diff options
Diffstat (limited to 'arch/ppc64/kernel/pmac_smp.c')
| -rw-r--r-- | arch/ppc64/kernel/pmac_smp.c | 316 |
1 files changed, 0 insertions, 316 deletions
diff --git a/arch/ppc64/kernel/pmac_smp.c b/arch/ppc64/kernel/pmac_smp.c deleted file mode 100644 index 83c2f8dc1ec..00000000000 --- a/arch/ppc64/kernel/pmac_smp.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * SMP support for power macintosh. - * - * We support both the old "powersurge" SMP architecture - * and the current Core99 (G4 PowerMac) machines. - * - * Note that we don't support the very first rev. of - * Apple/DayStar 2 CPUs board, the one with the funky - * watchdog. Hopefully, none of these should be there except - * maybe internally to Apple. I should probably still add some - * code to detect this card though and disable SMP. --BenH. - * - * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net) - * and Ben Herrenschmidt <benh@kernel.crashing.org>. - * - * Support for DayStar quad CPU cards - * Copyright (C) XLR8, Inc. 1994-2000 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/errno.h> -#include <linux/irq.h> - -#include <asm/ptrace.h> -#include <asm/atomic.h> -#include <asm/irq.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/smp.h> -#include <asm/machdep.h> -#include <asm/pmac_feature.h> -#include <asm/time.h> -#include <asm/cacheflush.h> -#include <asm/keylargo.h> -#include <asm/pmac_low_i2c.h> -#include <asm/mpic.h> - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -extern void __secondary_start_pmac_0(void); - -extern struct smp_ops_t *smp_ops; - -static void (*pmac_tb_freeze)(int freeze); -static struct device_node *pmac_tb_clock_chip_host; -static u8 pmac_tb_pulsar_addr; -static DEFINE_SPINLOCK(timebase_lock); -static unsigned long timebase; - -static void smp_core99_cypress_tb_freeze(int freeze) -{ - u8 data; - int rc; - - /* Strangely, the device-tree says address is 0xd2, but darwin - * accesses 0xd0 ... - */ - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd0 | pmac_low_i2c_read, - 0x81, &data, 1); - if (rc != 0) - goto bail; - - data = (data & 0xf3) | (freeze ? 0x00 : 0x0c); - - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - 0xd0 | pmac_low_i2c_write, - 0x81, &data, 1); - - bail: - if (rc != 0) { - printk("Cypress Timebase %s rc: %d\n", - freeze ? "freeze" : "unfreeze", rc); - panic("Timebase freeze failed !\n"); - } -} - -static void smp_core99_pulsar_tb_freeze(int freeze) -{ - u8 data; - int rc; - - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - pmac_tb_pulsar_addr | pmac_low_i2c_read, - 0x2e, &data, 1); - if (rc != 0) - goto bail; - - data = (data & 0x88) | (freeze ? 0x11 : 0x22); - - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub); - rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, - pmac_tb_pulsar_addr | pmac_low_i2c_write, - 0x2e, &data, 1); - bail: - if (rc != 0) { - printk(KERN_ERR "Pulsar Timebase %s rc: %d\n", - freeze ? "freeze" : "unfreeze", rc); - panic("Timebase freeze failed !\n"); - } -} - - -static void smp_core99_give_timebase(void) -{ - /* Open i2c bus for synchronous access */ - if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0)) - panic("Can't open i2c for TB sync !\n"); - - spin_lock(&timebase_lock); - (*pmac_tb_freeze)(1); - mb(); - timebase = get_tb(); - spin_unlock(&timebase_lock); - - while (timebase) - barrier(); - - spin_lock(&timebase_lock); - (*pmac_tb_freeze)(0); - spin_unlock(&timebase_lock); - - /* Close i2c bus */ - pmac_low_i2c_close(pmac_tb_clock_chip_host); -} - - -static void __devinit smp_core99_take_timebase(void) -{ - while (!timebase) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase >> 32, timebase & 0xffffffff); - timebase = 0; - spin_unlock(&timebase_lock); -} - - -static int __init smp_core99_probe(void) -{ - struct device_node *cpus; - struct device_node *cc; - int ncpus = 0; - - /* Maybe use systemconfiguration here ? */ - if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345); - - /* Count CPUs in the device-tree */ - for (cpus = NULL; (cpus = of_find_node_by_type(cpus, "cpu")) != NULL;) - ++ncpus; - - printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus); - - /* Nothing more to do if less than 2 of them */ - if (ncpus <= 1) - return 1; - - /* HW sync only on these platforms */ - if (!machine_is_compatible("PowerMac7,2") && - !machine_is_compatible("PowerMac7,3") && - !machine_is_compatible("RackMac3,1")) - goto nohwsync; - - /* Look for the clock chip */ - for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) { - struct device_node *p = of_get_parent(cc); - u32 *reg; - int ok; - ok = p && device_is_compatible(p, "uni-n-i2c"); - if (!ok) - goto next; - reg = (u32 *)get_property(cc, "reg", NULL); - if (reg == NULL) - goto next; - switch (*reg) { - case 0xd2: - if (device_is_compatible(cc, "pulsar-legacy-slewing")) { - pmac_tb_freeze = smp_core99_pulsar_tb_freeze; - pmac_tb_pulsar_addr = 0xd2; - printk(KERN_INFO "Timebase clock is Pulsar chip\n"); - } else if (device_is_compatible(cc, "cy28508")) { - pmac_tb_freeze = smp_core99_cypress_tb_freeze; - printk(KERN_INFO "Timebase clock is Cypress chip\n"); - } - break; - case 0xd4: - pmac_tb_freeze = smp_core99_pulsar_tb_freeze; - pmac_tb_pulsar_addr = 0xd4; - printk(KERN_INFO "Timebase clock is Pulsar chip\n"); - break; - } - if (pmac_tb_freeze != NULL) { - pmac_tb_clock_chip_host = p; - smp_ops->give_timebase = smp_core99_give_timebase; - smp_ops->take_timebase = smp_core99_take_timebase; - of_node_put(cc); - of_node_put(p); - break; - } - next: - of_node_put(p); - } - - nohwsync: - mpic_request_ipis(); - - return ncpus; -} - -static void __init smp_core99_kick_cpu(int nr) -{ - unsigned int save_vector, j; - unsigned long new_vector; - unsigned long flags; - volatile unsigned int *vector - = ((volatile unsigned int *)(KERNELBASE+0x100)); - - if (nr < 1 || nr > 3) - return; - if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346); - - local_irq_save(flags); - local_irq_disable(); - - /* Save reset vector */ - save_vector = *vector; - - /* Setup fake reset vector that does - * b __secondary_start_pmac_0 + nr*8 - KERNELBASE - */ - new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8; - *vector = 0x48000002 + (new_vector - KERNELBASE); - - /* flush data cache and inval instruction cache */ - flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); - - /* Put some life in our friend */ - pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0); - paca[nr].cpu_start = 1; - - /* FIXME: We wait a bit for the CPU to take the exception, I should - * instead wait for the entry code to set something for me. Well, - * ideally, all that crap will be done in prom.c and the CPU left - * in a RAM-based wait loop like CHRP. - */ - for (j = 1; j < 1000000; j++) - mb(); - - /* Restore our exception vector */ - *vector = save_vector; - flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); - - local_irq_restore(flags); - if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347); -} - -static void __init smp_core99_setup_cpu(int cpu_nr) -{ - /* Setup MPIC */ - mpic_setup_this_cpu(); - - if (cpu_nr == 0) { - extern void g5_phy_disable_cpu1(void); - - /* If we didn't start the second CPU, we must take - * it off the bus - */ - if (num_online_cpus() < 2) - g5_phy_disable_cpu1(); - if (ppc_md.progress) ppc_md.progress("smp_core99_setup_cpu 0 done", 0x349); - } -} - -struct smp_ops_t core99_smp_ops = { - .message_pass = smp_mpic_message_pass, - .probe = smp_core99_probe, - .kick_cpu = smp_core99_kick_cpu, - .setup_cpu = smp_core99_setup_cpu, - .give_timebase = smp_generic_give_timebase, - .take_timebase = smp_generic_take_timebase, -}; - -void __init pmac_setup_smp(void) -{ - smp_ops = &core99_smp_ops; -#ifdef CONFIG_HOTPLUG_CPU - smp_ops->cpu_enable = generic_cpu_enable; - smp_ops->cpu_disable = generic_cpu_disable; - smp_ops->cpu_die = generic_cpu_die; -#endif -} |