diff options
Diffstat (limited to 'arch/sh/boards/mach-kfr2r09/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-kfr2r09/setup.c | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index bdb10c29ef1..7155be0d115 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -16,6 +16,8 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/i2c.h> +#include <linux/usb/r8a66597.h> #include <video/sh_mobile_lcdc.h> #include <asm/clock.h> #include <asm/machvec.h> @@ -113,6 +115,9 @@ static struct platform_device kfr2r09_sh_keysc_device = { .dev = { .platform_data = &kfr2r09_sh_keysc_info, }, + .archdata = { + .hwblk_id = HWBLK_KEYSC, + }, }; static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { @@ -173,6 +178,38 @@ static struct platform_device kfr2r09_sh_lcdc_device = { .dev = { .platform_data = &kfr2r09_sh_lcdc_info, }, + .archdata = { + .hwblk_id = HWBLK_LCDC, + }, +}; + +static struct r8a66597_platdata kfr2r09_usb0_gadget_data = { + .on_chip = 1, +}; + +static struct resource kfr2r09_usb0_gadget_resources[] = { + [0] = { + .start = 0x04d80000, + .end = 0x04d80123, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct platform_device kfr2r09_usb0_gadget_device = { + .name = "r8a66597_udc", + .id = 0, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &kfr2r09_usb0_gadget_data, + }, + .num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources), + .resource = kfr2r09_usb0_gadget_resources, }; static struct platform_device *kfr2r09_devices[] __initdata = { @@ -186,6 +223,81 @@ static struct platform_device *kfr2r09_devices[] __initdata = { #define BSC_CS0WCR 0xfec10024 #define BSC_CS4BCR 0xfec10010 #define BSC_CS4WCR 0xfec10030 +#define PORT_MSELCRB 0xa4050182 + +#ifdef CONFIG_I2C +static int kfr2r09_usb0_gadget_i2c_setup(void) +{ + struct i2c_adapter *a; + struct i2c_msg msg; + unsigned char buf[2]; + int ret; + + a = i2c_get_adapter(0); + if (!a) + return -ENODEV; + + /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */ + buf[0] = 0x13; + msg.addr = 0x09; + msg.buf = buf; + msg.len = 1; + msg.flags = 0; + ret = i2c_transfer(a, &msg, 1); + if (ret != 1) + return -ENODEV; + + buf[0] = 0; + msg.addr = 0x09; + msg.buf = buf; + msg.len = 1; + msg.flags = I2C_M_RD; + ret = i2c_transfer(a, &msg, 1); + if (ret != 1) + return -ENODEV; + + buf[1] = buf[0] | (1 << 1); + buf[0] = 0x13; + msg.addr = 0x09; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + ret = i2c_transfer(a, &msg, 1); + if (ret != 1) + return -ENODEV; + + return 0; +} +#else +static int kfr2r09_usb0_gadget_i2c_setup(void) +{ + return -ENODEV; +} +#endif + +static int kfr2r09_usb0_gadget_setup(void) +{ + int plugged_in; + + gpio_request(GPIO_PTN4, NULL); /* USB_DET */ + gpio_direction_input(GPIO_PTN4); + plugged_in = gpio_get_value(GPIO_PTN4); + if (!plugged_in) + return -ENODEV; /* no cable plugged in */ + + if (kfr2r09_usb0_gadget_i2c_setup() != 0) + return -ENODEV; /* unable to configure using i2c */ + + ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */ + gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */ + gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */ + msleep(20); /* wait 20ms to let the clock settle */ + clk_enable(clk_get(NULL, "usb0")); + ctrl_outw(0x0600, 0xa40501d4); + + return 0; +} static int __init kfr2r09_devices_setup(void) { @@ -245,6 +357,10 @@ static int __init kfr2r09_devices_setup(void) gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */ gpio_direction_output(GPIO_PTU0, 1); + /* setup USB function */ + if (kfr2r09_usb0_gadget_setup() == 0) + platform_device_register(&kfr2r09_usb0_gadget_device); + return platform_add_devices(kfr2r09_devices, ARRAY_SIZE(kfr2r09_devices)); } |