summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards/overdrive/fpga.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/overdrive/fpga.c')
-rw-r--r--arch/sh/boards/overdrive/fpga.c134
1 files changed, 134 insertions, 0 deletions
diff --git a/arch/sh/boards/overdrive/fpga.c b/arch/sh/boards/overdrive/fpga.c
new file mode 100644
index 00000000000..3a1ec940344
--- /dev/null
+++ b/arch/sh/boards/overdrive/fpga.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * This file handles programming up the Altera Flex10K that interfaces to
+ * the Galileo, and does the PS/2 keyboard and mouse
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+
+#include <asm/overdriver/gt64111.h>
+#include <asm/overdrive/overdrive.h>
+#include <asm/overdrive/fpga.h>
+
+#define FPGA_NotConfigHigh() (*FPGA_ControlReg) = (*FPGA_ControlReg) | ENABLE_FPGA_BIT
+#define FPGA_NotConfigLow() (*FPGA_ControlReg) = (*FPGA_ControlReg) & RESET_FPGA_MASK
+
+/* I need to find out what (if any) the real delay factor here is */
+/* The delay is definately not critical */
+#define long_delay() {int i;for(i=0;i<10000;i++);}
+#define short_delay() {int i;for(i=0;i<100;i++);}
+
+static void __init program_overdrive_fpga(const unsigned char *fpgacode,
+ int size)
+{
+ int timeout = 0;
+ int i, j;
+ unsigned char b;
+ static volatile unsigned char *FPGA_ControlReg =
+ (volatile unsigned char *) (OVERDRIVE_CTRL);
+ static volatile unsigned char *FPGA_ProgramReg =
+ (volatile unsigned char *) (FPGA_DCLK_ADDRESS);
+
+ printk("FPGA: Commencing FPGA Programming\n");
+
+ /* The PCI reset but MUST be low when programming the FPGA !!! */
+ b = (*FPGA_ControlReg) & RESET_PCI_MASK;
+
+ (*FPGA_ControlReg) = b;
+
+ /* Prepare FPGA to program */
+
+ FPGA_NotConfigHigh();
+ long_delay();
+
+ FPGA_NotConfigLow();
+ short_delay();
+
+ while ((*FPGA_ProgramReg & FPGA_NOT_STATUS) != 0) {
+ printk("FPGA: Waiting for NotStatus to go Low ... \n");
+ }
+
+ FPGA_NotConfigHigh();
+
+ /* Wait for FPGA "ready to be programmed" signal */
+ printk("FPGA: Waiting for NotStatus to go high (FPGA ready)... \n");
+
+ for (timeout = 0;
+ (((*FPGA_ProgramReg & FPGA_NOT_STATUS) == 0)
+ && (timeout < FPGA_TIMEOUT)); timeout++);
+
+ /* Check if timeout condition occured - i.e. an error */
+
+ if (timeout == FPGA_TIMEOUT) {
+ printk
+ ("FPGA: Failed to program - Timeout waiting for notSTATUS to go high\n");
+ return;
+ }
+
+ printk("FPGA: Copying data to FPGA ... %d bytes\n", size);
+
+ /* Copy array to FPGA - bit at a time */
+
+ for (i = 0; i < size; i++) {
+ volatile unsigned w = 0;
+
+ for (j = 0; j < 8; j++) {
+ *FPGA_ProgramReg = (fpgacode[i] >> j) & 0x01;
+ short_delay();
+ }
+ if ((i & 0x3ff) == 0) {
+ printk(".");
+ }
+ }
+
+ /* Waiting for CONFDONE to go high - means the program is complete */
+
+ for (timeout = 0;
+ (((*FPGA_ProgramReg & FPGA_CONFDONE) == 0)
+ && (timeout < FPGA_TIMEOUT)); timeout++) {
+
+ *FPGA_ProgramReg = 0x0;
+ long_delay();
+ }
+
+ if (timeout == FPGA_TIMEOUT) {
+ printk
+ ("FPGA: Failed to program - Timeout waiting for CONFDONE to go high\n");
+ return;
+ } else { /* Clock another 10 times - gets the device into a working state */
+ for (i = 0; i < 10; i++) {
+ *FPGA_ProgramReg = 0x0;
+ short_delay();
+ }
+ }
+
+ printk("FPGA: Programming complete\n");
+}
+
+
+static const unsigned char __init fpgacode[] = {
+#include "./overdrive.ttf" /* Code from maxplus2 compiler */
+ , 0, 0
+};
+
+
+int __init init_overdrive_fpga(void)
+{
+ program_overdrive_fpga(fpgacode, sizeof(fpgacode));
+
+ return 0;
+}