diff options
Diffstat (limited to 'arch/s390/Kconfig')
| -rw-r--r-- | arch/s390/Kconfig | 421 |
1 files changed, 223 insertions, 198 deletions
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 107610e01a2..f9acddd9ace 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -49,10 +49,13 @@ config GENERIC_LOCKBREAK config PGSTE def_bool y if KVM -config VIRT_CPU_ACCOUNTING +config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y -config ARCH_SUPPORTS_DEBUG_PAGEALLOC +config KEXEC + def_bool y + +config AUDIT_ARCH def_bool y config S390 @@ -84,11 +87,15 @@ config S390 select HAVE_KERNEL_XZ select HAVE_ARCH_MUTEX_CPU_RELAX select HAVE_ARCH_JUMP_LABEL if !MARCH_G5 + select HAVE_BPF_JIT if 64BIT && PACK_STACK select ARCH_SAVE_PAGE_KEYS if HIBERNATION select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP select HAVE_CMPXCHG_LOCAL + select HAVE_CMPXCHG_DOUBLE + select HAVE_VIRT_CPU_ACCOUNTING + select VIRT_CPU_ACCOUNTING select ARCH_DISCARD_MEMBLOCK select BUILDTIME_EXTABLE_SORT select ARCH_INLINE_SPIN_TRYLOCK @@ -133,9 +140,79 @@ source "init/Kconfig" source "kernel/Kconfig.freezer" -menu "Base setup" +menu "Processor type and features" + +config HAVE_MARCH_Z900_FEATURES + def_bool n + +config HAVE_MARCH_Z990_FEATURES + def_bool n + select HAVE_MARCH_Z900_FEATURES + +config HAVE_MARCH_Z9_109_FEATURES + def_bool n + select HAVE_MARCH_Z990_FEATURES + +config HAVE_MARCH_Z10_FEATURES + def_bool n + select HAVE_MARCH_Z9_109_FEATURES + +config HAVE_MARCH_Z196_FEATURES + def_bool n + select HAVE_MARCH_Z10_FEATURES + +choice + prompt "Processor type" + default MARCH_G5 + +config MARCH_G5 + bool "System/390 model G5 and G6" + depends on !64BIT + help + Select this to build a 31 bit kernel that works + on all ESA/390 and z/Architecture machines. -comment "Processor type and features" +config MARCH_Z900 + bool "IBM zSeries model z800 and z900" + select HAVE_MARCH_Z900_FEATURES if 64BIT + help + Select this to enable optimizations for model z800/z900 (2064 and + 2066 series). This will enable some optimizations that are not + available on older ESA/390 (31 Bit) only CPUs. + +config MARCH_Z990 + bool "IBM zSeries model z890 and z990" + select HAVE_MARCH_Z990_FEATURES if 64BIT + help + Select this to enable optimizations for model z890/z990 (2084 and + 2086 series). The kernel will be slightly faster but will not work + on older machines. + +config MARCH_Z9_109 + bool "IBM System z9" + select HAVE_MARCH_Z9_109_FEATURES if 64BIT + help + Select this to enable optimizations for IBM System z9 (2094 and + 2096 series). The kernel will be slightly faster but will not work + on older machines. + +config MARCH_Z10 + bool "IBM System z10" + select HAVE_MARCH_Z10_FEATURES if 64BIT + help + Select this to enable optimizations for IBM System z10 (2097 and + 2098 series). The kernel will be slightly faster but will not work + on older machines. + +config MARCH_Z196 + bool "IBM zEnterprise 114 and 196" + select HAVE_MARCH_Z196_FEATURES if 64BIT + help + Select this to enable optimizations for IBM zEnterprise 114 and 196 + (2818 and 2817 series). The kernel will be slightly faster but will + not work on older machines. + +endchoice config 64BIT def_bool y @@ -147,6 +224,24 @@ config 64BIT config 32BIT def_bool y if !64BIT +config COMPAT + def_bool y + prompt "Kernel support for 31 bit emulation" + depends on 64BIT + select COMPAT_BINFMT_ELF if BINFMT_ELF + select ARCH_WANT_OLD_COMPAT_IPC + help + Select this option if you want to enable your system kernel to + handle system-calls from ELF binaries for 31 bit ESA. This option + (and some other stuff like libraries and such) is needed for + executing 31 bit applications. It is safe to say "Y". + +config SYSVIPC_COMPAT + def_bool y if COMPAT && SYSVIPC + +config KEYS_COMPAT + def_bool y if COMPAT && KEYS + config SMP def_bool y prompt "Symmetric multi-processing support" @@ -202,6 +297,8 @@ config SCHED_BOOK Book scheduler support improves the CPU scheduler's decision making when dealing with machines that have several books. +source kernel/Kconfig.preempt + config MATHEMU def_bool y prompt "IEEE FPU emulation" @@ -211,100 +308,35 @@ config MATHEMU on older ESA/390 machines. Say Y unless you know your machine doesn't need this. -config COMPAT - def_bool y - prompt "Kernel support for 31 bit emulation" - depends on 64BIT - select COMPAT_BINFMT_ELF if BINFMT_ELF - select ARCH_WANT_OLD_COMPAT_IPC - help - Select this option if you want to enable your system kernel to - handle system-calls from ELF binaries for 31 bit ESA. This option - (and some other stuff like libraries and such) is needed for - executing 31 bit applications. It is safe to say "Y". +source kernel/Kconfig.hz -config SYSVIPC_COMPAT - def_bool y if COMPAT && SYSVIPC +endmenu -config KEYS_COMPAT - def_bool y if COMPAT && KEYS +menu "Memory setup" -config AUDIT_ARCH +config ARCH_SPARSEMEM_ENABLE def_bool y + select SPARSEMEM_VMEMMAP_ENABLE + select SPARSEMEM_VMEMMAP + select SPARSEMEM_STATIC if !64BIT -config HAVE_MARCH_Z900_FEATURES - def_bool n - -config HAVE_MARCH_Z990_FEATURES - def_bool n - select HAVE_MARCH_Z900_FEATURES - -config HAVE_MARCH_Z9_109_FEATURES - def_bool n - select HAVE_MARCH_Z990_FEATURES - -config HAVE_MARCH_Z10_FEATURES - def_bool n - select HAVE_MARCH_Z9_109_FEATURES - -config HAVE_MARCH_Z196_FEATURES - def_bool n - select HAVE_MARCH_Z10_FEATURES - -comment "Code generation options" - -choice - prompt "Processor type" - default MARCH_G5 - -config MARCH_G5 - bool "System/390 model G5 and G6" - depends on !64BIT - help - Select this to build a 31 bit kernel that works - on all ESA/390 and z/Architecture machines. - -config MARCH_Z900 - bool "IBM zSeries model z800 and z900" - select HAVE_MARCH_Z900_FEATURES if 64BIT - help - Select this to enable optimizations for model z800/z900 (2064 and - 2066 series). This will enable some optimizations that are not - available on older ESA/390 (31 Bit) only CPUs. +config ARCH_SPARSEMEM_DEFAULT + def_bool y -config MARCH_Z990 - bool "IBM zSeries model z890 and z990" - select HAVE_MARCH_Z990_FEATURES if 64BIT - help - Select this to enable optimizations for model z890/z990 (2084 and - 2086 series). The kernel will be slightly faster but will not work - on older machines. +config ARCH_SELECT_MEMORY_MODEL + def_bool y -config MARCH_Z9_109 - bool "IBM System z9" - select HAVE_MARCH_Z9_109_FEATURES if 64BIT - help - Select this to enable optimizations for IBM System z9 (2094 and - 2096 series). The kernel will be slightly faster but will not work - on older machines. +config ARCH_ENABLE_MEMORY_HOTPLUG + def_bool y if SPARSEMEM -config MARCH_Z10 - bool "IBM System z10" - select HAVE_MARCH_Z10_FEATURES if 64BIT - help - Select this to enable optimizations for IBM System z10 (2097 and - 2098 series). The kernel will be slightly faster but will not work - on older machines. +config ARCH_ENABLE_MEMORY_HOTREMOVE + def_bool y -config MARCH_Z196 - bool "IBM zEnterprise 114 and 196" - select HAVE_MARCH_Z196_FEATURES if 64BIT - help - Select this to enable optimizations for IBM zEnterprise 114 and 196 - (2818 and 2817 series). The kernel will be slightly faster but will - not work on older machines. +config FORCE_MAX_ZONEORDER + int + default "9" -endchoice +source "mm/Kconfig" config PACK_STACK def_bool y @@ -368,34 +400,9 @@ config WARN_DYNAMIC_STACK Say N if you are unsure. -comment "Kernel preemption" - -source "kernel/Kconfig.preempt" - -config ARCH_SPARSEMEM_ENABLE - def_bool y - select SPARSEMEM_VMEMMAP_ENABLE - select SPARSEMEM_VMEMMAP - select SPARSEMEM_STATIC if !64BIT - -config ARCH_SPARSEMEM_DEFAULT - def_bool y - -config ARCH_SELECT_MEMORY_MODEL - def_bool y - -config ARCH_ENABLE_MEMORY_HOTPLUG - def_bool y if SPARSEMEM - -config ARCH_ENABLE_MEMORY_HOTREMOVE - def_bool y - -config ARCH_HIBERNATION_POSSIBLE - def_bool y if 64BIT - -source "mm/Kconfig" +endmenu -comment "I/O subsystem configuration" +menu "I/O subsystem" config QDIO def_tristate y @@ -426,13 +433,102 @@ config CHSC_SCH If unsure, say N. -comment "Misc" +config SCM_BUS + def_bool y + depends on 64BIT + prompt "SCM bus driver" + help + Bus driver for Storage Class Memory. + +config EADM_SCH + def_tristate m + prompt "Support for EADM subchannels" + depends on SCM_BUS + help + This driver allows usage of EADM subchannels. EADM subchannels act + as a communication vehicle for SCM increments. + + To compile this driver as a module, choose M here: the + module will be called eadm_sch. + +endmenu + +menu "Dump support" + +config CRASH_DUMP + bool "kernel crash dumps" + depends on 64BIT && SMP + select KEXEC + help + Generate crash dump after being started by kexec. + Crash dump kernels are loaded in the main kernel with kexec-tools + into a specially reserved region and then later executed after + a crash by kdump/kexec. + For more details see Documentation/kdump/kdump.txt + +config ZFCPDUMP + def_bool n + prompt "zfcpdump support" + select SMP + help + Select this option if you want to build an zfcpdump enabled kernel. + Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this. + +endmenu + +menu "Executable file formats / Emulations" source "fs/Kconfig.binfmt" -config FORCE_MAX_ZONEORDER - int - default "9" +config SECCOMP + def_bool y + prompt "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via /proc/<pid>/seccomp, it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + + If unsure, say Y. + +endmenu + +menu "Power Management" + +config ARCH_HIBERNATION_POSSIBLE + def_bool y if 64BIT + +source "kernel/power/Kconfig" + +endmenu + +source "net/Kconfig" + +config PCMCIA + def_bool n + +config CCW + def_bool y + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/s390/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" + +menu "Virtualization" config PFAULT def_bool y @@ -448,8 +544,8 @@ config PFAULT this option. config SHARED_KERNEL - def_bool y - prompt "VM shared kernel support" + bool "VM shared kernel support" + depends on !JUMP_LABEL help Select this option, if you want to share the text segment of the Linux kernel between different VM guests. This reduces memory @@ -544,8 +640,6 @@ config APPLDATA_NET_SUM This can also be compiled as a module, which will be called appldata_net_sum.o. -source kernel/Kconfig.hz - config S390_HYPFS_FS def_bool y prompt "s390 hypervisor file system support" @@ -554,90 +648,21 @@ config S390_HYPFS_FS This is a virtual file system intended to provide accounting information in an s390 hypervisor environment. -config KEXEC - def_bool n - prompt "kexec system call" - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but is independent of hardware/microcode support. - -config CRASH_DUMP - bool "kernel crash dumps" - depends on 64BIT && SMP - select KEXEC - help - Generate crash dump after being started by kexec. - Crash dump kernels are loaded in the main kernel with kexec-tools - into a specially reserved region and then later executed after - a crash by kdump/kexec. - For more details see Documentation/kdump/kdump.txt - -config ZFCPDUMP - def_bool n - prompt "zfcpdump support" - select SMP - help - Select this option if you want to build an zfcpdump enabled kernel. - Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this. +source "arch/s390/kvm/Kconfig" config S390_GUEST def_bool y - prompt "s390 guest support for KVM (EXPERIMENTAL)" + prompt "s390 support for virtio devices (EXPERIMENTAL)" depends on 64BIT && EXPERIMENTAL select VIRTUALIZATION select VIRTIO select VIRTIO_RING select VIRTIO_CONSOLE help - Select this option if you want to run the kernel as a guest under - the KVM hypervisor. This will add detection for KVM as well as a - virtio transport. If KVM is detected, the virtio console will be - the default console. - -config SECCOMP - def_bool y - prompt "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. - -endmenu + Enabling this option adds support for virtio based paravirtual device + drivers on s390. -menu "Power Management" - -source "kernel/power/Kconfig" + Select this option if you want to run the kernel as a guest under + the KVM hypervisor. endmenu - -source "net/Kconfig" - -config PCMCIA - def_bool n - -config CCW - def_bool y - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/s390/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" - -source "arch/s390/kvm/Kconfig" |