diff options
Diffstat (limited to 'arch/ppc/platforms/chrp_setup.c')
| -rw-r--r-- | arch/ppc/platforms/chrp_setup.c | 669 |
1 files changed, 0 insertions, 669 deletions
diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c deleted file mode 100644 index f9fd3f4f8e2..00000000000 --- a/arch/ppc/platforms/chrp_setup.c +++ /dev/null @@ -1,669 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - * Adapted from 'alpha' version by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu) - */ - -/* - * bootup setup stuff.. - */ - -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/tty.h> -#include <linux/major.h> -#include <linux/interrupt.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/version.h> -#include <linux/adb.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/console.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/initrd.h> -#include <linux/module.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/prom.h> -#include <asm/gg2.h> -#include <asm/pci-bridge.h> -#include <asm/dma.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/hydra.h> -#include <asm/sections.h> -#include <asm/time.h> -#include <asm/btext.h> -#include <asm/i8259.h> -#include <asm/open_pic.h> -#include <asm/xmon.h> -#include "mem_pieces.h" - -unsigned long chrp_get_rtc_time(void); -int chrp_set_rtc_time(unsigned long nowtime); -void chrp_calibrate_decr(void); -long chrp_time_init(void); - -void chrp_find_bridges(void); -void chrp_event_scan(void); -void rtas_display_progress(char *, unsigned short); -void rtas_indicator_progress(char *, unsigned short); -void btext_progress(char *, unsigned short); - -extern int of_show_percpuinfo(struct seq_file *, int); - -int _chrp_type; -EXPORT_SYMBOL(_chrp_type); - -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include <linux/interrupt.h> (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); - -extern dev_t boot_dev; - -extern PTE *Hash, *Hash_end; -extern unsigned long Hash_size, Hash_mask; -extern int probingmem; -extern unsigned long loops_per_jiffy; -static int max_width; - -#ifdef CONFIG_SMP -extern struct smp_ops_t chrp_smp_ops; -#endif - -static const char *gg2_memtypes[4] = { - "FPM", "SDRAM", "EDO", "BEDO" -}; -static const char *gg2_cachesizes[4] = { - "256 KB", "512 KB", "1 MB", "Reserved" -}; -static const char *gg2_cachetypes[4] = { - "Asynchronous", "Reserved", "Flow-Through Synchronous", - "Pipelined Synchronous" -}; -static const char *gg2_cachemodes[4] = { - "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" -}; - -int -chrp_show_cpuinfo(struct seq_file *m) -{ - int i, sdramen; - unsigned int t; - struct device_node *root; - const char *model = ""; - - root = find_path_device("/"); - if (root) - model = get_property(root, "model", NULL); - seq_printf(m, "machine\t\t: CHRP %s\n", model); - - /* longtrail (goldengate) stuff */ - if (!strncmp(model, "IBM,LongTrail", 13)) { - /* VLSI VAS96011/12 `Golden Gate 2' */ - /* Memory banks */ - sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) - >>31) & 1; - for (i = 0; i < (sdramen ? 4 : 6); i++) { - t = in_le32(gg2_pci_config_base+ - GG2_PCI_DRAM_BANK0+ - i*4); - if (!(t & 1)) - continue; - switch ((t>>8) & 0x1f) { - case 0x1f: - model = "4 MB"; - break; - case 0x1e: - model = "8 MB"; - break; - case 0x1c: - model = "16 MB"; - break; - case 0x18: - model = "32 MB"; - break; - case 0x10: - model = "64 MB"; - break; - case 0x00: - model = "128 MB"; - break; - default: - model = "Reserved"; - break; - } - seq_printf(m, "memory bank %d\t: %s %s\n", i, model, - gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); - } - /* L2 cache */ - t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); - seq_printf(m, "board l2\t: %s %s (%s)\n", - gg2_cachesizes[(t>>7) & 3], - gg2_cachetypes[(t>>2) & 3], - gg2_cachemodes[t & 3]); - } - return 0; -} - -/* - * Fixes for the National Semiconductor PC78308VUL SuperI/O - * - * Some versions of Open Firmware incorrectly initialize the IRQ settings - * for keyboard and mouse - */ -static inline void __init sio_write(u8 val, u8 index) -{ - outb(index, 0x15c); - outb(val, 0x15d); -} - -static inline u8 __init sio_read(u8 index) -{ - outb(index, 0x15c); - return inb(0x15d); -} - -static void __init sio_fixup_irq(const char *name, u8 device, u8 level, - u8 type) -{ - u8 level0, type0, active; - - /* select logical device */ - sio_write(device, 0x07); - active = sio_read(0x30); - level0 = sio_read(0x70); - type0 = sio_read(0x71); - if (level0 != level || type0 != type || !active) { - printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " - "remapping to level %d, type %d, active\n", - name, level0, type0, !active ? "in" : "", level, type); - sio_write(0x01, 0x30); - sio_write(level, 0x70); - sio_write(type, 0x71); - } -} - -static void __init sio_init(void) -{ - struct device_node *root; - - if ((root = find_path_device("/")) && - !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) { - /* logical device 0 (KBC/Keyboard) */ - sio_fixup_irq("keyboard", 0, 1, 2); - /* select logical device 1 (KBC/Mouse) */ - sio_fixup_irq("mouse", 1, 12, 2); - } -} - - -static void __init pegasos_set_l2cr(void) -{ - struct device_node *np; - - /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ - if (_chrp_type != _CHRP_Pegasos) - return; - - /* Enable L2 cache if needed */ - np = find_type_devices("cpu"); - if (np != NULL) { - unsigned int *l2cr = (unsigned int *) - get_property (np, "l2cr", NULL); - if (l2cr == NULL) { - printk ("Pegasos l2cr : no cpu l2cr property found\n"); - return; - } - if (!((*l2cr) & 0x80000000)) { - printk ("Pegasos l2cr : L2 cache was not active, " - "activating\n"); - _set_L2CR(0); - _set_L2CR((*l2cr) | 0x80000000); - } - } -} - -void __init chrp_setup_arch(void) -{ - struct device_node *device; - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000/HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - /* this is fine for chrp */ - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - /* On pegasos, enable the L2 cache if not already done by OF */ - pegasos_set_l2cr(); - - /* Lookup PCI host bridges */ - chrp_find_bridges(); - -#ifndef CONFIG_PPC64BRIDGE - /* - * Temporary fixes for PCI devices. - * -- Geert - */ - hydra_init(); /* Mac I/O */ - -#endif /* CONFIG_PPC64BRIDGE */ - - /* - * Fix the Super I/O configuration - */ - sio_init(); - - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - if ( rtas_data ) { - struct property *p; - device = find_devices("rtas"); - for ( p = device->properties; - p && strncmp(p->name, "rtas-event-scan-rate", 20); - p = p->next ) - /* nothing */ ; - if ( p && *(unsigned long *)p->value ) { - ppc_md.heartbeat = chrp_event_scan; - ppc_md.heartbeat_reset = (HZ/(*(unsigned long *)p->value)*30)-1; - ppc_md.heartbeat_count = 1; - printk("RTAS Event Scan Rate: %lu (%lu jiffies)\n", - *(unsigned long *)p->value, ppc_md.heartbeat_reset ); - } - } - - pci_create_OF_bus_map(); -} - -void -chrp_event_scan(void) -{ - unsigned char log[1024]; - unsigned long ret = 0; - /* XXX: we should loop until the hardware says no more error logs -- Cort */ - call_rtas( "event-scan", 4, 1, &ret, 0xffffffff, 0, - __pa(log), 1024 ); - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; -} - -void -chrp_restart(char *cmd) -{ - printk("RTAS system-reboot returned %d\n", - call_rtas("system-reboot", 0, 1, NULL)); - for (;;); -} - -void -chrp_power_off(void) -{ - /* allow power on only with power button press */ - printk("RTAS power-off returned %d\n", - call_rtas("power-off", 2, 1, NULL,0xffffffff,0xffffffff)); - for (;;); -} - -void -chrp_halt(void) -{ - chrp_power_off(); -} - -/* - * Finds the open-pic node and sets OpenPIC_Addr based on its reg property. - * Then checks if it has an interrupt-ranges property. If it does then - * we have a distributed open-pic, so call openpic_set_sources to tell - * the openpic code where to find the interrupt source registers. - */ -static void __init chrp_find_openpic(void) -{ - struct device_node *np; - int len, i; - unsigned int *iranges; - void __iomem *isu; - - np = find_type_devices("open-pic"); - if (np == NULL || np->n_addrs == 0) - return; - printk(KERN_INFO "OpenPIC at %x (size %x)\n", - np->addrs[0].address, np->addrs[0].size); - OpenPIC_Addr = ioremap(np->addrs[0].address, 0x40000); - if (OpenPIC_Addr == NULL) { - printk(KERN_ERR "Failed to map OpenPIC!\n"); - return; - } - - iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); - if (iranges == NULL || len < 2 * sizeof(unsigned int)) - return; /* not distributed */ - - /* - * The first pair of cells in interrupt-ranges refers to the - * IDU; subsequent pairs refer to the ISUs. - */ - len /= 2 * sizeof(unsigned int); - if (np->n_addrs < len) { - printk(KERN_ERR "Insufficient addresses for distributed" - " OpenPIC (%d < %d)\n", np->n_addrs, len); - return; - } - if (iranges[1] != 0) { - printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", - iranges[0], iranges[0] + iranges[1] - 1); - openpic_set_sources(iranges[0], iranges[1], NULL); - } - for (i = 1; i < len; ++i) { - iranges += 2; - printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x (%x)\n", - iranges[0], iranges[0] + iranges[1] - 1, - np->addrs[i].address, np->addrs[i].size); - isu = ioremap(np->addrs[i].address, np->addrs[i].size); - if (isu != NULL) - openpic_set_sources(iranges[0], iranges[1], isu); - else - printk(KERN_ERR "Failed to map OpenPIC ISU at %x!\n", - np->addrs[i].address); - } -} - -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) -static struct irqaction xmon_irqaction = { - .handler = xmon_irq, - .mask = CPU_MASK_NONE, - .name = "XMON break", -}; -#endif - -void __init chrp_init_IRQ(void) -{ - struct device_node *np; - unsigned long chrp_int_ack = 0; - unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - struct device_node *kbd; -#endif - - for (np = find_devices("pci"); np != NULL; np = np->next) { - unsigned int *addrp = (unsigned int *) - get_property(np, "8259-interrupt-acknowledge", NULL); - - if (addrp == NULL) - continue; - chrp_int_ack = addrp[prom_n_addr_cells(np)-1]; - break; - } - if (np == NULL) - printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n"); - - chrp_find_openpic(); - - if (OpenPIC_Addr) { - prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS); - OpenPIC_InitSenses = init_senses; - OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS; - - openpic_init(NUM_8259_INTERRUPTS); - /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */ - openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", - i8259_irq); - - } - i8259_init(chrp_int_ack, 0); - -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - /* see if there is a keyboard in the device tree - with a parent of type "adb" */ - for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next) - if (kbd->parent && kbd->parent->type - && strcmp(kbd->parent->type, "adb") == 0) - break; - if (kbd) - setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); -#endif -} - -void __init -chrp_init2(void) -{ -#ifdef CONFIG_NVRAM - chrp_nvram_init(); -#endif - - request_region(0x20,0x20,"pic1"); - request_region(0xa0,0x20,"pic2"); - request_region(0x00,0x20,"dma1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xc0,0x20,"dma2"); - - if (ppc_md.progress) - ppc_md.progress(" Have fun! ", 0x7777); -} - -static struct device_node *memory_node; - -static int __init get_mem_prop(char *name, struct mem_pieces *mp) -{ - struct reg_property *rp; - int i, s; - unsigned int *ip; - int nac = prom_n_addr_cells(memory_node); - int nsc = prom_n_size_cells(memory_node); - - ip = (unsigned int *) get_property(memory_node, name, &s); - if (ip == NULL) { - printk(KERN_ERR "error: couldn't get %s property on /memory\n", - name); - return 0; - } - s /= (nsc + nac) * 4; - rp = mp->regions; - for (i = 0; i < s; ++i, ip += nac+nsc) { - if (nac >= 2 && ip[nac-2] != 0) - continue; - rp->address = ip[nac-1]; - if (nsc >= 2 && ip[nac+nsc-2] != 0) - rp->size = ~0U; - else - rp->size = ip[nac+nsc-1]; - ++rp; - } - mp->n_regions = rp - mp->regions; - - /* Make sure the pieces are sorted. */ - mem_pieces_sort(mp); - mem_pieces_coalesce(mp); - return 1; -} - -static unsigned long __init chrp_find_end_of_memory(void) -{ - unsigned long a, total; - struct mem_pieces phys_mem; - - /* - * Find out where physical memory is, and check that it - * starts at 0 and is contiguous. It seems that RAM is - * always physically contiguous on Power Macintoshes. - * - * Supporting discontiguous physical memory isn't hard, - * it just makes the virtual <-> physical mapping functions - * more complicated (or else you end up wasting space - * in mem_map). - */ - memory_node = find_devices("memory"); - if (memory_node == NULL || !get_mem_prop("reg", &phys_mem) - || phys_mem.n_regions == 0) - panic("No RAM??"); - a = phys_mem.regions[0].address; - if (a != 0) - panic("RAM doesn't start at physical address 0"); - total = phys_mem.regions[0].size; - - if (phys_mem.n_regions > 1) { - printk("RAM starting at 0x%x is not contiguous\n", - phys_mem.regions[1].address); - printk("Using RAM from 0 to 0x%lx\n", total-1); - } - - return total; -} - -void __init -chrp_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - struct device_node *root = find_path_device ("/"); - char *machine = NULL; - -#ifdef CONFIG_BLK_DEV_INITRD - /* take care of initrd if we have one */ - if ( r6 ) - { - initrd_start = r6 + KERNELBASE; - initrd_end = r6 + r7 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - isa_io_base = CHRP_ISA_IO_BASE; /* default value */ - ppc_do_canonicalize_irqs = 1; - - if (root) - machine = get_property(root, "model", NULL); - if (machine && strncmp(machine, "Pegasos", 7) == 0) { - _chrp_type = _CHRP_Pegasos; - } else if (machine && strncmp(machine, "IBM", 3) == 0) { - _chrp_type = _CHRP_IBM; - } else if (machine && strncmp(machine, "MOT", 3) == 0) { - _chrp_type = _CHRP_Motorola; - } else { - /* Let's assume it is an IBM chrp if all else fails */ - _chrp_type = _CHRP_IBM; - } - - ppc_md.setup_arch = chrp_setup_arch; - ppc_md.show_percpuinfo = of_show_percpuinfo; - ppc_md.show_cpuinfo = chrp_show_cpuinfo; - - ppc_md.init_IRQ = chrp_init_IRQ; - if (_chrp_type == _CHRP_Pegasos) - ppc_md.get_irq = i8259_irq; - else - ppc_md.get_irq = openpic_get_irq; - - ppc_md.init = chrp_init2; - - ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; - - ppc_md.restart = chrp_restart; - ppc_md.power_off = chrp_power_off; - ppc_md.halt = chrp_halt; - - ppc_md.time_init = chrp_time_init; - ppc_md.set_rtc_time = chrp_set_rtc_time; - ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; - - ppc_md.find_end_of_memory = chrp_find_end_of_memory; - - if (rtas_data) { - struct device_node *rtas; - unsigned int *p; - - rtas = find_devices("rtas"); - if (rtas != NULL) { - if (get_property(rtas, "display-character", NULL)) { - ppc_md.progress = rtas_display_progress; - p = (unsigned int *) get_property - (rtas, "ibm,display-line-length", NULL); - if (p) - max_width = *p; - } else if (get_property(rtas, "set-indicator", NULL)) - ppc_md.progress = rtas_indicator_progress; - } - } -#ifdef CONFIG_BOOTX_TEXT - if (ppc_md.progress == NULL && boot_text_mapped) - ppc_md.progress = btext_progress; -#endif - -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ - - /* - * Print the banner, then scroll down so boot progress - * can be printed. -- Cort - */ - if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); -} - -void -rtas_display_progress(char *s, unsigned short hex) -{ - int width; - char *os = s; - - if ( call_rtas( "display-character", 1, 1, NULL, '\r' ) ) - return; - - width = max_width; - while ( *os ) - { - if ( (*os == '\n') || (*os == '\r') ) - width = max_width; - else - width--; - call_rtas( "display-character", 1, 1, NULL, *os++ ); - /* if we overwrite the screen length */ - if ( width == 0 ) - while ( (*os != 0) && (*os != '\n') && (*os != '\r') ) - os++; - } - - /*while ( width-- > 0 )*/ - call_rtas( "display-character", 1, 1, NULL, ' ' ); -} - -void -rtas_indicator_progress(char *s, unsigned short hex) -{ - call_rtas("set-indicator", 3, 1, NULL, 6, 0, hex); -} - -#ifdef CONFIG_BOOTX_TEXT -void -btext_progress(char *s, unsigned short hex) -{ - prom_print(s); - prom_print("\n"); -} -#endif /* CONFIG_BOOTX_TEXT */ |