diff options
Diffstat (limited to 'arch/s390/kernel/head.S')
-rw-r--r-- | arch/s390/kernel/head.S | 427 |
1 files changed, 87 insertions, 340 deletions
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 55654b6e16d..d31a97c89f6 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -1,11 +1,12 @@ /* * arch/s390/kernel/head.S * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Rob van der Heij (rvdhei@iae.nl) + * (C) Copyright IBM Corp. 1999, 2005 + * + * Author(s): Hartmut Penner <hp@de.ibm.com> + * Martin Schwidefsky <schwidefsky@de.ibm.com> + * Rob van der Heij <rvdhei@iae.nl> + * Heiko Carstens <heiko.carstens@de.ibm.com> * * There are 5 different IPL methods * 1) load the image directly into ram at address 0 and do an PSW restart @@ -19,12 +20,7 @@ * 5) direct call of start by the SALIPL loader * We use the cpuid to distinguish between VM and native ipl * params for kernel are pushed to 0x10400 (see setup.h) - - Changes: - Okt 25 2000 <rvdheij@iae.nl> - added code to skip HDR and EOF to allow SL tape IPL (5 retries) - changed first CCW from rewind to backspace block - + * */ #include <linux/config.h> @@ -34,6 +30,12 @@ #include <asm/thread_info.h> #include <asm/page.h> +#ifdef CONFIG_ARCH_S390X +#define ARCH_OFFSET 4 +#else +#define ARCH_OFFSET 0 +#endif + #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW @@ -201,7 +203,7 @@ ssch 0(%r3) # load chunk of 1600 bytes bnz .Llderr .Lwait4irq: - mvc __LC_IO_NEW_PSW(8),.Lnewpsw # set up IO interrupt psw + mvc 0x78(8),.Lnewpsw # set up IO interrupt psw lpsw .Lwaitpsw .Lioint: c %r1,0xb8 # compare subchannel number @@ -265,13 +267,13 @@ iplstart: la %r2,IPL_BS # load start address bas %r14,.Lloader # load rest of ipl image l %r12,.Lparm # pointer to parameter area - st %r1,IPL_DEVICE-PARMAREA(%r12) # store ipl device number + st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number # # load parameter file from ipl device # .Lagain1: - l %r2,INITRD_START-PARMAREA(%r12) # use ramdisk location as temp + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # ramdisk loc. is temp bas %r14,.Lloader # load parameter file ltr %r2,%r2 # got anything ? bz .Lnopf @@ -279,7 +281,7 @@ iplstart: bnh .Lnotrunc la %r2,895 .Lnotrunc: - l %r4,INITRD_START-PARMAREA(%r12) + l %r4,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r4),.L_hdr # if it is HDRx bz .Lagain1 # skip dataset header clc 0(3,%r4),.L_eof # if it is EOFx @@ -322,14 +324,14 @@ iplstart: # load ramdisk from ipl device # .Lagain2: - l %r2,INITRD_START-PARMAREA(%r12) # load adr. of ramdisk + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # addr of ramdisk bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE-PARMAREA(%r12) # store size of ramdisk + st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of ramdisk ltr %r2,%r2 bnz .Lrdcont - st %r2,INITRD_START-PARMAREA(%r12) # no ramdisk found, null it + st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found .Lrdcont: - l %r2,INITRD_START-PARMAREA(%r12) + l %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) clc 0(3,%r2),.L_hdr # skip HDRx and EOFx bz .Lagain2 @@ -432,10 +434,10 @@ start: la %r3,1(%r3) .done: l %r1,.memsize - st %r3,0(%r1) + st %r3,ARCH_OFFSET(%r1) slr %r0,%r0 - st %r0,INITRD_SIZE-PARMAREA(%r11) - st %r0,INITRD_START-PARMAREA(%r11) + st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) + st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) j startup # continue with startup .tbl: .long _ebcasc # translate table .cmd: .long COMMAND_LINE # address of command line buffer @@ -478,322 +480,67 @@ start: .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7 .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff -# -# startup-code at 0x10000, running in real mode -# this is called either by the ipl loader or directly by PSW restart -# or linload or SALIPL -# - .org 0x10000 -startup:basr %r13,0 # get base -.LPG1: lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers - la %r12,_pstart-.LPG1(%r13) # pointer to parameter area - # move IPL device to lowcore - mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12) - -# -# clear bss memory -# - l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss - l %r3,.Lbss_end-.LPG1(%r13) # end of bss - sr %r3,%r2 # length of bss - sr %r4,%r4 # - sr %r5,%r5 # set src,length and pad to zero - sr %r0,%r0 # - mvcle %r2,%r4,0 # clear mem - jo .-4 # branch back, if not finish - - l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word -.Lservicecall: - stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts - - stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0 - la %r1,0x200 # set bit 22 - o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1 - st %r1,.Lcr-.LPG1(%r13) - lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0 - - mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw - la %r1, .Lsclph-.LPG1(%r13) - a %r1,__LC_EXT_NEW_PSW+4 # set handler - st %r1,__LC_EXT_NEW_PSW+4 - - la %r4,_pstart-.LPG1(%r13) # %r4 is our index for sccb stuff - la %r1, .Lsccb-PARMAREA(%r4) # our sccb - .insn rre,0xb2200000,%r2,%r1 # service call - ipm %r1 - srl %r1,28 # get cc code - xr %r3, %r3 - chi %r1,3 - be .Lfchunk-.LPG1(%r13) # leave - chi %r1,2 - be .Lservicecall-.LPG1(%r13) - lpsw .Lwaitsclp-.LPG1(%r13) -.Lsclph: - lh %r1,.Lsccbr-PARMAREA(%r4) - chi %r1,0x10 # 0x0010 is the sucess code - je .Lprocsccb # let's process the sccb - chi %r1,0x1f0 - bne .Lfchunk-.LPG1(%r13) # unhandled error code - c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced - bne .Lfchunk-.LPG1(%r13) # if no, give up - l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP - b .Lservicecall-.LPG1(%r13) -.Lprocsccb: - lhi %r1,0 - icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0 - jnz .Lscnd - lhi %r1,0x800 # otherwise report 2GB -.Lscnd: - lhi %r3,0x800 # limit reported memory size to 2GB - cr %r1,%r3 - jl .Lno2gb - lr %r1,%r3 -.Lno2gb: - xr %r3,%r3 # same logic - ic %r3,.Lscpa1-PARMAREA(%r4) - chi %r3,0x00 - jne .Lcompmem - l %r3,.Lscpa2-PARMAREA(%r13) -.Lcompmem: - mr %r2,%r1 # mem in MB on 128-bit - l %r1,.Lonemb-.LPG1(%r13) - mr %r2,%r1 # mem size in bytes in %r3 - b .Lfchunk-.LPG1(%r13) - -.Lpmask: - .byte 0 -.align 8 -.Lpcext:.long 0x00080000,0x80000000 -.Lcr: - .long 0x00 # place holder for cr0 -.Lwaitsclp: - .long 0x020A0000 - .long .Lsclph -.Lrcp: - .int 0x00120001 # Read SCP forced code -.Lrcp2: - .int 0x00020001 # Read SCP code -.Lonemb: - .int 0x100000 -.Lfchunk: - -# -# find memory chunks. -# - lr %r9,%r3 # end of mem - mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13) - la %r1,1 # test in increments of 128KB - sll %r1,17 - l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array - slr %r4,%r4 # set start of chunk to zero - slr %r5,%r5 # set end of chunk to zero - slr %r6,%r6 # set access code to zero - la %r10, MEMORY_CHUNKS # number of chunks -.Lloop: - tprot 0(%r5),0 # test protection of first byte - ipm %r7 - srl %r7,28 - clr %r6,%r7 # compare cc with last access code - be .Lsame-.LPG1(%r13) - b .Lchkmem-.LPG1(%r13) -.Lsame: - ar %r5,%r1 # add 128KB to end of chunk - bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop -.Lchkmem: # > 2GB or tprot got a program check - clr %r4,%r5 # chunk size > 0? - be .Lchkloop-.LPG1(%r13) - st %r4,0(%r3) # store start address of chunk - lr %r0,%r5 - slr %r0,%r4 - st %r0,4(%r3) # store size of chunk - st %r6,8(%r3) # store type of chunk - la %r3,12(%r3) - l %r4,.Lmemsize-.LPG1(%r13) # address of variable memory_size - st %r5,0(%r4) # store last end to memory size - ahi %r10,-1 # update chunk number -.Lchkloop: - lr %r6,%r7 # set access code to last cc - # we got an exception or we're starting a new - # chunk , we must check if we should - # still try to find valid memory (if we detected - # the amount of available storage), and if we - # have chunks left - xr %r0,%r0 - clr %r0,%r9 # did we detect memory? - je .Ldonemem # if not, leave - chi %r10,0 # do we have chunks left? - je .Ldonemem - alr %r5,%r1 # add 128KB to end of chunk - lr %r4,%r5 # potential new chunk - clr %r5,%r9 # should we go on? - jl .Lloop -.Ldonemem: - l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags -# -# find out if we are running under VM -# - stidp __LC_CPUID # store cpuid - tm __LC_CPUID,0xff # running under VM ? - bno .Lnovm-.LPG1(%r13) - oi 3(%r12),1 # set VM flag -.Lnovm: - lh %r0,__LC_CPUID+4 # get cpu version - chi %r0,0x7490 # running on a P/390 ? - bne .Lnop390-.LPG1(%r13) - oi 3(%r12),4 # set P/390 flag -.Lnop390: - -# -# find out if we have an IEEE fpu -# - mvc __LC_PGM_NEW_PSW(8),.Lpcfpu-.LPG1(%r13) - efpc %r0,0 # test IEEE extract fpc instruction - oi 3(%r12),2 # set IEEE fpu flag -.Lchkfpu: - -# -# find out if we have the CSP instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpccsp-.LPG1(%r13) - la %r0,0 - lr %r1,%r0 - la %r2,4 - csp %r0,%r2 # Test CSP instruction - oi 3(%r12),8 # set CSP flag -.Lchkcsp: - -# -# find out if we have the MVPG instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcmvpg-.LPG1(%r13) - sr %r0,%r0 - la %r1,0 - la %r2,0 - mvpg %r1,%r2 # Test CSP instruction - oi 3(%r12),16 # set MVPG flag -.Lchkmvpg: - -# -# find out if we have the IDTE instruction -# - mvc __LC_PGM_NEW_PSW(8),.Lpcidte-.LPG1(%r13) - .long 0xb2b10000 # store facility list - tm 0xc8,0x08 # check bit for clearing-by-ASCE - bno .Lchkidte-.LPG1(%r13) - lhi %r1,2094 - lhi %r2,0 - .long 0xb98e2001 - oi 3(%r12),0x80 # set IDTE flag -.Lchkidte: - - lpsw .Lentry-.LPG1(13) # jump to _stext in primary-space, - # virtual and never return ... - .align 8 -.Lentry:.long 0x00080000,0x80000000 + _stext -.Lctl: .long 0x04b50002 # cr0: various things - .long 0 # cr1: primary space segment table - .long .Lduct # cr2: dispatchable unit control table - .long 0 # cr3: instruction authorization - .long 0 # cr4: instruction authorization - .long 0xffffffff # cr5: primary-aste origin - .long 0 # cr6: I/O interrupts - .long 0 # cr7: secondary space segment table - .long 0 # cr8: access registers translation - .long 0 # cr9: tracing off - .long 0 # cr10: tracing off - .long 0 # cr11: tracing off - .long 0 # cr12: tracing off - .long 0 # cr13: home space segment table - .long 0xc0000000 # cr14: machine check handling off - .long 0 # cr15: linkage stack operations -.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem -.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu -.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp -.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg -.Lpcidte:.long 0x00080000,0x80000000 + .Lchkidte -.Lmemsize:.long memory_size -.Lmchunk:.long memory_chunk -.Lmflags:.long machine_flags -.Lbss_bgn: .long __bss_start -.Lbss_end: .long _end - - .org PARMAREA-64 -.Lduct: .long 0,0,0,0,0,0,0,0 - .long 0,0,0,0,0,0,0,0 - -# -# params at 10400 (setup.h) -# - .org PARMAREA - .global _pstart -_pstart: - .long 0,0 # IPL_DEVICE - .long 0,RAMDISK_ORIGIN # INITRD_START - .long 0,RAMDISK_SIZE # INITRD_SIZE - - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 - .org 0x11000 -.Lsccb: - .hword 0x1000 # length, one page - .byte 0x00,0x00,0x00 - .byte 0x80 # variable response bit set -.Lsccbr: - .hword 0x00 # response code -.Lscpincr1: - .hword 0x00 -.Lscpa1: - .byte 0x00 - .fill 89,1,0 -.Lscpa2: - .int 0x00 -.Lscpincr2: - .quad 0x00 - .fill 3984,1,0 - .org 0x12000 - .global _pend -_pend: - -#ifdef CONFIG_SHARED_KERNEL - .org 0x100000 +.macro GET_IPL_DEVICE +.Lget_ipl_device: + basr %r12,0 +.LGID: l %r1,0xb8 # get sid + sll %r1,15 # test if subchannel is enabled + srl %r1,31 + ltr %r1,%r1 + bz 0(%r14) # subchannel disabled + l %r1,0xb8 + la %r5,.Lipl_schib-.LGID(%r12) + stsch 0(%r5) # get schib of subchannel + bnz 0(%r14) # schib not available + tm 5(%r5),0x01 # devno valid? + bno 0(%r14) + la %r6,ipl_parameter_flags-.LGID(%r12) + oi 3(%r6),0x01 # set flag + la %r2,ipl_devno-.LGID(%r12) + mvc 0(2,%r2),6(%r5) # store devno + tm 4(%r5),0x80 # qdio capable device? + bno 0(%r14) + oi 3(%r6),0x02 # set flag + + # copy ipl parameters + + lhi %r0,4096 + l %r2,20(%r0) # get address of parameter list + lhi %r3,IPL_PARMBLOCK_ORIGIN + st %r3,20(%r0) + lhi %r4,1 + cr %r2,%r3 # start parameters < destination ? + jl 0f + lhi %r1,1 # copy direction is upwards + j 1f +0: lhi %r1,-1 # copy direction is downwards + ar %r2,%r0 + ar %r3,%r0 + ar %r2,%r1 + ar %r3,%r1 +1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters + ar %r3,%r1 + ar %r2,%r1 + sr %r0,%r4 + jne 1b + b 0(%r14) + + .align 4 +.Lipl_schib: + .rept 13 + .long 0 + .endr + + .globl ipl_parameter_flags +ipl_parameter_flags: + .long 0 + .globl ipl_devno +ipl_devno: + .word 0 +.endm + +#ifdef CONFIG_ARCH_S390X +#include "head64.S" +#else +#include "head31.S" #endif - -# -# startup-code, running in virtual mode -# - .globl _stext -_stext: basr %r13,0 # get base -.LPG2: -# -# Setup stack -# - l %r15,.Linittu-.LPG2(%r13) - mvc __LC_CURRENT(4),__TI_task(%r15) - ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE - st %r15,__LC_KERNEL_STACK # set end of kernel stack - ahi %r15,-96 - xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain - -# check control registers - stctl %c0,%c15,0(%r15) - oi 2(%r15),0x40 # enable sigp emergency signal - oi 0(%r15),0x10 # switch on low address protection - lctl %c0,%c15,0(%r15) - -# - lam 0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess - l %r14,.Lstart-.LPG2(%r13) - basr %r14,%r14 # call start_kernel -# -# We returned from start_kernel ?!? PANIK -# - basr %r13,0 - lpsw .Ldw-.(%r13) # load disabled wait psw -# - .align 8 -.Ldw: .long 0x000a0000,0x00000000 -.Linittu: .long init_thread_union -.Lstart: .long start_kernel -.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 - |