diff options
Diffstat (limited to 'arch/ppc')
327 files changed, 3700 insertions, 17376 deletions
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index 8ace2a1f3b4..98b25fa0049 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -1,6 +1,4 @@ /* - * arch/ppc/4xx_io/serial_sicc.c - * * Driver for IBM STB3xxx SICC serial port * * Based on drivers/char/serial_amba.c, by ARM Ltd. @@ -1639,9 +1637,8 @@ static struct SICC_info *siccuart_get(int line) state->count++; if (state->info) return state->info; - info = kmalloc(sizeof(struct SICC_info), GFP_KERNEL); + info = kzalloc(sizeof(struct SICC_info), GFP_KERNEL); if (info) { - memset(info, 0, sizeof(struct SICC_info)); init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); init_waitqueue_head(&info->delta_msr_wait); diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index 579cd40258b..12b84ca5132 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -73,7 +73,7 @@ cpm_mask_irq(unsigned int irq) { int cpm_vec = irq - CPM_IRQ_OFFSET; - out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr) & ~(1 << cpm_vec)); + clrbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec)); } static void @@ -81,7 +81,7 @@ cpm_unmask_irq(unsigned int irq) { int cpm_vec = irq - CPM_IRQ_OFFSET; - out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr) | (1 << cpm_vec)); + setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec)); } static void @@ -198,7 +198,7 @@ cpm_interrupt_init(void) if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction)) panic("Could not allocate CPM error IRQ!"); - out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr) | CICR_IEN); + setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr, CICR_IEN); } /* diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c index 49eb2a7e65c..a892356d5c3 100644 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ b/arch/ppc/8xx_io/cs4218_tdm.c @@ -126,11 +126,11 @@ static int numReadBufs = 4, readbufSize = 32; */ static volatile cbd_t *rx_base, *rx_cur, *tx_base, *tx_cur; -MODULE_PARM(catchRadius, "i"); -MODULE_PARM(numBufs, "i"); -MODULE_PARM(bufSize, "i"); -MODULE_PARM(numreadBufs, "i"); -MODULE_PARM(readbufSize, "i"); +module_param(catchRadius, int, 0); +module_param(numBufs, int, 0); +module_param(bufSize, int, 0); +module_param(numreadBufs, int, 0); +module_param(readbufSize, int, 0); #define arraysize(x) (sizeof(x)/sizeof(*(x))) #define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff)) diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 11899f06bf0..e9a8f5d1dfc 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -19,6 +19,10 @@ config RWSEM_XCHGADD_ALGORITHM bool default y +config GENERIC_HWEIGHT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -57,15 +61,15 @@ config 6xx select PPC_FPU help There are four types of PowerPC chips supported. The more common - types (601, 603, 604, 740, 750, 7400), the Motorola embedded - versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM - embedded versions (403 and 405) and the POWER3 processor. - (For support for more recent 64-bit processors, set ARCH=powerpc.) + types (601, 603, 604, 740, 750, 7400), the older Freescale + (formerly Motorola) embedded versions (821, 823, 850, 855, 860, + 52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and + the Book E embedded processors from IBM (44x) and Freescale (85xx). + For support for 64-bit processors, set ARCH=powerpc. Unless you are building a kernel for one of the embedded processor - systems or a POWER3-based IBM RS/6000, choose 6xx. - Note that the kernel runs in 32-bit mode even on 64-bit chips. - Also note that because the 52xx, 82xx, & 83xx family has a 603e core, - specific support for that chipset is asked later on. + systems, choose 6xx. + Also note that because the 52xx, 82xx, & 83xx family have a 603e + core, specific support for that chipset is asked later on. config 40x bool "40x" @@ -73,10 +77,6 @@ config 40x config 44x bool "44x" -config POWER3 - select PPC_FPU - bool "POWER3" - config 8xx bool "8xx" @@ -248,14 +248,9 @@ config PPC601_SYNC_FIX source arch/ppc/platforms/4xx/Kconfig source arch/ppc/platforms/85xx/Kconfig -config PPC64BRIDGE - bool - depends on POWER3 - default y - config PPC_STD_MMU bool - depends on 6xx || POWER3 + depends on 6xx default y config NOT_COHERENT_CACHE @@ -481,10 +476,57 @@ config WINCEPT endchoice +menu "Freescale Ethernet driver platform-specific options" + depends on FS_ENET + + config MPC8xx_SECOND_ETH + bool "Second Ethernet channel" + depends on (MPC885ADS || MPC86XADS) + default y + help + This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. + The latter will use SCC1, for 885ADS you can select it below. + + choice + prompt "Second Ethernet channel" + depends on MPC8xx_SECOND_ETH + default MPC8xx_SECOND_ETH_FEC2 + + config MPC8xx_SECOND_ETH_FEC2 + bool "FEC2" + depends on MPC885ADS + help + Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 + (often 2-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC1 + bool "SCC1" + depends on MPC86XADS + select MPC8xx_SCC_ENET_FIXED + help + Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC3 + bool "SCC3" + depends on MPC885ADS + help + Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + endchoice + + config MPC8xx_SCC_ENET_FIXED + depends on MPC8xx_SECOND_ETH_SCC + default n + bool "Use fixed MII-less mode for SCC Ethernet" + +endmenu + choice prompt "Machine Type" - depends on 6xx || POWER3 - default PPC_MULTIPLATFORM + depends on 6xx + default PPC_PREP ---help--- Linux currently supports several different kinds of PowerPC-based machines: Apple Power Macintoshes and clones (such as the Motorola @@ -494,15 +536,14 @@ choice Platform) machines (including all of the recent IBM RS/6000 and pSeries machines), and several embedded PowerPC systems containing 4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the - default option is to build a kernel which works on PReP and CHRP. + default option is to build a kernel which works on PReP. - Note that support for Apple machines is now only available with - ARCH=powerpc, and has been removed from this menu. If you wish - to build a kernel for an Apple machine, exit this configuration - process and re-run it with ARCH=powerpc. + Note that support for Apple and CHRP machines is now only available + with ARCH=powerpc, and has been removed from this menu. If you + wish to build a kernel for an Apple or CHRP machine, exit this + configuration process and re-run it with ARCH=powerpc. - Select CHRP/PReP if configuring for an IBM RS/6000 or - pSeries machine, or a PReP machine. + Select PReP if configuring for a PReP machine. Select Gemini if configuring for a Synergy Microsystems' Gemini series Single Board Computer. More information is available at: @@ -511,8 +552,8 @@ choice Select APUS if configuring for a PowerUP Amiga. More information is available at: <http://linux-apus.sourceforge.net/>. -config PPC_MULTIPLATFORM - bool "CHRP/PReP" +config PPC_PREP + bool "PReP" config APUS bool "Amiga-APUS" @@ -664,6 +705,13 @@ config LITE5200 much but it's only been tested on this board version. I think this board is also known as IceCube. +config LITE5200B + bool "Freescale LITE5200B" + depends LITE5200 + help + Support for the LITE5200B dev board for the MPC5200 from Freescale. + This is the new board with 2 PCI slots. + config MPC834x_SYS bool "Freescale MPC834x SYS" help @@ -749,25 +797,6 @@ config CPM2 you wish to build a kernel for a machine with a CPM2 coprocessor on it (826x, 827x, 8560). -config PPC_CHRP - bool "Support for CHRP (Common Hardware Reference Platform) machines" - depends on PPC_MULTIPLATFORM - select PPC_I8259 - select PPC_INDIRECT_PCI - default y - -config PPC_PREP - bool "Support for PReP (PowerPC Reference Platform) machines" - depends on PPC_MULTIPLATFORM - select PPC_I8259 - select PPC_INDIRECT_PCI - default y - -config PPC_OF - bool - depends on PPC_CHRP - default y - config PPC_GEN550 bool depends on SANDPOINT || SPRUCE || PPLUS || \ @@ -926,14 +955,6 @@ source "mm/Kconfig" source "fs/Kconfig.binfmt" -config PROC_DEVICETREE - bool "Support for Open Firmware device tree in /proc" - depends on PPC_OF && PROC_FS - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware. If unsure, say Y here. - config PREP_RESIDUAL bool "Support for PReP Residual Data" depends on PPC_PREP @@ -1126,8 +1147,7 @@ menu "Bus options" config ISA bool "Support for ISA-bus hardware" - depends on PPC_PREP || PPC_CHRP - select PPC_I8259 + depends on PPC_PREP help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff @@ -1137,18 +1157,18 @@ config ISA config GENERIC_ISA_DMA bool - depends on POWER3 || 6xx && !CPM2 + depends on 6xx && !CPM2 default y config PPC_I8259 bool - default y if 85xx + default y if 85xx || PPC_PREP default n config PPC_INDIRECT_PCI bool depends on PCI - default y if 40x || 44x || 85xx || 83xx + default y if 40x || 44x || 85xx || 83xx || PPC_PREP default n config EISA @@ -1339,7 +1359,7 @@ config CONSISTENT_SIZE config BOOT_LOAD_BOOL bool "Set the boot link/load address" - depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM + depends on ADVANCED_OPTIONS && !PPC_PREP help This option allows you to set the initial load address of the zImage or zImage.initrd file. This can be useful if you are on a board diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug index 61653cb60c4..f94b8774097 100644 --- a/arch/ppc/Kconfig.debug +++ b/arch/ppc/Kconfig.debug @@ -53,13 +53,6 @@ config BDI_SWITCH Unless you are intending to debug the kernel with one of these machines, say N here. -config BOOTX_TEXT - bool "Support for early boot text console (BootX or OpenFirmware only)" - depends PPC_OF - help - Say Y here to see progress messages from the boot firmware in text - mode. Requires either BootX or Open Firmware. - config SERIAL_TEXT_DEBUG bool "Support for early boot texts over serial port" depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \ @@ -67,7 +60,7 @@ config SERIAL_TEXT_DEBUG config PPC_OCP bool - depends on IBM_OCP || XILINX_OCP + depends on IBM_OCP default y endmenu diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 98e940beeb3..0db66dcf072 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -40,10 +40,8 @@ ifndef CONFIG_FSL_BOOKE CFLAGS += -mstring endif -cpu-as-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_6xx) += -Wa,-maltivec -cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec cpu-as-$(CONFIG_E500) += -Wa,-me500 cpu-as-$(CONFIG_E200) += -Wa,-me200 @@ -59,8 +57,6 @@ head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o -head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o -head-$(CONFIG_POWER4) += arch/ppc/kernel/idle_power4.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ @@ -71,7 +67,7 @@ core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/ core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/ core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ -core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ +core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/ core-$(CONFIG_XMON) += arch/ppc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/ @@ -82,7 +78,7 @@ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm -.PHONY: $(BOOT_TARGETS) +PHONY += $(BOOT_TARGETS) all: uImage zImage diff --git a/arch/ppc/amiga/amiints.c b/arch/ppc/amiga/amiints.c index 5f35cf3986f..b2bba052ab9 100644 --- a/arch/ppc/amiga/amiints.c +++ b/arch/ppc/amiga/amiints.c @@ -1,5 +1,5 @@ /* - * arch/ppc/amiga/amiints.c -- Amiga Linux interrupt handling code + * Amiga Linux interrupt handling code * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive diff --git a/arch/ppc/amiga/bootinfo.c b/arch/ppc/amiga/bootinfo.c index e2e965661d0..efd869a3ed9 100644 --- a/arch/ppc/amiga/bootinfo.c +++ b/arch/ppc/amiga/bootinfo.c @@ -1,6 +1,4 @@ /* - * arch/ppc/amiga/bootinfo.c - * * Extracted from arch/m68k/kernel/setup.c. * Should be properly generalized and put somewhere else. * Jesper diff --git a/arch/ppc/amiga/cia.c b/arch/ppc/amiga/cia.c index 4431c58f611..9558f2f40e6 100644 --- a/arch/ppc/amiga/cia.c +++ b/arch/ppc/amiga/cia.c @@ -1,6 +1,4 @@ /* - * arch/ppc/amiga/cia.c - CIA support - * * Copyright (C) 1996 Roman Zippel * * The concept of some functions bases on the original Amiga OS function diff --git a/arch/ppc/amiga/config.c b/arch/ppc/amiga/config.c index 60e2da1c92c..bbe47c9bd70 100644 --- a/arch/ppc/amiga/config.c +++ b/arch/ppc/amiga/config.c @@ -1,8 +1,6 @@ #define m68k_debug_device debug_device /* - * arch/ppc/amiga/config.c - * * Copyright (C) 1993 Hamish Macdonald * * This file is subject to the terms and conditions of the GNU General Public diff --git a/arch/ppc/amiga/ints.c b/arch/ppc/amiga/ints.c index 5d318e498f0..083a1746219 100644 --- a/arch/ppc/amiga/ints.c +++ b/arch/ppc/amiga/ints.c @@ -1,6 +1,4 @@ /* - * arch/ppc/amiga/ints.c - * * Linux/m68k general interrupt handling code from arch/m68k/kernel/ints.c * Needed to drive the m68k emulating IRQ hardware on the PowerUp boards. */ diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile index efd8ce515d5..b739e25d472 100644 --- a/arch/ppc/boot/Makefile +++ b/arch/ppc/boot/Makefile @@ -1,6 +1,9 @@ # # arch/ppc/boot/Makefile # +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. +# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. @@ -16,16 +19,15 @@ HOSTCFLAGS += -Iarch/$(ARCH)/boot/include BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd bootdir-y := simple -bootdir-$(CONFIG_PPC_OF) += openfirmware subdir-y := lib common images -subdir-$(CONFIG_PPC_MULTIPLATFORM) += of1275 +subdir-$(CONFIG_PPC_PREP) += of1275 # for cleaning -subdir- += simple openfirmware +subdir- += simple -hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree) +hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree) -.PHONY: $(BOOT_TARGETS) $(bootdir-y) +PHONY += $(BOOT_TARGETS) $(bootdir-y) $(BOOT_TARGETS): $(bootdir-y) diff --git a/arch/ppc/boot/common/Makefile b/arch/ppc/boot/common/Makefile index f88d647d5dd..a2e85e3beb8 100644 --- a/arch/ppc/boot/common/Makefile +++ b/arch/ppc/boot/common/Makefile @@ -1,6 +1,3 @@ -# -# arch/ppc/boot/common/Makefile -# # This file is subject to the terms and conditions of the GNU General Public # License. See the file "COPYING" in the main directory of this archive # for more details. diff --git a/arch/ppc/boot/common/bootinfo.c b/arch/ppc/boot/common/bootinfo.c index 9c6e528940e..f4dc9b9fab9 100644 --- a/arch/ppc/boot/common/bootinfo.c +++ b/arch/ppc/boot/common/bootinfo.c @@ -1,6 +1,4 @@ /* - * arch/ppc/common/bootinfo.c - * * General bootinfo record utilities * Author: Randy Vinson <rvinson@mvista.com> * diff --git a/arch/ppc/boot/common/misc-common.c b/arch/ppc/boot/common/misc-common.c index e79e6b3f276..073830a8559 100644 --- a/arch/ppc/boot/common/misc-common.c +++ b/arch/ppc/boot/common/misc-common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/misc-common.c - * * Misc. bootloader code (almost) all platforms can use * * Author: Johnnie Peters <jpeters@mvista.com> diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c index 26818bbb6cf..4f00c93ac87 100644 --- a/arch/ppc/boot/common/ns16550.c +++ b/arch/ppc/boot/common/ns16550.c @@ -8,6 +8,9 @@ #include <linux/serial_reg.h> #include <asm/serial.h> +#if defined(CONFIG_XILINX_VIRTEX) +#include <platforms/4xx/xparameters/xparameters.h> +#endif #include "nonstdio.h" #include "serial.h" diff --git a/arch/ppc/boot/common/serial_stub.c b/arch/ppc/boot/common/serial_stub.c index 03dfaa01fa6..5cc9ae66a8b 100644 --- a/arch/ppc/boot/common/serial_stub.c +++ b/arch/ppc/boot/common/serial_stub.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/serial_stub.c - * * This is a few stub routines to make the boot code cleaner looking when * there is no serial port support doesn't need to be closed, for example. * diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S index 368ec035e6c..0c5e43c4ae0 100644 --- a/arch/ppc/boot/common/util.S +++ b/arch/ppc/boot/common/util.S @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/util.S - * * Useful bootup functions, which are more easily done in asm than C. * * NOTE: Be very very careful about the registers you use here. diff --git a/arch/ppc/boot/include/mpc10x.h b/arch/ppc/boot/include/mpc10x.h index 6cd40ecabc7..6e5d540d8d3 100644 --- a/arch/ppc/boot/include/mpc10x.h +++ b/arch/ppc/boot/include/mpc10x.h @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/include/mpc10.h - * * Common defines for the Motorola SPS MPC106/8240/107 Host bridge/Mem * ctrl/EPIC/etc. * diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile deleted file mode 100644 index 2a411ec2e65..00000000000 --- a/arch/ppc/boot/openfirmware/Makefile +++ /dev/null @@ -1,106 +0,0 @@ -# Makefile for making bootable images on various OpenFirmware machines. -# -# Paul Mackerras January 1997 -# XCOFF bootable images for PowerMacs -# Geert Uytterhoeven September 1997 -# ELF bootable iamges for CHRP machines. -# Tom Rini January 2001 -# Cleaned up, moved into arch/ppc/boot/pmac -# Tom Rini July/August 2002 -# Merged 'chrp' and 'pmac' into 'openfirmware', and cleaned up the -# rules. - -zImage.initrd znetboot.initrd: del-ramdisk-sec := -R .ramdisk -zImage.initrd znetboot.initrd: initrd := .initrd - - -boot := arch/ppc/boot -common := $(boot)/common -utils := $(boot)/utils -bootlib := $(boot)/lib -of1275 := $(boot)/of1275 -images := $(boot)/images - -CHRP_LD_ARGS := -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00800000 - -COMMONOBJS := start.o misc.o common.o -CHRPOBJS := crt0.o $(COMMONOBJS) chrpmain.o - -targets := $(CHRPOBJS) dummy.o -CHRPOBJS := $(addprefix $(obj)/, $(CHRPOBJS)) - -LIBS := lib/lib.a $(bootlib)/lib.a $(of1275)/lib.a $(common)/lib.a - -ifdef CONFIG_SMP -END := .smp -endif -ifdef CONFIG_PPC64BRIDGE -END += .64 -endif - - -$(images)/ramdisk.image.gz: - @echo ' MISSING $@' - @echo ' RAM disk image must be provided separately' - @/bin/false - -quiet_cmd_genimage = GEN $@ - cmd_genimage = $(OBJCOPY) -R .comment \ - --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data $< $@ - -targets += image.o -$(obj)/image.o: $(obj)/dummy.o $(images)/vmlinux.gz FORCE - $(call if_changed,genimage) - -# Place the ramdisk in the initrd image. -quiet_cmd_genimage-initrd = GEN $@ - cmd_genimage-initrd = $(OBJCOPY) $< $@ \ - --add-section=.ramdisk=$(images)/ramdisk.image.gz \ - --set-section-flags=.ramdisk=contents,alloc,load,readonly,data -targets += image.initrd.o -$(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE - $(call if_changed,genimage-initrd) - - -targets += crt0.o -$(obj)/crt0.o: $(common)/crt0.S FORCE - $(call if_changed_dep,as_o_S) - -quiet_cmd_gen-chrp = CHRP $@ - cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $(CHRPOBJS) $< $(LIBS) && \ - $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec) - -$(images)/zImage.chrp: $(obj)/image.o $(CHRPOBJS) $(LIBS) \ - $(srctree)/$(boot)/ld.script - $(call cmd,gen-chrp) -$(images)/zImage.initrd.chrp: $(obj)/image.initrd.o $(CHRPOBJS) $(LIBS) \ - $(srctree)/$(boot)/ld.script - $(call cmd,gen-chrp) - -quiet_cmd_addnote = ADDNOTE $@ - cmd_addnote = cat $< > $@ && $(utils)/addnote $@ -$(images)/zImage.chrp-rs6k $(images)/zImage.initrd.chrp-rs6k: \ - %-rs6k: % - $(call cmd,addnote) - -# The targets used on the make command-line - -.PHONY: zImage zImage.initrd -zImage: $(images)/zImage.chrp \ - $(images)/zImage.chrp-rs6k - @echo ' kernel: $@ is ready ($<)' -zImage.initrd: $(images)/zImage.initrd.chrp \ - $(images)/zImage.initrd.chrp-rs6k - @echo ' kernel: $@ is ready ($<)' - -TFTPIMAGE := /tftpboot/zImage - -.PHONY: znetboot znetboot.initrd -znetboot: $(images)/zImage.chrp - cp $(images)/zImage.chrp $(TFTPIMAGE).chrp$(END) - @echo ' kernel: $@ is ready ($<)' -znetboot.initrd:$(images)/zImage.initrd.chrp - cp $(images)/zImage.initrd.chrp $(TFTPIMAGE).chrp$(END) - @echo ' kernel: $@ is ready ($<)' - diff --git a/arch/ppc/boot/openfirmware/chrpmain.c b/arch/ppc/boot/openfirmware/chrpmain.c deleted file mode 100644 index 245dbd9fc12..00000000000 --- a/arch/ppc/boot/openfirmware/chrpmain.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/string.h> -#include "nonstdio.h" -#include "of1275.h" -#include <asm/processor.h> -#include <asm/page.h> - -/* Passed from the linker */ -extern char __image_begin, __image_end; -extern char __ramdisk_begin, __ramdisk_end; -extern char _start, _end; - -extern unsigned int heap_max; -extern void flush_cache(void *, unsigned long); -extern void gunzip(void *, int, unsigned char *, int *); -extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach, - unsigned int progend); - -char *avail_ram; -char *begin_avail, *end_avail; -char *avail_high; - -#define RAM_START 0x00000000 -#define RAM_END (64<<20) - -#define BOOT_START ((unsigned long)_start) -#define BOOT_END ((unsigned long)(_end + 0xFFF) & ~0xFFF) - -#define RAM_FREE ((unsigned long)(_end+0x1000)&~0xFFF) -#define PROG_START 0x00010000 -#define PROG_SIZE 0x007f0000 /* 8MB */ - -#define SCRATCH_SIZE (128 << 10) - -static char scratch[SCRATCH_SIZE]; /* 128k of scratch space for gunzip */ - -typedef void (*kernel_start_t)(int, int, void *, unsigned int, unsigned int); - -void -boot(int a1, int a2, void *prom) -{ - unsigned sa, len; - void *dst; - unsigned char *im; - unsigned int initrd_size, initrd_start; - - printf("chrpboot starting: loaded at 0x%p\n\r", &_start); - - initrd_size = &__ramdisk_end - &__ramdisk_begin; - if (initrd_size) { - initrd_start = (RAM_END - initrd_size) & ~0xFFF; - a1 = initrd_start; - a2 = initrd_size; - claim(initrd_start, RAM_END - initrd_start, 0); - printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r", - initrd_start, &__ramdisk_begin, initrd_size); - memcpy((char *)initrd_start, &__ramdisk_begin, initrd_size); - } else { - initrd_start = 0; - initrd_size = 0; - a2 = 0xdeadbeef; - } - - im = &__image_begin; - len = &__image_end - &__image_begin; - /* claim 4MB starting at PROG_START */ - claim(PROG_START, PROG_SIZE - PROG_START, 0); - dst = (void *) PROG_START; - if (im[0] == 0x1f && im[1] == 0x8b) { - avail_ram = scratch; - begin_avail = avail_high = avail_ram; - end_avail = scratch + sizeof(scratch); - printf("gunzipping (0x%p <- 0x%p:0x%p)...", dst, im, im+len); - gunzip(dst, PROG_SIZE - PROG_START, im, &len); - printf("done %u bytes\n\r", len); - printf("%u bytes of heap consumed, max in use %u\n\r", - avail_high - begin_avail, heap_max); - } else { - memmove(dst, im, len); - } - - flush_cache(dst, len); - make_bi_recs(((unsigned long) dst + len), "chrpboot", _MACH_chrp, - (PROG_START + PROG_SIZE)); - - sa = PROG_START; - printf("start address = 0x%x\n\r", sa); - - (*(kernel_start_t)sa)(a1, a2, prom, initrd_start, initrd_size); - - printf("returned?\n\r"); - - pause(); -} diff --git a/arch/ppc/boot/openfirmware/common.c b/arch/ppc/boot/openfirmware/common.c deleted file mode 100644 index 0f46756a903..00000000000 --- a/arch/ppc/boot/openfirmware/common.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "nonstdio.h" -#include "of1275.h" -#include <linux/string.h> -#include <linux/zlib.h> -#include <asm/bootinfo.h> -#include <asm/page.h> - -/* Information from the linker */ - -extern int strcmp(const char *s1, const char *s2); -extern char *avail_ram, *avail_high; -extern char *end_avail; - -unsigned int heap_use, heap_max; - -struct memchunk { - unsigned int size; - struct memchunk *next; -}; - -static struct memchunk *freechunks; - -static void *zalloc(unsigned size) -{ - void *p; - struct memchunk **mpp, *mp; - - size = (size + 7) & -8; - heap_use += size; - if (heap_use > heap_max) - heap_max = heap_use; - for (mpp = &freechunks; (mp = *mpp) != 0; mpp = &mp->next) { - if (mp->size == size) { - *mpp = mp->next; - return mp; - } - } - p = avail_ram; - avail_ram += size; - if (avail_ram > avail_high) - avail_high = avail_ram; - if (avail_ram > end_avail) { - printf("oops... out of memory\n\r"); - pause(); - } - return p; -} - -#define HEAD_CRC 2 -#define EXTRA_FIELD 4 -#define ORIG_NAME 8 -#define COMMENT 0x10 -#define RESERVED 0xe0 - -void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) -{ - z_stream s; - int r, i, flags; - - /* skip header */ - i = 10; - flags = src[3]; - if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) { - printf("bad gzipped data\n\r"); - exit(); - } - if ((flags & EXTRA_FIELD) != 0) - i = 12 + src[10] + (src[11] << 8); - if ((flags & ORIG_NAME) != 0) - while (src[i++] != 0) - ; - if ((flags & COMMENT) != 0) - while (src[i++] != 0) - ; - if ((flags & HEAD_CRC) != 0) - i += 2; - if (i >= *lenp) { - printf("gunzip: ran out of data in header\n\r"); - exit(); - } - - /* Initialize ourself. */ - s.workspace = zalloc(zlib_inflate_workspacesize()); - r = zlib_inflateInit2(&s, -MAX_WBITS); - if (r != Z_OK) { - printf("zlib_inflateInit2 returned %d\n\r", r); - exit(); - } - s.next_in = src + i; - s.avail_in = *lenp - i; - s.next_out = dst; - s.avail_out = dstlen; - r = zlib_inflate(&s, Z_FINISH); - if (r != Z_OK && r != Z_STREAM_END) { - printf("inflate returned %d msg: %s\n\r", r, s.msg); - exit(); - } - *lenp = s.next_out - (unsigned char *) dst; - zlib_inflateEnd(&s); -} - -/* Make a bi_rec in OF. We need to be passed a name for BI_BOOTLOADER_ID, - * a machine type for BI_MACHTYPE, and the location where the end of the - * bootloader is (PROG_START + PROG_SIZE) - */ -void make_bi_recs(unsigned long addr, char *name, unsigned int mach, - unsigned long progend) -{ - struct bi_record *rec; - - - /* leave a 1MB gap then align to the next 1MB boundary */ - addr = _ALIGN(addr+ (1<<20) - 1, (1<<20)); - /* oldworld machine seem very unhappy about this. -- Tom */ - if (addr >= progend) - claim(addr, 0x1000, 0); - - rec = (struct bi_record *)addr; - rec->tag = BI_FIRST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_BOOTLOADER_ID; - sprintf( (char *)rec->data, name); - rec->size = sizeof(struct bi_record) + strlen(name) + 1; - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_MACHTYPE; - rec->data[0] = mach; - rec->data[1] = 1; - rec->size = sizeof(struct bi_record) + 2 * sizeof(unsigned long); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_LAST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); -} diff --git a/arch/ppc/boot/openfirmware/dummy.c b/arch/ppc/boot/openfirmware/dummy.c deleted file mode 100644 index 31dbf45bf99..00000000000 --- a/arch/ppc/boot/openfirmware/dummy.c +++ /dev/null @@ -1,4 +0,0 @@ -int main(void) -{ - return 0; -} diff --git a/arch/ppc/boot/openfirmware/misc.S b/arch/ppc/boot/openfirmware/misc.S deleted file mode 100644 index ab9e897cadd..00000000000 --- a/arch/ppc/boot/openfirmware/misc.S +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - .text - -/* - * Use the BAT2 & 3 registers to map the 1st 16MB of RAM to - * the address given as the 1st argument. - */ - .globl setup_bats -setup_bats: - mfpvr 5 - rlwinm 5,5,16,16,31 /* r3 = 1 for 601, 4 for 604 */ - cmpwi 0,5,1 - li 0,0 - bne 4f - mtibatl 3,0 /* invalidate BAT first */ - ori 3,3,4 /* set up BAT registers for 601 */ - li 4,0x7f - mtibatu 2,3 - mtibatl 2,4 - oris 3,3,0x80 - oris 4,4,0x80 - mtibatu 3,3 - mtibatl 3,4 - b 5f -4: mtdbatu 3,0 /* invalidate BATs first */ - mtibatu 3,0 - ori 3,3,0xff /* set up BAT registers for 604 */ - li 4,2 - mtdbatl 2,4 - mtdbatu 2,3 - mtibatl 2,4 - mtibatu 2,3 - oris 3,3,0x80 - oris 4,4,0x80 - mtdbatl 3,4 - mtdbatu 3,3 - mtibatl 3,4 - mtibatu 3,3 -5: sync - isync - blr - -/* - * Flush the dcache and invalidate the icache for a range of addresses. - * - * flush_cache(addr, len) - */ - .global flush_cache -flush_cache: - addi 4,4,0x1f /* len = (len + 0x1f) / 0x20 */ - rlwinm. 4,4,27,5,31 - mtctr 4 - beqlr -1: dcbf 0,3 - icbi 0,3 - addi 3,3,0x20 - bdnz 1b - sync - isync - blr diff --git a/arch/ppc/boot/openfirmware/start.c b/arch/ppc/boot/openfirmware/start.c deleted file mode 100644 index 1617a26956b..00000000000 --- a/arch/ppc/boot/openfirmware/start.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdarg.h> -#include "of1275.h" - -extern int strlen(const char *s); -extern void boot(int a1, int a2, void *prom); - -phandle stdin; -phandle stdout; -phandle stderr; - -void printk(char *fmt, ...); - -void -start(int a1, int a2, void *promptr) -{ - ofinit(promptr); - if (ofstdio(&stdin, &stdout, &stderr)) - exit(); - - boot(a1, a2, promptr); - for (;;) - exit(); -} - -int writestring(void *f, char *ptr, int nb) -{ - int w = 0, i; - char *ret = "\r"; - - for (i = 0; i < nb; ++i) { - if (ptr[i] == '\n') { - if (i > w) { - write(f, ptr + w, i - w); - w = i; - } - write(f, ret, 1); - } - } - if (w < nb) - write(f, ptr + w, nb - w); - return nb; -} - -int -putc(int c, void *f) -{ - char ch = c; - - return writestring(f, &ch, 1) == 1? c: -1; -} - -int -putchar(int c) -{ - return putc(c, stdout); -} - -int -fputs(char *str, void *f) -{ - int n = strlen(str); - - return writestring(f, str, n) == n? 0: -1; -} - -int -readchar(void) -{ - char ch; - - for (;;) { - switch (read(stdin, &ch, 1)) { - case 1: - return ch; - case -1: - printk("read(stdin) returned -1\n"); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - putchar('\a'); - else { - putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -extern int vsprintf(char *buf, const char *fmt, va_list args); -static char sprint_buf[1024]; - -void -printk(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - writestring(stdout, sprint_buf, n); -} - -int -printf(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - writestring(stdout, sprint_buf, n); - return n; -} diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index 9533f8de238..28be01b99c4 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -192,6 +192,7 @@ boot-$(CONFIG_8xx) += embed_config.o boot-$(CONFIG_8260) += embed_config.o boot-$(CONFIG_EP405) += embed_config.o boot-$(CONFIG_XILINX_ML300) += embed_config.o +boot-$(CONFIG_XILINX_ML403) += embed_config.o boot-$(CONFIG_BSEIP) += iic.o boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o boot-$(CONFIG_MV64X60) += misc-mv64x60.o diff --git a/arch/ppc/boot/simple/cpc700_memory.c b/arch/ppc/boot/simple/cpc700_memory.c index 8c75cf6c238..d75420a45a5 100644 --- a/arch/ppc/boot/simple/cpc700_memory.c +++ b/arch/ppc/boot/simple/cpc700_memory.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/cpc700_memory.c - * * Find memory based upon settings in the CPC700 bridge * * Author: Dan Cox diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c index 491a691d10c..3a51b106294 100644 --- a/arch/ppc/boot/simple/embed_config.c +++ b/arch/ppc/boot/simple/embed_config.c @@ -21,6 +21,9 @@ #ifdef CONFIG_40x #include <asm/io.h> #endif +#ifdef CONFIG_XILINX_VIRTEX +#include <platforms/4xx/xparameters/xparameters.h> +#endif extern unsigned long timebase_period_ns; /* For those boards that don't provide one. @@ -742,7 +745,7 @@ embed_config(bd_t **bdp) } #endif /* WILLOW */ -#ifdef CONFIG_XILINX_ML300 +#if defined(CONFIG_XILINX_ML300) || defined(CONFIG_XILINX_ML403) void embed_config(bd_t ** bdp) { @@ -779,7 +782,7 @@ embed_config(bd_t ** bdp) timebase_period_ns = 1000000000 / bd->bi_tbfreq; /* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */ } -#endif /* CONFIG_XILINX_ML300 */ +#endif /* CONFIG_XILINX_ML300 || CONFIG_XILINX_ML403 */ #ifdef CONFIG_IBM_OPENBIOS /* This could possibly work for all treeboot roms. diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S index 5e4adc298bf..160da1006ff 100644 --- a/arch/ppc/boot/simple/head.S +++ b/arch/ppc/boot/simple/head.S @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/head.S - * * Initial board bringup code for many different boards. * * Author: Tom Rini @@ -65,6 +63,13 @@ start_: */ #endif +#if defined(CONFIG_XILINX_VIRTEX_4_FX) + /* PPC errata 213: only for Virtex-4 FX */ + mfccr0 0 + oris 0,0,0x50000000@h + mtccr0 0 +#endif + mflr r3 /* Save our actual starting address. */ /* The following functions we call must not modify r3 or r4..... diff --git a/arch/ppc/boot/simple/misc-chestnut.c b/arch/ppc/boot/simple/misc-chestnut.c index 0dce7f3557e..b94e142ad89 100644 --- a/arch/ppc/boot/simple/misc-chestnut.c +++ b/arch/ppc/boot/simple/misc-chestnut.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-chestnut.c - * * Setup for the IBM Chestnut (ibm-750fxgx_eval) * * Author: Mark A. Greer <mgreer@mvista.com> diff --git a/arch/ppc/boot/simple/misc-cpci690.c b/arch/ppc/boot/simple/misc-cpci690.c index 26860300fa0..8a8614d11a3 100644 --- a/arch/ppc/boot/simple/misc-cpci690.c +++ b/arch/ppc/boot/simple/misc-cpci690.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-cpci690.c - * * Add birec data for Force CPCI690 board. * * Author: Mark A. Greer <source@mvista.com> diff --git a/arch/ppc/boot/simple/misc-ev64260.c b/arch/ppc/boot/simple/misc-ev64260.c index 52ece6937a7..2678c224af2 100644 --- a/arch/ppc/boot/simple/misc-ev64260.c +++ b/arch/ppc/boot/simple/misc-ev64260.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-ev64260.c - * * Host bridge init code for the Marvell/Galileo EV-64260-BP evaluation board * with a GT64260 onboard. * diff --git a/arch/ppc/boot/simple/misc-ev64360.c b/arch/ppc/boot/simple/misc-ev64360.c index cd1ccf2a158..a212b5b988c 100644 --- a/arch/ppc/boot/simple/misc-ev64360.c +++ b/arch/ppc/boot/simple/misc-ev64360.c @@ -1,5 +1,4 @@ /* - * arch/ppc/boot/simple/misc-ev64360.c * Copyright (C) 2005 Lee Nicks <allinux@gmail.com> * * Based on arch/ppc/boot/simple/misc-katana.c from: diff --git a/arch/ppc/boot/simple/misc-katana.c b/arch/ppc/boot/simple/misc-katana.c index ec94a11baca..d97f2ee6f04 100644 --- a/arch/ppc/boot/simple/misc-katana.c +++ b/arch/ppc/boot/simple/misc-katana.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-katana.c - * * Set up MPSC values to bootwrapper can prompt user. * * Author: Mark A. Greer <source@mvista.com> diff --git a/arch/ppc/boot/simple/misc-mv64x60.c b/arch/ppc/boot/simple/misc-mv64x60.c index 258d4599fad..71ff20fd494 100644 --- a/arch/ppc/boot/simple/misc-mv64x60.c +++ b/arch/ppc/boot/simple/misc-mv64x60.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-mv64x60.c - * * Relocate bridge's register base and call board specific routine. * * Author: Mark A. Greer <source@mvista.com> diff --git a/arch/ppc/boot/simple/misc-prep.c b/arch/ppc/boot/simple/misc-prep.c index 75380ac4166..63def9d13d7 100644 --- a/arch/ppc/boot/simple/misc-prep.c +++ b/arch/ppc/boot/simple/misc-prep.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-prep.c - * * Maintainer: Tom Rini <trini@kernel.crashing.org> * * In the past: Gary Thomas, Cort Dougan <cort@cs.nmt.edu> diff --git a/arch/ppc/boot/simple/misc-radstone_ppc7d.c b/arch/ppc/boot/simple/misc-radstone_ppc7d.c index 569e0d4feea..0f302ea9c3d 100644 --- a/arch/ppc/boot/simple/misc-radstone_ppc7d.c +++ b/arch/ppc/boot/simple/misc-radstone_ppc7d.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/misc-radstone_ppc7d.c - * * Misc data for Radstone PPC7D board. * * Author: James Chapman <jchapman@katalix.com> diff --git a/arch/ppc/boot/simple/misc-spruce.c b/arch/ppc/boot/simple/misc-spruce.c index d012c39278f..0cad2f557a1 100644 --- a/arch/ppc/boot/simple/misc-spruce.c +++ b/arch/ppc/boot/simple/misc-spruce.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/spruce/misc.c - * * Misc. bootloader code for IBM Spruce reference platform * * Authors: Johnnie Peters <jpeters@mvista.com> diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index f415d6c6236..3d78571ad94 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -1,6 +1,4 @@ /* - * arch/ppc/simple/misc.c - * * Misc. bootloader code for many machines. This assumes you have are using * a 6xx/7xx/74xx CPU in your machine. This assumes the chunk of memory * below 8MB is free. Finally, it assumes you have a NS16550-style uart for diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c index 20d92a34ceb..8da8f576031 100644 --- a/arch/ppc/boot/simple/mpc10x_memory.c +++ b/arch/ppc/boot/simple/mpc10x_memory.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/common/mpc10x_common.c - * * A routine to find out how much memory the machine has. * * Based on: @@ -52,10 +50,10 @@ MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0) * the system. This assumes that the firmware has correctly set up the memory * controller registers. On CONFIG_PPC_PREP, we know we are being called * under a PReP memory map. On all other machines, we assume we are under - * a CHRP memory map. Further, on CONFIG_PPC_MULTIPLATFORM we must rename + * a CHRP memory map. Further, on CONFIG_PPC_PREP we must rename * this function. */ -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP #define get_mem_size mpc10x_get_mem_size #endif unsigned long diff --git a/arch/ppc/boot/simple/mpc52xx_tty.c b/arch/ppc/boot/simple/mpc52xx_tty.c index 3acc6b7c072..1964493cf3b 100644 --- a/arch/ppc/boot/simple/mpc52xx_tty.c +++ b/arch/ppc/boot/simple/mpc52xx_tty.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/mpc52xx_tty.c - * * Minimal serial functions needed to send messages out a MPC52xx * Programmable Serial Controller (PSC). * diff --git a/arch/ppc/boot/simple/mv64x60_tty.c b/arch/ppc/boot/simple/mv64x60_tty.c index b9c24d4c738..0c52f5c784a 100644 --- a/arch/ppc/boot/simple/mv64x60_tty.c +++ b/arch/ppc/boot/simple/mv64x60_tty.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/mv64x60_tty.c - * * Bootloader version of the embedded MPSC/UART driver for the Marvell 64x60. * Note: Due to a GT64260A erratum, DMA will be used for UART input (via SDMA). * diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c index 81f11d8b30a..3f2ed53f793 100644 --- a/arch/ppc/boot/simple/openbios.c +++ b/arch/ppc/boot/simple/openbios.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/openbios.c - * * Copyright (c) 2005 DENX Software Engineering * Stefan Roese <sr@denx.de> * diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S index 555a216ccc4..2533113c1cc 100644 --- a/arch/ppc/boot/simple/relocate.S +++ b/arch/ppc/boot/simple/relocate.S @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/simple/relocate.S - * * This is the common part of the loader relocation and initialization * process. All of the board/processor specific initialization is * done before we get here. @@ -196,7 +194,7 @@ start_ldr: /* * Start at the begining. */ -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP li r9,0xc mtlr r9 /* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD, diff --git a/arch/ppc/boot/utils/addnote.c b/arch/ppc/boot/utils/addnote.c deleted file mode 100644 index 6c52b18f2d0..00000000000 --- a/arch/ppc/boot/utils/addnote.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * Program to hack in a PT_NOTE program header entry in an ELF file. - * This is needed for OF on RS/6000s to load an image correctly. - * Note that OF needs a program header entry for the note, not an - * ELF section. - * - * Copyright 2000 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Usage: addnote zImage - */ -#include <stdio.h> -#include <stdlib.h> -#include <fcntl.h> -#include <unistd.h> -#include <string.h> - -char arch[] = "PowerPC"; - -#define N_DESCR 6 -unsigned int descr[N_DESCR] = { -#if 1 - /* values for IBM RS/6000 machines */ - 0xffffffff, /* real-mode = true */ - 0x00c00000, /* real-base, i.e. where we expect OF to be */ - 0xffffffff, /* real-size */ - 0xffffffff, /* virt-base */ - 0xffffffff, /* virt-size */ - 0x4000, /* load-base */ -#else - /* values for longtrail CHRP */ - 0, /* real-mode = false */ - 0xffffffff, /* real-base */ - 0xffffffff, /* real-size */ - 0xffffffff, /* virt-base */ - 0xffffffff, /* virt-size */ - 0x00600000, /* load-base */ -#endif -}; - -unsigned char buf[512]; - -#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) -#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2)) - -#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \ - buf[(off) + 1] = (v) & 0xff) -#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \ - PUT_16BE((off) + 2, (v))) - -/* Structure of an ELF file */ -#define E_IDENT 0 /* ELF header */ -#define E_PHOFF 28 -#define E_PHENTSIZE 42 -#define E_PHNUM 44 -#define E_HSIZE 52 /* size of ELF header */ - -#define EI_MAGIC 0 /* offsets in E_IDENT area */ -#define EI_CLASS 4 -#define EI_DATA 5 - -#define PH_TYPE 0 /* ELF program header */ -#define PH_OFFSET 4 -#define PH_FILESZ 16 -#define PH_HSIZE 32 /* size of program header */ - -#define PT_NOTE 4 /* Program header type = note */ - -#define ELFCLASS32 1 -#define ELFDATA2MSB 2 - -unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; - -int main(int ac, char **av) -{ - int fd, n, i; - int ph, ps, np; - int nnote, ns; - - if (ac != 2) { - fprintf(stderr, "Usage: %s elf-file\n", av[0]); - exit(1); - } - fd = open(av[1], O_RDWR); - if (fd < 0) { - perror(av[1]); - exit(1); - } - - nnote = strlen(arch) + 1 + (N_DESCR + 3) * 4; - - n = read(fd, buf, sizeof(buf)); - if (n < 0) { - perror("read"); - exit(1); - } - - if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0) - goto notelf; - - if (buf[E_IDENT+EI_CLASS] != ELFCLASS32 - || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) { - fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", - av[1]); - exit(1); - } - - ph = GET_32BE(E_PHOFF); - ps = GET_16BE(E_PHENTSIZE); - np = GET_16BE(E_PHNUM); - if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) - goto notelf; - if (ph + (np + 1) * ps + nnote > n) - goto nospace; - - for (i = 0; i < np; ++i) { - if (GET_32BE(ph + PH_TYPE) == PT_NOTE) { - fprintf(stderr, "%s already has a note entry\n", - av[1]); - exit(0); - } - ph += ps; - } - - /* XXX check that the area we want to use is all zeroes */ - for (i = 0; i < ps + nnote; ++i) - if (buf[ph + i] != 0) - goto nospace; - - /* fill in the program header entry */ - ns = ph + ps; - PUT_32BE(ph + PH_TYPE, PT_NOTE); - PUT_32BE(ph + PH_OFFSET, ns); - PUT_32BE(ph + PH_FILESZ, nnote); - - /* fill in the note area we point to */ - /* XXX we should probably make this a proper section */ - PUT_32BE(ns, strlen(arch) + 1); - PUT_32BE(ns + 4, N_DESCR * 4); - PUT_32BE(ns + 8, 0x1275); - strcpy(&buf[ns + 12], arch); - ns += 12 + strlen(arch) + 1; - for (i = 0; i < N_DESCR; ++i) - PUT_32BE(ns + i * 4, descr[i]); - - /* Update the number of program headers */ - PUT_16BE(E_PHNUM, np + 1); - - /* write back */ - lseek(fd, (long) 0, SEEK_SET); - i = write(fd, buf, n); - if (i < 0) { - perror("write"); - exit(1); - } - if (i < n) { - fprintf(stderr, "%s: write truncated\n", av[1]); - exit(1); - } - - exit(0); - - notelf: - fprintf(stderr, "%s does not appear to be an ELF file\n", av[0]); - exit(1); - - nospace: - fprintf(stderr, "sorry, I can't find space in %s to put the note\n", - av[0]); - exit(1); -} diff --git a/arch/ppc/boot/utils/hack-coff.c b/arch/ppc/boot/utils/hack-coff.c deleted file mode 100644 index 5e5a6573a1e..00000000000 --- a/arch/ppc/boot/utils/hack-coff.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * hack-coff.c - hack the header of an xcoff file to fill in - * a few fields needed by the Open Firmware xcoff loader on - * Power Macs but not initialized by objcopy. - * - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <fcntl.h> -#include <string.h> -#include "rs6000.h" - -#define AOUT_MAGIC 0x010b - -#define get_16be(x) ((((unsigned char *)(x))[0] << 8) \ - + ((unsigned char *)(x))[1]) -#define put_16be(x, v) (((unsigned char *)(x))[0] = (v) >> 8, \ - ((unsigned char *)(x))[1] = (v) & 0xff) -#define get_32be(x) ((((unsigned char *)(x))[0] << 24) \ - + (((unsigned char *)(x))[1] << 16) \ - + (((unsigned char *)(x))[2] << 8) \ - + ((unsigned char *)(x))[3]) - -int -main(int ac, char **av) -{ - int fd; - int i, nsect; - int aoutsz; - struct external_filehdr fhdr; - AOUTHDR aout; - struct external_scnhdr shdr; - - if (ac != 2) { - fprintf(stderr, "Usage: hack-coff coff-file\n"); - exit(1); - } - if ((fd = open(av[1], 2)) == -1) { - perror(av[2]); - exit(1); - } - if (read(fd, &fhdr, sizeof(fhdr)) != sizeof(fhdr)) - goto readerr; - i = get_16be(fhdr.f_magic); - if (i != U802TOCMAGIC && i != U802WRMAGIC && i != U802ROMAGIC) { - fprintf(stderr, "%s: not an xcoff file\n", av[1]); - exit(1); - } - aoutsz = get_16be(fhdr.f_opthdr); - if (read(fd, &aout, aoutsz) != aoutsz) - goto readerr; - nsect = get_16be(fhdr.f_nscns); - for (i = 0; i < nsect; ++i) { - if (read(fd, &shdr, sizeof(shdr)) != sizeof(shdr)) - goto readerr; - if (strcmp(shdr.s_name, ".text") == 0) { - put_16be(aout.o_snentry, i+1); - put_16be(aout.o_sntext, i+1); - } else if (strcmp(shdr.s_name, ".data") == 0) { - put_16be(aout.o_sndata, i+1); - } else if (strcmp(shdr.s_name, ".bss") == 0) { - put_16be(aout.o_snbss, i+1); - } - } - put_16be(aout.magic, AOUT_MAGIC); - if (lseek(fd, (long) sizeof(struct external_filehdr), 0) == -1 - || write(fd, &aout, aoutsz) != aoutsz) { - fprintf(stderr, "%s: write error\n", av[1]); - exit(1); - } - close(fd); - exit(0); - -readerr: - fprintf(stderr, "%s: read error or file too short\n", av[1]); - exit(1); -} diff --git a/arch/ppc/boot/utils/mkbugboot.c b/arch/ppc/boot/utils/mkbugboot.c index 886122283f3..29115e01f60 100644 --- a/arch/ppc/boot/utils/mkbugboot.c +++ b/arch/ppc/boot/utils/mkbugboot.c @@ -1,6 +1,4 @@ /* - * arch/ppc/boot/utils/mkbugboot.c - * * Makes a Motorola PPCBUG ROM bootable image which can be flashed * into one of the FLASH banks on a Motorola PowerPlus board. * diff --git a/arch/ppc/boot/utils/mknote.c b/arch/ppc/boot/utils/mknote.c deleted file mode 100644 index b9fbb2cbfc8..00000000000 --- a/arch/ppc/boot/utils/mknote.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) Cort Dougan 1999. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Generate a note section as per the CHRP specification. - * - */ - -#include <stdio.h> -#include <string.h> - -#define PL(x) printf("%c%c%c%c", ((x)>>24)&0xff, ((x)>>16)&0xff, ((x)>>8)&0xff, (x)&0xff ); - -int main(void) -{ -/* header */ - /* namesz */ - PL(strlen("PowerPC")+1); - /* descrsz */ - PL(6*4); - /* type */ - PL(0x1275); - /* name */ - printf("PowerPC"); printf("%c", 0); - -/* descriptor */ - /* real-mode */ - PL(0xffffffff); - /* real-base */ - PL(0x00c00000); - /* real-size */ - PL(0xffffffff); - /* virt-base */ - PL(0xffffffff); - /* virt-size */ - PL(0xffffffff); - /* load-base */ - PL(0x4000); - return 0; -} diff --git a/arch/ppc/configs/ibmchrp_defconfig b/arch/ppc/configs/ibmchrp_defconfig deleted file mode 100644 index 27f3e69c1f9..00000000000 --- a/arch/ppc/configs/ibmchrp_defconfig +++ /dev/null @@ -1,875 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -# CONFIG_STANDALONE is not set -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_CHRP=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_PREP=y -CONFIG_PPC_OF=y -CONFIG_PPCBUG_NVRAM=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PROC_DEVICETREE=y -CONFIG_PPC_RTAS=y -# CONFIG_PREP_RESIDUAL is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -CONFIG_ISA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_LBD=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_ADB is not set -# CONFIG_ADB_CUDA is not set -# CONFIG_ADB_PMU is not set -# CONFIG_MAC_FLOPPY is not set -# CONFIG_MAC_SERIAL is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_RAW=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -# CONFIG_SERIAL_PMACZILOG is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S3TRIO is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -# CONFIG_FB_MATROX_G450 is not set -CONFIG_FB_MATROX_G100A=y -CONFIG_FB_MATROX_G100=y -# CONFIG_FB_MATROX_MULTIHEAD is not set -# CONFIG_FB_RADEON_OLD is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=y -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_EXPORTFS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Library routines -# -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_BOOTX_TEXT is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/ml300_defconfig b/arch/ppc/configs/ml300_defconfig new file mode 100644 index 00000000000..4a33aca948c --- /dev/null +++ b/arch/ppc/configs/ml300_defconfig @@ -0,0 +1,739 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc1 +# Wed Jan 18 00:49:20 2006 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_LBD=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# IBM 4xx options +# +# CONFIG_BUBINGA is not set +# CONFIG_CPCI405 is not set +# CONFIG_EP405 is not set +# CONFIG_REDWOOD_5 is not set +# CONFIG_REDWOOD_6 is not set +# CONFIG_SYCAMORE is not set +# CONFIG_WALNUT is not set +CONFIG_XILINX_ML300=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +CONFIG_XILINX_VIRTEX=y +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PPC4xx_DMA is not set +CONFIG_PPC_GEN550=y +CONFIG_UART0_TTYS0=y +# CONFIG_UART0_TTYS1 is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,9600" +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set +# CONFIG_IBM_EMAC is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# IBM 40x options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KGDB is not set +CONFIG_XMON=y +# CONFIG_BDI_SWITCH is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/ml403_defconfig b/arch/ppc/configs/ml403_defconfig new file mode 100644 index 00000000000..fafd2516fa5 --- /dev/null +++ b/arch/ppc/configs/ml403_defconfig @@ -0,0 +1,740 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc1 +# Wed Jan 18 01:11:41 2006 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_LBD=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Processor +# +# CONFIG_6xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +CONFIG_4xx=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# IBM 4xx options +# +# CONFIG_BUBINGA is not set +# CONFIG_CPCI405 is not set +# CONFIG_EP405 is not set +# CONFIG_REDWOOD_5 is not set +# CONFIG_REDWOOD_6 is not set +# CONFIG_SYCAMORE is not set +# CONFIG_WALNUT is not set +# CONFIG_XILINX_ML300 is not set +CONFIG_XILINX_ML403=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +CONFIG_XILINX_VIRTEX=y +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PPC4xx_DMA is not set +CONFIG_PPC_GEN550=y +CONFIG_UART0_TTYS0=y +# CONFIG_UART0_TTYS1 is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_PC_KEYBOARD is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,9600" +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PPC_I8259 is not set +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set +# CONFIG_IBM_EMAC is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# IBM 40x options +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KGDB is not set +CONFIG_XMON=y +# CONFIG_BDI_SWITCH is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/pmac_defconfig b/arch/ppc/configs/pmac_defconfig deleted file mode 100644 index a2db8b541c9..00000000000 --- a/arch/ppc/configs/pmac_defconfig +++ /dev/null @@ -1,1591 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc3 -# Wed Jul 13 14:13:13 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -# CONFIG_E500 is not set -CONFIG_PPC_FPU=y -CONFIG_ALTIVEC=y -CONFIG_TAU=y -# CONFIG_TAU_INT is not set -# CONFIG_TAU_AVERAGE is not set -# CONFIG_KEXEC is not set -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=m -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PMAC=y -CONFIG_PPC601_SYNC_FIX=y -CONFIG_PM=y -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_APUS is not set -# CONFIG_KATANA is not set -# CONFIG_WILLOW is not set -# CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_CHESTNUT is not set -# CONFIG_SPRUCE is not set -# CONFIG_HDPU is not set -# CONFIG_EV64260 is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_RADSTONE_PPC7D is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBC82xx is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX8260 is not set -# CONFIG_TQM8260 is not set -# CONFIG_ADS8272 is not set -# CONFIG_PQ2FADS is not set -# CONFIG_LITE5200 is not set -# CONFIG_MPC834x_SYS is not set -CONFIG_PPC_CHRP=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_PREP=y -CONFIG_PPC_OF=y -CONFIG_PPCBUG_NVRAM=y -# CONFIG_SMP is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PROC_DEVICETREE=y -# CONFIG_PREP_RESIDUAL is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM_DEBUG is not set -CONFIG_SOFTWARE_SUSPEND=y -CONFIG_PM_STD_PARTITION="" -# CONFIG_SECCOMP is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -# CONFIG_ISA is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -# CONFIG_PCMCIA_LOAD_CIS is not set -# CONFIG_PCMCIA_IOCTL is not set -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -# CONFIG_PD6729 is not set -# CONFIG_I82092 is not set -# CONFIG_TCIC is not set -CONFIG_PCCARD_NONSTATIC=m - -# -# Advanced setup -# -CONFIG_ADVANCED_OPTIONS=y -CONFIG_HIGHMEM_START=0xfe000000 -# CONFIG_LOWMEM_SIZE_BOOL is not set -CONFIG_LOWMEM_SIZE=0x30000000 -# CONFIG_KERNEL_START_BOOL is not set -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE_BOOL=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -# CONFIG_NSC_FIR is not set -# CONFIG_WINBOND_FIR is not set -# CONFIG_TOSHIBA_FIR is not set -# CONFIG_SMC_IRCC_FIR is not set -# CONFIG_ALI_FIR is not set -# CONFIG_VLSI_FIR is not set -# CONFIG_VIA_FIR is not set -# CONFIG_BT is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -CONFIG_MAC_FLOPPY=m -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_LBD=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=y -CONFIG_BLK_DEV_IDESCSI=y -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_BLINK=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -CONFIG_SCSI_MESH=y -CONFIG_SCSI_MESH_SYNC_RATE=5 -CONFIG_SCSI_MESH_RESET_DELAY_MS=1000 -CONFIG_SCSI_MAC53C94=y - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=m - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y -# CONFIG_IEEE1394_EXPORT_FULL_API is not set - -# -# Device Drivers -# -# CONFIG_IEEE1394_PCILYNX is not set -CONFIG_IEEE1394_OHCI1394=m - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -CONFIG_ADB=y -CONFIG_ADB_CUDA=y -CONFIG_ADB_PMU=y -CONFIG_PMAC_APM_EMU=y -CONFIG_PMAC_MEDIABAY=y -CONFIG_PMAC_BACKLIGHT=y -CONFIG_ADB_MACIO=y -CONFIG_INPUT_ADBHID=y -CONFIG_MAC_EMUMOUSEBTN=y -CONFIG_THERM_WINDTUNNEL=m -CONFIG_THERM_ADT746X=m -# CONFIG_ANSLCD is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACE=y -# CONFIG_MACE_AAUI_PORT is not set -CONFIG_BMAC=y -# CONFIG_HAPPYMEAL is not set -CONFIG_SUNGEM=y -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -CONFIG_APPLE_AIRPORT=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=y -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_AGP_UNINORTH=m -CONFIG_DRM=m -# CONFIG_DRM_TDFX is not set -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_SIS is not set -# CONFIG_DRM_VIA is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_HYDRA is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_KEYWEST=m -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -CONFIG_FB_CONTROL=y -CONFIG_FB_PLATINUM=y -CONFIG_FB_VALKYRIE=y -CONFIG_FB_CT65550=y -# CONFIG_FB_ASILIANT is not set -CONFIG_FB_IMSTT=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -# CONFIG_FB_MATROX_I2C is not set -# CONFIG_FB_MATROX_MULTIHEAD is not set -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -CONFIG_FB_ATY128=y -CONFIG_FB_ATY=y -CONFIG_FB_ATY_CT=y -CONFIG_FB_ATY_GENERIC_LCD=y -# CONFIG_FB_ATY_XL_INIT is not set -CONFIG_FB_ATY_GX=y -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=y -CONFIG_FB_3DFX_ACCEL=y -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_DEVICE=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_DMASOUND_PMAC=m -CONFIG_DMASOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_DUMMY=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# PCI devices -# -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set - -# -# ALSA PowerMac devices -# -CONFIG_SND_POWERMAC=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_USX2Y=m - -# -# PCMCIA devices -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -CONFIG_USB_SERIAL_VISOR=m -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y -CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m - -# -# Library routines -# -CONFIG_CRC_CCITT=y -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_XMON is not set -# CONFIG_BDI_SWITCH is not set -CONFIG_BOOTX_TEXT=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/power3_defconfig b/arch/ppc/configs/power3_defconfig deleted file mode 100644 index a1ef929bca5..00000000000 --- a/arch/ppc/configs/power3_defconfig +++ /dev/null @@ -1,1035 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -# CONFIG_STANDALONE is not set - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_HOTPLUG is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -CONFIG_POWER3=y -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_CPU_FREQ is not set -CONFIG_PPC64BRIDGE=y -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_CHRP=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_PREP=y -CONFIG_PPC_OF=y -CONFIG_PPCBUG_NVRAM=y -CONFIG_SMP=y -# CONFIG_IRQ_ALL_CPUS is not set -CONFIG_NR_CPUS=32 -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PROC_DEVICETREE=y -CONFIG_PPC_RTAS=y -# CONFIG_PREP_RESIDUAL is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -CONFIG_ISA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y - -# -# Advanced setup -# -CONFIG_ADVANCED_OPTIONS=y -# CONFIG_HIGHMEM_START_BOOL is not set -CONFIG_HIGHMEM_START=0xfe000000 -# CONFIG_LOWMEM_SIZE_BOOL is not set -CONFIG_LOWMEM_SIZE=0x30000000 -# CONFIG_KERNEL_START_BOOL is not set -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE_BOOL=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_LBD=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C406A is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=y -# CONFIG_MD_MULTIPATH is not set -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=y - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_ADB is not set -# CONFIG_ADB_CUDA is not set -# CONFIG_ADB_PMU is not set -# CONFIG_MAC_FLOPPY is not set -# CONFIG_MAC_SERIAL is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_E100_NAPI is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -CONFIG_GAMEPORT=m -CONFIG_SOUND_GAMEPORT=m -# CONFIG_GAMEPORT_NS558 is not set -# CONFIG_GAMEPORT_L4 is not set -# CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set -# CONFIG_GAMEPORT_FM801 is not set -# CONFIG_GAMEPORT_CS461x is not set -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=y - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_HYDRA is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_KEYWEST is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S3TRIO is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -# CONFIG_FB_MATROX_G450 is not set -CONFIG_FB_MATROX_G100A=y -CONFIG_FB_MATROX_G100=y -CONFIG_FB_MATROX_I2C=y -# CONFIG_FB_MATROX_MAVEN is not set -CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=y -# CONFIG_DMASOUND_PMAC is not set - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_DUMMY=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ISA devices -# -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_CS4231 is not set -CONFIG_SND_CS4232=m -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_WAVEFRONT is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_SGALAXY is not set -# CONFIG_SND_SSCAPE is not set - -# -# PCI devices -# -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -CONFIG_SND_CS46XX=m -# CONFIG_SND_CS46XX_NEW_DSP is not set -CONFIG_SND_CS4281=m -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VX222 is not set - -# -# ALSA PowerMac devices -# -# CONFIG_SND_POWERMAC is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Library routines -# -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -CONFIG_BOOTX_TEXT=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -# CONFIG_CRYPTO_SERPENT is not set -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set diff --git a/arch/ppc/configs/common_defconfig b/arch/ppc/configs/prep_defconfig index 4d33bee23a8..4d33bee23a8 100644 --- a/arch/ppc/configs/common_defconfig +++ b/arch/ppc/configs/prep_defconfig diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index e399bbb969a..466437f4bcb 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -1,48 +1,24 @@ # # Makefile for the linux kernel. # -ifneq ($(CONFIG_PPC_MERGE),y) - extra-$(CONFIG_PPC_STD_MMU) := head.o extra-$(CONFIG_40x) := head_4xx.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o -extra-$(CONFIG_6xx) += idle_6xx.o extra-y += vmlinux.lds -obj-y := entry.o traps.o idle.o time.o misc.o \ +obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o -obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o -obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o -obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o +obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o -obj-$(CONFIG_TAU) += temp.o -ifndef CONFIG_E200 -obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o -endif obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o ifndef CONFIG_MATH_EMULATION obj-$(CONFIG_8xx) += softemu8xx.o endif - -# These are here while we do the architecture merge - -else -obj-y := idle.o -obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o -obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o -obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o -obj-$(CONFIG_KGDB) += ppc-stub.o -obj-$(CONFIG_TAU) += temp.o -ifndef CONFIG_E200 -obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o -endif -endif diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S deleted file mode 100644 index 55ed7716636..00000000000 --- a/arch/ppc/kernel/cpu_setup_6xx.S +++ /dev/null @@ -1,474 +0,0 @@ -/* - * This file contains low level CPU setup functions. - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/cache.h> - -_GLOBAL(__setup_cpu_603) - b setup_common_caches -_GLOBAL(__setup_cpu_604) - mflr r4 - bl setup_common_caches - bl setup_604_hid0 - mtlr r4 - blr -_GLOBAL(__setup_cpu_750) - mflr r4 - bl __init_fpu_registers - bl setup_common_caches - bl setup_750_7400_hid0 - mtlr r4 - blr -_GLOBAL(__setup_cpu_750cx) - mflr r4 - bl __init_fpu_registers - bl setup_common_caches - bl setup_750_7400_hid0 - bl setup_750cx - mtlr r4 - blr -_GLOBAL(__setup_cpu_750fx) - mflr r4 - bl __init_fpu_registers - bl setup_common_caches - bl setup_750_7400_hid0 - bl setup_750fx - mtlr r4 - blr -_GLOBAL(__setup_cpu_7400) - mflr r4 - bl __init_fpu_registers - bl setup_7400_workarounds - bl setup_common_caches - bl setup_750_7400_hid0 - mtlr r4 - blr -_GLOBAL(__setup_cpu_7410) - mflr r4 - bl __init_fpu_registers - bl setup_7410_workarounds - bl setup_common_caches - bl setup_750_7400_hid0 - li r3,0 - mtspr SPRN_L2CR2,r3 - mtlr r4 - blr -_GLOBAL(__setup_cpu_745x) - mflr r4 - bl setup_common_caches - bl setup_745x_specifics - mtlr r4 - blr - -/* Enable caches for 603's, 604, 750 & 7400 */ -setup_common_caches: - mfspr r11,SPRN_HID0 - andi. r0,r11,HID0_DCE - ori r11,r11,HID0_ICE|HID0_DCE - ori r8,r11,HID0_ICFI - bne 1f /* don't invalidate the D-cache */ - ori r8,r8,HID0_DCI /* unless it wasn't enabled */ -1: sync - mtspr SPRN_HID0,r8 /* enable and invalidate caches */ - sync - mtspr SPRN_HID0,r11 /* enable caches */ - sync - isync - blr - -/* 604, 604e, 604ev, ... - * Enable superscalar execution & branch history table - */ -setup_604_hid0: - mfspr r11,SPRN_HID0 - ori r11,r11,HID0_SIED|HID0_BHTE - ori r8,r11,HID0_BTCD - sync - mtspr SPRN_HID0,r8 /* flush branch target address cache */ - sync /* on 604e/604r */ - mtspr SPRN_HID0,r11 - sync - isync - blr - -/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some - * erratas we work around here. - * Moto MPC710CE.pdf describes them, those are errata - * #3, #4 and #5 - * Note that we assume the firmware didn't choose to - * apply other workarounds (there are other ones documented - * in the .pdf). It appear that Apple firmware only works - * around #3 and with the same fix we use. We may want to - * check if the CPU is using 60x bus mode in which case - * the workaround for errata #4 is useless. Also, we may - * want to explicitely clear HID0_NOPDST as this is not - * needed once we have applied workaround #5 (though it's - * not set by Apple's firmware at least). - */ -setup_7400_workarounds: - mfpvr r3 - rlwinm r3,r3,0,20,31 - cmpwi 0,r3,0x0207 - ble 1f - blr -setup_7410_workarounds: - mfpvr r3 - rlwinm r3,r3,0,20,31 - cmpwi 0,r3,0x0100 - bnelr -1: - mfspr r11,SPRN_MSSSR0 - /* Errata #3: Set L1OPQ_SIZE to 0x10 */ - rlwinm r11,r11,0,9,6 - oris r11,r11,0x0100 - /* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */ - oris r11,r11,0x0002 - /* Errata #5: Set DRLT_SIZE to 0x01 */ - rlwinm r11,r11,0,5,2 - oris r11,r11,0x0800 - sync - mtspr SPRN_MSSSR0,r11 - sync - isync - blr - -/* 740/750/7400/7410 - * Enable Store Gathering (SGE), Address Brodcast (ABE), - * Branch History Table (BHTE), Branch Target ICache (BTIC) - * Dynamic Power Management (DPM), Speculative (SPD) - * Clear Instruction cache throttling (ICTC) - */ -setup_750_7400_hid0: - mfspr r11,SPRN_HID0 - ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC - oris r11,r11,HID0_DPM@h -BEGIN_FTR_SECTION - xori r11,r11,HID0_BTIC -END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) -BEGIN_FTR_SECTION - xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ -END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) - li r3,HID0_SPD - andc r11,r11,r3 /* clear SPD: enable speculative */ - li r3,0 - mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ - isync - mtspr SPRN_HID0,r11 - sync - isync - blr - -/* 750cx specific - * Looks like we have to disable NAP feature for some PLL settings... - * (waiting for confirmation) - */ -setup_750cx: - mfspr r10, SPRN_HID1 - rlwinm r10,r10,4,28,31 - cmpwi cr0,r10,7 - cmpwi cr1,r10,9 - cmpwi cr2,r10,11 - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - cror 4*cr0+eq,4*cr0+eq,4*cr2+eq - bnelr - lwz r6,CPU_SPEC_FEATURES(r5) - li r7,CPU_FTR_CAN_NAP - andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) - blr - -/* 750fx specific - */ -setup_750fx: - blr - -/* MPC 745x - * Enable Store Gathering (SGE), Branch Folding (FOLD) - * Branch History Table (BHTE), Branch Target ICache (BTIC) - * Dynamic Power Management (DPM), Speculative (SPD) - * Ensure our data cache instructions really operate. - * Timebase has to be running or we wouldn't have made it here, - * just ensure we don't disable it. - * Clear Instruction cache throttling (ICTC) - * Enable L2 HW prefetch - */ -setup_745x_specifics: - /* We check for the presence of an L3 cache setup by - * the firmware. If any, we disable NAP capability as - * it's known to be bogus on rev 2.1 and earlier - */ - mfspr r11,SPRN_L3CR - andis. r11,r11,L3CR_L3E@h - beq 1f - lwz r6,CPU_SPEC_FEATURES(r5) - andi. r0,r6,CPU_FTR_L3_DISABLE_NAP - beq 1f - li r7,CPU_FTR_CAN_NAP - andc r6,r6,r7 - stw r6,CPU_SPEC_FEATURES(r5) -1: - mfspr r11,SPRN_HID0 - - /* All of the bits we have to set..... - */ - ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE - ori r11,r11,HID0_LRSTK | HID0_BTIC - oris r11,r11,HID0_DPM@h -BEGIN_FTR_SECTION - xori r11,r11,HID0_BTIC -END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC) -BEGIN_FTR_SECTION - xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */ -END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM) - - /* All of the bits we have to clear.... - */ - li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI - andc r11,r11,r3 /* clear SPD: enable speculative */ - li r3,0 - - mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */ - isync - mtspr SPRN_HID0,r11 - sync - isync - - /* Enable L2 HW prefetch, if L2 is enabled - */ - mfspr r3,SPRN_L2CR - andis. r3,r3,L2CR_L2E@h - beqlr - mfspr r3,SPRN_MSSCR0 - ori r3,r3,3 - sync - mtspr SPRN_MSSCR0,r3 - sync - isync - blr - -/* - * Initialize the FPU registers. This is needed to work around an errata - * in some 750 cpus where using a not yet initialized FPU register after - * power on reset may hang the CPU - */ -_GLOBAL(__init_fpu_registers) - mfmsr r10 - ori r11,r10,MSR_FP - mtmsr r11 - isync - addis r9,r3,empty_zero_page@ha - addi r9,r9,empty_zero_page@l - REST_32FPRS(0,r9) - sync - mtmsr r10 - isync - blr - - -/* Definitions for the table use to save CPU states */ -#define CS_HID0 0 -#define CS_HID1 4 -#define CS_HID2 8 -#define CS_MSSCR0 12 -#define CS_MSSSR0 16 -#define CS_ICTRL 20 -#define CS_LDSTCR 24 -#define CS_LDSTDB 28 -#define CS_SIZE 32 - - .data - .balign L1_CACHE_BYTES -cpu_state_storage: - .space CS_SIZE - .balign L1_CACHE_BYTES,0 - .text - -/* Called in normal context to backup CPU 0 state. This - * does not include cache settings. This function is also - * called for machine sleep. This does not include the MMU - * setup, BATs, etc... but rather the "special" registers - * like HID0, HID1, MSSCR0, etc... - */ -_GLOBAL(__save_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - lis r5,cpu_state_storage@h - ori r5,r5,cpu_state_storage@l - - /* Save HID0 (common to all CONFIG_6xx cpus) */ - mfspr r3,SPRN_HID0 - stw r3,CS_HID0(r5) - - /* Now deal with CPU type dependent registers */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmplwi cr0,r3,0x8000 /* 7450 */ - cmplwi cr1,r3,0x000c /* 7400 */ - cmplwi cr2,r3,0x800c /* 7410 */ - cmplwi cr3,r3,0x8001 /* 7455 */ - cmplwi cr4,r3,0x8002 /* 7457 */ - cmplwi cr5,r3,0x8003 /* 7447A */ - cmplwi cr6,r3,0x7000 /* 750FX */ - cmplwi cr7,r3,0x8004 /* 7448 */ - /* cr1 is 7400 || 7410 */ - cror 4*cr1+eq,4*cr1+eq,4*cr2+eq - /* cr0 is 74xx */ - cror 4*cr0+eq,4*cr0+eq,4*cr3+eq - cror 4*cr0+eq,4*cr0+eq,4*cr4+eq - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - cror 4*cr0+eq,4*cr0+eq,4*cr5+eq - cror 4*cr0+eq,4*cr0+eq,4*cr7+eq - bne 1f - /* Backup 74xx specific regs */ - mfspr r4,SPRN_MSSCR0 - stw r4,CS_MSSCR0(r5) - mfspr r4,SPRN_MSSSR0 - stw r4,CS_MSSSR0(r5) - beq cr1,1f - /* Backup 745x specific registers */ - mfspr r4,SPRN_HID1 - stw r4,CS_HID1(r5) - mfspr r4,SPRN_ICTRL - stw r4,CS_ICTRL(r5) - mfspr r4,SPRN_LDSTCR - stw r4,CS_LDSTCR(r5) - mfspr r4,SPRN_LDSTDB - stw r4,CS_LDSTDB(r5) -1: - bne cr6,1f - /* Backup 750FX specific registers */ - mfspr r4,SPRN_HID1 - stw r4,CS_HID1(r5) - /* If rev 2.x, backup HID2 */ - mfspr r3,SPRN_PVR - andi. r3,r3,0xff00 - cmpwi cr0,r3,0x0200 - bne 1f - mfspr r4,SPRN_HID2 - stw r4,CS_HID2(r5) -1: - mtcr r7 - blr - -/* Called with no MMU context (typically MSR:IR/DR off) to - * restore CPU state as backed up by the previous - * function. This does not include cache setting - */ -_GLOBAL(__restore_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - lis r5,(cpu_state_storage-KERNELBASE)@h - ori r5,r5,cpu_state_storage@l - - /* Restore HID0 */ - lwz r3,CS_HID0(r5) - sync - isync - mtspr SPRN_HID0,r3 - sync - isync - - /* Now deal with CPU type dependent registers */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmplwi cr0,r3,0x8000 /* 7450 */ - cmplwi cr1,r3,0x000c /* 7400 */ - cmplwi cr2,r3,0x800c /* 7410 */ - cmplwi cr3,r3,0x8001 /* 7455 */ - cmplwi cr4,r3,0x8002 /* 7457 */ - cmplwi cr5,r3,0x8003 /* 7447A */ - cmplwi cr6,r3,0x7000 /* 750FX */ - cmplwi cr7,r3,0x8004 /* 7448 */ - /* cr1 is 7400 || 7410 */ - cror 4*cr1+eq,4*cr1+eq,4*cr2+eq - /* cr0 is 74xx */ - cror 4*cr0+eq,4*cr0+eq,4*cr3+eq - cror 4*cr0+eq,4*cr0+eq,4*cr4+eq - cror 4*cr0+eq,4*cr0+eq,4*cr1+eq - cror 4*cr0+eq,4*cr0+eq,4*cr5+eq - cror 4*cr0+eq,4*cr0+eq,4*cr7+eq - bne 2f - /* Restore 74xx specific regs */ - lwz r4,CS_MSSCR0(r5) - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lwz r4,CS_MSSSR0(r5) - sync - mtspr SPRN_MSSSR0,r4 - sync - isync - bne cr2,1f - /* Clear 7410 L2CR2 */ - li r4,0 - mtspr SPRN_L2CR2,r4 -1: beq cr1,2f - /* Restore 745x specific registers */ - lwz r4,CS_HID1(r5) - sync - mtspr SPRN_HID1,r4 - isync - sync - lwz r4,CS_ICTRL(r5) - sync - mtspr SPRN_ICTRL,r4 - isync - sync - lwz r4,CS_LDSTCR(r5) - sync - mtspr SPRN_LDSTCR,r4 - isync - sync - lwz r4,CS_LDSTDB(r5) - sync - mtspr SPRN_LDSTDB,r4 - isync - sync -2: bne cr6,1f - /* Restore 750FX specific registers - * that is restore HID2 on rev 2.x and PLL config & switch - * to PLL 0 on all - */ - /* If rev 2.x, restore HID2 with low voltage bit cleared */ - mfspr r3,SPRN_PVR - andi. r3,r3,0xff00 - cmpwi cr0,r3,0x0200 - bne 4f - lwz r4,CS_HID2(r5) - rlwinm r4,r4,0,19,17 - mtspr SPRN_HID2,r4 - sync -4: - lwz r4,CS_HID1(r5) - rlwinm r5,r4,0,16,14 - mtspr SPRN_HID1,r5 - /* Wait for PLL to stabilize */ - mftbl r5 -3: mftbl r6 - sub r6,r6,r5 - cmplwi cr0,r6,10000 - ble 3b - /* Setup final PLL */ - mtspr SPRN_HID1,r4 -1: - mtcr r7 - blr - diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c index 685fd0defe2..61465ec88bc 100644 --- a/arch/ppc/kernel/dma-mapping.c +++ b/arch/ppc/kernel/dma-mapping.c @@ -223,6 +223,8 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); struct page *end = page + (1 << order); + split_page(page, order); + /* * Set the "dma handle" */ @@ -231,7 +233,6 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) do { BUG_ON(!pte_none(*pte)); - set_page_count(page, 1); SetPageReserved(page); set_pte_at(&init_mm, vaddr, pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); @@ -244,7 +245,6 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) * Free the otherwise unused pages. */ while (page < end) { - set_page_count(page, 1); __free_page(page); page++; } diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 3a281597848..5891ecbdc70 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -135,10 +135,10 @@ transfer_to_handler: mfspr r11,SPRN_HID0 mtcr r11 BEGIN_FTR_SECTION - bt- 8,power_save_6xx_restore /* Check DOZE */ + bt- 8,4f /* Check DOZE */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) BEGIN_FTR_SECTION - bt- 9,power_save_6xx_restore /* Check NAP */ + bt- 9,4f /* Check NAP */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont @@ -157,6 +157,10 @@ transfer_to_handler_cont: SYNC RFI /* jump to handler, enable MMU */ +#ifdef CONFIG_6xx +4: b power_save_6xx_restore +#endif + /* * On kernel stack overflow, load up an initial stack pointer * and call StackOverflow(regs), which should not return. @@ -926,55 +930,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) b 4b .comm ee_restarts,4 - -/* - * PROM code for specific machines follows. Put it - * here so it's easy to add arch-specific sections later. - * -- Cort - */ -#ifdef CONFIG_PPC_OF -/* - * On CHRP, the Run-Time Abstraction Services (RTAS) have to be - * called with the MMU off. - */ -_GLOBAL(enter_rtas) - stwu r1,-INT_FRAME_SIZE(r1) - mflr r0 - stw r0,INT_FRAME_SIZE+4(r1) - lis r4,rtas_data@ha - lwz r4,rtas_data@l(r4) - lis r6,1f@ha /* physical return address for rtas */ - addi r6,r6,1f@l - tophys(r6,r6) - tophys(r7,r1) - lis r8,rtas_entry@ha - lwz r8,rtas_entry@l(r8) - mfmsr r9 - stw r9,8(r1) - LOAD_MSR_KERNEL(r0,MSR_KERNEL) - SYNC /* disable interrupts so SRR0/1 */ - MTMSRD(r0) /* don't get trashed */ - li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR) - mtlr r6 - CLR_TOP32(r7) - mtspr SPRN_SPRG2,r7 - mtspr SPRN_SRR0,r8 - mtspr SPRN_SRR1,r9 - RFI -1: tophys(r9,r1) - lwz r8,INT_FRAME_SIZE+4(r9) /* get return address */ - lwz r9,8(r9) /* original msr value */ - FIX_SRR1(r9,r0) - addi r1,r1,INT_FRAME_SIZE - li r0,0 - mtspr SPRN_SPRG2,r0 - mtspr SPRN_SRR0,r8 - mtspr SPRN_SRR1,r9 - RFI /* return to caller */ - - .globl machine_check_in_rtas -machine_check_in_rtas: - twi 31,0,0 - /* XXX load up BATs and panic */ - -#endif /* CONFIG_PPC_OF */ diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index 53ea845fb91..01303efedda 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -37,19 +37,6 @@ #include <asm/amigappc.h> #endif -#ifdef CONFIG_PPC64BRIDGE -#define LOAD_BAT(n, reg, RA, RB) \ - ld RA,(n*32)+0(reg); \ - ld RB,(n*32)+8(reg); \ - mtspr SPRN_IBAT##n##U,RA; \ - mtspr SPRN_IBAT##n##L,RB; \ - ld RA,(n*32)+16(reg); \ - ld RB,(n*32)+24(reg); \ - mtspr SPRN_DBAT##n##U,RA; \ - mtspr SPRN_DBAT##n##L,RB; \ - -#else /* CONFIG_PPC64BRIDGE */ - /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ #define LOAD_BAT(n, reg, RA, RB) \ /* see the comment for clear_bats() -- Cort */ \ @@ -66,7 +53,6 @@ mtspr SPRN_DBAT##n##U,RA; \ mtspr SPRN_DBAT##n##L,RB; \ 1: -#endif /* CONFIG_PPC64BRIDGE */ .text .stabs "arch/ppc/kernel/",N_SO,0,0,0f @@ -129,11 +115,6 @@ _start: .globl __start __start: -/* - * We have to do any OF calls before we map ourselves to KERNELBASE, - * because OF may have I/O devices mapped into that area - * (particularly on CHRP). - */ mr r31,r3 /* save parameters */ mr r30,r4 mr r29,r5 @@ -148,14 +129,6 @@ __start: */ bl early_init -/* - * On POWER4, we first need to tweak some CPU configuration registers - * like real mode cache inhibit or exception base - */ -#ifdef CONFIG_POWER4 - bl __970_cpu_preinit -#endif /* CONFIG_POWER4 */ - #ifdef CONFIG_APUS /* On APUS the __va/__pa constants need to be set to the correct * values before continuing. @@ -169,7 +142,6 @@ __start: */ bl mmu_off __after_mmu_off: -#ifndef CONFIG_POWER4 bl clear_bats bl flush_tlbs @@ -177,10 +149,6 @@ __after_mmu_off: #if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) bl setup_disp_bat #endif -#else /* CONFIG_POWER4 */ - bl reloc_offset - bl initial_mm_power4 -#endif /* CONFIG_POWER4 */ /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -192,18 +160,11 @@ __after_mmu_off: bl reloc_offset bl init_idle_6xx #endif /* CONFIG_6xx */ -#ifdef CONFIG_POWER4 - bl reloc_offset - bl init_idle_power4 -#endif /* CONFIG_POWER4 */ #ifndef CONFIG_APUS /* * We need to run with _start at physical address 0. - * On CHRP, we are loaded at 0x10000 since OF on CHRP uses - * the exception vectors at 0 (and therefore this copy - * overwrites OF's exception vectors with our own). * If the MMU is already turned on, we copy stuff to KERNELBASE, * otherwise we copy it to 0. */ @@ -358,51 +319,19 @@ i##n: \ #endif /* Machine check */ -/* - * On CHRP, this is complicated by the fact that we could get a - * machine check inside RTAS, and we have no guarantee that certain - * critical registers will have the values we expect. The set of - * registers that might have bad values includes all the GPRs - * and all the BATs. We indicate that we are in RTAS by putting - * a non-zero value, the address of the exception frame to use, - * in SPRG2. The machine check handler checks SPRG2 and uses its - * value if it is non-zero. If we ever needed to free up SPRG2, - * we could use a field in the thread_info or thread_struct instead. - * (Other exception handlers assume that r1 is a valid kernel stack - * pointer when we take an exception from supervisor mode.) - * -- paulus. - */ . = 0x200 mtspr SPRN_SPRG0,r10 mtspr SPRN_SPRG1,r11 mfcr r10 -#ifdef CONFIG_PPC_CHRP - mfspr r11,SPRN_SPRG2 - cmpwi 0,r11,0 - bne 7f -#endif /* CONFIG_PPC_CHRP */ EXCEPTION_PROLOG_1 7: EXCEPTION_PROLOG_2 addi r3,r1,STACK_FRAME_OVERHEAD -#ifdef CONFIG_PPC_CHRP - mfspr r4,SPRN_SPRG2 - cmpwi cr1,r4,0 - bne cr1,1f -#endif EXC_XFER_STD(0x200, machine_check_exception) -#ifdef CONFIG_PPC_CHRP -1: b machine_check_in_rtas -#endif /* Data access exception. */ . = 0x300 -#ifdef CONFIG_PPC64BRIDGE - b DataAccess -DataAccessCont: -#else DataAccess: EXCEPTION_PROLOG -#endif /* CONFIG_PPC64BRIDGE */ mfspr r10,SPRN_DSISR andis. r0,r10,0xa470 /* weird error? */ bne 1f /* if not, try to put a PTE */ @@ -414,21 +343,10 @@ DataAccess: mfspr r4,SPRN_DAR EXC_XFER_EE_LITE(0x300, handle_page_fault) -#ifdef CONFIG_PPC64BRIDGE -/* SLB fault on data access. */ - . = 0x380 - b DataSegment -#endif /* CONFIG_PPC64BRIDGE */ - /* Instruction access exception. */ . = 0x400 -#ifdef CONFIG_PPC64BRIDGE - b InstructionAccess -InstructionAccessCont: -#else InstructionAccess: EXCEPTION_PROLOG -#endif /* CONFIG_PPC64BRIDGE */ andis. r0,r9,0x4000 /* no pte found? */ beq 1f /* if so, try to put a PTE */ li r3,0 /* into the hash table */ @@ -438,12 +356,6 @@ InstructionAccess: mr r5,r9 EXC_XFER_EE_LITE(0x400, handle_page_fault) -#ifdef CONFIG_PPC64BRIDGE -/* SLB fault on instruction access. */ - . = 0x480 - b InstructionSegment -#endif /* CONFIG_PPC64BRIDGE */ - /* External interrupt */ EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) @@ -708,15 +620,9 @@ DataStoreTLBMiss: EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE) EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE) EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) -#ifdef CONFIG_POWER4 - EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1700, Trap_17, altivec_assist_exception, EXC_XFER_EE) - EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD) -#else /* !CONFIG_POWER4 */ EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE) EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD) EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) -#endif /* CONFIG_POWER4 */ EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE) @@ -754,28 +660,6 @@ AltiVecUnavailable: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) -#ifdef CONFIG_PPC64BRIDGE -DataAccess: - EXCEPTION_PROLOG - b DataAccessCont - -InstructionAccess: - EXCEPTION_PROLOG - b InstructionAccessCont - -DataSegment: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - mfspr r4,SPRN_DAR - stw r4,_DAR(r11) - EXC_XFER_STD(0x380, unknown_exception) - -InstructionSegment: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_STD(0x480, unknown_exception) -#endif /* CONFIG_PPC64BRIDGE */ - #ifdef CONFIG_ALTIVEC /* Note that the AltiVec support is closely modeled after the FP * support. Changes to one are likely to be applicable to the @@ -1048,13 +932,6 @@ __secondary_start_pmac_0: .globl __secondary_start __secondary_start: -#ifdef CONFIG_PPC64BRIDGE - mfmsr r0 - clrldi r0,r0,1 /* make sure it's in 32-bit mode */ - SYNC - MTMSRD(r0) - isync -#endif /* Copy some CPU settings from CPU 0 */ bl __restore_cpu_setup @@ -1065,10 +942,6 @@ __secondary_start: lis r3,-KERNELBASE@h bl init_idle_6xx #endif /* CONFIG_6xx */ -#ifdef CONFIG_POWER4 - lis r3,-KERNELBASE@h - bl init_idle_power4 -#endif /* CONFIG_POWER4 */ /* get current_thread_info and current */ lis r1,secondary_ti@ha @@ -1109,12 +982,12 @@ __secondary_start: * Those generic dummy functions are kept for CPUs not * included in CONFIG_6xx */ -#if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) +#if !defined(CONFIG_6xx) _GLOBAL(__save_cpu_setup) blr _GLOBAL(__restore_cpu_setup) blr -#endif /* !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) */ +#endif /* !defined(CONFIG_6xx) */ /* @@ -1132,11 +1005,6 @@ load_up_mmu: tophys(r6,r6) lwz r6,_SDR1@l(r6) mtspr SPRN_SDR1,r6 -#ifdef CONFIG_PPC64BRIDGE - /* clear the ASR so we only use the pseudo-segment registers. */ - li r6,0 - mtasr r6 -#endif /* CONFIG_PPC64BRIDGE */ li r0,16 /* load up segment register values */ mtctr r0 /* for context 0 */ lis r3,0x2000 /* Ku = 1, VSID = 0 */ @@ -1145,7 +1013,7 @@ load_up_mmu: addi r3,r3,0x111 /* increment VSID */ addis r4,r4,0x1000 /* address of next segment */ bdnz 3b -#ifndef CONFIG_POWER4 + /* Load the BAT registers with the values set up by MMU_init. MMU_init takes care of whether we're on a 601 or not. */ mfpvr r3 @@ -1158,7 +1026,7 @@ load_up_mmu: LOAD_BAT(1,r3,r4,r5) LOAD_BAT(2,r3,r4,r5) LOAD_BAT(3,r3,r4,r5) -#endif /* CONFIG_POWER4 */ + blr /* @@ -1269,9 +1137,6 @@ _GLOBAL(set_context) li r4,0 isync 3: -#ifdef CONFIG_PPC64BRIDGE - slbie r4 -#endif /* CONFIG_PPC64BRIDGE */ mtsrin r3,r4 addi r3,r3,0x111 /* next VSID */ rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */ @@ -1358,7 +1223,6 @@ mmu_off: sync RFI -#ifndef CONFIG_POWER4 /* * Use the first pair of BAT registers to map the 1st 16MB * of RAM to KERNELBASE. From this point on we can't safely @@ -1366,7 +1230,6 @@ mmu_off: */ initial_bats: lis r11,KERNELBASE@h -#ifndef CONFIG_PPC64BRIDGE mfspr r9,SPRN_PVR rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ cmpwi 0,r9,1 @@ -1381,7 +1244,6 @@ initial_bats: mtspr SPRN_IBAT1L,r10 isync blr -#endif /* CONFIG_PPC64BRIDGE */ 4: tophys(r8,r11) #ifdef CONFIG_SMP @@ -1395,11 +1257,6 @@ initial_bats: ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */ #endif /* CONFIG_APUS */ -#ifdef CONFIG_PPC64BRIDGE - /* clear out the high 32 bits in the BAT */ - clrldi r11,r11,32 - clrldi r8,r8,32 -#endif /* CONFIG_PPC64BRIDGE */ mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */ mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */ mtspr SPRN_IBAT0L,r8 @@ -1432,38 +1289,6 @@ setup_disp_bat: #endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */ -#else /* CONFIG_POWER4 */ -/* - * Load up the SDR1 and segment register values now - * since we don't have the BATs. - * Also make sure we are running in 32-bit mode. - */ - -initial_mm_power4: - addis r14,r3,_SDR1@ha /* get the value from _SDR1 */ - lwz r14,_SDR1@l(r14) /* assume hash table below 4GB */ - mtspr SPRN_SDR1,r14 - slbia - lis r4,0x2000 /* set pseudo-segment reg 12 */ - ori r5,r4,0x0ccc - mtsr 12,r5 -#if 0 - ori r5,r4,0x0888 /* set pseudo-segment reg 8 */ - mtsr 8,r5 /* (for access to serial port) */ -#endif -#ifdef CONFIG_BOOTX_TEXT - ori r5,r4,0x0999 /* set pseudo-segment reg 9 */ - mtsr 9,r5 /* (for access to screen) */ -#endif - mfmsr r0 - clrldi r0,r0,1 - sync - mtmsr r0 - isync - blr - -#endif /* CONFIG_POWER4 */ - #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 677c571aa27..0d8b88219d3 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/head_44x.S - * * Kernel execution entry point code. * * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org> diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S index c1e89ad0684..ec53c7d65f2 100644 --- a/arch/ppc/kernel/head_8xx.S +++ b/arch/ppc/kernel/head_8xx.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/except_8xx.S - * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S index 8d60fa99fc4..dd86bbed762 100644 --- a/arch/ppc/kernel/head_fsl_booke.S +++ b/arch/ppc/kernel/head_fsl_booke.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/head_fsl_booke.S - * * Kernel execution entry point code. * * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org> @@ -316,6 +314,7 @@ skpinv: addi r6,r6,1 /* Increment */ */ lis r2,DBCR0_IDM@h mtspr SPRN_DBCR0,r2 + isync /* clear any residual debug events */ li r2,-1 mtspr SPRN_DBSR,r2 @@ -1002,12 +1001,15 @@ _GLOBAL(giveup_fpu) _GLOBAL(abort) li r13,0 mtspr SPRN_DBCR0,r13 /* disable all debug events */ + isync mfmsr r13 ori r13,r13,MSR_DE@l /* Enable Debug Events */ mtmsr r13 + isync mfspr r13,SPRN_DBCR0 lis r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h mtspr SPRN_DBCR0,r13 + isync _GLOBAL(set_context) diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c deleted file mode 100644 index 1be3ca5bae4..00000000000 --- a/arch/ppc/kernel/idle.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Idle daemon for PowerPC. Idle daemon will handle any action - * that needs to be taken when the system becomes idle. - * - * Written by Cort Dougan (cort@cs.nmt.edu). Subsequently hacked - * on by Tom Rini, Armin Kuster, Paul Mackerras and others. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/sysctl.h> -#include <linux/cpu.h> - -#include <asm/pgtable.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/cputable.h> -#include <asm/machdep.h> -#include <asm/smp.h> - -void default_idle(void) -{ - void (*powersave)(void); - - powersave = ppc_md.power_save; - - if (!need_resched()) { - if (powersave != NULL) - powersave(); -#ifdef CONFIG_SMP - else { - set_thread_flag(TIF_POLLING_NRFLAG); - while (!need_resched() && - !cpu_is_offline(smp_processor_id())) - barrier(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } -#endif - } -} - -/* - * The body of the idle task. - */ -void cpu_idle(void) -{ - int cpu = smp_processor_id(); - - for (;;) { - while (!need_resched()) { - if (ppc_md.idle != NULL) - ppc_md.idle(); - else - default_idle(); - } - - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx) -/* - * Register the sysctl to set/clear powersave_nap. - */ -extern int powersave_nap; - -static ctl_table powersave_nap_ctl_table[]={ - { - .ctl_name = KERN_PPC_POWERSAVE_NAP, - .procname = "powersave-nap", - .data = &powersave_nap, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec, - }, - { 0, }, -}; -static ctl_table powersave_nap_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, - { 0,}, -}; - -static int __init -register_powersave_nap_sysctl(void) -{ - register_sysctl_table(powersave_nap_sysctl_root, 0); - - return 0; -} - -__initcall(register_powersave_nap_sysctl); -#endif diff --git a/arch/ppc/kernel/idle_6xx.S b/arch/ppc/kernel/idle_6xx.S deleted file mode 100644 index 1a2194cf682..00000000000 --- a/arch/ppc/kernel/idle_6xx.S +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * Make sure no rest of NAP mode remains in HID0, save default - * values for some CPU specific registers. Called with r24 - * containing CPU number and r3 reloc offset - */ -_GLOBAL(init_idle_6xx) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID0 - rlwinm r4,r4,0,10,8 /* Clear NAP */ - mtspr SPRN_HID0, r4 - b 1f -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - blr -1: - slwi r5,r24,2 - add r5,r5,r3 -BEGIN_FTR_SECTION - mfspr r4,SPRN_MSSCR0 - addis r6,r5, nap_save_msscr0@ha - stw r4,nap_save_msscr0@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID1 - addis r6,r5,nap_save_hid1@ha - stw r4,nap_save_hid1@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ -_GLOBAL(ppc6xx_idle) - /* Check if we can nap or doze, put HID0 mask in r3 - */ - lis r3, 0 -BEGIN_FTR_SECTION - lis r3,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) -BEGIN_FTR_SECTION - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beq 1f - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beq 1f - lis r3,HID0_NAP@h -1: -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - cmpwi 0,r3,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Some pre-nap cleanups needed on some CPUs */ - andis. r0,r3,HID0_NAP@h - beq 2f -BEGIN_FTR_SECTION - /* Disable L2 prefetch on some 745x and try to ensure - * L2 prefetch engines are idle. As explained by errata - * text, we can't be sure they are, we just hope very hard - * that well be enough (sic !). At least I noticed Apple - * doesn't even bother doing the dcbf's here... - */ - mfspr r4,SPRN_MSSCR0 - rlwinm r4,r4,0,0,29 - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lis r4,KERNELBASE@h - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -#ifdef DEBUG - lis r6,nap_enter_count@ha - lwz r4,nap_enter_count@l(r6) - addi r4,r4,1 - stw r4,nap_enter_count@l(r6) -#endif -2: -BEGIN_FTR_SECTION - /* Go to low speed mode on some 750FX */ - lis r4,powersave_lowspeed@ha - lwz r4,powersave_lowspeed@l(r4) - cmpwi 0,r4,0 - beq 1f - mfspr r4,SPRN_HID1 - oris r4,r4,0x0001 - mtspr SPRN_HID1,r4 -1: -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - - /* Go to NAP or DOZE now */ - mfspr r4,SPRN_HID0 - lis r5,(HID0_NAP|HID0_SLEEP)@h -BEGIN_FTR_SECTION - oris r5,r5,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - andc r4,r4,r5 - or r4,r4,r3 -BEGIN_FTR_SECTION - oris r4,r4,HID0_DPM@h /* that should be done once for all */ -END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM) - mtspr SPRN_HID0,r4 -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - -/* - * Return from NAP/DOZE mode, restore some CPU specific registers, - * we are called with DR/IR still off and r2 containing physical - * address of current. - */ -_GLOBAL(power_save_6xx_restore) - mfspr r11,SPRN_HID0 - rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */ - cror 4*cr1+eq,4*cr0+eq,4*cr0+eq -BEGIN_FTR_SECTION - rlwinm r11,r11,0,9,7 /* Clear DOZE */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - mtspr SPRN_HID0, r11 - -#ifdef DEBUG - beq cr1,1f - lis r11,(nap_return_count-KERNELBASE)@ha - lwz r9,nap_return_count@l(r11) - addi r9,r9,1 - stw r9,nap_return_count@l(r11) -1: -#endif - - rlwinm r9,r1,0,0,18 - tophys(r9,r9) - lwz r11,TI_CPU(r9) - slwi r11,r11,2 - /* Todo make sure all these are in the same page - * and load r22 (@ha part + CPU offset) only once - */ -BEGIN_FTR_SECTION - beq cr1,1f - addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha - lwz r9,nap_save_msscr0@l(r9) - mtspr SPRN_MSSCR0, r9 - sync - isync -1: -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - addis r9,r11,(nap_save_hid1-KERNELBASE)@ha - lwz r9,nap_save_hid1@l(r9) - mtspr SPRN_HID1, r9 -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - b transfer_to_handler_cont - - .data - -_GLOBAL(nap_save_msscr0) - .space 4*NR_CPUS - -_GLOBAL(nap_save_hid1) - .space 4*NR_CPUS - -_GLOBAL(powersave_nap) - .long 0 -_GLOBAL(powersave_lowspeed) - .long 0 - -#ifdef DEBUG -_GLOBAL(nap_enter_count) - .space 4 -_GLOBAL(nap_return_count) - .space 4 -#endif diff --git a/arch/ppc/kernel/idle_power4.S b/arch/ppc/kernel/idle_power4.S deleted file mode 100644 index cc0d535365c..00000000000 --- a/arch/ppc/kernel/idle_power4.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * So nothing for now. Called with r24 containing CPU number and r3 - * reloc offset - */ - .globl init_idle_power4 -init_idle_power4: - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ - .globl power4_idle -power4_idle: -BEGIN_FTR_SECTION - blr -END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beqlr - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Go to NAP now */ -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - - .globl powersave_nap -powersave_nap: - .long 0 diff --git a/arch/ppc/kernel/l2cr.S b/arch/ppc/kernel/l2cr.S deleted file mode 100644 index d7f4e982b53..00000000000 --- a/arch/ppc/kernel/l2cr.S +++ /dev/null @@ -1,471 +0,0 @@ -/* - L2CR functions - Copyright © 1997-1998 by PowerLogix R & D, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -/* - Thur, Dec. 12, 1998. - - First public release, contributed by PowerLogix. - *********** - Sat, Aug. 7, 1999. - - Terry: Made sure code disabled interrupts before running. (Previously - it was assumed interrupts were already disabled). - - Terry: Updated for tentative G4 support. 4MB of memory is now flushed - instead of 2MB. (Prob. only 3 is necessary). - - Terry: Updated for workaround to HID0[DPM] processor bug - during global invalidates. - *********** - Thu, July 13, 2000. - - Terry: Added isync to correct for an errata. - - 22 August 2001. - - DanM: Finally added the 7450 patch I've had for the past - several months. The L2CR is similar, but I'm going - to assume the user of this functions knows what they - are doing. - - Author: Terry Greeniaus (tgree@phys.ualberta.ca) - Please e-mail updates to this file to me, thanks! -*/ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/cputable.h> -#include <asm/ppc_asm.h> -#include <asm/cache.h> -#include <asm/page.h> - -/* Usage: - - When setting the L2CR register, you must do a few special - things. If you are enabling the cache, you must perform a - global invalidate. If you are disabling the cache, you must - flush the cache contents first. This routine takes care of - doing these things. When first enabling the cache, make sure - you pass in the L2CR you want, as well as passing in the - global invalidate bit set. A global invalidate will only be - performed if the L2I bit is set in applyThis. When enabling - the cache, you should also set the L2E bit in applyThis. If - you want to modify the L2CR contents after the cache has been - enabled, the recommended procedure is to first call - __setL2CR(0) to disable the cache and then call it again with - the new values for L2CR. Examples: - - _setL2CR(0) - disables the cache - _setL2CR(0xB3A04000) - enables my G3 upgrade card: - - L2E set to turn on the cache - - L2SIZ set to 1MB - - L2CLK set to 1:1 - - L2RAM set to pipelined synchronous late-write - - L2I set to perform a global invalidation - - L2OH set to 0.5 nS - - L2DF set because this upgrade card - requires it - - A similar call should work for your card. You need to know - the correct setting for your card and then place them in the - fields I have outlined above. Other fields support optional - features, such as L2DO which caches only data, or L2TS which - causes cache pushes from the L1 cache to go to the L2 cache - instead of to main memory. - -IMPORTANT: - Starting with the 7450, the bits in this register have moved - or behave differently. The Enable, Parity Enable, Size, - and L2 Invalidate are the only bits that have not moved. - The size is read-only for these processors with internal L2 - cache, and the invalidate is a control as well as status. - -- Dan - -*/ -/* - * Summary: this procedure ignores the L2I bit in the value passed in, - * flushes the cache if it was already enabled, always invalidates the - * cache, then enables the cache if the L2E bit is set in the value - * passed in. - * -- paulus. - */ -_GLOBAL(_set_L2CR) - /* Make sure this is a 750 or 7400 chip */ -BEGIN_FTR_SECTION - li r3,-1 - blr -END_FTR_SECTION_IFCLR(CPU_FTR_L2CR) - - mflr r9 - - /* Stop DST streams */ -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - - /* Turn off interrupts and data relocation. */ - mfmsr r7 /* Save MSR in r7 */ - rlwinm r4,r7,0,17,15 - rlwinm r4,r4,0,28,26 /* Turn off DR bit */ - sync - mtmsr r4 - isync - - /* Before we perform the global invalidation, we must disable dynamic - * power management via HID0[DPM] to work around a processor bug where - * DPM can possibly interfere with the state machine in the processor - * that invalidates the L2 cache tags. - */ - mfspr r8,SPRN_HID0 /* Save HID0 in r8 */ - rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ - sync - mtspr SPRN_HID0,r4 /* Disable DPM */ - sync - - /* Get the current enable bit of the L2CR into r4 */ - mfspr r4,SPRN_L2CR - - /* Tweak some bits */ - rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ - rlwinm r3,r3,0,11,9 /* Turn off the invalidate bit */ - rlwinm r3,r3,0,1,31 /* Turn off the enable bit */ - - /* Check to see if we need to flush */ - rlwinm. r4,r4,0,0,0 - beq 2f - - /* Flush the cache. First, read the first 4MB of memory (physical) to - * put new data in the cache. (Actually we only need - * the size of the L2 cache plus the size of the L1 cache, but 4MB will - * cover everything just to be safe). - */ - - /**** Might be a good idea to set L2DO here - to prevent instructions - from getting into the cache. But since we invalidate - the next time we enable the cache it doesn't really matter. - Don't do this unless you accomodate all processor variations. - The bit moved on the 7450..... - ****/ - -BEGIN_FTR_SECTION - /* Disable L2 prefetch on some 745x and try to ensure - * L2 prefetch engines are idle. As explained by errata - * text, we can't be sure they are, we just hope very hard - * that well be enough (sic !). At least I noticed Apple - * doesn't even bother doing the dcbf's here... - */ - mfspr r4,SPRN_MSSCR0 - rlwinm r4,r4,0,0,29 - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lis r4,KERNELBASE@h - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) - - /* TODO: use HW flush assist when available */ - - lis r4,0x0002 - mtctr r4 - li r4,0 -1: - lwzx r0,r0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - isync - - /* Now, flush the first 4MB of memory */ - lis r4,0x0002 - mtctr r4 - li r4,0 - sync -1: - dcbf 0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - -2: - /* Set up the L2CR configuration bits (and switch L2 off) */ - /* CPU errata: Make sure the mtspr below is already in the - * L1 icache - */ - b 20f - .balign L1_CACHE_BYTES -22: - sync - mtspr SPRN_L2CR,r3 - sync - b 23f -20: - b 21f -21: sync - isync - b 22b - -23: - /* Perform a global invalidation */ - oris r3,r3,0x0020 - sync - mtspr SPRN_L2CR,r3 - sync - isync /* For errata */ - -BEGIN_FTR_SECTION - /* On the 7450, we wait for the L2I bit to clear...... - */ -10: mfspr r3,SPRN_L2CR - andis. r4,r3,0x0020 - bne 10b - b 11f -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) - - /* Wait for the invalidation to complete */ -3: mfspr r3,SPRN_L2CR - rlwinm. r4,r3,0,31,31 - bne 3b - -11: rlwinm r3,r3,0,11,9 /* Turn off the L2I bit */ - sync - mtspr SPRN_L2CR,r3 - sync - - /* See if we need to enable the cache */ - cmplwi r5,0 - beq 4f - - /* Enable the cache */ - oris r3,r3,0x8000 - mtspr SPRN_L2CR,r3 - sync - - /* Enable L2 HW prefetch on 744x/745x */ -BEGIN_FTR_SECTION - mfspr r3,SPRN_MSSCR0 - ori r3,r3,3 - sync - mtspr SPRN_MSSCR0,r3 - sync - isync -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) -4: - - /* Restore HID0[DPM] to whatever it was before */ - sync - mtspr 1008,r8 - sync - - /* Restore MSR (restores EE and DR bits to original state) */ - SYNC - mtmsr r7 - isync - - mtlr r9 - blr - -_GLOBAL(_get_L2CR) - /* Return the L2CR contents */ - li r3,0 -BEGIN_FTR_SECTION - mfspr r3,SPRN_L2CR -END_FTR_SECTION_IFSET(CPU_FTR_L2CR) - blr - - -/* - * Here is a similar routine for dealing with the L3 cache - * on the 745x family of chips - */ - -_GLOBAL(_set_L3CR) - /* Make sure this is a 745x chip */ -BEGIN_FTR_SECTION - li r3,-1 - blr -END_FTR_SECTION_IFCLR(CPU_FTR_L3CR) - - /* Turn off interrupts and data relocation. */ - mfmsr r7 /* Save MSR in r7 */ - rlwinm r4,r7,0,17,15 - rlwinm r4,r4,0,28,26 /* Turn off DR bit */ - sync - mtmsr r4 - isync - - /* Stop DST streams */ - DSSALL - sync - - /* Get the current enable bit of the L3CR into r4 */ - mfspr r4,SPRN_L3CR - - /* Tweak some bits */ - rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ - rlwinm r3,r3,0,22,20 /* Turn off the invalidate bit */ - rlwinm r3,r3,0,2,31 /* Turn off the enable & PE bits */ - rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ - /* Check to see if we need to flush */ - rlwinm. r4,r4,0,0,0 - beq 2f - - /* Flush the cache. - */ - - /* TODO: use HW flush assist */ - - lis r4,0x0008 - mtctr r4 - li r4,0 -1: - lwzx r0,r0,r4 - dcbf 0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - -2: - /* Set up the L3CR configuration bits (and switch L3 off) */ - sync - mtspr SPRN_L3CR,r3 - sync - - oris r3,r3,L3CR_L3RES@h /* Set reserved bit 5 */ - mtspr SPRN_L3CR,r3 - sync - oris r3,r3,L3CR_L3CLKEN@h /* Set clken */ - mtspr SPRN_L3CR,r3 - sync - - /* Wait for stabilize */ - li r0,256 - mtctr r0 -1: bdnz 1b - - /* Perform a global invalidation */ - ori r3,r3,0x0400 - sync - mtspr SPRN_L3CR,r3 - sync - isync - - /* We wait for the L3I bit to clear...... */ -10: mfspr r3,SPRN_L3CR - andi. r4,r3,0x0400 - bne 10b - - /* Clear CLKEN */ - rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ - mtspr SPRN_L3CR,r3 - sync - - /* Wait for stabilize */ - li r0,256 - mtctr r0 -1: bdnz 1b - - /* See if we need to enable the cache */ - cmplwi r5,0 - beq 4f - - /* Enable the cache */ - oris r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h - mtspr SPRN_L3CR,r3 - sync - - /* Wait for stabilize */ - li r0,256 - mtctr r0 -1: bdnz 1b - - /* Restore MSR (restores EE and DR bits to original state) */ -4: SYNC - mtmsr r7 - isync - blr - -_GLOBAL(_get_L3CR) - /* Return the L3CR contents */ - li r3,0 -BEGIN_FTR_SECTION - mfspr r3,SPRN_L3CR -END_FTR_SECTION_IFSET(CPU_FTR_L3CR) - blr - -/* --- End of PowerLogix code --- - */ - - -/* flush_disable_L1() - Flush and disable L1 cache - * - * clobbers r0, r3, ctr, cr0 - * Must be called with interrupts disabled and MMU enabled. - */ -_GLOBAL(__flush_disable_L1) - /* Stop pending alitvec streams and memory accesses */ -BEGIN_FTR_SECTION - DSSALL -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - sync - - /* Load counter to 0x4000 cache lines (512k) and - * load cache with datas - */ - li r3,0x4000 /* 512kB / 32B */ - mtctr r3 - lis r3,KERNELBASE@h -1: - lwz r0,0(r3) - addi r3,r3,0x0020 /* Go to start of next cache line */ - bdnz 1b - isync - sync - - /* Now flush those cache lines */ - li r3,0x4000 /* 512kB / 32B */ - mtctr r3 - lis r3,KERNELBASE@h -1: - dcbf 0,r3 - addi r3,r3,0x0020 /* Go to start of next cache line */ - bdnz 1b - sync - - /* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */ - mfspr r3,SPRN_HID0 - rlwinm r3,r3,0,18,15 - mtspr SPRN_HID0,r3 - sync - isync - blr - -/* inval_enable_L1 - Invalidate and enable L1 cache - * - * Assumes L1 is already disabled and MSR:EE is off - * - * clobbers r3 - */ -_GLOBAL(__inval_enable_L1) - /* Enable and then Flash inval the instruction & data cache */ - mfspr r3,SPRN_HID0 - ori r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI - sync - isync - mtspr SPRN_HID0,r3 - xori r3,r3, HID0_ICFI|HID0_DCI - mtspr SPRN_HID0,r3 - sync - - blr - - diff --git a/arch/ppc/kernel/module.c b/arch/ppc/kernel/module.c deleted file mode 100644 index 92f4e5f64f0..00000000000 --- a/arch/ppc/kernel/module.c +++ /dev/null @@ -1,320 +0,0 @@ -/* Kernel module help for PPC. - Copyright (C) 2001 Rusty Russell. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ -#include <linux/module.h> -#include <linux/moduleloader.h> -#include <linux/elf.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/cache.h> - -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt , ...) -#endif - -LIST_HEAD(module_bug_list); - -void *module_alloc(unsigned long size) -{ - if (size == 0) - return NULL; - return vmalloc(size); -} - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - -/* Count how many different relocations (different symbol, different - addend) */ -static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num) -{ - unsigned int i, j, ret = 0; - - /* Sure, this is order(n^2), but it's usually short, and not - time critical */ - for (i = 0; i < num; i++) { - for (j = 0; j < i; j++) { - /* If this addend appeared before, it's - already been counted */ - if (ELF32_R_SYM(rela[i].r_info) - == ELF32_R_SYM(rela[j].r_info) - && rela[i].r_addend == rela[j].r_addend) - break; - } - if (j == i) ret++; - } - return ret; -} - -/* Get the potential trampolines size required of the init and - non-init sections */ -static unsigned long get_plt_size(const Elf32_Ehdr *hdr, - const Elf32_Shdr *sechdrs, - const char *secstrings, - int is_init) -{ - unsigned long ret = 0; - unsigned i; - - /* Everything marked ALLOC (this includes the exported - symbols) */ - for (i = 1; i < hdr->e_shnum; i++) { - /* If it's called *.init*, and we're not init, we're - not interested */ - if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0) - != is_init) - continue; - - /* We don't want to look at debug sections. */ - if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != 0) - continue; - - if (sechdrs[i].sh_type == SHT_RELA) { - DEBUGP("Found relocations in section %u\n", i); - DEBUGP("Ptr: %p. Number: %u\n", - (void *)hdr + sechdrs[i].sh_offset, - sechdrs[i].sh_size / sizeof(Elf32_Rela)); - ret += count_relocs((void *)hdr - + sechdrs[i].sh_offset, - sechdrs[i].sh_size - / sizeof(Elf32_Rela)) - * sizeof(struct ppc_plt_entry); - } - } - - return ret; -} - -int module_frob_arch_sections(Elf32_Ehdr *hdr, - Elf32_Shdr *sechdrs, - char *secstrings, - struct module *me) -{ - unsigned int i; - - /* Find .plt and .init.plt sections */ - for (i = 0; i < hdr->e_shnum; i++) { - if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0) - me->arch.init_plt_section = i; - else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0) - me->arch.core_plt_section = i; - } - if (!me->arch.core_plt_section || !me->arch.init_plt_section) { - printk("Module doesn't contain .plt or .init.plt sections.\n"); - return -ENOEXEC; - } - - /* Override their sizes */ - sechdrs[me->arch.core_plt_section].sh_size - = get_plt_size(hdr, sechdrs, secstrings, 0); - sechdrs[me->arch.init_plt_section].sh_size - = get_plt_size(hdr, sechdrs, secstrings, 1); - return 0; -} - -int apply_relocate(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *module) -{ - printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n", - module->name); - return -ENOEXEC; -} - -static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val) -{ - if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16) - && entry->jump[1] == 0x396b0000 + (val & 0xffff)) - return 1; - return 0; -} - -/* Set up a trampoline in the PLT to bounce us to the distant function */ -static uint32_t do_plt_call(void *location, - Elf32_Addr val, - Elf32_Shdr *sechdrs, - struct module *mod) -{ - struct ppc_plt_entry *entry; - - DEBUGP("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location); - /* Init, or core PLT? */ - if (location >= mod->module_core - && location < mod->module_core + mod->core_size) - entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr; - else - entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr; - - /* Find this entry, or if that fails, the next avail. entry */ - while (entry->jump[0]) { - if (entry_matches(entry, val)) return (uint32_t)entry; - entry++; - } - - /* Stolen from Paul Mackerras as well... */ - entry->jump[0] = 0x3d600000+((val+0x8000)>>16); /* lis r11,sym@ha */ - entry->jump[1] = 0x396b0000 + (val&0xffff); /* addi r11,r11,sym@l*/ - entry->jump[2] = 0x7d6903a6; /* mtctr r11 */ - entry->jump[3] = 0x4e800420; /* bctr */ - - DEBUGP("Initialized plt for 0x%x at %p\n", val, entry); - return (uint32_t)entry; -} - -int apply_relocate_add(Elf32_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *module) -{ - unsigned int i; - Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; - Elf32_Sym *sym; - uint32_t *location; - uint32_t value; - - DEBUGP("Applying ADD relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rela[i].r_offset; - /* This is the symbol it is referring to. Note that all - undefined symbols have been resolved. */ - sym = (Elf32_Sym *)sechdrs[symindex].sh_addr - + ELF32_R_SYM(rela[i].r_info); - /* `Everything is relative'. */ - value = sym->st_value + rela[i].r_addend; - - switch (ELF32_R_TYPE(rela[i].r_info)) { - case R_PPC_ADDR32: - /* Simply set it */ - *(uint32_t *)location = value; - break; - - case R_PPC_ADDR16_LO: - /* Low half of the symbol */ - *(uint16_t *)location = value; - break; - - case R_PPC_ADDR16_HA: - /* Sign-adjusted lower 16 bits: PPC ELF ABI says: - (((x >> 16) + ((x & 0x8000) ? 1 : 0))) & 0xFFFF. - This is the same, only sane. - */ - *(uint16_t *)location = (value + 0x8000) >> 16; - break; - - case R_PPC_REL24: - if ((int)(value - (uint32_t)location) < -0x02000000 - || (int)(value - (uint32_t)location) >= 0x02000000) - value = do_plt_call(location, value, - sechdrs, module); - - /* Only replace bits 2 through 26 */ - DEBUGP("REL24 value = %08X. location = %08X\n", - value, (uint32_t)location); - DEBUGP("Location before: %08X.\n", - *(uint32_t *)location); - *(uint32_t *)location - = (*(uint32_t *)location & ~0x03fffffc) - | ((value - (uint32_t)location) - & 0x03fffffc); - DEBUGP("Location after: %08X.\n", - *(uint32_t *)location); - DEBUGP("ie. jump to %08X+%08X = %08X\n", - *(uint32_t *)location & 0x03fffffc, - (uint32_t)location, - (*(uint32_t *)location & 0x03fffffc) - + (uint32_t)location); - break; - - case R_PPC_REL32: - /* 32-bit relative jump. */ - *(uint32_t *)location = value - (uint32_t)location; - break; - - default: - printk("%s: unknown ADD relocation: %u\n", - module->name, - ELF32_R_TYPE(rela[i].r_info)); - return -ENOEXEC; - } - } - return 0; -} - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *me) -{ - char *secstrings; - unsigned int i; - - me->arch.bug_table = NULL; - me->arch.num_bugs = 0; - - /* Find the __bug_table section, if present */ - secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - for (i = 1; i < hdr->e_shnum; i++) { - if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table")) - continue; - me->arch.bug_table = (void *) sechdrs[i].sh_addr; - me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); - break; - } - - /* - * Strictly speaking this should have a spinlock to protect against - * traversals, but since we only traverse on BUG()s, a spinlock - * could potentially lead to deadlock and thus be counter-productive. - */ - list_add(&me->arch.bug_list, &module_bug_list); - - return 0; -} - -void module_arch_cleanup(struct module *mod) -{ - list_del(&mod->arch.bug_list); -} - -struct bug_entry *module_find_bug(unsigned long bugaddr) -{ - struct mod_arch_specific *mod; - unsigned int i; - struct bug_entry *bug; - - list_for_each_entry(mod, &module_bug_list, bug_list) { - bug = mod->bug_table; - for (i = 0; i < mod->num_bugs; ++i, ++bug) - if (bugaddr == bug->bug_addr) - return bug; - } - return NULL; -} diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 04d04c5bfdd..809673a36f7 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -46,9 +46,6 @@ static void pcibios_fixup_resources(struct pci_dev* dev); static void fixup_broken_pcnet32(struct pci_dev* dev); static int reparent_resources(struct resource *parent, struct resource *res); static void fixup_cpc710_pci64(struct pci_dev* dev); -#ifdef CONFIG_PPC_OF -static u8* pci_to_OF_bus_map; -#endif /* By default, we don't re-assign bus numbers. */ @@ -625,406 +622,13 @@ pcibios_alloc_controller(void) return hose; } -#ifdef CONFIG_PPC_OF -/* - * Functions below are used on OpenFirmware machines. - */ -static void -make_one_node_map(struct device_node* node, u8 pci_bus) -{ - int *bus_range; - int len; - - if (pci_bus >= pci_bus_count) - return; - bus_range = (int *) get_property(node, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, " - "assuming it starts at 0\n", node->full_name); - pci_to_OF_bus_map[pci_bus] = 0; - } else - pci_to_OF_bus_map[pci_bus] = bus_range[0]; - - for (node=node->child; node != 0;node = node->sibling) { - struct pci_dev* dev; - unsigned int *class_code, *reg; - - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) - continue; - reg = (unsigned int *)get_property(node, "reg", NULL); - if (!reg) - continue; - dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff)); - if (!dev || !dev->subordinate) - continue; - make_one_node_map(node, dev->subordinate->number); - } -} - -void -pcibios_make_OF_bus_map(void) -{ - int i; - struct pci_controller* hose; - u8* of_prop_map; - - pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL); - if (!pci_to_OF_bus_map) { - printk(KERN_ERR "Can't allocate OF bus map !\n"); - return; - } - - /* We fill the bus map with invalid values, that helps - * debugging. - */ - for (i=0; i<pci_bus_count; i++) - pci_to_OF_bus_map[i] = 0xff; - - /* For each hose, we begin searching bridges */ - for(hose=hose_head; hose; hose=hose->next) { - struct device_node* node; - node = (struct device_node *)hose->arch_data; - if (!node) - continue; - make_one_node_map(node, hose->first_busno); - } - of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL); - if (of_prop_map) - memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count); -#ifdef DEBUG - printk("PCI->OF bus map:\n"); - for (i=0; i<pci_bus_count; i++) { - if (pci_to_OF_bus_map[i] == 0xff) - continue; - printk("%d -> %d\n", i, pci_to_OF_bus_map[i]); - } -#endif -} - -typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data); - -static struct device_node* -scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data) -{ - struct device_node* sub_node; - - for (; node != 0;node = node->sibling) { - unsigned int *class_code; - - if (filter(node, data)) - return node; - - /* For PCI<->PCI bridges or CardBus bridges, we go down - * Note: some OFs create a parent node "multifunc-device" as - * a fake root for all functions of a multi-function device, - * we go down them as well. - */ - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) && - strcmp(node->name, "multifunc-device")) - continue; - sub_node = scan_OF_pci_childs(node->child, filter, data); - if (sub_node) - return sub_node; - } - return NULL; -} - -static int -scan_OF_pci_childs_iterator(struct device_node* node, void* data) -{ - unsigned int *reg; - u8* fdata = (u8*)data; - - reg = (unsigned int *) get_property(node, "reg", NULL); - if (reg && ((reg[0] >> 8) & 0xff) == fdata[1] - && ((reg[0] >> 16) & 0xff) == fdata[0]) - return 1; - return 0; -} - -static struct device_node* -scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn) -{ - u8 filter_data[2] = {bus, dev_fn}; - - return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data); -} - -/* - * Scans the OF tree for a device node matching a PCI device - */ -struct device_node * -pci_busdev_to_OF_node(struct pci_bus *bus, int devfn) -{ - struct pci_controller *hose; - struct device_node *node; - int busnr; - - if (!have_of) - return NULL; - - /* Lookup the hose */ - busnr = bus->number; - hose = pci_bus_to_hose(busnr); - if (!hose) - return NULL; - - /* Check it has an OF node associated */ - node = (struct device_node *) hose->arch_data; - if (!node) - return NULL; - - /* Fixup bus number according to what OF think it is. */ - if (pci_to_OF_bus_map) - busnr = pci_to_OF_bus_map[busnr]; - if (busnr == 0xff) - return NULL; - - /* Now, lookup childs of the hose */ - return scan_OF_childs_for_device(node->child, busnr, devfn); -} -EXPORT_SYMBOL(pci_busdev_to_OF_node); - -struct device_node* -pci_device_to_OF_node(struct pci_dev *dev) -{ - return pci_busdev_to_OF_node(dev->bus, dev->devfn); -} -EXPORT_SYMBOL(pci_device_to_OF_node); - -/* This routine is meant to be used early during boot, when the - * PCI bus numbers have not yet been assigned, and you need to - * issue PCI config cycles to an OF device. - * It could also be used to "fix" RTAS config cycles if you want - * to set pci_assign_all_buses to 1 and still use RTAS for PCI - * config cycles. - */ -struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) -{ - if (!have_of) - return NULL; - while(node) { - struct pci_controller* hose; - for (hose=hose_head;hose;hose=hose->next) - if (hose->arch_data == node) - return hose; - node=node->parent; - } - return NULL; -} - -static int -find_OF_pci_device_filter(struct device_node* node, void* data) -{ - return ((void *)node == data); -} - -/* - * Returns the PCI device matching a given OF node - */ -int -pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn) -{ - unsigned int *reg; - struct pci_controller* hose; - struct pci_dev* dev = NULL; - - if (!have_of) - return -ENODEV; - /* Make sure it's really a PCI device */ - hose = pci_find_hose_for_OF_device(node); - if (!hose || !hose->arch_data) - return -ENODEV; - if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child, - find_OF_pci_device_filter, (void *)node)) - return -ENODEV; - reg = (unsigned int *) get_property(node, "reg", NULL); - if (!reg) - return -ENODEV; - *bus = (reg[0] >> 16) & 0xff; - *devfn = ((reg[0] >> 8) & 0xff); - - /* Ok, here we need some tweak. If we have already renumbered - * all busses, we can't rely on the OF bus number any more. - * the pci_to_OF_bus_map is not enough as several PCI busses - * may match the same OF bus number. - */ - if (!pci_to_OF_bus_map) - return 0; - - for_each_pci_dev(dev) - if (pci_to_OF_bus_map[dev->bus->number] == *bus && - dev->devfn == *devfn) { - *bus = dev->bus->number; - pci_dev_put(dev); - return 0; - } - - return -ENODEV; -} -EXPORT_SYMBOL(pci_device_from_OF_node); - -void __init -pci_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, int primary) -{ - static unsigned int static_lc_ranges[256] __initdata; - unsigned int *dt_ranges, *lc_ranges, *ranges, *prev; - unsigned int size; - int rlen = 0, orig_rlen; - int memno = 0; - struct resource *res; - int np, na = prom_n_addr_cells(dev); - np = na + 5; - - /* First we try to merge ranges to fix a problem with some pmacs - * that can have more than 3 ranges, fortunately using contiguous - * addresses -- BenH - */ - dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen); - if (!dt_ranges) - return; - /* Sanity check, though hopefully that never happens */ - if (rlen > sizeof(static_lc_ranges)) { - printk(KERN_WARNING "OF ranges property too large !\n"); - rlen = sizeof(static_lc_ranges); - } - lc_ranges = static_lc_ranges; - memcpy(lc_ranges, dt_ranges, rlen); - orig_rlen = rlen; - - /* Let's work on a copy of the "ranges" property instead of damaging - * the device-tree image in memory - */ - ranges = lc_ranges; - prev = NULL; - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - if (prev) { - if (prev[0] == ranges[0] && prev[1] == ranges[1] && - (prev[2] + prev[na+4]) == ranges[2] && - (prev[na+2] + prev[na+4]) == ranges[na+2]) { - prev[na+4] += ranges[na+4]; - ranges[0] = 0; - ranges += np; - continue; - } - } - prev = ranges; - ranges += np; - } - - /* - * The ranges property is laid out as an array of elements, - * each of which comprises: - * cells 0 - 2: a PCI address - * cells 3 or 3+4: a CPU physical address - * (size depending on dev->n_addr_cells) - * cells 4+5 or 5+6: the size of the range - */ - ranges = lc_ranges; - rlen = orig_rlen; - while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { - res = NULL; - size = ranges[na+4]; - switch ((ranges[0] >> 24) & 0x3) { - case 1: /* I/O space */ - if (ranges[2] != 0) - break; - hose->io_base_phys = ranges[na+2]; - /* limit I/O space to 16MB */ - if (size > 0x01000000) - size = 0x01000000; - hose->io_base_virt = ioremap(ranges[na+2], size); - if (primary) - isa_io_base = (unsigned long) hose->io_base_virt; - res = &hose->io_resource; - res->flags = IORESOURCE_IO; - res->start = ranges[2]; - DBG("PCI: IO 0x%lx -> 0x%lx\n", - res->start, res->start + size - 1); - break; - case 2: /* memory space */ - memno = 0; - if (ranges[1] == 0 && ranges[2] == 0 - && ranges[na+4] <= (16 << 20)) { - /* 1st 16MB, i.e. ISA memory area */ - if (primary) - isa_mem_base = ranges[na+2]; - memno = 1; - } - while (memno < 3 && hose->mem_resources[memno].flags) - ++memno; - if (memno == 0) - hose->pci_mem_offset = ranges[na+2] - ranges[2]; - if (memno < 3) { - res = &hose->mem_resources[memno]; - res->flags = IORESOURCE_MEM; - if(ranges[0] & 0x40000000) - res->flags |= IORESOURCE_PREFETCH; - res->start = ranges[na+2]; - DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno, - res->start, res->start + size - 1); - } - break; - } - if (res != NULL) { - res->name = dev->full_name; - res->end = res->start + size - 1; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; - } - ranges += np; - } -} - -/* We create the "pci-OF-bus-map" property now so it appears in the - * /proc device tree - */ -void __init -pci_create_OF_bus_map(void) -{ - struct property* of_prop; - - of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256); - if (of_prop && find_path_device("/")) { - memset(of_prop, -1, sizeof(struct property) + 256); - of_prop->name = "pci-OF-bus-map"; - of_prop->length = 256; - of_prop->value = (unsigned char *)&of_prop[1]; - prom_add_property(find_path_device("/"), of_prop); - } -} - -static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev; - struct device_node *np; - - pdev = to_pci_dev (dev); - np = pci_device_to_OF_node(pdev); - if (np == NULL || np->full_name == NULL) - return 0; - return sprintf(buf, "%s", np->full_name); -} -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); - -#else /* CONFIG_PPC_OF */ void pcibios_make_OF_bus_map(void) { } -#endif /* CONFIG_PPC_OF */ /* Add sysfs properties */ void pcibios_add_platform_entries(struct pci_dev *pdev) { -#ifdef CONFIG_PPC_OF - device_create_file(&pdev->dev, &dev_attr_devspec); -#endif /* CONFIG_PPC_OF */ } diff --git a/arch/ppc/kernel/perfmon_fsl_booke.c b/arch/ppc/kernel/perfmon_fsl_booke.c deleted file mode 100644 index 32455dfcc36..00000000000 --- a/arch/ppc/kernel/perfmon_fsl_booke.c +++ /dev/null @@ -1,222 +0,0 @@ -/* kernel/perfmon_fsl_booke.c - * Freescale Book-E Performance Monitor code - * - * Author: Andy Fleming - * Copyright (c) 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/interrupt.h> -#include <linux/config.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/prctl.h> - -#include <asm/pgtable.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/reg.h> -#include <asm/xmon.h> -#include <asm/pmc.h> - -static inline u32 get_pmlca(int ctr); -static inline void set_pmlca(int ctr, u32 pmlca); - -static inline u32 get_pmlca(int ctr) -{ - u32 pmlca; - - switch (ctr) { - case 0: - pmlca = mfpmr(PMRN_PMLCA0); - break; - case 1: - pmlca = mfpmr(PMRN_PMLCA1); - break; - case 2: - pmlca = mfpmr(PMRN_PMLCA2); - break; - case 3: - pmlca = mfpmr(PMRN_PMLCA3); - break; - default: - panic("Bad ctr number\n"); - } - - return pmlca; -} - -static inline void set_pmlca(int ctr, u32 pmlca) -{ - switch (ctr) { - case 0: - mtpmr(PMRN_PMLCA0, pmlca); - break; - case 1: - mtpmr(PMRN_PMLCA1, pmlca); - break; - case 2: - mtpmr(PMRN_PMLCA2, pmlca); - break; - case 3: - mtpmr(PMRN_PMLCA3, pmlca); - break; - default: - panic("Bad ctr number\n"); - } -} - -void init_pmc_stop(int ctr) -{ - u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU | - PMLCA_FCM1 | PMLCA_FCM0); - u32 pmlcb = 0; - - switch (ctr) { - case 0: - mtpmr(PMRN_PMLCA0, pmlca); - mtpmr(PMRN_PMLCB0, pmlcb); - break; - case 1: - mtpmr(PMRN_PMLCA1, pmlca); - mtpmr(PMRN_PMLCB1, pmlcb); - break; - case 2: - mtpmr(PMRN_PMLCA2, pmlca); - mtpmr(PMRN_PMLCB2, pmlcb); - break; - case 3: - mtpmr(PMRN_PMLCA3, pmlca); - mtpmr(PMRN_PMLCB3, pmlcb); - break; - default: - panic("Bad ctr number!\n"); - } -} - -void set_pmc_event(int ctr, int event) -{ - u32 pmlca; - - pmlca = get_pmlca(ctr); - - pmlca = (pmlca & ~PMLCA_EVENT_MASK) | - ((event << PMLCA_EVENT_SHIFT) & - PMLCA_EVENT_MASK); - - set_pmlca(ctr, pmlca); -} - -void set_pmc_user_kernel(int ctr, int user, int kernel) -{ - u32 pmlca; - - pmlca = get_pmlca(ctr); - - if(user) - pmlca &= ~PMLCA_FCU; - else - pmlca |= PMLCA_FCU; - - if(kernel) - pmlca &= ~PMLCA_FCS; - else - pmlca |= PMLCA_FCS; - - set_pmlca(ctr, pmlca); -} - -void set_pmc_marked(int ctr, int mark0, int mark1) -{ - u32 pmlca = get_pmlca(ctr); - - if(mark0) - pmlca &= ~PMLCA_FCM0; - else - pmlca |= PMLCA_FCM0; - - if(mark1) - pmlca &= ~PMLCA_FCM1; - else - pmlca |= PMLCA_FCM1; - - set_pmlca(ctr, pmlca); -} - -void pmc_start_ctr(int ctr, int enable) -{ - u32 pmlca = get_pmlca(ctr); - - pmlca &= ~PMLCA_FC; - - if (enable) - pmlca |= PMLCA_CE; - else - pmlca &= ~PMLCA_CE; - - set_pmlca(ctr, pmlca); -} - -void pmc_start_ctrs(int enable) -{ - u32 pmgc0 = mfpmr(PMRN_PMGC0); - - pmgc0 &= ~PMGC0_FAC; - pmgc0 |= PMGC0_FCECE; - - if (enable) - pmgc0 |= PMGC0_PMIE; - else - pmgc0 &= ~PMGC0_PMIE; - - mtpmr(PMRN_PMGC0, pmgc0); -} - -void pmc_stop_ctrs(void) -{ - u32 pmgc0 = mfpmr(PMRN_PMGC0); - - pmgc0 |= PMGC0_FAC; - - pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE); - - mtpmr(PMRN_PMGC0, pmgc0); -} - -void dump_pmcs(void) -{ - printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0)); - printk("pmc\t\tpmlca\t\tpmlcb\n"); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0), - mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0)); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1), - mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1)); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2), - mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2)); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3), - mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3)); -} - -EXPORT_SYMBOL(init_pmc_stop); -EXPORT_SYMBOL(set_pmc_event); -EXPORT_SYMBOL(set_pmc_user_kernel); -EXPORT_SYMBOL(set_pmc_marked); -EXPORT_SYMBOL(pmc_start_ctr); -EXPORT_SYMBOL(pmc_start_ctrs); -EXPORT_SYMBOL(pmc_stop_ctrs); -EXPORT_SYMBOL(dump_pmcs); diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c index 2f5c7650274..75c64504374 100644 --- a/arch/ppc/kernel/ppc_htab.c +++ b/arch/ppc/kernel/ppc_htab.c @@ -52,7 +52,7 @@ static int ppc_htab_open(struct inode *inode, struct file *file) return single_open(file, ppc_htab_show, NULL); } -struct file_operations ppc_htab_operations = { +const struct file_operations ppc_htab_operations = { .open = ppc_htab_open, .read = seq_read, .llseek = seq_lseek, @@ -104,7 +104,7 @@ static char *pmc2_lookup(unsigned long mmcr0) static int ppc_htab_show(struct seq_file *m, void *v) { unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0; -#if defined(CONFIG_PPC_STD_MMU) && !defined(CONFIG_PPC64BRIDGE) +#if defined(CONFIG_PPC_STD_MMU) unsigned int kptes = 0, uptes = 0; PTE *ptr; #endif /* CONFIG_PPC_STD_MMU */ @@ -133,7 +133,6 @@ static int ppc_htab_show(struct seq_file *m, void *v) return 0; } -#ifndef CONFIG_PPC64BRIDGE for (ptr = Hash; ptr < Hash_end; ptr++) { unsigned int mctx, vsid; @@ -147,7 +146,6 @@ static int ppc_htab_show(struct seq_file *m, void *v) else uptes++; } -#endif seq_printf(m, "PTE Hash Table Information\n" @@ -155,20 +153,16 @@ static int ppc_htab_show(struct seq_file *m, void *v) "Buckets\t\t: %lu\n" "Address\t\t: %08lx\n" "Entries\t\t: %lu\n" -#ifndef CONFIG_PPC64BRIDGE "User ptes\t: %u\n" "Kernel ptes\t: %u\n" "Percent full\t: %lu%%\n" -#endif , (unsigned long)(Hash_size>>10), (Hash_size/(sizeof(PTE)*8)), (unsigned long)Hash, Hash_size/sizeof(PTE) -#ifndef CONFIG_PPC64BRIDGE , uptes, kptes, ((kptes+uptes)*100) / (Hash_size/sizeof(PTE)) -#endif ); seq_printf(m, diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 82adb460134..865ba74991a 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -18,7 +18,6 @@ #include <linux/bitops.h> #include <asm/page.h> -#include <asm/semaphore.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -30,7 +29,6 @@ #include <linux/adb.h> #include <linux/cuda.h> #include <linux/pmu.h> -#include <asm/prom.h> #include <asm/system.h> #include <asm/pci-bridge.h> #include <asm/irq.h> @@ -208,27 +206,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_PPC_OF -EXPORT_SYMBOL(find_devices); -EXPORT_SYMBOL(find_type_devices); -EXPORT_SYMBOL(find_compatible_devices); -EXPORT_SYMBOL(find_path_device); -EXPORT_SYMBOL(device_is_compatible); -EXPORT_SYMBOL(machine_is_compatible); -EXPORT_SYMBOL(find_all_nodes); -EXPORT_SYMBOL(get_property); -EXPORT_SYMBOL(request_OF_resource); -EXPORT_SYMBOL(release_OF_resource); -EXPORT_SYMBOL(of_find_node_by_name); -EXPORT_SYMBOL(of_find_node_by_type); -EXPORT_SYMBOL(of_find_compatible_node); -EXPORT_SYMBOL(of_find_node_by_path); -EXPORT_SYMBOL(of_find_all_nodes); -EXPORT_SYMBOL(of_get_parent); -EXPORT_SYMBOL(of_get_next_child); -EXPORT_SYMBOL(of_node_get); -EXPORT_SYMBOL(of_node_put); -#endif /* CONFIG_PPC_OF */ #if defined(CONFIG_BOOTX_TEXT) EXPORT_SYMBOL(btext_update_display); #endif @@ -262,9 +239,6 @@ EXPORT_SYMBOL(console_drivers); EXPORT_SYMBOL(xmon); EXPORT_SYMBOL(xmon_printf); #endif -EXPORT_SYMBOL(__up); -EXPORT_SYMBOL(__down); -EXPORT_SYMBOL(__down_interruptible); #if defined(CONFIG_KGDB) || defined(CONFIG_XMON) extern void (*debugger)(struct pt_regs *regs); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index c08ab432e95..1f79e84ab46 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -1,5 +1,5 @@ /* - * Common prep/chrp boot and setup code. + * Common prep boot and setup code. */ #include <linux/config.h> @@ -72,17 +72,12 @@ unsigned long ISA_DMA_THRESHOLD; unsigned int DMA_MODE_READ; unsigned int DMA_MODE_WRITE; -#ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; -EXPORT_SYMBOL(_machine); - +#ifdef CONFIG_PPC_PREP extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void chrp_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); dev_t boot_dev; -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_PPC_PREP */ int have_of; EXPORT_SYMBOL(have_of); @@ -168,9 +163,8 @@ int show_cpuinfo(struct seq_file *m, void *v) /* Show summary information */ #ifdef CONFIG_SMP unsigned long bogosum = 0; - for (i = 0; i < NR_CPUS; ++i) - if (cpu_online(i)) - bogosum += cpu_data[i].loops_per_jiffy; + for_each_online_cpu(i) + bogosum += cpu_data[i].loops_per_jiffy; seq_printf(m, "total bogomips\t: %lu.%02lu\n", bogosum/(500000/HZ), bogosum/(5000/HZ) % 100); #endif /* CONFIG_SMP */ @@ -320,72 +314,12 @@ early_init(int r3, int r4, int r5) identify_cpu(offset, 0); do_cpu_ftr_fixups(offset); -#if defined(CONFIG_PPC_OF) - reloc_got2(offset); - - /* - * don't do anything on prep - * for now, don't use bootinfo because it breaks yaboot 0.5 - * and assume that if we didn't find a magic number, we have OF - */ - if (*(unsigned long *)(0) != 0xdeadc0de) - phys = prom_init(r3, r4, (prom_entry)r5); - - reloc_got2(-offset); -#endif - return phys; } -#ifdef CONFIG_PPC_OF -/* - * Assume here that all clock rates are the same in a - * smp system. -- Cort - */ -int -of_show_percpuinfo(struct seq_file *m, int i) -{ - struct device_node *cpu_node; - u32 *fp; - int s; - - cpu_node = find_type_devices("cpu"); - if (!cpu_node) - return 0; - for (s = 0; s < i && cpu_node->next; s++) - cpu_node = cpu_node->next; - fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL); - if (fp) - seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000); - return 0; -} - -void __init -intuit_machine_type(void) -{ - char *model; - struct device_node *root; - - /* ask the OF info if we're a chrp or pmac */ - root = find_path_device("/"); - if (root != 0) { - /* assume pmac unless proven to be chrp -- Cort */ - _machine = _MACH_Pmac; - model = get_property(root, "device_type", NULL); - if (model && !strncmp("chrp", model, 4)) - _machine = _MACH_chrp; - else { - model = get_property(root, "model", NULL); - if (model && !strncmp(model, "IBM", 3)) - _machine = _MACH_chrp; - } - } -} -#endif - -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP /* - * The PPC_MULTIPLATFORM version of platform_init... + * The PPC_PREP version of platform_init... */ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, @@ -400,161 +334,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, parse_bootinfo(find_bootinfo()); - /* if we didn't get any bootinfo telling us what we are... */ - if (_machine == 0) { - /* prep boot loader tells us if we're prep or not */ - if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) ) - _machine = _MACH_prep; - } - -#ifdef CONFIG_PPC_PREP - /* not much more to do here, if prep */ - if (_machine == _MACH_prep) { - prep_init(r3, r4, r5, r6, r7); - return; - } -#endif - -#ifdef CONFIG_PPC_OF - have_of = 1; - - /* prom_init has already been called from __start */ - if (boot_infos) - relocate_nodes(); - - /* If we aren't PReP, we can find out if we're Pmac - * or CHRP with this. */ - if (_machine == 0) - intuit_machine_type(); - - /* finish_device_tree may need _machine defined. */ - finish_device_tree(); - - /* - * If we were booted via quik, r3 points to the physical - * address of the command-line parameters. - * If we were booted from an xcoff image (i.e. netbooted or - * booted from floppy), we get the command line from the - * bootargs property of the /chosen node. - * If an initial ramdisk is present, r3 and r4 - * are used for initrd_start and initrd_size, - * otherwise they contain 0xdeadbeef. - */ - if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) { - strlcpy(cmd_line, (char *)r3 + KERNELBASE, - sizeof(cmd_line)); - } else if (boot_infos != 0) { - /* booted by BootX - check for ramdisk */ - if (boot_infos->kernelParamsOffset != 0) - strlcpy(cmd_line, (char *) boot_infos - + boot_infos->kernelParamsOffset, - sizeof(cmd_line)); -#ifdef CONFIG_BLK_DEV_INITRD - if (boot_infos->ramDisk) { - initrd_start = (unsigned long) boot_infos - + boot_infos->ramDisk; - initrd_end = initrd_start + boot_infos->ramDiskSize; - initrd_below_start_ok = 1; - } -#endif - } else { - struct device_node *chosen; - char *p; - -#ifdef CONFIG_BLK_DEV_INITRD - if (r3 && r4 && r4 != 0xdeadbeef) { - if (r3 < KERNELBASE) - r3 += KERNELBASE; - initrd_start = r3; - initrd_end = r3 + r4; - ROOT_DEV = Root_RAM0; - initrd_below_start_ok = 1; - } -#endif - chosen = find_devices("chosen"); - if (chosen != NULL) { - p = get_property(chosen, "bootargs", NULL); - if (p && *p) { - strlcpy(cmd_line, p, sizeof(cmd_line)); - } - } - } -#ifdef CONFIG_ADB - if (strstr(cmd_line, "adb_sync")) { - extern int __adb_probe_sync; - __adb_probe_sync = 1; - } -#endif /* CONFIG_ADB */ - - switch (_machine) { -#ifdef CONFIG_PPC_CHRP - case _MACH_chrp: - chrp_init(r3, r4, r5, r6, r7); - break; -#endif - } -#endif /* CONFIG_PPC_OF */ + prep_init(r3, r4, r5, r6, r7); } -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -#ifdef CONFIG_PPC_OF -#ifdef CONFIG_SERIAL_CORE_CONSOLE -extern char *of_stdout_device; - -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout; - char *name; - int offset = 0; - - if (of_stdout_device == NULL) - return -ENODEV; - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) - return -EBUSY; - - prom_stdout = find_path_device(of_stdout_device); - if (!prom_stdout) - return -ENODEV; - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) - return -ENODEV; - - if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - return -ENODEV; - } - } - } else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; - else - return -ENODEV; - return add_preferred_console("ttyS", offset, NULL); -} -console_initcall(set_preferred_console); -#endif /* CONFIG_SERIAL_CORE_CONSOLE */ -#endif /* CONFIG_PPC_OF */ +#endif /* CONFIG_PPC_PREP */ struct bi_record *find_bootinfo(void) { @@ -590,23 +372,6 @@ void parse_bootinfo(struct bi_record *rec) initrd_end = data[0] + data[1] + KERNELBASE; break; #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_MULTIPLATFORM - case BI_MACHTYPE: - /* Machine types changed with the merge. Since the - * bootinfo are now deprecated, we can just hard code - * the appropriate conversion here for when we are - * called with yaboot which passes us a machine type - * this way. - */ - switch(data[0]) { - case 1: _machine = _MACH_prep; break; - case 2: _machine = _MACH_Pmac; break; - case 4: _machine = _MACH_chrp; break; - default: - _machine = data[0]; - } - break; -#endif case BI_MEMSIZE: boot_mem_size = data[0]; break; @@ -632,9 +397,6 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5, #ifdef CONFIG_6xx ppc_md.power_save = ppc6xx_idle; #endif -#ifdef CONFIG_POWER4 - ppc_md.power_save = power4_idle; -#endif platform_init(r3, r4, r5, r6, r7); @@ -712,9 +474,8 @@ int __init ppc_init(void) if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff); /* register CPU devices */ - for (i = 0; i < NR_CPUS; i++) - if (cpu_possible(i)) - register_cpu(&cpu_devices[i], i, NULL); + for_each_possible_cpu(i) + register_cpu(&cpu_devices[i], i, NULL); /* call platform init */ if (ppc_md.init != NULL) { @@ -801,7 +562,4 @@ void __init setup_arch(char **cmdline_p) if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); paging_init(); - - /* this is for modules since _machine can be a define -- Cort */ - ppc_md.ppc_machine = _machine; } diff --git a/arch/ppc/kernel/smp-tbsync.c b/arch/ppc/kernel/smp-tbsync.c index 2c9cd95bcea..6a5694fcc71 100644 --- a/arch/ppc/kernel/smp-tbsync.c +++ b/arch/ppc/kernel/smp-tbsync.c @@ -126,8 +126,7 @@ smp_generic_give_timebase( void ) printk("Synchronizing timebase\n"); /* if this fails then this kernel won't work anyway... */ - tbsync = kmalloc( sizeof(*tbsync), GFP_KERNEL ); - memset( tbsync, 0, sizeof(*tbsync) ); + tbsync = kzalloc( sizeof(*tbsync), GFP_KERNEL ); mb(); running = 1; diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c index e55cdda6149..f77795a64da 100644 --- a/arch/ppc/kernel/smp.c +++ b/arch/ppc/kernel/smp.c @@ -311,7 +311,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* Backup CPU 0 state */ __save_cpu_setup(); - for_each_cpu(cpu) { + for_each_possible_cpu(cpu) { if (cpu == smp_processor_id()) continue; /* create a process for the processor */ diff --git a/arch/ppc/kernel/swsusp.S b/arch/ppc/kernel/swsusp.S deleted file mode 100644 index 69773cc1a85..00000000000 --- a/arch/ppc/kernel/swsusp.S +++ /dev/null @@ -1,349 +0,0 @@ -#include <linux/config.h> -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> - - -/* - * Structure for storing CPU registers on the save area. - */ -#define SL_SP 0 -#define SL_PC 4 -#define SL_MSR 8 -#define SL_SDR1 0xc -#define SL_SPRG0 0x10 /* 4 sprg's */ -#define SL_DBAT0 0x20 -#define SL_IBAT0 0x28 -#define SL_DBAT1 0x30 -#define SL_IBAT1 0x38 -#define SL_DBAT2 0x40 -#define SL_IBAT2 0x48 -#define SL_DBAT3 0x50 -#define SL_IBAT3 0x58 -#define SL_TB 0x60 -#define SL_R2 0x68 -#define SL_CR 0x6c -#define SL_LR 0x70 -#define SL_R12 0x74 /* r12 to r31 */ -#define SL_SIZE (SL_R12 + 80) - - .section .data - .align 5 - -_GLOBAL(swsusp_save_area) - .space SL_SIZE - - - .section .text - .align 5 - -_GLOBAL(swsusp_arch_suspend) - - lis r11,swsusp_save_area@h - ori r11,r11,swsusp_save_area@l - - mflr r0 - stw r0,SL_LR(r11) - mfcr r0 - stw r0,SL_CR(r11) - stw r1,SL_SP(r11) - stw r2,SL_R2(r11) - stmw r12,SL_R12(r11) - - /* Save MSR & SDR1 */ - mfmsr r4 - stw r4,SL_MSR(r11) - mfsdr1 r4 - stw r4,SL_SDR1(r11) - - /* Get a stable timebase and save it */ -1: mftbu r4 - stw r4,SL_TB(r11) - mftb r5 - stw r5,SL_TB+4(r11) - mftbu r3 - cmpw r3,r4 - bne 1b - - /* Save SPRGs */ - mfsprg r4,0 - stw r4,SL_SPRG0(r11) - mfsprg r4,1 - stw r4,SL_SPRG0+4(r11) - mfsprg r4,2 - stw r4,SL_SPRG0+8(r11) - mfsprg r4,3 - stw r4,SL_SPRG0+12(r11) - - /* Save BATs */ - mfdbatu r4,0 - stw r4,SL_DBAT0(r11) - mfdbatl r4,0 - stw r4,SL_DBAT0+4(r11) - mfdbatu r4,1 - stw r4,SL_DBAT1(r11) - mfdbatl r4,1 - stw r4,SL_DBAT1+4(r11) - mfdbatu r4,2 - stw r4,SL_DBAT2(r11) - mfdbatl r4,2 - stw r4,SL_DBAT2+4(r11) - mfdbatu r4,3 - stw r4,SL_DBAT3(r11) - mfdbatl r4,3 - stw r4,SL_DBAT3+4(r11) - mfibatu r4,0 - stw r4,SL_IBAT0(r11) - mfibatl r4,0 - stw r4,SL_IBAT0+4(r11) - mfibatu r4,1 - stw r4,SL_IBAT1(r11) - mfibatl r4,1 - stw r4,SL_IBAT1+4(r11) - mfibatu r4,2 - stw r4,SL_IBAT2(r11) - mfibatl r4,2 - stw r4,SL_IBAT2+4(r11) - mfibatu r4,3 - stw r4,SL_IBAT3(r11) - mfibatl r4,3 - stw r4,SL_IBAT3+4(r11) - -#if 0 - /* Backup various CPU config stuffs */ - bl __save_cpu_setup -#endif - /* Call the low level suspend stuff (we should probably have made - * a stackframe... - */ - bl swsusp_save - - /* Restore LR from the save area */ - lis r11,swsusp_save_area@h - ori r11,r11,swsusp_save_area@l - lwz r0,SL_LR(r11) - mtlr r0 - - blr - - -/* Resume code */ -_GLOBAL(swsusp_arch_resume) - - /* Stop pending alitvec streams and memory accesses */ -BEGIN_FTR_SECTION - DSSALL -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - sync - - /* Disable MSR:DR to make sure we don't take a TLB or - * hash miss during the copy, as our hash table will - * for a while be unuseable. For .text, we assume we are - * covered by a BAT. This works only for non-G5 at this - * point. G5 will need a better approach, possibly using - * a small temporary hash table filled with large mappings, - * disabling the MMU completely isn't a good option for - * performance reasons. - * (Note that 750's may have the same performance issue as - * the G5 in this case, we should investigate using moving - * BATs for these CPUs) - */ - mfmsr r0 - sync - rlwinm r0,r0,0,28,26 /* clear MSR_DR */ - mtmsr r0 - sync - isync - - /* Load ptr the list of pages to copy in r3 */ - lis r11,(pagedir_nosave - KERNELBASE)@h - ori r11,r11,pagedir_nosave@l - lwz r10,0(r11) - - /* Copy the pages. This is a very basic implementation, to - * be replaced by something more cache efficient */ -1: - tophys(r3,r10) - li r0,256 - mtctr r0 - lwz r11,pbe_address(r3) /* source */ - tophys(r5,r11) - lwz r10,pbe_orig_address(r3) /* destination */ - tophys(r6,r10) -2: - lwz r8,0(r5) - lwz r9,4(r5) - lwz r10,8(r5) - lwz r11,12(r5) - addi r5,r5,16 - stw r8,0(r6) - stw r9,4(r6) - stw r10,8(r6) - stw r11,12(r6) - addi r6,r6,16 - bdnz 2b - lwz r10,pbe_next(r3) - cmpwi 0,r10,0 - bne 1b - - /* Do a very simple cache flush/inval of the L1 to ensure - * coherency of the icache - */ - lis r3,0x0002 - mtctr r3 - li r3, 0 -1: - lwz r0,0(r3) - addi r3,r3,0x0020 - bdnz 1b - isync - sync - - /* Now flush those cache lines */ - lis r3,0x0002 - mtctr r3 - li r3, 0 -1: - dcbf 0,r3 - addi r3,r3,0x0020 - bdnz 1b - sync - - /* Ok, we are now running with the kernel data of the old - * kernel fully restored. We can get to the save area - * easily now. As for the rest of the code, it assumes the - * loader kernel and the booted one are exactly identical - */ - lis r11,swsusp_save_area@h - ori r11,r11,swsusp_save_area@l - tophys(r11,r11) - -#if 0 - /* Restore various CPU config stuffs */ - bl __restore_cpu_setup -#endif - /* Restore the BATs, and SDR1. Then we can turn on the MMU. - * This is a bit hairy as we are running out of those BATs, - * but first, our code is probably in the icache, and we are - * writing the same value to the BAT, so that should be fine, - * though a better solution will have to be found long-term - */ - lwz r4,SL_SDR1(r11) - mtsdr1 r4 - lwz r4,SL_SPRG0(r11) - mtsprg 0,r4 - lwz r4,SL_SPRG0+4(r11) - mtsprg 1,r4 - lwz r4,SL_SPRG0+8(r11) - mtsprg 2,r4 - lwz r4,SL_SPRG0+12(r11) - mtsprg 3,r4 - -#if 0 - lwz r4,SL_DBAT0(r11) - mtdbatu 0,r4 - lwz r4,SL_DBAT0+4(r11) - mtdbatl 0,r4 - lwz r4,SL_DBAT1(r11) - mtdbatu 1,r4 - lwz r4,SL_DBAT1+4(r11) - mtdbatl 1,r4 - lwz r4,SL_DBAT2(r11) - mtdbatu 2,r4 - lwz r4,SL_DBAT2+4(r11) - mtdbatl 2,r4 - lwz r4,SL_DBAT3(r11) - mtdbatu 3,r4 - lwz r4,SL_DBAT3+4(r11) - mtdbatl 3,r4 - lwz r4,SL_IBAT0(r11) - mtibatu 0,r4 - lwz r4,SL_IBAT0+4(r11) - mtibatl 0,r4 - lwz r4,SL_IBAT1(r11) - mtibatu 1,r4 - lwz r4,SL_IBAT1+4(r11) - mtibatl 1,r4 - lwz r4,SL_IBAT2(r11) - mtibatu 2,r4 - lwz r4,SL_IBAT2+4(r11) - mtibatl 2,r4 - lwz r4,SL_IBAT3(r11) - mtibatu 3,r4 - lwz r4,SL_IBAT3+4(r11) - mtibatl 3,r4 -#endif - -BEGIN_FTR_SECTION - li r4,0 - mtspr SPRN_DBAT4U,r4 - mtspr SPRN_DBAT4L,r4 - mtspr SPRN_DBAT5U,r4 - mtspr SPRN_DBAT5L,r4 - mtspr SPRN_DBAT6U,r4 - mtspr SPRN_DBAT6L,r4 - mtspr SPRN_DBAT7U,r4 - mtspr SPRN_DBAT7L,r4 - mtspr SPRN_IBAT4U,r4 - mtspr SPRN_IBAT4L,r4 - mtspr SPRN_IBAT5U,r4 - mtspr SPRN_IBAT5L,r4 - mtspr SPRN_IBAT6U,r4 - mtspr SPRN_IBAT6L,r4 - mtspr SPRN_IBAT7U,r4 - mtspr SPRN_IBAT7L,r4 -END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS) - - /* Flush all TLBs */ - lis r4,0x1000 -1: addic. r4,r4,-0x1000 - tlbie r4 - blt 1b - sync - - /* restore the MSR and turn on the MMU */ - lwz r3,SL_MSR(r11) - bl turn_on_mmu - tovirt(r11,r11) - - /* Restore TB */ - li r3,0 - mttbl r3 - lwz r3,SL_TB(r11) - lwz r4,SL_TB+4(r11) - mttbu r3 - mttbl r4 - - /* Kick decrementer */ - li r0,1 - mtdec r0 - - /* Restore the callee-saved registers and return */ - lwz r0,SL_CR(r11) - mtcr r0 - lwz r2,SL_R2(r11) - lmw r12,SL_R12(r11) - lwz r1,SL_SP(r11) - lwz r0,SL_LR(r11) - mtlr r0 - - // XXX Note: we don't really need to call swsusp_resume - - li r3,0 - blr - -/* FIXME:This construct is actually not useful since we don't shut - * down the instruction MMU, we could just flip back MSR-DR on. - */ -turn_on_mmu: - mflr r4 - mtsrr0 r4 - mtsrr1 r3 - sync - isync - rfi - diff --git a/arch/ppc/kernel/temp.c b/arch/ppc/kernel/temp.c deleted file mode 100644 index 26bd8ea35a4..00000000000 --- a/arch/ppc/kernel/temp.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * temp.c Thermal management for cpu's with Thermal Assist Units - * - * Written by Troy Benjegerdes <hozer@drgw.net> - * - * TODO: - * dynamic power management to limit peak CPU temp (using ICTC) - * calibration??? - * - * Silly, crazy ideas: use cpu load (from scheduler) and ICTC to extend battery - * life in portables, and add a 'performance/watt' metric somewhere in /proc - */ - -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/jiffies.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <asm/reg.h> -#include <asm/nvram.h> -#include <asm/cache.h> -#include <asm/8xx_immap.h> -#include <asm/machdep.h> - -static struct tau_temp -{ - int interrupts; - unsigned char low; - unsigned char high; - unsigned char grew; -} tau[NR_CPUS]; - -struct timer_list tau_timer; - -#undef DEBUG - -/* TODO: put these in a /proc interface, with some sanity checks, and maybe - * dynamic adjustment to minimize # of interrupts */ -/* configurable values for step size and how much to expand the window when - * we get an interrupt. These are based on the limit that was out of range */ -#define step_size 2 /* step size when temp goes out of range */ -#define window_expand 1 /* expand the window by this much */ -/* configurable values for shrinking the window */ -#define shrink_timer 2*HZ /* period between shrinking the window */ -#define min_window 2 /* minimum window size, degrees C */ - -void set_thresholds(unsigned long cpu) -{ -#ifdef CONFIG_TAU_INT - /* - * setup THRM1, - * threshold, valid bit, enable interrupts, interrupt when below threshold - */ - mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID); - - /* setup THRM2, - * threshold, valid bit, enable interrupts, interrupt when above threshhold - */ - mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE); -#else - /* same thing but don't enable interrupts */ - mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID); - mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V); -#endif -} - -void TAUupdate(int cpu) -{ - unsigned thrm; - -#ifdef DEBUG - printk("TAUupdate "); -#endif - - /* if both thresholds are crossed, the step_sizes cancel out - * and the window winds up getting expanded twice. */ - if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */ - if(thrm & THRM1_TIN){ /* crossed low threshold */ - if (tau[cpu].low >= step_size){ - tau[cpu].low -= step_size; - tau[cpu].high -= (step_size - window_expand); - } - tau[cpu].grew = 1; -#ifdef DEBUG - printk("low threshold crossed "); -#endif - } - } - if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */ - if(thrm & THRM1_TIN){ /* crossed high threshold */ - if (tau[cpu].high <= 127-step_size){ - tau[cpu].low += (step_size - window_expand); - tau[cpu].high += step_size; - } - tau[cpu].grew = 1; -#ifdef DEBUG - printk("high threshold crossed "); -#endif - } - } - -#ifdef DEBUG - printk("grew = %d\n", tau[cpu].grew); -#endif - -#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */ - set_thresholds(cpu); -#endif - -} - -#ifdef CONFIG_TAU_INT -/* - * TAU interrupts - called when we have a thermal assist unit interrupt - * with interrupts disabled - */ - -void TAUException(struct pt_regs * regs) -{ - int cpu = smp_processor_id(); - - irq_enter(); - tau[cpu].interrupts++; - - TAUupdate(cpu); - - irq_exit(); -} -#endif /* CONFIG_TAU_INT */ - -static void tau_timeout(void * info) -{ - int cpu; - unsigned long flags; - int size; - int shrink; - - /* disabling interrupts *should* be okay */ - local_irq_save(flags); - cpu = smp_processor_id(); - -#ifndef CONFIG_TAU_INT - TAUupdate(cpu); -#endif - - size = tau[cpu].high - tau[cpu].low; - if (size > min_window && ! tau[cpu].grew) { - /* do an exponential shrink of half the amount currently over size */ - shrink = (2 + size - min_window) / 4; - if (shrink) { - tau[cpu].low += shrink; - tau[cpu].high -= shrink; - } else { /* size must have been min_window + 1 */ - tau[cpu].low += 1; -#if 1 /* debug */ - if ((tau[cpu].high - tau[cpu].low) != min_window){ - printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__); - } -#endif - } - } - - tau[cpu].grew = 0; - - set_thresholds(cpu); - - /* - * Do the enable every time, since otherwise a bunch of (relatively) - * complex sleep code needs to be added. One mtspr every time - * tau_timeout is called is probably not a big deal. - * - * Enable thermal sensor and set up sample interval timer - * need 20 us to do the compare.. until a nice 'cpu_speed' function - * call is implemented, just assume a 500 mhz clock. It doesn't really - * matter if we take too long for a compare since it's all interrupt - * driven anyway. - * - * use a extra long time.. (60 us @ 500 mhz) - */ - mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E); - - local_irq_restore(flags); -} - -static void tau_timeout_smp(unsigned long unused) -{ - - /* schedule ourselves to be run again */ - mod_timer(&tau_timer, jiffies + shrink_timer) ; - on_each_cpu(tau_timeout, NULL, 1, 0); -} - -/* - * setup the TAU - * - * Set things up to use THRM1 as a temperature lower bound, and THRM2 as an upper bound. - * Start off at zero - */ - -int tau_initialized = 0; - -void __init TAU_init_smp(void * info) -{ - unsigned long cpu = smp_processor_id(); - - /* set these to a reasonable value and let the timer shrink the - * window */ - tau[cpu].low = 5; - tau[cpu].high = 120; - - set_thresholds(cpu); -} - -int __init TAU_init(void) -{ - /* We assume in SMP that if one CPU has TAU support, they - * all have it --BenH - */ - if (!cpu_has_feature(CPU_FTR_TAU)) { - printk("Thermal assist unit not available\n"); - tau_initialized = 0; - return 1; - } - - - /* first, set up the window shrinking timer */ - init_timer(&tau_timer); - tau_timer.function = tau_timeout_smp; - tau_timer.expires = jiffies + shrink_timer; - add_timer(&tau_timer); - - on_each_cpu(TAU_init_smp, NULL, 1, 0); - - printk("Thermal assist unit "); -#ifdef CONFIG_TAU_INT - printk("using interrupts, "); -#else - printk("using timers, "); -#endif - printk("shrink_timer: %d jiffies\n", shrink_timer); - tau_initialized = 1; - - return 0; -} - -__initcall(TAU_init); - -/* - * return current temp - */ - -u32 cpu_temp_both(unsigned long cpu) -{ - return ((tau[cpu].high << 16) | tau[cpu].low); -} - -int cpu_temp(unsigned long cpu) -{ - return ((tau[cpu].high + tau[cpu].low) / 2); -} - -int tau_interrupts(unsigned long cpu) -{ - return (tau[cpu].interrupts); -} diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 6d0a1838d94..1c0d68026ab 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/traps.c - * * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * This program is free software; you can redistribute it and/or diff --git a/arch/ppc/lib/rheap.c b/arch/ppc/lib/rheap.c index 42c5de2c898..31e511856dc 100644 --- a/arch/ppc/lib/rheap.c +++ b/arch/ppc/lib/rheap.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/rheap.c - * * A Remote Heap. Remote means that we don't touch the memory that the * heap points to. Normal heap implementations use the memory they manage * to place their list. We cannot do that because the memory we manage may diff --git a/arch/ppc/lib/strcase.c b/arch/ppc/lib/strcase.c index 36b521091bb..3b0094cc2b5 100644 --- a/arch/ppc/lib/strcase.c +++ b/arch/ppc/lib/strcase.c @@ -1,4 +1,5 @@ #include <linux/ctype.h> +#include <linux/types.h> int strcasecmp(const char *s1, const char *s2) { @@ -11,7 +12,7 @@ int strcasecmp(const char *s1, const char *s2) return c1 - c2; } -int strncasecmp(const char *s1, const char *s2, int n) +int strncasecmp(const char *s1, const char *s2, size_t n) { int c1, c2; diff --git a/arch/ppc/math-emu/Makefile b/arch/ppc/math-emu/Makefile deleted file mode 100644 index 754143e8936..00000000000 --- a/arch/ppc/math-emu/Makefile +++ /dev/null @@ -1,13 +0,0 @@ - -obj-y := math.o fmr.o lfd.o stfd.o - -obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \ - fctiw.o fctiwz.o fdiv.o fdivs.o \ - fmadd.o fmadds.o fmsub.o fmsubs.o \ - fmul.o fmuls.o fnabs.o fneg.o types.o \ - fnmadd.o fnmadds.o fnmsub.o fnmsubs.o \ - fres.o frsp.o frsqrte.o fsel.o lfs.o \ - fsqrt.o fsqrts.o fsub.o fsubs.o \ - mcrfs.o mffs.o mtfsb0.o mtfsb1.o \ - mtfsf.o mtfsfi.o stfiwx.o stfs.o \ - udivmodti4.o diff --git a/arch/ppc/math-emu/double.h b/arch/ppc/math-emu/double.h deleted file mode 100644 index ffba8b67f05..00000000000 --- a/arch/ppc/math-emu/double.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Definitions for IEEE Double Precision - */ - -#if _FP_W_TYPE_SIZE < 32 -#error "Here's a nickel kid. Go buy yourself a real computer." -#endif - -#if _FP_W_TYPE_SIZE < 64 -#define _FP_FRACTBITS_D (2 * _FP_W_TYPE_SIZE) -#else -#define _FP_FRACTBITS_D _FP_W_TYPE_SIZE -#endif - -#define _FP_FRACBITS_D 53 -#define _FP_FRACXBITS_D (_FP_FRACTBITS_D - _FP_FRACBITS_D) -#define _FP_WFRACBITS_D (_FP_WORKBITS + _FP_FRACBITS_D) -#define _FP_WFRACXBITS_D (_FP_FRACTBITS_D - _FP_WFRACBITS_D) -#define _FP_EXPBITS_D 11 -#define _FP_EXPBIAS_D 1023 -#define _FP_EXPMAX_D 2047 - -#define _FP_QNANBIT_D \ - ((_FP_W_TYPE)1 << ((_FP_FRACBITS_D-2) % _FP_W_TYPE_SIZE)) -#define _FP_IMPLBIT_D \ - ((_FP_W_TYPE)1 << ((_FP_FRACBITS_D-1) % _FP_W_TYPE_SIZE)) -#define _FP_OVERFLOW_D \ - ((_FP_W_TYPE)1 << (_FP_WFRACBITS_D % _FP_W_TYPE_SIZE)) - -#if _FP_W_TYPE_SIZE < 64 - -union _FP_UNION_D -{ - double flt; - struct { -#if __BYTE_ORDER == __BIG_ENDIAN - unsigned sign : 1; - unsigned exp : _FP_EXPBITS_D; - unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE; - unsigned frac0 : _FP_W_TYPE_SIZE; -#else - unsigned frac0 : _FP_W_TYPE_SIZE; - unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE; - unsigned exp : _FP_EXPBITS_D; - unsigned sign : 1; -#endif - } bits __attribute__((packed)); -}; - -#define FP_DECL_D(X) _FP_DECL(2,X) -#define FP_UNPACK_RAW_D(X,val) _FP_UNPACK_RAW_2(D,X,val) -#define FP_PACK_RAW_D(val,X) _FP_PACK_RAW_2(D,val,X) - -#define FP_UNPACK_D(X,val) \ - do { \ - _FP_UNPACK_RAW_2(D,X,val); \ - _FP_UNPACK_CANONICAL(D,2,X); \ - } while (0) - -#define FP_PACK_D(val,X) \ - do { \ - _FP_PACK_CANONICAL(D,2,X); \ - _FP_PACK_RAW_2(D,val,X); \ - } while (0) - -#define FP_NEG_D(R,X) _FP_NEG(D,2,R,X) -#define FP_ADD_D(R,X,Y) _FP_ADD(D,2,R,X,Y) -#define FP_SUB_D(R,X,Y) _FP_SUB(D,2,R,X,Y) -#define FP_MUL_D(R,X,Y) _FP_MUL(D,2,R,X,Y) -#define FP_DIV_D(R,X,Y) _FP_DIV(D,2,R,X,Y) -#define FP_SQRT_D(R,X) _FP_SQRT(D,2,R,X) - -#define FP_CMP_D(r,X,Y,un) _FP_CMP(D,2,r,X,Y,un) -#define FP_CMP_EQ_D(r,X,Y) _FP_CMP_EQ(D,2,r,X,Y) - -#define FP_TO_INT_D(r,X,rsz,rsg) _FP_TO_INT(D,2,r,X,rsz,rsg) -#define FP_FROM_INT_D(X,r,rs,rt) _FP_FROM_INT(D,2,X,r,rs,rt) - -#else - -union _FP_UNION_D -{ - double flt; - struct { -#if __BYTE_ORDER == __BIG_ENDIAN - unsigned sign : 1; - unsigned exp : _FP_EXPBITS_D; - unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0); -#else - unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0); - unsigned exp : _FP_EXPBITS_D; - unsigned sign : 1; -#endif - } bits __attribute__((packed)); -}; - -#define FP_DECL_D(X) _FP_DECL(1,X) -#define FP_UNPACK_RAW_D(X,val) _FP_UNPACK_RAW_1(D,X,val) -#define FP_PACK_RAW_D(val,X) _FP_PACK_RAW_1(D,val,X) - -#define FP_UNPACK_D(X,val) \ - do { \ - _FP_UNPACK_RAW_1(D,X,val); \ - _FP_UNPACK_CANONICAL(D,1,X); \ - } while (0) - -#define FP_PACK_D(val,X) \ - do { \ - _FP_PACK_CANONICAL(D,1,X); \ - _FP_PACK_RAW_1(D,val,X); \ - } while (0) - -#define FP_NEG_D(R,X) _FP_NEG(D,1,R,X) -#define FP_ADD_D(R,X,Y) _FP_ADD(D,1,R,X,Y) -#define FP_SUB_D(R,X,Y) _FP_SUB(D,1,R,X,Y) -#define FP_MUL_D(R,X,Y) _FP_MUL(D,1,R,X,Y) -#define FP_DIV_D(R,X,Y) _FP_DIV(D,1,R,X,Y) -#define FP_SQRT_D(R,X) _FP_SQRT(D,1,R,X) - -/* The implementation of _FP_MUL_D and _FP_DIV_D should be chosen by - the target machine. */ - -#define FP_CMP_D(r,X,Y,un) _FP_CMP(D,1,r,X,Y,un) -#define FP_CMP_EQ_D(r,X,Y) _FP_CMP_EQ(D,1,r,X,Y) - -#define FP_TO_INT_D(r,X,rsz,rsg) _FP_TO_INT(D,1,r,X,rsz,rsg) -#define FP_FROM_INT_D(X,r,rs,rt) _FP_FROM_INT(D,1,X,r,rs,rt) - -#endif /* W_TYPE_SIZE < 64 */ diff --git a/arch/ppc/math-emu/fabs.c b/arch/ppc/math-emu/fabs.c deleted file mode 100644 index 41f0617f3d3..00000000000 --- a/arch/ppc/math-emu/fabs.c +++ /dev/null @@ -1,18 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -int -fabs(u32 *frD, u32 *frB) -{ - frD[0] = frB[0] & 0x7fffffff; - frD[1] = frB[1]; - -#ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); - dump_double(frD); - printk("\n"); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/fadd.c b/arch/ppc/math-emu/fadd.c deleted file mode 100644 index fc8836488b6..00000000000 --- a/arch/ppc/math-emu/fadd.c +++ /dev/null @@ -1,38 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fadd(void *frD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, A, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_D(frD, R)); -} diff --git a/arch/ppc/math-emu/fadds.c b/arch/ppc/math-emu/fadds.c deleted file mode 100644 index 93025b6c8f3..00000000000 --- a/arch/ppc/math-emu/fadds.c +++ /dev/null @@ -1,39 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -fadds(void *frD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, A, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_DS(frD, R)); -} diff --git a/arch/ppc/math-emu/fcmpo.c b/arch/ppc/math-emu/fcmpo.c deleted file mode 100644 index 4efac394b4c..00000000000 --- a/arch/ppc/math-emu/fcmpo.c +++ /dev/null @@ -1,46 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fcmpo(u32 *ccr, int crfD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - int code[4] = { (1 << 3), (1 << 1), (1 << 2), (1 << 0) }; - long cmp; - int ret = 0; - -#ifdef DEBUG - printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - if (A_c == FP_CLS_NAN || B_c == FP_CLS_NAN) - ret |= EFLAG_VXVC; - - FP_CMP_D(cmp, A, B, 2); - cmp = code[(cmp + 1) & 3]; - - __FPU_FPSCR &= ~(0x1f000); - __FPU_FPSCR |= (cmp << 12); - - *ccr &= ~(15 << ((7 - crfD) << 2)); - *ccr |= (cmp << ((7 - crfD) << 2)); - -#ifdef DEBUG - printk("CR: %08x\n", *ccr); -#endif - - return ret; -} diff --git a/arch/ppc/math-emu/fcmpu.c b/arch/ppc/math-emu/fcmpu.c deleted file mode 100644 index b7e33176e61..00000000000 --- a/arch/ppc/math-emu/fcmpu.c +++ /dev/null @@ -1,42 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fcmpu(u32 *ccr, int crfD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - int code[4] = { (1 << 3), (1 << 1), (1 << 2), (1 << 0) }; - long cmp; - -#ifdef DEBUG - printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - FP_CMP_D(cmp, A, B, 2); - cmp = code[(cmp + 1) & 3]; - - __FPU_FPSCR &= ~(0x1f000); - __FPU_FPSCR |= (cmp << 12); - - *ccr &= ~(15 << ((7 - crfD) << 2)); - *ccr |= (cmp << ((7 - crfD) << 2)); - -#ifdef DEBUG - printk("CR: %08x\n", *ccr); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/fctiw.c b/arch/ppc/math-emu/fctiw.c deleted file mode 100644 index 3b3c98b840c..00000000000 --- a/arch/ppc/math-emu/fctiw.c +++ /dev/null @@ -1,25 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fctiw(u32 *frD, void *frB) -{ - FP_DECL_D(B); - unsigned int r; - - __FP_UNPACK_D(B, frB); - FP_TO_INT_D(r, B, 32, 1); - frD[1] = r; - -#ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); - dump_double(frD); - printk("\n"); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/fctiwz.c b/arch/ppc/math-emu/fctiwz.c deleted file mode 100644 index 7717eb6fcfb..00000000000 --- a/arch/ppc/math-emu/fctiwz.c +++ /dev/null @@ -1,32 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fctiwz(u32 *frD, void *frB) -{ - FP_DECL_D(B); - u32 fpscr; - unsigned int r; - - fpscr = __FPU_FPSCR; - __FPU_FPSCR &= ~(3); - __FPU_FPSCR |= FP_RND_ZERO; - - __FP_UNPACK_D(B, frB); - FP_TO_INT_D(r, B, 32, 1); - frD[1] = r; - - __FPU_FPSCR = fpscr; - -#ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); - dump_double(frD); - printk("\n"); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/fdiv.c b/arch/ppc/math-emu/fdiv.c deleted file mode 100644 index f2fba825b2d..00000000000 --- a/arch/ppc/math-emu/fdiv.c +++ /dev/null @@ -1,53 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fdiv(void *frD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) { - ret |= EFLAG_VXZDZ; -#ifdef DEBUG - printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__); -#endif - } - if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) { - ret |= EFLAG_VXIDI; -#ifdef DEBUG - printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__); -#endif - } - - if (B_c == FP_CLS_ZERO && A_c != FP_CLS_ZERO) { - ret |= EFLAG_DIVZERO; - if (__FPU_TRAP_P(EFLAG_DIVZERO)) - return ret; - } - FP_DIV_D(R, A, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_D(frD, R)); -} diff --git a/arch/ppc/math-emu/fdivs.c b/arch/ppc/math-emu/fdivs.c deleted file mode 100644 index b971196e317..00000000000 --- a/arch/ppc/math-emu/fdivs.c +++ /dev/null @@ -1,55 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -fdivs(void *frD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) { - ret |= EFLAG_VXZDZ; -#ifdef DEBUG - printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__); -#endif - } - if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) { - ret |= EFLAG_VXIDI; -#ifdef DEBUG - printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__); -#endif - } - - if (B_c == FP_CLS_ZERO && A_c != FP_CLS_ZERO) { - ret |= EFLAG_DIVZERO; - if (__FPU_TRAP_P(EFLAG_DIVZERO)) - return ret; - } - - FP_DIV_D(R, A, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_DS(frD, R)); -} diff --git a/arch/ppc/math-emu/fmadd.c b/arch/ppc/math-emu/fmadd.c deleted file mode 100644 index 0a1dbce793e..00000000000 --- a/arch/ppc/math-emu/fmadd.c +++ /dev/null @@ -1,48 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fmadd(void *frD, void *frA, void *frB, void *frC) -{ - FP_DECL_D(R); - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(C); - FP_DECL_D(T); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - __FP_UNPACK_D(C, frC); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); - printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); -#endif - - if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(T, A, C); - - if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, T, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_D(frD, R)); -} diff --git a/arch/ppc/math-emu/fmadds.c b/arch/ppc/math-emu/fmadds.c deleted file mode 100644 index 0f70bba9445..00000000000 --- a/arch/ppc/math-emu/fmadds.c +++ /dev/null @@ -1,49 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -fmadds(void *frD, void *frA, void *frB, void *frC) -{ - FP_DECL_D(R); - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(C); - FP_DECL_D(T); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - __FP_UNPACK_D(C, frC); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); - printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); -#endif - - if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(T, A, C); - - if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, T, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_DS(frD, R)); -} diff --git a/arch/ppc/math-emu/fmr.c b/arch/ppc/math-emu/fmr.c deleted file mode 100644 index 28df700c0c7..00000000000 --- a/arch/ppc/math-emu/fmr.c +++ /dev/null @@ -1,18 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -int -fmr(u32 *frD, u32 *frB) -{ - frD[0] = frB[0]; - frD[1] = frB[1]; - -#ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); - dump_double(frD); - printk("\n"); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/fmsub.c b/arch/ppc/math-emu/fmsub.c deleted file mode 100644 index 203fd48a6fe..00000000000 --- a/arch/ppc/math-emu/fmsub.c +++ /dev/null @@ -1,51 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fmsub(void *frD, void *frA, void *frB, void *frC) -{ - FP_DECL_D(R); - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(C); - FP_DECL_D(T); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - __FP_UNPACK_D(C, frC); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); - printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); -#endif - - if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(T, A, C); - - if (B_c != FP_CLS_NAN) - B_s ^= 1; - - if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, T, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_D(frD, R)); -} diff --git a/arch/ppc/math-emu/fmsubs.c b/arch/ppc/math-emu/fmsubs.c deleted file mode 100644 index 8ce68624c18..00000000000 --- a/arch/ppc/math-emu/fmsubs.c +++ /dev/null @@ -1,52 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -fmsubs(void *frD, void *frA, void *frB, void *frC) -{ - FP_DECL_D(R); - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(C); - FP_DECL_D(T); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - __FP_UNPACK_D(C, frC); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); - printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); -#endif - - if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(T, A, C); - - if (B_c != FP_CLS_NAN) - B_s ^= 1; - - if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, T, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_DS(frD, R)); -} diff --git a/arch/ppc/math-emu/fmul.c b/arch/ppc/math-emu/fmul.c deleted file mode 100644 index 66c7e79aae2..00000000000 --- a/arch/ppc/math-emu/fmul.c +++ /dev/null @@ -1,42 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fmul(void *frD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", - A_s, A_f1, A_f0, A_e, A_c, A_f1, A_f0, A_e + 1023); - printk("B: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", - B_s, B_f1, B_f0, B_e, B_c, B_f1, B_f0, B_e + 1023); -#endif - - if ((A_c == FP_CLS_INF && B_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && B_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(R, A, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", - R_s, R_f1, R_f0, R_e, R_c, R_f1, R_f0, R_e + 1023); -#endif - - return (ret | __FP_PACK_D(frD, R)); -} diff --git a/arch/ppc/math-emu/fmuls.c b/arch/ppc/math-emu/fmuls.c deleted file mode 100644 index 26bc4278271..00000000000 --- a/arch/ppc/math-emu/fmuls.c +++ /dev/null @@ -1,43 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -fmuls(void *frD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", - A_s, A_f1, A_f0, A_e, A_c, A_f1, A_f0, A_e + 1023); - printk("B: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", - B_s, B_f1, B_f0, B_e, B_c, B_f1, B_f0, B_e + 1023); -#endif - - if ((A_c == FP_CLS_INF && B_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && B_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(R, A, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n", - R_s, R_f1, R_f0, R_e, R_c, R_f1, R_f0, R_e + 1023); -#endif - - return (ret | __FP_PACK_DS(frD, R)); -} diff --git a/arch/ppc/math-emu/fnabs.c b/arch/ppc/math-emu/fnabs.c deleted file mode 100644 index c6b913d179e..00000000000 --- a/arch/ppc/math-emu/fnabs.c +++ /dev/null @@ -1,18 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -int -fnabs(u32 *frD, u32 *frB) -{ - frD[0] = frB[0] | 0x80000000; - frD[1] = frB[1]; - -#ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); - dump_double(frD); - printk("\n"); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/fneg.c b/arch/ppc/math-emu/fneg.c deleted file mode 100644 index fe9a98deff6..00000000000 --- a/arch/ppc/math-emu/fneg.c +++ /dev/null @@ -1,18 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -int -fneg(u32 *frD, u32 *frB) -{ - frD[0] = frB[0] ^ 0x80000000; - frD[1] = frB[1]; - -#ifdef DEBUG - printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB); - dump_double(frD); - printk("\n"); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/fnmadd.c b/arch/ppc/math-emu/fnmadd.c deleted file mode 100644 index 7f312276d92..00000000000 --- a/arch/ppc/math-emu/fnmadd.c +++ /dev/null @@ -1,51 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fnmadd(void *frD, void *frA, void *frB, void *frC) -{ - FP_DECL_D(R); - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(C); - FP_DECL_D(T); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - __FP_UNPACK_D(C, frC); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); - printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); -#endif - - if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(T, A, C); - - if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, T, B); - - if (R_c != FP_CLS_NAN) - R_s ^= 1; - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_D(frD, R)); -} diff --git a/arch/ppc/math-emu/fnmadds.c b/arch/ppc/math-emu/fnmadds.c deleted file mode 100644 index 65454c9c70b..00000000000 --- a/arch/ppc/math-emu/fnmadds.c +++ /dev/null @@ -1,52 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -fnmadds(void *frD, void *frA, void *frB, void *frC) -{ - FP_DECL_D(R); - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(C); - FP_DECL_D(T); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - __FP_UNPACK_D(C, frC); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); - printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); -#endif - - if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(T, A, C); - - if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, T, B); - - if (R_c != FP_CLS_NAN) - R_s ^= 1; - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_DS(frD, R)); -} diff --git a/arch/ppc/math-emu/fnmsub.c b/arch/ppc/math-emu/fnmsub.c deleted file mode 100644 index f1ca7482b5f..00000000000 --- a/arch/ppc/math-emu/fnmsub.c +++ /dev/null @@ -1,54 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fnmsub(void *frD, void *frA, void *frB, void *frC) -{ - FP_DECL_D(R); - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(C); - FP_DECL_D(T); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - __FP_UNPACK_D(C, frC); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); - printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); -#endif - - if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(T, A, C); - - if (B_c != FP_CLS_NAN) - B_s ^= 1; - - if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, T, B); - - if (R_c != FP_CLS_NAN) - R_s ^= 1; - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_D(frD, R)); -} diff --git a/arch/ppc/math-emu/fnmsubs.c b/arch/ppc/math-emu/fnmsubs.c deleted file mode 100644 index 5c9a09a87dc..00000000000 --- a/arch/ppc/math-emu/fnmsubs.c +++ /dev/null @@ -1,55 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -fnmsubs(void *frD, void *frA, void *frB, void *frC) -{ - FP_DECL_D(R); - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(C); - FP_DECL_D(T); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - __FP_UNPACK_D(C, frC); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); - printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c); -#endif - - if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) || - (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF)) - ret |= EFLAG_VXIMZ; - - FP_MUL_D(T, A, C); - - if (B_c != FP_CLS_NAN) - B_s ^= 1; - - if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, T, B); - - if (R_c != FP_CLS_NAN) - R_s ^= 1; - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_DS(frD, R)); -} diff --git a/arch/ppc/math-emu/fres.c b/arch/ppc/math-emu/fres.c deleted file mode 100644 index ec11e46d20a..00000000000 --- a/arch/ppc/math-emu/fres.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -int -fres(void *frD, void *frB) -{ -#ifdef DEBUG - printk("%s: %p %p\n", __FUNCTION__, frD, frB); -#endif - return -ENOSYS; -} diff --git a/arch/ppc/math-emu/frsp.c b/arch/ppc/math-emu/frsp.c deleted file mode 100644 index d879b2a3d0c..00000000000 --- a/arch/ppc/math-emu/frsp.c +++ /dev/null @@ -1,25 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -frsp(void *frD, void *frB) -{ - FP_DECL_D(B); - -#ifdef DEBUG - printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB); -#endif - - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - return __FP_PACK_DS(frD, B); -} diff --git a/arch/ppc/math-emu/frsqrte.c b/arch/ppc/math-emu/frsqrte.c deleted file mode 100644 index a11ae182985..00000000000 --- a/arch/ppc/math-emu/frsqrte.c +++ /dev/null @@ -1,12 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -int -frsqrte(void *frD, void *frB) -{ -#ifdef DEBUG - printk("%s: %p %p\n", __FUNCTION__, frD, frB); -#endif - return 0; -} diff --git a/arch/ppc/math-emu/fsel.c b/arch/ppc/math-emu/fsel.c deleted file mode 100644 index e36e6e72819..00000000000 --- a/arch/ppc/math-emu/fsel.c +++ /dev/null @@ -1,38 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fsel(u32 *frD, void *frA, u32 *frB, u32 *frC) -{ - FP_DECL_D(A); - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC); -#endif - - __FP_UNPACK_D(A, frA); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %08x %08x\n", frB[0], frB[1]); - printk("C: %08x %08x\n", frC[0], frC[1]); -#endif - - if (A_c == FP_CLS_NAN || (A_c != FP_CLS_ZERO && A_s)) { - frD[0] = frB[0]; - frD[1] = frB[1]; - } else { - frD[0] = frC[0]; - frD[1] = frC[1]; - } - -#ifdef DEBUG - printk("D: %08x.%08x\n", frD[0], frD[1]); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/fsqrt.c b/arch/ppc/math-emu/fsqrt.c deleted file mode 100644 index 6f8319f64a8..00000000000 --- a/arch/ppc/math-emu/fsqrt.c +++ /dev/null @@ -1,37 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fsqrt(void *frD, void *frB) -{ - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB); -#endif - - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - if (B_s && B_c != FP_CLS_ZERO) - ret |= EFLAG_VXSQRT; - if (B_c == FP_CLS_NAN) - ret |= EFLAG_VXSNAN; - - FP_SQRT_D(R, B); - -#ifdef DEBUG - printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_D(frD, R)); -} diff --git a/arch/ppc/math-emu/fsqrts.c b/arch/ppc/math-emu/fsqrts.c deleted file mode 100644 index 3b2b1cf55c1..00000000000 --- a/arch/ppc/math-emu/fsqrts.c +++ /dev/null @@ -1,38 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -fsqrts(void *frD, void *frB) -{ - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB); -#endif - - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - if (B_s && B_c != FP_CLS_ZERO) - ret |= EFLAG_VXSQRT; - if (B_c == FP_CLS_NAN) - ret |= EFLAG_VXSNAN; - - FP_SQRT_D(R, B); - -#ifdef DEBUG - printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_DS(frD, R)); -} diff --git a/arch/ppc/math-emu/fsub.c b/arch/ppc/math-emu/fsub.c deleted file mode 100644 index 956679042bb..00000000000 --- a/arch/ppc/math-emu/fsub.c +++ /dev/null @@ -1,41 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" - -int -fsub(void *frD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - if (B_c != FP_CLS_NAN) - B_s ^= 1; - - if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, A, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_D(frD, R)); -} diff --git a/arch/ppc/math-emu/fsubs.c b/arch/ppc/math-emu/fsubs.c deleted file mode 100644 index 3428117dfe8..00000000000 --- a/arch/ppc/math-emu/fsubs.c +++ /dev/null @@ -1,42 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -fsubs(void *frD, void *frA, void *frB) -{ - FP_DECL_D(A); - FP_DECL_D(B); - FP_DECL_D(R); - int ret = 0; - -#ifdef DEBUG - printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB); -#endif - - __FP_UNPACK_D(A, frA); - __FP_UNPACK_D(B, frB); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); - printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c); -#endif - - if (B_c != FP_CLS_NAN) - B_s ^= 1; - - if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF) - ret |= EFLAG_VXISI; - - FP_ADD_D(R, A, B); - -#ifdef DEBUG - printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return (ret | __FP_PACK_DS(frD, R)); -} diff --git a/arch/ppc/math-emu/lfd.c b/arch/ppc/math-emu/lfd.c deleted file mode 100644 index 7d38101c329..00000000000 --- a/arch/ppc/math-emu/lfd.c +++ /dev/null @@ -1,19 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "sfp-machine.h" -#include "double.h" - -int -lfd(void *frD, void *ea) -{ - if (copy_from_user(frD, ea, sizeof(double))) - return -EFAULT; -#ifdef DEBUG - printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea); - dump_double(frD); - printk("\n"); -#endif - return 0; -} diff --git a/arch/ppc/math-emu/lfs.c b/arch/ppc/math-emu/lfs.c deleted file mode 100644 index c86dee3d765..00000000000 --- a/arch/ppc/math-emu/lfs.c +++ /dev/null @@ -1,37 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -lfs(void *frD, void *ea) -{ - FP_DECL_D(R); - FP_DECL_S(A); - float f; - -#ifdef DEBUG - printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea); -#endif - - if (copy_from_user(&f, ea, sizeof(float))) - return -EFAULT; - - __FP_UNPACK_S(A, &f); - -#ifdef DEBUG - printk("A: %ld %lu %ld (%ld) [%08lx]\n", A_s, A_f, A_e, A_c, - *(unsigned long *)&f); -#endif - - FP_CONV(D, S, 2, 1, R, A); - -#ifdef DEBUG - printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c); -#endif - - return __FP_PACK_D(frD, R); -} diff --git a/arch/ppc/math-emu/math.c b/arch/ppc/math-emu/math.c deleted file mode 100644 index b7dff53a710..00000000000 --- a/arch/ppc/math-emu/math.c +++ /dev/null @@ -1,485 +0,0 @@ -/* - * arch/ppc/math-emu/math.c - * - * Copyright (C) 1999 Eddie C. Dost (ecd@atecom.com) - */ - -#include <linux/config.h> -#include <linux/types.h> -#include <linux/sched.h> - -#include <asm/uaccess.h> -#include <asm/reg.h> - -#include "sfp-machine.h" -#include "double.h" - -#define FLOATFUNC(x) extern int x(void *, void *, void *, void *) - -FLOATFUNC(fadd); -FLOATFUNC(fadds); -FLOATFUNC(fdiv); -FLOATFUNC(fdivs); -FLOATFUNC(fmul); -FLOATFUNC(fmuls); -FLOATFUNC(fsub); -FLOATFUNC(fsubs); - -FLOATFUNC(fmadd); -FLOATFUNC(fmadds); -FLOATFUNC(fmsub); -FLOATFUNC(fmsubs); -FLOATFUNC(fnmadd); -FLOATFUNC(fnmadds); -FLOATFUNC(fnmsub); -FLOATFUNC(fnmsubs); - -FLOATFUNC(fctiw); -FLOATFUNC(fctiwz); -FLOATFUNC(frsp); - -FLOATFUNC(fcmpo); -FLOATFUNC(fcmpu); - -FLOATFUNC(mcrfs); -FLOATFUNC(mffs); -FLOATFUNC(mtfsb0); -FLOATFUNC(mtfsb1); -FLOATFUNC(mtfsf); -FLOATFUNC(mtfsfi); - -FLOATFUNC(lfd); -FLOATFUNC(lfs); - -FLOATFUNC(stfd); -FLOATFUNC(stfs); -FLOATFUNC(stfiwx); - -FLOATFUNC(fabs); -FLOATFUNC(fmr); -FLOATFUNC(fnabs); -FLOATFUNC(fneg); - -/* Optional */ -FLOATFUNC(fres); -FLOATFUNC(frsqrte); -FLOATFUNC(fsel); -FLOATFUNC(fsqrt); -FLOATFUNC(fsqrts); - - -#define OP31 0x1f /* 31 */ -#define LFS 0x30 /* 48 */ -#define LFSU 0x31 /* 49 */ -#define LFD 0x32 /* 50 */ -#define LFDU 0x33 /* 51 */ -#define STFS 0x34 /* 52 */ -#define STFSU 0x35 /* 53 */ -#define STFD 0x36 /* 54 */ -#define STFDU 0x37 /* 55 */ -#define OP59 0x3b /* 59 */ -#define OP63 0x3f /* 63 */ - -/* Opcode 31: */ -/* X-Form: */ -#define LFSX 0x217 /* 535 */ -#define LFSUX 0x237 /* 567 */ -#define LFDX 0x257 /* 599 */ -#define LFDUX 0x277 /* 631 */ -#define STFSX 0x297 /* 663 */ -#define STFSUX 0x2b7 /* 695 */ -#define STFDX 0x2d7 /* 727 */ -#define STFDUX 0x2f7 /* 759 */ -#define STFIWX 0x3d7 /* 983 */ - -/* Opcode 59: */ -/* A-Form: */ -#define FDIVS 0x012 /* 18 */ -#define FSUBS 0x014 /* 20 */ -#define FADDS 0x015 /* 21 */ -#define FSQRTS 0x016 /* 22 */ -#define FRES 0x018 /* 24 */ -#define FMULS 0x019 /* 25 */ -#define FMSUBS 0x01c /* 28 */ -#define FMADDS 0x01d /* 29 */ -#define FNMSUBS 0x01e /* 30 */ -#define FNMADDS 0x01f /* 31 */ - -/* Opcode 63: */ -/* A-Form: */ -#define FDIV 0x012 /* 18 */ -#define FSUB 0x014 /* 20 */ -#define FADD 0x015 /* 21 */ -#define FSQRT 0x016 /* 22 */ -#define FSEL 0x017 /* 23 */ -#define FMUL 0x019 /* 25 */ -#define FRSQRTE 0x01a /* 26 */ -#define FMSUB 0x01c /* 28 */ -#define FMADD 0x01d /* 29 */ -#define FNMSUB 0x01e /* 30 */ -#define FNMADD 0x01f /* 31 */ - -/* X-Form: */ -#define FCMPU 0x000 /* 0 */ -#define FRSP 0x00c /* 12 */ -#define FCTIW 0x00e /* 14 */ -#define FCTIWZ 0x00f /* 15 */ -#define FCMPO 0x020 /* 32 */ -#define MTFSB1 0x026 /* 38 */ -#define FNEG 0x028 /* 40 */ -#define MCRFS 0x040 /* 64 */ -#define MTFSB0 0x046 /* 70 */ -#define FMR 0x048 /* 72 */ -#define MTFSFI 0x086 /* 134 */ -#define FNABS 0x088 /* 136 */ -#define FABS 0x108 /* 264 */ -#define MFFS 0x247 /* 583 */ -#define MTFSF 0x2c7 /* 711 */ - - -#define AB 2 -#define AC 3 -#define ABC 4 -#define D 5 -#define DU 6 -#define X 7 -#define XA 8 -#define XB 9 -#define XCR 11 -#define XCRB 12 -#define XCRI 13 -#define XCRL 16 -#define XE 14 -#define XEU 15 -#define XFLB 10 - -#ifdef CONFIG_MATH_EMULATION -static int -record_exception(struct pt_regs *regs, int eflag) -{ - u32 fpscr; - - fpscr = __FPU_FPSCR; - - if (eflag) { - fpscr |= FPSCR_FX; - if (eflag & EFLAG_OVERFLOW) - fpscr |= FPSCR_OX; - if (eflag & EFLAG_UNDERFLOW) - fpscr |= FPSCR_UX; - if (eflag & EFLAG_DIVZERO) - fpscr |= FPSCR_ZX; - if (eflag & EFLAG_INEXACT) - fpscr |= FPSCR_XX; - if (eflag & EFLAG_VXSNAN) - fpscr |= FPSCR_VXSNAN; - if (eflag & EFLAG_VXISI) - fpscr |= FPSCR_VXISI; - if (eflag & EFLAG_VXIDI) - fpscr |= FPSCR_VXIDI; - if (eflag & EFLAG_VXZDZ) - fpscr |= FPSCR_VXZDZ; - if (eflag & EFLAG_VXIMZ) - fpscr |= FPSCR_VXIMZ; - if (eflag & EFLAG_VXVC) - fpscr |= FPSCR_VXVC; - if (eflag & EFLAG_VXSOFT) - fpscr |= FPSCR_VXSOFT; - if (eflag & EFLAG_VXSQRT) - fpscr |= FPSCR_VXSQRT; - if (eflag & EFLAG_VXCVI) - fpscr |= FPSCR_VXCVI; - } - - fpscr &= ~(FPSCR_VX); - if (fpscr & (FPSCR_VXSNAN | FPSCR_VXISI | FPSCR_VXIDI | - FPSCR_VXZDZ | FPSCR_VXIMZ | FPSCR_VXVC | - FPSCR_VXSOFT | FPSCR_VXSQRT | FPSCR_VXCVI)) - fpscr |= FPSCR_VX; - - fpscr &= ~(FPSCR_FEX); - if (((fpscr & FPSCR_VX) && (fpscr & FPSCR_VE)) || - ((fpscr & FPSCR_OX) && (fpscr & FPSCR_OE)) || - ((fpscr & FPSCR_UX) && (fpscr & FPSCR_UE)) || - ((fpscr & FPSCR_ZX) && (fpscr & FPSCR_ZE)) || - ((fpscr & FPSCR_XX) && (fpscr & FPSCR_XE))) - fpscr |= FPSCR_FEX; - - __FPU_FPSCR = fpscr; - - return (fpscr & FPSCR_FEX) ? 1 : 0; -} -#endif /* CONFIG_MATH_EMULATION */ - -int -do_mathemu(struct pt_regs *regs) -{ - void *op0 = 0, *op1 = 0, *op2 = 0, *op3 = 0; - unsigned long pc = regs->nip; - signed short sdisp; - u32 insn = 0; - int idx = 0; -#ifdef CONFIG_MATH_EMULATION - int (*func)(void *, void *, void *, void *); - int type = 0; - int eflag, trap; -#endif - - if (get_user(insn, (u32 *)pc)) - return -EFAULT; - -#ifndef CONFIG_MATH_EMULATION - switch (insn >> 26) { - case LFD: - idx = (insn >> 16) & 0x1f; - sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); - lfd(op0, op1, op2, op3); - break; - case LFDU: - idx = (insn >> 16) & 0x1f; - sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); - lfd(op0, op1, op2, op3); - regs->gpr[idx] = (unsigned long)op1; - break; - case STFD: - idx = (insn >> 16) & 0x1f; - sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); - stfd(op0, op1, op2, op3); - break; - case STFDU: - idx = (insn >> 16) & 0x1f; - sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); - stfd(op0, op1, op2, op3); - regs->gpr[idx] = (unsigned long)op1; - break; - case OP63: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; - fmr(op0, op1, op2, op3); - break; - default: - goto illegal; - } -#else /* CONFIG_MATH_EMULATION */ - switch (insn >> 26) { - case LFS: func = lfs; type = D; break; - case LFSU: func = lfs; type = DU; break; - case LFD: func = lfd; type = D; break; - case LFDU: func = lfd; type = DU; break; - case STFS: func = stfs; type = D; break; - case STFSU: func = stfs; type = DU; break; - case STFD: func = stfd; type = D; break; - case STFDU: func = stfd; type = DU; break; - - case OP31: - switch ((insn >> 1) & 0x3ff) { - case LFSX: func = lfs; type = XE; break; - case LFSUX: func = lfs; type = XEU; break; - case LFDX: func = lfd; type = XE; break; - case LFDUX: func = lfd; type = XEU; break; - case STFSX: func = stfs; type = XE; break; - case STFSUX: func = stfs; type = XEU; break; - case STFDX: func = stfd; type = XE; break; - case STFDUX: func = stfd; type = XEU; break; - case STFIWX: func = stfiwx; type = XE; break; - default: - goto illegal; - } - break; - - case OP59: - switch ((insn >> 1) & 0x1f) { - case FDIVS: func = fdivs; type = AB; break; - case FSUBS: func = fsubs; type = AB; break; - case FADDS: func = fadds; type = AB; break; - case FSQRTS: func = fsqrts; type = AB; break; - case FRES: func = fres; type = AB; break; - case FMULS: func = fmuls; type = AC; break; - case FMSUBS: func = fmsubs; type = ABC; break; - case FMADDS: func = fmadds; type = ABC; break; - case FNMSUBS: func = fnmsubs; type = ABC; break; - case FNMADDS: func = fnmadds; type = ABC; break; - default: - goto illegal; - } - break; - - case OP63: - if (insn & 0x20) { - switch ((insn >> 1) & 0x1f) { - case FDIV: func = fdiv; type = AB; break; - case FSUB: func = fsub; type = AB; break; - case FADD: func = fadd; type = AB; break; - case FSQRT: func = fsqrt; type = AB; break; - case FSEL: func = fsel; type = ABC; break; - case FMUL: func = fmul; type = AC; break; - case FRSQRTE: func = frsqrte; type = AB; break; - case FMSUB: func = fmsub; type = ABC; break; - case FMADD: func = fmadd; type = ABC; break; - case FNMSUB: func = fnmsub; type = ABC; break; - case FNMADD: func = fnmadd; type = ABC; break; - default: - goto illegal; - } - break; - } - - switch ((insn >> 1) & 0x3ff) { - case FCMPU: func = fcmpu; type = XCR; break; - case FRSP: func = frsp; type = XB; break; - case FCTIW: func = fctiw; type = XB; break; - case FCTIWZ: func = fctiwz; type = XB; break; - case FCMPO: func = fcmpo; type = XCR; break; - case MTFSB1: func = mtfsb1; type = XCRB; break; - case FNEG: func = fneg; type = XB; break; - case MCRFS: func = mcrfs; type = XCRL; break; - case MTFSB0: func = mtfsb0; type = XCRB; break; - case FMR: func = fmr; type = XB; break; - case MTFSFI: func = mtfsfi; type = XCRI; break; - case FNABS: func = fnabs; type = XB; break; - case FABS: func = fabs; type = XB; break; - case MFFS: func = mffs; type = X; break; - case MTFSF: func = mtfsf; type = XFLB; break; - default: - goto illegal; - } - break; - - default: - goto illegal; - } - - switch (type) { - case AB: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; - op2 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; - break; - - case AC: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; - op2 = (void *)¤t->thread.fpr[(insn >> 6) & 0x1f]; - break; - - case ABC: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; - op2 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; - op3 = (void *)¤t->thread.fpr[(insn >> 6) & 0x1f]; - break; - - case D: - idx = (insn >> 16) & 0x1f; - sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); - break; - - case DU: - idx = (insn >> 16) & 0x1f; - if (!idx) - goto illegal; - - sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)(regs->gpr[idx] + sdisp); - break; - - case X: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - break; - - case XA: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; - break; - - case XB: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; - break; - - case XE: - idx = (insn >> 16) & 0x1f; - if (!idx) - goto illegal; - - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)(regs->gpr[idx] + regs->gpr[(insn >> 11) & 0x1f]); - break; - - case XEU: - idx = (insn >> 16) & 0x1f; - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)((idx ? regs->gpr[idx] : 0) - + regs->gpr[(insn >> 11) & 0x1f]); - break; - - case XCR: - op0 = (void *)®s->ccr; - op1 = (void *)((insn >> 23) & 0x7); - op2 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; - op3 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; - break; - - case XCRL: - op0 = (void *)®s->ccr; - op1 = (void *)((insn >> 23) & 0x7); - op2 = (void *)((insn >> 18) & 0x7); - break; - - case XCRB: - op0 = (void *)((insn >> 21) & 0x1f); - break; - - case XCRI: - op0 = (void *)((insn >> 23) & 0x7); - op1 = (void *)((insn >> 12) & 0xf); - break; - - case XFLB: - op0 = (void *)((insn >> 17) & 0xff); - op1 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; - break; - - default: - goto illegal; - } - - eflag = func(op0, op1, op2, op3); - - if (insn & 1) { - regs->ccr &= ~(0x0f000000); - regs->ccr |= (__FPU_FPSCR >> 4) & 0x0f000000; - } - - trap = record_exception(regs, eflag); - if (trap) - return 1; - - switch (type) { - case DU: - case XEU: - regs->gpr[idx] = (unsigned long)op1; - break; - - default: - break; - } -#endif /* CONFIG_MATH_EMULATION */ - - regs->nip += 4; - return 0; - -illegal: - return -ENOSYS; -} diff --git a/arch/ppc/math-emu/mcrfs.c b/arch/ppc/math-emu/mcrfs.c deleted file mode 100644 index 106dd912914..00000000000 --- a/arch/ppc/math-emu/mcrfs.c +++ /dev/null @@ -1,31 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" - -int -mcrfs(u32 *ccr, u32 crfD, u32 crfS) -{ - u32 value, clear; - -#ifdef DEBUG - printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS); -#endif - - clear = 15 << ((7 - crfS) << 2); - if (!crfS) - clear = 0x90000000; - - value = (__FPU_FPSCR >> ((7 - crfS) << 2)) & 15; - __FPU_FPSCR &= ~(clear); - - *ccr &= ~(15 << ((7 - crfD) << 2)); - *ccr |= (value << ((7 - crfD) << 2)); - -#ifdef DEBUG - printk("CR: %08x\n", __FUNCTION__, *ccr); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/mffs.c b/arch/ppc/math-emu/mffs.c deleted file mode 100644 index f477c9170e7..00000000000 --- a/arch/ppc/math-emu/mffs.c +++ /dev/null @@ -1,17 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" - -int -mffs(u32 *frD) -{ - frD[1] = __FPU_FPSCR; - -#ifdef DEBUG - printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/mtfsb0.c b/arch/ppc/math-emu/mtfsb0.c deleted file mode 100644 index 99bfd80f4af..00000000000 --- a/arch/ppc/math-emu/mtfsb0.c +++ /dev/null @@ -1,18 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" - -int -mtfsb0(int crbD) -{ - if ((crbD != 1) && (crbD != 2)) - __FPU_FPSCR &= ~(1 << (31 - crbD)); - -#ifdef DEBUG - printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/mtfsb1.c b/arch/ppc/math-emu/mtfsb1.c deleted file mode 100644 index 3d9e7ed92d2..00000000000 --- a/arch/ppc/math-emu/mtfsb1.c +++ /dev/null @@ -1,18 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" - -int -mtfsb1(int crbD) -{ - if ((crbD != 1) && (crbD != 2)) - __FPU_FPSCR |= (1 << (31 - crbD)); - -#ifdef DEBUG - printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/mtfsf.c b/arch/ppc/math-emu/mtfsf.c deleted file mode 100644 index d70cf714994..00000000000 --- a/arch/ppc/math-emu/mtfsf.c +++ /dev/null @@ -1,45 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" - -int -mtfsf(unsigned int FM, u32 *frB) -{ - u32 mask; - - if (FM == 0) - return 0; - - if (FM == 0xff) - mask = 0x9fffffff; - else { - mask = 0; - if (FM & (1 << 0)) - mask |= 0x90000000; - if (FM & (1 << 1)) - mask |= 0x0f000000; - if (FM & (1 << 2)) - mask |= 0x00f00000; - if (FM & (1 << 3)) - mask |= 0x000f0000; - if (FM & (1 << 4)) - mask |= 0x0000f000; - if (FM & (1 << 5)) - mask |= 0x00000f00; - if (FM & (1 << 6)) - mask |= 0x000000f0; - if (FM & (1 << 7)) - mask |= 0x0000000f; - } - - __FPU_FPSCR &= ~(mask); - __FPU_FPSCR |= (frB[1] & mask); - -#ifdef DEBUG - printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/mtfsfi.c b/arch/ppc/math-emu/mtfsfi.c deleted file mode 100644 index 71df854baa7..00000000000 --- a/arch/ppc/math-emu/mtfsfi.c +++ /dev/null @@ -1,23 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" - -int -mtfsfi(unsigned int crfD, unsigned int IMM) -{ - u32 mask = 0xf; - - if (!crfD) - mask = 9; - - __FPU_FPSCR &= ~(mask << ((7 - crfD) << 2)); - __FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2); - -#ifdef DEBUG - printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR); -#endif - - return 0; -} diff --git a/arch/ppc/math-emu/op-1.h b/arch/ppc/math-emu/op-1.h deleted file mode 100644 index c92fa95f562..00000000000 --- a/arch/ppc/math-emu/op-1.h +++ /dev/null @@ -1,245 +0,0 @@ -/* - * Basic one-word fraction declaration and manipulation. - */ - -#define _FP_FRAC_DECL_1(X) _FP_W_TYPE X##_f -#define _FP_FRAC_COPY_1(D,S) (D##_f = S##_f) -#define _FP_FRAC_SET_1(X,I) (X##_f = I) -#define _FP_FRAC_HIGH_1(X) (X##_f) -#define _FP_FRAC_LOW_1(X) (X##_f) -#define _FP_FRAC_WORD_1(X,w) (X##_f) - -#define _FP_FRAC_ADDI_1(X,I) (X##_f += I) -#define _FP_FRAC_SLL_1(X,N) \ - do { \ - if (__builtin_constant_p(N) && (N) == 1) \ - X##_f += X##_f; \ - else \ - X##_f <<= (N); \ - } while (0) -#define _FP_FRAC_SRL_1(X,N) (X##_f >>= N) - -/* Right shift with sticky-lsb. */ -#define _FP_FRAC_SRS_1(X,N,sz) __FP_FRAC_SRS_1(X##_f, N, sz) - -#define __FP_FRAC_SRS_1(X,N,sz) \ - (X = (X >> (N) | (__builtin_constant_p(N) && (N) == 1 \ - ? X & 1 : (X << (_FP_W_TYPE_SIZE - (N))) != 0))) - -#define _FP_FRAC_ADD_1(R,X,Y) (R##_f = X##_f + Y##_f) -#define _FP_FRAC_SUB_1(R,X,Y) (R##_f = X##_f - Y##_f) -#define _FP_FRAC_CLZ_1(z, X) __FP_CLZ(z, X##_f) - -/* Predicates */ -#define _FP_FRAC_NEGP_1(X) ((_FP_WS_TYPE)X##_f < 0) -#define _FP_FRAC_ZEROP_1(X) (X##_f == 0) -#define _FP_FRAC_OVERP_1(fs,X) (X##_f & _FP_OVERFLOW_##fs) -#define _FP_FRAC_EQ_1(X, Y) (X##_f == Y##_f) -#define _FP_FRAC_GE_1(X, Y) (X##_f >= Y##_f) -#define _FP_FRAC_GT_1(X, Y) (X##_f > Y##_f) - -#define _FP_ZEROFRAC_1 0 -#define _FP_MINFRAC_1 1 - -/* - * Unpack the raw bits of a native fp value. Do not classify or - * normalize the data. - */ - -#define _FP_UNPACK_RAW_1(fs, X, val) \ - do { \ - union _FP_UNION_##fs _flo; _flo.flt = (val); \ - \ - X##_f = _flo.bits.frac; \ - X##_e = _flo.bits.exp; \ - X##_s = _flo.bits.sign; \ - } while (0) - - -/* - * Repack the raw bits of a native fp value. - */ - -#define _FP_PACK_RAW_1(fs, val, X) \ - do { \ - union _FP_UNION_##fs _flo; \ - \ - _flo.bits.frac = X##_f; \ - _flo.bits.exp = X##_e; \ - _flo.bits.sign = X##_s; \ - \ - (val) = _flo.flt; \ - } while (0) - - -/* - * Multiplication algorithms: - */ - -/* Basic. Assuming the host word size is >= 2*FRACBITS, we can do the - multiplication immediately. */ - -#define _FP_MUL_MEAT_1_imm(fs, R, X, Y) \ - do { \ - R##_f = X##_f * Y##_f; \ - /* Normalize since we know where the msb of the multiplicands \ - were (bit B), we know that the msb of the of the product is \ - at either 2B or 2B-1. */ \ - _FP_FRAC_SRS_1(R, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs); \ - } while (0) - -/* Given a 1W * 1W => 2W primitive, do the extended multiplication. */ - -#define _FP_MUL_MEAT_1_wide(fs, R, X, Y, doit) \ - do { \ - _FP_W_TYPE _Z_f0, _Z_f1; \ - doit(_Z_f1, _Z_f0, X##_f, Y##_f); \ - /* Normalize since we know where the msb of the multiplicands \ - were (bit B), we know that the msb of the of the product is \ - at either 2B or 2B-1. */ \ - _FP_FRAC_SRS_2(_Z, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs); \ - R##_f = _Z_f0; \ - } while (0) - -/* Finally, a simple widening multiply algorithm. What fun! */ - -#define _FP_MUL_MEAT_1_hard(fs, R, X, Y) \ - do { \ - _FP_W_TYPE _xh, _xl, _yh, _yl, _z_f0, _z_f1, _a_f0, _a_f1; \ - \ - /* split the words in half */ \ - _xh = X##_f >> (_FP_W_TYPE_SIZE/2); \ - _xl = X##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1); \ - _yh = Y##_f >> (_FP_W_TYPE_SIZE/2); \ - _yl = Y##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1); \ - \ - /* multiply the pieces */ \ - _z_f0 = _xl * _yl; \ - _a_f0 = _xh * _yl; \ - _a_f1 = _xl * _yh; \ - _z_f1 = _xh * _yh; \ - \ - /* reassemble into two full words */ \ - if ((_a_f0 += _a_f1) < _a_f1) \ - _z_f1 += (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2); \ - _a_f1 = _a_f0 >> (_FP_W_TYPE_SIZE/2); \ - _a_f0 = _a_f0 << (_FP_W_TYPE_SIZE/2); \ - _FP_FRAC_ADD_2(_z, _z, _a); \ - \ - /* normalize */ \ - _FP_FRAC_SRS_2(_z, _FP_WFRACBITS_##fs - 1, 2*_FP_WFRACBITS_##fs); \ - R##_f = _z_f0; \ - } while (0) - - -/* - * Division algorithms: - */ - -/* Basic. Assuming the host word size is >= 2*FRACBITS, we can do the - division immediately. Give this macro either _FP_DIV_HELP_imm for - C primitives or _FP_DIV_HELP_ldiv for the ISO function. Which you - choose will depend on what the compiler does with divrem4. */ - -#define _FP_DIV_MEAT_1_imm(fs, R, X, Y, doit) \ - do { \ - _FP_W_TYPE _q, _r; \ - X##_f <<= (X##_f < Y##_f \ - ? R##_e--, _FP_WFRACBITS_##fs \ - : _FP_WFRACBITS_##fs - 1); \ - doit(_q, _r, X##_f, Y##_f); \ - R##_f = _q | (_r != 0); \ - } while (0) - -/* GCC's longlong.h defines a 2W / 1W => (1W,1W) primitive udiv_qrnnd - that may be useful in this situation. This first is for a primitive - that requires normalization, the second for one that does not. Look - for UDIV_NEEDS_NORMALIZATION to tell which your machine needs. */ - -#define _FP_DIV_MEAT_1_udiv_norm(fs, R, X, Y) \ - do { \ - _FP_W_TYPE _nh, _nl, _q, _r; \ - \ - /* Normalize Y -- i.e. make the most significant bit set. */ \ - Y##_f <<= _FP_WFRACXBITS_##fs - 1; \ - \ - /* Shift X op correspondingly high, that is, up one full word. */ \ - if (X##_f <= Y##_f) \ - { \ - _nl = 0; \ - _nh = X##_f; \ - } \ - else \ - { \ - R##_e++; \ - _nl = X##_f << (_FP_W_TYPE_SIZE-1); \ - _nh = X##_f >> 1; \ - } \ - \ - udiv_qrnnd(_q, _r, _nh, _nl, Y##_f); \ - R##_f = _q | (_r != 0); \ - } while (0) - -#define _FP_DIV_MEAT_1_udiv(fs, R, X, Y) \ - do { \ - _FP_W_TYPE _nh, _nl, _q, _r; \ - if (X##_f < Y##_f) \ - { \ - R##_e--; \ - _nl = X##_f << _FP_WFRACBITS_##fs; \ - _nh = X##_f >> _FP_WFRACXBITS_##fs; \ - } \ - else \ - { \ - _nl = X##_f << (_FP_WFRACBITS_##fs - 1); \ - _nh = X##_f >> (_FP_WFRACXBITS_##fs + 1); \ - } \ - udiv_qrnnd(_q, _r, _nh, _nl, Y##_f); \ - R##_f = _q | (_r != 0); \ - } while (0) - - -/* - * Square root algorithms: - * We have just one right now, maybe Newton approximation - * should be added for those machines where division is fast. - */ - -#define _FP_SQRT_MEAT_1(R, S, T, X, q) \ - do { \ - while (q) \ - { \ - T##_f = S##_f + q; \ - if (T##_f <= X##_f) \ - { \ - S##_f = T##_f + q; \ - X##_f -= T##_f; \ - R##_f += q; \ - } \ - _FP_FRAC_SLL_1(X, 1); \ - q >>= 1; \ - } \ - } while (0) - -/* - * Assembly/disassembly for converting to/from integral types. - * No shifting or overflow handled here. - */ - -#define _FP_FRAC_ASSEMBLE_1(r, X, rsize) (r = X##_f) -#define _FP_FRAC_DISASSEMBLE_1(X, r, rsize) (X##_f = r) - - -/* - * Convert FP values between word sizes - */ - -#define _FP_FRAC_CONV_1_1(dfs, sfs, D, S) \ - do { \ - D##_f = S##_f; \ - if (_FP_WFRACBITS_##sfs > _FP_WFRACBITS_##dfs) \ - _FP_FRAC_SRS_1(D, (_FP_WFRACBITS_##sfs-_FP_WFRACBITS_##dfs), \ - _FP_WFRACBITS_##sfs); \ - else \ - D##_f <<= _FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs; \ - } while (0) diff --git a/arch/ppc/math-emu/op-2.h b/arch/ppc/math-emu/op-2.h deleted file mode 100644 index b9b06b4c6ea..00000000000 --- a/arch/ppc/math-emu/op-2.h +++ /dev/null @@ -1,433 +0,0 @@ -/* - * Basic two-word fraction declaration and manipulation. - */ - -#define _FP_FRAC_DECL_2(X) _FP_W_TYPE X##_f0, X##_f1 -#define _FP_FRAC_COPY_2(D,S) (D##_f0 = S##_f0, D##_f1 = S##_f1) -#define _FP_FRAC_SET_2(X,I) __FP_FRAC_SET_2(X, I) -#define _FP_FRAC_HIGH_2(X) (X##_f1) -#define _FP_FRAC_LOW_2(X) (X##_f0) -#define _FP_FRAC_WORD_2(X,w) (X##_f##w) - -#define _FP_FRAC_SLL_2(X,N) \ - do { \ - if ((N) < _FP_W_TYPE_SIZE) \ - { \ - if (__builtin_constant_p(N) && (N) == 1) \ - { \ - X##_f1 = X##_f1 + X##_f1 + (((_FP_WS_TYPE)(X##_f0)) < 0); \ - X##_f0 += X##_f0; \ - } \ - else \ - { \ - X##_f1 = X##_f1 << (N) | X##_f0 >> (_FP_W_TYPE_SIZE - (N)); \ - X##_f0 <<= (N); \ - } \ - } \ - else \ - { \ - X##_f1 = X##_f0 << ((N) - _FP_W_TYPE_SIZE); \ - X##_f0 = 0; \ - } \ - } while (0) - -#define _FP_FRAC_SRL_2(X,N) \ - do { \ - if ((N) < _FP_W_TYPE_SIZE) \ - { \ - X##_f0 = X##_f0 >> (N) | X##_f1 << (_FP_W_TYPE_SIZE - (N)); \ - X##_f1 >>= (N); \ - } \ - else \ - { \ - X##_f0 = X##_f1 >> ((N) - _FP_W_TYPE_SIZE); \ - X##_f1 = 0; \ - } \ - } while (0) - -/* Right shift with sticky-lsb. */ -#define _FP_FRAC_SRS_2(X,N,sz) \ - do { \ - if ((N) < _FP_W_TYPE_SIZE) \ - { \ - X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) | \ - (__builtin_constant_p(N) && (N) == 1 \ - ? X##_f0 & 1 \ - : (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0)); \ - X##_f1 >>= (N); \ - } \ - else \ - { \ - X##_f0 = (X##_f1 >> ((N) - _FP_W_TYPE_SIZE) | \ - (((X##_f1 << (sz - (N))) | X##_f0) != 0)); \ - X##_f1 = 0; \ - } \ - } while (0) - -#define _FP_FRAC_ADDI_2(X,I) \ - __FP_FRAC_ADDI_2(X##_f1, X##_f0, I) - -#define _FP_FRAC_ADD_2(R,X,Y) \ - __FP_FRAC_ADD_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0) - -#define _FP_FRAC_SUB_2(R,X,Y) \ - __FP_FRAC_SUB_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0) - -#define _FP_FRAC_CLZ_2(R,X) \ - do { \ - if (X##_f1) \ - __FP_CLZ(R,X##_f1); \ - else \ - { \ - __FP_CLZ(R,X##_f0); \ - R += _FP_W_TYPE_SIZE; \ - } \ - } while(0) - -/* Predicates */ -#define _FP_FRAC_NEGP_2(X) ((_FP_WS_TYPE)X##_f1 < 0) -#define _FP_FRAC_ZEROP_2(X) ((X##_f1 | X##_f0) == 0) -#define _FP_FRAC_OVERP_2(fs,X) (X##_f1 & _FP_OVERFLOW_##fs) -#define _FP_FRAC_EQ_2(X, Y) (X##_f1 == Y##_f1 && X##_f0 == Y##_f0) -#define _FP_FRAC_GT_2(X, Y) \ - ((X##_f1 > Y##_f1) || (X##_f1 == Y##_f1 && X##_f0 > Y##_f0)) -#define _FP_FRAC_GE_2(X, Y) \ - ((X##_f1 > Y##_f1) || (X##_f1 == Y##_f1 && X##_f0 >= Y##_f0)) - -#define _FP_ZEROFRAC_2 0, 0 -#define _FP_MINFRAC_2 0, 1 - -/* - * Internals - */ - -#define __FP_FRAC_SET_2(X,I1,I0) (X##_f0 = I0, X##_f1 = I1) - -#define __FP_CLZ_2(R, xh, xl) \ - do { \ - if (xh) \ - __FP_CLZ(R,xl); \ - else \ - { \ - __FP_CLZ(R,xl); \ - R += _FP_W_TYPE_SIZE; \ - } \ - } while(0) - -#if 0 - -#ifndef __FP_FRAC_ADDI_2 -#define __FP_FRAC_ADDI_2(xh, xl, i) \ - (xh += ((xl += i) < i)) -#endif -#ifndef __FP_FRAC_ADD_2 -#define __FP_FRAC_ADD_2(rh, rl, xh, xl, yh, yl) \ - (rh = xh + yh + ((rl = xl + yl) < xl)) -#endif -#ifndef __FP_FRAC_SUB_2 -#define __FP_FRAC_SUB_2(rh, rl, xh, xl, yh, yl) \ - (rh = xh - yh - ((rl = xl - yl) > xl)) -#endif - -#else - -#undef __FP_FRAC_ADDI_2 -#define __FP_FRAC_ADDI_2(xh, xl, i) add_ssaaaa(xh, xl, xh, xl, 0, i) -#undef __FP_FRAC_ADD_2 -#define __FP_FRAC_ADD_2 add_ssaaaa -#undef __FP_FRAC_SUB_2 -#define __FP_FRAC_SUB_2 sub_ddmmss - -#endif - -/* - * Unpack the raw bits of a native fp value. Do not classify or - * normalize the data. - */ - -#define _FP_UNPACK_RAW_2(fs, X, val) \ - do { \ - union _FP_UNION_##fs _flo; _flo.flt = (val); \ - \ - X##_f0 = _flo.bits.frac0; \ - X##_f1 = _flo.bits.frac1; \ - X##_e = _flo.bits.exp; \ - X##_s = _flo.bits.sign; \ - } while (0) - - -/* - * Repack the raw bits of a native fp value. - */ - -#define _FP_PACK_RAW_2(fs, val, X) \ - do { \ - union _FP_UNION_##fs _flo; \ - \ - _flo.bits.frac0 = X##_f0; \ - _flo.bits.frac1 = X##_f1; \ - _flo.bits.exp = X##_e; \ - _flo.bits.sign = X##_s; \ - \ - (val) = _flo.flt; \ - } while (0) - - -/* - * Multiplication algorithms: - */ - -/* Given a 1W * 1W => 2W primitive, do the extended multiplication. */ - -#define _FP_MUL_MEAT_2_wide(fs, R, X, Y, doit) \ - do { \ - _FP_FRAC_DECL_4(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c); \ - \ - doit(_FP_FRAC_WORD_4(_z,1), _FP_FRAC_WORD_4(_z,0), X##_f0, Y##_f0); \ - doit(_b_f1, _b_f0, X##_f0, Y##_f1); \ - doit(_c_f1, _c_f0, X##_f1, Y##_f0); \ - doit(_FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2), X##_f1, Y##_f1); \ - \ - __FP_FRAC_ADD_4(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2), \ - _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0), \ - 0, _b_f1, _b_f0, 0, \ - _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2), \ - _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0)); \ - __FP_FRAC_ADD_4(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2), \ - _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0), \ - 0, _c_f1, _c_f0, 0, \ - _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2), \ - _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0)); \ - \ - /* Normalize since we know where the msb of the multiplicands \ - were (bit B), we know that the msb of the of the product is \ - at either 2B or 2B-1. */ \ - _FP_FRAC_SRS_4(_z, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs); \ - R##_f0 = _FP_FRAC_WORD_4(_z,0); \ - R##_f1 = _FP_FRAC_WORD_4(_z,1); \ - } while (0) - -/* This next macro appears to be totally broken. Fortunately nowhere - * seems to use it :-> The problem is that we define _z[4] but - * then use it in _FP_FRAC_SRS_4, which will attempt to access - * _z_f[n] which will cause an error. The fix probably involves - * declaring it with _FP_FRAC_DECL_4, see previous macro. -- PMM 02/1998 - */ -#define _FP_MUL_MEAT_2_gmp(fs, R, X, Y) \ - do { \ - _FP_W_TYPE _x[2], _y[2], _z[4]; \ - _x[0] = X##_f0; _x[1] = X##_f1; \ - _y[0] = Y##_f0; _y[1] = Y##_f1; \ - \ - mpn_mul_n(_z, _x, _y, 2); \ - \ - /* Normalize since we know where the msb of the multiplicands \ - were (bit B), we know that the msb of the of the product is \ - at either 2B or 2B-1. */ \ - _FP_FRAC_SRS_4(_z, _FP_WFRACBITS##_fs-1, 2*_FP_WFRACBITS_##fs); \ - R##_f0 = _z[0]; \ - R##_f1 = _z[1]; \ - } while (0) - - -/* - * Division algorithms: - * This seems to be giving me difficulties -- PMM - * Look, NetBSD seems to be able to comment algorithms. Can't you? - * I've thrown printks at the problem. - * This now appears to work, but I still don't really know why. - * Also, I don't think the result is properly normalised... - */ - -#define _FP_DIV_MEAT_2_udiv_64(fs, R, X, Y) \ - do { \ - extern void _fp_udivmodti4(_FP_W_TYPE q[2], _FP_W_TYPE r[2], \ - _FP_W_TYPE n1, _FP_W_TYPE n0, \ - _FP_W_TYPE d1, _FP_W_TYPE d0); \ - _FP_W_TYPE _n_f3, _n_f2, _n_f1, _n_f0, _r_f1, _r_f0; \ - _FP_W_TYPE _q_f1, _q_f0, _m_f1, _m_f0; \ - _FP_W_TYPE _rmem[2], _qmem[2]; \ - /* I think this check is to ensure that the result is normalised. \ - * Assuming X,Y normalised (ie in [1.0,2.0)) X/Y will be in \ - * [0.5,2.0). Furthermore, it will be less than 1.0 iff X < Y. \ - * In this case we tweak things. (this is based on comments in \ - * the NetBSD FPU emulation code. ) \ - * We know X,Y are normalised because we ensure this as part of \ - * the unpacking process. -- PMM \ - */ \ - if (_FP_FRAC_GT_2(X, Y)) \ - { \ -/* R##_e++; */ \ - _n_f3 = X##_f1 >> 1; \ - _n_f2 = X##_f1 << (_FP_W_TYPE_SIZE - 1) | X##_f0 >> 1; \ - _n_f1 = X##_f0 << (_FP_W_TYPE_SIZE - 1); \ - _n_f0 = 0; \ - } \ - else \ - { \ - R##_e--; \ - _n_f3 = X##_f1; \ - _n_f2 = X##_f0; \ - _n_f1 = _n_f0 = 0; \ - } \ - \ - /* Normalize, i.e. make the most significant bit of the \ - denominator set. CHANGED: - 1 to nothing -- PMM */ \ - _FP_FRAC_SLL_2(Y, _FP_WFRACXBITS_##fs /* -1 */); \ - \ - /* Do the 256/128 bit division given the 128-bit _fp_udivmodtf4 \ - primitive snagged from libgcc2.c. */ \ - \ - _fp_udivmodti4(_qmem, _rmem, _n_f3, _n_f2, 0, Y##_f1); \ - _q_f1 = _qmem[0]; \ - umul_ppmm(_m_f1, _m_f0, _q_f1, Y##_f0); \ - _r_f1 = _rmem[0]; \ - _r_f0 = _n_f1; \ - if (_FP_FRAC_GT_2(_m, _r)) \ - { \ - _q_f1--; \ - _FP_FRAC_ADD_2(_r, _r, Y); \ - if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r)) \ - { \ - _q_f1--; \ - _FP_FRAC_ADD_2(_r, _r, Y); \ - } \ - } \ - _FP_FRAC_SUB_2(_r, _r, _m); \ - \ - _fp_udivmodti4(_qmem, _rmem, _r_f1, _r_f0, 0, Y##_f1); \ - _q_f0 = _qmem[0]; \ - umul_ppmm(_m_f1, _m_f0, _q_f0, Y##_f0); \ - _r_f1 = _rmem[0]; \ - _r_f0 = _n_f0; \ - if (_FP_FRAC_GT_2(_m, _r)) \ - { \ - _q_f0--; \ - _FP_FRAC_ADD_2(_r, _r, Y); \ - if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r)) \ - { \ - _q_f0--; \ - _FP_FRAC_ADD_2(_r, _r, Y); \ - } \ - } \ - _FP_FRAC_SUB_2(_r, _r, _m); \ - \ - R##_f1 = _q_f1; \ - R##_f0 = _q_f0 | ((_r_f1 | _r_f0) != 0); \ - /* adjust so answer is normalized again. I'm not sure what the \ - * final sz param should be. In practice it's never used since \ - * N is 1 which is always going to be < _FP_W_TYPE_SIZE... \ - */ \ - /* _FP_FRAC_SRS_2(R,1,_FP_WFRACBITS_##fs); */ \ - } while (0) - - -#define _FP_DIV_MEAT_2_gmp(fs, R, X, Y) \ - do { \ - _FP_W_TYPE _x[4], _y[2], _z[4]; \ - _y[0] = Y##_f0; _y[1] = Y##_f1; \ - _x[0] = _x[3] = 0; \ - if (_FP_FRAC_GT_2(X, Y)) \ - { \ - R##_e++; \ - _x[1] = (X##_f0 << (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE) | \ - X##_f1 >> (_FP_W_TYPE_SIZE - \ - (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE))); \ - _x[2] = X##_f1 << (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE); \ - } \ - else \ - { \ - _x[1] = (X##_f0 << (_FP_WFRACBITS - _FP_W_TYPE_SIZE) | \ - X##_f1 >> (_FP_W_TYPE_SIZE - \ - (_FP_WFRACBITS - _FP_W_TYPE_SIZE))); \ - _x[2] = X##_f1 << (_FP_WFRACBITS - _FP_W_TYPE_SIZE); \ - } \ - \ - (void) mpn_divrem (_z, 0, _x, 4, _y, 2); \ - R##_f1 = _z[1]; \ - R##_f0 = _z[0] | ((_x[0] | _x[1]) != 0); \ - } while (0) - - -/* - * Square root algorithms: - * We have just one right now, maybe Newton approximation - * should be added for those machines where division is fast. - */ - -#define _FP_SQRT_MEAT_2(R, S, T, X, q) \ - do { \ - while (q) \ - { \ - T##_f1 = S##_f1 + q; \ - if (T##_f1 <= X##_f1) \ - { \ - S##_f1 = T##_f1 + q; \ - X##_f1 -= T##_f1; \ - R##_f1 += q; \ - } \ - _FP_FRAC_SLL_2(X, 1); \ - q >>= 1; \ - } \ - q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1); \ - while (q) \ - { \ - T##_f0 = S##_f0 + q; \ - T##_f1 = S##_f1; \ - if (T##_f1 < X##_f1 || \ - (T##_f1 == X##_f1 && T##_f0 < X##_f0)) \ - { \ - S##_f0 = T##_f0 + q; \ - if (((_FP_WS_TYPE)T##_f0) < 0 && \ - ((_FP_WS_TYPE)S##_f0) >= 0) \ - S##_f1++; \ - _FP_FRAC_SUB_2(X, X, T); \ - R##_f0 += q; \ - } \ - _FP_FRAC_SLL_2(X, 1); \ - q >>= 1; \ - } \ - } while (0) - - -/* - * Assembly/disassembly for converting to/from integral types. - * No shifting or overflow handled here. - */ - -#define _FP_FRAC_ASSEMBLE_2(r, X, rsize) \ - do { \ - if (rsize <= _FP_W_TYPE_SIZE) \ - r = X##_f0; \ - else \ - { \ - r = X##_f1; \ - r <<= _FP_W_TYPE_SIZE; \ - r += X##_f0; \ - } \ - } while (0) - -#define _FP_FRAC_DISASSEMBLE_2(X, r, rsize) \ - do { \ - X##_f0 = r; \ - X##_f1 = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE); \ - } while (0) - -/* - * Convert FP values between word sizes - */ - -#define _FP_FRAC_CONV_1_2(dfs, sfs, D, S) \ - do { \ - _FP_FRAC_SRS_2(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs), \ - _FP_WFRACBITS_##sfs); \ - D##_f = S##_f0; \ - } while (0) - -#define _FP_FRAC_CONV_2_1(dfs, sfs, D, S) \ - do { \ - D##_f0 = S##_f; \ - D##_f1 = 0; \ - _FP_FRAC_SLL_2(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs)); \ - } while (0) - diff --git a/arch/ppc/math-emu/op-4.h b/arch/ppc/math-emu/op-4.h deleted file mode 100644 index fcdd6d064c5..00000000000 --- a/arch/ppc/math-emu/op-4.h +++ /dev/null @@ -1,297 +0,0 @@ -/* - * Basic four-word fraction declaration and manipulation. - * - * When adding quadword support for 32 bit machines, we need - * to be a little careful as double multiply uses some of these - * macros: (in op-2.h) - * _FP_MUL_MEAT_2_wide() uses _FP_FRAC_DECL_4, _FP_FRAC_WORD_4, - * _FP_FRAC_ADD_4, _FP_FRAC_SRS_4 - * _FP_MUL_MEAT_2_gmp() uses _FP_FRAC_SRS_4 (and should use - * _FP_FRAC_DECL_4: it appears to be broken and is not used - * anywhere anyway. ) - * - * I've now fixed all the macros that were here from the sparc64 code. - * [*none* of the shift macros were correct!] -- PMM 02/1998 - * - * The only quadword stuff that remains to be coded is: - * 1) the conversion to/from ints, which requires - * that we check (in op-common.h) that the following do the right thing - * for quadwords: _FP_TO_INT(Q,4,r,X,rsz,rsg), _FP_FROM_INT(Q,4,X,r,rs,rt) - * 2) multiply, divide and sqrt, which require: - * _FP_MUL_MEAT_4_*(R,X,Y), _FP_DIV_MEAT_4_*(R,X,Y), _FP_SQRT_MEAT_4(R,S,T,X,q), - * This also needs _FP_MUL_MEAT_Q and _FP_DIV_MEAT_Q to be defined to - * some suitable _FP_MUL_MEAT_4_* macros in sfp-machine.h. - * [we're free to choose whatever FP_MUL_MEAT_4_* macros we need for - * these; they are used nowhere else. ] - */ - -#define _FP_FRAC_DECL_4(X) _FP_W_TYPE X##_f[4] -#define _FP_FRAC_COPY_4(D,S) \ - (D##_f[0] = S##_f[0], D##_f[1] = S##_f[1], \ - D##_f[2] = S##_f[2], D##_f[3] = S##_f[3]) -/* The _FP_FRAC_SET_n(X,I) macro is intended for use with another - * macro such as _FP_ZEROFRAC_n which returns n comma separated values. - * The result is that we get an expansion of __FP_FRAC_SET_n(X,I0,I1,I2,I3) - * which just assigns the In values to the array X##_f[]. - * This is why the number of parameters doesn't appear to match - * at first glance... -- PMM - */ -#define _FP_FRAC_SET_4(X,I) __FP_FRAC_SET_4(X, I) -#define _FP_FRAC_HIGH_4(X) (X##_f[3]) -#define _FP_FRAC_LOW_4(X) (X##_f[0]) -#define _FP_FRAC_WORD_4(X,w) (X##_f[w]) - -#define _FP_FRAC_SLL_4(X,N) \ - do { \ - _FP_I_TYPE _up, _down, _skip, _i; \ - _skip = (N) / _FP_W_TYPE_SIZE; \ - _up = (N) % _FP_W_TYPE_SIZE; \ - _down = _FP_W_TYPE_SIZE - _up; \ - for (_i = 3; _i > _skip; --_i) \ - X##_f[_i] = X##_f[_i-_skip] << _up | X##_f[_i-_skip-1] >> _down; \ -/* bugfixed: was X##_f[_i] <<= _up; -- PMM 02/1998 */ \ - X##_f[_i] = X##_f[0] << _up; \ - for (--_i; _i >= 0; --_i) \ - X##_f[_i] = 0; \ - } while (0) - -/* This one was broken too */ -#define _FP_FRAC_SRL_4(X,N) \ - do { \ - _FP_I_TYPE _up, _down, _skip, _i; \ - _skip = (N) / _FP_W_TYPE_SIZE; \ - _down = (N) % _FP_W_TYPE_SIZE; \ - _up = _FP_W_TYPE_SIZE - _down; \ - for (_i = 0; _i < 3-_skip; ++_i) \ - X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up; \ - X##_f[_i] = X##_f[3] >> _down; \ - for (++_i; _i < 4; ++_i) \ - X##_f[_i] = 0; \ - } while (0) - - -/* Right shift with sticky-lsb. - * What this actually means is that we do a standard right-shift, - * but that if any of the bits that fall off the right hand side - * were one then we always set the LSbit. - */ -#define _FP_FRAC_SRS_4(X,N,size) \ - do { \ - _FP_I_TYPE _up, _down, _skip, _i; \ - _FP_W_TYPE _s; \ - _skip = (N) / _FP_W_TYPE_SIZE; \ - _down = (N) % _FP_W_TYPE_SIZE; \ - _up = _FP_W_TYPE_SIZE - _down; \ - for (_s = _i = 0; _i < _skip; ++_i) \ - _s |= X##_f[_i]; \ - _s |= X##_f[_i] << _up; \ -/* s is now != 0 if we want to set the LSbit */ \ - for (_i = 0; _i < 3-_skip; ++_i) \ - X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up; \ - X##_f[_i] = X##_f[3] >> _down; \ - for (++_i; _i < 4; ++_i) \ - X##_f[_i] = 0; \ - /* don't fix the LSB until the very end when we're sure f[0] is stable */ \ - X##_f[0] |= (_s != 0); \ - } while (0) - -#define _FP_FRAC_ADD_4(R,X,Y) \ - __FP_FRAC_ADD_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0], \ - X##_f[3], X##_f[2], X##_f[1], X##_f[0], \ - Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0]) - -#define _FP_FRAC_SUB_4(R,X,Y) \ - __FP_FRAC_SUB_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0], \ - X##_f[3], X##_f[2], X##_f[1], X##_f[0], \ - Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0]) - -#define _FP_FRAC_ADDI_4(X,I) \ - __FP_FRAC_ADDI_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0], I) - -#define _FP_ZEROFRAC_4 0,0,0,0 -#define _FP_MINFRAC_4 0,0,0,1 - -#define _FP_FRAC_ZEROP_4(X) ((X##_f[0] | X##_f[1] | X##_f[2] | X##_f[3]) == 0) -#define _FP_FRAC_NEGP_4(X) ((_FP_WS_TYPE)X##_f[3] < 0) -#define _FP_FRAC_OVERP_4(fs,X) (X##_f[0] & _FP_OVERFLOW_##fs) - -#define _FP_FRAC_EQ_4(X,Y) \ - (X##_f[0] == Y##_f[0] && X##_f[1] == Y##_f[1] \ - && X##_f[2] == Y##_f[2] && X##_f[3] == Y##_f[3]) - -#define _FP_FRAC_GT_4(X,Y) \ - (X##_f[3] > Y##_f[3] || \ - (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] || \ - (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] || \ - (X##_f[1] == Y##_f[1] && X##_f[0] > Y##_f[0]) \ - )) \ - )) \ - ) - -#define _FP_FRAC_GE_4(X,Y) \ - (X##_f[3] > Y##_f[3] || \ - (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] || \ - (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] || \ - (X##_f[1] == Y##_f[1] && X##_f[0] >= Y##_f[0]) \ - )) \ - )) \ - ) - - -#define _FP_FRAC_CLZ_4(R,X) \ - do { \ - if (X##_f[3]) \ - { \ - __FP_CLZ(R,X##_f[3]); \ - } \ - else if (X##_f[2]) \ - { \ - __FP_CLZ(R,X##_f[2]); \ - R += _FP_W_TYPE_SIZE; \ - } \ - else if (X##_f[1]) \ - { \ - __FP_CLZ(R,X##_f[2]); \ - R += _FP_W_TYPE_SIZE*2; \ - } \ - else \ - { \ - __FP_CLZ(R,X##_f[0]); \ - R += _FP_W_TYPE_SIZE*3; \ - } \ - } while(0) - - -#define _FP_UNPACK_RAW_4(fs, X, val) \ - do { \ - union _FP_UNION_##fs _flo; _flo.flt = (val); \ - X##_f[0] = _flo.bits.frac0; \ - X##_f[1] = _flo.bits.frac1; \ - X##_f[2] = _flo.bits.frac2; \ - X##_f[3] = _flo.bits.frac3; \ - X##_e = _flo.bits.exp; \ - X##_s = _flo.bits.sign; \ - } while (0) - -#define _FP_PACK_RAW_4(fs, val, X) \ - do { \ - union _FP_UNION_##fs _flo; \ - _flo.bits.frac0 = X##_f[0]; \ - _flo.bits.frac1 = X##_f[1]; \ - _flo.bits.frac2 = X##_f[2]; \ - _flo.bits.frac3 = X##_f[3]; \ - _flo.bits.exp = X##_e; \ - _flo.bits.sign = X##_s; \ - (val) = _flo.flt; \ - } while (0) - - -/* - * Internals - */ - -#define __FP_FRAC_SET_4(X,I3,I2,I1,I0) \ - (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0) - -#ifndef __FP_FRAC_ADD_4 -#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ - (r0 = x0 + y0, \ - r1 = x1 + y1 + (r0 < x0), \ - r2 = x2 + y2 + (r1 < x1), \ - r3 = x3 + y3 + (r2 < x2)) -#endif - -#ifndef __FP_FRAC_SUB_4 -#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ - (r0 = x0 - y0, \ - r1 = x1 - y1 - (r0 > x0), \ - r2 = x2 - y2 - (r1 > x1), \ - r3 = x3 - y3 - (r2 > x2)) -#endif - -#ifndef __FP_FRAC_ADDI_4 -/* I always wanted to be a lisp programmer :-> */ -#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i) \ - (x3 += ((x2 += ((x1 += ((x0 += i) < x0)) < x1) < x2))) -#endif - -/* Convert FP values between word sizes. This appears to be more - * complicated than I'd have expected it to be, so these might be - * wrong... These macros are in any case somewhat bogus because they - * use information about what various FRAC_n variables look like - * internally [eg, that 2 word vars are X_f0 and x_f1]. But so do - * the ones in op-2.h and op-1.h. - */ -#define _FP_FRAC_CONV_1_4(dfs, sfs, D, S) \ - do { \ - _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs), \ - _FP_WFRACBITS_##sfs); \ - D##_f = S##_f[0]; \ - } while (0) - -#define _FP_FRAC_CONV_2_4(dfs, sfs, D, S) \ - do { \ - _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs), \ - _FP_WFRACBITS_##sfs); \ - D##_f0 = S##_f[0]; \ - D##_f1 = S##_f[1]; \ - } while (0) - -/* Assembly/disassembly for converting to/from integral types. - * No shifting or overflow handled here. - */ -/* Put the FP value X into r, which is an integer of size rsize. */ -#define _FP_FRAC_ASSEMBLE_4(r, X, rsize) \ - do { \ - if (rsize <= _FP_W_TYPE_SIZE) \ - r = X##_f[0]; \ - else if (rsize <= 2*_FP_W_TYPE_SIZE) \ - { \ - r = X##_f[1]; \ - r <<= _FP_W_TYPE_SIZE; \ - r += X##_f[0]; \ - } \ - else \ - { \ - /* I'm feeling lazy so we deal with int == 3words (implausible)*/ \ - /* and int == 4words as a single case. */ \ - r = X##_f[3]; \ - r <<= _FP_W_TYPE_SIZE; \ - r += X##_f[2]; \ - r <<= _FP_W_TYPE_SIZE; \ - r += X##_f[1]; \ - r <<= _FP_W_TYPE_SIZE; \ - r += X##_f[0]; \ - } \ - } while (0) - -/* "No disassemble Number Five!" */ -/* move an integer of size rsize into X's fractional part. We rely on - * the _f[] array consisting of words of size _FP_W_TYPE_SIZE to avoid - * having to mask the values we store into it. - */ -#define _FP_FRAC_DISASSEMBLE_4(X, r, rsize) \ - do { \ - X##_f[0] = r; \ - X##_f[1] = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE); \ - X##_f[2] = (rsize <= 2*_FP_W_TYPE_SIZE ? 0 : r >> 2*_FP_W_TYPE_SIZE); \ - X##_f[3] = (rsize <= 3*_FP_W_TYPE_SIZE ? 0 : r >> 3*_FP_W_TYPE_SIZE); \ - } while (0) - -#define _FP_FRAC_CONV_4_1(dfs, sfs, D, S) \ - do { \ - D##_f[0] = S##_f; \ - D##_f[1] = D##_f[2] = D##_f[3] = 0; \ - _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs)); \ - } while (0) - -#define _FP_FRAC_CONV_4_2(dfs, sfs, D, S) \ - do { \ - D##_f[0] = S##_f0; \ - D##_f[1] = S##_f1; \ - D##_f[2] = D##_f[3] = 0; \ - _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs)); \ - } while (0) - -/* FIXME! This has to be written */ -#define _FP_SQRT_MEAT_4(R, S, T, X, q) diff --git a/arch/ppc/math-emu/op-common.h b/arch/ppc/math-emu/op-common.h deleted file mode 100644 index afb82b6498c..00000000000 --- a/arch/ppc/math-emu/op-common.h +++ /dev/null @@ -1,688 +0,0 @@ -#define _FP_DECL(wc, X) \ - _FP_I_TYPE X##_c, X##_s, X##_e; \ - _FP_FRAC_DECL_##wc(X) - -/* - * Finish truely unpacking a native fp value by classifying the kind - * of fp value and normalizing both the exponent and the fraction. - */ - -#define _FP_UNPACK_CANONICAL(fs, wc, X) \ -do { \ - switch (X##_e) \ - { \ - default: \ - _FP_FRAC_HIGH_##wc(X) |= _FP_IMPLBIT_##fs; \ - _FP_FRAC_SLL_##wc(X, _FP_WORKBITS); \ - X##_e -= _FP_EXPBIAS_##fs; \ - X##_c = FP_CLS_NORMAL; \ - break; \ - \ - case 0: \ - if (_FP_FRAC_ZEROP_##wc(X)) \ - X##_c = FP_CLS_ZERO; \ - else \ - { \ - /* a denormalized number */ \ - _FP_I_TYPE _shift; \ - _FP_FRAC_CLZ_##wc(_shift, X); \ - _shift -= _FP_FRACXBITS_##fs; \ - _FP_FRAC_SLL_##wc(X, (_shift+_FP_WORKBITS)); \ - X##_e -= _FP_EXPBIAS_##fs - 1 + _shift; \ - X##_c = FP_CLS_NORMAL; \ - } \ - break; \ - \ - case _FP_EXPMAX_##fs: \ - if (_FP_FRAC_ZEROP_##wc(X)) \ - X##_c = FP_CLS_INF; \ - else \ - /* we don't differentiate between signaling and quiet nans */ \ - X##_c = FP_CLS_NAN; \ - break; \ - } \ -} while (0) - - -/* - * Before packing the bits back into the native fp result, take care - * of such mundane things as rounding and overflow. Also, for some - * kinds of fp values, the original parts may not have been fully - * extracted -- but that is ok, we can regenerate them now. - */ - -#define _FP_PACK_CANONICAL(fs, wc, X) \ -({int __ret = 0; \ - switch (X##_c) \ - { \ - case FP_CLS_NORMAL: \ - X##_e += _FP_EXPBIAS_##fs; \ - if (X##_e > 0) \ - { \ - __ret |= _FP_ROUND(wc, X); \ - if (_FP_FRAC_OVERP_##wc(fs, X)) \ - { \ - _FP_FRAC_SRL_##wc(X, (_FP_WORKBITS+1)); \ - X##_e++; \ - } \ - else \ - _FP_FRAC_SRL_##wc(X, _FP_WORKBITS); \ - if (X##_e >= _FP_EXPMAX_##fs) \ - { \ - /* overflow to infinity */ \ - X##_e = _FP_EXPMAX_##fs; \ - _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \ - __ret |= EFLAG_OVERFLOW; \ - } \ - } \ - else \ - { \ - /* we've got a denormalized number */ \ - X##_e = -X##_e + 1; \ - if (X##_e <= _FP_WFRACBITS_##fs) \ - { \ - _FP_FRAC_SRS_##wc(X, X##_e, _FP_WFRACBITS_##fs); \ - _FP_FRAC_SLL_##wc(X, 1); \ - if (_FP_FRAC_OVERP_##wc(fs, X)) \ - { \ - X##_e = 1; \ - _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \ - } \ - else \ - { \ - X##_e = 0; \ - _FP_FRAC_SRL_##wc(X, _FP_WORKBITS+1); \ - __ret |= EFLAG_UNDERFLOW; \ - } \ - } \ - else \ - { \ - /* underflow to zero */ \ - X##_e = 0; \ - _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \ - __ret |= EFLAG_UNDERFLOW; \ - } \ - } \ - break; \ - \ - case FP_CLS_ZERO: \ - X##_e = 0; \ - _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \ - break; \ - \ - case FP_CLS_INF: \ - X##_e = _FP_EXPMAX_##fs; \ - _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \ - break; \ - \ - case FP_CLS_NAN: \ - X##_e = _FP_EXPMAX_##fs; \ - if (!_FP_KEEPNANFRACP) \ - { \ - _FP_FRAC_SET_##wc(X, _FP_NANFRAC_##fs); \ - X##_s = 0; \ - } \ - else \ - _FP_FRAC_HIGH_##wc(X) |= _FP_QNANBIT_##fs; \ - break; \ - } \ - __ret; \ -}) - - -/* - * Main addition routine. The input values should be cooked. - */ - -#define _FP_ADD(fs, wc, R, X, Y) \ -do { \ - switch (_FP_CLS_COMBINE(X##_c, Y##_c)) \ - { \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL): \ - { \ - /* shift the smaller number so that its exponent matches the larger */ \ - _FP_I_TYPE diff = X##_e - Y##_e; \ - \ - if (diff < 0) \ - { \ - diff = -diff; \ - if (diff <= _FP_WFRACBITS_##fs) \ - _FP_FRAC_SRS_##wc(X, diff, _FP_WFRACBITS_##fs); \ - else if (!_FP_FRAC_ZEROP_##wc(X)) \ - _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc); \ - else \ - _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \ - R##_e = Y##_e; \ - } \ - else \ - { \ - if (diff > 0) \ - { \ - if (diff <= _FP_WFRACBITS_##fs) \ - _FP_FRAC_SRS_##wc(Y, diff, _FP_WFRACBITS_##fs); \ - else if (!_FP_FRAC_ZEROP_##wc(Y)) \ - _FP_FRAC_SET_##wc(Y, _FP_MINFRAC_##wc); \ - else \ - _FP_FRAC_SET_##wc(Y, _FP_ZEROFRAC_##wc); \ - } \ - R##_e = X##_e; \ - } \ - \ - R##_c = FP_CLS_NORMAL; \ - \ - if (X##_s == Y##_s) \ - { \ - R##_s = X##_s; \ - _FP_FRAC_ADD_##wc(R, X, Y); \ - if (_FP_FRAC_OVERP_##wc(fs, R)) \ - { \ - _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs); \ - R##_e++; \ - } \ - } \ - else \ - { \ - R##_s = X##_s; \ - _FP_FRAC_SUB_##wc(R, X, Y); \ - if (_FP_FRAC_ZEROP_##wc(R)) \ - { \ - /* return an exact zero */ \ - if (FP_ROUNDMODE == FP_RND_MINF) \ - R##_s |= Y##_s; \ - else \ - R##_s &= Y##_s; \ - R##_c = FP_CLS_ZERO; \ - } \ - else \ - { \ - if (_FP_FRAC_NEGP_##wc(R)) \ - { \ - _FP_FRAC_SUB_##wc(R, Y, X); \ - R##_s = Y##_s; \ - } \ - \ - /* renormalize after subtraction */ \ - _FP_FRAC_CLZ_##wc(diff, R); \ - diff -= _FP_WFRACXBITS_##fs; \ - if (diff) \ - { \ - R##_e -= diff; \ - _FP_FRAC_SLL_##wc(R, diff); \ - } \ - } \ - } \ - break; \ - } \ - \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN): \ - _FP_CHOOSENAN(fs, wc, R, X, Y); \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO): \ - R##_e = X##_e; \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL): \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF): \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO): \ - _FP_FRAC_COPY_##wc(R, X); \ - R##_s = X##_s; \ - R##_c = X##_c; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL): \ - R##_e = Y##_e; \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN): \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN): \ - _FP_FRAC_COPY_##wc(R, Y); \ - R##_s = Y##_s; \ - R##_c = Y##_c; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF): \ - if (X##_s != Y##_s) \ - { \ - /* +INF + -INF => NAN */ \ - _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \ - R##_s = X##_s ^ Y##_s; \ - R##_c = FP_CLS_NAN; \ - break; \ - } \ - /* FALLTHRU */ \ - \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL): \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO): \ - R##_s = X##_s; \ - R##_c = FP_CLS_INF; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF): \ - R##_s = Y##_s; \ - R##_c = FP_CLS_INF; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO): \ - /* make sure the sign is correct */ \ - if (FP_ROUNDMODE == FP_RND_MINF) \ - R##_s = X##_s | Y##_s; \ - else \ - R##_s = X##_s & Y##_s; \ - R##_c = FP_CLS_ZERO; \ - break; \ - \ - default: \ - abort(); \ - } \ -} while (0) - - -/* - * Main negation routine. FIXME -- when we care about setting exception - * bits reliably, this will not do. We should examine all of the fp classes. - */ - -#define _FP_NEG(fs, wc, R, X) \ - do { \ - _FP_FRAC_COPY_##wc(R, X); \ - R##_c = X##_c; \ - R##_e = X##_e; \ - R##_s = 1 ^ X##_s; \ - } while (0) - - -/* - * Main multiplication routine. The input values should be cooked. - */ - -#define _FP_MUL(fs, wc, R, X, Y) \ -do { \ - R##_s = X##_s ^ Y##_s; \ - switch (_FP_CLS_COMBINE(X##_c, Y##_c)) \ - { \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL): \ - R##_c = FP_CLS_NORMAL; \ - R##_e = X##_e + Y##_e + 1; \ - \ - _FP_MUL_MEAT_##fs(R,X,Y); \ - \ - if (_FP_FRAC_OVERP_##wc(fs, R)) \ - _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs); \ - else \ - R##_e--; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN): \ - _FP_CHOOSENAN(fs, wc, R, X, Y); \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL): \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF): \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO): \ - R##_s = X##_s; \ - \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF): \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO): \ - _FP_FRAC_COPY_##wc(R, X); \ - R##_c = X##_c; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN): \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN): \ - R##_s = Y##_s; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF): \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO): \ - _FP_FRAC_COPY_##wc(R, Y); \ - R##_c = Y##_c; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF): \ - R##_c = FP_CLS_NAN; \ - _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \ - break; \ - \ - default: \ - abort(); \ - } \ -} while (0) - - -/* - * Main division routine. The input values should be cooked. - */ - -#define _FP_DIV(fs, wc, R, X, Y) \ -do { \ - R##_s = X##_s ^ Y##_s; \ - switch (_FP_CLS_COMBINE(X##_c, Y##_c)) \ - { \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL): \ - R##_c = FP_CLS_NORMAL; \ - R##_e = X##_e - Y##_e; \ - \ - _FP_DIV_MEAT_##fs(R,X,Y); \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN): \ - _FP_CHOOSENAN(fs, wc, R, X, Y); \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL): \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF): \ - case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO): \ - R##_s = X##_s; \ - _FP_FRAC_COPY_##wc(R, X); \ - R##_c = X##_c; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN): \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN): \ - R##_s = Y##_s; \ - _FP_FRAC_COPY_##wc(R, Y); \ - R##_c = Y##_c; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL): \ - R##_c = FP_CLS_ZERO; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO): \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO): \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL): \ - R##_c = FP_CLS_INF; \ - break; \ - \ - case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF): \ - case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO): \ - R##_c = FP_CLS_NAN; \ - _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs); \ - break; \ - \ - default: \ - abort(); \ - } \ -} while (0) - - -/* - * Main differential comparison routine. The inputs should be raw not - * cooked. The return is -1,0,1 for normal values, 2 otherwise. - */ - -#define _FP_CMP(fs, wc, ret, X, Y, un) \ - do { \ - /* NANs are unordered */ \ - if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X)) \ - || (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y))) \ - { \ - ret = un; \ - } \ - else \ - { \ - int __x_zero = (!X##_e && _FP_FRAC_ZEROP_##wc(X)) ? 1 : 0; \ - int __y_zero = (!Y##_e && _FP_FRAC_ZEROP_##wc(Y)) ? 1 : 0; \ - \ - if (__x_zero && __y_zero) \ - ret = 0; \ - else if (__x_zero) \ - ret = Y##_s ? 1 : -1; \ - else if (__y_zero) \ - ret = X##_s ? -1 : 1; \ - else if (X##_s != Y##_s) \ - ret = X##_s ? -1 : 1; \ - else if (X##_e > Y##_e) \ - ret = X##_s ? -1 : 1; \ - else if (X##_e < Y##_e) \ - ret = X##_s ? 1 : -1; \ - else if (_FP_FRAC_GT_##wc(X, Y)) \ - ret = X##_s ? -1 : 1; \ - else if (_FP_FRAC_GT_##wc(Y, X)) \ - ret = X##_s ? 1 : -1; \ - else \ - ret = 0; \ - } \ - } while (0) - - -/* Simplification for strict equality. */ - -#define _FP_CMP_EQ(fs, wc, ret, X, Y) \ - do { \ - /* NANs are unordered */ \ - if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X)) \ - || (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y))) \ - { \ - ret = 1; \ - } \ - else \ - { \ - ret = !(X##_e == Y##_e \ - && _FP_FRAC_EQ_##wc(X, Y) \ - && (X##_s == Y##_s || !X##_e && _FP_FRAC_ZEROP_##wc(X))); \ - } \ - } while (0) - -/* - * Main square root routine. The input value should be cooked. - */ - -#define _FP_SQRT(fs, wc, R, X) \ -do { \ - _FP_FRAC_DECL_##wc(T); _FP_FRAC_DECL_##wc(S); \ - _FP_W_TYPE q; \ - switch (X##_c) \ - { \ - case FP_CLS_NAN: \ - R##_s = 0; \ - R##_c = FP_CLS_NAN; \ - _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc); \ - break; \ - case FP_CLS_INF: \ - if (X##_s) \ - { \ - R##_s = 0; \ - R##_c = FP_CLS_NAN; /* sNAN */ \ - } \ - else \ - { \ - R##_s = 0; \ - R##_c = FP_CLS_INF; /* sqrt(+inf) = +inf */ \ - } \ - break; \ - case FP_CLS_ZERO: \ - R##_s = X##_s; \ - R##_c = FP_CLS_ZERO; /* sqrt(+-0) = +-0 */ \ - break; \ - case FP_CLS_NORMAL: \ - R##_s = 0; \ - if (X##_s) \ - { \ - R##_c = FP_CLS_NAN; /* sNAN */ \ - break; \ - } \ - R##_c = FP_CLS_NORMAL; \ - if (X##_e & 1) \ - _FP_FRAC_SLL_##wc(X, 1); \ - R##_e = X##_e >> 1; \ - _FP_FRAC_SET_##wc(S, _FP_ZEROFRAC_##wc); \ - _FP_FRAC_SET_##wc(R, _FP_ZEROFRAC_##wc); \ - q = _FP_OVERFLOW_##fs; \ - _FP_FRAC_SLL_##wc(X, 1); \ - _FP_SQRT_MEAT_##wc(R, S, T, X, q); \ - _FP_FRAC_SRL_##wc(R, 1); \ - } \ - } while (0) - -/* - * Convert from FP to integer - */ - -/* "When a NaN, infinity, large positive argument >= 2147483648.0, or - * large negative argument <= -2147483649.0 is converted to an integer, - * the invalid_current bit...should be set and fp_exception_IEEE_754 should - * be raised. If the floating point invalid trap is disabled, no trap occurs - * and a numerical result is generated: if the sign bit of the operand - * is 0, the result is 2147483647; if the sign bit of the operand is 1, - * the result is -2147483648." - * Similarly for conversion to extended ints, except that the boundaries - * are >= 2^63, <= -(2^63 + 1), and the results are 2^63 + 1 for s=0 and - * -2^63 for s=1. - * -- SPARC Architecture Manual V9, Appendix B, which specifies how - * SPARCs resolve implementation dependencies in the IEEE-754 spec. - * I don't believe that the code below follows this. I'm not even sure - * it's right! - * It doesn't cope with needing to convert to an n bit integer when there - * is no n bit integer type. Fortunately gcc provides long long so this - * isn't a problem for sparc32. - * I have, however, fixed its NaN handling to conform as above. - * -- PMM 02/1998 - * NB: rsigned is not 'is r declared signed?' but 'should the value stored - * in r be signed or unsigned?'. r is always(?) declared unsigned. - * Comments below are mine, BTW -- PMM - */ -#define _FP_TO_INT(fs, wc, r, X, rsize, rsigned) \ - do { \ - switch (X##_c) \ - { \ - case FP_CLS_NORMAL: \ - if (X##_e < 0) \ - { \ - /* case FP_CLS_NAN: see above! */ \ - case FP_CLS_ZERO: \ - r = 0; \ - } \ - else if (X##_e >= rsize - (rsigned != 0)) \ - { /* overflow */ \ - case FP_CLS_NAN: \ - case FP_CLS_INF: \ - if (rsigned) \ - { \ - r = 1; \ - r <<= rsize - 1; \ - r -= 1 - X##_s; \ - } \ - else \ - { \ - r = 0; \ - if (!X##_s) \ - r = ~r; \ - } \ - } \ - else \ - { \ - if (_FP_W_TYPE_SIZE*wc < rsize) \ - { \ - _FP_FRAC_ASSEMBLE_##wc(r, X, rsize); \ - r <<= X##_e - _FP_WFRACBITS_##fs; \ - } \ - else \ - { \ - if (X##_e >= _FP_WFRACBITS_##fs) \ - _FP_FRAC_SLL_##wc(X, (X##_e - _FP_WFRACBITS_##fs + 1));\ - else \ - _FP_FRAC_SRL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1));\ - _FP_FRAC_ASSEMBLE_##wc(r, X, rsize); \ - } \ - if (rsigned && X##_s) \ - r = -r; \ - } \ - break; \ - } \ - } while (0) - -#define _FP_FROM_INT(fs, wc, X, r, rsize, rtype) \ - do { \ - if (r) \ - { \ - X##_c = FP_CLS_NORMAL; \ - \ - if ((X##_s = (r < 0))) \ - r = -r; \ - /* Note that `r' is now considered unsigned, so we don't have \ - to worry about the single signed overflow case. */ \ - \ - if (rsize <= _FP_W_TYPE_SIZE) \ - __FP_CLZ(X##_e, r); \ - else \ - __FP_CLZ_2(X##_e, (_FP_W_TYPE)(r >> _FP_W_TYPE_SIZE), \ - (_FP_W_TYPE)r); \ - if (rsize < _FP_W_TYPE_SIZE) \ - X##_e -= (_FP_W_TYPE_SIZE - rsize); \ - X##_e = rsize - X##_e - 1; \ - \ - if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e) \ - __FP_FRAC_SRS_1(r, (X##_e - _FP_WFRACBITS_##fs), rsize); \ - r &= ~((_FP_W_TYPE)1 << X##_e); \ - _FP_FRAC_DISASSEMBLE_##wc(X, ((unsigned rtype)r), rsize); \ - _FP_FRAC_SLL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1)); \ - } \ - else \ - { \ - X##_c = FP_CLS_ZERO, X##_s = 0; \ - } \ - } while (0) - - -#define FP_CONV(dfs,sfs,dwc,swc,D,S) \ - do { \ - _FP_FRAC_CONV_##dwc##_##swc(dfs, sfs, D, S); \ - D##_e = S##_e; \ - D##_c = S##_c; \ - D##_s = S##_s; \ - } while (0) - -/* - * Helper primitives. - */ - -/* Count leading zeros in a word. */ - -#ifndef __FP_CLZ -#if _FP_W_TYPE_SIZE < 64 -/* this is just to shut the compiler up about shifts > word length -- PMM 02/1998 */ -#define __FP_CLZ(r, x) \ - do { \ - _FP_W_TYPE _t = (x); \ - r = _FP_W_TYPE_SIZE - 1; \ - if (_t > 0xffff) r -= 16; \ - if (_t > 0xffff) _t >>= 16; \ - if (_t > 0xff) r -= 8; \ - if (_t > 0xff) _t >>= 8; \ - if (_t & 0xf0) r -= 4; \ - if (_t & 0xf0) _t >>= 4; \ - if (_t & 0xc) r -= 2; \ - if (_t & 0xc) _t >>= 2; \ - if (_t & 0x2) r -= 1; \ - } while (0) -#else /* not _FP_W_TYPE_SIZE < 64 */ -#define __FP_CLZ(r, x) \ - do { \ - _FP_W_TYPE _t = (x); \ - r = _FP_W_TYPE_SIZE - 1; \ - if (_t > 0xffffffff) r -= 32; \ - if (_t > 0xffffffff) _t >>= 32; \ - if (_t > 0xffff) r -= 16; \ - if (_t > 0xffff) _t >>= 16; \ - if (_t > 0xff) r -= 8; \ - if (_t > 0xff) _t >>= 8; \ - if (_t & 0xf0) r -= 4; \ - if (_t & 0xf0) _t >>= 4; \ - if (_t & 0xc) r -= 2; \ - if (_t & 0xc) _t >>= 2; \ - if (_t & 0x2) r -= 1; \ - } while (0) -#endif /* not _FP_W_TYPE_SIZE < 64 */ -#endif /* ndef __FP_CLZ */ - -#define _FP_DIV_HELP_imm(q, r, n, d) \ - do { \ - q = n / d, r = n % d; \ - } while (0) - diff --git a/arch/ppc/math-emu/sfp-machine.h b/arch/ppc/math-emu/sfp-machine.h deleted file mode 100644 index 4b17d83cfcd..00000000000 --- a/arch/ppc/math-emu/sfp-machine.h +++ /dev/null @@ -1,377 +0,0 @@ -/* Machine-dependent software floating-point definitions. PPC version. - Copyright (C) 1997 Free Software Foundation, Inc. - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If - not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - Actually, this is a PPC (32bit) version, written based on the - i386, sparc, and sparc64 versions, by me, - Peter Maydell (pmaydell@chiark.greenend.org.uk). - Comments are by and large also mine, although they may be inaccurate. - - In picking out asm fragments I've gone with the lowest common - denominator, which also happens to be the hardware I have :-> - That is, a SPARC without hardware multiply and divide. - */ - -/* basic word size definitions */ -#define _FP_W_TYPE_SIZE 32 -#define _FP_W_TYPE unsigned long -#define _FP_WS_TYPE signed long -#define _FP_I_TYPE long - -#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) -#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) - -/* You can optionally code some things like addition in asm. For - * example, i386 defines __FP_FRAC_ADD_2 as asm. If you don't - * then you get a fragment of C code [if you change an #ifdef 0 - * in op-2.h] or a call to add_ssaaaa (see below). - * Good places to look for asm fragments to use are gcc and glibc. - * gcc's longlong.h is useful. - */ - -/* We need to know how to multiply and divide. If the host word size - * is >= 2*fracbits you can use FP_MUL_MEAT_n_imm(t,R,X,Y) which - * codes the multiply with whatever gcc does to 'a * b'. - * _FP_MUL_MEAT_n_wide(t,R,X,Y,f) is used when you have an asm - * function that can multiply two 1W values and get a 2W result. - * Otherwise you're stuck with _FP_MUL_MEAT_n_hard(t,R,X,Y) which - * does bitshifting to avoid overflow. - * For division there is FP_DIV_MEAT_n_imm(t,R,X,Y,f) for word size - * >= 2*fracbits, where f is either _FP_DIV_HELP_imm or - * _FP_DIV_HELP_ldiv (see op-1.h). - * _FP_DIV_MEAT_udiv() is if you have asm to do 2W/1W => (1W, 1W). - * [GCC and glibc have longlong.h which has the asm macro udiv_qrnnd - * to do this.] - * In general, 'n' is the number of words required to hold the type, - * and 't' is either S, D or Q for single/double/quad. - * -- PMM - */ -/* Example: SPARC64: - * #define _FP_MUL_MEAT_S(R,X,Y) _FP_MUL_MEAT_1_imm(S,R,X,Y) - * #define _FP_MUL_MEAT_D(R,X,Y) _FP_MUL_MEAT_1_wide(D,R,X,Y,umul_ppmm) - * #define _FP_MUL_MEAT_Q(R,X,Y) _FP_MUL_MEAT_2_wide(Q,R,X,Y,umul_ppmm) - * - * #define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm) - * #define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_1_udiv(D,R,X,Y) - * #define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_2_udiv_64(Q,R,X,Y) - * - * Example: i386: - * #define _FP_MUL_MEAT_S(R,X,Y) _FP_MUL_MEAT_1_wide(S,R,X,Y,_i386_mul_32_64) - * #define _FP_MUL_MEAT_D(R,X,Y) _FP_MUL_MEAT_2_wide(D,R,X,Y,_i386_mul_32_64) - * - * #define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y,_i386_div_64_32) - * #define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv_64(D,R,X,Y) - */ - -#define _FP_MUL_MEAT_S(R,X,Y) _FP_MUL_MEAT_1_wide(S,R,X,Y,umul_ppmm) -#define _FP_MUL_MEAT_D(R,X,Y) _FP_MUL_MEAT_2_wide(D,R,X,Y,umul_ppmm) - -#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) -#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv_64(D,R,X,Y) - -/* These macros define what NaN looks like. They're supposed to expand to - * a comma-separated set of 32bit unsigned ints that encode NaN. - */ -#define _FP_NANFRAC_S _FP_QNANBIT_S -#define _FP_NANFRAC_D _FP_QNANBIT_D, 0 -#define _FP_NANFRAC_Q _FP_QNANBIT_Q, 0, 0, 0 - -#define _FP_KEEPNANFRACP 1 - -/* This macro appears to be called when both X and Y are NaNs, and - * has to choose one and copy it to R. i386 goes for the larger of the - * two, sparc64 just picks Y. I don't understand this at all so I'll - * go with sparc64 because it's shorter :-> -- PMM - */ -#define _FP_CHOOSENAN(fs, wc, R, X, Y) \ - do { \ - R##_s = Y##_s; \ - _FP_FRAC_COPY_##wc(R,Y); \ - R##_c = FP_CLS_NAN; \ - } while (0) - - -extern void fp_unpack_d(long *, unsigned long *, unsigned long *, - long *, long *, void *); -extern int fp_pack_d(void *, long, unsigned long, unsigned long, long, long); -extern int fp_pack_ds(void *, long, unsigned long, unsigned long, long, long); - -#define __FP_UNPACK_RAW_1(fs, X, val) \ - do { \ - union _FP_UNION_##fs *_flo = \ - (union _FP_UNION_##fs *)val; \ - \ - X##_f = _flo->bits.frac; \ - X##_e = _flo->bits.exp; \ - X##_s = _flo->bits.sign; \ - } while (0) - -#define __FP_UNPACK_RAW_2(fs, X, val) \ - do { \ - union _FP_UNION_##fs *_flo = \ - (union _FP_UNION_##fs *)val; \ - \ - X##_f0 = _flo->bits.frac0; \ - X##_f1 = _flo->bits.frac1; \ - X##_e = _flo->bits.exp; \ - X##_s = _flo->bits.sign; \ - } while (0) - -#define __FP_UNPACK_S(X,val) \ - do { \ - __FP_UNPACK_RAW_1(S,X,val); \ - _FP_UNPACK_CANONICAL(S,1,X); \ - } while (0) - -#define __FP_UNPACK_D(X,val) \ - fp_unpack_d(&X##_s, &X##_f1, &X##_f0, &X##_e, &X##_c, val) - -#define __FP_PACK_RAW_1(fs, val, X) \ - do { \ - union _FP_UNION_##fs *_flo = \ - (union _FP_UNION_##fs *)val; \ - \ - _flo->bits.frac = X##_f; \ - _flo->bits.exp = X##_e; \ - _flo->bits.sign = X##_s; \ - } while (0) - -#define __FP_PACK_RAW_2(fs, val, X) \ - do { \ - union _FP_UNION_##fs *_flo = \ - (union _FP_UNION_##fs *)val; \ - \ - _flo->bits.frac0 = X##_f0; \ - _flo->bits.frac1 = X##_f1; \ - _flo->bits.exp = X##_e; \ - _flo->bits.sign = X##_s; \ - } while (0) - -#include <linux/kernel.h> -#include <linux/sched.h> - -#define __FPU_FPSCR (current->thread.fpscr.val) - -/* We only actually write to the destination register - * if exceptions signalled (if any) will not trap. - */ -#define __FPU_ENABLED_EXC \ -({ \ - (__FPU_FPSCR >> 3) & 0x1f; \ -}) - -#define __FPU_TRAP_P(bits) \ - ((__FPU_ENABLED_EXC & (bits)) != 0) - -#define __FP_PACK_S(val,X) \ -({ int __exc = _FP_PACK_CANONICAL(S,1,X); \ - if(!__exc || !__FPU_TRAP_P(__exc)) \ - __FP_PACK_RAW_1(S,val,X); \ - __exc; \ -}) - -#define __FP_PACK_D(val,X) \ - fp_pack_d(val, X##_s, X##_f1, X##_f0, X##_e, X##_c) - -#define __FP_PACK_DS(val,X) \ - fp_pack_ds(val, X##_s, X##_f1, X##_f0, X##_e, X##_c) - -/* Obtain the current rounding mode. */ -#define FP_ROUNDMODE \ -({ \ - __FPU_FPSCR & 0x3; \ -}) - -/* the asm fragments go here: all these are taken from glibc-2.0.5's - * stdlib/longlong.h - */ - -#include <linux/types.h> -#include <asm/byteorder.h> - -/* add_ssaaaa is used in op-2.h and should be equivalent to - * #define add_ssaaaa(sh,sl,ah,al,bh,bl) (sh = ah+bh+ (( sl = al+bl) < al)) - * add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1, - * high_addend_2, low_addend_2) adds two UWtype integers, composed by - * HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2 - * respectively. The result is placed in HIGH_SUM and LOW_SUM. Overflow - * (i.e. carry out) is not stored anywhere, and is lost. - */ -#define add_ssaaaa(sh, sl, ah, al, bh, bl) \ - do { \ - if (__builtin_constant_p (bh) && (bh) == 0) \ - __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ - : "%r" ((USItype)(ah)), \ - "%r" ((USItype)(al)), \ - "rI" ((USItype)(bl))); \ - else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0) \ - __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ - : "%r" ((USItype)(ah)), \ - "%r" ((USItype)(al)), \ - "rI" ((USItype)(bl))); \ - else \ - __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ - : "%r" ((USItype)(ah)), \ - "r" ((USItype)(bh)), \ - "%r" ((USItype)(al)), \ - "rI" ((USItype)(bl))); \ - } while (0) - -/* sub_ddmmss is used in op-2.h and udivmodti4.c and should be equivalent to - * #define sub_ddmmss(sh, sl, ah, al, bh, bl) (sh = ah-bh - ((sl = al-bl) > al)) - * sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend, - * high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers, - * composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and - * LOW_SUBTRAHEND_2 respectively. The result is placed in HIGH_DIFFERENCE - * and LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere, - * and is lost. - */ -#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ - do { \ - if (__builtin_constant_p (ah) && (ah) == 0) \ - __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ - : "r" ((USItype)(bh)), \ - "rI" ((USItype)(al)), \ - "r" ((USItype)(bl))); \ - else if (__builtin_constant_p (ah) && (ah) ==~(USItype) 0) \ - __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ - : "r" ((USItype)(bh)), \ - "rI" ((USItype)(al)), \ - "r" ((USItype)(bl))); \ - else if (__builtin_constant_p (bh) && (bh) == 0) \ - __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ - : "r" ((USItype)(ah)), \ - "rI" ((USItype)(al)), \ - "r" ((USItype)(bl))); \ - else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0) \ - __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ - : "r" ((USItype)(ah)), \ - "rI" ((USItype)(al)), \ - "r" ((USItype)(bl))); \ - else \ - __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \ - : "=r" ((USItype)(sh)), \ - "=&r" ((USItype)(sl)) \ - : "r" ((USItype)(ah)), \ - "r" ((USItype)(bh)), \ - "rI" ((USItype)(al)), \ - "r" ((USItype)(bl))); \ - } while (0) - -/* asm fragments for mul and div */ - -/* umul_ppmm(high_prod, low_prod, multipler, multiplicand) multiplies two - * UWtype integers MULTIPLER and MULTIPLICAND, and generates a two UWtype - * word product in HIGH_PROD and LOW_PROD. - */ -#define umul_ppmm(ph, pl, m0, m1) \ - do { \ - USItype __m0 = (m0), __m1 = (m1); \ - __asm__ ("mulhwu %0,%1,%2" \ - : "=r" ((USItype)(ph)) \ - : "%r" (__m0), \ - "r" (__m1)); \ - (pl) = __m0 * __m1; \ - } while (0) - -/* udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, - * denominator) divides a UDWtype, composed by the UWtype integers - * HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient - * in QUOTIENT and the remainder in REMAINDER. HIGH_NUMERATOR must be less - * than DENOMINATOR for correct operation. If, in addition, the most - * significant bit of DENOMINATOR must be 1, then the pre-processor symbol - * UDIV_NEEDS_NORMALIZATION is defined to 1. - */ -#define udiv_qrnnd(q, r, n1, n0, d) \ - do { \ - UWtype __d1, __d0, __q1, __q0, __r1, __r0, __m; \ - __d1 = __ll_highpart (d); \ - __d0 = __ll_lowpart (d); \ - \ - __r1 = (n1) % __d1; \ - __q1 = (n1) / __d1; \ - __m = (UWtype) __q1 * __d0; \ - __r1 = __r1 * __ll_B | __ll_highpart (n0); \ - if (__r1 < __m) \ - { \ - __q1--, __r1 += (d); \ - if (__r1 >= (d)) /* we didn't get carry when adding to __r1 */ \ - if (__r1 < __m) \ - __q1--, __r1 += (d); \ - } \ - __r1 -= __m; \ - \ - __r0 = __r1 % __d1; \ - __q0 = __r1 / __d1; \ - __m = (UWtype) __q0 * __d0; \ - __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ - if (__r0 < __m) \ - { \ - __q0--, __r0 += (d); \ - if (__r0 >= (d)) \ - if (__r0 < __m) \ - __q0--, __r0 += (d); \ - } \ - __r0 -= __m; \ - \ - (q) = (UWtype) __q1 * __ll_B | __q0; \ - (r) = __r0; \ - } while (0) - -#define UDIV_NEEDS_NORMALIZATION 1 - -#define abort() \ - return 0 - -#ifdef __BIG_ENDIAN -#define __BYTE_ORDER __BIG_ENDIAN -#else -#define __BYTE_ORDER __LITTLE_ENDIAN -#endif - -/* Exception flags. */ -#define EFLAG_INVALID (1 << (31 - 2)) -#define EFLAG_OVERFLOW (1 << (31 - 3)) -#define EFLAG_UNDERFLOW (1 << (31 - 4)) -#define EFLAG_DIVZERO (1 << (31 - 5)) -#define EFLAG_INEXACT (1 << (31 - 6)) - -#define EFLAG_VXSNAN (1 << (31 - 7)) -#define EFLAG_VXISI (1 << (31 - 8)) -#define EFLAG_VXIDI (1 << (31 - 9)) -#define EFLAG_VXZDZ (1 << (31 - 10)) -#define EFLAG_VXIMZ (1 << (31 - 11)) -#define EFLAG_VXVC (1 << (31 - 12)) -#define EFLAG_VXSOFT (1 << (31 - 21)) -#define EFLAG_VXSQRT (1 << (31 - 22)) -#define EFLAG_VXCVI (1 << (31 - 23)) diff --git a/arch/ppc/math-emu/single.h b/arch/ppc/math-emu/single.h deleted file mode 100644 index f19d9945181..00000000000 --- a/arch/ppc/math-emu/single.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Definitions for IEEE Single Precision - */ - -#if _FP_W_TYPE_SIZE < 32 -#error "Here's a nickel kid. Go buy yourself a real computer." -#endif - -#define _FP_FRACBITS_S 24 -#define _FP_FRACXBITS_S (_FP_W_TYPE_SIZE - _FP_FRACBITS_S) -#define _FP_WFRACBITS_S (_FP_WORKBITS + _FP_FRACBITS_S) -#define _FP_WFRACXBITS_S (_FP_W_TYPE_SIZE - _FP_WFRACBITS_S) -#define _FP_EXPBITS_S 8 -#define _FP_EXPBIAS_S 127 -#define _FP_EXPMAX_S 255 -#define _FP_QNANBIT_S ((_FP_W_TYPE)1 << (_FP_FRACBITS_S-2)) -#define _FP_IMPLBIT_S ((_FP_W_TYPE)1 << (_FP_FRACBITS_S-1)) -#define _FP_OVERFLOW_S ((_FP_W_TYPE)1 << (_FP_WFRACBITS_S)) - -/* The implementation of _FP_MUL_MEAT_S and _FP_DIV_MEAT_S should be - chosen by the target machine. */ - -union _FP_UNION_S -{ - float flt; - struct { -#if __BYTE_ORDER == __BIG_ENDIAN - unsigned sign : 1; - unsigned exp : _FP_EXPBITS_S; - unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0); -#else - unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0); - unsigned exp : _FP_EXPBITS_S; - unsigned sign : 1; -#endif - } bits __attribute__((packed)); -}; - -#define FP_DECL_S(X) _FP_DECL(1,X) -#define FP_UNPACK_RAW_S(X,val) _FP_UNPACK_RAW_1(S,X,val) -#define FP_PACK_RAW_S(val,X) _FP_PACK_RAW_1(S,val,X) - -#define FP_UNPACK_S(X,val) \ - do { \ - _FP_UNPACK_RAW_1(S,X,val); \ - _FP_UNPACK_CANONICAL(S,1,X); \ - } while (0) - -#define FP_PACK_S(val,X) \ - do { \ - _FP_PACK_CANONICAL(S,1,X); \ - _FP_PACK_RAW_1(S,val,X); \ - } while (0) - -#define FP_NEG_S(R,X) _FP_NEG(S,1,R,X) -#define FP_ADD_S(R,X,Y) _FP_ADD(S,1,R,X,Y) -#define FP_SUB_S(R,X,Y) _FP_SUB(S,1,R,X,Y) -#define FP_MUL_S(R,X,Y) _FP_MUL(S,1,R,X,Y) -#define FP_DIV_S(R,X,Y) _FP_DIV(S,1,R,X,Y) -#define FP_SQRT_S(R,X) _FP_SQRT(S,1,R,X) - -#define FP_CMP_S(r,X,Y,un) _FP_CMP(S,1,r,X,Y,un) -#define FP_CMP_EQ_S(r,X,Y) _FP_CMP_EQ(S,1,r,X,Y) - -#define FP_TO_INT_S(r,X,rsz,rsg) _FP_TO_INT(S,1,r,X,rsz,rsg) -#define FP_FROM_INT_S(X,r,rs,rt) _FP_FROM_INT(S,1,X,r,rs,rt) diff --git a/arch/ppc/math-emu/soft-fp.h b/arch/ppc/math-emu/soft-fp.h deleted file mode 100644 index cca39598f87..00000000000 --- a/arch/ppc/math-emu/soft-fp.h +++ /dev/null @@ -1,104 +0,0 @@ -#ifndef SOFT_FP_H -#define SOFT_FP_H - -#include "sfp-machine.h" - -#define _FP_WORKBITS 3 -#define _FP_WORK_LSB ((_FP_W_TYPE)1 << 3) -#define _FP_WORK_ROUND ((_FP_W_TYPE)1 << 2) -#define _FP_WORK_GUARD ((_FP_W_TYPE)1 << 1) -#define _FP_WORK_STICKY ((_FP_W_TYPE)1 << 0) - -#ifndef FP_RND_NEAREST -# define FP_RND_NEAREST 0 -# define FP_RND_ZERO 1 -# define FP_RND_PINF 2 -# define FP_RND_MINF 3 -#ifndef FP_ROUNDMODE -# define FP_ROUNDMODE FP_RND_NEAREST -#endif -#endif - -#define _FP_ROUND_NEAREST(wc, X) \ -({ int __ret = 0; \ - int __frac = _FP_FRAC_LOW_##wc(X) & 15; \ - if (__frac & 7) { \ - __ret = EFLAG_INEXACT; \ - if ((__frac & 7) != _FP_WORK_ROUND) \ - _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND); \ - else if (__frac & _FP_WORK_LSB) \ - _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND); \ - } \ - __ret; \ -}) - -#define _FP_ROUND_ZERO(wc, X) \ -({ int __ret = 0; \ - if (_FP_FRAC_LOW_##wc(X) & 7) \ - __ret = EFLAG_INEXACT; \ - __ret; \ -}) - -#define _FP_ROUND_PINF(wc, X) \ -({ int __ret = EFLAG_INEXACT; \ - if (!X##_s && (_FP_FRAC_LOW_##wc(X) & 7)) \ - _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB); \ - else __ret = 0; \ - __ret; \ -}) - -#define _FP_ROUND_MINF(wc, X) \ -({ int __ret = EFLAG_INEXACT; \ - if (X##_s && (_FP_FRAC_LOW_##wc(X) & 7)) \ - _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB); \ - else __ret = 0; \ - __ret; \ -}) - -#define _FP_ROUND(wc, X) \ -({ int __ret = 0; \ - switch (FP_ROUNDMODE) \ - { \ - case FP_RND_NEAREST: \ - __ret |= _FP_ROUND_NEAREST(wc,X); \ - break; \ - case FP_RND_ZERO: \ - __ret |= _FP_ROUND_ZERO(wc,X); \ - break; \ - case FP_RND_PINF: \ - __ret |= _FP_ROUND_PINF(wc,X); \ - break; \ - case FP_RND_MINF: \ - __ret |= _FP_ROUND_MINF(wc,X); \ - break; \ - }; \ - __ret; \ -}) - -#define FP_CLS_NORMAL 0 -#define FP_CLS_ZERO 1 -#define FP_CLS_INF 2 -#define FP_CLS_NAN 3 - -#define _FP_CLS_COMBINE(x,y) (((x) << 2) | (y)) - -#include "op-1.h" -#include "op-2.h" -#include "op-4.h" -#include "op-common.h" - -/* Sigh. Silly things longlong.h needs. */ -#define UWtype _FP_W_TYPE -#define W_TYPE_SIZE _FP_W_TYPE_SIZE - -typedef int SItype __attribute__((mode(SI))); -typedef int DItype __attribute__((mode(DI))); -typedef unsigned int USItype __attribute__((mode(SI))); -typedef unsigned int UDItype __attribute__((mode(DI))); -#if _FP_W_TYPE_SIZE == 32 -typedef unsigned int UHWtype __attribute__((mode(HI))); -#elif _FP_W_TYPE_SIZE == 64 -typedef USItype UHWtype; -#endif - -#endif diff --git a/arch/ppc/math-emu/stfd.c b/arch/ppc/math-emu/stfd.c deleted file mode 100644 index 3f8c2558a9e..00000000000 --- a/arch/ppc/math-emu/stfd.c +++ /dev/null @@ -1,20 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -int -stfd(void *frS, void *ea) -{ -#if 0 -#ifdef DEBUG - printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea); - dump_double(frS); - printk("\n"); -#endif -#endif - - if (copy_to_user(ea, frS, sizeof(double))) - return -EFAULT; - - return 0; -} diff --git a/arch/ppc/math-emu/stfiwx.c b/arch/ppc/math-emu/stfiwx.c deleted file mode 100644 index 95caaeec6a0..00000000000 --- a/arch/ppc/math-emu/stfiwx.c +++ /dev/null @@ -1,16 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -int -stfiwx(u32 *frS, void *ea) -{ -#ifdef DEBUG - printk("%s: %p %p\n", __FUNCTION__, frS, ea); -#endif - - if (copy_to_user(ea, &frS[1], sizeof(frS[1]))) - return -EFAULT; - - return 0; -} diff --git a/arch/ppc/math-emu/stfs.c b/arch/ppc/math-emu/stfs.c deleted file mode 100644 index e87ca23c6dc..00000000000 --- a/arch/ppc/math-emu/stfs.c +++ /dev/null @@ -1,41 +0,0 @@ -#include <linux/types.h> -#include <linux/errno.h> -#include <asm/uaccess.h> - -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -int -stfs(void *frS, void *ea) -{ - FP_DECL_D(A); - FP_DECL_S(R); - float f; - int err; - -#ifdef DEBUG - printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea); -#endif - - __FP_UNPACK_D(A, frS); - -#ifdef DEBUG - printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c); -#endif - - FP_CONV(S, D, 1, 2, R, A); - -#ifdef DEBUG - printk("R: %ld %lu %ld (%ld)\n", R_s, R_f, R_e, R_c); -#endif - - err = _FP_PACK_CANONICAL(S, 1, R); - if (!err || !__FPU_TRAP_P(err)) { - __FP_PACK_RAW_1(S, &f, R); - if (copy_to_user(ea, &f, sizeof(float))) - return -EFAULT; - } - - return err; -} diff --git a/arch/ppc/math-emu/types.c b/arch/ppc/math-emu/types.c deleted file mode 100644 index e1ed15d829d..00000000000 --- a/arch/ppc/math-emu/types.c +++ /dev/null @@ -1,51 +0,0 @@ -#include "soft-fp.h" -#include "double.h" -#include "single.h" - -void -fp_unpack_d(long *_s, unsigned long *_f1, unsigned long *_f0, - long *_e, long *_c, void *val) -{ - FP_DECL_D(X); - - __FP_UNPACK_RAW_2(D, X, val); - - _FP_UNPACK_CANONICAL(D, 2, X); - - *_s = X_s; - *_f1 = X_f1; - *_f0 = X_f0; - *_e = X_e; - *_c = X_c; -} - -int -fp_pack_d(void *val, long X_s, unsigned long X_f1, - unsigned long X_f0, long X_e, long X_c) -{ - int exc; - - exc = _FP_PACK_CANONICAL(D, 2, X); - if (!exc || !__FPU_TRAP_P(exc)) - __FP_PACK_RAW_2(D, val, X); - return exc; -} - -int -fp_pack_ds(void *val, long X_s, unsigned long X_f1, - unsigned long X_f0, long X_e, long X_c) -{ - FP_DECL_S(__X); - int exc; - - FP_CONV(S, D, 1, 2, __X, X); - exc = _FP_PACK_CANONICAL(S, 1, __X); - if (!exc || !__FPU_TRAP_P(exc)) { - _FP_UNPACK_CANONICAL(S, 1, __X); - FP_CONV(D, S, 2, 1, X, __X); - exc |= _FP_PACK_CANONICAL(D, 2, X); - if (!exc || !__FPU_TRAP_P(exc)) - __FP_PACK_RAW_2(D, val, X); - } - return exc; -} diff --git a/arch/ppc/math-emu/udivmodti4.c b/arch/ppc/math-emu/udivmodti4.c deleted file mode 100644 index 7e112dc1e2f..00000000000 --- a/arch/ppc/math-emu/udivmodti4.c +++ /dev/null @@ -1,191 +0,0 @@ -/* This has so very few changes over libgcc2's __udivmoddi4 it isn't funny. */ - -#include "soft-fp.h" - -#undef count_leading_zeros -#define count_leading_zeros __FP_CLZ - -void -_fp_udivmodti4(_FP_W_TYPE q[2], _FP_W_TYPE r[2], - _FP_W_TYPE n1, _FP_W_TYPE n0, - _FP_W_TYPE d1, _FP_W_TYPE d0) -{ - _FP_W_TYPE q0, q1, r0, r1; - _FP_I_TYPE b, bm; - - if (d1 == 0) - { -#if !UDIV_NEEDS_NORMALIZATION - if (d0 > n1) - { - /* 0q = nn / 0D */ - - udiv_qrnnd (q0, n0, n1, n0, d0); - q1 = 0; - - /* Remainder in n0. */ - } - else - { - /* qq = NN / 0d */ - - if (d0 == 0) - d0 = 1 / d0; /* Divide intentionally by zero. */ - - udiv_qrnnd (q1, n1, 0, n1, d0); - udiv_qrnnd (q0, n0, n1, n0, d0); - - /* Remainder in n0. */ - } - - r0 = n0; - r1 = 0; - -#else /* UDIV_NEEDS_NORMALIZATION */ - - if (d0 > n1) - { - /* 0q = nn / 0D */ - - count_leading_zeros (bm, d0); - - if (bm != 0) - { - /* Normalize, i.e. make the most significant bit of the - denominator set. */ - - d0 = d0 << bm; - n1 = (n1 << bm) | (n0 >> (_FP_W_TYPE_SIZE - bm)); - n0 = n0 << bm; - } - - udiv_qrnnd (q0, n0, n1, n0, d0); - q1 = 0; - - /* Remainder in n0 >> bm. */ - } - else - { - /* qq = NN / 0d */ - - if (d0 == 0) - d0 = 1 / d0; /* Divide intentionally by zero. */ - - count_leading_zeros (bm, d0); - - if (bm == 0) - { - /* From (n1 >= d0) /\ (the most significant bit of d0 is set), - conclude (the most significant bit of n1 is set) /\ (the - leading quotient digit q1 = 1). - - This special case is necessary, not an optimization. - (Shifts counts of SI_TYPE_SIZE are undefined.) */ - - n1 -= d0; - q1 = 1; - } - else - { - _FP_W_TYPE n2; - - /* Normalize. */ - - b = _FP_W_TYPE_SIZE - bm; - - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd (q1, n1, n2, n1, d0); - } - - /* n1 != d0... */ - - udiv_qrnnd (q0, n0, n1, n0, d0); - - /* Remainder in n0 >> bm. */ - } - - r0 = n0 >> bm; - r1 = 0; -#endif /* UDIV_NEEDS_NORMALIZATION */ - } - else - { - if (d1 > n1) - { - /* 00 = nn / DD */ - - q0 = 0; - q1 = 0; - - /* Remainder in n1n0. */ - r0 = n0; - r1 = n1; - } - else - { - /* 0q = NN / dd */ - - count_leading_zeros (bm, d1); - if (bm == 0) - { - /* From (n1 >= d1) /\ (the most significant bit of d1 is set), - conclude (the most significant bit of n1 is set) /\ (the - quotient digit q0 = 0 or 1). - - This special case is necessary, not an optimization. */ - - /* The condition on the next line takes advantage of that - n1 >= d1 (true due to program flow). */ - if (n1 > d1 || n0 >= d0) - { - q0 = 1; - sub_ddmmss (n1, n0, n1, n0, d1, d0); - } - else - q0 = 0; - - q1 = 0; - - r0 = n0; - r1 = n1; - } - else - { - _FP_W_TYPE m1, m0, n2; - - /* Normalize. */ - - b = _FP_W_TYPE_SIZE - bm; - - d1 = (d1 << bm) | (d0 >> b); - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd (q0, n1, n2, n1, d1); - umul_ppmm (m1, m0, q0, d0); - - if (m1 > n1 || (m1 == n1 && m0 > n0)) - { - q0--; - sub_ddmmss (m1, m0, m1, m0, d1, d0); - } - - q1 = 0; - - /* Remainder in (n1n0 - m1m0) >> bm. */ - sub_ddmmss (n1, n0, n1, n0, m1, m0); - r0 = (n1 << b) | (n0 >> bm); - r1 = n1 >> bm; - } - } - } - - q[0] = q0; q[1] = q1; - r[0] = r0, r[1] = r1; -} diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c index 3d79ce281b6..e0152a9b26e 100644 --- a/arch/ppc/mm/44x_mmu.c +++ b/arch/ppc/mm/44x_mmu.c @@ -104,7 +104,7 @@ unsigned long __init mmu_mapin_ram(void) /* Determine number of entries necessary to cover lowmem */ pinned_tlbs = (unsigned int) - (_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT); + (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT); /* Write upper watermark to save location */ tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs; @@ -112,7 +112,7 @@ unsigned long __init mmu_mapin_ram(void) /* If necessary, set additional pinned TLBs */ if (pinned_tlbs > 1) for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) { - unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE; + unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE; ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr); } diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c index ee5e9f25baf..8e08ca32531 100644 --- a/arch/ppc/mm/fault.c +++ b/arch/ppc/mm/fault.c @@ -1,6 +1,4 @@ /* - * arch/ppc/mm/fault.c - * * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * @@ -204,6 +202,7 @@ good_area: /* an exec - 4xx/Book-E allows for per-page execute permission */ } else if (TRAP(regs) == 0x400) { pte_t *ptep; + pmd_t *pmdp; #if 0 /* It would be nice to actually enforce the VM execute @@ -217,21 +216,24 @@ good_area: /* Since 4xx/Book-E supports per-page execute permission, * we lazily flush dcache to icache. */ ptep = NULL; - if (get_pteptr(mm, address, &ptep) && pte_present(*ptep)) { - struct page *page = pte_page(*ptep); - - if (! test_bit(PG_arch_1, &page->flags)) { - flush_dcache_icache_page(page); - set_bit(PG_arch_1, &page->flags); + if (get_pteptr(mm, address, &ptep, &pmdp)) { + spinlock_t *ptl = pte_lockptr(mm, pmdp); + spin_lock(ptl); + if (pte_present(*ptep)) { + struct page *page = pte_page(*ptep); + + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } + pte_update(ptep, 0, _PAGE_HWEXEC); + _tlbie(address); + pte_unmap_unlock(ptep, ptl); + up_read(&mm->mmap_sem); + return 0; } - pte_update(ptep, 0, _PAGE_HWEXEC); - _tlbie(address); - pte_unmap(ptep); - up_read(&mm->mmap_sem); - return 0; + pte_unmap_unlock(ptep, ptl); } - if (ptep != NULL) - pte_unmap(ptep); #endif /* a read */ } else { diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S index 3ec87c91343..31d0a924317 100644 --- a/arch/ppc/mm/hashtable.S +++ b/arch/ppc/mm/hashtable.S @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/hashtable.S - * * $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $ * * PowerPC version @@ -76,12 +74,6 @@ _GLOBAL(hash_page_sync) */ .text _GLOBAL(hash_page) -#ifdef CONFIG_PPC64BRIDGE - mfmsr r0 - clrldi r0,r0,1 /* make sure it's in 32-bit mode */ - MTMSRD(r0) - isync -#endif tophys(r7,0) /* gets -KERNELBASE into r7 */ #ifdef CONFIG_SMP addis r8,r7,mmu_hash_lock@h @@ -305,7 +297,6 @@ Hash_base = 0xc0180000 Hash_bits = 12 /* e.g. 256kB hash table */ Hash_msk = (((1 << Hash_bits) - 1) * 64) -#ifndef CONFIG_PPC64BRIDGE /* defines for the PTE format for 32-bit PPCs */ #define PTE_SIZE 8 #define PTEG_SIZE 64 @@ -319,21 +310,6 @@ Hash_msk = (((1 << Hash_bits) - 1) * 64) #define SET_V(r) oris r,r,PTE_V@h #define CLR_V(r,t) rlwinm r,r,0,1,31 -#else -/* defines for the PTE format for 64-bit PPCs */ -#define PTE_SIZE 16 -#define PTEG_SIZE 128 -#define LG_PTEG_SIZE 7 -#define LDPTEu ldu -#define STPTE std -#define CMPPTE cmpd -#define PTE_H 2 -#define PTE_V 1 -#define TST_V(r) andi. r,r,PTE_V -#define SET_V(r) ori r,r,PTE_V -#define CLR_V(r,t) li t,PTE_V; andc r,r,t -#endif /* CONFIG_PPC64BRIDGE */ - #define HASH_LEFT 31-(LG_PTEG_SIZE+Hash_bits-1) #define HASH_RIGHT 31-LG_PTEG_SIZE @@ -351,14 +327,8 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT) /* Construct the high word of the PPC-style PTE (r5) */ -#ifndef CONFIG_PPC64BRIDGE rlwinm r5,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ rlwimi r5,r4,10,26,31 /* put in API (abbrev page index) */ -#else /* CONFIG_PPC64BRIDGE */ - clrlwi r3,r3,8 /* reduce vsid to 24 bits */ - sldi r5,r3,12 /* shift vsid into position */ - rlwimi r5,r4,16,20,24 /* put in API (abbrev page index) */ -#endif /* CONFIG_PPC64BRIDGE */ SET_V(r5) /* set V (valid) bit */ /* Get the address of the primary PTE group in the hash table (r3) */ @@ -542,14 +512,8 @@ _GLOBAL(flush_hash_pages) add r3,r3,r0 /* note code below trims to 24 bits */ /* Construct the high word of the PPC-style PTE (r11) */ -#ifndef CONFIG_PPC64BRIDGE rlwinm r11,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ rlwimi r11,r4,10,26,31 /* put in API (abbrev page index) */ -#else /* CONFIG_PPC64BRIDGE */ - clrlwi r3,r3,8 /* reduce vsid to 24 bits */ - sldi r11,r3,12 /* shift vsid into position */ - rlwimi r11,r4,16,20,24 /* put in API (abbrev page index) */ -#endif /* CONFIG_PPC64BRIDGE */ SET_V(r11) /* set V (valid) bit */ #ifdef CONFIG_SMP diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 134db5c0420..386e000bcb7 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -140,7 +140,7 @@ static void free_sec(unsigned long start, unsigned long end, const char *name) while (start < end) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); cnt++; start += PAGE_SIZE; @@ -172,7 +172,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) for (; start < end; start += PAGE_SIZE) { ClearPageReserved(virt_to_page(start)); - set_page_count(virt_to_page(start), 1); + init_page_count(virt_to_page(start)); free_page(start); totalram_pages++; } @@ -412,14 +412,6 @@ void __init mem_init(void) } #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_OF - /* mark the RTAS pages as reserved */ - if ( rtas_data ) - for (addr = (ulong)__va(rtas_data); - addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ; - addr += PAGE_SIZE) - SetPageReserved(virt_to_page(addr)); -#endif for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory; addr += PAGE_SIZE) { if (!PageReserved(virt_to_page(addr))) @@ -441,7 +433,7 @@ void __init mem_init(void) struct page *page = mem_map + pfn; ClearPageReserved(page); - set_page_count(page, 1); + init_page_count(page); __free_page(page); totalhigh_pages++; } @@ -494,11 +486,6 @@ set_phys_avail(unsigned long total_memory) initrd_end - initrd_start, 1); } #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_OF - /* remove the RTAS pages from the available memory */ - if (rtas_data) - mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1); -#endif } /* Mark some memory as reserved by removing it from phys_avail. */ diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c index a8816e0f6a8..b4a4b3f02a1 100644 --- a/arch/ppc/mm/mmu_context.c +++ b/arch/ppc/mm/mmu_context.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and POWER3 implementations but excludes the 8xx and 4xx. + * 8260, and 83xx implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 6ea9185fd12..706bca8eb14 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -39,7 +39,7 @@ unsigned long ioremap_base; unsigned long ioremap_bot; int io_bat_index; -#if defined(CONFIG_6xx) || defined(CONFIG_POWER3) +#if defined(CONFIG_6xx) #define HAVE_BATS 1 #endif @@ -368,7 +368,7 @@ void __init io_block_mapping(unsigned long virt, phys_addr_t phys, * the PTE pointer is unmodified if PTE is not found. */ int -get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep) +get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp) { pgd_t *pgd; pmd_t *pmd; @@ -383,6 +383,8 @@ get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep) if (pte) { retval = 1; *ptep = pte; + if (pmdp) + *pmdp = pmd; /* XXX caller needs to do pte_unmap, yuck */ } } @@ -420,7 +422,7 @@ unsigned long iopa(unsigned long addr) mm = &init_mm; pa = 0; - if (get_pteptr(mm, addr, &pte)) { + if (get_pteptr(mm, addr, &pte, NULL)) { pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK); pte_unmap(pte); } diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c index 9a381ed5eb2..25bb6f3347c 100644 --- a/arch/ppc/mm/ppc_mmu.c +++ b/arch/ppc/mm/ppc_mmu.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and POWER3 implementations but excludes the 8xx and 4xx. + * 8260, and 83xx implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: @@ -42,11 +42,7 @@ unsigned long _SDR1; union ubat { /* BAT register values to be loaded */ BAT bat; -#ifdef CONFIG_PPC64BRIDGE - u64 word[2]; -#else u32 word[2]; -#endif } BATS[4][2]; /* 4 pairs of IBAT, DBAT */ struct batrange { /* stores address ranges mapped by BATs */ @@ -83,9 +79,6 @@ unsigned long p_mapped_by_bats(unsigned long pa) unsigned long __init mmu_mapin_ram(void) { -#ifdef CONFIG_POWER4 - return 0; -#else unsigned long tot, bl, done; unsigned long max_size = (256<<20); unsigned long align; @@ -122,7 +115,6 @@ unsigned long __init mmu_mapin_ram(void) } return done; -#endif } /* @@ -205,27 +197,10 @@ void __init MMU_init_hw(void) if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105); -#ifdef CONFIG_PPC64BRIDGE -#define LG_HPTEG_SIZE 7 /* 128 bytes per HPTEG */ -#define SDR1_LOW_BITS (lg_n_hpteg - 11) -#define MIN_N_HPTEG 2048 /* min 256kB hash table */ -#else #define LG_HPTEG_SIZE 6 /* 64 bytes per HPTEG */ #define SDR1_LOW_BITS ((n_hpteg - 1) >> 10) #define MIN_N_HPTEG 1024 /* min 64kB hash table */ -#endif - -#ifdef CONFIG_POWER4 - /* The hash table has already been allocated and initialized - in prom.c */ - n_hpteg = Hash_size >> LG_HPTEG_SIZE; - lg_n_hpteg = __ilog2(n_hpteg); - - /* Remove the hash table from the available memory */ - if (Hash) - reserve_phys_mem(__pa(Hash), Hash_size); -#else /* CONFIG_POWER4 */ /* * Allow 1 HPTE (1/8 HPTEG) for each page of memory. * This is less than the recommended amount, but then @@ -248,7 +223,6 @@ void __init MMU_init_hw(void) Hash = mem_pieces_find(Hash_size, Hash_size); cacheable_memzero(Hash, Hash_size); _SDR1 = __pa(Hash) | SDR1_LOW_BITS; -#endif /* CONFIG_POWER4 */ Hash_end = (PTE *) ((unsigned long)Hash + Hash_size); diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index d8837911bbc..174ddbc9758 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -57,6 +57,10 @@ config XILINX_ML300 help This option enables support for the Xilinx ML300 evaluation board. +config XILINX_ML403 + bool "Xilinx-ML403" + help + This option enables support for the Xilinx ML403 evaluation board. endchoice choice @@ -172,11 +176,6 @@ config IBM_OCP depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT default y -config XILINX_OCP - bool - depends on XILINX_ML300 - default y - config IBM_EMAC4 bool depends on 440GX || 440SP || 440SPE @@ -208,11 +207,21 @@ config 405GPR depends on SYCAMORE default y -config VIRTEX_II_PRO +config XILINX_VIRTEX_II_PRO bool depends on XILINX_ML300 default y +config XILINX_VIRTEX_4_FX + bool + depends on XILINX_ML403 + default y + +config XILINX_VIRTEX + bool + depends on XILINX_VIRTEX_II_PRO || XILINX_VIRTEX_4_FX + default y + config STB03xxx bool depends on REDWOOD_5 || REDWOOD_6 @@ -220,7 +229,7 @@ config STB03xxx config EMBEDDEDBOOT bool - depends on EP405 || XILINX_ML300 + depends on EP405 || XILINX_ML300 || XILINX_ML403 default y config IBM_OPENBIOS diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index c9bb6117095..a04a0d0a0f5 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_REDWOOD_6) += redwood6.o obj-$(CONFIG_SYCAMORE) += sycamore.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_ML300) += xilinx_ml300.o +obj-$(CONFIG_XILINX_ML403) += xilinx_ml403.o obj-$(CONFIG_405GP) += ibm405gp.o obj-$(CONFIG_REDWOOD_5) += ibmstb4.o @@ -26,4 +27,5 @@ obj-$(CONFIG_440SP) += ibm440sp.o obj-$(CONFIG_440SPE) += ppc440spe.o obj-$(CONFIG_405EP) += ibm405ep.o obj-$(CONFIG_405GPR) += ibm405gpr.o -obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o +obj-$(CONFIG_XILINX_VIRTEX) += virtex.o + diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c index 0ec53f04933..b940cfd646c 100644 --- a/arch/ppc/platforms/4xx/bamboo.c +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/bamboo.c - * * Bamboo board specific routines * * Wade Farnsworth <wfarnsworth@mvista.com> diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h index 5c019282649..31c0dd6a26c 100644 --- a/arch/ppc/platforms/4xx/bamboo.h +++ b/arch/ppc/platforms/4xx/bamboo.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/bamboo.h - * * Bamboo board definitions * * Wade Farnsworth <wfarnsworth@mvista.com> diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h index b5380cfaf5c..606aa9fa5ca 100644 --- a/arch/ppc/platforms/4xx/bubinga.h +++ b/arch/ppc/platforms/4xx/bubinga.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/bubinga.h - * * Bubinga board definitions * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/4xx/cpci405.c b/arch/ppc/platforms/4xx/cpci405.c index ff966773a0b..6571e39fbe4 100644 --- a/arch/ppc/platforms/4xx/cpci405.c +++ b/arch/ppc/platforms/4xx/cpci405.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/cpci405.c - * * Board setup routines for the esd CPCI-405 cPCI Board. * * Author: Stefan Roese diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 9a828b62341..b4ecb9c7985 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ebony.c - * * Ebony board specific routines * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index b91ad4272df..27b2e77c7c8 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ebony.h - * * Ebony board definitions * * Matt Porter <mporter@mvista.com> diff --git a/arch/ppc/platforms/4xx/ep405.c b/arch/ppc/platforms/4xx/ep405.c index 26a07cdb30e..6efa91ff9c0 100644 --- a/arch/ppc/platforms/4xx/ep405.c +++ b/arch/ppc/platforms/4xx/ep405.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ep405.c - * * Embedded Planet 405GP board * http://www.embeddedplanet.com * diff --git a/arch/ppc/platforms/4xx/ep405.h b/arch/ppc/platforms/4xx/ep405.h index ea3eb21338f..9814fc43172 100644 --- a/arch/ppc/platforms/4xx/ep405.h +++ b/arch/ppc/platforms/4xx/ep405.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ep405.h - * * Embedded Planet 405GP board * http://www.embeddedplanet.com * diff --git a/arch/ppc/platforms/4xx/ibm405ep.c b/arch/ppc/platforms/4xx/ibm405ep.c index 093b28d27a4..55af769a6e7 100644 --- a/arch/ppc/platforms/4xx/ibm405ep.c +++ b/arch/ppc/platforms/4xx/ibm405ep.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ibm405ep.c - * * Support for IBM PPC 405EP processors. * * Author: SAW (IBM), derived from ibmnp405l.c. diff --git a/arch/ppc/platforms/4xx/ibm405ep.h b/arch/ppc/platforms/4xx/ibm405ep.h index e051e3fe8c6..fe46640de15 100644 --- a/arch/ppc/platforms/4xx/ibm405ep.h +++ b/arch/ppc/platforms/4xx/ibm405ep.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm405ep.h - * * IBM PPC 405EP processor defines. * * Author: SAW (IBM), derived from ibm405gp.h. diff --git a/arch/ppc/platforms/4xx/ibm405gp.h b/arch/ppc/platforms/4xx/ibm405gp.h index b2b642e81af..eaf0ef57028 100644 --- a/arch/ppc/platforms/4xx/ibm405gp.h +++ b/arch/ppc/platforms/4xx/ibm405gp.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm405gp.h - * * Author: Armin Kuster akuster@mvista.com * * 2001 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibm405gpr.c b/arch/ppc/platforms/4xx/ibm405gpr.c index cd0d00d8e8e..49da61f6854 100644 --- a/arch/ppc/platforms/4xx/ibm405gpr.c +++ b/arch/ppc/platforms/4xx/ibm405gpr.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm405gpr.c - * * Author: Armin Kuster <akuster@mvista.com> * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibm405gpr.h b/arch/ppc/platforms/4xx/ibm405gpr.h index 45412fb4368..e90c5dde01d 100644 --- a/arch/ppc/platforms/4xx/ibm405gpr.h +++ b/arch/ppc/platforms/4xx/ibm405gpr.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm405gpr.h - * * Author: Armin Kuster <akuster@mvista.com> * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c index 65ac0b9c2d0..1fed6638c81 100644 --- a/arch/ppc/platforms/4xx/ibm440ep.c +++ b/arch/ppc/platforms/4xx/ibm440ep.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440ep.c - * * PPC440EP I/O descriptions * * Wade Farnsworth <wfarnsworth@mvista.com> diff --git a/arch/ppc/platforms/4xx/ibm440ep.h b/arch/ppc/platforms/4xx/ibm440ep.h index 97c80b8e3e1..61717e8a799 100644 --- a/arch/ppc/platforms/4xx/ibm440ep.h +++ b/arch/ppc/platforms/4xx/ibm440ep.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440ep.h - * * PPC440EP definitions * * Wade Farnsworth <wfarnsworth@mvista.com> diff --git a/arch/ppc/platforms/4xx/ibm440gp.c b/arch/ppc/platforms/4xx/ibm440gp.c index d926245e8b3..b67a72e5c6f 100644 --- a/arch/ppc/platforms/4xx/ibm440gp.c +++ b/arch/ppc/platforms/4xx/ibm440gp.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440gp.c - * * PPC440GP I/O descriptions * * Matt Porter <mporter@mvista.com> diff --git a/arch/ppc/platforms/4xx/ibm440gp.h b/arch/ppc/platforms/4xx/ibm440gp.h index ae1efc03b29..7b2763b6024 100644 --- a/arch/ppc/platforms/4xx/ibm440gp.h +++ b/arch/ppc/platforms/4xx/ibm440gp.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440gp.h - * * PPC440GP definitions * * Roland Dreier <roland@digitalvampire.org> diff --git a/arch/ppc/platforms/4xx/ibm440gx.c b/arch/ppc/platforms/4xx/ibm440gx.c index d24c09ee7b1..685abffcb6c 100644 --- a/arch/ppc/platforms/4xx/ibm440gx.c +++ b/arch/ppc/platforms/4xx/ibm440gx.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440gx.c - * * PPC440GX I/O descriptions * * Matt Porter <mporter@mvista.com> diff --git a/arch/ppc/platforms/4xx/ibm440gx.h b/arch/ppc/platforms/4xx/ibm440gx.h index 0b59d8dcd03..070a34efe1c 100644 --- a/arch/ppc/platforms/4xx/ibm440gx.h +++ b/arch/ppc/platforms/4xx/ibm440gx.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ibm440gx.h - * * PPC440GX definitions * * Matt Porter <mporter@mvista.com> diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c index 71a0117d359..de8f7ac5623 100644 --- a/arch/ppc/platforms/4xx/ibm440sp.c +++ b/arch/ppc/platforms/4xx/ibm440sp.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440sp.c - * * PPC440SP I/O descriptions * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/platforms/4xx/ibm440sp.h b/arch/ppc/platforms/4xx/ibm440sp.h index c71e46a18b9..77e8bb22c52 100644 --- a/arch/ppc/platforms/4xx/ibm440sp.h +++ b/arch/ppc/platforms/4xx/ibm440sp.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440sp.h - * * PPC440SP definitions * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c index a477a78f490..f1dcb0ac15b 100644 --- a/arch/ppc/platforms/4xx/ibmnp405h.c +++ b/arch/ppc/platforms/4xx/ibmnp405h.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmnp405h.c - * * Author: Armin Kuster <akuster@mvista.com> * * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h index e2c2b06128c..2c683f6aaa6 100644 --- a/arch/ppc/platforms/4xx/ibmnp405h.h +++ b/arch/ppc/platforms/4xx/ibmnp405h.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmnp405h.h - * * Author: Armin Kuster <akuster@mvista.com> * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmstb4.c b/arch/ppc/platforms/4xx/ibmstb4.c index 7e33bb63544..799a2eccccc 100644 --- a/arch/ppc/platforms/4xx/ibmstb4.c +++ b/arch/ppc/platforms/4xx/ibmstb4.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmstb4.c - * * Author: Armin Kuster <akuster@mvista.com> * * 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmstb4.h b/arch/ppc/platforms/4xx/ibmstb4.h index 9f21d4c88a3..9de42659735 100644 --- a/arch/ppc/platforms/4xx/ibmstb4.h +++ b/arch/ppc/platforms/4xx/ibmstb4.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmstb4.h - * * Author: Armin Kuster <akuster@mvista.com> * * 2001 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmstbx25.c b/arch/ppc/platforms/4xx/ibmstbx25.c index b895b9cca57..090ddcbecc5 100644 --- a/arch/ppc/platforms/4xx/ibmstbx25.c +++ b/arch/ppc/platforms/4xx/ibmstbx25.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmstbx25.c - * * Author: Armin Kuster <akuster@mvista.com> * * 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/ibmstbx25.h b/arch/ppc/platforms/4xx/ibmstbx25.h index 9a2efc366e9..6884a49d348 100644 --- a/arch/ppc/platforms/4xx/ibmstbx25.h +++ b/arch/ppc/platforms/4xx/ibmstbx25.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibmstbx25.h - * * Author: Armin Kuster <akuster@mvista.com> * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c index 21d29132aeb..5c37de28e13 100644 --- a/arch/ppc/platforms/4xx/luan.c +++ b/arch/ppc/platforms/4xx/luan.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/luan.c - * * Luan board specific routines * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/platforms/4xx/luan.h b/arch/ppc/platforms/4xx/luan.h index bbe7d0766db..e0db6a810fe 100644 --- a/arch/ppc/platforms/4xx/luan.h +++ b/arch/ppc/platforms/4xx/luan.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/luan.h - * * Luan board definitions * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 4f355b6acab..f841972f1fa 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ocotea.c - * * Ocotea board specific routines * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h index 33251153ac5..7c799a9ff82 100644 --- a/arch/ppc/platforms/4xx/ocotea.h +++ b/arch/ppc/platforms/4xx/ocotea.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ocotea.h - * * Ocotea board definitions * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c index 6139a0b3393..1be5d1c8e26 100644 --- a/arch/ppc/platforms/4xx/ppc440spe.c +++ b/arch/ppc/platforms/4xx/ppc440spe.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ppc440spe.c - * * PPC440SPe I/O descriptions * * Roland Dreier <rolandd@cisco.com> diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h index 2216846973b..d3a620ddcde 100644 --- a/arch/ppc/platforms/4xx/ppc440spe.h +++ b/arch/ppc/platforms/4xx/ppc440spe.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/ibm440spe.h - * * PPC440SPe definitions * * Roland Dreier <rolandd@cisco.com> diff --git a/arch/ppc/platforms/4xx/redwood5.c b/arch/ppc/platforms/4xx/redwood5.c index 611ac861804..53da2b4f7c2 100644 --- a/arch/ppc/platforms/4xx/redwood5.c +++ b/arch/ppc/platforms/4xx/redwood5.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/redwood5.c - * * Support for the IBM redwood5 eval board file * * Author: Armin Kuster <akuster@mvista.com> diff --git a/arch/ppc/platforms/4xx/redwood5.h b/arch/ppc/platforms/4xx/redwood5.h index 264e34fb3fb..49edd481897 100644 --- a/arch/ppc/platforms/4xx/redwood5.h +++ b/arch/ppc/platforms/4xx/redwood5.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/redwood5.h - * * Macros, definitions, and data structures specific to the IBM PowerPC * STB03xxx "Redwood" evaluation board. * diff --git a/arch/ppc/platforms/4xx/redwood6.c b/arch/ppc/platforms/4xx/redwood6.c index b1311669128..41b27d106fa 100644 --- a/arch/ppc/platforms/4xx/redwood6.c +++ b/arch/ppc/platforms/4xx/redwood6.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/redwood6.c - * * Author: Armin Kuster <akuster@mvista.com> * * 2002 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/4xx/redwood6.h b/arch/ppc/platforms/4xx/redwood6.h index 1814b9f5fc3..1edcbe5c51c 100644 --- a/arch/ppc/platforms/4xx/redwood6.h +++ b/arch/ppc/platforms/4xx/redwood6.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/redwood6.h - * * Macros, definitions, and data structures specific to the IBM PowerPC * STBx25xx "Redwood6" evaluation board. * diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c index 281b4a2ffb9..bab31eb3068 100644 --- a/arch/ppc/platforms/4xx/sycamore.c +++ b/arch/ppc/platforms/4xx/sycamore.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/sycamore.c - * * Architecture- / platform-specific boot-time initialization code for * IBM PowerPC 4xx based boards. * diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h index 1cd6c824fd6..dae01620227 100644 --- a/arch/ppc/platforms/4xx/sycamore.h +++ b/arch/ppc/platforms/4xx/sycamore.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/sycamore.h - * * Sycamore board definitions * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.c b/arch/ppc/platforms/4xx/virtex-ii_pro.c deleted file mode 100644 index 097cc9d5aca..00000000000 --- a/arch/ppc/platforms/4xx/virtex-ii_pro.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/ppc/platforms/4xx/virtex-ii_pro.c - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <asm/ocp.h> -#include "virtex-ii_pro.h" - -/* Have OCP take care of the serial ports. */ -struct ocp_def core_ocp[] = { -#ifdef XPAR_UARTNS550_0_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 0, - .paddr = XPAR_UARTNS550_0_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, - .pm = OCP_CPM_NA - }, -#ifdef XPAR_UARTNS550_1_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 1, - .paddr = XPAR_UARTNS550_1_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID, - .pm = OCP_CPM_NA - }, -#ifdef XPAR_UARTNS550_2_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 2, - .paddr = XPAR_UARTNS550_2_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID, - .pm = OCP_CPM_NA - }, -#ifdef XPAR_UARTNS550_3_BASEADDR - { .vendor = OCP_VENDOR_XILINX, - .function = OCP_FUNC_16550, - .index = 3, - .paddr = XPAR_UARTNS550_3_BASEADDR, - .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID, - .pm = OCP_CPM_NA - }, -#ifdef XPAR_UARTNS550_4_BASEADDR -#error Edit this file to add more devices. -#endif /* 4 */ -#endif /* 3 */ -#endif /* 2 */ -#endif /* 1 */ -#endif /* 0 */ - { .vendor = OCP_VENDOR_INVALID - } -}; diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.h b/arch/ppc/platforms/4xx/virtex-ii_pro.h deleted file mode 100644 index 9014c488733..00000000000 --- a/arch/ppc/platforms/4xx/virtex-ii_pro.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/ppc/platforms/4xx/virtex-ii_pro.h - * - * Include file that defines the Xilinx Virtex-II Pro processor - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_VIRTEXIIPRO_H__ -#define __ASM_VIRTEXIIPRO_H__ - -#include <linux/config.h> -#include <asm/xparameters.h> - -/* serial defines */ - -#define RS_TABLE_SIZE 4 /* change this and add more devices below - if you have more then 4 16x50 UARTs */ - -#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16) - -/* The serial ports in the Virtex-II Pro have each I/O byte in the - * LSByte of a word. This means that iomem_reg_shift needs to be 2 to - * change the byte offsets into word offsets. In addition the base - * addresses need to have 3 added to them to get to the LSByte. - */ -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ - ASYNC_BOOT_AUTOCONF, \ - .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM}, - -#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define ML300_UART0 STD_UART_OP(0) -#else -#define ML300_UART0 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define ML300_UART1 STD_UART_OP(1) -#else -#define ML300_UART1 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define ML300_UART2 STD_UART_OP(2) -#else -#define ML300_UART2 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define ML300_UART3 STD_UART_OP(3) -#else -#define ML300_UART3 -#endif - -#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID) -#error Edit this file to add more devices. -#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID) -#define NR_SER_PORTS 4 -#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID) -#define NR_SER_PORTS 3 -#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID) -#define NR_SER_PORTS 2 -#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID) -#define NR_SER_PORTS 1 -#else -#define NR_SER_PORTS 0 -#endif - -#if defined(CONFIG_UART0_TTYS0) -#define SERIAL_PORT_DFNS \ - ML300_UART0 \ - ML300_UART1 \ - ML300_UART2 \ - ML300_UART3 -#endif - -#if defined(CONFIG_UART0_TTYS1) -#define SERIAL_PORT_DFNS \ - ML300_UART1 \ - ML300_UART0 \ - ML300_UART2 \ - ML300_UART3 -#endif - -#define DCRN_CPMFR_BASE 0 - -#include <asm/ibm405.h> - -#endif /* __ASM_VIRTEXIIPRO_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c new file mode 100644 index 00000000000..133a8314719 --- /dev/null +++ b/arch/ppc/platforms/4xx/virtex.c @@ -0,0 +1,56 @@ +/* + * Virtex-II Pro & Virtex-4 FX common infrastructure + * + * Maintainer: Grant Likely <grant.likely@secretlab.ca> + * + * Copyright 2005 Secret Lab Technologies Ltd. + * Copyright 2005 General Dynamics Canada Ltd. + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/serial_8250.h> +#include <asm/ppc_sys.h> +#include <platforms/4xx/virtex.h> +#include <platforms/4xx/xparameters/xparameters.h> + +#define XPAR_UART(num) { \ + .mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \ + .irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ + .iotype = UPIO_MEM, \ + .uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \ + .flags = UPF_BOOT_AUTOCONF, \ + .regshift = 2, \ + } + +struct plat_serial8250_port serial_platform_data[] = { +#ifdef XPAR_UARTNS550_0_BASEADDR + XPAR_UART(0), +#endif +#ifdef XPAR_UARTNS550_1_BASEADDR + XPAR_UART(1), +#endif +#ifdef XPAR_UARTNS550_2_BASEADDR + XPAR_UART(2), +#endif +#ifdef XPAR_UARTNS550_3_BASEADDR + XPAR_UART(3), +#endif + { }, /* terminated by empty record */ +}; + +struct platform_device ppc_sys_platform_devices[] = { + [VIRTEX_UART] = { + .name = "serial8250", + .id = 0, + .dev.platform_data = serial_platform_data, + }, +}; + diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h new file mode 100644 index 00000000000..c14325dfd7b --- /dev/null +++ b/arch/ppc/platforms/4xx/virtex.h @@ -0,0 +1,35 @@ +/* + * arch/ppc/platforms/4xx/virtex.h + * + * Include file that defines the Xilinx Virtex-II Pro processor + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_VIRTEX_H__ +#define __ASM_VIRTEX_H__ + +/* serial defines */ + +#include <asm/ibm405.h> + +/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */ +#if !defined(BASE_BAUD) + #define BASE_BAUD (0) /* dummy value; not used */ +#endif + +/* Device type enumeration for platform bus definitions */ +#ifndef __ASSEMBLY__ +enum ppc_sys_devices { + VIRTEX_UART, NUM_PPC_SYS_DEVS, +}; +#endif + +#endif /* __ASM_VIRTEX_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c index 74cb33182d9..6bd77902b9a 100644 --- a/arch/ppc/platforms/4xx/walnut.c +++ b/arch/ppc/platforms/4xx/walnut.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/walnut.c - * * Architecture- / platform-specific boot-time initialization code for * IBM PowerPC 4xx based boards. Adapted from original * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h index dcf2691698c..f13a577f0a4 100644 --- a/arch/ppc/platforms/4xx/walnut.h +++ b/arch/ppc/platforms/4xx/walnut.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/walnut.h - * * Walnut board definitions * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c index e90d97f64f7..d97a7f269f9 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.c +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/xilinx_ml300.c - * * Xilinx ML300 evaluation board initialization * * Author: MontaVista Software, Inc. @@ -17,12 +15,14 @@ #include <linux/tty.h> #include <linux/serial.h> #include <linux/serial_core.h> +#include <linux/serial_8250.h> #include <linux/serialP.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/ocp.h> +#include <asm/ppc_sys.h> -#include <platforms/4xx/virtex-ii_pro.h> /* for NR_SER_PORTS */ +#include <syslib/gen550.h> +#include <platforms/4xx/xparameters/xparameters.h> /* * As an overview of how the following functions (platform_init, @@ -54,6 +54,22 @@ * ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c */ +/* Board specifications structures */ +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + { + /* Only one entry, always assume the same design */ + .ppc_sys_name = "Xilinx ML300 Reference Design", + .mask = 0x00000000, + .value = 0x00000000, + .num_devices = 1, + .device_list = (enum ppc_sys_devices[]) + { + VIRTEX_UART, + }, + }, +}; + #if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) static volatile unsigned *powerdown_base = @@ -80,28 +96,39 @@ ml300_map_io(void) #endif } +/* Early serial support functions */ static void __init +ml300_early_serial_init(int num, struct plat_serial8250_port *pdata) +{ +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + struct uart_port serial_req; + + memset(&serial_req, 0, sizeof(serial_req)); + serial_req.mapbase = pdata->mapbase; + serial_req.membase = pdata->membase; + serial_req.irq = pdata->irq; + serial_req.uartclk = pdata->uartclk; + serial_req.regshift = pdata->regshift; + serial_req.iotype = pdata->iotype; + serial_req.flags = pdata->flags; + gen550_init(num, &serial_req); +#endif +} + +void __init ml300_early_serial_map(void) { #ifdef CONFIG_SERIAL_8250 - struct serial_state old_ports[] = { SERIAL_PORT_DFNS }; - struct uart_port port; - int i; - - /* Setup ioremapped serial port access */ - for (i = 0; i < ARRAY_SIZE(old_ports); i++ ) { - memset(&port, 0, sizeof(port)); - port.membase = ioremap((phys_addr_t)(old_ports[i].iomem_base), 16); - port.irq = old_ports[i].irq; - port.uartclk = old_ports[i].baud_base * 16; - port.regshift = old_ports[i].iomem_reg_shift; - port.iotype = UPIO_MEM; - port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - port.line = i; - - if (early_serial_setup(&port) != 0) { - printk("Early serial init of port %d failed\n", i); - } + struct plat_serial8250_port *pdata; + int i = 0; + + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART); + while(pdata && pdata->flags) + { + pdata->membase = ioremap(pdata->mapbase, 0x100); + ml300_early_serial_init(i, pdata); + pdata++; + i++; } #endif /* CONFIG_SERIAL_8250 */ } @@ -109,9 +136,8 @@ ml300_early_serial_map(void) void __init ml300_setup_arch(void) { - ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */ - ml300_early_serial_map(); + ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */ /* Identify the system */ printk(KERN_INFO "Xilinx Virtex-II Pro port\n"); @@ -131,6 +157,8 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, { ppc4xx_init(r3, r4, r5, r6, r7); + identify_ppc_sys_by_id(mfspr(SPRN_PVR)); + ppc_md.setup_arch = ml300_setup_arch; ppc_md.setup_io_mappings = ml300_map_io; ppc_md.init_IRQ = ml300_init_irq; diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h index f8c58841233..3d57332ba82 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.h +++ b/arch/ppc/platforms/4xx/xilinx_ml300.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/xilinx_ml300.h - * * Include file that defines the Xilinx ML300 evaluation board * * Author: MontaVista Software, Inc. @@ -16,7 +14,7 @@ #define __ASM_XILINX_ML300_H__ /* ML300 has a Xilinx Virtex-II Pro processor */ -#include <platforms/4xx/virtex-ii_pro.h> +#include <platforms/4xx/virtex.h> #ifndef __ASSEMBLY__ @@ -41,7 +39,7 @@ typedef struct board_info { #define PPC4xx_ONB_IO_VADDR 0u #define PPC4xx_ONB_IO_SIZE 0u -#define PPC4xx_MACHINE_NAME "Xilinx ML300" +#define PPC4xx_MACHINE_NAME "Xilinx ML300 Reference System" #endif /* __ASM_XILINX_ML300_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.c b/arch/ppc/platforms/4xx/xilinx_ml403.c new file mode 100644 index 00000000000..4c0c7e4c111 --- /dev/null +++ b/arch/ppc/platforms/4xx/xilinx_ml403.c @@ -0,0 +1,177 @@ +/* + * arch/ppc/platforms/4xx/xilinx_ml403.c + * + * Xilinx ML403 evaluation board initialization + * + * Author: Grant Likely <grant.likely@secretlab.ca> + * + * 2005 (c) Secret Lab Technologies Ltd. + * 2002-2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/serial_8250.h> +#include <linux/serialP.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ppc_sys.h> + +#include <syslib/gen550.h> +#include <platforms/4xx/xparameters/xparameters.h> + +/* + * As an overview of how the following functions (platform_init, + * ml403_map_io, ml403_setup_arch and ml403_init_IRQ) fit into the + * kernel startup procedure, here's a call tree: + * + * start_here arch/ppc/kernel/head_4xx.S + * early_init arch/ppc/kernel/setup.c + * machine_init arch/ppc/kernel/setup.c + * platform_init this file + * ppc4xx_init arch/ppc/syslib/ppc4xx_setup.c + * parse_bootinfo + * find_bootinfo + * "setup some default ppc_md pointers" + * MMU_init arch/ppc/mm/init.c + * *ppc_md.setup_io_mappings == ml403_map_io this file + * ppc4xx_map_io arch/ppc/syslib/ppc4xx_setup.c + * start_kernel init/main.c + * setup_arch arch/ppc/kernel/setup.c + * #if defined(CONFIG_KGDB) + * *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc + * #endif + * *ppc_md.setup_arch == ml403_setup_arch this file + * ppc4xx_setup_arch arch/ppc/syslib/ppc4xx_setup.c + * ppc4xx_find_bridges arch/ppc/syslib/ppc405_pci.c + * init_IRQ arch/ppc/kernel/irq.c + * *ppc_md.init_IRQ == ml403_init_IRQ this file + * ppc4xx_init_IRQ arch/ppc/syslib/ppc4xx_setup.c + * ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c + */ + +/* Board specifications structures */ +struct ppc_sys_spec *cur_ppc_sys_spec; +struct ppc_sys_spec ppc_sys_specs[] = { + { + /* Only one entry, always assume the same design */ + .ppc_sys_name = "Xilinx ML403 Reference Design", + .mask = 0x00000000, + .value = 0x00000000, + .num_devices = 1, + .device_list = (enum ppc_sys_devices[]) + { + VIRTEX_UART, + }, + }, +}; + +#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) + +static volatile unsigned *powerdown_base = + (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR; + +static void +xilinx_power_off(void) +{ + local_irq_disable(); + out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE); + while (1) ; +} +#endif + +void __init +ml403_map_io(void) +{ + ppc4xx_map_io(); + +#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) + powerdown_base = ioremap((unsigned long) powerdown_base, + XPAR_POWER_0_POWERDOWN_HIGHADDR - + XPAR_POWER_0_POWERDOWN_BASEADDR + 1); +#endif +} + +/* Early serial support functions */ +static void __init +ml403_early_serial_init(int num, struct plat_serial8250_port *pdata) +{ +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + struct uart_port serial_req; + + memset(&serial_req, 0, sizeof(serial_req)); + serial_req.mapbase = pdata->mapbase; + serial_req.membase = pdata->membase; + serial_req.irq = pdata->irq; + serial_req.uartclk = pdata->uartclk; + serial_req.regshift = pdata->regshift; + serial_req.iotype = pdata->iotype; + serial_req.flags = pdata->flags; + gen550_init(num, &serial_req); +#endif +} + +void __init +ml403_early_serial_map(void) +{ +#ifdef CONFIG_SERIAL_8250 + struct plat_serial8250_port *pdata; + int i = 0; + + pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART); + while(pdata && pdata->flags) + { + pdata->membase = ioremap(pdata->mapbase, 0x100); + ml403_early_serial_init(i, pdata); + pdata++; + i++; + } +#endif /* CONFIG_SERIAL_8250 */ +} + +void __init +ml403_setup_arch(void) +{ + ml403_early_serial_map(); + ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */ + + /* Identify the system */ + printk(KERN_INFO "Xilinx ML403 Reference System (Virtex-4 FX)\n"); +} + +/* Called after board_setup_irq from ppc4xx_init_IRQ(). */ +void __init +ml403_init_irq(void) +{ + ppc4xx_init_IRQ(); +} + +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + ppc4xx_init(r3, r4, r5, r6, r7); + + identify_ppc_sys_by_id(mfspr(SPRN_PVR)); + + ppc_md.setup_arch = ml403_setup_arch; + ppc_md.setup_io_mappings = ml403_map_io; + ppc_md.init_IRQ = ml403_init_irq; + +#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) + ppc_md.power_off = xilinx_power_off; +#endif + +#ifdef CONFIG_KGDB + ppc_md.early_serial_map = ml403_early_serial_map; +#endif +} + diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.h b/arch/ppc/platforms/4xx/xilinx_ml403.h new file mode 100644 index 00000000000..47359695990 --- /dev/null +++ b/arch/ppc/platforms/4xx/xilinx_ml403.h @@ -0,0 +1,49 @@ +/* + * arch/ppc/platforms/4xx/xilinx_ml403.h + * + * Include file that defines the Xilinx ML403 reference design + * + * Author: Grant Likely <grant.likely@secretlab.ca> + * + * 2005 (c) Secret Lab Technologies Ltd. + * 2002-2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_XILINX_ML403_H__ +#define __ASM_XILINX_ML403_H__ + +/* ML403 has a Xilinx Virtex-4 FPGA with a PPC405 hard core */ +#include <platforms/4xx/virtex.h> + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> + +typedef struct board_info { + unsigned int bi_memsize; /* DRAM installed, in bytes */ + unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ + unsigned int bi_intfreq; /* Processor speed, in Hz */ + unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ +} bd_t; + +/* Some 4xx parts use a different timebase frequency from the internal clock. +*/ +#define bi_tbfreq bi_intfreq + +#endif /* !__ASSEMBLY__ */ + +/* We don't need anything mapped. Size of zero will accomplish that. */ +#define PPC4xx_ONB_IO_PADDR 0u +#define PPC4xx_ONB_IO_VADDR 0u +#define PPC4xx_ONB_IO_SIZE 0u + +#define PPC4xx_MACHINE_NAME "Xilinx ML403 Reference Design" + +#endif /* __ASM_XILINX_ML403_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h new file mode 100644 index 00000000000..4cf21f25635 --- /dev/null +++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h @@ -0,0 +1,37 @@ +/* + * include/asm-ppc/xparameters.h + * + * This file includes the correct xparameters.h for the CONFIG'ed board plus + * fixups to translate board specific XPAR values to a common set of names + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2004 (c) MontaVista Software, Inc. This file is licensed under the terms + * of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#include <linux/config.h> + +#if defined(CONFIG_XILINX_ML300) + #include "xparameters_ml300.h" +#elif defined(CONFIG_XILINX_ML403) + #include "xparameters_ml403.h" +#else + /* Add other board xparameter includes here before the #else */ + #error No xparameters_*.h file included +#endif + +#ifndef SERIAL_PORT_DFNS + /* zImage serial port definitions */ + #define RS_TABLE_SIZE 1 + #define SERIAL_PORT_DFNS { \ + .baud_base = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16, \ + .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, \ + .flags = ASYNC_BOOT_AUTOCONF, \ + .iomem_base = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3, \ + .iomem_reg_shift = 2, \ + .io_type = SERIAL_IO_MEM, \ + }, +#endif diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h new file mode 100644 index 00000000000..5cacdcb3964 --- /dev/null +++ b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h @@ -0,0 +1,243 @@ + +/******************************************************************* +* +* CAUTION: This file is automatically generated by libgen. +* Version: Xilinx EDK 7.1.2 EDK_H.12.5.1 +* DO NOT EDIT. +* +* Copyright (c) 2005 Xilinx, Inc. All rights reserved. +* +* Description: Driver parameters +* +*******************************************************************/ + +#define XPAR_PLB_BRAM_IF_CNTLR_0_BASEADDR 0xFFFF0000 +#define XPAR_PLB_BRAM_IF_CNTLR_0_HIGHADDR 0xFFFFFFFF + +/******************************************************************/ + +#define XPAR_OPB_EMC_0_MEM0_BASEADDR 0x20000000 +#define XPAR_OPB_EMC_0_MEM0_HIGHADDR 0x200FFFFF +#define XPAR_OPB_EMC_0_MEM1_BASEADDR 0x28000000 +#define XPAR_OPB_EMC_0_MEM1_HIGHADDR 0x287FFFFF +#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000 +#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF +#define XPAR_OPB_EMC_USB_0_MEM0_BASEADDR 0xA5000000 +#define XPAR_OPB_EMC_USB_0_MEM0_HIGHADDR 0xA50000FF +#define XPAR_PLB_DDR_0_MEM0_BASEADDR 0x00000000 +#define XPAR_PLB_DDR_0_MEM0_HIGHADDR 0x0FFFFFFF + +/******************************************************************/ + +#define XPAR_XEMAC_NUM_INSTANCES 1 +#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000 +#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF +#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 +#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 +#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 +#define XPAR_OPB_ETHERNET_0_MII_EXIST 1 + +/******************************************************************/ + +#define XPAR_XUARTNS550_NUM_INSTANCES 1 +#define XPAR_XUARTNS550_CLOCK_HZ 100000000 +#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000 +#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF +#define XPAR_OPB_UART16550_0_DEVICE_ID 0 + +/******************************************************************/ + +#define XPAR_XGPIO_NUM_INSTANCES 3 +#define XPAR_OPB_GPIO_0_BASEADDR 0x90000000 +#define XPAR_OPB_GPIO_0_HIGHADDR 0x900001FF +#define XPAR_OPB_GPIO_0_DEVICE_ID 0 +#define XPAR_OPB_GPIO_0_INTERRUPT_PRESENT 0 +#define XPAR_OPB_GPIO_0_IS_DUAL 1 +#define XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR 0x90001000 +#define XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR 0x900011FF +#define XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID 1 +#define XPAR_OPB_GPIO_EXP_HDR_0_INTERRUPT_PRESENT 0 +#define XPAR_OPB_GPIO_EXP_HDR_0_IS_DUAL 1 +#define XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR 0x90002000 +#define XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR 0x900021FF +#define XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID 2 +#define XPAR_OPB_GPIO_CHAR_LCD_0_INTERRUPT_PRESENT 0 +#define XPAR_OPB_GPIO_CHAR_LCD_0_IS_DUAL 0 + +/******************************************************************/ + +#define XPAR_XPS2_NUM_INSTANCES 2 +#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0 +#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000 +#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F) +#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1 +#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000) +#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F) + +/******************************************************************/ + +#define XPAR_XIIC_NUM_INSTANCES 1 +#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000 +#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF +#define XPAR_OPB_IIC_0_DEVICE_ID 0 +#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0 +#define XPAR_OPB_IIC_0_GPO_WIDTH 1 + +/******************************************************************/ + +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 10 +#define XPAR_XINTC_HAS_IPR 1 +#define XPAR_XINTC_USE_DCR 0 +#define XPAR_XINTC_NUM_INSTANCES 1 +#define XPAR_OPB_INTC_0_BASEADDR 0xD1000FC0 +#define XPAR_OPB_INTC_0_HIGHADDR 0xD1000FDF +#define XPAR_OPB_INTC_0_DEVICE_ID 0 +#define XPAR_OPB_INTC_0_KIND_OF_INTR 0x00000000 + +/******************************************************************/ + +#define XPAR_INTC_SINGLE_BASEADDR 0xD1000FC0 +#define XPAR_INTC_SINGLE_HIGHADDR 0xD1000FDF +#define XPAR_INTC_SINGLE_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID +#define XPAR_OPB_ETHERNET_0_IP2INTC_IRPT_MASK 0X000001 +#define XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 0 +#define XPAR_SYSTEM_USB_HPI_INT_MASK 0X000002 +#define XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR 1 +#define XPAR_MISC_LOGIC_0_PHY_MII_INT_MASK 0X000004 +#define XPAR_OPB_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 2 +#define XPAR_OPB_SYSACE_0_SYSACE_IRQ_MASK 0X000008 +#define XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 3 +#define XPAR_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_MASK 0X000010 +#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 4 +#define XPAR_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_MASK 0X000020 +#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 5 +#define XPAR_OPB_IIC_0_IP2INTC_IRPT_MASK 0X000040 +#define XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 6 +#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR2_MASK 0X000080 +#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 7 +#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR1_MASK 0X000100 +#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8 +#define XPAR_OPB_UART16550_0_IP2INTC_IRPT_MASK 0X000200 +#define XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 9 + +/******************************************************************/ + +#define XPAR_XTFT_NUM_INSTANCES 1 +#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200 +#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207 +#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0 + +/******************************************************************/ + +#define XPAR_XSYSACE_MEM_WIDTH 16 +#define XPAR_XSYSACE_NUM_INSTANCES 1 +#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000 +#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF +#define XPAR_OPB_SYSACE_0_DEVICE_ID 0 +#define XPAR_OPB_SYSACE_0_MEM_WIDTH 16 + +/******************************************************************/ + +#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000 + +/******************************************************************/ + + +/******************************************************************/ + +/* Linux Redefines */ + +/******************************************************************/ + +#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000) +#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR +#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ +#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_INTC_0_BASEADDR XPAR_OPB_INTC_0_BASEADDR +#define XPAR_INTC_0_HIGHADDR XPAR_OPB_INTC_0_HIGHADDR +#define XPAR_INTC_0_KIND_OF_INTR XPAR_OPB_INTC_0_KIND_OF_INTR +#define XPAR_INTC_0_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR +#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR +#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR +#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR +#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR +#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR + +/******************************************************************/ + +#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR + +/******************************************************************/ + +#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR +#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR +#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT +#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST +#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST +#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_GPIO_0_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_0 +#define XPAR_GPIO_0_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_0 +#define XPAR_GPIO_0_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_0 +#define XPAR_GPIO_1_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_1 +#define XPAR_GPIO_1_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_1 +#define XPAR_GPIO_1_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_1 +#define XPAR_GPIO_2_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_0 +#define XPAR_GPIO_2_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_0 +#define XPAR_GPIO_2_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_0 +#define XPAR_GPIO_3_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_1 +#define XPAR_GPIO_3_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_1 +#define XPAR_GPIO_3_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_1 +#define XPAR_GPIO_4_BASEADDR XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR +#define XPAR_GPIO_4_HIGHADDR XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR +#define XPAR_GPIO_4_DEVICE_ID XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 +#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 +#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 +#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 +#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 +#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 + +/******************************************************************/ + +#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR +#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR +#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR +#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR +#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR +#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID + +/******************************************************************/ + +#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 +#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ +#define XPAR_DDR_0_SIZE 0x4000000 + +/******************************************************************/ + +#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400 +#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF +#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0 + +/******************************************************************/ + +#define XPAR_PCI_0_CLOCK_FREQ_HZ 0 + +/******************************************************************/ + diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c index b065b8babcd..f287dcdbffc 100644 --- a/arch/ppc/platforms/4xx/yucca.c +++ b/arch/ppc/platforms/4xx/yucca.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/yucca.c - * * Yucca board specific routines * * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter) diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h index 01a4afea151..7ae23012237 100644 --- a/arch/ppc/platforms/4xx/yucca.h +++ b/arch/ppc/platforms/4xx/yucca.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/4xx/yucca.h - * * Yucca board definitions * * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter) diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c index 1a659bbc186..11626dd9090 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ b/arch/ppc/platforms/83xx/mpc834x_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/83xx/mpc834x_sys.c - * * MPC834x SYS board specific routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h index 2e514d316fb..6727bbdc36e 100644 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ b/arch/ppc/platforms/83xx/mpc834x_sys.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/83xx/mpc834x_sys.h - * * MPC834X SYS common board definitions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> @@ -25,7 +23,7 @@ #define VIRT_IMMRBAR ((uint)0xfe000000) #define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_SIZE ((uint)(128 * 1024)) +#define BCSR_SIZE ((uint)(32 * 1024)) #define BCSR_MISC_REG2_OFF 0x07 #define BCSR_MISC_REG2_PORESET 0x01 diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c index 408d64f18e1..9b014df516b 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ b/arch/ppc/platforms/85xx/mpc8540_ads.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc8540_ads.c - * * MPC8540ADS board specific routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h index e48ca3a9739..0b5e7ff856f 100644 --- a/arch/ppc/platforms/85xx/mpc8540_ads.h +++ b/arch/ppc/platforms/85xx/mpc8540_ads.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc8540_ads.h - * * MPC8540ADS board definitions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h index 1a8e6c67355..9754dbd5d18 100644 --- a/arch/ppc/platforms/85xx/mpc8555_cds.h +++ b/arch/ppc/platforms/85xx/mpc8555_cds.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mpc8555_cds.h - * * MPC8555CDS board definitions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c index 442c7ff195d..0cb2e86470e 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ b/arch/ppc/platforms/85xx/mpc8560_ads.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc8560_ads.c - * * MPC8560ADS board specific routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h index 143ae7eefa7..c2247c21fc5 100644 --- a/arch/ppc/platforms/85xx/mpc8560_ads.h +++ b/arch/ppc/platforms/85xx/mpc8560_ads.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mpc8560_ads.h - * * MPC8540ADS board definitions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c index 17ce48fe350..8fd9d763f58 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_ads_common.c - * * MPC85xx ADS board common routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index 198a6a02cde..de8d41aafe1 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_ads_common.h - * * MPC85XX ADS common board definitions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index 1801ab392e2..c9e0aeeca3d 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platform/85xx/mpc85xx_cds_common.c - * * MPC85xx CDS board specific routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h index 5b588cfd0e4..62df54f61ae 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_cds_common.h - * * MPC85xx CDS board definitions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c index 8a72221f816..b73778ecf82 100644 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ b/arch/ppc/platforms/85xx/sbc8560.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/sbc8560.c - * * Wind River SBC8560 board specific routines * * Maintainer: Kumar Gala diff --git a/arch/ppc/platforms/85xx/sbc8560.h b/arch/ppc/platforms/85xx/sbc8560.h index 5e1b00c77da..44ffaa2d2c8 100644 --- a/arch/ppc/platforms/85xx/sbc8560.h +++ b/arch/ppc/platforms/85xx/sbc8560.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/sbc8560.h - * * Wind River SBC8560 board definitions * * Copyright 2003 Motorola Inc. diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c index c02f110219f..d3ff280510f 100644 --- a/arch/ppc/platforms/85xx/sbc85xx.c +++ b/arch/ppc/platforms/85xx/sbc85xx.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platform/85xx/sbc85xx.c - * * WindRiver PowerQUICC III SBC85xx board common routines * * Copyright 2002, 2003 Motorola Inc. diff --git a/arch/ppc/platforms/85xx/sbc85xx.h b/arch/ppc/platforms/85xx/sbc85xx.h index 7af93c691a6..5dd8b6a98c9 100644 --- a/arch/ppc/platforms/85xx/sbc85xx.h +++ b/arch/ppc/platforms/85xx/sbc85xx.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/sbc85xx.h - * * WindRiver PowerQUICC III SBC85xx common board definitions * * Copyright 2003 Motorola Inc. diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c index 061bb7cf2d9..8d7baa9a397 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ b/arch/ppc/platforms/85xx/stx_gp3.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/stx_gp3.c - * * STx GP3 board specific routines * * Dan Malek <dan@embeddededge.com> diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h index 2f25b519515..3f71f8f5937 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ b/arch/ppc/platforms/85xx/stx_gp3.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/stx8560_gp3.h - * * STx GP3 board definitions * * Dan Malek (dan@embeddededge.com) diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c index a5e38ba6273..00af132262b 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/tqm85xx.c - * * TQM85xx (40/41/55/60) board specific routines * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/85xx/tqm85xx.h b/arch/ppc/platforms/85xx/tqm85xx.h index 3775eb363fd..612d80504f9 100644 --- a/arch/ppc/platforms/85xx/tqm85xx.h +++ b/arch/ppc/platforms/85xx/tqm85xx.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/tqm85xx.h - * * TQM85xx (40/41/55/60) board definitions * * Copyright (c) 2005 DENX Software Engineering diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index 51430e294b3..90c62229442 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -2,18 +2,10 @@ # Makefile for the linux kernel. # -# Extra CFLAGS so we don't have to do relative includes -CFLAGS_chrp_setup.o += -Iarch/$(ARCH)/mm - obj-$(CONFIG_APUS) += apus_setup.o ifeq ($(CONFIG_APUS),y) obj-$(CONFIG_PCI) += apus_pci.o endif -obj-$(CONFIG_PPC_CHRP) += chrp_setup.o chrp_time.o chrp_pci.o \ - chrp_pegasos_eth.o -ifeq ($(CONFIG_PPC_CHRP),y) -obj-$(CONFIG_NVRAM) += chrp_nvram.o -endif obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o obj-$(CONFIG_PQ2ADS) += pq2ads.o @@ -37,7 +29,6 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o obj-$(CONFIG_SPRUCE) += spruce.o obj-$(CONFIG_LITE5200) += lite5200.o obj-$(CONFIG_EV64360) += ev64360.o - -ifeq ($(CONFIG_SMP),y) -obj-$(CONFIG_PPC_CHRP) += chrp_smp.o -endif +obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o +obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o +obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o diff --git a/arch/ppc/platforms/apus_setup.c b/arch/ppc/platforms/apus_setup.c index c42c50073da..fe0cdc04d43 100644 --- a/arch/ppc/platforms/apus_setup.c +++ b/arch/ppc/platforms/apus_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/apus_setup.c - * * Copyright (C) 1998, 1999 Jesper Skov * * Basically what is needed to replace functionality found in diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c index aefcc0e7be5..f324f757cae 100644 --- a/arch/ppc/platforms/chestnut.c +++ b/arch/ppc/platforms/chestnut.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chestnut.c - * * Board setup routines for IBM Chestnut * * Author: <source@mvista.com> diff --git a/arch/ppc/platforms/chestnut.h b/arch/ppc/platforms/chestnut.h index 0400b2be40a..e00fd9f8bbd 100644 --- a/arch/ppc/platforms/chestnut.h +++ b/arch/ppc/platforms/chestnut.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chestnut.h - * * Definitions for IBM 750FXGX Eval (Chestnut) * * Author: <source@mvista.com> diff --git a/arch/ppc/platforms/chrp_nvram.c b/arch/ppc/platforms/chrp_nvram.c deleted file mode 100644 index 465ba9b090e..00000000000 --- a/arch/ppc/platforms/chrp_nvram.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * /dev/nvram driver for PPC - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <asm/uaccess.h> -#include <asm/prom.h> -#include <asm/machdep.h> - -static unsigned int nvram_size; -static unsigned char nvram_buf[4]; -static DEFINE_SPINLOCK(nvram_lock); - -static unsigned char chrp_nvram_read(int addr) -{ - unsigned long done, flags; - unsigned char ret; - - if (addr >= nvram_size) { - printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n", - current->comm, addr, nvram_size); - return 0xff; - } - spin_lock_irqsave(&nvram_lock, flags); - if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) - ret = 0xff; - else - ret = nvram_buf[0]; - spin_unlock_irqrestore(&nvram_lock, flags); - - return ret; -} - -static void chrp_nvram_write(int addr, unsigned char val) -{ - unsigned long done, flags; - - if (addr >= nvram_size) { - printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", - current->comm, addr, nvram_size); - return; - } - spin_lock_irqsave(&nvram_lock, flags); - nvram_buf[0] = val; - if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) - printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); - spin_unlock_irqrestore(&nvram_lock, flags); -} - -void __init chrp_nvram_init(void) -{ - struct device_node *nvram; - unsigned int *nbytes_p, proplen; - - nvram = of_find_node_by_type(NULL, "nvram"); - if (nvram == NULL) - return; - - nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen); - if (nbytes_p == NULL || proplen != sizeof(unsigned int)) - return; - - nvram_size = *nbytes_p; - - printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size); - of_node_put(nvram); - - ppc_md.nvram_read_val = chrp_nvram_read; - ppc_md.nvram_write_val = chrp_nvram_write; - - return; -} diff --git a/arch/ppc/platforms/chrp_pci.c b/arch/ppc/platforms/chrp_pci.c deleted file mode 100644 index c7fe6182bb7..00000000000 --- a/arch/ppc/platforms/chrp_pci.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * CHRP pci routines. - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/hydra.h> -#include <asm/prom.h> -#include <asm/gg2.h> -#include <asm/machdep.h> -#include <asm/sections.h> -#include <asm/pci-bridge.h> -#include <asm/open_pic.h> - -/* LongTrail */ -void __iomem *gg2_pci_config_base; - -/* - * The VLSI Golden Gate II has only 512K of PCI configuration space, so we - * limit the bus number to 3 bits - */ - -int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off, - int len, u32 *val) -{ - volatile void __iomem *cfg_data; - struct pci_controller *hose = bus->sysdata; - - if (bus->number > 7) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that off is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); - switch (len) { - case 1: - *val = in_8(cfg_data); - break; - case 2: - *val = in_le16(cfg_data); - break; - default: - *val = in_le32(cfg_data); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, - int len, u32 val) -{ - volatile void __iomem *cfg_data; - struct pci_controller *hose = bus->sysdata; - - if (bus->number > 7) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that off is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); - switch (len) { - case 1: - out_8(cfg_data, val); - break; - case 2: - out_le16(cfg_data, val); - break; - default: - out_le32(cfg_data, val); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops gg2_pci_ops = -{ - gg2_read_config, - gg2_write_config -}; - -/* - * Access functions for PCI config space using RTAS calls. - */ -int -rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - unsigned long ret = ~0UL; - int rval; - - rval = call_rtas("read-pci-config", 2, 2, &ret, addr, len); - *val = ret; - return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; -} - -int -rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int rval; - - rval = call_rtas("write-pci-config", 3, 1, NULL, addr, len, val); - return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rtas_pci_ops = -{ - rtas_read_config, - rtas_write_config -}; - -volatile struct Hydra __iomem *Hydra = NULL; - -int __init -hydra_init(void) -{ - struct device_node *np; - - np = find_devices("mac-io"); - if (np == NULL || np->n_addrs == 0) - return 0; - Hydra = ioremap(np->addrs[0].address, np->addrs[0].size); - printk("Hydra Mac I/O at %x\n", np->addrs[0].address); - printk("Hydra Feature_Control was %x", - in_le32(&Hydra->Feature_Control)); - out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN | - HYDRA_FC_SCSI_CELL_EN | - HYDRA_FC_SCCA_ENABLE | - HYDRA_FC_SCCB_ENABLE | - HYDRA_FC_ARB_BYPASS | - HYDRA_FC_MPIC_ENABLE | - HYDRA_FC_SLOW_SCC_PCLK | - HYDRA_FC_MPIC_IS_MASTER)); - printk(", now %x\n", in_le32(&Hydra->Feature_Control)); - return 1; -} - -void __init -chrp_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - struct device_node *np; - - /* PCI interrupts are controlled by the OpenPIC */ - for_each_pci_dev(dev) { - np = pci_device_to_OF_node(dev); - if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0)) - dev->irq = np->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } -} - -#define PRG_CL_RESET_VALID 0x00010000 - -static void __init -setup_python(struct pci_controller *hose, struct device_node *dev) -{ - u32 __iomem *reg; - u32 val; - unsigned long addr = dev->addrs[0].address; - - setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010); - - /* Clear the magic go-slow bit */ - reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40); - val = in_be32(®[12]); - if (val & PRG_CL_RESET_VALID) { - out_be32(®[12], val & ~PRG_CL_RESET_VALID); - in_be32(®[12]); - } - iounmap(reg); -} - -/* Marvell Discovery II based Pegasos 2 */ -static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev) -{ - struct device_node *root = find_path_device("/"); - struct device_node *rtas; - - rtas = of_find_node_by_name (root, "rtas"); - if (rtas) { - hose->ops = &rtas_pci_ops; - } else { - printk ("RTAS supporting Pegasos OF not found, please upgrade" - " your firmware\n"); - } - pci_assign_all_buses = 1; -} - -void __init -chrp_find_bridges(void) -{ - struct device_node *dev; - int *bus_range; - int len, index = -1; - struct pci_controller *hose; - unsigned int *dma; - char *model, *machine; - int is_longtrail = 0, is_mot = 0, is_pegasos = 0; - struct device_node *root = find_path_device("/"); - - /* - * The PCI host bridge nodes on some machines don't have - * properties to adequately identify them, so we have to - * look at what sort of machine this is as well. - */ - machine = get_property(root, "model", NULL); - if (machine != NULL) { - is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0; - is_mot = strncmp(machine, "MOT", 3) == 0; - if (strncmp(machine, "Pegasos2", 8) == 0) - is_pegasos = 2; - else if (strncmp(machine, "Pegasos", 7) == 0) - is_pegasos = 1; - } - for (dev = root->child; dev != NULL; dev = dev->sibling) { - if (dev->type == NULL || strcmp(dev->type, "pci") != 0) - continue; - ++index; - /* The GG2 bridge on the LongTrail doesn't have an address */ - if (dev->n_addrs < 1 && !is_longtrail) { - printk(KERN_WARNING "Can't use %s: no address\n", - dev->full_name); - continue; - } - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s\n", - dev->full_name); - continue; - } - if (bus_range[1] == bus_range[0]) - printk(KERN_INFO "PCI bus %d", bus_range[0]); - else - printk(KERN_INFO "PCI buses %d..%d", - bus_range[0], bus_range[1]); - printk(" controlled by %s", dev->type); - if (dev->n_addrs > 0) - printk(" at %x", dev->addrs[0].address); - printk("\n"); - - hose = pcibios_alloc_controller(); - if (!hose) { - printk("Can't allocate PCI controller structure for %s\n", - dev->full_name); - continue; - } - hose->arch_data = dev; - hose->first_busno = bus_range[0]; - hose->last_busno = bus_range[1]; - - model = get_property(dev, "model", NULL); - if (model == NULL) - model = "<none>"; - if (device_is_compatible(dev, "IBM,python")) { - setup_python(hose, dev); - } else if (is_mot - || strncmp(model, "Motorola, Grackle", 17) == 0) { - setup_indirect_pci(hose, 0xfec00000, 0xfee00000); - } else if (is_longtrail) { - void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); - hose->ops = &gg2_pci_ops; - hose->cfg_data = p; - gg2_pci_config_base = p; - } else if (is_pegasos == 1) { - setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc); - } else if (is_pegasos == 2) { - setup_peg2(hose, dev); - } else { - printk("No methods for %s (model %s), using RTAS\n", - dev->full_name, model); - hose->ops = &rtas_pci_ops; - } - - pci_process_bridge_OF_ranges(hose, dev, index == 0); - - /* check the first bridge for a property that we can - use to set pci_dram_offset */ - dma = (unsigned int *) - get_property(dev, "ibm,dma-ranges", &len); - if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) { - pci_dram_offset = dma[2] - dma[3]; - printk("pci_dram_offset = %lx\n", pci_dram_offset); - } - } - - /* Do not fixup interrupts from OF tree on pegasos */ - if (is_pegasos == 0) - ppc_md.pcibios_fixup = chrp_pcibios_fixup; -} diff --git a/arch/ppc/platforms/chrp_pegasos_eth.c b/arch/ppc/platforms/chrp_pegasos_eth.c deleted file mode 100644 index 108a6e26518..00000000000 --- a/arch/ppc/platforms/chrp_pegasos_eth.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * arch/ppc/platforms/chrp_pegasos_eth.c - * - * Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de> - * Thanks to : - * Dale Farnsworth <dale@farnsworth.org> - * Mark A. Greer <mgreer@mvista.com> - * Nicolas DET <nd@bplan-gmbh.de> - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - * And anyone else who helped me on this. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/mv643xx.h> -#include <linux/pci.h> - -#define PEGASOS2_MARVELL_REGBASE (0xf1000000) -#define PEGASOS2_MARVELL_REGSIZE (0x00004000) -#define PEGASOS2_SRAM_BASE (0xf2000000) -#define PEGASOS2_SRAM_SIZE (256*1024) - -#define PEGASOS2_SRAM_BASE_ETH0 (PEGASOS2_SRAM_BASE) -#define PEGASOS2_SRAM_BASE_ETH1 (PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) ) - - -#define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4) -#define PEGASOS2_SRAM_TXRING_SIZE (PEGASOS2_SRAM_SIZE/4) - -#undef BE_VERBOSE - -static struct resource mv643xx_eth_shared_resources[] = { - [0] = { - .name = "ethernet shared base", - .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, - .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + - MV643XX_ETH_SHARED_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mv643xx_eth_shared_device = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), - .resource = mv643xx_eth_shared_resources, -}; - -static struct resource mv643xx_eth0_resources[] = { - [0] = { - .name = "eth0 irq", - .start = 9, - .end = 9, - .flags = IORESOURCE_IRQ, - }, -}; - - -static struct mv643xx_eth_platform_data eth0_pd = { - .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0, - .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, - .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, - - .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE, - .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, - .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, -}; - -static struct platform_device eth0_device = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth0_resources), - .resource = mv643xx_eth0_resources, - .dev = { - .platform_data = ð0_pd, - }, -}; - -static struct resource mv643xx_eth1_resources[] = { - [0] = { - .name = "eth1 irq", - .start = 9, - .end = 9, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth1_pd = { - .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1, - .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, - .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, - - .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE, - .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, - .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, -}; - -static struct platform_device eth1_device = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(mv643xx_eth1_resources), - .resource = mv643xx_eth1_resources, - .dev = { - .platform_data = ð1_pd, - }, -}; - -static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { - &mv643xx_eth_shared_device, - ð0_device, - ð1_device, -}; - -/***********/ -/***********/ -#define MV_READ(offset,val) { val = readl(mv643xx_reg_base + offset); } -#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset) - -static void __iomem *mv643xx_reg_base; - -static int Enable_SRAM(void) -{ - u32 ALong; - - if (mv643xx_reg_base == NULL) - mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE, - PEGASOS2_MARVELL_REGSIZE); - - if (mv643xx_reg_base == NULL) - return -ENOMEM; - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n", - (void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base); -#endif - - MV_WRITE(MV64340_SRAM_CONFIG, 0); - - MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16); - - MV_READ(MV64340_BASE_ADDR_ENABLE, ALong); - ALong &= ~(1 << 19); - MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong); - - ALong = 0x02; - ALong |= PEGASOS2_SRAM_BASE & 0xffff0000; - MV_WRITE(MV643XX_ETH_BAR_4, ALong); - - MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000); - - MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); - ALong &= ~(1 << 4); - MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: register unmapped\n"); - printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE); -#endif - - iounmap(mv643xx_reg_base); - mv643xx_reg_base = NULL; - - return 1; -} - - -/***********/ -/***********/ -int mv643xx_eth_add_pds(void) -{ - int ret = 0; - static struct pci_device_id pci_marvell_mv64360[] = { - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) }, - { } - }; - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: init\n"); -#endif - - if (pci_dev_present(pci_marvell_mv64360)) { - ret = platform_add_devices(mv643xx_eth_pd_devs, - ARRAY_SIZE(mv643xx_eth_pd_devs)); - - if ( Enable_SRAM() < 0) - { - eth0_pd.tx_sram_addr = 0; - eth0_pd.tx_sram_size = 0; - eth0_pd.rx_sram_addr = 0; - eth0_pd.rx_sram_size = 0; - - eth1_pd.tx_sram_addr = 0; - eth1_pd.tx_sram_size = 0; - eth1_pd.rx_sram_addr = 0; - eth1_pd.rx_sram_size = 0; - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: Can't enable the " - "SRAM\n"); -#endif - } - } - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: init is over\n"); -#endif - - return ret; -} - -device_initcall(mv643xx_eth_add_pds); diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c deleted file mode 100644 index 48996b78737..00000000000 --- a/arch/ppc/platforms/chrp_setup.c +++ /dev/null @@ -1,671 +0,0 @@ -/* - * arch/ppc/platforms/setup.c - * - * Copyright (C) 1995 Linus Torvalds - * Adapted from 'alpha' version by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu) - */ - -/* - * bootup setup stuff.. - */ - -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/tty.h> -#include <linux/major.h> -#include <linux/interrupt.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/version.h> -#include <linux/adb.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/console.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/initrd.h> -#include <linux/module.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/prom.h> -#include <asm/gg2.h> -#include <asm/pci-bridge.h> -#include <asm/dma.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/hydra.h> -#include <asm/sections.h> -#include <asm/time.h> -#include <asm/btext.h> -#include <asm/i8259.h> -#include <asm/open_pic.h> -#include <asm/xmon.h> -#include "mem_pieces.h" - -unsigned long chrp_get_rtc_time(void); -int chrp_set_rtc_time(unsigned long nowtime); -void chrp_calibrate_decr(void); -long chrp_time_init(void); - -void chrp_find_bridges(void); -void chrp_event_scan(void); -void rtas_display_progress(char *, unsigned short); -void rtas_indicator_progress(char *, unsigned short); -void btext_progress(char *, unsigned short); - -extern int of_show_percpuinfo(struct seq_file *, int); - -int _chrp_type; -EXPORT_SYMBOL(_chrp_type); - -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include <linux/interrupt.h> (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); - -extern dev_t boot_dev; - -extern PTE *Hash, *Hash_end; -extern unsigned long Hash_size, Hash_mask; -extern int probingmem; -extern unsigned long loops_per_jiffy; -static int max_width; - -#ifdef CONFIG_SMP -extern struct smp_ops_t chrp_smp_ops; -#endif - -static const char *gg2_memtypes[4] = { - "FPM", "SDRAM", "EDO", "BEDO" -}; -static const char *gg2_cachesizes[4] = { - "256 KB", "512 KB", "1 MB", "Reserved" -}; -static const char *gg2_cachetypes[4] = { - "Asynchronous", "Reserved", "Flow-Through Synchronous", - "Pipelined Synchronous" -}; -static const char *gg2_cachemodes[4] = { - "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" -}; - -int -chrp_show_cpuinfo(struct seq_file *m) -{ - int i, sdramen; - unsigned int t; - struct device_node *root; - const char *model = ""; - - root = find_path_device("/"); - if (root) - model = get_property(root, "model", NULL); - seq_printf(m, "machine\t\t: CHRP %s\n", model); - - /* longtrail (goldengate) stuff */ - if (!strncmp(model, "IBM,LongTrail", 13)) { - /* VLSI VAS96011/12 `Golden Gate 2' */ - /* Memory banks */ - sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) - >>31) & 1; - for (i = 0; i < (sdramen ? 4 : 6); i++) { - t = in_le32(gg2_pci_config_base+ - GG2_PCI_DRAM_BANK0+ - i*4); - if (!(t & 1)) - continue; - switch ((t>>8) & 0x1f) { - case 0x1f: - model = "4 MB"; - break; - case 0x1e: - model = "8 MB"; - break; - case 0x1c: - model = "16 MB"; - break; - case 0x18: - model = "32 MB"; - break; - case 0x10: - model = "64 MB"; - break; - case 0x00: - model = "128 MB"; - break; - default: - model = "Reserved"; - break; - } - seq_printf(m, "memory bank %d\t: %s %s\n", i, model, - gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); - } - /* L2 cache */ - t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); - seq_printf(m, "board l2\t: %s %s (%s)\n", - gg2_cachesizes[(t>>7) & 3], - gg2_cachetypes[(t>>2) & 3], - gg2_cachemodes[t & 3]); - } - return 0; -} - -/* - * Fixes for the National Semiconductor PC78308VUL SuperI/O - * - * Some versions of Open Firmware incorrectly initialize the IRQ settings - * for keyboard and mouse - */ -static inline void __init sio_write(u8 val, u8 index) -{ - outb(index, 0x15c); - outb(val, 0x15d); -} - -static inline u8 __init sio_read(u8 index) -{ - outb(index, 0x15c); - return inb(0x15d); -} - -static void __init sio_fixup_irq(const char *name, u8 device, u8 level, - u8 type) -{ - u8 level0, type0, active; - - /* select logical device */ - sio_write(device, 0x07); - active = sio_read(0x30); - level0 = sio_read(0x70); - type0 = sio_read(0x71); - if (level0 != level || type0 != type || !active) { - printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " - "remapping to level %d, type %d, active\n", - name, level0, type0, !active ? "in" : "", level, type); - sio_write(0x01, 0x30); - sio_write(level, 0x70); - sio_write(type, 0x71); - } -} - -static void __init sio_init(void) -{ - struct device_node *root; - - if ((root = find_path_device("/")) && - !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) { - /* logical device 0 (KBC/Keyboard) */ - sio_fixup_irq("keyboard", 0, 1, 2); - /* select logical device 1 (KBC/Mouse) */ - sio_fixup_irq("mouse", 1, 12, 2); - } -} - - -static void __init pegasos_set_l2cr(void) -{ - struct device_node *np; - - /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ - if (_chrp_type != _CHRP_Pegasos) - return; - - /* Enable L2 cache if needed */ - np = find_type_devices("cpu"); - if (np != NULL) { - unsigned int *l2cr = (unsigned int *) - get_property (np, "l2cr", NULL); - if (l2cr == NULL) { - printk ("Pegasos l2cr : no cpu l2cr property found\n"); - return; - } - if (!((*l2cr) & 0x80000000)) { - printk ("Pegasos l2cr : L2 cache was not active, " - "activating\n"); - _set_L2CR(0); - _set_L2CR((*l2cr) | 0x80000000); - } - } -} - -void __init chrp_setup_arch(void) -{ - struct device_node *device; - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000/HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - /* this is fine for chrp */ - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - /* On pegasos, enable the L2 cache if not already done by OF */ - pegasos_set_l2cr(); - - /* Lookup PCI host bridges */ - chrp_find_bridges(); - -#ifndef CONFIG_PPC64BRIDGE - /* - * Temporary fixes for PCI devices. - * -- Geert - */ - hydra_init(); /* Mac I/O */ - -#endif /* CONFIG_PPC64BRIDGE */ - - /* - * Fix the Super I/O configuration - */ - sio_init(); - - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - if ( rtas_data ) { - struct property *p; - device = find_devices("rtas"); - for ( p = device->properties; - p && strncmp(p->name, "rtas-event-scan-rate", 20); - p = p->next ) - /* nothing */ ; - if ( p && *(unsigned long *)p->value ) { - ppc_md.heartbeat = chrp_event_scan; - ppc_md.heartbeat_reset = (HZ/(*(unsigned long *)p->value)*30)-1; - ppc_md.heartbeat_count = 1; - printk("RTAS Event Scan Rate: %lu (%lu jiffies)\n", - *(unsigned long *)p->value, ppc_md.heartbeat_reset ); - } - } - - pci_create_OF_bus_map(); -} - -void -chrp_event_scan(void) -{ - unsigned char log[1024]; - unsigned long ret = 0; - /* XXX: we should loop until the hardware says no more error logs -- Cort */ - call_rtas( "event-scan", 4, 1, &ret, 0xffffffff, 0, - __pa(log), 1024 ); - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; -} - -void -chrp_restart(char *cmd) -{ - printk("RTAS system-reboot returned %d\n", - call_rtas("system-reboot", 0, 1, NULL)); - for (;;); -} - -void -chrp_power_off(void) -{ - /* allow power on only with power button press */ - printk("RTAS power-off returned %d\n", - call_rtas("power-off", 2, 1, NULL,0xffffffff,0xffffffff)); - for (;;); -} - -void -chrp_halt(void) -{ - chrp_power_off(); -} - -/* - * Finds the open-pic node and sets OpenPIC_Addr based on its reg property. - * Then checks if it has an interrupt-ranges property. If it does then - * we have a distributed open-pic, so call openpic_set_sources to tell - * the openpic code where to find the interrupt source registers. - */ -static void __init chrp_find_openpic(void) -{ - struct device_node *np; - int len, i; - unsigned int *iranges; - void __iomem *isu; - - np = find_type_devices("open-pic"); - if (np == NULL || np->n_addrs == 0) - return; - printk(KERN_INFO "OpenPIC at %x (size %x)\n", - np->addrs[0].address, np->addrs[0].size); - OpenPIC_Addr = ioremap(np->addrs[0].address, 0x40000); - if (OpenPIC_Addr == NULL) { - printk(KERN_ERR "Failed to map OpenPIC!\n"); - return; - } - - iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); - if (iranges == NULL || len < 2 * sizeof(unsigned int)) - return; /* not distributed */ - - /* - * The first pair of cells in interrupt-ranges refers to the - * IDU; subsequent pairs refer to the ISUs. - */ - len /= 2 * sizeof(unsigned int); - if (np->n_addrs < len) { - printk(KERN_ERR "Insufficient addresses for distributed" - " OpenPIC (%d < %d)\n", np->n_addrs, len); - return; - } - if (iranges[1] != 0) { - printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", - iranges[0], iranges[0] + iranges[1] - 1); - openpic_set_sources(iranges[0], iranges[1], NULL); - } - for (i = 1; i < len; ++i) { - iranges += 2; - printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x (%x)\n", - iranges[0], iranges[0] + iranges[1] - 1, - np->addrs[i].address, np->addrs[i].size); - isu = ioremap(np->addrs[i].address, np->addrs[i].size); - if (isu != NULL) - openpic_set_sources(iranges[0], iranges[1], isu); - else - printk(KERN_ERR "Failed to map OpenPIC ISU at %x!\n", - np->addrs[i].address); - } -} - -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) -static struct irqaction xmon_irqaction = { - .handler = xmon_irq, - .mask = CPU_MASK_NONE, - .name = "XMON break", -}; -#endif - -void __init chrp_init_IRQ(void) -{ - struct device_node *np; - unsigned long chrp_int_ack = 0; - unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - struct device_node *kbd; -#endif - - for (np = find_devices("pci"); np != NULL; np = np->next) { - unsigned int *addrp = (unsigned int *) - get_property(np, "8259-interrupt-acknowledge", NULL); - - if (addrp == NULL) - continue; - chrp_int_ack = addrp[prom_n_addr_cells(np)-1]; - break; - } - if (np == NULL) - printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n"); - - chrp_find_openpic(); - - if (OpenPIC_Addr) { - prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS); - OpenPIC_InitSenses = init_senses; - OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS; - - openpic_init(NUM_8259_INTERRUPTS); - /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */ - openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", - i8259_irq); - - } - i8259_init(chrp_int_ack, 0); - -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - /* see if there is a keyboard in the device tree - with a parent of type "adb" */ - for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next) - if (kbd->parent && kbd->parent->type - && strcmp(kbd->parent->type, "adb") == 0) - break; - if (kbd) - setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); -#endif -} - -void __init -chrp_init2(void) -{ -#ifdef CONFIG_NVRAM - chrp_nvram_init(); -#endif - - request_region(0x20,0x20,"pic1"); - request_region(0xa0,0x20,"pic2"); - request_region(0x00,0x20,"dma1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xc0,0x20,"dma2"); - - if (ppc_md.progress) - ppc_md.progress(" Have fun! ", 0x7777); -} - -static struct device_node *memory_node; - -static int __init get_mem_prop(char *name, struct mem_pieces *mp) -{ - struct reg_property *rp; - int i, s; - unsigned int *ip; - int nac = prom_n_addr_cells(memory_node); - int nsc = prom_n_size_cells(memory_node); - - ip = (unsigned int *) get_property(memory_node, name, &s); - if (ip == NULL) { - printk(KERN_ERR "error: couldn't get %s property on /memory\n", - name); - return 0; - } - s /= (nsc + nac) * 4; - rp = mp->regions; - for (i = 0; i < s; ++i, ip += nac+nsc) { - if (nac >= 2 && ip[nac-2] != 0) - continue; - rp->address = ip[nac-1]; - if (nsc >= 2 && ip[nac+nsc-2] != 0) - rp->size = ~0U; - else - rp->size = ip[nac+nsc-1]; - ++rp; - } - mp->n_regions = rp - mp->regions; - - /* Make sure the pieces are sorted. */ - mem_pieces_sort(mp); - mem_pieces_coalesce(mp); - return 1; -} - -static unsigned long __init chrp_find_end_of_memory(void) -{ - unsigned long a, total; - struct mem_pieces phys_mem; - - /* - * Find out where physical memory is, and check that it - * starts at 0 and is contiguous. It seems that RAM is - * always physically contiguous on Power Macintoshes. - * - * Supporting discontiguous physical memory isn't hard, - * it just makes the virtual <-> physical mapping functions - * more complicated (or else you end up wasting space - * in mem_map). - */ - memory_node = find_devices("memory"); - if (memory_node == NULL || !get_mem_prop("reg", &phys_mem) - || phys_mem.n_regions == 0) - panic("No RAM??"); - a = phys_mem.regions[0].address; - if (a != 0) - panic("RAM doesn't start at physical address 0"); - total = phys_mem.regions[0].size; - - if (phys_mem.n_regions > 1) { - printk("RAM starting at 0x%x is not contiguous\n", - phys_mem.regions[1].address); - printk("Using RAM from 0 to 0x%lx\n", total-1); - } - - return total; -} - -void __init -chrp_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - struct device_node *root = find_path_device ("/"); - char *machine = NULL; - -#ifdef CONFIG_BLK_DEV_INITRD - /* take care of initrd if we have one */ - if ( r6 ) - { - initrd_start = r6 + KERNELBASE; - initrd_end = r6 + r7 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - isa_io_base = CHRP_ISA_IO_BASE; /* default value */ - ppc_do_canonicalize_irqs = 1; - - if (root) - machine = get_property(root, "model", NULL); - if (machine && strncmp(machine, "Pegasos", 7) == 0) { - _chrp_type = _CHRP_Pegasos; - } else if (machine && strncmp(machine, "IBM", 3) == 0) { - _chrp_type = _CHRP_IBM; - } else if (machine && strncmp(machine, "MOT", 3) == 0) { - _chrp_type = _CHRP_Motorola; - } else { - /* Let's assume it is an IBM chrp if all else fails */ - _chrp_type = _CHRP_IBM; - } - - ppc_md.setup_arch = chrp_setup_arch; - ppc_md.show_percpuinfo = of_show_percpuinfo; - ppc_md.show_cpuinfo = chrp_show_cpuinfo; - - ppc_md.init_IRQ = chrp_init_IRQ; - if (_chrp_type == _CHRP_Pegasos) - ppc_md.get_irq = i8259_irq; - else - ppc_md.get_irq = openpic_get_irq; - - ppc_md.init = chrp_init2; - - ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; - - ppc_md.restart = chrp_restart; - ppc_md.power_off = chrp_power_off; - ppc_md.halt = chrp_halt; - - ppc_md.time_init = chrp_time_init; - ppc_md.set_rtc_time = chrp_set_rtc_time; - ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; - - ppc_md.find_end_of_memory = chrp_find_end_of_memory; - - if (rtas_data) { - struct device_node *rtas; - unsigned int *p; - - rtas = find_devices("rtas"); - if (rtas != NULL) { - if (get_property(rtas, "display-character", NULL)) { - ppc_md.progress = rtas_display_progress; - p = (unsigned int *) get_property - (rtas, "ibm,display-line-length", NULL); - if (p) - max_width = *p; - } else if (get_property(rtas, "set-indicator", NULL)) - ppc_md.progress = rtas_indicator_progress; - } - } -#ifdef CONFIG_BOOTX_TEXT - if (ppc_md.progress == NULL && boot_text_mapped) - ppc_md.progress = btext_progress; -#endif - -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ - - /* - * Print the banner, then scroll down so boot progress - * can be printed. -- Cort - */ - if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); -} - -void -rtas_display_progress(char *s, unsigned short hex) -{ - int width; - char *os = s; - - if ( call_rtas( "display-character", 1, 1, NULL, '\r' ) ) - return; - - width = max_width; - while ( *os ) - { - if ( (*os == '\n') || (*os == '\r') ) - width = max_width; - else - width--; - call_rtas( "display-character", 1, 1, NULL, *os++ ); - /* if we overwrite the screen length */ - if ( width == 0 ) - while ( (*os != 0) && (*os != '\n') && (*os != '\r') ) - os++; - } - - /*while ( width-- > 0 )*/ - call_rtas( "display-character", 1, 1, NULL, ' ' ); -} - -void -rtas_indicator_progress(char *s, unsigned short hex) -{ - call_rtas("set-indicator", 3, 1, NULL, 6, 0, hex); -} - -#ifdef CONFIG_BOOTX_TEXT -void -btext_progress(char *s, unsigned short hex) -{ - prom_print(s); - prom_print("\n"); -} -#endif /* CONFIG_BOOTX_TEXT */ diff --git a/arch/ppc/platforms/chrp_smp.c b/arch/ppc/platforms/chrp_smp.c deleted file mode 100644 index 97e539557ec..00000000000 --- a/arch/ppc/platforms/chrp_smp.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Smp support for CHRP machines. - * - * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great - * deal of code from the sparc and intel versions. - * - * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/spinlock.h> - -#include <asm/ptrace.h> -#include <asm/atomic.h> -#include <asm/irq.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/smp.h> -#include <asm/residual.h> -#include <asm/time.h> -#include <asm/open_pic.h> -#include <asm/machdep.h> - -extern unsigned long smp_chrp_cpu_nr; - -static int __init -smp_chrp_probe(void) -{ - if (smp_chrp_cpu_nr > 1) - openpic_request_IPIs(); - - return smp_chrp_cpu_nr; -} - -static void __devinit -smp_chrp_kick_cpu(int nr) -{ - *(unsigned long *)KERNELBASE = nr; - asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory"); -} - -static void __devinit -smp_chrp_setup_cpu(int cpu_nr) -{ - if (OpenPIC_Addr) - do_openpic_setup_cpu(); -} - -static DEFINE_SPINLOCK(timebase_lock); -static unsigned int timebase_upper = 0, timebase_lower = 0; - -void __devinit -smp_chrp_give_timebase(void) -{ - spin_lock(&timebase_lock); - call_rtas("freeze-time-base", 0, 1, NULL); - timebase_upper = get_tbu(); - timebase_lower = get_tbl(); - spin_unlock(&timebase_lock); - - while (timebase_upper || timebase_lower) - barrier(); - call_rtas("thaw-time-base", 0, 1, NULL); -} - -void __devinit -smp_chrp_take_timebase(void) -{ - while (!(timebase_upper || timebase_lower)) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase_upper, timebase_lower); - timebase_upper = 0; - timebase_lower = 0; - spin_unlock(&timebase_lock); - printk("CPU %i taken timebase\n", smp_processor_id()); -} - -/* CHRP with openpic */ -struct smp_ops_t chrp_smp_ops = { - .message_pass = smp_openpic_message_pass, - .probe = smp_chrp_probe, - .kick_cpu = smp_chrp_kick_cpu, - .setup_cpu = smp_chrp_setup_cpu, - .give_timebase = smp_chrp_give_timebase, - .take_timebase = smp_chrp_take_timebase, -}; diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c deleted file mode 100644 index 57753a55b58..00000000000 --- a/arch/ppc/platforms/chrp_time.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * arch/ppc/platforms/chrp_time.c - * - * Copyright (C) 1991, 1992, 1995 Linus Torvalds - * - * Adapted for PowerPC (PReP) by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu). - * Copied and modified from arch/i386/kernel/time.c - * - */ -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/kernel_stat.h> -#include <linux/mc146818rtc.h> -#include <linux/init.h> -#include <linux/bcd.h> - -#include <asm/io.h> -#include <asm/nvram.h> -#include <asm/prom.h> -#include <asm/sections.h> -#include <asm/time.h> - -extern spinlock_t rtc_lock; - -static int nvram_as1 = NVRAM_AS1; -static int nvram_as0 = NVRAM_AS0; -static int nvram_data = NVRAM_DATA; - -long __init chrp_time_init(void) -{ - struct device_node *rtcs; - int base; - - rtcs = find_compatible_devices("rtc", "pnpPNP,b00"); - if (rtcs == NULL) - rtcs = find_compatible_devices("rtc", "ds1385-rtc"); - if (rtcs == NULL || rtcs->addrs == NULL) - return 0; - base = rtcs->addrs[0].address; - nvram_as1 = 0; - nvram_as0 = base; - nvram_data = base + 1; - - return 0; -} - -int chrp_cmos_clock_read(int addr) -{ - if (nvram_as1 != 0) - outb(addr>>8, nvram_as1); - outb(addr, nvram_as0); - return (inb(nvram_data)); -} - -void chrp_cmos_clock_write(unsigned long val, int addr) -{ - if (nvram_as1 != 0) - outb(addr>>8, nvram_as1); - outb(addr, nvram_as0); - outb(val, nvram_data); - return; -} - -/* - * Set the hardware clock. -- Cort - */ -int chrp_set_rtc_time(unsigned long nowtime) -{ - unsigned char save_control, save_freq_select; - struct rtc_time tm; - - spin_lock(&rtc_lock); - to_tm(nowtime, &tm); - - save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */ - - chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL); - - save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ - - chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - tm.tm_year -= 1900; - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(tm.tm_sec); - BIN_TO_BCD(tm.tm_min); - BIN_TO_BCD(tm.tm_hour); - BIN_TO_BCD(tm.tm_mon); - BIN_TO_BCD(tm.tm_mday); - BIN_TO_BCD(tm.tm_year); - } - chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS); - chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES); - chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS); - chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH); - chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH); - chrp_cmos_clock_write(tm.tm_year,RTC_YEAR); - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - chrp_cmos_clock_write(save_control, RTC_CONTROL); - chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT); - - spin_unlock(&rtc_lock); - return 0; -} - -unsigned long chrp_get_rtc_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - int uip, i; - - /* The Linux interpretation of the CMOS clock register contents: - * When the Update-In-Progress (UIP) flag goes from 1 to 0, the - * RTC registers show the second which has precisely just started. - * Let's hope other operating systems interpret the RTC the same way. - */ - - /* Since the UIP flag is set for about 2.2 ms and the clock - * is typically written with a precision of 1 jiffy, trying - * to obtain a precision better than a few milliseconds is - * an illusion. Only consistency is interesting, this also - * allows to use the routine for /dev/rtc without a potential - * 1 second kernel busy loop triggered by any reader of /dev/rtc. - */ - - for ( i = 0; i<1000000; i++) { - uip = chrp_cmos_clock_read(RTC_FREQ_SELECT); - sec = chrp_cmos_clock_read(RTC_SECONDS); - min = chrp_cmos_clock_read(RTC_MINUTES); - hour = chrp_cmos_clock_read(RTC_HOURS); - day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH); - mon = chrp_cmos_clock_read(RTC_MONTH); - year = chrp_cmos_clock_read(RTC_YEAR); - uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT); - if ((uip & RTC_UIP)==0) break; - } - - if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } - if ((year += 1900) < 1970) - year += 100; - return mktime(year, mon, day, hour, min, sec); -} - -/* - * Calibrate the decrementer frequency with the VIA timer 1. - */ -#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ - -/* VIA registers */ -#define RS 0x200 /* skip between registers */ -#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ -#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ -#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ -#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ -#define ACR (11*RS) /* Auxiliary control register */ -#define IFR (13*RS) /* Interrupt flag register */ - -/* Bits in ACR */ -#define T1MODE 0xc0 /* Timer 1 mode */ -#define T1MODE_CONT 0x40 /* continuous interrupts */ - -/* Bits in IFR and IER */ -#define T1_INT 0x40 /* Timer 1 interrupt */ - -static int __init chrp_via_calibrate_decr(void) -{ - struct device_node *vias; - volatile unsigned char __iomem *via; - int count = VIA_TIMER_FREQ_6 / 100; - unsigned int dstart, dend; - - vias = find_devices("via-cuda"); - if (vias == 0) - vias = find_devices("via"); - if (vias == 0 || vias->n_addrs == 0) - return 0; - via = ioremap(vias->addrs[0].address, vias->addrs[0].size); - - /* set timer 1 for continuous interrupts */ - out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); - /* set the counter to a small value */ - out_8(&via[T1CH], 2); - /* set the latch to `count' */ - out_8(&via[T1LL], count); - out_8(&via[T1LH], count >> 8); - /* wait until it hits 0 */ - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dstart = get_dec(); - /* clear the interrupt & wait until it hits 0 again */ - in_8(&via[T1CL]); - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dend = get_dec(); - - tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); - tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); - - printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", - tb_ticks_per_jiffy, dstart - dend); - - iounmap(via); - - return 1; -} - -void __init chrp_calibrate_decr(void) -{ - struct device_node *cpu; - unsigned int freq, *fp; - - if (chrp_via_calibrate_decr()) - return; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - freq = 16666000; /* hardcoded default */ - cpu = find_type_devices("cpu"); - if (cpu != 0) { - fp = (unsigned int *) - get_property(cpu, "timebase-frequency", NULL); - if (fp != 0) - freq = *fp; - } - printk("time_init: decrementer frequency = %u.%.6u MHz\n", - freq/1000000, freq%1000000); - tb_ticks_per_jiffy = freq / HZ; - tb_to_us = mulhwu_scale_factor(freq, 1000000); -} diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c index 6ca7bcac947..790475c22fd 100644 --- a/arch/ppc/platforms/cpci690.c +++ b/arch/ppc/platforms/cpci690.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/cpci690.c - * * Board setup routines for the Force CPCI690 board. * * Author: Mark A. Greer <mgreer@mvista.com> @@ -290,7 +288,7 @@ cpci690_fixup_mpsc_pdata(struct platform_device *pdev) pdata->brg_clk_freq = cpci690_get_bus_freq(); } -static int __init +static int cpci690_platform_notify(struct device *dev) { static struct { diff --git a/arch/ppc/platforms/cpci690.h b/arch/ppc/platforms/cpci690.h index 49584c9cedf..0fa5a4c31b6 100644 --- a/arch/ppc/platforms/cpci690.h +++ b/arch/ppc/platforms/cpci690.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/cpci690.h - * * Definitions for Force CPCI690 * * Author: Mark A. Greer <mgreer@mvista.com> diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c index ffde8f6f630..31e8e21e1d5 100644 --- a/arch/ppc/platforms/ev64260.c +++ b/arch/ppc/platforms/ev64260.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ev64260.c - * * Board setup routines for the Marvell/Galileo EV-64260-BP Evaluation Board. * * Author: Mark A. Greer <mgreer@mvista.com> @@ -416,7 +414,7 @@ ev64260_fixup_mpsc_pdata(struct platform_device *pdev) return; } -static int __init +static int ev64260_platform_notify(struct device *dev) { static struct { diff --git a/arch/ppc/platforms/ev64260.h b/arch/ppc/platforms/ev64260.h index bedffced3a0..44d90d56745 100644 --- a/arch/ppc/platforms/ev64260.h +++ b/arch/ppc/platforms/ev64260.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ev64260.h - * * Definitions for Marvell/Galileo EV-64260-BP Evaluation Board. * * Author: Mark A. Greer <mgreer@mvista.com> diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c index b9d844f88c2..104ac9b16e8 100644 --- a/arch/ppc/platforms/ev64360.c +++ b/arch/ppc/platforms/ev64360.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ev64360.c - * * Board setup routines for the Marvell EV-64360-BP Evaluation Board. * * Author: Lee Nicks <allinux@gmail.com> @@ -300,7 +298,7 @@ ev64360_fixup_eth_pdata(struct platform_device *pdev) } #endif -static int __init +static int ev64360_platform_notify(struct device *dev) { static struct { diff --git a/arch/ppc/platforms/ev64360.h b/arch/ppc/platforms/ev64360.h index 68eabe49039..b30f4722690 100644 --- a/arch/ppc/platforms/ev64360.h +++ b/arch/ppc/platforms/ev64360.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/ev64360.h - * * Definitions for Marvell EV-64360-BP Evaluation Board. * * Author: Lee Nicks <allinux@gmail.com> diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h index a48fb8d723e..e1c0b1b6dcb 100644 --- a/arch/ppc/platforms/fads.h +++ b/arch/ppc/platforms/fads.h @@ -112,7 +112,7 @@ /* CPM Ethernet through SCC1 or SCC2 */ -#ifdef CONFIG_SCC1_ENET /* Probably 860 variant */ +#if defined(CONFIG_SCC1_ENET) || defined(CONFIG_MPC8xx_SECOND_ETH_SCC1) /* Probably 860 variant */ /* Bits in parallel I/O port registers that have to be set/cleared * to configure the pins for SCC1 use. * TCLK - CLK1, RCLK - CLK2. diff --git a/arch/ppc/platforms/gemini.h b/arch/ppc/platforms/gemini.h index 06de5924891..5528fd0a121 100644 --- a/arch/ppc/platforms/gemini.h +++ b/arch/ppc/platforms/gemini.h @@ -1,7 +1,4 @@ /* - * arch/ppc/platforms/gemini.h - * - * * Onboard registers and descriptions for Synergy Microsystems' * "Gemini" boards. * diff --git a/arch/ppc/platforms/gemini_prom.S b/arch/ppc/platforms/gemini_prom.S index 8c5065d5650..b181f210800 100644 --- a/arch/ppc/platforms/gemini_prom.S +++ b/arch/ppc/platforms/gemini_prom.S @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/gemini_prom.S - * * Not really prom support code (yet), but sort of anti-prom code. The current * bootloader does a number of things it shouldn't and doesn't do things that it * should. The stuff in here is mainly a hodge-podge collection of setup code diff --git a/arch/ppc/platforms/gemini_setup.c b/arch/ppc/platforms/gemini_setup.c index 729897c5903..0090ff15460 100644 --- a/arch/ppc/platforms/gemini_setup.c +++ b/arch/ppc/platforms/gemini_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/gemini_setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c index 50039a204c2..75dc2ee87d2 100644 --- a/arch/ppc/platforms/hdpu.c +++ b/arch/ppc/platforms/hdpu.c @@ -1,7 +1,4 @@ - /* - * arch/ppc/platforms/hdpu_setup.c - * * Board setup routines for the Sky Computers HDPU Compute Blade. * * Written by Brian Waite <waite@skycomputers.com> @@ -319,11 +316,10 @@ static void __init hdpu_fixup_eth_pdata(struct platform_device *pd) struct mv643xx_eth_platform_data *eth_pd; eth_pd = pd->dev.platform_data; - eth_pd->port_serial_control = - mv64x60_read(&bh, MV643XX_ETH_PORT_SERIAL_CONTROL_REG(pd->id) & ~1); - eth_pd->force_phy_addr = 1; eth_pd->phy_addr = pd->id; + eth_pd->speed = SPEED_100; + eth_pd->duplex = DUPLEX_FULL; eth_pd->tx_queue_size = 400; eth_pd->rx_queue_size = 800; } @@ -354,7 +350,7 @@ static void __init hdpu_fixup_cpustate_pdata(struct platform_device *pd) } #endif -static int __init hdpu_platform_notify(struct device *dev) +static int hdpu_platform_notify(struct device *dev) { static struct { char *bus_id; diff --git a/arch/ppc/platforms/hdpu.h b/arch/ppc/platforms/hdpu.h index 07c3cffb5c7..f9e020b6970 100644 --- a/arch/ppc/platforms/hdpu.h +++ b/arch/ppc/platforms/hdpu.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/hdpu.h - * * Definitions for Sky Computers HDPU board. * * Brian Waite <waite@skycomputers.com> diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index 6e58e30ceed..ad21280e892 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/katana.c - * * Board setup routines for the Artesyn Katana cPCI boards. * * Author: Tim Montgomery <timm@artesyncp.com> @@ -598,7 +596,7 @@ katana_fixup_mv64xxx_pdata(struct platform_device *pdev) } #endif -static int __init +static int katana_platform_notify(struct device *dev) { static struct { @@ -664,12 +662,11 @@ katana_setup_mtd(void) ptbl_entries = (size >= (64*MB)) ? 6 : 4; - if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition), + if ((ptbl = kcalloc(ptbl_entries, sizeof(struct mtd_partition), GFP_KERNEL)) == NULL) { printk(KERN_WARNING "Can't alloc MTD partition table\n"); return -ENOMEM; } - memset(ptbl, 0, ptbl_entries * sizeof(struct mtd_partition)); ptbl[0].name = "Monitor"; ptbl[0].size = KATANA_MTD_MONITOR_SIZE; diff --git a/arch/ppc/platforms/katana.h b/arch/ppc/platforms/katana.h index 597257eff2e..0a9b036526b 100644 --- a/arch/ppc/platforms/katana.h +++ b/arch/ppc/platforms/katana.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/katana.h - * * Definitions for Artesyn Katana750i/3750 board. * * Author: Tim Montgomery <timm@artesyncp.com> diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c index 7ed52dc340c..fecbe9adc9e 100644 --- a/arch/ppc/platforms/lite5200.c +++ b/arch/ppc/platforms/lite5200.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/lite5200.c - * * Platform support file for the Freescale LITE5200 based on MPC52xx. * A maximum of this file should be moved to syslib/mpc52xx_????? * so that new platform based on MPC52xx need a minimal platform file @@ -36,8 +34,7 @@ #include <asm/mpc52xx.h> #include <asm/ppc_sys.h> #include <asm/machdep.h> - -#include <syslib/mpc52xx_pci.h> +#include <asm/pci-bridge.h> extern int powersave_nap; @@ -70,44 +67,53 @@ lite5200_show_cpuinfo(struct seq_file *m) } #ifdef CONFIG_PCI +#ifdef CONFIG_LITE5200B +static int +lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, + unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {MPC52xx_IRQ0, MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3}, + {MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3, MPC52xx_IRQ0}, + }; + + const long min_idsel = 24, max_idsel = 25, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} +#else /* Original Lite */ static int lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1; } #endif +#endif static void __init lite5200_setup_cpu(void) { - struct mpc52xx_cdm __iomem *cdm; struct mpc52xx_gpio __iomem *gpio; struct mpc52xx_intr __iomem *intr; - struct mpc52xx_xlb __iomem *xlb; u32 port_config; u32 intr_ctrl; /* Map zones */ - cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE); gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE); - xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE); intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE); - if (!cdm || !gpio || !xlb || !intr) { - printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during" - "lite5200_setup_cpu\n"); + if (!gpio || !intr) { + printk(KERN_ERR __FILE__ ": " + "Error while mapping GPIO/INTR during " + "lite5200_setup_cpu\n"); goto unmap_regs; } - /* Use internal 48 Mhz */ - out_8(&cdm->ext_48mhz_en, 0x00); - out_8(&cdm->fd_enable, 0x01); - if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */ - out_be16(&cdm->fd_counters, 0x0001); - else - out_be16(&cdm->fd_counters, 0x5555); - /* Get port mux config */ port_config = in_be32(&gpio->port_config); @@ -118,29 +124,29 @@ lite5200_setup_cpu(void) port_config &= ~0x00007000; /* Differential mode - USB1 only */ port_config |= 0x00001000; + /* ATA CS is on csb_4/5 */ + port_config &= ~0x03000000; + port_config |= 0x01000000; + /* Commit port config */ out_be32(&gpio->port_config, port_config); - /* Configure the XLB Arbiter */ - out_be32(&xlb->master_pri_enable, 0xff); - out_be32(&xlb->master_priority, 0x11111111); - - /* Enable ram snooping for 1GB window */ - out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP); - out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d); - - /* IRQ[0-3] setup : IRQ0 - Level Active Low */ - /* IRQ[1-3] - Level Active High */ + /* IRQ[0-3] setup */ intr_ctrl = in_be32(&intr->ctrl); intr_ctrl &= ~0x00ff0000; - intr_ctrl |= 0x00c00000; +#ifdef CONFIG_LITE5200B + /* IRQ[0-3] Level Active Low */ + intr_ctrl |= 0x00ff0000; +#else + /* IRQ0 Level Active Low + * IRQ[1-3] Level Active High */ + intr_ctrl |= 0x00c00000; +#endif out_be32(&intr->ctrl, intr_ctrl); /* Unmap reg zone */ unmap_regs: - if (cdm) iounmap(cdm); if (gpio) iounmap(gpio); - if (xlb) iounmap(xlb); if (intr) iounmap(intr); } @@ -148,7 +154,8 @@ static void __init lite5200_setup_arch(void) { /* CPU & Port mux setup */ - lite5200_setup_cpu(); + mpc52xx_setup_cpu(); /* Generic */ + lite5200_setup_cpu(); /* Platform specific */ #ifdef CONFIG_PCI /* PCI Bridge setup */ diff --git a/arch/ppc/platforms/lite5200.h b/arch/ppc/platforms/lite5200.h index c1de2aa4717..852a18e24d0 100644 --- a/arch/ppc/platforms/lite5200.h +++ b/arch/ppc/platforms/lite5200.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/lite5200.h - * * Definitions for Freescale LITE5200 : MPC52xx Standard Development * Platform board support * diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c index 06d247c23b8..c6445a727ca 100644 --- a/arch/ppc/platforms/lopec.c +++ b/arch/ppc/platforms/lopec.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/lopec.c - * * Setup routines for the Motorola LoPEC. * * Author: Dan Cox diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c new file mode 100644 index 00000000000..bc9b94f77e3 --- /dev/null +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -0,0 +1,236 @@ +/* + * arch/ppc/platforms/82xx/pq2ads_pd.c + * + * MPC82xx Board-specific PlatformDevice descriptions + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/ioport.h> +#include <linux/fs_enet_pd.h> +#include <linux/platform_device.h> + +#include <asm/io.h> +#include <asm/mpc8260.h> +#include <asm/cpm2.h> +#include <asm/immap_cpm2.h> +#include <asm/irq.h> +#include <asm/ppc_sys.h> +#include <asm/ppcboot.h> + +#include "pq2ads_pd.h" + +static void init_fcc1_ioports(void); +static void init_fcc2_ioports(void); + +static struct fs_mii_bus_info mii_bus_info = { + .method = fsmii_bitbang, + .id = 0, + .i.bitbang = { + .mdio_port = fsiop_portc, + .mdio_bit = 18, + .mdc_port = fsiop_portc, + .mdc_bit = 19, + .delay = 1, + }, +}; + +static struct fs_platform_info mpc82xx_fcc1_pdata = { + .fs_no = fsid_fcc1, + .cp_page = CPM_CR_FCC1_PAGE, + .cp_block = CPM_CR_FCC1_SBLOCK, + .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), + .clk_route = CMX1_CLK_ROUTE, + .clk_mask = CMX1_CLK_MASK, + .init_ioports = init_fcc1_ioports, + + .phy_addr = 0, +#ifdef PHY_INTERRUPT + .phy_irq = PHY_INTERRUPT, +#else + .phy_irq = -1; +#endif + .mem_offset = FCC1_MEM_OFFSET, + .bus_info = &mii_bus_info, + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, +}; + +static struct fs_platform_info mpc82xx_fcc2_pdata = { + .fs_no = fsid_fcc2, + .cp_page = CPM_CR_FCC2_PAGE, + .cp_block = CPM_CR_FCC2_SBLOCK, + .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), + .clk_route = CMX2_CLK_ROUTE, + .clk_mask = CMX2_CLK_MASK, + .init_ioports = init_fcc2_ioports, + + .phy_addr = 3, +#ifdef PHY_INTERRUPT + .phy_irq = PHY_INTERRUPT, +#else + .phy_irq = -1; +#endif + .mem_offset = FCC2_MEM_OFFSET, + .bus_info = &mii_bus_info, + .rx_ring = 32, + .tx_ring = 32, + .rx_copybreak = 240, + .use_napi = 0, + .napi_weight = 17, +}; + +static void init_fcc1_ioports(void) +{ + struct io_port *io; + u32 tempval; + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32)); + + io = &immap->im_ioport; + + /* Enable the PHY */ + clrbits32(bcsr, BCSR1_FETHIEN); + setbits32(bcsr, BCSR1_FETH_RST); + + /* FCC1 pins are on port A/C. */ + /* Configure port A and C pins for FCC1 Ethernet. */ + + tempval = in_be32(&io->iop_pdira); + tempval &= ~PA1_DIRA0; + tempval |= PA1_DIRA1; + out_be32(&io->iop_pdira, tempval); + + tempval = in_be32(&io->iop_psora); + tempval &= ~PA1_PSORA0; + tempval |= PA1_PSORA1; + out_be32(&io->iop_psora, tempval); + + setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1); + + /* Alter clocks */ + tempval = PC_F1TXCLK|PC_F1RXCLK; + + clrbits32(&io->iop_psorc, tempval); + clrbits32(&io->iop_pdirc, tempval); + setbits32(&io->iop_pparc, tempval); + + clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK); + setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE); + iounmap(bcsr); + iounmap(immap); +} + +static void init_fcc2_ioports(void) +{ + cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t)); + u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32)); + + struct io_port *io; + u32 tempval; + + immap = cpm2_immr; + + io = &immap->im_ioport; + + /* Enable the PHY */ + clrbits32(bcsr, BCSR3_FETHIEN2); + setbits32(bcsr, BCSR3_FETH2_RST); + + /* FCC2 are port B/C. */ + /* Configure port A and C pins for FCC2 Ethernet. */ + + tempval = in_be32(&io->iop_pdirb); + tempval &= ~PB2_DIRB0; + tempval |= PB2_DIRB1; + out_be32(&io->iop_pdirb, tempval); + + tempval = in_be32(&io->iop_psorb); + tempval &= ~PB2_PSORB0; + tempval |= PB2_PSORB1; + out_be32(&io->iop_psorb, tempval); + + setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1); + + tempval = PC_F2RXCLK|PC_F2TXCLK; + + /* Alter clocks */ + clrbits32(&io->iop_psorc,tempval); + clrbits32(&io->iop_pdirc,tempval); + setbits32(&io->iop_pparc,tempval); + + clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK); + setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE); + + iounmap(bcsr); + iounmap(immap); +} + + +static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev, + int idx) +{ + bd_t* bi = (void*)__res; + int fs_no = fsid_fcc1+pdev->id-1; + + mpc82xx_fcc1_pdata.dpram_offset = mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase; + mpc82xx_fcc1_pdata.fcc_regs_c = mpc82xx_fcc2_pdata.fcc_regs_c = (u32)cpm2_immr->im_fcc_c; + + switch(fs_no) { + case fsid_fcc1: + memcpy(&mpc82xx_fcc1_pdata.macaddr,bi->bi_enetaddr,6); + pdev->dev.platform_data = &mpc82xx_fcc1_pdata; + break; + case fsid_fcc2: + memcpy(&mpc82xx_fcc2_pdata.macaddr,bi->bi_enetaddr,6); + mpc82xx_fcc2_pdata.macaddr[5] ^= 1; + pdev->dev.platform_data = &mpc82xx_fcc2_pdata; + break; + } +} + +static int mpc8272ads_platform_notify(struct device *dev) +{ + static const struct platform_notify_dev_map dev_map[] = { + { + .bus_id = "fsl-cpm-fcc", + .rtn = mpc8272ads_fixup_enet_pdata + }, + { + .bus_id = NULL + } + }; + platform_notify_map(dev_map,dev); + + return 0; + +} + +int __init mpc8272ads_init(void) +{ + printk(KERN_NOTICE "mpc8272ads: Init\n"); + + platform_notify = mpc8272ads_platform_notify; + + ppc_sys_device_initfunc(); + + ppc_sys_device_disable_all(); + ppc_sys_device_enable(MPC82xx_CPM_FCC1); + ppc_sys_device_enable(MPC82xx_CPM_FCC2); + + return 0; +} + +arch_initcall(mpc8272ads_init); diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c new file mode 100644 index 00000000000..ac8fcc68afe --- /dev/null +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -0,0 +1,273 @@ +/*arch/ppc/platforms/mpc885ads-setup.c + * + * Platform setup for the Freescale mpc885ads board + * + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * Copyright 2005 MontaVista Software Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/device.h> + +#include <linux/fs_enet_pd.h> +#include <linux/mii.h> + +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/time.h> +#include <asm/ppcboot.h> +#include <asm/8xx_immap.h> +#include <asm/commproc.h> +#include <asm/ppc_sys.h> +#include <asm/mpc8xx.h> + +extern unsigned char __res[]; + +static struct fs_mii_bus_info fec_mii_bus_info = { + .method = fsmii_fec, + .id = 0, +}; + +static struct fs_mii_bus_info scc_mii_bus_info = { + .method = fsmii_fixed, + .id = 0, + .i.fixed.speed = 10, + .i.fixed.duplex = 0, +}; + +static struct fs_platform_info mpc8xx_fec_pdata[] = { + { + .rx_ring = 128, + .tx_ring = 16, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = 15, + .phy_irq = -1, + + .use_rmii = 0, + + .bus_info = &fec_mii_bus_info, + } +}; + +static struct fs_platform_info mpc8xx_scc_pdata = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = -1, + .phy_irq = -1, + + .bus_info = &scc_mii_bus_info, +}; + +void __init board_init(void) +{ + volatile cpm8xx_t *cp = cpmp; + unsigned *bcsr_io; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } +#ifdef CONFIG_SERIAL_CPM_SMC1 + cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ + clrbits32(bcsr_io,(0x80000000 >> 7)); +#else + setbits32(bcsr_io,(0x80000000 >> 7)); + + cp->cp_pbpar &= ~(0x000000c0); + cp->cp_pbdir |= 0x000000c0; + cp->cp_smc[0].smc_smcmr = 0; + cp->cp_smc[0].smc_smce = 0; +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + cp->cp_simode &= ~(0xe0000000 >> 1); + cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ + clrbits32(bcsr_io,(0x80000000 >> 13)); +#else + clrbits32(bcsr_io,(0x80000000 >> 13)); + cp->cp_pbpar &= ~(0x00000c00); + cp->cp_pbdir |= 0x00000c00; + cp->cp_smc[1].smc_smcmr = 0; + cp->cp_smc[1].smc_smce = 0; +#endif + iounmap(bcsr_io); +} + +static void setup_fec1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + + setbits16(&immap->im_ioport.iop_pdpar, 0x1fff); + setbits16(&immap->im_ioport.iop_pddir, 0x1fff); +} + +static void setup_scc1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR1\n"); + return; + } + + /* Enable the PHY. + */ + clrbits32(bcsr_io,BCSR1_ETHEN); + + /* Configure port A pins for Txd and Rxd. + */ + /* Disable receive and transmit in case EPPC-Bug started it. + */ + setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD); + clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD); + clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD); + + /* Configure port C pins to enable CLSN and RENA. + */ + clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); + clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); + setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); + /* Configure port A for TCLK and RCLK. + */ + setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK); + clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK); + clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA); + clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA); + + /* Configure Serial Interface clock routing. + * First, clear all SCC bits to zero, then set the ones we want. + */ + clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK); + setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT); + + /* In the original SCC enet driver the following code is placed at + the end of the initialization */ + setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA); + setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA); + +} + +static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) +{ + struct fs_platform_info *fpi = pdev->dev.platform_data; + + volatile cpm8xx_t *cp; + bd_t *bd = (bd_t *) __res; + char *e; + int i; + + /* Get pointer to Communication Processor */ + cp = cpmp; + switch (fs_no) { + case fsid_fec1: + fpi = &mpc8xx_fec_pdata[0]; + fpi->init_ioports = &setup_fec1_ioports; + + break; + case fsid_scc1: + fpi = &mpc8xx_scc_pdata; + fpi->init_ioports = &setup_scc1_ioports; + + break; + default: + printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); + return; + } + + pdev->dev.platform_data = fpi; + fpi->fs_no = fs_no; + + e = (unsigned char *)&bd->bi_enetaddr; + for (i = 0; i < 6; i++) + fpi->macaddr[i] = *e++; + + fpi->macaddr[5 - pdev->id]++; + +} + +static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for FEC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) + return; + mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); +} + +static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for SCC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) + return; + + mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); +} + +static int mpc866ads_platform_notify(struct device *dev) +{ + static const struct platform_notify_dev_map dev_map[] = { + { + .bus_id = "fsl-cpm-fec", + .rtn = mpc866ads_fixup_fec_enet_pdata, + }, + { + .bus_id = "fsl-cpm-scc", + .rtn = mpc866ads_fixup_scc_enet_pdata, + }, + { + .bus_id = NULL + } + }; + + platform_notify_map(dev_map,dev); + + return 0; +} + +int __init mpc866ads_init(void) +{ + printk(KERN_NOTICE "mpc866ads: Init\n"); + + platform_notify = mpc866ads_platform_notify; + + ppc_sys_device_initfunc(); + ppc_sys_device_disable_all(); + +#ifdef MPC8xx_SECOND_ETH_SCC1 + ppc_sys_device_enable(MPC8xx_CPM_SCC1); +#endif + ppc_sys_device_enable(MPC8xx_CPM_FEC1); + + return 0; +} + +arch_initcall(mpc866ads_init); diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c new file mode 100644 index 00000000000..50a99e5f7c6 --- /dev/null +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -0,0 +1,389 @@ +/*arch/ppc/platforms/mpc885ads-setup.c + * + * Platform setup for the Freescale mpc885ads board + * + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * Copyright 2005 MontaVista Software Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/device.h> + +#include <linux/fs_enet_pd.h> +#include <linux/mii.h> + +#include <asm/delay.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/time.h> +#include <asm/ppcboot.h> +#include <asm/8xx_immap.h> +#include <asm/commproc.h> +#include <asm/ppc_sys.h> + +extern unsigned char __res[]; + +static void __init mpc885ads_scc_phy_init(char); + +static struct fs_mii_bus_info fec_mii_bus_info = { + .method = fsmii_fec, + .id = 0, +}; + +static struct fs_mii_bus_info scc_mii_bus_info = { +#ifdef CONFIG_SCC_ENET_8xx_FIXED + .method = fsmii_fixed, +#else + .method = fsmii_fec, +#endif + + .id = 0, +}; + +static struct fs_platform_info mpc8xx_fec_pdata[] = { + { + .rx_ring = 128, + .tx_ring = 16, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = 0, + .phy_irq = SIU_IRQ7, + + .bus_info = &fec_mii_bus_info, + }, { + .rx_ring = 128, + .tx_ring = 16, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = 1, + .phy_irq = SIU_IRQ7, + + .bus_info = &fec_mii_bus_info, + } +}; + +static struct fs_platform_info mpc8xx_scc_pdata = { + .rx_ring = 64, + .tx_ring = 8, + .rx_copybreak = 240, + + .use_napi = 1, + .napi_weight = 17, + + .phy_addr = 2, +#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED + .phy_irq = -1, +#else + .phy_irq = SIU_IRQ7, +#endif + + .bus_info = &scc_mii_bus_info, +}; + +void __init board_init(void) +{ + volatile cpm8xx_t *cp = cpmp; + unsigned int *bcsr_io; + +#ifdef CONFIG_FS_ENET + immap_t *immap = (immap_t *) IMAP_ADDR; +#endif + bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } +#ifdef CONFIG_SERIAL_CPM_SMC1 + cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ + clrbits32(bcsr_io, BCSR1_RS232EN_1); +#else + setbits32(bcsr_io,BCSR1_RS232EN_1); + cp->cp_smc[0].smc_smcmr = 0; + cp->cp_smc[0].smc_smce = 0; +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + cp->cp_simode &= ~(0xe0000000 >> 1); + cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ + clrbits32(bcsr_io,BCSR1_RS232EN_2); +#else + setbits32(bcsr_io,BCSR1_RS232EN_2); + cp->cp_smc[1].smc_smcmr = 0; + cp->cp_smc[1].smc_smce = 0; +#endif + iounmap(bcsr_io); + +#ifdef CONFIG_FS_ENET + /* use MDC for MII (common) */ + setbits16(&immap->im_ioport.iop_pdpar, 0x0080); + clrbits16(&immap->im_ioport.iop_pddir, 0x0080); +#endif +} + +static void setup_fec1_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + + /* configure FEC1 pins */ + setbits16(&immap->im_ioport.iop_papar, 0xf830); + setbits16(&immap->im_ioport.iop_padir, 0x0830); + clrbits16(&immap->im_ioport.iop_padir, 0xf000); + setbits32(&immap->im_cpm.cp_pbpar, 0x00001001); + + clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001); + setbits16(&immap->im_ioport.iop_pcpar, 0x000c); + clrbits16(&immap->im_ioport.iop_pcdir, 0x000c); + setbits32(&immap->im_cpm.cp_pepar, 0x00000003); + + setbits32(&immap->im_cpm.cp_pedir, 0x00000003); + clrbits32(&immap->im_cpm.cp_peso, 0x00000003); + clrbits32(&immap->im_cpm.cp_cptr, 0x00000100); +} + +static void setup_fec2_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + + /* configure FEC2 pins */ + setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc); + setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc); + setbits32(&immap->im_cpm.cp_peso, 0x00037800); + clrbits32(&immap->im_cpm.cp_peso, 0x000087fc); + clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); +} + +static void setup_scc3_ioports(void) +{ + immap_t *immap = (immap_t *) IMAP_ADDR; + unsigned *bcsr_io; + + bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); + + if (bcsr_io == NULL) { + printk(KERN_CRIT "Could not remap BCSR\n"); + return; + } + + /* Enable the PHY. + */ + setbits32(bcsr_io+4, BCSR4_ETH10_RST); + /* Configure port A pins for Txd and Rxd. + */ + setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD); + clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD); + + /* Configure port C pins to enable CLSN and RENA. + */ + clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); + clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); + setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); + + /* Configure port E for TCLK and RCLK. + */ + setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK); + clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); + clrbits32(&immap->im_cpm.cp_pedir, + PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA); + clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK); + setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); + + /* Configure Serial Interface clock routing. + * First, clear all SCC bits to zero, then set the ones we want. + */ + clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK); + setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT); + + /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used. + */ + immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode + * by H/W setting after reset. SCC ethernet controller support only half duplex. + * This discrepancy of modes causes a lot of carrier lost errors. + */ + + /* In the original SCC enet driver the following code is placed at + the end of the initialization */ + setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); + clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA); + setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); + + setbits32(bcsr_io+1, BCSR1_ETHEN); + iounmap(bcsr_io); +} + +static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) +{ + struct fs_platform_info *fpi = pdev->dev.platform_data; + + volatile cpm8xx_t *cp; + bd_t *bd = (bd_t *) __res; + char *e; + int i; + + /* Get pointer to Communication Processor */ + cp = cpmp; + switch (fs_no) { + case fsid_fec1: + fpi = &mpc8xx_fec_pdata[0]; + fpi->init_ioports = &setup_fec1_ioports; + break; + case fsid_fec2: + fpi = &mpc8xx_fec_pdata[1]; + fpi->init_ioports = &setup_fec2_ioports; + break; + case fsid_scc3: + fpi = &mpc8xx_scc_pdata; + fpi->init_ioports = &setup_scc3_ioports; + mpc885ads_scc_phy_init(fpi->phy_addr); + break; + default: + printk(KERN_WARNING"Device %s is not supported!\n", pdev->name); + return; + } + + pdev->dev.platform_data = fpi; + fpi->fs_no = fs_no; + + e = (unsigned char *)&bd->bi_enetaddr; + for (i = 0; i < 6; i++) + fpi->macaddr[i] = *e++; + + fpi->macaddr[5 - pdev->id]++; + +} + +static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for FEC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) + return; + mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); +} + +static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev, + int idx) +{ + /* This is for SCC devices only */ + if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) + return; + + mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); +} + +/* SCC ethernet controller does not have MII management channel. FEC1 MII + * channel is used to communicate with the 10Mbit PHY. + */ + +#define MII_ECNTRL_PINMUX 0x4 +#define FEC_ECNTRL_PINMUX 0x00000004 +#define FEC_RCNTRL_MII_MODE 0x00000004 + +/* Make MII read/write commands. + */ +#define mk_mii_write(REG, VAL, PHY_ADDR) (0x50020000 | (((REG) & 0x1f) << 18) | \ + ((VAL) & 0xffff) | ((PHY_ADDR) << 23)) + +static void mpc885ads_scc_phy_init(char phy_addr) +{ + volatile immap_t *immap; + volatile fec_t *fecp; + bd_t *bd; + + bd = (bd_t *) __res; + immap = (immap_t *) IMAP_ADDR; /* pointer to internal registers */ + fecp = &(immap->im_cpm.cp_fec); + + /* Enable MII pins of the FEC1 + */ + setbits16(&immap->im_ioport.iop_pdpar, 0x0080); + clrbits16(&immap->im_ioport.iop_pddir, 0x0080); + /* Set MII speed to 2.5 MHz + */ + out_be32(&fecp->fec_mii_speed, + ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1); + + /* Enable FEC pin MUX + */ + setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); + setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); + + out_be32(&fecp->fec_mii_data, + mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr)); + udelay(100); + out_be32(&fecp->fec_mii_data, + mk_mii_write(MII_ADVERTISE, + ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr)); + udelay(100); + + /* Disable FEC MII settings + */ + clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX); + clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE); + out_be32(&fecp->fec_mii_speed, 0); +} + +static int mpc885ads_platform_notify(struct device *dev) +{ + + static const struct platform_notify_dev_map dev_map[] = { + { + .bus_id = "fsl-cpm-fec", + .rtn = mpc885ads_fixup_fec_enet_pdata, + }, + { + .bus_id = "fsl-cpm-scc", + .rtn = mpc885ads_fixup_scc_enet_pdata, + }, + { + .bus_id = NULL + } + }; + + platform_notify_map(dev_map,dev); + +} + +int __init mpc885ads_init(void) +{ + printk(KERN_NOTICE "mpc885ads: Init\n"); + + platform_notify = mpc885ads_platform_notify; + + ppc_sys_device_initfunc(); + ppc_sys_device_disable_all(); + + ppc_sys_device_enable(MPC8xx_CPM_FEC1); + +#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 + ppc_sys_device_enable(MPC8xx_CPM_SCC1); + +#endif +#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 + ppc_sys_device_enable(MPC8xx_CPM_FEC2); +#endif + + return 0; +} + +arch_initcall(mpc885ads_init); diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c index 108eb182ddd..c717cd92c02 100644 --- a/arch/ppc/platforms/mvme5100.c +++ b/arch/ppc/platforms/mvme5100.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mvme5100.c - * * Board setup routines for the Motorola MVME5100. * * Author: Matt Porter <mporter@mvista.com> diff --git a/arch/ppc/platforms/pal4.h b/arch/ppc/platforms/pal4.h index 641a11a3165..8569c423d88 100644 --- a/arch/ppc/platforms/pal4.h +++ b/arch/ppc/platforms/pal4.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pal4.h - * * Definitions for SBS Palomar IV board * * Author: Dan Cox diff --git a/arch/ppc/platforms/pal4_pci.c b/arch/ppc/platforms/pal4_pci.c index c3b1b757a48..d81ae1c7e1c 100644 --- a/arch/ppc/platforms/pal4_pci.c +++ b/arch/ppc/platforms/pal4_pci.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pal4_pci.c - * * PCI support for SBS Palomar IV * * Author: Dan Cox diff --git a/arch/ppc/platforms/pal4_serial.h b/arch/ppc/platforms/pal4_serial.h index a715c66e1ad..a75343224cf 100644 --- a/arch/ppc/platforms/pal4_serial.h +++ b/arch/ppc/platforms/pal4_serial.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pal4_serial.h - * * Definitions for SBS PalomarIV serial support * * Author: Dan Cox diff --git a/arch/ppc/platforms/pal4_setup.c b/arch/ppc/platforms/pal4_setup.c index f93a3f87193..3c3d881df00 100644 --- a/arch/ppc/platforms/pal4_setup.c +++ b/arch/ppc/platforms/pal4_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pal4_setup.c - * * Board setup routines for the SBS PalomarIV. * * Author: Dan Cox diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c index e6b520e6e13..c3a86be11fb 100644 --- a/arch/ppc/platforms/powerpmc250.c +++ b/arch/ppc/platforms/powerpmc250.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/powerpmc250.c - * * Board setup routines for Force PowerPMC-250 Processor PMC * * Author: Troy Benjegerdes <tbenjegerdes@mvista.com> diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c index 22bd40cfb09..de2761ebe0d 100644 --- a/arch/ppc/platforms/pplus.c +++ b/arch/ppc/platforms/pplus.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pplus.c - * * Board and PCI setup routines for MCG PowerPlus * * Author: Randy Vinson <rvinson@mvista.com> diff --git a/arch/ppc/platforms/pplus.h b/arch/ppc/platforms/pplus.h index 90f0cb2d409..a07cbbdd72c 100644 --- a/arch/ppc/platforms/pplus.h +++ b/arch/ppc/platforms/pplus.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pplus.h - * * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr. * * Author: Mark A. Greerinclude/asm-ppc/hawk.h diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c index 71c9fca1fe9..3365fd788a7 100644 --- a/arch/ppc/platforms/pq2ads.c +++ b/arch/ppc/platforms/pq2ads.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pq2ads.c - * * PQ2ADS platform support * * Author: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h index 067d9a5aebc..6b26dd36c64 100644 --- a/arch/ppc/platforms/pq2ads.h +++ b/arch/ppc/platforms/pq2ads.h @@ -13,6 +13,10 @@ #include <asm/ppcboot.h> +#if defined(CONFIG_ADS8272) +#define BOARD_CHIP_NAME "8272" +#endif + /* Memory map is configured by the PROM startup. * We just map a few things we need. The CSR is actually 4 byte-wide * registers that can be accessed as 8-, 16-, or 32-bit values. diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h new file mode 100644 index 00000000000..8f14a43eafe --- /dev/null +++ b/arch/ppc/platforms/pq2ads_pd.h @@ -0,0 +1,114 @@ +#ifndef __PQ2ADS_PD_H +#define __PQ2ADS_PD_H +/* + * arch/ppc/platforms/82xx/pq2ads_pd.h + * + * Some defines for MPC82xx board-specific PlatformDevice descriptions + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* FCC1 Clock Source Configuration. These can be redefined in the board specific file. + Can only choose from CLK9-12 */ + +#define F1_RXCLK 11 +#define F1_TXCLK 10 + +/* FCC2 Clock Source Configuration. These can be redefined in the board specific file. + Can only choose from CLK13-16 */ +#define F2_RXCLK 15 +#define F2_TXCLK 16 + +/* FCC3 Clock Source Configuration. These can be redefined in the board specific file. + Can only choose from CLK13-16 */ +#define F3_RXCLK 13 +#define F3_TXCLK 14 + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) + +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) + +#endif diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index d0653580200..e86f6156d58 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) @@ -738,7 +736,7 @@ ibm_statusled_progress(char *s, unsigned short hex) hex = 0xfff; if (!notifier_installed) { ++notifier_installed; - notifier_chain_register(&panic_notifier_list, + atomic_notifier_chain_register(&panic_notifier_list, &ibm_statusled_block); } } @@ -1069,15 +1067,13 @@ prep_map_io(void) static int __init prep_request_io(void) { - if (_machine == _MACH_prep) { #ifdef CONFIG_NVRAM - request_region(PREP_NVRAM_AS0, 0x8, "nvram"); + request_region(PREP_NVRAM_AS0, 0x8, "nvram"); #endif - request_region(0x00,0x20,"dma1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xc0,0x20,"dma2"); - } + request_region(0x00,0x20,"dma1"); + request_region(0x40,0x20,"timer"); + request_region(0x80,0x10,"dma page reg"); + request_region(0xc0,0x20,"dma2"); return 0; } diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c index 0bb14a5e824..cdd9cfb13ee 100644 --- a/arch/ppc/platforms/prpmc750.c +++ b/arch/ppc/platforms/prpmc750.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/prpmc750_setup.c - * * Board setup routines for Motorola PrPMC750 * * Author: Matt Porter <mporter@mvista.com> diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c index de7baefacd3..e459a199fb1 100644 --- a/arch/ppc/platforms/prpmc800.c +++ b/arch/ppc/platforms/prpmc800.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/prpmc800.c - * * Author: Dale Farnsworth <dale.farnsworth@mvista.com> * * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c index 872c0a3ba3c..bc26b6d71c1 100644 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ b/arch/ppc/platforms/radstone_ppc7d.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/radstone_ppc7d.c - * * Board setup routines for the Radstone PPC7D boards. * * Author: James Chapman <jchapman@katalix.com> @@ -685,11 +683,10 @@ ppc7d_fixup_i2c_pdata(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (pdata == NULL) { - pdata = kmalloc(sizeof(*pdata), GFP_KERNEL); + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); if (pdata == NULL) return; - memset(pdata, 0, sizeof(*pdata)); pdev->dev.platform_data = pdata; } @@ -712,7 +709,7 @@ ppc7d_fixup_i2c_pdata(struct platform_device *pdev) } #endif -static int __init ppc7d_platform_notify(struct device *dev) +static int ppc7d_platform_notify(struct device *dev) { static struct { char *bus_id; diff --git a/arch/ppc/platforms/radstone_ppc7d.h b/arch/ppc/platforms/radstone_ppc7d.h index 938375510be..2bb093a0c03 100644 --- a/arch/ppc/platforms/radstone_ppc7d.h +++ b/arch/ppc/platforms/radstone_ppc7d.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/radstone_ppc7d.h - * * Board definitions for the Radstone PPC7D boards. * * Author: James Chapman <jchapman@katalix.com> diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c index 9eeed357230..6dc459decb2 100644 --- a/arch/ppc/platforms/sandpoint.c +++ b/arch/ppc/platforms/sandpoint.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/sandpoint_setup.c - * * Board setup routines for the Motorola SPS Sandpoint Test Platform. * * Author: Mark A. Greer diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h index f4e982cb69d..3b64e641848 100644 --- a/arch/ppc/platforms/sandpoint.h +++ b/arch/ppc/platforms/sandpoint.h @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/sandpoint.h - * * Definitions for Motorola SPS Sandpoint Test Platform * * Author: Mark A. Greer diff --git a/arch/ppc/platforms/sbc82xx.c b/arch/ppc/platforms/sbc82xx.c index 74c9ff72c3d..866807b4ad0 100644 --- a/arch/ppc/platforms/sbc82xx.c +++ b/arch/ppc/platforms/sbc82xx.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/sbc82xx.c - * * SBC82XX platform support * * Author: Guy Streeter <streeter@redhat.com> diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c index 69e1de7971f..3783deccd9b 100644 --- a/arch/ppc/platforms/spruce.c +++ b/arch/ppc/platforms/spruce.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/spruce.c - * * Board and PCI setup routines for IBM Spruce * * Author: MontaVista Software <source@mvista.com> diff --git a/arch/ppc/platforms/tqm8260_setup.c b/arch/ppc/platforms/tqm8260_setup.c index 3409139330b..b766339f44a 100644 --- a/arch/ppc/platforms/tqm8260_setup.c +++ b/arch/ppc/platforms/tqm8260_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/tqm8260_setup.c - * * TQM8260 platform support * * Author: Allen Curtis <acurtis@onz.com> diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 159dcd92a6d..490749ca88f 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -17,8 +17,8 @@ obj-$(CONFIG_440GX) += ibm440gx_common.o obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o ifeq ($(CONFIG_4xx),y) -ifeq ($(CONFIG_VIRTEX_II_PRO),y) -obj-$(CONFIG_40x) += xilinx_pic.o +ifeq ($(CONFIG_XILINX_VIRTEX),y) +obj-$(CONFIG_40x) += xilinx_pic.o ppc_sys.o else ifeq ($(CONFIG_403),y) obj-$(CONFIG_40x) += ppc403_pic.o @@ -38,8 +38,6 @@ endif obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \ ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o obj-$(CONFIG_PCI_QSPAN) += qspan_pci.o -obj-$(CONFIG_PPC_OF) += prom_init.o prom.o -obj-$(CONFIG_PPC_CHRP) += open_pic.o obj-$(CONFIG_PPC_PREP) += open_pic.o todc_time.o obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o diff --git a/arch/ppc/syslib/cpc700.h b/arch/ppc/syslib/cpc700.h index f2c00253101..0a8a5d84390 100644 --- a/arch/ppc/syslib/cpc700.h +++ b/arch/ppc/syslib/cpc700.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/cpc700.h - * * Header file for IBM CPC700 Host Bridge, et. al. * * Author: Mark A. Greer diff --git a/arch/ppc/syslib/cpc700_pic.c b/arch/ppc/syslib/cpc700_pic.c index 75fe8eb1069..5add0a919ef 100644 --- a/arch/ppc/syslib/cpc700_pic.c +++ b/arch/ppc/syslib/cpc700_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/cpc700_pic.c - * * Interrupt controller support for IBM Spruce * * Authors: Mark Greer, Matt Porter, and Johnnie Peters diff --git a/arch/ppc/syslib/cpc710.h b/arch/ppc/syslib/cpc710.h index cc0afd80402..5299bf8b5d0 100644 --- a/arch/ppc/syslib/cpc710.h +++ b/arch/ppc/syslib/cpc710.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/cpc710.h - * * Definitions for the IBM CPC710 PCI Host Bridge * * Author: Matt Porter <mporter@mvista.com> diff --git a/arch/ppc/syslib/gen550.h b/arch/ppc/syslib/gen550.h index 039d249e19a..5254d3cdbca 100644 --- a/arch/ppc/syslib/gen550.h +++ b/arch/ppc/syslib/gen550.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/gen550.h - * * gen550 prototypes * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/syslib/gen550_dbg.c b/arch/ppc/syslib/gen550_dbg.c index 9ef0113c83d..9fcff74bfdd 100644 --- a/arch/ppc/syslib/gen550_dbg.c +++ b/arch/ppc/syslib/gen550_dbg.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/gen550_dbg.c - * * A library of polled 16550 serial routines. These are intended to * be used to support progress messages, xmon, kgdb, etc. on a * variety of platforms. diff --git a/arch/ppc/syslib/gen550_kgdb.c b/arch/ppc/syslib/gen550_kgdb.c index 7239d5d7ddc..874078a7664 100644 --- a/arch/ppc/syslib/gen550_kgdb.c +++ b/arch/ppc/syslib/gen550_kgdb.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/gen550_kgdb.c - * * Generic 16550 kgdb support intended to be useful on a variety * of platforms. To enable this support, it is necessary to set * the CONFIG_GEN550 option. Any virtual mapping of the serial diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c index f97b3a9abd1..dc3bd9ecbbf 100644 --- a/arch/ppc/syslib/gt64260_pic.c +++ b/arch/ppc/syslib/gt64260_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/gt64260_pic.c - * * Interrupt controller support for Galileo's GT64260. * * Author: Chris Zankel <source@mvista.com> diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c index a6b3f864579..c1583f48832 100644 --- a/arch/ppc/syslib/harrier.c +++ b/arch/ppc/syslib/harrier.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/harrier.c - * * Motorola MCG Harrier northbridge/memory controller support * * Author: Dale Farnsworth diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c index a9911dc3a82..c5bf16b0d6a 100644 --- a/arch/ppc/syslib/hawk_common.c +++ b/arch/ppc/syslib/hawk_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/hawk_common.c - * * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK. * * Author: Mark A. Greer diff --git a/arch/ppc/syslib/ibm440gp_common.c b/arch/ppc/syslib/ibm440gp_common.c index 0d6be2d6dd6..fbaae5f6d83 100644 --- a/arch/ppc/syslib/ibm440gp_common.c +++ b/arch/ppc/syslib/ibm440gp_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ibm440gp_common.c - * * PPC440GP system library * * Matt Porter <mporter@mvista.com> diff --git a/arch/ppc/syslib/ibm440gp_common.h b/arch/ppc/syslib/ibm440gp_common.h index a054d83cb1a..f48529f3c23 100644 --- a/arch/ppc/syslib/ibm440gp_common.h +++ b/arch/ppc/syslib/ibm440gp_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ibm440gp_common.h - * * PPC440GP system library * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c index c36db279b43..a7dd55f1c63 100644 --- a/arch/ppc/syslib/ibm440gx_common.c +++ b/arch/ppc/syslib/ibm440gx_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ibm440gx_common.c - * * PPC440GX system library * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h index e73aa0411d3..a2ab9fab8e3 100644 --- a/arch/ppc/syslib/ibm440gx_common.h +++ b/arch/ppc/syslib/ibm440gx_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ibm440gx_common.h - * * PPC440GX system library * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c index cdafda127d8..293e4138d17 100644 --- a/arch/ppc/syslib/ibm440sp_common.c +++ b/arch/ppc/syslib/ibm440sp_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ibm440sp_common.c - * * PPC440SP/PPC440SPe system library * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/syslib/ibm440sp_common.h b/arch/ppc/syslib/ibm440sp_common.h index a21a9906dcc..8077bf8ed11 100644 --- a/arch/ppc/syslib/ibm440sp_common.h +++ b/arch/ppc/syslib/ibm440sp_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ibm440sp_common.h - * * PPC440SP system library * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c index 71db11d2215..14a981a5cea 100644 --- a/arch/ppc/syslib/ibm44x_common.c +++ b/arch/ppc/syslib/ibm44x_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ibm44x_common.c - * * PPC44x system library * * Matt Porter <mporter@kernel.crashing.org> diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h index b25a8995e4e..f179db8634e 100644 --- a/arch/ppc/syslib/ibm44x_common.h +++ b/arch/ppc/syslib/ibm44x_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ibm44x_common.h - * * PPC44x system library * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c index 1dc7e4e1d49..99e4bc0e42a 100644 --- a/arch/ppc/syslib/m8260_pci_erratum9.c +++ b/arch/ppc/syslib/m8260_pci_erratum9.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mpc8260_pci9.c - * * Workaround for device erratum PCI 9. * See Motorola's "XPC826xA Family Device Errata Reference." * The erratum applies to all 8260 family Hip4 processors. It is scheduled diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c index 76a2aa4ce65..b7a6cb2d8d5 100644 --- a/arch/ppc/syslib/m8260_setup.c +++ b/arch/ppc/syslib/m8260_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/m8260_setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 688616de3cd..dae9af78bde 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) @@ -34,6 +32,13 @@ #include <linux/seq_file.h> #include <linux/root_dev.h> +#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP) +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#endif + #include <asm/mmu.h> #include <asm/reg.h> #include <asm/residual.h> @@ -49,6 +54,34 @@ #include "ppc8xx_pic.h" +#ifdef CONFIG_MTD_PHYSMAP +#define MPC8xxADS_BANK_WIDTH 4 +#endif + +#define MPC8xxADS_U_BOOT_SIZE 0x80000 +#define MPC8xxADS_FREE_AREA_OFFSET MPC8xxADS_U_BOOT_SIZE + +#if defined(CONFIG_MTD_PARTITIONS) + /* + NOTE: bank width and interleave relative to the installed flash + should have been chosen within MTD_CFI_GEOMETRY options. + */ +static struct mtd_partition mpc8xxads_partitions[] = { + { + .name = "bootloader", + .size = MPC8xxADS_U_BOOT_SIZE, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "User FS", + .offset = MPC8xxADS_FREE_AREA_OFFSET + } +}; + +#define mpc8xxads_part_num (sizeof (mpc8xxads_partitions) / sizeof (mpc8xxads_partitions[0])) + +#endif + static int m8xx_set_rtc_time(unsigned long time); static unsigned long m8xx_get_rtc_time(void); void m8xx_calibrate_decr(void); @@ -71,6 +104,10 @@ board_init(void) void __init m8xx_setup_arch(void) { +#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP) + bd_t *binfo = (bd_t *)__res; +#endif + /* Reset the Communication Processor Module. */ m8xx_cpm_reset(); @@ -106,6 +143,17 @@ m8xx_setup_arch(void) } #endif #endif + +#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS) +#if defined(CONFIG_MTD_PHYSMAP) + physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize, + MPC8xxADS_BANK_WIDTH, NULL); +#ifdef CONFIG_MTD_PARTITIONS + physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num); +#endif /* CONFIG_MTD_PARTITIONS */ +#endif /* CONFIG_MTD_PHYSMAP */ +#endif + board_init(); } @@ -140,9 +188,11 @@ void __init __attribute__ ((weak)) init_internal_rtc(void) { /* Disable the RTC one second and alarm interrupts. */ - out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE)); + clrbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_SIE | RTCSC_ALE)); + /* Enable the RTC */ - out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE)); + setbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_RTF | RTCSC_RTE)); + } /* The decrementer counts at the system (internal) clock frequency divided by @@ -159,8 +209,7 @@ void __init m8xx_calibrate_decr(void) out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, KAPWR_KEY); /* Force all 8xx processors to use divide by 16 processor clock. */ - out_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr, - in_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr)|0x02000000); + setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr, 0x02000000); /* Processor frequency is MHz. * The value 'fp' is the number of decrementer ticks per second. */ @@ -239,8 +288,8 @@ m8xx_restart(char *cmd) __volatile__ unsigned char dummy; local_irq_disable(); - out_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, in_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr) | 0x00000080); + setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, 0x00000080); /* Clear the ME bit in MSR to cause checkstop on machine check */ mtmsr(mfmsr() & ~0x1000); @@ -310,8 +359,8 @@ m8xx_init_IRQ(void) i8259_init(0); /* The i8259 cascade interrupt must be level sensitive. */ - out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel & ~(0x80000000 >> ISA_BRIDGE_INT))); + clrbits32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, (0x80000000 >> ISA_BRIDGE_INT)); if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction)) enable_irq(ISA_BRIDGE_INT); #endif /* CONFIG_PCI */ diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c index df6c9557b86..ac11d7bab44 100644 --- a/arch/ppc/syslib/m8xx_wdt.c +++ b/arch/ppc/syslib/m8xx_wdt.c @@ -41,8 +41,7 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs) m8xx_wdt_reset(); - out_be16(&imap->im_sit.sit_piscr, in_be16(&imap->im_sit.sit_piscr) | PISCR_PS); /* clear irq */ - + setbits16(&imap->im_sit.sit_piscr, PISCR_PS); return IRQ_HANDLED; } diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index 3e039706bdb..2fc7c4150a1 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc10x_common.c - * * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge, * Mem ctlr, EPIC, etc. * diff --git a/arch/ppc/syslib/mpc52xx_devices.c b/arch/ppc/syslib/mpc52xx_devices.c index da3c74bfdc9..7487539a4e9 100644 --- a/arch/ppc/syslib/mpc52xx_devices.c +++ b/arch/ppc/syslib/mpc52xx_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_devices.c - * * Freescale MPC52xx device descriptions * * diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c index 313c96ec7eb..5a5a7a9cd24 100644 --- a/arch/ppc/syslib/mpc52xx_pci.c +++ b/arch/ppc/syslib/mpc52xx_pci.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_pci.c - * * PCI code for the Freescale MPC52xx embedded CPU. * * @@ -227,7 +225,8 @@ mpc52xx_pci_fixup_resources(struct pci_dev *dev) /* The PCI Host bridge of MPC52xx has a prefetch memory resource fixed to 1Gb. Doesn't fit in the resource system so we remove it */ if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) && - (dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200) ) { + ( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200 + || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) { struct resource *res = &dev->resource[1]; res->start = res->end = res->flags = 0; } diff --git a/arch/ppc/syslib/mpc52xx_pci.h b/arch/ppc/syslib/mpc52xx_pci.h index 04b509a0253..77d47dbba85 100644 --- a/arch/ppc/syslib/mpc52xx_pci.h +++ b/arch/ppc/syslib/mpc52xx_pci.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_pci.h - * * PCI Include file the Freescale MPC52xx embedded cpu chips * * diff --git a/arch/ppc/syslib/mpc52xx_pic.c b/arch/ppc/syslib/mpc52xx_pic.c index 4c4497e6251..c4406f9dc6a 100644 --- a/arch/ppc/syslib/mpc52xx_pic.c +++ b/arch/ppc/syslib/mpc52xx_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_pic.c - * * Programmable Interrupt Controller functions for the Freescale MPC52xx * embedded CPU. * diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c index a4a4b02227d..ee6379bb415 100644 --- a/arch/ppc/syslib/mpc52xx_setup.c +++ b/arch/ppc/syslib/mpc52xx_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_setup.c - * * Common code for the boards based on Freescale MPC52xx embedded CPU. * * @@ -26,6 +24,8 @@ #include <asm/pgtable.h> #include <asm/ppcboot.h> +#include <syslib/mpc52xx_pci.h> + extern bd_t __res; static int core_mult[] = { /* CPU Frequency multiplier, taken */ @@ -218,6 +218,52 @@ mpc52xx_calibrate_decr(void) tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000); } + +void __init +mpc52xx_setup_cpu(void) +{ + struct mpc52xx_cdm __iomem *cdm; + struct mpc52xx_xlb __iomem *xlb; + + /* Map zones */ + cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE); + xlb = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE); + + if (!cdm || !xlb) { + printk(KERN_ERR __FILE__ ": " + "Error while mapping CDM/XLB during " + "mpc52xx_setup_cpu\n"); + goto unmap_regs; + } + + /* Use internal 48 Mhz */ + out_8(&cdm->ext_48mhz_en, 0x00); + out_8(&cdm->fd_enable, 0x01); + if (in_be32(&cdm->rstcfg) & 0x40) /* Assumes 33Mhz clock */ + out_be16(&cdm->fd_counters, 0x0001); + else + out_be16(&cdm->fd_counters, 0x5555); + + /* Configure the XLB Arbiter priorities */ + out_be32(&xlb->master_pri_enable, 0xff); + out_be32(&xlb->master_priority, 0x11111111); + + /* Enable ram snooping for 1GB window */ + out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP); + out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d); + + /* Disable XLB pipelining */ + /* (cfr errate 292. We could do this only just before ATA PIO + transaction and re-enable it after ...) */ + out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); + + /* Unmap reg zone */ +unmap_regs: + if (cdm) iounmap(cdm); + if (xlb) iounmap(xlb); +} + + int mpc52xx_match_psc_function(int psc_idx, const char *func) { struct mpc52xx_psc_func *cf = mpc52xx_psc_functions; diff --git a/arch/ppc/syslib/mpc52xx_sys.c b/arch/ppc/syslib/mpc52xx_sys.c index 9a0f90aa8aa..b4e6f978f05 100644 --- a/arch/ppc/syslib/mpc52xx_sys.c +++ b/arch/ppc/syslib/mpc52xx_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc52xx_sys.c - * * Freescale MPC52xx system descriptions * * diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c index f9b95de70e2..1af2c000fcf 100644 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ b/arch/ppc/syslib/mpc83xx_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/83xx/mpc83xx_devices.c - * * MPC83xx Device descriptions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index 82cf3ab77f4..0498ae7e01e 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/83xx/mpc83xx_sys.c - * * MPC83xx System descriptions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c index 00e9b6ff2f6..7735336f5b8 100644 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ b/arch/ppc/syslib/mpc85xx_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_devices.c - * * MPC85xx Device descriptions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c index 397cfbcce5e..d96a93dbcb5 100644 --- a/arch/ppc/syslib/mpc85xx_sys.c +++ b/arch/ppc/syslib/mpc85xx_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/85xx/mpc85xx_sys.c - * * MPC85xx System descriptions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index 92dc98b36bd..bd41ed83beb 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mpc8xx_devices.c - * * MPC8xx Device descriptions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c index d3c61752160..eee21328485 100644 --- a/arch/ppc/syslib/mpc8xx_sys.c +++ b/arch/ppc/syslib/mpc8xx_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/mpc8xx_sys.c - * * MPC8xx System descriptions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c index 58b0aa813e8..5a19697060f 100644 --- a/arch/ppc/syslib/mv64360_pic.c +++ b/arch/ppc/syslib/mv64360_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/mv64360_pic.c - * * Interrupt controller support for Marvell's MV64360. * * Author: Rabeeh Khoury <rabeeh@galileo.co.il> diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c index 1f01b7e2376..3b039c30a43 100644 --- a/arch/ppc/syslib/mv64x60.c +++ b/arch/ppc/syslib/mv64x60.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mv64x60.c - * * Common routines for the Marvell/Galileo Discovery line of host bridges * (gt64260, mv64360, mv64460, ...). * diff --git a/arch/ppc/syslib/mv64x60_dbg.c b/arch/ppc/syslib/mv64x60_dbg.c index fa5b2e45e0c..9cf18764a1a 100644 --- a/arch/ppc/syslib/mv64x60_dbg.c +++ b/arch/ppc/syslib/mv64x60_dbg.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mv64x60_dbg.c - * * KGDB and progress routines for the Marvell/Galileo MV64x60 (Discovery). * * Author: Mark A. Greer <mgreer@mvista.com> diff --git a/arch/ppc/syslib/mv64x60_win.c b/arch/ppc/syslib/mv64x60_win.c index 5b827e2bbe2..4bf1ad17bf1 100644 --- a/arch/ppc/syslib/mv64x60_win.c +++ b/arch/ppc/syslib/mv64x60_win.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/mv64x60_win.c - * * Tables with info on how to manipulate the 32 & 64 bit windows on the * various types of Marvell bridge chips. * diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index 2fe28ded2c6..a4ecc2ee579 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -451,10 +451,9 @@ ocp_driver_init(void) DBG(("ocp: ocp_driver_init()...\n")); /* Allocate/register primary OCP bus */ - ocp_bus = kmalloc(sizeof(struct device), GFP_KERNEL); + ocp_bus = kzalloc(sizeof(struct device), GFP_KERNEL); if (ocp_bus == NULL) return 1; - memset(ocp_bus, 0, sizeof(struct device)); strcpy(ocp_bus->bus_id, "ocp"); bus_register(&ocp_bus_type); diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 894779712b4..70456c8f998 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling - * * Copyright (C) 1997 Geert Uytterhoeven * * This file is subject to the terms and conditions of the GNU General Public @@ -218,7 +216,7 @@ static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask, u_int openpic_read_IPI(volatile u_int __iomem * addr) { u_int val = 0; -#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3) +#if defined(OPENPIC_BIG_ENDIAN) val = in_be32(addr); #else val = in_le32(addr); diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c index 1c40049b9a4..bcbe40de26f 100644 --- a/arch/ppc/syslib/open_pic2.c +++ b/arch/ppc/syslib/open_pic2.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling - * * Copyright (C) 1997 Geert Uytterhoeven * * This file is subject to the terms and conditions of the GNU General Public diff --git a/arch/ppc/syslib/open_pic_defs.h b/arch/ppc/syslib/open_pic_defs.h index 6c94e713146..3a25de7cb57 100644 --- a/arch/ppc/syslib/open_pic_defs.h +++ b/arch/ppc/syslib/open_pic_defs.h @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/open_pic_defs.h -- OpenPIC definitions - * * Copyright (C) 1997 Geert Uytterhoeven * * This file is based on the following documentation: diff --git a/arch/ppc/syslib/pci_auto.c b/arch/ppc/syslib/pci_auto.c index d64207c2a97..ee20a86fcc4 100644 --- a/arch/ppc/syslib/pci_auto.c +++ b/arch/ppc/syslib/pci_auto.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/pci_auto.c - * * PCI autoconfiguration library * * Author: Matt Porter <mporter@mvista.com> diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c index 05ccd598dd4..b40b96a8c60 100644 --- a/arch/ppc/syslib/ppc4xx_dma.c +++ b/arch/ppc/syslib/ppc4xx_dma.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ppc4xx_dma.c - * * IBM PPC4xx DMA engine core library * * Copyright 2000-2004 MontaVista Software Inc. diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c index aa4165144ec..fd9af0fc0e9 100644 --- a/arch/ppc/syslib/ppc4xx_pic.c +++ b/arch/ppc/syslib/ppc4xx_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc4xx_pic.c - * * Interrupt controller driver for PowerPC 4xx-based processors. * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> diff --git a/arch/ppc/syslib/ppc4xx_pm.c b/arch/ppc/syslib/ppc4xx_pm.c deleted file mode 100644 index 60a47920488..00000000000 --- a/arch/ppc/syslib/ppc4xx_pm.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Author: Armin Kuster <akuster@mvista.com> - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * This an attempt to get Power Management going for the IBM 4xx processor. - * This was derived from the ppc4xx._setup.c file - */ - -#include <linux/config.h> -#include <linux/init.h> - -#include <asm/ibm4xx.h> - -void __init -ppc4xx_pm_init(void) -{ - - unsigned int value = 0; - - /* turn off unused hardware to save power */ -#ifdef CONFIG_405GP - value |= CPM_DCP; /* CodePack */ -#endif - -#if !defined(CONFIG_IBM_OCP_GPIO) - value |= CPM_GPIO0; -#endif - -#if !defined(CONFIG_PPC405_I2C_ADAP) - value |= CPM_IIC0; -#ifdef CONFIG_STB03xxx - value |= CPM_IIC1; -#endif -#endif - - -#if !defined(CONFIG_405_DMA) - value |= CPM_DMA; -#endif - - mtdcr(DCRN_CPMFR, value); - -} diff --git a/arch/ppc/syslib/ppc4xx_sgdma.c b/arch/ppc/syslib/ppc4xx_sgdma.c index 9f76e8ee39e..280ea010a9c 100644 --- a/arch/ppc/syslib/ppc4xx_sgdma.c +++ b/arch/ppc/syslib/ppc4xx_sgdma.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/ppc4xx_sgdma.c - * * IBM PPC4xx DMA engine scatter/gather library * * Copyright 2002-2003 MontaVista Software Inc. diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c index 7bada82527a..26afd637dc8 100644 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ b/arch/ppc/syslib/ppc83xx_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc83xx_setup.c - * * MPC83XX common board code * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h index a122a7322e5..478b011cd96 100644 --- a/arch/ppc/syslib/ppc83xx_setup.h +++ b/arch/ppc/syslib/ppc83xx_setup.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc83xx_setup.h - * * MPC83XX common board definitions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c index 19ad537225e..0145c968f9a 100644 --- a/arch/ppc/syslib/ppc85xx_common.c +++ b/arch/ppc/syslib/ppc85xx_common.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc85xx_common.c - * * MPC85xx support routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h index 94edf32151d..182744a1321 100644 --- a/arch/ppc/syslib/ppc85xx_common.h +++ b/arch/ppc/syslib/ppc85xx_common.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc85xx_common.h - * * MPC85xx support routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c index e4dda43fdaa..79b7089d750 100644 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ b/arch/ppc/syslib/ppc85xx_setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc85xx_setup.c - * * MPC85XX common board code * * Maintainer: Kumar Gala <galak@kernel.crashing.org> @@ -237,7 +235,7 @@ mpc85xx_setup_pci2(struct pci_controller *hose) (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1); /* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */ - pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;; + pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff; pci->potear2 = 0x00000000; pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff; /* Enable, IO R/W */ diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h index e340b0545fb..f55b8032d3d 100644 --- a/arch/ppc/syslib/ppc85xx_setup.h +++ b/arch/ppc/syslib/ppc85xx_setup.h @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc85xx_setup.h - * * MPC85XX common board definitions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index c0b93c4191e..60c724e1158 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/ppc_sys.c - * * PPC System library functions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> @@ -15,11 +13,22 @@ */ #include <linux/string.h> +#include <linux/bootmem.h> #include <asm/ppc_sys.h> int (*ppc_sys_device_fixup) (struct platform_device * pdev); static int ppc_sys_inited; +static int ppc_sys_func_inited; + +static const char *ppc_sys_func_names[] = { + [PPC_SYS_FUNC_DUMMY] = "dummy", + [PPC_SYS_FUNC_ETH] = "eth", + [PPC_SYS_FUNC_UART] = "uart", + [PPC_SYS_FUNC_HLDC] = "hldc", + [PPC_SYS_FUNC_USB] = "usb", + [PPC_SYS_FUNC_IRDA] = "irda", +}; void __init identify_ppc_sys_by_id(u32 id) { @@ -38,13 +47,13 @@ void __init identify_ppc_sys_by_id(u32 id) void __init identify_ppc_sys_by_name(char *name) { unsigned int i = 0; - while (ppc_sys_specs[i].ppc_sys_name[0]) - { + while (ppc_sys_specs[i].ppc_sys_name[0]) { if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name)) break; i++; } cur_ppc_sys_spec = &ppc_sys_specs[i]; + return; } @@ -128,6 +137,165 @@ void ppc_sys_device_remove(enum ppc_sys_devices dev) } } +/* Platform-notify mapping + * Helper function for BSP code to assign board-specific platfom-divice bits + */ + +void platform_notify_map(const struct platform_notify_dev_map *map, + struct device *dev) +{ + struct platform_device *pdev; + int len, idx; + const char *s; + + /* do nothing if no device or no bus_id */ + if (!dev || !dev->bus_id) + return; + + /* call per device map */ + while (map->bus_id != NULL) { + idx = -1; + s = strrchr(dev->bus_id, '.'); + if (s != NULL) + idx = (int)simple_strtol(s + 1, NULL, 10); + else + s = dev->bus_id; + + len = s - dev->bus_id; + + if (!strncmp(dev->bus_id, map->bus_id, len)) { + pdev = container_of(dev, struct platform_device, dev); + map->rtn(pdev, idx); + } + map++; + } +} + +/* + Function assignment stuff. + Intended to work as follows: + the device name defined in foo_devices.c will be concatenated with :"func", + where func is string map of respective function from platfom_device_func enum + + The PPC_SYS_FUNC_DUMMY function is intended to remove all assignments, making the device to appear + in platform bus with unmodified name. + */ + +/* + Here we'll replace .name pointers with fixed-lenght strings + Hereby, this should be called *before* any func stuff triggeded. + */ +void ppc_sys_device_initfunc(void) +{ + int i; + const char *name; + static char new_names[NUM_PPC_SYS_DEVS][BUS_ID_SIZE]; + enum ppc_sys_devices cur_dev; + + /* If inited yet, do nothing */ + if (ppc_sys_func_inited) + return; + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + if ((cur_dev = cur_ppc_sys_spec->device_list[i]) < 0) + continue; + + if (ppc_sys_platform_devices[cur_dev].name) { + /*backup name */ + name = ppc_sys_platform_devices[cur_dev].name; + strlcpy(new_names[i], name, BUS_ID_SIZE); + ppc_sys_platform_devices[cur_dev].name = new_names[i]; + } + } + + ppc_sys_func_inited = 1; +} + +/*The "engine" of the func stuff. Here we either concat specified function string description + to the name, or remove it if PPC_SYS_FUNC_DUMMY parameter is passed here*/ +void ppc_sys_device_setfunc(enum ppc_sys_devices dev, + enum platform_device_func func) +{ + char *s; + char *name = (char *)ppc_sys_platform_devices[dev].name; + char tmp[BUS_ID_SIZE]; + + if (!ppc_sys_func_inited) { + printk(KERN_ERR "Unable to alter function - not inited!\n"); + return; + } + + if (ppc_sys_inited) { + platform_device_unregister(&ppc_sys_platform_devices[dev]); + } + + if ((s = (char *)strchr(name, ':')) != NULL) { /* reassign */ + /* Either change the name after ':' or remove func modifications */ + if (func != PPC_SYS_FUNC_DUMMY) + strlcpy(s + 1, ppc_sys_func_names[func], BUS_ID_SIZE); + else + *s = 0; + } else if (func != PPC_SYS_FUNC_DUMMY) { + /* do assignment if it is not just "clear" request */ + sprintf(tmp, "%s:%s", name, ppc_sys_func_names[func]); + strlcpy(name, tmp, BUS_ID_SIZE); + } + + if (ppc_sys_inited) { + platform_device_register(&ppc_sys_platform_devices[dev]); + } +} + +void ppc_sys_device_disable(enum ppc_sys_devices dev) +{ + BUG_ON(cur_ppc_sys_spec == NULL); + + /*Check if it is enabled*/ + if(!(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED)) { + if (ppc_sys_inited) { + platform_device_unregister(&ppc_sys_platform_devices[dev]); + } + cur_ppc_sys_spec->config[dev] |= PPC_SYS_CONFIG_DISABLED; + } +} + +void ppc_sys_device_enable(enum ppc_sys_devices dev) +{ + BUG_ON(cur_ppc_sys_spec == NULL); + + /*Check if it is disabled*/ + if(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED) { + if (ppc_sys_inited) { + platform_device_register(&ppc_sys_platform_devices[dev]); + } + cur_ppc_sys_spec->config[dev] &= ~PPC_SYS_CONFIG_DISABLED; + } + +} + +void ppc_sys_device_enable_all(void) +{ + enum ppc_sys_devices cur_dev; + int i; + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + cur_dev = cur_ppc_sys_spec->device_list[i]; + ppc_sys_device_enable(cur_dev); + } +} + +void ppc_sys_device_disable_all(void) +{ + enum ppc_sys_devices cur_dev; + int i; + + for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { + cur_dev = cur_ppc_sys_spec->device_list[i]; + ppc_sys_device_disable(cur_dev); + } +} + + static int __init ppc_sys_init(void) { unsigned int i, dev_id, ret = 0; @@ -136,7 +304,8 @@ static int __init ppc_sys_init(void) for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) { dev_id = cur_ppc_sys_spec->device_list[i]; - if (dev_id != -1) { + if ((dev_id != -1) && + !(cur_ppc_sys_spec->config[dev_id] & PPC_SYS_CONFIG_DISABLED)) { if (ppc_sys_device_fixup != NULL) ppc_sys_device_fixup(&ppc_sys_platform_devices [dev_id]); diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c index 6ff3aab82fc..0636aed7b82 100644 --- a/arch/ppc/syslib/pq2_devices.c +++ b/arch/ppc/syslib/pq2_devices.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/pq2_devices.c - * * PQ2 Device descriptions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index 36d6e217994..75e64f1c144 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/pq2_devices.c - * * PQ2 System descriptions * * Maintainer: Kumar Gala <galak@kernel.crashing.org> diff --git a/arch/ppc/syslib/prep_nvram.c b/arch/ppc/syslib/prep_nvram.c index 2c6364d9641..474dccbc4a8 100644 --- a/arch/ppc/syslib/prep_nvram.c +++ b/arch/ppc/syslib/prep_nvram.c @@ -1,6 +1,4 @@ /* - * arch/ppc/kernel/prep_nvram.c - * * Copyright (C) 1998 Corey Minyard * * This reads the NvRAM on PReP compliant machines (generally from IBM or diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c deleted file mode 100644 index 482f837fd37..00000000000 --- a/arch/ppc/syslib/prom.c +++ /dev/null @@ -1,1429 +0,0 @@ -/* - * Procedures for interfacing to the Open Firmware PROM on - * Power Macintosh computers. - * - * In particular, we are interested in the device tree - * and in using some of its services (exit, write to stdout). - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - */ -#include <stdarg.h> -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/bitops.h> - -#include <asm/sections.h> -#include <asm/prom.h> -#include <asm/page.h> -#include <asm/processor.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/bootx.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/bootinfo.h> -#include <asm/btext.h> -#include <asm/pci-bridge.h> -#include <asm/open_pic.h> - - -struct pci_address { - unsigned a_hi; - unsigned a_mid; - unsigned a_lo; -}; - -struct pci_reg_property { - struct pci_address addr; - unsigned size_hi; - unsigned size_lo; -}; - -struct isa_reg_property { - unsigned space; - unsigned address; - unsigned size; -}; - -typedef unsigned long interpret_func(struct device_node *, unsigned long, - int, int); -static interpret_func interpret_pci_props; -static interpret_func interpret_dbdma_props; -static interpret_func interpret_isa_props; -static interpret_func interpret_macio_props; -static interpret_func interpret_root_props; - -extern char *klimit; - -/* Set for a newworld or CHRP machine */ -int use_of_interrupt_tree; -struct device_node *dflt_interrupt_controller; -int num_interrupt_controllers; - -extern unsigned int rtas_entry; /* physical pointer */ - -extern struct device_node *allnodes; - -static unsigned long finish_node(struct device_node *, unsigned long, - interpret_func *, int, int); -static unsigned long finish_node_interrupts(struct device_node *, unsigned long); -static struct device_node *find_phandle(phandle); - -extern void enter_rtas(void *); -void phys_call_rtas(int, int, int, ...); - -extern char cmd_line[512]; /* XXX */ -extern boot_infos_t *boot_infos; -unsigned long dev_tree_size; - -void -phys_call_rtas(int service, int nargs, int nret, ...) -{ - va_list list; - union { - unsigned long words[16]; - double align; - } u; - void (*rtas)(void *, unsigned long); - int i; - - u.words[0] = service; - u.words[1] = nargs; - u.words[2] = nret; - va_start(list, nret); - for (i = 0; i < nargs; ++i) - u.words[i+3] = va_arg(list, unsigned long); - va_end(list); - - rtas = (void (*)(void *, unsigned long)) rtas_entry; - rtas(&u, rtas_data); -} - -/* - * finish_device_tree is called once things are running normally - * (i.e. with text and data mapped to the address they were linked at). - * It traverses the device tree and fills in the name, type, - * {n_}addrs and {n_}intrs fields of each node. - */ -void __init -finish_device_tree(void) -{ - unsigned long mem = (unsigned long) klimit; - struct device_node *np; - - /* All CHRPs now use the interrupt tree */ - for (np = allnodes; np != NULL; np = np->allnext) { - if (get_property(np, "interrupt-parent", NULL)) { - use_of_interrupt_tree = 1; - break; - } - } - - if (use_of_interrupt_tree) { - /* - * We want to find out here how many interrupt-controller - * nodes there are, and if we are booted from BootX, - * we need a pointer to the first (and hopefully only) - * such node. But we can't use find_devices here since - * np->name has not been set yet. -- paulus - */ - int n = 0; - char *name, *ic; - int iclen; - - for (np = allnodes; np != NULL; np = np->allnext) { - ic = get_property(np, "interrupt-controller", &iclen); - name = get_property(np, "name", NULL); - /* checking iclen makes sure we don't get a false - match on /chosen.interrupt_controller */ - if ((name != NULL - && strcmp(name, "interrupt-controller") == 0) - || (ic != NULL && iclen == 0 && strcmp(name, "AppleKiwi"))) { - if (n == 0) - dflt_interrupt_controller = np; - ++n; - } - } - num_interrupt_controllers = n; - } - - mem = finish_node(allnodes, mem, NULL, 1, 1); - dev_tree_size = mem - (unsigned long) allnodes; - klimit = (char *) mem; -} - -static unsigned long __init -finish_node(struct device_node *np, unsigned long mem_start, - interpret_func *ifunc, int naddrc, int nsizec) -{ - struct device_node *child; - int *ip; - - np->name = get_property(np, "name", NULL); - np->type = get_property(np, "device_type", NULL); - - if (!np->name) - np->name = "<NULL>"; - if (!np->type) - np->type = "<NULL>"; - - /* get the device addresses and interrupts */ - if (ifunc != NULL) - mem_start = ifunc(np, mem_start, naddrc, nsizec); - - if (use_of_interrupt_tree) - mem_start = finish_node_interrupts(np, mem_start); - - /* Look for #address-cells and #size-cells properties. */ - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - naddrc = *ip; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - nsizec = *ip; - - if (np->parent == NULL) - ifunc = interpret_root_props; - else if (np->type == 0) - ifunc = NULL; - else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci")) - ifunc = interpret_pci_props; - else if (!strcmp(np->type, "dbdma")) - ifunc = interpret_dbdma_props; - else if (!strcmp(np->type, "mac-io") - || ifunc == interpret_macio_props) - ifunc = interpret_macio_props; - else if (!strcmp(np->type, "isa")) - ifunc = interpret_isa_props; - else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3")) - ifunc = interpret_root_props; - else if (!((ifunc == interpret_dbdma_props - || ifunc == interpret_macio_props) - && (!strcmp(np->type, "escc") - || !strcmp(np->type, "media-bay")))) - ifunc = NULL; - - /* if we were booted from BootX, convert the full name */ - if (boot_infos - && strncmp(np->full_name, "Devices:device-tree", 19) == 0) { - if (np->full_name[19] == 0) { - strcpy(np->full_name, "/"); - } else if (np->full_name[19] == ':') { - char *p = np->full_name + 19; - np->full_name = p; - for (; *p; ++p) - if (*p == ':') - *p = '/'; - } - } - - for (child = np->child; child != NULL; child = child->sibling) - mem_start = finish_node(child, mem_start, ifunc, - naddrc, nsizec); - - return mem_start; -} - -/* - * Find the interrupt parent of a node. - */ -static struct device_node * __init -intr_parent(struct device_node *p) -{ - phandle *parp; - - parp = (phandle *) get_property(p, "interrupt-parent", NULL); - if (parp == NULL) - return p->parent; - p = find_phandle(*parp); - if (p != NULL) - return p; - /* - * On a powermac booted with BootX, we don't get to know the - * phandles for any nodes, so find_phandle will return NULL. - * Fortunately these machines only have one interrupt controller - * so there isn't in fact any ambiguity. -- paulus - */ - if (num_interrupt_controllers == 1) - p = dflt_interrupt_controller; - return p; -} - -/* - * Find out the size of each entry of the interrupts property - * for a node. - */ -static int __init -prom_n_intr_cells(struct device_node *np) -{ - struct device_node *p; - unsigned int *icp; - - for (p = np; (p = intr_parent(p)) != NULL; ) { - icp = (unsigned int *) - get_property(p, "#interrupt-cells", NULL); - if (icp != NULL) - return *icp; - if (get_property(p, "interrupt-controller", NULL) != NULL - || get_property(p, "interrupt-map", NULL) != NULL) { - printk("oops, node %s doesn't have #interrupt-cells\n", - p->full_name); - return 1; - } - } - printk("prom_n_intr_cells failed for %s\n", np->full_name); - return 1; -} - -/* - * Map an interrupt from a device up to the platform interrupt - * descriptor. - */ -static int __init -map_interrupt(unsigned int **irq, struct device_node **ictrler, - struct device_node *np, unsigned int *ints, int nintrc) -{ - struct device_node *p, *ipar; - unsigned int *imap, *imask, *ip; - int i, imaplen, match; - int newintrc = 1, newaddrc = 1; - unsigned int *reg; - int naddrc; - - reg = (unsigned int *) get_property(np, "reg", NULL); - naddrc = prom_n_addr_cells(np); - p = intr_parent(np); - while (p != NULL) { - if (get_property(p, "interrupt-controller", NULL) != NULL) - /* this node is an interrupt controller, stop here */ - break; - imap = (unsigned int *) - get_property(p, "interrupt-map", &imaplen); - if (imap == NULL) { - p = intr_parent(p); - continue; - } - imask = (unsigned int *) - get_property(p, "interrupt-map-mask", NULL); - if (imask == NULL) { - printk("oops, %s has interrupt-map but no mask\n", - p->full_name); - return 0; - } - imaplen /= sizeof(unsigned int); - match = 0; - ipar = NULL; - while (imaplen > 0 && !match) { - /* check the child-interrupt field */ - match = 1; - for (i = 0; i < naddrc && match; ++i) - match = ((reg[i] ^ imap[i]) & imask[i]) == 0; - for (; i < naddrc + nintrc && match; ++i) - match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0; - imap += naddrc + nintrc; - imaplen -= naddrc + nintrc; - /* grab the interrupt parent */ - ipar = find_phandle((phandle) *imap++); - --imaplen; - if (ipar == NULL && num_interrupt_controllers == 1) - /* cope with BootX not giving us phandles */ - ipar = dflt_interrupt_controller; - if (ipar == NULL) { - printk("oops, no int parent %x in map of %s\n", - imap[-1], p->full_name); - return 0; - } - /* find the parent's # addr and intr cells */ - ip = (unsigned int *) - get_property(ipar, "#interrupt-cells", NULL); - if (ip == NULL) { - printk("oops, no #interrupt-cells on %s\n", - ipar->full_name); - return 0; - } - newintrc = *ip; - ip = (unsigned int *) - get_property(ipar, "#address-cells", NULL); - newaddrc = (ip == NULL)? 0: *ip; - imap += newaddrc + newintrc; - imaplen -= newaddrc + newintrc; - } - if (imaplen < 0) { - printk("oops, error decoding int-map on %s, len=%d\n", - p->full_name, imaplen); - return 0; - } - if (!match) { - printk("oops, no match in %s int-map for %s\n", - p->full_name, np->full_name); - return 0; - } - p = ipar; - naddrc = newaddrc; - nintrc = newintrc; - ints = imap - nintrc; - reg = ints - naddrc; - } - if (p == NULL) - printk("hmmm, int tree for %s doesn't have ctrler\n", - np->full_name); - *irq = ints; - *ictrler = p; - return nintrc; -} - -/* - * New version of finish_node_interrupts. - */ -static unsigned long __init -finish_node_interrupts(struct device_node *np, unsigned long mem_start) -{ - unsigned int *ints; - int intlen, intrcells; - int i, j, n, offset; - unsigned int *irq; - struct device_node *ic; - - ints = (unsigned int *) get_property(np, "interrupts", &intlen); - if (ints == NULL) - return mem_start; - intrcells = prom_n_intr_cells(np); - intlen /= intrcells * sizeof(unsigned int); - np->n_intrs = intlen; - np->intrs = (struct interrupt_info *) mem_start; - mem_start += intlen * sizeof(struct interrupt_info); - - for (i = 0; i < intlen; ++i) { - np->intrs[i].line = 0; - np->intrs[i].sense = 1; - n = map_interrupt(&irq, &ic, np, ints, intrcells); - if (n <= 0) - continue; - offset = 0; - /* - * On a CHRP we have an 8259 which is subordinate to - * the openpic in the interrupt tree, but we want the - * openpic's interrupt numbers offsetted, not the 8259's. - * So we apply the offset if the controller is at the - * root of the interrupt tree, i.e. has no interrupt-parent. - * This doesn't cope with the general case of multiple - * cascaded interrupt controllers, but then neither will - * irq.c at the moment either. -- paulus - * The G5 triggers that code, I add a machine test. On - * those machines, we want to offset interrupts from the - * second openpic by 128 -- BenH - */ - if (num_interrupt_controllers > 1 - && ic != NULL - && get_property(ic, "interrupt-parent", NULL) == NULL) - offset = 16; - - np->intrs[i].line = irq[0] + offset; - if (n > 1) - np->intrs[i].sense = irq[1]; - if (n > 2) { - printk("hmmm, got %d intr cells for %s:", n, - np->full_name); - for (j = 0; j < n; ++j) - printk(" %d", irq[j]); - printk("\n"); - } - ints += intrcells; - } - - return mem_start; -} - -/* - * When BootX makes a copy of the device tree from the MacOS - * Name Registry, it is in the format we use but all of the pointers - * are offsets from the start of the tree. - * This procedure updates the pointers. - */ -void __init -relocate_nodes(void) -{ - unsigned long base; - struct device_node *np; - struct property *pp; - -#define ADDBASE(x) (x = (typeof (x))((x)? ((unsigned long)(x) + base): 0)) - - base = (unsigned long) boot_infos + boot_infos->deviceTreeOffset; - allnodes = (struct device_node *)(base + 4); - for (np = allnodes; np != 0; np = np->allnext) { - ADDBASE(np->full_name); - ADDBASE(np->properties); - ADDBASE(np->parent); - ADDBASE(np->child); - ADDBASE(np->sibling); - ADDBASE(np->allnext); - for (pp = np->properties; pp != 0; pp = pp->next) { - ADDBASE(pp->name); - ADDBASE(pp->value); - ADDBASE(pp->next); - } - } -} - -int -prom_n_addr_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #address-cells property for the root node, default to 1 */ - return 1; -} - -int -prom_n_size_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #size-cells property for the root node, default to 1 */ - return 1; -} - -static unsigned long __init -map_addr(struct device_node *np, unsigned long space, unsigned long addr) -{ - int na; - unsigned int *ranges; - int rlen = 0; - unsigned int type; - - type = (space >> 24) & 3; - if (type == 0) - return addr; - - while ((np = np->parent) != NULL) { - if (strcmp(np->type, "pci") != 0) - continue; - /* PCI bridge: map the address through the ranges property */ - na = prom_n_addr_cells(np); - ranges = (unsigned int *) get_property(np, "ranges", &rlen); - while ((rlen -= (na + 5) * sizeof(unsigned int)) >= 0) { - if (((ranges[0] >> 24) & 3) == type - && ranges[2] <= addr - && addr - ranges[2] < ranges[na+4]) { - /* ok, this matches, translate it */ - addr += ranges[na+2] - ranges[2]; - break; - } - ranges += na + 5; - } - } - return addr; -} - -static unsigned long __init -interpret_pci_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct address_range *adr; - struct pci_reg_property *pci_addrs; - int i, l, *ip; - - pci_addrs = (struct pci_reg_property *) - get_property(np, "assigned-addresses", &l); - if (pci_addrs != 0 && l >= sizeof(struct pci_reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct pci_reg_property)) >= 0) { - adr[i].space = pci_addrs[i].addr.a_hi; - adr[i].address = map_addr(np, pci_addrs[i].addr.a_hi, - pci_addrs[i].addr.a_lo); - adr[i].size = pci_addrs[i].size_lo; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip == 0 && np->parent) - ip = (int *) get_property(np->parent, "AAPL,interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - } - - return mem_start; -} - -static unsigned long __init -interpret_dbdma_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct reg_property *rp; - struct address_range *adr; - unsigned long base_address; - int i, l, *ip; - struct device_node *db; - - base_address = 0; - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - - rp = (struct reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct reg_property)) >= 0) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - } - - return mem_start; -} - -static unsigned long __init -interpret_macio_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct reg_property *rp; - struct address_range *adr; - unsigned long base_address; - int i, l, *ip; - struct device_node *db; - - base_address = 0; - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - - rp = (struct reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct reg_property)) >= 0) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - mem_start += np->n_intrs * sizeof(struct interrupt_info); - } - - return mem_start; -} - -static unsigned long __init -interpret_isa_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct isa_reg_property *rp; - struct address_range *adr; - int i, l, *ip; - - rp = (struct isa_reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct isa_reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct reg_property)) >= 0) { - adr[i].space = rp[i].space; - adr[i].address = rp[i].address - + (adr[i].space? 0: _ISA_MEM_BASE); - adr[i].size = rp[i].size; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / (2 * sizeof(int)); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = *ip++; - } - } - - return mem_start; -} - -static unsigned long __init -interpret_root_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct address_range *adr; - int i, l, *ip; - unsigned int *rp; - int rpsize = (naddrc + nsizec) * sizeof(unsigned int); - - rp = (unsigned int *) get_property(np, "reg", &l); - if (rp != 0 && l >= rpsize) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= rpsize) >= 0) { - adr[i].space = (naddrc >= 2? rp[naddrc-2]: 2); - adr[i].address = rp[naddrc - 1]; - adr[i].size = rp[naddrc + nsizec - 1]; - ++i; - rp += naddrc + nsizec; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - } - - return mem_start; -} - -/* - * Work out the sense (active-low level / active-high edge) - * of each interrupt from the device tree. - */ -void __init -prom_get_irq_senses(unsigned char *senses, int off, int max) -{ - struct device_node *np; - int i, j; - - /* default to level-triggered */ - memset(senses, 1, max - off); - if (!use_of_interrupt_tree) - return; - - for (np = allnodes; np != 0; np = np->allnext) { - for (j = 0; j < np->n_intrs; j++) { - i = np->intrs[j].line; - if (i >= off && i < max) { - if (np->intrs[j].sense == 1) - senses[i-off] = (IRQ_SENSE_LEVEL - | IRQ_POLARITY_NEGATIVE); - else - senses[i-off] = (IRQ_SENSE_EDGE - | IRQ_POLARITY_POSITIVE); - } - } - } -} - -/* - * Construct and return a list of the device_nodes with a given name. - */ -struct device_node * -find_devices(const char *name) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->name != 0 && strcasecmp(np->name, name) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} - -/* - * Construct and return a list of the device_nodes with a given type. - */ -struct device_node * -find_type_devices(const char *type) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->type != 0 && strcasecmp(np->type, type) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} - -/* - * Returns all nodes linked together - */ -struct device_node * -find_all_nodes(void) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - *prevp = np; - prevp = &np->next; - } - *prevp = NULL; - return head; -} - -/* Checks if the given "compat" string matches one of the strings in - * the device's "compatible" property - */ -int -device_is_compatible(struct device_node *device, const char *compat) -{ - const char* cp; - int cplen, l; - - cp = (char *) get_property(device, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncasecmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} - - -/* - * Indicates whether the root node has a given value in its - * compatible property. - */ -int -machine_is_compatible(const char *compat) -{ - struct device_node *root; - - root = find_path_device("/"); - if (root == 0) - return 0; - return device_is_compatible(root, compat); -} - -/* - * Construct and return a list of the device_nodes with a given type - * and compatible property. - */ -struct device_node * -find_compatible_devices(const char *type, const char *compat) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compat)) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} - -/* - * Find the device_node with a given full_name. - */ -struct device_node * -find_path_device(const char *path) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - return np; - return NULL; -} - -/******* - * - * New implementation of the OF "find" APIs, return a refcounted - * object, call of_node_put() when done. Currently, still lacks - * locking as old implementation, this is beeing done for ppc64. - * - * Note that property management will need some locking as well, - * this isn't dealt with yet - * - *******/ - -/** - * of_find_node_by_name - Find a node by it's "name" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The name string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_name(struct device_node *from, - const char *name) -{ - struct device_node *np = from ? from->allnext : allnodes; - - for (; np != 0; np = np->allnext) - if (np->name != 0 && strcasecmp(np->name, name) == 0) - break; - if (from) - of_node_put(from); - return of_node_get(np); -} - -/** - * of_find_node_by_type - Find a node by it's "device_type" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The type string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_type(struct device_node *from, - const char *type) -{ - struct device_node *np = from ? from->allnext : allnodes; - - for (; np != 0; np = np->allnext) - if (np->type != 0 && strcasecmp(np->type, type) == 0) - break; - if (from) - of_node_put(from); - return of_node_get(np); -} - -/** - * of_find_compatible_node - Find a node based on type and one of the - * tokens in it's "compatible" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @type: The type string to match "device_type" or NULL to ignore - * @compatible: The string to match to one of the tokens in the device - * "compatible" list. - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compatible) -{ - struct device_node *np = from ? from->allnext : allnodes; - - for (; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compatible)) - break; - } - if (from) - of_node_put(from); - return of_node_get(np); -} - -/** - * of_find_node_by_path - Find a node matching a full OF path - * @path: The full path to match - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_path(const char *path) -{ - struct device_node *np = allnodes; - - for (; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - break; - return of_node_get(np); -} - -/** - * of_find_all_nodes - Get next node in global list - * @prev: Previous node or NULL to start iteration - * of_node_put() will be called on it - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_all_nodes(struct device_node *prev) -{ - return of_node_get(prev ? prev->allnext : allnodes); -} - -/** - * of_get_parent - Get a node's parent if any - * @node: Node to get parent - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_parent(const struct device_node *node) -{ - return node ? of_node_get(node->parent) : NULL; -} - -/** - * of_get_next_child - Iterate a node childs - * @node: parent node - * @prev: previous child of the parent node, or NULL to get first - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev) -{ - struct device_node *next = prev ? prev->sibling : node->child; - - for (; next != 0; next = next->sibling) - if (of_node_get(next)) - break; - if (prev) - of_node_put(prev); - return next; -} - -/** - * of_node_get - Increment refcount of a node - * @node: Node to inc refcount, NULL is supported to - * simplify writing of callers - * - * Returns the node itself or NULL if gone. Current implementation - * does nothing as we don't yet do dynamic node allocation on ppc32 - */ -struct device_node *of_node_get(struct device_node *node) -{ - return node; -} - -/** - * of_node_put - Decrement refcount of a node - * @node: Node to dec refcount, NULL is supported to - * simplify writing of callers - * - * Current implementation does nothing as we don't yet do dynamic node - * allocation on ppc32 - */ -void of_node_put(struct device_node *node) -{ -} - -/* - * Find the device_node with a given phandle. - */ -static struct device_node * __init -find_phandle(phandle ph) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->node == ph) - return np; - return NULL; -} - -/* - * Find a property with a given name for a given node - * and return the value. - */ -unsigned char * -get_property(struct device_node *np, const char *name, int *lenp) -{ - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) - if (pp->name != NULL && strcmp(pp->name, name) == 0) { - if (lenp != 0) - *lenp = pp->length; - return pp->value; - } - return NULL; -} - -/* - * Add a property to a node - */ -int -prom_add_property(struct device_node* np, struct property* prop) -{ - struct property **next = &np->properties; - - prop->next = NULL; - while (*next) - next = &(*next)->next; - *next = prop; - - return 0; -} - -/* I quickly hacked that one, check against spec ! */ -static inline unsigned long -bus_space_to_resource_flags(unsigned int bus_space) -{ - u8 space = (bus_space >> 24) & 0xf; - if (space == 0) - space = 0x02; - if (space == 0x02) - return IORESOURCE_MEM; - else if (space == 0x01) - return IORESOURCE_IO; - else { - printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n", - bus_space); - return 0; - } -} - -static struct resource* -find_parent_pci_resource(struct pci_dev* pdev, struct address_range *range) -{ - unsigned long mask; - int i; - - /* Check this one */ - mask = bus_space_to_resource_flags(range->space); - for (i=0; i<DEVICE_COUNT_RESOURCE; i++) { - if ((pdev->resource[i].flags & mask) == mask && - pdev->resource[i].start <= range->address && - pdev->resource[i].end > range->address) { - if ((range->address + range->size - 1) > pdev->resource[i].end) { - /* Add better message */ - printk(KERN_WARNING "PCI/OF resource overlap !\n"); - return NULL; - } - break; - } - } - if (i == DEVICE_COUNT_RESOURCE) - return NULL; - return &pdev->resource[i]; -} - -/* - * Request an OF device resource. Currently handles child of PCI devices, - * or other nodes attached to the root node. Ultimately, put some - * link to resources in the OF node. - */ -struct resource* -request_OF_resource(struct device_node* node, int index, const char* name_postfix) -{ - struct pci_dev* pcidev; - u8 pci_bus, pci_devfn; - unsigned long iomask; - struct device_node* nd; - struct resource* parent; - struct resource *res = NULL; - int nlen, plen; - - if (index >= node->n_addrs) - goto fail; - - /* Sanity check on bus space */ - iomask = bus_space_to_resource_flags(node->addrs[index].space); - if (iomask & IORESOURCE_MEM) - parent = &iomem_resource; - else if (iomask & IORESOURCE_IO) - parent = &ioport_resource; - else - goto fail; - - /* Find a PCI parent if any */ - nd = node; - pcidev = NULL; - while(nd) { - if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn)) - pcidev = pci_find_slot(pci_bus, pci_devfn); - if (pcidev) break; - nd = nd->parent; - } - if (pcidev) - parent = find_parent_pci_resource(pcidev, &node->addrs[index]); - if (!parent) { - printk(KERN_WARNING "request_OF_resource(%s), parent not found\n", - node->name); - goto fail; - } - - res = __request_region(parent, node->addrs[index].address, node->addrs[index].size, NULL); - if (!res) - goto fail; - nlen = strlen(node->name); - plen = name_postfix ? strlen(name_postfix) : 0; - res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL); - if (res->name) { - strcpy((char *)res->name, node->name); - if (plen) - strcpy((char *)res->name+nlen, name_postfix); - } - return res; -fail: - return NULL; -} - -int -release_OF_resource(struct device_node* node, int index) -{ - struct pci_dev* pcidev; - u8 pci_bus, pci_devfn; - unsigned long iomask, start, end; - struct device_node* nd; - struct resource* parent; - struct resource *res = NULL; - - if (index >= node->n_addrs) - return -EINVAL; - - /* Sanity check on bus space */ - iomask = bus_space_to_resource_flags(node->addrs[index].space); - if (iomask & IORESOURCE_MEM) - parent = &iomem_resource; - else if (iomask & IORESOURCE_IO) - parent = &ioport_resource; - else - return -EINVAL; - - /* Find a PCI parent if any */ - nd = node; - pcidev = NULL; - while(nd) { - if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn)) - pcidev = pci_find_slot(pci_bus, pci_devfn); - if (pcidev) break; - nd = nd->parent; - } - if (pcidev) - parent = find_parent_pci_resource(pcidev, &node->addrs[index]); - if (!parent) { - printk(KERN_WARNING "release_OF_resource(%s), parent not found\n", - node->name); - return -ENODEV; - } - - /* Find us in the parent and its childs */ - res = parent->child; - start = node->addrs[index].address; - end = start + node->addrs[index].size - 1; - while (res) { - if (res->start == start && res->end == end && - (res->flags & IORESOURCE_BUSY)) - break; - if (res->start <= start && res->end >= end) - res = res->child; - else - res = res->sibling; - } - if (!res) - return -ENODEV; - - kfree(res->name); - res->name = NULL; - release_resource(res); - kfree(res); - - return 0; -} - -#if 0 -void -print_properties(struct device_node *np) -{ - struct property *pp; - char *cp; - int i, n; - - for (pp = np->properties; pp != 0; pp = pp->next) { - printk(KERN_INFO "%s", pp->name); - for (i = strlen(pp->name); i < 16; ++i) - printk(" "); - cp = (char *) pp->value; - for (i = pp->length; i > 0; --i, ++cp) - if ((i > 1 && (*cp < 0x20 || *cp > 0x7e)) - || (i == 1 && *cp != 0)) - break; - if (i == 0 && pp->length > 1) { - /* looks like a string */ - printk(" %s\n", (char *) pp->value); - } else { - /* dump it in hex */ - n = pp->length; - if (n > 64) - n = 64; - if (pp->length % 4 == 0) { - unsigned int *p = (unsigned int *) pp->value; - - n /= 4; - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 4) == 0) - printk("\n "); - printk(" %08x", *p++); - } - } else { - unsigned char *bp = pp->value; - - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 16) == 0) - printk("\n "); - printk(" %02x", *bp++); - } - } - printk("\n"); - if (pp->length > 64) - printk(" ... (length = %d)\n", - pp->length); - } - } -} -#endif - -static DEFINE_SPINLOCK(rtas_lock); - -/* this can be called after setup -- Cort */ -int -call_rtas(const char *service, int nargs, int nret, - unsigned long *outputs, ...) -{ - va_list list; - int i; - unsigned long s; - struct device_node *rtas; - int *tokp; - union { - unsigned long words[16]; - double align; - } u; - - rtas = find_devices("rtas"); - if (rtas == NULL) - return -1; - tokp = (int *) get_property(rtas, service, NULL); - if (tokp == NULL) { - printk(KERN_ERR "No RTAS service called %s\n", service); - return -1; - } - u.words[0] = *tokp; - u.words[1] = nargs; - u.words[2] = nret; - va_start(list, outputs); - for (i = 0; i < nargs; ++i) - u.words[i+3] = va_arg(list, unsigned long); - va_end(list); - - /* - * RTAS doesn't use floating point. - * Or at least, according to the CHRP spec we enter RTAS - * with FP disabled, and it doesn't change the FP registers. - * -- paulus. - */ - spin_lock_irqsave(&rtas_lock, s); - enter_rtas((void *)__pa(&u)); - spin_unlock_irqrestore(&rtas_lock, s); - - if (nret > 1 && outputs != NULL) - for (i = 0; i < nret-1; ++i) - outputs[i] = u.words[i+nargs+4]; - return u.words[nargs+3]; -} diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c deleted file mode 100644 index df14422ae1c..00000000000 --- a/arch/ppc/syslib/prom_init.c +++ /dev/null @@ -1,1011 +0,0 @@ -/* - * Note that prom_init() and anything called from prom_init() - * may be running at an address that is different from the address - * that it was linked at. References to static data items are - * handled by compiling this file with -mrelocatable-lib. - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/bitops.h> - -#include <asm/sections.h> -#include <asm/prom.h> -#include <asm/page.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/bootx.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/bootinfo.h> -#include <asm/btext.h> -#include <asm/pci-bridge.h> -#include <asm/open_pic.h> -#include <asm/cacheflush.h> - -#ifdef CONFIG_LOGO_LINUX_CLUT224 -#include <linux/linux_logo.h> -extern const struct linux_logo logo_linux_clut224; -#endif - -/* - * Properties whose value is longer than this get excluded from our - * copy of the device tree. This way we don't waste space storing - * things like "driver,AAPL,MacOS,PowerPC" properties. But this value - * does need to be big enough to ensure that we don't lose things - * like the interrupt-map property on a PCI-PCI bridge. - */ -#define MAX_PROPERTY_LENGTH 4096 - -#ifndef FB_MAX /* avoid pulling in all of the fb stuff */ -#define FB_MAX 8 -#endif - -#define ALIGNUL(x) (((x) + sizeof(unsigned long)-1) & -sizeof(unsigned long)) - -typedef u32 prom_arg_t; - -struct prom_args { - const char *service; - int nargs; - int nret; - prom_arg_t args[10]; -}; - -struct pci_address { - unsigned a_hi; - unsigned a_mid; - unsigned a_lo; -}; - -struct pci_reg_property { - struct pci_address addr; - unsigned size_hi; - unsigned size_lo; -}; - -struct pci_range { - struct pci_address addr; - unsigned phys; - unsigned size_hi; - unsigned size_lo; -}; - -struct isa_reg_property { - unsigned space; - unsigned address; - unsigned size; -}; - -struct pci_intr_map { - struct pci_address addr; - unsigned dunno; - phandle int_ctrler; - unsigned intr; -}; - -static void prom_exit(void); -static int call_prom(const char *service, int nargs, int nret, ...); -static int call_prom_ret(const char *service, int nargs, int nret, - prom_arg_t *rets, ...); -static void prom_print_hex(unsigned int v); -static int prom_set_color(ihandle ih, int i, int r, int g, int b); -static int prom_next_node(phandle *nodep); -static unsigned long check_display(unsigned long mem); -static void setup_disp_fake_bi(ihandle dp); -static unsigned long copy_device_tree(unsigned long mem_start, - unsigned long mem_end); -static unsigned long inspect_node(phandle node, struct device_node *dad, - unsigned long mem_start, unsigned long mem_end, - struct device_node ***allnextpp); -static void prom_hold_cpus(unsigned long mem); -static void prom_instantiate_rtas(void); -static void * early_get_property(unsigned long base, unsigned long node, - char *prop); - -prom_entry prom __initdata; -ihandle prom_chosen __initdata; -ihandle prom_stdout __initdata; - -static char *prom_display_paths[FB_MAX] __initdata; -static phandle prom_display_nodes[FB_MAX] __initdata; -static unsigned int prom_num_displays __initdata; -static ihandle prom_disp_node __initdata; -char *of_stdout_device __initdata; - -unsigned int rtas_data; /* physical pointer */ -unsigned int rtas_entry; /* physical pointer */ -unsigned int rtas_size; -unsigned int old_rtas; - -boot_infos_t *boot_infos; -char *bootpath; -char *bootdevice; -struct device_node *allnodes; - -extern char *klimit; - -static void __init -prom_exit(void) -{ - struct prom_args args; - - args.service = "exit"; - args.nargs = 0; - args.nret = 0; - prom(&args); - for (;;) /* should never get here */ - ; -} - -static int __init -call_prom(const char *service, int nargs, int nret, ...) -{ - va_list list; - int i; - struct prom_args prom_args; - - prom_args.service = service; - prom_args.nargs = nargs; - prom_args.nret = nret; - va_start(list, nret); - for (i = 0; i < nargs; ++i) - prom_args.args[i] = va_arg(list, prom_arg_t); - va_end(list); - for (i = 0; i < nret; ++i) - prom_args.args[i + nargs] = 0; - prom(&prom_args); - return prom_args.args[nargs]; -} - -static int __init -call_prom_ret(const char *service, int nargs, int nret, prom_arg_t *rets, ...) -{ - va_list list; - int i; - struct prom_args prom_args; - - prom_args.service = service; - prom_args.nargs = nargs; - prom_args.nret = nret; - va_start(list, rets); - for (i = 0; i < nargs; ++i) - prom_args.args[i] = va_arg(list, int); - va_end(list); - for (i = 0; i < nret; ++i) - prom_args.args[i + nargs] = 0; - prom(&prom_args); - for (i = 1; i < nret; ++i) - rets[i-1] = prom_args.args[nargs + i]; - return prom_args.args[nargs]; -} - -void __init -prom_print(const char *msg) -{ - const char *p, *q; - - if (prom_stdout == 0) - return; - - for (p = msg; *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, prom_stdout, p, q - p); - if (*q != 0) { - ++q; - call_prom("write", 3, 1, prom_stdout, "\r\n", 2); - } - } -} - -static void __init -prom_print_hex(unsigned int v) -{ - char buf[16]; - int i, c; - - for (i = 0; i < 8; ++i) { - c = (v >> ((7-i)*4)) & 0xf; - c += (c >= 10)? ('a' - 10): '0'; - buf[i] = c; - } - buf[i] = ' '; - buf[i+1] = 0; - prom_print(buf); -} - -static int __init -prom_set_color(ihandle ih, int i, int r, int g, int b) -{ - return call_prom("call-method", 6, 1, "color!", ih, i, b, g, r); -} - -static int __init -prom_next_node(phandle *nodep) -{ - phandle node; - - if ((node = *nodep) != 0 - && (*nodep = call_prom("child", 1, 1, node)) != 0) - return 1; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - for (;;) { - if ((node = call_prom("parent", 1, 1, node)) == 0) - return 0; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - } -} - -#ifdef CONFIG_POWER4 -/* - * Set up a hash table with a set of entries in it to map the - * first 64MB of RAM. This is used on 64-bit machines since - * some of them don't have BATs. - */ - -static inline void make_pte(unsigned long htab, unsigned int hsize, - unsigned int va, unsigned int pa, int mode) -{ - unsigned int *pteg; - unsigned int hash, i, vsid; - - vsid = ((va >> 28) * 0x111) << 12; - hash = ((va ^ vsid) >> 5) & 0x7fff80; - pteg = (unsigned int *)(htab + (hash & (hsize - 1))); - for (i = 0; i < 8; ++i, pteg += 4) { - if ((pteg[1] & 1) == 0) { - pteg[1] = vsid | ((va >> 16) & 0xf80) | 1; - pteg[3] = pa | mode; - break; - } - } -} - -extern unsigned long _SDR1; -extern PTE *Hash; -extern unsigned long Hash_size; - -static void __init -prom_alloc_htab(void) -{ - unsigned int hsize; - unsigned long htab; - unsigned int addr; - - /* - * Because of OF bugs we can't use the "claim" client - * interface to allocate memory for the hash table. - * This code is only used on 64-bit PPCs, and the only - * 64-bit PPCs at the moment are RS/6000s, and their - * OF is based at 0xc00000 (the 12M point), so we just - * arbitrarily use the 0x800000 - 0xc00000 region for the - * hash table. - * -- paulus. - */ - hsize = 4 << 20; /* POWER4 has no BATs */ - htab = (8 << 20); - call_prom("claim", 3, 1, htab, hsize, 0); - Hash = (void *)(htab + KERNELBASE); - Hash_size = hsize; - _SDR1 = htab + __ilog2(hsize) - 18; - - /* - * Put in PTEs for the first 64MB of RAM - */ - memset((void *)htab, 0, hsize); - for (addr = 0; addr < 0x4000000; addr += 0x1000) - make_pte(htab, hsize, addr + KERNELBASE, addr, - _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX); -#if 0 /* DEBUG stuff mapping the SCC */ - make_pte(htab, hsize, 0x80013000, 0x80013000, - _PAGE_ACCESSED | _PAGE_NO_CACHE | _PAGE_GUARDED | PP_RWXX); -#endif -} -#endif /* CONFIG_POWER4 */ - - -/* - * If we have a display that we don't know how to drive, - * we will want to try to execute OF's open method for it - * later. However, OF will probably fall over if we do that - * we've taken over the MMU. - * So we check whether we will need to open the display, - * and if so, open it now. - */ -static unsigned long __init -check_display(unsigned long mem) -{ - phandle node; - ihandle ih; - int i, j; - char type[16], *path; - static unsigned char default_colors[] = { - 0x00, 0x00, 0x00, - 0x00, 0x00, 0xaa, - 0x00, 0xaa, 0x00, - 0x00, 0xaa, 0xaa, - 0xaa, 0x00, 0x00, - 0xaa, 0x00, 0xaa, - 0xaa, 0xaa, 0x00, - 0xaa, 0xaa, 0xaa, - 0x55, 0x55, 0x55, - 0x55, 0x55, 0xff, - 0x55, 0xff, 0x55, - 0x55, 0xff, 0xff, - 0xff, 0x55, 0x55, - 0xff, 0x55, 0xff, - 0xff, 0xff, 0x55, - 0xff, 0xff, 0xff - }; - const unsigned char *clut; - - prom_disp_node = 0; - - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - call_prom("getprop", 4, 1, node, "device_type", - type, sizeof(type)); - if (strcmp(type, "display") != 0) - continue; - /* It seems OF doesn't null-terminate the path :-( */ - path = (char *) mem; - memset(path, 0, 256); - if (call_prom("package-to-path", 3, 1, node, path, 255) < 0) - continue; - - /* - * If this display is the device that OF is using for stdout, - * move it to the front of the list. - */ - mem += strlen(path) + 1; - i = prom_num_displays++; - if (of_stdout_device != 0 && i > 0 - && strcmp(of_stdout_device, path) == 0) { - for (; i > 0; --i) { - prom_display_paths[i] - = prom_display_paths[i-1]; - prom_display_nodes[i] - = prom_display_nodes[i-1]; - } - } - prom_display_paths[i] = path; - prom_display_nodes[i] = node; - if (i == 0) - prom_disp_node = node; - if (prom_num_displays >= FB_MAX) - break; - } - - for (j=0; j<prom_num_displays; j++) { - path = prom_display_paths[j]; - node = prom_display_nodes[j]; - prom_print("opening display "); - prom_print(path); - ih = call_prom("open", 1, 1, path); - if (ih == 0 || ih == (ihandle) -1) { - prom_print("... failed\n"); - for (i=j+1; i<prom_num_displays; i++) { - prom_display_paths[i-1] = prom_display_paths[i]; - prom_display_nodes[i-1] = prom_display_nodes[i]; - } - if (--prom_num_displays > 0) { - prom_disp_node = prom_display_nodes[j]; - j--; - } else - prom_disp_node = 0; - continue; - } else { - prom_print("... ok\n"); - call_prom("setprop", 4, 1, node, "linux,opened", 0, 0); - - /* - * Setup a usable color table when the appropriate - * method is available. - * Should update this to use set-colors. - */ - clut = default_colors; - for (i = 0; i < 32; i++, clut += 3) - if (prom_set_color(ih, i, clut[0], clut[1], - clut[2]) != 0) - break; - -#ifdef CONFIG_LOGO_LINUX_CLUT224 - clut = PTRRELOC(logo_linux_clut224.clut); - for (i = 0; i < logo_linux_clut224.clutsize; - i++, clut += 3) - if (prom_set_color(ih, i + 32, clut[0], - clut[1], clut[2]) != 0) - break; -#endif /* CONFIG_LOGO_LINUX_CLUT224 */ - } - } - - if (prom_stdout) { - phandle p; - p = call_prom("instance-to-package", 1, 1, prom_stdout); - if (p && p != -1) { - type[0] = 0; - call_prom("getprop", 4, 1, p, "device_type", - type, sizeof(type)); - if (strcmp(type, "display") == 0) - call_prom("setprop", 4, 1, p, "linux,boot-display", - 0, 0); - } - } - - return ALIGNUL(mem); -} - -/* This function will enable the early boot text when doing OF booting. This - * way, xmon output should work too - */ -static void __init -setup_disp_fake_bi(ihandle dp) -{ -#ifdef CONFIG_BOOTX_TEXT - int width = 640, height = 480, depth = 8, pitch; - unsigned address; - struct pci_reg_property addrs[8]; - int i, naddrs; - char name[32]; - char *getprop = "getprop"; - - prom_print("Initializing fake screen: "); - - memset(name, 0, sizeof(name)); - call_prom(getprop, 4, 1, dp, "name", name, sizeof(name)); - name[sizeof(name)-1] = 0; - prom_print(name); - prom_print("\n"); - call_prom(getprop, 4, 1, dp, "width", &width, sizeof(width)); - call_prom(getprop, 4, 1, dp, "height", &height, sizeof(height)); - call_prom(getprop, 4, 1, dp, "depth", &depth, sizeof(depth)); - pitch = width * ((depth + 7) / 8); - call_prom(getprop, 4, 1, dp, "linebytes", - &pitch, sizeof(pitch)); - if (pitch == 1) - pitch = 0x1000; /* for strange IBM display */ - address = 0; - call_prom(getprop, 4, 1, dp, "address", - &address, sizeof(address)); - if (address == 0) { - /* look for an assigned address with a size of >= 1MB */ - naddrs = call_prom(getprop, 4, 1, dp, "assigned-addresses", - addrs, sizeof(addrs)); - naddrs /= sizeof(struct pci_reg_property); - for (i = 0; i < naddrs; ++i) { - if (addrs[i].size_lo >= (1 << 20)) { - address = addrs[i].addr.a_lo; - /* use the BE aperture if possible */ - if (addrs[i].size_lo >= (16 << 20)) - address += (8 << 20); - break; - } - } - if (address == 0) { - prom_print("Failed to get address\n"); - return; - } - } - /* kludge for valkyrie */ - if (strcmp(name, "valkyrie") == 0) - address += 0x1000; - -#ifdef CONFIG_POWER4 -#if CONFIG_TASK_SIZE > 0x80000000 -#error CONFIG_TASK_SIZE cannot be above 0x80000000 with BOOTX_TEXT on G5 -#endif - { - extern boot_infos_t disp_bi; - unsigned long va, pa, i, offset; - va = 0x90000000; - pa = address & 0xfffff000ul; - offset = address & 0x00000fff; - - for (i=0; i<0x4000; i++) { - make_pte((unsigned long)Hash - KERNELBASE, Hash_size, va, pa, - _PAGE_ACCESSED | _PAGE_NO_CACHE | - _PAGE_GUARDED | PP_RWXX); - va += 0x1000; - pa += 0x1000; - } - btext_setup_display(width, height, depth, pitch, 0x90000000 | offset); - disp_bi.dispDeviceBase = (u8 *)address; - } -#else /* CONFIG_POWER4 */ - btext_setup_display(width, height, depth, pitch, address); - btext_prepare_BAT(); -#endif /* CONFIG_POWER4 */ -#endif /* CONFIG_BOOTX_TEXT */ -} - -/* - * Make a copy of the device tree from the PROM. - */ -static unsigned long __init -copy_device_tree(unsigned long mem_start, unsigned long mem_end) -{ - phandle root; - unsigned long new_start; - struct device_node **allnextp; - - root = call_prom("peer", 1, 1, (phandle)0); - if (root == (phandle)0) { - prom_print("couldn't get device tree root\n"); - prom_exit(); - } - allnextp = &allnodes; - mem_start = ALIGNUL(mem_start); - new_start = inspect_node(root, NULL, mem_start, mem_end, &allnextp); - *allnextp = NULL; - return new_start; -} - -static unsigned long __init -inspect_node(phandle node, struct device_node *dad, - unsigned long mem_start, unsigned long mem_end, - struct device_node ***allnextpp) -{ - int l; - phandle child; - struct device_node *np; - struct property *pp, **prev_propp; - char *prev_name, *namep; - unsigned char *valp; - - np = (struct device_node *) mem_start; - mem_start += sizeof(struct device_node); - memset(np, 0, sizeof(*np)); - np->node = node; - **allnextpp = PTRUNRELOC(np); - *allnextpp = &np->allnext; - if (dad != 0) { - np->parent = PTRUNRELOC(dad); - /* we temporarily use the `next' field as `last_child'. */ - if (dad->next == 0) - dad->child = PTRUNRELOC(np); - else - dad->next->sibling = PTRUNRELOC(np); - dad->next = np; - } - - /* get and store all properties */ - prev_propp = &np->properties; - prev_name = ""; - for (;;) { - pp = (struct property *) mem_start; - namep = (char *) (pp + 1); - pp->name = PTRUNRELOC(namep); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) - break; - mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1); - prev_name = namep; - valp = (unsigned char *) mem_start; - pp->value = PTRUNRELOC(valp); - pp->length = call_prom("getprop", 4, 1, node, namep, - valp, mem_end - mem_start); - if (pp->length < 0) - continue; -#ifdef MAX_PROPERTY_LENGTH - if (pp->length > MAX_PROPERTY_LENGTH) - continue; /* ignore this property */ -#endif - mem_start = ALIGNUL(mem_start + pp->length); - *prev_propp = PTRUNRELOC(pp); - prev_propp = &pp->next; - } - if (np->node != 0) { - /* Add a "linux,phandle" property" */ - pp = (struct property *) mem_start; - *prev_propp = PTRUNRELOC(pp); - prev_propp = &pp->next; - namep = (char *) (pp + 1); - pp->name = PTRUNRELOC(namep); - strcpy(namep, "linux,phandle"); - mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1); - pp->value = (unsigned char *) PTRUNRELOC(&np->node); - pp->length = sizeof(np->node); - } - *prev_propp = NULL; - - /* get the node's full name */ - l = call_prom("package-to-path", 3, 1, node, - mem_start, mem_end - mem_start); - if (l >= 0) { - char *p, *ep; - - np->full_name = PTRUNRELOC((char *) mem_start); - *(char *)(mem_start + l) = 0; - /* Fixup an Apple bug where they have bogus \0 chars in the - * middle of the path in some properties - */ - for (p = (char *)mem_start, ep = p + l; p < ep; p++) - if ((*p) == '\0') { - memmove(p, p+1, ep - p); - ep--; - } - mem_start = ALIGNUL(mem_start + l + 1); - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - mem_start = inspect_node(child, np, mem_start, mem_end, - allnextpp); - child = call_prom("peer", 1, 1, child); - } - - return mem_start; -} - -unsigned long smp_chrp_cpu_nr __initdata = 0; - -/* - * With CHRP SMP we need to use the OF to start the other - * processors so we can't wait until smp_boot_cpus (the OF is - * trashed by then) so we have to put the processors into - * a holding pattern controlled by the kernel (not OF) before - * we destroy the OF. - * - * This uses a chunk of high memory, puts some holding pattern - * code there and sends the other processors off to there until - * smp_boot_cpus tells them to do something. We do that by using - * physical address 0x0. The holding pattern checks that address - * until its cpu # is there, when it is that cpu jumps to - * __secondary_start(). smp_boot_cpus() takes care of setting those - * values. - * - * We also use physical address 0x4 here to tell when a cpu - * is in its holding pattern code. - * - * -- Cort - * - * Note that we have to do this if we have more than one CPU, - * even if this is a UP kernel. Otherwise when we trash OF - * the other CPUs will start executing some random instructions - * and crash the system. -- paulus - */ -static void __init -prom_hold_cpus(unsigned long mem) -{ - extern void __secondary_hold(void); - unsigned long i; - int cpu; - phandle node; - char type[16], *path; - unsigned int reg; - - /* - * XXX: hack to make sure we're chrp, assume that if we're - * chrp we have a device_type property -- Cort - */ - node = call_prom("finddevice", 1, 1, "/"); - if (call_prom("getprop", 4, 1, node, - "device_type", type, sizeof(type)) <= 0) - return; - - /* copy the holding pattern code to someplace safe (0) */ - /* the holding pattern is now within the first 0x100 - bytes of the kernel image -- paulus */ - memcpy((void *)0, _stext, 0x100); - flush_icache_range(0, 0x100); - - /* look for cpus */ - *(unsigned long *)(0x0) = 0; - asm volatile("dcbf 0,%0": : "r" (0) : "memory"); - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - call_prom("getprop", 4, 1, node, "device_type", - type, sizeof(type)); - if (strcmp(type, "cpu") != 0) - continue; - path = (char *) mem; - memset(path, 0, 256); - if (call_prom("package-to-path", 3, 1, node, path, 255) < 0) - continue; - reg = -1; - call_prom("getprop", 4, 1, node, "reg", ®, sizeof(reg)); - cpu = smp_chrp_cpu_nr++; -#ifdef CONFIG_SMP - smp_hw_index[cpu] = reg; -#endif /* CONFIG_SMP */ - /* XXX: hack - don't start cpu 0, this cpu -- Cort */ - if (cpu == 0) - continue; - prom_print("starting cpu "); - prom_print(path); - *(ulong *)(0x4) = 0; - call_prom("start-cpu", 3, 0, node, - (char *)__secondary_hold - _stext, cpu); - prom_print("..."); - for ( i = 0 ; (i < 10000) && (*(ulong *)(0x4) == 0); i++ ) - ; - if (*(ulong *)(0x4) == cpu) - prom_print("ok\n"); - else { - prom_print("failed: "); - prom_print_hex(*(ulong *)0x4); - prom_print("\n"); - } - } -} - -static void __init -prom_instantiate_rtas(void) -{ - ihandle prom_rtas; - prom_arg_t result; - - prom_rtas = call_prom("finddevice", 1, 1, "/rtas"); - if (prom_rtas == -1) - return; - - rtas_size = 0; - call_prom("getprop", 4, 1, prom_rtas, - "rtas-size", &rtas_size, sizeof(rtas_size)); - prom_print("instantiating rtas"); - if (rtas_size == 0) { - rtas_data = 0; - } else { - /* - * Ask OF for some space for RTAS. - * Actually OF has bugs so we just arbitrarily - * use memory at the 6MB point. - */ - rtas_data = 6 << 20; - prom_print(" at "); - prom_print_hex(rtas_data); - } - - prom_rtas = call_prom("open", 1, 1, "/rtas"); - prom_print("..."); - rtas_entry = 0; - if (call_prom_ret("call-method", 3, 2, &result, - "instantiate-rtas", prom_rtas, rtas_data) == 0) - rtas_entry = result; - if ((rtas_entry == -1) || (rtas_entry == 0)) - prom_print(" failed\n"); - else - prom_print(" done\n"); -} - -/* - * We enter here early on, when the Open Firmware prom is still - * handling exceptions and the MMU hash table for us. - */ -unsigned long __init -prom_init(int r3, int r4, prom_entry pp) -{ - unsigned long mem; - ihandle prom_mmu; - unsigned long offset = reloc_offset(); - int i, l; - char *p, *d; - unsigned long phys; - prom_arg_t result[3]; - char model[32]; - phandle node; - int rc; - - /* Default */ - phys = (unsigned long) &_stext; - - /* First get a handle for the stdout device */ - prom = pp; - prom_chosen = call_prom("finddevice", 1, 1, "/chosen"); - if (prom_chosen == -1) - prom_exit(); - if (call_prom("getprop", 4, 1, prom_chosen, "stdout", - &prom_stdout, sizeof(prom_stdout)) <= 0) - prom_exit(); - - /* Get the full OF pathname of the stdout device */ - mem = (unsigned long) klimit + offset; - p = (char *) mem; - memset(p, 0, 256); - call_prom("instance-to-path", 3, 1, prom_stdout, p, 255); - of_stdout_device = p; - mem += strlen(p) + 1; - - /* Get the boot device and translate it to a full OF pathname. */ - p = (char *) mem; - l = call_prom("getprop", 4, 1, prom_chosen, "bootpath", p, 1<<20); - if (l > 0) { - p[l] = 0; /* should already be null-terminated */ - bootpath = PTRUNRELOC(p); - mem += l + 1; - d = (char *) mem; - *d = 0; - call_prom("canon", 3, 1, p, d, 1<<20); - bootdevice = PTRUNRELOC(d); - mem = ALIGNUL(mem + strlen(d) + 1); - } - - prom_instantiate_rtas(); - -#ifdef CONFIG_POWER4 - /* - * Find out how much memory we have and allocate a - * suitably-sized hash table. - */ - prom_alloc_htab(); -#endif - mem = check_display(mem); - - prom_print("copying OF device tree..."); - mem = copy_device_tree(mem, mem + (1<<20)); - prom_print("done\n"); - - prom_hold_cpus(mem); - - klimit = (char *) (mem - offset); - - node = call_prom("finddevice", 1, 1, "/"); - rc = call_prom("getprop", 4, 1, node, "model", model, sizeof(model)); - if (rc > 0 && !strncmp (model, "Pegasos", 7) - && strncmp (model, "Pegasos2", 8)) { - /* Pegasos 1 has a broken translate method in the OF, - * and furthermore the BATs are mapped 1:1 so the phys - * address calculated above is correct, so let's use - * it directly. - */ - } else if (offset == 0) { - /* If we are already running at 0xc0000000, we assume we were - * loaded by an OF bootloader which did set a BAT for us. - * This breaks OF translate so we force phys to be 0. - */ - prom_print("(already at 0xc0000000) phys=0\n"); - phys = 0; - } else if (call_prom("getprop", 4, 1, prom_chosen, "mmu", - &prom_mmu, sizeof(prom_mmu)) <= 0) { - prom_print(" no MMU found\n"); - } else if (call_prom_ret("call-method", 4, 4, result, "translate", - prom_mmu, &_stext, 1) != 0) { - prom_print(" (translate failed)\n"); - } else { - /* We assume the phys. address size is 3 cells */ - phys = result[2]; - } - - if (prom_disp_node != 0) - setup_disp_fake_bi(prom_disp_node); - - /* Use quiesce call to get OF to shut down any devices it's using */ - prom_print("Calling quiesce ...\n"); - call_prom("quiesce", 0, 0); - - /* Relocate various pointers which will be used once the - kernel is running at the address it was linked at. */ - for (i = 0; i < prom_num_displays; ++i) - prom_display_paths[i] = PTRUNRELOC(prom_display_paths[i]); - -#ifdef CONFIG_SERIAL_CORE_CONSOLE - /* Relocate the of stdout for console autodetection */ - of_stdout_device = PTRUNRELOC(of_stdout_device); -#endif - - prom_print("returning 0x"); - prom_print_hex(phys); - prom_print("from prom_init\n"); - prom_stdout = 0; - - return phys; -} - -/* - * early_get_property is used to access the device tree image prepared - * by BootX very early on, before the pointers in it have been relocated. - */ -static void * __init -early_get_property(unsigned long base, unsigned long node, char *prop) -{ - struct device_node *np = (struct device_node *)(base + node); - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) { - pp = (struct property *) (base + (unsigned long)pp); - if (strcmp((char *)((unsigned long)pp->name + base), - prop) == 0) { - return (void *)((unsigned long)pp->value + base); - } - } - return NULL; -} - -/* Is boot-info compatible ? */ -#define BOOT_INFO_IS_COMPATIBLE(bi) ((bi)->compatible_version <= BOOT_INFO_VERSION) -#define BOOT_INFO_IS_V2_COMPATIBLE(bi) ((bi)->version >= 2) -#define BOOT_INFO_IS_V4_COMPATIBLE(bi) ((bi)->version >= 4) - -void __init -bootx_init(unsigned long r4, unsigned long phys) -{ - boot_infos_t *bi = (boot_infos_t *) r4; - unsigned long space; - unsigned long ptr, x; - char *model; - - boot_infos = PTRUNRELOC(bi); - if (!BOOT_INFO_IS_V2_COMPATIBLE(bi)) - bi->logicalDisplayBase = NULL; - -#ifdef CONFIG_BOOTX_TEXT - btext_init(bi); - - /* - * Test if boot-info is compatible. Done only in config - * CONFIG_BOOTX_TEXT since there is nothing much we can do - * with an incompatible version, except display a message - * and eventually hang the processor... - * - * I'll try to keep enough of boot-info compatible in the - * future to always allow display of this message; - */ - if (!BOOT_INFO_IS_COMPATIBLE(bi)) { - btext_drawstring(" !!! WARNING - Incompatible version of BootX !!!\n\n\n"); - btext_flushscreen(); - } -#endif /* CONFIG_BOOTX_TEXT */ - - /* New BootX enters kernel with MMU off, i/os are not allowed - here. This hack will have been done by the boostrap anyway. - */ - if (bi->version < 4) { - /* - * XXX If this is an iMac, turn off the USB controller. - */ - model = (char *) early_get_property - (r4 + bi->deviceTreeOffset, 4, "model"); - if (model - && (strcmp(model, "iMac,1") == 0 - || strcmp(model, "PowerMac1,1") == 0)) { - out_le32((unsigned *)0x80880008, 1); /* XXX */ - } - } - - /* Move klimit to enclose device tree, args, ramdisk, etc... */ - if (bi->version < 5) { - space = bi->deviceTreeOffset + bi->deviceTreeSize; - if (bi->ramDisk) - space = bi->ramDisk + bi->ramDiskSize; - } else - space = bi->totalParamsSize; - klimit = PTRUNRELOC((char *) bi + space); - - /* New BootX will have flushed all TLBs and enters kernel with - MMU switched OFF, so this should not be useful anymore. - */ - if (bi->version < 4) { - /* - * Touch each page to make sure the PTEs for them - * are in the hash table - the aim is to try to avoid - * getting DSI exceptions while copying the kernel image. - */ - for (ptr = ((unsigned long) &_stext) & PAGE_MASK; - ptr < (unsigned long)bi + space; ptr += PAGE_SIZE) - x = *(volatile unsigned long *)ptr; - } - -#ifdef CONFIG_BOOTX_TEXT - /* - * Note that after we call btext_prepare_BAT, we can't do - * prom_draw*, flushscreen or clearscreen until we turn the MMU - * on, since btext_prepare_BAT sets disp_bi.logicalDisplayBase - * to a virtual address. - */ - btext_prepare_BAT(); -#endif -} diff --git a/arch/ppc/syslib/todc_time.c b/arch/ppc/syslib/todc_time.c index 1323c641c19..a8168b8e568 100644 --- a/arch/ppc/syslib/todc_time.c +++ b/arch/ppc/syslib/todc_time.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/todc_time.c - * * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818 * Real Time Clocks/Timekeepers. * diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c index 47f04c71fe9..e672b600f31 100644 --- a/arch/ppc/syslib/xilinx_pic.c +++ b/arch/ppc/syslib/xilinx_pic.c @@ -1,6 +1,4 @@ /* - * arch/ppc/syslib/xilinx_pic.c - * * Interrupt controller driver for Xilinx Virtex-II Pro. * * Author: MontaVista Software, Inc. @@ -15,7 +13,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/io.h> -#include <asm/xparameters.h> +#include <platforms/4xx/xparameters/xparameters.h> #include <asm/ibm4xx.h> #include <asm/machdep.h> diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index ff86b2d814c..cfc2d6ad464 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -58,7 +58,7 @@ static struct sysrq_key_op sysrq_xmon_op = void xmon_map_scc(void) { -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP volatile unsigned char *base; #elif defined(CONFIG_GEMINI) |