summaryrefslogtreecommitdiffstats
path: root/arch/ppc64/kernel/pmac_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc64/kernel/pmac_pci.c')
-rw-r--r--arch/ppc64/kernel/pmac_pci.c793
1 files changed, 0 insertions, 793 deletions
diff --git a/arch/ppc64/kernel/pmac_pci.c b/arch/ppc64/kernel/pmac_pci.c
deleted file mode 100644
index dc40a0cad0b..00000000000
--- a/arch/ppc64/kernel/pmac_pci.c
+++ /dev/null
@@ -1,793 +0,0 @@
-/*
- * Support for PCI bridges found on Power Macintoshes.
- * At present the "bandit" and "chaos" bridges are supported.
- * Fortunately you access configuration space in the same
- * way with either bridge.
- *
- * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
- * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/iommu.h>
-
-#include "pci.h"
-#include "pmac.h"
-
-#define DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/* XXX Could be per-controller, but I don't think we risk anything by
- * assuming we won't have both UniNorth and Bandit */
-static int has_uninorth;
-static struct pci_controller *u3_agp;
-struct device_node *k2_skiplist[2];
-
-static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
-{
- for (; node != 0;node = node->sibling) {
- int * bus_range;
- unsigned int *class_code;
- int len;
-
- /* For PCI<->PCI bridges or CardBus bridges, we go down */
- class_code = (unsigned int *) get_property(node, "class-code", NULL);
- if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
- (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
- continue;
- bus_range = (int *) get_property(node, "bus-range", &len);
- if (bus_range != NULL && len > 2 * sizeof(int)) {
- if (bus_range[1] > higher)
- higher = bus_range[1];
- }
- higher = fixup_one_level_bus_range(node->child, higher);
- }
- return higher;
-}
-
-/* This routine fixes the "bus-range" property of all bridges in the
- * system since they tend to have their "last" member wrong on macs
- *
- * Note that the bus numbers manipulated here are OF bus numbers, they
- * are not Linux bus numbers.
- */
-static void __init fixup_bus_range(struct device_node *bridge)
-{
- int * bus_range;
- int len;
-
- /* Lookup the "bus-range" property for the hose */
- bus_range = (int *) get_property(bridge, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s\n",
- bridge->full_name);
- return;
- }
- bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
-}
-
-/*
- * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers.
- *
- * The "Bandit" version is present in all early PCI PowerMacs,
- * and up to the first ones using Grackle. Some machines may
- * have 2 bandit controllers (2 PCI busses).
- *
- * "Chaos" is used in some "Bandit"-type machines as a bridge
- * for the separate display bus. It is accessed the same
- * way as bandit, but cannot be probed for devices. It therefore
- * has its own config access functions.
- *
- * The "UniNorth" version is present in all Core99 machines
- * (iBook, G4, new IMacs, and all the recent Apple machines).
- * It contains 3 controllers in one ASIC.
- *
- * The U3 is the bridge used on G5 machines. It contains on
- * AGP bus which is dealt with the old UniNorth access routines
- * and an HyperTransport bus which uses its own set of access
- * functions.
- */
-
-#define MACRISC_CFA0(devfn, off) \
- ((1 << (unsigned long)PCI_SLOT(dev_fn)) \
- | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
- | (((unsigned long)(off)) & 0xFCUL))
-
-#define MACRISC_CFA1(bus, devfn, off) \
- ((((unsigned long)(bus)) << 16) \
- |(((unsigned long)(devfn)) << 8) \
- |(((unsigned long)(off)) & 0xFCUL) \
- |1UL)
-
-static unsigned long __pmac macrisc_cfg_access(struct pci_controller* hose,
- u8 bus, u8 dev_fn, u8 offset)
-{
- unsigned int caddr;
-
- if (bus == hose->first_busno) {
- if (dev_fn < (11 << 3))
- return 0;
- caddr = MACRISC_CFA0(dev_fn, offset);
- } else
- caddr = MACRISC_CFA1(bus, dev_fn, offset);
-
- /* Uninorth will return garbage if we don't read back the value ! */
- do {
- out_le32(hose->cfg_addr, caddr);
- } while (in_le32(hose->cfg_addr) != caddr);
-
- offset &= has_uninorth ? 0x07 : 0x03;
- return ((unsigned long)hose->cfg_data) + offset;
-}
-
-static int __pmac macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 *val)
-{
- struct pci_controller *hose;
- unsigned long addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- *val = in_8((u8 *)addr);
- break;
- case 2:
- *val = in_le16((u16 *)addr);
- break;
- default:
- *val = in_le32((u32 *)addr);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int __pmac macrisc_write_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 val)
-{
- struct pci_controller *hose;
- unsigned long addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
- break;
- case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
- break;
- default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops macrisc_pci_ops =
-{
- macrisc_read_config,
- macrisc_write_config
-};
-
-/*
- * These versions of U3 HyperTransport config space access ops do not
- * implement self-view of the HT host yet
- */
-
-/*
- * This function deals with some "special cases" devices.
- *
- * 0 -> No special case
- * 1 -> Skip the device but act as if the access was successfull
- * (return 0xff's on reads, eventually, cache config space
- * accesses in a later version)
- * -1 -> Hide the device (unsuccessful acess)
- */
-static int u3_ht_skip_device(struct pci_controller *hose,
- struct pci_bus *bus, unsigned int devfn)
-{
- struct device_node *busdn, *dn;
- int i;
-
- /* We only allow config cycles to devices that are in OF device-tree
- * as we are apparently having some weird things going on with some
- * revs of K2 on recent G5s
- */
- if (bus->self)
- busdn = pci_device_to_OF_node(bus->self);
- else
- busdn = hose->arch_data;
- for (dn = busdn->child; dn; dn = dn->sibling)
- if (dn->data && PCI_DN(dn)->devfn == devfn)
- break;
- if (dn == NULL)
- return -1;
-
- /*
- * When a device in K2 is powered down, we die on config
- * cycle accesses. Fix that here.
- */
- for (i=0; i<2; i++)
- if (k2_skiplist[i] == dn)
- return 1;
-
- return 0;
-}
-
-#define U3_HT_CFA0(devfn, off) \
- ((((unsigned long)devfn) << 8) | offset)
-#define U3_HT_CFA1(bus, devfn, off) \
- (U3_HT_CFA0(devfn, off) \
- + (((unsigned long)bus) << 16) \
- + 0x01000000UL)
-
-static unsigned long __pmac u3_ht_cfg_access(struct pci_controller* hose,
- u8 bus, u8 devfn, u8 offset)
-{
- if (bus == hose->first_busno) {
- /* For now, we don't self probe U3 HT bridge */
- if (PCI_SLOT(devfn) == 0)
- return 0;
- return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset);
- } else
- return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset);
-}
-
-static int __pmac u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 *val)
-{
- struct pci_controller *hose;
- unsigned long addr;
-
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (u3_ht_skip_device(hose, bus, devfn)) {
- case 0:
- break;
- case 1:
- switch (len) {
- case 1:
- *val = 0xff; break;
- case 2:
- *val = 0xffff; break;
- default:
- *val = 0xfffffffful; break;
- }
- return PCIBIOS_SUCCESSFUL;
- default:
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- *val = in_8((u8 *)addr);
- break;
- case 2:
- *val = in_le16((u16 *)addr);
- break;
- default:
- *val = in_le32((u32 *)addr);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int __pmac u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int len, u32 val)
-{
- struct pci_controller *hose;
- unsigned long addr;
-
- hose = pci_bus_to_host(bus);
- if (hose == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- switch (u3_ht_skip_device(hose, bus, devfn)) {
- case 0:
- break;
- case 1:
- return PCIBIOS_SUCCESSFUL;
- default:
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- switch (len) {
- case 1:
- out_8((u8 *)addr, val);
- (void) in_8((u8 *)addr);
- break;
- case 2:
- out_le16((u16 *)addr, val);
- (void) in_le16((u16 *)addr);
- break;
- default:
- out_le32((u32 *)addr, val);
- (void) in_le32((u32 *)addr);
- break;
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops u3_ht_pci_ops =
-{
- u3_ht_read_config,
- u3_ht_write_config
-};
-
-static void __init setup_u3_agp(struct pci_controller* hose)
-{
- /* On G5, we move AGP up to high bus number so we don't need
- * to reassign bus numbers for HT. If we ever have P2P bridges
- * on AGP, we'll have to move pci_assign_all_busses to the
- * pci_controller structure so we enable it for AGP and not for
- * HT childs.
- * We hard code the address because of the different size of
- * the reg address cell, we shall fix that by killing struct
- * reg_property and using some accessor functions instead
- */
- hose->first_busno = 0xf0;
- hose->last_busno = 0xff;
- has_uninorth = 1;
- hose->ops = &macrisc_pci_ops;
- hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
- hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
-
- u3_agp = hose;
-}
-
-static void __init setup_u3_ht(struct pci_controller* hose)
-{
- struct device_node *np = (struct device_node *)hose->arch_data;
- int i, cur;
-
- hose->ops = &u3_ht_pci_ops;
-
- /* We hard code the address because of the different size of
- * the reg address cell, we shall fix that by killing struct
- * reg_property and using some accessor functions instead
- */
- hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000);
-
- /*
- * /ht node doesn't expose a "ranges" property, so we "remove" regions that
- * have been allocated to AGP. So far, this version of the code doesn't assign
- * any of the 0xfxxxxxxx "fine" memory regions to /ht.
- * We need to fix that sooner or later by either parsing all child "ranges"
- * properties or figuring out the U3 address space decoding logic and
- * then read it's configuration register (if any).
- */
- hose->io_base_phys = 0xf4000000;
- hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000);
- isa_io_base = pci_io_base = (unsigned long) hose->io_base_virt;
- hose->io_resource.name = np->full_name;
- hose->io_resource.start = 0;
- hose->io_resource.end = 0x003fffff;
- hose->io_resource.flags = IORESOURCE_IO;
- hose->pci_mem_offset = 0;
- hose->first_busno = 0;
- hose->last_busno = 0xef;
- hose->mem_resources[0].name = np->full_name;
- hose->mem_resources[0].start = 0x80000000;
- hose->mem_resources[0].end = 0xefffffff;
- hose->mem_resources[0].flags = IORESOURCE_MEM;
-
- if (u3_agp == NULL) {
- DBG("U3 has no AGP, using full resource range\n");
- return;
- }
-
- /* We "remove" the AGP resources from the resources allocated to HT, that
- * is we create "holes". However, that code does assumptions that so far
- * happen to be true (cross fingers...), typically that resources in the
- * AGP node are properly ordered
- */
- cur = 0;
- for (i=0; i<3; i++) {
- struct resource *res = &u3_agp->mem_resources[i];
- if (res->flags != IORESOURCE_MEM)
- continue;
- /* We don't care about "fine" resources */
- if (res->start >= 0xf0000000)
- continue;
- /* Check if it's just a matter of "shrinking" us in one direction */
- if (hose->mem_resources[cur].start == res->start) {
- DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n",
- cur, hose->mem_resources[cur].start, res->end + 1);
- hose->mem_resources[cur].start = res->end + 1;
- continue;
- }
- if (hose->mem_resources[cur].end == res->end) {
- DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n",
- cur, hose->mem_resources[cur].end, res->start - 1);
- hose->mem_resources[cur].end = res->start - 1;
- continue;
- }
- /* No, it's not the case, we need a hole */
- if (cur == 2) {
- /* not enough resources for a hole, we drop part of the range */
- printk(KERN_WARNING "Running out of resources for /ht host !\n");
- hose->mem_resources[cur].end = res->start - 1;
- continue;
- }
- cur++;
- DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
- cur-1, res->start - 1, cur, res->end + 1);
- hose->mem_resources[cur].name = np->full_name;
- hose->mem_resources[cur].flags = IORESOURCE_MEM;
- hose->mem_resources[cur].start = res->end + 1;
- hose->mem_resources[cur].end = hose->mem_resources[cur-1].end;
- hose->mem_resources[cur-1].end = res->start - 1;
- }
-}
-
-static void __init pmac_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary)
-{
- static unsigned int static_lc_ranges[2024];
- unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
- unsigned int size;
- int rlen = 0, orig_rlen;
- int memno = 0;
- struct resource *res;
- int np, na = prom_n_addr_cells(dev);
-
- np = na + 5;
-
- /* First we try to merge ranges to fix a problem with some pmacs
- * that can have more than 3 ranges, fortunately using contiguous
- * addresses -- BenH
- */
- dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
- if (!dt_ranges)
- return;
- /* lc_ranges = alloc_bootmem(rlen);*/
- lc_ranges = static_lc_ranges;
- if (!lc_ranges)
- return; /* what can we do here ? */
- memcpy(lc_ranges, dt_ranges, rlen);
- orig_rlen = rlen;
-
- /* Let's work on a copy of the "ranges" property instead of damaging
- * the device-tree image in memory
- */
- ranges = lc_ranges;
- prev = NULL;
- while ((rlen -= np * sizeof(unsigned int)) >= 0) {
- if (prev) {
- if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
- (prev[2] + prev[na+4]) == ranges[2] &&
- (prev[na+2] + prev[na+4]) == ranges[na+2]) {
- prev[na+4] += ranges[na+4];
- ranges[0] = 0;
- ranges += np;
- continue;
- }
- }
- prev = ranges;
- ranges += np;
- }
-
- /*
- * The ranges property is laid out as an array of elements,
- * each of which comprises:
- * cells 0 - 2: a PCI address
- * cells 3 or 3+4: a CPU physical address
- * (size depending on dev->n_addr_cells)
- * cells 4+5 or 5+6: the size of the range
- */
- ranges = lc_ranges;
- rlen = orig_rlen;
- while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
- res = NULL;
- size = ranges[na+4];
- switch (ranges[0] >> 24) {
- case 1: /* I/O space */
- if (ranges[2] != 0)
- break;
- hose->io_base_phys = ranges[na+2];
- /* limit I/O space to 16MB */
- if (size > 0x01000000)
- size = 0x01000000;
- hose->io_base_virt = ioremap(ranges[na+2], size);
- if (primary)
- isa_io_base = (unsigned long) hose->io_base_virt;
- res = &hose->io_resource;
- res->flags = IORESOURCE_IO;
- res->start = ranges[2];
- break;
- case 2: /* memory space */
- memno = 0;
- if (ranges[1] == 0 && ranges[2] == 0
- && ranges[na+4] <= (16 << 20)) {
- /* 1st 16MB, i.e. ISA memory area */
-#if 0
- if (primary)
- isa_mem_base = ranges[na+2];
-#endif
- memno = 1;
- }
- while (memno < 3 && hose->mem_resources[memno].flags)
- ++memno;
- if (memno == 0)
- hose->pci_mem_offset = ranges[na+2] - ranges[2];
- if (memno < 3) {
- res = &hose->mem_resources[memno];
- res->flags = IORESOURCE_MEM;
- res->start = ranges[na+2];
- }
- break;
- }
- if (res != NULL) {
- res->name = dev->full_name;
- res->end = res->start + size - 1;
- res->parent = NULL;
- res->sibling = NULL;
- res->child = NULL;
- }
- ranges += np;
- }
-}
-
-/*
- * We assume that if we have a G3 powermac, we have one bridge called
- * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise,
- * if we have one or more bandit or chaos bridges, we don't have a MPC106.
- */
-static int __init add_bridge(struct device_node *dev)
-{
- int len;
- struct pci_controller *hose;
- char* disp_name;
- int *bus_range;
- int primary = 1;
- struct property *of_prop;
-
- DBG("Adding PCI host bridge %s\n", dev->full_name);
-
- bus_range = (int *) get_property(dev, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
- dev->full_name);
- }
-
- hose = alloc_bootmem(sizeof(struct pci_controller));
- if (hose == NULL)
- return -ENOMEM;
- pci_setup_pci_controller(hose);
-
- hose->arch_data = dev;
- hose->first_busno = bus_range ? bus_range[0] : 0;
- hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
- of_prop = alloc_bootmem(sizeof(struct property) +
- sizeof(hose->global_number));
- if (of_prop) {
- memset(of_prop, 0, sizeof(struct property));
- of_prop->name = "linux,pci-domain";
- of_prop->length = sizeof(hose->global_number);
- of_prop->value = (unsigned char *)&of_prop[1];
- memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number));
- prom_add_property(dev, of_prop);
- }
-
- disp_name = NULL;
- if (device_is_compatible(dev, "u3-agp")) {
- setup_u3_agp(hose);
- disp_name = "U3-AGP";
- primary = 0;
- } else if (device_is_compatible(dev, "u3-ht")) {
- setup_u3_ht(hose);
- disp_name = "U3-HT";
- primary = 1;
- }
- printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
- disp_name, hose->first_busno, hose->last_busno);
-
- /* Interpret the "ranges" property */
- /* This also maps the I/O region and sets isa_io/mem_base */
- pmac_process_bridge_OF_ranges(hose, dev, primary);
-
- /* Fixup "bus-range" OF property */
- fixup_bus_range(dev);
-
- return 0;
-}
-
-/*
- * We use our own read_irq_line here because PCI_INTERRUPT_PIN is
- * crap on some of Apple ASICs. We unconditionally use the Open Firmware
- * interrupt number as this is always right.
- */
-static int pmac_pci_read_irq_line(struct pci_dev *pci_dev)
-{
- struct device_node *node;
-
- node = pci_device_to_OF_node(pci_dev);
- if (node == NULL)
- return -1;
- if (node->n_intrs == 0)
- return -1;
- pci_dev->irq = node->intrs[0].line;
- pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq);
-
- return 0;
-}
-
-void __init pmac_pcibios_fixup(void)
-{
- struct pci_dev *dev = NULL;
-
- for_each_pci_dev(dev)
- pmac_pci_read_irq_line(dev);
-}
-
-static void __init pmac_fixup_phb_resources(void)
-{
- struct pci_controller *hose, *tmp;
-
- list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
- unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base;
- hose->io_resource.start += offset;
- hose->io_resource.end += offset;
- printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n",
- hose->global_number,
- hose->io_resource.start, hose->io_resource.end);
- }
-}
-
-void __init pmac_pci_init(void)
-{
- struct device_node *np, *root;
- struct device_node *ht = NULL;
-
- /* Probe root PCI hosts, that is on U3 the AGP host and the
- * HyperTransport host. That one is actually "kept" around
- * and actually added last as it's resource management relies
- * on the AGP resources to have been setup first
- */
- root = of_find_node_by_path("/");
- if (root == NULL) {
- printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
- return;
- }
- for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
- if (np->name == NULL)
- continue;
- if (strcmp(np->name, "pci") == 0) {
- if (add_bridge(np) == 0)
- of_node_get(np);
- }
- if (strcmp(np->name, "ht") == 0) {
- of_node_get(np);
- ht = np;
- }
- }
- of_node_put(root);
-
- /* Now setup the HyperTransport host if we found any
- */
- if (ht && add_bridge(ht) != 0)
- of_node_put(ht);
-
- /* Fixup the IO resources on our host bridges as the common code
- * does it only for childs of the host bridges
- */
- pmac_fixup_phb_resources();
-
- /* Setup the linkage between OF nodes and PHBs */
- pci_devs_phb_init();
-
- /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
- * assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions hopefully.
- */
- if (u3_agp) {
- struct device_node *np = u3_agp->arch_data;
- PCI_DN(np)->busno = 0xf0;
- for (np = np->child; np; np = np->sibling)
- PCI_DN(np)->busno = 0xf0;
- }
-
- pmac_check_ht_link();
-
- /* Tell pci.c to not use the common resource allocation mecanism */
- pci_probe_only = 1;
-
- /* Allow all IO */
- io_page_mask = -1;
-}
-
-/*
- * Disable second function on K2-SATA, it's broken
- * and disable IO BARs on first one
- */
-static void fixup_k2_sata(struct pci_dev* dev)
-{
- int i;
- u16 cmd;
-
- if (PCI_FUNC(dev->devfn) > 0) {
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- for (i = 0; i < 6; i++) {
- dev->resource[i].start = dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
- }
- } else {
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~PCI_COMMAND_IO;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- for (i = 0; i < 5; i++) {
- dev->resource[i].start = dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata);
-