diff options
Diffstat (limited to 'arch/ppc/platforms/pmac_pic.c')
| -rw-r--r-- | arch/ppc/platforms/pmac_pic.c | 693 |
1 files changed, 0 insertions, 693 deletions
diff --git a/arch/ppc/platforms/pmac_pic.c b/arch/ppc/platforms/pmac_pic.c deleted file mode 100644 index 4742bf60935..00000000000 --- a/arch/ppc/platforms/pmac_pic.c +++ /dev/null @@ -1,693 +0,0 @@ -/* - * Support for the interrupt controllers found on Power Macintosh, - * currently Apple's "Grand Central" interrupt controller in all - * it's incarnations. OpenPIC support used on newer machines is - * in a separate file - * - * Copyright (C) 1997 Paul Mackerras (paulus@cs.anu.edu.au) - * - * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <linux/stddef.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/sysdev.h> -#include <linux/adb.h> -#include <linux/pmu.h> - -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/time.h> -#include <asm/open_pic.h> -#include <asm/xmon.h> -#include <asm/pmac_feature.h> -#include <asm/machdep.h> - -#include "pmac_pic.h" - -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include <linux/interrupt.h> (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); - -struct pmac_irq_hw { - unsigned int event; - unsigned int enable; - unsigned int ack; - unsigned int level; -}; - -/* Default addresses */ -static volatile struct pmac_irq_hw *pmac_irq_hw[4] = { - (struct pmac_irq_hw *) 0xf3000020, - (struct pmac_irq_hw *) 0xf3000010, - (struct pmac_irq_hw *) 0xf4000020, - (struct pmac_irq_hw *) 0xf4000010, -}; - -#define GC_LEVEL_MASK 0x3ff00000 -#define OHARE_LEVEL_MASK 0x1ff00000 -#define HEATHROW_LEVEL_MASK 0x1ff00000 - -static int max_irqs; -static int max_real_irqs; -static u32 level_mask[4]; - -static DEFINE_SPINLOCK(pmac_pic_lock); - - -#define GATWICK_IRQ_POOL_SIZE 10 -static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; - -/* - * Mark an irq as "lost". This is only used on the pmac - * since it can lose interrupts (see pmac_set_irq_mask). - * -- Cort - */ -void -__set_lost(unsigned long irq_nr, int nokick) -{ - if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) { - atomic_inc(&ppc_n_lost_interrupts); - if (!nokick) - set_dec(1); - } -} - -static void -pmac_mask_and_ack_irq(unsigned int irq_nr) -{ - unsigned long bit = 1UL << (irq_nr & 0x1f); - int i = irq_nr >> 5; - unsigned long flags; - - if ((unsigned)irq_nr >= max_irqs) - return; - - clear_bit(irq_nr, ppc_cached_irq_mask); - if (test_and_clear_bit(irq_nr, ppc_lost_interrupts)) - atomic_dec(&ppc_n_lost_interrupts); - spin_lock_irqsave(&pmac_pic_lock, flags); - out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); - out_le32(&pmac_irq_hw[i]->ack, bit); - do { - /* make sure ack gets to controller before we enable - interrupts */ - mb(); - } while((in_le32(&pmac_irq_hw[i]->enable) & bit) - != (ppc_cached_irq_mask[i] & bit)); - spin_unlock_irqrestore(&pmac_pic_lock, flags); -} - -static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) -{ - unsigned long bit = 1UL << (irq_nr & 0x1f); - int i = irq_nr >> 5; - unsigned long flags; - - if ((unsigned)irq_nr >= max_irqs) - return; - - spin_lock_irqsave(&pmac_pic_lock, flags); - /* enable unmasked interrupts */ - out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); - - do { - /* make sure mask gets to controller before we - return to user */ - mb(); - } while((in_le32(&pmac_irq_hw[i]->enable) & bit) - != (ppc_cached_irq_mask[i] & bit)); - - /* - * Unfortunately, setting the bit in the enable register - * when the device interrupt is already on *doesn't* set - * the bit in the flag register or request another interrupt. - */ - if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level)) - __set_lost((ulong)irq_nr, nokicklost); - spin_unlock_irqrestore(&pmac_pic_lock, flags); -} - -/* When an irq gets requested for the first client, if it's an - * edge interrupt, we clear any previous one on the controller - */ -static unsigned int pmac_startup_irq(unsigned int irq_nr) -{ - unsigned long bit = 1UL << (irq_nr & 0x1f); - int i = irq_nr >> 5; - - if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0) - out_le32(&pmac_irq_hw[i]->ack, bit); - set_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 0); - - return 0; -} - -static void pmac_mask_irq(unsigned int irq_nr) -{ - clear_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 0); - mb(); -} - -static void pmac_unmask_irq(unsigned int irq_nr) -{ - set_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 0); -} - -static void pmac_end_irq(unsigned int irq_nr) -{ - if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) - && irq_desc[irq_nr].action) { - set_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 1); - } -} - - -struct hw_interrupt_type pmac_pic = { - .typename = " PMAC-PIC ", - .startup = pmac_startup_irq, - .enable = pmac_unmask_irq, - .disable = pmac_mask_irq, - .ack = pmac_mask_and_ack_irq, - .end = pmac_end_irq, -}; - -struct hw_interrupt_type gatwick_pic = { - .typename = " GATWICK ", - .startup = pmac_startup_irq, - .enable = pmac_unmask_irq, - .disable = pmac_mask_irq, - .ack = pmac_mask_and_ack_irq, - .end = pmac_end_irq, -}; - -static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs) -{ - int irq, bits; - - for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { - int i = irq >> 5; - bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; - /* We must read level interrupts from the level register */ - bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); - bits &= ppc_cached_irq_mask[i]; - if (bits == 0) - continue; - irq += __ilog2(bits); - __do_IRQ(irq, regs); - return IRQ_HANDLED; - } - printk("gatwick irq not from gatwick pic\n"); - return IRQ_NONE; -} - -int -pmac_get_irq(struct pt_regs *regs) -{ - int irq; - unsigned long bits = 0; - -#ifdef CONFIG_SMP - void psurge_smp_message_recv(struct pt_regs *); - - /* IPI's are a hack on the powersurge -- Cort */ - if ( smp_processor_id() != 0 ) { - psurge_smp_message_recv(regs); - return -2; /* ignore, already handled */ - } -#endif /* CONFIG_SMP */ - for (irq = max_real_irqs; (irq -= 32) >= 0; ) { - int i = irq >> 5; - bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; - /* We must read level interrupts from the level register */ - bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); - bits &= ppc_cached_irq_mask[i]; - if (bits == 0) - continue; - irq += __ilog2(bits); - break; - } - - return irq; -} - -/* This routine will fix some missing interrupt values in the device tree - * on the gatwick mac-io controller used by some PowerBooks - */ -static void __init -pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) -{ - struct device_node *node; - int count; - - memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool)); - node = gw->child; - count = 0; - while(node) - { - /* Fix SCC */ - if (strcasecmp(node->name, "escc") == 0) - if (node->child) { - if (node->child->n_intrs < 3) { - node->child->intrs = &gatwick_int_pool[count]; - count += 3; - } - node->child->n_intrs = 3; - node->child->intrs[0].line = 15+irq_base; - node->child->intrs[1].line = 4+irq_base; - node->child->intrs[2].line = 5+irq_base; - printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n", - node->child->intrs[0].line, - node->child->intrs[1].line, - node->child->intrs[2].line); - } - /* Fix media-bay & left SWIM */ - if (strcasecmp(node->name, "media-bay") == 0) { - struct device_node* ya_node; - - if (node->n_intrs == 0) - node->intrs = &gatwick_int_pool[count++]; - node->n_intrs = 1; - node->intrs[0].line = 29+irq_base; - printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n", - node->intrs[0].line); - - ya_node = node->child; - while(ya_node) - { - if (strcasecmp(ya_node->name, "floppy") == 0) { - if (ya_node->n_intrs < 2) { - ya_node->intrs = &gatwick_int_pool[count]; - count += 2; - } - ya_node->n_intrs = 2; - ya_node->intrs[0].line = 19+irq_base; - ya_node->intrs[1].line = 1+irq_base; - printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n", - ya_node->intrs[0].line, ya_node->intrs[1].line); - } - if (strcasecmp(ya_node->name, "ata4") == 0) { - if (ya_node->n_intrs < 2) { - ya_node->intrs = &gatwick_int_pool[count]; - count += 2; - } - ya_node->n_intrs = 2; - ya_node->intrs[0].line = 14+irq_base; - ya_node->intrs[1].line = 3+irq_base; - printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n", - ya_node->intrs[0].line, ya_node->intrs[1].line); - } - ya_node = ya_node->sibling; - } - } - node = node->sibling; - } - if (count > 10) { - printk("WARNING !! Gatwick interrupt pool overflow\n"); - printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE); - printk(" requested = %d\n", count); - } -} - -/* - * The PowerBook 3400/2400/3500 can have a combo ethernet/modem - * card which includes an ohare chip that acts as a second interrupt - * controller. If we find this second ohare, set it up and fix the - * interrupt value in the device tree for the ethernet chip. - */ -static int __init enable_second_ohare(void) -{ - unsigned char bus, devfn; - unsigned short cmd; - unsigned long addr; - struct device_node *irqctrler = find_devices("pci106b,7"); - struct device_node *ether; - - if (irqctrler == NULL || irqctrler->n_addrs <= 0) - return -1; - addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40); - pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20); - max_irqs = 64; - if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) { - struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler); - if (!hose) - printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); - else { - early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - cmd &= ~PCI_COMMAND_IO; - early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); - } - } - - /* Fix interrupt for the modem/ethernet combo controller. The number - in the device tree (27) is bogus (correct for the ethernet-only - board but not the combo ethernet/modem board). - The real interrupt is 28 on the second controller -> 28+32 = 60. - */ - ether = find_devices("pci1011,14"); - if (ether && ether->n_intrs > 0) { - ether->intrs[0].line = 60; - printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n", - ether->intrs[0].line); - } - - /* Return the interrupt number of the cascade */ - return irqctrler->intrs[0].line; -} - -#ifdef CONFIG_POWER4 -static irqreturn_t k2u3_action(int cpl, void *dev_id, struct pt_regs *regs) -{ - int irq; - - irq = openpic2_get_irq(regs); - if (irq != -1) - __do_IRQ(irq, regs); - return IRQ_HANDLED; -} - -static struct irqaction k2u3_cascade_action = { - .handler = k2u3_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = "U3->K2 Cascade", -}; -#endif /* CONFIG_POWER4 */ - -#ifdef CONFIG_XMON -static struct irqaction xmon_action = { - .handler = xmon_irq, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = "NMI - XMON" -}; -#endif - -static struct irqaction gatwick_cascade_action = { - .handler = gatwick_action, - .flags = SA_INTERRUPT, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; - -void __init pmac_pic_init(void) -{ - int i; - struct device_node *irqctrler = NULL; - struct device_node *irqctrler2 = NULL; - struct device_node *np; - unsigned long addr; - int irq_cascade = -1; - - /* We first try to detect Apple's new Core99 chipset, since mac-io - * is quite different on those machines and contains an IBM MPIC2. - */ - np = find_type_devices("open-pic"); - while(np) { - if (np->parent && !strcmp(np->parent->name, "u3")) - irqctrler2 = np; - else - irqctrler = np; - np = np->next; - } - if (irqctrler != NULL) - { - if (irqctrler->n_addrs > 0) - { - unsigned char senses[128]; - - printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n", - irqctrler->addrs[0].address); - - prom_get_irq_senses(senses, 0, 128); - OpenPIC_InitSenses = senses; - OpenPIC_NumInitSenses = 128; - ppc_md.get_irq = openpic_get_irq; - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler, 0, 0); - OpenPIC_Addr = ioremap(irqctrler->addrs[0].address, - irqctrler->addrs[0].size); - openpic_init(0); - -#ifdef CONFIG_POWER4 - if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 && - irqctrler2->n_addrs > 0) { - printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n", - irqctrler2->addrs[0].address, - irqctrler2->intrs[0].line); - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0); - OpenPIC2_Addr = ioremap(irqctrler2->addrs[0].address, - irqctrler2->addrs[0].size); - prom_get_irq_senses(senses, PMAC_OPENPIC2_OFFSET, - PMAC_OPENPIC2_OFFSET+128); - OpenPIC_InitSenses = senses; - OpenPIC_NumInitSenses = 128; - openpic2_init(PMAC_OPENPIC2_OFFSET); - - if (setup_irq(irqctrler2->intrs[0].line, - &k2u3_cascade_action)) - printk("Unable to get OpenPIC IRQ for cascade\n"); - } -#endif /* CONFIG_POWER4 */ - -#ifdef CONFIG_XMON - { - struct device_node* pswitch; - int nmi_irq; - - pswitch = find_devices("programmer-switch"); - if (pswitch && pswitch->n_intrs) { - nmi_irq = pswitch->intrs[0].line; - openpic_init_nmi_irq(nmi_irq); - setup_irq(nmi_irq, &xmon_action); - } - } -#endif /* CONFIG_XMON */ - return; - } - irqctrler = NULL; - } - - /* Get the level/edge settings, assume if it's not - * a Grand Central nor an OHare, then it's an Heathrow - * (or Paddington). - */ - if (find_devices("gc")) - level_mask[0] = GC_LEVEL_MASK; - else if (find_devices("ohare")) { - level_mask[0] = OHARE_LEVEL_MASK; - /* We might have a second cascaded ohare */ - level_mask[1] = OHARE_LEVEL_MASK; - } else { - level_mask[0] = HEATHROW_LEVEL_MASK; - level_mask[1] = 0; - /* We might have a second cascaded heathrow */ - level_mask[2] = HEATHROW_LEVEL_MASK; - level_mask[3] = 0; - } - - /* - * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts, - * 1998 G3 Series PowerBooks have 128, - * other powermacs have 32. - * The combo ethernet/modem card for the Powerstar powerbooks - * (2400/3400/3500, ohare based) has a second ohare chip - * effectively making a total of 64. - */ - max_irqs = max_real_irqs = 32; - irqctrler = find_devices("mac-io"); - if (irqctrler) - { - max_real_irqs = 64; - if (irqctrler->next) - max_irqs = 128; - else - max_irqs = 64; - } - for ( i = 0; i < max_real_irqs ; i++ ) - irq_desc[i].handler = &pmac_pic; - - /* get addresses of first controller */ - if (irqctrler) { - if (irqctrler->n_addrs > 0) { - addr = (unsigned long) - ioremap(irqctrler->addrs[0].address, 0x40); - for (i = 0; i < 2; ++i) - pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) - (addr + (2 - i) * 0x10); - } - - /* get addresses of second controller */ - irqctrler = irqctrler->next; - if (irqctrler && irqctrler->n_addrs > 0) { - addr = (unsigned long) - ioremap(irqctrler->addrs[0].address, 0x40); - for (i = 2; i < 4; ++i) - pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) - (addr + (4 - i) * 0x10); - irq_cascade = irqctrler->intrs[0].line; - if (device_is_compatible(irqctrler, "gatwick")) - pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs); - } - } else { - /* older powermacs have a GC (grand central) or ohare at - f3000000, with interrupt control registers at f3000020. */ - addr = (unsigned long) ioremap(0xf3000000, 0x40); - pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20); - } - - /* PowerBooks 3400 and 3500 can have a second controller in a second - ohare chip, on the combo ethernet/modem card */ - if (machine_is_compatible("AAPL,3400/2400") - || machine_is_compatible("AAPL,3500")) - irq_cascade = enable_second_ohare(); - - /* disable all interrupts in all controllers */ - for (i = 0; i * 32 < max_irqs; ++i) - out_le32(&pmac_irq_hw[i]->enable, 0); - /* mark level interrupts */ - for (i = 0; i < max_irqs; i++) - if (level_mask[i >> 5] & (1UL << (i & 0x1f))) - irq_desc[i].status = IRQ_LEVEL; - - /* get interrupt line of secondary interrupt controller */ - if (irq_cascade >= 0) { - printk(KERN_INFO "irq: secondary controller on irq %d\n", - (int)irq_cascade); - for ( i = max_real_irqs ; i < max_irqs ; i++ ) - irq_desc[i].handler = &gatwick_pic; - setup_irq(irq_cascade, &gatwick_cascade_action); - } - printk("System has %d possible interrupts\n", max_irqs); - if (max_irqs != max_real_irqs) - printk(KERN_DEBUG "%d interrupts on main controller\n", - max_real_irqs); - -#ifdef CONFIG_XMON - setup_irq(20, &xmon_action); -#endif /* CONFIG_XMON */ -} - -#ifdef CONFIG_PM -/* - * These procedures are used in implementing sleep on the powerbooks. - * sleep_save_intrs() saves the states of all interrupt enables - * and disables all interrupts except for the nominated one. - * sleep_restore_intrs() restores the states of all interrupt enables. - */ -unsigned long sleep_save_mask[2]; - -/* This used to be passed by the PMU driver but that link got - * broken with the new driver model. We use this tweak for now... - */ -static int pmacpic_find_viaint(void) -{ - int viaint = -1; - -#ifdef CONFIG_ADB_PMU - struct device_node *np; - - if (pmu_get_model() != PMU_OHARE_BASED) - goto not_found; - np = of_find_node_by_name(NULL, "via-pmu"); - if (np == NULL) - goto not_found; - viaint = np->intrs[0].line; -#endif /* CONFIG_ADB_PMU */ - -not_found: - return viaint; -} - -static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) -{ - int viaint = pmacpic_find_viaint(); - - sleep_save_mask[0] = ppc_cached_irq_mask[0]; - sleep_save_mask[1] = ppc_cached_irq_mask[1]; - ppc_cached_irq_mask[0] = 0; - ppc_cached_irq_mask[1] = 0; - if (viaint > 0) - set_bit(viaint, ppc_cached_irq_mask); - out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]); - if (max_real_irqs > 32) - out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]); - (void)in_le32(&pmac_irq_hw[0]->event); - /* make sure mask gets to controller before we return to caller */ - mb(); - (void)in_le32(&pmac_irq_hw[0]->enable); - - return 0; -} - -static int pmacpic_resume(struct sys_device *sysdev) -{ - int i; - - out_le32(&pmac_irq_hw[0]->enable, 0); - if (max_real_irqs > 32) - out_le32(&pmac_irq_hw[1]->enable, 0); - mb(); - for (i = 0; i < max_real_irqs; ++i) - if (test_bit(i, sleep_save_mask)) - pmac_unmask_irq(i); - - return 0; -} - -#endif /* CONFIG_PM */ - -static struct sysdev_class pmacpic_sysclass = { - set_kset_name("pmac_pic"), -}; - -static struct sys_device device_pmacpic = { - .id = 0, - .cls = &pmacpic_sysclass, -}; - -static struct sysdev_driver driver_pmacpic = { -#ifdef CONFIG_PM - .suspend = &pmacpic_suspend, - .resume = &pmacpic_resume, -#endif /* CONFIG_PM */ -}; - -static int __init init_pmacpic_sysfs(void) -{ - if (max_irqs == 0) - return -ENODEV; - - printk(KERN_DEBUG "Registering pmac pic with sysfs...\n"); - sysdev_class_register(&pmacpic_sysclass); - sysdev_register(&device_pmacpic); - sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic); - return 0; -} - -subsys_initcall(init_pmacpic_sysfs); - |