summaryrefslogtreecommitdiffstats
path: root/arch/ppc/boot/simple/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/boot/simple/pci.c')
-rw-r--r--arch/ppc/boot/simple/pci.c274
1 files changed, 274 insertions, 0 deletions
diff --git a/arch/ppc/boot/simple/pci.c b/arch/ppc/boot/simple/pci.c
new file mode 100644
index 00000000000..b0f673c8b7d
--- /dev/null
+++ b/arch/ppc/boot/simple/pci.c
@@ -0,0 +1,274 @@
+/* Stand alone funtions for QSpan Tundra support.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/mpc8xx.h>
+
+extern void puthex(unsigned long val);
+extern void puts(const char *);
+
+/* To map PCI devices, you first write 0xffffffff into the device
+ * base address registers. When the register is read back, the
+ * number of most significant '1' bits describes the amount of address
+ * space needed for mapping. If the most significant bit is not set,
+ * either the device does not use that address register, or it has
+ * a fixed address that we can't change. After the address is assigned,
+ * the command register has to be written to enable the card.
+ */
+typedef struct {
+ u_char pci_bus;
+ u_char pci_devfn;
+ ushort pci_command;
+ uint pci_addrs[6];
+} pci_map_t;
+
+/* We should probably dynamically allocate these structures.
+*/
+#define MAX_PCI_DEVS 32
+int pci_dev_cnt;
+pci_map_t pci_map[MAX_PCI_DEVS];
+
+void pci_conf_write(int bus, int device, int func, int reg, uint writeval);
+void pci_conf_read(int bus, int device, int func, int reg, void *readval);
+void probe_addresses(int bus, int devfn);
+void map_pci_addrs(void);
+
+extern int
+qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
+ unsigned char offset, unsigned char *val);
+extern int
+qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
+ unsigned char offset, unsigned short *val);
+extern int
+qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
+ unsigned char offset, unsigned int *val);
+extern int
+qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
+ unsigned char offset, unsigned char val);
+extern int
+qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
+ unsigned char offset, unsigned short val);
+extern int
+qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
+ unsigned char offset, unsigned int val);
+
+
+/* This is a really stripped version of PCI bus scan. All we are
+ * looking for are devices that exist.
+ */
+void
+pci_scanner(int addr_probe)
+{
+ unsigned int devfn, l, class, bus_number;
+ unsigned char hdr_type, is_multi;
+
+ is_multi = 0;
+ bus_number = 0;
+ for (devfn = 0; devfn < 0xff; ++devfn) {
+ /* The device numbers are comprised of upper 5 bits of
+ * device number and lower 3 bits of multi-function number.
+ */
+ if ((devfn & 7) && !is_multi) {
+ /* Don't scan multifunction addresses if this is
+ * not a multifunction device.
+ */
+ continue;
+ }
+
+ /* Read the header to determine card type.
+ */
+ qs_pci_read_config_byte(bus_number, devfn, PCI_HEADER_TYPE,
+ &hdr_type);
+
+ /* If this is a base device number, check the header to
+ * determine if it is mulifunction.
+ */
+ if ((devfn & 7) == 0)
+ is_multi = hdr_type & 0x80;
+
+ /* Check to see if the board is really in the slot.
+ */
+ qs_pci_read_config_dword(bus_number, devfn, PCI_VENDOR_ID, &l);
+ /* some broken boards return 0 if a slot is empty: */
+ if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff ||
+ l == 0xffff0000) {
+ /* Nothing there.
+ */
+ is_multi = 0;
+ continue;
+ }
+
+ /* If we are not performing an address probe,
+ * just simply print out some information.
+ */
+ if (!addr_probe) {
+ qs_pci_read_config_dword(bus_number, devfn,
+ PCI_CLASS_REVISION, &class);
+
+ class >>= 8; /* upper 3 bytes */
+
+#if 0
+ printf("Found (%3d:%d): vendor 0x%04x, device 0x%04x, class 0x%06x\n",
+ (devfn >> 3), (devfn & 7),
+ (l & 0xffff), (l >> 16) & 0xffff, class);
+#else
+ puts("Found ("); puthex(devfn >> 3);
+ puts(":"); puthex(devfn & 7);
+ puts("): vendor "); puthex(l & 0xffff);
+ puts(", device "); puthex((l >> 16) & 0xffff);
+ puts(", class "); puthex(class); puts("\n");
+#endif
+ }
+ else {
+ /* If this is a "normal" device, build address list.
+ */
+ if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_NORMAL)
+ probe_addresses(bus_number, devfn);
+ }
+ }
+
+ /* Now map the boards.
+ */
+ if (addr_probe)
+ map_pci_addrs();
+}
+
+/* Probe addresses for the specified device. This is a destructive
+ * operation because it writes the registers.
+ */
+void
+probe_addresses(bus, devfn)
+{
+ int i;
+ uint pciaddr;
+ ushort pcicmd;
+ pci_map_t *pm;
+
+ if (pci_dev_cnt >= MAX_PCI_DEVS) {
+ puts("Too many PCI devices\n");
+ return;
+ }
+
+ pm = &pci_map[pci_dev_cnt++];
+
+ pm->pci_bus = bus;
+ pm->pci_devfn = devfn;
+
+ for (i=0; i<6; i++) {
+ qs_pci_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4), -1);
+ qs_pci_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4),
+ &pciaddr);
+ pm->pci_addrs[i] = pciaddr;
+ qs_pci_read_config_word(bus, devfn, PCI_COMMAND, &pcicmd);
+ pm->pci_command = pcicmd;
+ }
+}
+
+/* Map the cards into the PCI space. The PCI has separate memory
+ * and I/O spaces. In addition, some memory devices require mapping
+ * below 1M. The least significant 4 bits of the address register
+ * provide information. If this is an I/O device, only the LS bit
+ * is used to indicate that, so I/O devices can be mapped to a two byte
+ * boundard. Memory addresses can be mapped to a 32 byte boundary.
+ * The QSpan implementations usually have a 1Gbyte space for each
+ * memory and I/O spaces.
+ *
+ * This isn't a terribly fancy algorithm. I just map the spaces from
+ * the top starting with the largest address space. When finished,
+ * the registers are written and the card enabled.
+ *
+ * While the Tundra can map a large address space on most boards, we
+ * need to be careful because it may overlap other devices (like IMMR).
+ */
+#define MEMORY_SPACE_SIZE 0x20000000
+#define IO_SPACE_SIZE 0x20000000
+
+void
+map_pci_addrs()
+{
+ uint pci_mem_top, pci_mem_low;
+ uint pci_io_top;
+ uint addr_mask, reg_addr, space;
+ int i, j;
+ pci_map_t *pm;
+
+ pci_mem_top = MEMORY_SPACE_SIZE;
+ pci_io_top = IO_SPACE_SIZE;
+ pci_mem_low = (1 * 1024 * 1024); /* Below one meg addresses */
+
+ /* We can't map anything more than the maximum space, but test
+ * for it anyway to catch devices out of range.
+ */
+ addr_mask = 0x80000000;
+
+ do {
+ space = (~addr_mask) + 1; /* Size of the space */
+ for (i=0; i<pci_dev_cnt; i++) {
+ pm = &pci_map[i];
+ for (j=0; j<6; j++) {
+ /* If the MS bit is not set, this has either
+ * already been mapped, or is not used.
+ */
+ reg_addr = pm->pci_addrs[j];
+ if ((reg_addr & 0x80000000) == 0)
+ continue;
+ if (reg_addr & PCI_BASE_ADDRESS_SPACE_IO) {
+ if ((reg_addr & PCI_BASE_ADDRESS_IO_MASK) != addr_mask)
+ continue;
+ if (pci_io_top < space) {
+ puts("Out of PCI I/O space\n");
+ }
+ else {
+ pci_io_top -= space;
+ pm->pci_addrs[j] = pci_io_top;
+ pm->pci_command |= PCI_COMMAND_IO;
+ }
+ }
+ else {
+ if ((reg_addr & PCI_BASE_ADDRESS_MEM_MASK) != addr_mask)
+ continue;
+
+ /* Memory space. Test if below 1M.
+ */
+ if (reg_addr & PCI_BASE_ADDRESS_MEM_TYPE_1M) {
+ if (pci_mem_low < space) {
+ puts("Out of PCI 1M space\n");
+ }
+ else {
+ pci_mem_low -= space;
+ pm->pci_addrs[j] = pci_mem_low;
+ }
+ }
+ else {
+ if (pci_mem_top < space) {
+ puts("Out of PCI Mem space\n");
+ }
+ else {
+ pci_mem_top -= space;
+ pm->pci_addrs[j] = pci_mem_top;
+ }
+ }
+ pm->pci_command |= PCI_COMMAND_MEMORY;
+ }
+ }
+ }
+ addr_mask >>= 1;
+ addr_mask |= 0x80000000;
+ } while (addr_mask != 0xfffffffe);
+
+ /* Now, run the list one more time and map everything.
+ */
+ for (i=0; i<pci_dev_cnt; i++) {
+ pm = &pci_map[i];
+ for (j=0; j<6; j++) {
+ qs_pci_write_config_dword(pm->pci_bus, pm->pci_devfn,
+ PCI_BASE_ADDRESS_0 + (j * 4), pm->pci_addrs[j]);
+ }
+
+ /* Enable memory or address mapping.
+ */
+ qs_pci_write_config_word(pm->pci_bus, pm->pci_devfn, PCI_COMMAND,
+ pm->pci_command);
+ }
+}
+
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-12 20:04:31 +0000