diff options
Diffstat (limited to 'arch/sh/boards/mach-se/7724/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-se/7724/setup.c | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index cbfba783ee4..242dc843f57 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -256,12 +256,12 @@ static struct platform_device ceu1_device = { #define FCLKACR 0xa4150008 static void fsimck_init(struct clk *clk) { - u32 status = ctrl_inl(clk->enable_reg); + u32 status = __raw_readl(clk->enable_reg); /* use external clock */ status &= ~0x000000ff; status |= 0x00000080; - ctrl_outl(status, clk->enable_reg); + __raw_writel(status, clk->enable_reg); } static struct clk_ops fsimck_clk_ops = { @@ -522,7 +522,7 @@ static int __init sh_eth_is_eeprom_ready(void) int t = 10000; while (t--) { - if (!ctrl_inw(EEPROM_STAT)) + if (!__raw_readw(EEPROM_STAT)) return 1; cpu_relax(); } @@ -542,13 +542,13 @@ static void __init sh_eth_init(void) /* read MAC addr from EEPROM */ for (i = 0 ; i < 3 ; i++) { - ctrl_outw(0x0, EEPROM_OP); /* read */ - ctrl_outw(i*2, EEPROM_ADR); - ctrl_outw(0x1, EEPROM_STRT); + __raw_writew(0x0, EEPROM_OP); /* read */ + __raw_writew(i*2, EEPROM_ADR); + __raw_writew(0x1, EEPROM_STRT); if (!sh_eth_is_eeprom_ready()) return; - mac = ctrl_inw(EEPROM_DATA); + mac = __raw_readw(EEPROM_DATA); sh_eth_plat.mac_addr[i << 1] = mac & 0xff; sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8; } @@ -585,7 +585,7 @@ arch_initcall(arch_setup); static int __init devices_setup(void) { - u16 sw = ctrl_inw(SW4140); /* select camera, monitor */ + u16 sw = __raw_readw(SW4140); /* select camera, monitor */ struct clk *fsia_clk; /* register board specific self-refresh code */ @@ -595,7 +595,7 @@ static int __init devices_setup(void) &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); /* Reset Release */ - ctrl_outw(ctrl_inw(FPGA_OUT) & + __raw_writew(__raw_readw(FPGA_OUT) & ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ (1 << 7) | /* AK4643 */ @@ -604,7 +604,7 @@ static int __init devices_setup(void) FPGA_OUT); /* turn on USB clocks, use external clock */ - ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); #ifdef CONFIG_PM /* Let LED9 show STATUS2 */ @@ -633,10 +633,10 @@ static int __init devices_setup(void) #endif /* enable USB0 port */ - ctrl_outw(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa40501d4); /* enable USB1 port */ - ctrl_outw(0x0600, 0xa4050192); + __raw_writew(0x0600, 0xa4050192); /* enable IRQ 0,1,2 */ gpio_request(GPIO_FN_INTC_IRQ0, NULL); @@ -684,7 +684,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_LCDVCPWC, NULL); gpio_request(GPIO_FN_LCDRD, NULL); gpio_request(GPIO_FN_LCDLCLK, NULL); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA); /* enable CEU0 */ gpio_request(GPIO_FN_VIO0_D15, NULL); |