diff options
Diffstat (limited to 'arch/ppc')
46 files changed, 4808 insertions, 1839 deletions
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index 84d96b857e4..ebc4db8fcc6 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -47,6 +47,7 @@ #include <linux/mm.h> #include <linux/slab.h> #include <linux/init.h> +#include <linux/capability.h> #include <linux/circ_buf.h> #include <linux/serial.h> #include <linux/console.h> diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index cc3f64c084c..d65810108bc 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -8,9 +8,6 @@ config MMU bool default y -config UID16 - bool - config GENERIC_HARDIRQS bool default y @@ -746,6 +743,10 @@ config MPC834x bool default y if MPC834x_SYS +config PPC_83xx + bool + default y if 83xx + config CPM1 bool depends on 8xx diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index e719a4933af..98e940beeb3 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -128,10 +128,9 @@ TOUT := .tmp_gas_check # Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec # instructions. # gcc-3.4 and binutils-2.14 are a fatal combination. -GCC_VERSION := $(call cc-version) checkbin: - @if test "$(GCC_VERSION)" = "0304" ; then \ + @if test "$(call cc-version)" = "0304" ; then \ if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \ echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \ echo 'correctly with gcc-3.4 and your version of binutils.'; \ diff --git a/arch/ppc/amiga/amiints.c b/arch/ppc/amiga/amiints.c index 91195e2ce38..5f35cf3986f 100644 --- a/arch/ppc/amiga/amiints.c +++ b/arch/ppc/amiga/amiints.c @@ -96,8 +96,8 @@ void amiga_init_IRQ(void) gayle.inten = GAYLE_IRQ_IDE; /* turn off all interrupts... */ - custom.intena = 0x7fff; - custom.intreq = 0x7fff; + amiga_custom.intena = 0x7fff; + amiga_custom.intreq = 0x7fff; #ifdef CONFIG_APUS /* Clear any inter-CPU interrupt requests. Circumvents bug in @@ -110,7 +110,7 @@ void amiga_init_IRQ(void) APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET | IPLEMU_IPLMASK); #endif /* ... and enable the master interrupt bit */ - custom.intena = IF_SETCLR | IF_INTEN; + amiga_custom.intena = IF_SETCLR | IF_INTEN; cia_init_IRQ(&ciaa_base); cia_init_IRQ(&ciab_base); @@ -151,7 +151,7 @@ void amiga_enable_irq(unsigned int irq) } /* enable the interrupt */ - custom.intena = IF_SETCLR | ami_intena_vals[irq]; + amiga_custom.intena = IF_SETCLR | ami_intena_vals[irq]; } void amiga_disable_irq(unsigned int irq) @@ -177,7 +177,7 @@ void amiga_disable_irq(unsigned int irq) } /* disable the interrupt */ - custom.intena = ami_intena_vals[irq]; + amiga_custom.intena = ami_intena_vals[irq]; } inline void amiga_do_irq(int irq, struct pt_regs *fp) @@ -196,7 +196,7 @@ void amiga_do_irq_list(int irq, struct pt_regs *fp) kstat_cpu(0).irqs[irq]++; - custom.intreq = ami_intena_vals[irq]; + amiga_custom.intreq = ami_intena_vals[irq]; for (action = desc->action; action; action = action->next) action->handler(irq, action->dev_id, fp); @@ -208,40 +208,40 @@ void amiga_do_irq_list(int irq, struct pt_regs *fp) static void ami_int1(int irq, void *dev_id, struct pt_regs *fp) { - unsigned short ints = custom.intreqr & custom.intenar; + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; /* if serial transmit buffer empty, interrupt */ if (ints & IF_TBE) { - custom.intreq = IF_TBE; + amiga_custom.intreq = IF_TBE; amiga_do_irq(IRQ_AMIGA_TBE, fp); } /* if floppy disk transfer complete, interrupt */ if (ints & IF_DSKBLK) { - custom.intreq = IF_DSKBLK; + amiga_custom.intreq = IF_DSKBLK; amiga_do_irq(IRQ_AMIGA_DSKBLK, fp); } /* if software interrupt set, interrupt */ if (ints & IF_SOFT) { - custom.intreq = IF_SOFT; + amiga_custom.intreq = IF_SOFT; amiga_do_irq(IRQ_AMIGA_SOFT, fp); } } static void ami_int3(int irq, void *dev_id, struct pt_regs *fp) { - unsigned short ints = custom.intreqr & custom.intenar; + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; /* if a blitter interrupt */ if (ints & IF_BLIT) { - custom.intreq = IF_BLIT; + amiga_custom.intreq = IF_BLIT; amiga_do_irq(IRQ_AMIGA_BLIT, fp); } /* if a copper interrupt */ if (ints & IF_COPER) { - custom.intreq = IF_COPER; + amiga_custom.intreq = IF_COPER; amiga_do_irq(IRQ_AMIGA_COPPER, fp); } @@ -252,36 +252,36 @@ static void ami_int3(int irq, void *dev_id, struct pt_regs *fp) static void ami_int4(int irq, void *dev_id, struct pt_regs *fp) { - unsigned short ints = custom.intreqr & custom.intenar; + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; /* if audio 0 interrupt */ if (ints & IF_AUD0) { - custom.intreq = IF_AUD0; + amiga_custom.intreq = IF_AUD0; amiga_do_irq(IRQ_AMIGA_AUD0, fp); } /* if audio 1 interrupt */ if (ints & IF_AUD1) { - custom.intreq = IF_AUD1; + amiga_custom.intreq = IF_AUD1; amiga_do_irq(IRQ_AMIGA_AUD1, fp); } /* if audio 2 interrupt */ if (ints & IF_AUD2) { - custom.intreq = IF_AUD2; + amiga_custom.intreq = IF_AUD2; amiga_do_irq(IRQ_AMIGA_AUD2, fp); } /* if audio 3 interrupt */ if (ints & IF_AUD3) { - custom.intreq = IF_AUD3; + amiga_custom.intreq = IF_AUD3; amiga_do_irq(IRQ_AMIGA_AUD3, fp); } } static void ami_int5(int irq, void *dev_id, struct pt_regs *fp) { - unsigned short ints = custom.intreqr & custom.intenar; + unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar; /* if serial receive buffer full interrupt */ if (ints & IF_RBF) { @@ -291,7 +291,7 @@ static void ami_int5(int irq, void *dev_id, struct pt_regs *fp) /* if a disk sync interrupt */ if (ints & IF_DSKSYN) { - custom.intreq = IF_DSKSYN; + amiga_custom.intreq = IF_DSKSYN; amiga_do_irq(IRQ_AMIGA_DSKSYN, fp); } } diff --git a/arch/ppc/amiga/cia.c b/arch/ppc/amiga/cia.c index ad961465b6c..4431c58f611 100644 --- a/arch/ppc/amiga/cia.c +++ b/arch/ppc/amiga/cia.c @@ -66,7 +66,7 @@ static unsigned char cia_set_irq_private(struct ciabase *base, else base->icr_data &= ~mask; if (base->icr_data & base->icr_mask) - custom.intreq = IF_SETCLR | base->int_mask; + amiga_custom.intreq = IF_SETCLR | base->int_mask; return old & base->icr_mask; } @@ -114,7 +114,7 @@ static unsigned char cia_able_irq_private(struct ciabase *base, base->icr_mask &= CIA_ICR_ALL; if (base->icr_data & base->icr_mask) - custom.intreq = IF_SETCLR | base->int_mask; + amiga_custom.intreq = IF_SETCLR | base->int_mask; return old; } @@ -145,7 +145,7 @@ static void cia_handler(int irq, void *dev_id, struct pt_regs *fp) irq = base->cia_irq; desc = irq_desc + irq; ints = cia_set_irq_private(base, CIA_ICR_ALL); - custom.intreq = base->int_mask; + amiga_custom.intreq = base->int_mask; for (i = 0; i < CIA_IRQS; i++, irq++) { if (ints & 1) { kstat_cpu(0).irqs[irq]++; @@ -174,5 +174,5 @@ void __init cia_init_IRQ(struct ciabase *base) action->name = base->name; setup_irq(base->handler_irq, &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO]); - custom.intena = IF_SETCLR | base->int_mask; + amiga_custom.intena = IF_SETCLR | base->int_mask; } diff --git a/arch/ppc/amiga/config.c b/arch/ppc/amiga/config.c index af881d7454d..60e2da1c92c 100644 --- a/arch/ppc/amiga/config.c +++ b/arch/ppc/amiga/config.c @@ -90,9 +90,6 @@ static void a3000_gettod (int *, int *, int *, int *, int *, int *); static void a2000_gettod (int *, int *, int *, int *, int *, int *); static int amiga_hwclk (int, struct hwclk_time *); static int amiga_set_clock_mmss (unsigned long); -#ifdef CONFIG_AMIGA_FLOPPY -extern void amiga_floppy_setup(char *, int *); -#endif static void amiga_reset (void); extern void amiga_init_sound(void); static void amiga_savekmsg_init(void); @@ -281,7 +278,7 @@ static void __init amiga_identify(void) case CS_OCS: case CS_ECS: case CS_AGA: - switch (custom.deniseid & 0xf) { + switch (amiga_custom.deniseid & 0xf) { case 0x0c: AMIGAHW_SET(DENISE_HR); break; @@ -294,7 +291,7 @@ static void __init amiga_identify(void) AMIGAHW_SET(DENISE); break; } - switch ((custom.vposr>>8) & 0x7f) { + switch ((amiga_custom.vposr>>8) & 0x7f) { case 0x00: AMIGAHW_SET(AGNUS_PAL); break; @@ -419,9 +416,6 @@ void __init config_amiga(void) mach_hwclk = amiga_hwclk; mach_set_clock_mmss = amiga_set_clock_mmss; -#ifdef CONFIG_AMIGA_FLOPPY - mach_floppy_setup = amiga_floppy_setup; -#endif mach_reset = amiga_reset; #ifdef CONFIG_HEARTBEAT mach_heartbeat = amiga_heartbeat; @@ -432,9 +426,9 @@ void __init config_amiga(void) amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */ /* clear all DMA bits */ - custom.dmacon = DMAF_ALL; + amiga_custom.dmacon = DMAF_ALL; /* ensure that the DMA master bit is set */ - custom.dmacon = DMAF_SETCLR | DMAF_MASTER; + amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER; /* request all RAM */ for (i = 0; i < m68k_num_memory; i++) { @@ -753,9 +747,9 @@ static void amiga_savekmsg_init(void) static void amiga_serial_putc(char c) { - custom.serdat = (unsigned char)c | 0x100; + amiga_custom.serdat = (unsigned char)c | 0x100; mb(); - while (!(custom.serdatr & 0x2000)) + while (!(amiga_custom.serdatr & 0x2000)) ; } @@ -785,11 +779,11 @@ int amiga_serial_console_wait_key(struct console *co) { int ch; - while (!(custom.intreqr & IF_RBF)) + while (!(amiga_custom.intreqr & IF_RBF)) barrier(); - ch = custom.serdatr & 0xff; + ch = amiga_custom.serdatr & 0xff; /* clear the interrupt, so that another character can be read */ - custom.intreq = IF_RBF; + amiga_custom.intreq = IF_RBF; return ch; } diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S index c96c9f80521..368ec035e6c 100644 --- a/arch/ppc/boot/common/util.S +++ b/arch/ppc/boot/common/util.S @@ -234,7 +234,8 @@ udelay: * First, flush the data cache in case it was enabled and may be * holding instructions for copy back. */ -_GLOBAL(flush_instruction_cache) + .globl flush_instruction_cache +flush_instruction_cache: mflr r6 bl flush_data_cache @@ -279,7 +280,8 @@ _GLOBAL(flush_instruction_cache) * Flush data cache * Do this by just reading lots of stuff into the cache. */ -_GLOBAL(flush_data_cache) + .globl flush_data_cache +flush_data_cache: lis r3,cache_flush_buffer@h ori r3,r3,cache_flush_buffer@l li r4,NUM_CACHE_LINES diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile index 532e7ef1edb..58415d5718e 100644 --- a/arch/ppc/boot/images/Makefile +++ b/arch/ppc/boot/images/Makefile @@ -26,7 +26,7 @@ quiet_cmd_uimage = UIMAGE $@ targets += uImage $(obj)/uImage: $(obj)/vmlinux.gz $(Q)rm -f $@ - $(call if_changed,uimage) + $(call cmd,uimage) @echo -n ' Image: $@ ' @if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index f3e9c534aa8..9533f8de238 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -190,6 +190,8 @@ boot-$(CONFIG_REDWOOD_5) += embed_config.o boot-$(CONFIG_REDWOOD_6) += embed_config.o boot-$(CONFIG_8xx) += embed_config.o boot-$(CONFIG_8260) += embed_config.o +boot-$(CONFIG_EP405) += embed_config.o +boot-$(CONFIG_XILINX_ML300) += embed_config.o boot-$(CONFIG_BSEIP) += iic.o boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o boot-$(CONFIG_MV64X60) += misc-mv64x60.o diff --git a/arch/ppc/configs/TQM8540_defconfig b/arch/ppc/configs/TQM8540_defconfig new file mode 100644 index 00000000000..99bf3b7a276 --- /dev/null +++ b/arch/ppc/configs/TQM8540_defconfig @@ -0,0 +1,973 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc2 +# Fri Nov 25 17:26:50 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_PPC_GEN550=y +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8548_CDS is not set +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +CONFIG_TQM8540=y +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +CONFIG_MPC8540=y + +# +# Platform options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_TQM85xx=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/TQM8541_defconfig b/arch/ppc/configs/TQM8541_defconfig new file mode 100644 index 00000000000..0ff56695d34 --- /dev/null +++ b/arch/ppc/configs/TQM8541_defconfig @@ -0,0 +1,986 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc2 +# Wed Nov 30 13:36:28 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_PPC_GEN550=y +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8548_CDS is not set +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +CONFIG_TQM8541=y +# CONFIG_TQM8555 is not set +# CONFIG_TQM8560 is not set +CONFIG_MPC8555=y + +# +# Platform options +# +CONFIG_CPM2=y +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_TQM85xx=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_FS_ENET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_MPC8260 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_MAX6900 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8563 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set +# CONFIG_SCC_ENET is not set +# CONFIG_FEC_ENET is not set + +# +# CPM2 Options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_KGDB_CONSOLE is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/TQM8555_defconfig b/arch/ppc/configs/TQM8555_defconfig new file mode 100644 index 00000000000..730b3db2e47 --- /dev/null +++ b/arch/ppc/configs/TQM8555_defconfig @@ -0,0 +1,983 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc2 +# Thu Nov 24 17:10:52 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_PPC_GEN550=y +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8548_CDS is not set +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +CONFIG_TQM8555=y +# CONFIG_TQM8560 is not set +CONFIG_MPC8555=y + +# +# Platform options +# +CONFIG_CPM2=y +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_TQM85xx=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_FS_ENET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set +# CONFIG_SCC_ENET is not set +# CONFIG_FEC_ENET is not set + +# +# CPM2 Options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_KGDB_CONSOLE is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/TQM8560_defconfig b/arch/ppc/configs/TQM8560_defconfig new file mode 100644 index 00000000000..1d902072825 --- /dev/null +++ b/arch/ppc/configs/TQM8560_defconfig @@ -0,0 +1,992 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc2 +# Wed Nov 30 16:47:53 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_E500=y +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_MATH_EMULATION=y +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y + +# +# Freescale 85xx options +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8548_CDS is not set +# CONFIG_MPC8555_CDS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_SBC8560 is not set +# CONFIG_STX_GP3 is not set +# CONFIG_TQM8540 is not set +# CONFIG_TQM8541 is not set +# CONFIG_TQM8555 is not set +CONFIG_TQM8560=y +CONFIG_MPC8560=y + +# +# Platform options +# +CONFIG_CPM2=y +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +# CONFIG_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_TQM85xx=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_FS_ENET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +CONFIG_SERIAL_CPM_SCC1=y +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +# CONFIG_SERIAL_CPM_SMC1 is not set +# CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_MPC8260 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_MAX6900 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8563 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM75=y +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set +# CONFIG_SCC_ENET is not set +# CONFIG_FEC_ENET is not set + +# +# CPM2 Options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_KGDB_CONSOLE is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 0bb23fce429..ca020130086 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,6 @@ extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds obj-y := entry.o traps.o idle.o time.o misc.o \ - process.o \ setup.o \ ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o @@ -49,5 +48,4 @@ obj-$(CONFIG_TAU) += temp.o ifndef CONFIG_E200 obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o endif -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o endif diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c index fe0e767fb94..7964bf660e9 100644 --- a/arch/ppc/kernel/asm-offsets.c +++ b/arch/ppc/kernel/asm-offsets.c @@ -131,7 +131,7 @@ main(void) DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features)); DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup)); - DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror)); + DEFINE(TI_SIGFRAME, offsetof(struct thread_info, nvgprs_frame)); DEFINE(TI_TASK, offsetof(struct thread_info, task)); DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index f044edbb454..a48b950722a 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -200,8 +200,6 @@ _GLOBAL(DoSyscall) bl do_show_syscall #endif /* SHOW_SYSCALLS */ rlwinm r10,r1,0,0,18 /* current_thread_info() */ - li r11,0 - stb r11,TI_SC_NOERR(r10) lwz r11,TI_FLAGS(r10) andi. r11,r11,_TIF_SYSCALL_T_OR_A bne- syscall_dotrace @@ -222,25 +220,21 @@ ret_from_syscall: bl do_show_syscall_exit #endif mr r6,r3 - li r11,-_LAST_ERRNO - cmplw 0,r3,r11 rlwinm r12,r1,0,0,18 /* current_thread_info() */ - blt+ 30f - lbz r11,TI_SC_NOERR(r12) - cmpwi r11,0 - bne 30f - neg r3,r3 - lwz r10,_CCR(r1) /* Set SO bit in CR */ - oris r10,r10,0x1000 - stw r10,_CCR(r1) - /* disable interrupts so current_thread_info()->flags can't change */ -30: LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ + LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ SYNC MTMSRD(r10) lwz r9,TI_FLAGS(r12) - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED) + li r8,-_LAST_ERRNO + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL) bne- syscall_exit_work + cmplw 0,r3,r8 + blt+ syscall_exit_cont + lwz r11,_CCR(r1) /* Load CR */ + neg r3,r3 + oris r11,r11,0x1000 /* Set SO bit in CR */ + stw r11,_CCR(r1) syscall_exit_cont: #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) /* If the process has its own DBCR0 value, load it up. The single @@ -292,46 +286,113 @@ syscall_dotrace: b syscall_dotrace_cont syscall_exit_work: - stw r6,RESULT(r1) /* Save result */ + andi. r0,r9,_TIF_RESTOREALL + bne- 2f + cmplw 0,r3,r8 + blt+ 1f + andi. r0,r9,_TIF_NOERROR + bne- 1f + lwz r11,_CCR(r1) /* Load CR */ + neg r3,r3 + oris r11,r11,0x1000 /* Set SO bit in CR */ + stw r11,_CCR(r1) + +1: stw r6,RESULT(r1) /* Save result */ stw r3,GPR3(r1) /* Update return value */ - andi. r0,r9,_TIF_SYSCALL_T_OR_A - beq 5f - ori r10,r10,MSR_EE - SYNC - MTMSRD(r10) /* re-enable interrupts */ +2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) + beq 4f + + /* Clear per-syscall TIF flags if any are set, but _leave_ + _TIF_SAVE_NVGPRS set in r9 since we haven't dealt with that + yet. */ + + li r11,_TIF_PERSYSCALL_MASK + addi r12,r12,TI_FLAGS +3: lwarx r8,0,r12 + andc r8,r8,r11 +#ifdef CONFIG_IBM405_ERR77 + dcbt 0,r12 +#endif + stwcx. r8,0,r12 + bne- 3b + subi r12,r12,TI_FLAGS + +4: /* Anything which requires enabling interrupts? */ + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_SAVE_NVGPRS) + beq 7f + + /* Save NVGPRS if they're not saved already */ lwz r4,TRAP(r1) andi. r4,r4,1 - beq 4f + beq 5f SAVE_NVGPRS(r1) li r4,0xc00 stw r4,TRAP(r1) -4: + + /* Re-enable interrupts */ +5: ori r10,r10,MSR_EE + SYNC + MTMSRD(r10) + + andi. r0,r9,_TIF_SAVE_NVGPRS + bne save_user_nvgprs + +save_user_nvgprs_cont: + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) + beq 7f + addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_leave REST_NVGPRS(r1) -2: - lwz r3,GPR3(r1) + +6: lwz r3,GPR3(r1) LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */ SYNC MTMSRD(r10) /* disable interrupts again */ rlwinm r12,r1,0,0,18 /* current_thread_info() */ lwz r9,TI_FLAGS(r12) -5: +7: andi. r0,r9,_TIF_NEED_RESCHED - bne 1f + bne 8f lwz r5,_MSR(r1) andi. r5,r5,MSR_PR - beq syscall_exit_cont + beq ret_from_except andi. r0,r9,_TIF_SIGPENDING - beq syscall_exit_cont + beq ret_from_except b do_user_signal -1: +8: ori r10,r10,MSR_EE SYNC MTMSRD(r10) /* re-enable interrupts */ bl schedule - b 2b + b 6b + +save_user_nvgprs: + lwz r8,TI_SIGFRAME(r12) + +.macro savewords start, end + 1: stw \start,4*(\start)(r8) + .section __ex_table,"a" + .align 2 + .long 1b,save_user_nvgprs_fault + .previous + .if \end - \start + savewords "(\start+1)",\end + .endif +.endm + savewords 14,31 + b save_user_nvgprs_cont + + +save_user_nvgprs_fault: + li r3,11 /* SIGSEGV */ + lwz r4,TI_TASK(r12) + bl force_sigsegv + rlwinm r12,r1,0,0,18 /* current_thread_info() */ + lwz r9,TI_FLAGS(r12) + b save_user_nvgprs_cont + #ifdef SHOW_SYSCALLS do_show_syscall: #ifdef SHOW_SYSCALLS_TASK @@ -401,28 +462,10 @@ show_syscalls_task: #endif /* SHOW_SYSCALLS */ /* - * The sigsuspend and rt_sigsuspend system calls can call do_signal - * and thus put the process into the stopped state where we might - * want to examine its user state with ptrace. Therefore we need - * to save all the nonvolatile registers (r13 - r31) before calling - * the C code. + * The fork/clone functions need to copy the full register set into + * the child process. Therefore we need to save all the nonvolatile + * registers (r13 - r31) before calling the C code. */ - .globl ppc_sigsuspend -ppc_sigsuspend: - SAVE_NVGPRS(r1) - lwz r0,TRAP(r1) - rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ - stw r0,TRAP(r1) /* register set saved */ - b sys_sigsuspend - - .globl ppc_rt_sigsuspend -ppc_rt_sigsuspend: - SAVE_NVGPRS(r1) - lwz r0,TRAP(r1) - rlwinm r0,r0,0,0,30 - stw r0,TRAP(r1) - b sys_rt_sigsuspend - .globl ppc_fork ppc_fork: SAVE_NVGPRS(r1) @@ -447,14 +490,6 @@ ppc_clone: stw r0,TRAP(r1) /* register set saved */ b sys_clone - .globl ppc_swapcontext -ppc_swapcontext: - SAVE_NVGPRS(r1) - lwz r0,TRAP(r1) - rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ - stw r0,TRAP(r1) /* register set saved */ - b sys_swapcontext - /* * Top-level page fault handling. * This is in assembler because if do_page_fault tells us that @@ -626,16 +661,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) .long ret_from_except #endif - .globl sigreturn_exit -sigreturn_exit: - subi r1,r3,STACK_FRAME_OVERHEAD - rlwinm r12,r1,0,0,18 /* current_thread_info() */ - lwz r9,TI_FLAGS(r12) - andi. r0,r9,_TIF_SYSCALL_T_OR_A - beq+ ret_from_except_full - bl do_syscall_trace_leave - /* fall through */ - .globl ret_from_except_full ret_from_except_full: REST_NVGPRS(r1) @@ -658,7 +683,7 @@ user_exc_return: /* r10 contains MSR_KERNEL here */ /* Check current_thread_info()->flags */ rlwinm r9,r1,0,0,18 lwz r9,TI_FLAGS(r9) - andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED) + andi. r0,r9,(_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_RESTOREALL) bne do_work restore_user: diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c index 821a75e4560..1be3ca5bae4 100644 --- a/arch/ppc/kernel/idle.c +++ b/arch/ppc/kernel/idle.c @@ -37,7 +37,6 @@ void default_idle(void) { void (*powersave)(void); - int cpu = smp_processor_id(); powersave = ppc_md.power_save; @@ -47,7 +46,8 @@ void default_idle(void) #ifdef CONFIG_SMP else { set_thread_flag(TIF_POLLING_NRFLAG); - while (!need_resched() && !cpu_is_offline(cpu)) + while (!need_resched() && + !cpu_is_offline(smp_processor_id())) barrier(); clear_thread_flag(TIF_POLLING_NRFLAG); } diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c index a882b0dbe8d..84d65a87191 100644 --- a/arch/ppc/kernel/machine_kexec.c +++ b/arch/ppc/kernel/machine_kexec.c @@ -28,12 +28,6 @@ typedef NORET_TYPE void (*relocate_new_kernel_t)( const extern unsigned char relocate_new_kernel[]; const extern unsigned int relocate_new_kernel_size; -/* - * Provide a dummy crash_notes definition while crash dump arrives to ppc. - * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. - */ -note_buf_t crash_notes[NR_CPUS]; - void machine_shutdown(void) { if (ppc_md.machine_shutdown) diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 5e61124581d..fb5658bba28 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -1197,7 +1197,7 @@ _GLOBAL(sys_call_table) .long sys_ssetmask .long sys_setreuid /* 70 */ .long sys_setregid - .long ppc_sigsuspend + .long sys_sigsuspend .long sys_sigpending .long sys_sethostname .long sys_setrlimit /* 75 */ @@ -1303,7 +1303,7 @@ _GLOBAL(sys_call_table) .long sys_rt_sigpending /* 175 */ .long sys_rt_sigtimedwait .long sys_rt_sigqueueinfo - .long ppc_rt_sigsuspend + .long sys_rt_sigsuspend .long sys_pread64 .long sys_pwrite64 /* 180 */ .long sys_chown @@ -1374,7 +1374,7 @@ _GLOBAL(sys_call_table) .long sys_clock_gettime .long sys_clock_getres .long sys_clock_nanosleep - .long ppc_swapcontext + .long sys_swapcontext .long sys_tgkill /* 250 */ .long sys_utimes .long sys_statfs64 diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index f7fae5f153b..704c846b2b0 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -503,7 +503,7 @@ pcibios_allocate_resources(int pass) u16 command; struct resource *r; - while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); for (idx = 0; idx < 6; idx++) { r = &dev->resource[idx]; @@ -540,7 +540,7 @@ pcibios_assign_resources(void) int idx; struct resource *r; - while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + for_each_pci_dev(dev) { int class = dev->class >> 8; /* Don't touch classless devices and host bridges */ @@ -815,8 +815,7 @@ EXPORT_SYMBOL(pci_device_to_OF_node); * to set pci_assign_all_buses to 1 and still use RTAS for PCI * config cycles. */ -struct pci_controller* -pci_find_hose_for_OF_device(struct device_node* node) +struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) { if (!have_of) return NULL; @@ -868,14 +867,15 @@ pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn) */ if (!pci_to_OF_bus_map) return 0; - while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - if (pci_to_OF_bus_map[dev->bus->number] != *bus) - continue; - if (dev->devfn != *devfn) - continue; - *bus = dev->bus->number; - return 0; - } + + for_each_pci_dev(dev) + if (pci_to_OF_bus_map[dev->bus->number] == *bus && + dev->devfn == *devfn) { + *bus = dev->bus->number; + pci_dev_put(dev); + return 0; + } + return -ENODEV; } EXPORT_SYMBOL(pci_device_from_OF_node); @@ -942,7 +942,7 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose, while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { res = NULL; size = ranges[na+4]; - switch (ranges[0] >> 24) { + switch ((ranges[0] >> 24) & 0x3) { case 1: /* I/O space */ if (ranges[2] != 0) break; @@ -956,6 +956,8 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose, res = &hose->io_resource; res->flags = IORESOURCE_IO; res->start = ranges[2]; + DBG("PCI: IO 0x%lx -> 0x%lx\n", + res->start, res->start + size - 1); break; case 2: /* memory space */ memno = 0; @@ -973,7 +975,11 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose, if (memno < 3) { res = &hose->mem_resources[memno]; res->flags = IORESOURCE_MEM; + if(ranges[0] & 0x40000000) + res->flags |= IORESOURCE_PREFETCH; res->start = ranges[na+2]; + DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno, + res->start, res->start + size - 1); } break; } @@ -1806,6 +1812,23 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr) EXPORT_SYMBOL(pci_iomap); EXPORT_SYMBOL(pci_iounmap); +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct pci_controller* hose = hose_head; + + for (; hose; hose = hose->next) { + unsigned int size = hose->io_resource.end - + hose->io_resource.start + 1; + if (address >= hose->io_base_phys && + address < (hose->io_base_phys + size)) { + unsigned long base = + (unsigned long)hose->io_base_virt - _IO_BASE; + return base + (address - hose->io_base_phys); + } + } + return (unsigned int)-1; +} +EXPORT_SYMBOL(pci_address_to_pio); /* * Null PCI config access functions, for the case when we can't diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c index ca810025993..2f5c7650274 100644 --- a/arch/ppc/kernel/ppc_htab.c +++ b/arch/ppc/kernel/ppc_htab.c @@ -16,6 +16,7 @@ #include <linux/proc_fs.h> #include <linux/stat.h> #include <linux/sysctl.h> +#include <linux/capability.h> #include <linux/ctype.h> #include <linux/threads.h> #include <linux/smp_lock.h> diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index bb6a5c6a64b..95075f99a6d 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -82,10 +82,6 @@ EXPORT_SYMBOL(ppc_n_lost_interrupts); EXPORT_SYMBOL(ISA_DMA_THRESHOLD); EXPORT_SYMBOL(DMA_MODE_READ); EXPORT_SYMBOL(DMA_MODE_WRITE); -#if defined(CONFIG_PPC_PREP) -EXPORT_SYMBOL(_prep_type); -EXPORT_SYMBOL(ucSystemType); -#endif #if !defined(__INLINE_BITOPS) EXPORT_SYMBOL(set_bit); @@ -311,7 +307,6 @@ EXPORT_SYMBOL(__res); EXPORT_SYMBOL(next_mmu_context); EXPORT_SYMBOL(set_context); -EXPORT_SYMBOL_GPL(__handle_mm_fault); /* For MOL */ EXPORT_SYMBOL(disarm_decr); #ifdef CONFIG_PPC_STD_MMU extern long mol_trampoline; diff --git a/arch/ppc/kernel/process.c b/arch/ppc/kernel/process.c deleted file mode 100644 index 25cbdc8d294..00000000000 --- a/arch/ppc/kernel/process.c +++ /dev/null @@ -1,851 +0,0 @@ -/* - * arch/ppc/kernel/process.c - * - * Derived from "arch/i386/kernel/process.c" - * Copyright (C) 1995 Linus Torvalds - * - * Updated and modified by Cort Dougan (cort@cs.nmt.edu) and - * Paul Mackerras (paulus@cs.anu.edu.au) - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/elf.h> -#include <linux/init.h> -#include <linux/prctl.h> -#include <linux/init_task.h> -#include <linux/module.h> -#include <linux/kallsyms.h> -#include <linux/mqueue.h> -#include <linux/hardirq.h> - -#include <asm/pgtable.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/prom.h> - -extern unsigned long _get_SP(void); - -struct task_struct *last_task_used_math = NULL; -struct task_struct *last_task_used_altivec = NULL; -struct task_struct *last_task_used_spe = NULL; - -static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -struct mm_struct init_mm = INIT_MM(init_mm); -EXPORT_SYMBOL(init_mm); - -/* this is 8kB-aligned so we can get to the thread_info struct - at the base of it from the stack pointer with 1 integer instruction. */ -union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = -{ INIT_THREAD_INFO(init_task) }; - -/* initial task structure */ -struct task_struct init_task = INIT_TASK(init_task); -EXPORT_SYMBOL(init_task); - -/* only used to get secondary processor up */ -struct task_struct *current_set[NR_CPUS] = {&init_task, }; - -#undef SHOW_TASK_SWITCHES -#undef CHECK_STACK - -#if defined(CHECK_STACK) -unsigned long -kernel_stack_top(struct task_struct *tsk) -{ - return ((unsigned long)tsk) + sizeof(union task_union); -} - -unsigned long -task_top(struct task_struct *tsk) -{ - return ((unsigned long)tsk) + sizeof(struct thread_info); -} - -/* check to make sure the kernel stack is healthy */ -int check_stack(struct task_struct *tsk) -{ - unsigned long stack_top = kernel_stack_top(tsk); - unsigned long tsk_top = task_top(tsk); - int ret = 0; - -#if 0 - /* check thread magic */ - if ( tsk->thread.magic != THREAD_MAGIC ) - { - ret |= 1; - printk("thread.magic bad: %08x\n", tsk->thread.magic); - } -#endif - - if ( !tsk ) - printk("check_stack(): tsk bad tsk %p\n",tsk); - - /* check if stored ksp is bad */ - if ( (tsk->thread.ksp > stack_top) || (tsk->thread.ksp < tsk_top) ) - { - printk("stack out of bounds: %s/%d\n" - " tsk_top %08lx ksp %08lx stack_top %08lx\n", - tsk->comm,tsk->pid, - tsk_top, tsk->thread.ksp, stack_top); - ret |= 2; - } - - /* check if stack ptr RIGHT NOW is bad */ - if ( (tsk == current) && ((_get_SP() > stack_top ) || (_get_SP() < tsk_top)) ) - { - printk("current stack ptr out of bounds: %s/%d\n" - " tsk_top %08lx sp %08lx stack_top %08lx\n", - current->comm,current->pid, - tsk_top, _get_SP(), stack_top); - ret |= 4; - } - -#if 0 - /* check amount of free stack */ - for ( i = (unsigned long *)task_top(tsk) ; i < kernel_stack_top(tsk) ; i++ ) - { - if ( !i ) - printk("check_stack(): i = %p\n", i); - if ( *i != 0 ) - { - /* only notify if it's less than 900 bytes */ - if ( (i - (unsigned long *)task_top(tsk)) < 900 ) - printk("%d bytes free on stack\n", - i - task_top(tsk)); - break; - } - } -#endif - - if (ret) - { - panic("bad kernel stack"); - } - return(ret); -} -#endif /* defined(CHECK_STACK) */ - -/* - * Make sure the floating-point register state in the - * the thread_struct is up to date for task tsk. - */ -void flush_fp_to_thread(struct task_struct *tsk) -{ - if (tsk->thread.regs) { - /* - * We need to disable preemption here because if we didn't, - * another process could get scheduled after the regs->msr - * test but before we have finished saving the FP registers - * to the thread_struct. That process could take over the - * FPU, and then when we get scheduled again we would store - * bogus values for the remaining FP registers. - */ - preempt_disable(); - if (tsk->thread.regs->msr & MSR_FP) { -#ifdef CONFIG_SMP - /* - * This should only ever be called for current or - * for a stopped child process. Since we save away - * the FP register state on context switch on SMP, - * there is something wrong if a stopped child appears - * to still have its FP state in the CPU registers. - */ - BUG_ON(tsk != current); -#endif - giveup_fpu(current); - } - preempt_enable(); - } -} - -void enable_kernel_fp(void) -{ - WARN_ON(preemptible()); - -#ifdef CONFIG_SMP - if (current->thread.regs && (current->thread.regs->msr & MSR_FP)) - giveup_fpu(current); - else - giveup_fpu(NULL); /* just enables FP for kernel */ -#else - giveup_fpu(last_task_used_math); -#endif /* CONFIG_SMP */ -} -EXPORT_SYMBOL(enable_kernel_fp); - -int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs) -{ - preempt_disable(); - if (tsk->thread.regs && (tsk->thread.regs->msr & MSR_FP)) - giveup_fpu(tsk); - preempt_enable(); - memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs)); - return 1; -} - -#ifdef CONFIG_ALTIVEC -void enable_kernel_altivec(void) -{ - WARN_ON(preemptible()); - -#ifdef CONFIG_SMP - if (current->thread.regs && (current->thread.regs->msr & MSR_VEC)) - giveup_altivec(current); - else - giveup_altivec(NULL); /* just enable AltiVec for kernel - force */ -#else - giveup_altivec(last_task_used_altivec); -#endif /* __SMP __ */ -} -EXPORT_SYMBOL(enable_kernel_altivec); - -/* - * Make sure the VMX/Altivec register state in the - * the thread_struct is up to date for task tsk. - */ -void flush_altivec_to_thread(struct task_struct *tsk) -{ - if (tsk->thread.regs) { - preempt_disable(); - if (tsk->thread.regs->msr & MSR_VEC) { -#ifdef CONFIG_SMP - BUG_ON(tsk != current); -#endif - giveup_altivec(current); - } - preempt_enable(); - } -} - -int dump_altivec(struct pt_regs *regs, elf_vrregset_t *vrregs) -{ - if (regs->msr & MSR_VEC) - giveup_altivec(current); - memcpy(vrregs, ¤t->thread.vr[0], sizeof(*vrregs)); - return 1; -} -#endif /* CONFIG_ALTIVEC */ - -#ifdef CONFIG_SPE -void -enable_kernel_spe(void) -{ - WARN_ON(preemptible()); - -#ifdef CONFIG_SMP - if (current->thread.regs && (current->thread.regs->msr & MSR_SPE)) - giveup_spe(current); - else - giveup_spe(NULL); /* just enable SPE for kernel - force */ -#else - giveup_spe(last_task_used_spe); -#endif /* __SMP __ */ -} -EXPORT_SYMBOL(enable_kernel_spe); - -void flush_spe_to_thread(struct task_struct *tsk) -{ - if (tsk->thread.regs) { - preempt_disable(); - if (tsk->thread.regs->msr & MSR_SPE) { -#ifdef CONFIG_SMP - BUG_ON(tsk != current); -#endif - giveup_spe(current); - } - preempt_enable(); - } -} - -int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs) -{ - if (regs->msr & MSR_SPE) - giveup_spe(current); - /* We copy u32 evr[32] + u64 acc + u32 spefscr -> 35 */ - memcpy(evrregs, ¤t->thread.evr[0], sizeof(u32) * 35); - return 1; -} -#endif /* CONFIG_SPE */ - -struct task_struct *__switch_to(struct task_struct *prev, - struct task_struct *new) -{ - struct thread_struct *new_thread, *old_thread; - unsigned long s; - struct task_struct *last; - - local_irq_save(s); -#ifdef CHECK_STACK - check_stack(prev); - check_stack(new); -#endif - -#ifdef CONFIG_SMP - /* avoid complexity of lazy save/restore of fpu - * by just saving it every time we switch out if - * this task used the fpu during the last quantum. - * - * If it tries to use the fpu again, it'll trap and - * reload its fp regs. So we don't have to do a restore - * every switch, just a save. - * -- Cort - */ - if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP)) - giveup_fpu(prev); -#ifdef CONFIG_ALTIVEC - /* - * If the previous thread used altivec in the last quantum - * (thus changing altivec regs) then save them. - * We used to check the VRSAVE register but not all apps - * set it, so we don't rely on it now (and in fact we need - * to save & restore VSCR even if VRSAVE == 0). -- paulus - * - * On SMP we always save/restore altivec regs just to avoid the - * complexity of changing processors. - * -- Cort - */ - if ((prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))) - giveup_altivec(prev); -#endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - /* - * If the previous thread used spe in the last quantum - * (thus changing spe regs) then save them. - * - * On SMP we always save/restore spe regs just to avoid the - * complexity of changing processors. - */ - if ((prev->thread.regs && (prev->thread.regs->msr & MSR_SPE))) - giveup_spe(prev); -#endif /* CONFIG_SPE */ -#endif /* CONFIG_SMP */ - -#ifdef CONFIG_ALTIVEC - /* Avoid the trap. On smp this this never happens since - * we don't set last_task_used_altivec -- Cort - */ - if (new->thread.regs && last_task_used_altivec == new) - new->thread.regs->msr |= MSR_VEC; -#endif -#ifdef CONFIG_SPE - /* Avoid the trap. On smp this this never happens since - * we don't set last_task_used_spe - */ - if (new->thread.regs && last_task_used_spe == new) - new->thread.regs->msr |= MSR_SPE; -#endif /* CONFIG_SPE */ - new_thread = &new->thread; - old_thread = ¤t->thread; - last = _switch(old_thread, new_thread); - local_irq_restore(s); - return last; -} - -void show_regs(struct pt_regs * regs) -{ - int i, trap; - - printk("NIP: %08lX LR: %08lX SP: %08lX REGS: %p TRAP: %04lx %s\n", - regs->nip, regs->link, regs->gpr[1], regs, regs->trap, - print_tainted()); - printk("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", - regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, - regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, - regs->msr&MSR_IR ? 1 : 0, - regs->msr&MSR_DR ? 1 : 0); - trap = TRAP(regs); - if (trap == 0x300 || trap == 0x600) - printk("DAR: %08lX, DSISR: %08lX\n", regs->dar, regs->dsisr); - printk("TASK = %p[%d] '%s' THREAD: %p\n", - current, current->pid, current->comm, current->thread_info); - printk("Last syscall: %ld ", current->thread.last_syscall); - -#ifdef CONFIG_SMP - printk(" CPU: %d", smp_processor_id()); -#endif /* CONFIG_SMP */ - - for (i = 0; i < 32; i++) { - long r; - if ((i % 8) == 0) - printk("\n" KERN_INFO "GPR%02d: ", i); - if (__get_user(r, ®s->gpr[i])) - break; - printk("%08lX ", r); - if (i == 12 && !FULL_REGS(regs)) - break; - } - printk("\n"); -#ifdef CONFIG_KALLSYMS - /* - * Lookup NIP late so we have the best change of getting the - * above info out without failing - */ - printk("NIP [%08lx] ", regs->nip); - print_symbol("%s\n", regs->nip); - printk("LR [%08lx] ", regs->link); - print_symbol("%s\n", regs->link); -#endif - show_stack(current, (unsigned long *) regs->gpr[1]); -} - -void exit_thread(void) -{ - preempt_disable(); - if (last_task_used_math == current) - last_task_used_math = NULL; - if (last_task_used_altivec == current) - last_task_used_altivec = NULL; -#ifdef CONFIG_SPE - if (last_task_used_spe == current) - last_task_used_spe = NULL; -#endif - preempt_enable(); -} - -void flush_thread(void) -{ - preempt_disable(); - if (last_task_used_math == current) - last_task_used_math = NULL; - if (last_task_used_altivec == current) - last_task_used_altivec = NULL; -#ifdef CONFIG_SPE - if (last_task_used_spe == current) - last_task_used_spe = NULL; -#endif - preempt_enable(); -} - -void -release_thread(struct task_struct *t) -{ -} - -/* - * This gets called before we allocate a new thread and copy - * the current task into it. - */ -void prepare_to_copy(struct task_struct *tsk) -{ - struct pt_regs *regs = tsk->thread.regs; - - if (regs == NULL) - return; - preempt_disable(); - if (regs->msr & MSR_FP) - giveup_fpu(current); -#ifdef CONFIG_ALTIVEC - if (regs->msr & MSR_VEC) - giveup_altivec(current); -#endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - if (regs->msr & MSR_SPE) - giveup_spe(current); -#endif /* CONFIG_SPE */ - preempt_enable(); -} - -/* - * Copy a thread.. - */ -int -copy_thread(int nr, unsigned long clone_flags, unsigned long usp, - unsigned long unused, - struct task_struct *p, struct pt_regs *regs) -{ - struct pt_regs *childregs, *kregs; - extern void ret_from_fork(void); - unsigned long sp = (unsigned long)p->thread_info + THREAD_SIZE; - unsigned long childframe; - - CHECK_FULL_REGS(regs); - /* Copy registers */ - sp -= sizeof(struct pt_regs); - childregs = (struct pt_regs *) sp; - *childregs = *regs; - if ((childregs->msr & MSR_PR) == 0) { - /* for kernel thread, set `current' and stackptr in new task */ - childregs->gpr[1] = sp + sizeof(struct pt_regs); - childregs->gpr[2] = (unsigned long) p; - p->thread.regs = NULL; /* no user register state */ - } else { - childregs->gpr[1] = usp; - p->thread.regs = childregs; - if (clone_flags & CLONE_SETTLS) - childregs->gpr[2] = childregs->gpr[6]; - } - childregs->gpr[3] = 0; /* Result from fork() */ - sp -= STACK_FRAME_OVERHEAD; - childframe = sp; - - /* - * The way this works is that at some point in the future - * some task will call _switch to switch to the new task. - * That will pop off the stack frame created below and start - * the new task running at ret_from_fork. The new task will - * do some house keeping and then return from the fork or clone - * system call, using the stack frame created above. - */ - sp -= sizeof(struct pt_regs); - kregs = (struct pt_regs *) sp; - sp -= STACK_FRAME_OVERHEAD; - p->thread.ksp = sp; - kregs->nip = (unsigned long)ret_from_fork; - - p->thread.last_syscall = -1; - - return 0; -} - -/* - * Set up a thread for executing a new program - */ -void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp) -{ - set_fs(USER_DS); - memset(regs->gpr, 0, sizeof(regs->gpr)); - regs->ctr = 0; - regs->link = 0; - regs->xer = 0; - regs->ccr = 0; - regs->mq = 0; - regs->nip = nip; - regs->gpr[1] = sp; - regs->msr = MSR_USER; - preempt_disable(); - if (last_task_used_math == current) - last_task_used_math = NULL; - if (last_task_used_altivec == current) - last_task_used_altivec = NULL; -#ifdef CONFIG_SPE - if (last_task_used_spe == current) - last_task_used_spe = NULL; -#endif - preempt_enable(); - memset(current->thread.fpr, 0, sizeof(current->thread.fpr)); - current->thread.fpscr.val = 0; -#ifdef CONFIG_ALTIVEC - memset(current->thread.vr, 0, sizeof(current->thread.vr)); - memset(¤t->thread.vscr, 0, sizeof(current->thread.vscr)); - current->thread.vrsave = 0; - current->thread.used_vr = 0; -#endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - memset(current->thread.evr, 0, sizeof(current->thread.evr)); - current->thread.acc = 0; - current->thread.spefscr = 0; - current->thread.used_spe = 0; -#endif /* CONFIG_SPE */ -} - -#define PR_FP_ALL_EXCEPT (PR_FP_EXC_DIV | PR_FP_EXC_OVF | PR_FP_EXC_UND \ - | PR_FP_EXC_RES | PR_FP_EXC_INV) - -int set_fpexc_mode(struct task_struct *tsk, unsigned int val) -{ - struct pt_regs *regs = tsk->thread.regs; - - /* This is a bit hairy. If we are an SPE enabled processor - * (have embedded fp) we store the IEEE exception enable flags in - * fpexc_mode. fpexc_mode is also used for setting FP exception - * mode (asyn, precise, disabled) for 'Classic' FP. */ - if (val & PR_FP_EXC_SW_ENABLE) { -#ifdef CONFIG_SPE - tsk->thread.fpexc_mode = val & - (PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT); -#else - return -EINVAL; -#endif - } else { - /* on a CONFIG_SPE this does not hurt us. The bits that - * __pack_fe01 use do not overlap with bits used for - * PR_FP_EXC_SW_ENABLE. Additionally, the MSR[FE0,FE1] bits - * on CONFIG_SPE implementations are reserved so writing to - * them does not change anything */ - if (val > PR_FP_EXC_PRECISE) - return -EINVAL; - tsk->thread.fpexc_mode = __pack_fe01(val); - if (regs != NULL && (regs->msr & MSR_FP) != 0) - regs->msr = (regs->msr & ~(MSR_FE0|MSR_FE1)) - | tsk->thread.fpexc_mode; - } - return 0; -} - -int get_fpexc_mode(struct task_struct *tsk, unsigned long adr) -{ - unsigned int val; - - if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) -#ifdef CONFIG_SPE - val = tsk->thread.fpexc_mode; -#else - return -EINVAL; -#endif - else - val = __unpack_fe01(tsk->thread.fpexc_mode); - return put_user(val, (unsigned int __user *) adr); -} - -int sys_clone(unsigned long clone_flags, unsigned long usp, - int __user *parent_tidp, void __user *child_threadptr, - int __user *child_tidp, int p6, - struct pt_regs *regs) -{ - CHECK_FULL_REGS(regs); - if (usp == 0) - usp = regs->gpr[1]; /* stack pointer for child */ - return do_fork(clone_flags, usp, regs, 0, parent_tidp, child_tidp); -} - -int sys_fork(unsigned long p1, unsigned long p2, unsigned long p3, - unsigned long p4, unsigned long p5, unsigned long p6, - struct pt_regs *regs) -{ - CHECK_FULL_REGS(regs); - return do_fork(SIGCHLD, regs->gpr[1], regs, 0, NULL, NULL); -} - -int sys_vfork(unsigned long p1, unsigned long p2, unsigned long p3, - unsigned long p4, unsigned long p5, unsigned long p6, - struct pt_regs *regs) -{ - CHECK_FULL_REGS(regs); - return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->gpr[1], - regs, 0, NULL, NULL); -} - -int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2, - unsigned long a3, unsigned long a4, unsigned long a5, - struct pt_regs *regs) -{ - int error; - char * filename; - - filename = getname((char __user *) a0); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - preempt_disable(); - if (regs->msr & MSR_FP) - giveup_fpu(current); -#ifdef CONFIG_ALTIVEC - if (regs->msr & MSR_VEC) - giveup_altivec(current); -#endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - if (regs->msr & MSR_SPE) - giveup_spe(current); -#endif /* CONFIG_SPE */ - preempt_enable(); - error = do_execve(filename, (char __user *__user *) a1, - (char __user *__user *) a2, regs); - if (error == 0) { - task_lock(current); - current->ptrace &= ~PT_DTRACE; - task_unlock(current); - } - putname(filename); -out: - return error; -} - -void dump_stack(void) -{ - show_stack(current, NULL); -} - -EXPORT_SYMBOL(dump_stack); - -void show_stack(struct task_struct *tsk, unsigned long *stack) -{ - unsigned long sp, stack_top, prev_sp, ret; - int count = 0; - unsigned long next_exc = 0; - struct pt_regs *regs; - extern char ret_from_except, ret_from_except_full, ret_from_syscall; - - sp = (unsigned long) stack; - if (tsk == NULL) - tsk = current; - if (sp == 0) { - if (tsk == current) - asm("mr %0,1" : "=r" (sp)); - else - sp = tsk->thread.ksp; - } - - prev_sp = (unsigned long) (tsk->thread_info + 1); - stack_top = (unsigned long) tsk->thread_info + THREAD_SIZE; - while (count < 16 && sp > prev_sp && sp < stack_top && (sp & 3) == 0) { - if (count == 0) { - printk("Call trace:"); -#ifdef CONFIG_KALLSYMS - printk("\n"); -#endif - } else { - if (next_exc) { - ret = next_exc; - next_exc = 0; - } else - ret = *(unsigned long *)(sp + 4); - printk(" [%08lx] ", ret); -#ifdef CONFIG_KALLSYMS - print_symbol("%s", ret); - printk("\n"); -#endif - if (ret == (unsigned long) &ret_from_except - || ret == (unsigned long) &ret_from_except_full - || ret == (unsigned long) &ret_from_syscall) { - /* sp + 16 points to an exception frame */ - regs = (struct pt_regs *) (sp + 16); - if (sp + 16 + sizeof(*regs) <= stack_top) - next_exc = regs->nip; - } - } - ++count; - sp = *(unsigned long *)sp; - } -#ifndef CONFIG_KALLSYMS - if (count > 0) - printk("\n"); -#endif -} - -#if 0 -/* - * Low level print for debugging - Cort - */ -int __init ll_printk(const char *fmt, ...) -{ - va_list args; - char buf[256]; - int i; - - va_start(args, fmt); - i=vsprintf(buf,fmt,args); - ll_puts(buf); - va_end(args); - return i; -} - -int lines = 24, cols = 80; -int orig_x = 0, orig_y = 0; - -void puthex(unsigned long val) -{ - unsigned char buf[10]; - int i; - for (i = 7; i >= 0; i--) - { - buf[i] = "0123456789ABCDEF"[val & 0x0F]; - val >>= 4; - } - buf[8] = '\0'; - prom_print(buf); -} - -void __init ll_puts(const char *s) -{ - int x,y; - char *vidmem = (char *)/*(_ISA_MEM_BASE + 0xB8000) */0xD00B8000; - char c; - extern int mem_init_done; - - if ( mem_init_done ) /* assume this means we can printk */ - { - printk(s); - return; - } - -#if 0 - if ( have_of ) - { - prom_print(s); - return; - } -#endif - - /* - * can't ll_puts on chrp without openfirmware yet. - * vidmem just needs to be setup for it. - * -- Cort - */ - if ( _machine != _MACH_prep ) - return; - x = orig_x; - y = orig_y; - - while ( ( c = *s++ ) != '\0' ) { - if ( c == '\n' ) { - x = 0; - if ( ++y >= lines ) { - /*scroll();*/ - /*y--;*/ - y = 0; - } - } else { - vidmem [ ( x + cols * y ) * 2 ] = c; - if ( ++x >= cols ) { - x = 0; - if ( ++y >= lines ) { - /*scroll();*/ - /*y--;*/ - y = 0; - } - } - } - } - - orig_x = x; - orig_y = y; -} -#endif - -unsigned long get_wchan(struct task_struct *p) -{ - unsigned long ip, sp; - unsigned long stack_page = (unsigned long) p->thread_info; - int count = 0; - if (!p || p == current || p->state == TASK_RUNNING) - return 0; - sp = p->thread.ksp; - do { - sp = *(unsigned long *)sp; - if (sp < stack_page || sp >= stack_page + 8188) - return 0; - if (count > 0) { - ip = *(unsigned long *)(sp + 4); - if (!in_sched_functions(ip)) - return ip; - } - } while (count++ < 16); - return 0; -} diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 0eb0b7085e6..e707c6f6e61 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -744,6 +744,9 @@ void __init setup_arch(char **cmdline_p) /* so udelay does something sensible, assume <= 1000 bogomips */ loops_per_jiffy = 500000000 / HZ; + if (ppc_md.init_early) + ppc_md.init_early(); + #ifdef CONFIG_PPC_MULTIPLATFORM /* This could be called "early setup arch", it must be done * now because xmon need it diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c index becbfa39755..e55cdda6149 100644 --- a/arch/ppc/kernel/smp.c +++ b/arch/ppc/kernel/smp.c @@ -318,7 +318,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) p = fork_idle(cpu); if (IS_ERR(p)) panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p)); - p->thread_info->cpu = cpu; + task_thread_info(p)->cpu = cpu; idle_tasks[cpu] = p; } } @@ -369,7 +369,7 @@ int __cpu_up(unsigned int cpu) char buf[32]; int c; - secondary_ti = idle_tasks[cpu]->thread_info; + secondary_ti = task_thread_info(idle_tasks[cpu]); mb(); /* diff --git a/arch/ppc/platforms/4xx/ibm440gx.c b/arch/ppc/platforms/4xx/ibm440gx.c index 956f45e4ef9..d24c09ee7b1 100644 --- a/arch/ppc/platforms/4xx/ibm440gx.c +++ b/arch/ppc/platforms/4xx/ibm440gx.c @@ -58,7 +58,6 @@ static struct ocp_func_emac_data ibm440gx_emac2_def = { .wol_irq = 65, /* WOL interrupt number */ .mdio_idx = -1, /* No shared MDIO */ .tah_idx = 0, /* TAH device index */ - .jumbo = 1, /* Jumbo frames supported */ }; static struct ocp_func_emac_data ibm440gx_emac3_def = { @@ -72,7 +71,6 @@ static struct ocp_func_emac_data ibm440gx_emac3_def = { .wol_irq = 67, /* WOL interrupt number */ .mdio_idx = -1, /* No shared MDIO */ .tah_idx = 1, /* TAH device index */ - .jumbo = 1, /* Jumbo frames supported */ }; OCP_SYSFS_EMAC_DATA() diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c index feb17e41ef6..71a0117d359 100644 --- a/arch/ppc/platforms/4xx/ibm440sp.c +++ b/arch/ppc/platforms/4xx/ibm440sp.c @@ -31,7 +31,6 @@ static struct ocp_func_emac_data ibm440sp_emac0_def = { .wol_irq = 61, /* WOL interrupt number */ .mdio_idx = -1, /* No shared MDIO */ .tah_idx = -1, /* No TAH */ - .jumbo = 1, /* Jumbo frames supported */ }; OCP_SYSFS_EMAC_DATA() diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig index c5bc2821d99..7ddd331a714 100644 --- a/arch/ppc/platforms/85xx/Kconfig +++ b/arch/ppc/platforms/85xx/Kconfig @@ -39,7 +39,7 @@ config MPC8560_ADS config SBC8560 bool "WindRiver PowerQUICC III SBC8560" help - This option enables support for the WindRiver PowerQUICC III + This option enables support for the WindRiver PowerQUICC III SBC8560 board. config STX_GP3 @@ -48,6 +48,26 @@ config STX_GP3 This option enables support for the Silicon Turnkey Express GP3 board. +config TQM8540 + bool "TQ Components TQM8540" + help + This option enablese support for the TQ Components TQM8540 board. + +config TQM8541 + bool "TQ Components TQM8541" + help + This option enablese support for the TQ Components TQM8541 board. + +config TQM8555 + bool "TQ Components TQM8555" + help + This option enablese support for the TQ Components TQM8555 board. + +config TQM8560 + bool "TQ Components TQM8560" + help + This option enablese support for the TQ Components TQM8560 board. + endchoice # It's often necessary to know the specific 85xx processor type. @@ -55,7 +75,7 @@ endchoice # don't need to ask more redundant questions. config MPC8540 bool - depends on MPC8540_ADS + depends on MPC8540_ADS || TQM8540 default y config MPC8548 @@ -65,12 +85,12 @@ config MPC8548 config MPC8555 bool - depends on MPC8555_CDS + depends on MPC8555_CDS || TQM8541 || TQM8555 default y config MPC8560 bool - depends on SBC8560 || MPC8560_ADS || STX_GP3 + depends on SBC8560 || MPC8560_ADS || STX_GP3 || TQM8560 default y config 85xx_PCI2 diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile index efdf813108f..6c4753c144d 100644 --- a/arch/ppc/platforms/85xx/Makefile +++ b/arch/ppc/platforms/85xx/Makefile @@ -7,3 +7,7 @@ obj-$(CONFIG_MPC8555_CDS) += mpc85xx_cds_common.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads_common.o mpc8560_ads.o obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o obj-$(CONFIG_STX_GP3) += stx_gp3.o +obj-$(CONFIG_TQM8540) += tqm85xx.o +obj-$(CONFIG_TQM8541) += tqm85xx.o +obj-$(CONFIG_TQM8555) += tqm85xx.o +obj-$(CONFIG_TQM8560) += tqm85xx.o diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 5e8cc5ec6ab..2959e3c4083 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -351,10 +351,10 @@ mpc85xx_cds_fixup_via(struct pci_controller *hose) void __init mpc85xx_cds_pcibios_fixup(void) { - struct pci_dev *dev = NULL; + struct pci_dev *dev; u_char c; - if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, NULL))) { /* * U-Boot does not set the enable bits @@ -371,21 +371,24 @@ mpc85xx_cds_pcibios_fixup(void) */ dev->irq = 14; pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + pci_dev_put(dev); } /* * Force legacy USB interrupt routing */ - if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, NULL))) { dev->irq = 10; pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); + pci_dev_put(dev); } - if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, dev))) { dev->irq = 11; pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); + pci_dev_put(dev); } } #endif /* CONFIG_PCI */ diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c new file mode 100644 index 00000000000..c6dfd8f0f9d --- /dev/null +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -0,0 +1,419 @@ +/* + * arch/ppc/platforms/85xx/tqm85xx.c + * + * TQM85xx (40/41/55/60) board specific routines + * + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * Based on original work by + * Kumar Gala <galak@kernel.crashing.org> + * Copyright 2004 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/serial.h> +#include <linux/tty.h> /* for linux/serial_core.h */ +#include <linux/serial_core.h> +#include <linux/initrd.h> +#include <linux/module.h> +#include <linux/fsl_devices.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/open_pic.h> +#include <asm/bootinfo.h> +#include <asm/pci-bridge.h> +#include <asm/mpc85xx.h> +#include <asm/irq.h> +#include <asm/immap_85xx.h> +#include <asm/kgdb.h> +#include <asm/ppc_sys.h> +#include <asm/cpm2.h> +#include <mm/mmu_decl.h> + +#include <syslib/ppc85xx_setup.h> +#include <syslib/cpm2_pic.h> +#include <syslib/ppc85xx_common.h> +#include <syslib/ppc85xx_rio.h> + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + + +extern unsigned long total_memory; /* in mm/init */ + +unsigned char __res[sizeof (bd_t)]; + +/* Internal interrupts are all Level Sensitive, and Positive Polarity */ +static u_char tqm85xx_openpic_initsenses[] __initdata = { + MPC85XX_INTERNAL_IRQ_SENSES, + 0x0, /* External 0: */ + 0x0, /* External 1: */ +#if defined(CONFIG_PCI) + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI INTA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI INTB */ +#else + 0x0, /* External 2: */ + 0x0, /* External 3: */ +#endif + 0x0, /* External 4: */ + 0x0, /* External 5: */ + 0x0, /* External 6: */ + 0x0, /* External 7: */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: PHY */ + 0x0, /* External 9: */ + 0x0, /* External 10: */ + 0x0, /* External 11: */ +}; + +static const char *GFAR_PHY_0 = "phy0:2"; +static const char *GFAR_PHY_1 = "phy0:1"; +#ifdef CONFIG_MPC8540 +static const char *GFAR_PHY_3 = "phy0:3"; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init +tqm85xx_setup_arch(void) +{ + bd_t *binfo = (bd_t *) __res; + unsigned int freq; + struct gianfar_platform_data *pdata; + struct gianfar_mdio_data *mdata; + +#ifdef CONFIG_MPC8560 + cpm2_reset(); +#endif + + /* get the core frequency */ + freq = binfo->bi_intfreq; + + if (ppc_md.progress) + ppc_md.progress("tqm85xx_setup_arch()", 0); + + /* Set loops_per_jiffy to a half-way reasonable value, + for use until calibrate_delay gets called. */ + loops_per_jiffy = freq / HZ; + +#ifdef CONFIG_PCI + /* setup PCI host bridges */ + mpc85xx_setup_hose(); +#endif + +#ifndef CONFIG_MPC8560 +#if defined(CONFIG_SERIAL_8250) + mpc85xx_early_serial_map(); +#endif + +#ifdef CONFIG_SERIAL_TEXT_DEBUG + /* Invalidate the entry we stole earlier the serial ports + * should be properly mapped */ + invalidate_tlbcam_entry(num_tlbcam_entries - 1); +#endif +#endif /* CONFIG_MPC8560 */ + + /* setup the board related info for the MDIO bus */ + mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); + + mdata->irq[0] = MPC85xx_IRQ_EXT8; + mdata->irq[1] = MPC85xx_IRQ_EXT8; + mdata->irq[2] = -1; + mdata->irq[3] = MPC85xx_IRQ_EXT8; + mdata->irq[31] = -1; + mdata->paddr += binfo->bi_immr_base; + + /* setup the board related information for the enet controllers */ + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->bus_id = GFAR_PHY_0; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->bus_id = GFAR_PHY_1; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } + +#ifdef CONFIG_MPC8540 + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC); + if (pdata) { + pdata->board_flags = 0; + pdata->bus_id = GFAR_PHY_3; + memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); + } +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +#ifdef CONFIG_MPC8560 +static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs) +{ + while ((irq = cpm2_get_irq(regs)) >= 0) + __do_IRQ(irq, regs); + return IRQ_HANDLED; +} + +static struct irqaction cpm2_irqaction = { + .handler = cpm2_cascade, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "cpm2_cascade", +}; +#endif /* CONFIG_MPC8560 */ + +void __init +tqm85xx_init_IRQ(void) +{ + bd_t *binfo = (bd_t *) __res; + + /* Determine the Physical Address of the OpenPIC regs */ + phys_addr_t OpenPIC_PAddr = + binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; + OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); + OpenPIC_InitSenses = tqm85xx_openpic_initsenses; + OpenPIC_NumInitSenses = sizeof (tqm85xx_openpic_initsenses); + + /* Skip reserved space and internal sources */ + openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); + + /* Map PIC IRQs 0-11 */ + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); + + /* we let openpic interrupts starting from an offset, to + * leave space for cascading interrupts underneath. + */ + openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); + +#ifdef CONFIG_MPC8560 + /* Setup CPM2 PIC */ + cpm2_init_IRQ(); + + setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); +#endif /* CONFIG_MPC8560 */ + + return; +} + +int tqm85xx_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + bd_t *binfo = (bd_t *) __res; + unsigned int freq; + + /* get the core frequency */ + freq = binfo->bi_intfreq; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: TQ Components\n"); + seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name); + seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); + + return 0; +} + +#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337) +extern ulong ds1337_get_rtc_time(void); +extern int ds1337_set_rtc_time(unsigned long nowtime); + +static int __init +tqm85xx_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.set_rtc_time = ds1337_set_rtc_time; + ppc_md.get_rtc_time = ds1337_get_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time)(); + do_settimeofday(&tv); + + return 0; +} +late_initcall(tqm85xx_rtc_hookup); +#endif + +#ifdef CONFIG_PCI +/* + * interrupt routing + */ +int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {PIRQA, PIRQB, 0, 0}, + }; + + const long min_idsel = 0x1c, max_idsel = 0x1c, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +int mpc85xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_RAPIDIO +void platform_rio_init(void) +{ + /* 512MB RIO LAW at 0xc0000000 */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ + +/* ************************************************************************ */ +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + /* parse_bootinfo must always be called first */ + parse_bootinfo(find_bootinfo()); + + /* + * If we were passed in a board information, copy it into the + * residual data area. + */ + if (r3) { + memcpy((void *) __res, (void *) (r3 + KERNELBASE), + sizeof (bd_t)); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) && !defined(CONFIG_MPC8560) + { + bd_t *binfo = (bd_t *) __res; + struct uart_port p; + + /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ + settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, + binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); + + memset(&p, 0, sizeof (p)); + p.iotype = SERIAL_IO_MEM; + p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; + p.uartclk = binfo->bi_busfreq; + + gen550_init(0, &p); + + memset(&p, 0, sizeof (p)); + p.iotype = SERIAL_IO_MEM; + p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; + p.uartclk = binfo->bi_busfreq; + + gen550_init(1, &p); + } +#endif + +#if defined(CONFIG_BLK_DEV_INITRD) + /* + * If the init RAM disk has been configured in, and there's a valid + * starting address for it, set it up. + */ + if (r4) { + initrd_start = r4 + KERNELBASE; + initrd_end = r5 + KERNELBASE; + } +#endif /* CONFIG_BLK_DEV_INITRD */ + + /* Copy the kernel command line arguments to a safe place. */ + + if (r6) { + *(char *) (r7 + KERNELBASE) = 0; + strcpy(cmd_line, (char *) (r6 + KERNELBASE)); + } + + identify_ppc_sys_by_id(mfspr(SPRN_SVR)); + + /* setup the PowerPC module struct */ + ppc_md.setup_arch = tqm85xx_setup_arch; + ppc_md.show_cpuinfo = tqm85xx_show_cpuinfo; + + ppc_md.init_IRQ = tqm85xx_init_IRQ; + ppc_md.get_irq = openpic_get_irq; + + ppc_md.restart = mpc85xx_restart; + ppc_md.power_off = mpc85xx_power_off; + ppc_md.halt = mpc85xx_halt; + + ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; + + ppc_md.time_init = NULL; + ppc_md.set_rtc_time = NULL; + ppc_md.get_rtc_time = NULL; + ppc_md.calibrate_decr = mpc85xx_calibrate_decr; + +#ifndef CONFIG_MPC8560 +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) + ppc_md.progress = gen550_progress; +#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ +#endif /* CONFIG_MPC8560 */ + + if (ppc_md.progress) + ppc_md.progress("tqm85xx_init(): exit", 0); + + return; +} diff --git a/arch/ppc/platforms/85xx/tqm85xx.h b/arch/ppc/platforms/85xx/tqm85xx.h new file mode 100644 index 00000000000..3775eb363fd --- /dev/null +++ b/arch/ppc/platforms/85xx/tqm85xx.h @@ -0,0 +1,56 @@ +/* + * arch/ppc/platforms/85xx/tqm85xx.h + * + * TQM85xx (40/41/55/60) board definitions + * + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_TQM85XX_H +#define __MACH_TQM85XX_H + +#include <linux/config.h> +#include <linux/init.h> +#include <asm/ppcboot.h> + +#define BOARD_CCSRBAR ((uint)0xe0000000) +#define CCSRBAR_SIZE ((uint)1024*1024) + +#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) + +#define PCI_CFG_ADDR_OFFSET (0x8000) +#define PCI_CFG_DATA_OFFSET (0x8004) + +/* PCI interrupt controller */ +#define PIRQA MPC85xx_IRQ_EXT2 +#define PIRQB MPC85xx_IRQ_EXT3 + +#define MPC85XX_PCI1_LOWER_IO 0x00000000 +#define MPC85XX_PCI1_UPPER_IO 0x00ffffff + +#define MPC85XX_PCI1_LOWER_MEM 0x80000000 +#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff + +#define MPC85XX_PCI1_IO_BASE 0xe2000000 +#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 + +#define MPC85XX_PCI1_IO_SIZE 0x01000000 + +#define BASE_BAUD 115200 + +extern void mpc85xx_setup_hose(void) __init; +extern void mpc85xx_restart(char *cmd); +extern void mpc85xx_power_off(void); +extern void mpc85xx_halt(void); +extern void mpc85xx_init_IRQ(void) __init; +extern unsigned long mpc85xx_find_end_of_memory(void) __init; +extern void mpc85xx_calibrate_decr(void) __init; + +#endif /* __MACH_TQM85XX_H */ diff --git a/arch/ppc/platforms/apus_setup.c b/arch/ppc/platforms/apus_setup.c index 2f74fde98eb..c42c50073da 100644 --- a/arch/ppc/platforms/apus_setup.c +++ b/arch/ppc/platforms/apus_setup.c @@ -55,9 +55,6 @@ int (*mach_hwclk) (int, struct hwclk_time*) = NULL; int (*mach_set_clock_mmss) (unsigned long) = NULL; void (*mach_reset)( void ); long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */ -#if defined(CONFIG_AMIGA_FLOPPY) -void (*mach_floppy_setup) (char *, int *) __initdata = NULL; -#endif #ifdef CONFIG_HEARTBEAT void (*mach_heartbeat) (int) = NULL; extern void apus_heartbeat (void); @@ -76,7 +73,6 @@ struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */ struct mem_info ramdisk; -extern void amiga_floppy_setup(char *, int *); extern void config_amiga(void); static int __60nsram = 0; @@ -305,16 +301,6 @@ void kbd_reset_setup(char *str, int *ints) { } -/*********************************************************** FLOPPY */ -#if defined(CONFIG_AMIGA_FLOPPY) -__init -void floppy_setup(char *str, int *ints) -{ - if (mach_floppy_setup) - mach_floppy_setup (str, ints); -} -#endif - /*********************************************************** MEMORY */ #define KMAP_MAX 32 unsigned long kmap_chunks[KMAP_MAX*3]; @@ -574,9 +560,9 @@ static __inline__ void ser_RTSon(void) int __debug_ser_out( unsigned char c ) { - custom.serdat = c | 0x100; + amiga_custom.serdat = c | 0x100; mb(); - while (!(custom.serdatr & 0x2000)) + while (!(amiga_custom.serdatr & 0x2000)) barrier(); return 1; } @@ -586,11 +572,11 @@ unsigned char __debug_ser_in( void ) unsigned char c; /* XXX: is that ok?? derived from amiga_ser.c... */ - while( !(custom.intreqr & IF_RBF) ) + while( !(amiga_custom.intreqr & IF_RBF) ) barrier(); - c = custom.serdatr; + c = amiga_custom.serdatr; /* clear the interrupt, so that another character can be read */ - custom.intreq = IF_RBF; + amiga_custom.intreq = IF_RBF; return c; } @@ -601,10 +587,10 @@ int __debug_serinit( void ) local_irq_save(flags); /* turn off Rx and Tx interrupts */ - custom.intena = IF_RBF | IF_TBE; + amiga_custom.intena = IF_RBF | IF_TBE; /* clear any pending interrupt */ - custom.intreq = IF_RBF | IF_TBE; + amiga_custom.intreq = IF_RBF | IF_TBE; local_irq_restore(flags); @@ -617,7 +603,7 @@ int __debug_serinit( void ) #ifdef CONFIG_KGDB /* turn Rx interrupts on for GDB */ - custom.intena = IF_SETCLR | IF_RBF; + amiga_custom.intena = IF_SETCLR | IF_RBF; ser_RTSon(); #endif diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c index f1b70ab3c6f..056ac2a7b5c 100644 --- a/arch/ppc/platforms/chrp_setup.c +++ b/arch/ppc/platforms/chrp_setup.c @@ -404,7 +404,6 @@ static struct irqaction xmon_irqaction = { void __init chrp_init_IRQ(void) { struct device_node *np; - int i; unsigned long chrp_int_ack = 0; unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c index d44cc991179..7ed52dc340c 100644 --- a/arch/ppc/platforms/lite5200.c +++ b/arch/ppc/platforms/lite5200.c @@ -196,8 +196,10 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, mpc52xx_set_bat(); /* No ISA bus by default */ +#ifdef CONFIG_PCI isa_io_base = 0; isa_mem_base = 0; +#endif /* Powersave */ /* This is provided as an example on how to do it. But you diff --git a/arch/ppc/platforms/mpc5200.c b/arch/ppc/platforms/mpc5200.c deleted file mode 100644 index a58db438c16..00000000000 --- a/arch/ppc/platforms/mpc5200.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/ppc/platforms/mpc5200.c - * - * OCP Definitions for the boards based on MPC5200 processor. Contains - * definitions for every common peripherals. (Mostly all but PSCs) - * - * Maintainer : Sylvain Munaut <tnt@246tNt.com> - * - * Copyright 2004 Sylvain Munaut <tnt@246tNt.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include <asm/ocp.h> -#include <asm/mpc52xx.h> - - -static struct ocp_fs_i2c_data mpc5200_i2c_def = { - .flags = FS_I2C_CLOCK_5200, -}; - - -/* Here is the core_ocp struct. - * With all the devices common to all board. Even if port multiplexing is - * not setup for them (if the user don't want them, just don't select the - * config option). The potentially conflicting devices (like PSCs) goes in - * board specific file. - */ -struct ocp_def core_ocp[] = { - { - .vendor = OCP_VENDOR_FREESCALE, - .function = OCP_FUNC_IIC, - .index = 0, - .paddr = MPC52xx_I2C1, - .irq = OCP_IRQ_NA, /* MPC52xx_IRQ_I2C1 - Buggy */ - .pm = OCP_CPM_NA, - .additions = &mpc5200_i2c_def, - }, - { - .vendor = OCP_VENDOR_FREESCALE, - .function = OCP_FUNC_IIC, - .index = 1, - .paddr = MPC52xx_I2C2, - .irq = OCP_IRQ_NA, /* MPC52xx_IRQ_I2C2 - Buggy */ - .pm = OCP_CPM_NA, - .additions = &mpc5200_i2c_def, - }, - { /* Terminating entry */ - .vendor = OCP_VENDOR_INVALID - } -}; diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index 4415748071d..d0653580200 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -72,7 +72,6 @@ TODC_ALLOC(); -unsigned char ucSystemType; unsigned char ucBoardRev; unsigned char ucBoardRevMaj, ucBoardRevMin; @@ -954,7 +953,6 @@ prep_calibrate_decr(void) static void __init prep_init_IRQ(void) { - int i; unsigned int pci_viddid, pci_did; if (OpenPIC_Addr != NULL) { diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 5b7f2b80e56..84ef03018d0 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -96,7 +96,7 @@ ifeq ($(CONFIG_85xx),y) obj-$(CONFIG_PCI) += pci_auto.o endif obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o -obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \ +obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \ mpc83xx_sys.o mpc83xx_devices.o ifeq ($(CONFIG_83xx),y) obj-$(CONFIG_PCI) += pci_auto.o diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c deleted file mode 100644 index 8f01e0f1d84..00000000000 --- a/arch/ppc/syslib/ipic.c +++ /dev/null @@ -1,646 +0,0 @@ -/* - * include/asm-ppc/ipic.c - * - * IPIC routines implementations. - * - * Copyright 2005 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/slab.h> -#include <linux/stddef.h> -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/sysdev.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/ipic.h> -#include <asm/mpc83xx.h> - -#include "ipic.h" - -static struct ipic p_ipic; -static struct ipic * primary_ipic; - -static struct ipic_info ipic_info[] = { - [9] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 24, - .prio_mask = 0, - }, - [10] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 25, - .prio_mask = 1, - }, - [11] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 26, - .prio_mask = 2, - }, - [14] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 29, - .prio_mask = 5, - }, - [15] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 30, - .prio_mask = 6, - }, - [16] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 31, - .prio_mask = 7, - }, - [17] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_A, - .force = IPIC_SEFCR, - .bit = 1, - .prio_mask = 5, - }, - [18] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_A, - .force = IPIC_SEFCR, - .bit = 2, - .prio_mask = 6, - }, - [19] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_A, - .force = IPIC_SEFCR, - .bit = 3, - .prio_mask = 7, - }, - [20] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_B, - .force = IPIC_SEFCR, - .bit = 4, - .prio_mask = 4, - }, - [21] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_B, - .force = IPIC_SEFCR, - .bit = 5, - .prio_mask = 5, - }, - [22] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_B, - .force = IPIC_SEFCR, - .bit = 6, - .prio_mask = 6, - }, - [23] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_B, - .force = IPIC_SEFCR, - .bit = 7, - .prio_mask = 7, - }, - [32] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 0, - .prio_mask = 0, - }, - [33] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 1, - .prio_mask = 1, - }, - [34] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 2, - .prio_mask = 2, - }, - [35] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 3, - .prio_mask = 3, - }, - [36] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 4, - .prio_mask = 4, - }, - [37] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 5, - .prio_mask = 5, - }, - [38] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 6, - .prio_mask = 6, - }, - [39] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 7, - .prio_mask = 7, - }, - [48] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_A, - .force = IPIC_SEFCR, - .bit = 0, - .prio_mask = 4, - }, - [64] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_A, - .force = IPIC_SIFCR_L, - .bit = 0, - .prio_mask = 0, - }, - [65] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_A, - .force = IPIC_SIFCR_L, - .bit = 1, - .prio_mask = 1, - }, - [66] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_A, - .force = IPIC_SIFCR_L, - .bit = 2, - .prio_mask = 2, - }, - [67] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_A, - .force = IPIC_SIFCR_L, - .bit = 3, - .prio_mask = 3, - }, - [68] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_B, - .force = IPIC_SIFCR_L, - .bit = 4, - .prio_mask = 0, - }, - [69] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_B, - .force = IPIC_SIFCR_L, - .bit = 5, - .prio_mask = 1, - }, - [70] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_B, - .force = IPIC_SIFCR_L, - .bit = 6, - .prio_mask = 2, - }, - [71] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_B, - .force = IPIC_SIFCR_L, - .bit = 7, - .prio_mask = 3, - }, - [72] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 8, - }, - [73] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 9, - }, - [74] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 10, - }, - [75] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 11, - }, - [76] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 12, - }, - [77] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 13, - }, - [78] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 14, - }, - [79] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 15, - }, - [80] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 16, - }, - [84] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 20, - }, - [85] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 21, - }, - [90] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 26, - }, - [91] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 27, - }, -}; - -static inline u32 ipic_read(volatile u32 __iomem *base, unsigned int reg) -{ - return in_be32(base + (reg >> 2)); -} - -static inline void ipic_write(volatile u32 __iomem *base, unsigned int reg, u32 value) -{ - out_be32(base + (reg >> 2), value); -} - -static inline struct ipic * ipic_from_irq(unsigned int irq) -{ - return primary_ipic; -} - -static void ipic_enable_irq(unsigned int irq) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - temp = ipic_read(ipic->regs, ipic_info[src].mask); - temp |= (1 << (31 - ipic_info[src].bit)); - ipic_write(ipic->regs, ipic_info[src].mask, temp); -} - -static void ipic_disable_irq(unsigned int irq) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - temp = ipic_read(ipic->regs, ipic_info[src].mask); - temp &= ~(1 << (31 - ipic_info[src].bit)); - ipic_write(ipic->regs, ipic_info[src].mask, temp); -} - -static void ipic_disable_irq_and_ack(unsigned int irq) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - ipic_disable_irq(irq); - - temp = ipic_read(ipic->regs, ipic_info[src].pend); - temp |= (1 << (31 - ipic_info[src].bit)); - ipic_write(ipic->regs, ipic_info[src].pend, temp); -} - -static void ipic_end_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - ipic_enable_irq(irq); -} - -struct hw_interrupt_type ipic = { - .typename = " IPIC ", - .enable = ipic_enable_irq, - .disable = ipic_disable_irq, - .ack = ipic_disable_irq_and_ack, - .end = ipic_end_irq, -}; - -void __init ipic_init(phys_addr_t phys_addr, - unsigned int flags, - unsigned int irq_offset, - unsigned char *senses, - unsigned int senses_count) -{ - u32 i, temp = 0; - - primary_ipic = &p_ipic; - primary_ipic->regs = ioremap(phys_addr, MPC83xx_IPIC_SIZE); - - primary_ipic->irq_offset = irq_offset; - - ipic_write(primary_ipic->regs, IPIC_SICNR, 0x0); - - /* default priority scheme is grouped. If spread mode is required - * configure SICFR accordingly */ - if (flags & IPIC_SPREADMODE_GRP_A) - temp |= SICFR_IPSA; - if (flags & IPIC_SPREADMODE_GRP_D) - temp |= SICFR_IPSD; - if (flags & IPIC_SPREADMODE_MIX_A) - temp |= SICFR_MPSA; - if (flags & IPIC_SPREADMODE_MIX_B) - temp |= SICFR_MPSB; - - ipic_write(primary_ipic->regs, IPIC_SICNR, temp); - - /* handle MCP route */ - temp = 0; - if (flags & IPIC_DISABLE_MCP_OUT) - temp = SERCR_MCPR; - ipic_write(primary_ipic->regs, IPIC_SERCR, temp); - - /* handle routing of IRQ0 to MCP */ - temp = ipic_read(primary_ipic->regs, IPIC_SEMSR); - - if (flags & IPIC_IRQ0_MCP) - temp |= SEMSR_SIRQ0; - else - temp &= ~SEMSR_SIRQ0; - - ipic_write(primary_ipic->regs, IPIC_SEMSR, temp); - - for (i = 0 ; i < NR_IPIC_INTS ; i++) { - irq_desc[i+irq_offset].handler = &ipic; - irq_desc[i+irq_offset].status = IRQ_LEVEL; - } - - temp = 0; - for (i = 0 ; i < senses_count ; i++) { - if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) { - temp |= 1 << (15 - i); - if (i != 0) - irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0; - else - irq_desc[irq_offset + MPC83xx_IRQ_EXT0].status = 0; - } - } - ipic_write(primary_ipic->regs, IPIC_SECNR, temp); - - printk ("IPIC (%d IRQ sources, %d External IRQs) at %p\n", NR_IPIC_INTS, - senses_count, primary_ipic->regs); -} - -int ipic_set_priority(unsigned int irq, unsigned int priority) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - if (priority > 7) - return -EINVAL; - if (src > 127) - return -EINVAL; - if (ipic_info[src].prio == 0) - return -EINVAL; - - temp = ipic_read(ipic->regs, ipic_info[src].prio); - - if (priority < 4) { - temp &= ~(0x7 << (20 + (3 - priority) * 3)); - temp |= ipic_info[src].prio_mask << (20 + (3 - priority) * 3); - } else { - temp &= ~(0x7 << (4 + (7 - priority) * 3)); - temp |= ipic_info[src].prio_mask << (4 + (7 - priority) * 3); - } - - ipic_write(ipic->regs, ipic_info[src].prio, temp); - - return 0; -} - -void ipic_set_highest_priority(unsigned int irq) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - temp = ipic_read(ipic->regs, IPIC_SICFR); - - /* clear and set HPI */ - temp &= 0x7f000000; - temp |= (src & 0x7f) << 24; - - ipic_write(ipic->regs, IPIC_SICFR, temp); -} - -void ipic_set_default_priority(void) -{ - ipic_set_priority(MPC83xx_IRQ_TSEC1_TX, 0); - ipic_set_priority(MPC83xx_IRQ_TSEC1_RX, 1); - ipic_set_priority(MPC83xx_IRQ_TSEC1_ERROR, 2); - ipic_set_priority(MPC83xx_IRQ_TSEC2_TX, 3); - ipic_set_priority(MPC83xx_IRQ_TSEC2_RX, 4); - ipic_set_priority(MPC83xx_IRQ_TSEC2_ERROR, 5); - ipic_set_priority(MPC83xx_IRQ_USB2_DR, 6); - ipic_set_priority(MPC83xx_IRQ_USB2_MPH, 7); - - ipic_set_priority(MPC83xx_IRQ_UART1, 0); - ipic_set_priority(MPC83xx_IRQ_UART2, 1); - ipic_set_priority(MPC83xx_IRQ_SEC2, 2); - ipic_set_priority(MPC83xx_IRQ_IIC1, 5); - ipic_set_priority(MPC83xx_IRQ_IIC2, 6); - ipic_set_priority(MPC83xx_IRQ_SPI, 7); - ipic_set_priority(MPC83xx_IRQ_RTC_SEC, 0); - ipic_set_priority(MPC83xx_IRQ_PIT, 1); - ipic_set_priority(MPC83xx_IRQ_PCI1, 2); - ipic_set_priority(MPC83xx_IRQ_PCI2, 3); - ipic_set_priority(MPC83xx_IRQ_EXT0, 4); - ipic_set_priority(MPC83xx_IRQ_EXT1, 5); - ipic_set_priority(MPC83xx_IRQ_EXT2, 6); - ipic_set_priority(MPC83xx_IRQ_EXT3, 7); - ipic_set_priority(MPC83xx_IRQ_RTC_ALR, 0); - ipic_set_priority(MPC83xx_IRQ_MU, 1); - ipic_set_priority(MPC83xx_IRQ_SBA, 2); - ipic_set_priority(MPC83xx_IRQ_DMA, 3); - ipic_set_priority(MPC83xx_IRQ_EXT4, 4); - ipic_set_priority(MPC83xx_IRQ_EXT5, 5); - ipic_set_priority(MPC83xx_IRQ_EXT6, 6); - ipic_set_priority(MPC83xx_IRQ_EXT7, 7); -} - -void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq) -{ - struct ipic *ipic = primary_ipic; - u32 temp; - - temp = ipic_read(ipic->regs, IPIC_SERMR); - temp |= (1 << (31 - mcp_irq)); - ipic_write(ipic->regs, IPIC_SERMR, temp); -} - -void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq) -{ - struct ipic *ipic = primary_ipic; - u32 temp; - - temp = ipic_read(ipic->regs, IPIC_SERMR); - temp &= (1 << (31 - mcp_irq)); - ipic_write(ipic->regs, IPIC_SERMR, temp); -} - -u32 ipic_get_mcp_status(void) -{ - return ipic_read(primary_ipic->regs, IPIC_SERMR); -} - -void ipic_clear_mcp_status(u32 mask) -{ - ipic_write(primary_ipic->regs, IPIC_SERMR, mask); -} - -/* Return an interrupt vector or -1 if no interrupt is pending. */ -int ipic_get_irq(struct pt_regs *regs) -{ - int irq; - - irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & 0x7f; - - if (irq == 0) /* 0 --> no irq is pending */ - irq = -1; - - return irq; -} - -static struct sysdev_class ipic_sysclass = { - set_kset_name("ipic"), -}; - -static struct sys_device device_ipic = { - .id = 0, - .cls = &ipic_sysclass, -}; - -static int __init init_ipic_sysfs(void) -{ - int rc; - - if (!primary_ipic->regs) - return -ENODEV; - printk(KERN_DEBUG "Registering ipic with sysfs...\n"); - - rc = sysdev_class_register(&ipic_sysclass); - if (rc) { - printk(KERN_ERR "Failed registering ipic sys class\n"); - return -ENODEV; - } - rc = sysdev_register(&device_ipic); - if (rc) { - printk(KERN_ERR "Failed registering ipic sys device\n"); - return -ENODEV; - } - return 0; -} - -subsys_initcall(init_ipic_sysfs); diff --git a/arch/ppc/syslib/ipic.h b/arch/ppc/syslib/ipic.h deleted file mode 100644 index a7ce7da8785..00000000000 --- a/arch/ppc/syslib/ipic.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/ppc/kernel/ipic.h - * - * IPIC private definitions and structure. - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __IPIC_H__ -#define __IPIC_H__ - -#include <asm/ipic.h> - -#define MPC83xx_IPIC_SIZE (0x00100) - -/* System Global Interrupt Configuration Register */ -#define SICFR_IPSA 0x00010000 -#define SICFR_IPSD 0x00080000 -#define SICFR_MPSA 0x00200000 -#define SICFR_MPSB 0x00400000 - -/* System External Interrupt Mask Register */ -#define SEMSR_SIRQ0 0x00008000 - -/* System Error Control Register */ -#define SERCR_MCPR 0x00000001 - -struct ipic { - volatile u32 __iomem *regs; - unsigned int irq_offset; -}; - -struct ipic_info { - u8 pend; /* pending register offset from base */ - u8 mask; /* mask register offset from base */ - u8 prio; /* priority register offset from base */ - u8 force; /* force register offset from base */ - u8 bit; /* register bit position (as per doc) - bit mask = 1 << (31 - bit) */ - u8 prio_mask; /* priority mask value */ -}; - -#endif /* __IPIC_H__ */ diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 1cc3abe6fa4..688616de3cd 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -135,6 +135,16 @@ static struct irqaction tbint_irqaction = { .name = "tbint", }; +/* per-board overridable init_internal_rtc() function. */ +void __init __attribute__ ((weak)) +init_internal_rtc(void) +{ + /* Disable the RTC one second and alarm interrupts. */ + out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE)); + /* Enable the RTC */ + out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE)); +} + /* The decrementer counts at the system (internal) clock frequency divided by * sixteen, or external oscillator divided by four. We force the processor * to use system clock divided by sixteen. @@ -183,10 +193,7 @@ void __init m8xx_calibrate_decr(void) out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY); out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY); - /* Disable the RTC one second and alarm interrupts. */ - out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE)); - /* Enable the RTC */ - out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE)); + init_internal_rtc(); /* Enabling the decrementer also enables the timebase interrupts * (or from the other point of view, to get decrementer interrupts diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c index a21632d37e5..df6c9557b86 100644 --- a/arch/ppc/syslib/m8xx_wdt.c +++ b/arch/ppc/syslib/m8xx_wdt.c @@ -19,6 +19,7 @@ #include <syslib/m8xx_wdt.h> static int wdt_timeout; +int m8xx_has_internal_rtc = 0; static irqreturn_t m8xx_wdt_interrupt(int, void *, struct pt_regs *); static struct irqaction m8xx_wdt_irqaction = { @@ -45,35 +46,15 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) return IRQ_HANDLED; } -void __init m8xx_wdt_handler_install(bd_t * binfo) +#define SYPCR_SWP 0x1 +#define SYPCR_SWE 0x4 + + +void __init m8xx_wdt_install_irq(volatile immap_t *imap, bd_t *binfo) { - volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; u32 pitc; - u32 sypcr; u32 pitrtclk; - sypcr = in_be32(&imap->im_siu_conf.sc_sypcr); - - if (!(sypcr & 0x04)) { - printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n", - sypcr); - return; - } - - m8xx_wdt_reset(); - - printk(KERN_NOTICE - "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n", - (sypcr >> 16), sypcr & 0x01); - - wdt_timeout = (sypcr >> 16) & 0xFFFF; - - if (!wdt_timeout) - wdt_timeout = 0xFFFF; - - if (sypcr & 0x01) - wdt_timeout *= 2048; - /* * Fire trigger if half of the wdt ticked down */ @@ -98,6 +79,67 @@ void __init m8xx_wdt_handler_install(bd_t * binfo) printk(KERN_NOTICE "m8xx_wdt: keep-alive trigger installed (PITC: 0x%04X)\n", pitc); +} + +static void m8xx_wdt_timer_func(unsigned long data); + +static struct timer_list m8xx_wdt_timer = + TIMER_INITIALIZER(m8xx_wdt_timer_func, 0, 0); + +void m8xx_wdt_stop_timer(void) +{ + del_timer(&m8xx_wdt_timer); +} + +void m8xx_wdt_install_timer(void) +{ + m8xx_wdt_timer.expires = jiffies + (HZ/2); + add_timer(&m8xx_wdt_timer); +} + +static void m8xx_wdt_timer_func(unsigned long data) +{ + m8xx_wdt_reset(); + m8xx_wdt_install_timer(); +} + +void __init m8xx_wdt_handler_install(bd_t * binfo) +{ + volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR; + u32 sypcr; + + sypcr = in_be32(&imap->im_siu_conf.sc_sypcr); + + if (!(sypcr & SYPCR_SWE)) { + printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n", + sypcr); + return; + } + + m8xx_wdt_reset(); + + printk(KERN_NOTICE + "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n", + (sypcr >> 16), sypcr & SYPCR_SWP); + + wdt_timeout = (sypcr >> 16) & 0xFFFF; + + if (!wdt_timeout) + wdt_timeout = 0xFFFF; + + if (sypcr & SYPCR_SWP) + wdt_timeout *= 2048; + + m8xx_has_internal_rtc = in_be16(&imap->im_sit.sit_rtcsc) & RTCSC_RTE; + + /* if the internal RTC is off use a kernel timer */ + if (!m8xx_has_internal_rtc) { + if (wdt_timeout < (binfo->bi_intfreq/HZ)) + printk(KERN_ERR "m8xx_wdt: timeout too short for ktimer!\n"); + m8xx_wdt_install_timer(); + } else + m8xx_wdt_install_irq(imap, binfo); + wdt_timeout /= binfo->bi_intfreq; } diff --git a/arch/ppc/syslib/m8xx_wdt.h b/arch/ppc/syslib/m8xx_wdt.h index 0d81a9f8155..e75835f0012 100644 --- a/arch/ppc/syslib/m8xx_wdt.h +++ b/arch/ppc/syslib/m8xx_wdt.h @@ -9,8 +9,12 @@ #ifndef _PPC_SYSLIB_M8XX_WDT_H #define _PPC_SYSLIB_M8XX_WDT_H +extern int m8xx_has_internal_rtc; + extern void m8xx_wdt_handler_install(bd_t * binfo); extern int m8xx_wdt_get_timeout(void); extern void m8xx_wdt_reset(void); +extern void m8xx_wdt_install_timer(void); +extern void m8xx_wdt_stop_timer(void); #endif /* _PPC_SYSLIB_M8XX_WDT_H */ diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c index 4ac19080eb8..313c96ec7eb 100644 --- a/arch/ppc/syslib/mpc52xx_pci.c +++ b/arch/ppc/syslib/mpc52xx_pci.c @@ -24,6 +24,12 @@ #include <asm/machdep.h> +/* This macro is defined to activate the workaround for the bug + 435 of the MPC5200 (L25R). With it activated, we don't do any + 32 bits configuration access during type-1 cycles */ +#define MPC5200_BUG_435_WORKAROUND + + static int mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) @@ -40,17 +46,39 @@ mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, ((bus->number - hose->bus_offset) << 16) | (devfn << 8) | (offset & 0xfc)); + mb(); + +#ifdef MPC5200_BUG_435_WORKAROUND + if (bus->number != hose->bus_offset) { + switch (len) { + case 1: + value = in_8(((u8 __iomem *)hose->cfg_data) + (offset & 3)); + break; + case 2: + value = in_le16(((u16 __iomem *)hose->cfg_data) + ((offset>>1) & 1)); + break; + + default: + value = in_le16((u16 __iomem *)hose->cfg_data) | + (in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16); + break; + } + } + else +#endif + { + value = in_le32(hose->cfg_data); - value = in_le32(hose->cfg_data); - - if (len != 4) { - value >>= ((offset & 0x3) << 3); - value &= 0xffffffff >> (32 - (len << 3)); + if (len != 4) { + value >>= ((offset & 0x3) << 3); + value &= 0xffffffff >> (32 - (len << 3)); + } } *val = value; out_be32(hose->cfg_addr, 0); + mb(); return PCIBIOS_SUCCESSFUL; } @@ -71,21 +99,48 @@ mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, ((bus->number - hose->bus_offset) << 16) | (devfn << 8) | (offset & 0xfc)); + mb(); + +#ifdef MPC5200_BUG_435_WORKAROUND + if (bus->number != hose->bus_offset) { + switch (len) { + case 1: + out_8(((u8 __iomem *)hose->cfg_data) + + (offset & 3), val); + break; + case 2: + out_le16(((u16 __iomem *)hose->cfg_data) + + ((offset>>1) & 1), val); + break; + + default: + out_le16((u16 __iomem *)hose->cfg_data, + (u16)val); + out_le16(((u16 __iomem *)hose->cfg_data) + 1, + (u16)(val>>16)); + break; + } + } + else +#endif + { + if (len != 4) { + value = in_le32(hose->cfg_data); - if (len != 4) { - value = in_le32(hose->cfg_data); + offset = (offset & 0x3) << 3; + mask = (0xffffffff >> (32 - (len << 3))); + mask <<= offset; - offset = (offset & 0x3) << 3; - mask = (0xffffffff >> (32 - (len << 3))); - mask <<= offset; + value &= ~mask; + val = value | ((val << offset) & mask); + } - value &= ~mask; - val = value | ((val << offset) & mask); + out_le32(hose->cfg_data, val); } - - out_le32(hose->cfg_data, val); + mb(); out_be32(hose->cfg_addr, 0); + mb(); return PCIBIOS_SUCCESSFUL; } @@ -99,9 +154,12 @@ static struct pci_ops mpc52xx_pci_ops = { static void __init mpc52xx_pci_setup(struct mpc52xx_pci __iomem *pci_regs) { + u32 tmp; /* Setup control regs */ - /* Nothing to do afaik */ + tmp = in_be32(&pci_regs->scr); + tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + out_be32(&pci_regs->scr, tmp); /* Setup windows */ out_be32(&pci_regs->iw0btar, MPC52xx_PCI_IWBTAR_TRANSLATION( @@ -142,16 +200,15 @@ mpc52xx_pci_setup(struct mpc52xx_pci __iomem *pci_regs) /* Not necessary and can be a bad thing if for example the bootloader is displaying a splash screen or ... Just left here for documentation purpose if anyone need it */ -#if 0 - u32 tmp; tmp = in_be32(&pci_regs->gscr); +#if 0 out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR); udelay(50); - out_be32(&pci_regs->gscr, tmp); #endif + out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR); } -static void __init +static void mpc52xx_pci_fixup_resources(struct pci_dev *dev) { int i; diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c index bb2374585a7..a4a4b02227d 100644 --- a/arch/ppc/syslib/mpc52xx_setup.c +++ b/arch/ppc/syslib/mpc52xx_setup.c @@ -84,9 +84,11 @@ mpc52xx_set_bat(void) void __init mpc52xx_map_io(void) { - /* Here we only map the MBAR */ + /* Here we map the MBAR and the whole upper zone. MBAR is only + 64k but we can't map only 64k with BATs. Map the whole + 0xf0000000 range is ok and helps eventual lpb devices placed there */ io_block_mapping( - MPC52xx_MBAR_VIRT, MPC52xx_MBAR, MPC52xx_MBAR_SIZE, _PAGE_IO); + MPC52xx_MBAR_VIRT, MPC52xx_MBAR, 0x10000000, _PAGE_IO); } diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c index 2b483b4f160..9075a7538e2 100644 --- a/arch/ppc/xmon/xmon.c +++ b/arch/ppc/xmon/xmon.c @@ -99,7 +99,7 @@ static void remove_bpts(void); static void insert_bpts(void); static struct bpt *at_breakpoint(unsigned pc); static void bpt_cmds(void); -static void cacheflush(void); +void cacheflush(void); #ifdef CONFIG_SMP static void cpu_cmd(void); #endif /* CONFIG_SMP */ |