diff options
Diffstat (limited to 'arch/sh/Kconfig')
| -rw-r--r-- | arch/sh/Kconfig | 441 |
1 files changed, 228 insertions, 213 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 038179ecf6a..d8ed6676ae8 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -55,8 +55,21 @@ config GENERIC_TIME config GENERIC_CLOCKEVENTS def_bool n +config SYS_SUPPORTS_PM + bool + config SYS_SUPPORTS_APM_EMULATION bool + select SYS_SUPPORTS_PM + +config SYS_SUPPORTS_SMP + bool + +config SYS_SUPPORTS_NUMA + bool + +config SYS_SUPPORTS_PCI + bool config ARCH_MAY_HAVE_PC_FDC bool @@ -81,24 +94,146 @@ source "init/Kconfig" menu "System type" -config SOLUTION_ENGINE - bool +source "arch/sh/mm/Kconfig" + +menu "Processor features" choice - prompt "SuperH system type" - default SH_UNKNOWN + prompt "Endianess selection" + default CPU_LITTLE_ENDIAN + help + Some SuperH machines can be configured for either little or big + endian byte order. These modes require different kernels. + +config CPU_LITTLE_ENDIAN + bool "Little Endian" + +config CPU_BIG_ENDIAN + bool "Big Endian" + +endchoice + +config SH_FPU + bool "FPU support" + depends on CPU_SH4 + default y + help + Selecting this option will enable support for SH processors that + have FPU units (ie, SH77xx). + + This option must be set in order to enable the FPU. + +config SH_FPU_EMU + bool "FPU emulation support" + depends on !SH_FPU && EXPERIMENTAL + default n + help + Selecting this option will enable support for software FPU emulation. + Most SH-3 users will want to say Y here, whereas most SH-4 users will + want to say N. + +config SH_DSP + bool "DSP support" + default y if SH4AL_DSP || !CPU_SH4 + default n + help + Selecting this option will enable support for SH processors that + have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP). + + This option must be set in order to enable the DSP. + +config SH_ADC + bool "ADC support" + depends on CPU_SH3 + default y + help + Selecting this option will allow the Linux kernel to use SH3 on-chip + ADC module. + + If unsure, say N. + +config SH_STORE_QUEUES + bool "Support for Store Queues" + depends on CPU_SH4 + help + Selecting this option will enable an in-kernel API for manipulating + the store queues integrated in the SH-4 processors. + +config SPECULATIVE_EXECUTION + bool "Speculative subroutine return" + depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL + help + This enables support for a speculative instruction fetch for + subroutine return. There are various pitfalls associated with + this, as outlined in the SH7780 hardware manual. + + If unsure, say N. + +config CPU_HAS_INTEVT + bool + +config CPU_HAS_PINT_IRQ + bool + +config CPU_HAS_MASKREG_IRQ + bool + +config CPU_HAS_INTC2_IRQ + bool + +config CPU_HAS_IPR_IRQ + bool + +config CPU_HAS_SR_RB + bool "CPU has SR.RB" + depends on CPU_SH3 || CPU_SH4 + default y + help + This will enable the use of SR.RB register bank usage. Processors + that are lacking this bit must have another method in place for + accomplishing what is taken care of by the banked registers. + + See <file:Documentation/sh/register-banks.txt> for further + information on SR.RB and register banking in the kernel in general. + +config CPU_HAS_PTEA + bool + +endmenu + +menu "Board support" + +config SOLUTION_ENGINE + bool config SH_SOLUTION_ENGINE bool "SolutionEngine" select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7750 help Select SolutionEngine if configuring for a Hitachi SH7709 or SH7750 evaluation board. +config SH_7206_SOLUTION_ENGINE + bool "SolutionEngine7206" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7206 + help + Select 7206 SolutionEngine if configuring for a Hitachi SH7206 + evaluation board. + +config SH_7619_SOLUTION_ENGINE + bool "SolutionEngine7619" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7619 + help + Select 7619 SolutionEngine if configuring for a Hitachi SH7619 + evaluation board. + config SH_7722_SOLUTION_ENGINE bool "SolutionEngine7722" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7722 + depends on CPU_SUBTYPE_SH7722 help Select 7722 SolutionEngine if configuring for a Hitachi SH772 evaluation board. @@ -106,7 +241,7 @@ config SH_7722_SOLUTION_ENGINE config SH_7751_SOLUTION_ENGINE bool "SolutionEngine7751" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7751 + depends on CPU_SUBTYPE_SH7751 help Select 7751 SolutionEngine if configuring for a Hitachi SH7751 evaluation board. @@ -114,7 +249,8 @@ config SH_7751_SOLUTION_ENGINE config SH_7780_SOLUTION_ENGINE bool "SolutionEngine7780" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7780 + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7780 help Select 7780 SolutionEngine if configuring for a Renesas SH7780 evaluation board. @@ -122,7 +258,7 @@ config SH_7780_SOLUTION_ENGINE config SH_7300_SOLUTION_ENGINE bool "SolutionEngine7300" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7300 + depends on CPU_SUBTYPE_SH7300 help Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V) evaluation board. @@ -130,22 +266,22 @@ config SH_7300_SOLUTION_ENGINE config SH_7343_SOLUTION_ENGINE bool "SolutionEngine7343" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH7343 + depends on CPU_SUBTYPE_SH7343 help Select 7343 SolutionEngine if configuring for a Hitachi SH7343 (SH-Mobile 3AS) evaluation board. config SH_73180_SOLUTION_ENGINE - bool "SolutionEngine73180" + bool "SolutionEngine73180" select SOLUTION_ENGINE - select CPU_SUBTYPE_SH73180 + depends on CPU_SUBTYPE_SH73180 help Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3) evaluation board. config SH_7751_SYSTEMH bool "SystemH7751R" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R help Select SystemH if you are configuring for a Renesas SystemH 7751R evaluation board. @@ -153,20 +289,17 @@ config SH_7751_SYSTEMH config SH_HP6XX bool "HP6XX" select SYS_SUPPORTS_APM_EMULATION + select HD6446X_SERIES + depends on CPU_SUBTYPE_SH7709 help Select HP6XX if configuring for a HP jornada HP6xx. More information (hardware only) at <http://www.hp.com/jornada/>. -config SH_SATURN - bool "Saturn" - select CPU_SUBTYPE_SH7604 - help - Select Saturn if configuring for a SEGA Saturn. - config SH_DREAMCAST bool "Dreamcast" - select CPU_SUBTYPE_SH7091 + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7091 help Select Dreamcast if configuring for a SEGA Dreamcast. More information at @@ -175,6 +308,7 @@ config SH_DREAMCAST config SH_MPC1211 bool "Interface MPC1211" + depends on CPU_SUBTYPE_SH7751 && BROKEN help CTP/PCI-SH02 is a CPU module computer that is produced by Interface Corporation. @@ -182,6 +316,8 @@ config SH_MPC1211 config SH_SH03 bool "Interface CTP/PCI-SH03" + depends on CPU_SUBTYPE_SH7751 && BROKEN + select SYS_SUPPORTS_PCI help CTP/PCI-SH03 is a CPU module computer that is produced by Interface Corporation. @@ -189,7 +325,8 @@ config SH_SH03 config SH_SECUREEDGE5410 bool "SecureEdge5410" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help Select SecureEdge5410 if configuring for a SnapGear SH board. This includes both the OEM SecureEdge products as well as the @@ -197,246 +334,76 @@ config SH_SECUREEDGE5410 config SH_HS7751RVOIP bool "HS7751RVOIP" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R help Select HS7751RVOIP if configuring for a Renesas Technology Sales VoIP board. config SH_7710VOIPGW bool "SH7710-VOIP-GW" - select CPU_SUBTYPE_SH7710 + depends on CPU_SUBTYPE_SH7710 help Select this option to build a kernel for the SH7710 based VOIP GW. config SH_RTS7751R2D bool "RTS7751R2D" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. config SH_HIGHLANDER bool "Highlander" + depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI config SH_EDOSK7705 bool "EDOSK7705" - select CPU_SUBTYPE_SH7705 + depends on CPU_SUBTYPE_SH7705 config SH_SH4202_MICRODEV bool "SH4-202 MicroDev" - select CPU_SUBTYPE_SH4_202 + depends on CPU_SUBTYPE_SH4_202 help Select SH4-202 MicroDev if configuring for a SuperH MicroDev board with an SH4-202 CPU. config SH_LANDISK bool "LANDISK" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help I-O DATA DEVICE, INC. "LANDISK Series" support. config SH_TITAN bool "TITAN" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help Select Titan if you are configuring for a Nimble Microsystems NetEngine NP51R. config SH_SHMIN bool "SHMIN" - select CPU_SUBTYPE_SH7706 + depends on CPU_SUBTYPE_SH7706 help Select SHMIN if configuring for the SHMIN board. -config SH_7206_SOLUTION_ENGINE - bool "SolutionEngine7206" - select CPU_SUBTYPE_SH7206 - help - Select 7206 SolutionEngine if configuring for a Hitachi SH7206 - evaluation board. - -config SH_7619_SOLUTION_ENGINE - bool "SolutionEngine7619" - select CPU_SUBTYPE_SH7619 - help - Select 7619 SolutionEngine if configuring for a Hitachi SH7619 - evaluation board. - config SH_LBOX_RE2 bool "L-BOX RE2" - select CPU_SUBTYPE_SH7751R + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI help Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. -config SH_UNKNOWN - bool "BareCPU" - help - "Bare CPU" aka "unknown" means an SH-based system which is not one - of the specific ones mentioned above, which means you need to enter - all sorts of stuff like CONFIG_MEMORY_START because the config - system doesn't already know what it is. You get a machine vector - without any platform-specific code in it, so things like the RTC may - not work. - - This option is for the early stages of porting to a new machine. - -endchoice +endmenu source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" -source "arch/sh/mm/Kconfig" - -config CF_ENABLER - bool "Compact Flash Enabler support" - depends on SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_SH03 - ---help--- - Compact Flash is a small, removable mass storage device introduced - in 1994 originally as a PCMCIA device. If you say `Y' here, you - compile in support for Compact Flash devices directly connected to - a SuperH processor. A Compact Flash FAQ is available at - <http://www.compactflash.org/faqs/faq.htm>. - - If your board has "Directly Connected" CompactFlash at area 5 or 6, - you may want to enable this option. Then, you can use CF as - primary IDE drive (only tested for SanDisk). - - If in doubt, select 'N'. - -choice - prompt "Compact Flash Connection Area" - depends on CF_ENABLER - default CF_AREA6 - -config CF_AREA5 - bool "Area5" - help - If your board has "Directly Connected" CompactFlash, You should - select the area where your CF is connected to. - - - "Area5" if CompactFlash is connected to Area 5 (0x14000000) - - "Area6" if it is connected to Area 6 (0x18000000) - - "Area6" will work for most boards. - -config CF_AREA6 - bool "Area6" - -endchoice - -config CF_BASE_ADDR - hex - depends on CF_ENABLER - default "0xb8000000" if CF_AREA6 - default "0xb4000000" if CF_AREA5 - -menu "Processor features" - -choice - prompt "Endianess selection" - default CPU_LITTLE_ENDIAN - help - Some SuperH machines can be configured for either little or big - endian byte order. These modes require different kernels. - -config CPU_LITTLE_ENDIAN - bool "Little Endian" - -config CPU_BIG_ENDIAN - bool "Big Endian" - -endchoice - -config SH_FPU - bool "FPU support" - depends on !CPU_SH3 - default y - help - Selecting this option will enable support for SH processors that - have FPU units (ie, SH77xx). - - This option must be set in order to enable the FPU. - -config SH_FPU_EMU - bool "FPU emulation support" - depends on !SH_FPU && EXPERIMENTAL - default n - help - Selecting this option will enable support for software FPU emulation. - Most SH-3 users will want to say Y here, whereas most SH-4 users will - want to say N. - -config SH_DSP - bool "DSP support" - default y if SH4AL_DSP || !CPU_SH4 - default n - help - Selecting this option will enable support for SH processors that - have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP). - - This option must be set in order to enable the DSP. - -config SH_ADC - bool "ADC support" - depends on CPU_SH3 - default y - help - Selecting this option will allow the Linux kernel to use SH3 on-chip - ADC module. - - If unsure, say N. - -config SH_STORE_QUEUES - bool "Support for Store Queues" - depends on CPU_SH4 - help - Selecting this option will enable an in-kernel API for manipulating - the store queues integrated in the SH-4 processors. - -config SPECULATIVE_EXECUTION - bool "Speculative subroutine return" - depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL - help - This enables support for a speculative instruction fetch for - subroutine return. There are various pitfalls associated with - this, as outlined in the SH7780 hardware manual. - - If unsure, say N. - -config CPU_HAS_INTEVT - bool - -config CPU_HAS_PINT_IRQ - bool - -config CPU_HAS_MASKREG_IRQ - bool - -config CPU_HAS_INTC2_IRQ - bool - -config CPU_HAS_IPR_IRQ - bool - -config CPU_HAS_SR_RB - bool "CPU has SR.RB" - depends on CPU_SH3 || CPU_SH4 - default y - help - This will enable the use of SR.RB register bank usage. Processors - that are lacking this bit must have another method in place for - accomplishing what is taken care of by the banked registers. - - See <file:Documentation/sh/register-banks.txt> for further - information on SR.RB and register banking in the kernel in general. - -config CPU_HAS_PTEA - bool - -endmenu - menu "Timer and clock configuration" config SH_TMU @@ -473,13 +440,13 @@ config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343 default "31250000" if CPU_SUBTYPE_SH7619 + default "32000000" if CPU_SUBTYPE_SH7722 default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7206 - default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785 - default "60000000" if CPU_SUBTYPE_SH7751 + default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 + default "50000000" help This option is used to specify the peripheral clock frequency. This is necessary for determining the reference clock value on @@ -487,8 +454,10 @@ config SH_PCLK_FREQ config SH_CLK_MD int "CPU Mode Pin Setting" - default 0 depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 + default 6 if CPU_SUBTYPE_SH7206 + default 5 if CPU_SUBTYPE_SH7619 + default 0 help MD2 - MD0 pin setting. @@ -560,6 +529,7 @@ config CRASH_DUMP config SMP bool "Symmetric multi-processing support" + depends on SYS_SUPPORTS_SMP ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -584,6 +554,7 @@ config NR_CPUS int "Maximum number of CPUs (2-32)" range 2 32 depends on SMP + default "4" if CPU_SHX3 default "2" help This allows you to specify the maximum number of CPUs which this @@ -623,6 +594,7 @@ config BOOT_LINK_OFFSET config UBC_WAKEUP bool "Wakeup UBC on startup" + depends on CPU_SH4 help Selecting this option will wakeup the User Break Controller (UBC) on startup. Although the UBC is left in an awake state when the processor @@ -651,8 +623,8 @@ menu "Bus options" # we're not using PCMCIA, so we make it dependent on # PCMCIA outright. -- PFM. config ISA - bool - default y if PCMCIA + def_bool y + depends on PCMCIA && HD6446X_SERIES help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff @@ -690,6 +662,49 @@ config SUPERHYWAY tristate "SuperHyway Bus support" depends on CPU_SUBTYPE_SH4_202 +config CF_ENABLER + bool "Compact Flash Enabler support" + depends on SOLUTION_ENGINE || SH_SH03 + ---help--- + Compact Flash is a small, removable mass storage device introduced + in 1994 originally as a PCMCIA device. If you say `Y' here, you + compile in support for Compact Flash devices directly connected to + a SuperH processor. A Compact Flash FAQ is available at + <http://www.compactflash.org/faqs/faq.htm>. + + If your board has "Directly Connected" CompactFlash at area 5 or 6, + you may want to enable this option. Then, you can use CF as + primary IDE drive (only tested for SanDisk). + + If in doubt, select 'N'. + +choice + prompt "Compact Flash Connection Area" + depends on CF_ENABLER + default CF_AREA6 + +config CF_AREA5 + bool "Area5" + help + If your board has "Directly Connected" CompactFlash, You should + select the area where your CF is connected to. + + - "Area5" if CompactFlash is connected to Area 5 (0x14000000) + - "Area6" if it is connected to Area 6 (0x18000000) + + "Area6" will work for most boards. + +config CF_AREA6 + bool "Area6" + +endchoice + +config CF_BASE_ADDR + hex + depends on CF_ENABLER + default "0xb8000000" if CF_AREA6 + default "0xb4000000" if CF_AREA5 + source "arch/sh/drivers/pci/Kconfig" source "drivers/pci/Kconfig" @@ -707,7 +722,7 @@ source "fs/Kconfig.binfmt" endmenu menu "Power management options (EXPERIMENTAL)" -depends on EXPERIMENTAL +depends on EXPERIMENTAL && SYS_SUPPORTS_PM source kernel/power/Kconfig |