diff options
Diffstat (limited to 'arch/ppc')
59 files changed, 2332 insertions, 1337 deletions
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 600f23d7fd3..10162b187bc 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -826,11 +826,6 @@ config MPC10X_BRIDGE depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT default y -config FSL_OCP - bool - depends on MPC10X_BRIDGE - default y - config MPC10X_OPENPIC bool depends on POWERPMC250 || LOPEC || SANDPOINT @@ -1083,6 +1078,23 @@ source "drivers/zorro/Kconfig" source kernel/power/Kconfig +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS + default y + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via /proc/<pid>/seccomp, it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + + If unsure, say Y. Only embedded should say N here. + endmenu config ISA_DMA_API @@ -1143,12 +1155,12 @@ config PCI_QSPAN config PCI_8260 bool - depends on PCI && 8260 && !8272 + depends on PCI && 8260 default y config 8260_PCI9 bool " Enable workaround for MPC826x erratum PCI 9" - depends on PCI_8260 + depends on PCI_8260 && !ADS8272 default y choice diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile index f850fb0fb51..c9ac5f5fa9e 100644 --- a/arch/ppc/boot/images/Makefile +++ b/arch/ppc/boot/images/Makefile @@ -22,7 +22,8 @@ targets += uImage $(obj)/uImage: $(obj)/vmlinux.gz $(Q)rm -f $@ $(call if_changed,uimage) - @echo ' Image: $@' $(if $(wildcard $@),'is ready','not made') + @echo -n ' Image: $@ ' + @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi # Files generated that shall be removed upon make clean clean-files := sImage vmapus vmlinux* miboot* zImage* uImage diff --git a/arch/ppc/boot/ld.script b/arch/ppc/boot/ld.script index 6ee602d8b6a..9362193742a 100644 --- a/arch/ppc/boot/ld.script +++ b/arch/ppc/boot/ld.script @@ -58,9 +58,6 @@ SECTIONS *(.ramdisk) __ramdisk_end = .; . = ALIGN(4096); - __sysmap_begin = .; - *(.sysmap) - __sysmap_end = .; CONSTRUCTORS } _edata = .; diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile index 4eacbd8c772..03415238fab 100644 --- a/arch/ppc/boot/openfirmware/Makefile +++ b/arch/ppc/boot/openfirmware/Makefile @@ -54,13 +54,10 @@ $(images)/ramdisk.image.gz: @echo ' RAM disk image must be provided separately' @/bin/false -objcpxmon-$(CONFIG_XMON) := --add-section=.sysmap=System.map \ - --set-section-flags=.sysmap=contents,alloc,load,readonly,data quiet_cmd_genimage = GEN $@ cmd_genimage = $(OBJCOPY) -R .comment \ --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data \ - $(objcpxmon-y) $< $@ + --set-section-flags=.image=contents,alloc,load,readonly,data $< $@ targets += image.o $(obj)/image.o: $(obj)/dummy.o $(images)/vmlinux.gz FORCE diff --git a/arch/ppc/boot/openfirmware/common.c b/arch/ppc/boot/openfirmware/common.c index 9e6952781f1..0f46756a903 100644 --- a/arch/ppc/boot/openfirmware/common.c +++ b/arch/ppc/boot/openfirmware/common.c @@ -15,7 +15,6 @@ #include <asm/page.h> /* Information from the linker */ -extern char __sysmap_begin, __sysmap_end; extern int strcmp(const char *s1, const char *s2); extern char *avail_ram, *avail_high; @@ -116,14 +115,8 @@ void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) void make_bi_recs(unsigned long addr, char *name, unsigned int mach, unsigned long progend) { - unsigned long sysmap_size; struct bi_record *rec; - /* Figure out the size of a possible System.map we're going to - * pass along. - * */ - sysmap_size = (unsigned long)(&__sysmap_end) - - (unsigned long)(&__sysmap_begin); /* leave a 1MB gap then align to the next 1MB boundary */ addr = _ALIGN(addr+ (1<<20) - 1, (1<<20)); @@ -147,15 +140,6 @@ void make_bi_recs(unsigned long addr, char *name, unsigned int mach, rec->size = sizeof(struct bi_record) + 2 * sizeof(unsigned long); rec = (struct bi_record *)((unsigned long)rec + rec->size); - if (sysmap_size) { - rec->tag = BI_SYSMAP; - rec->data[0] = (unsigned long)(&__sysmap_begin); - rec->data[1] = sysmap_size; - rec->size = sizeof(struct bi_record) + 2 * - sizeof(unsigned long); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - } - rec->tag = BI_LAST; rec->size = sizeof(struct bi_record); rec = (struct bi_record *)((unsigned long)rec + rec->size); diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index c28061ad598..991b4cbb83c 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -203,7 +203,7 @@ $(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ $(obj)/dummy.o $(obj)/image.o $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr -R .ramdisk -R .sysmap + -R .stabstr -R .ramdisk $(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ $(images)/vmlinux.gz $(obj)/dummy.o @@ -215,7 +215,7 @@ $(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ $(obj)/dummy.o $(obj)/image.o $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr -R .sysmap + -R .stabstr # Sort-of dummy rules, that let us format the image we want. zImage: $(images)/$(zimage-y) $(obj)/zvmlinux diff --git a/arch/ppc/boot/utils/addSystemMap.c b/arch/ppc/boot/utils/addSystemMap.c deleted file mode 100644 index 4654f891b27..00000000000 --- a/arch/ppc/boot/utils/addSystemMap.c +++ /dev/null @@ -1,186 +0,0 @@ -#include <stdio.h> -#include <stdlib.h> -#include <byteswap.h> -#include <sys/types.h> -#include <sys/stat.h> - -void xlate( char * inb, char * trb, unsigned len ) -{ - unsigned i; - for ( i=0; i<len; ++i ) { - char c = *inb++; - char c1 = c >> 4; - char c2 = c & 0xf; - if ( c1 > 9 ) - c1 = c1 + 'A' - 10; - else - c1 = c1 + '0'; - if ( c2 > 9 ) - c2 = c2 + 'A' - 10; - else - c2 = c2 + '0'; - *trb++ = c1; - *trb++ = c2; - } - *trb = 0; -} - -#define ElfHeaderSize (64 * 1024) -#define ElfPages (ElfHeaderSize / 4096) -#define KERNELBASE (0xc0000000) - -void get4k( /*istream *inf*/FILE *file, char *buf ) -{ - unsigned j; - unsigned num = fread(buf, 1, 4096, file); - for ( j=num; j<4096; ++j ) - buf[j] = 0; -} - -void put4k( /*ostream *outf*/FILE *file, char *buf ) -{ - fwrite(buf, 1, 4096, file); -} - -int main(int argc, char **argv) -{ - char inbuf[4096]; - FILE *ramDisk = NULL; - FILE *inputVmlinux = NULL; - FILE *outputVmlinux = NULL; - unsigned i = 0; - unsigned long ramFileLen = 0; - unsigned long ramLen = 0; - unsigned long roundR = 0; - unsigned long kernelLen = 0; - unsigned long actualKernelLen = 0; - unsigned long round = 0; - unsigned long roundedKernelLen = 0; - unsigned long ramStartOffs = 0; - unsigned long ramPages = 0; - unsigned long roundedKernelPages = 0; - if ( argc < 2 ) { - printf("Name of System Map file missing.\n"); - exit(1); - } - - if ( argc < 3 ) { - printf("Name of vmlinux file missing.\n"); - exit(1); - } - - if ( argc < 4 ) { - printf("Name of vmlinux output file missing.\n"); - exit(1); - } - - ramDisk = fopen(argv[1], "r"); - if ( ! ramDisk ) { - printf("System Map file \"%s\" failed to open.\n", argv[1]); - exit(1); - } - inputVmlinux = fopen(argv[2], "r"); - if ( ! inputVmlinux ) { - printf("vmlinux file \"%s\" failed to open.\n", argv[2]); - exit(1); - } - outputVmlinux = fopen(argv[3], "w"); - if ( ! outputVmlinux ) { - printf("output vmlinux file \"%s\" failed to open.\n", argv[3]); - exit(1); - } - fseek(ramDisk, 0, SEEK_END); - ramFileLen = ftell(ramDisk); - fseek(ramDisk, 0, SEEK_SET); - printf("%s file size = %ld\n", argv[1], ramFileLen); - - ramLen = ramFileLen; - - roundR = 4096 - (ramLen % 4096); - if ( roundR ) { - printf("Rounding System Map file up to a multiple of 4096, adding %ld\n", roundR); - ramLen += roundR; - } - - printf("Rounded System Map size is %ld\n", ramLen); - fseek(inputVmlinux, 0, SEEK_END); - kernelLen = ftell(inputVmlinux); - fseek(inputVmlinux, 0, SEEK_SET); - printf("kernel file size = %ld\n", kernelLen); - if ( kernelLen == 0 ) { - printf("You must have a linux kernel specified as argv[2]\n"); - exit(1); - } - - actualKernelLen = kernelLen - ElfHeaderSize; - - printf("actual kernel length (minus ELF header) = %ld\n", actualKernelLen); - - round = actualKernelLen % 4096; - roundedKernelLen = actualKernelLen; - if ( round ) - roundedKernelLen += (4096 - round); - - printf("actual kernel length rounded up to a 4k multiple = %ld\n", roundedKernelLen); - - ramStartOffs = roundedKernelLen; - ramPages = ramLen / 4096; - - printf("System map pages to copy = %ld\n", ramPages); - - // Copy 64K ELF header - for (i=0; i<(ElfPages); ++i) { - get4k( inputVmlinux, inbuf ); - put4k( outputVmlinux, inbuf ); - } - - - - roundedKernelPages = roundedKernelLen / 4096; - - fseek(inputVmlinux, ElfHeaderSize, SEEK_SET); - - { - for ( i=0; i<roundedKernelPages; ++i ) { - get4k( inputVmlinux, inbuf ); - if ( i == 0 ) { - unsigned long * p; - printf("Storing embedded_sysmap_start at 0x3c\n"); - p = (unsigned long *)(inbuf + 0x3c); - -#if (BYTE_ORDER == __BIG_ENDIAN) - *p = ramStartOffs; -#else - *p = bswap_32(ramStartOffs); -#endif - - printf("Storing embedded_sysmap_end at 0x44\n"); - p = (unsigned long *)(inbuf + 0x44); -#if (BYTE_ORDER == __BIG_ENDIAN) - *p = ramStartOffs + ramFileLen; -#else - *p = bswap_32(ramStartOffs + ramFileLen); -#endif - } - put4k( outputVmlinux, inbuf ); - } - } - - { - for ( i=0; i<ramPages; ++i ) { - get4k( ramDisk, inbuf ); - put4k( outputVmlinux, inbuf ); - } - } - - - fclose(ramDisk); - fclose(inputVmlinux); - fclose(outputVmlinux); - /* Set permission to executable */ - chmod(argv[3], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); - - return 0; - -} - diff --git a/arch/ppc/configs/mpc8548_cds_defconfig b/arch/ppc/configs/mpc8548_cds_defconfig new file mode 100644 index 00000000000..abe034f24b8 --- /dev/null +++ b/arch/ppc/configs/mpc8548_cds_defconfig @@ -0,0 +1,659 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc4 +# Tue May 24 22:36:27 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_CPU_FREQ is not set +# CONFIG_PM is not set +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +CONFIG_MPC8548_CDS=y +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +CONFIG_MPC8548=y + +# +# Platform options +# +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y + +# +# Ethernet (1000 Mbit) +# +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ISA is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Hardware Sensors Chip support +# +# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set + +# +# Other I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig index 728bd9e1a8f..15abebf46b9 100644 --- a/arch/ppc/configs/mpc8555_cds_defconfig +++ b/arch/ppc/configs/mpc8555_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc1 -# Thu Jan 20 01:25:35 2005 +# Linux kernel version: 2.6.12-rc4 +# Tue May 17 11:56:01 2005 # CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y CONFIG_PPC=y CONFIG_PPC32=y CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # # Code maturity level options @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -29,12 +31,14 @@ CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y # CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -44,6 +48,7 @@ CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -62,10 +67,12 @@ CONFIG_CC_ALIGN_JUMPS=0 CONFIG_E500=y CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_MATH_EMULATION=y # CONFIG_CPU_FREQ is not set CONFIG_PPC_GEN550=y +# CONFIG_PM is not set CONFIG_85xx=y CONFIG_PPC_INDIRECT_PCI_BE=y @@ -76,6 +83,7 @@ CONFIG_PPC_INDIRECT_PCI_BE=y CONFIG_MPC8555_CDS=y # CONFIG_MPC8560_ADS is not set # CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set CONFIG_MPC8555=y CONFIG_85xx_PCI2=y @@ -90,6 +98,7 @@ CONFIG_CPM2=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y # # Bus options @@ -105,10 +114,6 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges -# - -# # Advanced setup # # CONFIG_ADVANCED_OPTIONS is not set @@ -180,7 +185,59 @@ CONFIG_IOSCHED_CFQ=y # # ATA/ATAPI/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -220,7 +277,6 @@ CONFIG_NET=y # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -370,14 +426,6 @@ CONFIG_INPUT=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -387,6 +435,13 @@ CONFIG_SOUND_GAMEPORT=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# # Character devices # # CONFIG_VT is not set @@ -406,6 +461,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -434,6 +490,11 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# # I2C support # CONFIG_I2C=y @@ -456,11 +517,11 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set @@ -483,7 +544,9 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -494,9 +557,11 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set @@ -506,10 +571,12 @@ CONFIG_I2C_MPC=y # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -538,7 +605,6 @@ CONFIG_I2C_MPC=y # Graphics support # # CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -548,13 +614,9 @@ CONFIG_I2C_MPC=y # # USB support # -# CONFIG_USB is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# +# CONFIG_USB is not set # # USB Gadget Support @@ -585,6 +647,10 @@ CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set + +# +# XFS support +# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -646,7 +712,6 @@ CONFIG_NFS_FS=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -698,7 +763,9 @@ CONFIG_CRC32=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_KGDB_CONSOLE is not set # CONFIG_SERIAL_TEXT_DEBUG is not set diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index 8aa5e8c6900..01c226008db 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -838,6 +838,17 @@ struct cpu_spec cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, }, + { /* 405EP */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x51210000, + .cpu_name = "405EP", + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .icache_bsize = 32, + .dcache_bsize = 32, + }, #endif /* CONFIG_40x */ #ifdef CONFIG_44x @@ -907,6 +918,20 @@ struct cpu_spec cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, }, + { /* e500v2 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x80210000, + .cpu_name = "e500v2", + /* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */ + .cpu_features = CPU_FTR_SPLIT_ID_CACHE | + CPU_FTR_USE_TB | CPU_FTR_BIG_PHYS, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_SPE_COMP | + PPC_FEATURE_HAS_EFP_SINGLE | PPC_FEATURE_HAS_EFP_DOUBLE, + .icache_bsize = 32, + .dcache_bsize = 32, + .num_pmcs = 4, + }, #endif #if !CLASSIC_PPC { /* default match */ diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 5f075dbc4ee..8377b6ca26d 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -46,26 +46,23 @@ #ifdef CONFIG_BOOKE #include "head_booke.h" +#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level) \ + mtspr exc_level##_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(exc_level); \ + lwz r0,GPR10-INT_FRAME_SIZE(r8); \ + stw r0,GPR10(r11); \ + lwz r0,GPR11-INT_FRAME_SIZE(r8); \ + stw r0,GPR11(r11); \ + mfspr r8,exc_level##_SPRG + .globl mcheck_transfer_to_handler mcheck_transfer_to_handler: - mtspr MCHECK_SPRG,r8 - BOOKE_LOAD_MCHECK_STACK - lwz r0,GPR10-INT_FRAME_SIZE(r8) - stw r0,GPR10(r11) - lwz r0,GPR11-INT_FRAME_SIZE(r8) - stw r0,GPR11(r11) - mfspr r8,MCHECK_SPRG + TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK) b transfer_to_handler_full .globl crit_transfer_to_handler crit_transfer_to_handler: - mtspr CRIT_SPRG,r8 - BOOKE_LOAD_CRIT_STACK - lwz r0,GPR10-INT_FRAME_SIZE(r8) - stw r0,GPR10(r11) - lwz r0,GPR11-INT_FRAME_SIZE(r8) - stw r0,GPR11(r11) - mfspr r8,CRIT_SPRG + TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT) /* fall through */ #endif @@ -202,7 +199,7 @@ _GLOBAL(DoSyscall) rlwinm r11,r11,0,~_TIFL_FORCE_NOERROR stw r11,TI_LOCAL_FLAGS(r10) lwz r11,TI_FLAGS(r10) - andi. r11,r11,_TIF_SYSCALL_TRACE + andi. r11,r11,_TIF_SYSCALL_T_OR_A bne- syscall_dotrace syscall_dotrace_cont: cmplwi 0,r0,NR_syscalls @@ -237,7 +234,7 @@ ret_from_syscall: SYNC MTMSRD(r10) lwz r9,TI_FLAGS(r12) - andi. r0,r9,(_TIF_SYSCALL_TRACE|_TIF_SIGPENDING|_TIF_NEED_RESCHED) + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED) bne- syscall_exit_work syscall_exit_cont: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) @@ -277,7 +274,8 @@ syscall_dotrace: SAVE_NVGPRS(r1) li r0,0xc00 stw r0,TRAP(r1) - bl do_syscall_trace + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_syscall_trace_enter lwz r0,GPR0(r1) /* Restore original registers */ lwz r3,GPR3(r1) lwz r4,GPR4(r1) @@ -291,7 +289,7 @@ syscall_dotrace: syscall_exit_work: stw r6,RESULT(r1) /* Save result */ stw r3,GPR3(r1) /* Update return value */ - andi. r0,r9,_TIF_SYSCALL_TRACE + andi. r0,r9,_TIF_SYSCALL_T_OR_A beq 5f ori r10,r10,MSR_EE SYNC @@ -303,7 +301,8 @@ syscall_exit_work: li r4,0xc00 stw r4,TRAP(r1) 4: - bl do_syscall_trace + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_syscall_trace_leave REST_NVGPRS(r1) 2: lwz r3,GPR3(r1) @@ -627,8 +626,8 @@ sigreturn_exit: subi r1,r3,STACK_FRAME_OVERHEAD rlwinm r12,r1,0,0,18 /* current_thread_info() */ lwz r9,TI_FLAGS(r12) - andi. r0,r9,_TIF_SYSCALL_TRACE - bnel- do_syscall_trace + andi. r0,r9,_TIF_SYSCALL_T_OR_A + bnel- do_syscall_trace_leave /* fall through */ .globl ret_from_except_full @@ -781,99 +780,64 @@ exc_exit_restart_end: * time of the critical interrupt. * */ - .globl ret_from_crit_exc -ret_from_crit_exc: - REST_NVGPRS(r1) - lwz r3,_MSR(r1) - andi. r3,r3,MSR_PR - LOAD_MSR_KERNEL(r10,MSR_KERNEL) - bne user_exc_return - - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - REST_4GPRS(3, r1) - REST_2GPRS(7, r1) - - lwz r10,_XER(r1) - lwz r11,_CTR(r1) - mtspr SPRN_XER,r10 - mtctr r11 - - PPC405_ERR77(0,r1) - stwcx. r0,0,r1 /* to clear the reservation */ - - lwz r11,_LINK(r1) - mtlr r11 - lwz r10,_CCR(r1) - mtcrf 0xff,r10 #ifdef CONFIG_40x - /* avoid any possible TLB misses here by turning off MSR.DR, we - * assume the instructions here are mapped by a pinned TLB entry */ - li r10,MSR_IR - mtmsr r10 - isync - tophys(r1, r1) +#define PPC_40x_TURN_OFF_MSR_DR \ + /* avoid any possible TLB misses here by turning off MSR.DR, we \ + * assume the instructions here are mapped by a pinned TLB entry */ \ + li r10,MSR_IR; \ + mtmsr r10; \ + isync; \ + tophys(r1, r1); +#else +#define PPC_40x_TURN_OFF_MSR_DR #endif - lwz r9,_DEAR(r1) - lwz r10,_ESR(r1) - mtspr SPRN_DEAR,r9 - mtspr SPRN_ESR,r10 - lwz r11,_NIP(r1) - lwz r12,_MSR(r1) - mtspr SPRN_CSRR0,r11 - mtspr SPRN_CSRR1,r12 - lwz r9,GPR9(r1) - lwz r12,GPR12(r1) - lwz r10,GPR10(r1) - lwz r11,GPR11(r1) - lwz r1,GPR1(r1) - PPC405_ERR77_SYNC - rfci - b . /* prevent prefetch past rfci */ + +#define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi) \ + REST_NVGPRS(r1); \ + lwz r3,_MSR(r1); \ + andi. r3,r3,MSR_PR; \ + LOAD_MSR_KERNEL(r10,MSR_KERNEL); \ + bne user_exc_return; \ + lwz r0,GPR0(r1); \ + lwz r2,GPR2(r1); \ + REST_4GPRS(3, r1); \ + REST_2GPRS(7, r1); \ + lwz r10,_XER(r1); \ + lwz r11,_CTR(r1); \ + mtspr SPRN_XER,r10; \ + mtctr r11; \ + PPC405_ERR77(0,r1); \ + stwcx. r0,0,r1; /* to clear the reservation */ \ + lwz r11,_LINK(r1); \ + mtlr r11; \ + lwz r10,_CCR(r1); \ + mtcrf 0xff,r10; \ + PPC_40x_TURN_OFF_MSR_DR; \ + lwz r9,_DEAR(r1); \ + lwz r10,_ESR(r1); \ + mtspr SPRN_DEAR,r9; \ + mtspr SPRN_ESR,r10; \ + lwz r11,_NIP(r1); \ + lwz r12,_MSR(r1); \ + mtspr exc_lvl_srr0,r11; \ + mtspr exc_lvl_srr1,r12; \ + lwz r9,GPR9(r1); \ + lwz r12,GPR12(r1); \ + lwz r10,GPR10(r1); \ + lwz r11,GPR11(r1); \ + lwz r1,GPR1(r1); \ + PPC405_ERR77_SYNC; \ + exc_lvl_rfi; \ + b .; /* prevent prefetch past exc_lvl_rfi */ + + .globl ret_from_crit_exc +ret_from_crit_exc: + RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI) #ifdef CONFIG_BOOKE -/* - * Return from a machine check interrupt, similar to a critical - * interrupt. - */ .globl ret_from_mcheck_exc ret_from_mcheck_exc: - REST_NVGPRS(r1) - lwz r3,_MSR(r1) - andi. r3,r3,MSR_PR - LOAD_MSR_KERNEL(r10,MSR_KERNEL) - bne user_exc_return - - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - REST_4GPRS(3, r1) - REST_2GPRS(7, r1) - - lwz r10,_XER(r1) - lwz r11,_CTR(r1) - mtspr SPRN_XER,r10 - mtctr r11 - - stwcx. r0,0,r1 /* to clear the reservation */ - - lwz r11,_LINK(r1) - mtlr r11 - lwz r10,_CCR(r1) - mtcrf 0xff,r10 - lwz r9,_DEAR(r1) - lwz r10,_ESR(r1) - mtspr SPRN_DEAR,r9 - mtspr SPRN_ESR,r10 - lwz r11,_NIP(r1) - lwz r12,_MSR(r1) - mtspr SPRN_MCSRR0,r11 - mtspr SPRN_MCSRR1,r12 - lwz r9,GPR9(r1) - lwz r12,GPR12(r1) - lwz r10,GPR10(r1) - lwz r11,GPR11(r1) - lwz r1,GPR1(r1) - RFMCI + RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI) #endif /* CONFIG_BOOKE */ /* diff --git a/arch/ppc/kernel/head_4xx.S b/arch/ppc/kernel/head_4xx.S index 6f5d380e234..23fb51819ba 100644 --- a/arch/ppc/kernel/head_4xx.S +++ b/arch/ppc/kernel/head_4xx.S @@ -291,8 +291,9 @@ label: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l li r9, 0 @@ -479,8 +480,9 @@ label: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l li r9, 0 @@ -578,8 +580,9 @@ label: /* If we are faulting a kernel address, we have to use the * kernel page tables. */ - andis. r11, r10, 0x8000 - beq 3f + lis r11, TASK_SIZE@h + cmplw r10, r11 + blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l li r9, 0 diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index f213d12eec0..9c50f9d2657 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h @@ -67,46 +67,36 @@ #define CRIT_STACK_TOP (exception_stack_top) #ifdef CONFIG_SMP -#define BOOKE_LOAD_CRIT_STACK \ +#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ mfspr r8,SPRN_PIR; \ mulli r8,r8,BOOKE_EXCEPTION_STACK_SIZE; \ neg r8,r8; \ - addis r8,r8,CRIT_STACK_TOP@ha; \ - addi r8,r8,CRIT_STACK_TOP@l -#define BOOKE_LOAD_MCHECK_STACK \ - mfspr r8,SPRN_PIR; \ - mulli r8,r8,BOOKE_EXCEPTION_STACK_SIZE; \ - neg r8,r8; \ - addis r8,r8,MCHECK_STACK_TOP@ha; \ - addi r8,r8,MCHECK_STACK_TOP@l + addis r8,r8,level##_STACK_TOP@ha; \ + addi r8,r8,level##_STACK_TOP@l #else -#define BOOKE_LOAD_CRIT_STACK \ - lis r8,CRIT_STACK_TOP@h; \ - ori r8,r8,CRIT_STACK_TOP@l -#define BOOKE_LOAD_MCHECK_STACK \ - lis r8,MCHECK_STACK_TOP@h; \ - ori r8,r8,MCHECK_STACK_TOP@l +#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \ + lis r8,level##_STACK_TOP@h; \ + ori r8,r8,level##_STACK_TOP@l #endif /* - * Exception prolog for critical exceptions. This is a little different - * from the normal exception prolog above since a critical exception - * can potentially occur at any point during normal exception processing. - * Thus we cannot use the same SPRG registers as the normal prolog above. - * Instead we use a portion of the critical exception stack at low physical - * addresses. + * Exception prolog for critical/machine check exceptions. This is a + * little different from the normal exception prolog above since a + * critical/machine check exception can potentially occur at any point + * during normal exception processing. Thus we cannot use the same SPRG + * registers as the normal prolog above. Instead we use a portion of the + * critical/machine check exception stack at low physical addresses. */ - -#define CRITICAL_EXCEPTION_PROLOG \ - mtspr CRIT_SPRG,r8; \ - BOOKE_LOAD_CRIT_STACK; /* r8 points to the crit stack */ \ +#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \ + mtspr exc_level##_SPRG,r8; \ + BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \ stw r10,GPR10-INT_FRAME_SIZE(r8); \ stw r11,GPR11-INT_FRAME_SIZE(r8); \ mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_CSRR1; /* check whether user or kernel */\ + mfspr r11,exc_level_srr1; /* check whether user or kernel */\ andi. r11,r11,MSR_PR; \ mr r11,r8; \ - mfspr r8,CRIT_SPRG; \ + mfspr r8,exc_level##_SPRG; \ beq 1f; \ /* COMING FROM USER MODE */ \ mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ @@ -122,9 +112,9 @@ stw r12,_DEAR(r11); /* since they may have had stuff */\ mfspr r9,SPRN_ESR; /* in them at the point where the */\ stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,SPRN_CSRR0; \ + mfspr r12,exc_level_srr0; \ stw r1,GPR1(r11); \ - mfspr r9,SPRN_CSRR1; \ + mfspr r9,exc_level_srr1; \ stw r1,0(r11); \ mr r1,r11; \ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ @@ -132,45 +122,10 @@ SAVE_4GPRS(3, r11); \ SAVE_2GPRS(7, r11) -/* - * Exception prolog for machine check exceptions. This is similar to - * the critical exception prolog, except that machine check exceptions - * have their stack. - */ -#define MCHECK_EXCEPTION_PROLOG \ - mtspr MCHECK_SPRG,r8; \ - BOOKE_LOAD_MCHECK_STACK; /* r8 points to the mcheck stack */\ - stw r10,GPR10-INT_FRAME_SIZE(r8); \ - stw r11,GPR11-INT_FRAME_SIZE(r8); \ - mfcr r10; /* save CR in r10 for now */\ - mfspr r11,SPRN_MCSRR1; /* check whether user or kernel */\ - andi. r11,r11,MSR_PR; \ - mr r11,r8; \ - mfspr r8,MCHECK_SPRG; \ - beq 1f; \ - /* COMING FROM USER MODE */ \ - mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\ - lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\ - addi r11,r11,THREAD_SIZE; \ -1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\ - stw r10,_CCR(r11); /* save various registers */\ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\ - stw r12,_DEAR(r11); /* since they may have had stuff */\ - mfspr r9,SPRN_ESR; /* in them at the point where the */\ - stw r9,_ESR(r11); /* exception was taken */\ - mfspr r12,SPRN_MCSRR0; \ - stw r1,GPR1(r11); \ - mfspr r9,SPRN_MCSRR1; \ - stw r1,0(r11); \ - mr r1,r11; \ - rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\ - stw r0,GPR0(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) +#define CRITICAL_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1) +#define MCHECK_EXCEPTION_PROLOG \ + EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1) /* * Exception vectors. @@ -237,7 +192,6 @@ label: EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \ ret_from_except) - /* Check for a single step debug exception while in an exception * handler before state has been saved. This is to catch the case * where an instruction that we are trying to single step causes @@ -291,7 +245,7 @@ label: lwz r9,GPR9(r11); \ lwz r12,GPR12(r11); \ mtspr CRIT_SPRG,r8; \ - BOOKE_LOAD_CRIT_STACK; /* r8 points to the crit stack */ \ + BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \ lwz r10,GPR10-INT_FRAME_SIZE(r8); \ lwz r11,GPR11-INT_FRAME_SIZE(r8); \ mfspr r8,CRIT_SPRG; \ diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index f22ddce3613..ce36e88ba62 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -232,7 +232,8 @@ skpinv: addi r6,r6,1 /* Increment */ tlbwe /* 7. Jump to KERNELBASE mapping */ - li r7,0 + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l bl 1f /* Find our address */ 1: mflr r9 rlwimi r6,r9,0,20,31 @@ -293,6 +294,18 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_HID0, r2 #endif +#if !defined(CONFIG_BDI_SWITCH) + /* + * The Abatron BDI JTAG debugger does not tolerate others + * mucking with the debug registers. + */ + lis r2,DBCR0_IDM@h + mtspr SPRN_DBCR0,r2 + /* clear any residual debug events */ + li r2,-1 + mtspr SPRN_DBSR,r2 +#endif + /* * This is where the main kernel code starts. */ diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index e4f1615ec13..7329ef177a1 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -619,7 +619,7 @@ _GLOBAL(flush_instruction_cache) _GLOBAL(flush_icache_range) BEGIN_FTR_SECTION blr /* for 601, do nothing */ -END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) li r5,L1_CACHE_LINE_SIZE-1 andc r3,r3,r5 subf r4,r3,r4 @@ -736,7 +736,7 @@ _GLOBAL(flush_dcache_all) _GLOBAL(__flush_dcache_icache) BEGIN_FTR_SECTION blr /* for 601, do nothing */ -END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) rlwinm r3,r3,0,0,19 /* Get page base address */ li r4,4096/L1_CACHE_LINE_SIZE /* Number of lines in a page */ mtctr r4 @@ -764,7 +764,7 @@ END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) _GLOBAL(__flush_dcache_icache_phys) BEGIN_FTR_SECTION blr /* for 601, do nothing */ -END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE) +END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE) mfmsr r10 rlwinm r0,r10,0,28,26 /* clear DR */ mtmsr r0 diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 47a15306823..6d7b92d7245 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -1003,7 +1003,7 @@ pci_create_OF_bus_map(void) } } -static ssize_t pci_show_devspec(struct device *dev, char *buf) +static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct pci_dev *pdev; struct device_node *np; diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 2ccb58fe4fc..d59ad07de8e 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -55,7 +55,6 @@ #define EXPORT_SYMTAB_STROPS extern void transfer_to_handler(void); -extern void do_syscall_trace(void); extern void do_IRQ(struct pt_regs *regs); extern void MachineCheckException(struct pt_regs *regs); extern void AlignmentException(struct pt_regs *regs); @@ -74,7 +73,6 @@ extern unsigned long mm_ptov (unsigned long paddr); EXPORT_SYMBOL(clear_pages); EXPORT_SYMBOL(clear_user_page); EXPORT_SYMBOL(do_signal); -EXPORT_SYMBOL(do_syscall_trace); EXPORT_SYMBOL(transfer_to_handler); EXPORT_SYMBOL(do_IRQ); EXPORT_SYMBOL(MachineCheckException); diff --git a/arch/ppc/kernel/ptrace.c b/arch/ppc/kernel/ptrace.c index 59d59a8dc24..e7aee4108de 100644 --- a/arch/ppc/kernel/ptrace.c +++ b/arch/ppc/kernel/ptrace.c @@ -27,6 +27,9 @@ #include <linux/user.h> #include <linux/security.h> #include <linux/signal.h> +#include <linux/seccomp.h> +#include <linux/audit.h> +#include <linux/module.h> #include <asm/uaccess.h> #include <asm/page.h> @@ -455,11 +458,10 @@ out: return ret; } -void do_syscall_trace(void) +static void do_syscall_trace(void) { - if (!test_thread_flag(TIF_SYSCALL_TRACE) - || !(current->ptrace & PT_PTRACED)) - return; + /* the 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); @@ -473,3 +475,33 @@ void do_syscall_trace(void) current->exit_code = 0; } } + +void do_syscall_trace_enter(struct pt_regs *regs) +{ + if (test_thread_flag(TIF_SYSCALL_TRACE) + && (current->ptrace & PT_PTRACED)) + do_syscall_trace(); + + if (unlikely(current->audit_context)) + audit_syscall_entry(current, AUDIT_ARCH_PPC, + regs->gpr[0], + regs->gpr[3], regs->gpr[4], + regs->gpr[5], regs->gpr[6]); +} + +void do_syscall_trace_leave(struct pt_regs *regs) +{ + secure_computing(regs->gpr[0]); + + if (unlikely(current->audit_context)) + audit_syscall_exit(current, + (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, + regs->result); + + if ((test_thread_flag(TIF_SYSCALL_TRACE)) + && (current->ptrace & PT_PTRACED)) + do_syscall_trace(); +} + +EXPORT_SYMBOL(do_syscall_trace_enter); +EXPORT_SYMBOL(do_syscall_trace_leave); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 5c20266e3b1..c42f7532693 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -41,7 +41,7 @@ #include <asm/xmon.h> #include <asm/ocp.h> -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) +#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE) #include <asm/ppc_sys.h> #endif @@ -61,8 +61,6 @@ extern void power4_idle(void); extern boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; -char *sysmap; -unsigned long sysmap_size; /* Used with the BI_MEMSIZE bootinfo parameter to store the memory size value reported by the boot loader. */ @@ -249,7 +247,7 @@ int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "bogomips\t: %lu.%02lu\n", lpj / (500000/HZ), (lpj / (5000/HZ)) % 100); -#if defined(CONFIG_85xx) || defined(CONFIG_83xx) +#if defined(CONFIG_85xx) || defined(CONFIG_83xx) || defined(CONFIG_MPC10X_BRIDGE) if (cur_ppc_sys_spec->ppc_sys_name) seq_printf(m, "chipset\t\t: %s\n", cur_ppc_sys_spec->ppc_sys_name); @@ -578,11 +576,6 @@ void parse_bootinfo(struct bi_record *rec) case BI_CMD_LINE: strlcpy(cmd_line, (void *)data, sizeof(cmd_line)); break; - case BI_SYSMAP: - sysmap = (char *)((data[0] >= (KERNELBASE)) ? data[0] : - (data[0]+KERNELBASE)); - sysmap_size = data[1]; - break; #ifdef CONFIG_BLK_DEV_INITRD case BI_INITRD: initrd_start = data[0] + KERNELBASE; diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index f8e7e324a17..2ca8ecfeefd 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -81,8 +81,10 @@ void die(const char * str, struct pt_regs * fp, long err) console_verbose(); spin_lock_irq(&die_lock); #ifdef CONFIG_PMAC_BACKLIGHT - set_backlight_enable(1); - set_backlight_level(BACKLIGHT_MAX); + if (_machine == _MACH_Pmac) { + set_backlight_enable(1); + set_backlight_level(BACKLIGHT_MAX); + } #endif printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); #ifdef CONFIG_PREEMPT @@ -408,12 +410,7 @@ static int emulate_string_inst(struct pt_regs *regs, u32 instword) /* Early out if we are an invalid form of lswx */ if ((instword & INST_STRING_MASK) == INST_LSWX) - if ((rA >= rT) || (NB_RB >= rT) || (rT == rA) || (rT == NB_RB)) - return -EINVAL; - - /* Early out if we are an invalid form of lswi */ - if ((instword & INST_STRING_MASK) == INST_LSWI) - if ((rA >= rT) || (rT == rA)) + if ((rT == rA) || (rT == NB_RB)) return -EINVAL; EA = (rA == 0) ? 0 : regs->gpr[rA]; diff --git a/arch/ppc/lib/locks.c b/arch/ppc/lib/locks.c index 694163d696d..c450dc4b766 100644 --- a/arch/ppc/lib/locks.c +++ b/arch/ppc/lib/locks.c @@ -130,7 +130,7 @@ void _raw_read_lock(rwlock_t *rw) while (!read_can_lock(rw)) { if (--stuck == 0) { printk("_read_lock(%p) CPU#%d lock %d\n", - rw, _smp_processor_id(), rw->lock); + rw, raw_smp_processor_id(), rw->lock); stuck = INIT_STUCK; } } @@ -158,7 +158,7 @@ void _raw_write_lock(rwlock_t *rw) while (!write_can_lock(rw)) { if (--stuck == 0) { printk("write_lock(%p) CPU#%d lock %d)\n", - rw, _smp_processor_id(), rw->lock); + rw, raw_smp_processor_id(), rw->lock); stuck = INIT_STUCK; } } diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c index 36233bdcdf8..e07990efa04 100644 --- a/arch/ppc/mm/fsl_booke_mmu.c +++ b/arch/ppc/mm/fsl_booke_mmu.c @@ -64,6 +64,8 @@ extern unsigned long total_lowmem; extern unsigned long __max_low_memory; #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE +#define NUM_TLBCAMS (16) + struct tlbcam { u32 MAS0; u32 MAS1; diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 363c157e361..334ef4150d9 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -96,9 +96,6 @@ extern struct task_struct *current_set[NR_CPUS]; char *klimit = _end; struct mem_pieces phys_avail; -extern char *sysmap; -extern unsigned long sysmap_size; - /* * this tells the system to map all of ram with the segregs * (i.e. page tables) instead of the bats. @@ -442,12 +439,6 @@ void __init mem_init(void) if (agp_special_page) SetPageReserved(virt_to_page(agp_special_page)); #endif - if ( sysmap ) - for (addr = (unsigned long)sysmap; - addr < PAGE_ALIGN((unsigned long)sysmap+sysmap_size) ; - addr += PAGE_SIZE) - SetPageReserved(virt_to_page(addr)); - for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory; addr += PAGE_SIZE) { if (!PageReserved(virt_to_page(addr))) @@ -469,7 +460,6 @@ void __init mem_init(void) struct page *page = mem_map + pfn; ClearPageReserved(page); - set_bit(PG_highmem, &page->flags); set_page_count(page, 1); __free_page(page); totalhigh_pages++; @@ -483,9 +473,7 @@ void __init mem_init(void) codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10), initpages<< (PAGE_SHIFT-10), (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); - if (sysmap) - printk("System.map loaded at 0x%08x for debugger, size: %ld bytes\n", - (unsigned int)sysmap, sysmap_size); + #ifdef CONFIG_PPC_PMAC if (agp_special_page) printk(KERN_INFO "AGP special page: 0x%08lx\n", agp_special_page); @@ -535,9 +523,6 @@ set_phys_avail(unsigned long total_memory) if (rtas_data) mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1); #endif - /* remove the sysmap pages from the available memory */ - if (sysmap) - mem_pieces_remove(&phys_avail, __pa(sysmap), sysmap_size, 1); #ifdef CONFIG_PPC_PMAC /* Because of some uninorth weirdness, we need a page of * memory as high as possible (it must be outside of the diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h index ffcdb46997d..540f3292b22 100644 --- a/arch/ppc/mm/mmu_decl.h +++ b/arch/ppc/mm/mmu_decl.h @@ -43,6 +43,8 @@ extern int mem_init_done; extern PTE *Hash, *Hash_end; extern unsigned long Hash_size, Hash_mask; +extern unsigned int num_tlbcam_entries; + /* ...and now those things that may be slightly different between processor * architectures. -- Dan */ diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 5d2f3f66aef..81a3d7446d3 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -66,7 +66,6 @@ void setbat(int index, unsigned long virt, unsigned long phys, #ifdef HAVE_TLBCAM extern unsigned int tlbcam_index; -extern unsigned int num_tlbcam_entries; extern unsigned long v_mapped_by_tlbcam(unsigned long va); extern unsigned long p_mapped_by_tlbcam(unsigned long pa); #else /* !HAVE_TLBCAM */ diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index b3b0f51979d..86ca5cf8126 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/ipic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -127,7 +126,6 @@ mpc834x_sys_map_io(void) { /* we steal the lowest ioremap addr for virt space */ io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO); - io_block_mapping(BCSR_VIRT_ADDR, BCSR_PHYS_ADDR, BCSR_SIZE, _PAGE_IO); } int diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index f4d055ae19c..a2f6e49d715 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -26,9 +26,14 @@ #define VIRT_IMMRBAR ((uint)0xfe000000) #define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_VIRT_ADDR ((uint)0xfe100000) #define BCSR_SIZE ((uint)(32 * 1024)) +#define BCSR_MISC_REG2_OFF 0x07 +#define BCSR_MISC_REG2_PORESET 0x01 + +#define BCSR_MISC_REG3_OFF 0x08 +#define BCSR_MISC_REG3_CNFLOCK 0x80 + #ifdef CONFIG_PCI /* PCI interrupt controller */ #define PIRQA MPC83xx_IRQ_IRQ4 diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig index ff92e38e7da..c5bc2821d99 100644 --- a/arch/ppc/platforms/85xx/Kconfig +++ b/arch/ppc/platforms/85xx/Kconfig @@ -21,6 +21,11 @@ config MPC8540_ADS help This option enables support for the MPC 8540 ADS evaluation board. +config MPC8548_CDS + bool "Freescale MPC8548 CDS" + help + This option enablese support for the MPC8548 CDS evaluation board. + config MPC8555_CDS bool "Freescale MPC8555 CDS" help @@ -53,6 +58,11 @@ config MPC8540 depends on MPC8540_ADS default y +config MPC8548 + bool + depends on MPC8548_CDS + default y + config MPC8555 bool depends on MPC8555_CDS diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile index 854fbd298ba..efdf813108f 100644 --- a/arch/ppc/platforms/85xx/Makefile +++ b/arch/ppc/platforms/85xx/Makefile @@ -2,6 +2,7 @@ # Makefile for the PowerPC 85xx linux kernel. # obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads_common.o mpc8540_ads.o +obj-$(CONFIG_MPC8548_CDS) += mpc85xx_cds_common.o obj-$(CONFIG_MPC8555_CDS) += mpc85xx_cds_common.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads_common.o mpc8560_ads.o obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 4d857d6d633..a2ed611cd93 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -88,7 +87,7 @@ mpc8540ads_setup_arch(void) #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Invalidate the entry we stole earlier the serial ports * should be properly mapped */ - invalidate_tlbcam_entry(NUM_TLBCAMS - 1); + invalidate_tlbcam_entry(num_tlbcam_entries - 1); #endif /* setup the board related information for the enet controllers */ @@ -150,7 +149,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, struct uart_port p; /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base, + settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); @@ -210,6 +209,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc8540ads_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index 761b8c7b25d..d87dfd5ce0a 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index ba9f9f562c4..18e952d1767 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -36,7 +36,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -59,40 +58,8 @@ extern unsigned long total_memory; /* in mm/init */ unsigned char __res[sizeof (bd_t)]; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ - static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + MPC85XX_INTERNAL_IRQ_SENSES, 0x0, /* External 0: */ #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */ @@ -159,7 +126,7 @@ mpc85xx_ads_init_IRQ(void) /* Skip reserved space and internal sources */ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); /* Map PIC IRQs 0-11 */ - openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* we let openpic interrupts starting from an offset, to * leave space for cascading interrupts underneath. diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 6c020d67ad7..203b2ca61df 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -42,8 +42,8 @@ #include <asm/todc.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> +#include <asm/i8259.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> #include <asm/mpc85xx.h> @@ -72,40 +72,8 @@ static int cds_pci_slot = 2; static volatile u8 * cadmus; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ - static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + MPC85XX_INTERNAL_IRQ_SENSES, #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */ @@ -189,15 +157,28 @@ mpc85xx_cds_init_IRQ(void) OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses); /* Skip reserved space and internal sources */ +#ifdef CONFIG_MPC8548 + openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200); +#else openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); +#endif /* Map PIC IRQs 0-11 */ - openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* we let openpic interrupts starting from an offset, to * leave space for cascading interrupts underneath. */ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); +#ifdef CONFIG_PCI + openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq); + + for (i = 0; i < NUM_8259_INTERRUPTS; i++) + irq_desc[i].handler = &i8259_pic; + + i8259_init(0); +#endif + #ifdef CONFIG_CPM2 /* Setup CPM2 PIC */ cpm2_init_IRQ(); @@ -231,7 +212,7 @@ mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) * interrupt on slot */ { { 0, 1, 2, 3 }, /* 16 - PMC */ - { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */ + { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ { 0, 1, 2, 3 }, /* 18 - Slot 1 */ { 1, 2, 3, 0 }, /* 19 - Slot 2 */ { 2, 3, 0, 1 }, /* 20 - Slot 3 */ @@ -280,13 +261,135 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_DEVICE_NOT_FOUND; #endif /* We explicitly do not go past the Tundra 320 Bridge */ - if (bus == 1) + if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; else return PCIBIOS_SUCCESSFUL; } + +void __init +mpc85xx_cds_enable_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* Configure P2P so that we can reach bus 1 */ + early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0); + early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1); + early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* Enable USB and IDE functions */ + early_write_config_byte(hose, 1, 0x10, 0x48, 0x08); +} + +void __init +mpc85xx_cds_fixup_via(struct pci_controller *hose) +{ + u32 pci_class; + u16 vid, did; + + early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); + if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) + return; + + /* + * Force the backplane P2P bridge to have a window + * open from 0x00000000-0x00001fff in PCI I/O space. + * This allows legacy I/O (i8259, etc) on the VIA + * southbridge to be accessed. + */ + early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00); + early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000); + early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10); + early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000); + + early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); + early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); + if ((vid != PCI_VENDOR_ID_VIA) || + (did != PCI_DEVICE_ID_VIA_82C686)) + return; + + /* + * Since the P2P window was forced to cover the fixed + * legacy I/O addresses, it is necessary to manually + * place the base addresses for the IDE and USB functions + * within this window. + */ + /* Function 1, IDE */ + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4); + early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0); + + /* Function 2, USB ports 0-1 */ + early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0); + + /* Function 3, USB ports 2-3 */ + early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80); + + /* Function 5, Power Management */ + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc); + early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8); + + /* Function 6, AC97 Interface */ + early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00); +} + +void __init +mpc85xx_cds_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + u_char c; + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_1, NULL))) { + /* + * U-Boot does not set the enable bits + * for the IDE device. Force them on here. + */ + pci_read_config_byte(dev, 0x40, &c); + c |= 0x03; /* IDE: Chip Enable Bits */ + pci_write_config_byte(dev, 0x40, c); + + /* + * Since only primary interface works, force the + * IDE function to standard primary IDE interrupt + * w/ 8259 offset + */ + dev->irq = 14; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + + /* + * Force legacy USB interrupt routing + */ + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, NULL))) { + dev->irq = 10; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); + } + + if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, dev))) { + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + } +} #endif /* CONFIG_PCI */ TODC_ALLOC(); @@ -328,6 +431,9 @@ mpc85xx_cds_setup_arch(void) loops_per_jiffy = freq / HZ; #ifdef CONFIG_PCI + /* VIA IDE configuration */ + ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; + /* setup PCI host bridges */ mpc85xx_setup_hose(); #endif @@ -339,26 +445,52 @@ mpc85xx_cds_setup_arch(void) #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Invalidate the entry we stole earlier the serial ports * should be properly mapped */ - invalidate_tlbcam_entry(NUM_TLBCAMS - 1); + invalidate_tlbcam_entry(num_tlbcam_entries - 1); #endif /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 0; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 1; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } + ppc_sys_device_remove(MPC85xx_eTSEC3); + ppc_sys_device_remove(MPC85xx_eTSEC4); #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -395,7 +527,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, struct uart_port p; /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base, + settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); @@ -459,6 +591,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("mpc85xx_cds_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h index 7627d77504b..12b292c6ae3 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h @@ -77,4 +77,7 @@ #define MPC85XX_PCI2_IO_SIZE 0x01000000 +#define NR_8259_INTS 16 +#define CPM_IRQ_OFFSET NR_8259_INTS + #endif /* __MACH_MPC85XX_CDS_H__ */ diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index 9ab05e590c3..3dbdd73618e 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -41,7 +41,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -125,7 +124,7 @@ sbc8560_setup_arch(void) #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Invalidate the entry we stole earlier the serial ports * should be properly mapped */ - invalidate_tlbcam_entry(NUM_TLBCAMS - 1); + invalidate_tlbcam_entry(num_tlbcam_entries - 1); #endif /* setup the board related information for the enet controllers */ @@ -176,7 +175,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(NUM_TLBCAMS - 1, UARTA_ADDR, + settlbcam(num_tlbcam_entries - 1, UARTA_ADDR, UARTA_ADDR, 0x1000, _PAGE_IO, 0); #endif @@ -221,6 +220,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = sbc8560_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ if (ppc_md.progress) ppc_md.progress("sbc8560_init(): exit", 0); diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c index 2d638c1c1bd..4f6d1ddd6fb 100644 --- a/arch/ppc/platforms/85xx/sbc85xx.c +++ b/arch/ppc/platforms/85xx/sbc85xx.c @@ -35,7 +35,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -59,40 +58,8 @@ unsigned long pci_dram_offset = 0; extern unsigned long total_memory; /* in mm/init */ /* Internal interrupts are all Level Sensitive, and Positive Polarity */ - static u_char sbc8560_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + MPC85XX_INTERNAL_IRQ_SENSES, 0x0, /* External 0: */ 0x0, /* External 1: */ #if defined(CONFIG_PCI) @@ -159,7 +126,7 @@ sbc8560_init_IRQ(void) /* Skip reserved space and internal sources */ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); /* Map PIC IRQs 0-11 */ - openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* we let openpic interrupts starting from an offset, to * leave space for cascading interrupts underneath. diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index bc95836e417..9455bb6b45e 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -46,7 +46,6 @@ #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/bootinfo.h> #include <asm/pci-bridge.h> @@ -72,38 +71,7 @@ unsigned long pci_dram_offset = 0; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ static u8 gp3_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + MPC85XX_INTERNAL_IRQ_SENSES, 0x0, /* External 0: */ #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */ @@ -200,7 +168,6 @@ static struct irqaction cpm2_irqaction = { static void __init gp3_init_IRQ(void) { - int i; bd_t *binfo = (bd_t *) __res; /* @@ -218,7 +185,7 @@ gp3_init_IRQ(void) openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); /* Map PIC IRQs 0-11 */ - openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* * Let openpic interrupts starting from an offset, to diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index f7fb2786cd5..5fdd4f607a4 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -83,16 +83,13 @@ static u32 frequency_gpio; static u32 slew_done_gpio; static int no_schedule; static int has_cpu_l2lve; - - -#define PMAC_CPU_LOW_SPEED 1 -#define PMAC_CPU_HIGH_SPEED 0 +static int is_pmu_based; /* There are only two frequency states for each processor. Values * are in kHz for the time being. */ -#define CPUFREQ_HIGH PMAC_CPU_HIGH_SPEED -#define CPUFREQ_LOW PMAC_CPU_LOW_SPEED +#define CPUFREQ_HIGH 0 +#define CPUFREQ_LOW 1 static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {CPUFREQ_HIGH, 0}, @@ -100,6 +97,11 @@ static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {0, CPUFREQ_TABLE_END}, }; +static struct freq_attr* pmac_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + static inline void local_delay(unsigned long ms) { if (no_schedule) @@ -269,6 +271,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) #ifdef DEBUG_FREQ printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); #endif + pmu_suspend(); + /* Disable all interrupt sources on openpic */ pic_prio = openpic_get_priority(); openpic_set_priority(0xf); @@ -343,6 +347,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) debug_calc_bogomips(); #endif + pmu_resume(); + preempt_enable(); return 0; @@ -355,7 +361,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) static unsigned long prev_l3cr; freqs.old = cur_freq; - freqs.new = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; freqs.cpu = smp_processor_id(); if (freqs.old == freqs.new) @@ -363,7 +369,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (speed_mode == PMAC_CPU_LOW_SPEED && + if (speed_mode == CPUFREQ_LOW && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if (l3cr & L3CR_L3E) { @@ -371,8 +377,8 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) _set_L3CR(0); } } - set_speed_proc(speed_mode == PMAC_CPU_LOW_SPEED); - if (speed_mode == PMAC_CPU_HIGH_SPEED && + set_speed_proc(speed_mode == CPUFREQ_LOW); + if (speed_mode == CPUFREQ_HIGH && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) @@ -380,7 +386,7 @@ static int __pmac do_set_cpu_speed(int speed_mode, int notify) } if (notify) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; + cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; return 0; } @@ -423,7 +429,8 @@ static int __pmac pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; policy->cur = cur_freq; - return cpufreq_frequency_table_cpuinfo(policy, &pmac_cpu_freqs[0]); + cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); + return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); } static u32 __pmac read_gpio(struct device_node *np) @@ -456,8 +463,8 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state) */ no_schedule = 1; sleep_freq = cur_freq; - if (cur_freq == low_freq) - do_set_cpu_speed(PMAC_CPU_HIGH_SPEED, 0); + if (cur_freq == low_freq && !is_pmu_based) + do_set_cpu_speed(CPUFREQ_HIGH, 0); return 0; } @@ -473,8 +480,8 @@ static int __pmac pmac_cpufreq_resume(struct cpufreq_policy *policy) * is that we force a switch to whatever it was, which is * probably high speed due to our suspend() routine */ - do_set_cpu_speed(sleep_freq == low_freq ? PMAC_CPU_LOW_SPEED - : PMAC_CPU_HIGH_SPEED, 0); + do_set_cpu_speed(sleep_freq == low_freq ? + CPUFREQ_LOW : CPUFREQ_HIGH, 0); no_schedule = 0; return 0; @@ -488,6 +495,7 @@ static struct cpufreq_driver pmac_cpufreq_driver = { .suspend = pmac_cpufreq_suspend, .resume = pmac_cpufreq_resume, .flags = CPUFREQ_PM_NO_WARN, + .attr = pmac_cpu_freqs_attr, .name = "powermac", .owner = THIS_MODULE, }; @@ -580,6 +588,7 @@ static int __pmac pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) return 1; hi_freq = (*value) / 1000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; return 0; } @@ -684,6 +693,7 @@ static int __init pmac_cpufreq_setup(void) hi_freq = cur_freq; low_freq = 400000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; } /* Else check for TiPb 400 & 500 */ else if (machine_is_compatible("PowerBook3,2")) { @@ -695,6 +705,7 @@ static int __init pmac_cpufreq_setup(void) hi_freq = cur_freq; low_freq = 300000; set_speed_proc = pmu_set_cpu_speed; + is_pmu_based = 1; } /* Else check for 750FX */ else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h index cf5e5dd06d6..067d9a5aebc 100644 --- a/arch/ppc/platforms/pq2ads.h +++ b/arch/ppc/platforms/pq2ads.h @@ -49,10 +49,10 @@ /* PCI interrupt controller */ #define PCI_INT_STAT_REG 0xF8200000 #define PCI_INT_MASK_REG 0xF8200004 -#define PIRQA (NR_SIU_INTS + 0) -#define PIRQB (NR_SIU_INTS + 1) -#define PIRQC (NR_SIU_INTS + 2) -#define PIRQD (NR_SIU_INTS + 3) +#define PIRQA (NR_CPM_INTS + 0) +#define PIRQB (NR_CPM_INTS + 1) +#define PIRQC (NR_CPM_INTS + 2) +#define PIRQD (NR_CPM_INTS + 3) /* * PCI memory map definitions for MPC8266ADS-PCI. @@ -68,28 +68,23 @@ * 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory */ -/* window for a PCI master to access MPC8266 memory */ -#define PCI_SLV_MEM_LOCAL 0x00000000 /* Local base */ -#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h + Here we should redefine what is unique for this board */ +#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */ +#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */ +#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */ -/* window for the processor to access PCI memory with prefetching */ -#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */ +#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */ -/* window for the processor to access PCI memory without prefetching */ -#define PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#if defined(CONFIG_ADS8272) +#define PCI_INT_TO_SIU SIU_INT_IRQ2 +#elif defined(CONFIG_PQ2FADS) +#define PCI_INT_TO_SIU SIU_INT_IRQ6 +#else +#warning PCI Bridge will be without interrupts support +#endif -/* window for the processor to access PCI I/O */ -#define PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ -#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ -#define PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ - -#define _IO_BASE PCI_MSTR_IO_LOCAL -#define _ISA_MEM_BASE PCI_MSTR_MEMIO_LOCAL -#define PCI_DRAM_OFFSET PCI_SLV_MEM_BUS #endif /* CONFIG_PCI */ #endif /* __MACH_ADS8260_DEFS */ diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c index 531bfa0e451..70e58f43f2b 100644 --- a/arch/ppc/platforms/sandpoint.c +++ b/arch/ppc/platforms/sandpoint.c @@ -81,6 +81,7 @@ #include <linux/serial.h> #include <linux/tty.h> /* for linux/serial_core.h */ #include <linux/serial_core.h> +#include <linux/serial_8250.h> #include <asm/system.h> #include <asm/pgtable.h> @@ -99,6 +100,7 @@ #include <asm/mpc10x.h> #include <asm/pci-bridge.h> #include <asm/kgdb.h> +#include <asm/ppc_sys.h> #include "sandpoint.h" @@ -305,6 +307,24 @@ sandpoint_setup_arch(void) /* Lookup PCI host bridges */ sandpoint_find_bridges(); + if (strncmp (cur_ppc_sys_spec->ppc_sys_name, "8245", 4) == 0) + { + bd_t *bp = (bd_t *)__res; + struct plat_serial8250_port *pdata; + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_DUART); + + if (pdata) + { + pdata[0].uartclk = bp->bi_busfreq; + pdata[0].membase = ioremap(pdata[0].mapbase, 0x100); + + /* this disables the 2nd serial port on the DUART + * since the sandpoint does not have it connected */ + pdata[1].uartclk = 0; + pdata[1].irq = 0; + pdata[1].mapbase = 0; + } + printk(KERN_INFO "Motorola SPS Sandpoint Test Platform\n"); printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n"); diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dd418ea3426..dec5bf4f687 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -81,7 +81,7 @@ obj-$(CONFIG_SBC82xx) += todc_time.o obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \ todc_time.o obj-$(CONFIG_8260) += m8260_setup.o -obj-$(CONFIG_PCI_8260) += m8260_pci.o indirect_pci.o +obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o ifeq ($(CONFIG_PPC_GEN550),y) @@ -92,12 +92,12 @@ ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y) obj-$(CONFIG_SERIAL_TEXT_DEBUG) += mv64x60_dbg.o endif obj-$(CONFIG_BOOTX_TEXT) += btext.o -obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o +obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o ppc_sys.o obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ - ppc_sys.o mpc85xx_sys.o \ + ppc_sys.o i8259.o mpc85xx_sys.o \ mpc85xx_devices.o ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o @@ -107,6 +107,7 @@ obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \ ifeq ($(CONFIG_83xx),y) obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o endif +obj-$(CONFIG_MPC8548_CDS) += todc_time.o obj-$(CONFIG_MPC8555_CDS) += todc_time.o obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_setup.o mpc52xx_pic.o \ mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c deleted file mode 100644 index 057cc3f8ff3..00000000000 --- a/arch/ppc/syslib/m8260_pci.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 Red Hat, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/delay.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/immap_cpm2.h> -#include <asm/mpc8260.h> - -#include "m8260_pci.h" - - -/* PCI bus configuration registers. - */ - -static void __init m8260_setup_pci(struct pci_controller *hose) -{ - volatile cpm2_map_t *immap = cpm2_immr; - unsigned long pocmr; - u16 tempShort; - -#ifndef CONFIG_ATC /* already done in U-Boot */ - /* - * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), - * and local bus for PCI (SIUMCR [LBPC]). - */ - immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000; -#endif - - /* Make PCI lowest priority */ - /* Each 4 bits is a device bus request and the MS 4bits - is highest priority */ - /* Bus 4bit value - --- ---------- - CPM high 0b0000 - CPM middle 0b0001 - CPM low 0b0010 - PCI reguest 0b0011 - Reserved 0b0100 - Reserved 0b0101 - Internal Core 0b0110 - External Master 1 0b0111 - External Master 2 0b1000 - External Master 3 0b1001 - The rest are reserved */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; - - /* Park bus on core while modifying PCI Bus accesses */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6; - - /* - * Set up master window that allows the CPU to access PCI space. This - * window is set up using the first SIU PCIBR registers. - */ - immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK; - immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE; - - /* Disable machine check on no response or target abort */ - immap->im_pci.pci_emr = cpu_to_le32(0x1fe7); - /* Release PCI RST (by default the PCI RST signal is held low) */ - immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); - - /* give it some time */ - mdelay(1); - - /* - * Set up master window that allows the CPU to access PCI Memory (prefetch) - * space. This window is set up using the first set of Outbound ATU registers. - */ - immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12); - immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN); - - /* - * Set up master window that allows the CPU to access PCI Memory (non-prefetch) - * space. This window is set up using the second set of Outbound ATU registers. - */ - immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12); - immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12); - pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE); - - /* - * Set up master window that allows the CPU to access PCI IO space. This window - * is set up using the third set of Outbound ATU registers. - */ - immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12); - immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12); - pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff; - immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO); - - /* - * Set up slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - - immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12); - immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12); - pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff; - immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN); - - /* See above for description - puts PCI request as highest priority */ - immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; - - /* Park the bus on the PCI */ - immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; - - /* Host mode - specify the bridge as a host-PCI bridge */ - early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST); - - /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */ - early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort); - early_write_config_word(hose, 0, 0, PCI_COMMAND, - tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -} - -void __init m8260_find_bridges(void) -{ - extern int pci_assign_all_busses; - struct pci_controller * hose; - - pci_assign_all_busses = 1; - - hose = pcibios_alloc_controller(); - - if (!hose) - return; - - ppc_md.pci_swizzle = common_swizzle; - - hose->first_busno = 0; - hose->bus_offset = 0; - hose->last_busno = 0xff; - - setup_m8260_indirect_pci(hose, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, - (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); - - m8260_setup_pci(hose); - hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET; - - hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE, - MPC826x_PCI_IO_SIZE); - isa_io_base = (unsigned long) hose->io_base_virt; - - /* setup resources */ - pci_init_resource(&hose->mem_resources[0], - MPC826x_PCI_LOWER_MEM, - MPC826x_PCI_UPPER_MEM, - IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); - - pci_init_resource(&hose->mem_resources[1], - MPC826x_PCI_LOWER_MMIO, - MPC826x_PCI_UPPER_MMIO, - IORESOURCE_MEM, "PCI memory"); - - pci_init_resource(&hose->io_resource, - MPC826x_PCI_LOWER_IO, - MPC826x_PCI_UPPER_IO, - IORESOURCE_IO, "PCI I/O"); -} diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h deleted file mode 100644 index d1352120acd..00000000000 --- a/arch/ppc/syslib/m8260_pci.h +++ /dev/null @@ -1,76 +0,0 @@ - -#ifndef _PPC_KERNEL_M8260_PCI_H -#define _PPC_KERNEL_M8260_PCI_H - -#include <asm/m8260_pci.h> - -/* - * Local->PCI map (from CPU) controlled by - * MPC826x master window - * - * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0 - * - * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) - * 0xA0000000 - 0xAFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) - * 0xB0000000 - 0xB0FFFFFF 32-bit PCI IO (Outbound ATU #3) - * - * PCI->Local map (from PCI) - * MPC826x slave window controlled by - * - * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) - */ - -/* - * Slave window that allows PCI masters to access MPC826x local memory. - * This window is set up using the first set of Inbound ATU registers - */ - -#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL -#define MPC826x_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) -#define MPC826x_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) -#endif - -/* - * This is the window that allows the CPU to access PCI address space. - * It will be setup with the SIU PCIBR0 register. All three PCI master - * windows, which allow the CPU to access PCI prefetch, non prefetch, - * and IO space (see below), must all fit within this window. - */ -#ifndef MPC826x_PCI_BASE -#define MPC826x_PCI_BASE 0x80000000 -#define MPC826x_PCI_MASK 0xc0000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MEM -#define MPC826x_PCI_LOWER_MEM 0x80000000 -#define MPC826x_PCI_UPPER_MEM 0x9fffffff -#define MPC826x_PCI_MEM_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_MMIO -#define MPC826x_PCI_LOWER_MMIO 0xa0000000 -#define MPC826x_PCI_UPPER_MMIO 0xafffffff -#define MPC826x_PCI_MMIO_OFFSET 0x00000000 -#endif - -#ifndef MPC826x_PCI_LOWER_IO -#define MPC826x_PCI_LOWER_IO 0x00000000 -#define MPC826x_PCI_UPPER_IO 0x00ffffff -#define MPC826x_PCI_IO_BASE 0xb0000000 -#define MPC826x_PCI_IO_SIZE 0x01000000 -#endif - -#ifndef _IO_BASE -#define _IO_BASE isa_io_base -#endif - -#ifdef CONFIG_8260_PCI9 -struct pci_controller; -extern void setup_m8260_indirect_pci(struct pci_controller* hose, - u32 cfg_addr, u32 cfg_data); -#else -#define setup_m8260_indirect_pci setup_indirect_pci -#endif - -#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c index 9c0582d639e..1dc7e4e1d49 100644 --- a/arch/ppc/syslib/m8260_pci_erratum9.c +++ b/arch/ppc/syslib/m8260_pci_erratum9.c @@ -31,7 +31,7 @@ #include <asm/immap_cpm2.h> #include <asm/cpm2.h> -#include "m8260_pci.h" +#include "m82xx_pci.h" #ifdef CONFIG_8260_PCI9 /*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */ @@ -248,11 +248,11 @@ EXPORT_SYMBOL(idma_pci9_read_le); static inline int is_pci_mem(unsigned long addr) { - if (addr >= MPC826x_PCI_LOWER_MMIO && - addr <= MPC826x_PCI_UPPER_MMIO) + if (addr >= M82xx_PCI_LOWER_MMIO && + addr <= M82xx_PCI_UPPER_MMIO) return 1; - if (addr >= MPC826x_PCI_LOWER_MEM && - addr <= MPC826x_PCI_UPPER_MEM) + if (addr >= M82xx_PCI_LOWER_MEM && + addr <= M82xx_PCI_UPPER_MEM) return 1; return 0; } diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 23ea3f694de..fda75d79050 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -34,7 +34,8 @@ unsigned char __res[sizeof(bd_t)]; extern void cpm2_reset(void); -extern void m8260_find_bridges(void); +extern void pq2_find_bridges(void); +extern void pq2pci_init_irq(void); extern void idma_pci9_init(void); /* Place-holder for board-specific init */ @@ -56,7 +57,7 @@ m8260_setup_arch(void) idma_pci9_init(); #endif #ifdef CONFIG_PCI_8260 - m8260_find_bridges(); + pq2_find_bridges(); #endif #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -173,6 +174,12 @@ m8260_init_IRQ(void) * in case the boot rom changed something on us. */ cpm2_immr->im_intctl.ic_siprr = 0x05309770; + +#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS)) + /* Initialize stuff for the 82xx CPLD IC and install demux */ + pq2pci_init_irq(); +#endif + } /* diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c new file mode 100644 index 00000000000..5e7a7edcea7 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.c @@ -0,0 +1,383 @@ +/* + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 Red Hat, Inc. + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/immap_cpm2.h> +#include <asm/mpc8260.h> +#include <asm/cpm2.h> + +#include "m82xx_pci.h" + +/* + * Interrupt routing + */ + +static inline int +pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */ + { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */ + { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */ + }; + + const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void +pq2pci_mask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_unmask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +static void +pq2pci_mask_and_ack(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_end_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +struct hw_interrupt_type pq2pci_ic = { + "PQ2 PCI", + NULL, + NULL, + pq2pci_unmask_irq, + pq2pci_mask_irq, + pq2pci_mask_and_ack, + pq2pci_end_irq, + 0 +}; + +static irqreturn_t +pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long stat, mask, pend; + int bit; + + for(;;) { + stat = *(volatile unsigned long *) PCI_INT_STAT_REG; + mask = *(volatile unsigned long *) PCI_INT_MASK_REG; + pend = stat & ~mask & 0xf0000000; + if (!pend) + break; + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + __do_IRQ(NR_CPM_INTS + bit, regs); + } + } + + return IRQ_HANDLED; +} + +static struct irqaction pq2pci_irqaction = { + .handler = pq2pci_irq_demux, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "PQ2 PCI cascade", +}; + + +void +pq2pci_init_irq(void) +{ + int irq; + volatile cpm2_map_t *immap = cpm2_immr; +#if defined CONFIG_ADS8272 + /* configure chip select for PCI interrupt controller */ + immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or3 = 0xffff8010; +#elif defined CONFIG_PQ2FADS + immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or8 = 0xffff8010; +#endif + for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) + irq_desc[irq].handler = &pq2pci_ic; + + /* make PCI IRQ level sensitive */ + immap->im_intctl.ic_siexr &= + ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1))); + + /* mask all PCI interrupts */ + *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000; + + /* install the demultiplexer for the PCI cascade interrupt */ + setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction); + return; +} + +static int +pq2pci_exclude_device(u_char bus, u_char devfn) +{ + return PCIBIOS_SUCCESSFUL; +} + +/* PCI bus configuration registers. + */ +static void +pq2ads_setup_pci(struct pci_controller *hose) +{ + __u32 val; + volatile cpm2_map_t *immap = cpm2_immr; + bd_t* binfo = (bd_t*) __res; + u32 sccr = immap->im_clkrst.car_sccr; + uint pci_div,freq,time; + /* PCI int lowest prio */ + /* Each 4 bits is a device bus request and the MS 4bits + is highest priority */ + /* Bus 4bit value + --- ---------- + CPM high 0b0000 + CPM middle 0b0001 + CPM low 0b0010 + PCI reguest 0b0011 + Reserved 0b0100 + Reserved 0b0101 + Internal Core 0b0110 + External Master 1 0b0111 + External Master 2 0b1000 + External Master 3 0b1001 + The rest are reserved + */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; + /* park bus on core */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE; + /* + * Set up master windows that allow the CPU to access PCI space. These + * windows are set up using the two SIU PCIBR registers. + */ + + immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE; + immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE; + +#ifdef M82xx_PCI_SEC_WND_SIZE + immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE; + immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; +#endif + +#if defined CONFIG_ADS8272 + immap->im_siu_conf.siu_82xx.sc_siumcr = + (immap->im_siu_conf.siu_82xx.sc_siumcr & + ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE | + SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 | + SIUMCR_LBPC11 | SIUMCR_APPC11 | + SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) | + SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 | + SIUMCR_APPC10 | SIUMCR_CS10PC00 | + SIUMCR_BCTLC00 | SIUMCR_MMR11 ; + +#elif defined CONFIG_PQ2FADS + /* + * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), + * and local bus for PCI (SIUMCR [LBPC]). + */ + immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | + SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10; +#endif + /* Enable PCI */ + immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); + + pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) * + ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1); + freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div)); + time = (int)666666/freq; + /* due to PCI Local Bus spec, some devices needs to wait such a long + time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */ + printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq, + (time==1) ? "0.5 seconds":"1 second" ); + + { + int i; + for(i=0;i<(500*time);i++) + udelay(1000); + } + + /* setup ATU registers */ + immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO | + ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT); + + /* Set-up non-prefetchable window */ + immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT); + + /* Set-up prefetchable window */ + immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN | + (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT); + + /* Inbound transactions from PCI memory space */ + immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN | + ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT)); + immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); + immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); + +#if defined CONFIG_ADS8272 + /* PCI int highest prio */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745; +#elif defined CONFIG_PQ2FADS + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; +#endif + /* park bus on PCI */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; + + /* Enable bus mastering and inbound memory transactions */ + early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val); + val &= 0xffff0000; + val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER; + early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val); + +} + +void __init pq2_find_bridges(void) +{ + extern int pci_assign_all_busses; + struct pci_controller * hose; + int host_bridge; + + pci_assign_all_busses = 1; + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + ppc_md.pci_swizzle = common_swizzle; + + hose->first_busno = 0; + hose->bus_offset = 0; + hose->last_busno = 0xff; + +#ifdef CONFIG_ADS8272 + hose->set_cfg_type = 1; +#endif + + setup_m8260_indirect_pci(hose, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); + + /* Make sure it is a supported bridge */ + early_read_config_dword(hose, + 0, + PCI_DEVFN(0,0), + PCI_VENDOR_ID, + &host_bridge); + switch (host_bridge) { + case PCI_DEVICE_ID_MPC8265: + break; + case PCI_DEVICE_ID_MPC8272: + break; + default: + printk("Attempting to use unrecognized host bridge ID" + " 0x%08x.\n", host_bridge); + break; + } + + pq2ads_setup_pci(hose); + + hose->io_space.start = M82xx_PCI_LOWER_IO; + hose->io_space.end = M82xx_PCI_UPPER_IO; + hose->mem_space.start = M82xx_PCI_LOWER_MEM; + hose->mem_space.end = M82xx_PCI_UPPER_MMIO; + hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET; + + isa_io_base = + (unsigned long) ioremap(M82xx_PCI_IO_BASE, + M82xx_PCI_IO_SIZE); + hose->io_base_virt = (void *) isa_io_base; + + /* setup resources */ + pci_init_resource(&hose->mem_resources[0], + M82xx_PCI_LOWER_MEM, + M82xx_PCI_UPPER_MEM, + IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); + + pci_init_resource(&hose->mem_resources[1], + M82xx_PCI_LOWER_MMIO, + M82xx_PCI_UPPER_MMIO, + IORESOURCE_MEM, "PCI memory"); + + pci_init_resource(&hose->io_resource, + M82xx_PCI_LOWER_IO, + M82xx_PCI_UPPER_IO, + IORESOURCE_IO | 1, "PCI I/O"); + + ppc_md.pci_exclude_device = pq2pci_exclude_device; + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_map_irq = pq2pci_map_irq; + ppc_md.pcibios_fixup = NULL; + ppc_md.pcibios_fixup_bus = NULL; + +} diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h new file mode 100644 index 00000000000..924f73f8e59 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.h @@ -0,0 +1,92 @@ + +#ifndef _PPC_KERNEL_M82XX_PCI_H +#define _PPC_KERNEL_M82XX_PCI_H + +#include <asm/m8260_pci.h> +/* + * Local->PCI map (from CPU) controlled by + * MPC826x master window + * + * 0xF6000000 - 0xF7FFFFFF IO space + * 0x80000000 - 0xBFFFFFFF CPU2PCI memory space PCIBR0 + * + * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1) + * 0xA0000000 - 0xBFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) + * 0xF6000000 - 0xF7FFFFFF 32-bit PCI IO (Outbound ATU #3) + * + * PCI->Local map (from PCI) + * MPC826x slave window controlled by + * + * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) + */ + +/* + * Slave window that allows PCI masters to access MPC826x local memory. + * This window is set up using the first set of Inbound ATU registers + */ + +#ifndef M82xx_PCI_SLAVE_MEM_LOCAL +#define M82xx_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart) +#define M82xx_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize) +#endif + +/* + * This is the window that allows the CPU to access PCI address space. + * It will be setup with the SIU PCIBR0 register. All three PCI master + * windows, which allow the CPU to access PCI prefetch, non prefetch, + * and IO space (see below), must all fit within this window. + */ + +#ifndef M82xx_PCI_LOWER_MEM +#define M82xx_PCI_LOWER_MEM 0x80000000 +#define M82xx_PCI_UPPER_MEM 0x9fffffff +#define M82xx_PCI_MEM_OFFSET 0x00000000 +#define M82xx_PCI_MEM_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_MMIO +#define M82xx_PCI_LOWER_MMIO 0xa0000000 +#define M82xx_PCI_UPPER_MMIO 0xafffffff +#define M82xx_PCI_MMIO_OFFSET 0x00000000 +#define M82xx_PCI_MMIO_SIZE 0x20000000 +#endif + +#ifndef M82xx_PCI_LOWER_IO +#define M82xx_PCI_LOWER_IO 0x00000000 +#define M82xx_PCI_UPPER_IO 0x01ffffff +#define M82xx_PCI_IO_BASE 0xf6000000 +#define M82xx_PCI_IO_SIZE 0x02000000 +#endif + +#ifndef M82xx_PCI_PRIM_WND_SIZE +#define M82xx_PCI_PRIM_WND_SIZE ~(M82xx_PCI_IO_SIZE - 1U) +#define M82xx_PCI_PRIM_WND_BASE (M82xx_PCI_IO_BASE) +#endif + +#ifndef M82xx_PCI_SEC_WND_SIZE +#define M82xx_PCI_SEC_WND_SIZE ~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U) +#define M82xx_PCI_SEC_WND_BASE (M82xx_PCI_LOWER_MEM) +#endif + +#ifndef POTA_ADDR_SHIFT +#define POTA_ADDR_SHIFT 12 +#endif + +#ifndef PITA_ADDR_SHIFT +#define PITA_ADDR_SHIFT 12 +#endif + +#ifndef _IO_BASE +#define _IO_BASE isa_io_base +#endif + +#ifdef CONFIG_8260_PCI9 +struct pci_controller; +extern void setup_m8260_indirect_pci(struct pci_controller* hose, + u32 cfg_addr, u32 cfg_data); +#else +#define setup_m8260_indirect_pci setup_indirect_pci +#endif + +#endif /* _PPC_KERNEL_M8260_PCI_H */ diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index fd93adfd464..8fc5f415452 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -21,6 +21,9 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/slab.h> +#include <linux/serial_8250.h> +#include <linux/fsl_devices.h> +#include <linux/device.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -30,16 +33,7 @@ #include <asm/pci-bridge.h> #include <asm/open_pic.h> #include <asm/mpc10x.h> -#include <asm/ocp.h> - -/* The OCP structure is fixed by code below, before OCP initialises. - paddr depends on where the board places the EUMB. - - fixed in mpc10x_bridge_init(). - irq depends on two things: - > does the board use the EPIC at all? (PCORE does not). - > is the EPIC in serial or parallel mode? - - fixed in mpc10x_set_openpic(). -*/ +#include <asm/ppc_sys.h> #ifdef CONFIG_MPC10X_OPENPIC #ifdef CONFIG_EPIC_SERIAL_MODE @@ -50,35 +44,140 @@ #define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS) #define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS) #define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS) +#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS) #else -#define MPC10X_I2C_IRQ OCP_IRQ_NA -#define MPC10X_DMA0_IRQ OCP_IRQ_NA -#define MPC10X_DMA1_IRQ OCP_IRQ_NA +#define MPC10X_I2C_IRQ -1 +#define MPC10X_DMA0_IRQ -1 +#define MPC10X_DMA1_IRQ -1 +#define MPC10X_UART0_IRQ -1 #endif - -struct ocp_def core_ocp[] = { - { .vendor = OCP_VENDOR_INVALID - } +static struct fsl_i2c_platform_data mpc10x_i2c_pdata = { + .device_flags = 0, }; -static struct ocp_fs_i2c_data mpc10x_i2c_data = { - .flags = 0 +static struct plat_serial8250_port serial_platform_data[] = { + [0] = { + .mapbase = 0x4500, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + }, + [1] = { + .mapbase = 0x4600, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + }, + { }, }; -static struct ocp_def mpc10x_i2c_ocp = { - .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_IIC, - .index = 0, - .additions = &mpc10x_i2c_data + +struct platform_device ppc_sys_platform_devices[] = { + [MPC10X_IIC1] = { + .name = "fsl-i2c", + .id = 1, + .dev.platform_data = &mpc10x_i2c_pdata, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_I2C_OFFSET, + .end = MPC10X_EUMB_I2C_OFFSET + + MPC10X_EUMB_I2C_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ + }, + }, + }, + [MPC10X_DMA0] = { + .name = "fsl-dma", + .id = 0, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x10, + .end = MPC10X_EUMB_DMA_OFFSET + 0x1f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DMA1] = { + .name = "fsl-dma", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x20, + .end = MPC10X_EUMB_DMA_OFFSET + 0x2f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DMA1] = { + .name = "fsl-dma", + .id = 1, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = MPC10X_EUMB_DMA_OFFSET + 0x20, + .end = MPC10X_EUMB_DMA_OFFSET + 0x2f, + .flags = IORESOURCE_MEM, + }, + { + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC10X_DUART] = { + .name = "serial8250", + .id = 0, + .dev.platform_data = serial_platform_data, + }, }; -static struct ocp_def mpc10x_dma_ocp[2] = { -{ .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_DMA, - .index = 0 }, -{ .vendor = OCP_VENDOR_MOTOROLA, - .function = OCP_FUNC_DMA, - .index = 1 } +/* We use the PCI ID to match on */ +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + { + .ppc_sys_name = "8245", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_8245, + .num_devices = 4, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_DUART, + }, + }, + { + .ppc_sys_name = "8240", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_8240, + .num_devices = 3, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, + }, + }, + { + .ppc_sys_name = "107", + .mask = 0xFFFFFFFF, + .value = MPC10X_BRIDGE_107, + .num_devices = 3, + .device_list = (enum ppc_sys_devices[]) + { + MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, + }, + }, + { /* default match */ + .ppc_sys_name = "", + .mask = 0x00000000, + .value = 0x00000000, + }, }; /* Set resources to match bridge memory map */ @@ -132,7 +231,7 @@ mpc10x_bridge_init(struct pci_controller *hose, uint new_map, uint phys_eumb_base) { - int host_bridge, picr1, picr1_bit; + int host_bridge, picr1, picr1_bit, i; ulong pci_config_addr, pci_config_data; u_char pir, byte; @@ -273,7 +372,7 @@ mpc10x_bridge_init(struct pci_controller *hose, printk("Host bridge in Agent mode\n"); /* Read or Set LMBAR & PCSRBAR? */ } - + /* Set base addr of the 8240/107 EUMB. */ early_write_config_dword(hose, 0, @@ -287,17 +386,6 @@ mpc10x_bridge_init(struct pci_controller *hose, ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET, MPC10X_EUMB_EPIC_SIZE); #endif - mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET; - mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ; - ocp_add_one_device(&mpc10x_i2c_ocp); - mpc10x_dma_ocp[0].paddr = phys_eumb_base + - MPC10X_EUMB_DMA_OFFSET + 0x100; - mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ; - ocp_add_one_device(&mpc10x_dma_ocp[0]); - mpc10x_dma_ocp[1].paddr = phys_eumb_base + - MPC10X_EUMB_DMA_OFFSET + 0x200; - mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ; - ocp_add_one_device(&mpc10x_dma_ocp[1]); } #ifdef CONFIG_MPC10X_STORE_GATHERING @@ -306,6 +394,29 @@ mpc10x_bridge_init(struct pci_controller *hose, mpc10x_disable_store_gathering(hose); #endif + /* setup platform devices for MPC10x bridges */ + identify_ppc_sys_by_id (host_bridge); + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + unsigned int dev_id = cur_ppc_sys_spec->device_list[i]; + ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id], + phys_eumb_base); + } + + /* IRQ's are determined at runtime */ + ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ; + ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ; + ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ; + ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ; + ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ; + ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ; + + serial_platform_data[0].mapbase += phys_eumb_base; + serial_platform_data[0].irq = MPC10X_UART0_IRQ; + + serial_platform_data[1].mapbase += phys_eumb_base; + serial_platform_data[1].irq = MPC10X_UART0_IRQ + 1; + /* * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative * PCI reads may return stale data so turn off. @@ -330,7 +441,7 @@ mpc10x_bridge_init(struct pci_controller *hose, * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd. */ if (host_bridge == MPC10X_BRIDGE_8245) { - ulong picr2; + u32 picr2; early_read_config_dword(hose, 0, PCI_DEVFN(0,0), MPC10X_CFG_PICR2_REG, &picr2); @@ -504,6 +615,8 @@ void __init mpc10x_set_openpic(void) openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020); /* Skip reserved space and map Message Unit Interrupt (I2O) */ openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0); + /* Skip reserved space and map Serial Interupts */ + openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120); openpic_init(NUM_8259_INTERRUPTS); } diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 1e658ef57e7..8af322dd476 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -40,6 +40,42 @@ static struct gianfar_platform_data mpc85xx_tsec2_pdata = { .phy_reg_addr = MPC85xx_ENET1_OFFSET, }; +static struct gianfar_platform_data mpc85xx_etsec1_pdata = { + .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, + .phy_reg_addr = MPC85xx_ENET1_OFFSET, +}; + +static struct gianfar_platform_data mpc85xx_etsec2_pdata = { + .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, + .phy_reg_addr = MPC85xx_ENET1_OFFSET, +}; + +static struct gianfar_platform_data mpc85xx_etsec3_pdata = { + .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, + .phy_reg_addr = MPC85xx_ENET1_OFFSET, +}; + +static struct gianfar_platform_data mpc85xx_etsec4_pdata = { + .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | + FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | + FSL_GIANFAR_DEV_HAS_MULTI_INTR | + FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | + FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, + .phy_reg_addr = MPC85xx_ENET1_OFFSET, +}; + static struct gianfar_platform_data mpc85xx_fec_pdata = { .phy_reg_addr = MPC85xx_ENET1_OFFSET, }; @@ -48,6 +84,10 @@ static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = { .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, }; +static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = { + .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, +}; + static struct plat_serial8250_port serial_platform_data[] = { [0] = { .mapbase = 0x4500, @@ -281,7 +321,6 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, -#ifdef CONFIG_CPM2 [MPC85xx_CPM_FCC1] = { .name = "fsl-cpm-fcc", .id = 1, @@ -535,7 +574,151 @@ struct platform_device ppc_sys_platform_devices[] = { }, }, }, -#endif /* CONFIG_CPM2 */ + [MPC85xx_eTSEC1] = { + .name = "fsl-gianfar", + .id = 1, + .dev.platform_data = &mpc85xx_etsec1_pdata, + .num_resources = 4, + .resource = (struct resource[]) { + { + .start = MPC85xx_ENET1_OFFSET, + .end = MPC85xx_ENET1_OFFSET + + MPC85xx_ENET1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "tx", + .start = MPC85xx_IRQ_TSEC1_TX, + .end = MPC85xx_IRQ_TSEC1_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = MPC85xx_IRQ_TSEC1_RX, + .end = MPC85xx_IRQ_TSEC1_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "error", + .start = MPC85xx_IRQ_TSEC1_ERROR, + .end = MPC85xx_IRQ_TSEC1_ERROR, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC85xx_eTSEC2] = { + .name = "fsl-gianfar", + .id = 2, + .dev.platform_data = &mpc85xx_etsec2_pdata, + .num_resources = 4, + .resource = (struct resource[]) { + { + .start = MPC85xx_ENET2_OFFSET, + .end = MPC85xx_ENET2_OFFSET + + MPC85xx_ENET2_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "tx", + .start = MPC85xx_IRQ_TSEC2_TX, + .end = MPC85xx_IRQ_TSEC2_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = MPC85xx_IRQ_TSEC2_RX, + .end = MPC85xx_IRQ_TSEC2_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "error", + .start = MPC85xx_IRQ_TSEC2_ERROR, + .end = MPC85xx_IRQ_TSEC2_ERROR, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC85xx_eTSEC3] = { + .name = "fsl-gianfar", + .id = 3, + .dev.platform_data = &mpc85xx_etsec3_pdata, + .num_resources = 4, + .resource = (struct resource[]) { + { + .start = MPC85xx_ENET3_OFFSET, + .end = MPC85xx_ENET3_OFFSET + + MPC85xx_ENET3_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "tx", + .start = MPC85xx_IRQ_TSEC3_TX, + .end = MPC85xx_IRQ_TSEC3_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = MPC85xx_IRQ_TSEC3_RX, + .end = MPC85xx_IRQ_TSEC3_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "error", + .start = MPC85xx_IRQ_TSEC3_ERROR, + .end = MPC85xx_IRQ_TSEC3_ERROR, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC85xx_eTSEC4] = { + .name = "fsl-gianfar", + .id = 4, + .dev.platform_data = &mpc85xx_etsec4_pdata, + .num_resources = 4, + .resource = (struct resource[]) { + { + .start = 0x27000, + .end = 0x27fff, + .flags = IORESOURCE_MEM, + }, + { + .name = "tx", + .start = MPC85xx_IRQ_TSEC4_TX, + .end = MPC85xx_IRQ_TSEC4_TX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "rx", + .start = MPC85xx_IRQ_TSEC4_RX, + .end = MPC85xx_IRQ_TSEC4_RX, + .flags = IORESOURCE_IRQ, + }, + { + .name = "error", + .start = MPC85xx_IRQ_TSEC4_ERROR, + .end = MPC85xx_IRQ_TSEC4_ERROR, + .flags = IORESOURCE_IRQ, + }, + }, + }, + [MPC85xx_IIC2] = { + .name = "fsl-i2c", + .id = 2, + .dev.platform_data = &mpc85xx_fsl_i2c2_pdata, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = 0x03100, + .end = 0x031ff, + .flags = IORESOURCE_MEM, + }, + { + .start = MPC85xx_IRQ_IIC1, + .end = MPC85xx_IRQ_IIC1, + .flags = IORESOURCE_IRQ, + }, + }, + }, }; static int __init mach_mpc85xx_fixup(struct platform_device *pdev) diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c index d806a92a940..6e3184ab354 100644 --- a/arch/ppc/syslib/mpc85xx_sys.c +++ b/arch/ppc/syslib/mpc85xx_sys.c @@ -110,6 +110,111 @@ struct ppc_sys_spec ppc_sys_specs[] = { MPC85xx_CPM_USB, }, }, + /* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */ + { + .ppc_sys_name = "8548E", + .mask = 0xFFFF00F0, + .value = 0x80390010, + .num_devices = 13, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, + MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, + }, + }, + { + .ppc_sys_name = "8548", + .mask = 0xFFFF00F0, + .value = 0x80310010, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, + MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, + }, + }, + { + .ppc_sys_name = "8547E", + .mask = 0xFFFF00F0, + .value = 0x80390010, + .num_devices = 13, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, + MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, + }, + }, + { + .ppc_sys_name = "8547", + .mask = 0xFFFF00F0, + .value = 0x80310010, + .num_devices = 12, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, + MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, + }, + }, + { + .ppc_sys_name = "8545E", + .mask = 0xFFFF00F0, + .value = 0x80390010, + .num_devices = 11, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, + MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, + }, + }, + { + .ppc_sys_name = "8545", + .mask = 0xFFFF00F0, + .value = 0x80310010, + .num_devices = 10, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, + MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, + }, + }, + { + .ppc_sys_name = "8543E", + .mask = 0xFFFF00F0, + .value = 0x803A0010, + .num_devices = 11, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, + MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, + }, + }, + { + .ppc_sys_name = "8543", + .mask = 0xFFFF00F0, + .value = 0x80320010, + .num_devices = 10, + .device_list = (enum ppc_sys_devices[]) + { + MPC85xx_eTSEC1, MPC85xx_eTSEC2, + MPC85xx_IIC1, MPC85xx_IIC2, + MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, + MPC85xx_PERFMON, MPC85xx_DUART, + }, + }, { /* default match */ .ppc_sys_name = "", .mask = 0x00000000, diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index a5156c5179a..e5fd2ae503e 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -68,7 +68,7 @@ static int ocp_inited; /* Sysfs support */ #define OCP_DEF_ATTR(field, format_string) \ static ssize_t \ -show_##field(struct device *dev, char *buf) \ +show_##field(struct device *dev, struct device_attribute *attr, char *buf) \ { \ struct ocp_device *odev = to_ocp_dev(dev); \ \ diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c index 46269ed21ae..49c0e34e2d6 100644 --- a/arch/ppc/syslib/of_device.c +++ b/arch/ppc/syslib/of_device.c @@ -161,7 +161,7 @@ void of_unregister_driver(struct of_platform_driver *drv) } -static ssize_t dev_show_devspec(struct device *dev, char *buf) +static ssize_t dev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) { struct of_device *ofdev; diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 9d4ed68b580..b45d8268bf9 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -21,7 +21,6 @@ #include <asm/signal.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/prom.h> #include <asm/sections.h> #include <asm/open_pic.h> #include <asm/i8259.h> @@ -275,7 +274,7 @@ static void __init openpic_enable_sie(void) } #endif -#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM) +#if defined(CONFIG_EPIC_SERIAL_MODE) static void openpic_reset(void) { openpic_setfield(&OpenPIC->Global.Global_Configuration0, @@ -993,8 +992,6 @@ int openpic_resume(struct sys_device *sysdev) return 0; } - openpic_reset(); - /* OpenPIC sometimes seem to need some time to be fully back up... */ do { openpic_set_spurious(OPENPIC_VEC_SPURIOUS); diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c index ea26da0d8b6..7e272c51a49 100644 --- a/arch/ppc/syslib/open_pic2.c +++ b/arch/ppc/syslib/open_pic2.c @@ -25,7 +25,6 @@ #include <asm/signal.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/prom.h> #include <asm/sections.h> #include <asm/open_pic.h> #include <asm/i8259.h> diff --git a/arch/ppc/syslib/ppc4xx_kgdb.c b/arch/ppc/syslib/ppc4xx_kgdb.c deleted file mode 100644 index fe8668bf813..00000000000 --- a/arch/ppc/syslib/ppc4xx_kgdb.c +++ /dev/null @@ -1,124 +0,0 @@ -#include <linux/config.h> -#include <linux/types.h> -#include <asm/ibm4xx.h> -#include <linux/kernel.h> - - - -#define LSR_DR 0x01 /* Data ready */ -#define LSR_OE 0x02 /* Overrun */ -#define LSR_PE 0x04 /* Parity error */ -#define LSR_FE 0x08 /* Framing error */ -#define LSR_BI 0x10 /* Break */ -#define LSR_THRE 0x20 /* Xmit holding register empty */ -#define LSR_TEMT 0x40 /* Xmitter empty */ -#define LSR_ERR 0x80 /* Error */ - -#include <platforms/4xx/ibm_ocp.h> - -extern struct NS16550* COM_PORTS[]; -#ifndef NULL -#define NULL 0x00 -#endif - -static volatile struct NS16550 *kgdb_debugport = NULL; - -volatile struct NS16550 * -NS16550_init(int chan) -{ - volatile struct NS16550 *com_port; - int quot; -#ifdef BASE_BAUD - quot = BASE_BAUD / 9600; -#else - quot = 0x000c; /* 0xc = 9600 baud (on a pc) */ -#endif - - com_port = (struct NS16550 *) COM_PORTS[chan]; - - com_port->lcr = 0x00; - com_port->ier = 0xFF; - com_port->ier = 0x00; - com_port->lcr = com_port->lcr | 0x80; /* Access baud rate */ - com_port->dll = ( quot & 0x00ff ); /* 0xc = 9600 baud */ - com_port->dlm = ( quot & 0xff00 ) >> 8; - com_port->lcr = 0x03; /* 8 data, 1 stop, no parity */ - com_port->mcr = 0x00; /* RTS/DTR */ - com_port->fcr = 0x07; /* Clear & enable FIFOs */ - - return( com_port ); -} - - -void -NS16550_putc(volatile struct NS16550 *com_port, unsigned char c) -{ - while ((com_port->lsr & LSR_THRE) == 0) - ; - com_port->thr = c; - return; -} - -unsigned char -NS16550_getc(volatile struct NS16550 *com_port) -{ - while ((com_port->lsr & LSR_DR) == 0) - ; - return (com_port->rbr); -} - -unsigned char -NS16550_tstc(volatile struct NS16550 *com_port) -{ - return ((com_port->lsr & LSR_DR) != 0); -} - - -#if defined(CONFIG_KGDB_TTYS0) -#define KGDB_PORT 0 -#elif defined(CONFIG_KGDB_TTYS1) -#define KGDB_PORT 1 -#elif defined(CONFIG_KGDB_TTYS2) -#define KGDB_PORT 2 -#elif defined(CONFIG_KGDB_TTYS3) -#define KGDB_PORT 3 -#else -#error "invalid kgdb_tty port" -#endif - -void putDebugChar( unsigned char c ) -{ - if ( kgdb_debugport == NULL ) - kgdb_debugport = NS16550_init(KGDB_PORT); - NS16550_putc( kgdb_debugport, c ); -} - -int getDebugChar( void ) -{ - if (kgdb_debugport == NULL) - kgdb_debugport = NS16550_init(KGDB_PORT); - - return(NS16550_getc(kgdb_debugport)); -} - -void kgdb_interruptible(int enable) -{ - return; -} - -void putDebugString(char* str) -{ - while (*str != '\0') { - putDebugChar(*str); - str++; - } - putDebugChar('\r'); - return; -} - -void -kgdb_map_scc(void) -{ - printk("kgdb init \n"); - kgdb_debugport = NS16550_init(KGDB_PORT); -} diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index c28f9d67948..602a86891f7 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -23,12 +23,12 @@ #include <linux/serial_core.h> #include <linux/serial_8250.h> -#include <asm/prom.h> #include <asm/time.h> #include <asm/mpc83xx.h> #include <asm/mmu.h> #include <asm/ppc_sys.h> #include <asm/kgdb.h> +#include <asm/delay.h> #include <syslib/ppc83xx_setup.h> @@ -117,7 +117,34 @@ mpc83xx_early_serial_map(void) void mpc83xx_restart(char *cmd) { + volatile unsigned char __iomem *reg; + unsigned char tmp; + + reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); + local_irq_disable(); + + /* + * Unlock the BCSR bits so a PRST will update the contents. + * Otherwise the reset asserts but doesn't clear. + */ + tmp = in_8(reg + BCSR_MISC_REG3_OFF); + tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */ + out_8(reg + BCSR_MISC_REG3_OFF, tmp); + + /* + * Trigger a reset via a low->high transition of the + * PORESET bit. + */ + tmp = in_8(reg + BCSR_MISC_REG2_OFF); + tmp &= ~BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + + udelay(1); + + tmp |= BCSR_MISC_REG2_PORESET; + out_8(reg + BCSR_MISC_REG2_OFF, tmp); + for(;;); } diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index 152c3ef1312..ca95d79a704 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -23,7 +23,6 @@ #include <linux/serial_core.h> #include <linux/serial_8250.h> -#include <asm/prom.h> #include <asm/time.h> #include <asm/mpc85xx.h> #include <asm/immap_85xx.h> @@ -33,6 +32,8 @@ #include <syslib/ppc85xx_setup.h> +extern void abort(void); + /* Return the amount of memory */ unsigned long __init mpc85xx_find_end_of_memory(void) @@ -132,6 +133,12 @@ mpc85xx_halt(void) } #ifdef CONFIG_PCI + +#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) +extern void mpc85xx_cds_enable_via(struct pci_controller *hose); +extern void mpc85xx_cds_fixup_via(struct pci_controller *hose); +#endif + static void __init mpc85xx_setup_pci1(struct pci_controller *hose) { @@ -302,8 +309,18 @@ mpc85xx_setup_hose(void) ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) + /* Pre pciauto_bus_scan VIA init */ + mpc85xx_cds_enable_via(hose_a); +#endif + hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); +#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) + /* Post pciauto_bus_scan VIA fixup */ + mpc85xx_cds_fixup_via(hose_a); +#endif + #ifdef CONFIG_85xx_PCI2 hose_b = pcibios_alloc_controller(); diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c index 2cee87137f2..7f15136830f 100644 --- a/arch/ppc/syslib/prom_init.c +++ b/arch/ppc/syslib/prom_init.c @@ -626,8 +626,18 @@ inspect_node(phandle node, struct device_node *dad, l = call_prom("package-to-path", 3, 1, node, mem_start, mem_end - mem_start); if (l >= 0) { + char *p, *ep; + np->full_name = PTRUNRELOC((char *) mem_start); *(char *)(mem_start + l) = 0; + /* Fixup an Apple bug where they have bogus \0 chars in the + * middle of the path in some properties + */ + for (p = (char *)mem_start, ep = p + l; p < ep; p++) + if ((*p) == '\0') { + memmove(p, p+1, ep - p); + ep--; + } mem_start = ALIGNUL(mem_start + l + 1); } diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index 8565f49b8b0..be7869e3946 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -9,6 +9,7 @@ #include <linux/smp.h> #include <linux/interrupt.h> #include <linux/bitops.h> +#include <linux/kallsyms.h> #include <asm/ptrace.h> #include <asm/string.h> #include <asm/prom.h> @@ -93,8 +94,7 @@ static void take_input(char *); static unsigned read_spr(int); static void write_spr(int, unsigned); static void super_regs(void); -static void print_sysmap(void); -static void sysmap_lookup(void); +static void symbol_lookup(void); static void remove_bpts(void); static void insert_bpts(void); static struct bpt *at_breakpoint(unsigned pc); @@ -103,7 +103,6 @@ static void cacheflush(void); #ifdef CONFIG_SMP static void cpu_cmd(void); #endif /* CONFIG_SMP */ -static int pretty_print_addr(unsigned long addr); static void csum(void); #ifdef CONFIG_BOOTX_TEXT static void vidcmds(void); @@ -120,8 +119,6 @@ extern void longjmp(u_int *, int); extern void xmon_enter(void); extern void xmon_leave(void); -extern char* xmon_find_symbol(unsigned long addr, unsigned long* saddr); -extern unsigned long xmon_symbol_to_addr(char* symbol); static unsigned start_tb[NR_CPUS][2]; static unsigned stop_tb[NR_CPUS][2]; @@ -148,7 +145,6 @@ Commands:\n\ mm move a block of memory\n\ ms set a block of memory\n\ md compare two blocks of memory\n\ - M print System.map\n\ r print registers\n\ S print special registers\n\ t print backtrace\n\ @@ -175,6 +171,35 @@ extern inline void __delay(unsigned int loops) "r" (loops) : "ctr"); } +/* Print an address in numeric and symbolic form (if possible) */ +static void xmon_print_symbol(unsigned long address, const char *mid, + const char *after) +{ + char *modname; + const char *name = NULL; + unsigned long offset, size; + static char tmpstr[128]; + + printf("%.8lx", address); + if (setjmp(bus_error_jmp) == 0) { + debugger_fault_handler = handle_fault; + sync(); + name = kallsyms_lookup(address, &size, &offset, &modname, + tmpstr); + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + } + debugger_fault_handler = NULL; + + if (name) { + printf("%s%s+%#lx/%#lx", mid, name, offset, size); + if (modname) + printf(" [%s]", modname); + } + printf("%s", after); +} + static void get_tb(unsigned *p) { unsigned hi, lo, hiagain; @@ -454,7 +479,7 @@ cmds(struct pt_regs *excp) dump(); break; case 'l': - sysmap_lookup(); + symbol_lookup(); break; case 'r': if (excp != NULL) @@ -466,9 +491,6 @@ cmds(struct pt_regs *excp) else excprint(excp); break; - case 'M': - print_sysmap(); - break; case 'S': super_regs(); break; @@ -825,20 +847,19 @@ backtrace(struct pt_regs *excp) for (; sp != 0; sp = stack[0]) { if (mread(sp, stack, sizeof(stack)) != sizeof(stack)) break; - pretty_print_addr(stack[1]); - printf(" "); + printf("[%.8lx] ", stack); + xmon_print_symbol(stack[1], " ", "\n"); if (stack[1] == (unsigned) &ret_from_except || stack[1] == (unsigned) &ret_from_except_full || stack[1] == (unsigned) &ret_from_syscall) { if (mread(sp+16, ®s, sizeof(regs)) != sizeof(regs)) break; - printf("\nexception:%x [%x] %x ", regs.trap, sp+16, + printf("exception:%x [%x] %x\n", regs.trap, sp+16, regs.nip); sp = regs.gpr[1]; if (mread(sp, stack, sizeof(stack)) != sizeof(stack)) break; } - printf("\n"); } } @@ -859,11 +880,10 @@ excprint(struct pt_regs *fp) #ifdef CONFIG_SMP printf("cpu %d: ", smp_processor_id()); #endif /* CONFIG_SMP */ - printf("vector: %x at pc = ", fp->trap); - pretty_print_addr(fp->nip); - printf(", lr = "); - pretty_print_addr(fp->link); - printf("\nmsr = %x, sp = %x [%x]\n", fp->msr, fp->gpr[1], fp); + printf("vector: %x at pc=", fp->trap); + xmon_print_symbol(fp->nip, ": ", ", lr="); + xmon_print_symbol(fp->link, ": ", "\n"); + printf("msr = %x, sp = %x [%x]\n", fp->msr, fp->gpr[1], fp); trap = TRAP(fp); if (trap == 0x300 || trap == 0x600) printf("dar = %x, dsisr = %x\n", fp->dar, fp->dsisr); @@ -951,24 +971,6 @@ extern char exc_prolog; extern char dec_exc; void -print_sysmap(void) -{ - extern char *sysmap; - if ( sysmap ) { - printf("System.map: \n"); - if( setjmp(bus_error_jmp) == 0 ) { - debugger_fault_handler = handle_fault; - sync(); - xmon_puts(sysmap); - sync(); - } - debugger_fault_handler = NULL; - } - else - printf("No System.map\n"); -} - -void super_regs(void) { int i, cmd; @@ -1738,7 +1740,7 @@ scanhex(unsigned *vp) printf("invalid register name '%%%s'\n", regname); return 0; } else if (c == '$') { - static char symname[64]; + static char symname[128]; int i; for (i=0; i<63; i++) { c = inchar(); @@ -1749,7 +1751,14 @@ scanhex(unsigned *vp) symname[i] = c; } symname[i++] = 0; - *vp = xmon_symbol_to_addr(symname); + *vp = 0; + if (setjmp(bus_error_jmp) == 0) { + debugger_fault_handler = handle_fault; + sync(); + *vp = kallsyms_lookup_name(symname); + sync(); + } + debugger_fault_handler = NULL; if (!(*vp)) { printf("unknown symbol\n"); return 0; @@ -1840,169 +1849,34 @@ take_input(char *str) lineptr = str; } -void -sysmap_lookup(void) +static void +symbol_lookup(void) { int type = inchar(); unsigned addr; - static char tmp[64]; - char* cur; - - extern char *sysmap; - extern unsigned long sysmap_size; - if ( !sysmap || !sysmap_size ) - return; - - switch(type) { - case 'a': - if (scanhex(&addr)) { - pretty_print_addr(addr); - printf("\n"); - } - termch = 0; - break; - case 's': - getstring(tmp, 64); - if( setjmp(bus_error_jmp) == 0 ) { - debugger_fault_handler = handle_fault; - sync(); - cur = sysmap; - do { - cur = strstr(cur, tmp); - if (cur) { - static char res[64]; - char *p, *d; - p = cur; - while(p > sysmap && *p != 10) - p--; - if (*p == 10) p++; - d = res; - while(*p && p < (sysmap + sysmap_size) && *p != 10) - *(d++) = *(p++); - *(d++) = 0; - printf("%s\n", res); - cur++; - } - } while (cur); - sync(); - } - debugger_fault_handler = NULL; - termch = 0; - break; - } -} + static char tmp[128]; -static int -pretty_print_addr(unsigned long addr) -{ - char *sym; - unsigned long saddr; - - printf("%08x", addr); - sym = xmon_find_symbol(addr, &saddr); - if (sym) - printf(" (%s+0x%x)", sym, addr-saddr); - return (sym != 0); -} - -char* -xmon_find_symbol(unsigned long addr, unsigned long* saddr) -{ - static char rbuffer[64]; - char *p, *ep, *limit; - unsigned long prev, next; - char* psym; - - extern char *sysmap; - extern unsigned long sysmap_size; - if ( !sysmap || !sysmap_size ) - return NULL; - - prev = 0; - psym = NULL; - p = sysmap; - limit = p + sysmap_size; - if( setjmp(bus_error_jmp) == 0 ) { - debugger_fault_handler = handle_fault; - sync(); - do { - next = simple_strtoul(p, &p, 16); - if (next > addr && prev <= addr) { - if (!psym) - goto bail; - ep = rbuffer; - p = psym; - while(*p && p < limit && *p == 32) - p++; - while(*p && p < limit && *p != 10 && (ep - rbuffer) < 63) - *(ep++) = *(p++); - *(ep++) = 0; - if (saddr) - *saddr = prev; - debugger_fault_handler = NULL; - return rbuffer; - } - prev = next; - psym = p; - while(*p && p < limit && *p != 10) - p++; - if (*p) p++; - } while(*p && p < limit && next); -bail: - sync(); + switch (type) { + case 'a': + if (scanhex(&addr)) + xmon_print_symbol(addr, ": ", "\n"); + termch = 0; + break; + case 's': + getstring(tmp, 64); + if (setjmp(bus_error_jmp) == 0) { + debugger_fault_handler = handle_fault; + sync(); + addr = kallsyms_lookup_name(tmp); + if (addr) + printf("%s: %lx\n", tmp, addr); + else + printf("Symbol '%s' not found.\n", tmp); + sync(); + } + debugger_fault_handler = NULL; + termch = 0; + break; } - debugger_fault_handler = NULL; - return NULL; } -unsigned long -xmon_symbol_to_addr(char* symbol) -{ - char *p, *cur; - char *match = NULL; - int goodness = 0; - int result = 0; - - extern char *sysmap; - extern unsigned long sysmap_size; - if ( !sysmap || !sysmap_size ) - return 0; - - if( setjmp(bus_error_jmp) == 0 ) { - debugger_fault_handler = handle_fault; - sync(); - cur = sysmap; - while(cur) { - cur = strstr(cur, symbol); - if (cur) { - int gd = 1; - - /* best match if equal, better match if - * begins with - */ - if (cur == sysmap || *(cur-1) == ' ') { - gd++; - if (cur[strlen(symbol)] == 10) - gd++; - } - if (gd > goodness) { - match = cur; - goodness = gd; - if (gd == 3) - break; - } - cur++; - } - } - if (goodness) { - p = match; - while(p > sysmap && *p != 10) - p--; - if (*p == 10) p++; - result = simple_strtoul(p, &p, 16); - } - sync(); - } - debugger_fault_handler = NULL; - return result; -} |