diff options
Diffstat (limited to 'arch/ppc/mm/fsl_booke_mmu.c')
| -rw-r--r-- | arch/ppc/mm/fsl_booke_mmu.c | 236 |
1 files changed, 0 insertions, 236 deletions
diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c deleted file mode 100644 index 123da03ab11..00000000000 --- a/arch/ppc/mm/fsl_booke_mmu.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Modifications by Kumar Gala (galak@kernel.crashing.org) to support - * E500 Book E processors. - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This file contains the routines for initializing the MMU - * on the 4xx series of chips. - * -- paulus - * - * Derived from arch/ppc/mm/init.c: - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) - * and Cort Dougan (PReP) (cort@cs.nmt.edu) - * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * Derived from "arch/i386/mm/init.c" - * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/stddef.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/highmem.h> - -#include <asm/pgalloc.h> -#include <asm/prom.h> -#include <asm/io.h> -#include <asm/mmu_context.h> -#include <asm/pgtable.h> -#include <asm/mmu.h> -#include <asm/uaccess.h> -#include <asm/smp.h> -#include <asm/bootx.h> -#include <asm/machdep.h> -#include <asm/setup.h> - -extern void loadcam_entry(unsigned int index); -unsigned int tlbcam_index; -unsigned int num_tlbcam_entries; -static unsigned long __cam0, __cam1, __cam2; -extern unsigned long total_lowmem; -extern unsigned long __max_low_memory; -#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE - -#define NUM_TLBCAMS (16) - -struct tlbcam { - u32 MAS0; - u32 MAS1; - u32 MAS2; - u32 MAS3; - u32 MAS7; -} TLBCAM[NUM_TLBCAMS]; - -struct tlbcamrange { - unsigned long start; - unsigned long limit; - phys_addr_t phys; -} tlbcam_addrs[NUM_TLBCAMS]; - -extern unsigned int tlbcam_index; - -/* - * Return PA for this VA if it is mapped by a CAM, or 0 - */ -unsigned long v_mapped_by_tlbcam(unsigned long va) -{ - int b; - for (b = 0; b < tlbcam_index; ++b) - if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit) - return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start); - return 0; -} - -/* - * Return VA for a given PA or 0 if not mapped - */ -unsigned long p_mapped_by_tlbcam(unsigned long pa) -{ - int b; - for (b = 0; b < tlbcam_index; ++b) - if (pa >= tlbcam_addrs[b].phys - && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start) - +tlbcam_addrs[b].phys) - return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys); - return 0; -} - -/* - * Set up one of the I/D BAT (block address translation) register pairs. - * The parameters are not checked; in particular size must be a power - * of 4 between 4k and 256M. - */ -void settlbcam(int index, unsigned long virt, phys_addr_t phys, - unsigned int size, int flags, unsigned int pid) -{ - unsigned int tsize, lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size)); - tsize = (21 - lz) / 2; - -#ifdef CONFIG_SMP - if ((flags & _PAGE_NO_CACHE) == 0) - flags |= _PAGE_COHERENT; -#endif - - TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1); - TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid); - TLBCAM[index].MAS2 = virt & PAGE_MASK; - - TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0; - - TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0); - -#ifndef CONFIG_KGDB /* want user access for breakpoints */ - if (flags & _PAGE_USER) { - TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); - } -#else - TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); -#endif - - tlbcam_addrs[index].start = virt; - tlbcam_addrs[index].limit = virt + size - 1; - tlbcam_addrs[index].phys = phys; - - loadcam_entry(index); -} - -void invalidate_tlbcam_entry(int index) -{ - TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index); - TLBCAM[index].MAS1 = ~MAS1_VALID; - - loadcam_entry(index); -} - -void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1, - unsigned long cam2) -{ - settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0); - tlbcam_index++; - if (cam1) { - tlbcam_index++; - settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0); - } - if (cam2) { - tlbcam_index++; - settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0); - } -} - -/* - * MMU_init_hw does the chip-specific initialization of the MMU hardware. - */ -void __init MMU_init_hw(void) -{ - flush_instruction_cache(); -} - -unsigned long __init mmu_mapin_ram(void) -{ - cam_mapin_ram(__cam0, __cam1, __cam2); - - return __cam0 + __cam1 + __cam2; -} - - -void __init -adjust_total_lowmem(void) -{ - unsigned long max_low_mem = MAX_LOW_MEM; - unsigned long cam_max = 0x10000000; - unsigned long ram; - - /* adjust CAM size to max_low_mem */ - if (max_low_mem < cam_max) - cam_max = max_low_mem; - - /* adjust lowmem size to max_low_mem */ - if (max_low_mem < total_lowmem) - ram = max_low_mem; - else - ram = total_lowmem; - - /* Calculate CAM values */ - __cam0 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam0 > cam_max) - __cam0 = cam_max; - ram -= __cam0; - if (ram) { - __cam1 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam1 > cam_max) - __cam1 = cam_max; - ram -= __cam1; - } - if (ram) { - __cam2 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam2 > cam_max) - __cam2 = cam_max; - ram -= __cam2; - } - - printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb," - " CAM2=%ldMb residual: %ldMb\n", - __cam0 >> 20, __cam1 >> 20, __cam2 >> 20, - (total_lowmem - __cam0 - __cam1 - __cam2) >> 20); - __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2; -} |