diff options
Diffstat (limited to 'arch/sh/boards/mach-ecovec24/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-ecovec24/setup.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index a49cce16e78..1135c3b848f 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -696,13 +696,13 @@ static struct platform_device camera_devices[] = { #define FCLKBCR 0xa415000c static void fsimck_init(struct clk *clk) { - u32 status = ctrl_inl(clk->enable_reg); + u32 status = __raw_readl(clk->enable_reg); /* use external clock */ status &= ~0x000000ff; status |= 0x00000080; - ctrl_outl(status, clk->enable_reg); + __raw_writel(status, clk->enable_reg); } static struct clk_ops fsimck_clk_ops = { @@ -853,7 +853,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTG1, 0); gpio_direction_output(GPIO_PTG2, 0); gpio_direction_output(GPIO_PTG3, 0); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); /* enable SH-Eth */ gpio_request(GPIO_PTA1, NULL); @@ -873,16 +873,16 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LNKSTA, NULL); /* enable USB */ - ctrl_outw(0x0000, 0xA4D80000); - ctrl_outw(0x0000, 0xA4D90000); + __raw_writew(0x0000, 0xA4D80000); + __raw_writew(0x0000, 0xA4D90000); gpio_request(GPIO_PTB3, NULL); gpio_request(GPIO_PTB4, NULL); gpio_request(GPIO_PTB5, NULL); gpio_direction_input(GPIO_PTB3); gpio_direction_output(GPIO_PTB4, 0); gpio_direction_output(GPIO_PTB5, 0); - ctrl_outw(0x0600, 0xa40501d4); - ctrl_outw(0x0600, 0xa4050192); + __raw_writew(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa4050192); if (gpio_get_value(GPIO_PTB3)) { printk(KERN_INFO "USB1 function is selected\n"); @@ -923,7 +923,7 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LCDVSYN, NULL); gpio_request(GPIO_FN_LCDDON, NULL); gpio_request(GPIO_FN_LCDLCLK, NULL); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA); gpio_request(GPIO_PTE6, NULL); gpio_request(GPIO_PTU1, NULL); @@ -935,7 +935,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTA2, 0); /* I/O buffer drive ability is high */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); + __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); if (gpio_get_value(GPIO_PTE6)) { /* DVI */ @@ -1067,7 +1067,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTB7, 0); /* I/O buffer drive ability is high for SDHI1 */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); + __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); |