summaryrefslogtreecommitdiffstats
path: root/arch/ppc/syslib/mpc52xx_setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/syslib/mpc52xx_setup.c')
-rw-r--r--arch/ppc/syslib/mpc52xx_setup.c313
1 files changed, 0 insertions, 313 deletions
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
deleted file mode 100644
index ab0cf4ced9e..00000000000
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Common code for the boards based on Freescale MPC52xx embedded CPU.
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Support for other bootloaders than UBoot by Dale Farnsworth
- * <dfarnsworth@mvista.com>
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/spinlock.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/mpc52xx.h>
-#include <asm/mpc52xx_psc.h>
-#include <asm/pgtable.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/mpc52xx_pci.h>
-
-extern bd_t __res;
-
-static int core_mult[] = { /* CPU Frequency multiplier, taken */
- 0, 0, 0, 10, 20, 20, 25, 45, /* from the datasheet used to compute */
- 30, 55, 40, 50, 0, 60, 35, 0, /* CPU frequency from XLB freq and */
- 30, 25, 65, 10, 70, 20, 75, 45, /* external jumper config */
- 0, 55, 40, 50, 80, 60, 35, 0
-};
-
-void
-mpc52xx_restart(char *cmd)
-{
- struct mpc52xx_gpt __iomem *gpt0 = MPC52xx_VA(MPC52xx_GPTx_OFFSET(0));
-
- local_irq_disable();
-
- /* Turn on the watchdog and wait for it to expire. It effectively
- does a reset */
- out_be32(&gpt0->count, 0x000000ff);
- out_be32(&gpt0->mode, 0x00009004);
-
- while (1);
-}
-
-void
-mpc52xx_halt(void)
-{
- local_irq_disable();
-
- while (1);
-}
-
-void
-mpc52xx_power_off(void)
-{
- /* By default we don't have any way of shut down.
- If a specific board wants to, it can set the power down
- code to any hardware implementation dependent code */
- mpc52xx_halt();
-}
-
-
-void __init
-mpc52xx_set_bat(void)
-{
- /* Set BAT 2 to map the 0xf0000000 area */
- /* This mapping is used during mpc52xx_progress,
- * mpc52xx_find_end_of_memory, and UARTs/GPIO access for debug
- */
- mb();
- mtspr(SPRN_DBAT2U, 0xf0001ffe);
- mtspr(SPRN_DBAT2L, 0xf000002a);
- mb();
-}
-
-void __init
-mpc52xx_map_io(void)
-{
- /* Here we map the MBAR and the whole upper zone. MBAR is only
- 64k but we can't map only 64k with BATs. Map the whole
- 0xf0000000 range is ok and helps eventual lpb devices placed there */
- io_block_mapping(
- MPC52xx_MBAR_VIRT, MPC52xx_MBAR, 0x10000000, _PAGE_IO);
-}
-
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-#ifndef MPC52xx_PF_CONSOLE_PORT
-#error "mpc52xx PSC for console not selected"
-#endif
-
-static void
-mpc52xx_psc_putc(struct mpc52xx_psc __iomem *psc, unsigned char c)
-{
- while (!(in_be16(&psc->mpc52xx_psc_status) &
- MPC52xx_PSC_SR_TXRDY));
- out_8(&psc->mpc52xx_psc_buffer_8, c);
-}
-
-void
-mpc52xx_progress(char *s, unsigned short hex)
-{
- char c;
- struct mpc52xx_psc __iomem *psc;
-
- psc = MPC52xx_VA(MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT));
-
- while ((c = *s++) != 0) {
- if (c == '\n')
- mpc52xx_psc_putc(psc, '\r');
- mpc52xx_psc_putc(psc, c);
- }
-
- mpc52xx_psc_putc(psc, '\r');
- mpc52xx_psc_putc(psc, '\n');
-}
-
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-
-
-unsigned long __init
-mpc52xx_find_end_of_memory(void)
-{
- u32 ramsize = __res.bi_memsize;
-
- /*
- * if bootloader passed a memsize, just use it
- * else get size from sdram config registers
- */
- if (ramsize == 0) {
- struct mpc52xx_mmap_ctl __iomem *mmap_ctl;
- u32 sdram_config_0, sdram_config_1;
-
- /* Temp BAT2 mapping active when this is called ! */
- mmap_ctl = MPC52xx_VA(MPC52xx_MMAP_CTL_OFFSET);
-
- sdram_config_0 = in_be32(&mmap_ctl->sdram0);
- sdram_config_1 = in_be32(&mmap_ctl->sdram1);
-
- if ((sdram_config_0 & 0x1f) >= 0x13)
- ramsize = 1 << ((sdram_config_0 & 0xf) + 17);
-
- if (((sdram_config_1 & 0x1f) >= 0x13) &&
- ((sdram_config_1 & 0xfff00000) == ramsize))
- ramsize += 1 << ((sdram_config_1 & 0xf) + 17);
- }
-
- return ramsize;
-}
-
-void __init
-mpc52xx_calibrate_decr(void)
-{
- int current_time, previous_time;
- int tbl_start, tbl_end;
- unsigned int xlbfreq, cpufreq, ipbfreq, pcifreq, divisor;
-
- xlbfreq = __res.bi_busfreq;
- /* if bootloader didn't pass bus frequencies, calculate them */
- if (xlbfreq == 0) {
- /* Get RTC & Clock manager modules */
- struct mpc52xx_rtc __iomem *rtc;
- struct mpc52xx_cdm __iomem *cdm;
-
- rtc = ioremap(MPC52xx_PA(MPC52xx_RTC_OFFSET), MPC52xx_RTC_SIZE);
- cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-
- if ((rtc==NULL) || (cdm==NULL))
- panic("Can't ioremap RTC/CDM while computing bus freq");
-
- /* Count bus clock during 1/64 sec */
- out_be32(&rtc->dividers, 0x8f1f0000); /* Set RTC 64x faster */
- previous_time = in_be32(&rtc->time);
- while ((current_time = in_be32(&rtc->time)) == previous_time) ;
- tbl_start = get_tbl();
- previous_time = current_time;
- while ((current_time = in_be32(&rtc->time)) == previous_time) ;
- tbl_end = get_tbl();
- out_be32(&rtc->dividers, 0xffff0000); /* Restore RTC */
-
- /* Compute all frequency from that & CDM settings */
- xlbfreq = (tbl_end - tbl_start) << 8;
- cpufreq = (xlbfreq * core_mult[in_be32(&cdm->rstcfg)&0x1f])/10;
- ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ?
- xlbfreq / 2 : xlbfreq;
- switch (in_8(&cdm->pci_clk_sel) & 3) {
- case 0:
- pcifreq = ipbfreq;
- break;
- case 1:
- pcifreq = ipbfreq / 2;
- break;
- default:
- pcifreq = xlbfreq / 4;
- break;
- }
- __res.bi_busfreq = xlbfreq;
- __res.bi_intfreq = cpufreq;
- __res.bi_ipbfreq = ipbfreq;
- __res.bi_pcifreq = pcifreq;
-
- /* Release mapping */
- iounmap(rtc);
- iounmap(cdm);
- }
-
- divisor = 4;
-
- tb_ticks_per_jiffy = xlbfreq / HZ / divisor;
- tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
-}
-
-
-void __init
-mpc52xx_setup_cpu(void)
-{
- struct mpc52xx_cdm __iomem *cdm;
- struct mpc52xx_xlb __iomem *xlb;
-
- /* Map zones */
- cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
- xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
-
- if (!cdm || !xlb) {
- printk(KERN_ERR __FILE__ ": "
- "Error while mapping CDM/XLB during "
- "mpc52xx_setup_cpu\n");
- goto unmap_regs;
- }
-
- /* Use internal 48 Mhz */
- out_8(&cdm->ext_48mhz_en, 0x00);
- out_8(&cdm->fd_enable, 0x01);
- if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */
- out_be16(&cdm->fd_counters, 0x0001);
- else
- out_be16(&cdm->fd_counters, 0x5555);
-
- /* Configure the XLB Arbiter priorities */
- out_be32(&xlb->master_pri_enable, 0xff);
- out_be32(&xlb->master_priority, 0x11111111);
-
- /* Enable ram snooping for 1GB window */
- out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
- out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
- /* Disable XLB pipelining */
- /* (cfr errata 292. We could do this only just before ATA PIO
- transaction and re-enable it after ...) */
- out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
-
- /* Unmap reg zone */
-unmap_regs:
- if (cdm) iounmap(cdm);
- if (xlb) iounmap(xlb);
-}
-
-
-int mpc52xx_match_psc_function(int psc_idx, const char *func)
-{
- struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;
-
- while ((cf->id != -1) && (cf->func != NULL)) {
- if ((cf->id == psc_idx) && !strcmp(cf->func,func))
- return 1;
- cf++;
- }
-
- return 0;
-}
-
-int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
-{
- static DEFINE_SPINLOCK(lock);
- struct mpc52xx_cdm __iomem *cdm;
- unsigned long flags;
- u16 mclken_div;
- u16 __iomem *reg;
- u32 mask;
-
- cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
- if (!cdm) {
- printk(KERN_ERR __FILE__ ": Error mapping CDM\n");
- return -ENODEV;
- }
-
- mclken_div = 0x8000 | (clkdiv & 0x1FF);
- switch (psc_id) {
- case 1: reg = &cdm->mclken_div_psc1; mask = 0x20; break;
- case 2: reg = &cdm->mclken_div_psc2; mask = 0x40; break;
- case 3: reg = &cdm->mclken_div_psc3; mask = 0x80; break;
- case 6: reg = &cdm->mclken_div_psc6; mask = 0x10; break;
- default:
- return -ENODEV;
- }
-
- /* Set the rate and enable the clock */
- spin_lock_irqsave(&lock, flags);
- out_be16(reg, mclken_div);
- out_be32(&cdm->clk_enables, in_be32(&cdm->clk_enables) | mask);
- spin_unlock_irqrestore(&lock, flags);
-
- iounmap(cdm);
- return 0;
-}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-06 19:42:09 +0000