diff options
Diffstat (limited to 'arch/ppc/math-emu/op-4.h')
| -rw-r--r-- | arch/ppc/math-emu/op-4.h | 297 |
1 files changed, 297 insertions, 0 deletions
diff --git a/arch/ppc/math-emu/op-4.h b/arch/ppc/math-emu/op-4.h new file mode 100644 index 00000000000..fcdd6d064c5 --- /dev/null +++ b/arch/ppc/math-emu/op-4.h @@ -0,0 +1,297 @@ +/* + * Basic four-word fraction declaration and manipulation. + * + * When adding quadword support for 32 bit machines, we need + * to be a little careful as double multiply uses some of these + * macros: (in op-2.h) + * _FP_MUL_MEAT_2_wide() uses _FP_FRAC_DECL_4, _FP_FRAC_WORD_4, + * _FP_FRAC_ADD_4, _FP_FRAC_SRS_4 + * _FP_MUL_MEAT_2_gmp() uses _FP_FRAC_SRS_4 (and should use + * _FP_FRAC_DECL_4: it appears to be broken and is not used + * anywhere anyway. ) + * + * I've now fixed all the macros that were here from the sparc64 code. + * [*none* of the shift macros were correct!] -- PMM 02/1998 + * + * The only quadword stuff that remains to be coded is: + * 1) the conversion to/from ints, which requires + * that we check (in op-common.h) that the following do the right thing + * for quadwords: _FP_TO_INT(Q,4,r,X,rsz,rsg), _FP_FROM_INT(Q,4,X,r,rs,rt) + * 2) multiply, divide and sqrt, which require: + * _FP_MUL_MEAT_4_*(R,X,Y), _FP_DIV_MEAT_4_*(R,X,Y), _FP_SQRT_MEAT_4(R,S,T,X,q), + * This also needs _FP_MUL_MEAT_Q and _FP_DIV_MEAT_Q to be defined to + * some suitable _FP_MUL_MEAT_4_* macros in sfp-machine.h. + * [we're free to choose whatever FP_MUL_MEAT_4_* macros we need for + * these; they are used nowhere else. ] + */ + +#define _FP_FRAC_DECL_4(X) _FP_W_TYPE X##_f[4] +#define _FP_FRAC_COPY_4(D,S) \ + (D##_f[0] = S##_f[0], D##_f[1] = S##_f[1], \ + D##_f[2] = S##_f[2], D##_f[3] = S##_f[3]) +/* The _FP_FRAC_SET_n(X,I) macro is intended for use with another + * macro such as _FP_ZEROFRAC_n which returns n comma separated values. + * The result is that we get an expansion of __FP_FRAC_SET_n(X,I0,I1,I2,I3) + * which just assigns the In values to the array X##_f[]. + * This is why the number of parameters doesn't appear to match + * at first glance... -- PMM + */ +#define _FP_FRAC_SET_4(X,I) __FP_FRAC_SET_4(X, I) +#define _FP_FRAC_HIGH_4(X) (X##_f[3]) +#define _FP_FRAC_LOW_4(X) (X##_f[0]) +#define _FP_FRAC_WORD_4(X,w) (X##_f[w]) + +#define _FP_FRAC_SLL_4(X,N) \ + do { \ + _FP_I_TYPE _up, _down, _skip, _i; \ + _skip = (N) / _FP_W_TYPE_SIZE; \ + _up = (N) % _FP_W_TYPE_SIZE; \ + _down = _FP_W_TYPE_SIZE - _up; \ + for (_i = 3; _i > _skip; --_i) \ + X##_f[_i] = X##_f[_i-_skip] << _up | X##_f[_i-_skip-1] >> _down; \ +/* bugfixed: was X##_f[_i] <<= _up; -- PMM 02/1998 */ \ + X##_f[_i] = X##_f[0] << _up; \ + for (--_i; _i >= 0; --_i) \ + X##_f[_i] = 0; \ + } while (0) + +/* This one was broken too */ +#define _FP_FRAC_SRL_4(X,N) \ + do { \ + _FP_I_TYPE _up, _down, _skip, _i; \ + _skip = (N) / _FP_W_TYPE_SIZE; \ + _down = (N) % _FP_W_TYPE_SIZE; \ + _up = _FP_W_TYPE_SIZE - _down; \ + for (_i = 0; _i < 3-_skip; ++_i) \ + X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up; \ + X##_f[_i] = X##_f[3] >> _down; \ + for (++_i; _i < 4; ++_i) \ + X##_f[_i] = 0; \ + } while (0) + + +/* Right shift with sticky-lsb. + * What this actually means is that we do a standard right-shift, + * but that if any of the bits that fall off the right hand side + * were one then we always set the LSbit. + */ +#define _FP_FRAC_SRS_4(X,N,size) \ + do { \ + _FP_I_TYPE _up, _down, _skip, _i; \ + _FP_W_TYPE _s; \ + _skip = (N) / _FP_W_TYPE_SIZE; \ + _down = (N) % _FP_W_TYPE_SIZE; \ + _up = _FP_W_TYPE_SIZE - _down; \ + for (_s = _i = 0; _i < _skip; ++_i) \ + _s |= X##_f[_i]; \ + _s |= X##_f[_i] << _up; \ +/* s is now != 0 if we want to set the LSbit */ \ + for (_i = 0; _i < 3-_skip; ++_i) \ + X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up; \ + X##_f[_i] = X##_f[3] >> _down; \ + for (++_i; _i < 4; ++_i) \ + X##_f[_i] = 0; \ + /* don't fix the LSB until the very end when we're sure f[0] is stable */ \ + X##_f[0] |= (_s != 0); \ + } while (0) + +#define _FP_FRAC_ADD_4(R,X,Y) \ + __FP_FRAC_ADD_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0], \ + X##_f[3], X##_f[2], X##_f[1], X##_f[0], \ + Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0]) + +#define _FP_FRAC_SUB_4(R,X,Y) \ + __FP_FRAC_SUB_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0], \ + X##_f[3], X##_f[2], X##_f[1], X##_f[0], \ + Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0]) + +#define _FP_FRAC_ADDI_4(X,I) \ + __FP_FRAC_ADDI_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0], I) + +#define _FP_ZEROFRAC_4 0,0,0,0 +#define _FP_MINFRAC_4 0,0,0,1 + +#define _FP_FRAC_ZEROP_4(X) ((X##_f[0] | X##_f[1] | X##_f[2] | X##_f[3]) == 0) +#define _FP_FRAC_NEGP_4(X) ((_FP_WS_TYPE)X##_f[3] < 0) +#define _FP_FRAC_OVERP_4(fs,X) (X##_f[0] & _FP_OVERFLOW_##fs) + +#define _FP_FRAC_EQ_4(X,Y) \ + (X##_f[0] == Y##_f[0] && X##_f[1] == Y##_f[1] \ + && X##_f[2] == Y##_f[2] && X##_f[3] == Y##_f[3]) + +#define _FP_FRAC_GT_4(X,Y) \ + (X##_f[3] > Y##_f[3] || \ + (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] || \ + (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] || \ + (X##_f[1] == Y##_f[1] && X##_f[0] > Y##_f[0]) \ + )) \ + )) \ + ) + +#define _FP_FRAC_GE_4(X,Y) \ + (X##_f[3] > Y##_f[3] || \ + (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] || \ + (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] || \ + (X##_f[1] == Y##_f[1] && X##_f[0] >= Y##_f[0]) \ + )) \ + )) \ + ) + + +#define _FP_FRAC_CLZ_4(R,X) \ + do { \ + if (X##_f[3]) \ + { \ + __FP_CLZ(R,X##_f[3]); \ + } \ + else if (X##_f[2]) \ + { \ + __FP_CLZ(R,X##_f[2]); \ + R += _FP_W_TYPE_SIZE; \ + } \ + else if (X##_f[1]) \ + { \ + __FP_CLZ(R,X##_f[2]); \ + R += _FP_W_TYPE_SIZE*2; \ + } \ + else \ + { \ + __FP_CLZ(R,X##_f[0]); \ + R += _FP_W_TYPE_SIZE*3; \ + } \ + } while(0) + + +#define _FP_UNPACK_RAW_4(fs, X, val) \ + do { \ + union _FP_UNION_##fs _flo; _flo.flt = (val); \ + X##_f[0] = _flo.bits.frac0; \ + X##_f[1] = _flo.bits.frac1; \ + X##_f[2] = _flo.bits.frac2; \ + X##_f[3] = _flo.bits.frac3; \ + X##_e = _flo.bits.exp; \ + X##_s = _flo.bits.sign; \ + } while (0) + +#define _FP_PACK_RAW_4(fs, val, X) \ + do { \ + union _FP_UNION_##fs _flo; \ + _flo.bits.frac0 = X##_f[0]; \ + _flo.bits.frac1 = X##_f[1]; \ + _flo.bits.frac2 = X##_f[2]; \ + _flo.bits.frac3 = X##_f[3]; \ + _flo.bits.exp = X##_e; \ + _flo.bits.sign = X##_s; \ + (val) = _flo.flt; \ + } while (0) + + +/* + * Internals + */ + +#define __FP_FRAC_SET_4(X,I3,I2,I1,I0) \ + (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0) + +#ifndef __FP_FRAC_ADD_4 +#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ + (r0 = x0 + y0, \ + r1 = x1 + y1 + (r0 < x0), \ + r2 = x2 + y2 + (r1 < x1), \ + r3 = x3 + y3 + (r2 < x2)) +#endif + +#ifndef __FP_FRAC_SUB_4 +#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ + (r0 = x0 - y0, \ + r1 = x1 - y1 - (r0 > x0), \ + r2 = x2 - y2 - (r1 > x1), \ + r3 = x3 - y3 - (r2 > x2)) +#endif + +#ifndef __FP_FRAC_ADDI_4 +/* I always wanted to be a lisp programmer :-> */ +#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i) \ + (x3 += ((x2 += ((x1 += ((x0 += i) < x0)) < x1) < x2))) +#endif + +/* Convert FP values between word sizes. This appears to be more + * complicated than I'd have expected it to be, so these might be + * wrong... These macros are in any case somewhat bogus because they + * use information about what various FRAC_n variables look like + * internally [eg, that 2 word vars are X_f0 and x_f1]. But so do + * the ones in op-2.h and op-1.h. + */ +#define _FP_FRAC_CONV_1_4(dfs, sfs, D, S) \ + do { \ + _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs), \ + _FP_WFRACBITS_##sfs); \ + D##_f = S##_f[0]; \ + } while (0) + +#define _FP_FRAC_CONV_2_4(dfs, sfs, D, S) \ + do { \ + _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs), \ + _FP_WFRACBITS_##sfs); \ + D##_f0 = S##_f[0]; \ + D##_f1 = S##_f[1]; \ + } while (0) + +/* Assembly/disassembly for converting to/from integral types. + * No shifting or overflow handled here. + */ +/* Put the FP value X into r, which is an integer of size rsize. */ +#define _FP_FRAC_ASSEMBLE_4(r, X, rsize) \ + do { \ + if (rsize <= _FP_W_TYPE_SIZE) \ + r = X##_f[0]; \ + else if (rsize <= 2*_FP_W_TYPE_SIZE) \ + { \ + r = X##_f[1]; \ + r <<= _FP_W_TYPE_SIZE; \ + r += X##_f[0]; \ + } \ + else \ + { \ + /* I'm feeling lazy so we deal with int == 3words (implausible)*/ \ + /* and int == 4words as a single case. */ \ + r = X##_f[3]; \ + r <<= _FP_W_TYPE_SIZE; \ + r += X##_f[2]; \ + r <<= _FP_W_TYPE_SIZE; \ + r += X##_f[1]; \ + r <<= _FP_W_TYPE_SIZE; \ + r += X##_f[0]; \ + } \ + } while (0) + +/* "No disassemble Number Five!" */ +/* move an integer of size rsize into X's fractional part. We rely on + * the _f[] array consisting of words of size _FP_W_TYPE_SIZE to avoid + * having to mask the values we store into it. + */ +#define _FP_FRAC_DISASSEMBLE_4(X, r, rsize) \ + do { \ + X##_f[0] = r; \ + X##_f[1] = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE); \ + X##_f[2] = (rsize <= 2*_FP_W_TYPE_SIZE ? 0 : r >> 2*_FP_W_TYPE_SIZE); \ + X##_f[3] = (rsize <= 3*_FP_W_TYPE_SIZE ? 0 : r >> 3*_FP_W_TYPE_SIZE); \ + } while (0) + +#define _FP_FRAC_CONV_4_1(dfs, sfs, D, S) \ + do { \ + D##_f[0] = S##_f; \ + D##_f[1] = D##_f[2] = D##_f[3] = 0; \ + _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs)); \ + } while (0) + +#define _FP_FRAC_CONV_4_2(dfs, sfs, D, S) \ + do { \ + D##_f[0] = S##_f0; \ + D##_f[1] = S##_f1; \ + D##_f[2] = D##_f[3] = 0; \ + _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs)); \ + } while (0) + +/* FIXME! This has to be written */ +#define _FP_SQRT_MEAT_4(R, S, T, X, q) |