diff options
Diffstat (limited to 'arch/powerpc')
29 files changed, 876 insertions, 329 deletions
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index fe22e54ab2b..dbe421dc3c1 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -55,6 +56,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -69,10 +71,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -84,7 +82,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -93,6 +90,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -126,6 +124,7 @@ CONFIG_RTAS_FLASH=y CONFIG_MMIO_NVRAM=y CONFIG_CELL_IIC=y # CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set @@ -167,7 +166,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -184,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -226,6 +223,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -242,6 +240,7 @@ CONFIG_IPV6=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y @@ -632,6 +631,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -717,7 +717,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -736,9 +735,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -766,10 +763,6 @@ CONFIG_I2C_ALGOBIT=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -818,6 +811,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # CONFIG_INFINIBAND=y @@ -834,6 +840,11 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # # +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -889,7 +900,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 2c3fd200767..a45627547d0 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Fri Feb 10 17:33:08 2006 +# Linux kernel version: 2.6.17-rc1 +# Wed Apr 19 13:24:37 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -29,6 +30,7 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=4 @@ -53,6 +55,7 @@ CONFIG_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -67,10 +70,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -82,7 +81,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -91,6 +89,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -185,7 +184,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -227,6 +225,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -238,6 +237,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -261,6 +262,7 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m # @@ -513,6 +515,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m CONFIG_MD_RAID5=y +# CONFIG_MD_RAID5_RESHAPE is not set CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -761,7 +764,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -772,6 +774,7 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=m +# CONFIG_AGP_VIA is not set CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set CONFIG_RAW_DRIVER=y @@ -813,7 +816,6 @@ CONFIG_I2C_POWERMAC=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -832,9 +834,7 @@ CONFIG_I2C_POWERMAC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -862,10 +862,6 @@ CONFIG_I2C_POWERMAC=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -874,6 +870,7 @@ CONFIG_I2C_POWERMAC=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -883,6 +880,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y +CONFIG_FB_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -901,7 +899,6 @@ CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_DEBUG is not set @@ -958,9 +955,11 @@ CONFIG_SND_SEQUENCER=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -977,6 +976,7 @@ CONFIG_SND_SUPPORT_OLD_API=y # PCI devices # # CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set @@ -1009,6 +1009,7 @@ CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -1041,6 +1042,7 @@ CONFIG_SND_USB_AUDIO=m # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1068,7 +1070,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y @@ -1126,15 +1127,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # CONFIG_USB_CATC=m @@ -1194,6 +1186,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m @@ -1237,17 +1230,23 @@ CONFIG_USB_EZUSB=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# # InfiniBand support # # CONFIG_INFINIBAND is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -# EDAC - error detection and reporting (RAS) +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1319,7 +1318,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 1816a46742f..a95e455a194 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc6 -# Wed Mar 15 16:19:52 2006 +# Linux kernel version: 2.6.17-rc1 +# Wed Apr 19 11:46:44 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -30,6 +31,7 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=32 @@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -165,7 +164,6 @@ CONFIG_GENERIC_ISA_DMA=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -207,6 +205,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -218,6 +217,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -236,11 +237,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m @@ -262,20 +266,19 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m +# CONFIG_IP_NF_MATCH_AH is not set CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_POLICY=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -479,6 +482,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m CONFIG_MD_RAID5=y +# CONFIG_MD_RAID5_RESHAPE is not set CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -702,7 +706,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -751,10 +754,6 @@ CONFIG_MAX_RAW_DEVS=256 # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -779,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256 # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -796,6 +796,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -805,6 +810,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# # File systems # CONFIG_EXT2_FS=y @@ -878,7 +888,6 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index daaf038a1fa..58e68ce09b0 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Fri Feb 10 17:33:32 2006 +# Linux kernel version: 2.6.17-rc1 +# Wed Apr 19 11:48:00 2006 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -30,6 +31,7 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=128 @@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -188,7 +187,6 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y # CONFIG_PCI_DEBUG is not set # @@ -235,6 +233,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y @@ -246,6 +245,8 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -272,6 +273,7 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set CONFIG_IP_NF_QUEUE=m # @@ -519,6 +521,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m CONFIG_MD_RAID5=y +# CONFIG_MD_RAID5_RESHAPE is not set CONFIG_MD_RAID6=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m @@ -750,6 +753,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -767,7 +771,9 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set +CONFIG_HVC_DRIVER=y CONFIG_HVC_CONSOLE=y +# CONFIG_HVC_RTAS is not set CONFIG_HVCS=m # @@ -779,7 +785,6 @@ CONFIG_HVCS=m # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -830,7 +835,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -849,9 +853,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -879,10 +881,6 @@ CONFIG_I2C_ALGOBIT=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -891,6 +889,7 @@ CONFIG_I2C_ALGOBIT=y # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -900,6 +899,7 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y +CONFIG_FB_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -919,7 +919,6 @@ CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y # CONFIG_FB_MATROX_I2C is not set CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_DEBUG is not set @@ -968,6 +967,7 @@ CONFIG_LCD_DEVICE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1048,15 +1048,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1109,6 +1100,11 @@ CONFIG_USB_MON=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# # InfiniBand support # CONFIG_INFINIBAND=m @@ -1121,12 +1117,13 @@ CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_SRP is not set # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -# EDAC - error detection and reporting (RAS) +# Real Time Clock # +# CONFIG_RTC_CLASS is not set # # File systems @@ -1202,7 +1199,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 39e348a3ade..3f7182db9ed 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -57,6 +57,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec); PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) #define COMMON_USER_POWER5_PLUS (COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) +#define COMMON_USER_POWER6 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\ + PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) #define COMMON_USER_BOOKE (PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \ PPC_FEATURE_BOOKE) @@ -263,6 +265,20 @@ struct cpu_spec cpu_specs[] = { .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", }, + { /* Power6 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x003e0000, + .cpu_name = "POWER6", + .cpu_features = CPU_FTRS_POWER6, + .cpu_user_features = COMMON_USER_POWER6, + .icache_bsize = 128, + .dcache_bsize = 128, + .num_pmcs = 6, + .cpu_setup = __setup_cpu_power4, + .oprofile_cpu_type = "ppc64/power6", + .oprofile_type = PPC_OPROFILE_POWER4, + .platform = "power6", + }, { /* Cell Broadband Engine */ .pvr_mask = 0xffff0000, .pvr_value = 0x00700000, diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index d9a7fdef59b..4eba60a3289 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -61,6 +61,7 @@ __setup("iommu=", setup_iommu); static unsigned long iommu_range_alloc(struct iommu_table *tbl, unsigned long npages, unsigned long *handle, + unsigned long mask, unsigned int align_order) { unsigned long n, end, i, start; @@ -97,9 +98,21 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl, */ if (start >= limit) start = largealloc ? tbl->it_largehint : tbl->it_hint; - + again: + if (limit + tbl->it_offset > mask) { + limit = mask - tbl->it_offset + 1; + /* If we're constrained on address range, first try + * at the masked hint to avoid O(n) search complexity, + * but on second pass, start at 0. + */ + if ((start & mask) >= limit || pass > 0) + start = 0; + else + start &= mask; + } + n = find_next_zero_bit(tbl->it_map, limit, start); /* Align allocation */ @@ -150,14 +163,14 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl, static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *page, unsigned int npages, enum dma_data_direction direction, - unsigned int align_order) + unsigned long mask, unsigned int align_order) { unsigned long entry, flags; dma_addr_t ret = DMA_ERROR_CODE; - + spin_lock_irqsave(&(tbl->it_lock), flags); - entry = iommu_range_alloc(tbl, npages, NULL, align_order); + entry = iommu_range_alloc(tbl, npages, NULL, mask, align_order); if (unlikely(entry == DMA_ERROR_CODE)) { spin_unlock_irqrestore(&(tbl->it_lock), flags); @@ -236,7 +249,7 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, int iommu_map_sg(struct device *dev, struct iommu_table *tbl, struct scatterlist *sglist, int nelems, - enum dma_data_direction direction) + unsigned long mask, enum dma_data_direction direction) { dma_addr_t dma_next = 0, dma_addr; unsigned long flags; @@ -274,7 +287,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, vaddr = (unsigned long)page_address(s->page) + s->offset; npages = PAGE_ALIGN(vaddr + slen) - (vaddr & PAGE_MASK); npages >>= PAGE_SHIFT; - entry = iommu_range_alloc(tbl, npages, &handle, 0); + entry = iommu_range_alloc(tbl, npages, &handle, mask >> PAGE_SHIFT, 0); DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen); @@ -479,7 +492,8 @@ void iommu_free_table(struct device_node *dn) * byte within the page as vaddr. */ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, - size_t size, enum dma_data_direction direction) + size_t size, unsigned long mask, + enum dma_data_direction direction) { dma_addr_t dma_handle = DMA_ERROR_CODE; unsigned long uaddr; @@ -492,7 +506,8 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, npages >>= PAGE_SHIFT; if (tbl) { - dma_handle = iommu_alloc(tbl, vaddr, npages, direction, 0); + dma_handle = iommu_alloc(tbl, vaddr, npages, direction, + mask >> PAGE_SHIFT, 0); if (dma_handle == DMA_ERROR_CODE) { if (printk_ratelimit()) { printk(KERN_INFO "iommu_alloc failed, " @@ -521,7 +536,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, * to the dma address (mapping) of the first page. */ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, - dma_addr_t *dma_handle, gfp_t flag) + dma_addr_t *dma_handle, unsigned long mask, gfp_t flag) { void *ret = NULL; dma_addr_t mapping; @@ -551,7 +566,8 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, memset(ret, 0, size); /* Set up tces to cover the allocated range */ - mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, order); + mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, + mask >> PAGE_SHIFT, order); if (mapping == DMA_ERROR_CODE) { free_pages((unsigned long)ret, order); ret = NULL; diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 856ef1a832b..f78866367b7 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -90,15 +90,15 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) { - kprobe_opcode_t insn = *p->ainsn.insn; - regs->msr |= MSR_SE; - /* single step inline if it is a trap variant */ - if (is_trap(insn)) - regs->nip = (unsigned long)p->addr; - else - regs->nip = (unsigned long)p->ainsn.insn; + /* + * On powerpc we should single step on the original + * instruction even if the probed insn is a trap + * variant as values in regs could play a part in + * if the trap is taken or not + */ + regs->nip = (unsigned long)p->ainsn.insn; } static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 928b8581fcb..ba34001fca8 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -191,11 +191,19 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr, (void *)hdr + sechdrs[sechdrs[i].sh_link].sh_offset); } - if (!me->arch.stubs_section || !me->arch.toc_section) { - printk("%s: doesn't contain .toc or .stubs.\n", me->name); + + if (!me->arch.stubs_section) { + printk("%s: doesn't contain .stubs.\n", me->name); return -ENOEXEC; } + /* If we don't have a .toc, just use .stubs. We need to set r2 + to some reasonable value in case the module calls out to + other functions via a stub, or if a function pointer escapes + the module by some means. */ + if (!me->arch.toc_section) + me->arch.toc_section = me->arch.stubs_section; + /* Override the stubs size */ sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); return 0; @@ -342,7 +350,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, break; case R_PPC64_TOC16: - /* Subtact TOC pointer */ + /* Subtract TOC pointer */ value -= my_r2(sechdrs, me); if (value + 0x8000 > 0xffff) { printk("%s: bad TOC16 relocation (%lu)\n", @@ -355,7 +363,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, break; case R_PPC64_TOC16_DS: - /* Subtact TOC pointer */ + /* Subtract TOC pointer */ value -= my_r2(sechdrs, me); if ((value & 3) != 0 || value + 0x8000 > 0xffff) { printk("%s: bad TOC16_DS relocation (%lu)\n", diff --git a/arch/powerpc/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c index c336f3e31cf..c1d95e14bbe 100644 --- a/arch/powerpc/kernel/pci_iommu.c +++ b/arch/powerpc/kernel/pci_iommu.c @@ -59,6 +59,25 @@ static inline struct iommu_table *devnode_table(struct device *dev) } +static inline unsigned long device_to_mask(struct device *hwdev) +{ + struct pci_dev *pdev; + + if (!hwdev) { + pdev = ppc64_isabridge_dev; + if (!pdev) /* This is the best guess we can do */ + return 0xfffffffful; + } else + pdev = to_pci_dev(hwdev); + + if (pdev->dma_mask) + return pdev->dma_mask; + + /* Assume devices without mask can take 32 bit addresses */ + return 0xfffffffful; +} + + /* Allocates a contiguous real buffer and creates mappings over it. * Returns the virtual address of the buffer and sets dma_handle * to the dma address (mapping) of the first page. @@ -67,7 +86,7 @@ static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle, - flag); + device_to_mask(hwdev), flag); } static void pci_iommu_free_coherent(struct device *hwdev, size_t size, @@ -85,7 +104,8 @@ static void pci_iommu_free_coherent(struct device *hwdev, size_t size, static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr, size_t size, enum dma_data_direction direction) { - return iommu_map_single(devnode_table(hwdev), vaddr, size, direction); + return iommu_map_single(devnode_table(hwdev), vaddr, size, + device_to_mask(hwdev), direction); } @@ -100,7 +120,7 @@ static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist, int nelems, enum dma_data_direction direction) { return iommu_map_sg(pdev, devnode_table(pdev), sglist, - nelems, direction); + nelems, device_to_mask(pdev), direction); } static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist, @@ -112,7 +132,19 @@ static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist, /* We support DMA to/from any memory page via the iommu */ static int pci_iommu_dma_supported(struct device *dev, u64 mask) { - return 1; + struct iommu_table *tbl = devnode_table(dev); + + if (!tbl || tbl->it_offset > mask) { + printk(KERN_INFO "Warning: IOMMU table offset too big for device mask\n"); + if (tbl) + printk(KERN_INFO "mask: 0x%08lx, table offset: 0x%08lx\n", + mask, tbl->it_offset); + else + printk(KERN_INFO "mask: 0x%08lx, table unavailable\n", + mask); + return 0; + } else + return 1; } void pci_iommu_init(void) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index dfa5398ab3c..4b052ae5dc3 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -81,6 +81,7 @@ EXPORT_SYMBOL(strcat); EXPORT_SYMBOL(strlen); EXPORT_SYMBOL(strcmp); EXPORT_SYMBOL(strcasecmp); +EXPORT_SYMBOL(strncasecmp); EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 4336390bcf3..9a07f97f071 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -62,7 +62,7 @@ static int __initdata dt_root_addr_cells; static int __initdata dt_root_size_cells; #ifdef CONFIG_PPC64 -static int __initdata iommu_is_off; +int __initdata iommu_is_off; int __initdata iommu_force_on; unsigned long tce_alloc_start, tce_alloc_end; #endif @@ -885,6 +885,74 @@ void __init unflatten_device_tree(void) DBG(" <- unflatten_device_tree()\n"); } +/* + * ibm,pa-features is a per-cpu property that contains a string of + * attribute descriptors, each of which has a 2 byte header plus up + * to 254 bytes worth of processor attribute bits. First header + * byte specifies the number of bytes following the header. + * Second header byte is an "attribute-specifier" type, of which + * zero is the only currently-defined value. + * Implementation: Pass in the byte and bit offset for the feature + * that we are interested in. The function will return -1 if the + * pa-features property is missing, or a 1/0 to indicate if the feature + * is supported/not supported. Note that the bit numbers are + * big-endian to match the definition in PAPR. + */ +static struct ibm_pa_feature { + unsigned long cpu_features; /* CPU_FTR_xxx bit */ + unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */ + unsigned char pabyte; /* byte number in ibm,pa-features */ + unsigned char pabit; /* bit number (big-endian) */ + unsigned char invert; /* if 1, pa bit set => clear feature */ +} ibm_pa_features[] __initdata = { + {0, PPC_FEATURE_HAS_MMU, 0, 0, 0}, + {0, PPC_FEATURE_HAS_FPU, 0, 1, 0}, + {CPU_FTR_SLB, 0, 0, 2, 0}, + {CPU_FTR_CTRL, 0, 0, 3, 0}, + {CPU_FTR_NOEXECUTE, 0, 0, 6, 0}, + {CPU_FTR_NODSISRALIGN, 0, 1, 1, 1}, + {CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0}, +}; + +static void __init check_cpu_pa_features(unsigned long node) +{ + unsigned char *pa_ftrs; + unsigned long len, tablelen, i, bit; + + pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); + if (pa_ftrs == NULL) + return; + + /* find descriptor with type == 0 */ + for (;;) { + if (tablelen < 3) + return; + len = 2 + pa_ftrs[0]; + if (tablelen < len) + return; /* descriptor 0 not found */ + if (pa_ftrs[1] == 0) + break; + tablelen -= len; + pa_ftrs += len; + } + + /* loop over bits we know about */ + for (i = 0; i < ARRAY_SIZE(ibm_pa_features); ++i) { + struct ibm_pa_feature *fp = &ibm_pa_features[i]; + + if (fp->pabyte >= pa_ftrs[0]) + continue; + bit = (pa_ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1; + if (bit ^ fp->invert) { + cur_cpu_spec->cpu_features |= fp->cpu_features; + cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs; + } else { + cur_cpu_spec->cpu_features &= ~fp->cpu_features; + cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs; + } + } +} + static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) @@ -969,6 +1037,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node, } #endif /* CONFIG_ALTIVEC */ + check_cpu_pa_features(node); + #ifdef CONFIG_PPC_PSERIES if (nthreads > 1) cur_cpu_spec->cpu_features |= CPU_FTR_SMT; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 7e4d54821a0..078fb553354 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -636,10 +636,96 @@ static void __init early_cmdline_parse(void) #ifdef CONFIG_PPC_PSERIES /* - * To tell the firmware what our capabilities are, we have to pass - * it a fake 32-bit ELF header containing a couple of PT_NOTE sections - * that contain structures that contain the actual values. + * There are two methods for telling firmware what our capabilities are. + * Newer machines have an "ibm,client-architecture-support" method on the + * root node. For older machines, we have to call the "process-elf-header" + * method in the /packages/elf-loader node, passing it a fake 32-bit + * ELF header containing a couple of PT_NOTE sections that contain + * structures that contain various information. */ + +/* + * New method - extensible architecture description vector. + * + * Because the description vector contains a mix of byte and word + * values, we declare it as an unsigned char array, and use this + * macro to put word values in. + */ +#define W(x) ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \ + ((x) >> 8) & 0xff, (x) & 0xff + +/* Option vector bits - generic bits in byte 1 */ +#define OV_IGNORE 0x80 /* ignore this vector */ +#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/ + +/* Option vector 1: processor architectures supported */ +#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */ +#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */ +#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */ +#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */ +#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */ +#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */ + +/* Option vector 2: Open Firmware options supported */ +#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ + +/* Option vector 3: processor options supported */ +#define OV3_FP 0x80 /* floating point */ +#define OV3_VMX 0x40 /* VMX/Altivec */ + +/* Option vector 5: PAPR/OF options supported */ +#define OV5_LPAR 0x80 /* logical partitioning supported */ +#define OV5_SPLPAR 0x40 /* shared-processor LPAR supported */ +/* ibm,dynamic-reconfiguration-memory property supported */ +#define OV5_DRCONF_MEMORY 0x20 +#define OV5_LARGE_PAGES 0x10 /* large pages supported */ + +/* + * The architecture vector has an array of PVR mask/value pairs, + * followed by # option vectors - 1, followed by the option vectors. + */ +static unsigned char ibm_architecture_vec[] = { + W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */ + W(0xffff0000), W(0x003e0000), /* POWER6 */ + W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */ + 5 - 1, /* 5 option vectors */ + + /* option vector 1: processor architectures supported */ + 3 - 1, /* length */ + 0, /* don't ignore, don't halt */ + OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 | + OV1_PPC_2_04 | OV1_PPC_2_05, + + /* option vector 2: Open Firmware options supported */ + 34 - 1, /* length */ + OV2_REAL_MODE, + 0, 0, + W(0xffffffff), /* real_base */ + W(0xffffffff), /* real_size */ + W(0xffffffff), /* virt_base */ + W(0xffffffff), /* virt_size */ + W(0xffffffff), /* load_base */ + W(64), /* 128MB min RMA */ + W(0xffffffff), /* full client load */ + 0, /* min RMA percentage of total RAM */ + 48, /* max log_2(hash table size) */ + + /* option vector 3: processor options supported */ + 3 - 1, /* length */ + 0, /* don't ignore, don't halt */ + OV3_FP | OV3_VMX, + + /* option vector 4: IBM PAPR implementation */ + 2 - 1, /* length */ + 0, /* don't halt */ + + /* option vector 5: PAPR/OF options */ + 3 - 1, /* length */ + 0, /* don't ignore, don't halt */ + OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES, +}; + +/* Old method - ELF header with PT_NOTE sections */ static struct fake_elf { Elf32_Ehdr elfhdr; Elf32_Phdr phdr[2]; @@ -728,8 +814,26 @@ static struct fake_elf { static void __init prom_send_capabilities(void) { - ihandle elfloader; + ihandle elfloader, root; + prom_arg_t ret; + + root = call_prom("open", 1, 1, ADDR("/")); + if (root != 0) { + /* try calling the ibm,client-architecture-support method */ + if (call_prom_ret("call-method", 3, 2, &ret, + ADDR("ibm,client-architecture-support"), + ADDR(ibm_architecture_vec)) == 0) { + /* the call exists... */ + if (ret) + prom_printf("WARNING: ibm,client-architecture" + "-support call FAILED!\n"); + call_prom("close", 1, 0, root); + return; + } + call_prom("close", 1, 0, root); + } + /* no ibm,client-architecture-support call, try the old way */ elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); if (elfloader == 0) { prom_printf("couldn't open /packages/elf-loader\n"); diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index bcb83574335..4a677d1bd4e 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -538,7 +538,7 @@ void do_syscall_trace_enter(struct pt_regs *regs) do_syscall_trace(); if (unlikely(current->audit_context)) - audit_syscall_entry(current, + audit_syscall_entry( #ifdef CONFIG_PPC32 AUDIT_ARCH_PPC, #else @@ -556,8 +556,7 @@ void do_syscall_trace_leave(struct pt_regs *regs) #endif if (unlikely(current->audit_context)) - audit_syscall_exit(current, - (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, + audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); if ((test_thread_flag(TIF_SYSCALL_TRACE) diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 1d93e73a700..684ab1d49c6 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -516,3 +516,11 @@ void probe_machine(void) printk(KERN_INFO "Using %s machine description\n", ppc_md.name); } + +int check_legacy_ioport(unsigned long base_port) +{ + if (ppc_md.check_legacy_ioport == NULL) + return 0; + return ppc_md.check_legacy_ioport(base_port); +} +EXPORT_SYMBOL(check_legacy_ioport); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 13e91c4d70a..4467c49903b 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -594,14 +594,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -int check_legacy_ioport(unsigned long base_port) -{ - if (ppc_md.check_legacy_ioport == NULL) - return 0; - return ppc_md.check_legacy_ioport(base_port); -} -EXPORT_SYMBOL(check_legacy_ioport); - void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 73560ef6f80..5bc2585c803 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -279,7 +279,7 @@ static void unregister_cpu_online(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit sysfs_cpu_notify(struct notifier_block *self, +static int sysfs_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)(long)hcpu; @@ -297,7 +297,7 @@ static int __devinit sysfs_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata sysfs_cpu_nb = { +static struct notifier_block sysfs_cpu_nb = { .notifier_call = sysfs_cpu_notify, }; @@ -322,13 +322,31 @@ static void register_nodes(void) } } } + +int sysfs_add_device_to_node(struct sys_device *dev, int nid) +{ + struct node *node = &node_devices[nid]; + return sysfs_create_link(&node->sysdev.kobj, &dev->kobj, + kobject_name(&dev->kobj)); +} + +void sysfs_remove_device_from_node(struct sys_device *dev, int nid) +{ + struct node *node = &node_devices[nid]; + sysfs_remove_link(&node->sysdev.kobj, kobject_name(&dev->kobj)); +} + #else static void register_nodes(void) { return; } + #endif +EXPORT_SYMBOL_GPL(sysfs_add_device_to_node); +EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node); + /* Only valid if CPU is present. */ static ssize_t show_physical_id(struct sys_device *dev, char *buf) { diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S index a14c9640384..cf56a1d499f 100644 --- a/arch/powerpc/kernel/systbl.S +++ b/arch/powerpc/kernel/systbl.S @@ -324,3 +324,22 @@ COMPAT_SYS(ppoll) SYSCALL(unshare) SYSCALL(splice) SYSCALL(tee) +SYSCALL(vmsplice) +COMPAT_SYS(openat) +SYSCALL(mkdirat) +SYSCALL(mknodat) +SYSCALL(fchownat) +COMPAT_SYS(futimesat) +SYSX(sys_newfstatat, sys_fstatat64, sys_fstatat64) +SYSCALL(unlinkat) +SYSCALL(renameat) +SYSCALL(linkat) +SYSCALL(symlinkat) +SYSCALL(readlinkat) +SYSCALL(fchmodat) +SYSCALL(faccessat) + +/* + * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c + * as well when appropriate. + */ diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 13c655ba284..971020cf3f7 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -202,7 +202,7 @@ static dma_addr_t vio_map_single(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) { return iommu_map_single(to_vio_dev(dev)->iommu_table, vaddr, size, - direction); + ~0ul, direction); } static void vio_unmap_single(struct device *dev, dma_addr_t dma_handle, @@ -216,7 +216,7 @@ static int vio_map_sg(struct device *dev, struct scatterlist *sglist, int nelems, enum dma_data_direction direction) { return iommu_map_sg(dev, to_vio_dev(dev)->iommu_table, sglist, - nelems, direction); + nelems, ~0ul, direction); } static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist, @@ -229,7 +229,7 @@ static void *vio_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size, - dma_handle, flag); + dma_handle, ~0ul, flag); } static void vio_free_coherent(struct device *dev, size_t size, diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 7370f9f33e2..266b8b2ceac 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -30,13 +30,66 @@ #define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT) #define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT) +#ifdef CONFIG_PPC_64K_PAGES +#define HUGEPTE_INDEX_SIZE (PMD_SHIFT-HPAGE_SHIFT) +#else +#define HUGEPTE_INDEX_SIZE (PUD_SHIFT-HPAGE_SHIFT) +#endif +#define PTRS_PER_HUGEPTE (1 << HUGEPTE_INDEX_SIZE) +#define HUGEPTE_TABLE_SIZE (sizeof(pte_t) << HUGEPTE_INDEX_SIZE) + +#define HUGEPD_SHIFT (HPAGE_SHIFT + HUGEPTE_INDEX_SIZE) +#define HUGEPD_SIZE (1UL << HUGEPD_SHIFT) +#define HUGEPD_MASK (~(HUGEPD_SIZE-1)) + +#define huge_pgtable_cache (pgtable_cache[HUGEPTE_CACHE_NUM]) + +/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad() + * will choke on pointers to hugepte tables, which is handy for + * catching screwups early. */ +#define HUGEPD_OK 0x1 + +typedef struct { unsigned long pd; } hugepd_t; + +#define hugepd_none(hpd) ((hpd).pd == 0) + +static inline pte_t *hugepd_page(hugepd_t hpd) +{ + BUG_ON(!(hpd.pd & HUGEPD_OK)); + return (pte_t *)(hpd.pd & ~HUGEPD_OK); +} + +static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr) +{ + unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1)); + pte_t *dir = hugepd_page(*hpdp); + + return dir + idx; +} + +static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, + unsigned long address) +{ + pte_t *new = kmem_cache_alloc(huge_pgtable_cache, + GFP_KERNEL|__GFP_REPEAT); + + if (! new) + return -ENOMEM; + + spin_lock(&mm->page_table_lock); + if (!hugepd_none(*hpdp)) + kmem_cache_free(huge_pgtable_cache, new); + else + hpdp->pd = (unsigned long)new | HUGEPD_OK; + spin_unlock(&mm->page_table_lock); + return 0; +} + /* Modelled after find_linux_pte() */ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) { pgd_t *pg; pud_t *pu; - pmd_t *pm; - pte_t *pt; BUG_ON(! in_hugepage_area(mm->context, addr)); @@ -46,26 +99,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) if (!pgd_none(*pg)) { pu = pud_offset(pg, addr); if (!pud_none(*pu)) { - pm = pmd_offset(pu, addr); #ifdef CONFIG_PPC_64K_PAGES - /* Currently, we use the normal PTE offset within full - * size PTE pages, thus our huge PTEs are scattered in - * the PTE page and we do waste some. We may change - * that in the future, but the current mecanism keeps - * things much simpler - */ - if (!pmd_none(*pm)) { - /* Note: pte_offset_* are all equivalent on - * ppc64 as we don't have HIGHMEM - */ - pt = pte_offset_kernel(pm, addr); - return pt; - } -#else /* CONFIG_PPC_64K_PAGES */ - /* On 4k pages, we put huge PTEs in the PMD page */ - pt = (pte_t *)pm; - return pt; -#endif /* CONFIG_PPC_64K_PAGES */ + pmd_t *pm; + pm = pmd_offset(pu, addr); + if (!pmd_none(*pm)) + return hugepte_offset((hugepd_t *)pm, addr); +#else + return hugepte_offset((hugepd_t *)pu, addr); +#endif } } @@ -76,8 +117,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) { pgd_t *pg; pud_t *pu; - pmd_t *pm; - pte_t *pt; + hugepd_t *hpdp = NULL; BUG_ON(! in_hugepage_area(mm->context, addr)); @@ -87,23 +127,182 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) pu = pud_alloc(mm, pg, addr); if (pu) { +#ifdef CONFIG_PPC_64K_PAGES + pmd_t *pm; pm = pmd_alloc(mm, pu, addr); - if (pm) { + if (pm) + hpdp = (hugepd_t *)pm; +#else + hpdp = (hugepd_t *)pu; +#endif + } + + if (! hpdp) + return NULL; + + if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr)) + return NULL; + + return hugepte_offset(hpdp, addr); +} + +static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp) +{ + pte_t *hugepte = hugepd_page(*hpdp); + + hpdp->pd = 0; + tlb->need_flush = 1; + pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, + HUGEPTE_TABLE_SIZE-1)); +} + #ifdef CONFIG_PPC_64K_PAGES - /* See comment in huge_pte_offset. Note that if we ever - * want to put the page size in the PMD, we would have - * to open code our own pte_alloc* function in order - * to populate and set the size atomically - */ - pt = pte_alloc_map(mm, pm, addr); -#else /* CONFIG_PPC_64K_PAGES */ - pt = (pte_t *)pm; -#endif /* CONFIG_PPC_64K_PAGES */ - return pt; - } +static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, + unsigned long addr, unsigned long end, + unsigned long floor, unsigned long ceiling) +{ + pmd_t *pmd; + unsigned long next; + unsigned long start; + + start = addr; + pmd = pmd_offset(pud, addr); + do { + next = pmd_addr_end(addr, end); + if (pmd_none(*pmd)) + continue; + free_hugepte_range(tlb, (hugepd_t *)pmd); + } while (pmd++, addr = next, addr != end); + + start &= PUD_MASK; + if (start < floor) + return; + if (ceiling) { + ceiling &= PUD_MASK; + if (!ceiling) + return; } + if (end - 1 > ceiling - 1) + return; - return NULL; + pmd = pmd_offset(pud, start); + pud_clear(pud); + pmd_free_tlb(tlb, pmd); +} +#endif + +static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, + unsigned long addr, unsigned long end, + unsigned long floor, unsigned long ceiling) +{ + pud_t *pud; + unsigned long next; + unsigned long start; + + start = addr; + pud = pud_offset(pgd, addr); + do { + next = pud_addr_end(addr, end); +#ifdef CONFIG_PPC_64K_PAGES + if (pud_none_or_clear_bad(pud)) + continue; + hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling); +#else + if (pud_none(*pud)) + continue; + free_hugepte_range(tlb, (hugepd_t *)pud); +#endif + } while (pud++, addr = next, addr != end); + + start &= PGDIR_MASK; + if (start < floor) + return; + if (ceiling) { + ceiling &= PGDIR_MASK; + if (!ceiling) + return; + } + if (end - 1 > ceiling - 1) + return; + + pud = pud_offset(pgd, start); + pgd_clear(pgd); + pud_free_tlb(tlb, pud); +} + +/* + * This function frees user-level page tables of a process. + * + * Must be called with pagetable lock held. + */ +void hugetlb_free_pgd_range(struct mmu_gather **tlb, + unsigned long addr, unsigned long end, + unsigned long floor, unsigned long ceiling) +{ + pgd_t *pgd; + unsigned long next; + unsigned long start; + + /* + * Comments below take from the normal free_pgd_range(). They + * apply here too. The tests against HUGEPD_MASK below are + * essential, because we *don't* test for this at the bottom + * level. Without them we'll attempt to free a hugepte table + * when we unmap just part of it, even if there are other + * active mappings using it. + * + * The next few lines have given us lots of grief... + * + * Why are we testing HUGEPD* at this top level? Because + * often there will be no work to do at all, and we'd prefer + * not to go all the way down to the bottom just to discover + * that. + * + * Why all these "- 1"s? Because 0 represents both the bottom + * of the address space and the top of it (using -1 for the + * top wouldn't help much: the masks would do the wrong thing). + * The rule is that addr 0 and floor 0 refer to the bottom of + * the address space, but end 0 and ceiling 0 refer to the top + * Comparisons need to use "end - 1" and "ceiling - 1" (though + * that end 0 case should be mythical). + * + * Wherever addr is brought up or ceiling brought down, we + * must be careful to reject "the opposite 0" before it + * confuses the subsequent tests. But what about where end is + * brought down by HUGEPD_SIZE below? no, end can't go down to + * 0 there. + * + * Whereas we round start (addr) and ceiling down, by different + * masks at different levels, in order to test whether a table + * now has no other vmas using it, so can be freed, we don't + * bother to round floor or end up - the tests don't need that. + */ + + addr &= HUGEPD_MASK; + if (addr < floor) { + addr += HUGEPD_SIZE; + if (!addr) + return; + } + if (ceiling) { + ceiling &= HUGEPD_MASK; + if (!ceiling) + return; + } + if (end - 1 > ceiling - 1) + end -= HUGEPD_SIZE; + if (addr > end - 1) + return; + + start = addr; + pgd = pgd_offset((*tlb)->mm, addr); + do { + BUG_ON(! in_hugepage_area((*tlb)->mm->context, addr)); + next = pgd_addr_end(addr, end); + if (pgd_none_or_clear_bad(pgd)) + continue; + hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling); + } while (pgd++, addr = next, addr != end); } void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, @@ -841,3 +1040,27 @@ repeat: out: return err; } + +static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags) +{ + memset(addr, 0, kmem_cache_size(cache)); +} + +static int __init hugetlbpage_init(void) +{ + if (!cpu_has_feature(CPU_FTR_16M_PAGE)) + return -ENODEV; + + huge_pgtable_cache = kmem_cache_create("hugepte_cache", + HUGEPTE_TABLE_SIZE, + HUGEPTE_TABLE_SIZE, + SLAB_HWCACHE_ALIGN | + SLAB_MUST_HWCACHE_ALIGN, + zero_ctor, NULL); + if (! huge_pgtable_cache) + panic("hugetlbpage_init(): could not create hugepte cache\n"); + + return 0; +} + +module_init(hugetlbpage_init); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index babebd15bdc..9e30f968c18 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -162,7 +162,14 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { }; #endif /* CONFIG_PPC_64K_PAGES */ +#ifdef CONFIG_HUGETLB_PAGE +/* Hugepages need one extra cache, initialized in hugetlbpage.c. We + * can't put into the tables above, because HPAGE_SHIFT is not compile + * time constant. */ +kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1]; +#else kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; +#endif void pgtable_cache_init(void) { diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 0a335f34974..092355f3739 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -194,7 +194,7 @@ static int *of_get_associativity(struct device_node *dev) /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa * info is found. */ -static int of_node_to_nid(struct device_node *device) +static int of_node_to_nid_single(struct device_node *device) { int nid = -1; unsigned int *tmp; @@ -216,6 +216,28 @@ out: return nid; } +/* Walk the device tree upwards, looking for an associativity id */ +int of_node_to_nid(struct device_node *device) +{ + struct device_node *tmp; + int nid = -1; + + of_node_get(device); + while (device) { + nid = of_node_to_nid_single(device); + if (nid != -1) + break; + + tmp = device; + device = of_get_parent(tmp); + of_node_put(tmp); + } + of_node_put(device); + + return nid; +} +EXPORT_SYMBOL_GPL(of_node_to_nid); + /* * In theory, the "ibm,associativity" property may contain multiple * associativity lists because a resource may be multiply connected @@ -300,7 +322,7 @@ static int __cpuinit numa_setup_cpu(unsigned long lcpu) goto out; } - nid = of_node_to_nid(cpu); + nid = of_node_to_nid_single(cpu); if (nid < 0 || !node_online(nid)) nid = any_online_node(NODE_MASK_ALL); @@ -393,7 +415,7 @@ static int __init parse_numa_properties(void) cpu = find_cpu_node(i); BUG_ON(!cpu); - nid = of_node_to_nid(cpu); + nid = of_node_to_nid_single(cpu); of_node_put(cpu); /* @@ -437,7 +459,7 @@ new_range: * have associativity properties. If none, then * everything goes to default_nid. */ - nid = of_node_to_nid(memory); + nid = of_node_to_nid_single(memory); if (nid < 0) nid = default_nid; node_set_online(nid); @@ -776,7 +798,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr) ha_new_range: start = read_n_cells(n_mem_addr_cells, &memcell_buf); size = read_n_cells(n_mem_size_cells, &memcell_buf); - nid = of_node_to_nid(memory); + nid = of_node_to_nid_single(memory); /* Domains not present at boot default to 0 */ if (nid < 0 || !node_online(nid)) diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index c2a3db8edb0..6a02d51086c 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -12,7 +12,8 @@ config SPU_FS config SPUFS_MMAP bool - depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES + depends on SPU_FS && SPARSEMEM + select MEMORY_HOTPLUG default y endmenu diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index dac5d0365fd..6574b22b3cf 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -29,6 +29,8 @@ #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/console.h> +#include <linux/mutex.h> +#include <linux/memory_hotplug.h> #include <asm/mmu.h> #include <asm/processor.h> @@ -46,6 +48,7 @@ #include <asm/cputable.h> #include <asm/ppc-pci.h> #include <asm/irq.h> +#include <asm/spu.h> #include "interrupt.h" #include "iommu.h" @@ -69,77 +72,6 @@ static void cell_show_cpuinfo(struct seq_file *m) of_node_put(root); } -#ifdef CONFIG_SPARSEMEM -static int __init find_spu_node_id(struct device_node *spe) -{ - unsigned int *id; -#ifdef CONFIG_NUMA - struct device_node *cpu; - cpu = spe->parent->parent; - id = (unsigned int *)get_property(cpu, "node-id", NULL); -#else - id = NULL; -#endif - return id ? *id : 0; -} - -static void __init cell_spuprop_present(struct device_node *spe, - const char *prop, int early) -{ - struct address_prop { - unsigned long address; - unsigned int len; - } __attribute__((packed)) *p; - int proplen; - - unsigned long start_pfn, end_pfn, pfn; - int node_id; - - p = (void*)get_property(spe, prop, &proplen); - WARN_ON(proplen != sizeof (*p)); - - node_id = find_spu_node_id(spe); - - start_pfn = p->address >> PAGE_SHIFT; - end_pfn = (p->address + p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; - - /* We need to call memory_present *before* the call to sparse_init, - but we can initialize the page structs only *after* that call. - Thus, we're being called twice. */ - if (early) - memory_present(node_id, start_pfn, end_pfn); - else { - /* As the pages backing SPU LS and I/O are outside the range - of regular memory, their page structs were not initialized - by free_area_init. Do it here instead. */ - for (pfn = start_pfn; pfn < end_pfn; pfn++) { - struct page *page = pfn_to_page(pfn); - set_page_links(page, ZONE_DMA, node_id, pfn); - init_page_count(page); - reset_page_mapcount(page); - SetPageReserved(page); - INIT_LIST_HEAD(&page->lru); - } - } -} - -static void __init cell_spumem_init(int early) -{ - struct device_node *node; - for (node = of_find_node_by_type(NULL, "spe"); - node; node = of_find_node_by_type(node, "spe")) { - cell_spuprop_present(node, "local-store", early); - cell_spuprop_present(node, "problem", early); - cell_spuprop_present(node, "priv1", early); - cell_spuprop_present(node, "priv2", early); - } -} -#else -static void __init cell_spumem_init(int early) -{ -} -#endif - static void cell_progress(char *s, unsigned short hex) { printk("*** %04x : %s\n", hex, s ? s : ""); @@ -172,8 +104,6 @@ static void __init cell_setup_arch(void) #endif mmio_nvram_init(); - - cell_spumem_init(0); } /* @@ -189,8 +119,6 @@ static void __init cell_init_early(void) ppc64_interrupt_controller = IC_CELL_PIC; - cell_spumem_init(1); - DBG(" <- cell_init_early()\n"); } diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 269dda4fd0b..ad141fe8d52 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -306,19 +306,19 @@ spu_request_irqs(struct spu *spu) snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number); ret = request_irq(irq_base + spu->isrc, - spu_irq_class_0, 0, spu->irq_c0, spu); + spu_irq_class_0, SA_INTERRUPT, spu->irq_c0, spu); if (ret) goto out; snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number); ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_1, 0, spu->irq_c1, spu); + spu_irq_class_1, SA_INTERRUPT, spu->irq_c1, spu); if (ret) goto out1; snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number); ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_2, 0, spu->irq_c2, spu); + spu_irq_class_2, SA_INTERRUPT, spu->irq_c2, spu); if (ret) goto out2; goto out; @@ -487,10 +487,14 @@ int spu_irq_class_1_bottom(struct spu *spu) ea = spu->dar; dsisr = spu->dsisr; if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) { + u64 flags; + access = (_PAGE_PRESENT | _PAGE_USER); access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL; + local_irq_save(flags); if (hash_page(ea, access, 0x300) != 0) error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; + local_irq_restore(flags); } if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) { if ((ret = spu_handle_mm_fault(spu)) != 0) @@ -516,8 +520,50 @@ void spu_irq_setaffinity(struct spu *spu, int cpu) } EXPORT_SYMBOL_GPL(spu_irq_setaffinity); -static void __iomem * __init map_spe_prop(struct device_node *n, - const char *name) +static int __init find_spu_node_id(struct device_node *spe) +{ + unsigned int *id; + struct device_node *cpu; + cpu = spe->parent->parent; + id = (unsigned int *)get_property(cpu, "node-id", NULL); + return id ? *id : 0; +} + +static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe, + const char *prop) +{ + static DEFINE_MUTEX(add_spumem_mutex); + + struct address_prop { + unsigned long address; + unsigned int len; + } __attribute__((packed)) *p; + int proplen; + + unsigned long start_pfn, nr_pages; + struct pglist_data *pgdata; + struct zone *zone; + int ret; + + p = (void*)get_property(spe, prop, &proplen); + WARN_ON(proplen != sizeof (*p)); + + start_pfn = p->address >> PAGE_SHIFT; + nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT; + + pgdata = NODE_DATA(spu->nid); + zone = pgdata->node_zones; + + /* XXX rethink locking here */ + mutex_lock(&add_spumem_mutex); + ret = __add_pages(zone, start_pfn, nr_pages); + mutex_unlock(&add_spumem_mutex); + + return ret; +} + +static void __iomem * __init map_spe_prop(struct spu *spu, + struct device_node *n, const char *name) { struct address_prop { unsigned long address; @@ -526,6 +572,8 @@ static void __iomem * __init map_spe_prop(struct device_node *n, void *p; int proplen; + void* ret = NULL; + int err = 0; p = get_property(n, name, &proplen); if (proplen != sizeof (struct address_prop)) @@ -533,7 +581,14 @@ static void __iomem * __init map_spe_prop(struct device_node *n, prop = p; - return ioremap(prop->address, prop->len); + err = cell_spuprop_present(spu, n, name); + if (err && (err != -EEXIST)) + goto out; + + ret = ioremap(prop->address, prop->len); + + out: + return ret; } static void spu_unmap(struct spu *spu) @@ -544,44 +599,45 @@ static void spu_unmap(struct spu *spu) iounmap((u8 __iomem *)spu->local_store); } -static int __init spu_map_device(struct spu *spu, struct device_node *spe) +static int __init spu_map_device(struct spu *spu, struct device_node *node) { char *prop; int ret; ret = -ENODEV; - prop = get_property(spe, "isrc", NULL); + prop = get_property(node, "isrc", NULL); if (!prop) goto out; spu->isrc = *(unsigned int *)prop; - spu->name = get_property(spe, "name", NULL); + spu->name = get_property(node, "name", NULL); if (!spu->name) goto out; - prop = get_property(spe, "local-store", NULL); + prop = get_property(node, "local-store", NULL); if (!prop) goto out; spu->local_store_phys = *(unsigned long *)prop; /* we use local store as ram, not io memory */ - spu->local_store = (void __force *)map_spe_prop(spe, "local-store"); + spu->local_store = (void __force *) + map_spe_prop(spu, node, "local-store"); if (!spu->local_store) goto out; - prop = get_property(spe, "problem", NULL); + prop = get_property(node, "problem", NULL); if (!prop) goto out_unmap; spu->problem_phys = *(unsigned long *)prop; - spu->problem= map_spe_prop(spe, "problem"); + spu->problem= map_spe_prop(spu, node, "problem"); if (!spu->problem) goto out_unmap; - spu->priv1= map_spe_prop(spe, "priv1"); + spu->priv1= map_spe_prop(spu, node, "priv1"); /* priv1 is not available on a hypervisor */ - spu->priv2= map_spe_prop(spe, "priv2"); + spu->priv2= map_spe_prop(spu, node, "priv2"); if (!spu->priv2) goto out_unmap; ret = 0; @@ -593,17 +649,6 @@ out: return ret; } -static int __init find_spu_node_id(struct device_node *spe) -{ - unsigned int *id; - struct device_node *cpu; - - cpu = spe->parent->parent; - id = (unsigned int *)get_property(cpu, "node-id", NULL); - - return id ? *id : 0; -} - static int __init create_spu(struct device_node *spe) { struct spu *spu; @@ -620,6 +665,10 @@ static int __init create_spu(struct device_node *spe) goto out_free; spu->node = find_spu_node_id(spe); + spu->nid = of_node_to_nid(spe); + if (spu->nid == -1) + spu->nid = 0; + spu->stop_code = 0; spu->slb_replace = 0; spu->mm = NULL; diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c index 6594bec7388..95b36430aa0 100644 --- a/arch/powerpc/platforms/cell/spu_callbacks.c +++ b/arch/powerpc/platforms/cell/spu_callbacks.c @@ -317,17 +317,30 @@ void *spu_syscall_table[] = { [__NR_ppoll] sys_ni_syscall, /* sys_ppoll */ [__NR_unshare] sys_unshare, [__NR_splice] sys_splice, + [__NR_tee] sys_tee, + [__NR_vmsplice] sys_vmsplice, + [__NR_openat] sys_openat, + [__NR_mkdirat] sys_mkdirat, + [__NR_mknodat] sys_mknodat, + [__NR_fchownat] sys_fchownat, + [__NR_futimesat] sys_futimesat, + [__NR_newfstatat] sys_newfstatat, + [__NR_unlinkat] sys_unlinkat, + [__NR_renameat] sys_renameat, + [__NR_linkat] sys_linkat, + [__NR_symlinkat] sys_symlinkat, + [__NR_readlinkat] sys_readlinkat, + [__NR_fchmodat] sys_fchmodat, + [__NR_faccessat] sys_faccessat, }; long spu_sys_callback(struct spu_syscall_block *s) { long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6); - BUILD_BUG_ON(ARRAY_SIZE(spu_syscall_table) != __NR_syscalls); - syscall = spu_syscall_table[s->nr_ret]; - if (s->nr_ret >= __NR_syscalls) { + if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) { pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret); return -ENOSYS; } diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index e14f9ac55cf..df2343e1956 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -231,6 +231,14 @@ static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host) return isr; } +static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result) +{ + kw_write_reg(reg_control, KW_I2C_CTL_STOP); + host->state = state_stop; + host->result = result; +} + + static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) { u8 ack; @@ -246,42 +254,36 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) } if (isr == 0) { + printk(KERN_WARNING "low_i2c: Timeout in i2c transfer" + " on keywest !\n"); if (host->state != state_stop) { - DBG_LOW("KW: Timeout !\n"); - host->result = -EIO; - goto stop; - } - if (host->state == state_stop) { - ack = kw_read_reg(reg_status); - if (ack & KW_I2C_STAT_BUSY) - kw_write_reg(reg_status, 0); - host->state = state_idle; - kw_write_reg(reg_ier, 0x00); - if (!host->polled) - complete(&host->complete); + kw_i2c_do_stop(host, -EIO); + return; } + ack = kw_read_reg(reg_status); + if (ack & KW_I2C_STAT_BUSY) + kw_write_reg(reg_status, 0); + host->state = state_idle; + kw_write_reg(reg_ier, 0x00); + if (!host->polled) + complete(&host->complete); return; } if (isr & KW_I2C_IRQ_ADDR) { ack = kw_read_reg(reg_status); if (host->state != state_addr) { - kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); WRONG_STATE("KW_I2C_IRQ_ADDR"); - host->result = -EIO; - goto stop; + kw_i2c_do_stop(host, -EIO); } if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { - host->result = -ENODEV; - DBG_LOW("KW: NAK on address\n"); + host->result = -ENXIO; host->state = state_stop; - return; + DBG_LOW("KW: NAK on address\n"); } else { - if (host->len == 0) { - kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR); - goto stop; - } - if (host->rw) { + if (host->len == 0) + kw_i2c_do_stop(host, 0); + else if (host->rw) { host->state = state_read; if (host->len > 1) kw_write_reg(reg_control, @@ -308,25 +310,19 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) ack = kw_read_reg(reg_status); if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { DBG_LOW("KW: nack on data write\n"); - host->result = -EIO; - goto stop; + host->result = -EFBIG; + host->state = state_stop; } else if (host->len) { kw_write_reg(reg_data, *(host->data++)); host->len--; - } else { - kw_write_reg(reg_control, KW_I2C_CTL_STOP); - host->state = state_stop; - host->result = 0; - } - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); + } else + kw_i2c_do_stop(host, 0); } else { - kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); WRONG_STATE("KW_I2C_IRQ_DATA"); - if (host->state != state_stop) { - host->result = -EIO; - goto stop; - } + if (host->state != state_stop) + kw_i2c_do_stop(host, -EIO); } + kw_write_reg(reg_isr, KW_I2C_IRQ_DATA); } if (isr & KW_I2C_IRQ_STOP) { @@ -340,14 +336,10 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr) complete(&host->complete); } + /* Below should only happen in manual mode which we don't use ... */ if (isr & KW_I2C_IRQ_START) kw_write_reg(reg_isr, KW_I2C_IRQ_START); - return; - stop: - kw_write_reg(reg_control, KW_I2C_CTL_STOP); - host->state = state_stop; - return; } /* Interrupt handler */ @@ -544,11 +536,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) return NULL; } - /* Make sure IRA is disabled */ + /* Make sure IRQ is disabled */ kw_write_reg(reg_ier, 0); /* Request chip interrupt */ - if (request_irq(host->irq, kw_i2c_irq, SA_SHIRQ, "keywest i2c", host)) + if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host)) host->irq = NO_IRQ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n", diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index f5d8d15d74f..ea179afea63 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1097,7 +1097,7 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial) * (iBook second controller) */ if (dev->vendor == PCI_VENDOR_ID_APPLE - && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) + && dev->class == PCI_CLASS_SERIAL_USB_OHCI && !node) { printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n", pci_name(dev)); diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index a1bda6f96fd..40020c65c89 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -118,7 +118,15 @@ int eeh_send_failure_event (struct device_node *dn, { unsigned long flags; struct eeh_event *event; + char *location; + if (!mem_init_done) { + printk(KERN_ERR "EEH: event during early boot not handled\n"); + location = (char *) get_property(dn, "ibm,loc-code", NULL); + printk(KERN_ERR "EEH: device node = %s\n", dn->full_name); + printk(KERN_ERR "EEH: PCI location = %s\n", location); + return 1; + } event = kmalloc(sizeof(*event), GFP_ATOMIC); if (event == NULL) { printk (KERN_ERR "EEH: out of memory, event not handled\n"); diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 61d31742861..38087bd6e3c 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -49,6 +49,7 @@ #include "dart.h" +extern int iommu_is_off; extern int iommu_force_on; /* Physical base address and size of the DART table */ @@ -329,10 +330,17 @@ void iommu_init_early_dart(void) void __init alloc_dart_table(void) { - /* Only reserve DART space if machine has more than 2GB of RAM + /* Only reserve DART space if machine has more than 1GB of RAM * or if requested with iommu=on on cmdline. + * + * 1GB of RAM is picked as limit because some default devices + * (i.e. Airport Extreme) have 30 bit address range limits. */ - if (lmb_end_of_DRAM() <= 0x80000000ull && !iommu_force_on) + + if (iommu_is_off) + return; + + if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull) return; /* 512 pages (2MB) is max DART tablesize. */ |