diff options
Diffstat (limited to 'arch/ppc/8260_io/enet.c')
| -rw-r--r-- | arch/ppc/8260_io/enet.c | 867 |
1 files changed, 867 insertions, 0 deletions
diff --git a/arch/ppc/8260_io/enet.c b/arch/ppc/8260_io/enet.c new file mode 100644 index 00000000000..ac6d55fe223 --- /dev/null +++ b/arch/ppc/8260_io/enet.c @@ -0,0 +1,867 @@ +/* + * Ethernet driver for Motorola MPC8260. + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * Copyright (c) 2000 MontaVista Software Inc. (source@mvista.com) + * 2.3.99 Updates + * + * I copied this from the 8xx CPM Ethernet driver, so follow the + * credits back through that. + * + * This version of the driver is somewhat selectable for the different + * processor/board combinations. It works for the boards I know about + * now, and should be easily modified to include others. Some of the + * configuration information is contained in <asm/commproc.h> and the + * remainder is here. + * + * Buffer descriptors are kept in the CPM dual port RAM, and the frame + * buffers are in the host memory. + * + * Right now, I am very watseful with the buffers. I allocate memory + * pages and then divide them into 2K frame buffers. This way I know I + * have buffers large enough to hold one frame within one buffer descriptor. + * Once I get this working, I will use 64 or 128 byte CPM buffers, which + * will be much more memory efficient and will easily handle lots of + * small packets. + * + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/bitops.h> + +#include <asm/immap_cpm2.h> +#include <asm/pgtable.h> +#include <asm/mpc8260.h> +#include <asm/uaccess.h> +#include <asm/cpm2.h> +#include <asm/irq.h> + +/* + * Theory of Operation + * + * The MPC8260 CPM performs the Ethernet processing on an SCC. It can use + * an aribtrary number of buffers on byte boundaries, but must have at + * least two receive buffers to prevent constant overrun conditions. + * + * The buffer descriptors are allocated from the CPM dual port memory + * with the data buffers allocated from host memory, just like all other + * serial communication protocols. The host memory buffers are allocated + * from the free page pool, and then divided into smaller receive and + * transmit buffers. The size of the buffers should be a power of two, + * since that nicely divides the page. This creates a ring buffer + * structure similar to the LANCE and other controllers. + * + * Like the LANCE driver: + * The driver runs as two independent, single-threaded flows of control. One + * is the send-packet routine, which enforces single-threaded use by the + * cep->tx_busy flag. The other thread is the interrupt handler, which is + * single threaded by the hardware and other software. + */ + +/* The transmitter timeout + */ +#define TX_TIMEOUT (2*HZ) + +/* The number of Tx and Rx buffers. These are allocated from the page + * pool. The code may assume these are power of two, so it is best + * to keep them that size. + * We don't need to allocate pages for the transmitter. We just use + * the skbuffer directly. + */ +#define CPM_ENET_RX_PAGES 4 +#define CPM_ENET_RX_FRSIZE 2048 +#define CPM_ENET_RX_FRPPG (PAGE_SIZE / CPM_ENET_RX_FRSIZE) +#define RX_RING_SIZE (CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES) +#define TX_RING_SIZE 8 /* Must be power of two */ +#define TX_RING_MOD_MASK 7 /* for this to work */ + +/* The CPM stores dest/src/type, data, and checksum for receive packets. + */ +#define PKT_MAXBUF_SIZE 1518 +#define PKT_MINBUF_SIZE 64 +#define PKT_MAXBLR_SIZE 1520 + +/* The CPM buffer descriptors track the ring buffers. The rx_bd_base and + * tx_bd_base always point to the base of the buffer descriptors. The + * cur_rx and cur_tx point to the currently available buffer. + * The dirty_tx tracks the current buffer that is being sent by the + * controller. The cur_tx and dirty_tx are equal under both completely + * empty and completely full conditions. The empty/ready indicator in + * the buffer descriptor determines the actual condition. + */ +struct scc_enet_private { + /* The saved address of a sent-in-place packet/buffer, for skfree(). */ + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + ushort skb_cur; + ushort skb_dirty; + + /* CPM dual port RAM relative addresses. + */ + cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ + cbd_t *tx_bd_base; + cbd_t *cur_rx, *cur_tx; /* The next free ring entry */ + cbd_t *dirty_tx; /* The ring entries to be free()ed. */ + scc_t *sccp; + struct net_device_stats stats; + uint tx_full; + spinlock_t lock; +}; + +static int scc_enet_open(struct net_device *dev); +static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int scc_enet_rx(struct net_device *dev); +static irqreturn_t scc_enet_interrupt(int irq, void *dev_id, struct pt_regs *); +static int scc_enet_close(struct net_device *dev); +static struct net_device_stats *scc_enet_get_stats(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); + +/* These will be configurable for the SCC choice. +*/ +#define CPM_ENET_BLOCK CPM_CR_SCC1_SBLOCK +#define CPM_ENET_PAGE CPM_CR_SCC1_PAGE +#define PROFF_ENET PROFF_SCC1 +#define SCC_ENET 0 +#define SIU_INT_ENET SIU_INT_SCC1 + +/* These are both board and SCC dependent.... +*/ +#define PD_ENET_RXD ((uint)0x00000001) +#define PD_ENET_TXD ((uint)0x00000002) +#define PD_ENET_TENA ((uint)0x00000004) +#define PC_ENET_RENA ((uint)0x00020000) +#define PC_ENET_CLSN ((uint)0x00000004) +#define PC_ENET_TXCLK ((uint)0x00000800) +#define PC_ENET_RXCLK ((uint)0x00000400) +#define CMX_CLK_ROUTE ((uint)0x25000000) +#define CMX_CLK_MASK ((uint)0xff000000) + +/* Specific to a board. +*/ +#define PC_EST8260_ENET_LOOPBACK ((uint)0x80000000) +#define PC_EST8260_ENET_SQE ((uint)0x40000000) +#define PC_EST8260_ENET_NOTFD ((uint)0x20000000) + +static int +scc_enet_open(struct net_device *dev) +{ + + /* I should reset the ring buffers here, but I don't yet know + * a simple way to do that. + */ + netif_start_queue(dev); + return 0; /* Always succeed */ +} + +static int +scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv; + volatile cbd_t *bdp; + + + /* Fill in a Tx ring entry */ + bdp = cep->cur_tx; + +#ifndef final_version + if (bdp->cbd_sc & BD_ENET_TX_READY) { + /* Ooops. All transmit buffers are full. Bail out. + * This should not happen, since cep->tx_full should be set. + */ + printk("%s: tx queue full!.\n", dev->name); + return 1; + } +#endif + + /* Clear all of the status flags. + */ + bdp->cbd_sc &= ~BD_ENET_TX_STATS; + + /* If the frame is short, tell CPM to pad it. + */ + if (skb->len <= ETH_ZLEN) + bdp->cbd_sc |= BD_ENET_TX_PAD; + else + bdp->cbd_sc &= ~BD_ENET_TX_PAD; + + /* Set buffer length and buffer pointer. + */ + bdp->cbd_datlen = skb->len; + bdp->cbd_bufaddr = __pa(skb->data); + + /* Save skb pointer. + */ + cep->tx_skbuff[cep->skb_cur] = skb; + + cep->stats.tx_bytes += skb->len; + cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK; + + spin_lock_irq(&cep->lock); + + /* Send it on its way. Tell CPM its ready, interrupt when done, + * its the last BD of the frame, and to put the CRC on the end. + */ + bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC); + + dev->trans_start = jiffies; + + /* If this was the last BD in the ring, start at the beginning again. + */ + if (bdp->cbd_sc & BD_ENET_TX_WRAP) + bdp = cep->tx_bd_base; + else + bdp++; + + if (bdp->cbd_sc & BD_ENET_TX_READY) { + netif_stop_queue(dev); + cep->tx_full = 1; + } + + cep->cur_tx = (cbd_t *)bdp; + + spin_unlock_irq(&cep->lock); + + return 0; +} + +static void +scc_enet_timeout(struct net_device *dev) +{ + struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv; + + printk("%s: transmit timed out.\n", dev->name); + cep->stats.tx_errors++; +#ifndef final_version + { + int i; + cbd_t *bdp; + printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n", + cep->cur_tx, cep->tx_full ? " (full)" : "", + cep->cur_rx); + bdp = cep->tx_bd_base; + printk(" Tx @base %p :\n", bdp); + for (i = 0 ; i < TX_RING_SIZE; i++, bdp++) + printk("%04x %04x %08x\n", + bdp->cbd_sc, + bdp->cbd_datlen, + bdp->cbd_bufaddr); + bdp = cep->rx_bd_base; + printk(" Rx @base %p :\n", bdp); + for (i = 0 ; i < RX_RING_SIZE; i++, bdp++) + printk("%04x %04x %08x\n", + bdp->cbd_sc, + bdp->cbd_datlen, + bdp->cbd_bufaddr); + } +#endif + if (!cep->tx_full) + netif_wake_queue(dev); +} + +/* The interrupt handler. + * This is called from the CPM handler, not the MPC core interrupt. + */ +static irqreturn_t +scc_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs) +{ + struct net_device *dev = dev_id; + volatile struct scc_enet_private *cep; + volatile cbd_t *bdp; + ushort int_events; + int must_restart; + + cep = (struct scc_enet_private *)dev->priv; + + /* Get the interrupt events that caused us to be here. + */ + int_events = cep->sccp->scc_scce; + cep->sccp->scc_scce = int_events; + must_restart = 0; + + /* Handle receive event in its own function. + */ + if (int_events & SCCE_ENET_RXF) + scc_enet_rx(dev_id); + + /* Check for a transmit error. The manual is a little unclear + * about this, so the debug code until I get it figured out. It + * appears that if TXE is set, then TXB is not set. However, + * if carrier sense is lost during frame transmission, the TXE + * bit is set, "and continues the buffer transmission normally." + * I don't know if "normally" implies TXB is set when the buffer + * descriptor is closed.....trial and error :-). + */ + + /* Transmit OK, or non-fatal error. Update the buffer descriptors. + */ + if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) { + spin_lock(&cep->lock); + bdp = cep->dirty_tx; + while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) { + if ((bdp==cep->cur_tx) && (cep->tx_full == 0)) + break; + + if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */ + cep->stats.tx_heartbeat_errors++; + if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */ + cep->stats.tx_window_errors++; + if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */ + cep->stats.tx_aborted_errors++; + if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */ + cep->stats.tx_fifo_errors++; + if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */ + cep->stats.tx_carrier_errors++; + + + /* No heartbeat or Lost carrier are not really bad errors. + * The others require a restart transmit command. + */ + if (bdp->cbd_sc & + (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) { + must_restart = 1; + cep->stats.tx_errors++; + } + + cep->stats.tx_packets++; + + /* Deferred means some collisions occurred during transmit, + * but we eventually sent the packet OK. + */ + if (bdp->cbd_sc & BD_ENET_TX_DEF) + cep->stats.collisions++; + + /* Free the sk buffer associated with this last transmit. + */ + dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]); + cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK; + + /* Update pointer to next buffer descriptor to be transmitted. + */ + if (bdp->cbd_sc & BD_ENET_TX_WRAP) + bdp = cep->tx_bd_base; + else + bdp++; + + /* I don't know if we can be held off from processing these + * interrupts for more than one frame time. I really hope + * not. In such a case, we would now want to check the + * currently available BD (cur_tx) and determine if any + * buffers between the dirty_tx and cur_tx have also been + * sent. We would want to process anything in between that + * does not have BD_ENET_TX_READY set. + */ + + /* Since we have freed up a buffer, the ring is no longer + * full. + */ + if (cep->tx_full) { + cep->tx_full = 0; + if (netif_queue_stopped(dev)) { + netif_wake_queue(dev); + } + } + + cep->dirty_tx = (cbd_t *)bdp; + } + + if (must_restart) { + volatile cpm_cpm2_t *cp; + + /* Some transmit errors cause the transmitter to shut + * down. We now issue a restart transmit. Since the + * errors close the BD and update the pointers, the restart + * _should_ pick up without having to reset any of our + * pointers either. + */ + + cp = cpmp; + cp->cp_cpcr = + mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0, + CPM_CR_RESTART_TX) | CPM_CR_FLG; + while (cp->cp_cpcr & CPM_CR_FLG); + } + spin_unlock(&cep->lock); + } + + /* Check for receive busy, i.e. packets coming but no place to + * put them. This "can't happen" because the receive interrupt + * is tossing previous frames. + */ + if (int_events & SCCE_ENET_BSY) { + cep->stats.rx_dropped++; + printk("SCC ENET: BSY can't happen.\n"); + } + + return IRQ_HANDLED; +} + +/* During a receive, the cur_rx points to the current incoming buffer. + * When we update through the ring, if the next incoming buffer has + * not been given to the system, we just set the empty indicator, + * effectively tossing the packet. + */ +static int +scc_enet_rx(struct net_device *dev) +{ + struct scc_enet_private *cep; + volatile cbd_t *bdp; + struct sk_buff *skb; + ushort pkt_len; + + cep = (struct scc_enet_private *)dev->priv; + + /* First, grab all of the stats for the incoming packet. + * These get messed up if we get called due to a busy condition. + */ + bdp = cep->cur_rx; + +for (;;) { + if (bdp->cbd_sc & BD_ENET_RX_EMPTY) + break; + +#ifndef final_version + /* Since we have allocated space to hold a complete frame, both + * the first and last indicators should be set. + */ + if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) != + (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) + printk("CPM ENET: rcv is not first+last\n"); +#endif + + /* Frame too long or too short. + */ + if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) + cep->stats.rx_length_errors++; + if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */ + cep->stats.rx_frame_errors++; + if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */ + cep->stats.rx_crc_errors++; + if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */ + cep->stats.rx_crc_errors++; + + /* Report late collisions as a frame error. + * On this error, the BD is closed, but we don't know what we + * have in the buffer. So, just drop this frame on the floor. + */ + if (bdp->cbd_sc & BD_ENET_RX_CL) { + cep->stats.rx_frame_errors++; + } + else { + + /* Process the incoming frame. + */ + cep->stats.rx_packets++; + pkt_len = bdp->cbd_datlen; + cep->stats.rx_bytes += pkt_len; + + /* This does 16 byte alignment, much more than we need. + * The packet length includes FCS, but we don't want to + * include that when passing upstream as it messes up + * bridging applications. + */ + skb = dev_alloc_skb(pkt_len-4); + + if (skb == NULL) { + printk("%s: Memory squeeze, dropping packet.\n", dev->name); + cep->stats.rx_dropped++; + } + else { + skb->dev = dev; + skb_put(skb,pkt_len-4); /* Make room */ + eth_copy_and_sum(skb, + (unsigned char *)__va(bdp->cbd_bufaddr), + pkt_len-4, 0); + skb->protocol=eth_type_trans(skb,dev); + netif_rx(skb); + } + } + + /* Clear the status flags for this buffer. + */ + bdp->cbd_sc &= ~BD_ENET_RX_STATS; + + /* Mark the buffer empty. + */ + bdp->cbd_sc |= BD_ENET_RX_EMPTY; + + /* Update BD pointer to next entry. + */ + if (bdp->cbd_sc & BD_ENET_RX_WRAP) + bdp = cep->rx_bd_base; + else + bdp++; + + } + cep->cur_rx = (cbd_t *)bdp; + + return 0; +} + +static int +scc_enet_close(struct net_device *dev) +{ + /* Don't know what to do yet. + */ + netif_stop_queue(dev); + + return 0; +} + +static struct net_device_stats *scc_enet_get_stats(struct net_device *dev) +{ + struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv; + + return &cep->stats; +} + +/* Set or clear the multicast filter for this adaptor. + * Skeleton taken from sunlance driver. + * The CPM Ethernet implementation allows Multicast as well as individual + * MAC address filtering. Some of the drivers check to make sure it is + * a group multicast address, and discard those that are not. I guess I + * will do the same for now, but just remove the test if you want + * individual filtering as well (do the upper net layers want or support + * this kind of feature?). + */ + +static void set_multicast_list(struct net_device *dev) +{ + struct scc_enet_private *cep; + struct dev_mc_list *dmi; + u_char *mcptr, *tdptr; + volatile scc_enet_t *ep; + int i, j; + cep = (struct scc_enet_private *)dev->priv; + + /* Get pointer to SCC area in parameter RAM. + */ + ep = (scc_enet_t *)dev->base_addr; + + if (dev->flags&IFF_PROMISC) { + + /* Log any net taps. */ + printk("%s: Promiscuous mode enabled.\n", dev->name); + cep->sccp->scc_psmr |= SCC_PSMR_PRO; + } else { + + cep->sccp->scc_psmr &= ~SCC_PSMR_PRO; + + if (dev->flags & IFF_ALLMULTI) { + /* Catch all multicast addresses, so set the + * filter to all 1's. + */ + ep->sen_gaddr1 = 0xffff; + ep->sen_gaddr2 = 0xffff; + ep->sen_gaddr3 = 0xffff; + ep->sen_gaddr4 = 0xffff; + } + else { + /* Clear filter and add the addresses in the list. + */ + ep->sen_gaddr1 = 0; + ep->sen_gaddr2 = 0; + ep->sen_gaddr3 = 0; + ep->sen_gaddr4 = 0; + + dmi = dev->mc_list; + + for (i=0; i<dev->mc_count; i++) { + + /* Only support group multicast for now. + */ + if (!(dmi->dmi_addr[0] & 1)) + continue; + + /* The address in dmi_addr is LSB first, + * and taddr is MSB first. We have to + * copy bytes MSB first from dmi_addr. + */ + mcptr = (u_char *)dmi->dmi_addr + 5; + tdptr = (u_char *)&ep->sen_taddrh; + for (j=0; j<6; j++) + *tdptr++ = *mcptr--; + + /* Ask CPM to run CRC and set bit in + * filter mask. + */ + cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE, + CPM_ENET_BLOCK, 0, + CPM_CR_SET_GADDR) | CPM_CR_FLG; + /* this delay is necessary here -- Cort */ + udelay(10); + while (cpmp->cp_cpcr & CPM_CR_FLG); + } + } + } +} + +/* Initialize the CPM Ethernet on SCC. + */ +static int __init scc_enet_init(void) +{ + struct net_device *dev; + struct scc_enet_private *cep; + int i, j, err; + uint dp_offset; + unsigned char *eap; + unsigned long mem_addr; + bd_t *bd; + volatile cbd_t *bdp; + volatile cpm_cpm2_t *cp; + volatile scc_t *sccp; + volatile scc_enet_t *ep; + volatile cpm2_map_t *immap; + volatile iop_cpm2_t *io; + + cp = cpmp; /* Get pointer to Communication Processor */ + + immap = (cpm2_map_t *)CPM_MAP_ADDR; /* and to internal registers */ + io = &immap->im_ioport; + + bd = (bd_t *)__res; + + /* Create an Ethernet device instance. + */ + dev = alloc_etherdev(sizeof(*cep)); + if (!dev) + return -ENOMEM; + + cep = dev->priv; + spin_lock_init(&cep->lock); + + /* Get pointer to SCC area in parameter RAM. + */ + ep = (scc_enet_t *)(&immap->im_dprambase[PROFF_ENET]); + + /* And another to the SCC register area. + */ + sccp = (volatile scc_t *)(&immap->im_scc[SCC_ENET]); + cep->sccp = (scc_t *)sccp; /* Keep the pointer handy */ + + /* Disable receive and transmit in case someone left it running. + */ + sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + /* Configure port C and D pins for SCC Ethernet. This + * won't work for all SCC possibilities....it will be + * board/port specific. + */ + io->iop_pparc |= + (PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK); + io->iop_pdirc &= + ~(PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK); + io->iop_psorc &= + ~(PC_ENET_RENA | PC_ENET_TXCLK | PC_ENET_RXCLK); + io->iop_psorc |= PC_ENET_CLSN; + + io->iop_ppard |= (PD_ENET_RXD | PD_ENET_TXD | PD_ENET_TENA); + io->iop_pdird |= (PD_ENET_TXD | PD_ENET_TENA); + io->iop_pdird &= ~PD_ENET_RXD; + io->iop_psord |= PD_ENET_TXD; + io->iop_psord &= ~(PD_ENET_RXD | PD_ENET_TENA); + + /* Configure Serial Interface clock routing. + * First, clear all SCC bits to zero, then set the ones we want. + */ + immap->im_cpmux.cmx_scr &= ~CMX_CLK_MASK; + immap->im_cpmux.cmx_scr |= CMX_CLK_ROUTE; + + /* Allocate space for the buffer descriptors in the DP ram. + * These are relative offsets in the DP ram address space. + * Initialize base addresses for the buffer descriptors. + */ + dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8); + ep->sen_genscc.scc_rbase = dp_offset; + cep->rx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset); + + dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8); + ep->sen_genscc.scc_tbase = dp_offset; + cep->tx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset); + + cep->dirty_tx = cep->cur_tx = cep->tx_bd_base; + cep->cur_rx = cep->rx_bd_base; + + ep->sen_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB; + ep->sen_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB; + + /* Set maximum bytes per receive buffer. + * This appears to be an Ethernet frame size, not the buffer + * fragment size. It must be a multiple of four. + */ + ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE; + + /* Set CRC preset and mask. + */ + ep->sen_cpres = 0xffffffff; + ep->sen_cmask = 0xdebb20e3; + + ep->sen_crcec = 0; /* CRC Error counter */ + ep->sen_alec = 0; /* alignment error counter */ + ep->sen_disfc = 0; /* discard frame counter */ + + ep->sen_pads = 0x8888; /* Tx short frame pad character */ + ep->sen_retlim = 15; /* Retry limit threshold */ + + ep->sen_maxflr = PKT_MAXBUF_SIZE; /* maximum frame length register */ + ep->sen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */ + + ep->sen_maxd1 = PKT_MAXBLR_SIZE; /* maximum DMA1 length */ + ep->sen_maxd2 = PKT_MAXBLR_SIZE; /* maximum DMA2 length */ + + /* Clear hash tables. + */ + ep->sen_gaddr1 = 0; + ep->sen_gaddr2 = 0; + ep->sen_gaddr3 = 0; + ep->sen_gaddr4 = 0; + ep->sen_iaddr1 = 0; + ep->sen_iaddr2 = 0; + ep->sen_iaddr3 = 0; + ep->sen_iaddr4 = 0; + + /* Set Ethernet station address. + * + * This is supplied in the board information structure, so we + * copy that into the controller. + */ + eap = (unsigned char *)&(ep->sen_paddrh); + for (i=5; i>=0; i--) + *eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i]; + + ep->sen_pper = 0; /* 'cause the book says so */ + ep->sen_taddrl = 0; /* temp address (LSB) */ + ep->sen_taddrm = 0; + ep->sen_taddrh = 0; /* temp address (MSB) */ + + /* Now allocate the host memory pages and initialize the + * buffer descriptors. + */ + bdp = cep->tx_bd_base; + for (i=0; i<TX_RING_SIZE; i++) { + + /* Initialize the BD for every fragment in the page. + */ + bdp->cbd_sc = 0; + bdp->cbd_bufaddr = 0; + bdp++; + } + + /* Set the last buffer to wrap. + */ + bdp--; + bdp->cbd_sc |= BD_SC_WRAP; + + bdp = cep->rx_bd_base; + for (i=0; i<CPM_ENET_RX_PAGES; i++) { + + /* Allocate a page. + */ + mem_addr = __get_free_page(GFP_KERNEL); + /* BUG: no check for failure */ + + /* Initialize the BD for every fragment in the page. + */ + for (j=0; j<CPM_ENET_RX_FRPPG; j++) { + bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR; + bdp->cbd_bufaddr = __pa(mem_addr); + mem_addr += CPM_ENET_RX_FRSIZE; + bdp++; + } + } + + /* Set the last buffer to wrap. + */ + bdp--; + bdp->cbd_sc |= BD_SC_WRAP; + + /* Let's re-initialize the channel now. We have to do it later + * than the manual describes because we have just now finished + * the BD initialization. + */ + cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0, + CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cpcr & CPM_CR_FLG); + + cep->skb_cur = cep->skb_dirty = 0; + + sccp->scc_scce = 0xffff; /* Clear any pending events */ + + /* Enable interrupts for transmit error, complete frame + * received, and any transmit buffer we have also set the + * interrupt flag. + */ + sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB); + + /* Install our interrupt handler. + */ + request_irq(SIU_INT_ENET, scc_enet_interrupt, 0, "enet", dev); + /* BUG: no check for failure */ + + /* Set GSMR_H to enable all normal operating modes. + * Set GSMR_L to enable Ethernet to MC68160. + */ + sccp->scc_gsmrh = 0; + sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET); + + /* Set sync/delimiters. + */ + sccp->scc_dsr = 0xd555; + + /* Set processing mode. Use Ethernet CRC, catch broadcast, and + * start frame search 22 bit times after RENA. + */ + sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22); + + /* It is now OK to enable the Ethernet transmitter. + * Unfortunately, there are board implementation differences here. + */ + io->iop_pparc &= ~(PC_EST8260_ENET_LOOPBACK | + PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD); + io->iop_psorc &= ~(PC_EST8260_ENET_LOOPBACK | + PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD); + io->iop_pdirc |= (PC_EST8260_ENET_LOOPBACK | + PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD); + io->iop_pdatc &= ~(PC_EST8260_ENET_LOOPBACK | PC_EST8260_ENET_SQE); + io->iop_pdatc |= PC_EST8260_ENET_NOTFD; + + dev->base_addr = (unsigned long)ep; + + /* The CPM Ethernet specific entries in the device structure. */ + dev->open = scc_enet_open; + dev->hard_start_xmit = scc_enet_start_xmit; + dev->tx_timeout = scc_enet_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + dev->stop = scc_enet_close; + dev->get_stats = scc_enet_get_stats; + dev->set_multicast_list = set_multicast_list; + + /* And last, enable the transmit and receive processing. + */ + sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + err = register_netdev(dev); + if (err) { + free_netdev(dev); + return err; + } + + printk("%s: SCC ENET Version 0.1, ", dev->name); + for (i=0; i<5; i++) + printk("%02x:", dev->dev_addr[i]); + printk("%02x\n", dev->dev_addr[5]); + + return 0; +} + +module_init(scc_enet_init); |