summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards/mach-se/7724/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-se/7724/setup.c')
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c110
1 files changed, 98 insertions, 12 deletions
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 15456a0773b..00973e0f8c6 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -39,7 +39,15 @@
* SW41 : abxx xxxx -> a = 0 : Analog monitor
* 1 : Digital monitor
* b = 0 : VGA
- * 1 : SVGA
+ * 1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
*/
/* Heartbeat */
@@ -158,7 +166,7 @@ static struct resource lcdc_resources[] = {
[0] = {
.name = "LCDC",
.start = 0xfe940000,
- .end = 0xfe941fff,
+ .end = 0xfe942fff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -174,6 +182,9 @@ static struct platform_device lcdc_device = {
.dev = {
.platform_data = &lcdc_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_LCDC,
+ },
};
/* CEU0 */
@@ -205,6 +216,9 @@ static struct platform_device ceu0_device = {
.dev = {
.platform_data = &sh_mobile_ceu0_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_CEU0,
+ },
};
/* CEU1 */
@@ -236,6 +250,9 @@ static struct platform_device ceu1_device = {
.dev = {
.platform_data = &sh_mobile_ceu1_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_CEU1,
+ },
};
/* KEYSC in SoC (Needs SW33-2 set to ON) */
@@ -274,6 +291,9 @@ static struct platform_device keysc_device = {
.dev = {
.platform_data = &keysc_info,
},
+ .archdata = {
+ .hwblk_id = HWBLK_KEYSC,
+ },
};
/* SH Eth */
@@ -302,15 +322,19 @@ static struct platform_device sh_eth_device = {
},
.num_resources = ARRAY_SIZE(sh_eth_resources),
.resource = sh_eth_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_ETHER,
+ },
};
static struct r8a66597_platdata sh7724_usb0_host_data = {
+ .on_chip = 1,
};
static struct resource sh7724_usb0_host_resources[] = {
[0] = {
.start = 0xa4d80000,
- .end = 0xa4d800ff,
+ .end = 0xa4d80124 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -330,6 +354,38 @@ static struct platform_device sh7724_usb0_host_device = {
},
.num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
.resource = sh7724_usb0_host_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_USB0,
+ },
+};
+
+static struct r8a66597_platdata sh7724_usb1_gadget_data = {
+ .on_chip = 1,
+};
+
+static struct resource sh7724_usb1_gadget_resources[] = {
+ [0] = {
+ .start = 0xa4d90000,
+ .end = 0xa4d90123,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 66,
+ .end = 66,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct platform_device sh7724_usb1_gadget_device = {
+ .name = "r8a66597_udc",
+ .id = 1, /* USB1 */
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &sh7724_usb1_gadget_data,
+ },
+ .num_resources = ARRAY_SIZE(sh7724_usb1_gadget_resources),
+ .resource = sh7724_usb1_gadget_resources,
};
static struct platform_device *ms7724se_devices[] __initdata = {
@@ -342,6 +398,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
&keysc_device,
&sh_eth_device,
&sh7724_usb0_host_device,
+ &sh7724_usb1_gadget_device,
};
#define EEPROM_OP 0xBA206000
@@ -421,9 +478,38 @@ static int __init devices_setup(void)
/* turn on USB clocks, use external clock */
ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+#ifdef CONFIG_PM
+ /* Let LED9 show STATUS2 */
+ gpio_request(GPIO_FN_STATUS2, NULL);
+
+ /* Lit LED10 show STATUS0 */
+ gpio_request(GPIO_FN_STATUS0, NULL);
+
+ /* Lit LED11 show PDSTATUS */
+ gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
+ /* Lit LED9 */
+ gpio_request(GPIO_PTJ6, NULL);
+ gpio_direction_output(GPIO_PTJ6, 1);
+ gpio_export(GPIO_PTJ6, 0);
+
+ /* Lit LED10 */
+ gpio_request(GPIO_PTJ5, NULL);
+ gpio_direction_output(GPIO_PTJ5, 1);
+ gpio_export(GPIO_PTJ5, 0);
+
+ /* Lit LED11 */
+ gpio_request(GPIO_PTJ7, NULL);
+ gpio_direction_output(GPIO_PTJ7, 1);
+ gpio_export(GPIO_PTJ7, 0);
+#endif
+
/* enable USB0 port */
ctrl_outw(0x0600, 0xa40501d4);
+ /* enable USB1 port */
+ ctrl_outw(0x0600, 0xa4050192);
+
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
@@ -546,15 +632,15 @@ static int __init devices_setup(void)
sh_eth_init();
if (sw & SW41_B) {
- /* SVGA */
- lcdc_info.ch[0].lcd_cfg.xres = 800;
- lcdc_info.ch[0].lcd_cfg.yres = 600;
- lcdc_info.ch[0].lcd_cfg.left_margin = 142;
- lcdc_info.ch[0].lcd_cfg.right_margin = 52;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
+ /* 720p */
+ lcdc_info.ch[0].lcd_cfg.xres = 1280;
+ lcdc_info.ch[0].lcd_cfg.yres = 720;
+ lcdc_info.ch[0].lcd_cfg.left_margin = 220;
+ lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+ lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
+ lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+ lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+ lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
} else {
/* VGA */
lcdc_info.ch[0].lcd_cfg.xres = 640;