summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/4xx/yucca.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/4xx/yucca.h')
-rw-r--r--arch/ppc/platforms/4xx/yucca.h108
1 files changed, 0 insertions, 108 deletions
diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h
deleted file mode 100644
index bc9684e66a8..00000000000
--- a/arch/ppc/platforms/4xx/yucca.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Yucca board definitions
- *
- * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter)
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_YUCCA_H__
-#define __ASM_YUCCA_H__
-
-#include <platforms/4xx/ppc440spe.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0 0xa0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE 0xffe00000
-#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0x1b0400)
-
-/* External timer clock frequency */
-#define YUCCA_TMR_CLK 25000000
-
-/*
- * FPGA registers
- */
-#define YUCCA_FPGA_REG_BASE 0x00000004e2000000ULL
-#define YUCCA_FPGA_REG_SIZE 0x24
-
-#define FPGA_REG1A 0x1a
-
-#define FPGA_REG1A_PE0_GLED 0x8000
-#define FPGA_REG1A_PE1_GLED 0x4000
-#define FPGA_REG1A_PE2_GLED 0x2000
-#define FPGA_REG1A_PE0_YLED 0x1000
-#define FPGA_REG1A_PE1_YLED 0x0800
-#define FPGA_REG1A_PE2_YLED 0x0400
-#define FPGA_REG1A_PE0_PWRON 0x0200
-#define FPGA_REG1A_PE1_PWRON 0x0100
-#define FPGA_REG1A_PE2_PWRON 0x0080
-#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040
-#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020
-#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010
-#define FPGA_REG1A_PE_SPREAD0 0x0008
-#define FPGA_REG1A_PE_SPREAD1 0x0004
-#define FPGA_REG1A_PE_SELSOURCE_0 0x0002
-#define FPGA_REG1A_PE_SELSOURCE_1 0x0001
-
-#define FPGA_REG1C 0x1c
-
-#define FPGA_REG1C_PE0_ROOTPOINT 0x8000
-#define FPGA_REG1C_PE1_ENDPOINT 0x4000
-#define FPGA_REG1C_PE2_ENDPOINT 0x2000
-#define FPGA_REG1C_PE0_PRSNT 0x1000
-#define FPGA_REG1C_PE1_PRSNT 0x0800
-#define FPGA_REG1C_PE2_PRSNT 0x0400
-#define FPGA_REG1C_PE0_WAKE 0x0080
-#define FPGA_REG1C_PE1_WAKE 0x0040
-#define FPGA_REG1C_PE2_WAKE 0x0020
-#define FPGA_REG1C_PE0_PERST 0x0010
-#define FPGA_REG1C_PE1_PERST 0x0008
-#define FPGA_REG1C_PE2_PERST 0x0004
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE 3
-
-/* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE 0xa0000200
-#define UART1_IO_BASE 0xa0000300
-#define UART2_IO_BASE 0xa0000600
-
-#define BASE_BAUD 11059200
-#define STD_UART_OP(num) \
- { 0, BASE_BAUD, 0, UART##num##_INT, \
- (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
- iomem_base: (void*)UART##num##_IO_BASE, \
- io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS \
- STD_UART_OP(0) \
- STD_UART_OP(1) \
- STD_UART_OP(2)
-
-/* PCI support */
-#define YUCCA_PCIX_LOWER_IO 0x00000000
-#define YUCCA_PCIX_UPPER_IO 0x0000ffff
-#define YUCCA_PCIX_LOWER_MEM 0x80000000
-#define YUCCA_PCIX_UPPER_MEM 0x8fffffff
-#define YUCCA_PCIE_LOWER_MEM 0x90000000
-#define YUCCA_PCIE_MEM_SIZE 0x10000000
-
-#define YUCCA_PCIX_MEM_SIZE 0x10000000
-#define YUCCA_PCIX_MEM_OFFSET 0x00000000
-#define YUCCA_PCIE_MEM_SIZE 0x10000000
-#define YUCCA_PCIE_MEM_OFFSET 0x00000000
-
-#endif /* __ASM_YUCCA_H__ */
-#endif /* __KERNEL__ */