diff options
Diffstat (limited to 'arch/ppc/platforms/4xx/ibmnp405h.h')
| -rw-r--r-- | arch/ppc/platforms/4xx/ibmnp405h.h | 154 |
1 files changed, 0 insertions, 154 deletions
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h deleted file mode 100644 index 08a6a779190..00000000000 --- a/arch/ppc/platforms/4xx/ibmnp405h.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Author: Armin Kuster <akuster@mvista.com> - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_IBMNP405H_H__ -#define __ASM_IBMNP405H_H__ - - -/* ibm405.h at bottom of this file */ - -#define PPC405_PCI_CONFIG_ADDR 0xeec00000 -#define PPC405_PCI_CONFIG_DATA 0xeec00004 -#define PPC405_PCI_PHY_MEM_BASE 0x80000000 /* hose_a->pci_mem_offset */ - /* setbat */ -#define PPC405_PCI_MEM_BASE PPC405_PCI_PHY_MEM_BASE /* setbat */ -#define PPC405_PCI_PHY_IO_BASE 0xe8000000 /* setbat */ -#define PPC405_PCI_IO_BASE PPC405_PCI_PHY_IO_BASE /* setbat */ - -#define PPC405_PCI_LOWER_MEM 0x00000000 /* hose_a->mem_space.start */ -#define PPC405_PCI_UPPER_MEM 0xBfffffff /* hose_a->mem_space.end */ -#define PPC405_PCI_LOWER_IO 0x00000000 /* hose_a->io_space.start */ -#define PPC405_PCI_UPPER_IO 0x0000ffff /* hose_a->io_space.end */ - -#define PPC405_ISA_IO_BASE PPC405_PCI_IO_BASE - -#define PPC4xx_PCI_IO_ADDR ((uint)PPC405_PCI_PHY_IO_BASE) -#define PPC4xx_PCI_IO_SIZE ((uint)64*1024) -#define PPC4xx_PCI_CFG_ADDR ((uint)PPC405_PCI_CONFIG_ADDR) -#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024) -#define PPC4xx_PCI_LCFG_ADDR ((uint)0xef400000) -#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024) -#define PPC4xx_ONB_IO_ADDR ((uint)0xef600000) -#define PPC4xx_ONB_IO_SIZE ((uint)4*1024) - -/* serial port defines */ -#define RS_TABLE_SIZE 4 - -#define UART0_INT 0 -#define UART1_INT 1 -#define PCIL0_BASE 0xEF400000 -#define UART0_IO_BASE 0xEF600300 -#define UART1_IO_BASE 0xEF600400 -#define OPB0_BASE 0xEF600600 -#define EMAC0_BASE 0xEF600800 - -#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i] - -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, UART##num##_INT, \ - (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base:(u8 *) UART##num##_IO_BASE, \ - io_type: SERIAL_IO_MEM}, - -#if defined(CONFIG_UART0_TTYS0) -#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE -#define SERIAL_PORT_DFNS \ - STD_UART_OP(0) \ - STD_UART_OP(1) -#endif - -#if defined(CONFIG_UART0_TTYS1) -#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE -#define SERIAL_PORT_DFNS \ - STD_UART_OP(1) \ - STD_UART_OP(0) -#endif - -/* DCR defines */ -/* ------------------------------------------------------------------------- */ - -#define DCRN_CHCR_BASE 0x0F1 -#define DCRN_CHPSR_BASE 0x0B4 -#define DCRN_CPMSR_BASE 0x0BA -#define DCRN_CPMFR_BASE 0x0B9 -#define DCRN_CPMER_BASE 0x0B8 - -/* CPM Clocking & Power Management defines */ -#define IBM_CPM_PCI 0x40000000 /* PCI */ -#define IBM_CPM_EMAC2 0x20000000 /* EMAC 2 MII */ -#define IBM_CPM_EMAC3 0x04000000 /* EMAC 3 MII */ -#define IBM_CPM_EMAC0 0x00800000 /* EMAC 0 MII */ -#define IBM_CPM_EMAC1 0x00100000 /* EMAC 1 MII */ -#define IBM_CPM_EMMII 0 /* Shift value for MII */ -#define IBM_CPM_EMRX 1 /* Shift value for recv */ -#define IBM_CPM_EMTX 2 /* Shift value for MAC */ -#define IBM_CPM_UIC1 0x00020000 /* Universal Interrupt Controller */ -#define IBM_CPM_UIC0 0x00010000 /* Universal Interrupt Controller */ -#define IBM_CPM_CPU 0x00008000 /* processor core */ -#define IBM_CPM_EBC 0x00004000 /* ROM/SRAM peripheral controller */ -#define IBM_CPM_SDRAM0 0x00002000 /* SDRAM memory controller */ -#define IBM_CPM_GPIO0 0x00001000 /* General Purpose IO (??) */ -#define IBM_CPM_HDLC 0x00000800 /* HDCL */ -#define IBM_CPM_TMRCLK 0x00000400 /* CPU timers */ -#define IBM_CPM_PLB 0x00000100 /* PLB bus arbiter */ -#define IBM_CPM_OPB 0x00000080 /* PLB to OPB bridge */ -#define IBM_CPM_DMA 0x00000040 /* DMA controller */ -#define IBM_CPM_IIC0 0x00000010 /* IIC interface */ -#define IBM_CPM_UART0 0x00000002 /* serial port 0 */ -#define IBM_CPM_UART1 0x00000001 /* serial port 1 */ -/* this is the default setting for devices put to sleep when booting */ - -#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \ - | IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB \ - | IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA \ - | IBM_CPM_EMAC0 | IBM_CPM_EMAC1 | IBM_CPM_EMAC2 \ - | IBM_CPM_EMAC3 | IBM_CPM_PCI) - -#define DCRN_DMA0_BASE 0x100 -#define DCRN_DMA1_BASE 0x108 -#define DCRN_DMA2_BASE 0x110 -#define DCRN_DMA3_BASE 0x118 -#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */ -#define DCRN_DMASR_BASE 0x120 -#define DCRN_EBC_BASE 0x012 -#define DCRN_DCP0_BASE 0x014 -#define DCRN_MAL_BASE 0x180 -#define DCRN_OCM0_BASE 0x018 -#define DCRN_PLB0_BASE 0x084 -#define DCRN_PLLMR_BASE 0x0B0 -#define DCRN_POB0_BASE 0x0A0 -#define DCRN_SDRAM0_BASE 0x010 -#define DCRN_UIC0_BASE 0x0C0 -#define DCRN_UIC1_BASE 0x0D0 -#define DCRN_CPC0_EPRCSR 0x0F3 - -#define UIC0_UIC1NC 0x00000002 - -#define CHR1_CETE 0x00000004 /* CPU external timer enable */ -#define UIC0 DCRN_UIC0_BASE -#define UIC1 DCRN_UIC1_BASE - -#undef NR_UICS -#define NR_UICS 2 - -/* EMAC DCRN's FIXME: armin */ -#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */ -#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */ -#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */ -#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */ -#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */ -#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */ -#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */ -#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */ - -#include <asm/ibm405.h> - -#endif /* __ASM_IBMNP405H_H__ */ -#endif /* __KERNEL__ */ |