (!firmware_has_feature(FW_FEATURE_SPLPAR)) - return -ENODEV; - - if (cpuidle_disable != IDLE_NO_OVERRIDE) - return -ENODEV; - - if (max_idle_state == 0) { - printk(KERN_DEBUG "pseries processor idle disabled.\n"); - return -EPERM; - } - - if (lppaca_shared_proc(get_lppaca())) - cpuidle_state_table = shared_states; - else - cpuidle_state_table = dedicated_states; - - return 0; -} - -static int __init pseries_processor_idle_init(void) -{ - int retval; - - retval = pseries_idle_probe(); - if (retval) - return retval; - - pseries_cpuidle_driver_init(); - retval = cpuidle_register_driver(&pseries_idle_driver); - if (retval) { - printk(KERN_DEBUG "Registration of pseries driver failed.\n"); - return retval; - } - - retval = pseries_idle_devices_init(); - if (retval) { - pseries_idle_devices_uninit(); - cpuidle_unregister_driver(&pseries_idle_driver); - return retval; - } - - register_cpu_notifier(&setup_hotplug_notifier); - printk(KERN_DEBUG "pseries_idle_driver registered\n"); - - return 0; -} - -static void __exit pseries_processor_idle_exit(void) -{ - - unregister_cpu_notifier(&setup_hotplug_notifier); - pseries_idle_devices_uninit(); - cpuidle_unregister_driver(&pseries_idle_driver); - - return; -} - -module_init(pseries_processor_idle_init); -module_exit(pseries_processor_idle_exit); - -MODULE_AUTHOR("Deepthi Dharwar <deepthi@linux.vnet.ibm.com>"); -MODULE_DESCRIPTION("Cpuidle driver for POWER"); -MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 6f76ae417f4..972df0ffd4d 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -72,7 +72,7 @@ int CMO_PrPSP = -1; int CMO_SecPSP = -1; -unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT); +unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K); EXPORT_SYMBOL(CMO_PageSize); int fwnmi_active; /* TRUE if an FWNMI handler is present */ @@ -430,8 +430,7 @@ static void pSeries_machine_kexec(struct kimage *image) { long rc; - if (firmware_has_feature(FW_FEATURE_SET_MODE) && - (image->type != KEXEC_TYPE_CRASH)) { + if (firmware_has_feature(FW_FEATURE_SET_MODE)) { rc = pSeries_disable_reloc_on_exc(); if (rc != H_SUCCESS) pr_warning("Warning: Failed to disable relocation on " @@ -569,7 +568,7 @@ void pSeries_cmo_feature_init(void) { char *ptr, *key, *value, *end; int call_status; - int page_order = IOMMU_PAGE_SHIFT; + int page_order = IOMMU_PAGE_SHIFT_4K; pr_debug(" -> fw_cmo_feature_init()\n"); spin_lock(&rtas_data_buf_lock); diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c index 62cb527493e..9a15e5b39bb 100644 --- a/arch/powerpc/platforms/wsp/wsp_pci.c +++ b/arch/powerpc/platforms/wsp/wsp_pci.c @@ -260,7 +260,7 @@ static int tce_build_wsp(struct iommu_table *tbl, long index, long npages, *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n", - tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT); + tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT_4K); uaddr += TCE_PAGE_SIZE; index++; @@ -381,8 +381,9 @@ static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb, /* Init bits and pieces */ tbl->table.it_blocksize = 16; - tbl->table.it_offset = addr >> IOMMU_PAGE_SHIFT; - tbl->table.it_size = size >> IOMMU_PAGE_SHIFT; + tbl->table.it_page_shift = IOMMU_PAGE_SHIFT_4K; + tbl->table.it_offset = addr >> tbl->table.it_page_shift; + tbl->table.it_size = size >> tbl->table.it_page_shift; /* * It's already blank but we clear it anyway. @@ -449,8 +450,8 @@ static void wsp_pci_dma_dev_setup(struct pci_dev *pdev) if (table) { pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n", pci_name(pdev), - table->table.it_offset << IOMMU_PAGE_SHIFT, - (table->table.it_offset << IOMMU_PAGE_SHIFT) + table->table.it_offset << IOMMU_PAGE_SHIFT_4K, + (table->table.it_offset << IOMMU_PAGE_SHIFT_4K) + phb->dma32_region_size - 1); archdata->dma_data.iommu_table_base = &table->table; return; diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index 13ec968be4c..7baa70d6dc0 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -19,7 +19,7 @@ config PPC_MSI_BITMAP default y if MPIC default y if FSL_PCI default y if PPC4xx_MSI - default y if POWERNV_MSI + default y if PPC_POWERNV source "arch/powerpc/sysdev/xics/Kconfig" diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index 1c16141c031..47b6b9f81d4 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -109,27 +109,28 @@ axon_ram_make_request(struct request_queue *queue, struct bio *bio) struct axon_ram_bank *bank = bio->bi_bdev->bd_disk->private_data; unsigned long phys_mem, phys_end; void *user_mem; - struct bio_vec *vec; + struct bio_vec vec; unsigned int transfered; - unsigned short idx; + struct bvec_iter iter; - phys_mem = bank->io_addr + (bio->bi_sector << AXON_RAM_SECTOR_SHIFT); + phys_mem = bank->io_addr + (bio->bi_iter.bi_sector << + AXON_RAM_SECTOR_SHIFT); phys_end = bank->io_addr + bank->size; transfered = 0; - bio_for_each_segment(vec, bio, idx) { - if (unlikely(phys_mem + vec->bv_len > phys_end)) { + bio_for_each_segment(vec, bio, iter) { + if (unlikely(phys_mem + vec.bv_len > phys_end)) { bio_io_error(bio); return; } - user_mem = page_address(vec->bv_page) + vec->bv_offset; + user_mem = page_address(vec.bv_page) + vec.bv_offset; if (bio_data_dir(bio) == READ) - memcpy(user_mem, (void *) phys_mem, vec->bv_len); + memcpy(user_mem, (void *) phys_mem, vec.bv_len); else - memcpy((void *) phys_mem, user_mem, vec->bv_len); + memcpy((void *) phys_mem, user_mem, vec.bv_len); - phys_mem += vec->bv_len; - transfered += vec->bv_len; + phys_mem += vec.bv_len; + transfered += vec.bv_len; } bio_endio(bio, 0); } diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index 10386b676d8..a11bd1d433a 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -27,7 +27,6 @@ */ #include <linux/stddef.h> -#include <linux/init.h> #include <linux/sched.h> #include <linux/signal.h> #include <linux/irq.h> diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index bd968a43a48..62c47bb7651 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -292,6 +292,7 @@ static void iommu_table_dart_setup(void) iommu_table_dart.it_offset = 0; /* it_size is in number of entries */ iommu_table_dart.it_size = dart_tablesize / sizeof(u32); + iommu_table_dart.it_page_shift = IOMMU_PAGE_SHIFT_4K; /* Initialize the common IOMMU code */ iommu_table_dart.it_base = (unsigned long)dart_vbase; diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/arch/powerpc/sysdev/fsl_ifc.c index d7fc7223914..fbc885b3194 100644 --- a/arch/powerpc/sysdev/fsl_ifc.c +++ b/arch/powerpc/sysdev/fsl_ifc.c @@ -19,7 +19,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/compiler.h> diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 6bc5a546d49..d631022ffb4 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -214,10 +214,14 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data) struct fsl_lbc_ctrl *ctrl = data; struct fsl_lbc_regs __iomem *lbc = ctrl->regs; u32 status; + unsigned long flags; + spin_lock_irqsave(&fsl_lbc_lock, flags); status = in_be32(&lbc->ltesr); - if (!status) + if (!status) { + spin_unlock_irqrestore(&fsl_lbc_lock, flags); return IRQ_NONE; + } out_be32(&lbc->ltesr, LTESR_CLEAR); out_be32(&lbc->lteatr, 0); @@ -260,6 +264,7 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data) if (status & ~LTESR_MASK) dev_err(ctrl->dev, "Unknown error: " "LTESR 0x%08X\n", status); + spin_unlock_irqrestore(&fsl_lbc_lock, flags); return IRQ_HANDLED; } @@ -298,8 +303,8 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev) goto err; } - fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0); - if (fsl_lbc_ctrl_dev->irq == NO_IRQ) { + fsl_lbc_ctrl_dev->irq[0] = irq_of_parse_and_map(dev->dev.of_node, 0); + if (!fsl_lbc_ctrl_dev->irq[0]) { dev_err(&dev->dev, "failed to get irq resource\n"); ret = -ENODEV; goto err; @@ -311,20 +316,34 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev) if (ret < 0) goto err; - ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0, + ret = request_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_irq, 0, "fsl-lbc", fsl_lbc_ctrl_dev); if (ret != 0) { dev_err(&dev->dev, "failed to install irq (%d)\n", - fsl_lbc_ctrl_dev->irq); - ret = fsl_lbc_ctrl_dev->irq; + fsl_lbc_ctrl_dev->irq[0]); + ret = fsl_lbc_ctrl_dev->irq[0]; goto err; } + fsl_lbc_ctrl_dev->irq[1] = irq_of_parse_and_map(dev->dev.of_node, 1); + if (fsl_lbc_ctrl_dev->irq[1]) { + ret = request_irq(fsl_lbc_ctrl_dev->irq[1], fsl_lbc_ctrl_irq, + IRQF_SHARED, "fsl-lbc-err", fsl_lbc_ctrl_dev); + if (ret) { + dev_err(&dev->dev, "failed to install irq (%d)\n", + fsl_lbc_ctrl_dev->irq[1]); + ret = fsl_lbc_ctrl_dev->irq[1]; + goto err1; + } + } + /* Enable interrupts for any detected events */ out_be32(&fsl_lbc_ctrl_dev->regs->lteir, LTEIR_ENABLE); return 0; +err1: + free_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_dev); err: iounmap(fsl_lbc_ctrl_dev->regs); kfree(fsl_lbc_ctrl_dev); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 4dfd61df8ab..a625dcf26b2 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -122,7 +122,7 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) * address width of the SoC such that we can address any internal * SoC address from across PCI if needed */ - if ((dev->bus == &pci_bus_type) && + if ((dev_is_pci(dev)) && dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) { set_dma_ops(dev, &dma_direct_ops); set_dma_offset(dev, pci64_dma_offset); @@ -454,7 +454,7 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus) } } -int __init fsl_add_bridge(struct platform_device *pdev, int is_primary) +int fsl_add_bridge(struct platform_device *pdev, int is_primary) { int len; struct pci_controller *hose; @@ -1035,6 +1035,7 @@ static const struct of_device_id pci_ids[] = { { .compatible = "fsl,mpc8548-pcie", }, { .compatible = "fsl,mpc8610-pci", }, { .compatible = "fsl,mpc8641-pcie", }, + { .compatible = "fsl,qoriq-pcie", }, { .compatible = "fsl,qoriq-pcie-v2.1", }, { .compatible = "fsl,qoriq-pcie-v2.2", }, { .compatible = "fsl,qoriq-pcie-v2.3", }, diff --git a/arch/powerpc/sysdev/ge/ge_pic.h b/arch/powerpc/sysdev/ge/ge_pic.h index 6149916da3f..908dbd9826b 100644 --- a/arch/powerpc/sysdev/ge/ge_pic.h +++ b/arch/powerpc/sysdev/ge/ge_pic.h @@ -1,7 +1,6 @@ #ifndef __GEF_PIC_H__ #define __GEF_PIC_H__ -#include <linux/init.h> void gef_pic_cascade(unsigned int, struct irq_desc *); unsigned int gef_pic_get_irq(void); diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 997df6a7ab5..45598da0b32 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -8,7 +8,6 @@ */ #undef DEBUG -#include <linux/init.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/kernel.h> diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c index c6c8b526a4f..1f6c570d66d 100644 --- a/arch/powerpc/sysdev/indirect_pci.c +++ b/arch/powerpc/sysdev/indirect_pci.c @@ -152,10 +152,8 @@ static struct pci_ops indirect_pci_ops = .write = indirect_write_config, }; -void __init -setup_indirect_pci(struct pci_controller* hose, - resource_size_t cfg_addr, - resource_size_t cfg_data, u32 flags) +void setup_indirect_pci(struct pci_controller *hose, resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags) { resource_size_t base = cfg_addr & PAGE_MASK; void __iomem *mbase; diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c index b724622c3a0..c4828c0be5b 100644 --- a/arch/powerpc/sysdev/mpc8xx_pic.c +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -1,6 +1,5 @@ #include <linux/kernel.h> #include <linux/stddef.h> -#include <linux/init.h> #include <linux/sched.h> #include <linux/signal.h> #include <linux/irq.h> diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0e166ed4cd1..8209744b282 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -886,25 +886,25 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) /* Default: read HW settings */ if (flow_type == IRQ_TYPE_DEFAULT) { - switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | - MPIC_INFO(VECPRI_SENSE_MASK))) { - case MPIC_INFO(VECPRI_SENSE_EDGE) | - MPIC_INFO(VECPRI_POLARITY_POSITIVE): - flow_type = IRQ_TYPE_EDGE_RISING; - break; - case MPIC_INFO(VECPRI_SENSE_EDGE) | - MPIC_INFO(VECPRI_POLARITY_NEGATIVE): - flow_type = IRQ_TYPE_EDGE_FALLING; - break; - case MPIC_INFO(VECPRI_SENSE_LEVEL) | - MPIC_INFO(VECPRI_POLARITY_POSITIVE): - flow_type = IRQ_TYPE_LEVEL_HIGH; - break; - case MPIC_INFO(VECPRI_SENSE_LEVEL) | - MPIC_INFO(VECPRI_POLARITY_NEGATIVE): - flow_type = IRQ_TYPE_LEVEL_LOW; - break; - } + int vold_ps; + + vold_ps = vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK)); + + if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE))) + flow_type = IRQ_TYPE_EDGE_RISING; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE))) + flow_type = IRQ_TYPE_EDGE_FALLING; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE))) + flow_type = IRQ_TYPE_LEVEL_HIGH; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE))) + flow_type = IRQ_TYPE_LEVEL_LOW; + else + WARN_ONCE(1, "mpic: unknown IRQ type %d\n", vold); } /* Apply to irq desc */ diff --git a/arch/powerpc/sysdev/mpic_timer.c b/arch/powerpc/sysdev/mpic_timer.c index 22d7d57eead..9d9b06217f8 100644 --- a/arch/powerpc/sysdev/mpic_timer.c +++ b/arch/powerpc/sysdev/mpic_timer.c @@ -41,6 +41,7 @@ #define MPIC_TIMER_TCR_ROVR_OFFSET 24 #define TIMER_STOP 0x80000000 +#define GTCCR_TOG 0x80000000 #define TIMERS_PER_GROUP 4 #define MAX_TICKS (~0U >> 1) #define MAX_TICKS_CASCADE (~0U) @@ -96,8 +97,11 @@ static void convert_ticks_to_time(struct timer_group_priv *priv, time->tv_sec = (__kernel_time_t)div_u64(ticks, priv->timerfreq); tmp_sec = (u64)time->tv_sec * (u64)priv->timerfreq; - time->tv_usec = (__kernel_suseconds_t) - div_u64((ticks - tmp_sec) * 1000000, priv->timerfreq); + time->tv_usec = 0; + + if (tmp_sec <= ticks) + time->tv_usec = (__kernel_suseconds_t) + div_u64((ticks - tmp_sec) * 1000000, priv->timerfreq); return; } @@ -327,11 +331,13 @@ void mpic_get_remain_time(struct mpic_timer *handle, struct timeval *time) casc_priv = priv->timer[handle->num].cascade_handle; if (casc_priv) { tmp_ticks = in_be32(&priv->regs[handle->num].gtccr); + tmp_ticks &= ~GTCCR_TOG; ticks = ((u64)tmp_ticks & UINT_MAX) * (u64)MAX_TICKS_CASCADE; tmp_ticks = in_be32(&priv->regs[handle->num - 1].gtccr); ticks += tmp_ticks; } else { ticks = in_be32(&priv->regs[handle->num].gtccr); + ticks &= ~GTCCR_TOG; } convert_ticks_to_time(priv, ticks, time); diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c index a3a8fad8537..c2dba7db71a 100644 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -448,7 +448,7 @@ static int __init mv64x60_device_setup(void) int err; id = 0; - for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") { + for_each_compatible_node(np, NULL, "marvell,mv64360-mpsc") { err = mv64x60_mpsc_device_setup(np, id++); if (err) printk(KERN_ERR "Failed to initialize MV64x60 " diff --git a/arch/powerpc/sysdev/mv64x60_udbg.c b/arch/powerpc/sysdev/mv64x60_udbg.c index 50a81387e9b..3b8734b870e 100644 --- a/arch/powerpc/sysdev/mv64x60_udbg.c +++ b/arch/powerpc/sysdev/mv64x60_udbg.c @@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void) if (!stdout) return; - for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") { + for_each_compatible_node(np, NULL, "marvell,mv64360-mpsc") { if (np == stdout) break; } diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c index a88807b3dd5..d09994164da 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_io.c +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -16,7 +16,6 @@ #include <linux/stddef.h> #include <linux/kernel.h> -#include <linux/init.h> #include <linux/errno.h> #include <linux/module.h> #include <linux/ioport.h> diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c index 134b07d2943..621575b7e84 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc.c +++ b/arch/powerpc/sysdev/qe_lib/ucc.c @@ -14,7 +14,6 @@ * option) any later version. */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/errno.h> #include <linux/stddef.h> #include <linux/spinlock.h> diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index cceb2e36673..65aaf15032a 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -13,7 +13,6 @@ * option) any later version. */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/stddef.h> diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 1c062f48f1a..befaf1123f7 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -13,7 +13,6 @@ * option) any later version. */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/errno.h> #include <linux/slab.h> #include <linux/stddef.h> diff --git a/arch/powerpc/sysdev/udbg_memcons.c b/arch/powerpc/sysdev/udbg_memcons.c index ce5a7b489e4..9998c0de12d 100644 --- a/arch/powerpc/sysdev/udbg_memcons.c +++ b/arch/powerpc/sysdev/udbg_memcons.c @@ -18,7 +18,6 @@ * 2 of the License, or (at your option) any later version. */ -#include <linux/init.h> #include <linux/kernel.h> #include <asm/barrier.h> #include <asm/page.h> diff --git a/arch/powerpc/sysdev/xics/icp-hv.c b/arch/powerpc/sysdev/xics/icp-hv.c index df0fc582146..c1917cf67c3 100644 --- a/arch/powerpc/sysdev/xics/icp-hv.c +++ b/arch/powerpc/sysdev/xics/icp-hv.c @@ -12,7 +12,6 @@ #include <linux/irq.h> #include <linux/smp.h> #include <linux/interrupt.h> -#include <linux/init.h> #include <linux/cpu.h> #include <linux/of.h> diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index af9d3469fb9..b07909850f7 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -309,16 +309,23 @@ static void get_output_lock(void) if (xmon_speaker == me) return; + for (;;) { - if (xmon_speaker == 0) { - last_speaker = cmpxchg(&xmon_speaker, 0, me); - if (last_speaker == 0) - return; - } - timeout = 10000000; + last_speaker = cmpxchg(&xmon_speaker, 0, me); + if (last_speaker == 0) + return; + + /* + * Wait a full second for the lock, we might be on a slow + * console, but check every 100us. + */ + timeout = 10000; while (xmon_speaker == last_speaker) { - if (--timeout > 0) + if (--timeout > 0) { + udelay(100); continue; + } + /* hostile takeover */ prev = cmpxchg(&xmon_speaker, last_speaker, me); if (prev == last_speaker) @@ -397,7 +404,6 @@ static int xmon_core(struct pt_regs *regs, int fromipi) } xmon_fault_jmp[cpu] = recurse_jmp; - cpumask_set_cpu(cpu, &cpus_in_xmon); bp = NULL; if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) @@ -419,6 +425,8 @@ static int xmon_core(struct pt_regs *regs, int fromipi) release_output_lock(); } + cpumask_set_cpu(cpu, &cpus_in_xmon); + waiting: secondary = 1; while (secondary && !xmon_gate) { @@ -2051,6 +2059,10 @@ static void dump_one_paca(int cpu) DUMP(p, stab_addr, "lx"); #endif DUMP(p, emergency_sp, "p"); +#ifdef CONFIG_PPC_BOOK3S_64 + DUMP(p, mc_emergency_sp, "p"); + DUMP(p, in_mce, "x"); +#endif DUMP(p, data_offset, "lx"); DUMP(p, hw_cpu_id, "x"); DUMP(p, cpu_start, "x"); |