1 files changed, 11 insertions, 75 deletions
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
index 049c767d33e..1a01b81cff1 100644
--- a/arch/ppc/platforms/4xx/virtex.h
+++ b/arch/ppc/platforms/4xx/virtex.h
@@ -15,85 +15,21 @@
 #ifndef __ASM_VIRTEX_H__
 #define __ASM_VIRTEX_H__
 
-#include <linux/config.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
 /* serial defines */
 
-#define RS_TABLE_SIZE  4	/* change this and add more devices below
-				   if you have more then 4 16x50 UARTs */
-
-#define BASE_BAUD		(XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
-
-/* The serial ports in the Virtex-II Pro have each I/O byte in the
- * LSByte of a word.  This means that iomem_reg_shift needs to be 2 to
- * change the byte offsets into word offsets.  In addition the base
- * addresses need to have 3 added to them to get to the LSByte.
- */
-#define STD_UART_OP(num)						 \
-	{ 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID,	 \
-		ASYNC_BOOT_AUTOCONF,		 			 \
-		.iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
-		.iomem_reg_shift = 2,					 \
-		.io_type = SERIAL_IO_MEM},
-
-#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define ML300_UART0 STD_UART_OP(0)
-#else
-#define ML300_UART0
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define ML300_UART1 STD_UART_OP(1)
-#else
-#define ML300_UART1
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define ML300_UART2 STD_UART_OP(2)
-#else
-#define ML300_UART2
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define ML300_UART3 STD_UART_OP(3)
-#else
-#define ML300_UART3
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
-#error Edit this file to add more devices.
-#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define NR_SER_PORTS	4
-#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define NR_SER_PORTS	3
-#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define NR_SER_PORTS	2
-#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define NR_SER_PORTS	1
-#else
-#define NR_SER_PORTS	0
-#endif
+#include <asm/ibm405.h>
 
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_PORT_DFNS	\
-	ML300_UART0		\
-	ML300_UART1		\
-	ML300_UART2		\
-	ML300_UART3
+/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */
+#if !defined(BASE_BAUD)
+ #define BASE_BAUD		(0) /* dummy value; not used */
 #endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_PORT_DFNS	\
-	ML300_UART1		\
-	ML300_UART0		\
-	ML300_UART2		\
-	ML300_UART3
+  
+/* Device type enumeration for platform bus definitions */
+#ifndef __ASSEMBLY__
+enum ppc_sys_devices {
+	VIRTEX_UART,
+};
 #endif
-
-#define DCRN_CPMFR_BASE	0
-
-#include <asm/ibm405.h>
-
+  
 #endif				/* __ASM_VIRTEX_H__ */
 #endif				/* __KERNEL__ */