diff options
Diffstat (limited to 'arch/sh/boards/mach-magicpanelr2')
| -rw-r--r-- | arch/sh/boards/mach-magicpanelr2/Kconfig | 13 | ||||
| -rw-r--r-- | arch/sh/boards/mach-magicpanelr2/Makefile | 5 | ||||
| -rw-r--r-- | arch/sh/boards/mach-magicpanelr2/setup.c | 394 |
3 files changed, 0 insertions, 412 deletions
diff --git a/arch/sh/boards/mach-magicpanelr2/Kconfig b/arch/sh/boards/mach-magicpanelr2/Kconfig deleted file mode 100644 index b0abddc3e84..00000000000 --- a/arch/sh/boards/mach-magicpanelr2/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -if SH_MAGIC_PANEL_R2 - -menu "Magic Panel R2 options" - -config SH_MAGIC_PANEL_R2_VERSION - int SH_MAGIC_PANEL_R2_VERSION - default "3" - help - Set the version of the Magic Panel R2 - -endmenu - -endif diff --git a/arch/sh/boards/mach-magicpanelr2/Makefile b/arch/sh/boards/mach-magicpanelr2/Makefile deleted file mode 100644 index 7a6d586b907..00000000000 --- a/arch/sh/boards/mach-magicpanelr2/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Magic Panel specific parts -# - -obj-y := setup.o
\ No newline at end of file diff --git a/arch/sh/boards/mach-magicpanelr2/setup.c b/arch/sh/boards/mach-magicpanelr2/setup.c deleted file mode 100644 index f3b8b07ea5d..00000000000 --- a/arch/sh/boards/mach-magicpanelr2/setup.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * linux/arch/sh/boards/magicpanel/setup.c - * - * Copyright (C) 2007 Markus Brunner, Mark Jonas - * - * Magic Panel Release 2 board setup - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/map.h> -#include <asm/magicpanelr2.h> -#include <asm/heartbeat.h> - -#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL) - -/* Prefer cmdline over RedBoot */ -static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; - -/* Wait until reset finished. Timeout is 100ms. */ -static int __init ethernet_reset_finished(void) -{ - int i; - - if (LAN9115_READY) - return 1; - - for (i = 0; i < 10; ++i) { - mdelay(10); - if (LAN9115_READY) - return 1; - } - - return 0; -} - -static void __init reset_ethernet(void) -{ - /* PMDR: LAN_RESET=on */ - CLRBITS_OUTB(0x10, PORT_PMDR); - - udelay(200); - - /* PMDR: LAN_RESET=off */ - SETBITS_OUTB(0x10, PORT_PMDR); -} - -static void __init setup_chip_select(void) -{ - /* CS2: LAN (0x08000000 - 0x0bffffff) */ - /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x36db0400, CS2BCR); - /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x000003c0, CS2WCR); - - /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ - /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS4BCR); - /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS4WCR); - - /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ - /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS5ABCR); - /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS5AWCR); - - /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ - /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS5BBCR); - /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS5BWCR); - - /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ - /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS6ABCR); - /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ - ctrl_outl(0x001009C1, CS6AWCR); -} - -static void __init setup_port_multiplexing(void) -{ - /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); - * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); - */ - ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ - - /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); - * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); - */ - ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ - - /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); - * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; - */ - ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ - - /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); - * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); - */ - ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ - - /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; - * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; - */ - ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ - - /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; - * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); - */ - ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ - - /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2); - * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); - */ - ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ - - /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); - * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; - */ - ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ - - /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; - * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; - */ - ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ - - /* K7 (x); K6 (x); K5 (x); K4 (x); - * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY) - */ - ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ - - /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; - * L3 TCK; L2 (x); L1 (x); L0 (x); - */ - ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ - - /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); - * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL); - * M1 CS5B(CAN3_CS); M0 GPI+(nc); - */ - ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ - - /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, - * LAN_RESET=off, BUZZER=off, LCD_BL=off - */ -#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2 - ctrl_outb(0x30, PORT_PMDR); -#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3 - ctrl_outb(0xF0, PORT_PMDR); -#else -#error Unknown revision of PLATFORM_MP_R2 -#endif - - /* P7 (x); P6 (x); P5 (x); - * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ); - * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ) - */ - ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ - ctrl_outb(0x10, PORT_PPDR); - - /* R7 A25; R6 A24; R5 A23; R4 A22; - * R3 A21; R2 A20; R1 A19; R0 A0; - */ - ctrl_outw(0x0000, PORT_PRCR); /* 00 00 00 00 00 00 00 00 */ - - /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); - * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; - */ - ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ - - /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; - * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG) - */ - ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ - - /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); - * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; - */ - ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ - - /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); - * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); - */ - ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ -} - -static void __init mpr2_setup(char **cmdline_p) -{ - __set_io_port_base(0xa0000000); - - /* set Pin Select Register A: - * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, - * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND - */ - ctrl_outw(0xAABC, PORT_PSELA); - /* set Pin Select Register B: - * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, - * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved - */ - ctrl_outw(0x3C00, PORT_PSELB); - /* set Pin Select Register C: - * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved - */ - ctrl_outw(0x0000, PORT_PSELC); - /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, - * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved - */ - ctrl_outw(0x0000, PORT_PSELD); - /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */ - ctrl_outw(0x0101, PORT_UTRCTL); - /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */ - ctrl_outw(0xA5C0, PORT_UCLKCR_W); - - setup_chip_select(); - - setup_port_multiplexing(); - - reset_ethernet(); - - printk(KERN_INFO "Magic Panel Release 2 A.%i\n", - CONFIG_SH_MAGIC_PANEL_R2_VERSION); - - if (ethernet_reset_finished() == 0) - printk(KERN_WARNING "Ethernet not ready\n"); -} - -static struct resource smc911x_resources[] = { - [0] = { - .start = 0xa8000000, - .end = 0xabffffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 35, - .end = 35, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc911x_device = { - .name = "smc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smc911x_resources), - .resource = smc911x_resources, -}; - -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_LED, - .end = PA_LED, - .flags = IORESOURCE_MEM, - }, -}; - -static struct heartbeat_data heartbeat_data = { - .flags = HEARTBEAT_INVERTED, -}; - -static struct platform_device heartbeat_device = { - .name = "heartbeat", - .id = -1, - .dev = { - .platform_data = &heartbeat_data, - }, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, -}; - -static struct mtd_partition *parsed_partitions; - -static struct mtd_partition mpr2_partitions[] = { - /* Reserved for bootloader, read-only */ - { - .name = "Bootloader", - .offset = 0x00000000UL, - .size = MPR2_MTD_BOOTLOADER_SIZE, - .mask_flags = MTD_WRITEABLE, - }, - /* Reserved for kernel image */ - { - .name = "Kernel", - .offset = MTDPART_OFS_NXTBLK, - .size = MPR2_MTD_KERNEL_SIZE, - }, - /* Rest is used for Flash FS */ - { - .name = "Flash_FS", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct physmap_flash_data flash_data = { - .width = 2, -}; - -static struct resource flash_resource = { - .start = 0x00000000, - .end = 0x2000000UL, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device flash_device = { - .name = "physmap-flash", - .id = -1, - .resource = &flash_resource, - .num_resources = 1, - .dev = { - .platform_data = &flash_data, - }, -}; - -static struct mtd_info *flash_mtd; - -static struct map_info mpr2_flash_map = { - .name = "Magic Panel R2 Flash", - .size = 0x2000000UL, - .bankwidth = 2, -}; - -static void __init set_mtd_partitions(void) -{ - int nr_parts = 0; - - simple_map_init(&mpr2_flash_map); - flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map); - nr_parts = parse_mtd_partitions(flash_mtd, probes, - &parsed_partitions, 0); - /* If there is no partition table, used the hard coded table */ - if (nr_parts <= 0) { - flash_data.parts = mpr2_partitions; - flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions); - } else { - flash_data.nr_parts = nr_parts; - flash_data.parts = parsed_partitions; - } -} - -/* - * Add all resources to the platform_device - */ - -static struct platform_device *mpr2_devices[] __initdata = { - &heartbeat_device, - &smc911x_device, - &flash_device, -}; - - -static int __init mpr2_devices_setup(void) -{ - set_mtd_partitions(); - return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); -} -device_initcall(mpr2_devices_setup); - -/* - * Initialize IRQ setting - */ -static void __init init_mpr2_IRQ(void) -{ - plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */ - - set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ - set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ - set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ - set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ - set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ - set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ - - intc_set_priority(32, 13); /* IRQ0 CAN1 */ - intc_set_priority(33, 13); /* IRQ0 CAN2 */ - intc_set_priority(34, 13); /* IRQ0 CAN3 */ - intc_set_priority(35, 6); /* IRQ3 SMSC9115 */ -} - -/* - * The Machine Vector - */ - -static struct sh_machine_vector mv_mpr2 __initmv = { - .mv_name = "mpr2", - .mv_setup = mpr2_setup, - .mv_init_irq = init_mpr2_IRQ, -}; |