diff options
Diffstat (limited to 'arch/ppc')
28 files changed, 1979 insertions, 63 deletions
diff --git a/arch/ppc/8xx_io/Kconfig b/arch/ppc/8xx_io/Kconfig index 9e2227ec3b3..57dacf97853 100644 --- a/arch/ppc/8xx_io/Kconfig +++ b/arch/ppc/8xx_io/Kconfig @@ -69,9 +69,9 @@ config FEC_QS6612 config ENET_BIG_BUFFERS bool "Use Big CPM Ethernet Buffers" - depends on NET_ETHERNET + depends on SCC_ENET || FEC_ENET help - Allocate large buffers for MPC8xx Etherenet. Increases throughput + Allocate large buffers for MPC8xx Ethernet. Increases throughput and decreases the likelihood of dropped packets, but costs memory. config HTDMSOUND diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index 0cc2e7a9cb1..11726e2a4ec 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -39,8 +39,6 @@ #include <asm/tlbflush.h> #include <asm/rheap.h> -extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep); - static void m8xx_cpm_dpinit(void); static uint host_buffer; /* One page of host buffer */ static uint host_end; /* end + 1 */ @@ -108,14 +106,11 @@ struct hw_interrupt_type cpm_pic = { .end = cpm_eoi, }; -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); - void -m8xx_cpm_reset(uint bootpage) +m8xx_cpm_reset(void) { volatile immap_t *imp; volatile cpm8xx_t *commproc; - pte_t *pte; imp = (immap_t *)IMAP_ADDR; commproc = (cpm8xx_t *)&imp->im_cpm; @@ -143,17 +138,6 @@ m8xx_cpm_reset(uint bootpage) /* Reclaim the DP memory for our use. */ m8xx_cpm_dpinit(); - /* get the PTE for the bootpage */ - if (!get_pteptr(&init_mm, bootpage, &pte)) - panic("get_pteptr failed\n"); - - /* and make it uncachable */ - pte_val(*pte) |= _PAGE_NO_CACHE; - _tlbie(bootpage); - - host_buffer = bootpage; - host_end = host_buffer + PAGE_SIZE; - /* Tell everyone where the comm processor resides. */ cpmp = (cpm8xx_t *)commproc; @@ -384,8 +368,6 @@ static rh_info_t cpm_dpmem_info; void m8xx_cpm_dpinit(void) { - cpm8xx_t *cp = &((immap_t *)IMAP_ADDR)->im_cpm; - spin_lock_init(&cpm_dpmem_lock); /* Initialize the info header */ diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c index 0730392dcc2..62f68d6181c 100644 --- a/arch/ppc/8xx_io/fec.c +++ b/arch/ppc/8xx_io/fec.c @@ -173,7 +173,7 @@ struct fec_enet_private { uint phy_status; uint phy_speed; phy_info_t *phy; - struct tq_struct phy_task; + struct work_struct phy_task; uint sequence_done; @@ -199,7 +199,8 @@ static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev); #ifdef CONFIG_USE_MDIO static void fec_enet_mii(struct net_device *dev); #endif /* CONFIG_USE_MDIO */ -static void fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs); +static irqreturn_t fec_enet_interrupt(int irq, void * dev_id, + struct pt_regs * regs); #ifdef CONFIG_FEC_PACKETHOOK static void fec_enet_tx(struct net_device *dev, __u32 regval); static void fec_enet_rx(struct net_device *dev, __u32 regval); @@ -471,7 +472,7 @@ fec_timeout(struct net_device *dev) /* The interrupt handler. * This is called from the MPC core interrupt. */ -static void +static irqreturn_t fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs) { struct net_device *dev = dev_id; @@ -525,6 +526,7 @@ printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTIO } } + return IRQ_RETVAL(IRQ_HANDLED); } @@ -1263,8 +1265,9 @@ static void mii_display_status(struct net_device *dev) printk(".\n"); } -static void mii_display_config(struct net_device *dev) +static void mii_display_config(void *priv) { + struct net_device *dev = (struct net_device *)priv; struct fec_enet_private *fep = dev->priv; volatile uint *s = &(fep->phy_status); @@ -1294,8 +1297,9 @@ static void mii_display_config(struct net_device *dev) fep->sequence_done = 1; } -static void mii_relink(struct net_device *dev) +static void mii_relink(void *priv) { + struct net_device *dev = (struct net_device *)priv; struct fec_enet_private *fep = dev->priv; int duplex; @@ -1323,18 +1327,16 @@ static void mii_queue_relink(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = dev->priv; - fep->phy_task.routine = (void *)mii_relink; - fep->phy_task.data = dev; - schedule_task(&fep->phy_task); + INIT_WORK(&fep->phy_task, mii_relink, (void *)dev); + schedule_work(&fep->phy_task); } static void mii_queue_config(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = dev->priv; - fep->phy_task.routine = (void *)mii_display_config; - fep->phy_task.data = dev; - schedule_task(&fep->phy_task); + INIT_WORK(&fep->phy_task, mii_display_config, (void *)dev); + schedule_work(&fep->phy_task); } @@ -1403,11 +1405,11 @@ mii_discover_phy(uint mii_reg, struct net_device *dev) /* This interrupt occurs when the PHY detects a link change. */ -static void +static #ifdef CONFIG_RPXCLASSIC -mii_link_interrupt(void *dev_id) +void mii_link_interrupt(void *dev_id) #else -mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs) +irqreturn_t mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs) #endif { #ifdef CONFIG_USE_MDIO @@ -1440,6 +1442,9 @@ mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs) printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__); #endif /* CONFIG_USE_MDIO */ +#ifndef CONFIG_RPXCLASSIC + return IRQ_RETVAL(IRQ_HANDLED); +#endif /* CONFIG_RPXCLASSIC */ } static int @@ -1575,7 +1580,7 @@ static int __init fec_enet_init(void) struct fec_enet_private *fep; int i, j, k, err; unsigned char *eap, *iap, *ba; - unsigned long mem_addr; + dma_addr_t mem_addr; volatile cbd_t *bdp; cbd_t *cbd_base; volatile immap_t *immap; @@ -1640,7 +1645,8 @@ static int __init fec_enet_init(void) printk("FEC initialization failed.\n"); return 1; } - cbd_base = (cbd_t *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr); + cbd_base = (cbd_t *)dma_alloc_coherent(dev->class_dev.dev, PAGE_SIZE, + &mem_addr, GFP_KERNEL); /* Set receive and transmit descriptor base. */ @@ -1657,7 +1663,10 @@ static int __init fec_enet_init(void) /* Allocate a page. */ - ba = (unsigned char *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr); + ba = (unsigned char *)dma_alloc_coherent(dev->class_dev.dev, + PAGE_SIZE, + &mem_addr, + GFP_KERNEL); /* BUG: no check for failure */ /* Initialize the BD for every fragment in the page. diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 2c2da9b43b7..f6db3b385fe 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -558,6 +558,7 @@ config PPC_MULTIPLATFORM config APUS bool "Amiga-APUS" + depends on BROKEN help Select APUS if configuring for a PowerUP Amiga. More information is available at: @@ -647,6 +648,7 @@ config PAL4 config GEMINI bool "Synergy-Gemini" + depends on BROKEN help Select Gemini if configuring for a Synergy Microsystems' Gemini series Single Board Computer. More information is available at: diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index 991b4cbb83c..d4dc4fa7964 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -61,6 +61,12 @@ zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE end-$(CONFIG_EMBEDDEDBOOT) := embedded misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o + zimage-$(CONFIG_BAMBOO) := zImage-TREE +zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE + end-$(CONFIG_BAMBOO) := bamboo + entrypoint-$(CONFIG_BAMBOO) := 0x01000000 + extra.o-$(CONFIG_BAMBOO) := pibs.o + zimage-$(CONFIG_EBONY) := zImage-TREE zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE end-$(CONFIG_EBONY) := ebony diff --git a/arch/ppc/boot/simple/pibs.c b/arch/ppc/boot/simple/pibs.c index 1348740e503..67222d57c34 100644 --- a/arch/ppc/boot/simple/pibs.c +++ b/arch/ppc/boot/simple/pibs.c @@ -91,9 +91,11 @@ load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16); memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6); -#ifdef CONFIG_440GX +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16); memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6); +#endif +#ifdef CONFIG_440GX mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16); memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6); mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16); diff --git a/arch/ppc/configs/bamboo_defconfig b/arch/ppc/configs/bamboo_defconfig new file mode 100644 index 00000000000..0ba4e70d50b --- /dev/null +++ b/arch/ppc/configs/bamboo_defconfig @@ -0,0 +1,943 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12 +# Tue Jun 28 15:24:25 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_PPC_FPU=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y + +# +# IBM 4xx options +# +CONFIG_BAMBOO=y +# CONFIG_EBONY is not set +# CONFIG_LUAN is not set +# CONFIG_OCOTEA is not set +CONFIG_440EP=y +CONFIG_440=y +CONFIG_IBM440EP_ERR42=y +CONFIG_IBM_OCP=y +# CONFIG_PPC4xx_DMA is not set +CONFIG_PPC_GEN550=y +# CONFIG_PM is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="ip=on" +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_NAMES is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_CMD64X=y +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_BLK_DEV_SD is not set +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_EMAC=y +# CONFIG_IBM_EMAC_ERRMSG is not set +CONFIG_IBM_EMAC_RXB=64 +CONFIG_IBM_EMAC_TXB=8 +CONFIG_IBM_EMAC_FGAP=8 +CONFIG_IBM_EMAC_SKBRES=0 +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +CONFIG_EEPRO100=y +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=y +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=y +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +CONFIG_BDI_SWITCH=y +# CONFIG_SERIAL_TEXT_DEBUG is not set +CONFIG_PPC_OCP=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index 50936cda0af..8a3d74f2531 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -852,6 +852,26 @@ struct cpu_spec cpu_specs[] = { #endif /* CONFIG_40x */ #ifdef CONFIG_44x + { + .pvr_mask = 0xf0000fff, + .pvr_value = 0x40000850, + .cpu_name = "440EP Rev. A", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = COMMON_PPC, /* 440EP has an FPU */ + .icache_bsize = 32, + .dcache_bsize = 32, + }, + { + .pvr_mask = 0xf0000fff, + .pvr_value = 0x400008d3, + .cpu_name = "440EP Rev. B", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = COMMON_PPC, /* 440EP has an FPU */ + .icache_bsize = 32, + .dcache_bsize = 32, + }, { /* 440GP Rev. B */ .pvr_mask = 0xf0000fff, .pvr_value = 0x40000440, diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index d4df68629cc..cb83045e2ed 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -215,6 +215,7 @@ syscall_dotrace_cont: lwzx r10,r10,r0 /* Fetch system call handler [ptr] */ mtlr r10 addi r9,r1,STACK_FRAME_OVERHEAD + PPC440EP_ERR42 blrl /* Call handler */ .globl ret_from_syscall ret_from_syscall: diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 6c7ae605246..69ff3a9961e 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -179,24 +179,26 @@ skpinv: addi r4,r4,1 /* Increment */ 4: #ifdef CONFIG_SERIAL_TEXT_DEBUG /* - * Add temporary UART mapping for early debug. This - * mapping must be identical to that used by the early - * bootloader code since the same asm/serial.h parameters - * are used for polled operation. + * Add temporary UART mapping for early debug. + * We can map UART registers wherever we want as long as they don't + * interfere with other system mappings (e.g. with pinned entries). + * For an example of how we handle this - see ocotea.h. --ebs */ /* pageid fields */ lis r3,UART0_IO_BASE@h - ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M + ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K /* xlat fields */ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */ +#ifndef CONFIG_440EP ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */ +#endif /* attrib fields */ li r5,0 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G) - li r0,1 /* TLB slot 1 */ + li r0,0 /* TLB slot 0 */ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ @@ -228,6 +230,16 @@ skpinv: addi r4,r4,1 /* Increment */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ mtspr SPRN_IVPR,r4 +#ifdef CONFIG_440EP + /* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */ + mfspr r2,SPRN_CCR0 + lis r3,0xffef + ori r3,r3,0xffff + and r2,r2,r3 + mtspr SPRN_CCR0,r2 + isync +#endif + /* * This is where the main kernel code starts. */ diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 191a8def3bd..ce71b4a0158 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -1145,6 +1145,7 @@ _GLOBAL(kernel_thread) stwu r0,-16(r1) mtlr r30 /* fn addr in lr */ mr r3,r31 /* load arg and call fn */ + PPC440EP_ERR42 blrl li r0,__NR_exit /* exit if function returns */ li r3,0 @@ -1451,3 +1452,6 @@ _GLOBAL(sys_call_table) .long sys_waitid .long sys_ioprio_set .long sys_ioprio_get + .long sys_inotify_init /* 275 */ + .long sys_inotify_add_watch + .long sys_inotify_rm_watch diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 70cfb6ffd87..7b3586a3bf3 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -160,6 +160,21 @@ void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, } EXPORT_SYMBOL(pcibios_resource_to_bus); +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + unsigned long offset = 0; + struct pci_controller *hose = dev->sysdata; + + if (hose && res->flags & IORESOURCE_IO) + offset = (unsigned long)hose->io_base_virt - isa_io_base; + else if (hose && res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + res->start = region->start + offset; + res->end = region->end + offset; +} +EXPORT_SYMBOL(pcibios_bus_to_resource); + /* * We need to avoid collisions with `mirrored' VGA ports * and other strange ISA hardware, so we always want the diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index d59ad07de8e..e7d40cc6c1b 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -324,7 +324,7 @@ EXPORT_SYMBOL(__res); EXPORT_SYMBOL(next_mmu_context); EXPORT_SYMBOL(set_context); -EXPORT_SYMBOL(handle_mm_fault); /* For MOL */ +EXPORT_SYMBOL_GPL(__handle_mm_fault); /* For MOL */ EXPORT_SYMBOL(disarm_decr); #ifdef CONFIG_PPC_STD_MMU extern long mol_trampoline; diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index a0612a86455..f7c045764e0 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -68,6 +68,11 @@ choice depends on 44x default EBONY +config BAMBOO + bool "Bamboo" + help + This option enables support for the IBM PPC440EP evaluation board. + config EBONY bool "Ebony" help @@ -98,6 +103,12 @@ config NP405H depends on ASH default y +config 440EP + bool + depends on BAMBOO + select PPC_FPU + default y + config 440GP bool depends on EBONY @@ -115,7 +126,7 @@ config 440SP config 440 bool - depends on 440GP || 440SP + depends on 440GP || 440SP || 440EP default y config 440A @@ -123,6 +134,11 @@ config 440A depends on 440GX default y +config IBM440EP_ERR42 + bool + depends on 440EP + default y + # All 405-based cores up until the 405GPR and 405EP have this errata. config IBM405_ERR77 bool @@ -142,7 +158,7 @@ config BOOKE config IBM_OCP bool - depends on ASH || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT + depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT default y config XILINX_OCP diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index ea470c6adbb..844c3b5066e 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -2,6 +2,7 @@ # Makefile for the PowerPC 4xx linux kernel. obj-$(CONFIG_ASH) += ash.o +obj-$(CONFIG_BAMBOO) += bamboo.o obj-$(CONFIG_CPCI405) += cpci405.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_EP405) += ep405.o @@ -19,6 +20,7 @@ obj-$(CONFIG_405GP) += ibm405gp.o obj-$(CONFIG_REDWOOD_5) += ibmstb4.o obj-$(CONFIG_NP405H) += ibmnp405h.o obj-$(CONFIG_REDWOOD_6) += ibmstbx25.o +obj-$(CONFIG_440EP) += ibm440ep.o obj-$(CONFIG_440GP) += ibm440gp.o obj-$(CONFIG_440GX) += ibm440gx.o obj-$(CONFIG_440SP) += ibm440sp.o diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c new file mode 100644 index 00000000000..f116787b0b7 --- /dev/null +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -0,0 +1,427 @@ +/* + * arch/ppc/platforms/4xx/bamboo.c + * + * Bamboo board specific routines + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * Copyright 2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/blkdev.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/initrd.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/ethtool.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ocp.h> +#include <asm/pci-bridge.h> +#include <asm/time.h> +#include <asm/todc.h> +#include <asm/bootinfo.h> +#include <asm/ppc4xx_pic.h> +#include <asm/ppcboot.h> + +#include <syslib/gen550.h> +#include <syslib/ibm440gx_common.h> + +/* + * This is a horrible kludge, we eventually need to abstract this + * generic PHY stuff, so the standard phy mode defines can be + * easily used from arch code. + */ +#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h" + +bd_t __res; + +static struct ibm44x_clocks clocks __initdata; + +/* + * Bamboo external IRQ triggering/polarity settings + */ +unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = { + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */ +}; + +static void __init +bamboo_calibrate_decr(void) +{ + unsigned int freq; + + if (mfspr(SPRN_CCR1) & CCR1_TCS) + freq = BAMBOO_TMRCLK; + else + freq = clocks.cpu; + + ibm44x_calibrate_decr(freq); + +} + +static int +bamboo_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: IBM\n"); + seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n"); + + return 0; +} + +static inline int +bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { 28, 28, 28, 28 }, /* IDSEL 1 - PCI Slot 0 */ + { 27, 27, 27, 27 }, /* IDSEL 2 - PCI Slot 1 */ + { 26, 26, 26, 26 }, /* IDSEL 3 - PCI Slot 2 */ + { 25, 25, 25, 25 }, /* IDSEL 4 - PCI Slot 3 */ + }; + + const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void __init bamboo_set_emacdata(void) +{ + unsigned char * selection1_base; + struct ocp_def *def; + struct ocp_func_emac_data *emacdata; + u8 selection1_val; + int mode; + + selection1_base = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16); + selection1_val = readb(selection1_base); + iounmap((void *) selection1_base); + if (BAMBOO_SEL_MII(selection1_val)) + mode = PHY_MODE_MII; + else if (BAMBOO_SEL_RMII(selection1_val)) + mode = PHY_MODE_RMII; + else + mode = PHY_MODE_SMII; + + /* Set mac_addr and phy mode for each EMAC */ + + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0); + emacdata = def->additions; + memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6); + emacdata->phy_mode = mode; + + def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1); + emacdata = def->additions; + memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6); + emacdata->phy_mode = mode; +} + +static int +bamboo_exclude_device(unsigned char bus, unsigned char devfn) +{ + return (bus == 0 && devfn == 0); +} + +#define PCI_READW(offset) \ + (readw((void *)((u32)pci_reg_base+offset))) + +#define PCI_WRITEW(value, offset) \ + (writew(value, (void *)((u32)pci_reg_base+offset))) + +#define PCI_WRITEL(value, offset) \ + (writel(value, (void *)((u32)pci_reg_base+offset))) + +static void __init +bamboo_setup_pci(void) +{ + void *pci_reg_base; + unsigned long memory_size; + memory_size = ppc_md.find_end_of_memory(); + + pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE); + + /* Enable PCI I/O, Mem, and Busmaster cycles */ + PCI_WRITEW(PCI_READW(PCI_COMMAND) | + PCI_COMMAND_MEMORY | + PCI_COMMAND_MASTER, PCI_COMMAND); + + /* Disable region first */ + PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA); + + /* PLB starting addr: 0x00000000A0000000 */ + PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA); + + /* PCI start addr, 0xA0000000 (PCI Address) */ + PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA); + + /* Enable no pre-fetch, enable region */ + PCI_WRITEL(((0xffffffff - + (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01), + BAMBOO_PCIL0_PMM0MA); + + /* Disable region one */ + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA); + + /* Disable region two */ + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA); + PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA); + + /* Now configure the PCI->PLB windows, we only use PTM1 + * + * For Inbound flow, set the window size to all available memory + * This is required because if size is smaller, + * then Eth/PCI DD would fail as PCI card not able to access + * the memory allocated by DD. + */ + + PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS); /* disabled region 1 */ + PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA); /* begin of address map */ + + memory_size = 1 << fls(memory_size - 1); + + /* Size low + Enabled */ + PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS); + + eieio(); + iounmap(pci_reg_base); +} + +static void __init +bamboo_setup_hose(void) +{ + unsigned int bar_response, bar; + struct pci_controller *hose; + + bamboo_setup_pci(); + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET; + + pci_init_resource(&hose->io_resource, + BAMBOO_PCI_LOWER_IO, + BAMBOO_PCI_UPPER_IO, + IORESOURCE_IO, + "PCI host bridge"); + + pci_init_resource(&hose->mem_resources[0], + BAMBOO_PCI_LOWER_MEM, + BAMBOO_PCI_UPPER_MEM, + IORESOURCE_MEM, + "PCI host bridge"); + + ppc_md.pci_exclude_device = bamboo_exclude_device; + + hose->io_space.start = BAMBOO_PCI_LOWER_IO; + hose->io_space.end = BAMBOO_PCI_UPPER_IO; + hose->mem_space.start = BAMBOO_PCI_LOWER_MEM; + hose->mem_space.end = BAMBOO_PCI_UPPER_MEM; + isa_io_base = + (unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE); + hose->io_base_virt = (void *)isa_io_base; + + setup_indirect_pci(hose, + BAMBOO_PCI_CFGA_PLB32, + BAMBOO_PCI_CFGD_PLB32); + hose->set_cfg_type = 1; + + /* Zero config bars */ + for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { + early_write_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + 0x00000000); + early_read_config_dword(hose, hose->first_busno, + PCI_FUNC(hose->first_busno), bar, + &bar_response); + } + + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = bamboo_map_irq; +} + +TODC_ALLOC(); + +static void __init +bamboo_early_serial_map(void) +{ + struct uart_port port; + + /* Setup ioremapped serial port access */ + memset(&port, 0, sizeof(port)); + port.membase = ioremap64(PPC440EP_UART0_ADDR, 8); + port.irq = 0; + port.uartclk = clocks.uart0; + port.regshift = 0; + port.iotype = SERIAL_IO_MEM; + port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + port.line = 0; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 0 failed\n"); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(0, &port); +#endif + + port.membase = ioremap64(PPC440EP_UART1_ADDR, 8); + port.irq = 1; + port.uartclk = clocks.uart1; + port.line = 1; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 1 failed\n"); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(1, &port); +#endif + + port.membase = ioremap64(PPC440EP_UART2_ADDR, 8); + port.irq = 3; + port.uartclk = clocks.uart2; + port.line = 2; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 2 failed\n"); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + /* Configure debug serial access */ + gen550_init(2, &port); +#endif + + port.membase = ioremap64(PPC440EP_UART3_ADDR, 8); + port.irq = 4; + port.uartclk = clocks.uart3; + port.line = 3; + + if (early_serial_setup(&port) != 0) { + printk("Early serial init of port 3 failed\n"); + } +} + +static void __init +bamboo_setup_arch(void) +{ + + bamboo_set_emacdata(); + + ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ocp_sys_info.opb_bus_freq = clocks.opb; + + /* Setup TODC access */ + TODC_INIT(TODC_TYPE_DS1743, + 0, + 0, + ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE), + 8); + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + /* Setup PCI host bridge */ + bamboo_setup_hose(); + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + + bamboo_early_serial_map(); + + /* Identify the system */ + printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n"); +} + +void __init platform_init(unsigned long r3, unsigned long r4, + unsigned long r5, unsigned long r6, unsigned long r7) +{ + parse_bootinfo(find_bootinfo()); + + /* + * If we were passed in a board information, copy it into the + * residual data area. + */ + if (r3) + __res = *(bd_t *)(r3 + KERNELBASE); + + + ibm44x_platform_init(); + + ppc_md.setup_arch = bamboo_setup_arch; + ppc_md.show_cpuinfo = bamboo_show_cpuinfo; + ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ + + ppc_md.calibrate_decr = bamboo_calibrate_decr; + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + + ppc_md.nvram_read_val = todc_direct_read_val; + ppc_md.nvram_write_val = todc_direct_write_val; +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = bamboo_early_serial_map; +#endif +} + diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h new file mode 100644 index 00000000000..63d71450414 --- /dev/null +++ b/arch/ppc/platforms/4xx/bamboo.h @@ -0,0 +1,136 @@ +/* + * arch/ppc/platforms/bamboo.h + * + * Bamboo board definitions + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * + * Copyright 2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_BAMBOO_H__ +#define __ASM_BAMBOO_H__ + +#include <linux/config.h> +#include <platforms/4xx/ibm440ep.h> + +/* F/W TLB mapping used in bootloader glue to reset EMAC */ +#define PPC44x_EMAC0_MR0 0x0EF600E00 + +/* Location of MAC addresses in PIBS image */ +#define PIBS_FLASH_BASE 0xfff00000 +#define PIBS_MAC_BASE (PIBS_FLASH_BASE+0xc0400) +#define PIBS_MAC_SIZE 0x200 +#define PIBS_MAC_OFFSET 0x100 + +/* Default clock rate */ +#define BAMBOO_TMRCLK 25000000 + +/* RTC/NVRAM location */ +#define BAMBOO_RTC_ADDR 0x080000000ULL +#define BAMBOO_RTC_SIZE 0x2000 + +/* FPGA Registers */ +#define BAMBOO_FPGA_ADDR 0x080002000ULL + +#define BAMBOO_FPGA_CONFIG2_REG_ADDR (BAMBOO_FPGA_ADDR + 0x1) +#define BAMBOO_FULL_DUPLEX_EN(x) (x & 0x08) +#define BAMBOO_FORCE_100Mbps(x) (x & 0x04) +#define BAMBOO_AUTONEGOTIATE(x) (x & 0x02) + +#define BAMBOO_FPGA_SETTING_REG_ADDR (BAMBOO_FPGA_ADDR + 0x3) +#define BAMBOO_BOOT_SMALL_FLASH(x) (!(x & 0x80)) +#define BAMBOO_LARGE_FLASH_EN(x) (!(x & 0x40)) +#define BAMBOO_BOOT_NAND_FLASH(x) (!(x & 0x20)) + +#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4) +#define BAMBOO_SEL_MII(x) (x & 0x80) +#define BAMBOO_SEL_RMII(x) (x & 0x40) +#define BAMBOO_SEL_SMII(x) (x & 0x20) + +/* Flash */ +#define BAMBOO_SMALL_FLASH_LOW 0x087f00000ULL +#define BAMBOO_SMALL_FLASH_HIGH 0x0fff00000ULL +#define BAMBOO_SMALL_FLASH_SIZE 0x100000 +#define BAMBOO_LARGE_FLASH_LOW 0x087800000ULL +#define BAMBOO_LARGE_FLASH_HIGH1 0x0ff800000ULL +#define BAMBOO_LARGE_FLASH_HIGH2 0x0ffc00000ULL +#define BAMBOO_LARGE_FLASH_SIZE 0x400000 +#define BAMBOO_SRAM_LOW 0x087f00000ULL +#define BAMBOO_SRAM_HIGH1 0x0fff00000ULL +#define BAMBOO_SRAM_HIGH2 0x0ff800000ULL +#define BAMBOO_SRAM_SIZE 0x100000 +#define BAMBOO_NAND_FLASH_REG_ADDR 0x090000000ULL +#define BAMBOO_NAND_FLASH_REG_SIZE 0x2000 + +/* + * Serial port defines + */ +#define RS_TABLE_SIZE 4 + +#define UART0_IO_BASE 0xEF600300 +#define UART1_IO_BASE 0xEF600400 +#define UART2_IO_BASE 0xEF600500 +#define UART3_IO_BASE 0xEF600600 + +#define BASE_BAUD 33177600/3/16 +#define UART0_INT 0 +#define UART1_INT 1 +#define UART2_INT 3 +#define UART3_INT 4 + +#define STD_UART_OP(num) \ + { 0, BASE_BAUD, 0, UART##num##_INT, \ + (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ + iomem_base: UART##num##_IO_BASE, \ + io_type: SERIAL_IO_MEM}, + +#define SERIAL_PORT_DFNS \ + STD_UART_OP(0) \ + STD_UART_OP(1) \ + STD_UART_OP(2) \ + STD_UART_OP(3) + +/* PCI support */ +#define BAMBOO_PCI_CFGA_PLB32 0xeec00000 +#define BAMBOO_PCI_CFGD_PLB32 0xeec00004 + +#define BAMBOO_PCI_IO_BASE 0x00000000e8000000ULL +#define BAMBOO_PCI_IO_SIZE 0x00010000 +#define BAMBOO_PCI_MEM_OFFSET 0x00000000 +#define BAMBOO_PCI_PHY_MEM_BASE 0x00000000a0000000ULL + +#define BAMBOO_PCI_LOWER_IO 0x00000000 +#define BAMBOO_PCI_UPPER_IO 0x0000ffff +#define BAMBOO_PCI_LOWER_MEM 0xa0000000 +#define BAMBOO_PCI_UPPER_MEM 0xafffffff +#define BAMBOO_PCI_MEM_BASE 0xa0000000 + +#define BAMBOO_PCIL0_BASE 0x00000000ef400000ULL +#define BAMBOO_PCIL0_SIZE 0x40 + +#define BAMBOO_PCIL0_PMM0LA 0x000 +#define BAMBOO_PCIL0_PMM0MA 0x004 +#define BAMBOO_PCIL0_PMM0PCILA 0x008 +#define BAMBOO_PCIL0_PMM0PCIHA 0x00C +#define BAMBOO_PCIL0_PMM1LA 0x010 +#define BAMBOO_PCIL0_PMM1MA 0x014 +#define BAMBOO_PCIL0_PMM1PCILA 0x018 +#define BAMBOO_PCIL0_PMM1PCIHA 0x01C +#define BAMBOO_PCIL0_PMM2LA 0x020 +#define BAMBOO_PCIL0_PMM2MA 0x024 +#define BAMBOO_PCIL0_PMM2PCILA 0x028 +#define BAMBOO_PCIL0_PMM2PCIHA 0x02C +#define BAMBOO_PCIL0_PTM1MS 0x030 +#define BAMBOO_PCIL0_PTM1LA 0x034 +#define BAMBOO_PCIL0_PTM2MS 0x038 +#define BAMBOO_PCIL0_PTM2LA 0x03C + +#endif /* __ASM_BAMBOO_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index cd11734ef7c..509e69a095f 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -7,7 +7,7 @@ * Copyright 2002-2005 MontaVista Software Inc. * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2003, 2004 Zultys Technologies + * Copyright (c) 2003-2005 Zultys Technologies * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -50,6 +50,7 @@ #include <asm/bootinfo.h> #include <asm/ppc4xx_pic.h> #include <asm/ppcboot.h> +#include <asm/tlbflush.h> #include <syslib/gen550.h> #include <syslib/ibm440gp_common.h> @@ -248,6 +249,9 @@ ebony_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) /* Configure debug serial access */ gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); #endif port.membase = ioremap64(PPC440GP_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index 47c391c9174..d08faa46a0a 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -56,9 +56,18 @@ * Serial port defines */ -/* OpenBIOS defined UART mappings, used before early_serial_setup */ +#if defined(__BOOTER__) +/* OpenBIOS defined UART mappings, used by bootloader shim */ #define UART0_IO_BASE 0xE0000200 #define UART1_IO_BASE 0xE0000300 +#else +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 +#endif /* external Epson SG-615P */ #define BASE_BAUD 691200 @@ -66,7 +75,7 @@ #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c new file mode 100644 index 00000000000..284da01f1ff --- /dev/null +++ b/arch/ppc/platforms/4xx/ibm440ep.c @@ -0,0 +1,220 @@ +/* + * arch/ppc/platforms/4xx/ibm440ep.c + * + * PPC440EP I/O descriptions + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * Copyright 2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/init.h> +#include <linux/module.h> +#include <platforms/4xx/ibm440ep.h> +#include <asm/ocp.h> +#include <asm/ppc4xx_pic.h> + +static struct ocp_func_emac_data ibm440ep_emac0_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = 0, /* ZMII device index */ + .zmii_mux = 0, /* ZMII input of this EMAC */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 0, /* MAL rx channel number */ + .mal_tx_chan = 0, /* MAL tx channel number */ + .wol_irq = 61, /* WOL interrupt number */ + .mdio_idx = -1, /* No shared MDIO */ + .tah_idx = -1, /* No TAH */ +}; + +static struct ocp_func_emac_data ibm440ep_emac1_def = { + .rgmii_idx = -1, /* No RGMII */ + .rgmii_mux = -1, /* No RGMII */ + .zmii_idx = 0, /* ZMII device index */ + .zmii_mux = 1, /* ZMII input of this EMAC */ + .mal_idx = 0, /* MAL device index */ + .mal_rx_chan = 1, /* MAL rx channel number */ + .mal_tx_chan = 2, /* MAL tx channel number */ + .wol_irq = 63, /* WOL interrupt number */ + .mdio_idx = -1, /* No shared MDIO */ + .tah_idx = -1, /* No TAH */ +}; +OCP_SYSFS_EMAC_DATA() + +static struct ocp_func_mal_data ibm440ep_mal0_def = { + .num_tx_chans = 4, /* Number of TX channels */ + .num_rx_chans = 2, /* Number of RX channels */ + .txeob_irq = 10, /* TX End Of Buffer IRQ */ + .rxeob_irq = 11, /* RX End Of Buffer IRQ */ + .txde_irq = 33, /* TX Descriptor Error IRQ */ + .rxde_irq = 34, /* RX Descriptor Error IRQ */ + .serr_irq = 32, /* MAL System Error IRQ */ +}; +OCP_SYSFS_MAL_DATA() + +static struct ocp_func_iic_data ibm440ep_iic0_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; + +static struct ocp_func_iic_data ibm440ep_iic1_def = { + .fast_mode = 0, /* Use standad mode (100Khz) */ +}; +OCP_SYSFS_IIC_DATA() + +struct ocp_def core_ocp[] = { + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_OPB, + .index = 0, + .paddr = 0x0EF600000ULL, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 0, + .paddr = PPC440EP_UART0_ADDR, + .irq = UART0_INT, + .pm = IBM_CPM_UART0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 1, + .paddr = PPC440EP_UART1_ADDR, + .irq = UART1_INT, + .pm = IBM_CPM_UART1, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 2, + .paddr = PPC440EP_UART2_ADDR, + .irq = UART2_INT, + .pm = IBM_CPM_UART2, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_16550, + .index = 3, + .paddr = PPC440EP_UART3_ADDR, + .irq = UART3_INT, + .pm = IBM_CPM_UART3, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 0, + .paddr = 0x0EF600700ULL, + .irq = 2, + .pm = IBM_CPM_IIC0, + .additions = &ibm440ep_iic0_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_IIC, + .index = 1, + .paddr = 0x0EF600800ULL, + .irq = 7, + .pm = IBM_CPM_IIC1, + .additions = &ibm440ep_iic1_def, + .show = &ocp_show_iic_data + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_GPIO, + .index = 0, + .paddr = 0x0EF600B00ULL, + .irq = OCP_IRQ_NA, + .pm = IBM_CPM_GPIO0, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_GPIO, + .index = 1, + .paddr = 0x0EF600C00ULL, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_MAL, + .paddr = OCP_PADDR_NA, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + .additions = &ibm440ep_mal0_def, + .show = &ocp_show_mal_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 0, + .paddr = 0x0EF600E00ULL, + .irq = 60, + .pm = OCP_CPM_NA, + .additions = &ibm440ep_emac0_def, + .show = &ocp_show_emac_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_EMAC, + .index = 1, + .paddr = 0x0EF600F00ULL, + .irq = 62, + .pm = OCP_CPM_NA, + .additions = &ibm440ep_emac1_def, + .show = &ocp_show_emac_data, + }, + { .vendor = OCP_VENDOR_IBM, + .function = OCP_FUNC_ZMII, + .paddr = 0x0EF600D00ULL, + .irq = OCP_IRQ_NA, + .pm = OCP_CPM_NA, + }, + { .vendor = OCP_VENDOR_INVALID + } +}; + +/* Polarity and triggering settings for internal interrupt sources */ +struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = { + { .polarity = 0xffbffe03, + .triggering = 0xfffffe00, + .ext_irq_mask = 0x000001fc, /* IRQ0 - IRQ6 */ + }, + { .polarity = 0xffffc6ef, + .triggering = 0xffffc7ff, + .ext_irq_mask = 0x00003800, /* IRQ7 - IRQ9 */ + }, +}; + +static struct resource usb_gadget_resources[] = { + [0] = { + .start = 0x050000100ULL, + .end = 0x05000017FULL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 55, + .end = 55, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 dma_mask = 0xffffffffULL; + +static struct platform_device usb_gadget_device = { + .name = "musbhsfc", + .id = 0, + .num_resources = ARRAY_SIZE(usb_gadget_resources), + .resource = usb_gadget_resources, + .dev = { + .dma_mask = &dma_mask, + .coherent_dma_mask = 0xffffffffULL, + } +}; + +static struct platform_device *ibm440ep_devs[] __initdata = { + &usb_gadget_device, +}; + +static int __init +ibm440ep_platform_add_devices(void) +{ + return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs)); +} +arch_initcall(ibm440ep_platform_add_devices); + diff --git a/arch/ppc/platforms/4xx/ibm440ep.h b/arch/ppc/platforms/4xx/ibm440ep.h new file mode 100644 index 00000000000..97c80b8e3e1 --- /dev/null +++ b/arch/ppc/platforms/4xx/ibm440ep.h @@ -0,0 +1,76 @@ +/* + * arch/ppc/platforms/4xx/ibm440ep.h + * + * PPC440EP definitions + * + * Wade Farnsworth <wfarnsworth@mvista.com> + * + * Copyright 2002 Roland Dreier + * Copyright 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __PPC_PLATFORMS_IBM440EP_H +#define __PPC_PLATFORMS_IBM440EP_H + +#include <linux/config.h> +#include <asm/ibm44x.h> + +/* UART */ +#define PPC440EP_UART0_ADDR 0x0EF600300 +#define PPC440EP_UART1_ADDR 0x0EF600400 +#define PPC440EP_UART2_ADDR 0x0EF600500 +#define PPC440EP_UART3_ADDR 0x0EF600600 +#define UART0_INT 0 +#define UART1_INT 1 +#define UART2_INT 3 +#define UART3_INT 4 + +/* Clock and Power Management */ +#define IBM_CPM_IIC0 0x80000000 /* IIC interface */ +#define IBM_CPM_IIC1 0x40000000 /* IIC interface */ +#define IBM_CPM_PCI 0x20000000 /* PCI bridge */ +#define IBM_CPM_USB1H 0x08000000 /* USB 1.1 Host */ +#define IBM_CPM_FPU 0x04000000 /* floating point unit */ +#define IBM_CPM_CPU 0x02000000 /* processor core */ +#define IBM_CPM_DMA 0x01000000 /* DMA controller */ +#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */ +#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */ +#define IBM_CPM_EBC 0x00200000 /* External Bus Controller */ +#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */ +#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */ +#define IBM_CPM_PLB4 0x00040000 /* PLB4 bus arbiter */ +#define IBM_CPM_PLB4x3 0x00020000 /* PLB4 to PLB3 bridge controller */ +#define IBM_CPM_PLB3x4 0x00010000 /* PLB3 to PLB4 bridge controller */ +#define IBM_CPM_PLB3 0x00008000 /* PLB3 bus arbiter */ +#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */ +#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */ +#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */ +#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */ +#define IBM_CPM_UART0 0x00000200 /* serial port 0 */ +#define IBM_CPM_UART1 0x00000100 /* serial port 1 */ +#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */ +#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */ +#define IBM_CPM_EMAC0 0x00000020 /* ethernet port 0 */ +#define IBM_CPM_EMAC1 0x00000010 /* ethernet port 1 */ +#define IBM_CPM_UART2 0x00000008 /* serial port 2 */ +#define IBM_CPM_UART3 0x00000004 /* serial port 3 */ +#define IBM_CPM_USB2D 0x00000002 /* USB 2.0 Device */ +#define IBM_CPM_USB2H 0x00000001 /* USB 2.0 Host */ + +#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \ + | IBM_CPM_EBC | IBM_CPM_BGO | IBM_CPM_FPU \ + | IBM_CPM_EBM | IBM_CPM_PLB4 | IBM_CPM_3x4 \ + | IBM_CPM_PLB3 | IBM_CPM_PLB4x3 \ + | IBM_CPM_EMAC0 | IBM_CPM_TMRCLK \ + | IBM_CPM_DMA | IBM_CPM_PCI | IBM_CPM_EMAC1) + + +#endif /* __PPC_PLATFORMS_IBM440EP_H */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 5f82a6bc704..8fc34a34476 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -48,6 +48,7 @@ #include <asm/bootinfo.h> #include <asm/ppc4xx_pic.h> #include <asm/ppcboot.h> +#include <asm/tlbflush.h> #include <syslib/gen550.h> #include <syslib/ibm440gx_common.h> @@ -266,6 +267,9 @@ ocotea_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) /* Configure debug serial access */ gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); #endif port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h index 202dc825119..33251153ac5 100644 --- a/arch/ppc/platforms/4xx/ocotea.h +++ b/arch/ppc/platforms/4xx/ocotea.h @@ -55,15 +55,24 @@ */ #define RS_TABLE_SIZE 2 -/* OpenBIOS defined UART mappings, used before early_serial_setup */ +#if defined(__BOOTER__) +/* OpenBIOS defined UART mappings, used by bootloader shim */ #define UART0_IO_BASE 0xE0000200 #define UART1_IO_BASE 0xE0000300 +#else +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 +#endif #define BASE_BAUD 11059200/16 #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dec5bf4f687..220a65ab0a5 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o obj-$(CONFIG_PPC_OCP) += ocp.o obj-$(CONFIG_IBM_OCP) += ibm_ocp.o obj-$(CONFIG_44x) += ibm44x_common.o +obj-$(CONFIG_440EP) += ibm440gx_common.o obj-$(CONFIG_440GP) += ibm440gp_common.o obj-$(CONFIG_440GX) += ibm440gx_common.o obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o @@ -44,6 +45,7 @@ obj-$(CONFIG_PPC_CHRP) += open_pic.o indirect_pci.o i8259.o obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \ todc_time.o +obj-$(CONFIG_BAMBOO) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c index 4ad85e0e023..d4776af6a3c 100644 --- a/arch/ppc/syslib/ibm440gx_common.c +++ b/arch/ppc/syslib/ibm440gx_common.c @@ -34,6 +34,10 @@ void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk, u32 plld = CPR_READ(DCRN_CPR_PLLD); u32 uart0 = SDR_READ(DCRN_SDR_UART0); u32 uart1 = SDR_READ(DCRN_SDR_UART1); +#ifdef CONFIG_440EP + u32 uart2 = SDR_READ(DCRN_SDR_UART2); + u32 uart3 = SDR_READ(DCRN_SDR_UART3); +#endif /* Dividers */ u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32); @@ -96,6 +100,17 @@ bypass: p->uart1 = ser_clk; else p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256); +#ifdef CONFIG_440EP + if (uart2 & 0x00800000) + p->uart2 = ser_clk; + else + p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256); + + if (uart3 & 0x00800000) + p->uart3 = ser_clk; + else + p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256); +#endif } /* Issue L2C diagnostic command */ diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h index b14eb603ce0..c16b6a5ac6a 100644 --- a/arch/ppc/syslib/ibm44x_common.h +++ b/arch/ppc/syslib/ibm44x_common.h @@ -29,6 +29,10 @@ struct ibm44x_clocks { unsigned int ebc; /* PerClk */ unsigned int uart0; unsigned int uart1; +#ifdef CONFIG_440EP + unsigned int uart2; + unsigned int uart3; +#endif }; /* common 44x platform init */ diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index c1db2ab1d15..55a381af4e3 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -57,7 +57,7 @@ unsigned char __res[sizeof(bd_t)]; extern void m8xx_ide_init(void); extern unsigned long find_available_memory(void); -extern void m8xx_cpm_reset(uint cpm_page); +extern void m8xx_cpm_reset(); extern void m8xx_wdt_handler_install(bd_t *bp); extern void rpxfb_alloc_pages(void); extern void cpm_interrupt_init(void); @@ -70,13 +70,9 @@ board_init(void) void __init m8xx_setup_arch(void) { - int cpm_page; - - cpm_page = (int) alloc_bootmem_pages(PAGE_SIZE); - /* Reset the Communication Processor Module. */ - m8xx_cpm_reset(cpm_page); + m8xx_cpm_reset(); #ifdef CONFIG_FB_RPX rpxfb_alloc_pages(); diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index 75c8e9834ae..5aaf0e58e1f 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -191,8 +191,8 @@ struct platform_device ppc_sys_platform_devices[] = { .num_resources = 2, .resource = (struct resource[]) { { - .start = 0x22000, - .end = 0x22fff, + .start = 0x23000, + .end = 0x23fff, .flags = IORESOURCE_MEM, }, { @@ -208,8 +208,8 @@ struct platform_device ppc_sys_platform_devices[] = { .num_resources = 2, .resource = (struct resource[]) { { - .start = 0x23000, - .end = 0x23fff, + .start = 0x22000, + .end = 0x22fff, .flags = IORESOURCE_MEM, }, { |