diff options
Diffstat (limited to 'arch/ppc/platforms/4xx/ibmstbx25.h')
| -rw-r--r-- | arch/ppc/platforms/4xx/ibmstbx25.h | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/arch/ppc/platforms/4xx/ibmstbx25.h b/arch/ppc/platforms/4xx/ibmstbx25.h deleted file mode 100644 index 31b63343e64..00000000000 --- a/arch/ppc/platforms/4xx/ibmstbx25.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Author: Armin Kuster <akuster@mvista.com> - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_IBMSTBX25_H__ -#define __ASM_IBMSTBX25_H__ - - -/* serial port defines */ -#define STBx25xx_IO_BASE ((uint)0xe0000000) -#define PPC4xx_ONB_IO_PADDR STBx25xx_IO_BASE -#define PPC4xx_ONB_IO_VADDR ((uint)0xe0000000) -#define PPC4xx_ONB_IO_SIZE ((uint)14*64*1024) - -/* - * map STBxxxx internal i/o address (0x400x00xx) to an address - * which is below the 2GB limit... - * - * 4000 000x uart1 -> 0xe000 000x - * 4001 00xx uart2 - * 4002 00xx smart card - * 4003 000x iic - * 4004 000x uart0 - * 4005 0xxx timer - * 4006 00xx gpio - * 4007 00xx smart card - * 400b 000x iic - * 400c 000x scp - * 400d 000x modem - * 400e 000x uart2 -*/ -#define STBx25xx_MAP_IO_ADDR(a) (((uint)(a)) + (STBx25xx_IO_BASE - 0x40000000)) - -#define RS_TABLE_SIZE 3 - -#define OPB_BASE_START 0x40000000 -#define EBIU_BASE_START 0xF0100000 -#define DCR_BASE_START 0x0000 - -#ifdef __BOOTER__ -#define UART1_IO_BASE 0x40000000 -#define UART2_IO_BASE 0x40010000 -#else -#define UART1_IO_BASE 0xe0000000 -#define UART2_IO_BASE 0xe0010000 -#endif -#define SC0_BASE 0x40020000 /* smart card #0 */ -#define IIC0_BASE 0x40030000 -#ifdef __BOOTER__ -#define UART0_IO_BASE 0x40040000 -#else -#define UART0_IO_BASE 0xe0040000 -#endif -#define SCC0_BASE 0x40040000 /* Serial 0 controller IrdA */ -#define GPT0_BASE 0x40050000 /* General purpose timers */ -#define GPIO0_BASE 0x40060000 -#define SC1_BASE 0x40070000 /* smart card #1 */ -#define SCP0_BASE 0x400C0000 /* Serial Controller Port */ -#define SSP0_BASE 0x400D0000 /* Sync serial port */ - -#define IDE0_BASE 0xf0100000 -#define REDWOOD_IDE_CTRL 0xf1100000 - -#define RTCFPC_IRQ 0 -#define XPORT_IRQ 1 -#define AUD_IRQ 2 -#define AID_IRQ 3 -#define DMA0 4 -#define DMA1_IRQ 5 -#define DMA2_IRQ 6 -#define DMA3_IRQ 7 -#define SC0_IRQ 8 -#define IIC0_IRQ 9 -#define IIR0_IRQ 10 -#define GPT0_IRQ 11 -#define GPT1_IRQ 12 -#define SCP0_IRQ 13 -#define SSP0_IRQ 14 -#define GPT2_IRQ 15 /* count down timer */ -#define SC1_IRQ 16 -/* IRQ 17 - 19 external */ -#define UART0_INT 20 -#define UART1_INT 21 -#define UART2_INT 22 -#define XPTDMA_IRQ 23 -#define DCRIDE_IRQ 24 -/* IRQ 25 - 30 external */ -#define IDE0_IRQ 26 - -#define IIC_NUMS 1 -#define UART_NUMS 3 -#define IIC_OWN 0x55 -#define IIC_CLOCK 50 - -#define BD_EMAC_ADDR(e,i) bi_enetaddr[i] - -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, UART##num##_INT, \ - (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: (u8 *)UART##num##_IO_BASE, \ - io_type: SERIAL_IO_MEM}, - -#if defined(CONFIG_UART0_TTYS0) -#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE -#define SERIAL_PORT_DFNS \ - STD_UART_OP(0) \ - STD_UART_OP(1) \ - STD_UART_OP(2) -#endif - -#if defined(CONFIG_UART0_TTYS1) -#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE -#define SERIAL_PORT_DFNS \ - STD_UART_OP(1) \ - STD_UART_OP(0) \ - STD_UART_OP(2) -#endif - -#if defined(CONFIG_UART0_TTYS2) -#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE -#define SERIAL_PORT_DFNS \ - STD_UART_OP(2) \ - STD_UART_OP(0) \ - STD_UART_OP(1) -#endif - -#define DCRN_BE_BASE 0x090 -#define DCRN_DMA0_BASE 0x0C0 -#define DCRN_DMA1_BASE 0x0C8 -#define DCRN_DMA2_BASE 0x0D0 -#define DCRN_DMA3_BASE 0x0D8 -#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */ -#define DCRN_DMASR_BASE 0x0E0 -#define DCRN_PLB0_BASE 0x054 -#define DCRN_PLB1_BASE 0x064 -#define DCRN_POB0_BASE 0x0B0 -#define DCRN_SCCR_BASE 0x120 -#define DCRN_UIC0_BASE 0x040 -#define DCRN_BE_BASE 0x090 -#define DCRN_DMA0_BASE 0x0C0 -#define DCRN_DMA1_BASE 0x0C8 -#define DCRN_DMA2_BASE 0x0D0 -#define DCRN_DMA3_BASE 0x0D8 -#define DCRN_CIC_BASE 0x030 -#define DCRN_DMASR_BASE 0x0E0 -#define DCRN_EBIMC_BASE 0x070 -#define DCRN_DCRX_BASE 0x020 -#define DCRN_CPMFR_BASE 0x102 -#define DCRN_SCCR_BASE 0x120 -#define DCRN_RTCFP_BASE 0x310 - -#define UIC0 DCRN_UIC0_BASE - -#define IBM_CPM_IIC0 0x80000000 /* IIC 0 interface */ -#define IBM_CPM_CPU 0x10000000 /* PPC405B3 clock control */ -#define IBM_CPM_AUD 0x08000000 /* Audio Decoder */ -#define IBM_CPM_EBIU 0x04000000 /* External Bus Interface Unit */ -#define IBM_CPM_IRR 0x02000000 /* Infrared receiver */ -#define IBM_CPM_DMA 0x01000000 /* DMA controller */ -#define IBM_CPM_UART2 0x00200000 /* Serial Control Port */ -#define IBM_CPM_UART1 0x00100000 /* Serial 1 / Infrared */ -#define IBM_CPM_UART0 0x00080000 /* Serial 0 / 16550 */ -#define IBM_PM_DCRIDE 0x00040000 /* DCR timeout & IDE line Mode clock */ -#define IBM_CPM_SC0 0x00020000 /* Smart Card 0 */ -#define IBM_CPM_VID 0x00010000 /* reserved */ -#define IBM_CPM_SC1 0x00008000 /* Smart Card 0 */ -#define IBM_CPM_XPT0 0x00002000 /* Transport - 54 Mhz */ -#define IBM_CPM_CBS 0x00001000 /* Cross Bar Switch */ -#define IBM_CPM_GPT 0x00000800 /* GPTPWM */ -#define IBM_CPM_GPIO0 0x00000400 /* General Purpose IO 0 */ -#define IBM_CPM_DENC 0x00000200 /* Digital video Encoder */ -#define IBM_CPM_C405T 0x00000100 /* CPU timers */ -#define IBM_CPM_XPT27 0x00000080 /* Transport - 27 Mhz */ -#define IBM_CPM_UIC 0x00000040 /* Universal Interrupt Controller */ -#define IBM_CPM_RTCFPC 0x00000020 /* Realtime clock and front panel */ -#define IBM_CPM_SSP 0x00000010 /* Modem Serial Interface (SSP) */ -#define IBM_CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */ -#define DFLT_IBM4xx_PM ~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_DMA \ - | IBM_CPM_CBS | IBM_CPM_XPT0 | IBM_CPM_C405T \ - | IBM_CPM_XPT27 | IBM_CPM_UIC) - -#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */ -#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */ -/* DCRN_BESR */ -#define BESR_DSES 0x80000000 /* Data-Side Error Status */ -#define BESR_DMES 0x40000000 /* DMA Error Status */ -#define BESR_RWS 0x20000000 /* Read/Write Status */ -#define BESR_ETMASK 0x1C000000 /* Error Type */ -#define ET_PROT 0 -#define ET_PARITY 1 -#define ET_NCFG 2 -#define ET_BUSERR 4 -#define ET_BUSTO 6 - -#define CHR1_CETE 0x00800000 /* CPU external timer enable */ -#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */ - -#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */ -#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */ -#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */ -#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */ -#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */ -#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */ -#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */ -#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */ -#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */ - -#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */ -#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */ -#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */ -#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */ -#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */ -#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */ -#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */ -#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */ - -#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */ -#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */ -#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */ -#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */ -#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */ -#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */ -#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */ -#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */ -#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10) /* BRC 0 */ -#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11) /* BRC 1 */ -#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12) /* BRC 2 */ -#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13) /* BRC 3 */ -#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14) /* BRC 4 */ -#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15) /* BRC 5 */ -#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16) /* BRC 6 */ -#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17) /* BRC 7 */ -#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20) /* Bus Error Address Register */ -#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21) /* Bus Error Status Register */ -#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A) /* Bus Interfac Unit Ctrl Reg */ - -#define DCRN_RTC_FPC0_CNTL (DCRN_RTCFP_BASE + 0x00) /* RTC cntl */ -#define DCRN_RTC_FPC0_INT (DCRN_RTCFP_BASE + 0x01) /* RTC Interrupt */ -#define DCRN_RTC_FPC0_TIME (DCRN_RTCFP_BASE + 0x02) /* RTC time reg */ -#define DCRN_RTC_FPC0_ALRM (DCRN_RTCFP_BASE + 0x03) /* RTC Alarm reg */ -#define DCRN_RTC_FPC0_D1 (DCRN_RTCFP_BASE + 0x04) /* LED Data 1 */ -#define DCRN_RTC_FPC0_D2 (DCRN_RTCFP_BASE + 0x05) /* LED Data 2 */ -#define DCRN_RTC_FPC0_D3 (DCRN_RTCFP_BASE + 0x06) /* LED Data 3 */ -#define DCRN_RTC_FPC0_D4 (DCRN_RTCFP_BASE + 0x07) /* LED Data 4 */ -#define DCRN_RTC_FPC0_D5 (DCRN_RTCFP_BASE + 0x08) /* LED Data 5 */ -#define DCRN_RTC_FPC0_FCNTL (DCRN_RTCFP_BASE + 0x09) /* LED control */ -#define DCRN_RTC_FPC0_BRT (DCRN_RTCFP_BASE + 0x0A) /* Brightness cntl */ - -#include <asm/ibm405.h> - -#endif /* __ASM_IBMSTBX25_H__ */ -#endif /* __KERNEL__ */ |